--- _id: '12049' author: - first_name: Holger full_name: Borcherding, Holger id: '1693' last_name: Borcherding - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Tobias full_name: Müller, Tobias id: '59014' last_name: Müller - first_name: Patrick full_name: Ehlert, Patrick id: '62091' last_name: Ehlert citation: ama: 'Borcherding H, Springer A, Müller T, Ehlert P. 3D-Metalcore-LDS-Circuit-Board; 3D-Leiterkartenaufbau mittels Polymerbeschichtungen von Metallsubstraten und Laser-Direkt-Strukturierung für kompakte leistungselektronische Applikationen : FHprofUnt 2018 : 3D-MC2B : Schlussbericht : Laufzeit des Vorhabens: 01.08.19 bis 31.10.22. Technische Hochschule Ostwestfalen-Lippe; 2023. doi:10.2314/KXP:1881717380' apa: 'Borcherding, H., Springer, A., Müller, T., & Ehlert, P. (2023). 3D-Metalcore-LDS-Circuit-Board; 3D-Leiterkartenaufbau mittels Polymerbeschichtungen von Metallsubstraten und Laser-Direkt-Strukturierung für kompakte leistungselektronische Applikationen : FHprofUnt 2018 : 3D-MC2B : Schlussbericht : Laufzeit des Vorhabens: 01.08.19 bis 31.10.22. Technische Hochschule Ostwestfalen-Lippe. https://doi.org/10.2314/KXP:1881717380' bjps: 'Borcherding H et al. (2023) 3D-Metalcore-LDS-Circuit-Board; 3D-Leiterkartenaufbau mittels Polymerbeschichtungen von Metallsubstraten und Laser-Direkt-Strukturierung für kompakte leistungselektronische Applikationen : FHprofUnt 2018 : 3D-MC2B : Schlussbericht : Laufzeit des Vorhabens: 01.08.19 bis 31.10.22. Lemgo: Technische Hochschule Ostwestfalen-Lippe.' chicago: 'Borcherding, Holger, André Springer, Tobias Müller, and Patrick Ehlert. 3D-Metalcore-LDS-Circuit-Board; 3D-Leiterkartenaufbau mittels Polymerbeschichtungen von Metallsubstraten und Laser-Direkt-Strukturierung für kompakte leistungselektronische Applikationen : FHprofUnt 2018 : 3D-MC2B : Schlussbericht : Laufzeit des Vorhabens: 01.08.19 bis 31.10.22. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2023. https://doi.org/10.2314/KXP:1881717380.' chicago-de: 'Borcherding, Holger, André Springer, Tobias Müller und Patrick Ehlert. 2023. 3D-Metalcore-LDS-Circuit-Board; 3D-Leiterkartenaufbau mittels Polymerbeschichtungen von Metallsubstraten und Laser-Direkt-Strukturierung für kompakte leistungselektronische Applikationen : FHprofUnt 2018 : 3D-MC2B : Schlussbericht : Laufzeit des Vorhabens: 01.08.19 bis 31.10.22. Lemgo: Technische Hochschule Ostwestfalen-Lippe. doi:10.2314/KXP:1881717380, .' din1505-2-1: 'Borcherding, Holger ; Springer, André ; Müller, Tobias ; Ehlert, Patrick: 3D-Metalcore-LDS-Circuit-Board; 3D-Leiterkartenaufbau mittels Polymerbeschichtungen von Metallsubstraten und Laser-Direkt-Strukturierung für kompakte leistungselektronische Applikationen : FHprofUnt 2018 : 3D-MC2B : Schlussbericht : Laufzeit des Vorhabens: 01.08.19 bis 31.10.22. Lemgo : Technische Hochschule Ostwestfalen-Lippe, 2023' havard: 'H. Borcherding, A. Springer, T. Müller, P. Ehlert, 3D-Metalcore-LDS-Circuit-Board; 3D-Leiterkartenaufbau mittels Polymerbeschichtungen von Metallsubstraten und Laser-Direkt-Strukturierung für kompakte leistungselektronische Applikationen : FHprofUnt 2018 : 3D-MC2B : Schlussbericht : Laufzeit des Vorhabens: 01.08.19 bis 31.10.22, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2023.' ieee: 'H. Borcherding, A. Springer, T. Müller, and P. Ehlert, 3D-Metalcore-LDS-Circuit-Board; 3D-Leiterkartenaufbau mittels Polymerbeschichtungen von Metallsubstraten und Laser-Direkt-Strukturierung für kompakte leistungselektronische Applikationen : FHprofUnt 2018 : 3D-MC2B : Schlussbericht : Laufzeit des Vorhabens: 01.08.19 bis 31.10.22. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2023. doi: 10.2314/KXP:1881717380.' mla: 'Borcherding, Holger, et al. 3D-Metalcore-LDS-Circuit-Board; 3D-Leiterkartenaufbau mittels Polymerbeschichtungen von Metallsubstraten und Laser-Direkt-Strukturierung für kompakte leistungselektronische Applikationen : FHprofUnt 2018 : 3D-MC2B : Schlussbericht : Laufzeit des Vorhabens: 01.08.19 bis 31.10.22. Technische Hochschule Ostwestfalen-Lippe, 2023, https://doi.org/10.2314/KXP:1881717380.' short: 'H. Borcherding, A. Springer, T. Müller, P. Ehlert, 3D-Metalcore-LDS-Circuit-Board; 3D-Leiterkartenaufbau mittels Polymerbeschichtungen von Metallsubstraten und Laser-Direkt-Strukturierung für kompakte leistungselektronische Applikationen : FHprofUnt 2018 : 3D-MC2B : Schlussbericht : Laufzeit des Vorhabens: 01.08.19 bis 31.10.22, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2023.' ufg: 'Borcherding, Holger u. a.: 3D-Metalcore-LDS-Circuit-Board; 3D-Leiterkartenaufbau mittels Polymerbeschichtungen von Metallsubstraten und Laser-Direkt-Strukturierung für kompakte leistungselektronische Applikationen : FHprofUnt 2018 : 3D-MC2B : Schlussbericht : Laufzeit des Vorhabens: 01.08.19 bis 31.10.22, Lemgo 2023.' van: 'Borcherding H, Springer A, Müller T, Ehlert P. 3D-Metalcore-LDS-Circuit-Board; 3D-Leiterkartenaufbau mittels Polymerbeschichtungen von Metallsubstraten und Laser-Direkt-Strukturierung für kompakte leistungselektronische Applikationen : FHprofUnt 2018 : 3D-MC2B : Schlussbericht : Laufzeit des Vorhabens: 01.08.19 bis 31.10.22. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2023. 26 p.' date_created: 2024-11-22T13:52:34Z date_updated: 2024-11-27T14:18:19Z department: - _id: DEP7037 - _id: DEP5018 doi: 10.2314/KXP:1881717380 language: - iso: ger page: '26' place: Lemgo publication_status: published publisher: Technische Hochschule Ostwestfalen-Lippe report_number: 13FH160PX8 status: public title: '3D-Metalcore-LDS-Circuit-Board; 3D-Leiterkartenaufbau mittels Polymerbeschichtungen von Metallsubstraten und Laser-Direkt-Strukturierung für kompakte leistungselektronische Applikationen : FHprofUnt 2018 : 3D-MC²B : Schlussbericht : Laufzeit des Vorhabens: 01.08.19 bis 31.10.22' type: research_paper user_id: '83781' year: '2023' ... --- _id: '10545' abstract: - lang: eng text: Additive manufacturing provides a lucrative alternative for manufacturing of functional prototypes. This paper emonstrates the manufacturing and characterization of hollow core waveguide prototypes with circular cross section using suitable metal and polymers for Terahertz sensing applications. These additively manufactured waveguide prototypes are characterized from 0.1 to 1.25 THz to evaluate the attenuation and coupling losses. author: - first_name: Abhijeet Narendra full_name: Shrotri, Abhijeet Narendra id: '74090' last_name: Shrotri orcid: 0000-0003-2116-156X - first_name: Amlan kusum full_name: Mukherjee, Amlan kusum last_name: Mukherjee - first_name: Sven full_name: Lohöfener, Sven id: '46531' last_name: Lohöfener - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Oliver full_name: Stübbe, Oliver id: '51864' last_name: Stübbe orcid: https://orcid.org/0000-0001-7293-6893 - first_name: Sascha full_name: Preu, Sascha last_name: Preu citation: ama: Shrotri AN, Mukherjee A kusum, Lohöfener S, Springer A, Stübbe O, Preu S. Additive Manufacturing and Characterization of Hollow Core Metal and Topas Waveguides for Terahertz Sensor Systems. (Cooke DG, ed.). IEEE; 2023. doi:10.1109/IRMMW-THz57677.2023.10299134 apa: 'Shrotri, A. N., Mukherjee, A. kusum, Lohöfener, S., Springer, A., Stübbe, O., & Preu, S. (2023). Additive manufacturing and characterization of hollow core metal and topas waveguides for Terahertz sensor systems. In D. G. Cooke (Ed.), IRMMW-THz 2023 : 48th International Conference on Infrared, Millimeter and Terahertz Waves : 17-22 September 2023, Montreal, Quebec, Canada. IEEE. https://doi.org/10.1109/IRMMW-THz57677.2023.10299134' bjps: 'Shrotri AN et al. (2023) Additive Manufacturing and Characterization of Hollow Core Metal and Topas Waveguides for Terahertz Sensor Systems, Cooke DG (ed.). [Piscataway, NJ]: IEEE.' chicago: 'Shrotri, Abhijeet Narendra, Amlan kusum Mukherjee, Sven Lohöfener, André Springer, Oliver Stübbe, and Sascha Preu. Additive Manufacturing and Characterization of Hollow Core Metal and Topas Waveguides for Terahertz Sensor Systems. Edited by David G. Cooke. IRMMW-THz 2023 : 48th International Conference on Infrared, Millimeter and Terahertz Waves : 17-22 September 2023, Montreal, Quebec, Canada. [Piscataway, NJ]: IEEE, 2023. https://doi.org/10.1109/IRMMW-THz57677.2023.10299134.' chicago-de: 'Shrotri, Abhijeet Narendra, Amlan kusum Mukherjee, Sven Lohöfener, André Springer, Oliver Stübbe und Sascha Preu. 2023. Additive manufacturing and characterization of hollow core metal and topas waveguides for Terahertz sensor systems. Hg. von David G. Cooke. IRMMW-THz 2023 : 48th International Conference on Infrared, Millimeter and Terahertz Waves : 17-22 September 2023, Montreal, Quebec, Canada. [Piscataway, NJ]: IEEE. doi:10.1109/IRMMW-THz57677.2023.10299134, .' din1505-2-1: 'Shrotri, Abhijeet Narendra ; Mukherjee, Amlan kusum ; Lohöfener, Sven ; Springer, André ; Stübbe, Oliver ; Preu, Sascha ; Cooke, D. G. (Hrsg.): Additive manufacturing and characterization of hollow core metal and topas waveguides for Terahertz sensor systems. [Piscataway, NJ] : IEEE, 2023' havard: A.N. Shrotri, A. kusum Mukherjee, S. Lohöfener, A. Springer, O. Stübbe, S. Preu, Additive manufacturing and characterization of hollow core metal and topas waveguides for Terahertz sensor systems, IEEE, [Piscataway, NJ], 2023. ieee: 'A. N. Shrotri, A. kusum Mukherjee, S. Lohöfener, A. Springer, O. Stübbe, and S. Preu, Additive manufacturing and characterization of hollow core metal and topas waveguides for Terahertz sensor systems. [Piscataway, NJ]: IEEE, 2023. doi: 10.1109/IRMMW-THz57677.2023.10299134.' mla: 'Shrotri, Abhijeet Narendra, et al. “Additive Manufacturing and Characterization of Hollow Core Metal and Topas Waveguides for Terahertz Sensor Systems.” IRMMW-THz 2023 : 48th International Conference on Infrared, Millimeter and Terahertz Waves : 17-22 September 2023, Montreal, Quebec, Canada, edited by David G. Cooke, IEEE, 2023, https://doi.org/10.1109/IRMMW-THz57677.2023.10299134.' short: A.N. Shrotri, A. kusum Mukherjee, S. Lohöfener, A. Springer, O. Stübbe, S. Preu, Additive Manufacturing and Characterization of Hollow Core Metal and Topas Waveguides for Terahertz Sensor Systems, IEEE, [Piscataway, NJ], 2023. ufg: 'Shrotri, Abhijeet Narendra u. a.: Additive manufacturing and characterization of hollow core metal and topas waveguides for Terahertz sensor systems, hg. von Cooke, David G., [Piscataway, NJ] 2023.' van: 'Shrotri AN, Mukherjee A kusum, Lohöfener S, Springer A, Stübbe O, Preu S. Additive manufacturing and characterization of hollow core metal and topas waveguides for Terahertz sensor systems. Cooke DG, editor. IRMMW-THz 2023 : 48th International Conference on Infrared, Millimeter and Terahertz Waves : 17-22 September 2023, Montreal, Quebec, Canada. [Piscataway, NJ]: IEEE; 2023.' conference: end_date: 2023-09-22 location: Montreal, Canada name: 48. International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz) start_date: 2023-09-17 date_created: 2023-09-29T12:34:37Z date_updated: 2025-06-12T13:48:00Z department: - _id: DEP5020 - _id: DEP6020 - _id: DEP5000 doi: 10.1109/IRMMW-THz57677.2023.10299134 editor: - first_name: David G. full_name: Cooke, David G. last_name: Cooke language: - iso: eng place: '[Piscataway, NJ]' publication: 'IRMMW-THz 2023 : 48th International Conference on Infrared, Millimeter and Terahertz Waves : 17-22 September 2023, Montreal, Quebec, Canada' publication_identifier: eissn: - '2162-2035 ' isbn: - 979-8-3503-3660-3 - 979-8-3503-3661-0 issn: - '2162-2027 ' publication_status: published publisher: IEEE status: public title: Additive manufacturing and characterization of hollow core metal and topas waveguides for Terahertz sensor systems type: conference_editor_article user_id: '83781' year: '2023' ... --- _id: '7844' abstract: - lang: eng text: "The CMID (Coated Metal Interconnected Device) technology described here has its origins in MID (Moulded Intercon-\r\nnected Device) technology, which in itself is based on laser direct structuring (LDS). CMIDs are metallic base bodies \r\ncoated with LDS-compatiblepowder, allowing conductor paths to be structured and metallised on the coating. The metallic base bodies enable the heat management to be optimised and allow power electronic topologies to be implemented in addition to control electronics. Furthermore, in the context of 3D electronics, miniaturisation can be advanced through the use of unused spaces and housing parts. This is shown by manufacturing techniques and demonstrators of motor integrated inverters." author: - first_name: Holger full_name: Borcherding, Holger id: '1693' last_name: Borcherding - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Tobias full_name: Müller, Tobias id: '59014' last_name: Müller - first_name: Patrick full_name: Ehlert, Patrick id: '62091' last_name: Ehlert - first_name: Andreas full_name: Tolksdorf, Andreas last_name: Tolksdorf citation: ama: Borcherding H, Springer A, Müller T, Ehlert P, Tolksdorf A. Integration of Power Electronic Circuits Using Coated Metal Interconnect Devices (CMID). Vol 165. (VDE ETG, ed.). VDE-Verlag; 2022:500-507. apa: 'Borcherding, H., Springer, A., Müller, T., Ehlert, P., & Tolksdorf, A. (2022). Integration of power electronic circuits using Coated Metal Interconnect Devices (CMID). In VDE ETG (Ed.),   ETG-Fb. 165: CIPS 2022 : 12th International Conference on Integrated Power Electronics Systems, Proceedings, March, 15 – 17, 2022, Berlin, Germany (Vol. 165, pp. 500–507). VDE-Verlag.' bjps: 'Borcherding H et al. (2022) Integration of Power Electronic Circuits Using Coated Metal Interconnect Devices (CMID), VDE ETG (ed.). Berlin: VDE-Verlag.' chicago: 'Borcherding, Holger, André Springer, Tobias Müller, Patrick Ehlert, and Andreas Tolksdorf. Integration of Power Electronic Circuits Using Coated Metal Interconnect Devices (CMID). Edited by VDE ETG.   ETG-Fb. 165: CIPS 2022 : 12th International Conference on Integrated Power Electronics Systems, Proceedings, March, 15 – 17, 2022, Berlin, Germany. Vol. 165. ETG-Fachberichte. Berlin: VDE-Verlag, 2022.' chicago-de: 'Borcherding, Holger, André Springer, Tobias Müller, Patrick Ehlert und Andreas Tolksdorf. 2022. Integration of power electronic circuits using Coated Metal Interconnect Devices (CMID). Hg. von VDE ETG.   ETG-Fb. 165: CIPS 2022 : 12th International Conference on Integrated Power Electronics Systems, Proceedings, March, 15 – 17, 2022, Berlin, Germany. Bd. 165. ETG-Fachberichte. Berlin: VDE-Verlag.' din1505-2-1: 'Borcherding, Holger ; Springer, André ; Müller, Tobias ; Ehlert, Patrick ; Tolksdorf, Andreas ; VDE ETG (Hrsg.): Integration of power electronic circuits using Coated Metal Interconnect Devices (CMID), ETG-Fachberichte. Bd. 165. Berlin : VDE-Verlag, 2022' havard: H. Borcherding, A. Springer, T. Müller, P. Ehlert, A. Tolksdorf, Integration of power electronic circuits using Coated Metal Interconnect Devices (CMID), VDE-Verlag, Berlin, 2022. ieee: 'H. Borcherding, A. Springer, T. Müller, P. Ehlert, and A. Tolksdorf, Integration of power electronic circuits using Coated Metal Interconnect Devices (CMID), vol. 165. Berlin: VDE-Verlag, 2022, pp. 500–507.' mla: 'Borcherding, Holger, et al. “Integration of Power Electronic Circuits Using Coated Metal Interconnect Devices (CMID).”   ETG-Fb. 165: CIPS 2022 : 12th International Conference on Integrated Power Electronics Systems, Proceedings, March, 15 – 17, 2022, Berlin, Germany, edited by VDE ETG, vol. 165, VDE-Verlag, 2022, pp. 500–07.' short: H. Borcherding, A. Springer, T. Müller, P. Ehlert, A. Tolksdorf, Integration of Power Electronic Circuits Using Coated Metal Interconnect Devices (CMID), VDE-Verlag, Berlin, 2022. ufg: 'Borcherding, Holger u. a.: Integration of power electronic circuits using Coated Metal Interconnect Devices (CMID), Bd. 165, hg. von VDE ETG, Berlin 2022 ( ETG-Fachberichte).' van: 'Borcherding H, Springer A, Müller T, Ehlert P, Tolksdorf A. Integration of power electronic circuits using Coated Metal Interconnect Devices (CMID). VDE ETG, editor.   ETG-Fb. 165: CIPS 2022 : 12th International Conference on Integrated Power Electronics Systems, Proceedings, March, 15 – 17, 2022, Berlin, Germany. Berlin: VDE-Verlag; 2022. ( ETG-Fachberichte; vol. 165).' conference: end_date: 2022-03-17 location: Berlin name: 12th Int. Conference on Integrated Power Electronics Systems start_date: 2022-03-15 corporate_editor: - VDE ETG date_created: 2022-04-29T15:50:44Z date_updated: 2024-08-08T13:37:57Z department: - _id: DEP6020 - _id: DEP7037 - _id: DEP5018 intvolume: ' 165' language: - iso: eng main_file_link: - url: https://content-select.com/goto/62610b94-22cc-42ee-a46f-3c198677ec64/514/language:de page: 500-507 place: Berlin publication: "\t ETG-Fb. 165: CIPS 2022 : 12th International Conference on Integrated Power Electronics Systems, Proceedings, March, 15 – 17, 2022, Berlin, Germany" publication_identifier: eisbn: - 978-3-8007-5758-9 isbn: - 978-3-8007-5757-2 publication_status: published publisher: VDE-Verlag quality_controlled: '1' series_title: ' ETG-Fachberichte' status: public title: Integration of power electronic circuits using Coated Metal Interconnect Devices (CMID) type: conference_editor_article user_id: '83781' volume: 165 year: '2022' ... --- _id: '7841' author: - first_name: Florian full_name: Hemmelgarn, Florian last_name: Hemmelgarn - first_name: Patrick full_name: Ehlert, Patrick id: '62091' last_name: Ehlert - first_name: Thomas full_name: Mager, Thomas last_name: Mager - first_name: Christoph full_name: Jurgenhake, Christoph last_name: Jurgenhake - first_name: Roman full_name: Dumitrescu, Roman last_name: Dumitrescu - first_name: André full_name: Springer, André id: '71733' last_name: Springer citation: ama: Hemmelgarn F, Ehlert P, Mager T, Jurgenhake C, Dumitrescu R, Springer A. Evaluation of Different Additive Manufacturing Technologies for MIDs in the Context of Smart Sensor Systems for Retrofit Applications. IEEE; 2021. doi:10.1109/mid50463.2021.9361628 apa: 'Hemmelgarn, F., Ehlert, P., Mager, T., Jurgenhake, C., Dumitrescu, R., & Springer, A. (2021). Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications. 14th International Congress Molded Interconnect Devices (MID). Amberg: IEEE. https://doi.org/10.1109/mid50463.2021.9361628' bjps: Hemmelgarn F et al. (2021) Evaluation of Different Additive Manufacturing Technologies for MIDs in the Context of Smart Sensor Systems for Retrofit Applications. IEEE. chicago: Hemmelgarn, Florian, Patrick Ehlert, Thomas Mager, Christoph Jurgenhake, Roman Dumitrescu, and André Springer. Evaluation of Different Additive Manufacturing Technologies for MIDs in the Context of Smart Sensor Systems for Retrofit Applications. 14th International Congress Molded Interconnect Devices (MID). IEEE, 2021. https://doi.org/10.1109/mid50463.2021.9361628. chicago-de: Hemmelgarn, Florian, Patrick Ehlert, Thomas Mager, Christoph Jurgenhake, Roman Dumitrescu und André Springer. 2021. Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications. 14th International Congress Molded Interconnect Devices (MID). IEEE. doi:10.1109/mid50463.2021.9361628, . din1505-2-1: 'Hemmelgarn, Florian ; Ehlert, Patrick ; Mager, Thomas ; Jurgenhake, Christoph ; Dumitrescu, Roman ; Springer, André: Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications : IEEE, 2021' havard: F. Hemmelgarn, P. Ehlert, T. Mager, C. Jurgenhake, R. Dumitrescu, A. Springer, Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications, IEEE, 2021. ieee: F. Hemmelgarn, P. Ehlert, T. Mager, C. Jurgenhake, R. Dumitrescu, and A. Springer, Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications. IEEE, 2021. mla: Hemmelgarn, Florian, et al. “Evaluation of Different Additive Manufacturing Technologies for MIDs in the Context of Smart Sensor Systems for Retrofit Applications.” 14th International Congress Molded Interconnect Devices (MID), IEEE, 2021, doi:10.1109/mid50463.2021.9361628. short: F. Hemmelgarn, P. Ehlert, T. Mager, C. Jurgenhake, R. Dumitrescu, A. Springer, Evaluation of Different Additive Manufacturing Technologies for MIDs in the Context of Smart Sensor Systems for Retrofit Applications, IEEE, 2021. ufg: 'Hemmelgarn, Florian et. al. (2021): Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications.' van: Hemmelgarn F, Ehlert P, Mager T, Jurgenhake C, Dumitrescu R, Springer A. Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications. 14th International Congress Molded Interconnect Devices (MID). IEEE; 2021. conference: end_date: 2021-02-10 location: Amberg name: 14th International Congress Molded Interconnect Devices (MID) start_date: 2021-02-09 date_created: 2022-04-29T15:22:37Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.1109/mid50463.2021.9361628 language: - iso: eng publication: 14th International Congress Molded Interconnect Devices (MID) publication_status: published publisher: IEEE status: public title: Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications type: conference_editor_article user_id: '79260' year: 2021 ... --- _id: '7843' author: - first_name: Patrick full_name: Ehlert, Patrick id: '62091' last_name: Ehlert - first_name: Florian full_name: Hemmelgarn, Florian last_name: Hemmelgarn - first_name: Thomas full_name: Mager, Thomas last_name: Mager - first_name: Christoph full_name: Jürgenhake, Christoph last_name: Jürgenhake - first_name: Horst full_name: Wißbrock, Horst last_name: Wißbrock - first_name: André full_name: Springer, André id: '71733' last_name: Springer citation: ama: Ehlert P, Hemmelgarn F, Mager T, Jürgenhake C, Wißbrock H, Springer A. Entwicklung maßgeschneiderter Sensorsysteme für Retrofit-Anwendungen. Forschungsvereinigung Räumliche Elektronische Baugruppen 3-D MID e.V.; 2021. apa: 'Ehlert, P., Hemmelgarn, F., Mager, T., Jürgenhake, C., Wißbrock, H., & Springer, A. (2021). Entwicklung maßgeschneiderter Sensorsysteme für Retrofit-Anwendungen. Presented at the 2. MID Summit, Nürnberg: Forschungsvereinigung Räumliche Elektronische Baugruppen 3-D MID e.V.' bjps: Ehlert P et al. (2021) Entwicklung maßgeschneiderter Sensorsysteme für Retrofit-Anwendungen. Forschungsvereinigung Räumliche Elektronische Baugruppen 3-D MID e.V. chicago: Ehlert, Patrick, Florian Hemmelgarn, Thomas Mager, Christoph Jürgenhake, Horst Wißbrock, and André Springer. Entwicklung maßgeschneiderter Sensorsysteme für Retrofit-Anwendungen. Forschungsvereinigung Räumliche Elektronische Baugruppen 3-D MID e.V., 2021. chicago-de: Ehlert, Patrick, Florian Hemmelgarn, Thomas Mager, Christoph Jürgenhake, Horst Wißbrock und André Springer. 2021. Entwicklung maßgeschneiderter Sensorsysteme für Retrofit-Anwendungen. Forschungsvereinigung Räumliche Elektronische Baugruppen 3-D MID e.V. din1505-2-1: 'Ehlert, Patrick ; Hemmelgarn, Florian ; Mager, Thomas ; Jürgenhake, Christoph ; Wißbrock, Horst ; Springer, André: Entwicklung maßgeschneiderter Sensorsysteme für Retrofit-Anwendungen : Forschungsvereinigung Räumliche Elektronische Baugruppen 3-D MID e.V., 2021' havard: P. Ehlert, F. Hemmelgarn, T. Mager, C. Jürgenhake, H. Wißbrock, A. Springer, Entwicklung maßgeschneiderter Sensorsysteme für Retrofit-Anwendungen, Forschungsvereinigung Räumliche Elektronische Baugruppen 3-D MID e.V., 2021. ieee: P. Ehlert, F. Hemmelgarn, T. Mager, C. Jürgenhake, H. Wißbrock, and A. Springer, Entwicklung maßgeschneiderter Sensorsysteme für Retrofit-Anwendungen. Forschungsvereinigung Räumliche Elektronische Baugruppen 3-D MID e.V., 2021. mla: Ehlert, Patrick, et al. Entwicklung maßgeschneiderter Sensorsysteme für Retrofit-Anwendungen. Forschungsvereinigung Räumliche Elektronische Baugruppen 3-D MID e.V., 2021. short: P. Ehlert, F. Hemmelgarn, T. Mager, C. Jürgenhake, H. Wißbrock, A. Springer, Entwicklung maßgeschneiderter Sensorsysteme für Retrofit-Anwendungen, Forschungsvereinigung Räumliche Elektronische Baugruppen 3-D MID e.V., 2021. ufg: 'Ehlert, Patrick et. al. (2021): Entwicklung maßgeschneiderter Sensorsysteme für Retrofit-Anwendungen.' van: Ehlert P, Hemmelgarn F, Mager T, Jürgenhake C, Wißbrock H, Springer A. Entwicklung maßgeschneiderter Sensorsysteme für Retrofit-Anwendungen. Forschungsvereinigung Räumliche Elektronische Baugruppen 3-D MID e.V.; 2021. conference: location: Nürnberg name: 2. MID Summit start_date: 2021-09-30 date_created: 2022-04-29T15:45:43Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 language: - iso: ger publisher: Forschungsvereinigung Räumliche Elektronische Baugruppen 3-D MID e.V. status: public title: Entwicklung maßgeschneiderter Sensorsysteme für Retrofit-Anwendungen type: conference_poster user_id: '79260' year: 2021 ... --- _id: '7911' application_date: 2019-05-20 application_number: 10 2019 113 340 author: - first_name: Martin full_name: Stosch, Martin id: '14633' last_name: Stosch - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: Matthias full_name: Meier, Matthias id: '14025' last_name: Meier - first_name: Constanze full_name: Kiwitt, Constanze id: '48987' last_name: Kiwitt - first_name: Sebastian full_name: Plate, Sebastian id: '69110' last_name: Plate - first_name: Patrick full_name: Ehlert, Patrick id: '62091' last_name: Ehlert citation: ama: Stosch M, Springer A, Villmer FJ, et al. 3D-Druck auf Holz. (DE102019113340A1). Published online 2020. apa: Stosch, M., Springer, A., Villmer, F.-J., Meier, M., Kiwitt, C., Plate, S., & Ehlert, P. (2020). 3D-Druck auf Holz. (DE102019113340A1). bjps: Stosch M et al. (2020) 3D-Druck Auf Holz. (DE102019113340A1). chicago: Stosch, Martin, André Springer, Franz-Josef Villmer, Matthias Meier, Constanze Kiwitt, Sebastian Plate, and Patrick Ehlert. “3D-Druck Auf Holz. (DE102019113340A1),” 2020. chicago-de: Stosch, Martin, André Springer, Franz-Josef Villmer, Matthias Meier, Constanze Kiwitt, Sebastian Plate und Patrick Ehlert. 2020. 3D-Druck auf Holz. (DE102019113340A1). din1505-2-1: 'Stosch, Martin ; Springer, André ; Villmer, Franz-Josef ; Meier, Matthias ; Kiwitt, Constanze ; Plate, Sebastian ; Ehlert, Patrick: 3D-Druck auf Holz. (DE102019113340A1) (2020)' havard: M. Stosch, A. Springer, F.-J. Villmer, M. Meier, C. Kiwitt, S. Plate, P. Ehlert, 3D-Druck auf Holz. (DE102019113340A1), (2020). ieee: M. Stosch et al., “3D-Druck auf Holz. (DE102019113340A1).” 2020. mla: Stosch, Martin, et al. 3D-Druck Auf Holz. (DE102019113340A1). 2020. short: M. Stosch, A. Springer, F.-J. Villmer, M. Meier, C. Kiwitt, S. Plate, P. Ehlert, (2020). ufg: 'Stosch, Martin u. a.: 3D-Druck auf Holz. (DE102019113340A1), o. O. 2020.' van: Stosch M, Springer A, Villmer FJ, Meier M, Kiwitt C, Plate S, et al. 3D-Druck auf Holz. (DE102019113340A1). 2020. date_created: 2022-05-03T11:51:40Z date_updated: 2024-01-18T13:19:32Z department: - _id: DEP7037 ipc: B29C 64/118 ipn: DE 10 2019 113 340 A1 main_file_link: - open_access: '1' url: https://depatisnet.dpma.de/DepatisNet/depatisnet?action=pdf&docid=DE102019113340A1&xxxfull=1 oa: '1' page: '19' publication_date: 2020-11-26 status: public title: 3D-Druck auf Holz. (DE102019113340A1) type: patent user_id: '14633' year: '2020' ... --- _id: '7845' author: - first_name: André full_name: Springer, André id: '71733' last_name: Springer citation: ama: Springer A. Retrofit Durch 3D-Druck. Technische Hochschule Ostwestfalen-Lippe; 2019. apa: 'Springer, A. (2019). Retrofit durch 3D-Druck. Presented at the 24. Fachtagung Rapid Prototyping, Lemgo: Technische Hochschule Ostwestfalen-Lippe.' bjps: Springer A (2019) Retrofit Durch 3D-Druck. Technische Hochschule Ostwestfalen-Lippe. chicago: Springer, André. Retrofit Durch 3D-Druck. Technische Hochschule Ostwestfalen-Lippe, 2019. chicago-de: Springer, André. 2019. Retrofit durch 3D-Druck. Technische Hochschule Ostwestfalen-Lippe. din1505-2-1: 'Springer, André: Retrofit durch 3D-Druck : Technische Hochschule Ostwestfalen-Lippe, 2019' havard: A. Springer, Retrofit durch 3D-Druck, Technische Hochschule Ostwestfalen-Lippe, 2019. ieee: A. Springer, Retrofit durch 3D-Druck. Technische Hochschule Ostwestfalen-Lippe, 2019. mla: Springer, André. Retrofit Durch 3D-Druck. Technische Hochschule Ostwestfalen-Lippe, 2019. short: A. Springer, Retrofit Durch 3D-Druck, Technische Hochschule Ostwestfalen-Lippe, 2019. ufg: 'Springer, André (2019): Retrofit durch 3D-Druck.' van: Springer A. Retrofit durch 3D-Druck. Technische Hochschule Ostwestfalen-Lippe; 2019. conference: location: Lemgo name: 24. Fachtagung Rapid Prototyping start_date: 2019-11-08 date_created: 2022-04-29T15:52:54Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 language: - iso: eng publisher: Technische Hochschule Ostwestfalen-Lippe status: public title: Retrofit durch 3D-Druck type: conference_slides user_id: '79260' year: 2019 ... --- _id: '7847' article_number: '032404' author: - first_name: Oliver full_name: Seffer, Oliver last_name: Seffer - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle citation: ama: Seffer O, Springer A, Kaierle S. Investigations on remote laser beam welding of dissimilar joints of austenitic chromium-nickel steel (X5CrNi18-10) and aluminum alloy (AA6082-T6) for battery housings. Journal of Laser Applications. 2018;30(3). doi:10.2351/1.5040638 apa: Seffer, O., Springer, A., & Kaierle, S. (2018). Investigations on remote laser beam welding of dissimilar joints of austenitic chromium-nickel steel (X5CrNi18-10) and aluminum alloy (AA6082-T6) for battery housings. Journal of Laser Applications, 30(3). https://doi.org/10.2351/1.5040638 bjps: Seffer O, Springer A and Kaierle S (2018) Investigations on Remote Laser Beam Welding of Dissimilar Joints of Austenitic Chromium-Nickel Steel (X5CrNi18-10) and Aluminum Alloy (AA6082-T6) for Battery Housings. Journal of Laser Applications 30. chicago: Seffer, Oliver, André Springer, and Stefan Kaierle. “Investigations on Remote Laser Beam Welding of Dissimilar Joints of Austenitic Chromium-Nickel Steel (X5CrNi18-10) and Aluminum Alloy (AA6082-T6) for Battery Housings.” Journal of Laser Applications 30, no. 3 (2018). https://doi.org/10.2351/1.5040638. chicago-de: Seffer, Oliver, André Springer und Stefan Kaierle. 2018. Investigations on remote laser beam welding of dissimilar joints of austenitic chromium-nickel steel (X5CrNi18-10) and aluminum alloy (AA6082-T6) for battery housings. Journal of Laser Applications 30, Nr. 3. doi:10.2351/1.5040638, . din1505-2-1: 'Seffer, Oliver ; Springer, André ; Kaierle, Stefan: Investigations on remote laser beam welding of dissimilar joints of austenitic chromium-nickel steel (X5CrNi18-10) and aluminum alloy (AA6082-T6) for battery housings. In: Journal of Laser Applications Bd. 30, Laser Institute of America (LIA) (2018), Nr. 3' havard: O. Seffer, A. Springer, S. Kaierle, Investigations on remote laser beam welding of dissimilar joints of austenitic chromium-nickel steel (X5CrNi18-10) and aluminum alloy (AA6082-T6) for battery housings, Journal of Laser Applications. 30 (2018). ieee: O. Seffer, A. Springer, and S. Kaierle, “Investigations on remote laser beam welding of dissimilar joints of austenitic chromium-nickel steel (X5CrNi18-10) and aluminum alloy (AA6082-T6) for battery housings,” Journal of Laser Applications, vol. 30, no. 3, 2018. mla: Seffer, Oliver, et al. “Investigations on Remote Laser Beam Welding of Dissimilar Joints of Austenitic Chromium-Nickel Steel (X5CrNi18-10) and Aluminum Alloy (AA6082-T6) for Battery Housings.” Journal of Laser Applications, vol. 30, no. 3, 032404, Laser Institute of America (LIA), 2018, doi:10.2351/1.5040638. short: O. Seffer, A. Springer, S. Kaierle, Journal of Laser Applications 30 (2018). ufg: 'Seffer, Oliver et. al. (2018): Investigations on remote laser beam welding of dissimilar joints of austenitic chromium-nickel steel (X5CrNi18-10) and aluminum alloy (AA6082-T6) for battery housings, in: Journal of Laser Applications 30 (3).' van: Seffer O, Springer A, Kaierle S. Investigations on remote laser beam welding of dissimilar joints of austenitic chromium-nickel steel (X5CrNi18-10) and aluminum alloy (AA6082-T6) for battery housings. Journal of Laser Applications. 2018;30(3). date_created: 2022-04-29T16:07:44Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.2351/1.5040638 extern: '1' intvolume: ' 30' issue: '3' language: - iso: eng publication: Journal of Laser Applications publication_identifier: issn: - 1042-346X - 1938-1387 publication_status: published publisher: Laser Institute of America (LIA) quality_controlled: '1' status: public title: Investigations on remote laser beam welding of dissimilar joints of austenitic chromium-nickel steel (X5CrNi18-10) and aluminum alloy (AA6082-T6) for battery housings type: industry_journal_article user_id: '79260' volume: 30 year: 2018 ... --- _id: '7848' article_number: '032417' author: - first_name: Sarah full_name: Nothdurft, Sarah last_name: Nothdurft - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle - first_name: Hendrik full_name: Ohrdes, Hendrik last_name: Ohrdes - first_name: Jens full_name: Twiefel, Jens last_name: Twiefel - first_name: Jörg full_name: Wallaschek, Jörg last_name: Wallaschek - first_name: Maximilian full_name: Mildebrath, Maximilian last_name: Mildebrath - first_name: Hans Jürgen full_name: Maier, Hans Jürgen last_name: Maier - first_name: Thomas full_name: Hassel, Thomas last_name: Hassel - first_name: Ludger full_name: Overmeyer, Ludger last_name: Overmeyer citation: ama: Nothdurft S, Springer A, Kaierle S, et al. Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects of beam position and ultrasound excitation on the microstructure. Journal of Laser Applications. 2018;30(3). doi:10.2351/1.5040607 apa: Nothdurft, S., Springer, A., Kaierle, S., Ohrdes, H., Twiefel, J., Wallaschek, J., … Overmeyer, L. (2018). Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects of beam position and ultrasound excitation on the microstructure. Journal of Laser Applications, 30(3). https://doi.org/10.2351/1.5040607 bjps: Nothdurft S et al. (2018) Laser Welding of Dissimilar Low-Alloyed Steel-Steel Butt Joints and the Effects of Beam Position and Ultrasound Excitation on the Microstructure. Journal of Laser Applications 30. chicago: Nothdurft, Sarah, André Springer, Stefan Kaierle, Hendrik Ohrdes, Jens Twiefel, Jörg Wallaschek, Maximilian Mildebrath, Hans Jürgen Maier, Thomas Hassel, and Ludger Overmeyer. “Laser Welding of Dissimilar Low-Alloyed Steel-Steel Butt Joints and the Effects of Beam Position and Ultrasound Excitation on the Microstructure.” Journal of Laser Applications 30, no. 3 (2018). https://doi.org/10.2351/1.5040607. chicago-de: Nothdurft, Sarah, André Springer, Stefan Kaierle, Hendrik Ohrdes, Jens Twiefel, Jörg Wallaschek, Maximilian Mildebrath, Hans Jürgen Maier, Thomas Hassel und Ludger Overmeyer. 2018. Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects of beam position and ultrasound excitation on the microstructure. Journal of Laser Applications 30, Nr. 3. doi:10.2351/1.5040607, . din1505-2-1: 'Nothdurft, Sarah ; Springer, André ; Kaierle, Stefan ; Ohrdes, Hendrik ; Twiefel, Jens ; Wallaschek, Jörg ; Mildebrath, Maximilian ; Maier, Hans Jürgen ; u. a.: Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects of beam position and ultrasound excitation on the microstructure. In: Journal of Laser Applications Bd. 30, Laser Institute of America (LIA) (2018), Nr. 3' havard: S. Nothdurft, A. Springer, S. Kaierle, H. Ohrdes, J. Twiefel, J. Wallaschek, M. Mildebrath, H.J. Maier, T. Hassel, L. Overmeyer, Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects of beam position and ultrasound excitation on the microstructure, Journal of Laser Applications. 30 (2018). ieee: S. Nothdurft et al., “Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects of beam position and ultrasound excitation on the microstructure,” Journal of Laser Applications, vol. 30, no. 3, 2018. mla: Nothdurft, Sarah, et al. “Laser Welding of Dissimilar Low-Alloyed Steel-Steel Butt Joints and the Effects of Beam Position and Ultrasound Excitation on the Microstructure.” Journal of Laser Applications, vol. 30, no. 3, 032417, Laser Institute of America (LIA), 2018, doi:10.2351/1.5040607. short: S. Nothdurft, A. Springer, S. Kaierle, H. Ohrdes, J. Twiefel, J. Wallaschek, M. Mildebrath, H.J. Maier, T. Hassel, L. Overmeyer, Journal of Laser Applications 30 (2018). ufg: 'Nothdurft, Sarah et. al. (2018): Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects of beam position and ultrasound excitation on the microstructure, in: Journal of Laser Applications 30 (3).' van: Nothdurft S, Springer A, Kaierle S, Ohrdes H, Twiefel J, Wallaschek J, et al. Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects of beam position and ultrasound excitation on the microstructure. Journal of Laser Applications. 2018;30(3). date_created: 2022-04-29T16:10:11Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.2351/1.5040607 extern: '1' intvolume: ' 30' issue: '3' language: - iso: eng publication: Journal of Laser Applications publication_identifier: issn: - 1042-346X - 1938-1387 publication_status: published publisher: Laser Institute of America (LIA) quality_controlled: '1' status: public title: Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects of beam position and ultrasound excitation on the microstructure type: industry_journal_article user_id: '79260' volume: 30 year: 2018 ... --- _id: '7849' article_number: '032422' author: - first_name: Rabi full_name: Lahdo, Rabi last_name: Lahdo - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Oliver full_name: Meier, Oliver last_name: Meier - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle - first_name: Ludger full_name: Overmeyer, Ludger last_name: Overmeyer citation: ama: Lahdo R, Springer A, Meier O, Kaierle S, Overmeyer L. Investigations on laser welding of dissimilar joints of steel and aluminum using a high-power diode laser. Journal of Laser Applications. 2018. doi:10.2351/1.5040643 apa: Lahdo, R., Springer, A., Meier, O., Kaierle, S., & Overmeyer, L. (2018). Investigations on laser welding of dissimilar joints of steel and aluminum using a high-power diode laser. Journal of Laser Applications. https://doi.org/10.2351/1.5040643 bjps: Lahdo R et al. (2018) Investigations on Laser Welding of Dissimilar Joints of Steel and Aluminum Using a High-Power Diode Laser. Journal of Laser Applications. chicago: Lahdo, Rabi, André Springer, Oliver Meier, Stefan Kaierle, and Ludger Overmeyer. “Investigations on Laser Welding of Dissimilar Joints of Steel and Aluminum Using a High-Power Diode Laser.” Journal of Laser Applications, 2018. https://doi.org/10.2351/1.5040643. chicago-de: Lahdo, Rabi, André Springer, Oliver Meier, Stefan Kaierle und Ludger Overmeyer. 2018. Investigations on laser welding of dissimilar joints of steel and aluminum using a high-power diode laser. Journal of Laser Applications. doi:10.2351/1.5040643, . din1505-2-1: 'Lahdo, Rabi ; Springer, André ; Meier, Oliver ; Kaierle, Stefan ; Overmeyer, Ludger: Investigations on laser welding of dissimilar joints of steel and aluminum using a high-power diode laser. In: Journal of Laser Applications, Laser Institute of America (LIA) (2018)' havard: R. Lahdo, A. Springer, O. Meier, S. Kaierle, L. Overmeyer, Investigations on laser welding of dissimilar joints of steel and aluminum using a high-power diode laser, Journal of Laser Applications. (2018). ieee: R. Lahdo, A. Springer, O. Meier, S. Kaierle, and L. Overmeyer, “Investigations on laser welding of dissimilar joints of steel and aluminum using a high-power diode laser,” Journal of Laser Applications, 2018. mla: Lahdo, Rabi, et al. “Investigations on Laser Welding of Dissimilar Joints of Steel and Aluminum Using a High-Power Diode Laser.” Journal of Laser Applications, 032422, Laser Institute of America (LIA), 2018, doi:10.2351/1.5040643. short: R. Lahdo, A. Springer, O. Meier, S. Kaierle, L. Overmeyer, Journal of Laser Applications (2018). ufg: 'Lahdo, Rabi et. al. (2018): Investigations on laser welding of dissimilar joints of steel and aluminum using a high-power diode laser, in: Journal of Laser Applications.' van: Lahdo R, Springer A, Meier O, Kaierle S, Overmeyer L. Investigations on laser welding of dissimilar joints of steel and aluminum using a high-power diode laser. Journal of Laser Applications. 2018; date_created: 2022-04-29T16:10:53Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.2351/1.5040643 extern: '1' language: - iso: eng publication: Journal of Laser Applications publication_identifier: issn: - 1042-346X - 1938-1387 publication_status: published publisher: Laser Institute of America (LIA) quality_controlled: '1' status: public title: Investigations on laser welding of dissimilar joints of steel and aluminum using a high-power diode laser type: industry_journal_article user_id: '79260' year: 2018 ... --- _id: '549' author: - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Sarah full_name: Nothdurft, Sarah last_name: Nothdurft - first_name: Rabi full_name: Lahdo, Rabi last_name: Lahdo - first_name: Oliver full_name: Seffer, Oliver last_name: Seffer citation: ama: 'Springer A, Nothdurft S, Lahdo R, Seffer O. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2018.' apa: 'Springer, A., Nothdurft, S., Lahdo, R., & Seffer, O. (2018). Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe.' bjps: 'Springer A et al. (2018) Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische Hochschule Ostwestfalen-Lippe.' chicago: 'Springer, André, Sarah Nothdurft, Rabi Lahdo, and Oliver Seffer. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2018.' chicago-de: 'Springer, André, Sarah Nothdurft, Rabi Lahdo und Oliver Seffer. 2018. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Springer, André ; Nothdurft, Sarah ; Lahdo, Rabi ; Seffer, Oliver: Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo : Technische Hochschule Ostwestfalen-Lippe, 2018' havard: A. Springer, S. Nothdurft, R. Lahdo, O. Seffer, Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ieee: 'A. Springer, S. Nothdurft, R. Lahdo, and O. Seffer, Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2018.' mla: Springer, André, et al. “Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow.” 8th International Conference on Production Engineering and Management, Technische Hochschule Ostwestfalen-Lippe, 2018. short: A. Springer, S. Nothdurft, R. Lahdo, O. Seffer, Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ufg: 'Springer, André et. al. (2018): Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow, Lemgo.' van: 'Springer A, Nothdurft S, Lahdo R, Seffer O. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2018.' conference: end_date: 2018-10-05 location: Lemgo name: 8th International Conference start_date: 2018-10-04 date_created: 2019-02-13T13:42:56Z date_updated: 2023-03-15T13:49:59Z department: - _id: DEP1306 - _id: DEP7037 keyword: - Dissimilar metal joints - Laser processes - Multi-material components language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf oa: '1' place: Lemgo publication: 8th International Conference on Production Engineering and Management publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published publisher: Technische Hochschule Ostwestfalen-Lippe related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf status: public title: Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow type: conference_editor_article user_id: '79260' year: 2018 ... --- _id: '7850' author: - first_name: Manuel full_name: Krämer, Manuel last_name: Krämer - first_name: Christian W. full_name: Müller, Christian W. last_name: Müller - first_name: Maike full_name: Hermann, Maike last_name: Hermann - first_name: Sebastian full_name: Decker, Sebastian last_name: Decker - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Ludger full_name: Overmeyer, Ludger last_name: Overmeyer - first_name: Christof full_name: Hurschler, Christof last_name: Hurschler - first_name: Ronny full_name: Pfeifer, Ronny last_name: Pfeifer citation: ama: Krämer M, Müller CW, Hermann M, et al. Design considerations for a novel shape-memory-plate osteosynthesis allowing for non-invasive alteration of bending stiffness. Journal of the Mechanical Behavior of Biomedical Materials. 2017;75(November):558-566. doi:10.1016/j.jmbbm.2017.08.024 apa: Krämer, M., Müller, C. W., Hermann, M., Decker, S., Springer, A., Overmeyer, L., … Pfeifer, R. (2017). Design considerations for a novel shape-memory-plate osteosynthesis allowing for non-invasive alteration of bending stiffness. Journal of the Mechanical Behavior of Biomedical Materials, 75(November), 558–566. https://doi.org/10.1016/j.jmbbm.2017.08.024 bjps: Krämer M et al. (2017) Design Considerations for a Novel Shape-Memory-Plate Osteosynthesis Allowing for Non-Invasive Alteration of Bending Stiffness. Journal of the Mechanical Behavior of Biomedical Materials 75, 558–566. chicago: 'Krämer, Manuel, Christian W. Müller, Maike Hermann, Sebastian Decker, André Springer, Ludger Overmeyer, Christof Hurschler, and Ronny Pfeifer. “Design Considerations for a Novel Shape-Memory-Plate Osteosynthesis Allowing for Non-Invasive Alteration of Bending Stiffness.” Journal of the Mechanical Behavior of Biomedical Materials 75, no. November (2017): 558–66. https://doi.org/10.1016/j.jmbbm.2017.08.024.' chicago-de: 'Krämer, Manuel, Christian W. Müller, Maike Hermann, Sebastian Decker, André Springer, Ludger Overmeyer, Christof Hurschler und Ronny Pfeifer. 2017. Design considerations for a novel shape-memory-plate osteosynthesis allowing for non-invasive alteration of bending stiffness. Journal of the Mechanical Behavior of Biomedical Materials 75, Nr. November: 558–566. doi:10.1016/j.jmbbm.2017.08.024, .' din1505-2-1: 'Krämer, Manuel ; Müller, Christian W. ; Hermann, Maike ; Decker, Sebastian ; Springer, André ; Overmeyer, Ludger ; Hurschler, Christof ; Pfeifer, Ronny: Design considerations for a novel shape-memory-plate osteosynthesis allowing for non-invasive alteration of bending stiffness. In: Journal of the Mechanical Behavior of Biomedical Materials Bd. 75, Elsevier (2017), Nr. November, S. 558–566' havard: M. Krämer, C.W. Müller, M. Hermann, S. Decker, A. Springer, L. Overmeyer, C. Hurschler, R. Pfeifer, Design considerations for a novel shape-memory-plate osteosynthesis allowing for non-invasive alteration of bending stiffness, Journal of the Mechanical Behavior of Biomedical Materials. 75 (2017) 558–566. ieee: M. Krämer et al., “Design considerations for a novel shape-memory-plate osteosynthesis allowing for non-invasive alteration of bending stiffness,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 75, no. November, pp. 558–566, 2017. mla: Krämer, Manuel, et al. “Design Considerations for a Novel Shape-Memory-Plate Osteosynthesis Allowing for Non-Invasive Alteration of Bending Stiffness.” Journal of the Mechanical Behavior of Biomedical Materials, vol. 75, no. November, Elsevier, 2017, pp. 558–66, doi:10.1016/j.jmbbm.2017.08.024. short: M. Krämer, C.W. Müller, M. Hermann, S. Decker, A. Springer, L. Overmeyer, C. Hurschler, R. Pfeifer, Journal of the Mechanical Behavior of Biomedical Materials 75 (2017) 558–566. ufg: 'Krämer, Manuel et. al. (2017): Design considerations for a novel shape-memory-plate osteosynthesis allowing for non-invasive alteration of bending stiffness, in: Journal of the Mechanical Behavior of Biomedical Materials 75 (November), S. 558–566.' van: Krämer M, Müller CW, Hermann M, Decker S, Springer A, Overmeyer L, et al. Design considerations for a novel shape-memory-plate osteosynthesis allowing for non-invasive alteration of bending stiffness. Journal of the Mechanical Behavior of Biomedical Materials. 2017;75(November):558–66. date_created: 2022-04-29T16:11:42Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.1016/j.jmbbm.2017.08.024 extern: '1' intvolume: ' 75' issue: November language: - iso: eng page: 558-566 publication: Journal of the Mechanical Behavior of Biomedical Materials publication_identifier: issn: - 1751-6161 publication_status: published publisher: Elsevier quality_controlled: '1' status: public title: Design considerations for a novel shape-memory-plate osteosynthesis allowing for non-invasive alteration of bending stiffness type: scientific_journal_article user_id: '79260' volume: 75 year: 2017 ... --- _id: '7851' abstract: - lang: eng text: Most of today’s technical parts and components are made of monolithic materials. These mono-material components produced in established production processes reach their limits due to their respective material characteristics. Thus, a significant increase in production quality and efficiency can only be achieved by combining different materials in one part. Bulk forming of previously joined semi-finished products to net shape hybrid components that consist of two different materials is a promising method to produce parts with locally optimized characteristics. This new production process chain offers a number of advantages compared to conventional manufacturing technologies. Examples are the production of specific load-adapted forged parts with a high level of material utilization and an impact on the joining zone caused by the following forming process. This paper describes the production process of serially arranged hybrid steel parts, produced by combining a laser welding process with a subsequent cross wedge rolling process. The presented results are only a first approach in order to get first insights in the forming behaviour of laser welded and cross wedge rolled parts. The investigated material combination is C22 (1.0402) and 20MnCr5 (1.7147). This innovative process chain enables the production of hybrid parts. To evaluate the developed process chain, the weld and the joining zone is analysed before and after cross wedge rolling. Main results are that the joining process using laser welding enables a strong bonding between the two materials with a higher hardness in the joining zone than for the individual materials. After the forming process, the bonding of the joining zone is still present, while the hardness decreased but remains higher than of the materials themselves. author: - first_name: Thoms full_name: Blohm, Thoms last_name: Blohm - first_name: Sarah full_name: Nothdurft, Sarah last_name: Nothdurft - first_name: Maximilian full_name: Mildebrath, Maximilian last_name: Mildebrath - first_name: Hendrik full_name: Ohrdes, Hendrik last_name: Ohrdes - first_name: Johannes full_name: Richter, Johannes last_name: Richter - first_name: Malte full_name: Stonis, Malte last_name: Stonis - first_name: Jan full_name: Langner, Jan last_name: Langner - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle - first_name: Thomas full_name: Hassel, Thomas last_name: Hassel - first_name: Jörg full_name: Wallaschek, Jörg last_name: Wallaschek - first_name: Ludger full_name: Overmeyer, Ludger last_name: Overmeyer - first_name: Bernd-Arno full_name: Behrens, Bernd-Arno last_name: Behrens citation: ama: 'Blohm T, Nothdurft S, Mildebrath M, et al. Investigation of the joining zone of laser welded and cross wedge rolled hybrid parts.   International journal of material forming : official Journal of the European Scientific Association for material FORMing (ESAFORM) . 2017;(11):829-837. doi:10.1007/s12289-017-1393-0' apa: 'Blohm, T., Nothdurft, S., Mildebrath, M., Ohrdes, H., Richter, J., Stonis, M., Langner, J., Springer, A., Kaierle, S., Hassel, T., Wallaschek, J., Overmeyer, L., & Behrens, B.-A. (2017). Investigation of the joining zone of laser welded and cross wedge rolled hybrid parts.   International Journal of Material Forming : Official Journal of the European Scientific Association for Material FORMing (ESAFORM) , 11, 829–837. https://doi.org/10.1007/s12289-017-1393-0' bjps: 'Blohm T et al. (2017) Investigation of the Joining Zone of Laser Welded and Cross Wedge Rolled Hybrid Parts.   International journal of material forming : official Journal of the European Scientific Association for material FORMing (ESAFORM) 829–837.' chicago: 'Blohm, Thoms, Sarah Nothdurft, Maximilian Mildebrath, Hendrik Ohrdes, Johannes Richter, Malte Stonis, Jan Langner, et al. “Investigation of the Joining Zone of Laser Welded and Cross Wedge Rolled Hybrid Parts.”   International Journal of Material Forming : Official Journal of the European Scientific Association for Material FORMing (ESAFORM) , no. 11 (2017): 829–37. https://doi.org/10.1007/s12289-017-1393-0.' chicago-de: 'Blohm, Thoms, Sarah Nothdurft, Maximilian Mildebrath, Hendrik Ohrdes, Johannes Richter, Malte Stonis, Jan Langner, u. a. 2017. Investigation of the joining zone of laser welded and cross wedge rolled hybrid parts.   International journal of material forming : official Journal of the European Scientific Association for material FORMing (ESAFORM) , Nr. 11: 829–837. doi:10.1007/s12289-017-1393-0, .' din1505-2-1: 'Blohm, Thoms ; Nothdurft, Sarah ; Mildebrath, Maximilian ; Ohrdes, Hendrik ; Richter, Johannes ; Stonis, Malte ; Langner, Jan ; Springer, André ; u. a.: Investigation of the joining zone of laser welded and cross wedge rolled hybrid parts. In:   International journal of material forming : official Journal of the European Scientific Association for material FORMing (ESAFORM) . Paris [u.a.] , Springer (2017), Nr. 11, S. 829–837' havard: 'T. Blohm, S. Nothdurft, M. Mildebrath, H. Ohrdes, J. Richter, M. Stonis, J. Langner, A. Springer, S. Kaierle, T. Hassel, J. Wallaschek, L. Overmeyer, B.-A. Behrens, Investigation of the joining zone of laser welded and cross wedge rolled hybrid parts,   International Journal of Material Forming : Official Journal of the European Scientific Association for Material FORMing (ESAFORM) . (2017) 829–837.' ieee: 'T. Blohm et al., “Investigation of the joining zone of laser welded and cross wedge rolled hybrid parts,”   International journal of material forming : official Journal of the European Scientific Association for material FORMing (ESAFORM) , no. 11, pp. 829–837, 2017, doi: 10.1007/s12289-017-1393-0.' mla: 'Blohm, Thoms, et al. “Investigation of the Joining Zone of Laser Welded and Cross Wedge Rolled Hybrid Parts.”   International Journal of Material Forming : Official Journal of the European Scientific Association for Material FORMing (ESAFORM) , no. 11, 2017, pp. 829–37, https://doi.org/10.1007/s12289-017-1393-0.' short: 'T. Blohm, S. Nothdurft, M. Mildebrath, H. Ohrdes, J. Richter, M. Stonis, J. Langner, A. Springer, S. Kaierle, T. Hassel, J. Wallaschek, L. Overmeyer, B.-A. Behrens,   International Journal of Material Forming : Official Journal of the European Scientific Association for Material FORMing (ESAFORM) (2017) 829–837.' ufg: 'Blohm, Thoms u. a.: Investigation of the joining zone of laser welded and cross wedge rolled hybrid parts, in:   International journal of material forming : official Journal of the European Scientific Association for material FORMing (ESAFORM) (2017), H. 11,  S. 829–837.' van: 'Blohm T, Nothdurft S, Mildebrath M, Ohrdes H, Richter J, Stonis M, et al. Investigation of the joining zone of laser welded and cross wedge rolled hybrid parts.   International journal of material forming : official Journal of the European Scientific Association for material FORMing (ESAFORM) . 2017;(11):829–37.' date_created: 2022-04-29T16:12:14Z date_updated: 2025-02-24T15:28:40Z department: - _id: DEP7037 doi: 10.1007/s12289-017-1393-0 extern: '1' issue: '11' keyword: - Process chain - Laser welding - Hybrid parts - Dissimilar joints - Cross wedge rolling language: - iso: eng page: 829-837 place: 'Paris [u.a.] ' publication: " \t International journal of material forming : official Journal of the European Scientific Association for material FORMing (ESAFORM) " publication_identifier: eissn: - 1960-6214 issn: - 1960-6206 publication_status: published publisher: Springer quality_controlled: '1' status: public title: Investigation of the joining zone of laser welded and cross wedge rolled hybrid parts type: scientific_journal_article user_id: '83781' year: '2017' ... --- _id: '7852' article_number: '022414' author: - first_name: Oliver full_name: Seffer, Oliver last_name: Seffer - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle citation: ama: Seffer O, Springer A, Kaierle S. Investigations on remote laser beam welding of dissimilar joints of aluminum alloys and steel with varying sheet thicknesses for car body construction. Journal of Laser Applications. 2017;29. doi:10.2351/1.4983241 apa: Seffer, O., Springer, A., & Kaierle, S. (2017). Investigations on remote laser beam welding of dissimilar joints of aluminum alloys and steel with varying sheet thicknesses for car body construction. Journal of Laser Applications, 29. https://doi.org/10.2351/1.4983241 bjps: Seffer O, Springer A and Kaierle S (2017) Investigations on Remote Laser Beam Welding of Dissimilar Joints of Aluminum Alloys and Steel with Varying Sheet Thicknesses for Car Body Construction. Journal of Laser Applications 29. chicago: Seffer, Oliver, André Springer, and Stefan Kaierle. “Investigations on Remote Laser Beam Welding of Dissimilar Joints of Aluminum Alloys and Steel with Varying Sheet Thicknesses for Car Body Construction.” Journal of Laser Applications 29 (2017). https://doi.org/10.2351/1.4983241. chicago-de: Seffer, Oliver, André Springer und Stefan Kaierle. 2017. Investigations on remote laser beam welding of dissimilar joints of aluminum alloys and steel with varying sheet thicknesses for car body construction. Journal of Laser Applications 29. doi:10.2351/1.4983241, . din1505-2-1: 'Seffer, Oliver ; Springer, André ; Kaierle, Stefan: Investigations on remote laser beam welding of dissimilar joints of aluminum alloys and steel with varying sheet thicknesses for car body construction. In: Journal of Laser Applications Bd. 29, Laser Institute of America (LIA) (2017)' havard: O. Seffer, A. Springer, S. Kaierle, Investigations on remote laser beam welding of dissimilar joints of aluminum alloys and steel with varying sheet thicknesses for car body construction, Journal of Laser Applications. 29 (2017). ieee: O. Seffer, A. Springer, and S. Kaierle, “Investigations on remote laser beam welding of dissimilar joints of aluminum alloys and steel with varying sheet thicknesses for car body construction,” Journal of Laser Applications, vol. 29, 2017. mla: Seffer, Oliver, et al. “Investigations on Remote Laser Beam Welding of Dissimilar Joints of Aluminum Alloys and Steel with Varying Sheet Thicknesses for Car Body Construction.” Journal of Laser Applications, vol. 29, 022414, Laser Institute of America (LIA), 2017, doi:10.2351/1.4983241. short: O. Seffer, A. Springer, S. Kaierle, Journal of Laser Applications 29 (2017). ufg: 'Seffer, Oliver et. al. (2017): Investigations on remote laser beam welding of dissimilar joints of aluminum alloys and steel with varying sheet thicknesses for car body construction, in: Journal of Laser Applications 29.' van: Seffer O, Springer A, Kaierle S. Investigations on remote laser beam welding of dissimilar joints of aluminum alloys and steel with varying sheet thicknesses for car body construction. Journal of Laser Applications. 2017;29. date_created: 2022-04-29T16:13:00Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.2351/1.4983241 extern: '1' intvolume: ' 29' language: - iso: eng publication: Journal of Laser Applications publication_identifier: issn: - 1042-346X - 1938-1387 publication_status: published publisher: Laser Institute of America (LIA) quality_controlled: '1' status: public title: Investigations on remote laser beam welding of dissimilar joints of aluminum alloys and steel with varying sheet thicknesses for car body construction type: industry_journal_article user_id: '79260' volume: 29 year: 2017 ... --- _id: '7869' author: - first_name: Sarah full_name: Nothdurft, Sarah last_name: Nothdurft - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle citation: ama: 'Nothdurft S, Springer A, Kaierle S. Influencing the weld pool during laser welding. In: Lawrence JR, ed. Advances in Laser Materials Processing. 2nd ed. Cambridge: Woodhead Publishing Ltd; 2017.' apa: 'Nothdurft, S., Springer, A., & Kaierle, S. (2017). Influencing the weld pool during laser welding. In J. R. Lawrence (Ed.), Advances in Laser Materials Processing (2nd ed.). Cambridge: Woodhead Publishing Ltd.' bjps: 'Nothdurft S, Springer A and Kaierle S (2017) Influencing the Weld Pool during Laser Welding. In Lawrence JR (ed.), Advances in Laser Materials Processing, 2nd ed. Cambridge: Woodhead Publishing Ltd.' chicago: 'Nothdurft, Sarah, André Springer, and Stefan Kaierle. “Influencing the Weld Pool during Laser Welding.” In Advances in Laser Materials Processing, edited by Jonathan R. Lawrence, 2nd ed. Cambridge: Woodhead Publishing Ltd, 2017.' chicago-de: 'Nothdurft, Sarah, André Springer und Stefan Kaierle. 2017. Influencing the weld pool during laser welding. In: Advances in Laser Materials Processing, hg. von Jonathan R. Lawrence. 2nd ed. Cambridge: Woodhead Publishing Ltd.' din1505-2-1: 'Nothdurft, Sarah ; Springer, André ; Kaierle, Stefan: Influencing the weld pool during laser welding. In: Lawrence, J. R. (Hrsg.): Advances in Laser Materials Processing. 2nd ed. Cambridge : Woodhead Publishing Ltd, 2017' havard: 'S. Nothdurft, A. Springer, S. Kaierle, Influencing the weld pool during laser welding, in: J.R. Lawrence (Ed.), Advances in Laser Materials Processing, 2nd ed., Woodhead Publishing Ltd, Cambridge, 2017.' ieee: 'S. Nothdurft, A. Springer, and S. Kaierle, “Influencing the weld pool during laser welding,” in Advances in Laser Materials Processing, 2nd ed., J. R. Lawrence, Ed. Cambridge: Woodhead Publishing Ltd, 2017.' mla: Nothdurft, Sarah, et al. “Influencing the Weld Pool during Laser Welding.” Advances in Laser Materials Processing, edited by Jonathan R. Lawrence, 2nd ed., Woodhead Publishing Ltd, 2017. short: 'S. Nothdurft, A. Springer, S. Kaierle, in: J.R. Lawrence (Ed.), Advances in Laser Materials Processing, 2nd ed., Woodhead Publishing Ltd, Cambridge, 2017.' ufg: 'Nothdurft, Sarah et. al. (2017): Influencing the weld pool during laser welding, in: Jonathan R. Lawrence (Hg.): Advances in Laser Materials Processing, Cambridge, 2nd ed.' van: 'Nothdurft S, Springer A, Kaierle S. Influencing the weld pool during laser welding. In: Lawrence JR, editor. Advances in Laser Materials Processing. 2nd ed. Cambridge: Woodhead Publishing Ltd; 2017.' date_created: 2022-05-02T12:09:34Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 edition: 2nd ed. editor: - first_name: Jonathan R. full_name: Lawrence, Jonathan R. last_name: Lawrence extern: '1' language: - iso: eng place: Cambridge publication: Advances in Laser Materials Processing publication_identifier: eisbn: - '9780081012536' isbn: - 978-0-08-101252-9 publication_status: published publisher: Woodhead Publishing Ltd status: public title: Influencing the weld pool during laser welding type: book_chapter user_id: '79260' year: 2017 ... --- _id: '7871' author: - first_name: Sarah full_name: Nothdurft, Sarah last_name: Nothdurft - first_name: Oliver full_name: Seffer, Oliver last_name: Seffer - first_name: Ronny full_name: Pfeifer, Ronny last_name: Pfeifer - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle citation: ama: Nothdurft S, Seffer O, Pfeifer R, Springer A, Kaierle S. Leichtbau durch laserstrahlgefügte Stahl-Aluminium-Mischverbindungen. Schweißen und Schneiden. 2017;69(9):600-607. apa: Nothdurft, S., Seffer, O., Pfeifer, R., Springer, A., & Kaierle, S. (2017). Leichtbau durch laserstrahlgefügte Stahl-Aluminium-Mischverbindungen. Schweißen Und Schneiden, 69(9), 600–607. bjps: Nothdurft S et al. (2017) Leichtbau Durch Laserstrahlgefügte Stahl-Aluminium-Mischverbindungen. Schweißen und Schneiden 69, 600–607. chicago: 'Nothdurft, Sarah, Oliver Seffer, Ronny Pfeifer, André Springer, and Stefan Kaierle. “Leichtbau Durch Laserstrahlgefügte Stahl-Aluminium-Mischverbindungen.” Schweißen Und Schneiden 69, no. 9 (2017): 600–607.' chicago-de: 'Nothdurft, Sarah, Oliver Seffer, Ronny Pfeifer, André Springer und Stefan Kaierle. 2017. Leichtbau durch laserstrahlgefügte Stahl-Aluminium-Mischverbindungen. Schweißen und Schneiden 69, Nr. 9: 600–607.' din1505-2-1: 'Nothdurft, Sarah ; Seffer, Oliver ; Pfeifer, Ronny ; Springer, André ; Kaierle, Stefan: Leichtbau durch laserstrahlgefügte Stahl-Aluminium-Mischverbindungen. In: Schweißen und Schneiden Bd. 69, DVS Media (2017), Nr. 9, S. 600–607' havard: S. Nothdurft, O. Seffer, R. Pfeifer, A. Springer, S. Kaierle, Leichtbau durch laserstrahlgefügte Stahl-Aluminium-Mischverbindungen, Schweißen Und Schneiden. 69 (2017) 600–607. ieee: S. Nothdurft, O. Seffer, R. Pfeifer, A. Springer, and S. Kaierle, “Leichtbau durch laserstrahlgefügte Stahl-Aluminium-Mischverbindungen,” Schweißen und Schneiden, vol. 69, no. 9, pp. 600–607, 2017. mla: Nothdurft, Sarah, et al. “Leichtbau Durch Laserstrahlgefügte Stahl-Aluminium-Mischverbindungen.” Schweißen Und Schneiden, vol. 69, no. 9, DVS Media, 2017, pp. 600–07. short: S. Nothdurft, O. Seffer, R. Pfeifer, A. Springer, S. Kaierle, Schweißen Und Schneiden 69 (2017) 600–607. ufg: 'Nothdurft, Sarah et. al. (2017): Leichtbau durch laserstrahlgefügte Stahl-Aluminium-Mischverbindungen, in: Schweißen und Schneiden 69 (9), S. 600–607.' van: Nothdurft S, Seffer O, Pfeifer R, Springer A, Kaierle S. Leichtbau durch laserstrahlgefügte Stahl-Aluminium-Mischverbindungen. Schweißen und Schneiden. 2017;69(9):600–7. date_created: 2022-05-02T12:18:43Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 extern: '1' intvolume: ' 69' issue: '9' language: - iso: eng page: 600 - 607 publication: Schweißen und Schneiden publication_identifier: issn: - '0036-7184 ' publication_status: published publisher: DVS Media status: public title: Leichtbau durch laserstrahlgefügte Stahl-Aluminium-Mischverbindungen type: industry_journal_article user_id: '79260' volume: 69 year: 2017 ... --- _id: '7884' author: - first_name: B.-A. full_name: Behrens, B.-A. last_name: Behrens - first_name: J. full_name: Ross, J. last_name: Ross - first_name: J. full_name: Langner, J. last_name: Langner - first_name: S. full_name: Kaierle, S. last_name: Kaierle - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: S. full_name: Nothdurft, S. last_name: Nothdurft citation: ama: Behrens B-A, Ross J, Langner J, Kaierle S, Springer A, Nothdurft S. Innenhochdruckumformte laserstrahlgelötete Tailored Hybrid Tubes aus Stahl-Aluminium-Mischverbindungen für den automobilen Leichtbau. 37. EFB-Kolloquium Blechverarbeitung; 2017:125–132. apa: 'Behrens, B.-A., Ross, J., Langner, J., Kaierle, S., Springer, A., & Nothdurft, S. (2017). Innenhochdruckumformte laserstrahlgelötete Tailored Hybrid Tubes aus Stahl-Aluminium-Mischverbindungen für den automobilen Leichtbau. Tagungsband TB-044 (pp. 125–132). Fellbach: 37. EFB-Kolloquium Blechverarbeitung.' bjps: Behrens B-A et al. (2017) Innenhochdruckumformte laserstrahlgelötete Tailored Hybrid Tubes aus Stahl-Aluminium-Mischverbindungen für den automobilen Leichtbau. 37. EFB-Kolloquium Blechverarbeitung. chicago: Behrens, B.-A., J. Ross, J. Langner, S. Kaierle, André Springer, and S. Nothdurft. Innenhochdruckumformte laserstrahlgelötete Tailored Hybrid Tubes aus Stahl-Aluminium-Mischverbindungen für den automobilen Leichtbau. Tagungsband TB-044. 37. EFB-Kolloquium Blechverarbeitung, 2017. chicago-de: Behrens, B.-A., J. Ross, J. Langner, S. Kaierle, André Springer und S. Nothdurft. 2017. Innenhochdruckumformte laserstrahlgelötete Tailored Hybrid Tubes aus Stahl-Aluminium-Mischverbindungen für den automobilen Leichtbau. Tagungsband TB-044. 37. EFB-Kolloquium Blechverarbeitung. din1505-2-1: 'Behrens, B.-A. ; Ross, J. ; Langner, J. ; Kaierle, S. ; Springer, André ; Nothdurft, S.: Innenhochdruckumformte laserstrahlgelötete Tailored Hybrid Tubes aus Stahl-Aluminium-Mischverbindungen für den automobilen Leichtbau : 37. EFB-Kolloquium Blechverarbeitung, 2017' havard: B.-A. Behrens, J. Ross, J. Langner, S. Kaierle, A. Springer, S. Nothdurft, Innenhochdruckumformte laserstrahlgelötete Tailored Hybrid Tubes aus Stahl-Aluminium-Mischverbindungen für den automobilen Leichtbau, 37. EFB-Kolloquium Blechverarbeitung, 2017. ieee: B.-A. Behrens, J. Ross, J. Langner, S. Kaierle, A. Springer, and S. Nothdurft, Innenhochdruckumformte laserstrahlgelötete Tailored Hybrid Tubes aus Stahl-Aluminium-Mischverbindungen für den automobilen Leichtbau. 37. EFB-Kolloquium Blechverarbeitung, 2017, pp. 125–132. mla: Behrens, B. A., et al. “Innenhochdruckumformte laserstrahlgelötete Tailored Hybrid Tubes aus Stahl-Aluminium-Mischverbindungen für den automobilen Leichtbau.” Tagungsband TB-044, 37. EFB-Kolloquium Blechverarbeitung, 2017, pp. 125–132. short: B.-A. Behrens, J. Ross, J. Langner, S. Kaierle, A. Springer, S. Nothdurft, Innenhochdruckumformte laserstrahlgelötete Tailored Hybrid Tubes aus Stahl-Aluminium-Mischverbindungen für den automobilen Leichtbau, 37. EFB-Kolloquium Blechverarbeitung, 2017. ufg: 'Behrens, B.-A. et. al. (2017): Innenhochdruckumformte laserstrahlgelötete Tailored Hybrid Tubes aus Stahl-Aluminium-Mischverbindungen für den automobilen Leichtbau.' van: Behrens B-A, Ross J, Langner J, Kaierle S, Springer A, Nothdurft S. Innenhochdruckumformte laserstrahlgelötete Tailored Hybrid Tubes aus Stahl-Aluminium-Mischverbindungen für den automobilen Leichtbau. Tagungsband TB-044. 37. EFB-Kolloquium Blechverarbeitung; 2017. conference: end_date: 2017-03-29 location: Fellbach name: 37. EFB-Kolloquium Blechverarbeitung start_date: 2017-03-28 date_created: 2022-05-02T14:37:55Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 extern: '1' language: - iso: ger page: 125–132 publication: Tagungsband TB-044 publication_identifier: isbn: - 978-3-86776-503-9 publication_status: published publisher: 37. EFB-Kolloquium Blechverarbeitung status: public title: Innenhochdruckumformte laserstrahlgelötete Tailored Hybrid Tubes aus Stahl-Aluminium-Mischverbindungen für den automobilen Leichtbau type: conference_editor_article user_id: '79260' year: 2017 ... --- _id: '7885' author: - first_name: S. full_name: Nothdurft, S. last_name: Nothdurft - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: S. full_name: Kaierle, S. last_name: Kaierle - first_name: L. full_name: Overmeyer, L. last_name: Overmeyer - first_name: M. full_name: Mildebrath, M. last_name: Mildebrath - first_name: H. J. full_name: Maier, H. J. last_name: Maier - first_name: T. full_name: Hassel, T. last_name: Hassel - first_name: H. full_name: Ohrdes, H. last_name: Ohrdes - first_name: J. full_name: Wallaschek, J. last_name: Wallaschek citation: ama: 'Nothdurft S, Springer A, Kaierle S, et al. Beeinflussung Des Schmelzbades von Mischverbindungen Im Laserstrahlschweißprozess Durch Ultraschall. Aachen: Shaker Verlag; 2017:259–268.' apa: 'Nothdurft, S., Springer, A., Kaierle, S., Overmeyer, L., Mildebrath, M., Maier, H. J., … Wallaschek, J. (2017). Beeinflussung des Schmelzbades von Mischverbindungen im Laserstrahlschweißprozess durch Ultraschall. Fortschrittsberichte der Materialforschung und Werkstofftechnik Band 4 (pp. 259–268). Aachen: Shaker Verlag.' bjps: 'Nothdurft S et al. (2017) Beeinflussung Des Schmelzbades von Mischverbindungen Im Laserstrahlschweißprozess Durch Ultraschall. Aachen: Shaker Verlag.' chicago: 'Nothdurft, S., André Springer, S. Kaierle, L. Overmeyer, M. Mildebrath, H. J. Maier, T. Hassel, H. Ohrdes, and J. Wallaschek. Beeinflussung Des Schmelzbades von Mischverbindungen Im Laserstrahlschweißprozess Durch Ultraschall. Fortschrittsberichte Der Materialforschung Und Werkstofftechnik Band 4. Aachen: Shaker Verlag, 2017.' chicago-de: 'Nothdurft, S., André Springer, S. Kaierle, L. Overmeyer, M. Mildebrath, H. J. Maier, T. Hassel, H. Ohrdes und J. Wallaschek. 2017. Beeinflussung des Schmelzbades von Mischverbindungen im Laserstrahlschweißprozess durch Ultraschall. Fortschrittsberichte der Materialforschung und Werkstofftechnik Band 4. Aachen: Shaker Verlag.' din1505-2-1: 'Nothdurft, S. ; Springer, André ; Kaierle, S. ; Overmeyer, L. ; Mildebrath, M. ; Maier, H. J. ; Hassel, T. ; Ohrdes, H. ; u. a.: Beeinflussung des Schmelzbades von Mischverbindungen im Laserstrahlschweißprozess durch Ultraschall. Aachen : Shaker Verlag, 2017' havard: S. Nothdurft, A. Springer, S. Kaierle, L. Overmeyer, M. Mildebrath, H.J. Maier, T. Hassel, H. Ohrdes, J. Wallaschek, Beeinflussung des Schmelzbades von Mischverbindungen im Laserstrahlschweißprozess durch Ultraschall, Shaker Verlag, Aachen, 2017. ieee: 'S. Nothdurft et al., Beeinflussung des Schmelzbades von Mischverbindungen im Laserstrahlschweißprozess durch Ultraschall. Aachen: Shaker Verlag, 2017, pp. 259–268.' mla: Nothdurft, S., et al. “Beeinflussung Des Schmelzbades von Mischverbindungen Im Laserstrahlschweißprozess Durch Ultraschall.” Fortschrittsberichte Der Materialforschung Und Werkstofftechnik Band 4, Shaker Verlag, 2017, pp. 259–268. short: S. Nothdurft, A. Springer, S. Kaierle, L. Overmeyer, M. Mildebrath, H.J. Maier, T. Hassel, H. Ohrdes, J. Wallaschek, Beeinflussung Des Schmelzbades von Mischverbindungen Im Laserstrahlschweißprozess Durch Ultraschall, Shaker Verlag, Aachen, 2017. ufg: 'Nothdurft, S. et. al. (2017): Beeinflussung des Schmelzbades von Mischverbindungen im Laserstrahlschweißprozess durch Ultraschall, Aachen.' van: 'Nothdurft S, Springer A, Kaierle S, Overmeyer L, Mildebrath M, Maier HJ, et al. Beeinflussung des Schmelzbades von Mischverbindungen im Laserstrahlschweißprozess durch Ultraschall. Fortschrittsberichte der Materialforschung und Werkstofftechnik Band 4. Aachen: Shaker Verlag; 2017.' conference: end_date: 2017-02-24 location: Clausthal-Zellerfeld name: 2. Niedersächsisches Symposium Materialtechnik start_date: 2017-02-23 date_created: 2022-05-02T14:41:48Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 extern: '1' language: - iso: eng page: 259–268 place: Aachen publication: Fortschrittsberichte der Materialforschung und Werkstofftechnik Band 4 publication_identifier: isbn: - 978-3-8440-5069-1 publication_status: published publisher: Shaker Verlag status: public title: Beeinflussung des Schmelzbades von Mischverbindungen im Laserstrahlschweißprozess durch Ultraschall type: conference_editor_article user_id: '79260' year: 2017 ... --- _id: '7887' author: - first_name: Oliver full_name: Seffer, Oliver last_name: Seffer - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle citation: ama: 'Seffer O, Springer A, Kaierle S. Untersuchungen zum Remote-Laserstrahlschweißen artungleicher Verbindungen an unterschiedlichen Stahl- und Aluminiumwerkstoffen aus dem Karosseriebau. Aachen: Shaker Verlag; 2017:269–284.' apa: 'Seffer, O., Springer, A., & Kaierle, S. (2017). Untersuchungen zum Remote-Laserstrahlschweißen artungleicher Verbindungen an unterschiedlichen Stahl- und Aluminiumwerkstoffen aus dem Karosseriebau. Fortschrittsberichte der Materialforschung und Werkstofftechnik Band 4 (pp. 269–284). Aachen: Shaker Verlag.' bjps: 'Seffer O, Springer A and Kaierle S (2017) Untersuchungen zum Remote-Laserstrahlschweißen artungleicher Verbindungen an unterschiedlichen Stahl- und Aluminiumwerkstoffen aus dem Karosseriebau. Aachen: Shaker Verlag.' chicago: 'Seffer, Oliver, André Springer, and Stefan Kaierle. Untersuchungen zum Remote-Laserstrahlschweißen artungleicher Verbindungen an unterschiedlichen Stahl- und Aluminiumwerkstoffen aus dem Karosseriebau. Fortschrittsberichte der Materialforschung und Werkstofftechnik Band 4. Aachen: Shaker Verlag, 2017.' chicago-de: 'Seffer, Oliver, André Springer und Stefan Kaierle. 2017. Untersuchungen zum Remote-Laserstrahlschweißen artungleicher Verbindungen an unterschiedlichen Stahl- und Aluminiumwerkstoffen aus dem Karosseriebau. Fortschrittsberichte der Materialforschung und Werkstofftechnik Band 4. Aachen: Shaker Verlag.' din1505-2-1: 'Seffer, Oliver ; Springer, André ; Kaierle, Stefan: Untersuchungen zum Remote-Laserstrahlschweißen artungleicher Verbindungen an unterschiedlichen Stahl- und Aluminiumwerkstoffen aus dem Karosseriebau. Aachen : Shaker Verlag, 2017' havard: O. Seffer, A. Springer, S. Kaierle, Untersuchungen zum Remote-Laserstrahlschweißen artungleicher Verbindungen an unterschiedlichen Stahl- und Aluminiumwerkstoffen aus dem Karosseriebau, Shaker Verlag, Aachen, 2017. ieee: 'O. Seffer, A. Springer, and S. Kaierle, Untersuchungen zum Remote-Laserstrahlschweißen artungleicher Verbindungen an unterschiedlichen Stahl- und Aluminiumwerkstoffen aus dem Karosseriebau. Aachen: Shaker Verlag, 2017, pp. 269–284.' mla: Seffer, Oliver, et al. “Untersuchungen zum Remote-Laserstrahlschweißen artungleicher Verbindungen an unterschiedlichen Stahl- und Aluminiumwerkstoffen aus dem Karosseriebau.” Fortschrittsberichte der Materialforschung und Werkstofftechnik Band 4, Shaker Verlag, 2017, pp. 269–284. short: O. Seffer, A. Springer, S. Kaierle, Untersuchungen zum Remote-Laserstrahlschweißen artungleicher Verbindungen an unterschiedlichen Stahl- und Aluminiumwerkstoffen aus dem Karosseriebau, Shaker Verlag, Aachen, 2017. ufg: 'Seffer, Oliver et. al. (2017): Untersuchungen zum Remote-Laserstrahlschweißen artungleicher Verbindungen an unterschiedlichen Stahl- und Aluminiumwerkstoffen aus dem Karosseriebau, Aachen.' van: 'Seffer O, Springer A, Kaierle S. Untersuchungen zum Remote-Laserstrahlschweißen artungleicher Verbindungen an unterschiedlichen Stahl- und Aluminiumwerkstoffen aus dem Karosseriebau. Fortschrittsberichte der Materialforschung und Werkstofftechnik Band 4. Aachen: Shaker Verlag; 2017.' conference: end_date: 2017-02-24 location: Clausthal-Zellerfeld name: 2. Niedersächsisches Symposium Materialtechnik start_date: 2017-02-23 date_created: 2022-05-02T14:43:52Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 extern: '1' language: - iso: ger page: 269–284 place: Aachen publication: Fortschrittsberichte der Materialforschung und Werkstofftechnik Band 4 publication_identifier: isbn: - 978-3-8440-5069-1 publication_status: published publisher: Shaker Verlag status: public title: Untersuchungen zum Remote-Laserstrahlschweißen artungleicher Verbindungen an unterschiedlichen Stahl- und Aluminiumwerkstoffen aus dem Karosseriebau type: conference_editor_article user_id: '79260' year: 2017 ... --- _id: '7888' author: - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle - first_name: Sarah full_name: Nothdurft, Sarah last_name: Nothdurft - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Bernd-Arno full_name: Behrens, Bernd-Arno last_name: Behrens - first_name: Jan full_name: Langner, Jan last_name: Langner - first_name: Jonathan full_name: Ross, Jonathan last_name: Ross - first_name: Malte full_name: Stonis, Malte last_name: Stonis citation: ama: 'Kaierle S, Nothdurft S, Springer A, et al. Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl/Aluminium-Mischverbindungen für den automobilen Leichtbau. Vol 461. 1st ed. Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung e.V. ; 2017.' apa: 'Kaierle, S., Nothdurft, S., Springer, A., Behrens, B.-A., Langner, J., Ross, J., & Stonis, M. (2017). Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl/Aluminium-Mischverbindungen für den automobilen Leichtbau (1st ed., Vol. 461). Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung e.V. .' bjps: 'Kaierle S et al. (2017) Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl/Aluminium-Mischverbindungen für den automobilen Leichtbau, 1st ed. Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung e.V. .' chicago: 'Kaierle, Stefan, Sarah Nothdurft, André Springer, Bernd-Arno Behrens, Jan Langner, Jonathan Ross, and Malte Stonis. Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl/Aluminium-Mischverbindungen für den automobilen Leichtbau. 1st ed. Vol. 461. Europäische Forschungsgesellschaft für Blechverarbeitung: EFB-Forschungsbericht . Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung e.V. , 2017.' chicago-de: 'Kaierle, Stefan, Sarah Nothdurft, André Springer, Bernd-Arno Behrens, Jan Langner, Jonathan Ross und Malte Stonis. 2017. Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl/Aluminium-Mischverbindungen für den automobilen Leichtbau. 1. Aufl. Bd. 461. Europäische Forschungsgesellschaft für Blechverarbeitung: EFB-Forschungsbericht . Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung e.V. .' din1505-2-1: 'Kaierle, Stefan ; Nothdurft, Sarah ; Springer, André ; Behrens, Bernd-Arno ; Langner, Jan ; Ross, Jonathan ; Stonis, Malte: Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl/Aluminium-Mischverbindungen für den automobilen Leichtbau, Europäische Forschungsgesellschaft für Blechverarbeitung: EFB-Forschungsbericht . Bd. 461. 1. Aufl. Hannover : Europäische Forschungsgesellschaft für Blechverarbeitung e.V. , 2017' havard: S. Kaierle, S. Nothdurft, A. Springer, B.-A. Behrens, J. Langner, J. Ross, M. Stonis, Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl/Aluminium-Mischverbindungen für den automobilen Leichtbau, 1st ed., Europäische Forschungsgesellschaft für Blechverarbeitung e.V. , Hannover, 2017. ieee: 'S. Kaierle et al., Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl/Aluminium-Mischverbindungen für den automobilen Leichtbau, 1st ed., vol. 461. Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung e.V. , 2017.' mla: Kaierle, Stefan, et al. Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl/Aluminium-Mischverbindungen für den automobilen Leichtbau. 1st ed., vol. 461, Europäische Forschungsgesellschaft für Blechverarbeitung e.V. , 2017. short: S. Kaierle, S. Nothdurft, A. Springer, B.-A. Behrens, J. Langner, J. Ross, M. Stonis, Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl/Aluminium-Mischverbindungen für den automobilen Leichtbau, 1st ed., Europäische Forschungsgesellschaft für Blechverarbeitung e.V. , Hannover, 2017. ufg: 'Kaierle, Stefan et. al. (2017): Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl/Aluminium-Mischverbindungen für den automobilen Leichtbau (=Europäische Forschungsgesellschaft für Blechverarbeitung: EFB-Forschungsbericht 461), Hannover, 1.' van: 'Kaierle S, Nothdurft S, Springer A, Behrens B-A, Langner J, Ross J, et al. Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl/Aluminium-Mischverbindungen für den automobilen Leichtbau. 1st ed. Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung e.V. ; 2017. 66, XVI p. (Europäische Forschungsgesellschaft für Blechverarbeitung: EFB-Forschungsbericht ; vol. 461).' date_created: 2022-05-02T15:00:46Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 edition: '1' extern: '1' intvolume: ' 461' language: - iso: ger page: 66, XVI place: Hannover publication_identifier: isbn: - 978-3-86776-511-4 publication_status: published publisher: 'Europäische Forschungsgesellschaft für Blechverarbeitung e.V. ' quality_controlled: '1' related_material: link: - relation: table_of_contents url: https://d-nb.info/1138456888/04 series_title: 'Europäische Forschungsgesellschaft für Blechverarbeitung: EFB-Forschungsbericht ' status: public title: Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl/Aluminium-Mischverbindungen für den automobilen Leichtbau type: book user_id: '79260' volume: 461 year: 2017 ... --- _id: '7853' author: - first_name: Christian full_name: Hennigs, Christian last_name: Hennigs - first_name: Rabi full_name: Lahdo, Rabi last_name: Lahdo - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle - first_name: Michael full_name: Hustedt, Michael last_name: Hustedt - first_name: Helmut full_name: Brand, Helmut last_name: Brand - first_name: Richard full_name: Wloka, Richard last_name: Wloka - first_name: Frank full_name: Zobel, Frank last_name: Zobel - first_name: Peter full_name: Dültgen, Peter last_name: Dültgen citation: ama: Hennigs C, Lahdo R, Springer A, et al. Laser-Based Gluing of Diamond-Tipped Saw Blades. (Dorsch F, Kaierle S, eds.). Society of Photo-Optical Instrumentation Engineers (SPIE); 2016. doi:10.1117/12.2212842 apa: 'Hennigs, C., Lahdo, R., Springer, A., Kaierle, S., Hustedt, M., Brand, H., … Dültgen, P. (2016). Laser-based gluing of diamond-tipped saw blades. (F. Dorsch & S. Kaierle, Eds.), SPIE Proceedings. San Francisco, California, United States: Society of Photo-Optical Instrumentation Engineers (SPIE). https://doi.org/10.1117/12.2212842' bjps: Hennigs C et al. (2016) Laser-Based Gluing of Diamond-Tipped Saw Blades, Dorsch F and Kaierle S (eds). Society of Photo-Optical Instrumentation Engineers (SPIE). chicago: Hennigs, Christian, Rabi Lahdo, André Springer, Stefan Kaierle, Michael Hustedt, Helmut Brand, Richard Wloka, Frank Zobel, and Peter Dültgen. Laser-Based Gluing of Diamond-Tipped Saw Blades. Edited by Friedhelm Dorsch and Stefan Kaierle. SPIE Proceedings. Society of Photo-Optical Instrumentation Engineers (SPIE), 2016. https://doi.org/10.1117/12.2212842. chicago-de: Hennigs, Christian, Rabi Lahdo, André Springer, Stefan Kaierle, Michael Hustedt, Helmut Brand, Richard Wloka, Frank Zobel und Peter Dültgen. 2016. Laser-based gluing of diamond-tipped saw blades. Hg. von Friedhelm Dorsch und Stefan Kaierle. SPIE Proceedings. Society of Photo-Optical Instrumentation Engineers (SPIE). doi:10.1117/12.2212842, . din1505-2-1: 'Hennigs, Christian ; Lahdo, Rabi ; Springer, André ; Kaierle, Stefan ; Hustedt, Michael ; Brand, Helmut ; Wloka, Richard ; Zobel, Frank ; u. a. ; Dorsch, F. ; Kaierle, S. (Hrsg.): Laser-based gluing of diamond-tipped saw blades : Society of Photo-Optical Instrumentation Engineers (SPIE), 2016' havard: C. Hennigs, R. Lahdo, A. Springer, S. Kaierle, M. Hustedt, H. Brand, R. Wloka, F. Zobel, P. Dültgen, Laser-based gluing of diamond-tipped saw blades, Society of Photo-Optical Instrumentation Engineers (SPIE), 2016. ieee: C. Hennigs et al., Laser-based gluing of diamond-tipped saw blades. Society of Photo-Optical Instrumentation Engineers (SPIE), 2016. mla: Hennigs, Christian, et al. “Laser-Based Gluing of Diamond-Tipped Saw Blades.” SPIE Proceedings, edited by Friedhelm Dorsch and Stefan Kaierle, Society of Photo-Optical Instrumentation Engineers (SPIE), 2016, doi:10.1117/12.2212842. short: C. Hennigs, R. Lahdo, A. Springer, S. Kaierle, M. Hustedt, H. Brand, R. Wloka, F. Zobel, P. Dültgen, Laser-Based Gluing of Diamond-Tipped Saw Blades, Society of Photo-Optical Instrumentation Engineers (SPIE), 2016. ufg: 'Hennigs, Christian et. al. (2016): Laser-based gluing of diamond-tipped saw blades.' van: Hennigs C, Lahdo R, Springer A, Kaierle S, Hustedt M, Brand H, et al. Laser-based gluing of diamond-tipped saw blades. Dorsch F, Kaierle S, editors. SPIE Proceedings. Society of Photo-Optical Instrumentation Engineers (SPIE); 2016. conference: location: San Francisco, California, United States name: SPIE LASE date_created: 2022-04-29T16:13:22Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.1117/12.2212842 editor: - first_name: Friedhelm full_name: Dorsch, Friedhelm last_name: Dorsch - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle extern: '1' language: - iso: eng publication: SPIE Proceedings publication_identifier: issn: - 0277-786X publication_status: published publisher: Society of Photo-Optical Instrumentation Engineers (SPIE) quality_controlled: '1' status: public title: Laser-based gluing of diamond-tipped saw blades type: conference_editor_article user_id: '79260' year: 2016 ... --- _id: '7854' article_number: '022429' author: - first_name: Sarah full_name: Nothdurft, Sarah last_name: Nothdurft - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle - first_name: Jonathan full_name: Ross, Jonathan last_name: Ross - first_name: Malte full_name: Stonis, Malte last_name: Stonis citation: ama: Nothdurft S, Springer A, Kaierle S, Ross J, Stonis M. Laser soldering and brazing of steel-aluminum sheets for tailored hybrid tubes. Journal of Laser Applications. 2016. doi:10.2351/1.4943996 apa: Nothdurft, S., Springer, A., Kaierle, S., Ross, J., & Stonis, M. (2016). Laser soldering and brazing of steel-aluminum sheets for tailored hybrid tubes. Journal of Laser Applications. https://doi.org/10.2351/1.4943996 bjps: Nothdurft S et al. (2016) Laser Soldering and Brazing of Steel-Aluminum Sheets for Tailored Hybrid Tubes. Journal of Laser Applications. chicago: Nothdurft, Sarah, André Springer, Stefan Kaierle, Jonathan Ross, and Malte Stonis. “Laser Soldering and Brazing of Steel-Aluminum Sheets for Tailored Hybrid Tubes.” Journal of Laser Applications, 2016. https://doi.org/10.2351/1.4943996. chicago-de: Nothdurft, Sarah, André Springer, Stefan Kaierle, Jonathan Ross und Malte Stonis. 2016. Laser soldering and brazing of steel-aluminum sheets for tailored hybrid tubes. Journal of Laser Applications. doi:10.2351/1.4943996, . din1505-2-1: 'Nothdurft, Sarah ; Springer, André ; Kaierle, Stefan ; Ross, Jonathan ; Stonis, Malte: Laser soldering and brazing of steel-aluminum sheets for tailored hybrid tubes. In: Journal of Laser Applications, Laser Institute of America (LIA) (2016)' havard: S. Nothdurft, A. Springer, S. Kaierle, J. Ross, M. Stonis, Laser soldering and brazing of steel-aluminum sheets for tailored hybrid tubes, Journal of Laser Applications. (2016). ieee: S. Nothdurft, A. Springer, S. Kaierle, J. Ross, and M. Stonis, “Laser soldering and brazing of steel-aluminum sheets for tailored hybrid tubes,” Journal of Laser Applications, 2016. mla: Nothdurft, Sarah, et al. “Laser Soldering and Brazing of Steel-Aluminum Sheets for Tailored Hybrid Tubes.” Journal of Laser Applications, 022429, Laser Institute of America (LIA), 2016, doi:10.2351/1.4943996. short: S. Nothdurft, A. Springer, S. Kaierle, J. Ross, M. Stonis, Journal of Laser Applications (2016). ufg: 'Nothdurft, Sarah et. al. (2016): Laser soldering and brazing of steel-aluminum sheets for tailored hybrid tubes, in: Journal of Laser Applications.' van: Nothdurft S, Springer A, Kaierle S, Ross J, Stonis M. Laser soldering and brazing of steel-aluminum sheets for tailored hybrid tubes. Journal of Laser Applications. 2016; date_created: 2022-04-29T16:13:43Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.2351/1.4943996 extern: '1' language: - iso: eng publication: Journal of Laser Applications publication_identifier: issn: - 1042-346X - 1938-1387 publication_status: published publisher: Laser Institute of America (LIA) quality_controlled: '1' status: public title: Laser soldering and brazing of steel-aluminum sheets for tailored hybrid tubes type: industry_journal_article user_id: '79260' year: 2016 ... --- _id: '7855' author: - first_name: Rabi full_name: Lahdo, Rabi last_name: Lahdo - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Ronny full_name: Pfeifer, Ronny last_name: Pfeifer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle - first_name: Ludger full_name: Overmeyer, Ludger last_name: Overmeyer citation: ama: Lahdo R, Springer A, Pfeifer R, Kaierle S, Overmeyer L. High-power Laser Welding of Thick Steel-aluminum Dissimilar Joints. Physics Procedia. 2016:396-405. doi:10.1016/j.phpro.2016.08.041 apa: Lahdo, R., Springer, A., Pfeifer, R., Kaierle, S., & Overmeyer, L. (2016). High-power Laser Welding of Thick Steel-aluminum Dissimilar Joints. Physics Procedia, 396–405. https://doi.org/10.1016/j.phpro.2016.08.041 bjps: Lahdo R et al. (2016) High-Power Laser Welding of Thick Steel-Aluminum Dissimilar Joints. Physics Procedia 396–405. chicago: Lahdo, Rabi, André Springer, Ronny Pfeifer, Stefan Kaierle, and Ludger Overmeyer. “High-Power Laser Welding of Thick Steel-Aluminum Dissimilar Joints.” Physics Procedia, 2016, 396–405. https://doi.org/10.1016/j.phpro.2016.08.041. chicago-de: 'Lahdo, Rabi, André Springer, Ronny Pfeifer, Stefan Kaierle und Ludger Overmeyer. 2016. High-power Laser Welding of Thick Steel-aluminum Dissimilar Joints. Physics Procedia: 396–405. doi:10.1016/j.phpro.2016.08.041, .' din1505-2-1: 'Lahdo, Rabi ; Springer, André ; Pfeifer, Ronny ; Kaierle, Stefan ; Overmeyer, Ludger: High-power Laser Welding of Thick Steel-aluminum Dissimilar Joints. In: Physics Procedia, Elsevier (2016), S. 396–405' havard: R. Lahdo, A. Springer, R. Pfeifer, S. Kaierle, L. Overmeyer, High-power Laser Welding of Thick Steel-aluminum Dissimilar Joints, Physics Procedia. (2016) 396–405. ieee: R. Lahdo, A. Springer, R. Pfeifer, S. Kaierle, and L. Overmeyer, “High-power Laser Welding of Thick Steel-aluminum Dissimilar Joints,” Physics Procedia, pp. 396–405, 2016. mla: Lahdo, Rabi, et al. “High-Power Laser Welding of Thick Steel-Aluminum Dissimilar Joints.” Physics Procedia, Elsevier, 2016, pp. 396–405, doi:10.1016/j.phpro.2016.08.041. short: R. Lahdo, A. Springer, R. Pfeifer, S. Kaierle, L. Overmeyer, Physics Procedia (2016) 396–405. ufg: 'Lahdo, Rabi et. al. (2016): High-power Laser Welding of Thick Steel-aluminum Dissimilar Joints, in: Physics Procedia, S. 396–405.' van: Lahdo R, Springer A, Pfeifer R, Kaierle S, Overmeyer L. High-power Laser Welding of Thick Steel-aluminum Dissimilar Joints. Physics Procedia. 2016;396–405. date_created: 2022-04-29T16:14:09Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.1016/j.phpro.2016.08.041 extern: '1' language: - iso: eng page: 396-405 publication: Physics Procedia publication_identifier: issn: - 1875-3892 publication_status: published publisher: Elsevier quality_controlled: '1' status: public title: High-power Laser Welding of Thick Steel-aluminum Dissimilar Joints type: scientific_journal_article user_id: '79260' year: 2016 ... --- _id: '7856' author: - first_name: Christian full_name: Hennigs, Christian last_name: Hennigs - first_name: Rabi full_name: Lahdo, Rabi last_name: Lahdo - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Michael full_name: Hustedt, Michael last_name: Hustedt - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle - first_name: Helmut full_name: Brand, Helmut last_name: Brand - first_name: Frank full_name: Zobel, Frank last_name: Zobel - first_name: Richard full_name: Wloka, Richard last_name: Wloka - first_name: Peter full_name: Dültgen, Peter last_name: Dültgen citation: ama: 'Hennigs C, Lahdo R, Springer A, et al. Schleifsegmente laserbasiert kleben : Neuer Prozess zum Bestücken von Diamant-Trennschleifscheiben. adhäsion KLEBEN & DICHTEN. 2016;60:22-27. doi:10.1007/s35145-015-0607-1' apa: 'Hennigs, C., Lahdo, R., Springer, A., Hustedt, M., Kaierle, S., Brand, H., … Dültgen, P. (2016). Schleifsegmente laserbasiert kleben : Neuer Prozess zum Bestücken von Diamant-Trennschleifscheiben. adhäsion KLEBEN & DICHTEN, 60, 22–27. https://doi.org/10.1007/s35145-015-0607-1' bjps: 'Hennigs C et al. (2016) Schleifsegmente laserbasiert kleben : Neuer Prozess zum Bestücken von Diamant-Trennschleifscheiben. adhäsion KLEBEN & DICHTEN 60, 22–27.' chicago: 'Hennigs, Christian, Rabi Lahdo, André Springer, Michael Hustedt, Stefan Kaierle, Helmut Brand, Frank Zobel, Richard Wloka, and Peter Dültgen. “Schleifsegmente laserbasiert kleben : Neuer Prozess zum Bestücken von Diamant-Trennschleifscheiben.” adhäsion KLEBEN & DICHTEN 60 (2016): 22–27. https://doi.org/10.1007/s35145-015-0607-1.' chicago-de: 'Hennigs, Christian, Rabi Lahdo, André Springer, Michael Hustedt, Stefan Kaierle, Helmut Brand, Frank Zobel, Richard Wloka und Peter Dültgen. 2016. Schleifsegmente laserbasiert kleben : Neuer Prozess zum Bestücken von Diamant-Trennschleifscheiben. adhäsion KLEBEN & DICHTEN 60: 22–27. doi:10.1007/s35145-015-0607-1, .' din1505-2-1: 'Hennigs, Christian ; Lahdo, Rabi ; Springer, André ; Hustedt, Michael ; Kaierle, Stefan ; Brand, Helmut ; Zobel, Frank ; Wloka, Richard ; u. a.: Schleifsegmente laserbasiert kleben : Neuer Prozess zum Bestücken von Diamant-Trennschleifscheiben. In: adhäsion KLEBEN & DICHTEN Bd. 60, Springer (2016), S. 22–27' havard: 'C. Hennigs, R. Lahdo, A. Springer, M. Hustedt, S. Kaierle, H. Brand, F. Zobel, R. Wloka, P. Dültgen, Schleifsegmente laserbasiert kleben : Neuer Prozess zum Bestücken von Diamant-Trennschleifscheiben, adhäsion KLEBEN & DICHTEN. 60 (2016) 22–27.' ieee: 'C. Hennigs et al., “Schleifsegmente laserbasiert kleben : Neuer Prozess zum Bestücken von Diamant-Trennschleifscheiben,” adhäsion KLEBEN & DICHTEN, vol. 60, pp. 22–27, 2016.' mla: 'Hennigs, Christian, et al. “Schleifsegmente laserbasiert kleben : Neuer Prozess zum Bestücken von Diamant-Trennschleifscheiben.” adhäsion KLEBEN & DICHTEN, vol. 60, Springer, 2016, pp. 22–27, doi:10.1007/s35145-015-0607-1.' short: C. Hennigs, R. Lahdo, A. Springer, M. Hustedt, S. Kaierle, H. Brand, F. Zobel, R. Wloka, P. Dültgen, adhäsion KLEBEN & DICHTEN 60 (2016) 22–27. ufg: 'Hennigs, Christian et. al. (2016): Schleifsegmente laserbasiert kleben : Neuer Prozess zum Bestücken von Diamant-Trennschleifscheiben, in: adhäsion KLEBEN & DICHTEN 60, S. 22–27.' van: 'Hennigs C, Lahdo R, Springer A, Hustedt M, Kaierle S, Brand H, et al. Schleifsegmente laserbasiert kleben : Neuer Prozess zum Bestücken von Diamant-Trennschleifscheiben. adhäsion KLEBEN & DICHTEN. 2016;60:22–7.' date_created: 2022-04-29T16:14:32Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.1007/s35145-015-0607-1 extern: '1' intvolume: ' 60' language: - iso: ger page: 22-27 publication: adhäsion KLEBEN & DICHTEN publication_identifier: issn: - 1619-1919 - 2192-8681 publication_status: published publisher: Springer quality_controlled: '1' status: public title: 'Schleifsegmente laserbasiert kleben : Neuer Prozess zum Bestücken von Diamant-Trennschleifscheiben' type: scientific_journal_article user_id: '79260' volume: 60 year: 2016 ... --- _id: '7857' author: - first_name: Oliver full_name: Seffer, Oliver last_name: Seffer - first_name: Ronny full_name: Pfeifer, Ronny last_name: Pfeifer - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle citation: ama: Seffer O, Pfeifer R, Springer A, Kaierle S. Investigations on Laser Beam Welding of Different Dissimilar Joints of Steel and Aluminum Alloys for Automotive Lightweight Construction. Physics Procedia. 2016;83:383-395. doi:10.1016/j.phpro.2016.08.040 apa: Seffer, O., Pfeifer, R., Springer, A., & Kaierle, S. (2016). Investigations on Laser Beam Welding of Different Dissimilar Joints of Steel and Aluminum Alloys for Automotive Lightweight Construction. Physics Procedia, 83, 383–395. https://doi.org/10.1016/j.phpro.2016.08.040 bjps: Seffer O et al. (2016) Investigations on Laser Beam Welding of Different Dissimilar Joints of Steel and Aluminum Alloys for Automotive Lightweight Construction. Physics Procedia 83, 383–395. chicago: 'Seffer, Oliver, Ronny Pfeifer, André Springer, and Stefan Kaierle. “Investigations on Laser Beam Welding of Different Dissimilar Joints of Steel and Aluminum Alloys for Automotive Lightweight Construction.” Physics Procedia 83 (2016): 383–95. https://doi.org/10.1016/j.phpro.2016.08.040.' chicago-de: 'Seffer, Oliver, Ronny Pfeifer, André Springer und Stefan Kaierle. 2016. Investigations on Laser Beam Welding of Different Dissimilar Joints of Steel and Aluminum Alloys for Automotive Lightweight Construction. Physics Procedia 83: 383–395. doi:10.1016/j.phpro.2016.08.040, .' din1505-2-1: 'Seffer, Oliver ; Pfeifer, Ronny ; Springer, André ; Kaierle, Stefan: Investigations on Laser Beam Welding of Different Dissimilar Joints of Steel and Aluminum Alloys for Automotive Lightweight Construction. In: Physics Procedia Bd. 83, Elsevier (2016), S. 383–395' havard: O. Seffer, R. Pfeifer, A. Springer, S. Kaierle, Investigations on Laser Beam Welding of Different Dissimilar Joints of Steel and Aluminum Alloys for Automotive Lightweight Construction, Physics Procedia. 83 (2016) 383–395. ieee: O. Seffer, R. Pfeifer, A. Springer, and S. Kaierle, “Investigations on Laser Beam Welding of Different Dissimilar Joints of Steel and Aluminum Alloys for Automotive Lightweight Construction,” Physics Procedia, vol. 83, pp. 383–395, 2016. mla: Seffer, Oliver, et al. “Investigations on Laser Beam Welding of Different Dissimilar Joints of Steel and Aluminum Alloys for Automotive Lightweight Construction.” Physics Procedia, vol. 83, Elsevier, 2016, pp. 383–95, doi:10.1016/j.phpro.2016.08.040. short: O. Seffer, R. Pfeifer, A. Springer, S. Kaierle, Physics Procedia 83 (2016) 383–395. ufg: 'Seffer, Oliver et. al. (2016): Investigations on Laser Beam Welding of Different Dissimilar Joints of Steel and Aluminum Alloys for Automotive Lightweight Construction, in: Physics Procedia 83, S. 383–395.' van: Seffer O, Pfeifer R, Springer A, Kaierle S. Investigations on Laser Beam Welding of Different Dissimilar Joints of Steel and Aluminum Alloys for Automotive Lightweight Construction. Physics Procedia. 2016;83:383–95. date_created: 2022-04-29T16:14:53Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.1016/j.phpro.2016.08.040 extern: '1' intvolume: ' 83' language: - iso: eng main_file_link: - open_access: '1' oa: '1' page: 383-395 publication: Physics Procedia publication_identifier: issn: - 1875-3892 publication_status: published publisher: Elsevier quality_controlled: '1' status: public title: Investigations on Laser Beam Welding of Different Dissimilar Joints of Steel and Aluminum Alloys for Automotive Lightweight Construction type: scientific_journal_article user_id: '79260' volume: 83 year: 2016 ... --- _id: '7858' author: - first_name: Rabi full_name: Lahdo, Rabi last_name: Lahdo - first_name: Oliver full_name: Seffer, Oliver last_name: Seffer - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle - first_name: Mareike full_name: Collmann, Mareike last_name: Collmann - first_name: Peter full_name: Schaumann, Peter last_name: Schaumann citation: ama: Lahdo R, Seffer O, Springer A, Kaierle S, Collmann M, Schaumann P. Laserstrahl-MSG-Hybridschweißen von Feinkornbaustählen für den Einsatz im Stahlbau. Stahlbau. 2015;84(12):1016-1022. doi:10.1002/stab.201510344 apa: Lahdo, R., Seffer, O., Springer, A., Kaierle, S., Collmann, M., & Schaumann, P. (2015). Laserstrahl-MSG-Hybridschweißen von Feinkornbaustählen für den Einsatz im Stahlbau. Stahlbau, 84(12), 1016–1022. https://doi.org/10.1002/stab.201510344 bjps: Lahdo R et al. (2015) Laserstrahl-MSG-Hybridschweißen von Feinkornbaustählen Für Den Einsatz Im Stahlbau. Stahlbau 84, 1016–1022. chicago: 'Lahdo, Rabi, Oliver Seffer, André Springer, Stefan Kaierle, Mareike Collmann, and Peter Schaumann. “Laserstrahl-MSG-Hybridschweißen von Feinkornbaustählen Für Den Einsatz Im Stahlbau.” Stahlbau 84, no. 12 (2015): 1016–22. https://doi.org/10.1002/stab.201510344.' chicago-de: 'Lahdo, Rabi, Oliver Seffer, André Springer, Stefan Kaierle, Mareike Collmann und Peter Schaumann. 2015. Laserstrahl-MSG-Hybridschweißen von Feinkornbaustählen für den Einsatz im Stahlbau. Stahlbau 84, Nr. 12: 1016–1022. doi:10.1002/stab.201510344, .' din1505-2-1: 'Lahdo, Rabi ; Seffer, Oliver ; Springer, André ; Kaierle, Stefan ; Collmann, Mareike ; Schaumann, Peter: Laserstrahl-MSG-Hybridschweißen von Feinkornbaustählen für den Einsatz im Stahlbau. In: Stahlbau Bd. 84, Wiley (2015), Nr. 12, S. 1016–1022' havard: R. Lahdo, O. Seffer, A. Springer, S. Kaierle, M. Collmann, P. Schaumann, Laserstrahl-MSG-Hybridschweißen von Feinkornbaustählen für den Einsatz im Stahlbau, Stahlbau. 84 (2015) 1016–1022. ieee: R. Lahdo, O. Seffer, A. Springer, S. Kaierle, M. Collmann, and P. Schaumann, “Laserstrahl-MSG-Hybridschweißen von Feinkornbaustählen für den Einsatz im Stahlbau,” Stahlbau, vol. 84, no. 12, pp. 1016–1022, 2015. mla: Lahdo, Rabi, et al. “Laserstrahl-MSG-Hybridschweißen von Feinkornbaustählen Für Den Einsatz Im Stahlbau.” Stahlbau, vol. 84, no. 12, Wiley, 2015, pp. 1016–22, doi:10.1002/stab.201510344. short: R. Lahdo, O. Seffer, A. Springer, S. Kaierle, M. Collmann, P. Schaumann, Stahlbau 84 (2015) 1016–1022. ufg: 'Lahdo, Rabi et. al. (2015): Laserstrahl-MSG-Hybridschweißen von Feinkornbaustählen für den Einsatz im Stahlbau, in: Stahlbau 84 (12), S. 1016–1022.' van: Lahdo R, Seffer O, Springer A, Kaierle S, Collmann M, Schaumann P. Laserstrahl-MSG-Hybridschweißen von Feinkornbaustählen für den Einsatz im Stahlbau. Stahlbau. 2015;84(12):1016–22. date_created: 2022-04-29T16:15:13Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.1002/stab.201510344 extern: '1' intvolume: ' 84' issue: '12' language: - iso: eng main_file_link: - open_access: '1' oa: '1' page: 1016-1022 publication: Stahlbau publication_identifier: issn: - 0038-9145 publication_status: published publisher: Wiley quality_controlled: '1' status: public title: Laserstrahl-MSG-Hybridschweißen von Feinkornbaustählen für den Einsatz im Stahlbau type: scientific_journal_article user_id: '79260' volume: 84 year: 2015 ... --- _id: '7859' article_number: S29006 author: - first_name: Velten full_name: Behm, Velten last_name: Behm - first_name: Gerd-Albert full_name: Hoffmann, Gerd-Albert last_name: Hoffmann - first_name: Jürgen von full_name: Trzebiatowski, Jürgen von last_name: Trzebiatowski - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle - first_name: Ludger full_name: Overmeyer, Ludger last_name: Overmeyer citation: ama: Behm V, Hoffmann G-A, Trzebiatowski J von, Springer A, Kaierle S, Overmeyer L. Method for evaluating the behavior of laser welded dissimilar material seams in single overlap configuration under impact loads by the example of twinning induced plasticity steels. Journal of Laser Applications. 2015. doi:10.2351/1.4906384 apa: Behm, V., Hoffmann, G.-A., Trzebiatowski, J. von, Springer, A., Kaierle, S., & Overmeyer, L. (2015). Method for evaluating the behavior of laser welded dissimilar material seams in single overlap configuration under impact loads by the example of twinning induced plasticity steels. Journal of Laser Applications. https://doi.org/10.2351/1.4906384 bjps: Behm V et al. (2015) Method for Evaluating the Behavior of Laser Welded Dissimilar Material Seams in Single Overlap Configuration under Impact Loads by the Example of Twinning Induced Plasticity Steels. Journal of Laser Applications. chicago: Behm, Velten, Gerd-Albert Hoffmann, Jürgen von Trzebiatowski, André Springer, Stefan Kaierle, and Ludger Overmeyer. “Method for Evaluating the Behavior of Laser Welded Dissimilar Material Seams in Single Overlap Configuration under Impact Loads by the Example of Twinning Induced Plasticity Steels.” Journal of Laser Applications, 2015. https://doi.org/10.2351/1.4906384. chicago-de: Behm, Velten, Gerd-Albert Hoffmann, Jürgen von Trzebiatowski, André Springer, Stefan Kaierle und Ludger Overmeyer. 2015. Method for evaluating the behavior of laser welded dissimilar material seams in single overlap configuration under impact loads by the example of twinning induced plasticity steels. Journal of Laser Applications. doi:10.2351/1.4906384, . din1505-2-1: 'Behm, Velten ; Hoffmann, Gerd-Albert ; Trzebiatowski, Jürgen von ; Springer, André ; Kaierle, Stefan ; Overmeyer, Ludger: Method for evaluating the behavior of laser welded dissimilar material seams in single overlap configuration under impact loads by the example of twinning induced plasticity steels. In: Journal of Laser Applications, Laser Institute of America (LIA) (2015)' havard: V. Behm, G.-A. Hoffmann, J. von Trzebiatowski, A. Springer, S. Kaierle, L. Overmeyer, Method for evaluating the behavior of laser welded dissimilar material seams in single overlap configuration under impact loads by the example of twinning induced plasticity steels, Journal of Laser Applications. (2015). ieee: V. Behm, G.-A. Hoffmann, J. von Trzebiatowski, A. Springer, S. Kaierle, and L. Overmeyer, “Method for evaluating the behavior of laser welded dissimilar material seams in single overlap configuration under impact loads by the example of twinning induced plasticity steels,” Journal of Laser Applications, 2015. mla: Behm, Velten, et al. “Method for Evaluating the Behavior of Laser Welded Dissimilar Material Seams in Single Overlap Configuration under Impact Loads by the Example of Twinning Induced Plasticity Steels.” Journal of Laser Applications, S29006, Laser Institute of America (LIA), 2015, doi:10.2351/1.4906384. short: V. Behm, G.-A. Hoffmann, J. von Trzebiatowski, A. Springer, S. Kaierle, L. Overmeyer, Journal of Laser Applications (2015). ufg: 'Behm, Velten et. al. (2015): Method for evaluating the behavior of laser welded dissimilar material seams in single overlap configuration under impact loads by the example of twinning induced plasticity steels, in: Journal of Laser Applications.' van: Behm V, Hoffmann G-A, Trzebiatowski J von, Springer A, Kaierle S, Overmeyer L. Method for evaluating the behavior of laser welded dissimilar material seams in single overlap configuration under impact loads by the example of twinning induced plasticity steels. Journal of Laser Applications. 2015; date_created: 2022-04-29T16:15:32Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.2351/1.4906384 extern: '1' language: - iso: eng publication: Journal of Laser Applications publication_identifier: issn: - 1042-346X - 1938-1387 publication_status: published publisher: Laser Institute of America (LIA) quality_controlled: '1' status: public title: Method for evaluating the behavior of laser welded dissimilar material seams in single overlap configuration under impact loads by the example of twinning induced plasticity steels type: industry_journal_article user_id: '79260' year: 2015 ... --- _id: '7883' author: - first_name: Dietmar full_name: Kracht, Dietmar last_name: Kracht - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Oliver full_name: Seffer, Oliver last_name: Seffer - first_name: Rabi full_name: Lahdo, Rabi last_name: Lahdo - first_name: B. full_name: Nacke, B. last_name: Nacke - first_name: H. full_name: Schülbe, H. last_name: Schülbe - first_name: J. full_name: Neumeyer, J. last_name: Neumeyer - first_name: P full_name: Schaumann, P last_name: Schaumann - first_name: M full_name: Collmann, M last_name: Collmann citation: ama: 'Kracht D, Kaierle S, Springer A, et al. Prozesssicheres und leistungsstarkes Fügen von hochfesten Feinkornbaustählen durch ein Hybridschweißverfahren mit integrierter Vorwärmung. Vol P 838. (Forschungsvereinigung Stahlanwendung e.V., ed.). Düsseldorf: Verl. und Vertriebsges.; 2015.' apa: 'Kracht, D., Kaierle, S., Springer, A., Seffer, O., Lahdo, R., Nacke, B., … Collmann, M. (2015). Prozesssicheres und leistungsstarkes Fügen von hochfesten Feinkornbaustählen durch ein Hybridschweißverfahren mit integrierter Vorwärmung. (Forschungsvereinigung Stahlanwendung e.V., Ed.) (Vol. P 838). Düsseldorf: Verl. und Vertriebsges.' bjps: 'Kracht D et al. (2015) Prozesssicheres und leistungsstarkes Fügen von hochfesten Feinkornbaustählen durch ein Hybridschweißverfahren mit integrierter Vorwärmung, Forschungsvereinigung Stahlanwendung e.V. (ed.). Düsseldorf: Verl. und Vertriebsges.' chicago: 'Kracht, Dietmar, Stefan Kaierle, André Springer, Oliver Seffer, Rabi Lahdo, B. Nacke, H. Schülbe, J. Neumeyer, P Schaumann, and M Collmann. Prozesssicheres und leistungsstarkes Fügen von hochfesten Feinkornbaustählen durch ein Hybridschweißverfahren mit integrierter Vorwärmung. Edited by Forschungsvereinigung Stahlanwendung e.V. Vol. P 838. Forschung für die Praxis . Düsseldorf: Verl. und Vertriebsges., 2015.' chicago-de: 'Kracht, Dietmar, Stefan Kaierle, André Springer, Oliver Seffer, Rabi Lahdo, B. Nacke, H. Schülbe, J. Neumeyer, P Schaumann und M Collmann. 2015. Prozesssicheres und leistungsstarkes Fügen von hochfesten Feinkornbaustählen durch ein Hybridschweißverfahren mit integrierter Vorwärmung. Hg. von Forschungsvereinigung Stahlanwendung e.V. Bd. P 838. Forschung für die Praxis . Düsseldorf: Verl. und Vertriebsges.' din1505-2-1: 'Kracht, Dietmar ; Kaierle, Stefan ; Springer, André ; Seffer, Oliver ; Lahdo, Rabi ; Nacke, B. ; Schülbe, H. ; Neumeyer, J. ; u. a. ; Forschungsvereinigung Stahlanwendung e.V. (Hrsg.): Prozesssicheres und leistungsstarkes Fügen von hochfesten Feinkornbaustählen durch ein Hybridschweißverfahren mit integrierter Vorwärmung, Forschung für die Praxis . Bd. P 838. Düsseldorf : Verl. und Vertriebsges., 2015' havard: D. Kracht, S. Kaierle, A. Springer, O. Seffer, R. Lahdo, B. Nacke, H. Schülbe, J. Neumeyer, P. Schaumann, M. Collmann, Prozesssicheres und leistungsstarkes Fügen von hochfesten Feinkornbaustählen durch ein Hybridschweißverfahren mit integrierter Vorwärmung, Verl. und Vertriebsges., Düsseldorf, 2015. ieee: 'D. Kracht et al., Prozesssicheres und leistungsstarkes Fügen von hochfesten Feinkornbaustählen durch ein Hybridschweißverfahren mit integrierter Vorwärmung, vol. P 838. Düsseldorf: Verl. und Vertriebsges., 2015.' mla: Kracht, Dietmar, et al. Prozesssicheres und leistungsstarkes Fügen von hochfesten Feinkornbaustählen durch ein Hybridschweißverfahren mit integrierter Vorwärmung. Edited by Forschungsvereinigung Stahlanwendung e.V., vol. P 838, Verl. und Vertriebsges., 2015. short: D. Kracht, S. Kaierle, A. Springer, O. Seffer, R. Lahdo, B. Nacke, H. Schülbe, J. Neumeyer, P. Schaumann, M. Collmann, Prozesssicheres und leistungsstarkes Fügen von hochfesten Feinkornbaustählen durch ein Hybridschweißverfahren mit integrierter Vorwärmung, Verl. und Vertriebsges., Düsseldorf, 2015. ufg: 'Kracht, Dietmar et. al. (2015): Prozesssicheres und leistungsstarkes Fügen von hochfesten Feinkornbaustählen durch ein Hybridschweißverfahren mit integrierter Vorwärmung (=Forschung für die Praxis P 838), Düsseldorf.' van: 'Kracht D, Kaierle S, Springer A, Seffer O, Lahdo R, Nacke B, et al. Prozesssicheres und leistungsstarkes Fügen von hochfesten Feinkornbaustählen durch ein Hybridschweißverfahren mit integrierter Vorwärmung. Forschungsvereinigung Stahlanwendung e.V., editor. Düsseldorf: Verl. und Vertriebsges.; 2015. 191 p. (Forschung für die Praxis ; vol. P 838).' corporate_editor: - Forschungsvereinigung Stahlanwendung e.V. date_created: 2022-05-02T13:52:51Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 extern: '1' language: - iso: ger page: '191' place: Düsseldorf publication_identifier: isbn: - 978-3-942541-58-9 publication_status: published publisher: Verl. und Vertriebsges. series_title: 'Forschung für die Praxis ' status: public title: Prozesssicheres und leistungsstarkes Fügen von hochfesten Feinkornbaustählen durch ein Hybridschweißverfahren mit integrierter Vorwärmung type: book user_id: '79260' volume: P 838 year: 2015 ... --- _id: '7889' author: - first_name: J. full_name: Ross, J. last_name: Ross - first_name: S. full_name: Nothdurft, S. last_name: Nothdurft - first_name: M. full_name: Stonis, M. last_name: Stonis - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: S. full_name: Kaierle, S. last_name: Kaierle - first_name: B.-A. full_name: Behrens, B.-A. last_name: Behrens citation: ama: 'Ross J, Nothdurft S, Stonis M, Springer A, Kaierle S, Behrens B-A. Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl-Alu-minium-Mischverbindungen für den automobilen Leichtbau. (Europäische Forschungsgesellschaft für Blechverarbeitung e.V., ed.). Hannover: EFB; 2015:175–184.' apa: 'Ross, J., Nothdurft, S., Stonis, M., Springer, A., Kaierle, S., & Behrens, B.-A. (2015). Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl-Alu-minium-Mischverbindungen für den automobilen Leichtbau. (Europäische Forschungsgesellschaft für Blechverarbeitung e.V., Ed.), Tagungsband T 40 - Intermezzo der hybriden Werkstofflösungen: Hat Blech eine Zukunft? (pp. 175–184). Hannover: EFB.' bjps: 'Ross J et al. (2015) Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl-Alu-minium-Mischverbindungen für den automobilen Leichtbau, Europäische Forschungsgesellschaft für Blechverarbeitung e.V. (ed.). Hannover: EFB.' chicago: 'Ross, J., S. Nothdurft, M. Stonis, André Springer, S. Kaierle, and B.-A. Behrens. Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl-Alu-minium-Mischverbindungen für den automobilen Leichtbau. Edited by Europäische Forschungsgesellschaft für Blechverarbeitung e.V. Tagungsband T 40 - Intermezzo der hybriden Werkstofflösungen: Hat Blech eine Zukunft? Hannover: EFB, 2015.' chicago-de: 'Ross, J., S. Nothdurft, M. Stonis, André Springer, S. Kaierle und B.-A. Behrens. 2015. Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl-Alu-minium-Mischverbindungen für den automobilen Leichtbau. Hg. von Europäische Forschungsgesellschaft für Blechverarbeitung e.V. Tagungsband T 40 - Intermezzo der hybriden Werkstofflösungen: Hat Blech eine Zukunft? Hannover: EFB.' din1505-2-1: 'Ross, J. ; Nothdurft, S. ; Stonis, M. ; Springer, André ; Kaierle, S. ; Behrens, B.-A. ; Europäische Forschungsgesellschaft für Blechverarbeitung e.V. (Hrsg.): Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl-Alu-minium-Mischverbindungen für den automobilen Leichtbau. Hannover : EFB, 2015' havard: J. Ross, S. Nothdurft, M. Stonis, A. Springer, S. Kaierle, B.-A. Behrens, Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl-Alu-minium-Mischverbindungen für den automobilen Leichtbau, EFB, Hannover, 2015. ieee: 'J. Ross, S. Nothdurft, M. Stonis, A. Springer, S. Kaierle, and B.-A. Behrens, Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl-Alu-minium-Mischverbindungen für den automobilen Leichtbau. Hannover: EFB, 2015, pp. 175–184.' mla: 'Ross, J., et al. “Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl-Alu-minium-Mischverbindungen für den automobilen Leichtbau.” Tagungsband T 40 - Intermezzo der hybriden Werkstofflösungen: Hat Blech eine Zukunft?, edited by Europäische Forschungsgesellschaft für Blechverarbeitung e.V., EFB, 2015, pp. 175–184.' short: J. Ross, S. Nothdurft, M. Stonis, A. Springer, S. Kaierle, B.-A. Behrens, Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl-Alu-minium-Mischverbindungen für den automobilen Leichtbau, EFB, Hannover, 2015. ufg: 'Ross, J. et. al. (2015): Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl-Alu-minium-Mischverbindungen für den automobilen Leichtbau, Hannover.' van: 'Ross J, Nothdurft S, Stonis M, Springer A, Kaierle S, Behrens B-A. Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl-Alu-minium-Mischverbindungen für den automobilen Leichtbau. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., editor. Tagungsband T 40 - Intermezzo der hybriden Werkstofflösungen: Hat Blech eine Zukunft? Hannover: EFB; 2015.' conference: end_date: 2015-03-25 location: Bad Boll name: 35. EFB-Kolloquium Blechverarbeitung start_date: 2015-03-24 corporate_editor: - Europäische Forschungsgesellschaft für Blechverarbeitung e.V. date_created: 2022-05-02T15:04:30Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 extern: '1' language: - iso: ger page: 175–184 place: Hannover publication: 'Tagungsband T 40 - Intermezzo der hybriden Werkstofflösungen: Hat Blech eine Zukunft?' publication_identifier: isbn: - 978-3-86776-452-0 publication_status: published publisher: EFB related_material: link: - relation: table_of_contents url: https://www.efb.de/efb-tagungsband-nr-040.html status: public title: Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl-Alu-minium-Mischverbindungen für den automobilen Leichtbau type: conference_editor_article user_id: '79260' year: 2015 ... --- _id: '7860' author: - first_name: Velten full_name: Behm, Velten last_name: Behm - first_name: Matthias full_name: Höfemann, Matthias last_name: Höfemann - first_name: Ansgar full_name: Hatscher, Ansgar last_name: Hatscher - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle - first_name: David full_name: Hein, David last_name: Hein - first_name: Manuel full_name: Otto, Manuel last_name: Otto - first_name: Ludger full_name: Overmeyer, Ludger last_name: Overmeyer citation: ama: Behm V, Höfemann M, Hatscher A, et al. Investigations on Laser Beam Welding Dissimilar Material Combinations of Austenitic High Manganese (FeMn) and Ferrite Steels. Physics Procedia. 2014;56:610-619. doi:10.1016/j.phpro.2014.08.049 apa: Behm, V., Höfemann, M., Hatscher, A., Springer, A., Kaierle, S., Hein, D., … Overmeyer, L. (2014). Investigations on Laser Beam Welding Dissimilar Material Combinations of Austenitic High Manganese (FeMn) and Ferrite Steels. Physics Procedia, 56, 610–619. https://doi.org/10.1016/j.phpro.2014.08.049 bjps: Behm V et al. (2014) Investigations on Laser Beam Welding Dissimilar Material Combinations of Austenitic High Manganese (FeMn) and Ferrite Steels. Physics Procedia 56, 610–619. chicago: 'Behm, Velten, Matthias Höfemann, Ansgar Hatscher, André Springer, Stefan Kaierle, David Hein, Manuel Otto, and Ludger Overmeyer. “Investigations on Laser Beam Welding Dissimilar Material Combinations of Austenitic High Manganese (FeMn) and Ferrite Steels.” Physics Procedia 56 (2014): 610–19. https://doi.org/10.1016/j.phpro.2014.08.049.' chicago-de: 'Behm, Velten, Matthias Höfemann, Ansgar Hatscher, André Springer, Stefan Kaierle, David Hein, Manuel Otto und Ludger Overmeyer. 2014. Investigations on Laser Beam Welding Dissimilar Material Combinations of Austenitic High Manganese (FeMn) and Ferrite Steels. Physics Procedia 56: 610–619. doi:10.1016/j.phpro.2014.08.049, .' din1505-2-1: 'Behm, Velten ; Höfemann, Matthias ; Hatscher, Ansgar ; Springer, André ; Kaierle, Stefan ; Hein, David ; Otto, Manuel ; Overmeyer, Ludger: Investigations on Laser Beam Welding Dissimilar Material Combinations of Austenitic High Manganese (FeMn) and Ferrite Steels. In: Physics Procedia Bd. 56, Elsevier (2014), S. 610–619' havard: V. Behm, M. Höfemann, A. Hatscher, A. Springer, S. Kaierle, D. Hein, M. Otto, L. Overmeyer, Investigations on Laser Beam Welding Dissimilar Material Combinations of Austenitic High Manganese (FeMn) and Ferrite Steels, Physics Procedia. 56 (2014) 610–619. ieee: V. Behm et al., “Investigations on Laser Beam Welding Dissimilar Material Combinations of Austenitic High Manganese (FeMn) and Ferrite Steels,” Physics Procedia, vol. 56, pp. 610–619, 2014. mla: Behm, Velten, et al. “Investigations on Laser Beam Welding Dissimilar Material Combinations of Austenitic High Manganese (FeMn) and Ferrite Steels.” Physics Procedia, vol. 56, Elsevier, 2014, pp. 610–19, doi:10.1016/j.phpro.2014.08.049. short: V. Behm, M. Höfemann, A. Hatscher, A. Springer, S. Kaierle, D. Hein, M. Otto, L. Overmeyer, Physics Procedia 56 (2014) 610–619. ufg: 'Behm, Velten et. al. (2014): Investigations on Laser Beam Welding Dissimilar Material Combinations of Austenitic High Manganese (FeMn) and Ferrite Steels, in: Physics Procedia 56, S. 610–619.' van: Behm V, Höfemann M, Hatscher A, Springer A, Kaierle S, Hein D, et al. Investigations on Laser Beam Welding Dissimilar Material Combinations of Austenitic High Manganese (FeMn) and Ferrite Steels. Physics Procedia. 2014;56:610–9. date_created: 2022-04-29T16:16:14Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.1016/j.phpro.2014.08.049 extern: '1' intvolume: ' 56' language: - iso: eng page: 610-619 publication: Physics Procedia publication_identifier: issn: - 1875-3892 publication_status: published publisher: Elsevier quality_controlled: '1' status: public title: Investigations on Laser Beam Welding Dissimilar Material Combinations of Austenitic High Manganese (FeMn) and Ferrite Steels type: scientific_journal_article user_id: '79260' volume: 56 year: 2014 ... --- _id: '7861' article_number: '042005' author: - first_name: Oliver full_name: Seffer, Oliver last_name: Seffer - first_name: Rabi full_name: Lahdo, Rabi last_name: Lahdo - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle citation: ama: Seffer O, Lahdo R, Springer A, Kaierle S. Laser-GMA hybrid welding of API 5L X70 with 23 mm plate thickness using 16 kW disk laser and two GMA welding power sources. Journal of Laser Applications. 2014. doi:10.2351/1.4895638 apa: Seffer, O., Lahdo, R., Springer, A., & Kaierle, S. (2014). Laser-GMA hybrid welding of API 5L X70 with 23 mm plate thickness using 16 kW disk laser and two GMA welding power sources. Journal of Laser Applications. https://doi.org/10.2351/1.4895638 bjps: Seffer O et al. (2014) Laser-GMA Hybrid Welding of API 5L X70 with 23 Mm Plate Thickness Using 16 KW Disk Laser and Two GMA Welding Power Sources. Journal of Laser Applications. chicago: Seffer, Oliver, Rabi Lahdo, André Springer, and Stefan Kaierle. “Laser-GMA Hybrid Welding of API 5L X70 with 23 Mm Plate Thickness Using 16 KW Disk Laser and Two GMA Welding Power Sources.” Journal of Laser Applications, 2014. https://doi.org/10.2351/1.4895638. chicago-de: Seffer, Oliver, Rabi Lahdo, André Springer und Stefan Kaierle. 2014. Laser-GMA hybrid welding of API 5L X70 with 23 mm plate thickness using 16 kW disk laser and two GMA welding power sources. Journal of Laser Applications. doi:10.2351/1.4895638, . din1505-2-1: 'Seffer, Oliver ; Lahdo, Rabi ; Springer, André ; Kaierle, Stefan: Laser-GMA hybrid welding of API 5L X70 with 23 mm plate thickness using 16 kW disk laser and two GMA welding power sources. In: Journal of Laser Applications, Laser Institute of America (LIA) (2014)' havard: O. Seffer, R. Lahdo, A. Springer, S. Kaierle, Laser-GMA hybrid welding of API 5L X70 with 23 mm plate thickness using 16 kW disk laser and two GMA welding power sources, Journal of Laser Applications. (2014). ieee: O. Seffer, R. Lahdo, A. Springer, and S. Kaierle, “Laser-GMA hybrid welding of API 5L X70 with 23 mm plate thickness using 16 kW disk laser and two GMA welding power sources,” Journal of Laser Applications, 2014. mla: Seffer, Oliver, et al. “Laser-GMA Hybrid Welding of API 5L X70 with 23 Mm Plate Thickness Using 16 KW Disk Laser and Two GMA Welding Power Sources.” Journal of Laser Applications, 042005, Laser Institute of America (LIA), 2014, doi:10.2351/1.4895638. short: O. Seffer, R. Lahdo, A. Springer, S. Kaierle, Journal of Laser Applications (2014). ufg: 'Seffer, Oliver et. al. (2014): Laser-GMA hybrid welding of API 5L X70 with 23 mm plate thickness using 16 kW disk laser and two GMA welding power sources, in: Journal of Laser Applications.' van: Seffer O, Lahdo R, Springer A, Kaierle S. Laser-GMA hybrid welding of API 5L X70 with 23 mm plate thickness using 16 kW disk laser and two GMA welding power sources. Journal of Laser Applications. 2014; date_created: 2022-04-29T16:16:39Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.2351/1.4895638 extern: '1' language: - iso: eng publication: Journal of Laser Applications publication_identifier: issn: - 1042-346X - 1938-1387 publication_status: published publisher: Laser Institute of America (LIA) status: public title: Laser-GMA hybrid welding of API 5L X70 with 23 mm plate thickness using 16 kW disk laser and two GMA welding power sources type: industry_journal_article user_id: '79260' year: 2014 ... --- _id: '7862' author: - first_name: Rabi full_name: Lahdo, Rabi last_name: Lahdo - first_name: Oliver full_name: Seffer, Oliver last_name: Seffer - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle - first_name: Ludger full_name: Overmeyer, Ludger last_name: Overmeyer citation: ama: Lahdo R, Seffer O, Springer A, Kaierle S, Overmeyer L. GMA-laser Hybrid Welding of High-strength Fine-grain Structural Steel with an Inductive Preheating. Physics Procedia. 2014;56:637-645. doi:10.1016/j.phpro.2014.08.060 apa: Lahdo, R., Seffer, O., Springer, A., Kaierle, S., & Overmeyer, L. (2014). GMA-laser Hybrid Welding of High-strength Fine-grain Structural Steel with an Inductive Preheating. Physics Procedia, 56, 637–645. https://doi.org/10.1016/j.phpro.2014.08.060 bjps: Lahdo R et al. (2014) GMA-Laser Hybrid Welding of High-Strength Fine-Grain Structural Steel with an Inductive Preheating. Physics Procedia 56, 637–645. chicago: 'Lahdo, Rabi, Oliver Seffer, André Springer, Stefan Kaierle, and Ludger Overmeyer. “GMA-Laser Hybrid Welding of High-Strength Fine-Grain Structural Steel with an Inductive Preheating.” Physics Procedia 56 (2014): 637–45. https://doi.org/10.1016/j.phpro.2014.08.060.' chicago-de: 'Lahdo, Rabi, Oliver Seffer, André Springer, Stefan Kaierle und Ludger Overmeyer. 2014. GMA-laser Hybrid Welding of High-strength Fine-grain Structural Steel with an Inductive Preheating. Physics Procedia 56: 637–645. doi:10.1016/j.phpro.2014.08.060, .' din1505-2-1: 'Lahdo, Rabi ; Seffer, Oliver ; Springer, André ; Kaierle, Stefan ; Overmeyer, Ludger: GMA-laser Hybrid Welding of High-strength Fine-grain Structural Steel with an Inductive Preheating. In: Physics Procedia Bd. 56, Elsevier (2014), S. 637–645' havard: R. Lahdo, O. Seffer, A. Springer, S. Kaierle, L. Overmeyer, GMA-laser Hybrid Welding of High-strength Fine-grain Structural Steel with an Inductive Preheating, Physics Procedia. 56 (2014) 637–645. ieee: R. Lahdo, O. Seffer, A. Springer, S. Kaierle, and L. Overmeyer, “GMA-laser Hybrid Welding of High-strength Fine-grain Structural Steel with an Inductive Preheating,” Physics Procedia, vol. 56, pp. 637–645, 2014. mla: Lahdo, Rabi, et al. “GMA-Laser Hybrid Welding of High-Strength Fine-Grain Structural Steel with an Inductive Preheating.” Physics Procedia, vol. 56, Elsevier, 2014, pp. 637–45, doi:10.1016/j.phpro.2014.08.060. short: R. Lahdo, O. Seffer, A. Springer, S. Kaierle, L. Overmeyer, Physics Procedia 56 (2014) 637–645. ufg: 'Lahdo, Rabi et. al. (2014): GMA-laser Hybrid Welding of High-strength Fine-grain Structural Steel with an Inductive Preheating, in: Physics Procedia 56, S. 637–645.' van: Lahdo R, Seffer O, Springer A, Kaierle S, Overmeyer L. GMA-laser Hybrid Welding of High-strength Fine-grain Structural Steel with an Inductive Preheating. Physics Procedia. 2014;56:637–45. date_created: 2022-04-29T16:17:00Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.1016/j.phpro.2014.08.060 extern: '1' intvolume: ' 56' language: - iso: eng page: 637-645 publication: Physics Procedia publication_identifier: issn: - 1875-3892 publication_status: published publisher: Elsevier quality_controlled: '1' status: public title: GMA-laser Hybrid Welding of High-strength Fine-grain Structural Steel with an Inductive Preheating type: scientific_journal_article user_id: '79260' volume: 56 year: 2014 ... --- _id: '7872' author: - first_name: André full_name: Springer, André id: '71733' last_name: Springer citation: ama: 'Springer A. Laserstrahlschweißen der Mischverbindung Aluminium-Kupfer für thermische Solarabsorber. Vol Band 05/2014. Garbsen: PZH Verlag; 2014.' apa: 'Springer, A. (2014). Laserstrahlschweißen der Mischverbindung Aluminium-Kupfer für thermische Solarabsorber (Vol. Band 05/2014). Garbsen: PZH Verlag.' bjps: 'Springer A (2014) Laserstrahlschweißen der Mischverbindung Aluminium-Kupfer für thermische Solarabsorber. Garbsen: PZH Verlag.' chicago: 'Springer, André. Laserstrahlschweißen der Mischverbindung Aluminium-Kupfer für thermische Solarabsorber. Vol. Band 05/2014. Berichte aus dem LZH. Garbsen: PZH Verlag, 2014.' chicago-de: 'Springer, André. 2014. Laserstrahlschweißen der Mischverbindung Aluminium-Kupfer für thermische Solarabsorber. Bd. Band 05/2014. Berichte aus dem LZH. Garbsen: PZH Verlag.' din1505-2-1: 'Springer, André: Laserstrahlschweißen der Mischverbindung Aluminium-Kupfer für thermische Solarabsorber, Berichte aus dem LZH. Bd. Band 05/2014. Garbsen : PZH Verlag, 2014' havard: A. Springer, Laserstrahlschweißen der Mischverbindung Aluminium-Kupfer für thermische Solarabsorber, PZH Verlag, Garbsen, 2014. ieee: 'A. Springer, Laserstrahlschweißen der Mischverbindung Aluminium-Kupfer für thermische Solarabsorber, vol. Band 05/2014. Garbsen: PZH Verlag, 2014.' mla: Springer, André. Laserstrahlschweißen der Mischverbindung Aluminium-Kupfer für thermische Solarabsorber. Vol. Band 05/2014, PZH Verlag, 2014. short: A. Springer, Laserstrahlschweißen der Mischverbindung Aluminium-Kupfer für thermische Solarabsorber, PZH Verlag, Garbsen, 2014. ufg: 'Springer, André (2014): Laserstrahlschweißen der Mischverbindung Aluminium-Kupfer für thermische Solarabsorber (=Berichte aus dem LZH Band 05/2014), Garbsen.' van: 'Springer A. Laserstrahlschweißen der Mischverbindung Aluminium-Kupfer für thermische Solarabsorber. Garbsen: PZH Verlag; 2014. (Berichte aus dem LZH; vol. Band 05/2014).' date_created: 2022-05-02T12:56:47Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 extern: '1' language: - iso: ger place: Garbsen publication_identifier: isbn: - 978-3-944586-90-8 publication_status: published publisher: PZH Verlag series_title: Berichte aus dem LZH status: public title: Laserstrahlschweißen der Mischverbindung Aluminium-Kupfer für thermische Solarabsorber type: dissertation user_id: '79260' volume: Band 05/2014 year: 2014 ... --- _id: '7882' author: - first_name: Rabi full_name: Lahdo, Rabi last_name: Lahdo - first_name: Oliver full_name: Seffer, Oliver last_name: Seffer - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle - first_name: M. full_name: Collmann, M. last_name: Collmann - first_name: P. full_name: Schaumann, P. last_name: Schaumann - first_name: J. full_name: Neumeyer, J. last_name: Neumeyer - first_name: H. full_name: Schülbe, H. last_name: Schülbe - first_name: B. full_name: Nacke, B. last_name: Nacke citation: ama: 'Lahdo R, Seffer O, Springer A, et al. Induktionsunterstütztes MSG-Laser-Hybridschweißen zur Modifizierung der mechanisch-technologischen Eigenschaften von hochfesten Feinkornbaustählen im Dickblechbereich. Vol Band 306. Düsseldorf: DVS Media; 2014:203-209.' apa: 'Lahdo, R., Seffer, O., Springer, A., Kaierle, S., Collmann, M., Schaumann, P., … Nacke, B. (2014). Induktionsunterstütztes MSG-Laser-Hybridschweißen zur Modifizierung der mechanisch-technologischen Eigenschaften von hochfesten Feinkornbaustählen im Dickblechbereich. DVS Congress (Vol. Band 306, pp. 203–209). Düsseldorf: DVS Media.' bjps: 'Lahdo R et al. (2014) Induktionsunterstütztes MSG-Laser-Hybridschweißen zur Modifizierung der mechanisch-technologischen Eigenschaften von hochfesten Feinkornbaustählen im Dickblechbereich. Düsseldorf: DVS Media.' chicago: 'Lahdo, Rabi, Oliver Seffer, André Springer, Stefan Kaierle, M. Collmann, P. Schaumann, J. Neumeyer, H. Schülbe, and B. Nacke. Induktionsunterstütztes MSG-Laser-Hybridschweißen zur Modifizierung der mechanisch-technologischen Eigenschaften von hochfesten Feinkornbaustählen im Dickblechbereich. DVS Congress. Vol. Band 306. DVS-Berichte. Düsseldorf: DVS Media, 2014.' chicago-de: 'Lahdo, Rabi, Oliver Seffer, André Springer, Stefan Kaierle, M. Collmann, P. Schaumann, J. Neumeyer, H. Schülbe und B. Nacke. 2014. Induktionsunterstütztes MSG-Laser-Hybridschweißen zur Modifizierung der mechanisch-technologischen Eigenschaften von hochfesten Feinkornbaustählen im Dickblechbereich. DVS Congress. Bd. Band 306. DVS-Berichte. Düsseldorf: DVS Media.' din1505-2-1: 'Lahdo, Rabi ; Seffer, Oliver ; Springer, André ; Kaierle, Stefan ; Collmann, M. ; Schaumann, P. ; Neumeyer, J. ; Schülbe, H. ; u. a.: Induktionsunterstütztes MSG-Laser-Hybridschweißen zur Modifizierung der mechanisch-technologischen Eigenschaften von hochfesten Feinkornbaustählen im Dickblechbereich, DVS-Berichte. Bd. Band 306. Düsseldorf : DVS Media, 2014' havard: R. Lahdo, O. Seffer, A. Springer, S. Kaierle, M. Collmann, P. Schaumann, J. Neumeyer, H. Schülbe, B. Nacke, Induktionsunterstütztes MSG-Laser-Hybridschweißen zur Modifizierung der mechanisch-technologischen Eigenschaften von hochfesten Feinkornbaustählen im Dickblechbereich, DVS Media, Düsseldorf, 2014. ieee: 'R. Lahdo et al., Induktionsunterstütztes MSG-Laser-Hybridschweißen zur Modifizierung der mechanisch-technologischen Eigenschaften von hochfesten Feinkornbaustählen im Dickblechbereich, vol. Band 306. Düsseldorf: DVS Media, 2014, pp. 203–209.' mla: Lahdo, Rabi, et al. “Induktionsunterstütztes MSG-Laser-Hybridschweißen zur Modifizierung der mechanisch-technologischen Eigenschaften von hochfesten Feinkornbaustählen im Dickblechbereich.” DVS Congress, vol. Band 306, DVS Media, 2014, pp. 203–09. short: R. Lahdo, O. Seffer, A. Springer, S. Kaierle, M. Collmann, P. Schaumann, J. Neumeyer, H. Schülbe, B. Nacke, Induktionsunterstütztes MSG-Laser-Hybridschweißen zur Modifizierung der mechanisch-technologischen Eigenschaften von hochfesten Feinkornbaustählen im Dickblechbereich, DVS Media, Düsseldorf, 2014. ufg: 'Lahdo, Rabi et. al. (2014): Induktionsunterstütztes MSG-Laser-Hybridschweißen zur Modifizierung der mechanisch-technologischen Eigenschaften von hochfesten Feinkornbaustählen im Dickblechbereich (=DVS-Berichte Band 306), Düsseldorf.' van: 'Lahdo R, Seffer O, Springer A, Kaierle S, Collmann M, Schaumann P, et al. Induktionsunterstütztes MSG-Laser-Hybridschweißen zur Modifizierung der mechanisch-technologischen Eigenschaften von hochfesten Feinkornbaustählen im Dickblechbereich. DVS Congress. Düsseldorf: DVS Media; 2014. (DVS-Berichte; vol. Band 306).' conference: end_date: 2014-09-16 location: Berlin name: DSV Congress start_date: 2014-09-15 date_created: 2022-05-02T13:48:59Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 extern: '1' language: - iso: ger page: 203-209 place: Düsseldorf publication: DVS Congress publication_identifier: isbn: - 978-3-945023-03-7 publication_status: published publisher: DVS Media related_material: link: - relation: table_of_contents url: https://d-nb.info/105813289x/04 series_title: DVS-Berichte status: public title: Induktionsunterstütztes MSG-Laser-Hybridschweißen zur Modifizierung der mechanisch-technologischen Eigenschaften von hochfesten Feinkornbaustählen im Dickblechbereich type: conference_editor_article user_id: '79260' volume: Band 306 year: 2014 ... --- _id: '7863' author: - first_name: Mitja full_name: Schimek, Mitja last_name: Schimek - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Ronny full_name: Pfeifer, Ronny last_name: Pfeifer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle citation: ama: Schimek M, Springer A, Pfeifer R, Kaierle S. Laser Welding of Dissimilar Materials for Lightweight Construction and Special Applications. (Dorsch F, ed.). SPIE; 2013. doi:10.1117/12.2006335 apa: 'Schimek, M., Springer, A., Pfeifer, R., & Kaierle, S. (2013). Laser welding of dissimilar materials for lightweight construction and special applications. (F. Dorsch, Ed.), SPIE Proceedings. San Francisco, California, United States: SPIE. https://doi.org/10.1117/12.2006335' bjps: Schimek M et al. (2013) Laser Welding of Dissimilar Materials for Lightweight Construction and Special Applications, Dorsch F (ed.). SPIE. chicago: Schimek, Mitja, André Springer, Ronny Pfeifer, and Stefan Kaierle. Laser Welding of Dissimilar Materials for Lightweight Construction and Special Applications. Edited by Friedhelm Dorsch. SPIE Proceedings. SPIE, 2013. https://doi.org/10.1117/12.2006335. chicago-de: Schimek, Mitja, André Springer, Ronny Pfeifer und Stefan Kaierle. 2013. Laser welding of dissimilar materials for lightweight construction and special applications. Hg. von Friedhelm Dorsch. SPIE Proceedings. SPIE. doi:10.1117/12.2006335, . din1505-2-1: 'Schimek, Mitja ; Springer, André ; Pfeifer, Ronny ; Kaierle, Stefan ; Dorsch, F. (Hrsg.): Laser welding of dissimilar materials for lightweight construction and special applications : SPIE, 2013' havard: M. Schimek, A. Springer, R. Pfeifer, S. Kaierle, Laser welding of dissimilar materials for lightweight construction and special applications, SPIE, 2013. ieee: M. Schimek, A. Springer, R. Pfeifer, and S. Kaierle, Laser welding of dissimilar materials for lightweight construction and special applications. SPIE, 2013. mla: Schimek, Mitja, et al. “Laser Welding of Dissimilar Materials for Lightweight Construction and Special Applications.” SPIE Proceedings, edited by Friedhelm Dorsch, SPIE, 2013, doi:10.1117/12.2006335. short: M. Schimek, A. Springer, R. Pfeifer, S. Kaierle, Laser Welding of Dissimilar Materials for Lightweight Construction and Special Applications, SPIE, 2013. ufg: 'Schimek, Mitja et. al. (2013): Laser welding of dissimilar materials for lightweight construction and special applications.' van: Schimek M, Springer A, Pfeifer R, Kaierle S. Laser welding of dissimilar materials for lightweight construction and special applications. Dorsch F, editor. SPIE Proceedings. SPIE; 2013. conference: location: San Francisco, California, United States name: SPIE LASE date_created: 2022-04-29T16:17:36Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.1117/12.2006335 editor: - first_name: Friedhelm full_name: Dorsch, Friedhelm last_name: Dorsch extern: '1' language: - iso: eng publication: SPIE Proceedings publication_identifier: issn: - 0277-786X publication_status: published publisher: SPIE status: public title: Laser welding of dissimilar materials for lightweight construction and special applications type: conference_editor_article user_id: '79260' year: 2013 ... --- _id: '7881' author: - first_name: Oliver full_name: Seffer, Oliver last_name: Seffer - first_name: Rabi full_name: Lahdo, Rabi last_name: Lahdo - first_name: Friedrich full_name: Schneider, Friedrich last_name: Schneider - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle citation: ama: Seffer O, Lahdo R, Schneider F, Springer A, Kaierle S. Laser MIG Welding Process Combination for Thick Wall Applications of the Aluminum Alloy EN AW 6082 T6. 6th International Congress on Laser Advanced Materials Processing (LAMP); 2013. apa: 'Seffer, O., Lahdo, R., Schneider, F., Springer, A., & Kaierle, S. (2013). Laser MIG Welding Process Combination for Thick Wall Applications of the Aluminum Alloy EN AW 6082 T6. Proceedings of the 6th International Congress on Laser Advanced Materials Processing (LAMP). Niigata, Japan: 6th International Congress on Laser Advanced Materials Processing (LAMP).' bjps: Seffer O et al. (2013) Laser MIG Welding Process Combination for Thick Wall Applications of the Aluminum Alloy EN AW 6082 T6. 6th International Congress on Laser Advanced Materials Processing (LAMP). chicago: Seffer, Oliver, Rabi Lahdo, Friedrich Schneider, André Springer, and Stefan Kaierle. Laser MIG Welding Process Combination for Thick Wall Applications of the Aluminum Alloy EN AW 6082 T6. Proceedings of the 6th International Congress on Laser Advanced Materials Processing (LAMP). 6th International Congress on Laser Advanced Materials Processing (LAMP), 2013. chicago-de: Seffer, Oliver, Rabi Lahdo, Friedrich Schneider, André Springer und Stefan Kaierle. 2013. Laser MIG Welding Process Combination for Thick Wall Applications of the Aluminum Alloy EN AW 6082 T6. Proceedings of the 6th International Congress on Laser Advanced Materials Processing (LAMP). 6th International Congress on Laser Advanced Materials Processing (LAMP). din1505-2-1: 'Seffer, Oliver ; Lahdo, Rabi ; Schneider, Friedrich ; Springer, André ; Kaierle, Stefan: Laser MIG Welding Process Combination for Thick Wall Applications of the Aluminum Alloy EN AW 6082 T6 : 6th International Congress on Laser Advanced Materials Processing (LAMP), 2013' havard: O. Seffer, R. Lahdo, F. Schneider, A. Springer, S. Kaierle, Laser MIG Welding Process Combination for Thick Wall Applications of the Aluminum Alloy EN AW 6082 T6, 6th International Congress on Laser Advanced Materials Processing (LAMP), 2013. ieee: O. Seffer, R. Lahdo, F. Schneider, A. Springer, and S. Kaierle, Laser MIG Welding Process Combination for Thick Wall Applications of the Aluminum Alloy EN AW 6082 T6. 6th International Congress on Laser Advanced Materials Processing (LAMP), 2013. mla: Seffer, Oliver, et al. “Laser MIG Welding Process Combination for Thick Wall Applications of the Aluminum Alloy EN AW 6082 T6.” Proceedings of the 6th International Congress on Laser Advanced Materials Processing (LAMP), 6th International Congress on Laser Advanced Materials Processing (LAMP), 2013. short: O. Seffer, R. Lahdo, F. Schneider, A. Springer, S. Kaierle, Laser MIG Welding Process Combination for Thick Wall Applications of the Aluminum Alloy EN AW 6082 T6, 6th International Congress on Laser Advanced Materials Processing (LAMP), 2013. ufg: 'Seffer, Oliver et. al. (2013): Laser MIG Welding Process Combination for Thick Wall Applications of the Aluminum Alloy EN AW 6082 T6.' van: Seffer O, Lahdo R, Schneider F, Springer A, Kaierle S. Laser MIG Welding Process Combination for Thick Wall Applications of the Aluminum Alloy EN AW 6082 T6. Proceedings of the 6th International Congress on Laser Advanced Materials Processing (LAMP). 6th International Congress on Laser Advanced Materials Processing (LAMP); 2013. conference: end_date: 2013-07-26 location: Niigata, Japan name: 6th International Congress on Laser Advanced Materials Processing (LAMP) start_date: 2013-07-23 date_created: 2022-05-02T13:41:17Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 extern: '1' language: - iso: eng publication: Proceedings of the 6th International Congress on Laser Advanced Materials Processing (LAMP) publication_status: published publisher: 6th International Congress on Laser Advanced Materials Processing (LAMP) status: public title: Laser MIG Welding Process Combination for Thick Wall Applications of the Aluminum Alloy EN AW 6082 T6 type: conference_editor_article user_id: '79260' year: 2013 ... --- _id: '7864' author: - first_name: Mitja full_name: Schimek, Mitja last_name: Schimek - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Stefan full_name: Kaierle, Stefan last_name: Kaierle - first_name: Dietmar full_name: Kracht, Dietmar last_name: Kracht - first_name: Volker full_name: Wesling, Volker last_name: Wesling citation: ama: Schimek M, Springer A, Kaierle S, Kracht D, Wesling V. Laser-welded Dissimilar Steel-aluminum Seams for Automotive Lightweight Construction. Physics Procedia. 2012;39:43-50. doi:10.1016/j.phpro.2012.10.012 apa: Schimek, M., Springer, A., Kaierle, S., Kracht, D., & Wesling, V. (2012). Laser-welded Dissimilar Steel-aluminum Seams for Automotive Lightweight Construction. Physics Procedia, 39, 43–50. https://doi.org/10.1016/j.phpro.2012.10.012 bjps: Schimek M et al. (2012) Laser-Welded Dissimilar Steel-Aluminum Seams for Automotive Lightweight Construction. Physics Procedia 39, 43–50. chicago: 'Schimek, Mitja, André Springer, Stefan Kaierle, Dietmar Kracht, and Volker Wesling. “Laser-Welded Dissimilar Steel-Aluminum Seams for Automotive Lightweight Construction.” Physics Procedia 39 (2012): 43–50. https://doi.org/10.1016/j.phpro.2012.10.012.' chicago-de: 'Schimek, Mitja, André Springer, Stefan Kaierle, Dietmar Kracht und Volker Wesling. 2012. Laser-welded Dissimilar Steel-aluminum Seams for Automotive Lightweight Construction. Physics Procedia 39: 43–50. doi:10.1016/j.phpro.2012.10.012, .' din1505-2-1: 'Schimek, Mitja ; Springer, André ; Kaierle, Stefan ; Kracht, Dietmar ; Wesling, Volker: Laser-welded Dissimilar Steel-aluminum Seams for Automotive Lightweight Construction. In: Physics Procedia Bd. 39, Elsevier (2012), S. 43–50' havard: M. Schimek, A. Springer, S. Kaierle, D. Kracht, V. Wesling, Laser-welded Dissimilar Steel-aluminum Seams for Automotive Lightweight Construction, Physics Procedia. 39 (2012) 43–50. ieee: M. Schimek, A. Springer, S. Kaierle, D. Kracht, and V. Wesling, “Laser-welded Dissimilar Steel-aluminum Seams for Automotive Lightweight Construction,” Physics Procedia, vol. 39, pp. 43–50, 2012. mla: Schimek, Mitja, et al. “Laser-Welded Dissimilar Steel-Aluminum Seams for Automotive Lightweight Construction.” Physics Procedia, vol. 39, Elsevier, 2012, pp. 43–50, doi:10.1016/j.phpro.2012.10.012. short: M. Schimek, A. Springer, S. Kaierle, D. Kracht, V. Wesling, Physics Procedia 39 (2012) 43–50. ufg: 'Schimek, Mitja et. al. (2012): Laser-welded Dissimilar Steel-aluminum Seams for Automotive Lightweight Construction, in: Physics Procedia 39, S. 43–50.' van: Schimek M, Springer A, Kaierle S, Kracht D, Wesling V. Laser-welded Dissimilar Steel-aluminum Seams for Automotive Lightweight Construction. Physics Procedia. 2012;39:43–50. date_created: 2022-04-29T16:18:04Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.1016/j.phpro.2012.10.012 extern: '1' intvolume: ' 39' language: - iso: eng main_file_link: - open_access: '1' oa: '1' page: 43-50 publication: Physics Procedia publication_identifier: issn: - 1875-3892 publication_status: published publisher: Elsevier quality_controlled: '1' status: public title: Laser-welded Dissimilar Steel-aluminum Seams for Automotive Lightweight Construction type: scientific_journal_article user_id: '79260' volume: 39 year: 2012 ... --- _id: '7865' article_number: '052002' author: - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Peter full_name: Kallage, Peter last_name: Kallage - first_name: Michael full_name: Hustedt, Michael last_name: Hustedt - first_name: Stephan full_name: Barcikowski, Stephan last_name: Barcikowski - first_name: Volker full_name: Wesling, Volker last_name: Wesling - first_name: Heinz full_name: Haferkamp, Heinz last_name: Haferkamp citation: ama: Springer A, Kallage P, Hustedt M, Barcikowski S, Wesling V, Haferkamp H. Development of new processes for welding of thermal Al–Cu solar absorbers using diode lasers. Journal of Laser Applications. 2012. doi:10.2351/1.4736588 apa: Springer, A., Kallage, P., Hustedt, M., Barcikowski, S., Wesling, V., & Haferkamp, H. (2012). Development of new processes for welding of thermal Al–Cu solar absorbers using diode lasers. Journal of Laser Applications. https://doi.org/10.2351/1.4736588 bjps: Springer A et al. (2012) Development of New Processes for Welding of Thermal Al–Cu Solar Absorbers Using Diode Lasers. Journal of Laser Applications. chicago: Springer, André, Peter Kallage, Michael Hustedt, Stephan Barcikowski, Volker Wesling, and Heinz Haferkamp. “Development of New Processes for Welding of Thermal Al–Cu Solar Absorbers Using Diode Lasers.” Journal of Laser Applications, 2012. https://doi.org/10.2351/1.4736588. chicago-de: Springer, André, Peter Kallage, Michael Hustedt, Stephan Barcikowski, Volker Wesling und Heinz Haferkamp. 2012. Development of new processes for welding of thermal Al–Cu solar absorbers using diode lasers. Journal of Laser Applications. doi:10.2351/1.4736588, . din1505-2-1: 'Springer, André ; Kallage, Peter ; Hustedt, Michael ; Barcikowski, Stephan ; Wesling, Volker ; Haferkamp, Heinz: Development of new processes for welding of thermal Al–Cu solar absorbers using diode lasers. In: Journal of Laser Applications, Laser Institute of America (LIA) (2012)' havard: A. Springer, P. Kallage, M. Hustedt, S. Barcikowski, V. Wesling, H. Haferkamp, Development of new processes for welding of thermal Al–Cu solar absorbers using diode lasers, Journal of Laser Applications. (2012). ieee: A. Springer, P. Kallage, M. Hustedt, S. Barcikowski, V. Wesling, and H. Haferkamp, “Development of new processes for welding of thermal Al–Cu solar absorbers using diode lasers,” Journal of Laser Applications, 2012. mla: Springer, André, et al. “Development of New Processes for Welding of Thermal Al–Cu Solar Absorbers Using Diode Lasers.” Journal of Laser Applications, 052002, Laser Institute of America (LIA), 2012, doi:10.2351/1.4736588. short: A. Springer, P. Kallage, M. Hustedt, S. Barcikowski, V. Wesling, H. Haferkamp, Journal of Laser Applications (2012). ufg: 'Springer, André et. al. (2012): Development of new processes for welding of thermal Al–Cu solar absorbers using diode lasers, in: Journal of Laser Applications.' van: Springer A, Kallage P, Hustedt M, Barcikowski S, Wesling V, Haferkamp H. Development of new processes for welding of thermal Al–Cu solar absorbers using diode lasers. Journal of Laser Applications. 2012; date_created: 2022-04-29T16:18:45Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.2351/1.4736588 extern: '1' language: - iso: eng publication: Journal of Laser Applications publication_identifier: issn: - 1042-346X - 1938-1387 publication_status: published publisher: Laser Institute of America (LIA) status: public title: Development of new processes for welding of thermal Al–Cu solar absorbers using diode lasers type: industry_journal_article user_id: '79260' year: 2012 ... --- _id: '7877' author: - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Michael full_name: Hustedt, Michael last_name: Hustedt - first_name: Volker full_name: Wesling, Volker last_name: Wesling - first_name: Heinz full_name: Haferkamp, Heinz last_name: Haferkamp citation: ama: 'Springer A, Hustedt M, Wesling V, Haferkamp H. Schweißen von Al-Cu Solarabsorbern mittels Diodenlaserstrahlung. (Vajen K, Ostbayerisches Technologie-Transfer-Institut. Bereich Erneuerbare Energien, eds.). Regensburg: OTTI; 2012.' apa: 'Springer, A., Hustedt, M., Wesling, V., & Haferkamp, H. (2012). Schweißen von Al-Cu Solarabsorbern mittels Diodenlaserstrahlung. (K. Vajen & Ostbayerisches Technologie-Transfer-Institut. Bereich Erneuerbare Energien, Eds.), 22. Symposium Thermische Solarenergie. Regensburg: OTTI.' bjps: 'Springer A et al. (2012) Schweißen von Al-Cu Solarabsorbern mittels Diodenlaserstrahlung, Vajen K and Ostbayerisches Technologie-Transfer-Institut. Bereich Erneuerbare Energien (eds). Regensburg: OTTI.' chicago: 'Springer, André, Michael Hustedt, Volker Wesling, and Heinz Haferkamp. Schweißen von Al-Cu Solarabsorbern mittels Diodenlaserstrahlung. Edited by Klaus Vajen and Ostbayerisches Technologie-Transfer-Institut. Bereich Erneuerbare Energien. 22. Symposium Thermische Solarenergie. Regensburg: OTTI, 2012.' chicago-de: 'Springer, André, Michael Hustedt, Volker Wesling und Heinz Haferkamp. 2012. Schweißen von Al-Cu Solarabsorbern mittels Diodenlaserstrahlung. Hg. von Klaus Vajen und Ostbayerisches Technologie-Transfer-Institut. Bereich Erneuerbare Energien. 22. Symposium Thermische Solarenergie. Regensburg: OTTI.' din1505-2-1: 'Springer, André ; Hustedt, Michael ; Wesling, Volker ; Haferkamp, Heinz ; Vajen, K. ; Ostbayerisches Technologie-Transfer-Institut. Bereich Erneuerbare Energien (Hrsg.): Schweißen von Al-Cu Solarabsorbern mittels Diodenlaserstrahlung. Regensburg : OTTI, 2012' havard: A. Springer, M. Hustedt, V. Wesling, H. Haferkamp, Schweißen von Al-Cu Solarabsorbern mittels Diodenlaserstrahlung, OTTI, Regensburg, 2012. ieee: 'A. Springer, M. Hustedt, V. Wesling, and H. Haferkamp, Schweißen von Al-Cu Solarabsorbern mittels Diodenlaserstrahlung. Regensburg: OTTI, 2012.' mla: Springer, André, et al. “Schweißen von Al-Cu Solarabsorbern mittels Diodenlaserstrahlung.” 22. Symposium Thermische Solarenergie, edited by Klaus Vajen and Ostbayerisches Technologie-Transfer-Institut. Bereich Erneuerbare Energien, OTTI, 2012. short: A. Springer, M. Hustedt, V. Wesling, H. Haferkamp, Schweißen von Al-Cu Solarabsorbern mittels Diodenlaserstrahlung, OTTI, Regensburg, 2012. ufg: 'Springer, André et. al. (2012): Schweißen von Al-Cu Solarabsorbern mittels Diodenlaserstrahlung, Regensburg.' van: 'Springer A, Hustedt M, Wesling V, Haferkamp H. Schweißen von Al-Cu Solarabsorbern mittels Diodenlaserstrahlung. Vajen K, Ostbayerisches Technologie-Transfer-Institut. Bereich Erneuerbare Energien, editors. 22. Symposium Thermische Solarenergie. Regensburg: OTTI; 2012.' conference: end_date: 2012-05-11 location: Bad Staffelstein name: 22. Symposium Thermische Solarenergie start_date: 2012-05-09 corporate_editor: - Ostbayerisches Technologie-Transfer-Institut. Bereich Erneuerbare Energien date_created: 2022-05-02T13:05:44Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 editor: - first_name: Klaus full_name: Vajen, Klaus last_name: Vajen extern: '1' language: - iso: ger place: Regensburg publication: 22. Symposium Thermische Solarenergie publication_identifier: isbn: - 978-3-941785-89-2 publication_status: published publisher: OTTI related_material: link: - relation: table_of_contents url: https://d-nb.info/1022340336/04 status: public title: Schweißen von Al-Cu Solarabsorbern mittels Diodenlaserstrahlung type: conference_editor_article user_id: '79260' year: 2012 ... --- _id: '7874' author: - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Michael full_name: Hustedt, Michael last_name: Hustedt citation: ama: Springer A, Hustedt M. Schweißen von Solarabsorbern mit Diodenlasern. Laser Magazin. 2011;28(2):10-12. apa: Springer, A., & Hustedt, M. (2011). Schweißen von Solarabsorbern mit Diodenlasern. Laser Magazin, 28(2), 10–12. bjps: Springer A and Hustedt M (2011) Schweißen von Solarabsorbern mit Diodenlasern. Laser Magazin 28, 10–12. chicago: 'Springer, André, and Michael Hustedt. “Schweißen von Solarabsorbern mit Diodenlasern.” Laser Magazin 28, no. 2 (2011): 10–12.' chicago-de: 'Springer, André und Michael Hustedt. 2011. Schweißen von Solarabsorbern mit Diodenlasern. Laser Magazin 28, Nr. 2: 10–12.' din1505-2-1: 'Springer, André ; Hustedt, Michael: Schweißen von Solarabsorbern mit Diodenlasern. In: Laser Magazin Bd. 28. Bad Nenndorf, Hightech Publications (2011), Nr. 2, S. 10–12' havard: A. Springer, M. Hustedt, Schweißen von Solarabsorbern mit Diodenlasern, Laser Magazin. 28 (2011) 10–12. ieee: A. Springer and M. Hustedt, “Schweißen von Solarabsorbern mit Diodenlasern,” Laser Magazin, vol. 28, no. 2, pp. 10–12, 2011. mla: Springer, André, and Michael Hustedt. “Schweißen von Solarabsorbern mit Diodenlasern.” Laser Magazin, vol. 28, no. 2, Hightech Publications, 2011, pp. 10–12. short: A. Springer, M. Hustedt, Laser Magazin 28 (2011) 10–12. ufg: 'Springer, André/Hustedt, Michael (2011): Schweißen von Solarabsorbern mit Diodenlasern, in: Laser Magazin 28 (2), S. 10–12.' van: Springer A, Hustedt M. Schweißen von Solarabsorbern mit Diodenlasern. Laser Magazin. 2011;28(2):10–2. date_created: 2022-05-02T13:01:12Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 extern: '1' intvolume: ' 28' issue: '2' language: - iso: ger page: 10-12 place: Bad Nenndorf publication: Laser Magazin publication_identifier: issn: - 0945-8875 publication_status: published publisher: Hightech Publications status: public title: Schweißen von Solarabsorbern mit Diodenlasern type: industry_journal_article user_id: '79260' volume: 28 year: 2011 ... --- _id: '7878' author: - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Peter full_name: Kallage, Peter last_name: Kallage - first_name: Stephan full_name: Barcikowski, Stephan last_name: Barcikowski - first_name: Heinz full_name: Haferkamp, Heinz last_name: Haferkamp citation: ama: 'Springer A, Kallage P, Barcikowski S, Haferkamp H. Copper-Aluminium Absorbers: How to Weld Using Diode Lasers. 1st Solar Thermal Materials, Equipment and Technology Conference (SMEThermal); 2011.' apa: 'Springer, A., Kallage, P., Barcikowski, S., & Haferkamp, H. (2011). Copper-aluminium absorbers: how to weld using diode lasers. Presented at the 1st Solar Thermal Materials, Equipment and Technology Conference (SMEThermal), Berlin: 1st Solar Thermal Materials, Equipment and Technology Conference (SMEThermal).' bjps: 'Springer A et al. (2011) Copper-Aluminium Absorbers: How to Weld Using Diode Lasers. 1st Solar Thermal Materials, Equipment and Technology Conference (SMEThermal).' chicago: 'Springer, André, Peter Kallage, Stephan Barcikowski, and Heinz Haferkamp. Copper-Aluminium Absorbers: How to Weld Using Diode Lasers. 1st Solar Thermal Materials, Equipment and Technology Conference (SMEThermal), 2011.' chicago-de: 'Springer, André, Peter Kallage, Stephan Barcikowski und Heinz Haferkamp. 2011. Copper-aluminium absorbers: how to weld using diode lasers. 1st Solar Thermal Materials, Equipment and Technology Conference (SMEThermal).' din1505-2-1: 'Springer, André ; Kallage, Peter ; Barcikowski, Stephan ; Haferkamp, Heinz: Copper-aluminium absorbers: how to weld using diode lasers : 1st Solar Thermal Materials, Equipment and Technology Conference (SMEThermal), 2011' havard: 'A. Springer, P. Kallage, S. Barcikowski, H. Haferkamp, Copper-aluminium absorbers: how to weld using diode lasers, 1st Solar Thermal Materials, Equipment and Technology Conference (SMEThermal), 2011.' ieee: 'A. Springer, P. Kallage, S. Barcikowski, and H. Haferkamp, Copper-aluminium absorbers: how to weld using diode lasers. 1st Solar Thermal Materials, Equipment and Technology Conference (SMEThermal), 2011.' mla: 'Springer, André, et al. Copper-Aluminium Absorbers: How to Weld Using Diode Lasers. 1st Solar Thermal Materials, Equipment and Technology Conference (SMEThermal), 2011.' short: 'A. Springer, P. Kallage, S. Barcikowski, H. Haferkamp, Copper-Aluminium Absorbers: How to Weld Using Diode Lasers, 1st Solar Thermal Materials, Equipment and Technology Conference (SMEThermal), 2011.' ufg: 'Springer, André et. al. (2011): Copper-aluminium absorbers: how to weld using diode lasers.' van: 'Springer A, Kallage P, Barcikowski S, Haferkamp H. Copper-aluminium absorbers: how to weld using diode lasers. 1st Solar Thermal Materials, Equipment and Technology Conference (SMEThermal); 2011.' conference: location: Berlin name: 1st Solar Thermal Materials, Equipment and Technology Conference (SMEThermal) start_date: 2010-03-04 date_created: 2022-05-02T13:38:34Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 extern: '1' language: - iso: eng publisher: 1st Solar Thermal Materials, Equipment and Technology Conference (SMEThermal) status: public title: 'Copper-aluminium absorbers: how to weld using diode lasers' type: conference_speech user_id: '79260' year: 2011 ... --- _id: '7866' author: - first_name: Ralph J. full_name: Hellmig, Ralph J. last_name: Hellmig - first_name: Miloš full_name: Janecek, Miloš last_name: Janecek - first_name: Branislav full_name: Hadzima, Branislav last_name: Hadzima - first_name: Oleg V. full_name: Gendelman, Oleg V. last_name: Gendelman - first_name: Michael full_name: Shapiro, Michael last_name: Shapiro - first_name: Xenia full_name: Molodova, Xenia last_name: Molodova - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Yuri full_name: Estrin, Yuri last_name: Estrin citation: ama: Hellmig RJ, Janecek M, Hadzima B, et al. A Portrait of Copper Processed by Equal Channel Angular Pressing. MATERIALS TRANSACTIONS. 2007;49(1):31-37. doi:10.2320/matertrans.me200717 apa: Hellmig, R. J., Janecek, M., Hadzima, B., Gendelman, O. V., Shapiro, M., Molodova, X., … Estrin, Y. (2007). A Portrait of Copper Processed by Equal Channel Angular Pressing. MATERIALS TRANSACTIONS, 49(1), 31–37. https://doi.org/10.2320/matertrans.me200717 bjps: Hellmig RJ et al. (2007) A Portrait of Copper Processed by Equal Channel Angular Pressing. MATERIALS TRANSACTIONS 49, 31–37. chicago: 'Hellmig, Ralph J., Miloš Janecek, Branislav Hadzima, Oleg V. Gendelman, Michael Shapiro, Xenia Molodova, André Springer, and Yuri Estrin. “A Portrait of Copper Processed by Equal Channel Angular Pressing.” MATERIALS TRANSACTIONS 49, no. 1 (2007): 31–37. https://doi.org/10.2320/matertrans.me200717.' chicago-de: 'Hellmig, Ralph J., Miloš Janecek, Branislav Hadzima, Oleg V. Gendelman, Michael Shapiro, Xenia Molodova, André Springer und Yuri Estrin. 2007. A Portrait of Copper Processed by Equal Channel Angular Pressing. MATERIALS TRANSACTIONS 49, Nr. 1: 31–37. doi:10.2320/matertrans.me200717, .' din1505-2-1: 'Hellmig, Ralph J. ; Janecek, Miloš ; Hadzima, Branislav ; Gendelman, Oleg V. ; Shapiro, Michael ; Molodova, Xenia ; Springer, André ; Estrin, Yuri: A Portrait of Copper Processed by Equal Channel Angular Pressing. In: MATERIALS TRANSACTIONS Bd. 49, The Japan Institute of Metals and Materials (2007), Nr. 1, S. 31–37' havard: R.J. Hellmig, M. Janecek, B. Hadzima, O.V. Gendelman, M. Shapiro, X. Molodova, A. Springer, Y. Estrin, A Portrait of Copper Processed by Equal Channel Angular Pressing, MATERIALS TRANSACTIONS. 49 (2007) 31–37. ieee: R. J. Hellmig et al., “A Portrait of Copper Processed by Equal Channel Angular Pressing,” MATERIALS TRANSACTIONS, vol. 49, no. 1, pp. 31–37, 2007. mla: Hellmig, Ralph J., et al. “A Portrait of Copper Processed by Equal Channel Angular Pressing.” MATERIALS TRANSACTIONS, vol. 49, no. 1, The Japan Institute of Metals and Materials, 2007, pp. 31–37, doi:10.2320/matertrans.me200717. short: R.J. Hellmig, M. Janecek, B. Hadzima, O.V. Gendelman, M. Shapiro, X. Molodova, A. Springer, Y. Estrin, MATERIALS TRANSACTIONS 49 (2007) 31–37. ufg: 'Hellmig, Ralph J. et. al. (2007): A Portrait of Copper Processed by Equal Channel Angular Pressing, in: MATERIALS TRANSACTIONS 49 (1), S. 31–37.' van: Hellmig RJ, Janecek M, Hadzima B, Gendelman OV, Shapiro M, Molodova X, et al. A Portrait of Copper Processed by Equal Channel Angular Pressing. MATERIALS TRANSACTIONS. 2007;49(1):31–7. date_created: 2022-04-29T16:19:15Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP7037 doi: 10.2320/matertrans.me200717 extern: '1' intvolume: ' 49' issue: '1' language: - iso: eng main_file_link: - open_access: '1' url: https://www.jstage.jst.go.jp/article/matertrans/49/1/49_ME200717/_article oa: '1' page: 31-37 publication: MATERIALS TRANSACTIONS publication_identifier: issn: - 1345-9678 - 1347-5320 publication_status: published publisher: The Japan Institute of Metals and Materials quality_controlled: '1' status: public title: A Portrait of Copper Processed by Equal Channel Angular Pressing type: scientific_journal_article user_id: '79260' volume: 49 year: 2007 ...