@misc{3720, author = {{Austermann-Haun, Ute and Meier, J. F.}}, publisher = {{Auftraggeber: Fa. Solarinstitut & Solarinvest GmbH}}, title = {{{Erfassung der Sickerwasserzusammen¬setzung der Deponie Schmedissen sowie der Nitrifikations- und Denitrifikationstests}}}, year = {{2015}}, } @misc{3722, author = {{Waermer, F. and Radeck, T. and Austermann-Haun, Ute and Meier, J. F.}}, publisher = {{Stadt Bad Driburg}}, title = {{{Elimination von Mikroschadstoffen auf der Kläranlage Bad Driburg-Herste}}}, year = {{2015}}, } @misc{3725, author = {{Austermann-Haun, Ute and Meier, J. F.}}, publisher = {{Auftraggeber: Herforder Abwasser GmbH}}, title = {{{Bericht über die durchgeführte Analytik zum Projekt „Elimination von Mikroschadstoffen auf der Kläranlage Herford durch Pulveraktivkohle - Testphase 2015“}}}, year = {{2015}}, } @misc{386, abstract = {{Die vorliegende Masterarbeit beschäftigt sich mit den Schulungsangeboten der Hochschulbibliothek der Hochschule für Technik, Wirtschaft und Kultur Leipzig. Die Bedürfnisse der Studierenden stehen hierbei im Vordergrund. Um die hierfür benötigen Daten zu gewinnen, wurde eine quantitative Online-Befragung von ausgewählten Bachelorstudiengängen durchgeführt. Parallel hierzu fand eine qualitative Befragung der entsprechenden Studiendekane statt. Die Auswertung der Online-Befragung der Studierenden erfolgte dabei unter der Berücksichtigung fachspezifischer Aspekte. Die darauf aufbauenden Handlungsempfehlungen bilden den Schlussteil dieser Arbeit ab.}}, author = {{Arndt, Nils}}, pages = {{272}}, publisher = {{Hochschule für Technik, Wirtschaft und Kultur Leipzig}}, title = {{{Ermittlung der Bedarfe und Erstellung von Handlungsempfehlungen für die Weiterentwicklung der Schulungsangebote an der Hochschulbibliothek der Hochschule für Technik, Wirtschaft und Kultur Leipzig}}}, doi = {{10.25644/0a9j-hr52}}, year = {{2015}}, } @article{4012, abstract = {{Hybrid electric powertrains are developed for reducing the fuel consumption and consequently the emission of carbon dioxide. The fuel consumption of those systems depends significantly on the topology of the powertrain and the applied control strategy. For testing and improving the control strategy in terms of the overall system efficiency, Hardware-in-the-Loop (HIL) simulation can be applied. In order to operate the corresponding electronic control units in a virtual environment, it emulates the behavior of the actuator and sensor signals by a real-time simulation of the powertrain. Developing those powertrain models is a time-consuming task, due to high dynamics and high switching frequencies of the electrical subsystem and due to the large diversity of powertrain configurations. The electrical subsystem comprises the electric motor, inverter and battery whereas the different powertrain configurations are composed of the transmission, the combustion engine, the electric drives, etc.. Additionally, the correct power flow and losses within the powertrains components must be considered when HIL simulation is intended to be used for improving the control strategy.In this contribution a method for modeling arbitrary combinations of clutches and various types of gears is presented which enables an efficient modeling of transmission systems. The obtained models are real-time capable and the correct power flows and losses are considered. The method is applied to a powertrain with a two mode power-split transmission, which is a typical example comprising electric drives as well as shifting clutches. Finally simulation results will be presented.}}, author = {{Geng, Stefan and Schulte, Thomas}}, issn = {{2167-4205}}, journal = {{SAE International Journal of Alternative Powertrains }}, number = {{1}}, pages = {{34 -- 45}}, publisher = {{SAE International}}, title = {{{Real-Time Powertrain Models of Hybrid Electric Vehicles}}}, volume = {{4}}, year = {{2015}}, } @inproceedings{4014, abstract = {{In this contribution, a model-based method for analysing and designing energy systems comprising the electrical, thermal and chemical domain is presented. Beside the energy generation and consumption, the bidirectional coupling between all energy domains is considered, as well. This method is an adapted variant of the so called Hardware-in-the-Loop simulation where virtual energy components are combined with geographically distributed real energy components. In order to integrate the real components with minimal instrumentation efforts, measured quantities are included as information flows, only, while the physical power flows are connected to local available grid structures. The virtual energy components are represented by real-time capable models describing their physical behaviour. In this contribution, a CHP unit is described as a virtual energy component. The modelling approach is based on a time domain approach using state variables of the multiple domains to describe the dynamic behaviour. Afterwards, the model is parameterized by datasheet specifications and measurement data of several CHP units with different power ratings. Based on these results, a method for scaling the proposed CHP model is presented. Especially for parameter studies, this method allows a simple adaption of a general parameterized CHP model. Moreover, a method for scaling such models with respect to the modelling depth is proposed and exemplarily applied to the electrical generator of the CHP model. This scaling method enables the model adaptations for different simulation purposes like detailed investigations of single structures and holistic investigations of large combined grid systems.}}, author = {{Griese, Martin and Pawlik, Thomas and Schulte, Thomas}}, booktitle = {{ International ETG Congress 2015 ; Die Energiewende - Blueprints for the new energy age}}, isbn = {{978-3-8007-4121-2}}, location = {{Bonn}}, publisher = {{VDE-Verlag}}, title = {{{Methods for scaling a physical based CHP model for HIL simulation of smart combined grid systems}}}, year = {{2015}}, } @inproceedings{4016, abstract = {{Power electronic devices are growing in importance in automotive applications. Power converters are used in hybrid electric vehicles but also in other vehicle applications like electric steering systems for example. For testing electronic equipment, hardware-in-the-loop simulation is a today's standard method in the automotive industry. Hardware-in-the-loop simulation requires a real-time capable model of the plant but the development of those models of power electronic circuits is still an ambitious task due to the switching of the semiconductors devices. In this contribution, a FPGA-based hardware-in-the-loop simulation of a rectifier with power factor correction will be presented. First a short introduction on modelling methods for real-time simulation of power electronics and the rectifier with power factor correction is given. Furthermore, the modeling of the rectifier and the power factor correction stage and the simulation algorithm are described. Finally, the implementation of the hardware-in-the-loop simulation and measurement results from the real plant are presented and compared to the simulation results.}}, author = {{Kiffe, Axel and Schulte, Thomas}}, location = {{Geneva, Switzerland}}, pages = {{1 -- 8}}, publisher = {{IEEE}}, title = {{{FPGA-based hardware-in-the-loop simulation of a rectifier with power factor correction}}}, year = {{2015}}, } @inproceedings{4017, abstract = {{In diesem Beitrag wurde eine Vorgehenswelse vorgestellt, mit der echtzeitfähige Modelle beliebiger Konfigurationen von Übersetzungen, Kupplungen und weiteren mechanischen Elementen kombiniert mit Elektromotoren erstellt werden können. Außerdem berücksichtigen diese Modelle die Verlustleistungen im System und können somit zur Auslegung von Betriebsstrategien am HIL-System verwendet werden. Die Vorgehenswelse ist in vier Schritte unterteilt und unter Matlab/Slmulink implementiert. Durch die Wahl dieser in der HIL-Simulation weitverbreiteten Modellierungsumgebung können weitere Matlab/Simullnk basierte Streckenmodelle eingebunden werden und die zur HIL-Simulation benötigte Kopplung zu den Steuergeräteschnittstellen effizient durchgeführt werden. Aufgrund einer graphischen Darstellung der Systeme und einer halbautomatisierten Erstellung der Modelle ist der Ansatz entsprechend flexibel gegenüber Systemmodifikationen. Die Modellierungsmethode wurde anhand von Simulationen für einen Beispielantriebsstrang validiert.}}, author = {{Geng, Stefan and Brose, M. and Schulte, Thomas}}, publisher = {{VDI Verlag}}, title = {{{Konfigurierbare und Echtzeitfähige Modelle von Getrieben mit gekoppelten Elektromotoren unter Berücksichtigung korrekter Verlustleistung}}}, year = {{2015}}, } @article{4018, abstract = {{In this contribution, a model-based method for analyzing and designing energy systems comprising the electrical, thermal and chemical domains is presented. Beside the energy generation and consumption, the bidirectional coupling between all energy domains is considered, as well. This method is an adapted variant of the so called Hardware-in-the-Loop simulation where virtual energy components are combined with geographically distributed real energy components. In order to integrate the real components with minimal instrumentation efforts, measured quantities are included as information flows, only, while the physical power flows are connected to local available grid structures. This virtual coupling has the further advantage of a simple scalability so that existing real components can be used for different applications. The virtual energy components are represented by real-time capable models describing their physical behavior. In this contribution, a CHP unit is described as a first virtual energy component. The modeling approach is based on a time domain approach using state variables of the multiple domains to describe the dynamic behavior. Furthermore, the model is scalable regarding the modeling depth and the power ratings which allows an application for different simulation scenarios. Besides the modeling of a standalone CHP unit, its integration into a simulated electrical grid is discussed as well. Afterwards, the overall model is parameterized and validated with data of a medium size CHP unit. Finally, the model is used for simulations of an exemplary electrical grid.}}, author = {{Griese, Martin and Schulte, Thomas and Maas, Jürgen}}, issn = {{2148-7847}}, journal = {{Journal of Thermal Engineering}}, number = {{6}}, pages = {{467 -- 487}}, publisher = {{Yildiz Technical University }}, title = {{{A holistic modeling and simulation approach to optimize a smart combined grid system of different renewable energies}}}, volume = {{1}}, year = {{2015}}, } @inbook{4019, abstract = {{Im Rahmen dieses Beitrages wurde die Notwendigkeit intelligenter, gekoppelter Verbundsysteme diskutiert und ein wissenschaftlicher Ansatz zur Optimierung solcher Systeme vorgestellt. Der Ansatz basiert auf einer ganzheitlichen Betrachtung im Rahmen einer Echtzeitsimulation mit gekoppelten realen Komponenten. Zur virtuellen Koppelung wird ein Simulationsmanager eingesetzt, der eine Skalierung der realen Komponenten erlaubt. Dies ermöglicht eine einfache Adaptierung von realen und simulierten Komponenten an das jeweils betrachtete Szenario. Als eine erste simulierte Komponente wurde eine KWK-Anlage untersucht und bezüglich der elektrischen, thermischen, mechanischen und chemischen Domänen modelliert. Das Gesamtmodell berücksichtigt das Verhalten des Verbrennungsmotors, des Synchrongenerators und der Wärmeübertrager. Mit Hilfe von Messgrößen einer realen KWK-Anlage wurde im Anschluss das Gesamtmodell validiert. Die generierten Simulationsergebnisse weisen eine gute Übereinstimmung mit den erhobenen Messdaten auf. Aktuell werden weitere Energiekomponenten untersucht, um Energiesysteme ganzheitlich optimieren zu können. Dieser Beitrag ist im Rahmen des vom Land NRW geförderten Forschungsschwerpunktes „Intelligente Energiesysteme (IES)“ im Projekt „Smart Energy Village“ entstanden.}}, author = {{Schulte, Thomas and Griese, Martin and Pawlik, Thomas and Maas, Jürgen}}, booktitle = {{Detmolder Bauphysiktag 2015}}, editor = {{Schwickert, Susanne}}, isbn = {{978-3-8440-3484-4}}, pages = {{117 -- 126}}, publisher = {{Shaker Verlag}}, title = {{{Smart Energy Village – Ein Forschungsansatz für die Energieversorgung der Zukunft}}}, volume = {{2015}}, year = {{2015}}, } @inproceedings{4039, abstract = {{Hardware-in-the-loop simulation of power electronic devices is growing in importance in diverse fields. For testing the electronic control units in automotive applications hardware-in-the-loop simulation is a today's standard method. It is also applied for many industrial applications like power converters and electric drives. Anyway real-time capable models of power electronics are required. In this contribution, a novel approach for real-time simulation of power electronic circuits comprising fast FPGA-based output models is presented. Two types of modeling circuits are described and compared to each other. Both methods do not fulfill the requirements of the novel approach to combine the advantages of the processor- and FPGA-based simulation. Hence, parts of both methods were combined. Additionally, the switching event detection was improved for low latency reaction and a correction method based on average control is described. The simulation results matches to the reference very well. Therefore the novel approach Is an interesting alternative for hardware-in-the-loop simulation when the algorithm of the electronic control unit requires a very fast reaction on switching events.}}, author = {{Kiffe, Axel and Brose, Manuel and Schulte, Thomas}}, booktitle = {{PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013}}, isbn = {{978-1-62993-308-5}}, pages = {{1688 -- 1695}}, publisher = {{Curran Associates, Inc.}}, title = {{{Novel Approach for Real-time Simulation of Power Eiectronic Circuits Comprising Fast FPGA-based Output Modeis}}}, year = {{2015}}, } @inproceedings{4089, author = {{Pawlik, Thomas and Griese, Martin and Dohmann, Joachim and Maas, Jürgen and Schulte, Thomas}}, location = {{Antalya, Türkei}}, title = {{{Concept of a bidirectional Power-to-X Process System for technical and economical Investigations of Conversion and Storage Technologies}}}, year = {{2015}}, } @article{4123, author = {{Schwickert, Susanne and Joachimsmeyer, K.}}, journal = {{Wohnmedizin}}, number = {{3}}, publisher = {{Gesellschaft für Wohnmedizin, Bauhygiene und Innenraumtoxikologie}}, title = {{{Volle Konzentration in Schule und Büro – Neues und Bewährtes in der Raumakustik}}}, year = {{2015}}, } @proceedings{4124, abstract = {{In wohl keinem Bereich des Bauwesens ergeben sich laufend so viele Neuerungen bei gesetzlichen Anforderungen, normativen Verfahren und ingenieurmäßigen Methoden wie in der Bauphysik. Die Erreichung bestimmter bauphysikalischer Kennwerte stellt heute mehr denn je ein Qualitätsmerkmal von Gebäuden dar. Ein deutlicher Anteil bleibt öffentlichen Forschungsbudgets im Baubereich fördert gezielt Forschungsvorhaben im Hinblick auf bauphysikalische Fortschritte und Erkenntnisse. Der Detmolder Schule für Architektur und Innenarchitektur mit ihrer mehr als 120-jährigen Lehrtradition ist die Vermittlung aktueller baupraktischer Kenntnisse und fachlicher Entwicklungen in Aus- und Weiterbildung seit jeher besonders wichtig. Der Detmolder Bauphysiktag lässt kompetente Referenten über aktuelle Themen aus den Bereichen des Wärme- und Feuchteschutzes, der Raumakustik, der Stadtbauphysik, der Integralen Quartiersplanung und des Brandschutzes im Neubaubereich sowie in der Bausanierung berichten. Praxis- Workshops dienen der Vertiefung ausgewählter Themen der vorgestellten Anforderungen und baupraktischen Lösungen sowie Ingenieurmethoden zu akustischen Prüfverfahren und neuer Brandschutznormung. Im vorliegenden Band sind die im Tagungsprogramm enthaltenen Vorträge, erweitert um zusätzliche Berichte aus den Lehrgebieten, zusammengeführt. }}, editor = {{Schwickert, Susanne}}, isbn = {{978-3-8440-3484-4}}, keywords = {{Bauphysik}}, pages = {{194}}, publisher = {{Shaker}}, title = {{{Detmolder Bauphysiktag 2015}}}, year = {{2015}}, } @inproceedings{4125, abstract = {{In der langen Reihe all der wichtigen Gestaltungkriterien, die Wohlbefinden, Konzentrationsfähigkeit, Sozialverhalten, Gesundheit und Motivation fördern sollen, müssen Ruhe und gutes Verstehen für den Planer zum wichtigsten Merkmal werden – das gilt für die Schule wie für den Büroarbeitsplatz. Das geschieht neben anderen raumakustischen Maßnahmen insbesondere durch Realisierung kurzer Nachhallzeiten mittels ausreichender Schallabsorptionsflächen. Bei sinnvoller Positionierung der Absorber werden störende Echoeffekte verhindert, ohne dabei brauchbare Reflexionsflächen auszuschalten. Zudem unterbleibt Untersuchungen zufolge das beschriebene Hochschrauben des Pegels über den Tag. Vieles ist schon lange bekannt, wurde aber in der Vergangenheit zuweilen gerne aus Kostengründen ignoriert –zugunsten optischer oder energetischer Highlights, die augenfälliger und werbewirksamer sind als die unsichtbare Akustik, die in ihrer Qualität weder in einem Energieausweis noch bei der Betriebskostenabrechnung zu Tage tritt. Die Einführung der Nutzungsart „Unterricht Inklusion“ in E DIN 18041 zementiert nun aber die Notwendigkeit sehr guter raumakustischer Verhältnisse in modernen Klassenzimmern. Auch Schulmensen und Spielräume in Kindertagesstätten sind großzügig mit Absorptionsmaßnahmen zu bedenken. Die Neufassungen der DIN EN ISO 3382-3 und E VDI 2569 sind als Antwort zu neusten Studien zur kognitiven Leistungsfähigkeit am Arbeitsplatz zu werten. Zusätzliche Kennwerte zur Beurteilung der raumakustischen Qualität in Büros, die weit über das altgediente Kriterium der Nachhallzeit hinausgehen, werden von Architekten und Innenarchitekten Umdenken bei Grundrisslösungen und Raumakustikmaßnahmen bewirken, aber auch Akustikern zusätzliche Mess- und Simulationsaufgaben mit sich bringen. Dennoch: es liegt in der Hand des verantwortungsvollen Planers, Beraters und Bauherren, das Bewusstsein für raumakustische Attribute in Bildungs- und Arbeitsstätten zu wecken und dementsprechend Tatsachen zu schaffen. Ergonomische Konditionen liefern den wichtigen Rahmen für Leistungsfähigkeit und Freude am Lernen und Arbeiten.}}, author = {{Zickmantel, F. and Schwickert, Susanne}}, booktitle = {{Detmolder Bauphysiktag 2015}}, editor = {{Schwickert, Susanne}}, location = {{Detmold}}, publisher = {{Shaker}}, title = {{{Lernen und Arbeiten im Wandel - Neue Anforderungen an die Raumakustik in Büro- und Schulbau}}}, year = {{2015}}, } @inproceedings{4126, abstract = {{Die Studie fokussierte eine Erweiterung bisheriger Untersuchungen in klimatisch kritischen Regionen mit hoher Bebauungsdichte und geringem Grünflächenanteil und untersuchte die Auswirkungen von Dachmaterial und Gebäudeanordnung unter dem Aspekt der architektonischen Grenzen in den Bebauungsplänen in einem durch öffentliche Grünflächen geprägten Quartier, welches sich gemäß des angesetzten Außenklimas in einer mittel bis süddeutschen Stadt befinden könnte. Zusammenfassend ist auf Basis der hier dargelegten Untersuchungen festzustellen, dass in einem Quartier mit einem Grünflächenanteil von ca. 55% und einer Bebauungsdichte von GRZ: ca. 0,25 sowie GFZ: ca. 1,3 die Einflussnahme architektonischer Möglichkeiten im Dachmaterial sehr gering ist. Die Simulationsergebnisse zeigen, dass bei dem zugrunde gelegten Grünflächenanteil und gleich bleibender solarer Strahlung insbesondere die Gebäudeanordnung und resultierenden Windströme Einfluss auf die Umgebungstemperaturen nehmen. Die geringen Luftbewegungen führen dazu, dass die konvektiven Strömungen der warmen Oberflächen nicht in die Umgebung abgetragen werden können. Die daraus resultierenden Oberflächentemperaturen können erst nachts, wenn die Umgebungstemperatur stärker abgekühlt ist, wieder sinken. Das Basismodell, gestaltet als Einzelblockweise mit einer nahezu orthogonalen Anordnung, weist unter den dargelegten Varianten die höchsten Windgeschwindigkeiten und niedrigsten Temperaturen in der Nacht auf, wohingegen im Hofmodell die höchsten Temperaturspitzen vorzufinden sind, auch wenn sich das Klima während des Tages sehr homogen verhält. Zusätzliche Untersuchungen den Grünflächenanteil sowie der Grünflächenanordnung und den Kompaktheitsgrad der Bebauung betreffend sind erforderlich, um weiterführende Planungsleitlinien zu erstellen.}}, author = {{Hödt, I. and Glahn, Oliver and Schwickert, Susanne}}, booktitle = {{Detmolder Bauphysiktag 2015}}, editor = {{Schwickert, Susanne}}, location = {{Detmold}}, publisher = {{Shaker}}, title = {{{Dem Heat Island-Effekt auf der Spur}}}, year = {{2015}}, } @phdthesis{421, abstract = {{Es wird ein agentenbasiertes Planungsverfahren vorgestellt, das die Vereinbarkeit von Berufs- und Privatleben des Personals besser als bisher gewährleisten soll. Dabei wird durch eine Verbesserung der Einsatzzeitplanung sowohl den individuellen Präferenzen des Personals als auch einer fairen Berücksichtigung der Arbeitszeitwünsche Rechnung getragen. Hinsichtlich der betrieblichen Anforderungen und deren Erfüllung durch die geplanten Einsatzzeiten des Personals erfolgt eine dynamische Bewertung der Arbeitsabläufe mit Hilfe der personalorientierten Simulation. Dissertation am Institut für Arbeitswissenschaft und Betriebsorganisation (Karlsruhe): Forschungsberichte aus dem Institut für Arbeitswissenschaft und Betriebsorganisation der Universität Karlsruhe ; Bd. 44}}, author = {{Gamber, Thilo Gerhard}}, isbn = {{978-3-8440-3518-6}}, keywords = {{Arbeitszeitgestaltung, Personaleinsatz, Simulation}}, pages = {{289}}, publisher = {{Shaker Verlag}}, title = {{{Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung}}}, year = {{2015}}, } @inproceedings{422, author = {{Gamber, Thilo Gerhard and Zülch, Gert}}, booktitle = {{Simulation in production and logistics 2015}}, editor = {{Rabe, Markus and Clausen, Uwe}}, isbn = {{978-3-8396-0936-1}}, keywords = {{Produktion, Logistik, Simulation}}, location = {{Dortmund}}, pages = {{711--720}}, publisher = {{Fraunhofer Verlag}}, title = {{{Agentenbasierte Planung und simulationsunterstützte Bewertung praferenzorientierter Einsatzzeiten des Personals }}}, year = {{2015}}, } @techreport{423, abstract = {{Unternehmen, insbesondere kleine und mittlere (KMU), sind zunehmend mit nicht oder kaum beeinflussbaren externen Herausforderungen konfrontiert, wie Globalisierung (Wettbewerbsdruck, Preisverfall, Verknappung von Ressourcen), Individualisierung (in Bezug auf Produkte und Dienstleistungen) sowie steigende Ansprüche an die Lieferqualität (Zwang zur späten Produktauslegung, Reduzierung von Lieferzeiten).}}, author = {{Helmrich, Ingo and Jungkind, Wilfried}}, booktitle = {{refa.de blog}}, title = {{{REFA-Standardprogramm PEP und montagegerechte Produktgestaltung}}}, year = {{2015}}, } @article{424, abstract = {{Dem Industrial Engineering (IE) kommt eine Schlüsselfunktion bei der permanenten Weiterentwicklung von Betrieben zu. Die Funktion ist jedoch vor allem in KMU oftmals eher schwach ausgeprägt. Zudem ist an vergleichsweise wenigen deutschen Hochschulen ein IE-Schwerpunkt etabliert. In diesem Beitrag wird skizziert, wie an der Hochschule Ostwestfalen-Lippe, orientiert an einem zukunftsweisenden IE-Anforderungsprofil und den damit verbundenen notwendigen Kompetenzen, ein Curriculum für einen Bachelorstudiengang mit IE-Schwerpunkt entwickelt und implementiert worden ist. }}, author = {{Hinrichsen, Sven and Jungkind, Wilfried and Könneker, Martin}}, issn = {{0340-2444}}, journal = {{Zeitschrift für Arbeitswissenschaft}}, number = {{4}}, pages = {{197--201}}, publisher = {{Springer-Verlag GmbH}}, title = {{{Industrial Engineering-Ausbildung an der Hochschule Ostwestfalen-Lippe}}}, volume = {{69}}, year = {{2015}}, } @article{4241, author = {{Mambetow, Artur and Neufeld, Ruben and Borcherding, Holger}}, issn = {{1868-5919}}, journal = {{Ingenieur-Spiegel}}, number = {{April}}, pages = {{41}}, publisher = {{Public Verlagsgesellschaft und Anzeigenagentur mbH}}, title = {{{Drehzahlvariabler Betrieb von Blockheizkraftwerken – Ein Konzept mit vielen Vorteilen}}}, year = {{2015}}, } @article{4242, author = {{Borcherding, Holger}}, issn = {{1612-6475}}, journal = {{automation}}, number = {{3}}, pages = {{34 -- 35}}, publisher = {{Heinrich Publikationen GmbH}}, title = {{{Holzbearbeitung 4.0}}}, year = {{2015}}, } @article{4243, author = {{Borcherding, Holger}}, issn = {{1614-6514}}, journal = {{Holz- und Möbelindustrie Deutschland : Informationen für die Wirtschaft}}, number = {{März}}, pages = {{19}}, publisher = {{Kuhn}}, title = {{{Besser bohren - Projekt optimiert Bohrprozess in der Holzbearbeitung}}}, year = {{2015}}, } @article{4244, author = {{Borcherding, Holger}}, journal = {{antriebstechnik}}, number = {{08}}, pages = {{42 -- 45}}, publisher = {{Vereinigte Fachverlage}}, title = {{{Auf dem Weg zum "mitdenkenden" Antrieb}}}, year = {{2015}}, } @article{4245, author = {{Borcherding, Holger}}, issn = {{0016-4232}}, journal = {{Galvanotechnik : das Innovationsmagazin }}, number = {{09}}, pages = {{1808 -- 1812}}, publisher = {{Leuze}}, title = {{{Ostwestfalen-Lippe: Elektronikprototypen von der Hochschule}}}, year = {{2015}}, } @article{425, abstract = {{Der Maschinen- und Anlagenbau steht vor einer technologischen Veränderung. Diese beinhaltet zum einen die Integration von zunehmenden Funktionen in Maschinen und zum anderen die Vernetzung von Maschinen über das Internet. Diese Entwicklung wird in Deutschland auch mit dem Begriff »Industrie 4.0« gekennzeichnet. Im Zuge dieser Entwicklungen kommt der ergonomischen Gestaltung von Produktionsmaschinen eine entscheidende Bedeutung zu. Anhand einer Studie zur Verwendung von Bildzeichen an Bedienelementen konnte gezeigt werden, dass deutliche ergonomische Verbesserungspotenziale bestehen.}}, author = {{Hinrichsen, Sven and Riediger, Daniel and Adrian, Benjamin}}, issn = {{2191-6268}}, journal = {{Betriebspraxis & Arbeitsforschung}}, pages = {{24--29}}, publisher = {{Heider Verlag}}, title = {{{Ergonomische Gestaltung von Produktionsmaschinen im Kontext der Industrie 4.0}}}, volume = {{224}}, year = {{2015}}, } @article{4250, author = {{Ehlich, M. and Borcherding, Holger}}, journal = {{MASCHINENMARKT}}, number = {{KW 15}}, title = {{{Selbstoptimierende Fertigung wird Real}}}, year = {{2015}}, } @inproceedings{4262, author = {{Austermann, Johann and Cepin, Simon and Borcherding, Holger}}, booktitle = {{PCIM Europe 2015 : High voltage module with low internal inductance for next chip generation - next High Power Density Dual (nHPD2)}}, isbn = {{978-3-8007-3924-0}}, location = {{Nuremberg}}, pages = {{1519 -- 1526}}, publisher = {{VDE-Verlag}}, title = {{{Compact and Cost-efficient Power Regeneration System for Voltage Source Converters}}}, year = {{2015}}, } @inproceedings{427, abstract = {{Für Länder mit hohen Lohnkosten eignen sich aus wirtschaftlichen Gründen hauptsächlich hochautomatisierte Montagekonzepte. Für Niedriglohnländer hybride oder ausschließlich manuelle Montagesysteme. Ein ideales Montagekonzept ist so gestaltet, dass es durch wandlungsfähige Eigenschaften beide Ländertypen mit wenig Änderungsaufwand abdecken kann. Der Beitrag behandelt Möglichkeiten und Ansätze, um solch ein wandlungsfähiges, hybrides Montagesystem zu gestalten und erläutert die Realisierung ausgewählter Methoden an einem hybriden Montagesystem der Continental AG.}}, author = {{Hrdina, Jan and Gamber, Thilo Gerhard}}, booktitle = {{ Verantwortung für die Arbeit der Zukunft, Frühjahrskongress der Gesellschaft für Arbeitswissenschaft}}, isbn = {{978-3-936804-18-8}}, keywords = {{hybrides System, Montagesystem, Niedriglohnland, Montagekonzept, hybrides Montagesystem}}, location = {{Karlsruhe}}, publisher = {{GfA-Press}}, title = {{{Einsatz von Methoden der Wandlungsfähigkeit bei einem hybriden Montagesystem}}}, year = {{2015}}, } @article{428, abstract = {{Der Trend einer zunehmenden Produkt- und Variantenvielfalt macht es notwendig, Betriebsmittel so zu planen, dass diese möglichst für ein breites Produktspektrum einsetzbar oder einfach auf neue Produkte oder Produktvarianten umzurüsten sind. Hierdurch entsteht in vielen Branchen der Bedarf nach wandlungsfähigen Fertigungssystemen. Wandlungsfähigkeit oder Rekonfiguration bedeutet, ein Fertigungssystem mit einfachen Mitteln umbauen zu können, um die Systemfunktionen an veränderte oder neue Anforderungen strukturell anzupassen. Diese Anpassungen sollten möglichst ohne Experten erfolgen können. Dazu kann das an die Computertechnik angelehnte Prinzip des „Plug and Produce“ vorteilhaft genutzt werden. In diesem Beitrag wird dieses Prinzip an zwei Fertigungssystemen der Smart Factory OWL, einer gemeinsamen Initiative der Fraunhofer-Gesellschaft und der Hochschule Ostwestfalen-Lippe in Lemgo, erläutert.}}, author = {{Jasperneite, Jürgen and Hinrichsen, Sven and Niggemann, Oliver}}, issn = {{0170-6012}}, journal = {{Informatik-Spektrum}}, number = {{3}}, pages = {{183--190}}, publisher = {{Springer-Verlag GmbH}}, title = {{{,,Plug-and-Produce“ für Fertigungssysteme - Anwendungsfälle und Lösungsansätze}}}, volume = {{38}}, year = {{2015}}, } @book{4283, abstract = {{IEC TS 62578:2015 describes the operation conditions and typical characteristics of active infeed converters (AIC) of all technologies and topologies which can be connected between the electrical power supply network (lines) a.c. side and a constant current or voltage type d.c. side and which can convert electrical power (active and reactive) in both directions (generative or regenerative). The following is excluded from the scope: - Requirements for the design, development or further functionality of active infeed applications. - Probability of interactions or influences of the AIC with other equipment caused by parasitic elements in an installation or caused by poor electronic design as well as their mitigations. - 'Overhead line' power supply networks because of lack of information (measurements) of their three phase impedances. This edition includes the following significant technical changes with respect to the previous edition: a) IEC TS 62578, in its revised version includes observed values out of practical applications for emission values below 150 kHz. b) Therefore the document has been extended compared to the first edition, several detailed analysis results are given in the extended Annexes. c) Design recommendations have been derived from the international working group by an assessment of the power supply impedances between 2 kHz and 9 kHz, a comprehensive analysis of the withstand capability of power capacitors against harmonic currents injected by AIC, immunity tests of equipment and considerations about shifted resonances in the power supply network with increased population of undamped filter capacitors. }}, author = {{Borcherding, Holger}}, pages = {{240}}, publisher = {{VDE-Verlag}}, title = {{{IEC TS 62578: 2015 }}}, year = {{2015}}, } @techreport{429, abstract = {{Unternehmen, insbesondere kleine und mittlere (KMU), sind zunehmend mit nicht oder kaum beeinflussbaren externen Herausforderungen konfrontiert. Globalisierung (Wettbewerbsdruck, Preisverfall, Verknappung von Ressourcen), Individualisierung (in Bezug auf Produkte und Dienstleistungen) sowie steigende Ansprüche an die Lieferqualität (Zwang zur späten Produktauslegung, Reduzierung von Lieferzeiten) verlangen den Unternehmen einiges ab.}}, author = {{Könneker, Martin and Jungkind, Wilfried}}, publisher = {{REFA AG}}, title = {{{Das REFA-Standardprogramm Betriebsmittelmanagement}}}, year = {{2015}}, } @inproceedings{431, abstract = {{Der Trend einer zunehmenden technologischen Komplexität von Produktionsmaschinen ist vor allem auf die Integration zusätzlicher Funktionen in Maschinen zurückzuführen. Damit nehmen auch die Anforderungen an die Gebrauchstauglichkeit der Bediensysteme weiter zu. Das Ziel der Studie ist es, die intuitive Bedienbarkeit von fünf modernen Produktionsmaschinen im Hinblick auf die verwendeten grafischen Symbole (Icons) zu untersuchen und Handlungsempfehlungen abzuleiten. Die Ergebnisse der Studie zeigen, dass die verwendeten Bildzeichen an den untersuchten Maschinen nur bedingt selbsterklärend und intuitiv gestaltet sind und somit deutliche Defizite für eine einfache und intuitive Bedienung aufweisen. Im Ergebnis werden Hinweise zur Gestaltung von Bildzeichen an Produktionsmaschinen aufgeführt.}}, author = {{Riediger, Daniel and Hinrichsen, Sven and Schlee, Alexander}}, booktitle = {{VerANTWORTung für die Arbeit der Zukunft : 61. Kongress der Gesellschaft für Arbeitswissenschaft : Karlsruher Institut für Technologie, Institut für Arbeitswissenschaft und Betriebsorganisation}}, isbn = {{978-3-936804-18-8 }}, location = {{Karlsruhe}}, publisher = {{Gesellschaft für Arbeitswissenschaft e.V. }}, title = {{{Ergonomische Gestaltung von grafischen Bedienelementen an Produktionsmaschinen}}}, year = {{2015}}, } @inproceedings{432, abstract = {{The trend of increasing technological complexity of machines mainly correlates with the integration of additional functions in machines. Increasing functionality of the machines leads to an increased number of control elements, which limits the clarity of the machine operation and leads to higher cognitive demands in the machine operation. Due to the growing functional range of production machines the demand of usability for the operating systems continues to grow. The selection and design of icons for the identification of controls contributes significantly to usability, especially for intuitive operation of production machines. The aim of this study is to investigate the intuitive usability of production machines, to consider its use of graphical elements (icons) and to derive recommendations for a demand-oriented selection and design of icons. To achieve this goal, laboratory studies at five modern production machines (laser sintering machine, CNC universal lathe, plastic injection molding machine, laser processing machine, woodworking machine) - each with different operating concept - were performed. The results of the study show that the used symbols in the examined machines are only limited self-explanatory and intuitive, and thus have significant deficits for easy and intuitive operation. Especially the combination of screens and electronic keys or switches was often criticized and leads to uncertainty in the operation. As a result, recommendations for the design of icons on production machines are given. }}, author = {{Riediger, Daniel and Hinrichsen, Sven and Schlee, Alexander}}, booktitle = {{Production Engineering and Management}}, editor = {{Villmer, Franz-Josef and Padoano, Elio}}, isbn = {{978-3-941645-11-0}}, keywords = {{Usability, production mach ine, icons, usability, hum an-machine compatibility}}, location = {{Trieste}}, number = {{1}}, pages = {{123--130}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Ergonomic Design of Graphical Control Elements on Production Machines}}}, year = {{2015}}, } @inproceedings{4329, abstract = {{The term Industrie 4.0 carries the vision of smart factories, which automatically adapt to changes and assist the human as much as possible during operation and maintenance. This includes smart human machine interfaces, which reduce the chances of errors and help to make the right decisions. This paper presents an approach to equip the maintenance software running on a tablet PC with augmented reality functionality to be able to place virtual sticky notes at production modules. Additionally, these sticky notes are enriched with position information. The central element of this approach is an ontology-based context-aware framework, which aggregates and processes data from different sources. As a result, a tablet PC application was implemented, which allows displaying maintenance information as well as live plant process data in the form of augmented reality. More than 100 of those sticky notes can be placed using this system, whereas each note requires a file size of 12 to 16 kilo bytes. After placing a sticky note, the system recognizes it even if the camera's position is not exactly the same as during the placing process.}}, author = {{Flatt, Holger and Koch, Nils and Guenter, Andrei and Röcker, Carsten and Jasperneite, Jürgen}}, booktitle = {{ 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA)}}, keywords = {{Maintenance engineering, Augmented reality, Context, Context modelin, Production facilities, Cameras}}, location = {{Luxembourg, Luxembourg}}, publisher = {{IEEE}}, title = {{{A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization}}}, doi = {{10.1109/ETFA.2015.7301586}}, year = {{2015}}, } @inproceedings{4330, abstract = {{Catchwords such as “Cyber-Physical-Systems” and “Industry 4.0” describe the current development of systems with embedded intelligence. These systems can be characterized by an increasing technical complexity that must be addressed in the user interface. In this paper we analyze the specific requirements posed by the interaction with cyber-physical-systems, present a coordinated approach to these requirements and illustrate our approach with a practical example of an assistance system for assembly workers in an industrial production environment.}}, author = {{Paelke, Volker and Röcker, Carsten}}, booktitle = {{Design, User Experience, and Usability: Design Discourse}}, isbn = {{978-3-319-20885-5}}, keywords = {{Industrial IT, User-Centered design, Usability, User interfaces, Cyber-Physical-Systems, Industry 4.0, Augmented reality, Development processes and methods}}, location = {{Los Angeles, CA, USA}}, pages = {{75--85 }}, publisher = {{Springer}}, title = {{{User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. }}}, doi = {{10.1007/978-3-319-20886-2_8}}, volume = {{9186}}, year = {{2015}}, } @inproceedings{4331, abstract = {{When a user enters a personal identification number (PIN) into an automated teller machine or a point of sale terminal, there is a risk of some one watching from behind, trying to guess the PIN code. Such shoulder-surfing is a major security threat. In order to overcome this problem different PIN entry methods have been suggested. In this regard, gaze interaction methods are receiving attention in recent years, owing to the lowering cost of eye tracking technology. In this paper, we present SafetyPIN - an eye tracking based PIN entry system - which is aimed at making the PIN entry more secure with the help of an eye tracking device. We discuss the implementation and the initial evaluation of this system.}}, author = {{Seetharama, Mythreya and Paelke, Volker and Röcker, Carsten}}, booktitle = {{Human Aspects of Information Security, Privacy, and Trust}}, editor = {{Tryfonas, Theo and Askoxylakis, Ioannis}}, isbn = {{978-3-319-20375-1}}, keywords = {{PIN entry, Eye tracking, Security, Usability, Point of sale terminals}}, location = {{Los Angeles, CA, USA}}, pages = {{426--435}}, publisher = {{Springer}}, title = {{{SafetyPIN: Secure PIN Entry through Eye Tracking}}}, doi = {{10.1007/978-3-319-20376-8_38}}, volume = {{9190}}, year = {{2015}}, } @inproceedings{4332, abstract = {{The core value proposition for most hospitality brands is to provide unique customer experiences; therefore we expect commercially viable opportunities for ambient intelligence systems in hospitality in general, and the high-end sector in particular. We believe that ambient intelligence systems paired with principles of Aesthetic Intelligence could facilitate such unique experiences and at the same time strengthen and differentiate the brands. This paper gives an overview of challenges in this field, reviews research and outlines future scenarios enhancing safety, economic optimisation and – especially - convenience for hotel guests.}}, author = {{Plewe, Daniela Alina and Ong, Rui An and Röcker, Carsten}}, booktitle = {{HCI in Business }}, editor = {{Fui-Hoon Nah, Fiona and Tan, Chuan-Hoo}}, isbn = {{978-3-319-20894-7}}, keywords = {{Smart hospitality, Business applications for home/leisure, Technology and branding, Smart environments, Personalized services, Aesthetic intelligence, Ambient intelligence}}, location = {{Los Angeles, CA, USA}}, pages = {{739--747}}, publisher = {{Springer}}, title = {{{Ambient and Aesthetic Intelligence For High-End Hospitality}}}, doi = {{10.1007/978-3-319-20895-4_69}}, volume = {{9191}}, year = {{2015}}, } @inproceedings{4333, abstract = {{Most research in the field of ambient technology has been conducted in Western cultural spheres. In this paper, we want to explore potential approaches designers might take towards ambient systems in Asian contexts. We particularly aim at exploring the role of “ambience” in the development of such systems and analyzing how aesthetic factors vary depending on culture. We observed that efficiency and environmental factors influence design decisions and serve as feedback on smart technologies.}}, author = {{Kaiying, Cindy Lin and Plewe, Daniela Alina and Röcker, Carsten}}, booktitle = {{6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015}}, editor = {{Ahram, Tareq and Karwowski, Waldemar and Schmorrow, Dylan}}, keywords = {{Aesthetic intelligence, Ambient intelligence, Smart home, Assurance, China}}, location = {{Las Vegas, USA}}, pages = {{2155--2161}}, publisher = {{Elsevier}}, title = {{{The Ambience of Ambient Intelligence: Will Cultural, Social and Environmental Differences Lead to Localised Ambient Systems? }}}, doi = {{10.1016/j.promfg.2015.07.355}}, volume = {{3}}, year = {{2015}}, } @inproceedings{4334, abstract = {{This paper presents several conceptual approaches for improving user engagement and happiness in mass transport systems by effectively integrating principles of ambient and aesthetic intelligence. We introduce themed passenger carriages as constructed spaces with an overarching topic or narrative, designed to make commuting a meaningful and immersive experience. We examine the challenges for commuters and the existing solutions. Following which, we develop scenarios related to the fields of recreation, culture, education, business and entertainment. With an increasing interest of policy-makers in the concept of happiness as a socioeconomic measure for national wellbeing, we identify generic approaches for future research.}}, author = {{Rui, Ang Sheng and Plewe, Daniela Alina and Röcker, Carsten}}, booktitle = {{Proceedings of the International Conference on Applied Human Factors and Ergonomics 2015 }}, issn = {{2351-9789}}, keywords = {{Ambient intelligence, Aesthetic intelligence, Hedonic design, Transportation, User-centered design : Gamification}}, location = {{Las Vegas, Nevada, USA}}, pages = {{2103--2109}}, publisher = {{Elsevier}}, title = {{{Themed Passenger Cabins in Rapid Transit Systems: Promoting Commuters’ Happiness through Ambient and Aesthetic Intelligence}}}, doi = {{10.1016/j.promfg.2015.07.348}}, volume = {{3}}, year = {{2015}}, } @book{4336, abstract = {{Prolonged life expectancy along with the increasing complexity of medicine and health services raises health costs worldwide dramatically. Whilst the smart health concept has much potential to support the concept of the emerging P4-medicine (preventive, participatory, predictive, and personalized), such high-tech medicine produces large amounts of high-dimensional, weakly-structured data sets and massive amounts of unstructured information. All these technological approaches along with “big data” are turning the medical sciences into a data-intensive science. To keep pace with the growing amounts of complex data, smart hospital approaches are a commandment of the future, necessitating context aware computing along with advanced interaction paradigms in new physical-digital ecosystems. The very successful synergistic combination of methodologies and approaches from Human-Computer Interaction (HCI) and Knowledge Discovery and Data Mining (KDD) offers ideal conditions for the vision to support human intelligence with machine learning. The papers selected for this volume focus on hot topics in smart health; they discuss open problems and future challenges in order to provide a research agenda to stimulate further research and progress.}}, editor = {{Holzinger, Andreas and Röcker, Carsten and Ziefle, Martina}}, isbn = {{978-3-319-16225-6}}, issn = {{1611-3349}}, keywords = {{HCI, ambient assisted living, big data, computational intelligence, context awareness, data centric medicine, decision support, interactive data mining, keyword detection, knoweldge bases, knoweldge discovery, machine learning, medical decision support, medical informatics, natural language processing, pervasive health, smart home, ubiquitous computing, visualization, wearable sensors}}, pages = {{275}}, publisher = {{Springer}}, title = {{{Smart Health: Open Problems and Future Challenges}}}, doi = {{10.1007/978-3-319-16226-3}}, volume = {{8700}}, year = {{2015}}, } @inbook{4337, abstract = {{Our goal is to develop a system for coaching human motions (e.g., for rehabilitation and daily health maintenance). This paper focuses on how to coach a user so that his/her motion gets closer to the good template of a target motion. It is important to efficiently advise the user to emulate the crucial features that define the good template. The proposed system (1) automatically mines the crucial features of any kind of motion from a set of motion features and (2) gives the user feedback about how to modify the motion through an intuitive interface. The crucial features are mined by feature sparsification through binary classification between the samples of good and other motions. An interface for motion coaching is designed to give feedback via different channels (e.g., visually, aurally), depending on the type of error. To use the total system, all the user must do is just move and then get feedback on the motion. Following experimental results, open problems for future work are discussed.}}, author = {{Ukita, Norimichi and Kaulen, Daniel and Röcker, Carsten}}, booktitle = {{Smart Health : Open Problems and Future Challenges}}, editor = {{Holzinger, Andreas and Röcker, Carsten and Ziefle, Martina}}, isbn = {{978-3-319-16225-6}}, keywords = {{Motion coaching, Error feedback, Physical rehabilitation}}, pages = {{ 189 -- 208}}, publisher = {{Springer}}, title = {{{A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health}}}, doi = {{10.1007/978-3-319-16226-3_8}}, volume = {{8700}}, year = {{2015}}, } @inbook{4338, abstract = {{Prolonged life expectancy along with the increasing complexity of medicine and health services raises health costs worldwide dramatically. Advancements in ubiquitous computing applications in combination with the use of sophisticated intelligent sensor networks may provide a basis for help. Whilst the smart health concept has much potential to support the concept of the emerging P4-medicine (preventive, participatory, predictive, and personalized), such high-tech medicine produces large amounts of high-dimensional, weakly-structured data sets and massive amounts of unstructured information. All these technological approaches along with “big data” are turning the medical sciences into a data-intensive science. To keep pace with the growing amounts of complex data, smart hospital approaches are a commandment of the future, necessitating context aware computing along with advanced interaction paradigms in new physical-digital ecosystems. In such a system the medical doctors are supported by their smart mobile medical assistants on managing their floods of data semi-automatically by following the human-in-the-loop concept. At the same time patients are supported by their health assistants to facilitate a healthier life, wellness and wellbeing.}}, author = {{Holzinger, Andreas and Röcker, Carsten and Ziefle, Martina}}, booktitle = {{ Smart Health : Open Problems and Future Challenges}}, editor = {{Holzinger, Andreas and Röcker, Carsten and Ziefle, Martina}}, isbn = {{978-3-319-16225-6}}, keywords = {{Smart health, Smart hospital, Ubiquitous computing, Pervasive health, P4 medicine, Context awareness, Computational intelligence}}, pages = {{1 -- 20}}, publisher = {{Springer}}, title = {{{From Smart Health to Smart Hospitals}}}, doi = {{10.1007/978-3-319-16226-3_1}}, volume = {{8700}}, year = {{2015}}, } @inproceedings{2166, author = {{Gillich, Eugen and Dörksen, Helene and Lohweg, Volker}}, booktitle = {{IST/SPIE Electronic Imaging 2015, Image Processing: Machine Vision Applications VIII}}, pages = {{1--12}}, publisher = {{SPIE}}, title = {{{Advanced Color Processing for Mobile Devices }}}, year = {{2015}}, } @inproceedings{2167, abstract = {{Cyber-Physical Production Systems (CPPSs) are in the focus of research, industry and politics: By applying new IT and new computer science solutions, production systems will become more adaptable, more resource ef- ficient and more user friendly. The analysis and diagnosis of such systems is a major part of this trend: Plants should detect automatically wear, faults and suboptimal configurations. This paper reflects the current state-of- the-art in diagnosis against the requirements of CPPSs, identifies three main gaps and gives application scenarios to outline first ideas for potential solutions to close these gaps. }}, author = {{Niggemann, Oliver and Lohweg, Volker}}, booktitle = {{Twenty-Ninth Conference on Artificial Intelligence (AAAI-15)}}, keywords = {{Cyber-Physical Systems, Machine Learning, Diagnosis, Anomaly Detection}}, title = {{{On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda}}}, year = {{2015}}, } @article{2269, abstract = {{This paper presents a classroom experiment on pricing strategies available to monopolists. Each student makes production decisions as a monopolist during the experiment, learning from his/her own experiences what it means to be a price searcher. Full information is provided on cost conditions, while the demand function remains unknown to the participants. Given a sufficient number of periods, students will in principle be able to maximise their profits by applying a simple trial and error strategy. However, one of the objectives of the experiment is to demonstrate to students that search strategies based on economic principles are more efficient.}}, author = {{von Blanckenburg, Korbinian and Neubert, Milena}}, issn = {{2090-2123}}, journal = {{Economics Research International}}, keywords = {{Classroom experiment, monopoly, trial and error, pricing strategy}}, pages = {{1--10}}, publisher = {{Hindawi Publ. Corp.}}, title = {{{Monopoly Profit Maximization: Success and Economic Principles}}}, doi = {{10.1155/2015/875301}}, year = {{2015}}, } @article{2312, author = {{Barthold, Franz-Joseph and Materna, Daniel}}, issn = {{1097-0207}}, journal = {{International Journal for Numerical Methods in Engineering}}, keywords = {{extended finite element method, structural optimisation, sensitivity analysis}}, number = {{3}}, pages = {{209--234}}, publisher = {{Wiley Online Library}}, title = {{{A modified extended finite element method approach for design sensitivity analysis}}}, doi = {{10.1002/nme.4930}}, volume = {{104}}, year = {{2015}}, } @article{2357, author = {{Becker, Barbara and Nerenz, Heiko and Quadflieg, Jutta Maria and Schrader, Andreas and Becker, Verena }}, journal = {{SOFW-Journal : Home & personal care ingredients & formulations; Deutsche Ausgabe}}, number = {{11}}, pages = {{10--17}}, publisher = {{Verl. für Chemische Industrie, Ziolkowsky}}, title = {{{Phtoalexine als antimikrobielle Pflanzenwirkstoffe für die Kosmetik}}}, volume = {{140}}, year = {{2015}}, } @inproceedings{2375, abstract = {{Industrial wireless communication in license-free spectrum bands such as the 2.4-GHz-ISM band suffer from motion and multipath effects, which cause a high time- and frequency-variant channel attenuation. Additionally, mutual interference from heterogeneous wireless technologies limits real-time capabilities of industrial wireless technologies. Therefore, performance validations of industrial wireless technologies within appropriate industrial wireless environments are necessary. In this paper, we present the first raw measurement data set publication of an industrial wireless environment characterization in a data repository for free public access to enable transparent industrial wireless technology validation and to enhance their comparability. We characterize the whole license-free 2.4-GHz-ISM band with a time resolution of 110 μs and a frequency resolution of 1MHz in a coexistence scenario with four antennas obstructed by robot arm movements. Additionally, the frequency and time variance of the measured channel attenuations are analyzed.}}, author = {{Block, Dimitri and Fliedner, Niels Hendrik and Toews, Daniel and Meier, Uwe}}, booktitle = {{2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA)}}, isbn = {{9781467379298}}, keywords = {{Wireless communication, Wireless sensor networks, Antenna measurements, Attenuation measurement, Extraterrestrial measurements, Time-frequency analysis}}, location = {{ Luxembourg, Luxembourg}}, title = {{{Wireless channel measurement data sets for reproducible performance evaluation in industrial environments}}}, doi = {{10.1109/etfa.2015.7301599}}, year = {{2015}}, } @article{2386, author = {{Behler, Maximilian and Schulze, Christian and Schneider, Jan}}, issn = {{0341-7115 }}, journal = {{Brauindustrie}}, number = {{11}}, pages = {{92 -- 98}}, publisher = {{Sachon}}, title = {{{Hydrodynamische Effekte}}}, volume = {{100}}, year = {{2015}}, } @misc{2389, author = {{Kern, Simon and Platas-Barradas, Oscar and Pörtner, Ralf and Frahm, Björn}}, booktitle = {{Cytotechnology}}, issn = {{1573-0778}}, number = {{4}}, pages = {{1019--1032}}, publisher = {{Springer}}, title = {{{Model-based strategy for cell culture seed train layout verified at lab scale}}}, doi = {{10.1007/s10616-015-9858-9}}, volume = {{68}}, year = {{2015}}, } @article{2439, author = {{Upmann, Matthias and Grünewald, Tanja and Gerhadt, Thomas and Hildebrandt, Goetz}}, issn = {{0015-363X}}, journal = {{Fleischwirtschaft}}, number = {{8}}, pages = {{87--91}}, publisher = {{Dt. Fachverl.}}, title = {{{Gewebliche Beschaffenheit von Kochpökelwaren : ALTS-Laborvergleichsuntersuchung zur histologischen Quantifizierung von Strukturzerstörungen}}}, volume = {{93}}, year = {{2015}}, } @article{2597, author = {{Upmann, Matthias and Lade, P.}}, journal = {{Fleischwirtschaft}}, number = {{9}}, pages = {{109--112}}, title = {{{Knochenpartikel im Verarbeitungsfleisch für die Wurstproduktion}}}, volume = {{95}}, year = {{2015}}, } @inproceedings{2598, author = {{Lautenschläger, Ralf and Stiebing, Achim and Upmann, Matthias}}, location = {{Osnabrück}}, title = {{{Verarbeitungseigenschaften von Eberfleisch}}}, year = {{2015}}, } @inproceedings{2599, author = {{Upmann, Matthias}}, location = {{Garmisch-Partenkirchen}}, title = {{{Workshop Lebensmittelhistologie: Hackfleisch - Zerkleinerung}}}, year = {{2015}}, } @article{2600, author = {{Weyland, Gerd and Upmann, Matthias}}, issn = {{0015-363x}}, journal = {{Fleischwirtschaft}}, number = {{9}}, pages = {{84--86}}, title = {{{Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 2}}}, volume = {{95}}, year = {{2015}}, } @article{2601, author = {{Weyland, Gerd and Upmann, Matthias}}, issn = {{0015-363x}}, journal = {{Fleischwirtschaft}}, number = {{10}}, pages = {{60--63}}, title = {{{Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 3}}}, volume = {{95}}, year = {{2015}}, } @article{2602, author = {{Weyland, Gerd and Upmann, Matthias}}, issn = {{0015-363x}}, journal = {{Fleischwirtschaft}}, number = {{11}}, pages = {{51--53}}, title = {{{Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 4}}}, volume = {{95}}, year = {{2015}}, } @article{2603, author = {{Schulze, G. and Upmann, Matthias}}, journal = {{Food & Recht Praxis}}, number = {{4}}, pages = {{9--11}}, title = {{{Herkunftskennzeichnung von Fleisch}}}, year = {{2015}}, } @inproceedings{2604, author = {{Upmann, Matthias and Hölscher, Maike and Lautenschläger, Ralf and Zapp, Jürgen and Stiebing, Achim}}, location = {{Herrsching}}, title = {{{Verzicht auf die Kastration durch Ebermast oder Immunokastration. Herausforderungen aus Sicht der Produktqualität}}}, year = {{2015}}, } @article{2605, author = {{Langen, M. and Klein, G. and Schigulski, S. and Upmann, Matthias}}, journal = {{Fleischwirtschaft}}, number = {{12}}, pages = {{61--63}}, title = {{{Furculafleisch ist kein Separatorenfleisch}}}, volume = {{95}}, year = {{2015}}, } @book{2671, author = {{Noosten, Dirk}}, isbn = {{978-3-658-09985-5}}, pages = {{XVI, 207}}, publisher = {{Springer Vieweg}}, title = {{{Die private Bau- und Immobilienfinanzierung : Eine Einführung für Planer und Anbieter von Bauleistungen}}}, doi = {{10.1007/978-3-658-09986-2}}, year = {{2015}}, } @book{2684, author = {{Noosten, Dirk}}, isbn = {{978-3-9816586-1-3 }}, pages = {{156}}, publisher = {{Noosten Verlag}}, title = {{{Ratgeber Immobilienauswahl : suchen - beurteilen - kaufen }}}, year = {{2015}}, } @inproceedings{271, author = {{Austermann, Johann and Cepin, Simon and Borcherding, Holger}}, booktitle = {{PCIM Europe : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, Nuremberg, 19-21 May 2015 : proceedings / organizer: Mesago PCIM GmbH, Stuttgart, pcim-europe.com }}, isbn = {{978-3-8007-3924-0}}, keywords = {{Leistungselektronik, Erneuerbare Energien, Energiemanagement, Antrieb }}, location = {{Nürnberg}}, pages = {{1519--1526}}, title = {{{Compact and Cost-Efficient Power Regeneration System for Voltage Source Converters}}}, year = {{2015}}, } @article{2747, author = {{Dammann, Anna and Schwarzer, Knut and Müller, Ulrich and Schneider, Jan}}, isbn = {{978-3-418-00847-9}}, journal = {{ Brewing science}}, number = {{Yearbook}}, pages = {{10 -- 17}}, title = {{{Evaluation of the Acidic Sucrose Hydrolysis as Time-Temperature Integrator in Flash Pasteurizers}}}, volume = {{2014}}, year = {{2015}}, } @book{2774, author = {{Vetter, Andreas}}, isbn = {{9783766721488}}, keywords = {{Architektur / Innenarchitektur / Grundlagen der Raumgestaltung, Einbau, Einbaum{\}}, publisher = {{Callwey}}, title = {{{Raum-Ideen: Kreativatlas für Möbel und Einbauten}}}, year = {{2015}}, } @book{2775, author = {{Vetter, Andreas}}, isbn = {{0764348485}}, keywords = {{Einstellplatz, Garage, Haus}}, publisher = {{Schiffer Publishing}}, title = {{{Autotecture: Unique designs for the contemporary garage}}}, year = {{2015}}, } @misc{2819, author = {{Hernández Rodriguez, Tanja and Pörtner, Ralf and Frahm, Björn}}, booktitle = {{BMC proceedings / BioMed Central}}, issn = {{1753-6561}}, publisher = {{BioMed Central}}, title = {{{Considerations for cell passaging in cell culture seed trains}}}, doi = {{10.1186/1753-6561-9-s9-p43}}, volume = {{9}}, year = {{2015}}, } @misc{2820, author = {{Kern, Simon and Platas Barradas, Oscar and Schaletzky, Martin and Sandig, Volker and Frahm, Björn and Pörtner, Ralf}}, booktitle = {{BMC proceedings / BioMed Central}}, issn = {{1753-6561}}, publisher = {{BioMed Central}}, title = {{{Model-based strategy for cell culture seed train layout verified at lab scale}}}, doi = {{10.1186/1753-6561-9-s9-p44}}, volume = {{9}}, year = {{2015}}, } @misc{2917, author = {{Frahm, Björn and Pörtner, R. and Kern, S. and Hernández Rodriguez, Tanja}}, location = {{Frankfurt am Main, Germany}}, title = {{{Seed train design and optimization for animal cell suspension culture}}}, year = {{2015}}, } @misc{2919, author = {{Frahm, Björn and Hernández Rodriguez, Tanja and Kern, S. and Koopmann, K. S. and Beshay, U. and Platas-Barradas, O. and Pörtner, R.}}, location = {{Magdeburg, Germany}}, title = {{{Seed train design and optimization for animal cell suspension culture}}}, year = {{2015}}, } @inproceedings{2954, author = {{Materna, Daniel}}, location = {{Bremen}}, title = {{{Reanalysis for configurational changes}}}, year = {{2015}}, } @inproceedings{10224, abstract = {{Optical interconnects on printed circuit board level are a promising choice to support high bandwidth for short distance interconnects. These interconnects consists of highly multimode step index waveguides with rectangular core cross sections. Therefore ray tracing is an excellent method to determine the optical path parameters, e.g. optical power, ray path lengths and local ray directions. Based on these parameters the step response, the transient transfer function and the coupling behavior can be calculated. Classical ray tracing methods calculates the optical path parameters of each ray by successively computing internal reflections until a termination condition is reached. Therefore the computing time depends on the number of internal reflections. If the optical waveguide consists of cascaded straight and curved segments, e. g. point-to-point interconnects, one can use the analytic ray tracing method to determine the optical path parameters. The whole path parameters of each ray are determined by one analytical computation. The computing time depends on the number of segments. The analytic ray tracing method is unusable to determine ray path parameters of segments with varying core cross sections, e.g. tapers, crossings, splitters and combiners.}}, author = {{Stübbe, Oliver}}, booktitle = {{Optical Interconnects XVII}}, editor = {{Schröder, Henning and Chen, Ray T.}}, issn = {{0277-786X}}, location = {{San Francisco}}, publisher = {{SPIE}}, title = {{{Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections}}}, doi = {{10.1117/12.2076931}}, volume = {{9368}}, year = {{2015}}, } @article{1025, abstract = {{Coagulation is an essential process for the removal of suspended and colloidal material from water and wastewater. However, no comprehensive or universally accepted mathematical description of the process has been developed so far. Therefore, process optimization and control is usually based on data from jar tests and simple flow-proportional dosing concepts, while more accurate concepts based on water quality parameters that can be measured online are emerging. In addition, there have been attempts to develop software sensors and control schemes that involve advanced mathematical analyses of these parameters. The paper presents an overview of the parameters and physical sensors that are used for feed-forward and feed-backward control schemes and the experiences that have been made with their implementation. Moreover, the development and use of software sensors is described. Finally, the practical applications of different control techniques are given in order to illustrate the state of the art of coagulation control. Some thoughts about research needs conclude this review.}}, author = {{Ratnaweera, Harsha and Fettig, Joachim}}, issn = {{2073-4441}}, journal = {{Water}}, number = {{11}}, pages = {{6574--6597}}, title = {{{State of the Art of Online Monitoring and Control of the Coagulation Process}}}, doi = {{10.3390/w7116574}}, volume = {{7}}, year = {{2015}}, } @article{11572, abstract = {{The complex nature and difficult-to-establish aetiology of chronic pruritus (CP) makes it challenging to provide medical care for patients with CP. This challenge can only be met with a multidisciplinary approach. The first multidisciplinary Itch Centre in Germany was established at the University of Münster in 2002 to meet the needs of this patient population. More than 2,500 outpatients and 400 inpatients are diagnosed and receive treatment each year. To ensure evidence-based medical care, an electronic system for medical documentation and patient-reported outcomes was established. Automated data transfer to a research database enables comprehensive data analysis. Our translational research has characterized peripheral and central itch mechanisms, provided novel clustering of CP patients, and identified novel target-specific therapies (e.g. neurokinin 1 receptor-antagonist). The multidisciplinary approach, combined with basic, clinical and translational research, enables comprehensive medical care of patients as well as implementation of high-quality experimental and clinical studies. }}, author = {{Ständer, Sonja and Pogatzki-Zahn, Esther and Stumpf, Astrid and Fritz, Fleur and Pfleiderer, Bettina and Ritzkat, Anika and Bruland, Philipp and Lotts, Tobias and Müller-Tidow, Carsten and Heuft, Gereon and Pavenstädt, Hermann-Joseph and Schneider, Gudrun and Van Aken, Hugo and Heindel, Walter and Wiendl, Heinz and Dugas, Martin and Luger, Thomas A.}}, issn = {{0001-5555}}, journal = {{ Acta dermato-venereologica : a journal for clinical and experimental research in the field of dermatology and venereology}}, number = {{3}}, pages = {{266--271}}, title = {{{Facing the challenges of chronic pruritus: a report from a multi-disciplinary medical itch centre in Germany.}}}, doi = {{10.2340/00015555-1949 }}, volume = {{95}}, year = {{2015}}, } @article{11575, abstract = {{In the treatment of chronic pruritus-related, scratch-induced skin lesions the categorization, counting and temporal comparison are common methodologies. The observation requires a good memory and expertise in this field to gain comparable findings for this time-consuming process. Digital image processing aims at supporting such manual detections. The objective is to develop a software tool for automatic image detection and comparison. The new photographic setting implies the usage of markers to derive the brightness and size of lesions. MATLAB has been used for the software development. The newly defined setting allows taking standardized images of pruritus-associated cutaneous lesions for detection and comparison. The tool named PIACS (Prurigo Image Analyzing and Comparing System) allows automatically detecting, categorizing and comparing lesions based on digital images.}}, author = {{Bruland, Philipp and Hänse, Waldemar and Schedel, Fiona and Ständer, Sonja and Fritz, Fleur}}, issn = {{1879-8365}}, journal = {{Studies in health technology and informatics}}, pages = {{1042}}, publisher = {{IOS Press}}, title = {{{PIACS: A System for the Automatic Detection, Categorization and Comparison of Scratch-Related Skin Lesions in Dermatology.}}}, volume = {{216}}, year = {{2015}}, } @misc{11583, abstract = {{Background: It is unknown if health-related quality of life (HRQoL) differs between diseases associated with chronic pruritus (CP). Objective: To analyze HRQoL in relation to age, gender, skin lesions (primary vs. scratch-induced secondary) and itch intensity. Methods: Consecutive patients of our itch clinic were assessed with the Dermatology Life Quality Index (DLQI) and visual analogue scale (VAS). Results: In 510 CP patients (282 females; median age, 61.4 years), DLQI scores and VAS values were highly correlated, irrespective of the type of skin lesion. Overall, women had a lower HRQoL compared to men (females: 10.7 ± 6.7, males: 8.9 ± 6.7), but female gender was only associated with worse quality of life in patients <65 years old. Conclusion: HRQoL impairment in CP is highly influenced by pruritus intensity but not to the visible skin lesion or underlying cause. With limitations to item bias, DLQI is a suitable instrument for estimating quality of life impairment by CP.}}, author = {{Warlich, Benjamin and Fritz, Fleur and Osada, Nani and Bruland, Philipp and Stumpf, Astrid and Schneider, Gudrun and Dugas, Martin and Pfleiderer, Bettina and Ständer, Sonja}}, booktitle = {{Dermatology}}, issn = {{1421-9832}}, number = {{3}}, pages = {{253--259}}, publisher = {{S. Karger AG}}, title = {{{Health-Related Quality of Life in Chronic Pruritus: An Analysis Related to Disease Etiology, Clinical Skin Conditions and Itch Intensity}}}, doi = {{10.1159/000437206}}, volume = {{231}}, year = {{2015}}, } @misc{11584, abstract = {{Background Chronic pruritus is a frequently occurring symptom of various dermatoses that causes a high burden and impaired quality of life. An effective anti pruritic therapy is important for the patient, but its effectiveness is difficult to evaluate. Diverse methods and interpretations of pruritic metrics are utilized in clinical trials and the daily clinical practice in different countries, resulting in difficulties comparing collected data. Methods We founded a European Network on Assessment of Severity and Burden of Pruritus (PruNet) that is supported by the EADV. PruNet consists of 28 experts from 15 EU countries (21 dermatologists, 5 medical informaticists, 2 psychologists) and aims to unify the assessment of itch in routine dermatological care. Following a preliminary survey, a consensus conference was held in order to agree upon the prioritization of patient-reported outcome tools. Results Through utilizing the Delphi method, it was agreed that tools for measuring itch intensity (ex. the visual analogue scale) and quality of life (ex. ItchyQoL) are of primary importance and should urgently be foremost validated. Conclusion The validation and harmonization of standards are needed for the improvement of quality care for patients suffering from pruritic dermatoses. This summer, the first validation studies in several EADV member countries already began. }}, author = {{Ständer, S. and Zeidler, C. and Riepe, C. and Steinke, S. and Fritz, F. and Bruland, Philipp and Soto‐Rey, I. and Storck, M. and Agner, T. and Augustin, M. and Blome, C. and Dalgard, F. and Evers, A.W.M. and Garcovich, S. and Gonçalo, M. and Lambert, J. and Legat, F.J. and Leslie, T. and Misery, L. and Raap, U. and Reich, A. and Şavk, E. and Streit, M. and Serra‐Baldrich, E. and Szepietowski, J. and Wallengren, J. and Weisshaar, E. and Dugas, M.}}, booktitle = {{Journal of the European Academy of Dermatology and Venereology}}, issn = {{1468-3083}}, number = {{7}}, pages = {{1144--1147}}, publisher = {{Wiley-Blackwell }}, title = {{{European EADV network on assessment of severity and burden of Pruritus (PruNet): first meeting on outcome tools}}}, doi = {{10.1111/jdv.13296}}, volume = {{30}}, year = {{2015}}, } @misc{11771, editor = {{Hofmann, Martin Ludwig}}, issn = {{2566-8382}}, number = {{6}}, pages = {{142}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{52 Grad : Magazin, Stadtplanung }}}, year = {{2015}}, } @misc{10167, abstract = {{This paper discusses an alternative to common Powerline or Power-over-Ethernet applications, combining a 100BASE-TX-equivalent full duplex communication and simultaneous DC power transmission on one single twisted pair wire. The reduction of wires and connections can potentially ease the modularity and reconfigurability of industrial production installations, if the data communication offers a sufficiently high robustness against influences from the DC power transmission. This part of our research focuses on the necessary electrical adaptations between data and power circuitry and evaluates interference scenarios that are common for industrial fieldbus installations.}}, author = {{Wesemann, Derk and Dünnermann, Jens and Schaller, Marian and Banick, Norman and Witte, Stefan}}, booktitle = {{2015 IEEE World Conference on Factory Communication Systems (WFCS)}}, keywords = {{Wires, Transmission line measurements, Transceivers, Data communication, Power transmission lines, Wiring, Inductance}}, location = {{Palma de Mallorca, Spain}}, publisher = {{IEEE}}, title = {{{Less wires — A novel approach on combined power and ethernet transmission on a single, unshielded twisted pair cable}}}, doi = {{10.1109/WFCS.2015.7160588}}, year = {{2015}}, } @misc{12978, abstract = {{Diet change and fatness are supposed to challenge the immune system of the cow. Therefore, immunological and haematological consequences of adaptation to and continued feeding of a high-energy diet were studied in eight non-pregnant, non-lactating Holstein cows over 16 weeks. Blood haptoglobin concentration remained unaltered, suggesting that an acute phase reaction was not induced. Stimulation ability of peripheral blood mononuclear cells and stimulated oxidative burst capacity of granulocytes increased significantly in the course of the experiment after an initial drop. While total leucocyte counts increased, the proportion of granulocytes increased and that of lymphocytes decreased at the same time as the ratio of CD4+/CD8+ lymphocytes did. Capability of rumen microbes to detoxify the immune-modulating mycotoxin deoxynivalenol (DON) was not compromised as indicated by the exclusive presence of de-DON as the detoxified DON metabolite in blood. In conclusion, both diet change and prolonged positive energy balance influenced the bovine immune system.}}, author = {{Dänicke, Sven and Meyer, Ulrich and Winkler, Janine and Ulrich, Sebastian and Frahm, Jana and Kersten, Susanne and Valenta, Hana and Rehage, Jürgen and Häussler, Susanne and Sauerwein, Helga and Locher, Lena}}, booktitle = {{Archives of Animal Nutrition}}, issn = {{1477-2817}}, keywords = {{Dairy cowsdeoxynivalenol, energy consumption, functional responses, haematology, leucocytes, mycotoxins, zearalenone}}, number = {{1}}, pages = {{1--16}}, publisher = {{Taylor & Francis}}, title = {{{Haematological and immunological adaptations of non-pregnant, non-lactating dairy cows to a high-energetic diet containing mycotoxins}}}, doi = {{10.1080/1745039x.2015.1117561}}, volume = {{70}}, year = {{2015}}, } @inproceedings{5555, author = {{Broeker, Timo and Hoffarth, Marc and Schneider, Jan and Heikrodt, Klaus}}, location = {{Berlin}}, title = {{{ BioCO2nvert - Synergies of P2G und alcoholic CO2 for the efficient production of Methan and Bioethanol}}}, year = {{2015}}, } @inproceedings{5556, author = {{Broeker, Timo and Schneider, Jan and Otto, K.}}, location = {{Mertingen}}, title = {{{Energetische Verwertung von Trester aus der Fruchtsaftindustrie}}}, year = {{2015}}, } @inproceedings{5557, author = {{Schneider, Jan and Schwarzer, Knut and Dammann_, Anna and Müller, Ulrich}}, location = {{Porto (Portugal)}}, title = {{{Determination of Pasteurization Units in a flash pasteurizers under consideration of heating and cooling sections and the residence time distribution}}}, year = {{2015}}, } @article{5558, author = {{Schneider, Jan}}, journal = {{Getränkeherstellung Deutschland}}, publisher = {{Kuhn Fachverlag GmbH & Co. KG}}, title = {{{Heute noch unrentabel und morgen schon die große Chance}}}, year = {{2015}}, } @article{5559, author = {{Schwarzer, Knut and Dammann_, Anna and Schneider, Jan}}, journal = {{Brauwelt International VI}}, pages = {{S. 365--368}}, publisher = {{Fachverlag Hans Carl GmbH}}, title = {{{Testing Pasteurization Units}}}, year = {{2015}}, } @inproceedings{5560, author = {{Schneider, Jan and Schwarzer, Knut and Dammann_, Anna}}, location = {{Bremen}}, title = {{{Einsatz eines chemischen Indikators zur exakten Bestimmung der Pasteurisationseinheiten - ein Ersatz für den Count Reduction Test?}}}, year = {{2015}}, } @inproceedings{5561, author = {{Broeker, Timo and Blöhse, D. and Ramke, Hans-Günter and Schneider, Jan}}, location = {{Nice (Frankreich)}}, title = {{{How to extend a Distillery into a Lignocellulose Biorefinery}}}, year = {{2015}}, } @inproceedings{5562, author = {{Kothe, T. and Wiens, Anton and Kracht, A. and Kaetzel, M. and Rossmann, Sören and Rabenhorst, Jürgen}}, location = {{Nice (Frankreich)}}, title = {{{Characterization and Optimization of the Enzymatic Hydrolysis of Different Citrus Peel (Orange) Qualities.}}}, year = {{2015}}, } @inproceedings{5563, author = {{Hoffarth, Marc and Broeker, Timo and Wolff, V. and Mengendoth, C. and Heidkrodt, K. and Schneider, Jan}}, location = {{Nice (Frankreich)}}, title = {{{Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation}}}, year = {{2015}}, } @inproceedings{5564, author = {{Broeker, Timo and Hoffarth, Marc and Oppermann, L. and Wolff, V and Mengedoth, C. and Schneider, Jan}}, location = {{Nice (Frankreich)}}, title = {{{Wet Oxidation of Lignocellulosic Biomasses with Electrolytic produced Active Chlorine}}}, year = {{2015}}, } @inproceedings{5565, author = {{Schweizer, K. and Schneider, Jan}}, location = {{Berlin}}, title = {{{Wie groß ist der Beitrag der Aufheiz- und Abkühlzonen einer KZE für die Abtötung der MO oder Muss man die Aufheiz- und Abkühlzonen einer KZE die PE Berechnung einbeziehen? }}}, year = {{2015}}, } @article{5566, author = {{Behler, M. and Schulze, Christian and Schneider, Jan}}, journal = {{Brauindustrie 11}}, pages = {{S. 92--98}}, title = {{{Einsatz von Magnetrührwerken in Hefeanzuchtfermentern und deren Einfluss auf die Vitalität und Viabilität von Saccharomyces-Hefen}}}, volume = {{11}}, year = {{2015}}, } @article{5567, author = {{Pliske, Roland and Müller, Ulrich and Kohlus, R.}}, journal = {{Chemie-Ingenieur-Technik }}, number = {{7}}, pages = {{S. 1006--1010}}, title = {{{Untersuchungen zur Steigerung der Trocknungsgeschwindigkeit der Gefriertrocknung}}}, volume = {{87}}, year = {{2015}}, } @inproceedings{5683, author = {{Doria, Laura and dos Santos, Luara and Minge, Michael and Schöllig, Christina and Wahl, Michael}}, editor = {{Wienrich, Carolin and Zander, Torsten O. and Gramann, Klaus}}, location = {{Berlin}}, pages = {{213--216}}, publisher = {{Universitätsverlag der TU Berlin}}, title = {{{Bewegungsfähigkeit und Mobilität wiedererlangen "BeMobil": Die Mensch-Technik-Interaktion der Bewegungsrehabilitation}}}, volume = {{11}}, year = {{2015}}, } @inproceedings{5684, author = {{Minge, Michael and Lorenz, Katharina and Zach, Jelena and Trauzettel, Franziska and Gelgec, Özden}}, editor = {{Wienrich, Carolin and Zander, Torsten O. and Gramann, Klaus}}, location = {{Berlin}}, pages = {{229--233}}, publisher = {{Universitätsverlag der TU Berlin}}, title = {{{Partizipation in der Gestaltung motivationsfördernder therapeutischer Unterstützungssysteme: Ansätze, Methoden und Herausforderungen}}}, volume = {{11}}, year = {{2015}}, } @inproceedings{5685, author = {{Minge, Michael and Lorenz, Katharina and Dannehl, Susanne and Trauzettel, Franziska and Thüring, Manfred}}, editor = {{Weisbecker, Annette and Burmester, Michael and Schmidt, Albrecht}}, location = {{Stuttgard}}, pages = {{79--84}}, publisher = {{Oldenbourg Wissenschaftsverlag}}, title = {{{U(X) in Health Design. State-of-the-Art und Herausforderungen bei der nutzergerechten Gestaltung therapeutischer Unterstützungssysteme}}}, year = {{2015}}, } @inproceedings{5686, author = {{Trauzettel, Franziska and Minge, Michael and Thüring, Manfred}}, editor = {{Weisbecker, Annette and Burmester, Michael and Schmidt, Albrecht}}, location = {{Stuttgart}}, pages = {{85--91}}, publisher = {{Oldenbourg Wissenschaftsverlag}}, title = {{{Usability in medizintechnischen Softwarefirmen: Eine Interviewstudie zur aktuellen Lage}}}, year = {{2015}}, } @inproceedings{5687, author = {{Wagner, Ingmar and Minge, Michael}}, editor = {{Stephanidis, Constantine}}, pages = {{334--339}}, publisher = {{Springer International Publishing}}, title = {{{The Gods play dice together: The influence of social elements of gamification on seniors' user experience}}}, year = {{2015}}, } @techreport{5796, author = {{Friedrich, T. and Guhr, Nadine and Breitner, M.H.}}, title = {{{Führungsstile: Literaturrecherche und Ausblick für die Informationssicherheitsforschung}}}, volume = {{#70}}, year = {{2015}}, } @techreport{5797, author = {{Ammann, M. and Guhr, Nadine and Breitner, M.H.}}, title = {{{Design and Evaluation of a Mobile Security Awareness Campaign – A Perspective of Information Security Executives}}}, volume = {{#67}}, year = {{2015}}, } @article{5831, author = {{Hall, Oliver and Flore, G.}}, journal = {{Neue Mobilität }}, number = {{5}}, title = {{{Innovative e-Mobilitätsangebote im ländlichen Raum. Das Projekt elektrisch.mobil.owl. }}}, year = {{2015}}, } @inproceedings{585, abstract = {{Many low-cost 3D printers have been brought to market over the last couple of years. Most of them apply a Fused Layer Manufacturing (FLM) process, and have made 3D printing a great success amongst hobbyists, the maker community and students. One drawback of such inexpensive equipment is a limited build envelope, which prevents this from becoming a significant contributor to industrial production. To overcome these limits, it is not sufficient to simply upscale dimensions, but the overall concept of such machines must be completely re-thought, as well as the concepts behind several building blocks, components and the process software system. Problems such as shrinkage of build material, support material and machine parts in combination with long printer head travels, temperature distribution and moisture effects all have to be solved. In addition, larger parts need longer process times. Therefore, reduction of process times and an increase in productivity are necessary in order to enable economic production. Some of these problems can be solved by using more than one printer head for production, by using new materials and inventing new nozzle systems as distinct solutions for big printers. Nevertheless, to solve all these problems, the development of special machines for large parts is necessary: not component-wise but as a whole system. Large parts could then be successfully produced in several industries, using large, inexpensive FLMmachines. }}, author = {{Villmer, Franz-Josef and Witte, Lars}}, booktitle = {{Production Engineering and Management}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-941645-11-0}}, keywords = {{3D printing, FLM, build envelope, large-scale, thermoplastic polymers}}, location = {{Trieste, Italy}}, number = {{1}}, pages = {{111--122}}, title = {{{Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself}}}, year = {{2015}}, } @misc{5855, author = {{Arztmann, Daniel}}, title = {{{Konstruktion}}}, year = {{2015}}, } @inproceedings{588, abstract = {{While common measurement techniques like gloss or color measurement are widely used in industry for quality assessment of furniture high gloss surfaces, they indicate only a weak correlation to the quality perceived by the customer. Topography based approaches achieve higher correlation to human perception but are often based on linear measurement which cannot be applied for an overall assessment of larger surfaces. Thus an algorithm was developed to calculate a specific value based on topographic features, such as orange peel, within the research project ‘Development of a comprehensive quality concept for furniture high gloss surfaces’, funded by the federal Ministry of Education and Research. For the evaluation of short waved structures on furniture high gloss surfaces the ratio of hill height to hill area was chosen. This parameter proves to be applicable for an evaluation of the extent of a single. }}, author = {{Huxol, Andrea and Riegel, Adrian and Dekomien, Kerstin}}, booktitle = {{Production Engineering and Management}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-941645-11-0}}, keywords = {{High gloss, surface measurement, topographic features, quality assessment}}, location = {{Trieste, Italy}}, number = {{1}}, pages = {{99--110}}, title = {{{Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception}}}, year = {{2015}}, } @inproceedings{5886, author = {{Häusler, Axel}}, location = {{Höxter}}, title = {{{GIS & mehr – Methoden der Informatik für (ländliche) Räume}}}, year = {{2015}}, } @inproceedings{5895, author = {{Sachs, Hans}}, booktitle = {{Fassade 2015 an der Technischen Hochschule Ostwestfalen Lippe, Detmold, 27.11.2015}}, location = {{Detmold}}, publisher = {{Technischen Hochschule Ostwestfalen-Lippe}}, title = {{{It’s all Prototypes : Vortrag}}}, year = {{2015}}, } @inproceedings{5896, author = {{Sachs, Hans}}, booktitle = {{Real time : extending the reach of computation : eCAADe 2015 : proceedings of the 33rd International Conference on Education and Research in Computer Aided Architectural Design in Europe : 16-18 September 2015, Vienna, Austria, Faculty of Architecture and Regional Planning }}, editor = {{Martens, Bob and Wurzer, Gabriel and Grasl, Thomas and Lorenz, Wolfgang E. and Schaffranek, Richard }}, isbn = {{978-94-912070-9-9}}, location = {{Wien}}, publisher = {{Liverpool School of Architecture, University of Liverpool}}, title = {{{Design= Production}}}, volume = {{2}}, year = {{2015}}, } @inproceedings{597, abstract = {{This paper is aimed to discuss current research using data mining techniques and industry statistics in production environments. The general research approach is based on the idea of using data mining processes and techniques of industry statistics to find rare and hidden patterns behind failures of complex components. A case study will be applied to illustrate how the technique is carried out and where the limits of this approach occur. The case study deals with a component supplier of printing machines, which received an increasing number of client complaints, all related to one distinct problem. The observed failures seem to occur only among clients with very high quality standards. The affected component undergoes a very complex production process with several steps in different departments. Every single production unit records data information from multiple process variables and at different points in time. In the beginning there was no understanding of the failure causes in production at all. Therefore a huge amount of production data had to be analyzed to find the pattern that discloses the failure. The data mining process starts with a first step in which the given data sets are prepared and then cleaned. Followed up by building a prediction model. The aim is to detect the root causes for failures and to predict potential failures in affected components. This paper shows how to use data mining to get the answer on pressing production failures. }}, author = {{Scheideler, Eva and Ahlemeyer-Stubbe, Andrea}}, booktitle = {{Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-941645-11-0}}, keywords = {{Data mining, production failure, multi-variant analysis, multivariate process control, predictive modelling, case study}}, location = {{Trieste, Italy}}, number = {{1}}, pages = {{163--174}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Data Mining: A Potential Detector to Find Failure in Complex Components}}}, year = {{2015}}, } @inproceedings{598, abstract = {{The aerospace sector is characterized by long product life cycles and a need for lightweight design. Additive manufacturing is a technology that produces parts layer by layer and thus enables the manufacturing of any complex parts at nearly no extra costs. A topology optimization enhances the part’s performance for their special purpose. The results are often complex bionic structures that cannot be produced with conventional manufacturing technologies. The paper analyzes how the high potential of this technologycan be applied to aerospace parts. A topology optimization will be conducted for an aircraft part explaining the crucial points and a life cycle analysis examines the achieved sustainable improvements for the aircraft’s life cycle. }}, author = {{Huxol, Andrea and Villmer, Franz-Josef}}, booktitle = {{Production Engineering and Management}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-941645-11-0}}, keywords = {{Additive manufacturing, topology optimization, aerospace, life cycle costs}}, location = {{Trieste, Italy}}, number = {{1}}, pages = {{207--218}}, title = {{{Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies}}}, year = {{2015}}, } @inproceedings{599, abstract = {{Order picking has long been identified as the most labor costly and intensively activity in warehouse management. The orders from the customers need to be fulfilled tightly and timely. In order to keep the required high service level, the warehouse has to increase the picking productivity under the constraints of limited capacity. This paper concerns a man-togoods order picking system, in which the order pickers have to drive with a pallet jack to the storage locations. Considering that the orders are mostly small orders which consist of less lines, it is efficient to combine severalsingle customer orders into one picking order. Under this circumstance, this paper intends to answer the question of how customer orders should be grouped into picking orders with the aim of minimizing the total travel length through the warehouse. Consequently the productivity of the order picking system can be improved. An optimization problem for order batching is introduced. The optimization method of order batching is then proposed. Based on the simulation of different scenarios of incoming orders, it can be concluded that the developed method is effective in improving the productivity of the concerned order picking system. }}, author = {{Li, Li and Schulze, L.}}, booktitle = {{Production Engineering and Management}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-941645-11-0}}, keywords = {{Order picking, man-to-goods, order batching, picking productivity, genetic algorithm}}, location = {{Trieste, Italy}}, number = {{1}}, pages = {{319--326}}, title = {{{Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching}}}, year = {{2015}}, } @misc{6156, author = {{Müller, Ulrich and Ollesch, K.}}, title = {{{Verfahren und Vorrichtung zum Reinigen eines Mischers}}}, year = {{2015}}, } @article{6208, author = {{Pliske, Roland and Müller, Ulrich and Kohlus, R.}}, journal = {{Ingenieur-Technik }}, number = {{7}}, pages = {{1006--1010}}, title = {{{Untersuchungen zur Steigerung der Trocknungsgeschwindigkeit der Gefriertrocknung}}}, volume = {{87}}, year = {{2015}}, } @proceedings{6211, editor = {{Song, Jian}}, isbn = {{978-3-00-048824-5}}, location = {{Lemgo}}, pages = {{239}}, publisher = {{Labor für Feinsystemtechnik, Hochschule Ostwestfalen-Lippe}}, title = {{{Elektrische und optische Verbindungstechnik 2015 : Tagungsband der GMM-Fachtagung : 5. Symposium Connectors}}}, year = {{2015}}, } @article{6250, author = {{Song, Jian and Koch, Ch.}}, journal = {{Galvanotechnik}}, pages = {{1431 -- 1441}}, title = {{{Optimierung von Goldoberflächen elektrischer Kontaktsysteme auf Verschleißbeständigkeit}}}, volume = {{7}}, year = {{2015}}, } @article{6251, author = {{Song, Jian and Schinow, Vitali and Yuan, Haomiao}}, journal = {{International Journal of Fracture Fatigue and Wear}}, pages = {{200 -- 207}}, title = {{{The Influence of Coating Thickness on Linear Wear Rate in Silver Coated Contacts}}}, volume = {{3}}, year = {{2015}}, } @inproceedings{6295, author = {{Blauth, Michael and Berger, F. and Song, Jian}}, booktitle = {{Tagungsband der VDE/VDI-GMM-Fachtagung „Symposium Connectors“}}, location = {{Lemgo}}, pages = {{68 -- 82}}, title = {{{Untersuchung zum Einfluss der natürlichen Konvektion auf die Erwärmung von Kontaktsystemen}}}, year = {{2015}}, } @inproceedings{6296, author = {{Kösters, J. and Song, Jian}}, booktitle = {{Tagungsband der VDE/VDI-GMM-Fachtagung „Symposium Connectors“}}, location = {{Lemgo}}, pages = {{26 -- 34}}, title = {{{Einfluss der Schichtdicke auf die Lebensdauer, den Reibungskoeffizienten und die Verschleißrate von Kontakten mit Silberschicht}}}, year = {{2015}}, } @inproceedings{6308, author = {{Song, Jian and Schinow, Vitali and Yuan, Haomiao}}, booktitle = {{Proceedings of 11th Arnold Tross Colloquium}}, location = {{Hamburg}}, title = {{{The Influence of Coating Thickness on Linear Wear Rate in Silver Coated Contacts}}}, year = {{2015}}, } @inproceedings{6319, author = {{Song, Jian and Schinow, Vitali and Yuan, Haomiao}}, booktitle = {{Proceedings of the 42th Leeds-Lyon Symposium on Tribology}}, location = {{Lyon, France}}, pages = {{82}}, title = {{{THE LINEAR WEAR RATE OF A COATED CONTACT BETWEEN A SPHERE AND A FLAT SURFACE}}}, year = {{2015}}, } @inproceedings{6320, abstract = {{Für die konstruktive Auslegung von individuellen Steckverbinderkontakten sind skalierbare Baureihen, angepasste Gebrauchseigenschaften und eine grenzwertige Auslegungen wünschenswert. Um diesen Herausforderungen zu begegnen, wird im Rahmen dieser Studie ein systematisches Vorgehen zur konstruktiven Auslegung von Steckverbinderkontakten für die Leistungsübertragung vorgestellt. Am Beispiel einer thermischen Dimensionierung wird gezeigt, wie in der Phase der Grobgestaltung die wesentlichen geometrisch-stofflichen Parameter mit Hilfe von verschiedenen parametrisierten Modellen festgelegt werden können. Dadurch können Steckverbindersysteme mit optimiertem Erwärmungsverhalten entwickelt werden. }}, author = {{Blauth, Michael and Berger, Frank and Song, Jian}}, booktitle = {{ Kontaktverhalten und Schalten}}, editor = {{Berger, Frank}}, isbn = {{978-3-8007-4092-5}}, location = {{Karlsruhe}}, pages = {{54 -- 62}}, publisher = {{VDE-Verl. }}, title = {{{Parametrisierte Modelle zur Grobdimensionierung von Steckverbinderkontakten für die Leistungsübertragung}}}, volume = {{71}}, year = {{2015}}, } @inproceedings{6484, author = {{Song, Jian and Yuan, Haomiao and Schinow, Vitali}}, booktitle = {{Proceedings of Expertenworkshop Galvano- und Oberflächentechnik für Elektronikanwendungen}}, location = {{Berlin}}, title = {{{Einfluss der Silberschichtdicke elektrischer Kontakte auf die lineare Verschleißrate und die Lebensdauer}}}, year = {{2015}}, } @inbook{6657, author = {{Kalkman, V. J. and Lohr, Mathias}}, booktitle = {{Atlas of the European dragonflies and damselflies}}, editor = {{Boudot, J.-P. and Kalkman, V. J.}}, pages = {{265 -- 267}}, publisher = {{KNNV}}, title = {{{Leucorrhinia rubicunda (Linnaeus, 1758)}}}, year = {{2015}}, } @inbook{6658, author = {{Kalkman, V. J. and Lohr, Mathias}}, booktitle = {{Atlas of the European dragonflies and damselflies}}, editor = {{Boudot, J.-P. and Kalkman, V. J.}}, pages = {{232 -- 233}}, publisher = {{KNNV}}, title = {{{Cordulia aenea (Linnaeus, 1758)}}}, year = {{2015}}, } @article{6659, author = {{Lohr, Mathias}}, issn = {{0723-6514}}, journal = {{Libellula : Zeitschrift der Gesellschaft deutschsprachiger Odonatologen (GdO) e.V. }}, number = {{Libellula Supplement 14}}, pages = {{98 -- 101}}, title = {{{Erythromma lindenii (Selys, 1840)}}}, year = {{2015}}, } @article{6660, author = {{Ott, J. and Conze, K.-J. and Günther, Alicia and Lohr, Mathias and Mauersberger, R. and Roland, H.-J. and Suhling, F.}}, issn = {{0723-6514}}, journal = {{Libellula : Zeitschrift der Gesellschaft deutschsprachiger Odonatologen (GdO) e.V. }}, number = {{Libellula Supplement 14}}, pages = {{395 -- 422}}, title = {{{Rote Liste und Gesamtartenliste der Libellen Deutschlands mit Analyse der Verantwortlichkeit}}}, volume = {{2}}, year = {{2015}}, } @article{6664, author = {{Lohr, Mathias and Mauersberger, R. and Brockhaus, T.}}, issn = {{0723-6514}}, journal = {{Libellula : Zeitschrift der Gesellschaft deutschsprachiger Odonatologen (GdO) e.V. }}, number = {{Libellula Supplement 14}}, pages = {{146 -- 149}}, title = {{{Aeshna isoceles (Müller, 1767)}}}, year = {{2015}}, } @article{6665, author = {{Clausnitzer, H.-J. and Lohr, Mathias}}, issn = {{0723-6514}}, journal = {{Libellula : Zeitschrift der Gesellschaft deutschsprachiger Odonatologen (GdO) e.V. }}, number = {{Libellula Supplement 14}}, pages = {{178 -- 181}}, title = {{{Boyeria irene (Fonscolombe, 1838)}}}, year = {{2015}}, } @article{6666, author = {{Lohr, Mathias and Martens, A. and Weihrauch, F.}}, issn = {{0723-6514}}, journal = {{Libellula : Zeitschrift der Gesellschaft deutschsprachiger Odonatologen (GdO) e.V. }}, number = {{Libellula Supplement 14}}, pages = {{182 -- 185}}, title = {{{Brachytron pratense (Müller, 1764)}}}, year = {{2015}}, } @article{6667, author = {{Lohr, Mathias}}, issn = {{0723-6514}}, journal = {{Libellula : Zeitschrift der Gesellschaft deutschsprachiger Odonatologen (GdO) e.V. }}, number = {{Libellula Supplement 14}}, pages = {{310 -- 313}}, title = {{{Sympetrum flaveolum (Linnaeus, 1758)}}}, year = {{2015}}, } @article{6668, author = {{Moritz, R. and Roland, H.-J. and Lohr, Mathias}}, issn = {{0723-6514}}, journal = {{Libellula : Zeitschrift der Gesellschaft deutschsprachiger Odonatologen (GdO) e.V. }}, number = {{Libellula Supplement 14}}, pages = {{318 -- 321}}, title = {{{Sympetrum meridionale (Selys, 1841)}}}, year = {{2015}}, } @article{6838, abstract = {{Für den Erfolg in Studium und Beruf ist aktuelles und methodisches Wirtschaftswissen das A und O. Die Zeitschrift WiSt liefert dieses Wissen Monat für Monat. Hochaktuelle Wirtschaftsthemen werden vor dem Hintergrund der volks- und betriebswirtschaftlichen Modelle erörtert und diskutiert. So bleiben Sie up-to-date, kennen die brisanten Details und durchschauen schnell komplexe Wirtschaftsstrukturen.}}, author = {{von Blanckenburg, Korbinian}}, issn = {{0340-1650}}, journal = {{WiSt - Wirtschaftswissenschaftliches Studium}}, number = {{11}}, pages = {{631--632}}, publisher = {{Beck}}, title = {{{Die Regressionsanalyse bei trendbehafteten Zeitreihen}}}, doi = {{10.15358/0340-1650-2006-11-631}}, volume = {{35}}, year = {{2015}}, } @inproceedings{687, author = {{Büttner, Sebastian and Sand, Oliver and Röcker, Carsten}}, booktitle = {{Proceedings of the 17th International Conference on Human-Computer Interaction with Mobile Devices and Services Adjunct}}, isbn = {{978-1-4503-3653-6}}, keywords = {{Augmented Reality, Manufacturing, Mobile Projection}}, location = {{Kopenhagen, Denmark}}, pages = {{1130--1133}}, publisher = {{ACM}}, title = {{{Extending the Design Space in Industrial Manufacturing Through Mobile Projection}}}, doi = {{10.1145/2786567.2794342}}, year = {{2015}}, } @article{688, abstract = {{In this paper, we analyze the specific requirements of interacting with cyber-physical systems and propose a design approach that is driven by user needs and makes use of an expanded toolbox that contains state-of-the-art interaction technologies including Smart Glasses and Wearables. We present several examples of assistance systems in industrial production that use these interaction technologies and discuss the corresponding usability and implementation aspects. }}, author = {{Paelke, Volker and Röcker, Carsten and Koch, Nils and Flatt, Holger and Büttner, Sebastian}}, issn = {{2196-677X}}, journal = {{at - Automatisierungstechnik}}, keywords = {{User centred design, user interfaces, user expe-rience, cyber-physical systems, smart glasses, wearables}}, number = {{10}}, pages = {{833--843}}, publisher = {{De Gryter Oldenbourg}}, title = {{{User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox}}}, doi = {{10.1515/auto-2015-0016}}, volume = {{63}}, year = {{2015}}, } @phdthesis{6901, abstract = {{Es werden Phänomene während der Deformation von nanokristallinen (nc) Übergangsmetallen untersucht, die unter bestimmten tribologischen Beanspruchungsszenarien auftreten. Hauptsächlich findet hierfür die Methodik der Molekulardynamik-Simulation (MD) Anwendung. Es werden mehrfach Vergleiche zu Experimenten hergestellt. Die Verallgemeinerung der Ergebnisse auf andere Metalle und Polykristalle, auch andere Längenskalen und Dehnraten, wird diskutiert. Es wird gezeigt, dass die Faltenbildung bei der Furchung einer glatten nc Metalloberfläche ohne geometrische Einschränkungen eine kristallplastische Ursache hat. Dies widerspricht bisherigen Berichten, die eine fluiddynamische Ursache angeben. In dieser Arbeit wird ein neues Modell eingeführt, mit welchem die polykristalline Grundstruktur hinsichtlich ihres Fließverhaltens differenziert wird. Damit wird erklärbar, warum Faltensenken mit Oberflächendefekten zusammenfallen. Das Modell projiziert das atomare Gleitsystem auf die Indenterschneide und erlaubt damit die Identifizierung von „weichen“ und „harten“ Körnern oder Zwillingen. Damit erhalten bisherige Theorien zur Faltenbildung, basierend auf kontinuumsmechanischen Mehrphasenmodellen, eine physikalisch nachvollziehbare Grundlage. Die Faltenstruktur auf atomarer Ebene zeigt frappierende Ähnlichkeit mit rasterkraftmikroskopischen (AFM) Furchungsexperimenten an mikrokristallinem Kupfer. Da der Ursprung des Faltungsvorgangs als kristallographisch angegeben wird, ist eine Verallgemeinerung auf metallische Polykristalle naheliegend. Falteneinschluss wird in Zusammenhang mit der Bildung von lamellaren Verschleißpartikeln gebracht. Bei der Reibung von puren nc Metalloberflächen dominieren Mechanismen der Kornvergröberung gegenüber denen der Kornfeinung. Bisherige Literaturberichte machten diesbezüglich heterogene Aussagen. Die extern aufgebrachte Scherung wird zunächst über Kristallgitterumorientierung, später über stark lokalisierte Nanoscherbänder (NSB) und optimal ausgerichtete Gleitsysteme akkomodiert. Eine Abwandlung von obigem Modell mit Projektion auf das Schersystem macht dies sichtbar. Der für die Kornfeinung wichtige Prozess der Kontinuierlichen Dynamischen Rekristallisation (CDRX) wird zum ersten Mal in situ auf atomarer Ebene sichtbar gemacht. Damit wird die Literaturvorstellung von der CDRX bestätigt, welche aus ex situ Analysen von tribologischen Experimenten gewonnen wurde. Die Untergrenze für das Operieren von CDRX wird auf eine Korngröße von etwa 5 nm herabgesetzt. Legierungspotentiale für Au-Ni-Co werden basierend auf Lösungsenthalpien entwickelt. Damit wird gezeigt, dass die Zugabe von bis zu 10 Atom-% Kobalt zu nc Gold zu keiner signifikanten Erhöhung der Scherfestigkeit führt, in Übereinstimmung mit experimentellen Ergebnissen und theoretischen Vorhersagen der Literatur. Kobalt scheint jedoch die Bildung von NSBs zu begünstigen. Außerdem wird verringerte Duktilität, Texturierung und Aufrauung bei Asperitenkollision beobachtet. Einzelne Deformationsmechanismen werden während der athermischen, homogenen Festkörperscherung von nc Gold manuell gezählt. Die relativen quantitativen Vorkommen sind nicht im Widerspruch zu theoretischen Vorhersagen der Literatur zu metallischen Polykristallen basierend auf Defektenergien. Trotz des bekannten Wechsels in den Deformationsmechanismen, könnten diese Vorhersagen damit auch Gültigkeit für Nanokristalle behalten. Es wird gezeigt, dass initiale Bruchstückbildung bei der einmaligen Kollision von metallischen Nanoasperiten nicht ohne geeignete nicht-metallische Oberflächenbelegung möglich ist. Entweder brechen keine Bruchstücke ab oder sie haften durch Metalladhäsion wieder an. Bruchstückbildung wird mit einem Wassermodell erzielt und nicht mit Alkanen. Es wird spekuliert, ob die Ursache dafür eine tensidische Wirkung der Oberflächenbelegung auf abreißende Asperitenbrücken ist. In einem Exkurs werden die Parameter eines einfachen, kontinuumsmechanischen, elastoviskoplastischen Materialmodells jeweils an eine Nanoindentation in nc Gold in MD-Simulation und Experiment angepasst. MD und Experiment unterscheiden sich hierbei um etwa 8 Größenordnungen (GO) in den Dehnraten und 2 GO in den Längenskalen. Die Nutzung der Modellparameter über die GO hinweg führt zu unterschiedlichen Spannungsantworten. Innerhalb der MD ist ein Transfer um 1 GO in der Länge und 2 GO in der Dehnrate möglich. Das nicht-idente Materialverhalten zwischen MD und Experiment wird hauptsächlich auf den Dehnratenunterschied zurückgeführt.}}, author = {{Beckmann, Nils}}, pages = {{215}}, title = {{{Atomistische Simulation tribologischer Elementarprozesse bei nanokristallinen Übergangsmetallen}}}, doi = {{10.6094/UNIFR/10164}}, year = {{2015}}, } @article{723, abstract = {{Vor dem Hintergrund des Trends steigender Gemeinkosten im Fertigungs- und Verwaltungsbereich ist der Anwendung von Methoden des Gemeinkostenmanagements eine zunehmende Bedeutung beizumessen. Im Rahmen dieses Beitrags werden bestehende Methoden kurz erläutert und beurteilt. Im Anschluss daran wird ein neuer, ergänzender Ansatz des Gemeinkostenmanagements auf Basis von Elastizitätskennzahlen anhand eines Fallbeispiels vorgestellt und erläutert.}}, author = {{Hinrichsen, Sven}}, issn = {{0935-0381}}, journal = {{Controlling}}, number = {{6}}, pages = {{328--333}}, publisher = {{C.H. Beck}}, title = {{{Gemeinkostenmanagement über Elastizitätskennzahlen}}}, doi = {{10.15358/0935-0381_2014_6_328}}, volume = {{26}}, year = {{2015}}, } @misc{7481, author = {{Jandt, Dennis}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Entwicklung einer SmartCard-basierten Multiuserapplikation für TrueCrypt}}}, year = {{2015}}, } @misc{7483, author = {{Harring, Felix}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Unified Data Gateway - eine selbstkonfigurierende modulare Middleware für Automatisierungskomponenten}}}, year = {{2015}}, } @misc{7484, author = {{Sandeep Reddy, Dareddy}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Elliptic Curve Cryptography in Transport Layer Security}}}, year = {{2015}}, } @misc{7485, author = {{Nickel, Alexander}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Entwicklung eines dynamischen ViewModel-Generators im Kontext des MVVM-Schemas}}}, year = {{2015}}, } @misc{7647, author = {{Köhler, Martin and Hothan, Jürgen}}, booktitle = {{Konferenz "Verkehrsökonomik und -politik" der TU Berlin am 11./12.06.2015; Berlin}}, location = {{Berlin}}, publisher = {{Zeitschrift für Verkehrswissenschaft (ZfV)}}, title = {{{Achslastdaten von Kraftfahrzeugen für die Kostenallokation}}}, year = {{2015}}, } @misc{7713, author = {{Köhler, Martin}}, booktitle = {{6. Detmolder Verkehrstag am 18.06.2015 zum Thema "Pflasterdecken und Plattenbeläge - Neuerungen bei Bauprodukten und im Technischen Regelwerk"}}, location = {{Detmold}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Entwicklungen im Technischen Regelwerk für Pflasterdecken und Plattenbeläge}}}, year = {{2015}}, } @misc{7858, author = {{Lahdo, Rabi and Seffer, Oliver and Springer, André and Kaierle, Stefan and Collmann, Mareike and Schaumann, Peter}}, booktitle = {{Stahlbau}}, issn = {{0038-9145}}, number = {{12}}, pages = {{1016--1022}}, publisher = {{Wiley}}, title = {{{Laserstrahl-MSG-Hybridschweißen von Feinkornbaustählen für den Einsatz im Stahlbau}}}, doi = {{10.1002/stab.201510344}}, volume = {{84}}, year = {{2015}}, } @misc{7859, author = {{Behm, Velten and Hoffmann, Gerd-Albert and Trzebiatowski, Jürgen von and Springer, André and Kaierle, Stefan and Overmeyer, Ludger}}, booktitle = {{Journal of Laser Applications}}, issn = {{1042-346X}}, publisher = {{Laser Institute of America (LIA)}}, title = {{{Method for evaluating the behavior of laser welded dissimilar material seams in single overlap configuration under impact loads by the example of twinning induced plasticity steels}}}, doi = {{10.2351/1.4906384}}, year = {{2015}}, } @misc{9120, author = {{Tasić, Vladimir }}, isbn = {{978-3-945059-29-6}}, pages = {{93}}, publisher = {{e-enterprise}}, title = {{{Badious Logiken: Mathe, Hamlet, Sade}}}, volume = {{5}}, year = {{2015}}, } @misc{9121, author = {{Tasić, Vladimir}}, isbn = {{978-3-945059-25-8}}, pages = {{117}}, publisher = {{e-enterprise}}, title = {{{Mathematik und revolutionäre Theorie : von Castoriadis bis Badiou}}}, volume = {{4}}, year = {{2015}}, } @misc{922, author = {{Trewin, Patrick}}, pages = {{52}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Betrieb eines neugegründeten Musiklabels mit Fokus auf Vermarktung und Vertrieb}}}, year = {{2015}}, } @misc{924, author = {{Demir, Michael Thomas}}, pages = {{51}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Betrieb eines neugegründeten Musiklabels mit Fokus auf Produktion und Entwicklung}}}, year = {{2015}}, } @misc{928, author = {{Adams, Meelah}}, pages = {{100}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Die Macht von Virals. Konzipierung, Realisierung und Auswertung von viralen Spots für den Roman 'Fuck you Zombie'}}}, year = {{2015}}, } @misc{930, author = {{Hörnlein, Rebecca}}, keywords = {{Roller Derby}}, pages = {{49}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{"Auf die Fresse, fertig, los" : Entwicklung und Produktion eines Hörfunkfeatures für eine Jugendwelle}}}, year = {{2015}}, } @misc{931, author = {{Gausemeier, Catharina}}, keywords = {{Hochschulfernsehen, Livefernsehen, Produktion}}, pages = {{154}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Zeilensprung.tv - Ein Handbuch}}}, year = {{2015}}, } @misc{933, abstract = {{Diese Arbeit bitte nur gesperrt veröffentlichen (bzw. nur das Inhaltsverzeichnis) und damit nur den Prüfern und Prüferinnen sowie den Mitgliedern des Prüfungsausschusses zugänglich machen.}}, author = {{Palka, Peter}}, keywords = {{Social Spot}}, pages = {{48}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{STAY - DREHBUCH UND REGIE EINES SOCIAL SPOTS}}}, year = {{2015}}, } @misc{937, author = {{Lücking, Marcus}}, keywords = {{Design, Graphik, Traum}}, pages = {{178}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Somniatis}}}, year = {{2015}}, } @proceedings{9649, editor = {{Pottgiesser, Uta and Hemmerling, Marco and Böke, Jens}}, isbn = {{ 978-3-939349-23-5 }}, location = {{Detmold}}, publisher = {{ Hochschule OWL }}, title = {{{ Facade 2015 - computational optimisation. Nov. 29th : ConstructionLab }}}, volume = {{1}}, year = {{2015}}, } @misc{9758, author = {{Stemmer, Boris}}, booktitle = {{Peer reviewed proceedings of digital landscape architecture 2015 : at Anhalt University of Applied Sciences}}, editor = {{Buhmann, Erich}}, isbn = {{978-3-87907-555-3}}, location = {{Dessau}}, pages = {{290 -- 297}}, publisher = {{Wichmann}}, title = {{{Cooperative landscape assessment using Web-GIS Technology}}}, year = {{2015}}, } @misc{9768, author = {{Rehhausen, Anke and Geißler, Gesa and Köppel, Johann and Scholles, Frank and Putschky, Magrit and Syrbe, Ralf-Uwe and Magel, Ina and Albrecht, Juliane and Stemmer, Boris and Wende, Wolfgang and Hoppenstedt, Adrian}}, booktitle = {{UVP-Report}}, issn = {{0933-0690}}, number = {{4}}, pages = {{96--102}}, publisher = {{UVP-Gesellschaft e.V.}}, title = {{{SUP-Qualitätskriterien: Ansprüche an eine Strategische Umweltprüfung}}}, volume = {{29}}, year = {{2015}}, } @misc{9777, author = {{Feliu, Efren and Garcia, Gemma and Hage, Gottfried and Bruns, Diedrich and Stemmer, Boris and Paech, Florian and Rasmussen, Ole Rassmus and Greve Harbo, Lisbeth and Berlina, Anna and Fredricsson, Christian and Perjo, Liisa and Weber, Ryan and Pedroli, Bas and Schröder, Rob and Jiménez, José María and Munárriz, Dámaso and Sepec Jersic, Mateja and Marega, Milena and Koron, Blanka}}, publisher = {{ESPON}}, title = {{{LIVELAND: Liveable landscapes: a key value for sustainable territorial development: Final Report}}}, year = {{2015}}, } @book{7883, author = {{Kracht, Dietmar and Kaierle, Stefan and Springer, André and Seffer, Oliver and Lahdo, Rabi and Nacke, B. and Schülbe, H. and Neumeyer, J. and Schaumann, P and Collmann, M}}, isbn = {{978-3-942541-58-9}}, pages = {{191}}, publisher = {{Verl. und Vertriebsges.}}, title = {{{Prozesssicheres und leistungsstarkes Fügen von hochfesten Feinkornbaustählen durch ein Hybridschweißverfahren mit integrierter Vorwärmung}}}, volume = {{P 838}}, year = {{2015}}, } @misc{7889, author = {{Ross, J. and Nothdurft, S. and Stonis, M. and Springer, André and Kaierle, S. and Behrens, B.-A.}}, booktitle = {{Tagungsband T 40 - Intermezzo der hybriden Werkstofflösungen: Hat Blech eine Zukunft?}}, isbn = {{978-3-86776-452-0}}, location = {{Bad Boll}}, pages = {{175–184}}, publisher = {{EFB}}, title = {{{Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl-Alu-minium-Mischverbindungen für den automobilen Leichtbau}}}, year = {{2015}}, } @misc{7942, author = {{Müller, Stefan and Stawinoga, Martin and Velte, Patrick}}, booktitle = {{ZfU: Zeitschrift für Umweltpolitik & Umweltrecht}}, issn = {{0931-0983 }}, number = {{3}}, pages = {{313--340 }}, publisher = {{dfv-Mediengruppe}}, title = {{{Nationale Umsetzung der Mitgliedstaatenwahlrechte der europäischen CSR-Richtlinie beim Ausweis und bei der Prüfung der „nichtfinanziellen Erklärung“}}}, year = {{2015}}, } @misc{7943, author = {{Müller, Stefan and Stawinoga, Martin and Velte, Patrick}}, booktitle = {{Corporate ownership & control}}, issn = {{1727-9232}}, keywords = {{Corporate Disclosure, Stakeholder Relations, Corporate Social Responsibility Management, CSR reporting, Corporate Governance}}, number = {{4}}, pages = {{506--513}}, publisher = {{Virtus Interpress }}, title = {{{Stakeholder expectations on CSR management and current regulatory developments in Europe and Germany}}}, doi = {{https://doi.org/10.22495/cocv12i4c4p8}}, year = {{2015}}, } @misc{7947, author = {{Stawinoga, Martin and Velte, Patrick}}, booktitle = {{Problems and Perspectives in Management}}, issn = {{1810-5467 }}, keywords = {{corporate governance, business reporting, CSR reporting, CSR management.}}, number = {{2}}, pages = {{36--50}}, publisher = {{Business Perspectives}}, title = {{{CSR management and reporting between voluntary bonding and legal regulation. First empirical insights of the compliance to the German Sustainability Code}}}, volume = {{13}}, year = {{2015}}, } @misc{7956, author = {{Stawinoga, Martin}}, booktitle = {{ZfU: Zeitschrift für Umweltpolitik & Umweltrecht}}, issn = {{0931-0983 }}, number = {{1}}, pages = {{3--28}}, publisher = {{dfv-Mediengruppe}}, title = {{{Konzeptionelle und anwendungsorientierte Überlegungen zur Gewährleistung der Prüfbarkeit von Nachhaltigkeits- und integrierten Berichten und zur Bestimmung des Haftungsmaßstabs des Abschlussprüfers}}}, year = {{2015}}, } @misc{7966, author = {{Jolk, Christian and Greassidis, Sandra and Stolpe, Harro and Zindler, Björn}}, booktitle = {{E-proceedings of the 36th IAHR World Congress}}, location = {{Den Haag}}, publisher = {{IAHR}}, title = {{{GIS-based Planning Tools for Ingegrated Water Resources Management in South Africa}}}, year = {{2015}}, } @misc{8159, author = {{Söffker, P. and Block, D. and Meier, Uwe}}, booktitle = {{KommA 2015 – Jahreskolloquium Kommunikation in der Automation}}, publisher = {{Jahreskolloquium Kommunikation in der Automation - KommA}}, title = {{{Deterministischer Medienzugriff für industrielle Funksysteme durch eine zentrale und verteilte kooperative Ressourcenallokation}}}, year = {{2015}}, } @misc{8160, author = {{Block, D. and Meier, Uwe}}, booktitle = {{KommA 2015 – Jahreskolloquium Kommunikation in der Automation}}, publisher = {{Jahreskolloquium Kommunikation in der Automation - KommA}}, title = {{{Coexistence Performance of WSAN: Simulative Evaluation}}}, year = {{2015}}, } @misc{8162, author = {{Block, D. and Fliedner, N.H. and Töws, D. and Meier, Uwe}}, booktitle = {{20th IEEE Conference on Emerging Technologies and Factory Automation - ETFA 2015}}, publisher = {{IEEE Conference on Emerging Technologies and Factory Automation - ETFA}}, title = {{{Wireless Channel Measurement Data Sets for Reproducible Performance Evaluation in Industrial Environments}}}, year = {{2015}}, } @misc{8163, author = {{Naderpour, Y. and Block, D. and Meier, Uwe}}, booktitle = {{The Fifth International Conference on Advances in Cognitive Radio - COCORA 2015}}, publisher = {{International Conference on Advances in Cognitive Radio - COCORA}}, title = {{{Evaluation of Deterministic Medium Access Based on a Cooperative Cognitive Radio Approach}}}, year = {{2015}}, } @misc{8230, abstract = {{Das Institut der Wirtschaftsprüfer (IDW) hat die Verabschiedung des IDW RS HFA 40: Einzelfragen zu Wertminderungen von Vermögenswerten nach IAS 36 am 2. 6. 2015 bekanntgegeben. Ein wesentlicher Teil der Stellungnahme zielt auf die Bestimmung des Nutzungswerts ab. Vom IDW wurde die Notwendigkeit einer Konkretisierung dieses komplexen Rechnungslegungsaspekts für die Berichterstattungspraxis erkannt. Ziel der Stellungnahme ist folglich die Bereitstellung einer Anwendungsunterstützung für die Praxis. Dadurch soll ein Beitrag zur Reduktion der Fehleranfälligkeit bei Werthaltigkeitsprüfungen i. S. des IAS 36 geleistet und somit die Qualität der Abschlüsse verbessert werden. Der nachfolgende Beitrag geht insbesondere auf die Konkretisierungen und Erweiterungen der Regelungen des IDW RS HFA 40 bei der Ermittlung des Nutzungswerts ein. Verschiedene Punkte werden dabei durch empirische Ergebnisse aus der Rechnungslegungspraxis untermauert.}}, author = {{Müller, Stefan and Reinke, Jens and Stawinoga, Martin}}, booktitle = {{PiR: Praxis der internationalen Rechnungslegung}}, issn = {{1868-3118}}, number = {{12}}, pages = {{331--337}}, publisher = {{NWB Verlag}}, title = {{{Anwendungsunterstützung für die Praxis bei der Bestimmung des Nutzungswerts – Erweiterung und Konkretisierung durch IDW RS HFA 40 im Vergleich zum ersetzten IDW RS HFA 16}}}, year = {{2015}}, } @misc{8231, author = {{Müller, Stefan and Reinke, Jens and Stawinoga, Martin}}, booktitle = {{DStR: Deutsches Steuerrecht}}, issn = {{0949-7676}}, number = {{38}}, pages = {{2144--2150}}, publisher = {{Beck}}, title = {{{Verabschiedung von IDW RS HFA 40 zu Einzelfragen hinsichtlich Wertminderungen von Vermögenswerten nach IAS 36 – Anwendungsunterstützung für die Praxis und Verbesserung der Qualität der Abschlüsse}}}, year = {{2015}}, } @misc{8232, author = {{Müller, Stefan and Stawinoga, Martin and Velte, Patrick}}, booktitle = {{Der Betrieb}}, issn = {{0005-9935}}, number = {{39}}, pages = {{2217--2223}}, publisher = {{Handelsblatt Fachmedien}}, title = {{{Mögliche Einbettung der neuen nichtfinanziellen Erklärung in die handelsrechtliche Unternehmenspublizität und -prüfung – Erkenntnisse aus den Stellungnahmen zum Konzeptpapier des BMJV zur nationalen Umsetzung der CSR-Richtlinie}}}, year = {{2015}}, } @misc{8233, author = {{Müller, Stefan and Stawinoga, Martin}}, booktitle = {{ Betriebs-Berater : BB}}, issn = {{0340-7918}}, number = {{5}}, pages = {{241--242}}, publisher = {{dfv Mediengruppe}}, title = {{{Verschärfung der Voraussetzungen zur rückwirkenden Anwendung der Schwellenwerterhöhungen durch den BilRUG-RegE – Update zu BB 40/2014, 2411 ff.}}}, year = {{2015}}, } @inbook{8234, author = {{Müller, Stefan and Stawinoga, Martin}}, booktitle = {{Handbuch der Bilanzierung}}, isbn = {{978-3-448-01178-4}}, publisher = {{Haufe}}, title = {{{Integrierte Berichterstattung (Integrated Reporting)}}}, volume = {{180. Erg. Lfg.}}, year = {{2015}}, } @inbook{8235, author = {{Müller, Stefan and Stawinoga, Martin}}, booktitle = {{Integrated Reporting – Externe Berichterstattung und interne Steuerung nachhaltig verbessern}}, editor = {{Gleich, Roland}}, isbn = {{978-3-648-07949-2}}, pages = {{85--101}}, publisher = {{Haufe}}, title = {{{Integrated Reporting: Nutzen aus unternehmensexterner und -interner Perspektive}}}, year = {{2015}}, } @inbook{8236, author = {{Müller, Stefan and Stawinoga, Martin}}, booktitle = {{Handbuch Integrated Reporting – Herausforderung für Steuerung, Überwachung und Berichterstattung}}, editor = {{Freidank, Carl-Christian and Müller, Stefan and Velte, Patrick}}, isbn = {{978-3-503-15807-2}}, pages = {{3--28}}, publisher = {{Erich Schmidt Verlag}}, title = {{{Entwicklungslinien des Integrated Reportings}}}, year = {{2015}}, } @inbook{8237, author = {{Stawinoga, Martin}}, booktitle = {{Handbuch Integrated Reporting – Herausforderung für Steuerung, Überwachung und Berichterstattung}}, editor = {{Freidank, Carl-Christian and Müller, Stefan and Velte, Patrick}}, isbn = {{978-3-503-15807-2}}, pages = {{183--213}}, publisher = {{Erich Schmidt}}, title = {{{Stakeholder als Informationsadressaten des Integrated Reportings}}}, year = {{2015}}, } @misc{8238, author = {{Stawinoga, Martin and Velte, Patrick}}, booktitle = {{ Betriebswirtschaftliche Forschung und Praxis : BFuP}}, issn = {{0340-5370}}, number = {{5}}, pages = {{595--596}}, publisher = {{NWB-Verl. }}, title = {{{The Integrated Reporting Movement – Meaning, Momentum, Motives, and Materiality, von: Eccles, R.G., Krzus, M.P.}}}, year = {{2015}}, } @misc{8609, author = {{Köhler, Martin}}, booktitle = {{11th International Conference on Concrete Block Pavements, September 9-11, 2015}}, location = {{Dresden}}, title = {{{Das nationale Regelwerk für Pflasterdecken und Plattenbeläge in Deutschland / Technical Specifications and Regulations for Concrete Block Pavements and Slab Pavements in Germany}}}, year = {{2015}}, } @misc{8610, author = {{Köhler, Martin}}, booktitle = {{11th International Conference on Concrete Block Pavements, September 9-11, 2015}}, location = {{Dresden}}, title = {{{Entwicklung eines beleuchteten Leitsteins als Orientierungshilfe für Sehbehinderte / Development of an Illuminated Ground surface Indication for Vision-Impaired Pedestrians}}}, year = {{2015}}, } @misc{8980, author = {{Kümmel, Jens and Hanke, Michaela and Gotzeina, Uwe}}, booktitle = {{Das Wirtschaftsstudium : wisu ; Zeitschrift für Ausbildung, Prüfung, Berufseinstieg und Fortbildung}}, issn = {{0340-3084}}, number = {{1}}, pages = {{63--68}}, publisher = {{Lange}}, title = {{{Unternehmensnachfolge}}}, year = {{2015}}, } @misc{9028, author = {{Neuhaus, Bastian}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Untersuchung von Zukunfts-Gebäudekonzepten mit Büronutzung zur Erzielung eines geringen Energiebedarfs unter Berücksichtigung der Komfortanforderungen}}}, year = {{2015}}, } @misc{9029, author = {{Stehmann, Anna-Lena }}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Belichtung und Verschattung - Optimierung einer Fassade mittels Gebäudesimulation}}}, year = {{2015}}, } @misc{9030, author = {{Herrero Cabas, Alicia }}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Passivhouse for existing buildings - Limitations and potentials of the ground structure }}}, year = {{2015}}, } @misc{9031, author = {{Drath, Nicolas}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Raumakustik in Mehrpersonenbüros - Methoden der Messung und Simulation}}}, year = {{2015}}, } @misc{9032, author = {{Kurth, Alexander}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Möglichkeiten der energetischen Sanierung eines EFH aus den 50er Jahren unter Berücksichtigung ökonomischer und rechtlicher Aspekte }}}, year = {{2015}}, } @misc{9066, author = {{Dimitrov , Ivan }}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Ganzheitliche energetische Modellierung von Privathaushalten unter Berücksichtigung von Gebäudestruktur und Nutzerverhalten}}}, year = {{2015}}, } @misc{9067, author = {{Joachimsmeyer, Katharina }}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Einfluss von Schallschirmen auf die Sprachverständlichkeit in Büroräumen – Vergleich von Messung und Simulation raumakustischer Parameter}}}, year = {{2015}}, } @misc{9084, author = {{Van Uem , Ronja}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Sanierungsplan eines Fachwerkhauses vor dem Hintergrund der EnEV 2014}}}, year = {{2015}}, } @misc{9088, author = {{Mallohn, Andras}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Nachhaltigkeit im Facility Management – Entwicklung von Betriebsstrategien für Schulen}}}, year = {{2015}}, } @misc{9090, author = {{Rees-Clark, Melanie}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Vom Altbau zum Effizienzhaus – Modernisierung und energetische Sanierung einer DDH}}}, year = {{2015}}, } @book{9111, author = {{Pohl, Burkhard and Ehret, Marietta}}, isbn = {{978-3-945059-27-2}}, pages = {{166}}, publisher = {{e-enterprise}}, title = {{{Lemgos grüne Seite}}}, year = {{2015}}, } @inbook{5214, author = {{Pottgiesser, Uta}}, booktitle = {{Entwurfs- und Konstruktionstafeln für Architekten }}, editor = {{Holschemacher, K.}}, isbn = {{ 978-3-410-25040-1 }}, pages = {{Kapitel 2C: 2.49--2.82}}, publisher = {{Beuth}}, title = {{{Baukonstruktion - Innenausbau}}}, year = {{2015}}, } @book{5217, author = {{Pottgiesser, Uta and Hemmerling, Marco and Böke, Jens}}, isbn = {{978-3-939349-23-5}}, title = {{{Facade2015. computational optimisation: proceedings}}}, year = {{2015}}, } @inbook{5218, author = {{Pottgiesser, Uta}}, booktitle = {{Baubetrieb Praxis kompakt }}, editor = {{Al-Ghanem, Yaarob and Roßbach, Jörg}}, isbn = {{978-3-410-21725-1}}, pages = {{13.1--13.59}}, title = {{{Innenausbau - Raumbildender Ausbau}}}, year = {{2015}}, } @inbook{5219, author = {{Pottgiesser, Uta}}, booktitle = {{Zukunftsstadt 2050 : Futury City 2050 }}, editor = {{Heusler, Winfried}}, title = {{{Konzepte statt Prognosen}}}, year = {{2015}}, } @inproceedings{5292, abstract = {{Many workspaces in open-plan offices suffer from high noise levels and undesired transmissions of speech noise between the users. These are leading to increased distraction by irrelevant speech information. This acoustical overall situation has serious consequences for the working environment: concentration- and performance loss as well as impairments of mood and well-being. Surveys on disturbing sounds have proven that human language distracts much more than sounds that are generated by natural sources or technical devices. Especially in times of changing working structures, when flexible spaces promoting interaction gain an increasing importance, room acoustics have to ensure that all negative impairments caused by noise and speech sound are prevented. Different measures and concepts come into question for acoustical optimization: absorption, shielding and sound-masking. Absorption can be achieved by means of acoustically-effective ceilings, floorings or furniture although these singular measures are often not sufficient. Sophisticated sound-absorbing systems are in the market. To reduce disturbing speech information sufficiently, advanced sound-shielding measures between the working areas are required. To efficiently prevent speech-like noise an adaptive sound-masking system in combination with visually adapted shielding elements should be developed, tested and implemented for open-plan offices in the presented research. The studies have shown that the design of these absorbing and shielding elements is a relevant factor as any conformity between spatial design and sound helps to improve the user acceptance. It was further verified by tests that permanent movements in the peripheral field of vision of the test persons were perceived as distracting and annoying. Thus the sound-masking was placed outside the field of vision. In general the user acceptance of masking sounds was assessed more positively when combined with a visualisation (e.g. covering with „leaves“) compared to the variant without any covering. But the whole system has to be further developed.}}, author = {{Pottgiesser, Uta and Kirch, Christoph}}, booktitle = {{Conference: 31st International PLEA ConferenceAt: BolognaVolume: Proceedings of PLEA2015 Architecture in (R)Evolution - Book of Abstracts.}}, isbn = {{978-88-941163-0-4}}, location = {{Bologna}}, publisher = {{ [Ass. Building Green Futures]}}, title = {{{Improving Room Acoustics in open-plan Offices. Testing the Relationship of acoustical and visual Distraction at Workspaces with sound-masking Systems}}}, year = {{2015}}, }