@inproceedings{6460,
author = {{Yuan, Haomiao and Song, Jian}},
location = {{Bochum}},
title = {{{The development chain in coating materials for electrical contacts}}},
year = {{2016}},
}
@misc{647,
author = {{Adrian, Benjamin and Riediger, Daniel and Hinrichsen, Sven}},
booktitle = {{Arbeit in komplexen Systemen - digital, vernetzt, human?! 62. Kongress der Gesellschaft für Arbeitswissenschaft }},
isbn = {{978-3-936804-20-1}},
keywords = {{Benutzerfreundlichkeit, Ergonomie, Fertigungsanlage, Industrie 4.0}},
location = {{Aachen}},
pages = {{A.3.1}},
publisher = {{GfA-Press}},
title = {{{Trends in der Weiterentwicklung von Maschinenbediensystemen im Kontext der Industrie 4.0}}},
year = {{2016}},
}
@inproceedings{648,
abstract = {{Der Erinnerungseffekt beim Lernen ist größer, wenn neben den Aufnahmearten des „klassischen“ Unterrichts (hören, sehen) weitere Lernkanäle (diskutieren, selbst tun) angesprochen werden (Gasser 2014, S. 9). Aufgrund dieser Erkenntnis wurde ein Planspiel für die Lehre im Modul Produktionssysteme entwickelt, welches produktionslogistische Arbeitsabläufe im Allgemeinen und die Kanban-Methode im Speziellen vermitteln soll. Zur Konzeption wurden zunächst Lernziele definiert. Aus diesen wurde ein Grobkonzept abgeleitet, das im Rahmen einer sich anschließenden Detailkonzeptionierung ausgearbeitet wurde. Das Grobkonzept orientiert sich an dem Vorgehensmodell zur Kanban-Einführung nach Geiger et al. (2011, S. 25). Im Rahmen der Feinkonzeptplanung wurde eine Montagelinie von Legofahrzeugen gestaltet und Aufgabenstellungen zu den Themen Kanban-Tauglichkeit und Berechnung der Anzahl an Kanban erstellt. Das Planspiel veranschaulicht unter anderem, wie sich die Kanban-Methode von einer herkömmlichen Produktionsplanung und -steuerung unterscheidet. Das Planspiel wurde im Rahmen einer Lehrveranstaltung erprobt, evaluiert und aufgrund der positiven Resonanz der Studierenden in die Lehre integriert.}},
author = {{Brown, David and Paris, Melissa and Hinrichsen, Sven}},
booktitle = {{Arbeit in komplexen Systemen - digital, vernetzt, human?! 62. Kongress der Gesellschaft für Arbeitswissenschaft }},
isbn = {{978-3-936804-20-1}},
keywords = {{Kanban, Planspiel, Didaktik}},
location = {{Aachen}},
pages = {{-- -- --}},
publisher = {{GfA-Press}},
title = {{{Entwicklung eines Planspiels zur Vermittlung der Kanban-Methode}}},
year = {{2016}},
}
@inproceedings{649,
author = {{Gamber, Thilo Gerhard and Hrdina, J.}},
booktitle = {{Arbeit in komplexen Systemen - digital, vernetzt, human?! 62. Kongress der Gesellschaft für Arbeitswissenschaft }},
isbn = {{978-3-936804-20-1}},
location = {{Aachen}},
pages = {{-- -- --}},
publisher = {{GfA-Press}},
title = {{{Standards, Tools und Projektmanagement im Industrial Engineering - eine Organisationsentwicklungsmaßnahme der Continental AG}}},
year = {{2016}},
}
@techreport{650,
abstract = {{Der anforderungsgerechten Montagesystemgestaltung kommt sowohl aus Arbeitgeber- als auch aus Arbeitnehmersicht eine große Bedeutung zu. Der Prozess der Gestaltung eines neuen Montagesystems erfolgt allerdings in vielen Betrieben – insbesondere wenn die Funktion des Industrial Engineering nur unzureichend ausgeprägt ist – wenig methodengestützt, so dass das Risiko der Entwicklung von suboptimalen Gestaltungslösungen groß ist. Das neu entwickelte REFA-Standardprogramm Montagesystemgestaltung soll Beschäftigten, die Planungsfunktionen in der Produktion ausüben, eine Hilfestellung bei der anforderungsgerechten Gestaltung von Montagesystemen liefern. Grundzüge dieses neuen Standardprogramms werden in diesem Beitrag dargestellt.}},
author = {{Hinrichsen, Sven and Riediger, Daniel}},
publisher = {{REFA Bundesverband e. V.}},
title = {{{REFA-Standardprogramm Montagesystemgestaltung}}},
year = {{2016}},
}
@inproceedings{651,
abstract = {{The requirements for the ergonomic design of user interfaces on production machines acquire an increasing importance in the context of »Industrie 4.0«. The trend of increasing technological complexity of machines mainly correlates with the integration of additional functions in machines. Increasing functionality of the machines leads to a cumulative number of control elements, which limits the clarity of the machine Operation and leads to higher cognitive demands in the machine operation. The aim of the paper is to demonstrate technological trends of the design of production machines. Based on this, the importance of ergonomics for production machines and concrete design recommendations with reference to study results of investigations on production machines are presented. The results of this study arose in the context of the research focus »ProErgo« (Ergonomic design of production machines in the context of the industry 4.0), which is funded by the State of North Rhine-Westphalia in Germany.}},
author = {{Hinrichsen, Sven and Riediger, Daniel and Adrian, Benjamin}},
booktitle = {{ERGONOMICS 2016 - Focus on Synergy, 6th International Ergonomics Conference}},
keywords = {{Bedienelement, Benutzeroberfläche, Industrie 4.0}},
location = {{Zadar, Croatia}},
pages = {{129 -- 136}},
publisher = {{FEES}},
title = {{{Ergonomic Design of Production Machines - Trends and Empirical Results}}},
year = {{2016}},
}
@article{653,
abstract = {{Neben der Prozessoptimierung müssen Unternehmen, insbesondere KMU, Produkte optimieren, um ihre Wettbewerbsfähigkeit abzusichern. Der montagegerechten Produktgestaltung kommt in diesem Zusammenhang besondere Bedeutung zu. In diesem Beitrag wird skizziert, wie die betriebliche Funktion des Industrial Engineering mit einem neu entwickelten REFA-Standardprogramm den Produktentwicklungsprozess unterst¨tzen kann.
}},
author = {{Jungkind, Wilfried and Helmrich, Ingo}},
issn = {{0947-0085}},
journal = {{ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb}},
number = {{3}},
pages = {{139--142}},
publisher = {{Carl Hanser Verlag}},
title = {{{Montagegerechte Produktgestaltung im Produktentwicklungsprozess}}},
doi = {{10.3139/104.111481}},
volume = {{111}},
year = {{2016}},
}
@article{654,
abstract = {{Die Notwendigkeit, im globalen Wettbewerb auf Marktanforderungen und Kundenbedarf flexibel reagieren zu müssen, stellt Unternehmen vor große Herausforderungen. Zentrale Aspekte sind hierbei der verlustarme Betrieb von Maschinen und die Fähigkeit, in kleinen Losgrößen zu produzieren. Gerade kleine und mittlere Unternehmen (KMU) verfügen meist nicht in ausreichendem Maße über die personellen Ressourcen und die Kenntnisse, um die maschinellen Bearbeitungsprozesse systematisch und nachhaltig zu verbessern. Das Standardprogramm Betriebsmittelmanagement liefert hier strukturelle und methodische Hilfestellungen, um diesen Herausforderungen zu begegnen. }},
author = {{Könneker, Martin and Jungkind, Wilfried}},
issn = {{1434-1980}},
journal = {{Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse}},
keywords = {{Fertigungsplanung, Arbeitsorganisation, Auftragsfertigung, Intelligente Fertigung, Klein- und Mittelbetrieb, Operations Research, Produktionsprozess, Wettbewerb}},
number = {{3}},
pages = {{78 -- 81}},
publisher = {{GITO-Verlag}},
title = {{{Systematisches und nachhaltiges Betriebsmittelmanagement }}},
volume = {{32}},
year = {{2016}},
}
@inproceedings{655,
abstract = {{Die Anforderungen an die Gestaltung von Montagesystemen verändern sich. Dazu tragen sich verkürzende Innovations- und Produktlebenszyklen sowie eine zunehmende Variantenvielfalt bei, mit der eine Montage von kleinen Losen bis hin zur kundenindividuellen Montage einhergeht. Besondere Herausforderungen von Industriebetrieben mit Montagebereichen bestehen darin, effiziente Montageprozesse mit einer hohen Prozessfähigkeit zu gestalten. Insbesondere bei Montagetätigkeiten mit größeren Arbeitsinhalten besteht vielfach das Problem, dass es aufgrund einer hohen Vielfalt an Produktvarianten und einer schwankenden Nachfrage zu Montagefehlern kommt. Zudem werden unter diesen Rahmenbedingungen oftmals Mengen- bzw. Produktivitätsziele verfehlt. Ursachen hierfür liegen u.a. darin begründet, dass Anlernprozesse von neuen Beschäftigten unzureichend unterstützt werden und Informationen zu einzelnen Montagevorgängen nicht so aufbereitet sind, dass diese in kurzer Zeit vom Menschen erfasst und intuitiv richtig umgesetzt werden können. Im Rahmen einer am Labor für Industrial Engineering der Hochschule Ostwestfalen-Lippe durchgeführten Studie wurde ein Prototyp eines projektionsgestützten Assistenzsystems für die manuelle Montage entwickelt und getestet. Das System enthält insbesondere Funktionalitäten zur ergonomischen Darstellung von Arbeitsanweisungen. Dazu zählen unter anderem Markierungs- bzw. Positionierungsdarstellungen und eine Pick-to-Light-Funktion. Durch die situationsangepasste Darstellung von Informationen kann die Komplexität von großen Arbeitsinhalten beherrschbar gemacht werden.}},
author = {{Unrau, Alexander and Riediger, Daniel and Hinrichsen, Sven}},
booktitle = {{Arbeit in komplexen Systemen - digital, vernetzt, human?! 62. Kongress der Gesellschaft für Arbeitswissenschaft }},
isbn = {{978-3-936804-20-1}},
location = {{Aachen}},
number = {{1}},
pages = {{-- -- --}},
publisher = {{GfA-Press}},
title = {{{Entwicklung eines projektionsgestützten Assistenzsystems für die manuelle Montage}}},
year = {{2016}},
}
@techreport{656,
abstract = {{Die Anforderungen an die Gestaltung von Montagesystemen verändern sich. Dazu tragen kürzer werdende Innovations- und Produktlebenszyklen sowie eine zunehmende Variantenvielfalt bei, mit der eine Montage von kleinen Losen bis hin zur kundenindividuellen Montage einhergeht.}},
author = {{Unrau, Alexander and Riediger, Daniel and Hinrichsen, Sven}},
keywords = {{CAD, PPS, Prozessdaten, Simulation}},
publisher = {{REFA}},
title = {{{Projektionsgestützte Assistenzsysteme in der manuellen Montage}}},
year = {{2016}},
}
@inproceedings{657,
abstract = {{The requirements for the configuration of assembly systems are changing. With innovation times and product life cycles constantly being shortened, as well as an increasing number of variants and small batches contributing to this phenomenon, industries are faced with the challenge to create efficient processes with high process capability. In particular, assembly errors happen because of activities with larger work content and fluctuating demands. In addition, under these conditions often quantity or rather productivity targets are missed. The reasons for this are the insufficient support of learning processes for new employees as well as the missing preparation of assembly information, which should be designed to be spotted quickly and implemented intuitively correct. In a study at the Laboratory of Industrial Engineering of the Ostwestfalen-Lippe University of Applied Sciences, a prototype of a projection based assistance system for manual assembly has been developed and tested. The system contains functionalities for ergonomic display of work instructions. These include, markers and precise positioning representations corresponding with these, a pick-to-light function and other features. By adapting the representation to the context-sensitive information, the complexity of large work contents can be made manageable.}},
author = {{Unrau, Alexander and Hinrichsen, Sven and Riediger, Daniel}},
booktitle = {{ERGONOMICS 2016 - Focus on Synergy, 6th International Ergonomics Conference}},
location = {{Zadar, Croatia}},
pages = {{365--370}},
publisher = {{FEES}},
title = {{{Development of Projection Based Assistance System for Manual Assembly}}},
year = {{2016}},
}
@book{6583,
author = {{ Menke, Norbert and Göcking, Christian and Grönhagen, Nina and Joest, Ralf and Lohr, Mathias and Olthoff, Matthias and Conze , Klaus-Jürgen }},
isbn = {{978-3-940726-45-2 }},
pages = {{448 }},
publisher = {{Arbeitskreis Libellen Nordrhein-Westfalen - Münster : Verein zur Förderung des LWL-Museums für Naturkunde e.V. }},
title = {{{Die Libellen Nordrhein-Westfalens}}},
year = {{2016}},
}
@inbook{6594,
author = {{Lohr, Mathias and Conze, Klaus-Jürgen}},
booktitle = {{Die Libellen Nordrhein-Westfalens}},
isbn = {{978-3-940726-45-2}},
pages = {{22--39}},
publisher = {{LWL-Museum für Naturkunde}},
title = {{{Großlandschaften und Naturräume in Nordrhein-Westfalen}}},
year = {{2016}},
}
@inbook{6595,
author = {{Lohr, Mathias}},
booktitle = {{Die Libellen Nordrhein-Westfalens}},
isbn = {{978-3-940726-45-2}},
pages = {{64--67}},
publisher = {{Arbeitskreis Libellen Nordrhein-Westfalen - Münster : Verein zur Förderung des LWL-Museums für Naturkunde e.V.}},
title = {{{Die Libellenarten in Nordrhein-Westfalen}}},
year = {{2016}},
}
@inbook{6596,
author = {{Lohr, Mathias and Conze, Klaus-Jürgen}},
booktitle = {{Die Libellen Nordrhein-Westfalens}},
isbn = {{978-3-940726-45-2}},
pages = {{48--55}},
publisher = {{Arbeitskreis Libellen Nordrhein-Westfalen - Münster : Verein zur Förderung des LWL-Museums für Naturkunde e.V.}},
title = {{{Libellen und ihre Erforschung in Nordrhein-Westfalen – eine lange Geschichte}}},
year = {{2016}},
}
@inbook{6597,
author = {{Lohr, Mathias}},
booktitle = {{Die Libellen Nordrhein-Westfalens}},
isbn = {{978-3-940726-45-2}},
pages = {{40--47}},
publisher = {{Arbeitskreis Libellen Nordrhein-Westfalen - Münster : Verein zur Förderung des LWL-Museums für Naturkunde e.V.}},
title = {{{Klima in NRW}}},
year = {{2016}},
}
@inbook{6598,
author = {{Lohr, Mathias}},
booktitle = {{Die Libellen Nordrhein-Westfalens}},
isbn = {{978-3-940726-45-2}},
pages = {{146--149}},
publisher = {{Arbeitskreis Libellen Nordrhein-Westfalen - Münster : Verein zur Förderung des LWL-Museums für Naturkunde e.V.}},
title = {{{Erythromma lindenii Selys, 1840. Pokaljungfer}}},
year = {{2016}},
}
@inbook{6599,
author = {{Lohr, Mathias}},
booktitle = {{Die Libellen Nordrhein-Westfalens}},
isbn = {{978-3-940726-45-2}},
pages = {{178--181}},
publisher = {{Arbeitskreis Libellen Nordrhein-Westfalen - Münster : Verein zur Förderung des LWL-Museums für Naturkunde e.V.}},
title = {{{Aeshna affinis Vander Linden, 1820. Südliche Mosaikjungfer}}},
year = {{2016}},
}
@inbook{6600,
author = {{Lohr, Mathias}},
booktitle = {{Die Libellen Nordrhein-Westfalens}},
isbn = {{978-3-940726-45-2}},
pages = {{220--223}},
publisher = {{Arbeitskreis Libellen Nordrhein-Westfalen - Münster : Verein zur Förderung des LWL-Museums für Naturkunde e.V.}},
title = {{{Anax parthenope Selys, 1839. Kleine Königslibelle}}},
year = {{2016}},
}
@inbook{6601,
author = {{Lohr, Mathias}},
booktitle = {{Die Libellen Nordrhein-Westfalens}},
isbn = {{978-3-940726-45-2}},
pages = {{224--227}},
publisher = {{Arbeitskreis Libellen Nordrhein-Westfalen - Münster : Verein zur Förderung des LWL-Museums für Naturkunde e.V.}},
title = {{{Brachytron pratense Muller, 1764. Früher Schilfjäger.}}},
year = {{2016}},
}
@inbook{6602,
author = {{Lohr, Mathias}},
booktitle = {{Die Libellen Nordrhein-Westfalens}},
isbn = {{978-3-940726-45-2}},
pages = {{228--233}},
publisher = {{Arbeitskreis Libellen Nordrhein-Westfalen - Münster : Verein zur Förderung des LWL-Museums für Naturkunde e.V.}},
title = {{{Gomphus flavipes Charpentier, 1825. Asiatische Keiljungfer}}},
year = {{2016}},
}
@inbook{6603,
author = {{Lohr, Mathias}},
booktitle = {{Die Libellen Nordrhein-Westfalens}},
isbn = {{978-3-940726-45-2}},
pages = {{234--237}},
publisher = {{Arbeitskreis Libellen Nordrhein-Westfalen - Münster : Verein zur Förderung des LWL-Museums für Naturkunde e.V.}},
title = {{{Gomphus pulchellus Selys, 1840. Westliche Keiljungfer}}},
year = {{2016}},
}
@inbook{6604,
author = {{Lohr, Mathias}},
booktitle = {{Die Libellen Nordrhein-Westfalens}},
isbn = {{978-3-940726-45-2}},
pages = {{242--245}},
publisher = {{Arbeitskreis Libellen Nordrhein-Westfalen - Münster : Verein zur Förderung des LWL-Museums für Naturkunde e.V.}},
title = {{{Onychogomphus forcipatus Linnaeus, 1758. Kleine Zangenlibelle}}},
year = {{2016}},
}
@inbook{6605,
author = {{Lohr, Mathias}},
booktitle = {{Die Libellen Nordrhein-Westfalens}},
isbn = {{978-3-940726-45-2}},
pages = {{282--285}},
publisher = {{Arbeitskreis Libellen Nordrhein-Westfalen - Münster : Verein zur Förderung des LWL-Museums für Naturkunde e.V.}},
title = {{{Crocothemis erythraea Brulle, 1832. Feuerlibelle}}},
year = {{2016}},
}
@inbook{6606,
author = {{Lohr, Mathias}},
booktitle = {{Die Libellen Nordrhein-Westfalens}},
isbn = {{978-3-940726-45-2}},
pages = {{366--367}},
publisher = {{Arbeitskreis Libellen Nordrhein-Westfalen - Münster : Verein zur Förderung des LWL-Museums für Naturkunde e.V.}},
title = {{{Ausgewählte Gebiete mit bedeutenden Libellenvorkommen in Nordrhein-Westfalen}}},
year = {{2016}},
}
@article{6607,
abstract = {{Die Vermittlung auenökologischer Aspekte geschieht in Aueninfozentren oftmals über Lebensräume oder größere, auffällige Tier- und Pflanzenarten. Insekten werden dabei bislang vergleichsweise wenig berücksichtigt. Im Natur- Forum Bislicher Insel bei Xanten am Niederrhein werden auentypische Insektenarten in Schaukästen vorgestellt. Anhand anschaulicher Geschichten zu ihrer Lebensweise wird erläutert, mit welchen Strategien sie an ein (Über)Leben in Flusslandschaften angepasst sind, wie sie ungünstige Jahreszeiten oder extreme Wasserstände überstehen. Die Schaukästen ergänzen dabei vorhandene thematische Einheiten der Dauerausstellung „AuenGeschichten“ zu verschiedenen Lebensbereichen der Aue, indem sie bewusst auf bestimmte Aspekte des Mikrokosmos der Insekten fokussieren. Am Beispiel von Röhricht- und Sanduferbewohnern wird näher erläutert, welche biologischen und physiologischen Anpassungen an ein Leben in Flussauen die Tiere besitzen und welche z. T. sehr komplexen Wechselwirkungen die Auenlebensgemeinschaften aufweisen.}},
author = {{Lohr, Mathias and Riedl, Ulrich}},
issn = {{2190-7234}},
journal = {{Auenmagazin : Magazin des Auenzentrums Neuburg a.d. Donau}},
number = {{10}},
pages = {{38--42}},
publisher = {{Auenzentrum }},
title = {{{Durch Insekten Auen besser verstehen – Schaukästen (Dioramen) für das NaturForum Bislicher Insel}}},
year = {{2016}},
}
@book{6608,
author = {{Dieterich, Martin and Heintschel, Sebastian and Hausberg, Malina and Mück, Jens and Bauer, Tobias and Berger, Jochen and Dorsch, Heike and Zürcher, Arno and Nerlich, Kristin and Mastel, Klaus and Riedl, Ulrich and Fiebig, Isabel and Lohr, Mathias}},
isbn = {{978-3-89624-178-8}},
pages = {{328}},
publisher = {{Bundesamt für Naturschutz}},
title = {{{Biomassekulturen der Zukunft aus Naturschutzsicht : Ergebnisse aus dem F+E-Vorhaben (FKZ-Nr. 3511 82 150) }}},
volume = {{442}},
year = {{2016}},
}
@article{6757,
abstract = {{This paper is concerned with the question of how to deal with Google Shopping’s position on online markets in order to prevent harm to public welfare. From the perspective of sellers and buyers of goods and services in Germany, Google can be seen as a gatekeeper to the Internet and thus as an essential facility. It is shown that Google Shopping represents a typical club good. Therefore, welfare-optimal rules must be adhered. In this context, it should be noted that in the current Google Shopping search results, artificial rivalry is created among the sellers to get the maximum willingness to pay for a top listing. The proposed solution in this paper provides a summary score list of all sellers of a particular product for which a quantitative independent contribution should be required instead of a fee.}},
author = {{von Blanckenburg, Korbinian}},
issn = {{2366-0317}},
journal = {{Zeitschrift für Wirtschaftspolitik}},
number = {{3}},
pages = {{240--256}},
publisher = {{ De Gruyter Oldenbourg}},
title = {{{Führt Google Shopping zu einer neuen Art von Wettbewerbsproblem?}}},
doi = {{10.1515/zfwp-2014-0303}},
volume = {{63}},
year = {{2016}},
}
@misc{7486,
author = {{Jaladi, Krishna Manikanta}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Calculation of point multiples in eliptic curves over binary fields - perfomrance optimizations and implementations in cryptographic software libraries }}},
year = {{2016}},
}
@misc{7487,
author = {{Kutha Mohamed, Hasan Faizal}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Evaluation of the number of primitive operations involved in the calculation of multiples of points in elliptic curves over prime fields used in TLS implementations}}},
year = {{2016}},
}
@misc{7488,
author = {{James, Anza Rani}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{OPC-UA Security: Analysis and Comparison with TLS}}},
year = {{2016}},
}
@misc{7553,
author = {{Schmohl, Tobias and Braungart, Georg}},
booktitle = {{Synergie. Fachmagazin für Digitalisierung in der Lehre}},
issn = {{2509-3088}},
number = {{1}},
pages = {{54--59}},
publisher = {{Universität Hamburg}},
title = {{{Virtuelle Rhetorik: Diversitätsorientierung am Beispiel eines integrativen Online-Angebots im Bereich Schlüsselqualifikationen}}},
year = {{2016}},
}
@misc{7644,
author = {{Köhler, Martin}},
booktitle = {{5. Deutsche Pflastertage des Zentralverbandes des Deutschen Baugewerbes, 23./24.02.2016, Fulda}},
publisher = {{Eigenverlag Zentralverband des Deutschen Baugewerbes}},
title = {{{FGSV-Regelwerk: Neuerungen}}},
year = {{2016}},
}
@techreport{7653,
author = {{Hofmann, Martin Ludwig}},
booktitle = {{https://www.communication-director.com}},
title = {{{A digital companion during pregnancy. The strategic story behind the award winning app, iMamaiPapa}}},
year = {{2016}},
}
@misc{7790,
author = {{Deuter, Andreas and Rizzo, Stefano}},
booktitle = {{Procedia Technology}},
issn = {{2212-0173}},
keywords = {{PLM, ALM, OSLC}},
pages = {{405--412}},
publisher = {{ Elsevier}},
title = {{{A Critical View on PLM/ALM Convergence in Practice and Research}}},
doi = {{10.1016/j.protcy.2016.08.052}},
volume = {{26}},
year = {{2016}},
}
@misc{7853,
author = {{Hennigs, Christian and Lahdo, Rabi and Springer, André and Kaierle, Stefan and Hustedt, Michael and Brand, Helmut and Wloka, Richard and Zobel, Frank and Dültgen, Peter}},
booktitle = {{SPIE Proceedings}},
editor = {{Dorsch, Friedhelm and Kaierle, Stefan}},
issn = {{0277-786X}},
location = {{San Francisco, California, United States}},
publisher = {{Society of Photo-Optical Instrumentation Engineers (SPIE)}},
title = {{{Laser-based gluing of diamond-tipped saw blades}}},
doi = {{10.1117/12.2212842}},
year = {{2016}},
}
@misc{7854,
author = {{Nothdurft, Sarah and Springer, André and Kaierle, Stefan and Ross, Jonathan and Stonis, Malte}},
booktitle = {{Journal of Laser Applications}},
issn = {{1042-346X}},
publisher = {{Laser Institute of America (LIA)}},
title = {{{Laser soldering and brazing of steel-aluminum sheets for tailored hybrid tubes}}},
doi = {{10.2351/1.4943996}},
year = {{2016}},
}
@misc{7855,
author = {{Lahdo, Rabi and Springer, André and Pfeifer, Ronny and Kaierle, Stefan and Overmeyer, Ludger}},
booktitle = {{Physics Procedia}},
issn = {{1875-3892}},
pages = {{396--405}},
publisher = {{Elsevier}},
title = {{{High-power Laser Welding of Thick Steel-aluminum Dissimilar Joints}}},
doi = {{10.1016/j.phpro.2016.08.041}},
year = {{2016}},
}
@misc{7856,
author = {{Hennigs, Christian and Lahdo, Rabi and Springer, André and Hustedt, Michael and Kaierle, Stefan and Brand, Helmut and Zobel, Frank and Wloka, Richard and Dültgen, Peter}},
booktitle = {{adhäsion KLEBEN & DICHTEN}},
issn = {{1619-1919}},
pages = {{22--27}},
publisher = {{Springer}},
title = {{{Schleifsegmente laserbasiert kleben : Neuer Prozess zum Bestücken von Diamant-Trennschleifscheiben}}},
doi = {{10.1007/s35145-015-0607-1}},
volume = {{60}},
year = {{2016}},
}
@misc{7857,
author = {{Seffer, Oliver and Pfeifer, Ronny and Springer, André and Kaierle, Stefan}},
booktitle = {{Physics Procedia}},
issn = {{1875-3892}},
pages = {{383--395}},
publisher = {{Elsevier}},
title = {{{Investigations on Laser Beam Welding of Different Dissimilar Joints of Steel and Aluminum Alloys for Automotive Lightweight Construction}}},
doi = {{10.1016/j.phpro.2016.08.040}},
volume = {{83}},
year = {{2016}},
}
@misc{7899,
author = {{Velte, Patrick and Stawinoga, Martin}},
booktitle = {{Der moderne Staat: Zeitschrift für Public Policy, Recht und Management}},
issn = {{2196-1395 }},
keywords = {{Wirtschaftsprüfung, Abschlussprüferaufsicht, Staatliche Regulierung, Prüfungsqualität}},
number = {{1}},
pages = {{135 -- 159}},
publisher = {{Budrich }},
title = {{{Führt die Neuordnung der Berufsaufsicht und externen Qualitätskontrolle der Wirtschaftsprüfer nach dem APAReG zu einer erhöhten Prüfungsqualität?}}},
volume = {{9}},
year = {{2016}},
}
@misc{7900,
author = {{Müller, Stefan and Stawinoga, Martin}},
booktitle = {{WPg: Die Wirtschaftsprüfung}},
issn = {{0340-9031}},
number = {{11}},
pages = {{612--619}},
publisher = {{IDW Verlag}},
title = {{{Entscheidungsnützlichkeit des Integrated Reporting? Wesentlichkeitsmatrix für die Identifikation relevanter Aspekte eines integrierten Berichts}}},
year = {{2016}},
}
@misc{7920,
author = {{Londong, Jörg and Giese, Thomas and Oldenburg, Martin}},
booktitle = {{Korrespondenz Abwasser}},
issn = {{1866-0010}},
number = {{11}},
pages = {{968 -- 974}},
publisher = {{DWA - Deutsche Vereinigung für Wasserwirtschaft, Abwasser und Abfall e. V.}},
title = {{{KREIS - Ergebnisse für die Übertragbarkeit in die Praxis }}},
year = {{2016}},
}
@misc{7924,
author = {{Oldenburg, Martin and To, Kieu-Anh}},
booktitle = {{Workshop "Entwicklung von Lernmaterialien für Studierende"}},
location = {{TH Georg Simon Ohm, Nürnberg}},
title = {{{Von Fehlern anderer Lernen }}},
year = {{2016}},
}
@misc{7941,
author = {{Velte, Patrick and Stawinoga, Martin}},
booktitle = {{StuW: Steuer und Wirtschaft}},
issn = {{0341-2954}},
number = {{2}},
pages = {{118--133 }},
publisher = {{Schmidt}},
title = {{{Handels- und steuerbilanzielle (Teil-)Gewinnrealisierung bei (langfristigen) Werkverträgen – Eine kritische Würdigung vor dem Hintergrund des BFH-Urteils vom 14.5.2014 und der „Irrweg“ des BMF}}},
year = {{2016}},
}
@inbook{7965,
author = {{Jolk, Christian and Greassidis, Sandra and Zindler, Björn and Stolpe, Harro and Abecker, Andreas and Wössner, Roman}},
booktitle = {{MOSA Integrated Water Resources Management in the „Middle Olifants“ river basin, South Africa – Phase II Summary Report – }},
editor = {{Rudolph, Karl-Ulrich}},
isbn = {{978-3-9818108-0-6}},
pages = {{247}},
publisher = {{IEEM}},
title = {{{Planning and Decision Support Tools for Integrated Water Resource Management on the river basin level in South Africa using the example of the Middle Olifants sub-basin}}},
volume = {{34}},
year = {{2016}},
}
@misc{11566,
abstract = {{Introduction : Information systems are a key success factor for medical research and healthcare. Currently, most of these systems apply heterogeneous and proprietary data models, which impede data exchange and integrated data analysis for scientific purposes. Due to the complexity of medical terminology, the overall number of medical data models is very high. At present, the vast majority of these models are not available to the scientific community. The objective of the Portal of Medical Data Models (MDM, https://medical-data-models.org ) is to foster sharing of medical data models.}},
author = {{Dugas, Martin and Neuhaus, Philipp and Meidt, Alexandra and Doods, Justin and Storck, Michael and Bruland, Philipp and Varghese, Julian}},
booktitle = {{Database}},
issn = {{1758-0463}},
publisher = {{Oxford University Press (OUP)}},
title = {{{Portal of medical data models: information infrastructure for medical research and healthcare}}},
doi = {{10.1093/database/bav121}},
volume = {{2016}},
year = {{2016}},
}
@misc{11737,
abstract = {{Abstract
Background: Chronic kidney disease (CKD) is strongly associated with coronary artery disease (CAD). We established a prospective observational nationwide multicenter registry to evaluate current treatment and outcomes in patients with both CKD and angiographically documented CAD.
Methods: In 32 cardiological centers 3,352 CAD patients with ≥50% stenosis in at least one coronary artery were enrolled and classified according to their estimated glomerular filtration rate and proteinuria into one of five stages of CKD or as a control group.
Results: 2,723 (81.2%) consecutively enrolled patients suffered from CKD. Compared to controls, CKD patients had a higher prevalence of diabetes, hypertension, peripheral artery diseases, heart failure, and valvular heart disease (each p<0.001). Myocardial infarctions (p = 0.02), coronary bypass grafting, valve replacements and pacemaker implantations had been recorded more frequently (each p<0.001). With advanced CKD, the number of diseased coronary vessels and the proportion of patients with reduced left ventricular ejection fraction (LVEF) increased significantly (both p<0.001). Percutaneous coronary interventions were performed less frequently (p<0.001) while coronary bypass grafting was recommended more often (p = 0.04) with advanced CKD. With regard to standard drugs in CAD treatment, prescriptions were higher in our registry than in previous reports, but beta-blockers (p = 0.008), and angiotensin-converting-enzyme inhibitors and/or angiotensin-receptor blockers (p<0.001) were given less often in higher CKD stages. In contrast, in the subgroup of patients with moderately to severely reduced LVEF the prescription rates did not differ between CKD stages. In-hospital mortality increased stepwise with each CKD stage (p = 0.02).
Conclusions: In line with other studies comprising CKD cohorts, patients' morbidity and in-hospital mortality increased with the degree of renal impairment. Although cardiologists' drug prescription rates in CAD-REF were higher than in previous studies, they were still lower especially in advanced CKD stages compared to cohorts treated by nephrologists.}},
author = {{Reinecke, Holger and Breithardt, Günter and Engelbertz, Christiane and Schmieder, Roland E. and Fobker, Manfred and Pinnschmidt, Hans O. and Schmitz, Boris and Bruland, Philipp and Wegscheider, Karl and Pavenstädt, Hermann and Brand, Eva}},
booktitle = {{PLOS ONE}},
issn = {{1932-6203}},
number = {{2}},
publisher = {{Public Library of Science (PLoS)}},
title = {{{Baseline Characteristics and Prescription Patterns of Standard Drugs in Patients with Angiographically Determined Coronary Artery Disease and Renal Failure (CAD-REF Registry)}}},
doi = {{10.1371/journal.pone.0148057}},
volume = {{11}},
year = {{2016}},
}
@misc{11744,
abstract = {{Chronischer Pruritus ist ein hochprävalentes und multifaktorielles Symptom, das hohe Anforderungen an die Diagnostik, Therapie und Beachtung von Begleiterscheinungen (reduzierte Lebensqualität, Schlafstörungen, psychische Faktoren) stellt. Die Versorgung der Patienten ist daher komplex und bedarf auch einer Betrachtung individueller Therapieziele. Neben der Pruritusfreiheit scheinen insbesondere eine Aufklärung der Ursachen sowie ein vertrauensvolles Arzt-Patienten-Verhältnis relevant. Um diesem gerecht zu werden, empfiehlt sich der gezielte Einsatz von Fragebögen zur strukturierten Erhebung von Anamnese, Pruritusintensität, Lebensqualität und Therapieverlauf in der Klinik und Praxis. Dennoch bestehen weiterhin viele administrative und ökonomische Hürden im Gesundheitssystem, um Patienten mit chronischem Pruritus die bestmögliche oder durch Leitlinien empfohlene Versorgung anzubieten. Der Ausbau spezialisierter Zentren und die Schulung von Behandlern sind daher dringend erforderlich.}},
author = {{Ständer, S. and Ständer, H. F. and Steinke, S. and Bruland, Philipp and Dugas, M. and Augustin, M.}},
booktitle = {{Der Hautarzt}},
issn = {{1432-1173}},
number = {{8}},
pages = {{640--647}},
publisher = {{Springer Science and Business Media LLC}},
title = {{{Chronischer Pruritus}}},
doi = {{10.1007/s00105-016-3829-8}},
volume = {{67}},
year = {{2016}},
}
@misc{11745,
abstract = {{Background: Data capture is one of the most expensive phases during the conduct of a clinical trial and the increasing use of electronic health records (EHR) offers significant savings to clinical research. To facilitate these secondary uses of routinely collected patient data, it is beneficial to know what data elements are captured in clinical trials. Therefore our aim here is to determine the most commonly used data elements in clinical trials and their availability in hospital EHR systems.
Methods: Case report forms for 23 clinical trials in differing disease areas were analyzed. Through an iterative and consensus-based process of medical informatics professionals from academia and trial experts from the European pharmaceutical industry, data elements were compiled for all disease areas and with special focus on the reporting of adverse events. Afterwards, data elements were identified and statistics acquired from hospital sites providing data to the EHR4CR project.
Results: The analysis identified 133 unique data elements. Fifty elements were congruent with a published data inventory for patient recruitment and 83 new elements were identified for clinical trial execution, including adverse event reporting. Demographic and laboratory elements lead the list of available elements in hospitals EHR systems. For the reporting of serious adverse events only very few elements could be identified in the patient records.
Conclusions: Common data elements in clinical trials have been identified and their availability in hospital systems elucidated. Several elements, often those related to reimbursement, are frequently available whereas more specialized elements are ranked at the bottom of the data inventory list. Hospitals that want to obtain the benefits of reusing data for research from their EHR are now able to prioritize their efforts based on this common data element list.}},
author = {{Bruland, Philipp and McGilchrist, Mark and Zapletal, Eric and Acosta, Dionisio and Proeve, Johann and Askin, Scott and Ganslandt, Thomas and Doods, Justin and Dugas, Martin}},
booktitle = {{BMC Medical Research Methodology}},
issn = {{1471-2288}},
keywords = {{Clinical trials, Common data elements, Data quality, Electronic health records, Metadata, Secondary use}},
number = {{1}},
publisher = {{Springer Science and Business Media LLC}},
title = {{{Common data elements for secondary use of electronic health record data for clinical trial execution and serious adverse event reporting}}},
doi = {{10.1186/s12874-016-0259-3}},
volume = {{16}},
year = {{2016}},
}
@misc{11769,
editor = {{Hofmann, Martin Ludwig}},
issn = {{2566-8382}},
number = {{8}},
pages = {{130}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe}},
title = {{{52 Grad : Magazin, Stadtplanung }}},
year = {{2016}},
}
@misc{11770,
editor = {{Hofmann, Martin Ludwig}},
issn = {{2566-8382}},
number = {{7}},
pages = {{54}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe}},
title = {{{52 Grad : Magazin, Stadtplanung }}},
year = {{2016}},
}
@misc{12038,
author = {{Kamke, Dominic and Kutz, Gerd and Daniels, R. and Dietrich, S.}},
location = {{Glasgow (Großbritannien)}},
title = {{{Performance qualification of an inline particle sizing probe}}},
year = {{2016}},
}
@misc{12242,
abstract = {{Hutchinson and Löffler's (1956) classification of lakes based on the seasonal thermal mixing regime has become a cornerstone of any analysis of lakes as elements of the earth surface. Until now however the lake classification has lacked a physically sound quantitative criterion distinguishing between two fundamental lake types: thermally stratified during a large portion of the year (mono- and dimictic) and predominantly mixed to the bottom (polymictic). Using the mechanistic balance between potential and kinetic energy we review the different formulations of the Richardson number to derive a generalized scaling for seasonal stratification in a closed lake basin. The scaling parameter is the critical mean basin depth, Hcrit, that delineates lakes that mix regularly from those that stratify seasonally based on lake water transparency, lake length, and an annual mean estimate for the Monin-Obukhov length. We validate the scaling on available data of lakes worldwide using logistic regression. The scaling criterion consistently described the mixing regime significantly better than either the conventional unbounded basin scaling or a simple depth threshold. Thus, the generalized scaling is universal for freshwater lakes and allows the seasonal mixing regime to be estimated without numerically solving the heat transport equations.}},
author = {{Kirillin, G. and Shatwell, Tom}},
booktitle = {{Earth-Science Reviews}},
issn = {{0012-8252}},
keywords = {{Richardson number, Lake classification, Seasonal stratification, Dimixis, Polymixis, Water transparency, Lake databases, Lake modeling, Secchi depth}},
pages = {{179--190}},
publisher = {{Elsevier BV}},
title = {{{Generalized scaling of seasonal thermal stratification in lakes}}},
doi = {{10.1016/j.earscirev.2016.08.008}},
volume = {{161}},
year = {{2016}},
}
@misc{12243,
abstract = {{Water transparency affects the thermal structure of lakes and within certain lake depth ranges, it can determine whether a lake mixes regularly (polymictic regime) or stratifies continuously (dimictic regime) from spring through summer. Phytoplankton biomass can influence transparency but the effect of its seasonal pattern on stratification is unknown. Therefore we analysed long term field data from two lakes of similar depth, transparency and climate but one polymictic and one dimictic and simulated a conceptual lake with a hydrodynamic model. Transparency in the study lakes was typically low during spring and summer blooms and high in between during the clear water phase (CWP), caused when zooplankton graze the spring bloom. The effect of variability of transparency on thermal structure was stronger at intermediate transparency and stronger during a critical window in spring when the rate of lake warming is highest. Whereas the spring bloom strengthened stratification in spring, the CWP weakened it in summer. The presence or absence of the CWP influenced stratification duration and under some conditions determined the mixing regime. Therefore seasonal plankton dynamics, including biotic interactions that suppress the CWP, can influence lake temperatures, stratification duration and potentially also the mixing regime.}},
author = {{Shatwell, Tom and Adrian, Rita and Kirillin, Georgiy}},
booktitle = {{Scientific Reports}},
issn = {{2045-2322}},
number = {{1}},
publisher = {{Springer Science and Business Media LLC}},
title = {{{Planktonic events may cause polymictic-dimictic regime shifts in temperate lakes}}},
doi = {{10.1038/srep24361}},
volume = {{6}},
year = {{2016}},
}
@misc{13645,
abstract = {{Abstract
Many attitudes are acquired in early childhood. However, due to a lack of experimental research, little is known about the processes of how they are acquired. Two experiments were therefore conducted with 153 German kindergarten children aged 3–6 years that provide first evidence for childhood attitude formation in terms of evaluative conditioning. Specifically, it was found that children preferred novel stimuli previously paired with liked stimuli over novel stimuli previously paired with disliked stimuli. This effect occurred independently of age, generalized toward similar novel stimuli, and did not depend on children's recollection of how stimuli were paired. The findings are discussed in terms of the processes underlying childhood attitude formation, and implications for related research areas are highlighted.}},
author = {{Halbeisen, Georg and Walther, Eva and Schneider, Michael}},
booktitle = {{Child Development}},
issn = {{0009-3920}},
number = {{5}},
pages = {{1536--1543}},
publisher = {{Oxford University Press (OUP)}},
title = {{{Evaluative Conditioning and the Development of Attitudes in Early Childhood}}},
doi = {{10.1111/cdev.12657}},
volume = {{88}},
year = {{2016}},
}
@article{2028,
author = {{Bator, Martyna and Fritze, Alexander and Lohweg, Volker}},
issn = {{2364-9208}},
journal = {{Industrie 4.0-Management}},
title = {{{Digitale Dokumentation - Der Einfluss der Digitalisierung auf die technische Dokumentation in der Produktion}}},
volume = {{6}},
year = {{2016}},
}
@inproceedings{2029,
author = {{Pfeifer, Anton and Lohweg, Volker}},
publisher = {{Bildverarbeitung in der Automation (BVAu 2016)}},
title = {{{Design and Implementation for Authenticating Commercial Raster Printing Using Cost-Effective Hardware}}},
year = {{2016}},
}
@article{2030,
author = {{Lohweg, Volker and Mönks, Uwe}},
issn = {{0022-6416}},
journal = {{Unternehmermagazin}},
number = {{3/4}},
title = {{{Schwellwerte und Sensoren - Predictive Maintenance in der Praxis}}},
volume = {{64}},
year = {{2016}},
}
@inproceedings{2031,
abstract = {{Currently, new research questions arise because of the paradigms of Industry 4.0, which aims to bring together mechatronic systems and information technologies. Its general idea is to create an Internet of Things consisting of communicating machines, which implement concepts for self-configuration, -diagnosis, and -optimisation. The realisation of these functionalities is in focus of current research and gains in importance not only in the industrial sector. The overall goal is to equip technical systems with intelligence to enable for autonomous behaviour. Therefore, tasks like information processing, extensive networking, or system monitoring using sensor and information fusion systems have to be reconsidered. This contribution focuses on the design and maintenance of sensor and information fusion systems and presents a preliminary evaluation of a design concept for such applications. The concept is developed to automatically configure sensor and information fusion systems, which is a time-consuming and complex task when carried out manually. It reduces the perceived complexity of the application and supports the designer during design and maintenance of the sensor and information fusion system.}},
author = {{Fritze, Alexander and Mönks, Uwe and Lohweg, Volker}},
booktitle = {{21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016)}},
title = {{{A Concept for Self-Configuration of Adaptive Sensor and Information Fusion Systems}}},
year = {{2016}},
}
@inproceedings{2032,
abstract = {{The way how we interact with banknotes is changing. This raises questions on how we interact with electronic payment systems. The general idea is to design low-cost electronics for cash handling systems. We establish a prototypical demonstrator which allows a consistent image capture quality and is able to handle complex algorithms for banknote authentication on cost-effective hardware. Therefore, tasks regarding reducing the evaluation time, without diminishing the reliability of the algorithms have to be considered. In this contribution we focus on the re-design of an authentication module for detection of commercial offset printing. This module analyses images in view to periodic printing patterns by means of the Discrete Fourier Transform (DFT). We propose to implement two concepts: an adaptive software architecture for DFT and parallel image processing. The re-design reduces evaluation time, without compromising the reliability of the authentication algorithm.}},
author = {{Pfeifer, Anton and Lohweg, Volker}},
booktitle = {{21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016)}},
title = {{{Detection of Commercial Offset Printing using an Adaptive Software Architecture for the DFT}}},
year = {{2016}},
}
@inproceedings{2033,
abstract = {{Cash machines or automated teller machines (ATMs) are one of the typical ways to get cash around the world. Such machines are under a variety of criminal attacks. Most of the manipulations are performed through skimming. In 2014, such attacks led to a damage of approx. 280 million Euro within the EU. In this paper, we propose an approach to detect anomalies and attacks on ATMs via motif discovery. Motifs are frequently unknown occurring sequences or events in a time series signal. State of the ATM is captured by innovative piezoelectric sensor networks to analyse the occurring vibrations. The captured signals are inspected by the Complex Quad-Tree Wavelet Packet transform which provides broad frequency analysis of a signal in various scales. Next, features are extracted from the selected scale based on the information content, to detect motifs. Detected motifs provide the prototype patterns for anomaly detection or classification tasks.}},
author = {{Deppe, Sahar and Dicks, Alexander and Lohweg, Volker}},
booktitle = {{21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, }},
title = {{{Anomaly Detection on ATMs via Time Series Motif Discovery}}},
year = {{2016}},
}
@inproceedings{2036,
abstract = {{In industrial processes a vast variety of different sensors is increasingly used to measure and control processes, machines, and logistics. One way to handle the resulting large amount of data created by hundreds or even thousands of different sensors in an application is to employ information fusion systems. Information fusion systems, e.g. for condition monitoring, combine different sources of information, like sensors, to generate the state of a complex system. The result of such an information fusion process is regarded as a health indicator of a complex system. Therefore, information fusion approaches are applied to, e.g., automatically inform one about a reduction in production quality, or detect possibly dangerous situations. Considering the importance of sensors in the previously described information fusion systems and in industrial processes in general, a defective sensor has several negative consequences. It may lead to machine failure, e.g. when wear and tear of a machine is not detected sufficiently in advance. In this contribution we present a method to detect faulty sensors by computing the consistency between sensor values. The proposed sensor defect detection algorithm exemplarily utilises the structure of a multilayered group-based sensor fusion algorithm. Defect detection results of the proposed method for different test cases and the method's capability to detect a number of typical sensor defects are shown.}},
author = {{Ehlenbröker, Jan-Friedrich and Mönks, Uwe and Lohweg, Volker}},
booktitle = {{Journal of Sensors and Sensor Systems, ISSN 2194-8771}},
publisher = {{Copernicus Publications}},
title = {{{Sensor Defect Detection in Multisensor Information Fusion}}},
year = {{2016}},
}
@inproceedings{2037,
abstract = {{The complexity of industrial applications has constantly increased over the last decades. New paradigms arise in the context of the fourth industrial revolution by bringing together mechatronic systems and information technologies. Tasks like information processing, extensive networking, or system monitoring using sensor and information fusion systems are incorporated with the aim to design applications that are capable for self-configuration, -diagnosis, and -optimisation. This contribution focuses on the design of sensor and information fusion systems. A methodology for the design process of such systems is proposed that serves as tool for auto-configuration to facilitate self-diagnosis and -optimisation.}},
author = {{Fritze, Alexander and Mönks, Uwe and Lohweg, Volker}},
booktitle = {{3rd International Conference on System-Integrated Intelligence - New Challenges for Product and Production Engineering }},
publisher = {{Paderborn, Germany}},
title = {{{A Support System for Sensor and Information Fusion System Design}}},
year = {{2016}},
}
@inproceedings{2038,
author = {{Lohweg, Volker}},
booktitle = {{AMA Wissenschaftsrat, Saarbrücken (eingeladener Vortrag),}},
title = {{{Verteilte attributbasierte Sensor- und Informationsfusion als Basis für Condition Monitoring}}},
year = {{2016}},
}
@inproceedings{2039,
abstract = {{In this paper an advanced approach for Intaglio quality control is presented. In the first step, the essential informationabout the printing process, research objects and measurement setup is provided. Following, the mathematical approachbased on image processing methods is described which imitates the printers manner to examine the optical characteristicsof Intaglio prints. The main focus is the early recognition of tending quality deviations to be able to support the printerthrough recommendations on readjustments of the machine settings. Therefore, specific key values are generated whichdescribe the prints overall quality, regarding its optical characteristics and the occurrence of printing flaws. The resultsshown at the end encourage extended developments.}},
author = {{Funk, Mark and Gillich, Eugen and Türke, Thomas and Lohweg, Volker}},
booktitle = {{Optical Document Security - The Conference on Optical Security and Counterfeit Detection V}},
title = {{{Intaglio Quality Measurement}}},
year = {{2016}},
}
@inproceedings{2040,
abstract = {{Banknote authentication plays a fundamental role in banknote circulation. Banknotes undergo some major changes in thenext years because electronic payment systems will get more common which will change the user behaviour. Furthermore,technologies of counterfeiters will improve progressively and continuously. We propose a two-sage procedure for theeffective development for the design of simple electronics for cash handliung systems: First, we establish a high qualityimage acquisition system which allows for a consistent image capture quality and is able to handle complex softwarealgorithms for banknote authentication. Second, we take the algorithms and port them on cost-efficient hardware. It isshown in this paper that a reliable authentication of almost each banknote is possible for to specialised low-cost systemssuch as point-of-sale cash units.}},
author = {{Gillich, Eugen and Hoffmann, Jan Leif and Dörksen, Helene and Lohweg, Volker and Schaede, Johannes}},
booktitle = {{Optical Document Security - The Conference on Optical Security and Counterfeit Detection V}},
title = {{{Data Collection Unit – A Platform for Printing Process Authentication}}},
year = {{2016}},
}
@inproceedings{2041,
author = {{Schaede, Johannes and Lohweg, Volker and Knobloch, Alexander}},
booktitle = {{Optical Document Security - The Conference on Optical Security and Counterfeit Detection V}},
title = {{{Banknote Cash Challenges met by advancing Low Cost Image Analysis Tools}}},
year = {{2016}},
}
@inproceedings{2042,
abstract = {{Today, a major part of counterfeits is produced by commercial offset printing machines. The counterfeiters use mainlyraster printing (rosette printing). Our approach aims at analysing the banknotes for the presence of commercial printingprocedures by means of intrinsic features. For this purpose, the images are analysed in view to periodic printing patternsby means of the Discrete Fourier Transformation (DFT). The typical raster frequencies are detected. The rosette pattern isseparated by suppression of the remaining image frequencies and the subsequent back-transformation.}},
author = {{Pfeifer, Anton and Gillich, Eugen and Lohweg, Volker and Schaede, Johannes}},
booktitle = {{Optical Document Security - The Conference on Optical Security and Counterfeit Detection V}},
title = {{{Detection of Commercial Offset Printing in Counterfeited Banknotes}}},
year = {{2016}},
}
@inproceedings{2043,
author = {{Lohweg, Volker}},
booktitle = {{Fakultätskolloquium Elektrotechnik und Informationstechnik , Ruhr-Universität Bochum (eingeladener Vortrag)}},
title = {{{How will banknotes change in the next 20 years - towards smart Banknotes?}}},
year = {{2016}},
}
@article{2044,
abstract = {{Sensors, and also actuators or external sources such as databases, serve as data sources in order to realise condition monitoring of industrial applications or the acquisition of characteristic parameters like production speed or reject rate. Modern facilities create such a large amount of complex data that a machine operator is unable to comprehend and process the information contained in the data. Thus, information fusion mechanisms gain increasing importance. Besides the management of large amounts of data, further challenges towards the fusion algorithms arise from epistemic uncertainties (incomplete knowledge) in the input signals as well as conflicts between them. These aspects must be considered during information processing to obtain reliable results, which are in accordance with the real world. The analysis of the scientific state of the art shows that current solutions fulfil said requirements at most only partly. This article proposes the multilayered information fusion system MACRO (multilayer attribute-based conflict-reducing observation) employing the μBalTLCS (fuzzified balanced two-layer conflict solving) fusion algorithm to reduce the impact of conflicts on the fusion result. The performance of the contribution is shown by its evaluation in the scope of a machine condition monitoring application under laboratory conditions. Here, the MACRO system yields the best results compared to state-of-the-art fusion mechanisms. The utilised data is published and freely accessible.}},
author = {{Mönks, Uwe and Dörksen, Helene and Lohweg, Volker and Hübner, Michael}},
issn = {{1424-8220}},
journal = {{Sensors}},
title = {{{Information Fusion of Conflicting Input Data}}},
doi = {{10.3390/s16111798}},
year = {{2016}},
}
@article{2268,
author = {{von Blanckenburg, Korbinian and Strauch, Julian}},
issn = {{0043-6275}},
journal = {{Wirtschaftsdienst}},
number = {{4}},
pages = {{265--272}},
publisher = {{Springer}},
title = {{{Stromersparnis der Zeitumstellung bei privaten Haushalten}}},
doi = {{10.1007/s10273-016-1968-2}},
volume = {{96}},
year = {{2016}},
}
@inbook{2282,
author = {{Barthold, Franz-Joseph and Gerzen, Nikolai and Kijanski, Wojciech and Materna, Daniel}},
booktitle = {{Mathematical Modeling and Optimization of Complex Structures}},
editor = {{Neittaanmäki, Pekka and Repin, Sergey and Tuovinen, Tero}},
isbn = {{978-3-319-23563-9}},
pages = {{229--257}},
publisher = {{Springer-Verlag}},
title = {{{Efficient Variational Design Sensitivity Analysis}}},
year = {{2016}},
}
@article{2309,
author = {{Materna, Daniel}},
journal = {{Proceedings in Applied Mathematics and Mechanics}},
number = {{1}},
pages = {{223--224}},
title = {{{Efficient nonlinear reanalysis for structural modifications}}},
doi = {{10.1002/pamm.201610100}},
volume = {{16}},
year = {{2016}},
}
@article{2337,
author = {{Materna, Daniel and Kalpakides, V. K.}},
journal = {{Computational Mechanics}},
number = {{1}},
pages = {{1--18}},
title = {{{Nonlinear reanalysis for structural modifications based on residual increment approximations}}},
doi = {{10.1007/s00466-015-1209-3}},
volume = {{57}},
year = {{2016}},
}
@article{2338,
abstract = {{In this paper an approach for nonlinear reanalysis based on residual increment approximations (RIA) is presented. The method requires only the evaluation of residual vectors, which can be done very fast and efficient. Moreover, the results are improved by using a rational approximation method. The approach is general and can be applied to linear and nonlinear problems with different kind of design modifications. Furthermore, the proposed method is very efficient and easily to implement in existing finite element programs.}},
author = {{Materna, Daniel}},
journal = {{Proceedings in Applied Mathematics and Mechanics}},
number = {{1}},
pages = {{223--224}},
publisher = {{Wiley Online Library}},
title = {{{Efficient nonlinear reanalysis for structural modifications}}},
doi = {{10.1002/pamm.201610100}},
volume = {{16}},
year = {{2016}},
}
@book{2379,
author = {{Becker, Barbara and Pfannebecker, Jens}},
isbn = {{978-3-95468-388-8}},
pages = {{80}},
publisher = {{Behr`s Verlag}},
title = {{{Lebensmittelassoziierte Viren - Norovirus }}},
year = {{2016}},
}
@inbook{2395,
author = {{Pörtner, R. and Platas Barradas, O. and Frahm, Björn and Hass, V.C.}},
booktitle = {{Current Developments in Biotechnology and Bioengineering: Bioprocesses, Bioreactors and Controls}},
isbn = {{978-0-444-63663-8}},
pages = {{463--493}},
publisher = {{Elsevier}},
title = {{{Advanced Process and Control Strategies for Bioreactors}}},
doi = {{10.1016/b978-0-444-63663-8.00016-1}},
year = {{2016}},
}
@article{2437,
author = {{Upmann, Matthias and Weyland, Gerd}},
issn = {{0015-363x}},
journal = {{Fleischwirtschaft}},
number = {{11}},
pages = {{32--35}},
publisher = {{Dt. Fachverl.}},
title = {{{Was ist erlaubt, was verboten? 12. Lemgoer Lebensmittelrechtstagung Fleisch+ Feinkost- Teil2}}},
volume = {{96}},
year = {{2016}},
}
@article{2552,
author = {{Weyland, Gerd and Stiebing, Achim}},
issn = {{0015-363x}},
journal = {{Fleischwirtschaft : von der Erzeugung bis zur Vermarktung von Lebensmitteln tierischen Ursprungs}},
number = {{9}},
pages = {{70 -- 73}},
title = {{{Was ist erlaubt. was verboten? 10. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost- Teil 2}}},
volume = {{94}},
year = {{2016}},
}
@article{2554,
author = {{Weyland, Gerd and Stiebing, Achim}},
issn = {{0015-363x}},
journal = {{Fleischwirtschaft : von der Erzeugung bis zur Vermarktung von Lebensmitteln tierischen Ursprungs}},
number = {{8}},
pages = {{45 -- 48}},
title = {{{Was ist erlaubt, was verboten? : 10. Lemgoer Lebensmitte lrechtstagung Fleisch+ Feinkost- Teil 1}}},
volume = {{94}},
year = {{2016}},
}
@article{2556,
author = {{Weyland, Gerd and Stiebing, Achim}},
journal = {{Fleischwirtschaft : von der Erzeugung bis zur Vermarktung von Lebensmitteln tierischen Ursprungs}},
number = {{10}},
pages = {{57 -- 61}},
title = {{{Was ist erlaubt, was verboten? 10. Lemgoer Lebensmittelrechtstagung Fleisch+ Feinkost- Teil 3}}},
volume = {{94}},
year = {{2016}},
}
@inproceedings{2608,
author = {{Upmann, Matthias and Hölscher, M. and Lautenschläger, Ralf and Nolte, T. and Zapp, Jürgen}},
location = {{Wien}},
title = {{{Qualitätseigenschaften von Eberfleisch im Vergleich zu Kastraten}}},
year = {{2016}},
}
@inproceedings{2609,
author = {{Upmann, Matthias}},
location = {{Lemgo}},
title = {{{Emotionen rund ums's Schnitzel. Versuch einer Versachlichung}}},
year = {{2016}},
}
@inproceedings{2610,
author = {{Upmann, Matthias}},
location = {{Berlin}},
title = {{{Erhitztes Bindegewebe in Rohwurst. Eine Schönung des Produkts?}}},
year = {{2016}},
}
@inproceedings{2611,
author = {{Upmann, Matthias}},
location = {{Sankt Augustin}},
title = {{{Fleisch vom Bruderhahn – ein besonderes Fleisch?}}},
year = {{2016}},
}
@inproceedings{2612,
author = {{Stiebing, A. and Upmann, Matthias and Lautenschläger, Ralf}},
location = {{Frankfurt/Main}},
title = {{{Verzehrs- und Verarbeitungseigenschaften von Eberfleisch}}},
year = {{2016}},
}
@inproceedings{2613,
author = {{Upmann, Matthias and Röser, Anja and Kaufeld, N.}},
location = {{Garmisch-Partenkirchen}},
title = {{{Histologischer Nachweis von Verdickungsmitteln: Färbestrategie zur Unterscheidung verschiedener Stoffe}}},
year = {{2016}},
}
@inproceedings{2614,
author = {{Upmann, Matthias and Hölscher, M. and Nolte, T. and Zapp, Jürgen and Lautenschläger, Ralf and Stiebing, Achim}},
location = {{Garmisch-Partenkirchen}},
title = {{{Verarbeitung von geruchsabweichendem Eberfleisch. Möglichkeiten und Grenzen.}}},
year = {{2016}},
}
@inproceedings{2615,
abstract = {{Vortrag und Tagungsbandbeitrag}},
author = {{Hölscher, Maike and Nolte, T. and Zapp, Jürgen and Stiebing, Achim and Lautenschläger, Ralf and Upmann, Matthias}},
location = {{Lemgo}},
title = {{{Verarbeitungseignung von Eberfleisch}}},
year = {{2016}},
}
@inproceedings{2616,
author = {{Nolte, T. and Hölscher, M. and Upmann, Matthias and Kothe, A. and Zapp, Jürgen}},
location = {{Lemgo}},
title = {{{Fehlaromen in Eberfleischprodukten. Aktuelle Erkenntnisse.}}},
year = {{2016}},
}
@inproceedings{2617,
author = {{Upmann, Matthias and Langen, M.}},
location = {{Lemgo}},
title = {{{Separation verschiedener Fleischstandards. Neue Anforderungen an technologische Verfahren.}}},
year = {{2016}},
}
@article{2618,
author = {{Weyland, Gerd and Upmann, Matthias}},
issn = {{0015-363x}},
journal = {{Fleischwirtschaft}},
number = {{10}},
pages = {{43--46}},
title = {{{Was ist erlaubt, was verboten? 12. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 1}}},
volume = {{96}},
year = {{2016}},
}
@article{2619,
author = {{Weyland, Gerd and Upmann, Matthias}},
issn = {{0015-363x}},
journal = {{Fleischwirtschaft}},
number = {{12}},
pages = {{46--50}},
title = {{{Was ist erlaubt, was verboten? 12. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 3}}},
volume = {{96}},
year = {{2016}},
}
@inproceedings{272,
author = {{Austermann, Johann and Stuckmann, Tim and Borcherding, Holger}},
booktitle = {{PCIM Europe 2016 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management : Nuremberg, 10-12 May 2016, proceedings / organizer: Mesago PCIM GmbH, Stuttgart }},
isbn = {{978-3-8007-4186-1}},
keywords = {{Leistungselektronik, Erneuerbare Energien, Energiemanagement, Antrieb }},
pages = {{1639--1646}},
publisher = {{VDE Verlag }},
title = {{{ High Efficient Flyback Converter with SiC-MOSFET}}},
year = {{2016}},
}
@misc{3970,
author = {{Schulte, Thomas}},
title = {{{Umlaufgetriebe}}},
year = {{2016}},
}
@inproceedings{4021,
abstract = {{Plug-in hybrid electric vehicles are developed to reduce the fuel consumption and the emission of carbon dioxide. Besides the series, parallel and power split configurations as commonly used for conventional hybrid electric vehicles, multimode transmissions are in particular used for plug-in hybrid electric vehicles, which enable to switch between different modes like parallel or series operation of combustion engine and electric motor. Based on cost efficient configurations of multimode transmissions, improved concepts have already been discussed and presented. These concepts comprise novel structures and multi-speed operation for the combustion engine or the electric motor, respectively. For improving the fuel and energy consumption, a simulation based optimization of a multimode transmission is applied. Since the development of corresponding transmission models is a time-consuming and error-prone task, a method for an automated generation of transmission models is present in this contribution. The generated transmission models are integrated into an overall stationary powertrain model, which is used to optimize an operating strategy and the gear ratios of a multimode transmission with respect to fuel and energy consumption. The optimization is applied to a two and a three speed transmission for the internal combustion engine and to a two speed transmission for the electric motor. Afterwards, the optimization results as well as the fuel and energy saving results are presented.}},
author = {{Geng, Stefan and Herber, Sebastian and Hildebrandt, Willy and Schulte, Thomas}},
booktitle = {{36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles}},
isbn = {{978-1-5108-6958-5}},
location = {{Busan, South Korea }},
publisher = {{Curran Associates, Inc.}},
title = {{{Powertrain Simulation and Optimization of a Multimode Transmission}}},
year = {{2016}},
}
@inproceedings{4022,
author = {{Herber, Sebastian and Horst, J. and Gassmann, T. and Hldebrandt, W. and Haupt, J. and Abbenhaus, M. and Werkhausen, M. and Schulte, Thomas and Maas, Jürgen and Geng, Stefan and Hegger, C.}},
booktitle = {{36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles}},
isbn = {{978-1-5108-6958-5}},
location = {{Busan, South Korea }},
publisher = {{Curran Associates, Inc.}},
title = {{{“Phevplus” - Efficient Plug-in- Hybrid Systems with MRF-Coupling Technology}}},
year = {{2016}},
}
@inproceedings{4023,
abstract = {{Modular power inverter systems for auxiliary drives in utility vehicles can meet various different customer requirements. A model based approach can be used for validating the thermal design of those systems in any suitable modular configuration. This contribution is focused on an equivalent lumped thermal network model for a modular inverter system on a given heat sink concept. The proposed network representation is based on spatial splitting of the heat sink geometry whereby the lumped network elements are parametrized by means of the heat sink geometry. Since the proposed network is easy and straightforward, a minimum of variables are introduced to adjust the temperature results empirically with FEM results on certain reference operation points. Furthermore, modularity is considered due to the coolant and therefore, customer specific placement of modules can be investigated. Finally, the proposed model is compared with FEM results of a worst case system configuration, the influence of the introduced adjustment variables is shown and further validation results with thermal measurements and FEM results of different system configurations are given.}},
author = {{Brose, M. and Düerkop, C. and Schulte, Thomas}},
location = {{Karlsruhe}},
pages = {{1 --10}},
publisher = {{IEEE}},
title = {{{Model based Thermal Evaluation of a Modular Power Inverter System}}},
year = {{2016}},
}
@inproceedings{4024,
abstract = {{For investigating combined grid systems including electrical, thermal and chemical grids, a scientific approach based on Hardware-in-the-loop simulation is carried out where models as virtual energy components are coupled with experimental facilities. In this contribution, a bidirectional fuel cell system is described in detail as a virtual energy component considering the bidirectional fuel cell, the power inverter and the local management. For modelling the bidirectional cell, the electrochemical domain is considered by a physical-based approach in a first step. Common models for unidirectional fuel cells or electrolysis cells are discussed regarding the applicability for bidirectional cells. Afterwards, the DC-DC converter as part of the overall power inverter is considered for modelling. A novel averaged model for the dual active bridge based on the method by Sanders and Verghese is presented. Finally, the overall model and local management of such systems are discussed.}},
author = {{Griese, Martin and Pawlik, Thomas and Schulte, Thomas and Maas, Jürgen}},
issn = {{2166-9546 }},
location = {{Bydgoszcz, Poland }},
pages = {{186 -- 191}},
publisher = {{IEEE}},
title = {{{Electrodynamical modelling of bidirectional fuel cell systems for HIL simulations of combined grid systems}}},
year = {{2016}},
}
@inbook{4025,
abstract = {{Power electronic devices are growing in importance in automotive applications. Power converters are used in hybrid electric vehicles, but also in other vehicle applications like electric steering systems for example. For testing electronic equipment, hardware-in-the-loop (HIL) simulation is a today’s standard method in the automotive industry and other fields, as well. This contribution provides an overview of different average modeling methods for the real-time simulation of power electronics, which are necessary for hardware-in-the-loop simulation. The average models are described and evaluated by the criteria computation effort, algorithmizability, generalizability and platform usability. The results are summarized to give hints to development engineers for choosing a suitable modeling approach for hardware-in-the-loop simulation of their specific applications.}},
author = {{Kiffe, Axel and Schulte, Thomas}},
booktitle = {{Simulation and Testing for Vehicle Technology}},
editor = {{Gühmann, C. and von Rüden, K.}},
isbn = {{978-3-319-32345-9}},
location = {{Berlin}},
pages = {{319 -- 342}},
publisher = {{Springer International Publishing }},
title = {{{Average Models for Hardware-in-the-Loop Simulation of Power Electronic Circuits}}},
year = {{2016}},
}
@inproceedings{4122,
author = {{Dimitrov, Ivan and Schwickert, Susanne and Griese, Martin}},
booktitle = {{ CESBP Central European Symposium on Building Physics/BauSIM 2016}},
editor = {{Grunewald, John}},
location = {{Dresden}},
publisher = {{Fraunhofer IRB Verlag }},
title = {{{Ganzheitliche energetische Modellierung von Privathaushalten unter Berücksichtigung von Gebäudestruktur und Nutzerverhalten}}},
year = {{2016}},
}
@article{4188,
author = {{Bendig, Tom and Borcherding, Holger}},
issn = {{0019-9036}},
journal = {{Industrieanzeiger}},
number = {{11}},
pages = {{48 -- 50}},
publisher = {{Konradin-Verl.}},
title = {{{Teillast vollständig beherrschen. Energieeffizienz im Fokus von Industrie 4.0}}},
volume = {{138}},
year = {{2016}},
}
@article{4189,
author = {{Bendig, Tim and Borcherding, Holger}},
issn = {{1867-2590}},
journal = {{Mechatronik. Design Entwicklung Integration}},
number = {{6}},
pages = {{14 -- 16}},
publisher = {{Informationsgesellschaft Technik}},
title = {{{Teillast beherrschen. Energieeffizienz für Industrie 4.0 betrachtet}}},
volume = {{124}},
year = {{2016}},
}
@inproceedings{4260,
author = {{Austermann, Johann and Stuckmann, Tim and Borcherding, Holger}},
booktitle = {{PCIM Europe 2016}},
isbn = {{978-3-8007-4186-1}},
location = {{Nuremberg}},
pages = {{1639 -- 1646}},
publisher = {{VDE-Verlag}},
title = {{{High Efficient Flyback Converter with SiC-MOSFET}}},
year = {{2016}},
}
@inproceedings{4292,
abstract = {{This paper introduces an efficient modular solution kit for intralogistic drives, which reduces the total energy consumption of all drives in an automated warehouse by more than 15%. The reduction of energy consumption results from the interaction of optimized components (motors, control techniques and regeneration units), which are described in detail in this paper. Different motor concepts like the induction motor, the synchronous reluctance motor and the permanent magnet synchronous machine are compared according to the special requirements for intralogistics applications. Different control techniques are presented in order to achieve sensorless and efficient-optimal operation of these motors. The sensorless control technique uses signal injection to detect the rotor position sufficiently exact also in case of speed near standstill. Efficient-optimal operation is achieved by reducing the motor current with regard to the torque (MTPA-control). Furthermore this paper introduces a regeneration unit that can be connected between the DC link of frequency inverters and the mains to feed back regenerative energy. The regeneration unit consisting of a buck converter, a synchronous inverter and a line-filter can work in parallel to commonly used uncontrolled rectifiers. Its functioning is shown with the help of measurement results of a 1kW laboratory prototype. The last section shows a demonstrator in which a conventional conveyer system (with induction motor and braking resistor) is compared with an optimized one using the presented components. Power versus time measurements show specific energy savings resulting from the interaction of the optimized components.}},
author = {{Austermann, Johann and Borcherding, Holger and Stichweh, H. and Grabs, V.}},
booktitle = {{2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe)}},
location = {{Karlsruhe, Germany }},
publisher = {{IEEE}},
title = {{{High efficient modular drive system — An ideal approach for green intralogistics applications}}},
year = {{2016}},
}
@inproceedings{4293,
abstract = {{Three different control methods for a five-phase permanent magnet synchronous motor are presented and compared to each other. The control schemes include rotor-fixed approaches known as Field Orientated Control and stator-fix approaches like Direct Torque Control and Indirect Self Control. Simulations are carried out and are compared to measurement results.}},
author = {{Jonsky, T. and Borcherding, Holger and Szymanski, P. and Wettlaufer, P. and Theßling, M.}},
booktitle = {{2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe)}},
location = {{Karlsruhe, Germany }},
publisher = {{IEEE}},
title = {{{Comparison of control methods for H-bridge fed five-phase permanent magnet synchronous motors (peer reviewed!)}}},
doi = {{10.1109/EPE.2016.7695572}},
year = {{2016}},
}
@inbook{4298,
abstract = {{In this paper, we present the current state-of-the-art of decision making (DM) and machine learning (ML) and bridge the two research domains to create an integrated approach of complex problem solving based on human and computational agents. We present a novel classification of ML, emphasizing the human-in-the-loop in interactive ML (iML) and more specific on collaborative interactive ML (ciML), which we understand as a deep integrated version of iML, where humans and algorithms work hand in hand to solve complex problems. Both humans and computers have specific strengths and weaknesses and integrating humans into machine learning processes might be a very efficient way for tackling problems. This approach bears immense research potential for various domains, e.g., in health informatics or in industrial applications. We outline open questions and name future challenges that have to be addressed by the research community to enable the use of collaborative interactive machine learning for problem solving in a large scale.}},
author = {{Robert, Sebastian and Büttner, Sebastian and Röcker, Carsten and Holzinger, Andreas}},
booktitle = {{Machine Learning for Health Informatics : State-of-the-Art and Future Challenges }},
editor = {{Holzinger, Andreas}},
isbn = {{978-3-319-50477-3 }},
keywords = {{Decision making, Reasoning, Interactive machine learning, Collaborative interactive machine learning}},
pages = {{357--376}},
publisher = {{Springer}},
title = {{{Reasoning Under Uncertainty: Towards Collaborative Interactive Machine Learning}}},
doi = {{10.1007/978-3-319-50478-0_18}},
volume = {{9605}},
year = {{2016}},
}
@inproceedings{4299,
abstract = {{With the advances of technology, intelligent assistive systems that adapt to individual humans will become feasible. However, application areas of such systems are rarely discussed within the Industry 4.0 community. Most assistive systems that have been presented have been developed for specific task, such as assembly support or warehouse picking, but there might be a huge uncovered design space to be explored. With this work, we want to step back from existing systems and analyze the design opportunities of assistive systems especially for small and medium-size enterprises (SME). To achieve this goal we conducted a study in four SME, consisting of observations and interviews. Here we present our findings about the potential future application areas of human-centered assistive systems.}},
author = {{Mucha, Henrik and Büttner, Sebastian and Röcker, Carsten}},
booktitle = {{Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 }},
keywords = {{Industry 4.0, Assistive Systems, Small and Medium-Sized Enterprises, SME, Human-Centered Design, Human-Computer Interaction for Industry}},
location = {{Graz, Austria}},
publisher = {{TU}},
title = {{{Application Areas for Human-Centered Assistive Systems}}},
year = {{2016}},
}
@inproceedings{4300,
abstract = {{Human-centered design methods are nowadays widely used in the design of consumer products. These methods aim at designing products with a high usability and a positive user experience (UX). However, in the domain of the design of industrial machines, design is often driven by functional requirements mostly neglecting the usability and user experience of products. Together with a medium-sized manufacturer of industrial laundry machines we applied the human-centered design process in an industrial context. In this field report, we describe the human-centered design methods applied in the project, the adaptations we had to make in the process and the challenges and opportunities for applying human-centered design in an industrial environment in general. }},
author = {{Büttner, Sebastian and Röcker, Carsten}},
booktitle = {{Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016}},
keywords = {{Design Methods, Human-Centered Design, Industrial Human-Computer Interaction, Industry 4.0}},
location = {{Graz, Austria}},
publisher = {{TU}},
title = {{{Applying Human-Centered Design Methods in Industry – a Field Report}}},
year = {{2016}},
}
@inbook{4302,
abstract = {{In this paper we present smARt.assembly – a projection-based augmented reality (AR) assembly assistance system for industrial applications. Our system projects digital guidance information in terms of picking information and assembly data into the physical workspace of a user. By using projections, we eliminate the use of smart glasses that have drawbacks such as a limited field of view or low wearing comfort. With smARt.assembly, users are able to assemble products without previous knowledge and without any other assistance.}},
author = {{Sand, Oliver and Büttner, Sebastian and Paelke, Volker and Röcker, Carsten}},
booktitle = {{18th International Conference on Human-Computer Interaction (HCII '16)}},
editor = {{Lackey, Stefanie and Shumaker, Randall}},
isbn = {{978-3-319-39906-5}},
keywords = {{Augmented reality, Projection, Assembly work, Manual assembly}},
location = {{Toronto, Canada}},
pages = {{643--652}},
publisher = {{Springer}},
title = {{{smARt.Assembly: Projection-Based Augmented Reality for Supporting Assembly Workers}}},
doi = {{10.1007/978-3-319-39907-2_61}},
volume = {{9740}},
year = {{2016}},
}
@inproceedings{4303,
abstract = {{The increasing demand to customize products affects production workers in many industries, as assembly tasks become more complex due to higher product variety. Assistive systems providing instructions at the workplace have been proposed to overcome increasing cognitive demand during assembly tasks. Commercially available assistive systems provide spatially registered instructions, either by using in-situ projections or head-mounted displays (HMDs). As there is little empirical knowledge about the individual advantages and disadvantages of both approaches, we are interested in comparing both types of systems. Through a user study at a manual assembly workplace, we compare both approaches to a paper baseline. Our results reveal that both in-situ instructions and paper instructions lead to significantly faster task completion times and significantly fewer errors than HMDs. Using additional questionnaires and interviews, we are able to identify the shortcomings of HMD-based instructions and discuss the possibilities of using flexible in-situ instructions for worker assistance.}},
author = {{Büttner, Sebastian and Funk, Markus and Sand, Oliver and Röcker, Carsten}},
booktitle = {{9th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA '16) }},
isbn = {{978-1-4503-4337-4}},
keywords = {{Spatial Augmented Reality, Industrial Augmented Reality, Projection-based Augmented Reality, Head-Mounted Display, Manufacturing, Assistive System}},
location = {{Corfu; Greece }},
pages = {{1--8}},
publisher = {{ACM}},
title = {{{Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison}}},
doi = {{10.1145/2910674.2910679}},
year = {{2016}},
}
@inproceedings{4304,
author = {{Behlen, Manuel and Büttner, Sebastian and Schmidt, Sebastian and Pyritz, Sarah and Röcker, Carsten}},
booktitle = {{Automation 2016 : secure & reliable in the digital world : 17. Branchentreff der Mess- und Automatisierungstechnik : Kongresshaus Baden-Baden, 07. und 08. Juni 2016 }},
isbn = {{978-3-18-092284-3}},
location = {{Baden-Baden}},
pages = {{169--1970}},
publisher = {{VDI}},
title = {{{Multitouch im industriellen Umfeld: Evaluierung bestehender Systeme, identifizierte Anwendungsszenarien und Handlungsempfehlungen für zukünftige Systeme}}},
volume = {{2284}},
year = {{2016}},
}
@inproceedings{4308,
author = {{Pfeifer, Anton and Lohweg, Volker}},
booktitle = {{BVAu 2016}},
editor = {{Lohweg, Volker}},
isbn = {{978-3-9814062-7-6}},
location = {{Lemgo}},
number = {{5}},
pages = {{1 -- 9}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Authentication of Commercial Raster Printing on Cost-Effective Hardware}}},
volume = {{2016}},
year = {{2016}},
}
@inproceedings{4328,
abstract = {{This paper discusses the relevance of beauty and aesthetic values for an aesthetically pleasing design of technology-enhanced spaces in the context of ergonomics, usability, and technology acceptance. Under the concept of Aesthetic Intelligence we subsume various aspects, including conceptual scoping, formal design skills and creative methodologies. Our goal is to provide a concept for the exchange of ideas, initiation of collaborations and the development of methodological practices for facilitating effective and pleasurable designs.}},
author = {{Plewe, Daniela Alina and Röcker, Carsten}},
booktitle = {{Advances in Affective and Pleasurable Design}},
editor = {{Chung, WonJoon and Shin, Cliff Sungsoo }},
isbn = {{978-3-319-41660-1}},
keywords = {{Aesthetic intelligence, Aesthetics, Design methodologies, Ambient intelligent systems}},
location = {{Walt Disney World®, Florida, USA}},
pages = {{385--390}},
publisher = {{Springer}},
title = {{{Aesthetic Intelligence for Effective and Pleasurable Design}}},
doi = {{10.1007/978-3-319-41661-8_37}},
volume = {{483}},
year = {{2016}},
}
@inproceedings{4459,
author = {{Kutz, Gerd}},
location = {{Köln}},
title = {{{APV basics}}},
year = {{2016}},
}
@inproceedings{457,
abstract = {{Additive Manufacturing (AM) increasingly enables the realization of structures, which have a much greater freedom of design und can therefore better use nature as a design ideal. Bionic design principles have already been introduced into general design approaches, and several topology optimization systems (TO) are available today to increase structural stiffness and to enable lightweight design. AM and TO, used in synergy, promise completely new application areas. However, staircase effects resulting from a layer-by-layer build process and unavoidable support structures which must be mechanically removed afterwards are disadvantageous with respect to surface texture and strength properties.
The present article addresses the question of how far the notches resulting from the staircase effect of Additive Manufacturing and the support structures removed decrease the strength of components. Most engineers try to follow the inner flow of forces in a part’s design by smoothening surfaces in notched areas. Considering this, a elected component is investigated with finite element analysis (FEA) with special regard for the concentration of tress arising from surface notch effects. An outlook is given as regards how a reduction of the notch effect from the taircase effect can be achieved effectively.}},
author = {{Scheideler, Eva and Villmer, Franz-Josef and Adam, G. and Timmer, Mirco}},
booktitle = {{Production Engineering and Management Proceedings 6th International Conference}},
editor = {{Villmer, Franz-Josef and Padoano, Elio}},
isbn = {{978-3-946856-00-9}},
keywords = {{Additive Manufacturing, Topology optimization, Staircase effect, Support structures, Stress concentration, Lightweight construction, Design rules, Notch effect}},
location = {{Lemgo}},
number = {{1}},
pages = {{39--50}},
title = {{{Topology Optimization and Additive Manufacturing – A Perfect Symbiosis?}}},
year = {{2016}},
}
@inproceedings{472,
abstract = {{In the context of Industrie 4.0 respectively direct digital manufacturing, seamless process chains are an important factor. The objective is to shorten the time between quoting for individually designed products and their production and delivery. Therefore, reliable automated and fast evaluation procedures are needed to ensure the quality of the individually designed products in terms of product safety and reliability. This paper aims
to demonstrate how a metamodel, generated on simulated data, adapts to the type of product and delivers the required quality and evaluation procedure. The metamodel guarantees the requested characteristics of the final product without the consultation of human expert knowledge. As proof of concept, a simple, well-documented task from the field of construction has been chosen. The estimation from of the metamodel will meet all safety requirements, is based on the individual input variables and is confirmed without expert interaction. Fast, reliable prediction models deriving from complex simulation models are indispensable conditions for direct digital manufacturing. Using metamodels in automation contexts will be a foundation of manufacturing in future.}},
author = {{Scheideler, Eva and Ahlemeyer-Stubbe, Andrea}},
booktitle = {{Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany }},
editor = {{Villmer, Franz-Josef and Padoano, Elio}},
keywords = {{Simulation, Metamodel, Computer experiment, Design of experiments}},
location = {{Lemgo}},
number = {{1}},
pages = {{269--280}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments}}},
volume = {{2016}},
year = {{2016}},
}
@inproceedings{473,
abstract = {{Additive Manufacturing (AM) describes a number of technologies that generate three-dimensional objects directly from CAD data by joining volume elements. Dental technology is one sector in which the benefits of AM come into effect, as parts such as frameworks or implants are unique objects often with freeform shapes. These objects are difficult and expensive to produce with subtractive or formative technology.
During the last decades, the application of digital technologies in the dental industry has increased. Therefore AM has also evolved to become a standard dental framework manufacturing process. While previously the dental laboratory did the complete manufacturing of dental frameworks, AM parts are usually produced by service providers, thus increasing the number of process participants. Under these circumstances, a reliable high quality production must be ensured. This requires a comprehensive Quality Management (QM) concept for the whole process chain. A first step in the evelopment of this QM concept is the definition of the product requirements, from which process specifications can be determined. These specifications build the basis for evaluating the process capability of the Additive Manufacturing process.}},
author = {{Huxol, Andrea and Villmer, Franz-Josef}},
booktitle = {{Production Engineering and Management}},
editor = {{Villmer, Franz-Josef and Padoano, Elio}},
keywords = {{Additive Manufacturing, Dental frameworks, Quality management, Digital manufacturing}},
location = {{Lemgo}},
number = {{1}},
pages = {{15--26}},
title = {{{Special Requirements for Additive Manufacturing of Dental Frameworks}}},
year = {{2016}},
}
@misc{8094,
author = {{Velte, Patrick and Stawinoga, Martin}},
booktitle = {{StuB: Unternehmensteuern und Bilanzen}},
issn = {{1615-8024}},
number = {{8}},
pages = {{297--302 }},
publisher = {{NWB Verlag }},
title = {{{Neuerungen durch das Abschlussprüfungsreformgesetz (AReG) – Zentrale Reformmaßnah- men zum Verhältnis zwischen Prüfungsausschuss und Abschlussprüfer, in: Unternehmensteuern und Bilanzen }}},
year = {{2016}},
}
@misc{8109,
author = {{Hao, M. and Karsthof, L. and Rust, J. and Block, Dimitri and Meier, Uwe and Paul, S.}},
booktitle = {{KommA 2016 – Jahreskolloquium Kommunikation in der Automation}},
publisher = {{Jahreskolloquium Kommunikation in der Automation - KommA}},
title = {{{Hardwarebasiertes Koexistenzmanagement für echtzeitfähige, industrielle Funksysteme}}},
year = {{2016}},
}
@misc{8110,
author = {{Karsthof, L.S. and Hao, M. and Rust, J. and Paul, S. and Meier, Uwe and Block, D.}},
booktitle = {{IEEE Nordic Circuits and Systems Conference - NORCAS 2016}},
publisher = {{IEEE Nordic Circuits and Systems Conference - NORCAS}},
title = {{{Dynamically Reconfigurable Real-Time Hardware Architecture for Channel Utilisation Analysis in Industrial Wireless Communication}}},
year = {{2016}},
}
@misc{8111,
author = {{Block, D. and Meier, Uwe}},
booktitle = {{KommA 2016 – Jahreskolloquium Kommunikation in der Automation}},
publisher = {{Jahreskolloquium Kommunikation in der Automation - KommA}},
title = {{{Discrete-Event Simulation of Wireless Coexistence for Industrial Applications: Requirements and Solutions}}},
year = {{2016}},
}
@misc{8112,
author = {{Block, D. and Schmidt, M. and Dürkop, L. and Wiebusch, N. and Meier, Uwe}},
booktitle = {{21st IEEE Conference on Emerging Technologies and Factory Automation - ETFA 2016}},
publisher = {{IEEE Conference on Emerging Technologies and Factory Automation - ETFA}},
title = {{{Coexistence of Wireless Control Systems: An Integral Event-based Simulation Approach}}},
year = {{2016}},
}
@misc{8113,
author = {{Block, D. and Töws, D. and Meier, Uwe}},
booktitle = {{EUSIPCO 2016 - European Signal Processing Conference}},
publisher = {{European Signal Processing Conference - EUSIPCO}},
title = {{{Implementation of Efficient Real-Time Industrial Wireless Interference Identification Algorithms with Fuzzified Neural Networks}}},
year = {{2016}},
}
@misc{8224,
abstract = {{- Eine erste Bestandsaufnahme unter besonderer Berücksichtigung der empirischen Relevanz des Deutschen Nachhaltigkeitskodex (DNK) -
Nach den negativen Erfahrungen der letzten Finanzkrise 2008/09 gewinnt in der EU die nichtfinanzielle Berichterstattung an Bedeutung. Infolge der Veröffentlichung der CSR-RL 2014/95/EU sind die EU-Mitgliedstaaten mit der Transformation der Vorgaben in nationales Recht konfrontiert. Das BMJV hat am 11.03.2016 den Referentenentwurf eines CSR-Richtlinie-Umsetzungsgesetzes verabschiedet. Demnach sind bestimmte große Unternehmen, Kreditinstitute sowie Versicherungsunternehmen erstmalig für ab dem 01.01.2017 beginnende Geschäftsjahre zur Veröffentlichung einer nichtfinanziellen Erklärung verpflichtet. Dieser neuartigen Berichtspflicht kann entweder innerhalb des (Konzern-)Lageberichts oder durch die Aufstellung eines eigenständigen Berichts - bspw. auf der Grundlage der Empfehlungen des Deutschen Nachhaltigkeitskodex (DNK) - nachgekommen werden. Eine Auswertung öffentlich zugänglicher Entsprechenserklärungen gibt Hinweise, inwiefern das derzeitige Berichterstattungsverhalten nach dem DNK als möglicher Referenzrahmen für die nichtfinanzielle Erklärung einbezogen werden kann.
}},
author = {{Stawinoga, Martin and Velte, Patrick}},
booktitle = {{DB: Der Betrieb}},
number = {{15}},
pages = {{841--847}},
publisher = {{Handelsblatt Fachmedien}},
title = {{{Der Referentenentwurf für ein CSR-Richtlinie-Umsetzungsgesetz – Eine erste Bestandsaufnahme unter besonderer Berücksichtigung der empirischen Relevanz des Deutschen Nachhaltigkeitskodex (DNK)}}},
year = {{2016}},
}
@misc{8225,
abstract = {{Mögliche Implikationen für die handelsrechtliche Umsetzung der "EU-CSR-Richtlinie" bei der nicht finanziellen Erklärung vor dem Hintergrund internationaler Forschungsergebnisse -
Durch die sog. EU-CSR-Richtlinie müssen bestimmte Unternehmen ab dem 01.01.2017 eine nicht finanzielle Erklärung erstellen, die in den (Konzern-)Lagebericht, einen eigenständigen Nachhaltigkeitsbericht oder Integrated Report eingegliedert werden kann. Neben diesem Ausweiswahlrecht besteht die Möglichkeit, die formelle Prüfung um eine materielle Beurteilung der CSR-spezifischen Informationen durch eine unabhängige Instanz zu erweitern. Wenngleich die nationale Umsetzung der EU-CSR-Richtlinie noch aussteht, hat sich das BMJV in einem Konzeptpapier für eine Weiterleitung der Mitgliedstaatenwahlrechte an die Unternehmen ausgesprochen. Da die (freiwillige) Offenlegung von geprüften Nachhaltigkeitsberichten aus internationaler Sicht in den letzten Jahren stark zugenommen hat, ist es wenig verwunderlich, dass sich die empirische CSR-Forschung aus internationaler Sicht diesem Thema angenommen hat. Der Beitrag stellt die zentralen Ergebnisse empirischer Studien zu Ursache-Wirkung-Beziehungen bei der (freiwilligen) Prüfung von Nachhaltigkeitsberichten vor, die Impulse für die künftige Regulierung der nicht finanziellen Erklärung im deutschen Handelsrecht geben.
}},
author = {{Velte, Patrick and Stawinoga, Martin}},
booktitle = {{Der Konzern: Zeitschrift für Gesellschaftsrecht, Steuerrecht, Bilanzrecht und Rechnungslegung der verbundenen Unternehmen}},
issn = {{1611-2296}},
number = {{1}},
pages = {{13--19}},
publisher = {{Handelsblatt Fachmedien}},
title = {{{Prüfung von Nachhaltigkeitsberichten – Mögliche Implikationen für die handelsrechtliche Umsetzung der „EU-CSR-Richtlinie“ bei der nicht finanziellen Erklärung vor dem Hintergrund internationaler Forschungsergebnisse}}},
year = {{2016}},
}
@inbook{8226,
author = {{Velte, Patrick and Stawinoga, Martin}},
booktitle = {{Integrated Reporting – Grundlagen, Implementierung, Praxisbeispiele}},
editor = {{Bassen, Alexander and Günther, Edeltraud}},
isbn = {{9783791033648}},
pages = {{261--264}},
publisher = {{Schäffer Poeschel }},
title = {{{Integrated Reporting zwingt die Unternehmen zu einer konsequenten Reorganisation der Berichtsstrukturen}}},
year = {{2016}},
}
@misc{8227,
abstract = {{
Nach der Finalisierung der europäischen Abschlussprüferreform (Richtlinie 2014/56/EU sowie Verordnung (EU) Nr. 537/2014) müssen die Mitgliedstaaten die neuen Regelungen bis Mitte Juni 2016 in nationales Recht umsetzen bzw. anwenden. Als vorgezogenes Weihnachtsgeschenk wurde zum Jahresende einerseits der RegE des geplanten Abschlussprüfungsreformgesetzes (AReG-RegE) veröffentlicht, der die maßgeblichen gesellschafts- und handelsrechtlichen Novellierungen (z.B. externe Rotation, Begrenzung von Prüfung und Beratung) enthält. Andererseits wurde im Dezember 2015 auch das Abschlussprüferaufsichtsreformgesetz (APAReG) verabschiedet, das die berufsaufsichtrechtlichen Neuerungen (primär der WPO) beinhaltet.}},
author = {{Velte, Patrick and Stawinoga, Martin}},
booktitle = {{DB: Der Betrieb}},
issn = {{0005-9935}},
number = {{5}},
pages = {{M5}},
publisher = {{Verl.-Gruppe Handelsblatt}},
title = {{{APAReG und AReG-RegE – Überregulierung oder Innovation?}}},
year = {{2016}},
}
@misc{8228,
author = {{Stawinoga, Martin and Velte, Patrick}},
booktitle = {{WPg: Die Wirtschaftsprüfung}},
issn = {{0340-9031 }},
number = {{24}},
pages = {{1339}},
publisher = {{IdW-Verl.}},
title = {{{Sustainability Accounting and Accountability, von: Bebbington, J., Unerman, J., O´Dwyer, B. (Eds.), Second edition}}},
year = {{2016}},
}
@misc{8229,
author = {{Velte, Patrick and Stawinoga, Martin}},
booktitle = {{Die Aktiengesellschaft : AG ; Zeitschrift für das gesamte Aktienwesen, für deutsches, europäisches und internationales Unternehmens- und Kapitalmarktrecht}},
issn = {{0002-3752}},
number = {{3}},
pages = {{99--100}},
publisher = {{Schmidt}},
title = {{{Festschrift für Wilhelm Haarmann, von: Blumenberg, J., Crezelius, G., Gosch, D., Schüppen, M. (Hrsg.)}}},
year = {{2016}},
}
@misc{8410,
author = {{Beckmann, Nils and Moseler, Michael}},
booktitle = {{WT Werkstattstechnik Online (VDI)}},
issn = {{1436-4980}},
number = {{1}},
pages = {{51}},
publisher = {{VDI Fachmedien GmbH & Co. KG}},
title = {{{Verschleiß im Reibkontakt durch Auffaltung der Metalloberfläche: Aufdeckung der Verschleißmechanismen im spanenden Reibkontakt mit atomarer Simulation und Experimenten}}},
year = {{2016}},
}
@misc{846,
author = {{Treptow, Melanie}},
keywords = {{Corporate Design}},
pages = {{108}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Entwicklung eines Stadtlogos als Beitrag zur städtischen Entwicklung der Alten Hansestadt Lemgo}}},
year = {{2016}},
}
@misc{8611,
author = {{Köhler, Martin}},
booktitle = {{Seminar "Flächenbefestigungen aus Beton- und Natursteinpflaster"}},
location = {{Neuwied}},
publisher = {{Materialprüfungs- und Versuchsanstalt Neuwied}},
title = {{{Fugen- und Bettungsmaterialien}}},
year = {{2016}},
}
@misc{8612,
author = {{Köhler, Martin}},
booktitle = {{Lithonplus-Symposium 2016}},
location = {{Schwerin}},
publisher = {{Lithonplus}},
title = {{{Fugen- und Bettungsmaterialien}}},
year = {{2016}},
}
@misc{878,
abstract = {{In dieser Arbeit wird die Frage behandelt, ob eine digitale Kopie eines Filmstreifen in der Lage wäre, diesen langfristig zu ersetzen. Filmstreifen unterliegen chemischen Prozessen, welche diesen nach und nach zersetzen. Selbst die Lagerung unterhalb des Gefrierpunktes kann dies nicht verhindern. Als Mittel diese Kopien zu retten wird neben dem Umkopieren auch zur Digitalisierung des Films gegriffen. Im ersten Abschnitt dieser Arbeit wird auf diese Zersetzung, die Möglichkeiten die Schäden durch analoge und digitale Restauration zu korrigieren und den Digitalisierungsvorgang eingegangen. Zum Ende dieses Abschnitts wird aufgezeigt, dass die Digitalisierung bislang sehr strukturlos erfolgt. Es fehlt an Mitteln für eine ausreichende flächendeckende Umsetzung mit einhergehender Restauration. Der zweite Abschnitt widmet sich den Ursachen und Gründen. So ist der zuvor erwähnte chemische Zersetzungsprozess ein wesentlicher Grund für die Digitalisierung. Chemische Restauration gelangt bei stärker beschädigten Filmen zudem schnell an ihre Grenzen, sodass die Anwendung digitaler Werkzeuge oftmals die einzige Rettung für beschädigte Kopien ist. Ferner wird darauf eingegangen, dass das wiederholte analoge Umkopieren auf Filmstreifen zu einem qualitativen Verlust in den Kopiengenerationen führt. Politische Veränderungen, wie die Digitalisierung der Kinobranche führen zudem zu einer reihenweisen Schließung von analogen Kopierwerken. Mittelfristig wird sowohl das Material zum Kopieren, als auch das Know-How dazu verloren gehen. Dies zeigt auch das inzwischen ausgeprägte Verlangen von digitalen Fassungen bei Anfragen an die Archive. Der digitale Wandel erfordert digitale Inhalte. Nur durch Digitalisierung können langfristig die Filme noch zugänglich gemacht werden. Die Notwendigkeit sich als Archiv mit der Haltung digitaler Filme auseinanderzusetzen, wird auch durch die Einlagerungspflicht geförderter Filme in anerkannten Archiven unterstrichen. Diese werden dank digitalem Workflow inzwischen fast ausschließlich nur noch digital eingereicht. Im letzten Abschnitt werden die Folgen aus der Digitalisierung und die Anforderungen an sogenannte digitale Master behandelt. Mit dem Fokus auf digitale Inhalte verliert sich zunehmend die Unterstützung von Filmstreifen, was zu einem Verlust eines künstlerischen Mediums führt. Die Kehrseite der Medaille ist jedoch auch der Gewinn neuer Möglichkeiten wie grundsätzlich der Schaffung von Zugang zu Inhalten durch digitale Systeme sowie der vereinfachten Nutzung und Distribution. Darüber hinaus kann die hohe Bildqualität, welche aus digitalisierten Filmstreifen gewonnen werden kann, einen Mangel an hochauflösenden Inhalten in 4K und höher ausgleichen. Zudem unterliegen immaterielle Inhalte keiner Abnutzung. Ethisch betrachtet birgt die Digitalisierung viel Raum für Verfälschung. Mit dem Ziel Filme authentisch bewahren zu wollen, können während der Verarbeitung unbewusst wie auch bewusst Veränderungen vorgenommen werden, welche die Authentizität des Inhalts verletzt. Dies kann durch zu gut gemeinte digitale Restauration geschehen, als auch durch bewusste Veränderung von Inhalten um zum Beispiel einer damaligen Intention des Filmemachers mit modernen Mitteln unterstützend nachzukommen. Zudem stellt sich die Frage, ob eine Kopie nach ihrer Digitalisierung aufbewahrt werden soll oder nicht. Das Vernichten von Originalen würde die Chance rauben diese gegebenenfalls durch spätere, bessere technische Möglichkeiten erneut digitalisieren zu können. Letztlich wird in diesem Abschnitt noch auf die Anforderungen, welche denn eine digitale Kopie erfüllen müsste, eingegangen. So werden Auflösung, Farbtiefe, Tonqualität und ähnliches anhand bestehender Filmformate, der technischen Entwicklung der letzten Jahre und der menschlichen Wahrnehmung untersucht. Um eine langfristig sichere Speicherung zu gewährleisten ist die Sicherung in offenen Format ein nächster Punkt unter den Anforderungen. Hier wird jedoch deutlich, dass es unter den Archiven selbst bisher keinen Konsens über einheitliche Formate gibt. Noch schwieriger ist die Frage nach der richtigen Speicherstrategie. Ein Digitalisat erreicht schnell Speichermengen von mehreren Terabyte. Festplatten und Datenbänder sind dabei ein guter Ansatz, bieten jedoch keine vergleichsweise so langlebige Haltbarkeit wie Filmstreifen. Zudem wird Migration ein ständiger Begleiter digitaler Archive bleiben. Im Ergebnis muss festgehalten werden, dass Digitalisierung qualitativ durchaus ein Ersatz darstellt. Im Sinne einer langfristigen Archivierung ist diese jedoch fragwürdig. Die Digitalisierung sollte daher mehr als die Schaffung eines Zugangs zu Archivhinhalten gesehen werden. }},
author = {{Backhaus, Jürgen}},
keywords = {{Acetatfilm, Digitalisierung, Film, Filmstreifen, Nitrofilm, Archivierung, Digitalisierung, Film, Langzeitarchivierung}},
pages = {{236}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Kann die Digitalisierung 'alter Filme' ein Ersatz für das analoge Original sein?}}},
year = {{2016}},
}
@misc{880,
abstract = {{Ziel dieser Arbeit ist es, für den freiberuflichen Hochzeitsfotografen André Fister, ein stimmiges Erscheinungsbild mit Hilfe einer Corporate Identity zu entwickeln, um seine Stellung innerhalb der Branche zu festigen und seine Bekanntheit zu fördern. Dabei ist es wichtig für André Fister eine einzigartige Identität zu entwickeln, die seine eigene Persönlichkeit unterstreicht, seine Qualitäten hervorhebt und bei seinen Kunden einen positiven Gesamteindruck hinterlässt. Hierzu gehört nicht nur die Gestaltung eines Logos und der dazu gehörigen Geschäftsausstattung, sondern auch die Entwicklung einer Strategie für die Art der Kommunikation und dem Verhalten gegenüber dem Kunden. Sowie die Ausarbeitung möglicher Kommunikationsinstrumente, um bestehende Kunden besser zu binden und neue Kunden leichter zu gewinnen. Der Fokus soll hierbei auf einer Corporate Identity für Einzelunternehmer liegen.}},
author = {{Sommer, Maike}},
pages = {{106}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Corporate Identity für einen Hochzeitsfotografen}}},
year = {{2016}},
}
@book{882,
abstract = {{Die Studierenden des Bachelorstudiengangs Medienproduktion an der Hochschule Ostwestfalen-Lippe haben sich im Sommersemester 2015 unter anderem deshalb gezielt mit der mobilen Berichterstattung im Hörfunk, dem Bereich WebDoku oder auch dem Phänomen des Printmagazins Landlust beschäftigt. Dabei haben Sie im Semesterverlauf neben Fachvorträgen und selbst entwickelten Workshops erste eigene wissenschaftliche Artikel verfasst, von denen eine Auswahl Eingang in diesen Seminarband gefunden hat. Sie spiegeln sowohl unterschiedliche Erfahrungen der Studierenden als auch unterschiedliche Herangehensweisen an die bearbeiteten Themen wider. Gleichzeitig sind sie eine Momentaufnahme in Zeiten der ständig voranschreitenden Medienkonvergenz.}},
author = {{Urfels, Ole Vincent and Werner, Lena and Wistinghausen, Carolin and Nehrkorn, Katharina Zoe and Rutkowski, Lutz and Böker, Hannah Cathrin}},
editor = {{Lechtenberg, Frank}},
isbn = {{978-3-7418-5001-1}},
pages = {{212}},
publisher = {{ epubli }},
title = {{{Perspektiven im Journalismus Ein Seminarband des Kurses Journalismus 2 im Sommersemester 2015 an der Hochschule Ostwestfalen-Lippe}}},
year = {{2016}},
}
@misc{883,
abstract = {{Diese Arbeit soll die Themen der Erstellung und Verbreitung von Audio- und Videomaterial im Internet behandeln, verschiedene Zugangsmethoden erläutern und Portale erklären die dazu genutzt werden können. Ebenfalls werden auf rechtliche Sachverhalte hingewiesen, die bei der Erstellung und Verbreitung von Audio- und Videomaterial entstehen.}},
author = {{Kynast, Jörn}},
keywords = {{Podcast, Internet, Youtube, Livestreaming, Audiodatei, Portal , Verbreitungsrecht, Video}},
pages = {{113}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Möglichkeiten nutzergenerierte Audio- und Videoproduktionen zu erstellen und im Internet zu verbreiten}}},
year = {{2016}},
}
@misc{885,
abstract = {{In der folgenden Ausarbeitung wird die Entwicklung des Produktkataloges für eine Möbelmanufaktur erklärt. Der Katalog umfasst das weiterlaufende Sortiment der Firma und ist für Händler und Architekten angefertigt worden. In der Ausarbeitung wird genauer auf das entstandene Regelwerk für den Katalog eingegangen und sich mit den Themen wie Raster und Typografie auseinandergesetzt. }},
author = {{Schake, Anabelle}},
keywords = {{Katalog, CI, Raster, Möbelindustrie}},
pages = {{70}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption und Produktion eines Produktkataloges - Erweiterung eines bestehenden Corporate Designs}}},
year = {{2016}},
}
@misc{887,
author = {{Werthschulte, Carolin}},
pages = {{77}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Das stumme Zeichen - Die Rolle und Wirkung von Requisiten in Theater-, Film- und Serienproduktionen}}},
year = {{2016}},
}
@misc{889,
author = {{Schäfer, Angela}},
pages = {{70}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Erstellung eines Corporate Designs anhand von zwei verschiedenen Restaurants}}},
year = {{2016}},
}
@misc{891,
author = {{Todtenhaupt, Christian}},
pages = {{58}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Massiver Papierverbrauch - Ein globales Problem mit verheerenden Auswirkungen f\"ur Umwelt und Menschen.}}},
year = {{2016}},
}
@misc{893,
author = {{Ottensmann, Marc Philip}},
pages = {{99}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Game-Engines get real with Unreal \& Co.}}},
year = {{2016}},
}
@misc{895,
author = {{Nehrkorn, Katharina Zoe}},
pages = {{174}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Formula Student International : Medienkampagne für eine internationale Rennserie}}},
year = {{2016}},
}
@misc{897,
author = {{Kaupmann, Patrick}},
pages = {{66}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Wie funktioniert Werbung? : Analyse der Werbewirkung unter neurowissenschaftlichen Gesichts- punkten sowie die Ableitung der daraus resultierenden Erkenntnisse f\"ur die Konzeption von Werbung.}}},
year = {{2016}},
}
@misc{899,
author = {{Habrock, Marius}},
pages = {{68}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Ein Kleines Stück Heimat : Sieben Blickwinkel auf die Stadt Herford ; Editorial Design: Konzeption, Gestaltung und Realisation eines Buches über die Thematik „Heimat in Herford“}}},
year = {{2016}},
}
@misc{901,
abstract = {{Entwicklung eines Corporate Design für die Design-Werkstatt "punkt punkt & punkt" mit einem Exkurs zum Thema "Logo von ebay".}},
author = {{Piora, Rebecca}},
pages = {{103}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{punkt punkt & punkt : Konzeption, Gestaltung und Realisation eines Corporate Design ür die Design-Werkstatt "punkt punkt & punkt"}}},
year = {{2016}},
}
@misc{9022,
author = {{Glahn , Oliver }},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Instationäre Raumluftströmung zur Komfortoptimierung - Simulationsstudie zur Bewertung der durch Deckenventilatoren erzeugten Raumluftströmung}}},
year = {{2016}},
}
@misc{9023,
author = {{Jauch , Benjamin }},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Umbau eines historischen Ackerbürgerhauses in Nieheim zur Schaffung eines Integrationszentrums für Flüchtlinge}}},
year = {{2016}},
}
@misc{9024,
author = {{Kornmeyer , Martin}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Energetische Sanierung eines historischen Ackerbürgerhauses unter Berücksichtigung der thermisch-hygrischen Verhältnisse der Bausubstanz}}},
year = {{2016}},
}
@misc{9025,
author = {{Müßgens, Milan }},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Schallabsorption eines Plattenwerkstoffes aus Fichtenrinde}}},
year = {{2016}},
}
@misc{9026,
author = {{Noureddin , Abbas}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Hypokausten - Systeme im Passivhauskonzept}}},
year = {{2016}},
}
@misc{9027,
author = {{Schwarz, Viktoria}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Wettbewerbskriterien eines AktivPlus Museums}}},
year = {{2016}},
}
@misc{903,
author = {{Stepan, Björn}},
pages = {{152}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Film-Look - Analyse entscheidender Parameter im Bewegtbild Design}}},
year = {{2016}},
}
@misc{906,
author = {{Keßler, Christian}},
pages = {{34}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Die Entwicklung von Natur-Dokumentationen im Angelbereich mit Hilfe von Youtube}}},
year = {{2016}},
}
@misc{9065,
author = {{Porta, Lluis Garcés }},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Passive House design in a spanish climate}}},
year = {{2016}},
}
@misc{908,
author = {{Mergel, Katharina}},
pages = {{75}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Fashionfilm - Die Einordnung einer neuen Marketingstrategie mit Betrachtung ihrer Zukunftsfähigkeit}}},
year = {{2016}},
}
@misc{910,
author = {{Hasemann, Dominik}},
pages = {{54}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Potenzial und Entwicklung einer App für ein landesweites Sportbildungswerk : Analyse | Konzeption | Umsetzung}}},
year = {{2016}},
}
@misc{9117,
author = {{Cartier, Pierre and Graupner, Sylvia}},
isbn = {{978-3-945059-31-9}},
pages = {{144}},
publisher = {{e-enterprise}},
title = {{{Ein Land, von dem man außer dem Namen nichts weiß: Grothendieck und „Motive“}}},
volume = {{6}},
year = {{2016}},
}
@misc{9119,
author = {{Manin, Jurij I.}},
isbn = {{978-3-945059-21-0}},
pages = {{291}},
publisher = {{e-enterprise}},
title = {{{Mathematik als Metapher}}},
volume = {{1}},
year = {{2016}},
}
@misc{912,
author = {{Oechsner, Anna-Maria}},
pages = {{102}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Creating intriguing Onboarding Experiences}}},
year = {{2016}},
}
@misc{914,
author = {{Jäger, Adrian}},
pages = {{39}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Feuer im Neptun - Ein Audiogame}}},
year = {{2016}},
}
@misc{921,
author = {{Masoud, Andre}},
pages = {{53}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Realität und Inszenierung im Dokumentarfilm}}},
year = {{2016}},
}
@book{946,
abstract = {{Die Studierenden des Bachelorstudiengangs Medienproduktion an der Hochschule Ostwestfalen-Lippe haben sich im Wintersemester 2015/16 gezielt mit der mobilen Berichterstattung im Hörfunk, dem Bereich WebDoku oder auch dem Phänomen des Printmagazins Landlust beschäftigt. Dabei haben Sie im Semesterverlauf neben Fachvorträgen und selbst entwickelten Workshops erste eigene wissenschaftliche Artikel verfasst, von denen eine Auswahl Eingang in diesen Seminarband gefunden hat. Sie spiegeln sowohl unterschiedliche Erfahrungen der Studierenden als auch unterschiedliche Herangehensweisen an die bearbeiteten Themen wider. Gleichzeitig sind sie eine Momentaufnahme in Zeiten der ständig voranschreitenden Medienkonvergenz. }},
author = {{Führer, Melina and Nehrkorn, Katharina Zoe and Rutkowski, Lutz and Wistinghausen, Carolin and Werner, Lena and Urfels, Ole Vincent and Werthschulte, Carolin}},
editor = {{Lechtenberg, Frank}},
isbn = {{978-3-7418-6027-0 }},
keywords = {{Landlust, Journalismus, Journalisten, Reportage, Bildmanipulation, Online, Fernsehreportage, Krisenberichterstattung}},
pages = {{212}},
publisher = {{epubli, Selbstverlag des Vereins Medienwerk e.V.}},
title = {{{Perspektiven im Journalismus Ein Seminarband des Kurses Journalismus 2 im Sommersemester 2015 an der Hochschule Ostwestfalen-Lippe}}},
year = {{2016}},
}
@misc{950,
abstract = {{Diese Masterarbeit befasst sich mit der Thematik des Renderings in MAXON Cinema 4D und der These, dass die neu entwickelte Rendersoftware NVIDIA® Iray® für den Anwender und für mittelständische Unternehmen effizienter ist als die schon integrierte physikalische Standard-Rendersoftware. Die Methoden und wichtigsten Parameter werden immer mit Bezug auf Iray® erläutert, sodass die Aussage der Anfangsthese im Fazit begründet oder widerlegt werden kann.}},
author = {{Düchting, Andre}},
keywords = {{Rendering, NVIDIA, Iray, BRDF, BSDF, MDL, GI, AO, Shading, Lighting, Bidirektionale Reflektanzverteilungsfunktion, GI, Iray, Lichtregie, Music Description Language, NVIDIA Corporation (Santa Clara, Calif.), Rendering}},
pages = {{100}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{RENDERING mit Bezug auf NVIDIA® Iray® in Cinema 4D}}},
year = {{2016}},
}
@misc{952,
author = {{Rosanna Saurin, Vita}},
keywords = {{Stereoskopischer Film, Virtuelle Realität}},
pages = {{30}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Potenzial von Virtual Reality. Der neue Standard oder nur ein Hype?}}},
year = {{2016}},
}
@misc{954,
author = {{Janko, Ulrike}},
keywords = {{Design Manual, Logo, Ulrike Janko, Corporate Identity, Entwicklung, Naturheilkunde, Planung, Realisierung, Werbekonzeption}},
pages = {{105}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption, Gestaltung und Realisation eines Corporate Designs für die Naturheilkundepraxis von Corrina Koch in Kassel}}},
year = {{2016}},
}
@misc{957,
author = {{Krips, Nadine}},
keywords = {{Marketingstrategie, Online-Marketing, Virtuelle Realität}},
pages = {{36}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Vergleich von Virtual Reality mit ähnlicher Unterhaltungselektronik anhand der Analyse dazugehöriger Marketingstrategien : Untersuchung auf Ähnlichkeiten und Gründe gegebener Misserfolge}}},
year = {{2016}},
}
@misc{959,
author = {{Pepperl, Stephanie}},
keywords = {{Facebook, Planung, Realisierung, Soziales Netzwerk, Vermarktung}},
pages = {{90}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Planung und Realisierung einer Social Media Fanpage : am Beispiel einer regionalen Werbe- und Veranstaltungsplattform}}},
year = {{2016}},
}
@misc{961,
author = {{Urfels, Ole}},
keywords = {{Deutschland. Bundesregierung, Social Media, United Nations}},
pages = {{78}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Social Media Strategie von Bundesregierung und UN - Analyse und Vergleich}}},
year = {{2016}},
}
@misc{963,
author = {{Reetz, Dennis}},
keywords = {{Corporate Design Manual, Software as a Service, Webentwicklung, Cloud Computing, Corporate Design, Digitalisierung}},
pages = {{97}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption einer Webanwendung als Software as a Service-Dienst f\"ur die Erstellung, Verwaltung und Bereitstellung von Gestaltungsrichtlinien}}},
year = {{2016}},
}
@misc{965,
abstract = {{Pocket Guide zum Thema Grundlagen Grafikdesign}},
author = {{Ellerbrok, Daniela}},
keywords = {{Design, Gebrauchsgrafik, Kommunikationsdesign, Visualisierung}},
pages = {{98}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Grundlagen Grafikdesign}}},
year = {{2016}},
}
@misc{967,
author = {{Akulenko, Kateryna}},
keywords = {{Bildband, Bildpublizistik, Fotografie}},
pages = {{76}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Rolle des Bildbandes im Fotojournalismus}}},
year = {{2016}},
}
@inproceedings{273,
abstract = {{This paper introduces an efficient modular solution kit for intralogistic drives, which reduces the total energy consumption of all drives in an automated warehouse by more than 15%. The reduction of energy consumption results from the interaction of optimized components (motors, control techniques and regeneration units), which are described in detail in this paper. Different motor concepts like the induction motor, the synchronous reluctance motor and the permanent magnet synchronous machine are compared according to the special requirements for intralogistics applications. Different control techniques are presented in order to achieve sensorless and efficient-optimal operation of these motors. The sensorless control technique uses signal injection to detect the rotor position sufficiently exact also in case of speed near standstill. Efficient-optimal operation is achieved by reducing the motor current with regard to the torque (MTPA-control). Furthermore this paper introduces a regeneration unit that can be connected between the DC link of frequency inverters and the mains to feed back regenerative energy. The regeneration unit consisting of a buck converter, a synchronous inverter and a line-filter can work in parallel to commonly used uncontrolled rectifiers. Its functioning is shown with the help of measurement results of a 1kW laboratory prototype. The last section shows a demonstrator in which a conventional conveyer system (with induction motor and braking resistor) is compared with an optimized one using the presented components. Power versus time measurements show specific energy savings resulting from the interaction of the optimized components.}},
author = {{Austermann, Johann and Borcherding, Holger and Stichweh, H. and Grabs, Volker}},
booktitle = {{2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe)}},
isbn = {{978-3-8007-4186-1}},
keywords = {{electric current control, induction motors, invertors, permanent magnet motors, reluctance motors, sensorless machine control, torque control, modular solution kit, intralogistic drives, automated warehouse, energy consumption reduction, optimized components interaction, induction motor, synchronous reluctance motor, permanent magnet synchronous machine, sensorless control technique, signal injection, rotor position, motor current, MTPA-control, regeneration unit, DC link, frequency inverters, buck converter, synchronous inverter, line-filter, Induction motors, Reluctance motors, Permanent magnet motors, Rotors, Torque, Inverters, intralogistics, reluctance motor, sensorless control, regeneration unit, braking energy}},
location = {{Karlsruhe}},
pages = {{1639--1646}},
publisher = {{VDE Verlag}},
title = {{{High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications}}},
doi = {{10.1109/EPE.2016.7695687}},
year = {{2016}},
}
@inproceedings{2928,
author = {{Materna, Daniel}},
location = {{Braunschweig}},
title = {{{Efficient nonlinear reanalysis for structural modifications}}},
year = {{2016}},
}
@misc{2991,
author = {{Beshay, U. and Feldt, Sebastian and Schwarze, B. and Wefing, P. and Hahne, T. and Moschinski, J. and Müller, C. and Büker, R. and Kramer, M. and Brod, H. and Frahm, Björn}},
location = {{Recklinghausen, Germany}},
title = {{{DMA Photobioreactor System – Cultivation at low shear stress and optional membrane aeration}}},
year = {{2016}},
}
@misc{2992,
author = {{Hernández Rodriguez, Tanja and Vörtler, S. and Kern, S. and Platas Barradas, O. and Pörtner, R. and Frahm, Björn}},
location = {{Recklinghausen, Germany}},
title = {{{A software tool for biopharmaceutical seed train design and optimization}}},
year = {{2016}},
}
@misc{2993,
author = {{Koopmann, K. S. and Hernández Rodriguez, Tanja and Vörtler, S. and Beshay, U. and Möller, J. and Pörtner, R. and Frahm, Björn}},
location = {{Koblenz, Germany}},
title = {{{Simulation of cell culture seed trains – investigation of the influence of parameter inaccuracies}}},
year = {{2016}},
}
@techreport{3017,
abstract = {{Studienbrief}},
author = {{Noosten, Dirk}},
publisher = {{Deutsche Akademie für Management}},
title = {{{Immobilienfinanzierung}}},
year = {{2016}},
}
@inproceedings{3086,
author = {{Austermann-Haun, Ute and Alt, K. and Voigt, A. and Koppmann, M. and Firk, J. and Nahrstedt, A.}},
location = {{Düsseldorf}},
title = {{{Einsatz von Ozonung in Kombination mit granulierter Aktivkohle auf den Kläranlagen Detmold und Paderborn}}},
year = {{2016}},
}
@article{3092,
author = {{Meier, J. F. and Austermann-Haun, Ute and Alt, K. and Kuhlmann, S.}},
journal = {{KA Korrespondenz Abwasser Abfall}},
number = {{1}},
pages = {{28 -- 36}},
title = {{{Pilotprojekt zur Mikroschadstoffelimination mittels Ozonung auf der ZKA Detmold}}},
volume = {{63}},
year = {{2016}},
}
@inproceedings{3183,
author = {{Austermann-Haun, Ute}},
location = {{Soltau}},
title = {{{Kläranlagen – Orte besonderer Korrosionsgefährdung}}},
year = {{2016}},
}
@inproceedings{3185,
author = {{Austermann-Haun, Ute}},
location = {{Düsseldorf}},
title = {{{Einsatz von Ozonung in Kombination mit granulierter Aktivkohle auf den Kläranlagen Detmold und Paderborn}}},
year = {{2016}},
}
@inproceedings{3186,
author = {{Austermann-Haun, Ute}},
location = {{Detmold-Blomberg}},
title = {{{Energy neutral wastewater treatment plant Bad Oeynhausen}}},
year = {{2016}},
}
@inproceedings{3187,
author = {{Austermann-Haun, Ute}},
location = {{Detmold-Blomberg}},
title = {{{Elimination of micro-pollutants in municipal wastewater treatment plants}}},
year = {{2016}},
}
@inproceedings{3188,
author = {{Austermann-Haun, Ute}},
location = {{LWL- Freilichtmuseum Detmold}},
title = {{{Toilette – Freud und Leid}}},
year = {{2016}},
}
@inproceedings{3189,
author = {{Austermann-Haun, Ute}},
location = {{Hannover, Congress Centrum}},
title = {{{Abwasser aus der Pektin- und Erfrischungsgetränkeindustrie}}},
year = {{2016}},
}
@inproceedings{327,
author = {{Austermann, Johann and Borcherding, Holger and Mallwitz, R.}},
location = {{Freiburg}},
title = {{{Einsatz eines SiC - MOSFETs in einem Energierückspeisungsmodul für Frequenzumrichter}}},
year = {{2016}},
}
@misc{332,
abstract = {{The invention relates to a circuit and to a method for operating an electrical machine (M) connected to at least three phases (L1, L2, L3) of a power supply network by means of a frequency converter (1) that has a DC link (3), wherein, by means of a synchronous inverter (7) that is actuated by a DC chopper (6) and comprises two bridge halves switching the positive and the negative half-waves respectively, the energy generated by said machine (M) is fed back into the power supply network. According to the invention, the synchronous inverter (7) has an asymmetrical design such that, to switch the potential tapped from the DC link (3) by the DC chopper (6), switching is carried out by a first bridge half (8) that consists of thyristors (S1, S3, S5) as electronic switches, and such that the second bridge half (9) comprises reverse-blocking electronic switches (S2, S4, S6) able to be switched off.}},
author = {{Austermann, Johann and Borcherding, Holger}},
pages = {{6}},
title = {{{Circuit and Method for Multiphase Operation of an Electrical Machine}}},
year = {{2016}},
}
@proceedings{333,
abstract = {{The annual International Conference on Production Engineering and Management takes place for the sixth time his year, and can therefore be considered a well - established event that is the result of the joint effort of the OWL University of Applied Sciences and the University of Trieste. The conference has been established as an annual meeting under the Double Degree Master Program ‘Production Engineering and Management’ by the two partner universities.
The main goal of the conference is to provide an opportunity for students, researchers and professionals from Germany, Italy and abroad, to meet and exchange information, discuss experiences, specific practices and technical solutions used in planning, design and management of production and service systems. In addition, the conference is a platform aimed at presenting research projects, introducing young academics to the tradition of
Symposiums and promoting the exchange of ideas between the industry and the academy. Especially the contributions of successful graduates of the Double Degree Master Program ‘Production Engineering and Management’ and those of other postgraduate researchers from several European countries have been enforced.
This year’s special focus is on Direct Digital Manufacturing in the context of Industry 4.0, a topic of great interest for the global industry. The concept is spreading, but the actual solutions must be presented in order to highlight
the practical benefits to industry and customers. Indeed, as Henning Banthien, Secretary General of the German
‘Plattform Industrie 4.0’ project office, has recently remarked, “Industry 4.0 requires a close alliance amongst the private sector, academia, politics and trade unions” in order to be “translated into practice and be implemented now”.
PEM 2016 takes place between September 29 and 30, 2016 at the OWL University of Applied Sciences in Lemgo. The program is defined by the Organizing and Scientific Committees and clustered into scientific sessions
covering topics of main interest and importance to the participants of the conference. The scientific sessions deal
with technical and engineering issues, as well as management topics, and include contributions by researchers from academia and industry. The extended abstracts and full papers of the contributions underwent a double -
blind review process. The 24 accepted presentations are assigned, according to their subject, to one of the following sessions: ‘Direct Digital Manufacturing in the Context of Industry 4.0’, ‘Industrial Engineering and Lean Management’, ‘Management Techniques and Methodologies’, ‘Wood Processing Technologies and Furniture Production’ and ‘Innovation Techniques and Methodologies.}},
editor = {{Villmer, Franz-Josef and Padoano, Elio}},
isbn = {{978-3-946856-00-9}},
location = {{Lemgo}},
number = {{1}},
pages = {{304}},
title = {{{Production Engineering and Management}}},
year = {{2016}},
}
@article{3331,
author = {{Kutz, Gerd and Kamke, Dominic}},
issn = {{2191-8341}},
journal = {{TechnoPharm : making science work}},
number = {{5}},
pages = {{290--294}},
publisher = {{ECV}},
title = {{{ Innovativer Ansatz zur Prozesskontrolle bei der Granulation im Intensivmischergranulator (Teil 2)}}},
volume = {{6}},
year = {{2016}},
}
@article{3332,
author = {{Kutz, Gerd and Kamke, Dominic}},
issn = {{2191-8341}},
journal = {{TechnoPharm : making science work }},
number = {{4}},
pages = {{234--239}},
publisher = {{ECV}},
title = {{{Innovativer Ansatz zur Prozesskontrolle bei der Granulation im Intensivmischergranulator (Teil 1)}}},
volume = {{6}},
year = {{2016}},
}
@inproceedings{3333,
author = {{Kutz, Gerd}},
location = {{Köln}},
publisher = {{TÜV Rheinland LGA Products GmbH}},
title = {{{Anforderungen an die aseptische Herstellung}}},
year = {{2016}},
}
@inproceedings{3341,
author = {{Kutz, Gerd}},
location = {{Köln}},
publisher = {{TÜV Rheinland LGA Products GmbH}},
title = {{{Sterilfiltration}}},
year = {{2016}},
}
@inproceedings{3395,
author = {{Kutz, Gerd}},
location = {{Köln}},
publisher = {{TÜV Rheinland LGA Products GmbH}},
title = {{{Filterintegritätstests }}},
year = {{2016}},
}
@inproceedings{3396,
author = {{Kutz, Gerd}},
location = {{TÜV Rheinland LGA Products GmbH in Köln.}},
title = {{{Sterilisations- und Desinfektionsverfahren}}},
year = {{2016}},
}
@inproceedings{3397,
author = {{Kutz, Gerd}},
location = {{TÜV Rheinland LGA Products GmbH in Köln}},
title = {{{Media Fill - Prozesssimulation mit Nährmedien}}},
year = {{2016}},
}
@inproceedings{3416,
author = {{Kutz, Gerd}},
location = {{Bonn}},
title = {{{Messmethoden (sichtbare Partikel), Methoden des Ph. Eur}}},
year = {{2016}},
}
@inproceedings{3417,
author = {{Kutz, Gerd}},
location = {{Tübingen}},
title = {{{Qualifizierung, Kalibrierung, Reinigungsvalidierung, Prozessparameter, Prozessvalidierung}}},
year = {{2016}},
}
@article{3418,
author = {{Kutz, Gerd and Kamke, Dominic}},
issn = {{1434-8942 }},
journal = {{ Pharma + Food : Effizienz im Hygieneprozess : Ausrüstung, Produktion, Organisation}},
number = {{4}},
pages = {{36--38}},
publisher = {{Hüthig}},
title = {{{Dem Intensivmischer auf der Spur: Echtzeit- Prozesskontrolle}}},
year = {{2016}},
}
@article{3492,
author = {{Könneker, Martin and Jungkind, Wilfried}},
issn = {{1434-1980}},
journal = {{Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse}},
number = {{3}},
pages = {{78 -- 81}},
publisher = {{GIZO-Verlag}},
title = {{{Systematisches und nachhaltiges Betriebsmittelmanagement / Management of Manufacturing Resources - Systematic and Sustainable}}},
volume = {{32}},
year = {{2016}},
}
@article{3493,
author = {{Jungkind, Wilfried and Helmrich, Ingo}},
issn = {{0947-0085}},
journal = {{ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb}},
number = {{111 / 3}},
pages = {{139 -- 142}},
publisher = {{Hanser}},
title = {{{Montagegerechte Produktgestaltung im Produktentwicklungsprozess}}},
volume = {{2016}},
year = {{2016}},
}
@inbook{3555,
author = {{Bochning, Stefan and Riedl, Ulrich}},
booktitle = {{Teaching X change (Innovative Lehrideen und -formate an der Hochschule Ostwestfalen-Lippe)}},
editor = {{Ternes, Doris and To, Kieu-Anh and Eller-Studzinsky, Bettina}},
pages = {{79 -- 87}},
title = {{{Das „Synthese-Modul 3 Umwelt und Freiraum“ (9122) im Bachelor-Studiengang Landschaftsarchitektur}}},
volume = {{1}},
year = {{2016}},
}
@article{3556,
author = {{Lohr, Mathias and Riedl, Ulrich}},
issn = {{2190-7234}},
journal = {{ Auenmagazin : Magazin des Auenzentrums Neuburg a.d. Donau }},
number = {{10}},
pages = {{38 -- 42}},
publisher = {{Auenzentrum}},
title = {{{Durch Insekten Auen besser verstehen – Schaukästen (Dioramen) für das NaturForum Bislicher Insel}}},
year = {{2016}},
}
@article{3558,
author = {{Herber, Katrin and Riedl, Ulrich}},
journal = {{Auenmagazin (Magazin des Auenzentrums Neuburg a.d.Donau)}},
number = {{09}},
pages = {{29}},
title = {{{Jahrestagung des Bildungsnetzwerks Aue an der Hochschule Ostwestfalen-Lippe (OWL) in Höxter}}},
year = {{2016}},
}
@book{3762,
abstract = {{Das vorliegende Buch vermittelt die Grundlagen zur Berechnung von Kälteanlagen und Wärmepumpen. Hierzu zählen
- die Bemessung von Kühllasten,
- die Auswahl von Verfahren und Kältemitteln und
- die Berechnung der erforderlichen Komponenten.
Zusammenhänge werden verständlich hergeleitet und anhand eingehender Praxisbeispiele erörtert. Die Gliederung des Buches folgt einer klaren didaktischen Linie. Aus dem Abkühlverhalten verschiedener Stoffe wird auf Kälteverfahren unterschiedlicher Komplexität und schließlich auf das Thema Wärmeübertragung übergeleitet. Der Schwierigkeitsgrad der basierenden thermodynamischen Konzepte wird dabei stufenweise gesteigert. Das Buch eignet sich daher auch zum Selbststudium.}},
author = {{Dohmann, Joachim}},
isbn = {{978-3-662-49109-6}},
keywords = {{Kühllast, Atmungswärme, Phasenumwandlung, Kaltgasprozess, Stirling, Kaltdampfprozess, Kälteanlagen, Kaskadenschaltung, Wärmepumpen, Verdampfer, Verflüssiger, Kältekompressor, Kälteträger, Wärmeübertrager, Wärmequellen, Kältetransport, Kälte, Dimensionierung von Anlagen, Projektierung von Anlagen, Spezifizierung von Apparaten}},
pages = {{264}},
publisher = {{Springer Vieweg}},
title = {{{ Thermodynamik der Kälteanlagen und Wärmepumpen : Grundlagen und Anwendungen der Kältetechnik}}},
doi = {{10.1007/978-3-662-49110-2}},
year = {{2016}},
}
@misc{3778,
author = {{Diedrich, Martin and Heintschel, S. and Hausberg, M. and Mück, J. and Bauer, T. and Berger, J. and Dorsch, H. and Zürcher, A. and Nerlich, K. and Riedl, Ulrich and Fiebig, I. and Lohr, M.}},
pages = {{328}},
publisher = {{BfN-Skripte}},
title = {{{Biomassekulturen der Zukunft aus Naturschutzsicht}}},
volume = {{442}},
year = {{2016}},
}
@article{3781,
author = {{Dekomien, Kerstin and Huxol, Andrea and Riegel, Adrian}},
issn = {{0018-3881}},
journal = {{Holztechnologie}},
number = {{3}},
pages = {{28 -- 34}},
publisher = {{Institut für Holztechnologie}},
title = {{{Sensorische und messtechnische Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen}}},
volume = {{56}},
year = {{2016}},
}
@inproceedings{5535,
author = {{Zapp, Jürgen and Pfender, S. and Schneider, Jan}},
booktitle = {{GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016}},
location = {{Lemgo}},
title = {{{Stabilität eines Melatonin-haltigen funktionellen Getränkes}}},
year = {{2016}},
}
@inproceedings{5536,
author = {{Kothe, Achim and Krieger, O. and Seidel, Leopold and Nolte, Timo and Zapp, Jürgen}},
booktitle = {{GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016}},
location = {{Lemgo}},
title = {{{Antioxidantien in Tee - HPLC-Screening mittels Nachsäulenderivatisierung}}},
year = {{2016}},
}
@inproceedings{5537,
author = {{Seidel, Leopold and Kothe, Achim and Zapp, Jürgen}},
booktitle = {{GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016}},
location = {{Lemgo}},
title = {{{Triterpene in der Apfelschale von alten und neuen Apfelsorten}}},
year = {{2016}},
}
@inproceedings{5538,
author = {{Danneel, Hans-Jürgen}},
booktitle = {{GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016}},
location = {{Lemgo}},
title = {{{Fünf Jahre ILT.NRW}}},
year = {{2016}},
}
@inproceedings{5540,
author = {{Tachil, Jörg and van Bracht, Hendrik and Danneel, Hans-Jürgen}},
booktitle = {{GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016}},
location = {{Lemgo}},
title = {{{Prozesschromatographische Fraktionierung von Proteinhydrolysaten}}},
year = {{2016}},
}
@misc{5541,
author = {{Reichl, Norbert and Brunklaus, Sabine and Danneel, Hans-Jürgen and Müller, Ulrich and Gebauer, Simone and Kolkmann, Beate and Höfel, Sabine}},
booktitle = {{GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016}},
editor = {{Buckenhüskes, Herbert J.}},
location = {{Lemgo}},
publisher = {{Gesellschaft Deutscher Lebensmitteltechnologen}},
title = {{{Lebensmittel 4.0 - Chancen für den Mittelstand? Ergebnisse einer Unternehmensbefragung. Welche Chancen und Potentiale birgt das Thema Digitalisierung? Wir befragten - Unternehmen antworteten}}},
year = {{2016}},
}
@inproceedings{5544,
author = {{Schneider, Jan}},
booktitle = {{TWA der VLB Berlin e. V., Berlin, 24.10.2016}},
location = {{Berlin}},
title = {{{Smart Food Technology – eine neue Partnerschaftinitiative von Hochschule und Industrie: welches Potenzial hat die Digitalisierung?}}},
year = {{2016}},
}
@inproceedings{5545,
author = {{Hoffarth, Marc and Broeker, Timo and Wolff, V. and Mengedoth, C. and Heikrodt, Klaus and Schneider, Jan}},
booktitle = {{2. Fachforum Biologische Methanisierung, Regensburg, 25.10.2016}},
location = {{Regensburg}},
title = {{{ Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation}}},
year = {{2016}},
}
@inproceedings{5546,
author = {{Schneider, Jan}},
booktitle = {{Forum Brau Beviale, Nürnberg, 10.11.2016}},
location = {{Nürnberg}},
title = {{{Hochschule Ostwestfalen-Lippe: vom Bachelor über den Master zur Promotion am Graduiertenzentrum OWL}}},
year = {{2016}},
}
@inproceedings{5547,
author = {{Schwarzer, Knut and Wilhelm, Patrick and Schneider, Jan and Müller, Ulrich}},
booktitle = {{Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016}},
isbn = {{978-0-8169-1097-7}},
location = {{San Francisco}},
publisher = {{Wiley-VCH GmbH}},
title = {{{The Lemgo D- and z-value database for food – An instrument for the dimensioning of pasteurization process}}},
year = {{2016}},
}
@inproceedings{5548,
author = {{Müller, Ulrich and Wilhelm, Patrick}},
booktitle = {{Annual Meeting des American Institute of Chemical Engineers (AIChE), Vortrag, San Francisco, 13.-18.11.2016}},
location = {{San Francisco}},
title = {{{Mechanical steam treatment of plant material}}},
year = {{2016}},
}
@inproceedings{5549,
author = {{Pliske, Roland and Müller, Ulrich and Kohlus, R.}},
booktitle = {{Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016}},
location = {{San Francisco}},
title = {{{A comparison of the static and dynamic freeze-drying by means of modelling}}},
year = {{2016}},
}
@inproceedings{5550,
author = {{Rossmann, Sören and Schneider, Jan and Müller, Ulrich and Kohlus, R.}},
booktitle = {{Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016}},
location = {{San Francisco}},
title = {{{Direct homogenization of beverage emulsions with the innovative counterflow injection process}}},
year = {{2016}},
}
@inproceedings{5551,
author = {{Huchtmann, Julian and Aufzug, M. and Schneider, Jan}},
booktitle = {{DLG-Forum FoodTec, Frankfurt-Rodgau, 23.11.2016}},
location = {{Frankfurt-Rodgau}},
title = {{{Entwicklung eines funktionellen Getränks zur Linderung des Hangover „Glory Mornin“}}},
year = {{2016}},
}
@inproceedings{5552,
author = {{Broeker, Timo and Blöhse, D. and Bittner, J. and Hoffarth, Marc and Ramke, Hans-Günter and Heikrodt, Klaus and Schneider, Jan}},
booktitle = {{NRW-Biokraftstofftagung - Haus Düsse - Landwirtschaftskammer NRW, Bad Sassendorf, 24.11.2016}},
location = {{Bad Sassendorf}},
title = {{{Biokatalytische Methanisierung im Pilotmaßstab }}},
year = {{2016}},
}
@inproceedings{5553,
author = {{Schneider, Jan}},
booktitle = {{Lebensmittel 4.0, Vortrag, Lemgo, 12.12.2016}},
location = {{Lemgo}},
title = {{{Potenziale von Industrie 4.0 in der Qualitätssteuerung}}},
year = {{2016}},
}
@article{5554,
author = {{Pliske, Roland and Haase, M. and Müller, Ulrich and Kohlus, R.}},
issn = {{0009-286X }},
journal = {{Chemie-Ingenieur-Technik }},
number = {{8}},
pages = {{1169--1176}},
publisher = {{Wiley-VCH}},
title = {{{Prozesscharakterisierung der dynamischen Gefriertrocknung in einem Feststoffmischer }}},
volume = {{88}},
year = {{2016}},
}
@inproceedings{5680,
author = {{Minge, Michael and Wagner, Ingmar and Thüring, Manfred}},
location = {{New York}},
pages = {{2056--2060}},
publisher = {{Sage Publications}},
title = {{{Developing and Validating and English version of the meCUE questionnaire for Measuring User Experience}}},
year = {{2016}},
}
@inproceedings{5681,
author = {{Trauzettel, Franziska and Minge, Michael}},
pages = {{583--586}},
title = {{{Usability in the lifecycle of medical software development}}},
year = {{2016}},
}
@inproceedings{5682,
author = {{Minge, Michael and Thüring, Manfred and Wagner, Ingmar and Kuhr, Carina V.}},
editor = {{Soares, Marcelo M. and Falcão, Christianne and Ahram, Tareq Z.}},
pages = {{115--128}},
publisher = {{Springer International Press}},
title = {{{The meCUE Questionnaire. A Modular Evaluation Tool for Measuring User Experience}}},
year = {{2016}},
}
@article{5744,
author = {{Cardinali, Marcel}},
issn = {{2566-8900}},
journal = {{urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung}},
number = {{1}},
pages = {{24--26}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe}},
title = {{{Integrationsprozesse brauchen geeignete Räume. Handlungsempfehlungen für Flüchtlingsunterkünfte}}},
year = {{2016}},
}
@inbook{5761,
author = {{Greve, Klaus and Häusler, Axel}},
booktitle = {{Flächensparen - Ökosystemleistungen - Handlungsstrategien}},
editor = {{Meinel, Gotthard }},
isbn = {{978-3-944101-69-9}},
pages = {{59--66}},
publisher = {{Rhombos-Verlag }},
title = {{{Entwicklung und Einsatz von ISI - ein GIS-Webdienst zur ressourcenschonenden Flächenplanung}}},
volume = {{69}},
year = {{2016}},
}
@inproceedings{5768,
author = {{Häusler, Axel}},
booktitle = {{glasstec 2016: „Düsseldorf ist die Metropole moderner Glas-Architektur“}},
location = {{Düsseldorf}},
title = {{{GeoDesign}}},
year = {{2016}},
}
@techreport{5795,
author = {{Thurk, I. and Guhr, Nadine and Breitner, M.H.}},
title = {{{Unterstützung des Wissensmanagements mit Electronic Learning – Eine Literaturanalyse}}},
volume = {{#79}},
year = {{2016}},
}
@inbook{5801,
author = {{Heinze, I. and Guhr, Nadine and Breitner, M.H.}},
booktitle = {{Cruise Business Development – Safety, Product Design and Human Capital}},
editor = {{Papathanassis, A}},
pages = {{157--174}},
publisher = {{Springer International Publishing Switzerland}},
title = {{{Cruise Customer Loyalty Improvement with Social Media}}},
year = {{2016}},
}
@inproceedings{5810,
abstract = {{In offices and most other working environments a high speech privacy and a low noise level is desired to allow for concentrated work and calm work conditions. Hence a low Speech Transmission Index (STI) is required, as even irrelevant speech information at lower volumes can be extremly disturbing and performance reducing. At the same time working environments demand for other - often conflicting - requirements such as transparency to ensure visual connections and daylight transmission, functional flexibility for diverse activities in the same space and for hygienic, environmental or security aspects. These requirements have to be balanced by a sensible and intelligent design and layout of absorbers and partition elements and partition. Three research projects investigated an optimised design of low and mid frequency absorbers for working environments to improve the acoustic and design quality of different products. Acoustically optimised indoor spaces may become more important in the future due to an increase of hearing impairments in the aging population as well as in the younger generations. This is seen not only as a technical but as a design challenge to balance optimised sound pressure levels, reverberation times and Speech Transmission Indices. © 2016, German Acoustical Society (DEGA). All rights reserved.}},
author = {{Kirch, Chirstoph and Pottgiesser, Uta}},
booktitle = {{Proceedings of the Inter-Noise 2016}},
editor = {{Kropp, W.}},
keywords = {{Additional requirements, Building types, Room acoustics}},
location = {{Hamburg}},
publisher = {{Deutsche Gesellschaft für Akustik e.V.}},
title = {{{Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use}}},
year = {{2016}},
}
@inproceedings{584,
abstract = {{Due to the continuing trend towards more complexity of products with an increasing number of variants and smaller lot sizes, the assembly often takes place -despite relatively high labor costs in Western industrialized nations -manually or partially automated. An outsourcing or relocation of assembly function abroad is not suitable in most cases.Therefore, it is increasingly important to reduce process variations and waste in manual assembly processes. Assistance systems have the potential, depending on the situation, to assist the worker in his work, to reduce error rate and to increase productivity. In a first part of the paper an overview will be given to different types of assembly assistance systems. Then a morphological chart is developed, which can provide assistance in selecting or comparing assembly assistance systems. With the help of this chart an assembly assistant system is presented. Finally a quick look is taken at further research being done in this area.}},
author = {{Hinrichsen, Sven and Riediger, Daniel and Unrau, Alexander}},
booktitle = {{Production Engineering and Management}},
editor = {{Villmer, Franz-Josef and Padoano, Elio}},
isbn = {{978-3-946856-00-9}},
keywords = {{Assistance systems, Manual assembly, Morphology}},
location = {{Lemgo}},
number = {{01}},
pages = {{3--14}},
title = {{{Assistance Systems in Manual Assembly}}},
year = {{2016}},
}
@inproceedings{5853,
abstract = {{This paper provides information about an in-house research project for shadow box design. During this research project, several mockups with sensors for heat and relative humidity were produced and tested under two different laboratory conditions: one with artificial sunlight and one in an outdoor temperate climate.
The outdoor test provided information about temperature changes in the shadow box due to air infiltration and exfiltration. Further, it also provided information about the conservation of solar energy in the air cavity behind the spandrel glass and adjacent materials. Temperature sensors on the interior surfaces of the façade produced data that was used to draw conclusions about the heat flow from inside the shadow box to the interior ambient air via the façade profiles. It was also used to develop a two-dimensional simulation tool to show heat development and heat flow in the shadow box.
The test under laboratory conditions with artificial sunlight showed that the correct choice of glass type and color of the opaque back layer highly influences heat development in the shadow box cavity. The test results also illustrate that the size of ventilation openings and the depth of the air layer only slightly influence heat built-up in this cavity.
The shadow box is a very complex system that should be designed and manufactured so as not to have a detrimental effect on the thermal performance of the facade. To maintain precise and consistent reproduction and to improve the thermal performance, a new PVC shadow box profile was developed. PVC is a poor thermal conductor and, therefore, the heat flow from the shadow box construction into the interior becomes interrupted, consequently improving the heat transfer coefficients of the façade and the panel construction. Furthermore, the PVC profile has been designed as a four sided mitered and sealed frame insert to enable easy attachment of the opaque back layer, thus creating a weather tight assembly within the curtain wall day light opening. }},
author = {{Arztmann, Daniel}},
booktitle = {{Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings}},
editor = {{Noble, Douglas and Kensek, Karen and Das, Shreya }},
isbn = {{978-1-882352-43-2 }},
keywords = {{Curtain wall, energy efficiency, thermal break, condensation, physical testing, mockups}},
location = {{Los Angeles}},
publisher = {{Tectonic Press}},
title = {{{Shadow Boxes – Re-Engineered}}},
volume = {{2}},
year = {{2016}},
}
@inproceedings{586,
abstract = {{Under the circumstance of advanced globalization, it is increasingly difficult for production companies to remain competitiveness. Many of them are forced to restrict budget and reduce production costs. In addition, the customization of product increases continuously. This results in extension of product variation and reduction of product life cycle. Therefore, the companies need a high flexibility to respond quickly to changes in the market and to customer requirements. Lean thinking, as a powerful tool, has been implemented by many companies in production and manufacturing. In order to avoid waste in lean manufacturing, it is necessary to manage efficiently the material flow. In this study, for a lean material handling system in the lean manufacturing of a company, an in-plant milk-run distribution system is taken into consideration. The system consistsof vehicles, which move periodically in certain routes. The materials are delivered in short intervals from a central storage area to several points of use in the production. By using milk-run in plant, the material handling processes can be standardized and therefore the waste can be eliminated. One additional aim of the study with milk-run distribution for the material provision is to minimize the handling time, which determines directly the personal costs. In order to realize the aim, the work has beendivided into several steps. At first, the production processes, especially the material provision for the production have been analyzed. Secondly, the technological solutions have been analyzed in order to handle different loading units required by different machines in the production. Thirdly, the milk-run distribution for lean production is formulated as an optimization problem with the object of minimizing the number of vehicles and the distance traveled under the constraints of specific time periods, capacity of vehicle and related stations etc. Fourthly, two optimization methods are developed in order to find the optimal solution for the milk-run problem and the performance of different methods is also compared.}},
author = {{Li, Li and Schulze, L.}},
editor = {{Villmer, Franz-Josef and Padoano, Elio}},
isbn = {{978-3-946856-00-9}},
keywords = {{Milk-Run, Material provision, Lean production, Genetic algorithm}},
location = {{Lemgo}},
number = {{1}},
pages = {{65--76}},
title = {{{In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production}}},
year = {{2016}},
}
@inproceedings{5869,
author = {{Arztmann, Daniel}},
booktitle = {{Facade Tectonics World Congress 2016, Façade Tectonics Institutes, Los Angeles, USA, 10.10.2016}},
location = {{Los Angeles}},
title = {{{Shadow Boxes – Re-engineered : Vortrag}}},
year = {{2016}},
}
@inproceedings{587,
abstract = {{Development engineers are most valued for their excellence in physical product development, but on the flipside, project managers face problems when trying to fit them into effectively running development processes. Because of the advantages of Lean Management in production (Lean Production), process managers often try to transfer lean principles directly to development processes, not considering that major differences exist between well-described production processes and new product development processes which include much more uncertainty and risk. Nevertheless, several lean principals are applicable in product development. This paper describes five lean development insights (LDIs) which were found when optimizing an entire product realization process. Lean principles have been examined and then translated to collaboration between product development and tool manufacturing at a globally operating German family-run company. These LDIs are meant to help project and process managers, consultants and developers to rethink their ways of organizing product development. The application of these insights will result in increased transparency, intensified collaboration, improved processes and quality, shortened lead times, and also eliminate waste.}},
author = {{Riediger, M. and Villmer, Franz-Josef}},
booktitle = {{Production Engineering and Management}},
editor = {{Villmer, Franz-Josef and Padoano, Elio}},
isbn = {{978-3-946856-00-9}},
keywords = {{Lean development, Collaboration, Agile, PLM, Frontloading, Simultaneous engineering}},
location = {{Lemgo}},
number = {{1}},
pages = {{111--122}},
title = {{{Five Insights in Effectively Managing Product Development}}},
year = {{2016}},
}
@inproceedings{5875,
author = {{Häusler, Axel}},
location = {{Bad Meinberg}},
title = {{{Kann man aus Daten Städte bauen?}}},
year = {{2016}},
}
@inbook{5878,
author = {{Escrihuela-Branz, Michael and Minge, Michael and Rötzscher, Antje}},
booktitle = {{Leitlinien verkehrspsychologischer Interventionen. Beratung, Förderung und Wiederherstellung der Fahreignung}},
editor = {{Brieler, Paul and Kollbach, Birgit and Kranich, Udo and Reschke, Konrad}},
pages = {{206--209}},
publisher = {{Kirschbaum Verlag GmbH}},
title = {{{Analyse der Konsumentwicklung}}},
year = {{2016}},
}
@inbook{5879,
author = {{Minge, Michael and Rötzscher, Antje}},
booktitle = {{Leitlinien verkehrspsychologischer Interventionen. Beratung, Förderung und Wiederherstellung der Fahreignung}},
editor = {{Brieler, Paul and Kollbach, Birgit and Kranich, Udo and Reschke, Konrad}},
pages = {{210--212}},
publisher = {{Kirschbaum Verlag GmbH}},
title = {{{Bedingungsanalyse Alkohol- und Drogenauffälligkeiten}}},
year = {{2016}},
}
@inbook{5880,
author = {{Minge, Michael and Rötzscher, Antje}},
booktitle = {{Leitlinien verkehrspsychologischer Interventionen. Beratung, Förderung und Wiederherstellung der Fahreignung}},
editor = {{Brieler, Paul and Kollbach, Birigt and Kranich, Udo and Reschke, Konrad}},
pages = {{212--217}},
publisher = {{Kirschbaum Verlag GmbH}},
title = {{{Bedingungsanalyse Straf- und Verkehrsauffälligkeiten}}},
year = {{2016}},
}
@inproceedings{5890,
author = {{Häusler, Axel}},
booktitle = {{Stadt der Zukunft : digital}},
location = {{Detmold}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe}},
title = {{{Die Zukunft der Stadt – digital}}},
volume = {{8}},
year = {{2016}},
}
@inproceedings{590,
abstract = {{Against the background of rising overhead costs in manufacturing companies the application of methods of overhead cost management is of increasing importance. Within this article existing approaches of cost management are explained in principle. Based on these approaches a new complementary approach of managing costs with the help of costs elasticity ratios is described by a case study. The method is based on the hypothesis that there are no fixed personnel costs, but personnel costs with different elasticity with respect to the volume of orders. Personnel costs elasticity (ε) is derived from the quotient of the relative change in personnel costs (k) and the relative change of the order volume (q) of a billing month (i). The method aims to increase the flexibility of overhead costs, but can also be applied with respect to so-called direct costs. In this case, the question arises as to what extent the direct costs actually develop proportional elastic over time.}},
author = {{Hinrichsen, Sven}},
booktitle = {{Production Engineering and Management}},
editor = {{Villmer, Franz-Josef and Padoano, Elio}},
isbn = {{978-3-946856-00-9}},
keywords = {{Cost management, Overhead costs, Direct costs, Labor costs, Elasticity}},
location = {{Lemgo}},
number = {{1}},
pages = {{123--131}},
title = {{{How Elasticity Indicators Support Cost Management}}},
year = {{2016}},
}
@book{5901,
author = {{Sachs, Hans and Graf, Markus}},
publisher = {{Selbstverlag}},
title = {{{ New Babylon : Shared Towers}}},
year = {{2016}},
}
@inproceedings{593,
abstract = {{Due to the increased individualization of customer demands in the last 20 years, the production systems are required to be more flexible and scalable. It is the samefor the material flow system with automated guided vehicles (AGVs). To realize the flexibility and scalability, it is recommended to decentralized control the vehicles. As an attempt, a concept of swarm intelligence with Radio Frequency Identification (RFID) is proposed and introduced in this article. The concept is supposed to be used for automated guided vehicle systems in which objects have to be transported from place to place. Therefore the object has to be self-organized and has to manage its own transport. In this context the vehicles have to choose the most optimal transportation. Swarm intelligence is a topic which deserves a high level of attention as a method to realize high flexibility and scalability.}},
author = {{Cantauw, Alisa Maria and Li, Li}},
booktitle = {{Department of Production Engineering and Management}},
editor = {{Villmer, Franz-Josef and Padoano, Elio}},
isbn = {{978-3-946856-00-9}},
keywords = {{Swarm intelligence, Automated guided vehicle system, RFID, Internet of things, Multi-agent system}},
location = {{Lemgo}},
number = {{1}},
pages = {{133--143}},
title = {{{Application of Swarm Intelligence for Automated Guided Vehicle Systems}}},
year = {{2016}},
}
@inproceedings{594,
abstract = {{Due to steadily increased demand for customized products, as well as their enhanced complexity and shorter product lifecycles, companies in all industries require a reliable prediction of the expected product development costs from the very start of product realization. Incorrectly estimated project costs may lead to serious consequences in the course of a development project. For example, offers are most often based on such early cost estimations and consequently, a major safety margin has to be added, which may result in the refusal of an order. A too low estimation of the costs of aproduct development project, on the other hand, may result in a loss for the project.In this paper, a software tool is presented for the prediction of product development costs which offers the user the ability to create a more accurate prediction of project costs on the basis of a minimum of retrograde project information. By combining a parametric cost model and cost result with stochastic character, based on the Monte Carlo method, in one software system, it is possible to significantly improve projectcost estimations.}},
author = {{Otte, Andreas and Scheideler, Eva and Villmer, Franz-Josef}},
booktitle = {{Department of Production Engineering and Management}},
editor = {{Villmer, Franz-Josef and Padoano, Elio}},
isbn = {{978-3-946856-00-9}},
keywords = {{Cost prediction, Product realization projects, Monte Carlo method, Parametric cost model, Software tool}},
location = {{Lemgo}},
number = {{1}},
pages = {{281--292}},
title = {{{Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage}}},
year = {{2016}},
}
@book{5942,
editor = {{Nether, Ulrich}},
isbn = {{978-3-88778-508-6}},
pages = {{207}},
publisher = {{Spurbuchverlag }},
title = {{{Perception of space in architecture and culture: adhocratic spaces : international summer school at Istanbul Technical University : 14.07.2014-27.07.2014}}},
year = {{2016}},
}
@inbook{5946,
author = {{Nether, Ulrich}},
booktitle = {{Perception of Space in Architecture and Culture - Study of Adhoratic Spaces}},
editor = {{Nether, Ulrich}},
isbn = {{978-3-88778-508-6}},
pages = {{31--45}},
publisher = {{Spurbuchverlag}},
title = {{{Making the Invisible Visible}}},
year = {{2016}},
}
@inproceedings{5985,
author = {{Ayon, A. and Pottgiesser, Uta}},
booktitle = {{Proceedings of the Facade Tectonic World Congress 2016. (Book of Abstracts)}},
location = {{Los Angeles}},
title = {{{Reglazing Modernism : The American and European Experience with Steel Frame Assemblies to Date}}},
year = {{2016}},
}
@inproceedings{5986,
author = {{Pottgiesser, Uta and Kirch, C.}},
booktitle = {{Proceedings of PLEA2016. Passive and Low Energy Architecture (Book of Abstracts)}},
location = {{Los Angeles}},
title = {{{Acoustic Optimisation by Office and Facade Design: Case Studies based on Experiments and Simulations}}},
year = {{2016}},
}
@inproceedings{5987,
author = {{Pottgiesser, Uta and Ashour, Anan}},
booktitle = {{Proceedings of SBE 16 - International Conference on Sustainable Built Environment (Book of Abstracts)}},
location = {{Hamburg}},
title = {{{Emerging Envelopes: Design Education for adaptive and sustainable Facades}}},
year = {{2016}},
}
@inproceedings{6181,
author = {{Rossmann, S. and Schneider, Jan and Müller, Ulrich and Kohlus, R.}},
location = {{Lemgo}},
title = {{{Einfluss verschiedener Forciermethoden auf die Stabilität und den Trübungsverlust von 20 Getränkeemulsionen}}},
year = {{2016}},
}
@article{6252,
author = {{Song, Jian and Schinow, Vitali and Bünting, Karolin}},
journal = {{WOMag}},
title = {{{Korrelation zwischen Verschleißeigenschaften und kontaktelektrischen Eigenschaften von silberbeschichteten Steckverbindern}}},
volume = {{1-2}},
year = {{2016}},
}
@article{6255,
author = {{Yuan, Haomiao and Song, Jian and Schinow, Vitali}},
journal = {{International Journal of Fracture Fatigue and Wear}},
pages = {{158 -- 165}},
title = {{{Fretting Wear and Fretting Corrosion of Electrical Contacts, International Journal of Fracture Fatigue and Wear}}},
volume = {{4}},
year = {{2016}},
}
@inproceedings{6309,
author = {{Yuan, Haomiao and Song, Jian and Schinow, Vitali}},
booktitle = {{Proceedings of 12th Arnold Tross Colloquium}},
location = {{Hamburg}},
title = {{{The influence of silver coating thickness involving surface roughness on the linear wear rate}}},
year = {{2016}},
}
@inproceedings{6332,
author = {{Yuan, Haomiao and Song, Jian and Schinow, Vitali}},
booktitle = {{Proceedings of the 62nd IEEE Holm Conference on Electrical Contacts}},
location = {{Clearwater Beach, FL, USA}},
title = {{{Fretting corrosion of tin coated electrical contacts: the influence of normal force, coating thickness and geometry of sample configuration}}},
year = {{2016}},
}
@inproceedings{6334,
author = {{Yuan, Haomiao and Song, Jian and Schinow, Vitali}},
booktitle = {{Proceedings of the 28th International Conference on Electric Contacts (ICEC2016)}},
location = {{Edinburgh}},
pages = {{93 -- 98}},
title = {{{The Influence of Roughness on the Wear and Fretting Behavior of Silver Coated Electrical Contacts}}},
year = {{2016}},
}
@inproceedings{6335,
author = {{Yuan, Haomiao and Song, Jian and Koch, Christian and Silbernagel, Eugen and Schinow, Vitali}},
booktitle = {{Proceedings of XXX International Conference on Surface Modification Technologies (SMT30)}},
location = {{Milan}},
title = {{{Tribological Properties and Fretting Performance of Gold, Silver and Tin Coatings}}},
year = {{2016}},
}
@inproceedings{6336,
author = {{Song, Jian and Schinow, Vitali and Yuan, Haomiao and Koch, Christian}},
booktitle = {{Proceedings of Tribologie-Fachtagung 2016}},
location = {{Göttingen}},
title = {{{Kontaktanordnung und Lebensdauer von elektrischen Kontaktoberflächen}}},
year = {{2016}},
}
@misc{10064,
author = {{Kluge, Thomas and Liehr, Stefan and Bischofberger, Jenny and Deffner, Jutta and Felmeden, Jörg and Kramm, Johanna and Krug von Nidda, Alexia and Schulz, Oliver and Stibitz, Vanessa and Woltersdorf, Laura and Zimmermann, Martin}},
pages = {{118}},
publisher = {{Institut für Sozial-Ökologische Forschung (ISOE) }},
title = {{{IWRM-Verbundprojekt CuveWaters: Integriertes Wasserressourcen-Management im zentralen Norden Namibias (Cuvelai Basin) und in der SADC-Region: Phase III: Transfer eines Multi-Ressourcen-Mix, TP 1: Schlussbericht: Projektlaufzeit: 01.10.2013-31.12.2015}}},
doi = {{ https://doi.org/10.2314/GBV:884350460 }},
year = {{2016}},
}
@inbook{10066,
abstract = {{Namibia is the most arid country in Sub-Saharan Africa. The Cuvelai-Etosha Basin (CEB) in central northern Namibia in particular is experiencing various ecological and social-ecological challenges such as high climate variability, saline groundwater, dependence on Angola for freshwater supply, high population growth and density, and increasing urbanisation. These challenges make water supply and management difficult and threaten the livelihood of the local population and the health of the ecosystem. Facing up to these challenges, the German-Namibian research project CuveWaters has developed, adapted and set up different technologies as pilot plant s. The Integrated Water Resources Management (IWRM) concept of CuveWaters is based on a multi-resource-mix in which water is obtained from different sources (rainwater, floodwater, groundwater and wastewater) and used for various purposes. High quality water is used as drinking water; water of a relatively low quality is used for irrigation. In cooperation with the residents of four villages and one small town, the project partners are implementing different technologies to collect and store, produce, treat and reuse water. The implemented technologies are rain- and floodwater harvesting, groundwater desalination, and the combination of sanitation, wastewater treatment and water reuse. The aim is to improve peoples’ livelihood through research on innovative and adapted solutions which contribute to a successful and adapted application of IWRM. To this end, the project integrates science, technology and societal aspects in a transdisciplinary research approach by linking scientific knowledge from natural, engineering and social sciences with the everyday practices and know-how of the stakeholders involved. Thus, the technical aspects are complemented by a wide range of societal and scientific components, such as capacity development, monitoring, participation or knowledge management. These ensure societal embedding of the technologies and knowledge transfer. This paper will illustrate the transdisciplinary approach, implemented technologies and accompanying measures as well as key results.}},
author = {{Lier, Stephan and Brenda, Maria and Cornel, Peter and Deffner, Juta and Felmeden, Jörg and Jokisch, Alexander and Kluge, Thomas and Müller, Katherina and Röhrig, Julian and Stibitz, Vanessa and Urban, Wilhelm}},
booktitle = {{Integrated Water Resources Management: Concept, Research and Implementation}},
editor = {{Borchardt, Dietrich}},
isbn = {{978-3-319-79729-8}},
keywords = {{Multi-resource-mix, Rainwater and floodwater harvesting, Solar-coupled groundwater desalination, Sanitation and water reuse, Transdisciplinarity}},
pages = {{683–717}},
publisher = {{Springer }},
title = {{{From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia}}},
doi = {{https://doi.org/10.1007/978-3-319-25071-7_26}},
year = {{2016}},
}
@inbook{10069,
author = {{Winker, Martina and Felmeden, Jörg}},
booktitle = {{Intelligente und multifunktionelle Infrastruktursysteme für eine zukunftsfähige Wasserversorgung und Abwasserentsorgung. Ergebnisse aus den INIS-Projekten}},
pages = {{16–17}},
publisher = {{[Deutsches Institut für Urbanistik gGmbH] }},
title = {{{netWORKS 3 - Potenzialabschätzung und Umsetzung wasserwirtschaftlicher Systemlösungen auf Quartiersebene in Frankfurt am Main und Hamburg}}},
year = {{2016}},
}
@misc{10075,
author = {{Winker, Martina and Trapp, Jan and Felmeden, Jörg and Libbe, Jens and Schramm, Engelbert}},
booktitle = {{Transforming Cities}},
issn = {{2366-7281}},
number = {{4}},
pages = {{49–53}},
publisher = {{Trialog Publishers Verlagsgesellschaft}},
title = {{{Transformation der Wasserinfrastruktur organisieren - Was ist dabei zu beachten?}}},
year = {{2016}},
}
@misc{10086,
author = {{Felmeden, Jörg and Libbe, Jens and Michel, Bernhard and Schramm, Engelbert and Winker, Martina}},
booktitle = {{ Planerin : Mitgliederfachzeitschrift für Stadt-, Regional- und Landesplanung}},
issn = {{0936-9465 }},
number = {{6}},
pages = {{9–11}},
publisher = {{SRL }},
title = {{{Integrierte Infrastrukturbetrachtung. Zur Umsetzung neuartiger Wasserinfrastrukturen}}},
year = {{2016}},
}
@misc{10087,
abstract = {{Während es in den Vorgängerprojekten eher um die Erarbeitung von Konzepten und um strategische Überlegungen ging, orientiert sich das dritte Projekt des Forschungsverbundes an konkreten Quartieren und den Möglichkeiten der Umsetzung. In der Ausgangsbestimmung zu diesem Vorhaben konstatiert netWORKS, dass sich die neuen Lösungen trotz ihrer prinzipiell größeren Flexibilität und ökologischen Vorteilen in der Fläche bislang nicht durchgesetzt haben, da für die Kommunen und Akteure der Siedlungswasserwirtschaft noch zu viele Fragen offen sind. Neue technische Lösungen verändern Stadt- und Haustechnik gleichermaßen. Welche Möglichkeiten gibt es beim Umbau hin zu einer nachhaltigen Wasserinfrastruktur? Wie wirken sich innovative Wasserinfrastruktursysteme auf den Alltag der Bewohner aus? Welche Strategien und neuen Geschäftsmodelle zeichnen sich für Kommunen sowie die Ver- und Entsorgungswirtschaft ab? Welche Kosten ergeben sich aus neuen Koordinationserfordernissen in der Ver- und Entsorgung? Wie kommen die Akteure vor Ort zu einer umfassenden Bewertung und Auswahl der passenden Maßnahme? Diesen Fragen widmet sich netWORKS 3. Die Veröffentlichung basiert auf den Ergebnissen der Forschungsarbeiten im Verbundvorhaben "Potenzialabschätzung und Umsetzung wasserwirtschaftlicher Systemlösungen auf Quartiersebene" in Frankfurt am Main und in Hamburg.}},
author = {{Felmeden, Jörg and Michel, Bernhard and Zimmermann, Martin}},
isbn = {{978-3-88118-587-5}},
keywords = {{Bewertung}},
pages = {{106}},
publisher = {{Deutsches Institut für Urbanistik gGmbH}},
title = {{{Integrierte Bewertung neuartiger Wasserinfrastruktursysteme. Vom städtischen Quartier über die Gesamtstadt bis zur regionalen Perspektive}}},
doi = {{10.13140/RG.2.2.30709.47844}},
volume = {{32}},
year = {{2016}},
}
@misc{10088,
author = {{Felmeden, Jörg and Michel, Bernhard and Zimmermann, Martin}},
booktitle = {{ KA : Korrespondenz Abwasser, Abfall ; Organ der DWA }},
issn = {{1866-0010}},
keywords = {{Bauwesen, Planung, Rohrsysteme}},
number = {{12}},
pages = {{1082–1090}},
publisher = {{GFA, Gesellschaft zur Förderung der Abwassertechnik }},
title = {{{Neuartige Wasserinfrastruktutren - Ergebnisse der integrierten Bewertung aus Modellgebietsebene (netWORKS 3)}}},
doi = {{10.3242/kae2016.12.005}},
volume = {{63}},
year = {{2016}},
}
@misc{10169,
abstract = {{The reduction of wires and connections is a fundamental necessity for upcoming industrial 4.0 solutions, requiring a large amount of reconfigurability and flexibility. Our research focuses on recent ways of combining energy and data transmission in single contactless transducers, enabling easy installation, maintenance and possible fulfilment of high protection classes. While this approach can typically be solved by combining Wifi and inductive energy transfer, the Wifi aspect is often limited by the available media access and channel occupation. Another issue is the real time capability of Wifi or other wireless transmission protocols like IEEE 802.15.4. While creating a new wireless or contactless standard is beyond the focus of this work, we concentrate on combining existing technologies and their interoperability. This includes powerline communication systems, near field data transmission and inductive energy transfer mechanisms.}},
author = {{Wesemann, Derk and Witte, Stefan and Schmelter, Andreas and Heß, Roland}},
booktitle = {{Communication in automation : 2016 IEEE World Conference on Factory Communication Systems (WFCS)$dMay 3-6, 2016, Aveiro, Portugal}},
isbn = {{ 978-1-5090-2339-4 }},
keywords = {{Automation, Industry 4.0, Contactless Data Transmission, Contactless Energy Transmission, Wireless Communication}},
location = {{Aveiro, Portugal}},
publisher = {{IEEE}},
title = {{{Flexible factory automation: Potentials of contactless transmission systems, combining state-of-the-art technologies}}},
doi = {{10.1109/WFCS.2016.7496533}},
year = {{2016}},
}
@proceedings{10635,
editor = {{Blustein, Jamie and Herder, Eelco and Rubart, Jessica and Ashman, Helen}},
isbn = {{978-1-4503-4247-6}},
location = {{Halifax, Canada}},
publisher = {{Association for Computing Machinery (ACM)}},
title = {{{Proceedings of the 27th ACM Conference on Hypertext and Social Media (HT'16)}}},
doi = {{10.1145/2914586}},
year = {{2016}},
}
@misc{10672,
author = {{Latos, Benedikt and Holtkötter, Christoph and Brinkjans, Jan and Mütze-Niewöhner, Susanne}},
booktitle = {{IAW Spectrum}},
issn = {{2193-7222}},
pages = {{8--9}},
publisher = {{Lehrstuhl und Inst. für Arbeitswiss. der RWTH Aachen }},
title = {{{Simulationsbasiertes Vorgehen zur Planung einer Montagelinie nach dem Prinzip One-Piece-Flow}}},
volume = {{12}},
year = {{2016}},
}
@phdthesis{11142,
abstract = {{This dissertation proposes and investigates an isochronous wireless network for industrial control applications with guaranteed latencies and jitter. Based on a requirements analysis of real industrial applications and the characterisation of the wireless channel, the solution approach is developed. It consists of a TDMA-based medium access control, a dynamic resource allocation and the provision of a global time base for the wired and the wireless network. Due to the global time base, the solution approach allows a seamless and synchronous integration into existing wired Real-time Ethernet systems.}},
author = {{Trsek, Henning}},
isbn = {{978-3-662-49157-7}},
issn = {{2522-8587}},
keywords = {{industrial wireless system, wireless real-time communication, deterministic medium access control, isochronous WLAN, industrial automation}},
publisher = {{Springer }},
title = {{{Isochronous Wireless Network for Real-time Communication in Industrial Automation}}},
doi = {{10.1007/978-3-662-49158-4}},
year = {{2016}},
}
@inproceedings{4782,
abstract = {{Die zunehmende Individualisierung von Produkten stellt neue Anforderun-
gen an Produktionsanlagen, wodurch deren Komplexit¨at steigt. Damit komplexe An-
lagen effizient bedient werden k¨onnen, vor allem im Fall eines Fehlers, sind neue Inter-
aktionskonzepte erforderlich. In dieser Arbeit wurde ein Konzept f¨ur die Sprachverar-
beitung entworfen und prototypisch implementiert. Zus¨atzlich zur Sprachverarbeitung
ist eine semantische Schicht notwendig um eine Steuerung ¨uber Sprache zu realisieren}},
author = {{Bunte, Andreas and Diedrich, Alexander and Niggemann, Oliver}},
booktitle = {{Tagungsband des Entwicklerforums "HMI – Komponenten Lösungen"}},
publisher = {{HMI}},
title = {{{Natürlichsprachliche Schnittstelle für Produktionssysteme}}},
year = {{2016}},
}
@inproceedings{4790,
author = {{Bunte, Andreas and Diedrich, Alexander and Niggemann, Oliver}},
booktitle = {{International Workshop on the Principles of Diagnosis (DX)}},
title = {{{Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems}}},
year = {{2016}},
}
@inproceedings{4791,
author = {{Bunte, Andreas and Diedrich, Alexander and Niggemann, Oliver}},
booktitle = {{21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)}},
title = {{{Integrating Semantics for Diagnosis of Manufacturing Systems}}},
year = {{2016}},
}
@inbook{4792,
author = {{Niggemann, Oliver and Biswas, Gautam and Khorasgani, Hamed and Volgmann, Sören and Bunte, Andreas}},
booktitle = {{Handbuch Industrie 4.0 Bd. 2}},
editor = {{Vogel-Hauser, Birgit and Bauernhansl, Thomas and ten Hompel, Michael}},
publisher = {{Springer Berlin Heidelberg}},
title = {{{Datenanalyse in der intelligenten Fabrik}}},
year = {{2016}},
}
@inproceedings{4853,
author = {{Dürkop, Lars and Jasperneite, Jürgen}},
booktitle = {{KommA 2016 – Jahreskolloquium Kommunikation in der Automation}},
title = {{{Übertragbarkeit des PlugPlay-Prinzips aus der Informationstechnik auf die Automatisierungstechnik}}},
year = {{2016}},
}
@inproceedings{4854,
abstract = {{In this paper an investigation of the State of the Art of Industrial Wireless Sensor Networks (IWSNs) is performed. Therefore the given industrial requirements, different wireless communication protocols, the defined basic architecture and open research questions will be analysed. Furthermore, current challenges from the research domain will be discussed and a real use case of IWSNs from a research project in cooperation with a local industrial partner will be evaluated. To conclude this paper an outlook of further developments and possible future applications of IWSNs will be sketched.}},
author = {{Ehrlich, Marco and Wisniewski, Lukasz and Jasperneite, Jürgen}},
location = {{Lemgo}},
pages = {{28--39}},
title = {{{State of the Art and Future Applications of Industrial Wireless Sensor Networks}}},
year = {{2016}},
}
@inproceedings{4859,
author = {{Elattar, Mohammad and Wendt, Verena and Jasperneite, Jürgen}},
publisher = {{Springer}},
title = {{{Communications for Cyber-Physical Systems}}},
year = {{2016}},
}
@inproceedings{4862,
author = {{Jasperneite, Jürgen}},
booktitle = {{Vortrag Schlossrunde der Gesellschaft für Wirtschaftsförderung im Kreis Höxter mbH, der Industrie- und Handelskammer Ostwestfalen zu Bielefeld, und der Hochschule OWL}},
title = {{{Digital in NRW: Wie kommt Industrie 4.0 in den Mittelstand?}}},
year = {{2016}},
}
@inproceedings{4863,
author = {{Jasperneite, Jürgen and Niggemann, Oliver}},
booktitle = {{Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik}},
title = {{{Wie intelligent werden Maschinen?}}},
year = {{2016}},
}
@inproceedings{4865,
author = {{Henneke, Dominik and Freudenmann, Christian and Kammerstetter, Markus and Rua, David and Wisniewski, Lukasz and Jasperneite, Jürgen}},
booktitle = {{21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016)}},
title = {{{Communications for AnyPLACE: A Smart Metering Platform with Management and Control Functionalities}}},
year = {{2016}},
}
@inproceedings{4867,
author = {{Elattar, Mohammad and Wendt, Verena and Neumann, Arne and Jasperneite, Jürgen}},
booktitle = {{21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016)}},
publisher = {{Berlin}},
title = {{{Potential of Multipath Communications to Improve Communications Reliability for Internet-based Cyber-physical Systems}}},
year = {{2016}},
}
@inproceedings{4868,
author = {{Flatt, Holger and Schriegel, Sebastian and Trsek, Henning and Adamczyk, Heiko and Jasperneite, Jürgen}},
booktitle = {{21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016)}},
title = {{{Analysis of the Cyber-Security of Industry 4.0 Technologies based on RAMI 4.0 and Identification of Requirements}}},
year = {{2016}},
}
@inproceedings{4869,
abstract = {{Jede Steigerung der Digitalisierung, Informationstransparenz und Standardisierung macht Produktionsanlagen angreifbarer. In diesem Beitrag wird am Beispiel einer Cloud-basierten Produktionsüberwachung das Vorgehensmodell einer Cybersicherheitsanalyse anhand des Referenzarchitekturmodells Industrie-4.0 (RAMI 4.0) und der Richtlinie VDI/VDE 2182 gezeigt. Das Vorgehen hilft dabei, den Bedarf an Schutzmaßnahmen für spezifische Applikationen zu identifizieren und ermöglicht die risikobasierte Auswahl von Gegenmaßnahmen zur Absicherung.}},
author = {{Flatt, Holger and Schriegel, Sebastian and Trsek, Henning and Adamczyk, Heiko and Jasperneite, Jürgen}},
booktitle = {{atp edition}},
title = {{{Industrie 4.0 IT-Sicherheit}}},
year = {{2016}},
}
@misc{4873,
author = {{Grotepass, Jürgen and Jasperneite, Jürgen and Steffens, Ernst-Joachim and Schmidt, Fabian and Anderl, Reiner and Bauer, Klaus and Diegner, Bernhard and Diemer, Johannes and Fay, Alexander and Fritz, Jessica and Göricke, Dietmar and Hilger, Claus and Kalhoff, Johannes and Kubach, Uwe and Löwen, Ulrich and Menges, Georg and Michels, Jan Stefan and Münch, Wolfram and Preiß, Helena and Reus, Olaf and Schmolze-Krahn, Raimund and Steffens, Ernst-Loachim and Stiedl, Thomas and ten Hompel, Michael and Zeidler, Christian}},
publisher = {{Bundesministerium für Wirtschaft und Energie}},
title = {{{Industrie 4.0 Aspekte der Forschungsroadmap in den Anwendungsszenarien}}},
doi = {{10.13140/RG.2.1.4440.2805}},
year = {{2016}},
}
@article{4878,
author = {{Jasperneite, Jürgen}},
journal = {{Kongress Industrie 4.0 der Südwestfälischen Industrie- und Handelskammer zu Hagen (eingeladener Vortrag)}},
title = {{{Industrie 4.0 – Lösungen für den Mittelstand aus dem Spitzencluster it’s OWL}}},
year = {{2016}},
}
@inproceedings{4879,
abstract = {{Die vollständige Digitalisierung der industriellen Produktion und die entstehende neue Qualität an Informationstransparenz sind die Grundlage für die Mehrwerte Effektivität, Qualität und Individualität. Diesem Mehrwertpotential stehen Gefahren der Cyber-Sicherheit entgegen: Jede Steigerung der Digitalisierung, Informationstransparenz und Standardisierung macht Produktionsanlagen angreifbarer. Das Referenz Architektur Model Industrie 4.0 (RAMI 4.0) ermöglicht die Abbildung aller Instanzen einer Industrie 4.0-Anwendung über den gesamten Lebenszyklus und kann so bei der Analyse der Cyber-Sicherheit von Industrie 4.0-Technologien unterstützen. In diesem Beitrag wird am Beispiel einer Cloud-basierten Produktionsüberwachung das Vorgehensmodel einer Cyber-Sicherheitsanalyse anhand RAMI 4.0 und der Richtlinie VDI/VDE 2182 gezeigt. Das Vorgehen unterstützt bei der Identifikation von Schutzbedarfen spezifischer Applikationen und ermöglicht die Risiko-basierte Auswahl von Gegenmaßnahmen zur Absicherung.}},
author = {{Flatt, Holger and Schriegel, Sebastian and Trsek, Henning and Jasperneite, Jürgen}},
booktitle = {{Automation 2016}},
title = {{{Analyse der Cyber-Sicherheit von Industrie 4.0-Technologien auf Basis des RAMI 4.0 und Identifikation von Lösungsbedarfen}}},
year = {{2016}},
}
@inproceedings{4881,
author = {{Henneke, Dominik and Wisniewski, Lukasz and Jasperneite, Jürgen}},
booktitle = {{12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal}},
title = {{{Analysis of Realizing a Future Industrial Network by Means of Software-Defined Networking (SDN)}}},
year = {{2016}},
}
@inproceedings{4883,
abstract = {{Scheduling of time triggered communication systems belongs to the well known hard mathematical optimization problems. This paper tackles the communication scheduling problem in redundant network topologies, where the real-time process data has to be duplicated and sent on two different paths to its destination. This paper proposes an algorithm that is able to find a feasible schedule in a short time, while keeping the makespan of the schedule in average 10% shorter than the makespan of the schedule produced by a commercial tool, which is the current benchmark.}},
author = {{Wisniewski, Lukasz and Wendt, Verena and Schumacher, Markus and Jasperneite, Jürgen and Diedrich, Christian}},
booktitle = {{12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal}},
title = {{{Scheduling of PROFINET IRT Communication in Redundant Network Topologies}}},
year = {{2016}},
}
@inproceedings{4885,
author = {{Jasperneite, Jürgen}},
booktitle = {{Stanford University (eingeladener Vortrag), Kalifornien, USA, März 2016}},
title = {{{Smart Manufacturing - Status and Open Issues}}},
year = {{2016}},
}
@inproceedings{4886,
author = {{Jasperneite, Jürgen}},
booktitle = {{Palo Alto Research Center (PARC, eingeladener Vortrag), Palo Alto, Kalifornien, USA, März 2016}},
title = {{{Intelligent Systems for the Factory of the Future}}},
year = {{2016}},
}
@inbook{4888,
author = {{Dürkop, Lars and Jasperneite, Jürgen}},
booktitle = {{Handbuch Industrie 4.0 Bd.2}},
isbn = {{9783662532478}},
pages = {{59--71}},
title = {{{„Plug & Produce“ als Anwendungsfall von Industrie 4.0}}},
doi = {{10.1007/978-3-662-53248-5_50}},
volume = {{2}},
year = {{2016}},
}
@book{4895,
author = {{Nerreter, Wolfgang and Flegel, Georg and Birnstiel, Karl and Borcherding, Holger and Meier, Uwe}},
isbn = {{978-3-446-44496-6}},
publisher = {{Carl Hanser Verlag}},
title = {{{Elektrotechnik für Maschinenbau und Mechatronik}}},
year = {{2016}},
}
@misc{4937,
author = {{Vetter, Andreas}},
publisher = {{Lippisches Landesmuseum}},
title = {{{Sonderausstellung : Tischchen - klein|raffiniert|funktional}}},
year = {{2016}},
}
@article{5053,
abstract = {{Treatment of wastewater from a tannery in Greater Ho Chi Minh City (Vietnam) was investigated on a pilot scale. After pre-treatment by the tannery that included batch-coagulation and sedimentation, the wastewater was treated by dissolved air flotation, a membrane bioreactor (MBR) and granular activated carbon (GAC) for polishing the MBR effluent. The average removal efficiency for organic substances in the MBR was 81% while total nitrogen could only be removed by 36%. The performance of the GAC column could be successfully predicted using adsorption parameters determined in laboratory experiments. A larger proportion of the organics in the MBR effluent was only weakly adsorbable, therefore the usable carbon capacity was limited as confirmed by the modelling approach. The results were used to outline the size of a technical plant with a volumetric loading rate of 3 kg COD/(m3*d) for the MBR and a specific carbon demand of about 1.8 kg/m3.}},
author = {{Fettig, Joachim and Pick, V. and Oldenburg, Martin and Phuoc, N. V.}},
issn = {{2220-1319}},
journal = {{Journal of Water Reuse and Desalination}},
number = {{4}},
pages = {{420--428}},
title = {{{Treatment of tannery wastewater for reuse by physico-chemical processes and a membrane bioreactor}}},
doi = {{10.2166/wrd.2016.036}},
volume = {{7}},
year = {{2016}},
}
@inproceedings{5084,
author = {{Minge, Michael and Herrlich, Marc and Lorenz, Katharina and Runge, Nina and Dannehl, Susanne}},
booktitle = {{Mensch und Computer 2016 – Workshopband}},
editor = {{Weyers, Benjamin and Dittmar, Anke}},
location = {{Aachen}},
title = {{{Motivationale Aspekte im Health Design: Gestaltung und Evaluation adhärenzfördernder therapeutischer Unterstützungssysteme}}},
doi = {{10.18420/MUC2016-WS02-0000}},
year = {{2016}},
}
@inproceedings{5085,
author = {{Minge, Michael and Lorenz, Katharina and Steffen, Wiebke and Gelgec, Özden}},
booktitle = {{Mensch und Computer 2016 – Workshopband}},
editor = {{Weyers, Benjamin and Dittmar, Anke}},
location = {{Aachen}},
title = {{{CreDeMo: Ein Tool zur Unterstützung der Ideenfindung bei der Gestaltung motivationsfördernder Technik}}},
doi = {{10.18420/MUC2016-WS02-0007}},
year = {{2016}},
}
@inproceedings{5086,
abstract = {{In diesem Beitrag werden Image Schemata genutzt, um die Grundlage für eine Tragezeitrückmeldung bei der Entwicklung einer Skoliose-App für Kinder und Jugendliche zu entwickeln. Es wurden Interviews geführt, aus denen die wichtigsten Image Schemata identifiziert werden konnten. Diese wurden durch eine zweite Erhebung empirisch überprüft und ergänzt. Anschließend wurden die verfügbaren Schemata um Aspekte der Farbwahrnehmung erweitert und durch Animationen visualisiert. Beide Sets, die Auswahl klassischer Image Schemata und diejenigen zur Farbwahrnehmung, wurden in einer dritten Erhebung verglichen und als Basis für die partizipative Gestaltung eingesetzt.}},
author = {{Seiboth, Diana and Minge, Michael and Dannehl, Susanne}},
booktitle = {{Mensch und Computer 2016 – Workshopband}},
editor = {{Weyers, Benjamin and Dittmar, Anke }},
location = {{Aachen}},
title = {{{Die App zum Korsett! Gestaltung der mobilen Applikation für die Skoliose-Therapie mit Image Schemata}}},
doi = {{10.18420/MUC2016-WS02-0009}},
year = {{2016}},
}
@inproceedings{5087,
author = {{Klamet, Josephin and Matthies, Denys J. C. and Minge, Michael}},
booktitle = {{Proceedings of the 3rd International Workshop on Sensor-based Activity Recognition and Interaction}},
isbn = {{9781450342452}},
title = {{{WeaRelaxAble}}},
doi = {{10.1145/2948963.2948965}},
year = {{2016}},
}
@article{5189,
abstract = {{ The service–profit chain (SPC) has served as a prominent guidepost for service managers and researchers alike. This meta-analysis provides the first comprehensive test of the SPC, showing that all the proposed links are statistically significant and substantial. However, the effect sizes vary considerably, partly according to the type of service provided. Meta-analytic structural equation models show that internal service quality translates into service performance through various mechanisms beyond employee satisfaction, and they highlight the importance of the service encounter and customer relationship characteristics for customer responses. The findings not only indicate the need to integrate complementary paths in the SPC framework but also challenge the implicit SPC rationale that firms should always maximize employee satisfaction and external service quality to optimize firm performance. }},
author = {{Hogreve, Jens and Iseke, Anja and Derfuss, Klaus and Eller, Tönnjes}},
issn = {{0022-2429}},
journal = {{Journal of Marketing}},
pages = {{41--61}},
title = {{{The Service–Profit Chain: A Meta-Analytic Test of a Comprehensive Theoretical Framework}}},
doi = {{10.1509/jm.15.0395}},
volume = {{Vol. 81 (3)}},
year = {{2016}},
}
@article{5190,
abstract = {{ In this article, we examine corporate architecture as an effective signal to knowledge workers in the recruiting process. Two types of corporate architecture that are common in the knowledge economy are distinguished: traditional functionalist and new functionalist architecture. New functionalist architecture combines a flat, transparent facade with semi-open office layouts including areas for social interaction. Holistically these functional elements signal and symbolize a non-bureaucratic, non-hierarchical organization. A conjoint analysis provides a first attempt to quantify how much students care for new functionalist architecture. Students’ stated preferences imply that they would forgo on average 10% of their starting salary in order to work in the new functionalist rather than the traditional functionalist workplace. The magnitude of this effect supports the view that architecture matters for job choice. Limitations of our study and directions for future research are discussed. }},
author = {{Radermacher, Katharina and Schneider, Martin R and Iseke, Anja and Tebbe, Tobias}},
issn = {{2397-0022}},
journal = {{German Journal of Human Resource Management: Zeitschrift für Personalforschung}},
pages = {{71--93}},
title = {{{Signalling to young knowledge workers through architecture? A conjoint analysis}}},
doi = {{10.1177/2397002216676038}},
volume = {{ Vol. 31 (1}},
year = {{2016}},
}
@article{5198,
author = {{Iseke, Anja}},
issn = {{0341-2687}},
journal = {{Schmalenbachs Zeitschrift für betriebswirtschaftliche Forschung}},
pages = {{186--211}},
title = {{{Humankapital und Sozialkapital: Gibt es einen Matthäus-Effekt bezüglich der Sozialkapitalbildung von Nachwuchsführungskräften?}}},
doi = {{10.1007/bf03372819}},
volume = {{Vol. 61 (3)}},
year = {{2016}},
}
@article{5205,
author = {{Moniz, Goncalo Canto and Quiroga, Carolina and Pottgiesser, Uta}},
isbn = {{978-989996450-1}},
journal = {{Proceedings of the 14th International Docomomo Conference - Adaptive Reuse: The Modern Movement Towards the Future}},
pages = {{830--832}},
title = {{{Education for reuse}}},
year = {{2016}},
}
@book{5206,
author = {{Knaack, Ulrich and Klein, Tillman and Bilow, Marcel and Pottgiesser, Uta and Böke, Jens and Ernst, Maximilian}},
isbn = {{978-94-6208-291-5 }},
pages = {{128}},
title = {{{Imagine 09 : prototyping efn mobile}}},
year = {{2016}},
}
@inproceedings{5207,
abstract = {{In offices and most other working environments a high speech privacy and a low noise level is desired to allow for concentrated work and calm work conditions. Hence a low Speech Transmission Index (STI) is required, as even irrelevant speech information at lower volumes can be extremly disturbing and performance reducing. At the same time working environments demand for other - often conflicting - requirements such as transparency to ensure visual connections and daylight transmission, functional flexibility for diverse activities in the same space and for hygienic, environmental or security aspects. These requirements have to be balanced by a sensible and intelligent design and layout of absorbers and partition elements and partition. Three research projects investigated an optimised design of low and mid frequency absorbers for working environments to improve the acoustic and design quality of different products. Acoustically optimised indoor spaces may become more important in the future due to an increase of hearing impairments in the aging population as well as in the younger generations. This is seen not only as a technical but as a design challenge to balance optimised sound pressure levels, reverberation times and Speech Transmission Indices. © 2016, German Acoustical Society (DEGA). All rights reserved.}},
author = {{Kirch, Chirstoph and Pottgiesser, Uta}},
booktitle = {{Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future}},
keywords = {{Additional requirements, Building types, Room acoustics}},
location = {{Hamburg}},
pages = {{3536--3547}},
publisher = {{German Acoustical Society (DEGA)}},
title = {{{Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use}}},
year = {{2016}},
}
@misc{5363,
abstract = {{Seit 2016 erscheint das urbanLab Magazin jährlich als Fachzeitschrift für Stadt- und Regionalplanung mit dem Anspruch Forschung, Lehre und der Praxis in den Planungsdisziplinen des Spannungsfeldes Stadt und Quartier anhand konkreter Themencluster besser zu vernetzen. Wir geben zukunftsweisenden Ideen, Fachbeiträgen, Publikationen und kontroversen Diskussionen eine Plattform und bringen sie unterstützt durch Erkenntnisse aus unserer Forschung auf den Punkt.}},
booktitle = {{Schrumpfen wir noch oder wachsen wir schon? }},
editor = {{Hall, Oliver and Cardinali, Marcel}},
issn = {{2566-8919}},
number = {{1}},
title = {{{urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung}}},
year = {{2016}},
}
@article{5398,
author = {{Dannehl, Susanne and Seiboth, Diana and Doria, Laura and Minge, Michael and Lorenz, Katharina and Thüring, Manfred and Kraft, Marc}},
journal = {{i-com, Journal of Interactive Media}},
pages = {{313--319}},
title = {{{A smartphone-based system to improve adherence in scoliosis therapy}}},
volume = {{15(3)}},
year = {{2016}},
}
@inproceedings{5519,
author = {{Rossmann, Sören and Merck, C. and Schneider, Jan and Müller, Ulrich and Kohlus, R.}},
booktitle = {{ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik (Poster), Erlangen, 03/2016}},
location = {{Erlangen}},
title = {{{Herstellung von Getränkeemulsionen mit dem innovativen Gegenstrominjektionsverfahren}}},
year = {{2016}},
}
@inproceedings{5521,
author = {{Müller, Ulrich and Pliske, Roland and Kohlus, R. and Weber, H.}},
booktitle = {{ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik (Vortrag), Erlangen, 09.-11.03.2016}},
location = {{Erlangen}},
title = {{{Untersuchungen zur Aktivität gefriergetrockneter und revitalisierter Pediococcus pentosaceus-Starterkulturen }}},
year = {{2016}},
}
@inproceedings{5522,
author = {{Pliske, Roland and Müller, Ulrich and Kohlus, R.}},
booktitle = {{ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Erlangen, 09.-11.03.2016}},
location = {{Erlangen}},
title = {{{Vergleich der statischen und dynamischen Gefriertrocknung mittels Modellierung}}},
year = {{2016}},
}
@article{5523,
author = {{Damman, Anna and Schwarzer, Knut and Schneider, Jan}},
issn = {{1619-537X}},
journal = {{Brauwelt. En español }},
pages = {{116--119}},
publisher = {{Fachverlag Hans Carl GmbH}},
title = {{{Examen de instalaciones de pasteurizatión}}},
year = {{2016}},
}
@article{5524,
author = {{Schneider, Jan}},
issn = {{2509-8853 }},
journal = {{ Getränke + Lebensmittel Herstellung : Inhaltsstoffe + Technik + Logistik : Informationen für die Wirtschaft}},
publisher = {{Kuhn}},
title = {{{Thema 2016: Morgen ist heute schon gestern. Unbeständigkeit - Segen oder Fluch?}}},
year = {{2016}},
}
@misc{5525,
author = {{Wiese, T. and Brunklaus, Sabine and Danneel, Hans-Jürgen and Reichl, N.}},
booktitle = {{Lebensmitteltechnik }},
issn = {{0047-4290 }},
number = {{12}},
pages = {{52}},
publisher = {{ Hamburg}},
title = {{{Mit Fokus auf "Lebensmittel 4.0" - Ein Projekt an der Hochschule Ostwestfalen-Lippe widmet sich dem digitalen Wandel}}},
volume = {{48}},
year = {{2016}},
}
@inproceedings{5526,
author = {{Hoffarth, Marc}},
booktitle = {{Plattformtreffen Netzwerk Brenstoffzelle und Wasserstoff, ZBT Duisburg}},
location = {{Duisburg}},
title = {{{Neumitgliedervorstellung Netzwerk Brennstoffzelle und Wasserstoff}}},
year = {{2016}},
}
@inproceedings{5528,
author = {{Rossmann, Sören and Merck, C. and Kohlus, R. and Schneider, Jan and Müller, Ulrich}},
booktitle = {{GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016}},
location = {{Lemgo}},
title = {{{Einfluss der Prozessparametrierung auf die Qualität von Getränkeemulsionen beim Gegenstrominjektionsverfahren}}},
year = {{2016}},
}
@inproceedings{5529,
author = {{Lütke Föller, Anna and Schwarzer, Knut and Wilhelm, Patrick and Müller, Ulrich and Ollesch, K. and Schiller, T.}},
booktitle = {{GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016}},
location = {{Lemgo}},
title = {{{Erste Erfahrungen mit einer Strömungszelle zur Aufnahme von Reinigungskinetiken von Werkstoffoberflächen}}},
year = {{2016}},
}
@inproceedings{5530,
author = {{Walter, S. and Steffens, M. and Zapp, Jürgen and Schneider, Jan}},
booktitle = {{GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016}},
location = {{Lemgo}},
title = {{{Stabilität von mit funktionellen Caseinhydrolysaten angereicherten fruchtsafthaltigen Getränken }}},
year = {{2016}},
}
@inproceedings{5531,
author = {{Rossmann, S. and Kohlus, R. and Müller, Ulrich and Schneider, Jan}},
booktitle = {{GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016}},
location = {{Lemgo}},
title = {{{Einfluss forcierter Lagerbedingungen auf die chemisch-physikalische Stabilität von Getränkeemulsionen}}},
year = {{2016}},
}
@inproceedings{5532,
author = {{Schwarzer, Knut and Gerke, S. and Wolff, V. and Schneider, Jan}},
booktitle = {{GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016}},
location = {{Lemgo}},
title = {{{Pasteurisation von Obstkonserven - Auswirkung der Gebindeform, der Viskosität und der Stückigkeit des Pasteurisationsgutes auf die tatsächlich applizierten Pasteurisationseinheiten}}},
year = {{2016}},
}
@inproceedings{5533,
author = {{Nolte, Timo and Wittkötter, K. and Zapp, Jürgen}},
booktitle = {{GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016}},
location = {{Lemgo}},
title = {{{Fehlaromen in der Eberfleischproduktion - Aktuelle Erkenntnisse}}},
year = {{2016}},
}
@inproceedings{5534,
author = {{Westerholt, J. and Zapp, Jürgen}},
booktitle = {{GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016}},
location = {{Lemgo}},
title = {{{Einfluss des Röstverfahrens auf die Bekömmlichkeit von Kaffee unter besonderer Berücksichtigung organischer Säuren}}},
year = {{2016}},
}
@misc{969,
abstract = {{Why is the society performing heavy self-revelation in the social network? What is the role of “selfie – a self-image” in everyday life? How have “selfies” spread? May the spread of selfies become dangerous? The thesis investigates those questions based on the methodology of a qualitative content analysis using a criteria catalogue. A comparison between selected images drawn on Instagram is done with this method. The theoretical part focuses on the spread difference, the difference in age and the privacy policy. A survey on the topic “selfie” is also intended to support the work.}},
author = {{Kongsoma, Busaba}},
keywords = {{Datenschutz, Fotografie, Selfie, Soziales Netzwerk}},
pages = {{68}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Selfie - Fotografie in den sozialen Netzwerken und deren soziokulturelle Differenzen}}},
year = {{2016}},
}
@misc{971,
author = {{Tencha, Marlene}},
keywords = {{Dokumentarfilm, Ecuador, Tourismus}},
pages = {{42}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Dokumentation der Bachelorarbeit "Shuar"}}},
year = {{2016}},
}
@misc{973,
abstract = {{Avantgarde, Flapper-Dress, Charleston, Roaring. Diese Begriffe werden mit den sogenannten goldenen 20er Jahren assoziiert, eine Zeit, die sowohl gesellschaftlich, als auch stiltechnisch neue Maßstäbe setzte. Motto-Partys und auch fotografische Werke der Neuzeit verdeutlichen, die immer noch währende Faszination dieses Jahrzehnts. Intention meiner Arbeit ist es diese goldenen Jahre und den Charme ihrer Zeit wieder aufleben zu lassen und sie mit einem eigenen Stil möglichst historisch genau fotografisch zu verbildlichen. Im Fokus stehen hierbei vor allem die Lebensfreude und die Dekadenz der Dekade.}},
author = {{Eikenberg, Alica}},
keywords = {{Fotografie, Zeitgeschichte}},
pages = {{83}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{The golden years}}},
year = {{2016}},
}
@misc{974,
author = {{Basokur, Tuna}},
keywords = {{Cinematographie, Fotografie, Fotografisches Verfahren, Schwarz-Weiß-Film}},
pages = {{65}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Fotografie im Filmstil der 1930er Jahre}}},
year = {{2016}},
}
@book{9757,
abstract = {{Anders als etwa bei einzelnen ökologischen oder geografischen Aspekten, hinsichtlich derer ein Raum betrachtet werden kann, geht es bei Landschaft1 um ein Phänomen, das großen Teilen der Bevölkerung unmittelbar vertraut ist. Weil Landschaft durch Konstruktion in den Köpfen von Menschen entsteht, kann deren Untersuchung keine des Raums allein sein, sondern muss vor allem eine der Wahrnehmung der Landschaft sein. Althergebrachte Landschaftsbewertungsmethoden erfüllen diese Anforderung schon deswegen nicht, weil sie überwiegend durch (wenige) Fachleute bedient werden.}},
author = {{Stemmer, Boris}},
isbn = {{978-3-658-13605-5}},
pages = {{435}},
publisher = {{Springer VS }},
title = {{{Kooperative Landschaftsbewertung in der räumlichen Planung: Sozialkonstruktivistische Analyse der Landschaftswahrnehmung der Öffentlichkeit: Dissertation an der Universität Kassel unter dem Titel: Neue Landschaftliche Leitbilder - Landschaftsbewertung durch Web-GIS-basierte Kommunikationstechnik}}},
doi = {{10.1007/978-3-658-13606-2}},
year = {{2016}},
}
@misc{976,
author = {{Oberfrank, Eva Eldrid}},
keywords = {{Dokumentarfilm, Leave No Stone Unturned, Reisefilm, Filmanalyse, Inhalt, Stilmittel, Wirkungen}},
pages = {{65}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Das fremde Land im Reisefilm : Die Unterschiede und Wirkungen verschiedener Dokumentationsformate}}},
year = {{2016}},
}
@misc{978,
author = {{Unger, Katja}},
keywords = {{Klein- und Mittelbetrieb, Marketing, Social Media}},
pages = {{45}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Social Media Marketing : Inwiefern kann Social Media als Teil des Marketing-Mix von Unternehmen gebraucht werden?}}},
year = {{2016}},
}
@misc{980,
author = {{Stodiek, Jannik}},
keywords = {{Computerunterstützte Kommunikation, Journalismus, Produktion, Videoproduktion}},
pages = {{92}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Produktion und Analyse von journalistischen Web-Videos}}},
year = {{2016}},
}
@misc{982,
abstract = {{Filmprojekte profitieren von einer strukturierten und konsequenten Entwicklungsumgebung. In dieser Arbeit werden allgemeine Workflowkonzepte eines 3D-Animationsprojekts beschrieben und an einem Beispielprojekt verdeutlicht, an welchen Stellen die Umsetzung von solchen Techniken profitiert und wie die einzelnen Produktionsphasen zusammenhängen, die ein Animationsprojekt bis zu seiner Fertigstellung durchlaufen muss.}},
author = {{Dujunov, Denis}},
keywords = {{Animationsfilm, Arbeitsablauf, Konzeption, Stereoskopischer Film}},
pages = {{74}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption eines 3D-Animationsfilmes - Dynamische Animationstechniken in 3D-Entwicklungsumgebungen}}},
year = {{2016}},
}
@misc{984,
author = {{Stuke, Julia}},
pages = {{148}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Lippe verbindet : Realisation einer Medienkampagne für Unternehmer mit Migrationshintergrund}}},
year = {{2016}},
}
@misc{986,
author = {{Kopp, Andreas}},
keywords = {{Corporate Design, Corporate Identity, Klein- und Mittelbetrieb}},
pages = {{68}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Erstellung und Überarbeitung des Corporate Designs der Firma IN Avia GmbH}}},
year = {{2016}},
}
@misc{988,
author = {{Ast, Sophie-Catrin}},
keywords = {{Editorial Design, Magazin, Magazinentwicklung, Magazingestaltung, Zeitschrift, Design, Konzeption, Layout, Magazin , Typografie, Zeitschrift}},
pages = {{77}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption, Gestaltung und Realisation eines Magazins : Entwicklung des neuartigen Faltmagazins „Folded“}}},
year = {{2016}},
}
@misc{990,
author = {{Gravel, Ramona}},
keywords = {{Corporate Identity, Emslandmuseum, Schloss Clemenswerth}},
pages = {{81}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Entwicklung eines medialen Konzeptes für das Emslandmuseum Schloss Clemenswerth}}},
year = {{2016}},
}
@misc{993,
author = {{Bredol, Wiebke}},
keywords = {{Arztpraxis, Corporate Identity, Kinderarzt, Konzeption, Website}},
pages = {{78}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption, Gestaltung und Realisation einer Firmenidentität für eine Kinder- und Jugendarztpraxis mit dem Schwerpunkt Corporate Identity und Websitegestaltung.}}},
year = {{2016}},
}
@misc{996,
author = {{Bartel, Nathalie}},
keywords = {{Beeinflussung, Dokumentarfilm, Dokumentarfotografie, Gefühl, Emotionen, Multimediale Dokumentation}},
pages = {{177}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Untersuchung von Einfluss und Wirkung sozialkritischer Themen anhand einer multimedialen Dokumentation - am Beispiel von „The Eyes of Hope“}}},
year = {{2016}},
}
@misc{12977,
abstract = {{Stachybotrys (S.) spp. are omnipresent cellulolytic molds. Some species are highly toxic owing to their ability to synthesize various secondary metabolites such as macrocyclic trichothecenes or hemolysins. The reliable identification of Stachybotrys at species level is currently limited to genome-based identification. This study aimed to establish a fast and reliable MALDI-TOF MS identification method by optimizing the pre-analytical steps for protein extraction for subsequent generation of high-quality fingerprint mass spectra. Eight reference strains of the American Type Culture Collection and the Technical University of Denmark were cultivated in triplicate (biological repetitions) for 2 days in malt extract broth. The mycelia (1.5 ml) were first washed with 75 % ethanol and an additional washing step with dimethyl sulfoxide (10 %) was added to remove unspecific low weight masses. Furthermore, mycelia were broken with roughened glass beads in formic acid (70 %) and acetonitrile. The method was successfully applied to a total of 45 isolates of Stachybotrys originating from three different habitats (indoor, feed, and food samples; n = 15 each): Twenty-seven isolates of S. chartarum and 18 isolates of S. chlorohalonata could be identified by MALDI-TOF MS. The data obtained exactly matched those obtained by genome-based identification. The mean score values for S. chartarum ranged from 2.509 to 2.739 and from 2.148 to 2.622 for S. chlorohalonata with a very good reproducibility: the relative standard deviations were between 0.3 % and 6.8 %. Thus, MALDI-TOF MS proved to be a fast and reliable alternative to identification of Stachybotrys spp. by nucleotide amplification and sequencing.}},
author = {{Ulrich, Sebastian and Biermaier, Barbara and Bader, Oliver and Wolf, Georg and Straubinger, Reinhard K. and Didier, Andrea and Sperner, Brigitte and Schwaiger, Karin and Gareis, Manfred and Gottschalk, Christoph}},
booktitle = {{ Analytical & bioanalytical chemistry : a merger of Fresenius' journal of analytical chemistry, Analusis and Quimica analitica}},
issn = {{1618-2650}},
keywords = {{Stachybotrys spp, MALDI-TOF MS, Mass spectrometry, Filamentous fungi}},
number = {{27}},
pages = {{7565--7581}},
publisher = {{Springer}},
title = {{{Identification of Stachybotrys spp. by MALDI-TOF mass spectrometry}}},
doi = {{10.1007/s00216-016-9800-9}},
volume = {{408}},
year = {{2016}},
}
@misc{13599,
author = {{Halbeisen, Georg and Walther, E}},
booktitle = {{Social Cognition}},
issn = {{0278-016X}},
number = {{5}},
publisher = {{Guilford}},
title = {{{Evaluative conditioning is sensitive to the encoding of CS-US contingencies}}},
doi = {{10.1521/soco.2016.34.5.462}},
volume = {{34}},
year = {{2016}},
}