@inproceedings{4881,
  author       = {{Henneke, Dominik and Wisniewski, Lukasz and Jasperneite, Jürgen}},
  booktitle    = {{12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal}},
  title        = {{{Analysis of Realizing a Future Industrial Network by Means of Software-Defined Networking (SDN)}}},
  year         = {{2016}},
}

@inproceedings{4883,
  abstract     = {{Scheduling of time triggered communication systems belongs to the well known hard mathematical optimization problems. This paper tackles the communication scheduling problem in redundant network topologies, where the real-time process data has to be duplicated and sent on two different paths to its destination. This paper proposes an algorithm that is able to find a feasible schedule in a short time, while keeping the makespan of the schedule in average 10% shorter than the makespan of the schedule produced by a commercial tool, which is the current benchmark.}},
  author       = {{Wisniewski, Lukasz and Wendt, Verena and Schumacher, Markus and Jasperneite, Jürgen and Diedrich, Christian}},
  booktitle    = {{12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal}},
  title        = {{{Scheduling of PROFINET IRT Communication in Redundant Network Topologies}}},
  year         = {{2016}},
}

@inproceedings{4885,
  author       = {{Jasperneite, Jürgen}},
  booktitle    = {{Stanford University (eingeladener Vortrag), Kalifornien, USA, März 2016}},
  title        = {{{Smart Manufacturing - Status and Open Issues}}},
  year         = {{2016}},
}

@inproceedings{4886,
  author       = {{Jasperneite, Jürgen}},
  booktitle    = {{Palo Alto Research Center (PARC, eingeladener Vortrag), Palo Alto, Kalifornien, USA, März 2016}},
  title        = {{{Intelligent Systems for the Factory of the Future}}},
  year         = {{2016}},
}

@inbook{4888,
  author       = {{Dürkop, Lars and Jasperneite, Jürgen}},
  booktitle    = {{Handbuch Industrie 4.0 Bd.2}},
  isbn         = {{9783662532478}},
  pages        = {{59--71}},
  title        = {{{„Plug & Produce“ als Anwendungsfall von Industrie 4.0}}},
  doi          = {{10.1007/978-3-662-53248-5_50}},
  volume       = {{2}},
  year         = {{2016}},
}

@book{4895,
  author       = {{Nerreter, Wolfgang and Flegel, Georg and Birnstiel, Karl and Borcherding, Holger and Meier, Uwe}},
  isbn         = {{978-3-446-44496-6}},
  publisher    = {{Carl Hanser Verlag}},
  title        = {{{Elektrotechnik für Maschinenbau und Mechatronik}}},
  year         = {{2016}},
}

@misc{4937,
  author       = {{Vetter, Andreas}},
  publisher    = {{Lippisches Landesmuseum}},
  title        = {{{Sonderausstellung : Tischchen - klein|raffiniert|funktional}}},
  year         = {{2016}},
}

@article{5053,
  abstract     = {{<jats:p>Treatment of wastewater from a tannery in Greater Ho Chi Minh City (Vietnam) was investigated on a pilot scale. After pre-treatment by the tannery that included batch-coagulation and sedimentation, the wastewater was treated by dissolved air flotation, a membrane bioreactor (MBR) and granular activated carbon (GAC) for polishing the MBR effluent. The average removal efficiency for organic substances in the MBR was 81% while total nitrogen could only be removed by 36%. The performance of the GAC column could be successfully predicted using adsorption parameters determined in laboratory experiments. A larger proportion of the organics in the MBR effluent was only weakly adsorbable, therefore the usable carbon capacity was limited as confirmed by the modelling approach. The results were used to outline the size of a technical plant with a volumetric loading rate of 3 kg COD/(m3*d) for the MBR and a specific carbon demand of about 1.8 kg/m3.</jats:p>}},
  author       = {{Fettig, Joachim and Pick, V. and Oldenburg, Martin and Phuoc, N. V.}},
  issn         = {{2220-1319}},
  journal      = {{Journal of Water Reuse and Desalination}},
  number       = {{4}},
  pages        = {{420--428}},
  title        = {{{Treatment of tannery wastewater for reuse by physico-chemical processes and a membrane bioreactor}}},
  doi          = {{10.2166/wrd.2016.036}},
  volume       = {{7}},
  year         = {{2016}},
}

@inproceedings{5084,
  author       = {{Minge, Michael and Herrlich, Marc and Lorenz, Katharina and Runge, Nina and Dannehl, Susanne}},
  booktitle    = {{Mensch und Computer 2016 – Workshopband}},
  editor       = {{Weyers, Benjamin and Dittmar, Anke}},
  location     = {{Aachen}},
  title        = {{{Motivationale Aspekte im Health Design: Gestaltung und Evaluation adhärenzfördernder therapeutischer Unterstützungssysteme}}},
  doi          = {{10.18420/MUC2016-WS02-0000}},
  year         = {{2016}},
}

@inproceedings{5085,
  author       = {{Minge, Michael and Lorenz, Katharina and Steffen, Wiebke and Gelgec, Özden}},
  booktitle    = {{Mensch und Computer 2016 – Workshopband}},
  editor       = {{Weyers, Benjamin and Dittmar, Anke}},
  location     = {{Aachen}},
  title        = {{{CreDeMo: Ein Tool zur Unterstützung der Ideenfindung bei der Gestaltung motivationsfördernder Technik}}},
  doi          = {{10.18420/MUC2016-WS02-0007}},
  year         = {{2016}},
}

@inproceedings{5086,
  abstract     = {{In diesem Beitrag werden Image Schemata genutzt, um die Grundlage für eine Tragezeitrückmeldung bei der Entwicklung einer Skoliose-App für Kinder und Jugendliche zu entwickeln. Es wurden Interviews geführt, aus denen die wichtigsten Image Schemata identifiziert werden konnten. Diese wurden durch eine zweite Erhebung empirisch überprüft und ergänzt. Anschließend wurden die verfügbaren Schemata um Aspekte der Farbwahrnehmung erweitert und durch Animationen visualisiert. Beide Sets, die Auswahl klassischer Image Schemata und diejenigen zur Farbwahrnehmung, wurden in einer dritten Erhebung verglichen und als Basis für die partizipative Gestaltung eingesetzt.}},
  author       = {{Seiboth, Diana and Minge, Michael and Dannehl, Susanne}},
  booktitle    = {{Mensch und Computer 2016 – Workshopband}},
  editor       = {{Weyers, Benjamin and Dittmar, Anke }},
  location     = {{Aachen}},
  title        = {{{Die App zum Korsett! Gestaltung der mobilen Applikation für die Skoliose-Therapie mit Image Schemata}}},
  doi          = {{10.18420/MUC2016-WS02-0009}},
  year         = {{2016}},
}

@inproceedings{5087,
  author       = {{Klamet, Josephin and Matthies, Denys J. C. and Minge, Michael}},
  booktitle    = {{Proceedings of the 3rd International Workshop on Sensor-based Activity Recognition and Interaction}},
  isbn         = {{9781450342452}},
  title        = {{{WeaRelaxAble}}},
  doi          = {{10.1145/2948963.2948965}},
  year         = {{2016}},
}

@article{5189,
  abstract     = {{<jats:p> The service–profit chain (SPC) has served as a prominent guidepost for service managers and researchers alike. This meta-analysis provides the first comprehensive test of the SPC, showing that all the proposed links are statistically significant and substantial. However, the effect sizes vary considerably, partly according to the type of service provided. Meta-analytic structural equation models show that internal service quality translates into service performance through various mechanisms beyond employee satisfaction, and they highlight the importance of the service encounter and customer relationship characteristics for customer responses. The findings not only indicate the need to integrate complementary paths in the SPC framework but also challenge the implicit SPC rationale that firms should always maximize employee satisfaction and external service quality to optimize firm performance. </jats:p>}},
  author       = {{Hogreve, Jens and Iseke, Anja and Derfuss, Klaus and Eller, Tönnjes}},
  issn         = {{0022-2429}},
  journal      = {{Journal of Marketing}},
  pages        = {{41--61}},
  title        = {{{The Service–Profit Chain: A Meta-Analytic Test of a Comprehensive Theoretical Framework}}},
  doi          = {{10.1509/jm.15.0395}},
  volume       = {{Vol. 81 (3)}},
  year         = {{2016}},
}

@article{5190,
  abstract     = {{<jats:p> In this article, we examine corporate architecture as an effective signal to knowledge workers in the recruiting process. Two types of corporate architecture that are common in the knowledge economy are distinguished: traditional functionalist and new functionalist architecture. New functionalist architecture combines a flat, transparent facade with semi-open office layouts including areas for social interaction. Holistically these functional elements signal and symbolize a non-bureaucratic, non-hierarchical organization. A conjoint analysis provides a first attempt to quantify how much students care for new functionalist architecture. Students’ stated preferences imply that they would forgo on average 10% of their starting salary in order to work in the new functionalist rather than the traditional functionalist workplace. The magnitude of this effect supports the view that architecture matters for job choice. Limitations of our study and directions for future research are discussed. </jats:p>}},
  author       = {{Radermacher, Katharina and Schneider, Martin R and Iseke, Anja and Tebbe, Tobias}},
  issn         = {{2397-0022}},
  journal      = {{German Journal of Human Resource Management: Zeitschrift für Personalforschung}},
  pages        = {{71--93}},
  title        = {{{Signalling to young knowledge workers through architecture? A conjoint analysis}}},
  doi          = {{10.1177/2397002216676038}},
  volume       = {{ Vol. 31 (1}},
  year         = {{2016}},
}

@article{5198,
  author       = {{Iseke, Anja}},
  issn         = {{0341-2687}},
  journal      = {{Schmalenbachs Zeitschrift für betriebswirtschaftliche Forschung}},
  pages        = {{186--211}},
  title        = {{{Humankapital und Sozialkapital: Gibt es einen Matthäus-Effekt bezüglich der Sozialkapitalbildung von Nachwuchsführungskräften?}}},
  doi          = {{10.1007/bf03372819}},
  volume       = {{Vol. 61 (3)}},
  year         = {{2016}},
}

@article{5205,
  author       = {{Moniz, Goncalo Canto and Quiroga, Carolina and Pottgiesser, Uta}},
  isbn         = {{978-989996450-1}},
  journal      = {{Proceedings of the 14th International Docomomo Conference - Adaptive Reuse: The Modern Movement Towards the Future}},
  pages        = {{830--832}},
  title        = {{{Education for reuse}}},
  year         = {{2016}},
}

@book{5206,
  author       = {{Knaack, Ulrich and Klein, Tillman and Bilow, Marcel and Pottgiesser, Uta and Böke, Jens and Ernst, Maximilian}},
  isbn         = {{978-94-6208-291-5 }},
  pages        = {{128}},
  title        = {{{Imagine 09 : prototyping efn mobile}}},
  year         = {{2016}},
}

@inproceedings{5207,
  abstract     = {{In offices and most other working environments a high speech privacy and a low noise level is desired to allow for concentrated work and calm work conditions. Hence a low Speech Transmission Index (STI) is required, as even irrelevant speech information at lower volumes can be extremly disturbing and performance reducing. At the same time working environments demand for other - often conflicting - requirements such as transparency to ensure visual connections and daylight transmission, functional flexibility for diverse activities in the same space and for hygienic, environmental or security aspects. These requirements have to be balanced by a sensible and intelligent design and layout of absorbers and partition elements and partition. Three research projects investigated an optimised design of low and mid frequency absorbers for working environments to improve the acoustic and design quality of different products. Acoustically optimised indoor spaces may become more important in the future due to an increase of hearing impairments in the aging population as well as in the younger generations. This is seen not only as a technical but as a design challenge to balance optimised sound pressure levels, reverberation times and Speech Transmission Indices. © 2016, German Acoustical Society (DEGA). All rights reserved.}},
  author       = {{Kirch, Chirstoph and Pottgiesser, Uta}},
  booktitle    = {{Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future}},
  keywords     = {{Additional requirements, Building types, Room acoustics}},
  location     = {{Hamburg}},
  pages        = {{3536--3547}},
  publisher    = {{German Acoustical Society (DEGA)}},
  title        = {{{Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use}}},
  year         = {{2016}},
}

@misc{5363,
  abstract     = {{Seit 2016 erscheint das urbanLab Magazin jährlich als Fachzeitschrift für Stadt- und Regionalplanung mit dem Anspruch Forschung, Lehre und der Praxis in den Planungsdisziplinen des Spannungsfeldes Stadt und Quartier anhand konkreter Themencluster besser zu vernetzen. Wir geben zukunftsweisenden Ideen, Fachbeiträgen, Publikationen und kontroversen Diskussionen eine Plattform und bringen sie unterstützt durch Erkenntnisse aus unserer Forschung auf den Punkt.}},
  booktitle    = {{Schrumpfen wir noch oder wachsen wir schon? }},
  editor       = {{Hall, Oliver and Cardinali, Marcel}},
  issn         = {{2566-8919}},
  number       = {{1}},
  title        = {{{urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung}}},
  year         = {{2016}},
}

@article{5398,
  author       = {{Dannehl, Susanne and Seiboth, Diana and Doria, Laura and Minge, Michael and Lorenz, Katharina and Thüring, Manfred and Kraft, Marc}},
  journal      = {{i-com, Journal of Interactive Media}},
  pages        = {{313--319}},
  title        = {{{A smartphone-based system to improve adherence in scoliosis therapy}}},
  volume       = {{15(3)}},
  year         = {{2016}},
}

@inproceedings{272,
  author       = {{Austermann, Johann and Stuckmann, Tim and Borcherding, Holger}},
  booktitle    = {{PCIM Europe 2016 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management : Nuremberg, 10-12 May 2016, proceedings / organizer: Mesago PCIM GmbH, Stuttgart }},
  isbn         = {{978-3-8007-4186-1}},
  keywords     = {{Leistungselektronik, Erneuerbare Energien, Energiemanagement, Antrieb <Technik>}},
  pages        = {{1639--1646}},
  publisher    = {{VDE Verlag }},
  title        = {{{ High Efficient Flyback Converter with SiC-MOSFET}}},
  year         = {{2016}},
}

@inproceedings{273,
  abstract     = {{This paper introduces an efficient modular solution kit for intralogistic drives, which reduces the total energy consumption of all drives in an automated warehouse by more than 15%. The reduction of energy consumption results from the interaction of optimized components (motors, control techniques and regeneration units), which are described in detail in this paper. Different motor concepts like the induction motor, the synchronous reluctance motor and the permanent magnet synchronous machine are compared according to the special requirements for intralogistics applications. Different control techniques are presented in order to achieve sensorless and efficient-optimal operation of these motors. The sensorless control technique uses signal injection to detect the rotor position sufficiently exact also in case of speed near standstill. Efficient-optimal operation is achieved by reducing the motor current with regard to the torque (MTPA-control). Furthermore this paper introduces a regeneration unit that can be connected between the DC link of frequency inverters and the mains to feed back regenerative energy. The regeneration unit consisting of a buck converter, a synchronous inverter and a line-filter can work in parallel to commonly used uncontrolled rectifiers. Its functioning is shown with the help of measurement results of a 1kW laboratory prototype. The last section shows a demonstrator in which a conventional conveyer system (with induction motor and braking resistor) is compared with an optimized one using the presented components. Power versus time measurements show specific energy savings resulting from the interaction of the optimized components.}},
  author       = {{Austermann, Johann and Borcherding, Holger and Stichweh, H. and Grabs, Volker}},
  booktitle    = {{2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe)}},
  isbn         = {{978-3-8007-4186-1}},
  keywords     = {{electric current control, induction motors, invertors, permanent magnet motors, reluctance motors, sensorless machine control, torque control, modular solution kit, intralogistic drives, automated warehouse, energy consumption reduction, optimized components interaction, induction motor, synchronous reluctance motor, permanent magnet synchronous machine, sensorless control technique, signal injection, rotor position, motor current, MTPA-control, regeneration unit, DC link, frequency inverters, buck converter, synchronous inverter, line-filter, Induction motors, Reluctance motors, Permanent magnet motors, Rotors, Torque, Inverters, intralogistics, reluctance motor, sensorless control, regeneration unit, braking energy}},
  location     = {{Karlsruhe}},
  pages        = {{1639--1646}},
  publisher    = {{VDE Verlag}},
  title        = {{{High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications}}},
  doi          = {{10.1109/EPE.2016.7695687}},
  year         = {{2016}},
}

@inproceedings{2928,
  author       = {{Materna, Daniel}},
  location     = {{Braunschweig}},
  title        = {{{Efficient nonlinear reanalysis for structural modifications}}},
  year         = {{2016}},
}

@misc{2991,
  author       = {{Beshay, U. and Feldt, Sebastian and Schwarze, B. and Wefing, P. and Hahne, T. and Moschinski, J. and Müller, C. and Büker, R. and Kramer, M. and Brod, H. and Frahm, Björn}},
  location     = {{Recklinghausen, Germany}},
  title        = {{{DMA Photobioreactor System – Cultivation at low shear stress and optional membrane aeration}}},
  year         = {{2016}},
}

@misc{2992,
  author       = {{Hernández Rodriguez, Tanja and Vörtler, S. and Kern, S. and Platas Barradas, O. and Pörtner, R. and Frahm, Björn}},
  location     = {{Recklinghausen, Germany}},
  title        = {{{A software tool for biopharmaceutical seed train design and optimization}}},
  year         = {{2016}},
}

@misc{2993,
  author       = {{Koopmann, K. S. and Hernández Rodriguez, Tanja and Vörtler, S. and Beshay, U. and Möller, J. and Pörtner, R. and Frahm, Björn}},
  location     = {{Koblenz, Germany}},
  title        = {{{Simulation of cell culture seed trains – investigation of the influence of parameter inaccuracies}}},
  year         = {{2016}},
}

@techreport{3017,
  abstract     = {{Studienbrief}},
  author       = {{Noosten, Dirk}},
  publisher    = {{Deutsche Akademie für Management}},
  title        = {{{Immobilienfinanzierung}}},
  year         = {{2016}},
}

@inproceedings{3086,
  author       = {{Austermann-Haun, Ute and Alt, K. and Voigt, A. and Koppmann, M. and Firk, J. and Nahrstedt, A.}},
  location     = {{Düsseldorf}},
  title        = {{{Einsatz von Ozonung in Kombination mit granulierter Aktivkohle auf den Kläranlagen Detmold und Paderborn}}},
  year         = {{2016}},
}

@article{3092,
  author       = {{Meier, J. F. and Austermann-Haun, Ute and Alt, K. and Kuhlmann, S.}},
  journal      = {{KA Korrespondenz Abwasser Abfall}},
  number       = {{1}},
  pages        = {{28 -- 36}},
  title        = {{{Pilotprojekt zur Mikroschadstoffelimination mittels Ozonung auf der ZKA Detmold}}},
  volume       = {{63}},
  year         = {{2016}},
}

@inproceedings{3183,
  author       = {{Austermann-Haun, Ute}},
  location     = {{Soltau}},
  title        = {{{Kläranlagen – Orte besonderer Korrosionsgefährdung}}},
  year         = {{2016}},
}

@inproceedings{3185,
  author       = {{Austermann-Haun, Ute}},
  location     = {{Düsseldorf}},
  title        = {{{Einsatz von Ozonung in Kombination mit granulierter Aktivkohle auf den Kläranlagen Detmold und Paderborn}}},
  year         = {{2016}},
}

@inproceedings{3186,
  author       = {{Austermann-Haun, Ute}},
  location     = {{Detmold-Blomberg}},
  title        = {{{Energy neutral wastewater treatment plant Bad Oeynhausen}}},
  year         = {{2016}},
}

@inproceedings{3187,
  author       = {{Austermann-Haun, Ute}},
  location     = {{Detmold-Blomberg}},
  title        = {{{Elimination of micro-pollutants in municipal wastewater treatment plants}}},
  year         = {{2016}},
}

@inproceedings{3188,
  author       = {{Austermann-Haun, Ute}},
  location     = {{LWL- Freilichtmuseum Detmold}},
  title        = {{{Toilette – Freud und Leid}}},
  year         = {{2016}},
}

@inproceedings{3189,
  author       = {{Austermann-Haun, Ute}},
  location     = {{Hannover, Congress Centrum}},
  title        = {{{Abwasser aus der Pektin- und Erfrischungsgetränkeindustrie}}},
  year         = {{2016}},
}

@inproceedings{327,
  author       = {{Austermann, Johann and Borcherding, Holger and Mallwitz, R.}},
  location     = {{Freiburg}},
  title        = {{{Einsatz  eines  SiC - MOSFETs  in  einem  Energierückspeisungsmodul für Frequenzumrichter}}},
  year         = {{2016}},
}

@misc{332,
  abstract     = {{The invention relates to a circuit and to a method for operating an electrical machine (M) connected to at least three phases (L1, L2, L3) of a power supply network by means of a frequency converter (1) that has a DC link (3), wherein, by means of a synchronous inverter (7) that is actuated by a DC chopper (6) and comprises two bridge halves switching the positive and the negative half-waves respectively, the energy generated by said machine (M) is fed back into the power supply network. According to the invention, the synchronous inverter (7) has an asymmetrical design such that, to switch the potential tapped from the DC link (3) by the DC chopper (6), switching is carried out by a first bridge half (8) that consists of thyristors (S1, S3, S5) as electronic switches, and such that the second bridge half (9) comprises reverse-blocking electronic switches (S2, S4, S6) able to be switched off.}},
  author       = {{Austermann, Johann and Borcherding, Holger}},
  pages        = {{6}},
  title        = {{{Circuit and Method for Multiphase Operation of an Electrical Machine}}},
  year         = {{2016}},
}

@proceedings{333,
  abstract     = {{The annual International Conference on Production Engineering and Management takes place for the sixth time his year, and can therefore be considered a well - established event that is the result of the joint effort of the OWL University of Applied Sciences and the University of Trieste. The conference has been established as an annual meeting under the Double Degree Master Program ‘Production Engineering and Management’ by the two partner universities.
The main goal of the conference is to provide an opportunity for students, researchers and professionals from Germany, Italy and abroad, to meet and exchange information, discuss experiences, specific practices and technical solutions used in planning, design and management of production and service systems. In addition, the conference is a platform aimed at presenting research projects, introducing young academics to the tradition of 
Symposiums and promoting the exchange of ideas between the industry and the academy. Especially the contributions of successful graduates of the Double Degree Master Program ‘Production Engineering and Management’ and those of other postgraduate researchers from several European countries have been enforced. 

This year’s special focus is on Direct Digital Manufacturing in the context of Industry 4.0, a topic of great interest for the global industry. The concept is spreading, but the actual solutions must be presented in order to highlight 
the practical benefits to industry and customers. Indeed, as Henning Banthien, Secretary General of the German 
‘Plattform Industrie 4.0’ project office, has recently remarked, “Industry 4.0 requires a close alliance amongst the private sector, academia, politics and trade unions” in order to be “translated into practice and be implemented now”. 
PEM 2016 takes place between September 29 and 30, 2016 at the OWL University of Applied Sciences in Lemgo. The program is defined by the Organizing and Scientific Committees and clustered into scientific sessions 
covering topics of main interest and importance to the participants of the conference. The scientific sessions deal
with technical and engineering issues, as well as management topics, and include contributions by researchers from academia and industry. The extended abstracts and full papers of the contributions underwent a double -
blind review process. The 24 accepted presentations are assigned, according to their subject, to one of the following sessions: ‘Direct Digital Manufacturing in the Context of Industry 4.0’, ‘Industrial Engineering and Lean Management’, ‘Management Techniques and Methodologies’, ‘Wood Processing Technologies and Furniture Production’ and ‘Innovation Techniques and Methodologies.}},
  editor       = {{Villmer, Franz-Josef and Padoano, Elio}},
  isbn         = {{978-3-946856-00-9}},
  location     = {{Lemgo}},
  number       = {{1}},
  pages        = {{304}},
  title        = {{{Production Engineering and Management}}},
  year         = {{2016}},
}

@article{3331,
  author       = {{Kutz, Gerd and Kamke, Dominic}},
  issn         = {{2191-8341}},
  journal      = {{TechnoPharm : making science work}},
  number       = {{5}},
  pages        = {{290--294}},
  publisher    = {{ECV}},
  title        = {{{ Innovativer Ansatz zur Prozesskontrolle bei der Granulation im Intensivmischergranulator (Teil 2)}}},
  volume       = {{6}},
  year         = {{2016}},
}

@article{3332,
  author       = {{Kutz, Gerd and Kamke, Dominic}},
  issn         = {{2191-8341}},
  journal      = {{TechnoPharm : making science work }},
  number       = {{4}},
  pages        = {{234--239}},
  publisher    = {{ECV}},
  title        = {{{Innovativer Ansatz zur Prozesskontrolle bei der Granulation im Intensivmischergranulator (Teil 1)}}},
  volume       = {{6}},
  year         = {{2016}},
}

@inproceedings{3333,
  author       = {{Kutz, Gerd}},
  location     = {{Köln}},
  publisher    = {{TÜV Rheinland LGA Products GmbH}},
  title        = {{{Anforderungen an die aseptische Herstellung}}},
  year         = {{2016}},
}

@inproceedings{3341,
  author       = {{Kutz, Gerd}},
  location     = {{Köln}},
  publisher    = {{TÜV Rheinland LGA Products GmbH}},
  title        = {{{Sterilfiltration}}},
  year         = {{2016}},
}

@inproceedings{3395,
  author       = {{Kutz, Gerd}},
  location     = {{Köln}},
  publisher    = {{TÜV Rheinland LGA Products GmbH}},
  title        = {{{Filterintegritätstests }}},
  year         = {{2016}},
}

@inproceedings{3396,
  author       = {{Kutz, Gerd}},
  location     = {{TÜV Rheinland LGA Products GmbH in Köln.}},
  title        = {{{Sterilisations- und Desinfektionsverfahren}}},
  year         = {{2016}},
}

@inproceedings{3397,
  author       = {{Kutz, Gerd}},
  location     = {{TÜV Rheinland LGA Products GmbH in Köln}},
  title        = {{{Media Fill - Prozesssimulation mit Nährmedien}}},
  year         = {{2016}},
}

@inproceedings{3416,
  author       = {{Kutz, Gerd}},
  location     = {{Bonn}},
  title        = {{{Messmethoden (sichtbare Partikel), Methoden des Ph. Eur}}},
  year         = {{2016}},
}

@inproceedings{3417,
  author       = {{Kutz, Gerd}},
  location     = {{Tübingen}},
  title        = {{{Qualifizierung, Kalibrierung, Reinigungsvalidierung, Prozessparameter, Prozessvalidierung}}},
  year         = {{2016}},
}

@article{3418,
  author       = {{Kutz, Gerd and Kamke, Dominic}},
  issn         = {{1434-8942 }},
  journal      = {{  Pharma + Food : Effizienz im Hygieneprozess : Ausrüstung, Produktion, Organisation}},
  number       = {{4}},
  pages        = {{36--38}},
  publisher    = {{Hüthig}},
  title        = {{{Dem Intensivmischer auf der Spur: Echtzeit- Prozesskontrolle}}},
  year         = {{2016}},
}

@article{3492,
  author       = {{Könneker, Martin and Jungkind, Wilfried}},
  issn         = {{1434-1980}},
  journal      = {{Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse}},
  number       = {{3}},
  pages        = {{78 -- 81}},
  publisher    = {{GIZO-Verlag}},
  title        = {{{Systematisches und nachhaltiges Betriebsmittelmanagement / Management of Manufacturing Resources - Systematic and Sustainable}}},
  volume       = {{32}},
  year         = {{2016}},
}

@article{3493,
  author       = {{Jungkind, Wilfried and Helmrich, Ingo}},
  issn         = {{0947-0085}},
  journal      = {{ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb}},
  number       = {{111 / 3}},
  pages        = {{139 -- 142}},
  publisher    = {{Hanser}},
  title        = {{{Montagegerechte Produktgestaltung im Produktentwicklungsprozess}}},
  volume       = {{2016}},
  year         = {{2016}},
}

@inbook{3555,
  author       = {{Bochning, Stefan and Riedl, Ulrich}},
  booktitle    = {{Teaching X change (Innovative Lehrideen und -formate an der Hochschule Ostwestfalen-Lippe)}},
  editor       = {{Ternes, Doris and To, Kieu-Anh and Eller-Studzinsky, Bettina}},
  pages        = {{79 -- 87}},
  title        = {{{Das „Synthese-Modul 3 Umwelt und Freiraum“ (9122) im Bachelor-Studiengang Landschaftsarchitektur}}},
  volume       = {{1}},
  year         = {{2016}},
}

@article{3556,
  author       = {{Lohr, Mathias and Riedl, Ulrich}},
  issn         = {{2190-7234}},
  journal      = {{ Auenmagazin : Magazin des Auenzentrums Neuburg a.d. Donau }},
  number       = {{10}},
  pages        = {{38 -- 42}},
  publisher    = {{Auenzentrum}},
  title        = {{{Durch Insekten Auen besser verstehen – Schaukästen (Dioramen) für das NaturForum Bislicher Insel}}},
  year         = {{2016}},
}

@article{3558,
  author       = {{Herber, Katrin and Riedl, Ulrich}},
  journal      = {{Auenmagazin (Magazin des Auenzentrums Neuburg a.d.Donau)}},
  number       = {{09}},
  pages        = {{29}},
  title        = {{{Jahrestagung des Bildungsnetzwerks Aue an der Hochschule Ostwestfalen-Lippe (OWL) in Höxter}}},
  year         = {{2016}},
}

@book{946,
  abstract     = {{Die Studierenden des Bachelorstudiengangs Medienproduktion an der Hochschule Ostwestfalen-Lippe haben sich im Wintersemester 2015/16 gezielt mit der mobilen Berichterstattung im Hörfunk, dem Bereich WebDoku oder auch dem Phänomen des Printmagazins Landlust beschäftigt. Dabei haben Sie im Semesterverlauf neben Fachvorträgen und selbst entwickelten Workshops erste eigene wissenschaftliche Artikel verfasst, von denen eine Auswahl Eingang in diesen Seminarband gefunden hat. Sie spiegeln sowohl unterschiedliche Erfahrungen der Studierenden als auch unterschiedliche Herangehensweisen an die bearbeiteten Themen wider. Gleichzeitig sind sie eine Momentaufnahme in Zeiten der ständig voranschreitenden Medienkonvergenz. }},
  author       = {{Führer, Melina and Nehrkorn, Katharina Zoe and Rutkowski, Lutz and Wistinghausen, Carolin and Werner, Lena and Urfels, Ole Vincent and Werthschulte, Carolin}},
  editor       = {{Lechtenberg, Frank}},
  isbn         = {{978-3-7418-6027-0 }},
  keywords     = {{Landlust, Journalismus, Journalisten, Reportage, Bildmanipulation, Online, Fernsehreportage, Krisenberichterstattung}},
  pages        = {{212}},
  publisher    = {{epubli, Selbstverlag des Vereins Medienwerk e.V.}},
  title        = {{{Perspektiven im Journalismus Ein Seminarband des Kurses Journalismus 2 im Sommersemester 2015 an der Hochschule Ostwestfalen-Lippe}}},
  year         = {{2016}},
}

@misc{950,
  abstract     = {{Diese Masterarbeit befasst sich mit der Thematik des Renderings in MAXON Cinema 4D und der These, dass die neu entwickelte Rendersoftware NVIDIA® Iray® für den Anwender und für mittelständische Unternehmen effizienter ist als die schon integrierte physikalische Standard-Rendersoftware. Die Methoden und wichtigsten Parameter werden immer mit Bezug auf Iray® erläutert, sodass die Aussage der Anfangsthese im Fazit begründet oder widerlegt werden kann.}},
  author       = {{Düchting, Andre}},
  keywords     = {{Rendering, NVIDIA, Iray, BRDF, BSDF, MDL, GI, AO, Shading, Lighting, Bidirektionale Reflektanzverteilungsfunktion, GI, Iray, Lichtregie, Music Description Language, NVIDIA Corporation (Santa Clara, Calif.), Rendering}},
  pages        = {{100}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{RENDERING mit Bezug auf NVIDIA® Iray® in Cinema 4D}}},
  year         = {{2016}},
}

@misc{952,
  author       = {{Rosanna Saurin, Vita}},
  keywords     = {{Stereoskopischer Film, Virtuelle Realität}},
  pages        = {{30}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Potenzial von Virtual Reality. Der neue Standard oder nur ein Hype?}}},
  year         = {{2016}},
}

@misc{954,
  author       = {{Janko, Ulrike}},
  keywords     = {{Design Manual, Logo, Ulrike Janko, Corporate Identity, Entwicklung, Naturheilkunde, Planung, Realisierung, Werbekonzeption}},
  pages        = {{105}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Konzeption, Gestaltung und Realisation eines Corporate Designs für die Naturheilkundepraxis von Corrina Koch in Kassel}}},
  year         = {{2016}},
}

@misc{957,
  author       = {{Krips, Nadine}},
  keywords     = {{Marketingstrategie, Online-Marketing, Virtuelle Realität}},
  pages        = {{36}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Vergleich von Virtual Reality mit ähnlicher Unterhaltungselektronik anhand der Analyse dazugehöriger Marketingstrategien : Untersuchung auf Ähnlichkeiten und Gründe gegebener Misserfolge}}},
  year         = {{2016}},
}

@misc{959,
  author       = {{Pepperl, Stephanie}},
  keywords     = {{Facebook, Planung, Realisierung, Soziales Netzwerk, Vermarktung}},
  pages        = {{90}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Planung und Realisierung einer Social Media Fanpage : am Beispiel einer regionalen Werbe- und Veranstaltungsplattform}}},
  year         = {{2016}},
}

@misc{961,
  author       = {{Urfels, Ole}},
  keywords     = {{Deutschland. Bundesregierung, Social Media, United Nations}},
  pages        = {{78}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Social Media Strategie von Bundesregierung und UN - Analyse und Vergleich}}},
  year         = {{2016}},
}

@misc{963,
  author       = {{Reetz, Dennis}},
  keywords     = {{Corporate Design Manual, Software as a Service, Webentwicklung, Cloud Computing, Corporate Design, Digitalisierung}},
  pages        = {{97}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Konzeption einer Webanwendung als Software as a Service-Dienst f\"ur die Erstellung, Verwaltung und Bereitstellung von Gestaltungsrichtlinien}}},
  year         = {{2016}},
}

@misc{965,
  abstract     = {{Pocket Guide zum Thema Grundlagen Grafikdesign}},
  author       = {{Ellerbrok, Daniela}},
  keywords     = {{Design, Gebrauchsgrafik, Kommunikationsdesign, Visualisierung}},
  pages        = {{98}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Grundlagen Grafikdesign}}},
  year         = {{2016}},
}

@misc{967,
  author       = {{Akulenko, Kateryna}},
  keywords     = {{Bildband, Bildpublizistik, Fotografie}},
  pages        = {{76}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Rolle des Bildbandes im Fotojournalismus}}},
  year         = {{2016}},
}

@misc{969,
  abstract     = {{Why is the society performing heavy self-revelation in the social network? What is the role of “selfie – a self-image” in everyday life? How have “selfies” spread? May the spread of selfies become dangerous? The thesis investigates those questions based on the methodology of a qualitative content analysis using a criteria catalogue. A comparison between selected images drawn on Instagram is done with this method. The theoretical part focuses on the spread difference, the difference in age and the privacy policy. A survey on the topic “selfie” is also intended to support the work.}},
  author       = {{Kongsoma, Busaba}},
  keywords     = {{Datenschutz, Fotografie, Selfie, Soziales Netzwerk}},
  pages        = {{68}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Selfie - Fotografie in den sozialen Netzwerken und deren soziokulturelle Differenzen}}},
  year         = {{2016}},
}

@misc{971,
  author       = {{Tencha, Marlene}},
  keywords     = {{Dokumentarfilm, Ecuador, Tourismus}},
  pages        = {{42}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Dokumentation der Bachelorarbeit "Shuar"}}},
  year         = {{2016}},
}

@misc{973,
  abstract     = {{Avantgarde, Flapper-Dress, Charleston, Roaring. Diese Begriffe werden mit den sogenannten goldenen 20er Jahren assoziiert, eine Zeit, die sowohl gesellschaftlich, als auch stiltechnisch neue Maßstäbe setzte. Motto-Partys und auch fotografische Werke der Neuzeit verdeutlichen, die immer noch währende Faszination dieses Jahrzehnts. Intention meiner Arbeit ist es diese goldenen Jahre und den Charme ihrer Zeit wieder aufleben zu lassen und sie mit einem eigenen Stil möglichst historisch genau fotografisch zu verbildlichen. Im Fokus stehen hierbei vor allem die Lebensfreude und die Dekadenz der Dekade.}},
  author       = {{Eikenberg, Alica}},
  keywords     = {{Fotografie, Zeitgeschichte}},
  pages        = {{83}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{The golden years}}},
  year         = {{2016}},
}

@misc{974,
  author       = {{Basokur, Tuna}},
  keywords     = {{Cinematographie, Fotografie, Fotografisches Verfahren, Schwarz-Weiß-Film}},
  pages        = {{65}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Fotografie im Filmstil der 1930er Jahre}}},
  year         = {{2016}},
}

@book{9757,
  abstract     = {{Anders als etwa bei einzelnen ökologischen oder geografischen Aspekten, hinsichtlich derer ein Raum betrachtet werden kann, geht es bei Landschaft1 um ein Phänomen, das großen Teilen der Bevölkerung unmittelbar vertraut ist. Weil Landschaft durch Konstruktion in den Köpfen von Menschen entsteht, kann deren Untersuchung keine des Raums allein sein, sondern muss vor allem eine der Wahrnehmung der Landschaft sein. Althergebrachte Landschaftsbewertungsmethoden erfüllen diese Anforderung schon deswegen nicht, weil sie überwiegend durch (wenige) Fachleute bedient werden.}},
  author       = {{Stemmer, Boris}},
  isbn         = {{978-3-658-13605-5}},
  pages        = {{435}},
  publisher    = {{Springer VS }},
  title        = {{{Kooperative Landschaftsbewertung in der räumlichen Planung: Sozialkonstruktivistische Analyse der Landschaftswahrnehmung der Öffentlichkeit: Dissertation an der Universität Kassel unter dem Titel: Neue Landschaftliche Leitbilder - Landschaftsbewertung durch Web-GIS-basierte Kommunikationstechnik}}},
  doi          = {{10.1007/978-3-658-13606-2}},
  year         = {{2016}},
}

@misc{976,
  author       = {{Oberfrank, Eva Eldrid}},
  keywords     = {{Dokumentarfilm, Leave No Stone Unturned, Reisefilm, Filmanalyse, Inhalt, Stilmittel, Wirkungen}},
  pages        = {{65}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Das fremde Land im Reisefilm : Die Unterschiede und Wirkungen verschiedener Dokumentationsformate}}},
  year         = {{2016}},
}

@misc{978,
  author       = {{Unger, Katja}},
  keywords     = {{Klein- und Mittelbetrieb, Marketing, Social Media}},
  pages        = {{45}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Social Media Marketing : Inwiefern kann Social Media als Teil des Marketing-Mix von Unternehmen gebraucht werden?}}},
  year         = {{2016}},
}

@misc{980,
  author       = {{Stodiek, Jannik}},
  keywords     = {{Computerunterstützte Kommunikation, Journalismus, Produktion, Videoproduktion}},
  pages        = {{92}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Produktion und Analyse von journalistischen Web-Videos}}},
  year         = {{2016}},
}

@misc{982,
  abstract     = {{Filmprojekte profitieren von einer strukturierten und konsequenten Entwicklungsumgebung. In dieser Arbeit werden allgemeine Workflowkonzepte eines 3D-Animationsprojekts beschrieben und an einem Beispielprojekt verdeutlicht, an welchen Stellen die Umsetzung von solchen Techniken profitiert und wie die einzelnen Produktionsphasen zusammenhängen, die ein Animationsprojekt bis zu seiner Fertigstellung durchlaufen muss.}},
  author       = {{Dujunov, Denis}},
  keywords     = {{Animationsfilm, Arbeitsablauf, Konzeption, Stereoskopischer Film}},
  pages        = {{74}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Konzeption eines 3D-Animationsfilmes - Dynamische Animationstechniken in 3D-Entwicklungsumgebungen}}},
  year         = {{2016}},
}

@misc{984,
  author       = {{Stuke, Julia}},
  pages        = {{148}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Lippe verbindet : Realisation einer Medienkampagne für Unternehmer mit Migrationshintergrund}}},
  year         = {{2016}},
}

@misc{986,
  author       = {{Kopp, Andreas}},
  keywords     = {{Corporate Design, Corporate Identity, Klein- und Mittelbetrieb}},
  pages        = {{68}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Erstellung und Überarbeitung des Corporate Designs der Firma IN Avia GmbH}}},
  year         = {{2016}},
}

@misc{988,
  author       = {{Ast, Sophie-Catrin}},
  keywords     = {{Editorial Design, Magazin, Magazinentwicklung, Magazingestaltung, Zeitschrift, Design, Konzeption, Layout, Magazin <Zeitschrift>, Typografie, Zeitschrift}},
  pages        = {{77}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Konzeption, Gestaltung und Realisation eines Magazins : Entwicklung des neuartigen Faltmagazins „Folded“}}},
  year         = {{2016}},
}

@misc{990,
  author       = {{Gravel, Ramona}},
  keywords     = {{Corporate Identity, Emslandmuseum, Schloss Clemenswerth}},
  pages        = {{81}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Entwicklung eines medialen Konzeptes für das Emslandmuseum Schloss Clemenswerth}}},
  year         = {{2016}},
}

@misc{993,
  author       = {{Bredol, Wiebke}},
  keywords     = {{Arztpraxis, Corporate Identity, Kinderarzt, Konzeption, Website}},
  pages        = {{78}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Konzeption, Gestaltung und Realisation einer Firmenidentität für eine Kinder- und Jugendarztpraxis mit dem Schwerpunkt Corporate Identity und Websitegestaltung.}}},
  year         = {{2016}},
}

@misc{996,
  author       = {{Bartel, Nathalie}},
  keywords     = {{Beeinflussung, Dokumentarfilm, Dokumentarfotografie, Gefühl, Emotionen, Multimediale Dokumentation}},
  pages        = {{177}},
  publisher    = {{Hochschule Ostwestfalen-Lippe}},
  title        = {{{Untersuchung von Einfluss und Wirkung sozialkritischer Themen anhand einer multimedialen Dokumentation - am Beispiel von „The Eyes of Hope“}}},
  year         = {{2016}},
}

@misc{12977,
  abstract     = {{Stachybotrys (S.) spp. are omnipresent cellulolytic molds. Some species are highly toxic owing to their ability to synthesize various secondary metabolites such as macrocyclic trichothecenes or hemolysins. The reliable identification of Stachybotrys at species level is currently limited to genome-based identification. This study aimed to establish a fast and reliable MALDI-TOF MS identification method by optimizing the pre-analytical steps for protein extraction for subsequent generation of high-quality fingerprint mass spectra. Eight reference strains of the American Type Culture Collection and the Technical University of Denmark were cultivated in triplicate (biological repetitions) for 2 days in malt extract broth. The mycelia (1.5 ml) were first washed with 75 % ethanol and an additional washing step with dimethyl sulfoxide (10 %) was added to remove unspecific low weight masses. Furthermore, mycelia were broken with roughened glass beads in formic acid (70 %) and acetonitrile. The method was successfully applied to a total of 45 isolates of Stachybotrys originating from three different habitats (indoor, feed, and food samples; n = 15 each): Twenty-seven isolates of S. chartarum and 18 isolates of S. chlorohalonata could be identified by MALDI-TOF MS. The data obtained exactly matched those obtained by genome-based identification. The mean score values for S. chartarum ranged from 2.509 to 2.739 and from 2.148 to 2.622 for S. chlorohalonata with a very good reproducibility: the relative standard deviations were between 0.3 % and 6.8 %. Thus, MALDI-TOF MS proved to be a fast and reliable alternative to identification of Stachybotrys spp. by nucleotide amplification and sequencing.}},
  author       = {{Ulrich, Sebastian and Biermaier, Barbara and Bader, Oliver and Wolf, Georg and Straubinger, Reinhard K. and Didier, Andrea and Sperner, Brigitte and Schwaiger, Karin and Gareis, Manfred and Gottschalk, Christoph}},
  booktitle    = {{  Analytical & bioanalytical chemistry : a merger of Fresenius' journal of analytical chemistry, Analusis and Quimica analitica}},
  issn         = {{1618-2650}},
  keywords     = {{Stachybotrys spp, MALDI-TOF MS, Mass spectrometry, Filamentous fungi}},
  number       = {{27}},
  pages        = {{7565--7581}},
  publisher    = {{Springer}},
  title        = {{{Identification of Stachybotrys spp. by MALDI-TOF mass spectrometry}}},
  doi          = {{10.1007/s00216-016-9800-9}},
  volume       = {{408}},
  year         = {{2016}},
}

@misc{13599,
  abstract     = {{Evaluative conditioning (EC), the change in the evaluation of a neutral "conditioned" stimulus (CS) that is due to its pairing with a liked or disliked "unconditioned" stimulus (US; De Houwer, 2007), has only sometimes been found to depend on the CS-US contingency, that is, on the predictive relation between CS and US occurrences. In the research reported here, we hypothesize that this is a result of the way EC procedures can bias the encoding of CS-US contingencies and therefore bias contingency learning. This may have prevented previous investigations from detecting contingency effects despite EC being sensitive to the encoding of CS-US contingencies. In support of this hypothesis, we show that measured (Experiments 1 a and 1 b) and manipulated (Experiment 2) differences in contingency learning predict the effect of CS-US contingency on EC. Implications for the underlying processes of EC are discussed.}},
  author       = {{Halbeisen, Georg and Walther, E}},
  booktitle    = {{Social Cognition}},
  issn         = {{0278-016X}},
  number       = {{5}},
  publisher    = {{Guilford}},
  title        = {{{Evaluative conditioning is sensitive to the encoding of CS-US contingencies}}},
  doi          = {{10.1521/soco.2016.34.5.462}},
  volume       = {{34}},
  year         = {{2016}},
}