@misc{860, author = {{Braun, Paul}}, keywords = {{Fernsehserien, Quality-TV, Qualitätsserien, Serien, TV-Serien}}, pages = {{91}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Die Relevanz von Thompsons Qualitätskriterien für heutige Serien.}}}, year = {{2017}}, } @misc{868, author = {{Warkentin, Wladislaw}}, keywords = {{Bedeutung, Dokumentarfilm, Dokumentation, Vorproduktion Preproduction}}, pages = {{194}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Die Bedeutung der Vorproduktion im Entstehungsprozess eines Dokumentarfilmes}}}, year = {{2017}}, } @misc{870, abstract = {{Ist kürzer immer besser? Diese Arbeit untersucht verschiedene Erfolgsfaktoren für Werbevideos auf YouTube, insbesondere wurde die These untersucht, ob kürzer Werbespots tendenziell erfolgreicher sind. Der Vergleich verschiedener Tests und Studien zum Nutzerverhalten zeigte im theoretischen Teil, dass insbesondere die Ansprache der Zielgruppe durch eine passende Dramaturgie wichtig ist. Kürzere Spots um 15 Sekunden konnten Nutzer eher zum Anklicken der Anzeige bewegen, während lange Spots eine engere Bindung aufbauen konnten. Im praktischen Teil wurden in Zusammenarbeit mit einer Online Marketing Agentur drei inhaltlich gleiche Werbespots mit der Zielgruppe Geschäftskunden in Schnittfassungen von 8, 18 und 30 Sekunden auf YouTube geschaltet. Wie auch im Theorieteil herausgefunden, zeigte auch die Analyse der drei Werbespots, dass der kurze Spot das beste Kosten-Nutzen- Verhältnis für den Werbetreibenden hatte. }}, author = {{Trappmann, Michael}}, keywords = {{YouTube}}, pages = {{111}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Optimierung von YouTube Werbespots am Beispiel einer Online Marketing Agentur}}}, year = {{2017}}, } @misc{872, abstract = {{Die vorliegende Masterarbeit beschäftigt sich mit der Integration digitaler Noten in den Produktionsprozess klassischer Musik. Trotz der inzwischen vollständig digitalen Aufnahme und Nachbearbeitung von Musik wird in der Regel mit gedruckten Notenmaterialien gearbeitet. Dieser Bruch in der Medienverwendung führt bei der Nachbearbeitung des Audiomaterials zu Zeitverlusten, da stetig zwischen Computerbildschirm und Papiernoten gewechselt werden muss. Im Rahmen dieser Arbeit wurde ein Lösungsansatz entwickelt, der diesen Medienbruch umgeht. Aufgenommenes Audiomaterial und die Darstellung digitaler Noten auf dem Computer werden dabei synchronisiert. In der Praxis wird dadurch die Navigation innerhalb der Aufnahmeprojekte effektiv beschleunigt. Eine Vorstudie konnte zeigen, dass die Zeit für das Auffinden von Audio-Positionen anhand von Noteneintragungen – eine während des Schnitts häufig wiederkehrende Aufgabe – um durchschnittlich 79% gesenkt wurde.}}, author = {{Waloschek, Simon}}, keywords = {{Musikproduktion, Noten}}, pages = {{71}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Interaktive Partituren in der Musikproduktion}}}, year = {{2017}}, } @misc{874, abstract = {{Die vorliegende Masterarbeit gibt einen Überblick über die Wirkung der Farbauswahl in der audiovisuellen Werbung von Getränkeprodukten, insbesondere von Bierprodukten. Dabei wird dieWirkung der Farben auf Menschen untersucht. Anschließend werden die Farben von dem Logo einer Marke mit den in der audiovisuellen Werbung verwendeten Farben verglichen.Dabei wird untersucht, ob die Farbauswahl in der Werbung aufgrund des Logos der Marke oder aufgrund der Auswirkungen der Farben auf die Psyche der Menschen ausgewählt wurde.}}, author = {{Felicia, Nidia}}, keywords = {{Bierprodukte, Farben, Getränkeprodukte, Werbung}}, pages = {{76}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Die Wirkung der Farbauswahl in der audiovisuellen Werbung von Getränkeprodukten}}}, year = {{2017}}, } @misc{9018, author = {{Zümre, Tülin }}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Welches Kühl- und Heizsystem ist am wirtschaftlichsten und behaglichsten? - Die Kühldecke und Betonkernaktivierung im Vergleich am Beispiel eines Projektes}}}, year = {{2017}}, } @misc{9019, author = {{Brehm , Tobias}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Entwicklung und thermodynamische Untersuchung einer Fassadenpufferzone als strategische Komponente des klimaneutralen Gebäudebestands}}}, year = {{2017}}, } @misc{9020, author = {{Bidmeshski, Bahman}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Machine learning methods in building control - Investigation for improving energy efficiency and comfort}}}, year = {{2017}}, } @misc{9021, author = {{Hödt, Ivonne}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Atrium eines Krankenhauses in Berlin - Komfortstudie und Energetische Optimierung}}}, year = {{2017}}, } @misc{9091, author = {{Orschulik, Sara}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Barrierefreiheit in der Wohnumgebung – Wärme, Licht und Akustik im Kontext des Alters}}}, year = {{2017}}, } @misc{9092, author = {{Becker, Philipp}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Nachhaltige Fassadensanierung – Studie zur grauen Energie und bauherrenrelevanter Lebenszykluskosten von Fassadensanierungskonzepten}}}, year = {{2017}}, } @book{9108, author = {{Pohl, Burkhard and Ehret, Marietta}}, isbn = {{978-3-945059-41-8}}, pages = {{166}}, publisher = {{e-enterprise}}, title = {{{Lemgos grüne Seite}}}, year = {{2017}}, } @misc{9115, author = {{Manin, Jurij I.}}, isbn = {{978-3-945059-33-3}}, pages = {{219}}, publisher = {{e-enterprise}}, title = {{{Mathematik und Physik : ausgewählte Essays }}}, volume = {{2}}, year = {{2017}}, } @misc{9116, author = {{Cohen, Paul and Yamanishi, Yuuichirou}}, isbn = {{978-3-945059-38-8}}, pages = {{140}}, publisher = {{e-enterprise}}, title = {{{Wie ich "Forcing" entdeckte}}}, volume = {{7}}, year = {{2017}}, } @inproceedings{1934, abstract = {{The Old Belgrade Fairground, a great example of the Early Modernism in Belgrade, underlined the modernization and Europeanization of the capital city of the Kingdom of Yugoslavia. The Fairground's construction in 1937 on the bare terrain of today's New Belgrade was the first step of urbanisation of Belgrade on the left bank of the Sava river and was followed by the construction of the modern city after WWII. During the 80 years long history, the purpose of the Old Belgrade Fairground has been changed several times creating multilayered identity of the urban complex. The Modern exhibition space of the inter-war period was transformed into the infamous concentration camp during WWII. Structures that survived the bombings were re-used as a habitat for youth brigades that participated in the construction of New Belgrade, while its previous purposes were suppressed. During the rebuilding of the city in the post-war period, the Old Belgrade Fairground was ignored. As forgotten place of memory it was partly adapted by artists into ateliers and partly became shelter for poor people. Despite its multileveled historical, cultural and architectural significance, the Old Belgrade Fairground today is neglected. Although a pioneer of Modern Movement in Belgrade, and at the same time an important memorial place, it is today a ruined structure that is decaying. Its multiple histories and "too much identity" created absence of any planned activity in order not to make a wrong one. After its ability to absorb different functions and adapt to huge transformations, its resilience is being contested by disability to balance the complex history. The paper investigates on the transformations and presents a concept of "dissonant heritage" as an instrument for renewal of the Old Belgrade Fairground that needs to use all of its complexity in order to truly recover from the past.}}, author = {{Dragutinovic, Anica and Pottgiesser, Uta and Melenhorst, Michael}}, editor = {{Melenhorst, Michel and Pottgiesser, Uta and Naumann, Christine and Kellner, Theresa}}, keywords = {{Old Belgrade Fairground, Modern Structure, Multilayered Identity, Resilience, Dissonant Heritage}}, location = {{Detmold}}, pages = {{9}}, title = {{{Contested Resilience of a Modern Structure or “Dissonant Heritage”: Multilayered Identity of the Old Belgrade Fairground}}}, doi = {{10.25644/2412-8d28}}, year = {{2017}}, } @article{2012, abstract = {{The rapid growth of optical imaging technologies increased the access and collection of data, which boosts the demand of data and knowledge discovery. This is a fast growing topic in several industry and research areas. Nowadays, a large number of images and signals must be analysed in order to gain and learn proper knowledge. Detecting images with similar contents without specifying an image, recently attracts the researches in image processing domain. Motif discovery in image processing aims to tackle the problem of deriving structures or detecting regularities in image databases. Most of the motif discovery methods solve this problem by converting images into one dimensional time series in a pre-processing step and then applying a motif discovery on these one dimensional time series for image motifs detection. Nevertheless, this conversion might lead to information loss and also the problem of inability to discover shifted and multi-scale image motifs of different size. Contrary to other approaches, here, a method is proposed to find image motifs of different size in image data sets by employing images in original dimension (2D) without converting them to one dimensional time series. The proposed approach consists of three steps: Mapping or transformation, feature extraction and measuring similarities. First, images are inspected by the Complex Quad Tree Wavelet Packet transform, which provides broad frequency analysis of an image in various scales. Next, statistical features are extracted from the wavelet coefficients. Finally, image motifs are detected by measuring the similarity of the features applying various similarity measures. Here, the performance of six similarity measures are benchmarked in details. Moreover, the efficiency of the proposed method is demonstrated on a data set with images from diverse applications such as hand gesture, text recognition, leaf and plant identification, etc. Additionally, the robustness of this method is examined with the image data overlaying with distortions such as noise and blur.}}, author = {{Deppe, Sahar and Lohweg, Volker}}, issn = {{1942-2679}}, journal = {{International Journal On Advances in Intelligent Systems}}, keywords = {{processing, Wavelet transformation.}}, number = {{3/4}}, pages = {{434 -- 446}}, publisher = {{IARIA Journals}}, title = {{{Evaluation of Similarity Measures for Shift-Invariant Image Motif Discovery}}}, volume = {{10}}, year = {{2017}}, } @article{2014, abstract = {{Industrial applications are in transition towards modular and flexible architectures that are capable of self-configuration and -optimisation. This is due to the demand of mass customisation and the increasing complexity of industrial systems. The conversion to modular systems is related to challenges in all disciplines. Consequently, diverse tasks such as information processing, extensive networking, or system monitoring using sensor and information fusion systems need to be reconsidered. The focus of this contribution is on distributed sensor and information fusion systems for system monitoring, which must reflect the increasing flexibility of fusion systems. This contribution thus proposes an approach, which relies on a network of self-descriptive intelligent sensor nodes, for the automatic design and update of sensor and information fusion systems. This article encompasses the fusion system configuration and adaptation as well as communication aspects. Manual interaction with the flexibly changing system is reduced to a minimum.}}, author = {{Fritze, Alexander and Mönks, Uwe and Holst, Christoph-Alexander and Lohweg, Volker}}, issn = {{1424-8220}}, journal = {{Sensors}}, keywords = {{information fusion, intelligent sensor, knowledge-based system, self-configuration, sensor fusion}}, number = {{3}}, title = {{{An Approach to Automated Fusion System Design and Adaptation}}}, doi = {{ https://doi.org/10.3390/s17030601}}, volume = {{17}}, year = {{2017}}, } @inproceedings{2015, abstract = {{ In real-world scenarios it is not always possible to generate an appropriate number of measured objects for machine learning tasks. At the learning stage, for small/incomplete datasets it is nonetheless often possible to get high accuracies for several arbitrarily chosen classifiers. The fact is that many classifiers might perform accurately, but decision boundaries might be inadequate. In this situation, the decision supported by marginlike characteristics for the discrimination of classes might be taken into account. Accuracy as an exclusive measure is often not sufficient. To contribute to the solution of this problem, we present a margin-based approach originated from an existing refinement procedure. In our method, margin value is considered as optimisation criterion for the refinement of SVM models. The performance of the approach is evaluated on a real-world application dataset for Motor Drive Diagnosis coming from the field of intelligent autonomous systems in the context of I ndustry 4.0 paradigm as well as on several UCI Repository samples with different numbers of features and objects.}}, author = {{Dörksen, Helene and Lohweg, Volker}}, booktitle = {{Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods}}, isbn = {{9789897582226}}, keywords = {{Refinement of Classification, Robust Classification, Classification within Small/Incomplete Samples}}, location = {{Porto, Protugal}}, pages = {{293--300}}, publisher = {{SCITEPRESS - Science and Technology Publications, Lda.}}, title = {{{Margin-based Refinement for Support-Vector-Machine Classification}}}, doi = {{10.5220/0006115502930300}}, year = {{2017}}, } @inproceedings{2018, abstract = {{Applying information fusion systems aims at gaining information of higher quality and simultaneously decreasing computational and communicational efforts. An increased availability of sensors in industrial machines, but also in everyday life, results in large amounts of potential features. Each feature entails computational and communicational costs. An information fusion system may not require all features, supported by the available sensors, to fulfil its purpose. Feature selection methods reduce the amount of features with the aim to maintain or even increase performance. This contribution proposes a feature selection approach exploiting the inherent conflict between features and utilising a state-ofthe-art information fusion operator. The performance of the proposed method is evaluated in the scope of a publicly available data set and benchmarked against an established feature selection method. It is shown that the proposed approach is faster and produces more accurate feature subsets containing very few features, although the established method produces slightly better performing subsets for large feature subsets.}}, author = {{Holst, Christoph-Alexander and Mönks, Uwe and Lohweg, Volker}}, location = {{Dortmund}}, pages = {{279--295}}, publisher = {{27. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)}}, title = {{{Conflict-based Feature Selection for Information Fusion Systems}}}, doi = {{10.5445/KSP/1000074341}}, year = {{2017}}, } @inproceedings{2019, author = {{Dörksen, Helene and Lohweg, Volker}}, booktitle = {{4th European Conference on Data Analysis 2017 (ECDA 2017) }}, location = {{Wroclaw, Poland}}, title = {{{Margin-based Refinement for Linear Discriminant Analysis}}}, year = {{2017}}, } @inproceedings{2021, abstract = {{Sensor- und Informationsfusion spielt in heutigen Fertigungsanlagen als Enabler-Technologie eine entscheidende Rolle. Dabei ist es entscheidend, dass die Sensoren ein gewisse Autonomie im Rahmen ihrer Messaufgabe besitzen. Der Vortrag zielt darauf ab, einen Ansatz zur Informationsfusion vorzustellen, der darlegt, wie Sensoren sich im Kontext einer Aufgabe selbständig adaptieren und eine Kommunikation mit weiteren Sensoren aufbauen können, um verdichtete Informationen über ein Messobjekt zu generieren.}}, author = {{Lohweg, Volker}}, booktitle = {{Hannover Messe Industrie}}, location = {{Hannover}}, title = {{{Autonome Sensoren - Wie sich die Produktion von morgen verändert wird, Forum Industrial Automation}}}, doi = {{10.13140/RG.2.2.32546.63683 }}, year = {{2017}}, } @inproceedings{2022, abstract = {{Nowadays, the boost of optical imaging technologies results in more data with a faster rate are being collected. Consequently, data and knowledge discovery science has become an attractive and a fast growing topic in several industry and research area. Motif discovery in image processing aims to tackle the problem of deriving structures or detecting regularities in image databases. Most of the motif discovery methods first convert images into time series and then attempt to find motifs in such data. This might lead to information loss and also the problem of inability to detect shifted and multi-scale image motifs of different size. Here, a method is proposed to find image motifs of different size in image datasets by applying images in original dimension without converting them to time series. Images are inspected by the Complex Quad Tree Wavelet Packet transform which provides broad frequency analysis of an image in various scales. Next, features are extracted from the wavelet coefficients. Finally, image motifs are detected by measuring the similarity of the features. The performance of the proposed method is demonstrated on a dataset with images from diverse applications, such as hand gesture, text recognition, leaf and plant identification, etc. }}, author = {{Deppe, Sahar and Lohweg, Volker}}, booktitle = {{PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications}}, editor = {{Leister, Wolfgang}}, issn = {{2308-3700}}, keywords = {{Motif discovery, Image processing, Wavelet transformation}}, location = {{Venice, Italy }}, pages = {{27--32}}, publisher = {{The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing}}, title = {{{Shift-Invariant Motif Discovery in Image Processing 'Best Paper Award'}}}, year = {{2017}}, } @article{2023, abstract = {{Last decades witness a huge growth in medical applications, genetic analysis,and in performance of manufacturing technologies and automatised productionsystems. A challenging task is to identify and diagnose the behavior of suchsystems, which aim to produce a product with desired quality. In order to con-trol the state of the systems, various information is gathered from differenttypes of sensors (optical, acoustic, chemical, electric, and thermal). Time seriesdata are a set of real-valued variables obtained chronologically. Data miningand machine learning help derive meaningful knowledge from time series.Such tasks include clustering, classification, anomaly detection andmotif discov-ery. Motif discovery attempts tofind meaningful, new, and unknown knowledgefrom data. Detection of motifs in a time series is beneficial for, e.g., discovery ofrules or specific events in a signal. Motifs provide useful information for theuser in order to model or analyze the data. Motif discovery is applied to variousareas as telecommunication, medicine, web, motion-capture, and sensornetworks. This contribution provides a review of the existing publications intime series motif discovery along with advantages and disadvantages of existingapproaches. Moreover, the research issues and missing points in thisfield arehighlighted. The main objective of this focus article is to serve as a glossary forresearchers in thisfield.}}, author = {{Deppe, Sahar and Lohweg, Volker}}, issn = {{2573-9468 }}, journal = {{ WIREs : Forensic science}}, number = {{2}}, publisher = {{Wiley-Blackwell }}, title = {{{Survey on Time Series Motif Discovery}}}, doi = {{ https://doi.org/10.1002/widm.1199}}, volume = {{7}}, year = {{2017}}, } @article{2266, author = {{Tebbe, Eva and von Blanckenburg, Korbinian}}, issn = {{0169-5150}}, journal = {{Agricultural Economics}}, number = {{1}}, pages = {{41--53}}, publisher = {{Wiley-Blackwell }}, title = {{{Does willingness to pay increase with the number and strictness of sustainability labels?}}}, doi = {{10.1111/agec.12394}}, volume = {{49}}, year = {{2017}}, } @article{2277, author = {{Klodt, Henning and Greß, Stefan and von Blanckenburg, Korbinian and Paqué, Karl-Heinz}}, issn = {{0043-6275}}, journal = {{Wirtschaftsdienst}}, pages = {{532--534}}, title = {{{Kurz kommentiert}}}, doi = {{10.1007/s10273-017-2174-6}}, year = {{2017}}, } @article{2351, author = {{Deffner, Bernd and Jimaja, Sètuhn and Kröger-Brinkmann, Anja and Schlüter, A. Dieter}}, issn = {{1022-1352}}, journal = {{Macromolecular Chemistry and Physics}}, title = {{{Tensile Behavior of a Substituted Poly(m-,p-phenylene) versus Its Parent Counterpart and Synthesis of Related Polyarylenes}}}, doi = {{10.1002/macp.201600561}}, year = {{2017}}, } @inbook{261, abstract = {{Learning retention is improved when in addition to the learning methods of “classical” instruction (auditory, visual), further learning channels (discussing, doing) are addressed. In view of this, the coursework for the degree in Industrial Engineering has been designed to include teaching formats with a high level of interaction among students. In keeping with this teaching approach, an additional business game was developed for the Production Systems module. This game provides knowledge about the structure of the logistical workflow within production in general and the Kanban method in particular. The first step in designing the game was to define learning objectives. Based on these, a basic concept was derived. This basic concept applies the guideline for the introduction of Kanban by Geiger et al. (2011). The detailed concept was then worked out over the course of further development, leading to the design of an assembly line for Lego cars as well as the design of tasks on the subject of Kanban capability and for calculating the number of Kanban. The business game illustrates, inter alia, the difference between the Kanban method and a conventional production planning and control system. The simulation has been tested in a university course, evaluated and, in response to the positive feedback from students, integrated in the course instruction. The conclusion of the paper provides an outlook on the further development of instruction in the context of the digitization and networking of production.}}, author = {{Brown, David and Hinrichsen, Sven and Paris, Melissa}}, booktitle = {{Advances in Ergonomic Design of Systems, Products and Processes}}, editor = {{Schlick, Christopher Marc and Duckwitz , Sönke and Flemisch , Frank and Frenz, Martin and Kuz, Sinem and Mertens, Alexander and Mütze-Niewöhner, Susanne}}, isbn = {{978-3-662-53304-8}}, location = {{Aachen}}, pages = {{103--114}}, publisher = {{Spinger}}, title = {{{Development of a Business Game for Teaching the Kanban Method}}}, doi = {{10.1007/978-3-662-53305-5}}, year = {{2017}}, } @inproceedings{262, abstract = {{Die Anforderungen an die Gestaltung von Montagesystemen verändern sich. Dazu tragen sich verkürzende Innovations- und Produktlebenszyklen sowie eine zunehmende Variantenvielfalt bei, mit der eine Montage von kleinen Losen bis hin zur kundenindividuellen Montage einhergeht. Den aktuellen Anforderungen an Montagesysteme steht die Weiterentwicklung der technologischen Möglichkeiten zur Gestaltung von manuellen und hybriden Montagesystemen gegenüber. Die große Anzahl der am Markt verfügbaren Assistenzsysteme für die Montage erschwert den Prozess der Auswahl und Konfiguration eines anforderungsgerechten Assistenzsystems. Daher zielt der vorliegende Beitrag darauf ab, aufbauend auf begrifflichen Grundlagen eine Klassifikation der Montageassistenzsysteme vorzunehmen und damit den Auswahlprozess zu unterstützen.}}, author = {{Hinrichsen, Sven and Riediger, Daniel and Unrau, Alexander}}, booktitle = {{Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. }}, isbn = {{978-3-936804-22-5}}, location = {{Brugg-Windisch, Switzerland}}, number = {{30}}, publisher = {{GfA-Press}}, title = {{{Entwicklung und Auswahl von Montageassistenzsystemen}}}, year = {{2017}}, } @article{2620, author = {{Nolte, T. and Hölscher, Maike and Upmann, Matthias and Zapp, Jürgen}}, journal = {{Deutsche Lebensmittel-Rundschau}}, number = {{1}}, pages = {{17--21}}, title = {{{Fehlaromen in der Ebermast. Ebergeruchsanalytik im Vergleich}}}, volume = {{113}}, year = {{2017}}, } @inproceedings{2621, author = {{Upmann, Matthias}}, location = {{Schwelentrup}}, title = {{{Schnitzel & Co - Auslaufmodelle der Ernährung?}}}, year = {{2017}}, } @inproceedings{2622, author = {{Upmann, Matthias and Lautenschläger, Ralf}}, location = {{Düsseldorf}}, title = {{{Fleisch vom Bruderhahn - einsetzbar und zielführend für hochwertige Fleischerzeugnisse?}}}, year = {{2017}}, } @inproceedings{2623, author = {{Nolte, T. and Hölscher, Maike and Upmann, Matthias and Zapp, Jürgen}}, location = {{Bad Salzuflen}}, title = {{{Detektion von Ebergeruchsstoffen - analytisch chemische Aspekte}}}, year = {{2017}}, } @inproceedings{2624, author = {{Hölscher, Maike and Nolte, T. and Zapp, Jürgen and Stiebing, Achim and Lautenschläger, Ralf and Upmann, Matthias}}, location = {{ Bad Salzuflen}}, title = {{{Verarbeitung von Eberfleisch - Möglichkeiten und Grenzen}}}, year = {{2017}}, } @article{2625, author = {{Weyland, Gerd and Upmann, Matthias}}, issn = {{0015-363x}}, journal = {{Fleischwirtschaft}}, number = {{7}}, pages = {{60--64}}, title = {{{Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost}}}, volume = {{97}}, year = {{2017}}, } @article{2626, author = {{Weyland, Gerd and Upmann, Matthias}}, issn = {{0015-363x}}, journal = {{Fleischwirtschaft}}, number = {{8}}, pages = {{44--50}}, title = {{{Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost}}}, volume = {{97}}, year = {{2017}}, } @inproceedings{2627, author = {{Fencher, T. and Upmann, Matthias}}, location = {{Garmisch-Partenkirchen}}, title = {{{Digitale Knochenpartikelanalyse}}}, year = {{2017}}, } @inproceedings{2628, author = {{Fencher, T. and Röser, Anja and Upmann, Matthias}}, location = {{Garmisch-Partenkirchen}}, title = {{{Histologische Knochenpartikelfärbungen im Vergleich – Genauigkeit von Alizarin, Kossa und Co. }}}, year = {{2017}}, } @inproceedings{2629, author = {{Upmann, Matthias and Langen, M.}}, location = {{Berlin}}, title = {{{Separation von Fleischstandards. Anforderungen an Ausgangsmaterial, Prozesse und Produkte}}}, year = {{2017}}, } @article{263, author = {{Hinrichsen, Sven and Riediger, Daniel and Unrau, Daniel}}, journal = {{REFA Blog - Informations- und Kommunikationsmedium von REFA}}, title = {{{Anforderungsgerechte Gestaltung von Montageassistenzsystemen}}}, year = {{2017}}, } @article{2631, author = {{Lautenschläger, Ralf and Upmann, Matthias}}, journal = {{Animal Frontiers}}, pages = {{2--4}}, title = {{{How meat is defined in the European Union and in Germany}}}, volume = {{1}}, year = {{2017}}, } @inproceedings{2633, author = {{Upmann, Matthias}}, location = {{Bochum}}, title = {{{Verarbeitung von Eberfleisch. Auswirkungen auf die Qualität von Fleischprodukten}}}, year = {{2017}}, } @inproceedings{2635, author = {{Upmann, Matthias}}, location = {{ Neuchâtel }}, title = {{{Muscle cell integrity – crucial for meat product quality?}}}, year = {{2017}}, } @inproceedings{2638, author = {{Upmann, Matthias and Lautenschläger, Ralf}}, location = {{Lemgo}}, title = {{{Qualitätsprodukte aus dem Fleisch von Bruderhähnen - Realität oder Fiktion?}}}, year = {{2017}}, } @inproceedings{265, abstract = {{The maintenance of a tool for injection molding or forming is usually accompanied by its disassembly and assembly. The duration of the assembly activities is often a large part of the total activity time for the maintenance of the tool. The degree of performance of the employees in the execution of these disassembly and assembly activities is often low. In addition, allowances occur (e.g. searching for work equipment). At the Industrial Engineering Lab of the Ostwestfalen-Lippe University of Applied Sciences, a prototype of an assistance system was developed to support the assembly activities in toolmaking. With the help of this system, the operator is guided step by step through the assembly process. The economic potential of the system exists in the reduction of training times, the avoidance of assembly errors and the increase of labor productivity.}}, author = {{Hinrichsen, Sven and Riediger, Daniel and Unrau, Alexander}}, booktitle = {{2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)}}, isbn = {{978-1-5386-0948-4 }}, keywords = {{injection moulding, machine tools, maintenance engineering, productivity, projection-based assistance system, injection molding tools, assembly activities, assembly process, assembly errors, tool maintenance, disassembly activities, economic potential, Industrial Engineering Lab, Ostwestfalen-Lippe University of Applied Sciences, toolmaking, Tools, Injection molding, Maintenance engineering, Usability, Task analysis, Workstations, Morphology, assembly assistance systems, assistance systems, maintenance of injection molding tools, manual assembly}}, location = {{Singapore}}, number = {{1}}, pages = {{1571--1575}}, title = {{{Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools}}}, doi = {{https://doi.org/10.1109/IEEM.2017.8290157}}, year = {{2017}}, } @inproceedings{267, abstract = {{Sich verkürzende Innovations- und Produktlebenszyklen sowie eine zunehmende Variantenvielfalt verbunden mit kleineren Losgrößen bis hin zur kundenindividuellen Produktkonfiguration führen zu veränderten Anforderungen an die Gestaltung von Montagesystemen. Gleichzeitig bieten technologische Entwicklungen auf dem Gebiet der Assistenzsysteme neue Gestaltungsmöglichkeiten, Beschäftigte bei der Ausführung ihrer Arbeitsprozesse zu unterstützten. Der vorliegende Beitrag zeigt anhand eines Fallbeispiels, eines Montagearbeitsplatzes aus der SmartFactoryOWL in Lemgo, wie ein Montagearbeitsplatz über Assistenzfunktionen weiter entwickelt wurde und welche Auswirkungen diese Entwicklungen auf die Arbeit haben. Der Arbeitsplatz wurde im Rahmen eines Kooperationsprojektes des Labors für Industrial Engineering der Hochschule Ostwestfalen-Lippe und der Unternehmen Turck und Brandt Kantentechnik in der SmartFactory-OWL realisiert. Er verfügt über ein Assistenzsystem, welches dem Monteur auftrags- und arbeitsschrittbezogene Informationen bereitstellt. Das System besteht maßgeblich aus einem Pick-to-light System verbunden mit einem Touchscreen zur Visualisierung der Informationen. Der Montageauftrag wird über eine RFID-Applikation angemeldet. Damit lassen sich neue Produktvarianten flexibel hinzufügen und bestehende ändern. Zudem können die über Sensoren erfassten Daten zu Kennzahlen aggregiert und entsprechend der Anforderungen der Nutzer visualisiert werden. Im Rahmen des Beitrages werden die Auswirkungen dieser technologischen Weiterentwicklungen auf die Arbeit erörtert.}}, author = {{Kleineberg, Tim and Hinrichsen, Sven and Niggemann, Oliver}}, booktitle = {{Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V.}}, isbn = {{978-3-936804-22-5}}, location = {{Brugg-Windisch}}, number = {{30}}, publisher = {{GfA-Press}}, title = {{{Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage}}}, year = {{2017}}, } @book{2682, author = {{Ernesti, Werner and Holch, Heinrich and Kattenbusch, Markus and Keren, Franz and Klein, Hilmar and Kuhlenkamp, Dieter and Kuhne, Volker and Neuenhagen, Helmhard and Noosten, Dirk and Ohland, Edgar and Stiglocher, Hans and Kugelmann, Adolf}}, isbn = {{978-3-481-03247-0}}, pages = {{556}}, publisher = {{Müller}}, title = {{{Plümecke – Preisermittlung für Bauarbeiten}}}, year = {{2017}}, } @inproceedings{6475, author = {{Song, Jian}}, location = {{Fürth, Universität Erlangen}}, title = {{{Kunststofftechnik, Tribologie und elektrische Verbindungstechnik}}}, year = {{2017}}, } @article{6751, author = {{von Blanckenburg, Korbinian}}, issn = {{0043-6275 }}, journal = {{Wirtschaftsdienst}}, number = {{8}}, pages = {{533--534}}, publisher = {{ZBW}}, title = {{{Auto-Kartell: Ein schmaler Grat}}}, volume = {{97}}, year = {{2017}}, } @inproceedings{682, abstract = {{Well-designed interactive visualizations help users gaining insights into an organization's data and, finally, making decisions. In the Business Intelligence (BI) context, the most popular visualization approach is dashboards, which combine multiple visual components, such as charts, on a single view. Well-founded decisions require the collaboration of several analysts, such as domain experts, line-of-business managers, or key suppliers. For face-to-face collaboration settings, multi-display environments and smart meeting rooms have improved. In the BI context, support for boardrooms is being discussed for this setting. In this paper, we propose annotation dashboards, based on a multitouch and multiuser interaction approach, which are integrated in a multi-display environment constituting a BI digital boardroom. In addition, means of semantic navigation help business users to easily get insights into business context information.}}, author = {{Rubart, Jessica and Lietzau, Benjamin and Soehlke, Patrick and Alex, Bastian and Becker, Stephan and Wienboeker, Tim}}, booktitle = {{2017 IEEE 11th International Conference on Semantic Computing (ICSC)}}, isbn = {{978-1-5090-4285-2 }}, keywords = {{Semantics, Data visualization, Navigation, Collaboration, Context, Business intelligence, Digital Boardroom, Multitouch and Multiuser Interaction}}, location = {{San Diego, CA, USA}}, publisher = {{IEEE}}, title = {{{Semantic Navigation and Discussion in a Digital Boardroom}}}, doi = {{10.1109/icsc.2017.39}}, year = {{2017}}, } @article{6854, author = {{von Blanckenburg, Korbinian and Knost, E.}}, issn = {{2629-1002 }}, journal = {{TeachingXchange}}, number = {{Vol.2}}, publisher = {{wbv}}, title = {{{Einsatz von eTutorien als komplementäre Lehr- und Lernform}}}, year = {{2017}}, } @book{6855, author = {{von Blanckenburg, Korbinian}}, isbn = {{978-3-8006-5491-8}}, pages = {{XV, 119 Seiten }}, publisher = {{Vahlen}}, title = {{{Mathematik in der BWL : anwendungsorientiert und verständlich}}}, year = {{2017}}, } @misc{7224, author = {{Nordhoff, Daniel and Thomsen, Arne}}, booktitle = {{Lippische Mitteilungen}}, issn = {{0342-0876}}, pages = {{203--217}}, publisher = {{Verlag für Regionalgeschichte}}, title = {{{"Sterben und steuern - müssen wir alle" - Entwicklung der Einkommensteuer im Fürstentum Lippe}}}, volume = {{86}}, year = {{2017}}, } @misc{7489, author = {{Karthikeyan, Gajarsi}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Public Key Infrastructures and Validation Services for OPC UA based Applications}}}, year = {{2017}}, } @misc{7490, author = {{Jerome, Manuel Anto}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Evaluation of TLS Handshake Performance with Respect to different Cipher Suites and Browser Implementations}}}, year = {{2017}}, } @misc{7491, author = {{Pothumanchi, Avinash}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Evaluation of Role Base Access Controles using Attribute Certificates and ist emploayment to OPC-UA based Applications}}}, year = {{2017}}, } @misc{7492, author = {{Schmidtpeter, Philip}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Erstellung einer Smart-Home Steuerung, basierend auf einem Raspberry Pi 3, mit Zugriff via Android Applikation}}}, year = {{2017}}, } @misc{7493, author = {{Teichrib, Erich}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Einsatz von Trusted Boot für industrielle Steuerungen zur Verifikation des sicheren Systemszustands mittels Remote Attestation}}}, year = {{2017}}, } @misc{7495, author = {{Stöhr, Simon}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Machbarkeitsstudie eines Intrusion Detection Systems für Profinet-basierte Netzwerke der Automatisierungstechnik}}}, year = {{2017}}, } @misc{7562, author = {{Köhler, Martin and Lorenzl, Holger}}, booktitle = {{Straße und Autobahn}}, number = {{10}}, pages = {{767--774}}, publisher = {{Kirschbaum Verlag}}, title = {{{Bauliche Erhaltung von Verkehrsflächen mit Pflasterdecken und Plattenbelägen}}}, year = {{2017}}, } @inbook{7575, author = {{Schmohl, Tobias}}, booktitle = {{Kulturelle Bildung - Bildende Kultur: Schnittmengen von Bildung, Architektur und Kunst}}, editor = {{Weiß, Gabriele}}, isbn = {{978-3-8394-3731-5}}, pages = {{101--114}}, publisher = {{transcript}}, title = {{{Rhetorik – Bildung – Kultur: Ein Vorschlag zur grundlagentheoretischen Verortung}}}, doi = {{10.1515/9783839437315-007}}, year = {{2017}}, } @misc{7591, author = {{Schmohl, Tobias}}, booktitle = {{New Perspectives in Science Education}}, pages = {{551--555}}, title = {{{The role of abduction as an inferential process and means of knowledge creation in Design Research}}}, volume = {{6}}, year = {{2017}}, } @misc{7592, author = {{Schmohl, Tobias}}, booktitle = {{The Future of Education}}, isbn = {{ ‎ 978-8862928687}}, keywords = {{Scholarship of Academic Development, Scholarship of Teaching and Learning}}, location = {{Florenz}}, pages = {{317--321}}, publisher = {{Libreriauniversitaria.it}}, title = {{{The research—education nexus: Basic premises and practical application of the "Scholarship" movement}}}, volume = {{7}}, year = {{2017}}, } @book{7607, author = {{Hofmann, Martin Ludwig}}, isbn = {{9783846762868}}, pages = {{186}}, publisher = {{Wilhelm Fink Verlag}}, title = {{{Human Centered Design. Innovationen entwickeln, statt Trends zu folgen,}}}, year = {{2017}}, } @misc{7643, author = {{Köhler, Martin}}, booktitle = {{Gesteinstagung 2017 der Forschungsgesellschaft für Straßen- und Verkehrswesen am 22./23. November 2017 in Aschaffenburg}}, publisher = {{FGSV-Verlag}}, title = {{{Neuerungen bei den Bauweisen für Pflasterdecken}}}, year = {{2017}}, } @techreport{7652, author = {{Hofmann, Martin Ludwig}}, booktitle = {{https://www.communication-director.com}}, title = {{{Building bridges. How public relations helps communities leap over cultural walls}}}, year = {{2017}}, } @misc{7656, author = {{Hofmann, Martin Ludwig}}, booktitle = {{werkbund akademiereihe}}, pages = {{152 -- 163}}, publisher = {{Deutscher Werkbund NRW}}, title = {{{Konstruktionen der Nähe und Ferne. Dialektische Betrachtungen zwischen Heidegger und Adorno}}}, year = {{2017}}, } @misc{771, author = {{Runge, Thorsten}}, keywords = {{Musikproduktion}}, pages = {{46}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Anwendungsorientierte Audiotechnik : Technisch-künstlerischer Ablauf einer Liveaufnahme anhand der Band Nihiling}}}, year = {{2017}}, } @misc{7711, author = {{Köhler, Martin}}, booktitle = {{8. Detmolder Verkehrstag am 22.06.2017 zum Thema "Kommunaler Straßenbau / kommunale Straßenerhaltung"}}, location = {{Detmold}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Bauliche Erhaltung von Pflasterdecken und Plattenbelägen}}}, year = {{2017}}, } @misc{773, author = {{Kurz-Pacillo, Lidia}}, keywords = {{Angsterzeugung, Horrorfilm, Vergleich}}, pages = {{89}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Vergleich von Horrorfilmen der 60er/70er Jahre und der heutigen Zeit hinsichtlich der Mittel zur Angsterzeugung}}}, year = {{2017}}, } @misc{775, author = {{Georg, Jens Kevin}}, keywords = {{Kamera, Szenenbild}}, pages = {{96}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Das visuelle Erzählen fiktiver Filmfiguren (Lasse, oder wie man in einer Welt voller visueller Stilmittel endlich eine Filmfigur wird)}}}, year = {{2017}}, } @misc{777, abstract = {{Die Arbeit befasst sich mit der historischen Entwicklung vom Matte Shots, den gegenwärtigen Verfahren und den möglichen zukünftigen Methoden. Matte Shots waren und sind einer der wichtigsten Bereich in der Filmproduktion, um Darsteller oder Objekte vor einem beliebigen Hintergrund erscheinen zu lassen. Aktuelle technische Entwicklungen deuten auf eine mögliche Veränderung der Verfahren hin, die momentan als Standard gelten. Ziel der Arbeit ist eine Analyse der Entwicklung von Matte Shots, um eine Prognose für deren Zukunft geben zu können. Dabei wird die Hypothese behandelt, ob Matte Shots in Zukunft keine Verwendung mehr finden werden.}}, author = {{Brand, Ole}}, keywords = {{matte}}, pages = {{102}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Bildkomposition mit Matte Shots : Gestern, Heute, Morgen}}}, year = {{2017}}, } @misc{779, author = {{Tautges, Lena}}, keywords = {{Filmmontage}}, pages = {{167}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{FILMMONTAGE : Geschichte, Theorie, Anwendung mit Praxisbeispiel}}}, year = {{2017}}, } @misc{781, author = {{Wistinghausen, Carolin}}, keywords = {{Social-Media-Plattform Twitch}}, pages = {{143}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Konzeption und Gestaltung von Corporate Design für Kanäle auf der Social-Media-Plattform Twitch}}}, year = {{2017}}, } @inproceedings{5574, author = {{Rossmann, Sören and Wolff, V. and Müller, Ulrich and Schneider, Jan}}, location = {{Bruchsal}}, title = {{{Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen}}}, year = {{2017}}, } @article{5575, author = {{Rossmann, Sören and Wolff, V. and Müller, Ulrich and Schneider, Jan}}, issn = {{1866-5195}}, journal = {{BrewingScience }}, number = {{1-2}}, pages = {{31--38}}, publisher = {{Carl}}, title = {{{Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions}}}, volume = {{70}}, year = {{2017}}, } @article{5576, author = {{Broeker, Timo and Hoffarth, Marc and Oppermann, L. and Wolff, V. and Neubauer, Pia Rebecca and Schneider, Jan}}, journal = {{BrewingScience}}, number = {{3-4}}, pages = {{74--84}}, title = {{{Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor}}}, volume = {{70}}, year = {{2017}}, } @inproceedings{5578, author = {{Rossmann, Sören and Wolff, V. and Müller, Ulrich and Schneider, Jan}}, location = {{ Ljubljan (Slovenia}}, title = {{{Comparative study of accelerated shelf-life tests on physical ageing of beverages containing weighted flavor emulsions}}}, year = {{2017}}, } @inproceedings{5579, author = {{Schneider, Jan and Hoffarth, Marc and Broeker, Timo}}, location = {{Ljubljana (Slovenia)}}, title = {{{Wet oxidation of spent grains from breweries for the production of fermentable sugars}}}, year = {{2017}}, } @inproceedings{5580, author = {{Broeker, Timo and Hoffarth, Marc and Heikrodt, Klaus and Schneider, Jan}}, location = {{Ljubljana (Slovenia)}}, title = {{{Study on the implementation of a biocatalytic power-to-gas reactor in a brewery}}}, year = {{2017}}, } @inproceedings{5581, author = {{Conradi, Florian and Wefing, Patrick}}, location = {{Lemgo}}, title = {{{Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik}}}, year = {{2017}}, } @inproceedings{5582, author = {{Hoffarth, Marc}}, location = {{Lemgo}}, title = {{{Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen}}}, year = {{2017}}, } @inproceedings{5583, author = {{Broeker, Timo}}, location = {{Lemgo}}, title = {{{Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas}}}, year = {{2017}}, } @inproceedings{5584, author = {{Broeker, Timo}}, location = {{Gelsenkirchen}}, title = {{{bioCONNECT - Wasserstoff und biogenes CO2 im Verbund}}}, year = {{2017}}, } @inproceedings{5585, author = {{Broeker, Timo and Hoffarth, Marc and Heikrodt, Klaus and Schneider, Jan}}, location = {{Barcelona/Katalonia}}, title = {{{Study on the implementation of a biocatalytic power-to-gas reactor in a brewery}}}, year = {{2017}}, } @inproceedings{5677, author = {{Minge, Michael and Ivanova, Ekaterina and Lorenz, Katharina and Thüring, Manfred and Krüger, Jörg and Joost, Gesche}}, pages = {{870--875}}, title = {{{BeMobil: Developing a User-Friendly and Motivating Telesystem for Motor Rehabilitation after Stroke}}}, year = {{2017}}, } @inproceedings{5678, author = {{Ivanova, Ekaterina and Katharina, Lorenz and Schrader, Mareike and Minge, Michael}}, title = {{{Developing Motivating Visual Feedback for a Haptic Telesystem for Stroke Rehabilitation}}}, year = {{2017}}, } @inproceedings{5679, author = {{Ivanova, Ekaterina and Minge, Michael and Schmidt, Henning and Thüring, Manfred and Krüger, Jörg}}, pages = {{39--43}}, title = {{{ User-Centered Design of a Patient's Work Station for Haptic Robot-based Telerehabilitation after Stroke}}}, year = {{2017}}, } @inproceedings{570, abstract = {{Additive manufacturing (AM) has matured rapidly during the last years due to the advancement of AM machines and materials. Nevertheless, the widespread adoption of AM is still challenged by producing parts with reliable quality. The aim of this paper is t o introduce a first approach to apply in-situ monitoring for quality evaluation of produced parts. Based on the monitored data, a model is developed, in order to predict the quality of ready built parts.}}, author = {{Scheideler, Eva and Huxol, Andrea and Villmer, Franz-Josef}}, booktitle = {{Production Engineeringand Management}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-946856-01-6}}, keywords = {{Nondestructive quality control, Predictive analytics, Metal model, Additive manufacturing}}, location = {{Pordenone, Italy}}, number = {{1}}, pages = {{89--100}}, title = {{{Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models}}}, year = {{2017}}, } @inproceedings{5714, author = {{Nolte, Ferry and Guhr, Nadine and Breitner, M.H.}}, location = {{Hawaii}}, title = {{{Moderation of Enterprise Social Networks - A Literature Review from a Corporate Perspective}}}, year = {{2017}}, } @inproceedings{573, abstract = {{Additive manufacturing (AM) technologies have not only revolutionized product development and design by enabling rapid prototyping. They also gained influence on production in general, mainly because of their direct manufacturing capabilities. In the context of Industry 4.0 and the related process automation, innovative and advanced production technologies with completely new approaches are required [1]. AM technologies contribute to this with their advantages like freedom of design, cost efficient product individualization, and functional integration. On the other hand, AM still shows shortcomings in exploiting its full potential. Most current AM technologies are only applicable for manufacturing with singular materials. In particular, opportunities for processing of optically or electrically conductive materials are still missing. This paper contributes to the advancement of additive manufacturing of two different material variants or even two completely different materials. A special focus is laid on producing a part that combines mechanical with optical or electrical functionalities in one process step. The ultimate goal is to integrate sensor functionalities into an AM object, e.g. strain gauges. Extrusion processes, predominantly Fused Layer Modeling (FLM), are preferred in this research due to their mechanically simple machine setup in which additional functional materials can be adapted easily to the build process. In a first step, the general manufacturability has been evaluated. Thereafter, the resulting optical transmission properties have been analyzed. Especially the attenuation has to remain below a threshold value to accomplish a minimum signal-to-noise ratio.}}, author = {{Ehlert, Patrick and Stübbe, Oliver and Villmer, Franz-Josef}}, booktitle = {{Production Engineering and Management}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-946856-01-6}}, keywords = {{Additive manufacturing, Embedded optical waveguides, Electrical conductors, Embedded systems, FLM technology, Sensors}}, location = {{Pordenone, Italy}}, number = {{1}}, pages = {{127--136}}, title = {{{Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology}}}, year = {{2017}}, } @article{5739, abstract = {{Das Thema Gesundheit wird traditionell eher aus gesundheitswissenschaft- licher und medizinischer Perspektive betrachtet und untersucht. Nun sind es aber Architekten, Stadtplaner und andere planende Disziplinen, die unsere tägliche Lebenswelt formen. Mit dem Ansatz des Human Centered Design, wird diese Verantwortung gewürdigt und Einwirkungen und Auswirkungen der gebauten Umwelt auf den Menschen, auf unsere Gesundheit und auf unser Wohlempfinden aufgezeigt.}}, author = {{Cardinali, Marcel}}, issn = {{2566-8900}}, journal = {{urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung}}, number = {{2}}, pages = {{28--31}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Human Centered Design. Wie Architektur unser Verhalten beeinflusst}}}, year = {{2017}}, } @inproceedings{574, abstract = {{The increasing industrial digitization is the driver for the fast emergence of many industrial smart products. To stay competitive, the manufacturing companies of these smart products need to optimize their internal lifecycleprocesses. Mainly, they have to converge the software and hardware lifecycleprocesses. However, even if this strategic necessity has been recognized, manufacturing companies struggle to develop and implement a roadmap of such convergence.Starting point for the realization of harmonized lifecycle processes are processmodels describing process activities and the underlying data models. This research addresses the latter one and aims to create a generic lifecycle data model. The research team created and evaluated such data model referring to development artifacts such as requirements, parts or test cases and to lifecycle artifacts such as revisions, versions and baselines. The generic lifecycle management model was evaluated by a practical development of a smart product. By this, the research provides a valuable result to maintain and increase the competitiveness of manufacturing companies.}}, author = {{Deuter, Andreas and Otte, Andreas and Ebert, Marcel}}, booktitle = {{Production Engineering and Management}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-946856-01-6}}, keywords = {{PLM, ALM, Systems Engineering, VDI guideline 2206}}, location = {{Pordenone, Italy}}, number = {{1}}, pages = {{115--125}}, title = {{{Extending the Sliced V-Model to Smart Product Development}}}, year = {{2017}}, } @article{5740, abstract = {{Zweitveröffentlichung in urbanlab Magazin Regionale Netzwerke, 12–15.}}, author = {{Hall, Oliver and Cardinali, Marcel}}, journal = {{Ideenbuch Wachstum in Kooperation}}, pages = {{92--95}}, publisher = {{NRW.BANK}}, title = {{{ Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb.}}}, year = {{2017}}, } @article{5741, author = {{Hall, Oliver and Cardinali, Marcel}}, journal = {{urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung}}, keywords = {{Studentischer Ideenwettbewerb}}, number = {{2}}, pages = {{60--63}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Quartier der Zukunft - Wettbewerbsdokumentation}}}, year = {{2017}}, } @article{5742, abstract = {{Der vorliegende Artikel beleuchtet die Bedeutung von sozial heterogenen Quar- tieren zur Verhinderung von Armutsrepdroduktion. In diesem Zusammenhang werden Unterschiede und Gemeinsamkeiten von Sozialraum und Quartiers- raum bei verschiedenen Gruppen herausgestellt. Daraus folgt, dass insbesonde- re Kinder und Jugendliche von einer heterogenen Quartierszusammensetzung profitieren. Die Analyse der Abläufe und Abhängigkeiten der Problemstellungen im Quartier zeigt schließlich, dass die Interventionspunkte des Programms So- ziale Stadt zwar richtig erkannt wurden, aber allein nicht geeignet sind einen Weg aus der Daueraufgabe Soziale Stadt zu ermöglichen. So zeigt sich, dass es der Ressourcen anderer Milieus bedarf, um die Armutsfalle benachteiligter Quartiere aufzulösen.}}, author = {{Cardinali, Marcel}}, journal = {{urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung}}, keywords = {{benachteiligte Quartiere, Sozialraum, Soziale Stadt, Wohnanforderungen}}, number = {{2}}, pages = {{50--55}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss}}}, year = {{2017}}, } @article{5743, author = {{Cardinali, Marcel and Hall, Oliver}}, issn = {{2566-8900}}, journal = {{urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung}}, number = {{3}}, pages = {{3}}, title = {{{Städte und Regionen verändern sich (Editorial)}}}, year = {{2017}}, } @inproceedings{575, abstract = {{Additive manufacturing technologies can provide cost and time advantages in mold making, compared to traditional approaches. Nevertheless, their applicability is not yet completely proven, especially in terms of surface finishing. The aim of this research work is to create perfect mold inserts by Selective Laser Melting (SLM) and to optimize surface quality. Therefore a process is developed to reduce the effort of surface quality optimization including a high flexibility in design. The tested process shows that simple and affordable methods can lead to usable molds with only minor restrictions in terms of appearance. Due to the initial reduction of layer thicknesses and distinct settings of laser melting parameters, the surface smoothness is significantly enhanced during the SLM building process. Subsequently blasting, manual grinding, as well as polishing operations, enable a selective smoothening of the surface up to a polished finish. As a result, the built tool parts can be used instantly for injection molding.}}, author = {{Elstermeyer, O. and Villmer, Franz-Josef}}, booktitle = {{Production Engineering and Management}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-946856-01-6}}, keywords = {{Tool making, Direct rapid tooling, Additively manufactured molds, Selective laser melting, Additive manufacturing process chain, Post-processing}}, location = {{Pordenone, Italy}}, number = {{1}}, pages = {{101--113}}, title = {{{SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization}}}, year = {{2017}}, } @article{5750, author = {{Cardinali, Marcel and Hall, Oliver}}, issn = {{2566-8900}}, journal = {{urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung}}, number = {{2}}, pages = {{3}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Die Stadt der Zukunft (Editorial)}}}, year = {{2017}}, } @inproceedings{576, abstract = {{Due to a high level of competition in automotive industry, it is essentially important for automotive companies to develop innovative strategies and technologies in production and logistics. Postponement of production difference, i.e., customer individualized demand has been considered as an innovative strategy and more or less implemented in the production process, mostly before and during the final assembly. This paper proposed the concept of postponing the individualization of some components after the assembly. The idea is to use the idle times especially during the distribution process when vehicles are accumulated to generate big transportation batches or the follow-up transport does not start immediately. The individualization is carried out in specially realized workshops. Objectives of the approach are to reduce variations in the manufacturing, to shorten delivery times and to give consumers the ability to reorder individual components shortly before delivery. This kind of postponement of individualization induces the requirement of redesigning the logistics network, which means the selection of workshop locations and the new selection of the suppliers for the individualized components. To reach this aim, a software tool has been developed. In the tool, the data required in the logistics network such as suppliers and workshop potential locations are managed in a MySQL database and the optimization of the network is achieved by the especiallydeveloped non-dominated sorting genetic algorithm-II (NSGA-II). The design and development of the solution individuals and the fitness functions, which are the most important elements of a genetic algorithm, are based on the mathematical model of the logistics network design with product late individualization. Different scenarios are considered and generated to examine the applicability of the methodology in automotive practice. The optimization model and the heuristics of genetic algorithm are validated through the Pareto solutions for different scenarios.}}, author = {{Li, Li}}, booktitle = {{Production Engineering and Management}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-946856-01-6}}, keywords = {{Automotive industry, Logistics network configuration, Late product individualization, Postponement, NSGGA}}, location = {{Pordenone, Italy}}, number = {{1}}, pages = {{139--150}}, title = {{{Optimization of Automotive Logistics Network with Late Product Individualization}}}, year = {{2017}}, } @inproceedings{577, abstract = {{A rising number of product variants together with decreasing lot sizes are a result of the trend of individualization. Besides the upcoming organizational issues, changes in the production technologies are required. Direct digital manufacturing contributes to solve this problem by enabling the production of parts right from the CAD data.Process capability analysis is applied in several industries to prove the reliable compliance of products with quality requirements. As it is based on statistical methods, new challenges arise in the context of single-part production.The paper describes and compares different approaches for the adoption of process capability analysis for single-part production with special focus on additive manufacturing technologies. The statistical background and the applicability of different capability parameters are discussed. An overview of existing research work is given and supplemented by own approaches for the adoption of statistical methods for single-part production. The aim of the research work is to establish a first approach for the qualification of new technologies in single-part production.}}, author = {{Huxol, Andrea and Davis, Andrea and Villmer, Franz-Josef and Scheideler, Eva}}, booktitle = {{Production Engineering and Management}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-946856-01-6}}, keywords = {{Statistical process control, Process capability analysis, Single-part production, Process optimization}}, location = {{Pordenone, Italy}}, number = {{1}}, pages = {{63--74}}, title = {{{Deployment of Process Capability Analysis for Single-Part Production}}}, year = {{2017}}, } @article{5774, author = {{Häusler, Axel and Volk, Kathrin and Staubach, Reiner}}, issn = {{2566-8900}}, journal = {{urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung}}, number = {{02}}, pages = {{88--89}}, publisher = {{Hochschule Ostwestfalen-Lippe / Institut für Designstrategien}}, title = {{{Die Stadt der Zukunft - Resilienter Lebensraum}}}, year = {{2017}}, } @inproceedings{578, abstract = {{Challenges of companies are presented by an increasing number of product variants or a growing product complexity in combination with a reduction of lot size. Therefore the scope of the work in the field of manual assembly will be more complex. This situation leads to a need of assistance systems. With these systems, the assembly workers will be qualified to execute their work tasks within the requirements. This approach set up on a further implementation of an assistance system at a great device manufacturer. The main focus of this implementation was the technical and functional design of the assistance system, but a successful implementation requires also an active handling of the change process. The purpose of this paper is the presentation of design principles in form of a process model for the implementation of digital assistance systems. The development of the design principles takes place in a participative approach. Executives, work councilsand workers develop the project results together with external project members. Project managers will be able to manage implementation processes with the results and take all the success factors into account.}}, author = {{Kleineberg, Tim and Eichelberg, Matthias and Hinrichsen, Sven}}, booktitle = {{Production Engineering and Management}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-946856-01-6}}, keywords = {{Assistance systems, Change management, Success factors, Process model}}, location = {{Pordenone, Italy}}, number = {{1}}, pages = {{25--36}}, title = {{{Participative Development of an Implementation Process for Worker Assistance Systems}}}, year = {{2017}}, } @article{5785, author = {{Kühne, K. and Guhr, Nadine and Breitner, M.H.}}, journal = {{International Journal of Business, Humanities and Technology (IJBHT)}}, number = {{7(4)}}, pages = {{1--8}}, title = {{{Adoption Determinants of XML-Based Invoices: An Exploratory Investigation}}}, year = {{2017}}, } @inproceedings{579, abstract = {{Selective Laser Melting (SLM) is a powder bed fusion process to produce additively metal parts. From the current point of view, it seems to be one of the most promising additive manufacturing technologies for the production of end use parts. An increasing number of examples prove the successful application of SLM for technical part production. Nevertheless, they also show the enormous effort that is still required to qualify the production process of every single part individually.The present paper gives an overview of the major influencing factors of the SLM process. To get a comprehensive research approach, existing publications on the topic are taken into account as well as own experimental work, evaluating the effects of the process parameters on the relative density of samples made from tool steel. The experimental setup and the results are described and opportunities for the further research work are discussed.}}, author = {{Huxol, Andrea and Scheideler, Eva and Villmer, Franz-Josef}}, booktitle = {{Production Engineering and Management}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-946856-01-6}}, keywords = {{Selective laser melting, Additive manufacturing, Process parameters, Process optimization}}, location = {{Pordenone, Italy}}, number = {{1}}, pages = {{13--34}}, title = {{{Influencing Factors on Part Quality in Selective Laser Melting}}}, year = {{2017}}, } @inproceedings{580, abstract = {{Additive Manufacturing (AM) is increasingly used to design new products. This is possible due to the further development of the AM-processes and materials. The lack of quality assurance of AM built parts is a key technological barrier that prevents manufacturers from adopting. The quality of an additive manufactured part is influenced by more than 50 parameters, which make process control difficult. Current research deals with using real time monitoring of the melt pool as feedback control for laser power. This paper illustrates challenges and opportunities of applying statistical predictive modeling and unsupervised learning to control additive manufacturing. In particular, an approach how to build a feedforward controller will be discussed.}}, author = {{Scheideler, Eva and Ahlemeyer-Stubbe, Andrea}}, booktitle = {{ Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy }}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-946856-01-6}}, keywords = {{Additive manufacturing, Process control, Predictive modeling, Predictive control}}, location = {{Pordenone, Italy}}, number = {{1}}, pages = {{3--12}}, title = {{{Quality Control of Additive Manufacturing Using Statistical Prediction Models}}}, volume = {{2017}}, year = {{2017}}, } @inbook{5800, author = {{Degirmenci, K. and Guhr, Nadine and Breitner, M.H.}}, booktitle = {{Handbuch Mobile Learning}}, editor = {{Gloerfeld, C. and de Witt, C.}}, pages = {{231--253}}, publisher = {{Springer}}, title = {{{Datenschutz, Informationssicherheit und Copyright – Zugriffsrechte von Mobile Learning Applikationen und Nutzerbedenken}}}, year = {{2017}}, } @inproceedings{581, author = {{Scheideler, Eva and Villmer, Franz-Josef}}, booktitle = {{Rapid.Tech – International Trade Show & Conference for Additive Manufacturing}}, isbn = {{978-3-44645459-0}}, number = {{1}}, pages = {{10--24}}, publisher = {{Carl Hanser Verlag GmbH & Co. KG}}, title = {{{Anforderungen an integrierte Prozessketten in der Additiven Fertigung}}}, doi = {{10.3139/9783446454606.001}}, year = {{2017}}, } @inproceedings{5852, author = {{Heusler, Winfried and Faltus, Eva-Maria and Arztmann, Daniel}}, booktitle = {{Façade Tectonics Conference Proceedings}}, location = {{Los Angeles}}, title = {{{Building Healthy Buildings – Challenges and Opportunities of the Digital Transformation}}}, year = {{2017}}, } @inproceedings{5867, author = {{Arztmann, Daniel}}, booktitle = {{Fassade 2017 an der Technischen Hochschule Ostwestfalen Lippe, Detmold, 24.11.2017}}, location = {{Detmold}}, publisher = {{Technischen Hochschule Ostwestfalen-Lippe}}, title = {{{Prospective Challenges in Holistic Facade Design : Vortrag}}}, year = {{2017}}, } @inproceedings{5894, author = {{Krüger, J. and Sachs, Hans}}, booktitle = {{Fassade 2017 an der Technischen Hochschule Ostwestfalen Lippe, Detmold, 24.11.2017}}, location = {{Detmold}}, publisher = {{Technischen Hochschule Ostwestfalen-Lippe}}, title = {{{Digital Hut}}}, year = {{2017}}, } @book{5899, author = {{Sachs, Hans}}, isbn = {{9781389556586}}, pages = {{76}}, publisher = {{Selbstverlag}}, title = {{{Digital Crafting}}}, year = {{2017}}, } @book{5902, author = {{Sachs, Hans and Graf, Markus}}, publisher = {{Selbstverlag}}, title = {{{ New Babylon : Shared Towers}}}, year = {{2017}}, } @inbook{5908, author = {{Sachs, Hans and Pottgiesser, Uta and Kreplin, Susann and Lemberski, David Ignatz}}, booktitle = {{efnMOBILE 2.0 : efficient envelopes}}, isbn = {{978-94-92516-87-9}}, pages = {{66 -- 81}}, publisher = {{TU Delft Open}}, title = {{{Form Finding Fabrication}}}, year = {{2017}}, } @inbook{5909, author = {{Jacobi, Ricarda and Sachs, Hans and Röcker, Carsten and Althaus, Christoph and Kahre-Heidemann, Jan}}, booktitle = {{efnMOBILE 2.0 : efficient envelopes}}, isbn = {{978-94-92516-87-9}}, pages = {{82 -- 93}}, publisher = {{TU Delft Open}}, title = {{{Liquid Space}}}, year = {{2017}}, } @inbook{5952, author = {{Nether, Ulrich}}, booktitle = {{Informed Architecture}}, editor = {{Hemmerling, Marco and Cocchiarella, Luigi }}, isbn = {{978-3-319-53134-2 }}, pages = {{115--118}}, publisher = {{Springer}}, title = {{{Human, Space and Digitization}}}, doi = {{10.1007/978-3-319-53135-9_11}}, year = {{2017}}, } @inproceedings{5982, abstract = {{Yugoslavian Modernist Architecture, although part of a larger cultural phenomenon, received hardly any international attention, since there are only a few internationally published studies about it. Nevertheless, Modernist Architecture of the Inter-war Yugoslavia (Kingdom of Yugoslavia), and specially Modernist Architecture of the Post-war Yugoslavia (Socialist Federal Republic of Yugoslavia under the "reign" of Tito), represents the most important architectural heritage of the 20th century in former Yugoslavian countries. Belgrade, as the capital city of both newly founded Yugoslavia(s), experienced an immediate economic, political and cultural expansion after the both wars, as well as a large population increase. The construction of sufficient and appropriate new housing was a major undertaking in both periods (1919-1940 and 1948-1980), however conceived and realized with deeply diverging views. The transition from villas and modest apartment buildings, as main housing typologies in the Inter-war period, to the mass housing of the Post-war period, was not only a result of the different socio-political context of the two Yugoslavia(s), but also the country's industrialization, modernization and technological development. Through the classification of Modernist housing buildings in Belgrade, this paper will investigate on relations between the transformations of the main housing typologies executed under different socio-political contexts on the one side, and development of building technologies, construction systems and materials applied on those buildings on the other side. The paper wants to shed light on the Yugoslavian Modernist Architecture in order to increase the international awareness on its architectural and heritage values. The aim is an integrated re-evaluation of the buildings, presentation of their current condition and potentials for future (re)use with a specific focus on building envelopes and construction.}}, author = {{Dragutinovic, Anica and Pottgiesser, Uta and de Vos, Ess and Melenhorst, Michel}}, booktitle = {{World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium - WMCAUS : 12-16 June 2017, Prague, Czech Republic}}, location = {{Prague}}, number = {{5}}, title = {{{Modernism in Belgrade: Classification of Modernist Housing Buildings 1919-1980}}}, doi = {{10.1088/1757-899X/245/5/052075}}, volume = {{245}}, year = {{2017}}, } @article{609, abstract = {{Einfach, ohne Expertenwissen anzuwenden – solch ein Planungswerkzeug spart Zeit und Geld. Dieser Artikel stellt eine neue, effiziente Berechnungsmöglichkeit vor, die z.B. Vertriebsmitarbeiter oder Architekten befähigt, Risiken bezüglich Durch‐ oder Absturzsicherheit bei allseitig gelagerten Verglasungen früh in der Planung schnell abzuprüfen. Dabei werden statistische Modelle und Simulationsberechnungen eingesetzt. Verifiziert wurde die Methode gemäß DIN 18008 Teil 4 und Teil 6 mit den Möglichkeiten der Finite‐Element‐Rechnung und Referenzdatensätzen. Sie kann eine finale statische Beurteilung (z.B. prüffähige Statik) nicht ersetzen, doch sie kann im Lauf der Planung verlässliche Abschätzungen liefern und somit Geld und Zeit einsparen.}}, author = {{Scheideler, Eva and Ahlemeyer-Stubbe, Andrea and Scheideler, Josef}}, issn = {{2509-7075}}, journal = {{ce/papers : Proceedings in Civil Engineering}}, number = {{1}}, pages = {{142--152}}, publisher = {{Ernst & Sohn, a Wiley brand }}, title = {{{Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau}}}, doi = {{10.1002/cepa.16}}, volume = {{1}}, year = {{2017}}, } @inproceedings{610, author = {{Deuter, Andreas and Otte, Andreas and Höllisch, Daniel}}, booktitle = {{Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017}}, editor = {{Trächtler, Ansgar}}, location = {{Paderborn}}, pages = {{211--222}}, title = {{{Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration}}}, volume = {{369}}, year = {{2017}}, } @inproceedings{6182, author = {{Müller, Ulrich and Wilhelm, Patrick}}, location = {{Kigali/ Rwanda}}, title = {{{Mechanical Steam Treatment (MSD) of plant material}}}, year = {{2017}}, } @inproceedings{6183, author = {{Müller, Ulrich and Rossmann, S. and Merck, C. and Schneider, Jan}}, location = {{Kigali/ Rwanda}}, title = {{{Direct Homogenization of Beverage Emuslions with the innovative Counterflow Injection Process}}}, year = {{2017}}, } @inproceedings{6184, author = {{Müller, Ulrich}}, location = {{Fulda}}, title = {{{Entkeimung von Kräutern und Gewürzen – eine Übersicht über aktuelle Verfahren}}}, year = {{2017}}, } @proceedings{6210, editor = {{Song, Jian}}, isbn = {{978-3-00-055212-0}}, location = {{Lemgo}}, pages = {{228}}, publisher = {{Labor für Feinsystemtechnik, Hochschule Ostwestfalen-Lippe}}, title = {{{Elektrische und optische Verbindungstechnik 2017 : Tagungsband der GMM-Fachtagung : 6. Symposium Connectors}}}, year = {{2017}}, } @article{6254, author = {{Song, Jian and Schinow, Vitali and Yuan, Haomiao and Koch, Christian}}, journal = {{Tribologie und Schmierungstechnik}}, pages = {{13 -- 19}}, title = {{{Kontaktanordnung und Lebensdauer von elektrischen Kontaktoberflächen}}}, volume = {{6}}, year = {{2017}}, } @inproceedings{6294, author = {{Kuckuck, Carsten and Song, Jian}}, booktitle = {{Tagungsband der VDE/VDI-GMM-Fachtagung „Symposium Connectors“}}, location = {{Lemgo}}, pages = {{197 -- 209}}, title = {{{Kontaktierung von Litzenleitern}}}, year = {{2017}}, } @inproceedings{6321, author = {{Song, Jian and Yuan, Haomiao and Schinow, Vitali}}, booktitle = {{Proceedings of VDE-Fachtagung Albert-Keil-Kontakt-Seminar 2017}}, pages = {{54 -- 62}}, title = {{{Calculation Models for Prediction of Wear and Wear Through of Coatings of Electrical Contacts with a Sphere/Flat Configuration}}}, year = {{2017}}, } @inproceedings{6330, author = {{Song, Jian and Schinow, Vitali and Yuan, Haomiao}}, booktitle = {{Proceedings of the 63rd IEEE Holm Conference on Electrical Contacts}}, location = {{Denver, USA}}, pages = {{117 -- 124}}, title = {{{Third bodies in electrical contacts – Wear and electrical performance}}}, year = {{2017}}, } @inproceedings{6333, author = {{Song, Jian and Hansmann, S. and Koch, C. and Schinow, V.}}, booktitle = {{Tagungsband der VDE/VDI-GMM-Fachtagung „Symposium Connectors“}}, location = {{Lemgo}}, pages = {{91 -- 99}}, title = {{{Mechanisch gehärtete Zinnoberfläche}}}, year = {{2017}}, } @inproceedings{6337, author = {{Song, Jian and Hansmann, Stephan and Koch, Christian and Yuan, Haomiao and Schinow, Vitali}}, booktitle = {{Proceedings of the 6th World Tribology Congress 2017}}, title = {{{Enhanced wear resistance of mechanically modified tin plating}}}, year = {{2017}}, } @inproceedings{6338, author = {{Yuan, Haomiao and Schinow, Vitali and Song, Jian}}, booktitle = {{Proceedings of the 6th World Tribology Congress 2017}}, title = {{{Simulation models for predicting the wear process of coated electrical contacts}}}, year = {{2017}}, } @inproceedings{6352, author = {{Song, Jian}}, location = {{Shanghai}}, title = {{{Models for Accelerated Testing of Network Components of Autonomous Cars and Smart Factories}}}, year = {{2017}}, } @inbook{10072, author = {{Winker, Martina and Felmeden, Jörg and Werner, Thomas and Davoudi, Arash and Ott, Ralf}}, booktitle = {{Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume}}, editor = {{Winker, Martina and Trapp, Jan and Libbe, Jens and Schramm, Engelbert}}, isbn = {{978-3-88118-584-4}}, pages = {{45–56}}, publisher = {{Deutsches Institut für Urbanistik gGmbH (Difu)}}, title = {{{Technische Systemvarianten einer sich differenzierenden Wasserinfrastruktur}}}, volume = {{16}}, year = {{2017}}, } @inbook{10074, author = {{Winker, Martina and Libbe, Jens and Felmeden, Jörg and Giese, Thomas and Kunkel, Sabine}}, booktitle = {{Wasserinfrastrukturen für die zukunftsfähige Stadt : Beiträge aus der INIS-Forschung.}}, keywords = {{Abschlussarbeiten / Dissertation, Abwasserbehandlung, Bauwesen, Effizienz, Planung}}, pages = {{140–142}}, publisher = {{Deutsches Institut für Urbanistik gGmbH (Difu)}}, title = {{{Dependenz und Interdeprendenzen von Siedlungs- und Baustruktur mit der Wasser- und Energieinfrastruktur}}}, year = {{2017}}, } @inbook{10076, abstract = {{Einleitung Bei der Transformation der leitungsgebundenen Wasserinfrastruktur stellt sich mit Blick auf eine Stadt/Gemeinde die Frage, wo und wie angefangen werden könnte. In welchen Gebieten könnten neuartige Systemvarianten eine interessan1te Alternative zum konventionellen System darstellen? Wie lassen sich diese Ge2biete identifizieren? Diesen Fragen ging netWORKS 3 in den Städten Hamburg und Frankfurt am Main nach. Neben der Umsetzung auf Gebäudeebene (siehe Beitrag B7) bestand die Aufgabe zunächst darin, Gebiete mit hinreichend Umwandlungspotenzial (im Weiteren als {\glqq}attraktive Gebiete{\grqq} bezeichnet) für neuartige Wasserinfrastruktur3systeme zu identifizieren}}, author = {{Winkler, Martina and Felmeden, Jörg and Michel, Bernhard and Milosevic, Danijela and Werne, Thomas and Giese, Thomas}}, booktitle = {{Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume}}, editor = {{Winker, Martina and Trapp, Jan and Libbe, Jens and Schramm, Engelbert}}, isbn = {{978-3-88118-584-4}}, keywords = {{Abwasserbehandlung, Datensammlung, Demografischer Wandel, Digitalisierung, Planung}}, pages = {{71–79}}, publisher = {{Deutsches Institut für Urbanistik gGmbH (Difu)}}, title = {{{Identifikation von Transformationsräume am Beispiel von Frankfurt am Main und Hamburg}}}, volume = {{16}}, year = {{2017}}, } @misc{10081, author = {{Hillebrand, Thomas and Bieker, Susanne and Dockhorn, Thomas and Felmeden, Jörg and Kaufmann-Alves, Inka and Langergraber, Günter and Lautenschläger, Sabine and Maurer, Max and Neuhausen, Silke and Steinmetz, Heidrun}}, booktitle = {{Abwasserwirtschaft im ländlichen Raum 2017 : ÖWAV-Seminar, Wien 28. November 2017}}, isbn = {{978-3-85234-140-8 }}, location = {{Wien}}, publisher = {{Universität für Bodenkultur Wien Institut für Siedlungswasserbau, Industriewasserwirtschaft und Gewässerschutz }}, title = {{{Leitfaden zum DWA Arbeitsblatt A-272 "Neuartige Sanitärsysteme"}}}, volume = {{Band 245, G1-G14}}, year = {{2017}}, } @inbook{10084, author = {{Felmeden, Jörg and Bernhard, Michel and Zimmermann, Martin}}, booktitle = {{Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume}}, editor = {{Winker, Martina and Trapp, Jan and Libbe, Jens and Schramm, Engelbert}}, isbn = {{978-3-88118-584-4 }}, keywords = {{Planung, Rohrsysteme}}, pages = {{171–184}}, publisher = {{Deutsches Institut für Urbanistik gGmbH (Difu)}}, title = {{{Integrierte Bewertung auf Modellgebietsebene}}}, volume = {{16}}, year = {{2017}}, } @inbook{10090, author = {{Felmeden, Jörg and Michel, Bernhard and Zimmermann, Martin}}, booktitle = {{Wasserinfrastrukturen für die zukunftsfähige Stadt}}, keywords = {{Planung, Pumpen, Rohrsysteme, Wasserwirtschaft}}, pages = {{158–161}}, publisher = {{Deutsches Institut für Urbanistik gGmbH (Difu)}}, title = {{{Bewertungsrahmen und -kriterien für die integrierte Bewertung neuartiger Wasserinfrastrukturen}}}, year = {{2017}}, } @inbook{10096, author = {{Felmeden, Jörg and Michel, Bernhard and Schramm, Engelbert and Trapp, Jan and Zimmermann, Martin}}, booktitle = {{Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume}}, editor = {{Winker, Martina and Trapp, Jan and Libbe, Jens and Schramm, Engelbert}}, isbn = {{978-3-88118-584-4}}, pages = {{185–194}}, publisher = {{Deutsches Institut für Urbanistik gGmbH (Difu)}}, title = {{{Gesamtstädtische und regionale Perspektive}}}, volume = {{16}}, year = {{2017}}, } @misc{1020, author = {{Schulte, Julia}}, keywords = {{Kreativtechnik, Logo, Markencharakterisierung, Verpackungsdesign}}, pages = {{125}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Entwicklung einer Getränkemarke mit dem Schwerpunkt Corporate Design}}}, year = {{2017}}, } @inproceedings{10226, abstract = {{This paper presents a bidirectional optical data transmission system as an enhancement of a contactless power transmission system (CPTS). The latter consists of two separate devices and is able to transmit up to 240W of electrical power using inductive resonant coupling. The optical system consists of two self-developed light-guiding structures and a short-reach free-space optical path. As source and sink of the optical system a light-emitting diode resp. a photodiode with a centroid wavelength of 850nm are used. The optical system is positioned within the CPTS; it transmits the PROFIBUS protocol. Due to the restrictions given by the applications areas of the CPTS, such as air gap up to 5°mm, misalignment up to 2 mm, tilting up to 5 and rotation angle up to 360°, different kinds of light-guiding structures are analyzed by simulation. Based on these results the most promising structures are selected and manufactured. Hereafter the attenuation and the near field characteristic of one light-guiding structure is analyzed. After this, the attenuation based on misalignment, variation of air gap, tilting and rotation between two light-guiding structures are analyzed by measurement. To check whether the requirements of the PROFIBUS has been satisfied by the complete data transmission system, the transient transmission behavior of the system was analyzed by a pseudo-random bit stream. In this paper the most important results of the design, the simulation and the measurement are explained. The presented results demonstrate the ability to design of such systems based on simulations and to evaluate the suitability of various geometries for present and future works.}}, author = {{Neu, Marc and Grünberg, Olaf and Christophliemke, Tobias and Stübbe, Oliver}}, booktitle = {{Optical Interconnects XVII}}, editor = {{Schröder, Henning and Chen, Ray T.}}, issn = {{0277-786X}}, location = {{San Francisco}}, publisher = {{SPIE}}, title = {{{Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications}}}, doi = {{10.1117/12.2251014}}, volume = {{10109}}, year = {{2017}}, } @misc{10228, abstract = {{In diesem Beitrag werden die Störeinflüsse für optische Freiraumkommunikation in industriellen Produktionsumgebungen empirisch analysiert und ein Modellierungsansatz abgeleitet. Um drahtlose Kommunikationstechnologien einzusetzen, sind erhebliche Resistenzen gegenüber Störeinflüssen erforderlich, die Visible Light Communication (VLC) bis heute nicht vollständig erfüllt. Anhand von empirischen Messreihen wird in diesem Beitrag nachgewiesen, dass bei der Systemauslegung von VLC, anders als bisher, unterschiedliche Störquellen zu berücksichtigen sind, die orts- und zeitvariante Eigenschaften haben. Auf empirischen Untersuchungen basierend, wird eine alternative Berechnung der gesamten Störquellenleistung vorgeschlagen, die unmittelbar Auswirkung auf das Signal-Rausch-Verhältnis (SNR) und die maximal verfügbare Kanalkapazität hat. Der vorgestellte Ansatz dient dazu VLC-Systeme auch für industrielle Produktionsumgebungen auslegen zu können.}}, author = {{Schneider, Daniel and Flatt, Holger and Jasperneite, Jürgen and Stübbe, Oliver}}, booktitle = {{Komma 2017 : Kommunikation in der Automation : 14.-15.11.2017 : 8. Jahreskolloquium "Kommunikation in der Automation"}}, editor = {{Jumar, Ulrich and Jasperneite, Jürgen}}, isbn = {{978-3-944722-63-4}}, location = {{Magdeburg}}, publisher = {{ Institut für Automation und Kommunikation e.V. Magdeburg, An-Institut der Otto-von-Guericke-Universität Magdeburg }}, title = {{{Entwurf eines Kanalmodells für Visible Light Communication in dynamischen, industriellen Umgebungen}}}, year = {{2017}}, } @proceedings{10634, editor = {{Rubart, Jessica and Yesilada, Yeliz}}, location = {{Prague, Czech Republic}}, publisher = {{CEUR-WS.org}}, title = {{{Hypertext 2017 Extended Proceedings}}}, year = {{2017}}, } @article{10662, author = {{Latos, Benedikt and Holtkötter, Christoph and Brinkjans, Jan and Kalantar, Peyman and Przybysz, Philipp M. and Mütze-Niewöhner, Susanne}}, issn = {{2366-4681}}, journal = {{Zeitschrift für Arbeitswissenschaft}}, keywords = {{General Medicine}}, number = {{1}}, pages = {{90--98}}, publisher = {{Springer}}, title = {{{Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie}}}, doi = {{10.1007/s41449-017-0081-8}}, volume = {{72}}, year = {{2017}}, } @article{10663, author = {{Latos, Benedikt and Holtkötter, Christoph and Brinkjans, Jan and Kalantar, Peyman and Przybysz, Philipp M. and Mütze-Niewöhner, Susanne}}, issn = {{0340-2444}}, journal = {{Zeitschrift für Arbeitswissenschaft}}, keywords = {{General Medicine}}, number = {{1}}, pages = {{90--98}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie}}}, doi = {{10.1007/s41449-017-0081-8}}, volume = {{72}}, year = {{2017}}, } @inproceedings{10669, author = {{Latos, Benedikt and Kalantar, Peyman and Przybysz, Philipp and Mütze-Niewöhner, Susanne and Holtkötter, Christoph and Brinkjans, Jan}}, booktitle = {{ Modelling and simulation 2017 : the European Simulation and Modelling Conference 2017 : ESM'2017 : October 25-27, 2017, Lisbon, Portual }}, editor = {{ Gonçalves, Paulo J.S.}}, isbn = {{978-492859-00-6 (Formal falsche ISBN)}}, location = {{Lisbon, Portugal}}, pages = {{162--166}}, publisher = {{EUROSIS-ETI}}, title = {{{Simulation of a Flexible and Adaptable One-Piece-Flow Assembly Line Based on a Process Flow of Colored and Timed Petri Nets}}}, year = {{2017}}, } @inproceedings{10670, author = {{Latos, Benedikt and Holtkötter, Christoph and Brinkjans, Jan and Przybysz, Philipp and Mütze-Niewöhner, Susanne and Schlick, Christopher}}, booktitle = {{Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017}}, isbn = {{9783936804225}}, location = {{FHNW Brugg-Windisch, Schweiz}}, publisher = {{GfA-Press}}, title = {{{Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie bei einem Hersteller von weißer Ware}}}, year = {{2017}}, } @inproceedings{10671, author = {{Latos, Benedikt and Harlacher, Markus and El-Mahgary, Mochtar and Götzelmann, Daniela and Przybysz, Philipp and Mütze-Niewöhner, Susanne and Schlick, Christopher}}, booktitle = {{Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017 }}, isbn = {{9783936804225}}, location = {{FHNW Brugg-Windisch, Schweiz}}, publisher = {{GfA-Press}}, title = {{{Komplexität in Arbeitssystemen: Analyse und Ordnung von Beschreibungsansätzen aus unterschiedlichen Disziplinen}}}, year = {{2017}}, } @proceedings{1102, abstract = {{Since 2000 (in the beginning 21st Century) climate change and globalisation have influenced the actual world and all societies tremendously and the have also affected the way we are building. Safety and security requirements are increasing and are consequently influencing the design of the building envelope. ‘Resilience’ describes the function and ability of buildings and their facades to to recover from or adjust easily to change. “Resilience” addresses the impacts of climate change and globalization and of safety and security requirements on the building envelope. The first edition of the Detmold Conference Week 2017 connects education and research, scholars and professionals in different events and formats: a master workshop and two conferences will discuss the approaches of resilient design and construction for buildings and facades. The direct way to specific stresses forced by water, wind, fire, explosion or earthquake but also in an indirect way seen as a general ability of adaptivity to different changes will be discussed at the facade2017 conference on Friday 24th November 2017 from different academic and professional perspectives. The 1st RMB Conference on Thursday 23rd November 2017 is organized by the consortium of the ERASMUS+ project “RMB: Reuse of Modernist Buildings. Design Tools for Sustainable Transformations”. There representatives of the consortium as well as international guest will debate in particular issues of Resilience of Modern Movement Buildings and Neighborhoods. During the conference we will discuss new design and educational concepts for the reuse of modern postwar buildings for housing and other purposes – resilience through reuse. Scholars, PhD and master students present and discuss selected papers and posters.}}, editor = {{Melenhorst, Michael and Pottgiesser, Uta and Naumann, Christine and Kellner, Theresa}}, isbn = {{978-3-939349-27-3}}, location = {{Detmold}}, pages = {{349}}, title = {{{Detmold Conference Week 2017}}}, doi = {{10.25644/5sg5-zf09}}, year = {{2017}}, } @inproceedings{4789, author = {{Bunte, Andreas and Li, Peng and Niggemann, Oliver}}, booktitle = {{3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS)}}, title = {{{Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems}}}, year = {{2017}}, } @misc{4906, author = {{Borcherding, Holger and Austermann, Johann and Otte, Raphael and Windmann, Stefan and Köster, Markus and Stichweh, Heiko and Grabs, Volker and Ehlich, Martin and Hohnsbein, Thorsten}}, publisher = {{TIB Hannover}}, title = {{{Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik}}}, year = {{2017}}, } @misc{4907, author = {{Borcherding, Holger and Jerwan, Benjamin}}, publisher = {{TIB Hannover}}, title = {{{Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik}}}, year = {{2017}}, } @misc{4915, author = {{Borcherding, Holger and Steup, D. and Therolf, M. and Tolksdorf, A.}}, publisher = {{TIB Hannover}}, title = {{{Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA)}}}, year = {{2017}}, } @misc{4916, author = {{Wettlaufer, Jan and Borcherding, Holger and Hohnsbein, Thorsten}}, publisher = {{TIB Hannover}}, title = {{{InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: "Integration der störungsarmen Leistungselektronik in Industrieumrichter"}}}, year = {{2017}}, } @misc{4917, author = {{Bolte, S. and Cherkerzova, R. and Kaiser, Mario and Peters, A. and Spanier, Patrick and Böcker, J. and Borcherding, Holger}}, publisher = {{TIB Hannover}}, title = {{{Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld}}}, year = {{2017}}, } @article{5054, author = {{Fettig, Joachim and Pick, Volker and Liebe, H.}}, journal = {{Wat. Sci. Tech.}}, number = {{9}}, pages = {{2056--2063}}, title = {{{Particle separation from road runoff by a decentralised lamella system – laboratory tests and experiences in the field}}}, volume = {{75 }}, year = {{2017}}, } @article{5055, author = {{Meon, G. and Fettig, Joachim and Phuoc, N.V.}}, journal = {{Hydrologie und Wasserbewirtschaftung }}, number = {{6}}, pages = {{368--369}}, title = {{{Forschungskooperation mit Vietnam – das BMBF-Verbundvorhaben EWATEC-COAST}}}, volume = {{61}}, year = {{2017}}, } @article{5186, author = {{Iseke, Anja and Pull, Kerstin}}, issn = {{0167-4544}}, journal = {{Journal of Business Ethics}}, pages = {{1113--1133}}, title = {{{Female Executives and Perceived Employer Attractiveness: On the Potentially Adverse Signal of Having a Female CHRO Rather Than a Female CFO}}}, doi = {{10.1007/s10551-017-3640-1}}, year = {{2017}}, } @article{5188, author = {{Iseke, Anja and Pull, Kerstin}}, journal = {{ PersonalQuarterly, Vol. 69 (4)}}, pages = {{17--21}}, title = {{{Weibliche Nachwuchskräfte gewinnen? Mit Geschlechterstereotypen brechen!}}}, year = {{2017}}, } @inproceedings{5192, author = {{Pottgiesser, Uta and Kirch, Christoph}}, booktitle = {{Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al.}}, isbn = {{978-0-9928957-5-4}}, location = {{Edinburgh, Scotland}}, pages = {{4771--4778}}, title = {{{Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product}}}, year = {{2017}}, } @inproceedings{5196, author = {{Naumann, Christine and Höhmann, Ulrike and Pottgiesser, Uta}}, booktitle = {{Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al.}}, isbn = {{978-0-9928957-5-4}}, location = {{Edinburgh, Scotland}}, title = {{{Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia}}}, year = {{2017}}, } @book{5197, author = {{Knaack, Ulrich and Pottgiesser, Uta}}, isbn = {{978-94-92516-87-9}}, publisher = {{ TU Delft Open}}, title = {{{efnMOBILE 2.0 : efficient envelopes}}}, year = {{2017}}, } @book{5199, author = {{Pottgiesser, Uta and Storgaard, Eva and Van der Schueren, Iris and Wauters, Paul}}, title = {{{Mensen op de vlucht = People on the run}}}, year = {{2017}}, } @misc{5362, abstract = {{Seit 2016 erscheint das urbanLab Magazin jährlich als Fachzeitschrift für Stadt- und Regionalplanung mit dem Anspruch Forschung, Lehre und der Praxis in den Planungsdisziplinen des Spannungsfeldes Stadt und Quartier anhand konkreter Themencluster besser zu vernetzen. Wir geben zukunftsweisenden Ideen, Fachbeiträgen, Publikationen und kontroversen Diskussionen eine Plattform und bringen sie unterstützt durch Erkenntnisse aus unserer Forschung auf den Punkt.}}, booktitle = {{Die Stadt der Zukunft - Digital, gesund, sozial }}, editor = {{Hall, Oliver and Cardinali, Marcel}}, issn = {{2566-8919}}, number = {{2}}, title = {{{urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung}}}, year = {{2017}}, } @article{5396, author = {{Brandenburg, Stefan and Minge, Michael and Cymek, Dietlind Helene and Zeidler, Laura}}, journal = {{ Zeitschrift Forschung}}, pages = {{101--106}}, title = {{{Ethische Aspekte in der Forschung zu Mensch-Maschine-Systemen - Einblicke in die Arbeit einer Ethik-Kommission}}}, volume = {{Politik, Strategie, Management 10(3/4)}}, year = {{2017}}, } @article{5397, author = {{Brandenburg, Stefan and Minge, Michael and Cymek, Dietlind Helene}}, journal = {{i-com, Journal of Interactive Media}}, pages = {{267--273}}, title = {{{Common Challenges in Ethical Practice when Testing Technology with Human Participants: Analyzing the Experiences of a Local Ethics Committee}}}, volume = {{16(3)}}, year = {{2017}}, } @book{2773, author = {{Vetter, Andreas}}, isbn = {{3766722832}}, publisher = {{Callwey}}, title = {{{Die besten Einfamilienhäuser aus Beton}}}, year = {{2017}}, } @article{2885, author = {{Kutz, Gerd}}, issn = {{0938-2216}}, journal = {{Haut}}, number = {{6}}, pages = {{324--329}}, publisher = {{WPV, Wirtschafts- und Praxisverlag GmbH }}, title = {{{Zur Galenik topischer Lichtschutzmittel Haut}}}, volume = {{XXVVIII}}, year = {{2017}}, } @misc{2920, author = {{Hernández Rodriguez, Tanja and Kern, S. and Platas Barradas, O. and Pörtner, R. and Frahm, Björn}}, location = {{Lemgo, Germany}}, title = {{{Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren}}}, year = {{2017}}, } @misc{2921, author = {{Pörtner, R. and Möller, J. and Hernández Rodriguez, Tanja and Frahm, Björn and Hass, V. C.}}, location = {{Neu-Ulm, Germany}}, title = {{{Model-assisted design and optimization of biotechnological processes}}}, year = {{2017}}, } @misc{2950, author = {{Hernández Rodriguez, Tanja and Koopmann, K. S. and Klaes, J. and Kern, S. and Platas Barradas, O. and Pörtner, R. and Frahm, Björn}}, location = {{Munic, Germany}}, title = {{{Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren}}}, year = {{2017}}, } @misc{2994, author = {{Hernández Rodriguez, Tanja and Koopmann, K. S. and Pörtner, R. and Frahm, Björn}}, location = {{Recklinghausen, Germany}}, title = {{{Influence of parameter accuracies in cell culture seed train simulations}}}, year = {{2017}}, } @misc{2995, author = {{Hernández Rodriguez, Tanja and Krull, S. and Hass, V. C. and Möller, J. and Pörtner, R. and Frahm, Björn}}, location = {{Lausanne, Switzerland}}, title = {{{Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization}}}, year = {{2017}}, } @misc{2996, author = {{Hernández Rodriguez, Tanja and Krull, S. and Hass, V. C. and Pörtner, R. and Frahm, Björn}}, location = {{Neu-Ulm, Germany}}, title = {{{Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization}}}, year = {{2017}}, } @book{3033, author = {{Austermann-Haun, Ute and Felber, H.}}, isbn = {{978-3-88721-522-4}}, publisher = {{Hirthammer}}, title = {{{Abwasser Grundkurse}}}, year = {{2017}}, } @article{3057, author = {{Meier, J. F. and Austermann-Haun, Ute and Fettig, Joachim and Liebe, H. and Wichern, M.}}, journal = {{Water Science & Technology}}, number = {{8}}, pages = {{2065 -- 2074}}, title = {{{Operation of anaerobic filter compared with an anaerobic moving bed bioreactor for the treatment of waste water from hydrothermal carbonization of fine mulch}}}, volume = {{76}}, year = {{2017}}, } @proceedings{309, abstract = {{It is our pleasure to introduce the seventh edition of the International Conference on Production Engineering and Management (PEM), an event that is the result of the joint effort of the University of Trieste and the Ostwestfalen- Lippe University of Applied Sciences. The conference has been established as an annual meeting under the Double Degree Master Program “Production Engineering and Management” by the two partner universities. This year the conference is hosted at the university campus in Pordenone. The main goal of the conference is to offer students, researchers and professionals in Germany, Italy and abroad, an opportunity to meet and exchange information, discuss experience, specific practices and technical solutions for planning, design and management of manufacturing and service systems and processes. As always, the conference is a platform aimed at presenting research projects, introducing young academics to the tradition of symposiums and promoting the exchange of ideas between the industry and the academy. This year’s special focus is on industry sustainability, which is currently a major topic of discussion among experts and professionals. Sustainability can be considered as a requirement for any modern production processes and systems, and also has to be embedded in the context of Industry 4.0. In fact, the features and problems of industry 4.0 have been widely discussed in the last editions of the PEM conference, in which efficiency and waste reduction emerged as key factors. The study and development of the connections between future industry and sustainability is therefore critical, as highlighted in the recent “German Sustainable Development Strategy and the 2030 Agenda”. Accordingly, the seventh edition of the PEM conference aims to offer a contribution to the debate. The conference program includes 25 speeches organized in six sessions. Three are specifically dedicated to “Direct Digital Manufacturing in the context of Industry 4.0” and “Technology and Business for Circular Economy and Sustainable Production”. The other sessions are covering areas of great interest and importance to the participants of the conference, which are related to the main focus: “Innovative Management Techniques and Methodologies”, “Industrial Engineering and Lean Management” and “Wood Processing Technologies and Furniture Production”. The proceedings of the conference include the articles submitted and accepted after a careful double-blind refereeing process.}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-946856-01-6}}, location = {{Pardenone, Italy}}, number = {{.}}, pages = {{248}}, title = {{{Production Engineering and Management}}}, year = {{2017}}, } @inproceedings{3181, author = {{Austermann-Haun, Ute}}, location = {{Ilsede Peine}}, title = {{{Spurenstoffelimination mit Ozon und Aktivkohle}}}, year = {{2017}}, } @inproceedings{3182, author = {{Austermann-Haun, Ute}}, location = {{Mellendorf}}, title = {{{Grundlagen der biologischen Abwasserreinigung und Stickstoffelimination in Kläranlagen}}}, year = {{2017}}, } @inproceedings{3184, author = {{Austermann-Haun, Ute}}, location = {{Gelsenkirchen}}, title = {{{Anpassung der Kläranlagen an demographischen Wandel}}}, year = {{2017}}, } @inproceedings{328, abstract = {{In this paper, concepts for an extended DC network for the main power supply of components from various manufacturers in industrial production are presented. In the first part, detailed requirements for such a network are given from the viewpoint of a customer. Based on those, different concepts for AC/DC conversion and energy management are discussed. As far as AC/DC conversion is concerned, the advantages and drawbacks of several rectifier topologies are listed, as they have a significant impact on the system behavior and EMC properties. An intelligent energy management can improve the energy efficiency and reduce downtimes of a plant, which are major requirements from a customer’s viewpoint. }}, author = {{Borcherding, Holger and Austermann, Johann and Kuhlmann, Timm and Weis, Benno and Leonide, Andre}}, booktitle = {{2017 IEEE Second International Conference on DC Microgrids (ICDCM)}}, keywords = {{AC-DC power convertors, electromagnetic compatibility, energy conservation, energy management systems, rectifiers, main power supply, industrial production, DC network, AC-DC conversion, rectifier topologies, EMC properties, intelligent energy management, energy efficiency improvement, downtime reduction, Rectifiers, Switches, Voltage control, Topology, Network topology, Production, Grounding, industrial DC grid, SMART Grid}}, location = {{Nürnberg}}, number = {{1}}, pages = {{227--234}}, title = {{{Concepts for a DC Network in Industrial Production}}}, doi = {{10.1109/ICDCM.2017.8001049}}, year = {{2017}}, } @inproceedings{3326, author = {{Kutz, Gerd}}, location = {{Nürnberg}}, title = {{{Überwachung von Schmelz- und Feuchtgranulationsprozessen in Intensivmischern mit Hilfe der Parsum-Sonde}}}, year = {{2017}}, } @inproceedings{3329, author = {{Kutz, Gerd}}, booktitle = {{Teil 11: Symposium der GD Task Force „Licht.Hautkrebs.Prävention“: Prävention von hellem Hautkrebs im privaten und im beruflichen Bereich}}, location = {{München}}, title = {{{Galenik von aktuellen topischen Lichtschutzmitteln}}}, year = {{2017}}, } @article{3494, author = {{Reuber, Mark and Jungkind, Wilfried}}, issn = {{2191-6268}}, journal = {{Betriebspraxis & Arbeitsforschung : Zeitschrift für angewandte Arbeitswissenschaft}}, number = {{229}}, pages = {{38 -- 45}}, publisher = {{Heider}}, title = {{{Potenzialanalyse in KMU am Beispiel eines Maschinenbauunternehmens}}}, volume = {{2017}}, year = {{2017}}, } @inbook{3554, author = {{Riedl, Ulrich}}, booktitle = {{Nationalpark-Jahrbuch Unteres Odertal 2016}}, pages = {{86 -- 87}}, title = {{{Das BildungsNetzwerk Aue – eine Kooperation für Fließgewässer- und Auenschutz in der Bildung für nachhaltige Entwicklung}}}, volume = {{14}}, year = {{2017}}, } @book{3646, abstract = {{Das Verständnis, im Dienst der Gesellschaft zu bauen, kommt in der Arbeit von Reinhold Tobey zuallererst. Entsprechend geht diese Publikation in besonderer Konzentration Möglichkeiten von Partizipationsprozessen der am Bau beteiligten Berufsgruppen nach. Im Dialog mit ihnen entsteht ein spannendes Verhältnis von Distanz und Nähe. Ganz besonders gilt es, die persönlichen Bedürfnisse der Bauherren in Bezug auf das Wohnen auszuloten und sie für den Bauprozess fruchtbar zu machen. Ein weiteres wichtiges Thema der Publikation ist das Bauen mit dem nachhaltigen Werkstoff Holz, der die Bauten konstruktiv wie formal prägt. Das Buch versammelt drei Essays, Projektbeschreibungen, Erfahrungsberichte von Bauherren sowie zahlreiche Abbildungen und Pläne.}}, author = {{Brehm, Tobias and Carstensen, Jan and Drewes, Frank F. and Enßlin, Joachim and Hafer, Hannelore and Schwickert, Susanne and Streib, Michael and Strunz, Franz and Tobey, Reinhold}}, editor = {{Tobey, Reinhold and Bösel, Christina}}, isbn = {{978-3-945059-37-1}}, keywords = {{Architektur, Bauplanung, Holzbau, Partizipation}}, pages = {{192}}, publisher = {{e-enterprise}}, title = {{{Partizipation und Profession: Konstruktionen mit Holz 1984-2017}}}, year = {{2017}}, } @misc{3717, author = {{Austermann-Haun, Ute and Meier, J. F. and Nahrstedt, A. and Sikorski, D. and Kuhlmann, S. and Alt, K.}}, publisher = {{Stadt Detmold}}, title = {{{Spurenstoffelimination auf der Kläranlage Detmold mittels der Kombination von Ozon mit nachgeschalteter Aktivkohlefiltration}}}, year = {{2017}}, } @misc{3719, author = {{Austermann-Haun, Ute and Witte, H. and Weinig, J. and Schlötzer, Carsten}}, publisher = {{Bezirksregierung Detmold}}, title = {{{Abwasser-Boden-Grundwasser - Boden- und Grundwassergefährdung durch undichte Kanäle}}}, year = {{2017}}, } @misc{3741, author = {{Fettig, Joachim and Liebe, H. and Busch, A. and Austermann-Haun, Ute and Meier, J. F.}}, publisher = {{Deutsche Bundesstiftung Umwelt}}, title = {{{Entwicklung eines technischen Verwertungs- und Entsorgungskonzeptes für HTC-Prozesswasser}}}, year = {{2017}}, } @misc{9652, abstract = {{ Science Studies (German: "Wissenschaftsforschung") is one of the core modules of a new master's degree program "Higher Education" at the Hamburg Center for University Teaching and Learning (HUL). Subject matters of this executive program cover a broad field of higher educational issues: One of the areas of reflection dealt with in this program are the epistemological premises and the underpinning assumptions of higher educational research. This philosophy of science view on teaching and learning leads towards a confrontation with methodological questions on research designs in this area. The discussion focuses in more detail onto the role of communication in educational practice and its research ("science rhetorics"). The intention of this module is to go beyond simple answers by focusing on the reflective nature of researchers investigating their own field ("scholarship of teaching and learning"). It addresses questions of higher educational research from a higher educational research perspective and therefore may be identified with the concept of "second order research": We hence aim at providing a new way of understanding higher educational research by following a second-order cybernetics and systems theories agenda referring to von Foerster, Maturana & Varela, von Glasersfeld and Luhmann. We developed the master's program by conducting a design-based research methodology. Its curriculum follows the results of this research process and its conceptual design presented in this contribution therefore is to be classified as "research-based" rather than "based on experience".}}, author = {{Schmohl, Tobias}}, booktitle = {{International Conference New Perspectives in Science Education }}, location = {{Florence, Italy}}, publisher = {{libreriauniversitaria.it edizioni}}, title = {{{Science Studies: An Integral Part of a Research Based Master's Degree Curriculum}}}, year = {{2017}}, } @inbook{9755, abstract = {{Die kooperative Landschaftsbewertung erfasst Landschaftswerte der Öffentlichkeit systematisch mit dem Ziel, die gewonnenen Informationen so zu verarbeiten, dass sie in einem bisher überwiegend positivistisch geprägten Planungssystem (räumliche Gesamtplanung, Landschaftsplanung) verwendbar sind und den ermittelten Inhalten und Werten ein eigenes Gewicht bei der Entscheidungsvorbereitung und -findung verliehen wird. Das Konzept basiert auf einem sozialkonstruktivistischen Landschaftsverständnis, nach dem Expertenurteile insbesondere beim Handlungsgegenstand Landschaft nur unter großen Unsicherheiten getroffen werden können. Am Beispiel der Ergebnisse kooperativer Landschaftsbewertungen lässt sich zeigen, mit welchen Problemen der planerische Umgang mit Landschaftswandel und Landschaftsästhetik in der postmodernen Gesellschaft konfrontiert wird. Gleichzeitig werden aber auch die Grenzen partizipatorischer Prozesse beschrieben und insbesondere unter Gerechtigkeitsaspekten analysiert. Gerade im Bereich der sozialen Medien werden sich diesbezüglich in der Zukunft zahlreiche weitere Möglichkeiten und daraus abgeleitete neue Fragen für die Landschaftsplanung ergeben.}}, author = {{Stemmer, Boris and Bruns, Diedrich}}, booktitle = {{Landschaftsästhetik und Landschaftswandel}}, editor = {{Kühne, Olaf and Weber, Florian and Megerle, Heidi}}, isbn = {{978-3-658-15847-7}}, pages = {{283–302}}, publisher = {{Springer}}, title = {{{Kooperative Landschaftsbewertung in der räumlichen Planung – Planbare Schönheit?}}}, doi = {{https://doi.org/10.1007/978-3-658-15848-4_16}}, year = {{2017}}, } @misc{9756, author = {{Stemmer, Boris and Bruns, Diedrich}}, booktitle = {{Fundberichte aus Hessen / Landesamt für Denkmalpflege Hessen Archäologie : Beiheft }}, issn = {{2940-5378}}, number = {{Beiheft 9}}, pages = {{167–182}}, publisher = {{Habelt }}, title = {{{Ausbau des Kulturlandschafts-Informationssystems KuLaDig zu einem partizipatorischen Landschaftsinformationssystem}}}, year = {{2017}}, } @inbook{9766, author = {{Moczek, Nicola and Stemmer, Boris}}, booktitle = {{Teaching-X-Change - Innovative Lehrideen und -formate an der Hochschule Ostwestfalen-Lippe}}, editor = {{Bartel, Yvonne-Christin and Kerber, Ulrike and Eller-Studzinsky, Bettina and Schäffer, Dennis and To, Kieu-Anh}}, isbn = {{978-3-940330-31-4}}, pages = {{113--133}}, title = {{{Planungsbezogene Soziologie – Psychologische Methoden zur Landschaftsbildbewertung}}}, doi = {{10.3278/6004753w}}, volume = {{2}}, year = {{2017}}, } @misc{9767, author = {{Rehhausen, Anke and Stemmer, Boris}}, booktitle = {{UVP-Report}}, issn = {{0933-0690}}, number = {{2}}, pages = {{118–126}}, publisher = {{UVP-Gesellschaft e.V.}}, title = {{{SUP auf Bundesebene: Aktuelle Berücksichtigung von kumulativen Wirkungen beim Ausbau von Infrastrukturen}}}, volume = {{31}}, year = {{2017}}, } @book{9904, abstract = {{In dem Sammelband beschreiben Vertreter:innen unterschiedlicher Fächer experimentelle Lehrveranstaltungen an Hochschulen. Die Ideen und Konzepte werden auf eine didaktische Metaebene gehoben, um sie in anderen Disziplinen zu adaptieren. }}, editor = {{Schäffer, Dennis and To, Kieu-Anh and Eller-Studzinsky, Bettina and Bartel, Yvonne-Christin}}, pages = {{182}}, title = {{{TeachingXchange}}}, doi = {{10.3278/6004753w}}, volume = {{2}}, year = {{2017}}, } @inbook{9938, author = {{Kunkel, Sabine and Utesch, Bernd and Winker, Martina and Felmeden, Jörg}}, booktitle = {{Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume}}, editor = {{Winker, Martina and Trapp, Jan and Libbe, Jens and Schramm, Engelbert}}, isbn = {{978-3-88118-584-4 }}, pages = {{99–115}}, publisher = {{Deutsches Institut für Urbanistik }}, title = {{{Wärmerückgewinnung und Betriebswassernutzung - Umsetzung einer Systemalternative in Frankfurt am Main}}}, volume = {{16}}, year = {{2017}}, } @misc{12975, abstract = {{Properly handled fish is usually marketed as “fresh fish” until day 10 after fishing. About 40% of the total fishery that is used for direct human consumption is marketed in fresh form stored at temperatures up to +2 °C. Currently, there are no validated methods available for controlling the recommended period of storage. Apart from being a potential source for food fraud, spoiled fish represents a major source of foodborne illnesses and intoxications. In this study, a rapid MALDI-TOF mass spectrometry based screening method was developed using the vitreous fluid of fish eyes as specimen for the examination of different days of storage. The vitreous fluid was collected from n = 100 freshly fished brown trouts at day 0, 3, 7, 9, and 11 post mortem (n = 20 brown trouts each day of examination). The samples were immediately measured by MALDI-TOF mass spectrometry in linear positive mode (mass range m/z 2000–20,000 Da). For quality assurance the experiment was repeated with a set of brown trouts (n = 100) originating from the same fish farm and with brown trouts (n = 100) originating from a different fish farm. For specificity testing rainbow trouts (n = 10) were examined accordingly. All obtained mass spectra were processed by means of MALDI Biotyper OC 3.1 and ClinProTools 3.0 software. The MALDI Biotyper approach showed limited applicability for the identification of the time of storage. However, it was suitable to reliably discriminate between the closely related species brown and rainbow trout. Processing by ClinProTools revealed four crucial mass peaks (m/z 2594 Da, m/z 4857 Da, m/z 4879 Da, m/z 4899 Da) which enabled a reliable differentiation between day 0 and 3, 7, 9, 11 (rate of correct identification > 90%) as well as the differentiation between day 3 and 7, 9, 11 (rate of correct identification > 72%). However, this approach showed limited applicability within the end of the tested period of storage when comparing between day 7, 9, or 11.}}, author = {{Ulrich, Sebastian and Beindorf, Philipp–Michael and Biermaier, Barbara and Schwaiger, Karin and Gareis, Manfred and Gottschalk, Christoph}}, booktitle = {{Food Control}}, issn = {{0956-7135}}, keywords = {{MALDI-TOF, Mass spectrometry, Freshness, Fish, Quality control, Authenticity}}, number = {{10}}, pages = {{281--289}}, publisher = {{Elsevier }}, title = {{{A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry}}}, doi = {{10.1016/j.foodcont.2017.05.005}}, volume = {{80}}, year = {{2017}}, } @misc{12976, abstract = {{The consumption of edible insects (entomophagy) will gain greater significance facing the increasing global population, which is suggested to reach 9 billion people in 2050 (FAO., 2009). Due to their high amount of proteins, fatty acids, vitamins, and minerals insects represent a valuable source of essential nutrients. While the consumption of insects is very common in many countries of Africa and Asia, there is a far smaller acceptance for entomophagy in Western cultures. Though, products such as noodles or burger paddies made from insect meal have a better compliance and can already be purchased in some countries of the European Union. This processing step however involves the risk of adulteration, because there is no more possibility to authenticate the insects once they are ground. The aim of this study was to investigate whether edible insects could be measured and distinguished by MALDI-TOF MS (matrix-assisted laser desorption ionization-time of flight mass spectrometry). Therefore, different kinds of edible insects (buffalo worms, mealworms, crickets and grasshoppers) were purchased via online shops and ground subsequently. The insect powder was extracted by vigorously shaking in diluted formic acid and measured by MALDI-TOF MS. The measurement provided reproducible as well as specific mass spectra and enabled a precise differentiation of the different species.}}, author = {{Ulrich, Sebastian and Kühn, Ulrike and Biermaier, Barbara and Piacenza, Nicolo and Schwaiger, Karin and Gottschalk, Christoph and Gareis, Manfred}}, booktitle = {{Food Control}}, issn = {{0956-7135}}, keywords = {{MALDI-TOF MS, Mass spectrometry, Edible insects, Authenticity, Food quality}}, number = {{6}}, pages = {{96--101}}, publisher = {{Elsevier}}, title = {{{Direct identification of edible insects by MALDI-TOF mass spectrometry}}}, doi = {{10.1016/j.foodcont.2017.01.010}}, volume = {{76}}, year = {{2017}}, } @phdthesis{13452, abstract = {{Im Rahmen dieser Arbeit wird die konstruktive Auslegung von Steckverbindern hinsichtlich der Stromtragfähigkeit untersucht. Zunächst werden bekannte analytische Modelle aus verschiedenen physikalischen Phänomenen (mechanische, elektrische, thermische und kontaktphysikalische) miteinander kombiniert, um die Stromerwärmung von Steckverbinderkontakten incl. der angeschlossenen Leitung analytisch zu berechnen. Die Modelle werden mit Hilfe von Experimenten und FE-Analysen verifiziert. Anschließend werden die analytischen Modelle umgeformt, um wichtige Fragestellungen bei der konstruktiven Auslegung von Steckverbinderkontakten zu berechnen. Dazu zählen unter anderem der maximal zulässige Durchgangswiderstand von Steckverbinderkontakten, der Zusammenhang zwischen Durchgangswiderstand und Stromerwärmung, sowie die optimale Anzahl an Kontaktfedern für einen Steckverbinderkontakt. Zudem werden Sensitivitätsanalysen durchgeführt, um den Einfluss konstruktionsrelevanter Parameter auf die Stromerwärmung von Steckverbinderkontakten darzustellen. Durch die gewonnenen Ergebnisse wird schließlich ein Vorgehen zur systematischen Auslegung von Steckverbinderkontakten hinsichtlich der Stromtragfähigkeit erarbeitet. Dieses nutzt analytische Modelle (parametrisierte Modelle), mit denen sich wesentliche geometrische Abmessungen und Werkstoffkennwerte berechnen lassen. Dadurch können Baureihen von Steckverbinderkontakten entwickelt werden, die einer einheitlichen Methodik folgen, eine Überdimensionierung vermeiden und sich für verschiedene Stromstärken skalieren lassen. Die Arbeit stellt damit einen Ansatz zur parametrischen Konstruktion von Steckverbindern dar.}}, author = {{Blauth, Michael}}, isbn = {{978-3-86360-155-3}}, pages = {{221}}, publisher = {{Universitätsverlag Ilmenau}}, title = {{{Parametrisierte Modelle zur konstruktiven Auslegung optimierter elektrischer Steckverbinderkontakte}}}, volume = {{18 (28.03.2017)}}, year = {{2017}}, }