@inproceedings{10226,
  abstract     = {{This paper presents a bidirectional optical data transmission system as an enhancement of a contactless power transmission system (CPTS). The latter consists of two separate devices and is able to transmit up to 240W of electrical power using inductive resonant coupling. The optical system consists of two self-developed light-guiding structures and a short-reach free-space optical path. As source and sink of the optical system a light-emitting diode resp. a photodiode with a centroid wavelength of 850nm are used. The optical system is positioned within the CPTS; it transmits the PROFIBUS protocol. Due to the restrictions given by the applications areas of the CPTS, such as air gap up to 5°mm, misalignment up to 2 mm, tilting up to 5 and rotation angle up to 360°, different kinds of light-guiding structures are analyzed by simulation. Based on these results the most promising structures are selected and manufactured. Hereafter the attenuation and the near field characteristic of one light-guiding structure is analyzed. After this, the attenuation based on misalignment, variation of air gap, tilting and rotation between two light-guiding structures are analyzed by measurement. To check whether the requirements of the PROFIBUS has been satisfied by the complete data transmission system, the transient transmission behavior of the system was analyzed by a pseudo-random bit stream. In this paper the most important results of the design, the simulation and the measurement are explained. The presented results demonstrate the ability to design of such systems based on simulations and to evaluate the suitability of various geometries for present and future works.}},
  author       = {{Neu, Marc and Grünberg, Olaf and Christophliemke, Tobias and Stübbe, Oliver}},
  booktitle    = {{Optical Interconnects XVII}},
  editor       = {{Schröder, Henning and Chen, Ray T.}},
  issn         = {{0277-786X}},
  location     = {{San Francisco}},
  publisher    = {{SPIE}},
  title        = {{{Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications}}},
  doi          = {{10.1117/12.2251014}},
  volume       = {{10109}},
  year         = {{2017}},
}

@misc{10228,
  abstract     = {{In diesem Beitrag werden die Störeinflüsse für optische Freiraumkommunikation in industriellen Produktionsumgebungen empirisch analysiert und ein Modellierungsansatz abgeleitet. Um drahtlose Kommunikationstechnologien einzusetzen, sind erhebliche Resistenzen gegenüber Störeinflüssen erforderlich, die Visible Light Communication (VLC) bis heute nicht vollständig erfüllt. Anhand von empirischen Messreihen wird in diesem Beitrag nachgewiesen, dass bei der Systemauslegung von VLC, anders als bisher, unterschiedliche Störquellen zu berücksichtigen sind, die orts- und zeitvariante Eigenschaften haben. Auf empirischen Untersuchungen basierend, wird eine alternative Berechnung der gesamten Störquellenleistung vorgeschlagen, die unmittelbar Auswirkung auf das Signal-Rausch-Verhältnis (SNR) und die maximal verfügbare Kanalkapazität hat. Der vorgestellte Ansatz dient dazu VLC-Systeme auch für industrielle Produktionsumgebungen auslegen zu können.}},
  author       = {{Schneider, Daniel and Flatt, Holger and Jasperneite, Jürgen and Stübbe, Oliver}},
  booktitle    = {{Komma 2017 : Kommunikation in der Automation : 14.-15.11.2017 : 8. Jahreskolloquium "Kommunikation in der Automation"}},
  editor       = {{Jumar, Ulrich and Jasperneite, Jürgen}},
  isbn         = {{978-3-944722-63-4}},
  location     = {{Magdeburg}},
  publisher    = {{ Institut für Automation und Kommunikation e.V. Magdeburg, An-Institut der Otto-von-Guericke-Universität Magdeburg }},
  title        = {{{Entwurf eines Kanalmodells für Visible Light Communication in dynamischen, industriellen Umgebungen}}},
  year         = {{2017}},
}

@proceedings{10634,
  editor       = {{Rubart, Jessica and Yesilada, Yeliz}},
  location     = {{Prague, Czech Republic}},
  publisher    = {{CEUR-WS.org}},
  title        = {{{Hypertext 2017 Extended Proceedings}}},
  year         = {{2017}},
}

@article{10662,
  author       = {{Latos, Benedikt and Holtkötter, Christoph and Brinkjans, Jan and Kalantar, Peyman and Przybysz, Philipp M. and Mütze-Niewöhner, Susanne}},
  issn         = {{2366-4681}},
  journal      = {{Zeitschrift für Arbeitswissenschaft}},
  keywords     = {{General Medicine}},
  number       = {{1}},
  pages        = {{90--98}},
  publisher    = {{Springer}},
  title        = {{{Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie}}},
  doi          = {{10.1007/s41449-017-0081-8}},
  volume       = {{72}},
  year         = {{2017}},
}

@article{10663,
  author       = {{Latos, Benedikt and Holtkötter, Christoph and Brinkjans, Jan and Kalantar, Peyman and Przybysz, Philipp M. and Mütze-Niewöhner, Susanne}},
  issn         = {{0340-2444}},
  journal      = {{Zeitschrift für Arbeitswissenschaft}},
  keywords     = {{General Medicine}},
  number       = {{1}},
  pages        = {{90--98}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie}}},
  doi          = {{10.1007/s41449-017-0081-8}},
  volume       = {{72}},
  year         = {{2017}},
}

@inproceedings{10669,
  author       = {{Latos, Benedikt and Kalantar, Peyman and Przybysz, Philipp and Mütze-Niewöhner, Susanne and Holtkötter, Christoph and Brinkjans, Jan}},
  booktitle    = {{	 Modelling and simulation 2017 : the European Simulation and Modelling Conference 2017 : ESM'2017 : October 25-27, 2017, Lisbon, Portual }},
  editor       = {{ Gonçalves, Paulo J.S.}},
  isbn         = {{978-492859-00-6 (Formal falsche ISBN)}},
  location     = {{Lisbon, Portugal}},
  pages        = {{162--166}},
  publisher    = {{EUROSIS-ETI}},
  title        = {{{Simulation of a Flexible and Adaptable One-Piece-Flow Assembly Line Based on a Process Flow of Colored and Timed Petri Nets}}},
  year         = {{2017}},
}

@inproceedings{10670,
  author       = {{Latos, Benedikt and Holtkötter, Christoph and Brinkjans, Jan and Przybysz, Philipp and Mütze-Niewöhner, Susanne and Schlick, Christopher}},
  booktitle    = {{Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017}},
  isbn         = {{9783936804225}},
  location     = {{FHNW Brugg-Windisch, Schweiz}},
  publisher    = {{GfA-Press}},
  title        = {{{Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie bei einem Hersteller von weißer Ware}}},
  year         = {{2017}},
}

@inproceedings{10671,
  author       = {{Latos, Benedikt and Harlacher, Markus and El-Mahgary, Mochtar and Götzelmann, Daniela and Przybysz, Philipp and Mütze-Niewöhner, Susanne and Schlick, Christopher}},
  booktitle    = {{Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017 }},
  isbn         = {{9783936804225}},
  location     = {{FHNW Brugg-Windisch, Schweiz}},
  publisher    = {{GfA-Press}},
  title        = {{{Komplexität in Arbeitssystemen: Analyse und Ordnung von Beschreibungsansätzen aus unterschiedlichen Disziplinen}}},
  year         = {{2017}},
}

@proceedings{1102,
  abstract     = {{Since 2000 (in the beginning 21st Century) climate change and globalisation have influenced the actual
world and all societies tremendously and the have also affected the way we are building. Safety and
security requirements are increasing and are consequently influencing the design of the building envelope.
‘Resilience’ describes the function and ability of buildings and their facades to to recover from or adjust
easily to change. “Resilience” addresses the impacts of climate change and globalization and of safety and security requirements on the building envelope. The first edition of the Detmold Conference Week 2017 connects education and research, scholars and professionals in different events and formats: a master workshop and two conferences will discuss the approaches of resilient design and construction for buildings and facades.
The direct way to specific stresses forced by water, wind, fire, explosion or earthquake but also in an indirect way seen as a general ability of adaptivity to different changes will be discussed at the facade2017 conference on Friday 24th November 2017 from different academic and professional perspectives.
The 1st RMB Conference on Thursday 23rd November 2017 is organized by the consortium of the ERASMUS+ 
project “RMB: Reuse of Modernist Buildings. Design Tools for Sustainable Transformations”. There representatives of the consortium as well as international guest will debate in particular issues of Resilience of Modern Movement Buildings and Neighborhoods. During the conference we will discuss new design and educational concepts for the reuse of modern postwar buildings for housing and other purposes – resilience through reuse. Scholars, PhD and master students present and discuss selected papers and posters.}},
  editor       = {{Melenhorst, Michael and Pottgiesser, Uta and Naumann, Christine and Kellner, Theresa}},
  isbn         = {{978-3-939349-27-3}},
  location     = {{Detmold}},
  pages        = {{349}},
  title        = {{{Detmold Conference Week 2017}}},
  doi          = {{10.25644/5sg5-zf09}},
  year         = {{2017}},
}

@inbook{261,
  abstract     = {{Learning retention is improved when in addition to the learning methods of “classical” instruction (auditory, visual), further learning channels (discussing, doing) are addressed. In view of this, the coursework for the degree in Industrial Engineering has been designed to include teaching formats with a high level of interaction among students. In keeping with this teaching approach, an additional business game was developed for the Production Systems module. This game provides knowledge about the structure of the logistical workflow within production in general and the Kanban method in particular. The first step in designing the game was to define learning objectives. Based on these, a basic concept was derived. This basic concept applies the guideline for the introduction of Kanban by Geiger et al. (2011). The detailed concept was then worked out over the course of further development, leading to the design of an assembly line for Lego cars as well as the design of tasks on the subject of Kanban capability and for calculating the number of Kanban. The business game illustrates, inter alia, the difference between the Kanban method and a conventional production planning and control system. The simulation has been tested in a university course, evaluated and, in response to the positive feedback from students, integrated in the course instruction. The conclusion of the paper provides an outlook on the further development of instruction in the context of the digitization and networking of production.}},
  author       = {{Brown, David and Hinrichsen, Sven and Paris, Melissa}},
  booktitle    = {{Advances in Ergonomic Design of Systems, Products and Processes}},
  editor       = {{Schlick, Christopher Marc  and Duckwitz ,  Sönke and Flemisch ,  Frank and Frenz, Martin and Kuz, Sinem and Mertens, Alexander and Mütze-Niewöhner, Susanne}},
  isbn         = {{978-3-662-53304-8}},
  location     = {{Aachen}},
  pages        = {{103--114}},
  publisher    = {{Spinger}},
  title        = {{{Development of a Business Game for Teaching the Kanban Method}}},
  doi          = {{10.1007/978-3-662-53305-5}},
  year         = {{2017}},
}

@inproceedings{262,
  abstract     = {{Die Anforderungen an die Gestaltung von Montagesystemen verändern sich. Dazu tragen sich verkürzende Innovations- und Produktlebenszyklen sowie eine zunehmende Variantenvielfalt bei, mit der eine Montage von kleinen Losen bis hin zur kundenindividuellen Montage einhergeht. Den aktuellen Anforderungen an Montagesysteme steht die Weiterentwicklung der technologischen Möglichkeiten zur Gestaltung von manuellen und hybriden Montagesystemen gegenüber. Die große Anzahl der am Markt verfügbaren Assistenzsysteme für die Montage erschwert den Prozess der Auswahl und Konfiguration eines anforderungsgerechten Assistenzsystems. Daher zielt der vorliegende Beitrag darauf ab, aufbauend auf begrifflichen Grundlagen eine Klassifikation der Montageassistenzsysteme vorzunehmen und damit den Auswahlprozess zu unterstützen.}},
  author       = {{Hinrichsen, Sven and Riediger, Daniel and Unrau, Alexander}},
  booktitle    = {{Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. }},
  isbn         = {{978-3-936804-22-5}},
  location     = {{Brugg-Windisch, Switzerland}},
  number       = {{30}},
  publisher    = {{GfA-Press}},
  title        = {{{Entwicklung und Auswahl von Montageassistenzsystemen}}},
  year         = {{2017}},
}

@article{2620,
  author       = {{Nolte, T. and Hölscher, Maike and Upmann, Matthias and Zapp, Jürgen}},
  journal      = {{Deutsche Lebensmittel-Rundschau}},
  number       = {{1}},
  pages        = {{17--21}},
  title        = {{{Fehlaromen in der Ebermast. Ebergeruchsanalytik im Vergleich}}},
  volume       = {{113}},
  year         = {{2017}},
}

@inproceedings{2621,
  author       = {{Upmann, Matthias}},
  location     = {{Schwelentrup}},
  title        = {{{Schnitzel & Co - Auslaufmodelle der Ernährung?}}},
  year         = {{2017}},
}

@inproceedings{2622,
  author       = {{Upmann, Matthias and Lautenschläger, Ralf}},
  location     = {{Düsseldorf}},
  title        = {{{Fleisch vom Bruderhahn - einsetzbar und zielführend für hochwertige Fleischerzeugnisse?}}},
  year         = {{2017}},
}

@inproceedings{2623,
  author       = {{Nolte, T. and Hölscher, Maike and Upmann, Matthias and Zapp, Jürgen}},
  location     = {{Bad Salzuflen}},
  title        = {{{Detektion von Ebergeruchsstoffen - analytisch chemische Aspekte}}},
  year         = {{2017}},
}

@inproceedings{2624,
  author       = {{Hölscher, Maike and Nolte, T. and Zapp, Jürgen and Stiebing, Achim and Lautenschläger, Ralf and Upmann, Matthias}},
  location     = {{ Bad Salzuflen}},
  title        = {{{Verarbeitung von Eberfleisch - Möglichkeiten und Grenzen}}},
  year         = {{2017}},
}

@article{2625,
  author       = {{Weyland, Gerd and Upmann, Matthias}},
  issn         = {{0015-363x}},
  journal      = {{Fleischwirtschaft}},
  number       = {{7}},
  pages        = {{60--64}},
  title        = {{{Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost}}},
  volume       = {{97}},
  year         = {{2017}},
}

@article{2626,
  author       = {{Weyland, Gerd and Upmann, Matthias}},
  issn         = {{0015-363x}},
  journal      = {{Fleischwirtschaft}},
  number       = {{8}},
  pages        = {{44--50}},
  title        = {{{Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost}}},
  volume       = {{97}},
  year         = {{2017}},
}

@inproceedings{2627,
  author       = {{Fencher, T. and Upmann, Matthias}},
  location     = {{Garmisch-Partenkirchen}},
  title        = {{{Digitale Knochenpartikelanalyse}}},
  year         = {{2017}},
}

@inproceedings{2628,
  author       = {{Fencher, T. and Röser, Anja and Upmann, Matthias}},
  location     = {{Garmisch-Partenkirchen}},
  title        = {{{Histologische Knochenpartikelfärbungen im Vergleich – Genauigkeit von Alizarin, Kossa und Co. }}},
  year         = {{2017}},
}

@inproceedings{2629,
  author       = {{Upmann, Matthias and Langen, M.}},
  location     = {{Berlin}},
  title        = {{{Separation von Fleischstandards. Anforderungen an Ausgangsmaterial, Prozesse und Produkte}}},
  year         = {{2017}},
}

@article{263,
  author       = {{Hinrichsen, Sven and Riediger, Daniel and Unrau, Daniel}},
  journal      = {{REFA Blog - Informations- und Kommunikationsmedium von REFA}},
  title        = {{{Anforderungsgerechte Gestaltung von Montageassistenzsystemen}}},
  year         = {{2017}},
}

@article{2631,
  author       = {{Lautenschläger, Ralf and Upmann, Matthias}},
  journal      = {{Animal Frontiers}},
  pages        = {{2--4}},
  title        = {{{How meat is defined in the European Union and in Germany}}},
  volume       = {{1}},
  year         = {{2017}},
}

@inproceedings{2633,
  author       = {{Upmann, Matthias}},
  location     = {{Bochum}},
  title        = {{{Verarbeitung von Eberfleisch. Auswirkungen auf die Qualität von Fleischprodukten}}},
  year         = {{2017}},
}

@inproceedings{2635,
  author       = {{Upmann, Matthias}},
  location     = {{ Neuchâtel }},
  title        = {{{Muscle cell integrity – crucial for meat product quality?}}},
  year         = {{2017}},
}

@inproceedings{2638,
  author       = {{Upmann, Matthias and Lautenschläger, Ralf}},
  location     = {{Lemgo}},
  title        = {{{Qualitätsprodukte aus dem Fleisch von Bruderhähnen - Realität oder Fiktion?}}},
  year         = {{2017}},
}

@inproceedings{265,
  abstract     = {{The maintenance of a tool for injection molding or forming is usually accompanied by its disassembly and assembly. The duration of the assembly activities is often a large part of the total activity time for the maintenance of the tool. The degree of performance of the employees in the execution of these disassembly and assembly activities is often low. In addition, allowances occur (e.g. searching for work equipment). At the Industrial Engineering Lab of the Ostwestfalen-Lippe University of Applied Sciences, a prototype of an assistance system was developed to support the assembly activities in toolmaking. With the help of this system, the operator is guided step by step through the assembly process. The economic potential of the system exists in the reduction of training times, the avoidance of assembly errors and the increase of labor productivity.}},
  author       = {{Hinrichsen, Sven and Riediger, Daniel and Unrau, Alexander}},
  booktitle    = {{2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)}},
  isbn         = {{978-1-5386-0948-4 }},
  keywords     = {{injection moulding, machine tools, maintenance engineering, productivity, projection-based assistance system, injection molding tools, assembly activities, assembly process, assembly errors, tool maintenance, disassembly activities, economic potential, Industrial Engineering Lab, Ostwestfalen-Lippe University of Applied Sciences, toolmaking, Tools, Injection molding, Maintenance engineering, Usability, Task analysis, Workstations, Morphology, assembly assistance systems, assistance systems, maintenance of injection molding tools, manual assembly}},
  location     = {{Singapore}},
  number       = {{1}},
  pages        = {{1571--1575}},
  title        = {{{Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools}}},
  doi          = {{https://doi.org/10.1109/IEEM.2017.8290157}},
  year         = {{2017}},
}

@inproceedings{267,
  abstract     = {{Sich verkürzende Innovations- und Produktlebenszyklen sowie eine zunehmende Variantenvielfalt verbunden mit kleineren Losgrößen bis hin zur kundenindividuellen Produktkonfiguration führen zu veränderten Anforderungen an die Gestaltung von Montagesystemen. Gleichzeitig bieten technologische Entwicklungen auf dem Gebiet der Assistenzsysteme neue Gestaltungsmöglichkeiten, Beschäftigte bei der Ausführung ihrer Arbeitsprozesse zu unterstützten. Der vorliegende Beitrag zeigt anhand eines Fallbeispiels, eines Montagearbeitsplatzes aus der SmartFactoryOWL in Lemgo, wie ein Montagearbeitsplatz über Assistenzfunktionen weiter entwickelt wurde und welche Auswirkungen diese Entwicklungen auf die Arbeit haben. Der Arbeitsplatz wurde im Rahmen eines Kooperationsprojektes des Labors für Industrial Engineering der Hochschule Ostwestfalen-Lippe und der Unternehmen Turck und Brandt Kantentechnik in der SmartFactory-OWL realisiert. Er verfügt über ein Assistenzsystem, welches dem Monteur auftrags- und arbeitsschrittbezogene Informationen bereitstellt. Das System besteht maßgeblich aus einem Pick-to-light System verbunden mit einem Touchscreen zur Visualisierung der Informationen. Der Montageauftrag wird über eine RFID-Applikation angemeldet. Damit lassen sich neue Produktvarianten flexibel hinzufügen und bestehende ändern. Zudem können die über Sensoren erfassten Daten zu Kennzahlen aggregiert und entsprechend der Anforderungen der Nutzer visualisiert werden. Im Rahmen des Beitrages werden die Auswirkungen dieser technologischen Weiterentwicklungen auf die Arbeit erörtert.}},
  author       = {{Kleineberg, Tim and Hinrichsen, Sven and Niggemann, Oliver}},
  booktitle    = {{Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V.}},
  isbn         = {{978-3-936804-22-5}},
  location     = {{Brugg-Windisch}},
  number       = {{30}},
  publisher    = {{GfA-Press}},
  title        = {{{Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage}}},
  year         = {{2017}},
}

@book{2682,
  author       = {{Ernesti, Werner and Holch, Heinrich and Kattenbusch, Markus and Keren, Franz and Klein, Hilmar and Kuhlenkamp, Dieter and Kuhne, Volker and Neuenhagen, Helmhard and Noosten, Dirk and Ohland, Edgar and Stiglocher, Hans and Kugelmann, Adolf}},
  isbn         = {{978-3-481-03247-0}},
  pages        = {{556}},
  publisher    = {{Müller}},
  title        = {{{Plümecke – Preisermittlung für Bauarbeiten}}},
  year         = {{2017}},
}

@book{2773,
  author       = {{Vetter, Andreas}},
  isbn         = {{3766722832}},
  publisher    = {{Callwey}},
  title        = {{{Die besten Einfamilienhäuser aus Beton}}},
  year         = {{2017}},
}

@article{2885,
  author       = {{Kutz, Gerd}},
  issn         = {{0938-2216}},
  journal      = {{Haut}},
  number       = {{6}},
  pages        = {{324--329}},
  publisher    = {{WPV, Wirtschafts- und Praxisverlag GmbH }},
  title        = {{{Zur Galenik topischer Lichtschutzmittel  Haut}}},
  volume       = {{XXVVIII}},
  year         = {{2017}},
}

@misc{2920,
  author       = {{Hernández Rodriguez, Tanja and Kern, S. and Platas Barradas, O. and Pörtner, R. and Frahm, Björn}},
  location     = {{Lemgo, Germany}},
  title        = {{{Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren}}},
  year         = {{2017}},
}

@misc{2921,
  author       = {{Pörtner, R. and Möller, J. and Hernández Rodriguez, Tanja and Frahm, Björn and Hass, V. C.}},
  location     = {{Neu-Ulm, Germany}},
  title        = {{{Model-assisted design and optimization of biotechnological processes}}},
  year         = {{2017}},
}

@misc{2950,
  author       = {{Hernández Rodriguez, Tanja and Koopmann, K. S. and Klaes, J. and Kern, S. and Platas Barradas, O. and Pörtner, R. and Frahm, Björn}},
  location     = {{Munic, Germany}},
  title        = {{{Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren}}},
  year         = {{2017}},
}

@misc{2994,
  author       = {{Hernández Rodriguez, Tanja and Koopmann, K. S. and Pörtner, R. and Frahm, Björn}},
  location     = {{Recklinghausen, Germany}},
  title        = {{{Influence of parameter accuracies in cell culture seed train simulations}}},
  year         = {{2017}},
}

@misc{2995,
  author       = {{Hernández Rodriguez, Tanja and Krull, S. and Hass, V. C. and Möller, J. and Pörtner, R. and Frahm, Björn}},
  location     = {{Lausanne, Switzerland}},
  title        = {{{Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization}}},
  year         = {{2017}},
}

@misc{2996,
  author       = {{Hernández Rodriguez, Tanja and Krull, S. and Hass, V. C. and Pörtner, R. and Frahm, Björn}},
  location     = {{Neu-Ulm, Germany}},
  title        = {{{Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization}}},
  year         = {{2017}},
}

@book{3033,
  author       = {{Austermann-Haun, Ute and Felber, H.}},
  isbn         = {{978-3-88721-522-4}},
  publisher    = {{Hirthammer}},
  title        = {{{Abwasser Grundkurse}}},
  year         = {{2017}},
}

@article{3057,
  author       = {{Meier, J. F. and Austermann-Haun, Ute and Fettig, Joachim and Liebe, H. and Wichern, M.}},
  journal      = {{Water Science & Technology}},
  number       = {{8}},
  pages        = {{2065 -- 2074}},
  title        = {{{Operation of anaerobic filter compared with an anaerobic moving bed bioreactor for the treatment of waste water from hydrothermal carbonization of fine mulch}}},
  volume       = {{76}},
  year         = {{2017}},
}

@proceedings{309,
  abstract     = {{It is our pleasure to introduce the seventh edition of the International Conference on Production Engineering and Management (PEM), an event that is the result of the joint effort of the University of Trieste and the Ostwestfalen-
Lippe University of Applied Sciences. The conference has been established as an annual meeting under the Double Degree Master Program “Production Engineering and Management” by the two partner universities. This year the conference is hosted at the university campus in Pordenone. The main goal of the conference is to offer students, researchers and professionals in Germany, Italy and abroad, an opportunity to meet and exchange information, discuss experience, specific practices and technical solutions for planning, design and management of manufacturing and service systems and processes. As always, the conference is a platform aimed at presenting research projects, introducing young academics to the tradition of symposiums and promoting the exchange of ideas between the industry and the academy. This year’s special focus is on industry sustainability, which is currently a major topic of discussion among experts and professionals. Sustainability can be considered as a requirement for any modern production processes and systems, and also has to be embedded in the context of Industry 4.0. In fact, the features and problems of industry 4.0 have been widely discussed in the last editions of the PEM conference, in which efficiency and waste reduction emerged as key factors. The study and development of the connections between future industry and sustainability is therefore critical, as highlighted in the recent “German Sustainable Development Strategy and the 2030 Agenda”. Accordingly, the seventh edition of the PEM conference aims to offer a contribution to the debate. The conference program includes 25 speeches organized in six sessions. Three are specifically dedicated to “Direct Digital Manufacturing in the context of Industry 4.0” and “Technology and Business for Circular Economy and Sustainable Production”. The other sessions are covering areas of great interest and importance to the participants of the conference, which are related to the main focus: “Innovative Management Techniques and Methodologies”, “Industrial Engineering and Lean Management” and “Wood Processing Technologies and Furniture Production”. The proceedings of the conference include the articles submitted and accepted after a careful double-blind refereeing process.}},
  editor       = {{Padoano, Elio and Villmer, Franz-Josef}},
  isbn         = {{978-3-946856-01-6}},
  location     = {{Pardenone, Italy}},
  number       = {{.}},
  pages        = {{248}},
  title        = {{{Production Engineering and Management}}},
  year         = {{2017}},
}

@inproceedings{3181,
  author       = {{Austermann-Haun, Ute}},
  location     = {{Ilsede Peine}},
  title        = {{{Spurenstoffelimination mit Ozon und Aktivkohle}}},
  year         = {{2017}},
}

@inproceedings{3182,
  author       = {{Austermann-Haun, Ute}},
  location     = {{Mellendorf}},
  title        = {{{Grundlagen der biologischen Abwasserreinigung und Stickstoffelimination in Kläranlagen}}},
  year         = {{2017}},
}

@inproceedings{3184,
  author       = {{Austermann-Haun, Ute}},
  location     = {{Gelsenkirchen}},
  title        = {{{Anpassung der Kläranlagen an demographischen Wandel}}},
  year         = {{2017}},
}

@inproceedings{328,
  abstract     = {{In  this  paper,  concepts  for  an  extended  DC network for the main power supply of components from various manufacturers in industrial production are presented. In the first part,  detailed  requirements  for  such  a  network  are  given  from the  viewpoint  of  a  customer.  Based  on  those,  different  concepts for AC/DC conversion and energy management are discussed. As far  as  AC/DC  conversion  is  concerned,  the  advantages  and drawbacks of several rectifier topologies are listed, as they have a significant  impact  on  the  system  behavior  and  EMC  properties. 
An  intelligent  energy  management  can  improve  the  energy efficiency  and  reduce  downtimes  of  a  plant,  which  are  major requirements from a customer’s viewpoint. }},
  author       = {{Borcherding, Holger and Austermann, Johann and Kuhlmann, Timm and Weis, Benno and Leonide, Andre}},
  booktitle    = {{2017 IEEE Second International Conference on DC Microgrids (ICDCM)}},
  keywords     = {{AC-DC power convertors, electromagnetic compatibility, energy conservation, energy management systems, rectifiers, main power supply, industrial production, DC network, AC-DC conversion, rectifier topologies, EMC properties, intelligent energy management, energy efficiency improvement, downtime reduction, Rectifiers, Switches, Voltage control, Topology, Network topology, Production, Grounding, industrial DC grid, SMART Grid}},
  location     = {{Nürnberg}},
  number       = {{1}},
  pages        = {{227--234}},
  title        = {{{Concepts for a DC Network in Industrial Production}}},
  doi          = {{10.1109/ICDCM.2017.8001049}},
  year         = {{2017}},
}

@inproceedings{3326,
  author       = {{Kutz, Gerd}},
  location     = {{Nürnberg}},
  title        = {{{Überwachung von Schmelz- und Feuchtgranulationsprozessen in Intensivmischern mit Hilfe der Parsum-Sonde}}},
  year         = {{2017}},
}

@inproceedings{3329,
  author       = {{Kutz, Gerd}},
  booktitle    = {{Teil 11: Symposium der GD Task Force „Licht.Hautkrebs.Prävention“: Prävention von hellem Hautkrebs im privaten und im beruflichen Bereich}},
  location     = {{München}},
  title        = {{{Galenik von aktuellen topischen Lichtschutzmitteln}}},
  year         = {{2017}},
}

@book{4506,
  abstract     = {{In diesem Tagungsband sind die besten Beiträge des 7. Jahreskolloquiums "Kommunikation in der Automation" (KommA 2016) und des  5. Jahreskolloquiums "Bildverarbeitung in der Automation" (BVAu 2016) enthalten. Die Kolloquien fanden am 30. November und 1. Dezember 2016 anlässlich des 10jährigen Jubiläums des inIT - Institut für industrielle Informationstechnik in der SmartFactoryOWL, einer herstellerunabhängigen und offenen Industrie 4.0 Forschungs- und Demonstrationsplattform und zugleich Testfeld für den Mittelstand, in Lemgo statt.
Die vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen Kommunikationstechnik und Bildverarbeitung erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen enthaltenen anschauliche Anwendungsbeispiele aus dem Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug.}},
  editor       = {{Jasperneite, Jürgen and Lohweg, Volker}},
  isbn         = {{978-3-662-55231-5}},
  keywords     = {{Industrielle Kommunikationstechnik, Industrielle Bildverarbeitung, network reliability and redundancy methods, Networked Controls Systems, wireless real-time communication, quality control, reliability, safety and risk}},
  location     = {{Lemgo}},
  pages        = {{295}},
  publisher    = {{Springer Vieweg}},
  title        = {{{ Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik}}},
  doi          = {{10.1007/978-3-662-55232-2}},
  volume       = {{7}},
  year         = {{2017}},
}

@inproceedings{4507,
  author       = {{Dürkop, Lars and Jasperneite, Jürgen}},
  booktitle    = {{Handbuch Industrie 4.0 Bd.2}},
  pages        = {{59--71}},
  publisher    = {{Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) }},
  title        = {{{„Plug Produce“ als Anwendungsfall von Industrie 4.0}}},
  year         = {{2017}},
}

@inproceedings{4579,
  author       = {{Dürkop, Lars and Jasperneite, Jürgen}},
  booktitle    = {{Handbuch Industrie 4.0 Bd.2}},
  pages        = {{59--71}},
  publisher    = {{Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) }},
  title        = {{{„Plug Produce“ als Anwendungsfall von Industrie 4.0}}},
  year         = {{2017}},
}

@inproceedings{4580,
  author       = {{Ehrlich, Marco and Biendarra, Alexander and Trsek, Henning and Wojtkowiak, Emanuel and Jasperneite, Jürgen}},
  booktitle    = {{Kommunikation in der Automation - KommA 2017}},
  title        = {{{Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation}}},
  year         = {{2017}},
}

@inproceedings{4581,
  author       = {{Schriegel, Sebastian and Pieper, Carsten and Gamper, Sergej and Biendarra, Alexander and Jasperneite, Jürgen}},
  booktitle    = {{Kommunikation in der Automation - KommA 2017}},
  title        = {{{Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports}}},
  year         = {{2017}},
}

@inproceedings{4582,
  author       = {{Mytych, Martin Jan and Wisniewski, Lukasz and Jasperneite, Jürgen}},
  booktitle    = {{Kommunikation in der Automation - KommA 2017}},
  title        = {{{Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation}}},
  year         = {{2017}},
}

@article{4583,
  author       = {{Pieper, Carsten and Kobzan, Thomas and Schriegel, Sebastian and Jasperneite, Jürgen}},
  journal      = {{Kommunikation in der Automation - KommA 2017}},
  title        = {{{LoRaWAN-basierte IoT-Infrastruktur}}},
  year         = {{2017}},
}

@article{4584,
  author       = {{Schumacher, Markus and Wisniewski, Lukasz and Schriegel, Sebastian and Jasperneite, Jürgen}},
  journal      = {{Kommunikation in der Automation - KommA 2015}},
  title        = {{{Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten}}},
  year         = {{2017}},
}

@inproceedings{4585,
  author       = {{Jasperneite, Jürgen}},
  booktitle    = {{Vortrag im Rahmen der OWL-Gespräche der Friedrich-Ebert-Stiftung }},
  title        = {{{Wie verändert Industrie 4.0 Arbeit und Alltag? }}},
  year         = {{2017}},
}

@misc{4588,
  author       = {{Jasperneite, Jürgen and Meier, Uwe and Neumann, Arne and Wiebusch, Nico}},
  booktitle    = {{open automation, Ausgabe 5/2017}},
  pages        = {{50--53}},
  publisher    = {{VDE Verlag}},
  title        = {{{Industrial Wireless: Koexistenz und hybride Systeme}}},
  year         = {{2017}},
}

@article{4589,
  author       = {{Schriegel, Sebastian and Pethig, Florian and Windmann, Stefan and Jasperneite, Jürgen}},
  journal      = {{ Automation 2017, Baden-Baden}},
  title        = {{{PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse}}},
  year         = {{2017}},
}

@article{4592,
  author       = {{Jasperneite, Jürgen}},
  journal      = {{I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf}},
  title        = {{{Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL}}},
  year         = {{2017}},
}

@inproceedings{4593,
  author       = {{Ehrlich, Marco and Trsek, Henning and Wisniewski, Lukasz and Jasperneite, Jürgen}},
  booktitle    = {{22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern}},
  title        = {{{Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks}}},
  year         = {{2017}},
}

@inproceedings{4594,
  author       = {{Henneke, Dominik and Freudenmann, Christian and Wisniewski, Lukasz and Jasperneite, Jürgen}},
  booktitle    = {{22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017)}},
  title        = {{{Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context}}},
  year         = {{2017}},
}

@book{4595,
  author       = {{Pethig, Florian and Schriegel, Sebastian and Maier, Alexander and Otto, Jens and Windmann, Stefan and Böttcher, Björn and Niggemann, Oliver and Jasperneite, Jürgen}},
  isbn         = {{ 978-3-8163-0709-9}},
  publisher    = {{VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.}},
  title        = {{{Industrie 4.0 Communication Guideline Based on OPC UA}}},
  year         = {{2017}},
}

@inproceedings{4596,
  abstract     = {{Electrical and electronic systems have been getting raising importance for innovations in the automotive industry. Networking issues are a key factor in this process since they enable distributed control functions and user interaction bringing together nodes from different vendors. This paper analyses available and emerging network technologies for in-vehicle communication from a requirements driven perspective. It reviews successful network technologies from other application areas regarding a possible deployment in vehicular communication and distinguishes passenger car and commercial vehicle sectors as far as possible. This contribution is oriented to the OSI reference model showing the state of the art and future opportunities at the level of the several communication layers with a focus on physical layer issues and medium access protocols and including information modeling aspects.}},
  author       = {{Neumann, Arne and Mytych, Martin Jan and Wesemann, Derk and Wisniewski, Lukasz and Jasperneite, Jürgen}},
  booktitle    = {{Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings}},
  publisher    = {{Springer International Publishing}},
  title        = {{{Approaches for in-vehicle communication -- an analysis and outlook}}},
  year         = {{2017}},
}

@inproceedings{4597,
  author       = {{Pethig, Florian and Jasperneite, Jürgen}},
  booktitle    = {{20. IFF-Wissenschaftstage in Magdeburg}},
  title        = {{{Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie}}},
  year         = {{2017}},
}

@inproceedings{4598,
  author       = {{Elattar, Mohammad and Friesen, Maxim and Jasperneite, Jürgen}},
  booktitle    = {{26th IEEE International Symposium on Industrial Electronics (ISIE)}},
  title        = {{{Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems}}},
  year         = {{2017}},
}

@inproceedings{4599,
  author       = {{Elattar, Mohammad and Cao, Tong and Wendt, Verena and Jasperneite, Jürgen and Trächtler, Ansgar}},
  booktitle    = {{26th IEEE International Symposium on Industrial Electronics (ISIE)}},
  title        = {{{Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems}}},
  year         = {{2017}},
}

@inproceedings{4600,
  author       = {{Ali Khan, Waqas and Wisniewski, Lukasz and Lang, Dorota and Jasperneite, Jürgen}},
  booktitle    = {{26th IEEE International Symposium on Industrial Electronics (ISIE 2017)}},
  title        = {{{Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service }}},
  year         = {{2017}},
}

@inproceedings{4601,
  author       = {{Ehrlich, Marco and Trsek, Henning and Lang, Dorota and Wisniewski, Lukasz and Wendt, Verena and Jasperneite, Jürgen}},
  booktitle    = {{Automation 2017}},
  pages        = {{1}},
  publisher    = {{VDI}},
  title        = {{{Security Concept for a Cloud-based Automation Service}}},
  year         = {{2017}},
}

@inproceedings{4602,
  abstract     = {{This paper describes an implementation to enable interaction between smart home solutions and Smart Meter Gateways (SMGWs). This is conducted in the example of the approach of the AnyPLACE project to interconnect openHAB with the HAN interface of the SMGW. Furthermore, security issues in the combination of those two realms are addressed, answered and tested so that in addition to the open character of the solution, it is still secure.}},
  author       = {{Freudenmann, Christian and Henneke, Dominik and Kudera, Christian and Kammerstetter, Markus and Wisniewski, Lukasz and Raquet, Christoph and Kastner, Wolfgang and Jasperneite, Jürgen}},
  booktitle    = {{Conference: Smart Energy Research at the crossroads of Engineering, Economics and Computer Science 2017}},
  pages        = {{12}},
  publisher    = {{Springer}},
  title        = {{{Open and Secure: Amending the Security of the BSI Smart Metering Infrastructure to Smart Home Applications via the Smart Meter Gateway}}},
  year         = {{2017}},
}

@inproceedings{4603,
  abstract     = {{Nowadays, industrial networks are characterized by complex architectures of hybrid, wired and wireless segments, combining automation and information technology (IT). Their operation is supported by network management facilities. Network monitoring is a basis for management as it provides the necessary status information. This paper presents an approach to apply a monitoring concept coming from the IT domain for an industrial wireless network as a step towards a uniform monitoring and management of heterogeneous networks.}},
  author       = {{Neumann, Arne and Ehrlich, Marco and Wisniewski, Lukasz and Jasperneite, Jürgen}},
  booktitle    = {{13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (best WIP paper award)}},
  title        = {{{Towards monitoring of hybrid industrial networks}}},
  year         = {{2017}},
}

@inproceedings{4604,
  author       = {{Wollschläger, Martin and Sauter, Thilo and Jasperneite, Jürgen}},
  booktitle    = {{IEEE Industrial Electronics magazine}},
  publisher    = {{IEEE}},
  title        = {{{The Future of Industrial Communication}}},
  year         = {{2017}},
}

@inproceedings{4789,
  author       = {{Bunte, Andreas and Li, Peng and Niggemann, Oliver}},
  booktitle    = {{3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS)}},
  title        = {{{Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems}}},
  year         = {{2017}},
}

@misc{4906,
  author       = {{Borcherding, Holger and Austermann, Johann and Otte, Raphael and Windmann, Stefan and Köster, Markus and Stichweh, Heiko and Grabs, Volker and Ehlich, Martin and Hohnsbein, Thorsten}},
  publisher    = {{TIB Hannover}},
  title        = {{{Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik}}},
  year         = {{2017}},
}

@misc{4907,
  author       = {{Borcherding, Holger and Jerwan, Benjamin}},
  publisher    = {{TIB Hannover}},
  title        = {{{Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik}}},
  year         = {{2017}},
}

@misc{4915,
  author       = {{Borcherding, Holger and Steup, D. and Therolf, M. and Tolksdorf, A.}},
  publisher    = {{TIB Hannover}},
  title        = {{{Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA)}}},
  year         = {{2017}},
}

@misc{4916,
  author       = {{Wettlaufer, Jan and Borcherding, Holger and Hohnsbein, Thorsten}},
  publisher    = {{TIB Hannover}},
  title        = {{{InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: "Integration der störungsarmen Leistungselektronik in Industrieumrichter"}}},
  year         = {{2017}},
}

@misc{4917,
  author       = {{Bolte, S. and Cherkerzova, R.  and Kaiser, Mario and Peters, A.  and Spanier, Patrick and Böcker, J. and Borcherding, Holger}},
  publisher    = {{TIB Hannover}},
  title        = {{{Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld}}},
  year         = {{2017}},
}

@article{5054,
  author       = {{Fettig, Joachim and Pick, Volker and Liebe, H.}},
  journal      = {{Wat. Sci. Tech.}},
  number       = {{9}},
  pages        = {{2056--2063}},
  title        = {{{Particle separation from road runoff by a decentralised lamella system – laboratory tests and experiences in the field}}},
  volume       = {{75 }},
  year         = {{2017}},
}

@article{5055,
  author       = {{Meon, G. and Fettig, Joachim and Phuoc, N.V.}},
  journal      = {{Hydrologie und Wasserbewirtschaftung }},
  number       = {{6}},
  pages        = {{368--369}},
  title        = {{{Forschungskooperation mit Vietnam – das BMBF-Verbundvorhaben EWATEC-COAST}}},
  volume       = {{61}},
  year         = {{2017}},
}

@article{5186,
  author       = {{Iseke, Anja and Pull, Kerstin}},
  issn         = {{0167-4544}},
  journal      = {{Journal of Business Ethics}},
  pages        = {{1113--1133}},
  title        = {{{Female Executives and Perceived Employer Attractiveness: On the Potentially Adverse Signal of Having a Female CHRO Rather Than a Female CFO}}},
  doi          = {{10.1007/s10551-017-3640-1}},
  year         = {{2017}},
}

@article{5188,
  author       = {{Iseke, Anja and Pull, Kerstin}},
  journal      = {{ PersonalQuarterly, Vol. 69 (4)}},
  pages        = {{17--21}},
  title        = {{{Weibliche Nachwuchskräfte gewinnen? Mit Geschlechterstereotypen brechen!}}},
  year         = {{2017}},
}

@inproceedings{5192,
  author       = {{Pottgiesser, Uta and Kirch, Christoph}},
  booktitle    = {{Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al.}},
  isbn         = {{978-0-9928957-5-4}},
  location     = {{Edinburgh, Scotland}},
  pages        = {{4771--4778}},
  title        = {{{Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product}}},
  year         = {{2017}},
}

@inproceedings{5196,
  author       = {{Naumann, Christine and Höhmann, Ulrike and Pottgiesser, Uta}},
  booktitle    = {{Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al.}},
  isbn         = {{978-0-9928957-5-4}},
  location     = {{Edinburgh, Scotland}},
  title        = {{{Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia}}},
  year         = {{2017}},
}

@book{5197,
  author       = {{Knaack, Ulrich and Pottgiesser, Uta}},
  isbn         = {{978-94-92516-87-9}},
  publisher    = {{ TU Delft Open}},
  title        = {{{efnMOBILE 2.0 : efficient envelopes}}},
  year         = {{2017}},
}

@book{5199,
  author       = {{Pottgiesser, Uta and Storgaard, Eva and Van der Schueren, Iris and Wauters, Paul}},
  title        = {{{Mensen op de vlucht = People on the run}}},
  year         = {{2017}},
}

@misc{5362,
  abstract     = {{Seit 2016 erscheint das urbanLab Magazin jährlich als Fachzeitschrift für Stadt- und Regionalplanung mit dem Anspruch Forschung, Lehre und der Praxis in den Planungsdisziplinen des Spannungsfeldes Stadt und Quartier anhand konkreter Themencluster besser zu vernetzen. Wir geben zukunftsweisenden Ideen, Fachbeiträgen, Publikationen und kontroversen Diskussionen eine Plattform und bringen sie unterstützt durch Erkenntnisse aus unserer Forschung auf den Punkt.}},
  booktitle    = {{Die Stadt der Zukunft - Digital, gesund, sozial }},
  editor       = {{Hall, Oliver and Cardinali, Marcel}},
  issn         = {{2566-8919}},
  number       = {{2}},
  title        = {{{urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung}}},
  year         = {{2017}},
}

@article{5396,
  author       = {{Brandenburg, Stefan and Minge, Michael and Cymek, Dietlind Helene and Zeidler, Laura}},
  journal      = {{ Zeitschrift Forschung}},
  pages        = {{101--106}},
  title        = {{{Ethische Aspekte in der Forschung zu Mensch-Maschine-Systemen - Einblicke in die Arbeit einer Ethik-Kommission}}},
  volume       = {{Politik, Strategie, Management 10(3/4)}},
  year         = {{2017}},
}

@article{5397,
  author       = {{Brandenburg, Stefan and Minge, Michael and Cymek, Dietlind Helene}},
  journal      = {{i-com, Journal of Interactive Media}},
  pages        = {{267--273}},
  title        = {{{Common Challenges in Ethical Practice when Testing Technology with Human Participants: Analyzing the Experiences of a Local Ethics Committee}}},
  volume       = {{16(3)}},
  year         = {{2017}},
}

@inproceedings{5574,
  author       = {{Rossmann, Sören and Wolff, V. and Müller, Ulrich and Schneider, Jan}},
  location     = {{Bruchsal}},
  title        = {{{Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen}}},
  year         = {{2017}},
}

@article{5575,
  author       = {{Rossmann, Sören and Wolff, V. and Müller, Ulrich and Schneider, Jan}},
  issn         = {{1866-5195}},
  journal      = {{BrewingScience }},
  number       = {{1-2}},
  pages        = {{31--38}},
  publisher    = {{Carl}},
  title        = {{{Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions}}},
  volume       = {{70}},
  year         = {{2017}},
}

@article{5576,
  author       = {{Broeker, Timo and Hoffarth, Marc and Oppermann, L. and Wolff, V. and Neubauer, Pia Rebecca and Schneider, Jan}},
  journal      = {{BrewingScience}},
  number       = {{3-4}},
  pages        = {{74--84}},
  title        = {{{Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor}}},
  volume       = {{70}},
  year         = {{2017}},
}

@inproceedings{5578,
  author       = {{Rossmann, Sören and Wolff, V. and Müller, Ulrich and Schneider, Jan}},
  location     = {{ Ljubljan (Slovenia}},
  title        = {{{Comparative study of accelerated shelf-life tests  on physical ageing of beverages containing  weighted flavor emulsions}}},
  year         = {{2017}},
}

@inproceedings{5579,
  author       = {{Schneider, Jan and Hoffarth, Marc and Broeker, Timo}},
  location     = {{Ljubljana (Slovenia)}},
  title        = {{{Wet oxidation of spent grains from breweries for the production of fermentable sugars}}},
  year         = {{2017}},
}

@inproceedings{5580,
  author       = {{Broeker, Timo and Hoffarth, Marc and Heikrodt, Klaus and Schneider, Jan}},
  location     = {{Ljubljana (Slovenia)}},
  title        = {{{Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery}}},
  year         = {{2017}},
}

@inproceedings{5581,
  author       = {{Conradi, Florian and Wefing, Patrick}},
  location     = {{Lemgo}},
  title        = {{{Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik}}},
  year         = {{2017}},
}

@inproceedings{5582,
  author       = {{Hoffarth, Marc}},
  location     = {{Lemgo}},
  title        = {{{Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen}}},
  year         = {{2017}},
}

@inproceedings{5583,
  author       = {{Broeker, Timo}},
  location     = {{Lemgo}},
  title        = {{{Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas}}},
  year         = {{2017}},
}

@inproceedings{5584,
  author       = {{Broeker, Timo}},
  location     = {{Gelsenkirchen}},
  title        = {{{bioCONNECT - Wasserstoff und biogenes CO2 im Verbund}}},
  year         = {{2017}},
}

@inproceedings{5585,
  author       = {{Broeker, Timo and Hoffarth, Marc and Heikrodt, Klaus and Schneider, Jan}},
  location     = {{Barcelona/Katalonia}},
  title        = {{{Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery}}},
  year         = {{2017}},
}

@inproceedings{5677,
  author       = {{Minge, Michael and Ivanova, Ekaterina and Lorenz, Katharina and Thüring, Manfred and Krüger, Jörg and Joost, Gesche}},
  pages        = {{870--875}},
  title        = {{{BeMobil: Developing a User-Friendly and Motivating Telesystem for Motor Rehabilitation after Stroke}}},
  year         = {{2017}},
}

@inproceedings{5678,
  author       = {{Ivanova, Ekaterina and Katharina, Lorenz and Schrader, Mareike and Minge, Michael}},
  title        = {{{Developing Motivating Visual Feedback for a Haptic Telesystem for Stroke Rehabilitation}}},
  year         = {{2017}},
}

@inproceedings{5679,
  author       = {{Ivanova, Ekaterina and Minge, Michael and Schmidt, Henning and Thüring, Manfred and Krüger, Jörg}},
  pages        = {{39--43}},
  title        = {{{ User-Centered Design of a Patient's Work Station for Haptic Robot-based Telerehabilitation after Stroke}}},
  year         = {{2017}},
}

@inproceedings{570,
  abstract     = {{Additive manufacturing (AM) has matured rapidly during the last years due to the advancement of AM machines and materials. Nevertheless, the widespread adoption of AM is still challenged by producing parts with reliable quality. The aim of this paper is t o introduce a first approach to apply in-situ monitoring for quality evaluation of produced parts. Based on the monitored data, a model is developed, in order to predict the quality of ready built parts.}},
  author       = {{Scheideler, Eva and Huxol, Andrea and Villmer, Franz-Josef}},
  booktitle    = {{Production Engineeringand Management}},
  editor       = {{Padoano, Elio and Villmer, Franz-Josef}},
  isbn         = {{978-3-946856-01-6}},
  keywords     = {{Nondestructive quality control, Predictive analytics, Metal model, Additive manufacturing}},
  location     = {{Pordenone, Italy}},
  number       = {{1}},
  pages        = {{89--100}},
  title        = {{{Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models}}},
  year         = {{2017}},
}

@inproceedings{5714,
  author       = {{Nolte, Ferry and Guhr, Nadine and Breitner, M.H.}},
  location     = {{Hawaii}},
  title        = {{{Moderation of Enterprise Social Networks - A Literature Review from a Corporate Perspective}}},
  year         = {{2017}},
}

@inproceedings{573,
  abstract     = {{Additive manufacturing (AM) technologies have not only revolutionized product development and design by enabling rapid prototyping. They also gained influence on production in general, mainly because of their direct manufacturing capabilities. In the context of Industry 4.0 and the related process automation, innovative and advanced production technologies with completely new approaches are required [1]. AM technologies contribute to this with their advantages like freedom of design, cost efficient product individualization, and functional integration. On the other hand, AM still shows shortcomings in exploiting its full potential. Most current AM technologies are only applicable for manufacturing with singular materials. In particular, opportunities for processing of optically or electrically conductive materials are still missing. This paper contributes to the advancement of additive manufacturing of two different material variants or even two completely different materials. A special focus is laid on producing a part that combines mechanical with optical or electrical functionalities in one process step. The ultimate goal is to integrate sensor functionalities into an AM object, e.g. strain gauges. Extrusion processes, predominantly Fused Layer Modeling (FLM), are preferred in this research due to their mechanically simple machine setup in which additional functional materials can be adapted easily to the build process. In a first step, the general manufacturability has been evaluated. Thereafter, the resulting optical transmission properties have been analyzed. Especially the attenuation has to remain below a threshold value to accomplish a minimum signal-to-noise ratio.}},
  author       = {{Ehlert, Patrick and Stübbe, Oliver and Villmer, Franz-Josef}},
  booktitle    = {{Production Engineering and Management}},
  editor       = {{Padoano, Elio and Villmer, Franz-Josef}},
  isbn         = {{978-3-946856-01-6}},
  keywords     = {{Additive manufacturing, Embedded optical waveguides, Electrical conductors, Embedded systems, FLM technology, Sensors}},
  location     = {{Pordenone, Italy}},
  number       = {{1}},
  pages        = {{127--136}},
  title        = {{{Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology}}},
  year         = {{2017}},
}

@article{5739,
  abstract     = {{Das Thema Gesundheit wird traditionell eher aus gesundheitswissenschaft- licher und medizinischer Perspektive betrachtet und untersucht. Nun sind es aber Architekten, Stadtplaner und andere planende Disziplinen, die unsere tägliche Lebenswelt formen. Mit dem Ansatz des Human Centered Design, wird diese Verantwortung gewürdigt und Einwirkungen und Auswirkungen der gebauten Umwelt auf den Menschen, auf unsere Gesundheit und auf unser Wohlempfinden aufgezeigt.}},
  author       = {{Cardinali, Marcel}},
  issn         = {{2566-8900}},
  journal      = {{urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung}},
  number       = {{2}},
  pages        = {{28--31}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Human Centered Design. Wie Architektur unser Verhalten beeinflusst}}},
  year         = {{2017}},
}

@inproceedings{574,
  abstract     = {{The increasing industrial digitization is the driver for the fast emergence of many industrial smart products. To stay competitive, the manufacturing companies of these smart products need to optimize their internal lifecycleprocesses. Mainly, they have to converge the software and hardware lifecycleprocesses. However, even if this strategic necessity has been recognized, manufacturing companies struggle to develop and implement a roadmap of such convergence.Starting point for the realization of harmonized lifecycle processes are processmodels describing process activities and the underlying data models. This research addresses the latter one and aims to create a generic lifecycle data model. The research team created and evaluated such data model referring to development artifacts such as requirements, parts or test cases and to lifecycle artifacts such as revisions, versions and baselines. The generic lifecycle management model was evaluated by a practical development of a smart product. By this, the research provides a valuable result to maintain and increase the competitiveness of manufacturing companies.}},
  author       = {{Deuter, Andreas and Otte, Andreas and Ebert, Marcel}},
  booktitle    = {{Production Engineering and Management}},
  editor       = {{Padoano, Elio and Villmer, Franz-Josef}},
  isbn         = {{978-3-946856-01-6}},
  keywords     = {{PLM, ALM, Systems Engineering, VDI guideline 2206}},
  location     = {{Pordenone, Italy}},
  number       = {{1}},
  pages        = {{115--125}},
  title        = {{{Extending the Sliced V-Model to Smart Product Development}}},
  year         = {{2017}},
}

@article{5740,
  abstract     = {{Zweitveröffentlichung in urbanlab Magazin Regionale Netzwerke, 12–15.}},
  author       = {{Hall, Oliver and Cardinali, Marcel}},
  journal      = {{Ideenbuch Wachstum in Kooperation}},
  pages        = {{92--95}},
  publisher    = {{NRW.BANK}},
  title        = {{{ Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb.}}},
  year         = {{2017}},
}

@article{5741,
  author       = {{Hall, Oliver and Cardinali, Marcel}},
  journal      = {{urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung}},
  keywords     = {{Studentischer Ideenwettbewerb}},
  number       = {{2}},
  pages        = {{60--63}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Quartier der Zukunft - Wettbewerbsdokumentation}}},
  year         = {{2017}},
}

@article{5742,
  abstract     = {{Der vorliegende Artikel beleuchtet die Bedeutung von sozial heterogenen Quar- tieren zur Verhinderung von Armutsrepdroduktion. In diesem Zusammenhang werden Unterschiede und Gemeinsamkeiten von Sozialraum und Quartiers- raum bei verschiedenen Gruppen herausgestellt. Daraus folgt, dass insbesonde- re Kinder und Jugendliche von einer heterogenen Quartierszusammensetzung profitieren. Die Analyse der Abläufe und Abhängigkeiten der Problemstellungen im Quartier zeigt schließlich, dass die Interventionspunkte des Programms So- ziale Stadt zwar richtig erkannt wurden, aber allein nicht geeignet sind einen Weg aus der Daueraufgabe Soziale Stadt zu ermöglichen. So zeigt sich, dass es der Ressourcen anderer Milieus bedarf, um die Armutsfalle benachteiligter Quartiere aufzulösen.}},
  author       = {{Cardinali, Marcel}},
  journal      = {{urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung}},
  keywords     = {{benachteiligte Quartiere, Sozialraum, Soziale Stadt, Wohnanforderungen}},
  number       = {{2}},
  pages        = {{50--55}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss}}},
  year         = {{2017}},
}

@article{5743,
  author       = {{Cardinali, Marcel and Hall, Oliver}},
  issn         = {{2566-8900}},
  journal      = {{urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung}},
  number       = {{3}},
  pages        = {{3}},
  title        = {{{Städte und Regionen verändern sich (Editorial)}}},
  year         = {{2017}},
}

@inproceedings{575,
  abstract     = {{Additive manufacturing technologies can provide cost and time advantages in mold making, compared to traditional approaches. Nevertheless, their applicability is not yet completely proven, especially in terms of surface finishing. The aim of this research work is to create perfect mold inserts by Selective Laser Melting (SLM) and to optimize surface quality. Therefore a process is developed to reduce the effort of surface quality optimization including a high flexibility in design. The tested process shows that simple and affordable methods can lead to usable molds with only minor restrictions in terms of appearance. Due to the initial reduction of layer thicknesses and distinct settings of laser melting parameters, the surface smoothness is significantly enhanced during the SLM building process. Subsequently blasting, manual grinding, as well as polishing operations, enable a selective smoothening of the surface up to a polished finish. As a result, the built tool parts can be used instantly for injection molding.}},
  author       = {{Elstermeyer, O. and Villmer, Franz-Josef}},
  booktitle    = {{Production Engineering and Management}},
  editor       = {{Padoano, Elio and Villmer, Franz-Josef}},
  isbn         = {{978-3-946856-01-6}},
  keywords     = {{Tool making, Direct rapid tooling, Additively manufactured molds, Selective laser melting, Additive manufacturing process chain, Post-processing}},
  location     = {{Pordenone, Italy}},
  number       = {{1}},
  pages        = {{101--113}},
  title        = {{{SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization}}},
  year         = {{2017}},
}

@article{5750,
  author       = {{Cardinali, Marcel and Hall, Oliver}},
  issn         = {{2566-8900}},
  journal      = {{urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung}},
  number       = {{2}},
  pages        = {{3}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Die Stadt der Zukunft (Editorial)}}},
  year         = {{2017}},
}

@inproceedings{576,
  abstract     = {{Due to a high level of competition in automotive industry, it is essentially important for automotive companies to develop innovative strategies and technologies in production and logistics. Postponement of production difference, i.e., customer individualized demand has been considered as an innovative strategy and more or less implemented in the production process, mostly before and during the final assembly. This paper proposed the concept of postponing the individualization of some components after the assembly. The idea is to use the idle times especially during the distribution process when vehicles are accumulated to generate big transportation batches or the follow-up transport does not start immediately. The individualization is carried out in specially realized workshops. Objectives of the approach are to reduce variations in the manufacturing, to shorten delivery times and to give consumers the ability to reorder individual components shortly before delivery. This kind of postponement of individualization induces the requirement of redesigning the logistics network, which means the selection of workshop locations and the new selection of the suppliers for the individualized components. To reach this aim, a software tool has been developed. In the tool, the data required in the logistics network such as suppliers and workshop potential locations are managed in a MySQL database and the optimization of the network is achieved by the especiallydeveloped non-dominated sorting genetic algorithm-II (NSGA-II). The design and development of the solution individuals and the fitness functions, which are the most important elements of a genetic algorithm, are based on the mathematical model of the logistics network design with product late individualization. Different scenarios are considered and generated to examine the applicability of the methodology in automotive practice. The optimization model and the heuristics of genetic algorithm are validated through the Pareto solutions for different scenarios.}},
  author       = {{Li, Li}},
  booktitle    = {{Production Engineering and Management}},
  editor       = {{Padoano, Elio and Villmer, Franz-Josef}},
  isbn         = {{978-3-946856-01-6}},
  keywords     = {{Automotive industry, Logistics network configuration, Late product individualization, Postponement, NSGGA}},
  location     = {{Pordenone, Italy}},
  number       = {{1}},
  pages        = {{139--150}},
  title        = {{{Optimization of Automotive Logistics Network with Late Product Individualization}}},
  year         = {{2017}},
}

@misc{12975,
  abstract     = {{Properly handled fish is usually marketed as “fresh fish” until day 10 after fishing. About 40% of the total fishery that is used for direct human consumption is marketed in fresh form stored at temperatures up to +2 °C. Currently, there are no validated methods available for controlling the recommended period of storage. Apart from being a potential source for food fraud, spoiled fish represents a major source of foodborne illnesses and intoxications.
In this study, a rapid MALDI-TOF mass spectrometry based screening method was developed using the vitreous fluid of fish eyes as specimen for the examination of different days of storage. The vitreous fluid was collected from n = 100 freshly fished brown trouts at day 0, 3, 7, 9, and 11 post mortem (n = 20 brown trouts each day of examination). The samples were immediately measured by MALDI-TOF mass spectrometry in linear positive mode (mass range m/z 2000–20,000 Da). For quality assurance the experiment was repeated with a set of brown trouts (n = 100) originating from the same fish farm and with brown trouts (n = 100) originating from a different fish farm. For specificity testing rainbow trouts (n = 10) were examined accordingly. All obtained mass spectra were processed by means of MALDI Biotyper OC 3.1 and ClinProTools 3.0 software.
The MALDI Biotyper approach showed limited applicability for the identification of the time of storage. However, it was suitable to reliably discriminate between the closely related species brown and rainbow trout. Processing by ClinProTools revealed four crucial mass peaks (m/z 2594 Da, m/z 4857 Da, m/z 4879 Da, m/z 4899 Da) which enabled a reliable differentiation between day 0 and 3, 7, 9, 11 (rate of correct identification > 90%) as well as the differentiation between day 3 and 7, 9, 11 (rate of correct identification > 72%). However, this approach showed limited applicability within the end of the tested period of storage when comparing between day 7, 9, or 11.}},
  author       = {{Ulrich, Sebastian and Beindorf, Philipp–Michael and Biermaier, Barbara and Schwaiger, Karin and Gareis, Manfred and Gottschalk, Christoph}},
  booktitle    = {{Food Control}},
  issn         = {{0956-7135}},
  keywords     = {{MALDI-TOF, Mass spectrometry, Freshness, Fish, Quality control, Authenticity}},
  number       = {{10}},
  pages        = {{281--289}},
  publisher    = {{Elsevier }},
  title        = {{{A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry}}},
  doi          = {{10.1016/j.foodcont.2017.05.005}},
  volume       = {{80}},
  year         = {{2017}},
}

@misc{12976,
  abstract     = {{The consumption of edible insects (entomophagy) will gain greater significance facing the increasing global population, which is suggested to reach 9 billion people in 2050 (FAO., 2009). Due to their high amount of proteins, fatty acids, vitamins, and minerals insects represent a valuable source of essential nutrients.
While the consumption of insects is very common in many countries of Africa and Asia, there is a far smaller acceptance for entomophagy in Western cultures. Though, products such as noodles or burger paddies made from insect meal have a better compliance and can already be purchased in some countries of the European Union. This processing step however involves the risk of adulteration, because there is no more possibility to authenticate the insects once they are ground.
The aim of this study was to investigate whether edible insects could be measured and distinguished by MALDI-TOF MS (matrix-assisted laser desorption ionization-time of flight mass spectrometry). Therefore, different kinds of edible insects (buffalo worms, mealworms, crickets and grasshoppers) were purchased via online shops and ground subsequently. The insect powder was extracted by vigorously shaking in diluted formic acid and measured by MALDI-TOF MS. The measurement provided reproducible as well as specific mass spectra and enabled a precise differentiation of the different species.}},
  author       = {{Ulrich, Sebastian and Kühn, Ulrike and Biermaier, Barbara and Piacenza, Nicolo and Schwaiger, Karin and Gottschalk, Christoph and Gareis, Manfred}},
  booktitle    = {{Food Control}},
  issn         = {{0956-7135}},
  keywords     = {{MALDI-TOF MS, Mass spectrometry, Edible insects, Authenticity, Food quality}},
  number       = {{6}},
  pages        = {{96--101}},
  publisher    = {{Elsevier}},
  title        = {{{Direct identification of edible insects by MALDI-TOF mass spectrometry}}},
  doi          = {{10.1016/j.foodcont.2017.01.010}},
  volume       = {{76}},
  year         = {{2017}},
}

@phdthesis{13452,
  abstract     = {{Im Rahmen dieser Arbeit wird die konstruktive Auslegung von Steckverbindern hinsichtlich der Stromtragfähigkeit untersucht.
Zunächst werden bekannte analytische Modelle aus verschiedenen physikalischen Phänomenen (mechanische, elektrische, thermische und kontaktphysikalische) miteinander kombiniert, um die Stromerwärmung von Steckverbinderkontakten incl. der angeschlossenen Leitung analytisch zu berechnen. Die Modelle werden mit Hilfe von Experimenten und FE-Analysen verifiziert.
Anschließend werden die analytischen Modelle umgeformt, um wichtige Fragestellungen bei der konstruktiven Auslegung von Steckverbinderkontakten zu berechnen. Dazu zählen unter anderem der maximal zulässige Durchgangswiderstand von Steckverbinderkontakten, der Zusammenhang zwischen Durchgangswiderstand und Stromerwärmung, sowie die optimale Anzahl an Kontaktfedern für einen Steckverbinderkontakt. Zudem werden Sensitivitätsanalysen
durchgeführt, um den Einfluss konstruktionsrelevanter Parameter auf die Stromerwärmung von Steckverbinderkontakten darzustellen.
Durch die gewonnenen Ergebnisse wird schließlich ein Vorgehen zur systematischen Auslegung von Steckverbinderkontakten hinsichtlich der Stromtragfähigkeit erarbeitet. Dieses nutzt analytische Modelle (parametrisierte Modelle), mit denen sich wesentliche geometrische Abmessungen und Werkstoffkennwerte berechnen lassen. Dadurch können Baureihen von Steckverbinderkontakten entwickelt werden, die einer einheitlichen Methodik folgen, eine Überdimensionierung vermeiden und sich für verschiedene Stromstärken skalieren lassen.
Die Arbeit stellt damit einen Ansatz zur parametrischen Konstruktion von Steckverbindern dar.}},
  author       = {{Blauth, Michael}},
  isbn         = {{978-3-86360-155-3}},
  pages        = {{221}},
  publisher    = {{Universitätsverlag Ilmenau}},
  title        = {{{Parametrisierte Modelle zur konstruktiven Auslegung optimierter elektrischer Steckverbinderkontakte}}},
  volume       = {{18 (28.03.2017)}},
  year         = {{2017}},
}

@inbook{9938,
  author       = {{Kunkel, Sabine and Utesch, Bernd and Winker, Martina and Felmeden, Jörg}},
  booktitle    = {{Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume}},
  editor       = {{Winker, Martina and Trapp, Jan and Libbe, Jens and Schramm, Engelbert}},
  isbn         = {{978-3-88118-584-4 }},
  pages        = {{99–115}},
  publisher    = {{Deutsches Institut für Urbanistik }},
  title        = {{{Wärmerückgewinnung und Betriebswassernutzung - Umsetzung einer Systemalternative in Frankfurt am Main}}},
  volume       = {{16}},
  year         = {{2017}},
}