[{"date_updated":"2024-03-21T09:59:33Z","doi":"10.1117/12.2251014","publisher":"SPIE","editor":[{"full_name":"Schröder, Henning","last_name":"Schröder","first_name":"Henning"},{"full_name":"Chen, Ray T.","last_name":"Chen","first_name":"Ray T."}],"type":"conference","conference":{"location":"San Francisco","end_date":"2017-02-01","start_date":"2017-01-30","name":"XVII. Optical Interconnects "},"abstract":[{"text":"This paper presents a bidirectional optical data transmission system as an enhancement of a contactless power transmission system (CPTS). The latter consists of two separate devices and is able to transmit up to 240W of electrical power using inductive resonant coupling. The optical system consists of two self-developed light-guiding structures and a short-reach free-space optical path. As source and sink of the optical system a light-emitting diode resp. a photodiode with a centroid wavelength of 850nm are used. The optical system is positioned within the CPTS; it transmits the PROFIBUS protocol. Due to the restrictions given by the applications areas of the CPTS, such as air gap up to 5°mm, misalignment up to 2 mm, tilting up to 5 and rotation angle up to 360°, different kinds of light-guiding structures are analyzed by simulation. Based on these results the most promising structures are selected and manufactured. Hereafter the attenuation and the near field characteristic of one light-guiding structure is analyzed. After this, the attenuation based on misalignment, variation of air gap, tilting and rotation between two light-guiding structures are analyzed by measurement. To check whether the requirements of the PROFIBUS has been satisfied by the complete data transmission system, the transient transmission behavior of the system was analyzed by a pseudo-random bit stream. In this paper the most important results of the design, the simulation and the measurement are explained. The presented results demonstrate the ability to design of such systems based on simulations and to evaluate the suitability of various geometries for present and future works.","lang":"eng"}],"status":"public","department":[{"_id":"DEP5020"}],"user_id":"51864","year":"2017","title":"Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications","language":[{"iso":"eng"}],"date_created":"2023-08-17T11:24:46Z","publication_status":"published","volume":10109,"place":"Bellingham, Wash.","citation":{"bjps":"Neu M et al. (2017) Modeling, Simulation and Measurement of a Bidirectional Optical Interconnection System for Industrial Applications. In Schröder H and Chen RT (eds), Optical Interconnects XVII, vol. 10109. Bellingham, Wash.: SPIE.","din1505-2-1":"Neu, Marc ; Grünberg, Olaf ; Christophliemke, Tobias ; Stübbe, Oliver: Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications. In: Schröder, H. ; Chen, R. T. (Hrsg.): Optical Interconnects XVII, Proceedings of SPIE . Bd. 10109. Bellingham, Wash. : SPIE, 2017","chicago":"Neu, Marc, Olaf Grünberg, Tobias Christophliemke, and Oliver Stübbe. “Modeling, Simulation and Measurement of a Bidirectional Optical Interconnection System for Industrial Applications.” In Optical Interconnects XVII, edited by Henning Schröder and Ray T. Chen, Vol. 10109. Proceedings of SPIE . Bellingham, Wash.: SPIE, 2017. https://doi.org/10.1117/12.2251014.","ieee":"M. Neu, O. Grünberg, T. Christophliemke, and O. Stübbe, “Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications,” in Optical Interconnects XVII, San Francisco, 2017, vol. 10109. doi: 10.1117/12.2251014.","van":"Neu M, Grünberg O, Christophliemke T, Stübbe O. Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications. In: Schröder H, Chen RT, editors. Optical Interconnects XVII. Bellingham, Wash.: SPIE; 2017. (Proceedings of SPIE ; vol. 10109).","ama":"Neu M, Grünberg O, Christophliemke T, Stübbe O. Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications. In: Schröder H, Chen RT, eds. Optical Interconnects XVII. Vol 10109. Proceedings of SPIE . SPIE; 2017. doi:10.1117/12.2251014","short":"M. Neu, O. Grünberg, T. Christophliemke, O. Stübbe, in: H. Schröder, R.T. Chen (Eds.), Optical Interconnects XVII, SPIE, Bellingham, Wash., 2017.","mla":"Neu, Marc, et al. “Modeling, Simulation and Measurement of a Bidirectional Optical Interconnection System for Industrial Applications.” Optical Interconnects XVII, edited by Henning Schröder and Ray T. Chen, vol. 10109, SPIE, 2017, https://doi.org/10.1117/12.2251014.","apa":"Neu, M., Grünberg, O., Christophliemke, T., & Stübbe, O. (2017). Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications. In H. Schröder & R. T. Chen (Eds.), Optical Interconnects XVII (Vol. 10109). SPIE. https://doi.org/10.1117/12.2251014","ufg":"Neu, Marc u. a.: Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications, in: Schröder, Henning/Chen, Ray T. (Hgg.): Optical Interconnects XVII, Bd. 10109, Bellingham, Wash. 2017 (Proceedings of SPIE ).","chicago-de":"Neu, Marc, Olaf Grünberg, Tobias Christophliemke und Oliver Stübbe. 2017. Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications. In: Optical Interconnects XVII, hg. von Henning Schröder und Ray T. Chen, 10109:. Proceedings of SPIE . Bellingham, Wash.: SPIE. doi:10.1117/12.2251014, .","havard":"M. Neu, O. Grünberg, T. Christophliemke, O. Stübbe, Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications, in: H. Schröder, R.T. Chen (Eds.), Optical Interconnects XVII, SPIE, Bellingham, Wash., 2017."},"publication_identifier":{"issn":["0277-786X"]},"author":[{"first_name":"Marc","last_name":"Neu","full_name":"Neu, Marc"},{"first_name":"Olaf","last_name":"Grünberg","full_name":"Grünberg, Olaf"},{"full_name":"Christophliemke, Tobias","id":"44221","last_name":"Christophliemke","first_name":"Tobias"},{"full_name":"Stübbe, Oliver","last_name":"Stübbe","id":"51864","first_name":"Oliver","orcid":"https://orcid.org/0000-0001-7293-6893"}],"intvolume":" 10109","_id":"10226","publication":"Optical Interconnects XVII","series_title":"Proceedings of SPIE "},{"date_created":"2023-08-17T11:37:20Z","language":[{"iso":"eng"}],"publication_status":"published","place":"Magdeburg","citation":{"havard":"D. Schneider, H. Flatt, J. Jasperneite, O. Stübbe, Entwurf eines Kanalmodells für Visible Light Communication in dynamischen, industriellen Umgebungen, Institut für Automation und Kommunikation e.V. Magdeburg, An-Institut der Otto-von-Guericke-Universität Magdeburg , Magdeburg, 2017.","mla":"Schneider, Daniel, et al. “Entwurf Eines Kanalmodells Für Visible Light Communication in Dynamischen, Industriellen Umgebungen.” Komma 2017 : Kommunikation in Der Automation : 14.-15.11.2017 : 8. Jahreskolloquium “Kommunikation in Der Automation,” edited by Ulrich Jumar et al., Institut für Automation und Kommunikation e.V. Magdeburg, An-Institut der Otto-von-Guericke-Universität Magdeburg , 2017.","apa":"Schneider, D., Flatt, H., Jasperneite, J., & Stübbe, O. (2017). Entwurf eines Kanalmodells für Visible Light Communication in dynamischen, industriellen Umgebungen. In U. Jumar, J. Jasperneite, Institut für Automation und Kommunikation e.V. Magdeburg, & Hochschule Ostwestfalen-Lippe, Institut für Industrielle Informationstechnik (Eds.), Komma 2017 : Kommunikation in der Automation : 14.-15.11.2017 : 8. Jahreskolloquium “Kommunikation in der Automation.” Institut für Automation und Kommunikation e.V. Magdeburg, An-Institut der Otto-von-Guericke-Universität Magdeburg .","short":"D. Schneider, H. Flatt, J. Jasperneite, O. Stübbe, Entwurf Eines Kanalmodells Für Visible Light Communication in Dynamischen, Industriellen Umgebungen, Institut für Automation und Kommunikation e.V. Magdeburg, An-Institut der Otto-von-Guericke-Universität Magdeburg , Magdeburg, 2017.","chicago-de":"Schneider, Daniel, Holger Flatt, Jürgen Jasperneite und Oliver Stübbe. 2017. Entwurf eines Kanalmodells für Visible Light Communication in dynamischen, industriellen Umgebungen. Hg. von Ulrich Jumar, Jürgen Jasperneite, Institut für Automation und Kommunikation e.V. Magdeburg, und Hochschule Ostwestfalen-Lippe, Institut für Industrielle Informationstechnik. Komma 2017 : Kommunikation in der Automation : 14.-15.11.2017 : 8. Jahreskolloquium „Kommunikation in der Automation“. Magdeburg: Institut für Automation und Kommunikation e.V. Magdeburg, An-Institut der Otto-von-Guericke-Universität Magdeburg .","ufg":"Schneider, Daniel u. a.: Entwurf eines Kanalmodells für Visible Light Communication in dynamischen, industriellen Umgebungen, hg. von Jumar, Ulrich u. a., Magdeburg 2017.","ieee":"D. Schneider, H. Flatt, J. Jasperneite, and O. Stübbe, Entwurf eines Kanalmodells für Visible Light Communication in dynamischen, industriellen Umgebungen. Magdeburg: Institut für Automation und Kommunikation e.V. Magdeburg, An-Institut der Otto-von-Guericke-Universität Magdeburg , 2017.","ama":"Schneider D, Flatt H, Jasperneite J, Stübbe O. Entwurf Eines Kanalmodells Für Visible Light Communication in Dynamischen, Industriellen Umgebungen. (Jumar U, Jasperneite J, Institut für Automation und Kommunikation e.V. Magdeburg, Hochschule Ostwestfalen-Lippe, Institut für Industrielle Informationstechnik, eds.). Institut für Automation und Kommunikation e.V. Magdeburg, An-Institut der Otto-von-Guericke-Universität Magdeburg ; 2017.","van":"Schneider D, Flatt H, Jasperneite J, Stübbe O. Entwurf eines Kanalmodells für Visible Light Communication in dynamischen, industriellen Umgebungen. Jumar U, Jasperneite J, Institut für Automation und Kommunikation e.V. Magdeburg, Hochschule Ostwestfalen-Lippe, Institut für Industrielle Informationstechnik, editors. Komma 2017 : Kommunikation in der Automation : 14.-15.11.2017 : 8. Jahreskolloquium “Kommunikation in der Automation.” Magdeburg: Institut für Automation und Kommunikation e.V. Magdeburg, An-Institut der Otto-von-Guericke-Universität Magdeburg ; 2017.","din1505-2-1":"Schneider, Daniel ; Flatt, Holger ; Jasperneite, Jürgen ; Stübbe, Oliver ; Jumar, U. ; Jasperneite, J. ; Institut für Automation und Kommunikation e.V. Magdeburg ; Hochschule Ostwestfalen-Lippe, Institut für Industrielle Informationstechnik (Hrsg.): Entwurf eines Kanalmodells für Visible Light Communication in dynamischen, industriellen Umgebungen. Magdeburg : Institut für Automation und Kommunikation e.V. Magdeburg, An-Institut der Otto-von-Guericke-Universität Magdeburg , 2017","bjps":"Schneider D et al. (2017) Entwurf Eines Kanalmodells Für Visible Light Communication in Dynamischen, Industriellen Umgebungen, Jumar U et al. (eds). Magdeburg: Institut für Automation und Kommunikation e.V. Magdeburg, An-Institut der Otto-von-Guericke-Universität Magdeburg .","chicago":"Schneider, Daniel, Holger Flatt, Jürgen Jasperneite, and Oliver Stübbe. Entwurf Eines Kanalmodells Für Visible Light Communication in Dynamischen, Industriellen Umgebungen. Edited by Ulrich Jumar, Jürgen Jasperneite, Institut für Automation und Kommunikation e.V. Magdeburg, and Hochschule Ostwestfalen-Lippe, Institut für Industrielle Informationstechnik. Komma 2017 : Kommunikation in Der Automation : 14.-15.11.2017 : 8. Jahreskolloquium “Kommunikation in Der Automation.” Magdeburg: Institut für Automation und Kommunikation e.V. Magdeburg, An-Institut der Otto-von-Guericke-Universität Magdeburg , 2017."},"publication_identifier":{"isbn":["978-3-944722-63-4"]},"author":[{"last_name":"Schneider","full_name":"Schneider, Daniel","first_name":"Daniel"},{"full_name":"Flatt, Holger","last_name":"Flatt","first_name":"Holger"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"},{"first_name":"Oliver","id":"51864","last_name":"Stübbe","full_name":"Stübbe, Oliver","orcid":"https://orcid.org/0000-0001-7293-6893"}],"title":"Entwurf eines Kanalmodells für Visible Light Communication in dynamischen, industriellen Umgebungen","main_file_link":[{"url":"https://www.researchgate.net/publication/319932874_Entwurf_eines_Kanalmodells_fur_Visible_Light_Communication_in_dynamischen_industriellen_Umgebungen"}],"publication":"Komma 2017 : Kommunikation in der Automation : 14.-15.11.2017 : 8. Jahreskolloquium \"Kommunikation in der Automation\"","_id":"10228","publisher":" Institut für Automation und Kommunikation e.V. Magdeburg, An-Institut der Otto-von-Guericke-Universität Magdeburg ","editor":[{"last_name":"Jumar","full_name":"Jumar, Ulrich","first_name":"Ulrich"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"type":"conference_editor_article","date_updated":"2024-03-21T09:58:55Z","status":"public","department":[{"_id":"DEP5020"}],"corporate_editor":[" Institut für Automation und Kommunikation e.V. Magdeburg"," Hochschule Ostwestfalen-Lippe, Institut für Industrielle Informationstechnik"],"year":"2017","user_id":"51864","conference":{"location":"Magdeburg","end_date":"2017-11-15","start_date":"2017-11-14","name":"8. Jahreskolloquium \"Kommunikation in der Automation\""},"abstract":[{"lang":"eng","text":"In diesem Beitrag werden die Störeinflüsse für optische Freiraumkommunikation in industriellen Produktionsumgebungen empirisch analysiert und ein Modellierungsansatz abgeleitet. Um drahtlose Kommunikationstechnologien einzusetzen, sind erhebliche Resistenzen gegenüber Störeinflüssen erforderlich, die Visible Light Communication (VLC) bis heute nicht vollständig erfüllt. Anhand von empirischen Messreihen wird in diesem Beitrag nachgewiesen, dass bei der Systemauslegung von VLC, anders als bisher, unterschiedliche Störquellen zu berücksichtigen sind, die orts- und zeitvariante Eigenschaften haben. Auf empirischen Untersuchungen basierend, wird eine alternative Berechnung der gesamten Störquellenleistung vorgeschlagen, die unmittelbar Auswirkung auf das Signal-Rausch-Verhältnis (SNR) und die maximal verfügbare Kanalkapazität hat. Der vorgestellte Ansatz dient dazu VLC-Systeme auch für industrielle Produktionsumgebungen auslegen zu können."}]},{"year":"2017","user_id":"45672","department":[{"_id":"DEP8008"}],"status":"public","_id":"10634","oa":"1","conference":{"location":"Prague, Czech Republic","end_date":"2017-07-07","start_date":"2017-07-04","name":"28th International ACM Conference on Hypertext and Social Media"},"type":"conference_editor","citation":{"van":"Rubart J, Yesilada Y, editors. Hypertext 2017 Extended Proceedings. CEUR-WS.org; 2017.","ama":"Rubart J, Yesilada Y, eds. Hypertext 2017 Extended Proceedings. CEUR-WS.org; 2017.","ieee":"J. Rubart and Y. Yesilada, Eds., Hypertext 2017 Extended Proceedings. CEUR-WS.org, 2017.","havard":"J. Rubart, Y. Yesilada, eds., Hypertext 2017 Extended Proceedings, CEUR-WS.org, 2017.","ufg":"Rubart, Jessica/Yesilada, Yeliz: Hypertext 2017 Extended Proceedings, o. O. 2017.","chicago-de":"Rubart, Jessica und Yeliz Yesilada, Hrsg. 2017. Hypertext 2017 Extended Proceedings. CEUR-WS.org.","chicago":"Rubart, Jessica, and Yeliz Yesilada, eds. Hypertext 2017 Extended Proceedings. CEUR-WS.org, 2017.","bjps":"Rubart J and Yesilada Y (eds) (2017) Hypertext 2017 Extended Proceedings. CEUR-WS.org.","short":"J. Rubart, Y. Yesilada, eds., Hypertext 2017 Extended Proceedings, CEUR-WS.org, 2017.","din1505-2-1":"Rubart, J. ; Yesilada, Y. (Hrsg.): Hypertext 2017 Extended Proceedings : CEUR-WS.org, 2017","mla":"Rubart, Jessica, and Yeliz Yesilada, editors. Hypertext 2017 Extended Proceedings. CEUR-WS.org, 2017.","apa":"Rubart, J., & Yesilada, Y. (Eds.). (2017). Hypertext 2017 Extended Proceedings. CEUR-WS.org."},"editor":[{"full_name":"Rubart, Jessica","id":"45672","last_name":"Rubart","first_name":"Jessica"},{"full_name":"Yesilada, Yeliz","last_name":"Yesilada","first_name":"Yeliz"}],"publication_status":"published","publisher":"CEUR-WS.org","date_created":"2023-10-27T11:01:38Z","language":[{"iso":"eng"}],"date_updated":"2023-10-27T11:06:05Z","main_file_link":[{"open_access":"1","url":"https://ceur-ws.org/Vol-1914/"}],"quality_controlled":"1","title":"Hypertext 2017 Extended Proceedings"},{"date_updated":"2023-10-31T08:52:32Z","doi":"10.1007/s41449-017-0081-8","issue":"1","publisher":"Springer","type":"journal_article","page":"90-98","keyword":["General Medicine"],"extern":"1","status":"public","department":[{"_id":"DEP1522"}],"year":"2017","user_id":"83781","title":"Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie","publication_status":"published","volume":72,"language":[{"iso":"ger"}],"date_created":"2023-10-30T12:53:36Z","citation":{"havard":"B. Latos, C. Holtkötter, J. Brinkjans, P. Kalantar, P.M. Przybysz, S. Mütze-Niewöhner, Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie, Zeitschrift für Arbeitswissenschaft. 72 (2017) 90–98.","ufg":"Latos, Benedikt u. a.: Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie, in: Zeitschrift für Arbeitswissenschaft 72 (2017), H. 1,  S. 90–98.","chicago-de":"Latos, Benedikt, Christoph Holtkötter, Jan Brinkjans, Peyman Kalantar, Philipp M. Przybysz und Susanne Mütze-Niewöhner. 2017. Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie. Zeitschrift für Arbeitswissenschaft 72, Nr. 1: 90–98. doi:10.1007/s41449-017-0081-8, .","short":"B. Latos, C. Holtkötter, J. Brinkjans, P. Kalantar, P.M. Przybysz, S. Mütze-Niewöhner, Zeitschrift für Arbeitswissenschaft 72 (2017) 90–98.","apa":"Latos, B., Holtkötter, C., Brinkjans, J., Kalantar, P., Przybysz, P. M., & Mütze-Niewöhner, S. (2017). Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie. Zeitschrift für Arbeitswissenschaft, 72(1), 90–98. https://doi.org/10.1007/s41449-017-0081-8","mla":"Latos, Benedikt, et al. “Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie.” Zeitschrift für Arbeitswissenschaft, vol. 72, no. 1, 2017, pp. 90–98, https://doi.org/10.1007/s41449-017-0081-8.","van":"Latos B, Holtkötter C, Brinkjans J, Kalantar P, Przybysz PM, Mütze-Niewöhner S. Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie. Zeitschrift für Arbeitswissenschaft. 2017;72(1):90–8.","ama":"Latos B, Holtkötter C, Brinkjans J, Kalantar P, Przybysz PM, Mütze-Niewöhner S. Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie. Zeitschrift für Arbeitswissenschaft. 2017;72(1):90-98. doi:10.1007/s41449-017-0081-8","ieee":"B. Latos, C. Holtkötter, J. Brinkjans, P. Kalantar, P. M. Przybysz, and S. Mütze-Niewöhner, “Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie,” Zeitschrift für Arbeitswissenschaft, vol. 72, no. 1, pp. 90–98, 2017, doi: 10.1007/s41449-017-0081-8.","chicago":"Latos, Benedikt, Christoph Holtkötter, Jan Brinkjans, Peyman Kalantar, Philipp M. Przybysz, and Susanne Mütze-Niewöhner. “Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie.” Zeitschrift für Arbeitswissenschaft 72, no. 1 (2017): 90–98. https://doi.org/10.1007/s41449-017-0081-8.","bjps":"Latos B et al. (2017) Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie. Zeitschrift für Arbeitswissenschaft 72, 90–98.","din1505-2-1":"Latos, Benedikt ; Holtkötter, Christoph ; Brinkjans, Jan ; Kalantar, Peyman ; Przybysz, Philipp M. ; Mütze-Niewöhner, Susanne: Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie. In: Zeitschrift für Arbeitswissenschaft Bd. 72, Springer (2017), Nr. 1, S. 90–98"},"publication_identifier":{"eissn":["2366-4681"],"issn":["0340-2444"]},"intvolume":" 72","author":[{"full_name":"Latos, Benedikt","last_name":"Latos","id":"84474","first_name":"Benedikt"},{"last_name":"Holtkötter","full_name":"Holtkötter, Christoph","first_name":"Christoph"},{"last_name":"Brinkjans","full_name":"Brinkjans, Jan","first_name":"Jan"},{"first_name":"Peyman","last_name":"Kalantar","full_name":"Kalantar, Peyman"},{"first_name":"Philipp M.","last_name":"Przybysz","full_name":"Przybysz, Philipp M."},{"last_name":"Mütze-Niewöhner","full_name":"Mütze-Niewöhner, Susanne","first_name":"Susanne"}],"_id":"10662","publication":"Zeitschrift für Arbeitswissenschaft"},{"issue":"1","doi":"10.1007/s41449-017-0081-8","date_updated":"2025-03-12T13:06:06Z","type":"journal_article","publisher":"Springer Science and Business Media LLC","keyword":["General Medicine"],"extern":"1","page":"90-98","department":[{"_id":"DEP1522"}],"year":"2017","user_id":"84474","status":"public","title":"Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie","publication_identifier":{"issn":["0340-2444","2366-4681"]},"author":[{"last_name":"Latos","id":"84474","full_name":"Latos, Benedikt","first_name":"Benedikt"},{"full_name":"Holtkötter, Christoph","last_name":"Holtkötter","first_name":"Christoph"},{"full_name":"Brinkjans, Jan","last_name":"Brinkjans","first_name":"Jan"},{"first_name":"Peyman","last_name":"Kalantar","full_name":"Kalantar, Peyman"},{"first_name":"Philipp M.","last_name":"Przybysz","full_name":"Przybysz, Philipp M."},{"full_name":"Mütze-Niewöhner, Susanne","last_name":"Mütze-Niewöhner","first_name":"Susanne"}],"intvolume":" 72","publication_status":"published","volume":72,"language":[{"iso":"ger"}],"date_created":"2023-10-30T12:53:48Z","citation":{"short":"B. Latos, C. Holtkötter, J. Brinkjans, P. Kalantar, P.M. Przybysz, S. Mütze-Niewöhner, Zeitschrift für Arbeitswissenschaft 72 (2017) 90–98.","bjps":"Latos B et al. (2017) Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie. Zeitschrift für Arbeitswissenschaft 72, 90–98.","apa":"Latos, B., Holtkötter, C., Brinkjans, J., Kalantar, P., Przybysz, P. M., & Mütze-Niewöhner, S. (2017). Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie. Zeitschrift für Arbeitswissenschaft, 72(1), 90–98. https://doi.org/10.1007/s41449-017-0081-8","mla":"Latos, Benedikt, et al. “Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie.” Zeitschrift für Arbeitswissenschaft, vol. 72, no. 1, 2017, pp. 90–98, https://doi.org/10.1007/s41449-017-0081-8.","din1505-2-1":"Latos, Benedikt ; Holtkötter, Christoph ; Brinkjans, Jan ; Kalantar, Peyman ; Przybysz, Philipp M. ; Mütze-Niewöhner, Susanne: Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie. In: Zeitschrift für Arbeitswissenschaft Bd. 72, Springer Science and Business Media LLC (2017), Nr. 1, S. 90–98","ufg":"Latos, Benedikt u. a.: Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie, in: Zeitschrift für Arbeitswissenschaft 72 (2017), H. 1,  S. 90–98.","chicago-de":"Latos, Benedikt, Christoph Holtkötter, Jan Brinkjans, Peyman Kalantar, Philipp M. Przybysz und Susanne Mütze-Niewöhner. 2017. Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie. Zeitschrift für Arbeitswissenschaft 72, Nr. 1: 90–98. doi:10.1007/s41449-017-0081-8, .","chicago":"Latos, Benedikt, Christoph Holtkötter, Jan Brinkjans, Peyman Kalantar, Philipp M. Przybysz, and Susanne Mütze-Niewöhner. “Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie.” Zeitschrift für Arbeitswissenschaft 72, no. 1 (2017): 90–98. https://doi.org/10.1007/s41449-017-0081-8.","havard":"B. Latos, C. Holtkötter, J. Brinkjans, P. Kalantar, P.M. Przybysz, S. Mütze-Niewöhner, Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie, Zeitschrift für Arbeitswissenschaft. 72 (2017) 90–98.","ieee":"B. Latos, C. Holtkötter, J. Brinkjans, P. Kalantar, P. M. Przybysz, and S. Mütze-Niewöhner, “Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie,” Zeitschrift für Arbeitswissenschaft, vol. 72, no. 1, pp. 90–98, 2017, doi: 10.1007/s41449-017-0081-8.","ama":"Latos B, Holtkötter C, Brinkjans J, Kalantar P, Przybysz PM, Mütze-Niewöhner S. Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie. Zeitschrift für Arbeitswissenschaft. 2017;72(1):90-98. doi:10.1007/s41449-017-0081-8","van":"Latos B, Holtkötter C, Brinkjans J, Kalantar P, Przybysz PM, Mütze-Niewöhner S. Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie. Zeitschrift für Arbeitswissenschaft. 2017;72(1):90–8."},"_id":"10663","publication":"Zeitschrift für Arbeitswissenschaft"},{"date_updated":"2023-10-31T11:17:30Z","type":"conference","editor":[{"last_name":" Gonçalves","full_name":" Gonçalves, Paulo J.S.","first_name":"Paulo J.S."}],"publisher":"EUROSIS-ETI","extern":"1","conference":{"start_date":"2017-10-25","end_date":"2017-10-27","name":"The 2017 European Simulation and Modelling Conference","location":"Lisbon, Portugal"},"page":"162-166","user_id":"83781","year":"2017","corporate_editor":["European Simulation and Modelling Conference ","European Technology Institute ","European Simulation Society"],"department":[{"_id":"DEP1522"}],"status":"public","title":"Simulation of a Flexible and Adaptable One-Piece-Flow Assembly Line Based on a Process Flow of Colored and Timed Petri Nets","author":[{"first_name":"Benedikt","id":"84474","last_name":"Latos","full_name":"Latos, Benedikt"},{"first_name":"Peyman","last_name":"Kalantar","full_name":"Kalantar, Peyman"},{"first_name":"Philipp","last_name":"Przybysz","full_name":"Przybysz, Philipp"},{"last_name":"Mütze-Niewöhner","full_name":"Mütze-Niewöhner, Susanne","first_name":"Susanne"},{"first_name":"Christoph","full_name":"Holtkötter, Christoph","last_name":"Holtkötter"},{"first_name":"Jan","last_name":"Brinkjans","full_name":"Brinkjans, Jan"}],"publication_identifier":{"isbn":["978-492859-00-6 (Formal falsche ISBN)"]},"citation":{"ieee":"B. Latos, P. Kalantar, P. Przybysz, S. Mütze-Niewöhner, C. Holtkötter, and J. Brinkjans, “Simulation of a Flexible and Adaptable One-Piece-Flow Assembly Line Based on a Process Flow of Colored and Timed Petri Nets,” in   Modelling and simulation 2017 : the European Simulation and Modelling Conference 2017 : ESM’2017 : October 25-27, 2017, Lisbon, Portual , Lisbon, Portugal, 2017, pp. 162–166.","havard":"B. Latos, P. Kalantar, P. Przybysz, S. Mütze-Niewöhner, C. Holtkötter, J. Brinkjans, Simulation of a Flexible and Adaptable One-Piece-Flow Assembly Line Based on a Process Flow of Colored and Timed Petri Nets, in: P.J.S. Gonçalves, European Simulation and Modelling Conference <Lissabon>, European Technology Institute , European Simulation Society (Eds.),   Modelling and Simulation 2017 : The European Simulation and Modelling Conference 2017 : ESM’2017 : October 25-27, 2017, Lisbon, Portual , EUROSIS-ETI, Ostend, Belgium , 2017: pp. 162–166.","van":"Latos B, Kalantar P, Przybysz P, Mütze-Niewöhner S, Holtkötter C, Brinkjans J. Simulation of a Flexible and Adaptable One-Piece-Flow Assembly Line Based on a Process Flow of Colored and Timed Petri Nets. In: Gonçalves PJS, European Simulation and Modelling Conference <Lissabon>, European Technology Institute , European Simulation Society, editors.   Modelling and simulation 2017 : the European Simulation and Modelling Conference 2017 : ESM’2017 : October 25-27, 2017, Lisbon, Portual . Ostend, Belgium : EUROSIS-ETI; 2017. p. 162–6.","ama":"Latos B, Kalantar P, Przybysz P, Mütze-Niewöhner S, Holtkötter C, Brinkjans J. Simulation of a Flexible and Adaptable One-Piece-Flow Assembly Line Based on a Process Flow of Colored and Timed Petri Nets. In: Gonçalves PJS, European Simulation and Modelling Conference <Lissabon>, European Technology Institute , European Simulation Society, eds.   Modelling and Simulation 2017 : The European Simulation and Modelling Conference 2017 : ESM’2017 : October 25-27, 2017, Lisbon, Portual . EUROSIS-ETI; 2017:162-166.","din1505-2-1":"Latos, Benedikt ; Kalantar, Peyman ; Przybysz, Philipp ; Mütze-Niewöhner, Susanne ; Holtkötter, Christoph ; Brinkjans, Jan: Simulation of a Flexible and Adaptable One-Piece-Flow Assembly Line Based on a Process Flow of Colored and Timed Petri Nets. In: Gonçalves, P. J. S. ; European Simulation and Modelling Conference <Lissabon> ; European Technology Institute ; European Simulation Society (Hrsg.):   Modelling and simulation 2017 : the European Simulation and Modelling Conference 2017 : ESM’2017 : October 25-27, 2017, Lisbon, Portual . Ostend, Belgium  : EUROSIS-ETI, 2017, S. 162–166","mla":"Latos, Benedikt, et al. “Simulation of a Flexible and Adaptable One-Piece-Flow Assembly Line Based on a Process Flow of Colored and Timed Petri Nets.”   Modelling and Simulation 2017 : The European Simulation and Modelling Conference 2017 : ESM’2017 : October 25-27, 2017, Lisbon, Portual , edited by Paulo J.S. Gonçalves et al., EUROSIS-ETI, 2017, pp. 162–66.","apa":"Latos, B., Kalantar, P., Przybysz, P., Mütze-Niewöhner, S., Holtkötter, C., & Brinkjans, J. (2017). Simulation of a Flexible and Adaptable One-Piece-Flow Assembly Line Based on a Process Flow of Colored and Timed Petri Nets. In P. J. S. Gonçalves, European Simulation and Modelling Conference <Lissabon>, European Technology Institute , & European Simulation Society (Eds.),   Modelling and simulation 2017 : the European Simulation and Modelling Conference 2017 : ESM’2017 : October 25-27, 2017, Lisbon, Portual (pp. 162–166). EUROSIS-ETI.","bjps":"Latos B et al. (2017) Simulation of a Flexible and Adaptable One-Piece-Flow Assembly Line Based on a Process Flow of Colored and Timed Petri Nets. In Gonçalves PJS et al. (eds),   Modelling and Simulation 2017 : The European Simulation and Modelling Conference 2017 : ESM’2017 : October 25-27, 2017, Lisbon, Portual . Ostend, Belgium : EUROSIS-ETI, pp. 162–166.","short":"B. Latos, P. Kalantar, P. Przybysz, S. Mütze-Niewöhner, C. Holtkötter, J. Brinkjans, in: P.J.S. Gonçalves, European Simulation and Modelling Conference <Lissabon>, European Technology Institute , European Simulation Society (Eds.),   Modelling and Simulation 2017 : The European Simulation and Modelling Conference 2017 : ESM’2017 : October 25-27, 2017, Lisbon, Portual , EUROSIS-ETI, Ostend, Belgium , 2017, pp. 162–166.","chicago":"Latos, Benedikt, Peyman Kalantar, Philipp Przybysz, Susanne Mütze-Niewöhner, Christoph Holtkötter, and Jan Brinkjans. “Simulation of a Flexible and Adaptable One-Piece-Flow Assembly Line Based on a Process Flow of Colored and Timed Petri Nets.” In   Modelling and Simulation 2017 : The European Simulation and Modelling Conference 2017 : ESM’2017 : October 25-27, 2017, Lisbon, Portual , edited by Paulo J.S. Gonçalves, European Simulation and Modelling Conference <Lissabon>, European Technology Institute , and European Simulation Society, 162–66. Ostend, Belgium : EUROSIS-ETI, 2017.","chicago-de":"Latos, Benedikt, Peyman Kalantar, Philipp Przybysz, Susanne Mütze-Niewöhner, Christoph Holtkötter und Jan Brinkjans. 2017. Simulation of a Flexible and Adaptable One-Piece-Flow Assembly Line Based on a Process Flow of Colored and Timed Petri Nets. In:   Modelling and simulation 2017 : the European Simulation and Modelling Conference 2017 : ESM’2017 : October 25-27, 2017, Lisbon, Portual , hg. von Paulo J.S. Gonçalves, European Simulation and Modelling Conference <Lissabon>, European Technology Institute , und European Simulation Society, 162–166. Ostend, Belgium : EUROSIS-ETI.","ufg":"Latos, Benedikt u. a.: Simulation of a Flexible and Adaptable One-Piece-Flow Assembly Line Based on a Process Flow of Colored and Timed Petri Nets, in: Gonçalves, Paulo J.S. u. a. (Hgg.):   Modelling and simulation 2017 : the European Simulation and Modelling Conference 2017 : ESM’2017 : October 25-27, 2017, Lisbon, Portual , Ostend, Belgium 2017,  S. 162–166."},"place":"Ostend, Belgium ","publication_status":"published","language":[{"iso":"eng"}],"date_created":"2023-10-30T13:04:41Z","_id":"10669","publication":"\t Modelling and simulation 2017 : the European Simulation and Modelling Conference 2017 : ESM'2017 : October 25-27, 2017, Lisbon, Portual "},{"year":"2017","user_id":"83781","department":[{"_id":"DEP1522"}],"corporate_editor":["Gesellschaft für Arbeitswissenschaft e.V., GfA"],"status":"public","publication":"Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017","extern":"1","_id":"10670","conference":{"name":"63. Arbeitswissenschaftlicher Kongress","end_date":"2017-02-17","start_date":"2017-02-15","location":"FHNW Brugg-Windisch, Schweiz"},"author":[{"first_name":"Benedikt","id":"84474","last_name":"Latos","full_name":"Latos, Benedikt"},{"full_name":"Holtkötter, Christoph","last_name":"Holtkötter","first_name":"Christoph"},{"last_name":"Brinkjans","full_name":"Brinkjans, Jan","first_name":"Jan"},{"first_name":"Philipp","last_name":"Przybysz","full_name":"Przybysz, Philipp"},{"last_name":"Mütze-Niewöhner","full_name":"Mütze-Niewöhner, Susanne","first_name":"Susanne"},{"full_name":"Schlick, Christopher","last_name":"Schlick","first_name":"Christopher"}],"type":"conference","publication_identifier":{"isbn":["9783936804225"]},"place":"Dortmund","citation":{"chicago":"Latos, Benedikt, Christoph Holtkötter, Jan Brinkjans, Philipp Przybysz, Susanne Mütze-Niewöhner, and Christopher Schlick. “Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie bei einem Hersteller von weißer Ware.” In Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017, edited by Gesellschaft für Arbeitswissenschaft e.V., GfA. Dortmund: GfA-Press, 2017.","bjps":"Latos B et al. (2017) Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie bei einem Hersteller von weißer Ware. In Gesellschaft für Arbeitswissenschaft e.V., GfA (ed.), Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017. Dortmund: GfA-Press.","din1505-2-1":"Latos, Benedikt ; Holtkötter, Christoph ; Brinkjans, Jan ; Przybysz, Philipp ; Mütze-Niewöhner, Susanne ; Schlick, Christopher: Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie bei einem Hersteller von weißer Ware. In: Gesellschaft für Arbeitswissenschaft e.V., GfA (Hrsg.): Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017. Dortmund : GfA-Press, 2017","van":"Latos B, Holtkötter C, Brinkjans J, Przybysz P, Mütze-Niewöhner S, Schlick C. Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie bei einem Hersteller von weißer Ware. In: Gesellschaft für Arbeitswissenschaft e.V., GfA, editor. Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63 Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15-17 Februar 2017. Dortmund: GfA-Press; 2017.","ama":"Latos B, Holtkötter C, Brinkjans J, Przybysz P, Mütze-Niewöhner S, Schlick C. Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie bei einem Hersteller von weißer Ware. In: Gesellschaft für Arbeitswissenschaft e.V., GfA, ed. Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017. GfA-Press; 2017.","ieee":"B. Latos, C. Holtkötter, J. Brinkjans, P. Przybysz, S. Mütze-Niewöhner, and C. Schlick, “Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie bei einem Hersteller von weißer Ware,” in Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017, FHNW Brugg-Windisch, Schweiz, 2017.","ufg":"Latos, Benedikt u. a.: Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie bei einem Hersteller von weißer Ware, in: Gesellschaft für Arbeitswissenschaft e.V., GfA (Hg.): Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017, Dortmund 2017.","chicago-de":"Latos, Benedikt, Christoph Holtkötter, Jan Brinkjans, Philipp Przybysz, Susanne Mütze-Niewöhner und Christopher Schlick. 2017. Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie bei einem Hersteller von weißer Ware. In: Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017, hg. von Gesellschaft für Arbeitswissenschaft e.V., GfA. Dortmund: GfA-Press.","short":"B. Latos, C. Holtkötter, J. Brinkjans, P. Przybysz, S. Mütze-Niewöhner, C. Schlick, in: Gesellschaft für Arbeitswissenschaft e.V., GfA (Ed.), Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017, GfA-Press, Dortmund, 2017.","mla":"Latos, Benedikt, et al. “Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie bei einem Hersteller von weißer Ware.” Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017, edited by Gesellschaft für Arbeitswissenschaft e.V., GfA, GfA-Press, 2017.","apa":"Latos, B., Holtkötter, C., Brinkjans, J., Przybysz, P., Mütze-Niewöhner, S., & Schlick, C. (2017). Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie bei einem Hersteller von weißer Ware. In Gesellschaft für Arbeitswissenschaft e.V., GfA (Ed.), Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017. GfA-Press.","havard":"B. Latos, C. Holtkötter, J. Brinkjans, P. Przybysz, S. Mütze-Niewöhner, C. Schlick, Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie bei einem Hersteller von weißer Ware, in: Gesellschaft für Arbeitswissenschaft e.V., GfA (Ed.), Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017, GfA-Press, Dortmund, 2017."},"date_created":"2023-10-30T13:05:55Z","language":[{"iso":"ger"}],"publisher":"GfA-Press","publication_status":"published","date_updated":"2023-10-31T10:38:46Z","title":"Partizipatives und simulationsgestütztes Vorgehen zur Konzeption einer flexiblen und demografierobusten Montagelinie bei einem Hersteller von weißer Ware"},{"conference":{"location":"FHNW Brugg-Windisch, Schweiz","name":"63. Arbeitswissenschaftlicher Kongress","start_date":"2017-02-15","end_date":"2017-02-17"},"extern":"1","_id":"10671","status":"public","publication":"Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017 ","user_id":"83781","year":"2017","department":[{"_id":"DEP1522"}],"corporate_editor":["Gesellschaft für Arbeitswissenschaft e.V., GfA"],"date_updated":"2023-10-31T10:33:19Z","title":"Komplexität in Arbeitssystemen: Analyse und Ordnung von Beschreibungsansätzen aus unterschiedlichen Disziplinen","place":"Dortmund","citation":{"havard":"B. Latos, M. Harlacher, M. El-Mahgary, D. Götzelmann, P. Przybysz, S. Mütze-Niewöhner, C. Schlick, Komplexität in Arbeitssystemen: Analyse und Ordnung von Beschreibungsansätzen aus unterschiedlichen Disziplinen, in: Gesellschaft für Arbeitswissenschaft e.V., GfA (Ed.), Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017 , GfA-Press, Dortmund, 2017.","chicago-de":"Latos, Benedikt, Markus Harlacher, Mochtar El-Mahgary, Daniela Götzelmann, Philipp Przybysz, Susanne Mütze-Niewöhner und Christopher Schlick. 2017. Komplexität in Arbeitssystemen: Analyse und Ordnung von Beschreibungsansätzen aus unterschiedlichen Disziplinen. In: Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017 , hg. von Gesellschaft für Arbeitswissenschaft e.V., GfA. Dortmund: GfA-Press.","ufg":"Latos, Benedikt u. a.: Komplexität in Arbeitssystemen: Analyse und Ordnung von Beschreibungsansätzen aus unterschiedlichen Disziplinen, in: Gesellschaft für Arbeitswissenschaft e.V., GfA (Hg.): Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017 , Dortmund 2017.","mla":"Latos, Benedikt, et al. “Komplexität in Arbeitssystemen: Analyse und Ordnung von Beschreibungsansätzen aus unterschiedlichen Disziplinen.” Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017 , edited by Gesellschaft für Arbeitswissenschaft e.V., GfA, GfA-Press, 2017.","apa":"Latos, B., Harlacher, M., El-Mahgary, M., Götzelmann, D., Przybysz, P., Mütze-Niewöhner, S., & Schlick, C. (2017). Komplexität in Arbeitssystemen: Analyse und Ordnung von Beschreibungsansätzen aus unterschiedlichen Disziplinen. In Gesellschaft für Arbeitswissenschaft e.V., GfA (Ed.), Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017 . GfA-Press.","short":"B. Latos, M. Harlacher, M. El-Mahgary, D. Götzelmann, P. Przybysz, S. Mütze-Niewöhner, C. Schlick, in: Gesellschaft für Arbeitswissenschaft e.V., GfA (Ed.), Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017 , GfA-Press, Dortmund, 2017.","ama":"Latos B, Harlacher M, El-Mahgary M, et al. Komplexität in Arbeitssystemen: Analyse und Ordnung von Beschreibungsansätzen aus unterschiedlichen Disziplinen. In: Gesellschaft für Arbeitswissenschaft e.V., GfA, ed. Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017 . GfA-Press; 2017.","van":"Latos B, Harlacher M, El-Mahgary M, Götzelmann D, Przybysz P, Mütze-Niewöhner S, et al. Komplexität in Arbeitssystemen: Analyse und Ordnung von Beschreibungsansätzen aus unterschiedlichen Disziplinen. In: Gesellschaft für Arbeitswissenschaft e.V., GfA, editor. Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63 Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15-17 Februar 2017 . Dortmund: GfA-Press; 2017.","ieee":"B. Latos et al., “Komplexität in Arbeitssystemen: Analyse und Ordnung von Beschreibungsansätzen aus unterschiedlichen Disziplinen,” in Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017 , FHNW Brugg-Windisch, Schweiz, 2017.","chicago":"Latos, Benedikt, Markus Harlacher, Mochtar El-Mahgary, Daniela Götzelmann, Philipp Przybysz, Susanne Mütze-Niewöhner, and Christopher Schlick. “Komplexität in Arbeitssystemen: Analyse und Ordnung von Beschreibungsansätzen aus unterschiedlichen Disziplinen.” In Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017 , edited by Gesellschaft für Arbeitswissenschaft e.V., GfA. Dortmund: GfA-Press, 2017.","din1505-2-1":"Latos, Benedikt ; Harlacher, Markus ; El-Mahgary, Mochtar ; Götzelmann, Daniela ; Przybysz, Philipp ; Mütze-Niewöhner, Susanne ; Schlick, Christopher: Komplexität in Arbeitssystemen: Analyse und Ordnung von Beschreibungsansätzen aus unterschiedlichen Disziplinen. In: Gesellschaft für Arbeitswissenschaft e.V., GfA (Hrsg.): Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017 . Dortmund : GfA-Press, 2017","bjps":"Latos B et al. (2017) Komplexität in Arbeitssystemen: Analyse und Ordnung von Beschreibungsansätzen aus unterschiedlichen Disziplinen. In Gesellschaft für Arbeitswissenschaft e.V., GfA (ed.), Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft : 63. Kongress der Gesellschaft für Arbeitswissenschaft : FHNW Brugg-Windisch, Schweiz, 15.-17. Februar 2017 . Dortmund: GfA-Press."},"date_created":"2023-10-30T13:07:55Z","language":[{"iso":"ger"}],"publisher":"GfA-Press","publication_status":"published","type":"conference","author":[{"full_name":"Latos, Benedikt","last_name":"Latos","id":"84474","first_name":"Benedikt"},{"first_name":"Markus","last_name":"Harlacher","full_name":"Harlacher, Markus"},{"first_name":"Mochtar","last_name":"El-Mahgary","full_name":"El-Mahgary, Mochtar"},{"first_name":"Daniela","last_name":"Götzelmann","full_name":"Götzelmann, Daniela"},{"first_name":"Philipp","last_name":"Przybysz","full_name":"Przybysz, Philipp"},{"first_name":"Susanne","full_name":"Mütze-Niewöhner, Susanne","last_name":"Mütze-Niewöhner"},{"last_name":"Schlick","full_name":"Schlick, Christopher","first_name":"Christopher"}],"publication_identifier":{"isbn":["9783936804225"]}},{"department":[{"_id":"DEP1000"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"corporate_editor":["Hochschule Ostwestfalen-Lippe"],"user_id":"83781","year":"2017","status":"public","file":[{"date_created":"2019-05-02T09:45:27Z","file_size":35964456,"file_id":"1104","creator":"hka-zn8","access_level":"open_access","date_updated":"2019-05-02T09:45:27Z","relation":"main_file","success":1,"content_type":"application/pdf","file_name":"1st_RMB-Conference_2017_komprimiert.pdf"}],"conference":{"start_date":"2017-11-23","end_date":"2017-11-24","name":"RMB Conference 2017, facade2017, ConstructionLab // Annual Report 2015-17","location":"Detmold"},"page":"349","abstract":[{"lang":"eng","text":"Since 2000 (in the beginning 21st Century) climate change and globalisation have influenced the actual\r\nworld and all societies tremendously and the have also affected the way we are building. Safety and\r\nsecurity requirements are increasing and are consequently influencing the design of the building envelope.\r\n‘Resilience’ describes the function and ability of buildings and their facades to to recover from or adjust\r\neasily to change. “Resilience” addresses the impacts of climate change and globalization and of safety and security requirements on the building envelope. The first edition of the Detmold Conference Week 2017 connects education and research, scholars and professionals in different events and formats: a master workshop and two conferences will discuss the approaches of resilient design and construction for buildings and facades.\r\nThe direct way to specific stresses forced by water, wind, fire, explosion or earthquake but also in an indirect way seen as a general ability of adaptivity to different changes will be discussed at the facade2017 conference on Friday 24th November 2017 from different academic and professional perspectives.\r\nThe 1st RMB Conference on Thursday 23rd November 2017 is organized by the consortium of the ERASMUS+ \r\nproject “RMB: Reuse of Modernist Buildings. Design Tools for Sustainable Transformations”. There representatives of the consortium as well as international guest will debate in particular issues of Resilience of Modern Movement Buildings and Neighborhoods. During the conference we will discuss new design and educational concepts for the reuse of modern postwar buildings for housing and other purposes – resilience through reuse. Scholars, PhD and master students present and discuss selected papers and posters."}],"type":"conference_editor","editor":[{"first_name":"Michael","last_name":"Melenhorst","id":"51438","full_name":"Melenhorst, Michael"},{"orcid":"0000-0002-8594-3168","first_name":"Uta","full_name":"Pottgiesser, Uta","id":"27166","last_name":"Pottgiesser"},{"first_name":"Christine","last_name":"Naumann","id":"11346","full_name":"Naumann, Christine"},{"last_name":"Kellner","id":"52011","full_name":"Kellner, Theresa","first_name":"Theresa"}],"file_date_updated":"2019-05-02T09:45:27Z","doi":"10.25644/5sg5-zf09","date_updated":"2024-03-22T19:10:07Z","_id":"1102","oa":"1","ddc":["720"],"publication_identifier":{"isbn":["978-3-939349-27-3"]},"date_created":"2019-04-25T12:25:45Z","language":[{"iso":"eng"}],"publication_status":"published","place":"Lemgo","citation":{"bjps":"Melenhorst M et al. (eds) (2017) Detmold Conference Week 2017. Lemgo.","din1505-2-1":"Melenhorst, M. ; Pottgiesser, U. ; Naumann, C. ; Kellner, T. ; Hochschule Ostwestfalen-Lippe (Hrsg.): Detmold Conference Week 2017. Lemgo, 2017","chicago":"Melenhorst, Michael, Uta Pottgiesser, Christine Naumann, Theresa Kellner, and Hochschule Ostwestfalen-Lippe, eds. Detmold Conference Week 2017. Lemgo, 2017. https://doi.org/10.25644/5sg5-zf09.","ieee":"M. Melenhorst, U. Pottgiesser, C. Naumann, T. Kellner, and Hochschule Ostwestfalen-Lippe, Eds., Detmold Conference Week 2017. Lemgo, 2017, p. 349. doi: 10.25644/5sg5-zf09.","van":"Melenhorst M, Pottgiesser U, Naumann C, Kellner T, Hochschule Ostwestfalen-Lippe, editors. Detmold Conference Week 2017. Lemgo; 2017.","ama":"Melenhorst M, Pottgiesser U, Naumann C, Kellner T, Hochschule Ostwestfalen-Lippe, eds. Detmold Conference Week 2017.; 2017:349. doi:10.25644/5sg5-zf09","short":"M. Melenhorst, U. Pottgiesser, C. Naumann, T. Kellner, Hochschule Ostwestfalen-Lippe, eds., Detmold Conference Week 2017, Lemgo, 2017.","apa":"Melenhorst, M., Pottgiesser, U., Naumann, C., Kellner, T., & Hochschule Ostwestfalen-Lippe (Eds.). (2017). Detmold Conference Week 2017 (p. 349). https://doi.org/10.25644/5sg5-zf09","mla":"Melenhorst, Michael, et al., editors. Detmold Conference Week 2017. 2017, p. 349, https://doi.org/10.25644/5sg5-zf09.","ufg":"Melenhorst, Michael u. a.: Detmold Conference Week 2017, Lemgo 2017.","chicago-de":"Melenhorst, Michael, Uta Pottgiesser, Christine Naumann, Theresa Kellner, und Hochschule Ostwestfalen-Lippe, Hrsg. 2017. Detmold Conference Week 2017. Lemgo. doi:10.25644/5sg5-zf09, .","havard":"M. Melenhorst, U. Pottgiesser, C. Naumann, T. Kellner, Hochschule Ostwestfalen-Lippe, eds., Detmold Conference Week 2017, Lemgo, 2017."},"title":"Detmold Conference Week 2017","has_accepted_license":"1"},{"title":"Development of a Business Game for Teaching the Kanban Method","doi":"10.1007/978-3-662-53305-5","date_updated":"2023-03-15T13:49:41Z","editor":[{"first_name":"Christopher Marc ","full_name":"Schlick, Christopher Marc ","last_name":"Schlick"},{"last_name":"Duckwitz ","full_name":"Duckwitz , Sönke","first_name":" Sönke"},{"first_name":" Frank","full_name":"Flemisch , Frank","last_name":"Flemisch "},{"full_name":"Frenz, Martin","last_name":"Frenz","first_name":"Martin"},{"first_name":"Sinem","full_name":"Kuz, Sinem","last_name":"Kuz"},{"full_name":"Mertens, Alexander","last_name":"Mertens","first_name":"Alexander"},{"last_name":"Mütze-Niewöhner","full_name":"Mütze-Niewöhner, Susanne","first_name":"Susanne"}],"publication_status":"published","publisher":"Spinger","language":[{"iso":"eng"}],"date_created":"2018-11-26T10:15:09Z","citation":{"apa":"Brown, D., Hinrichsen, S., & Paris, M. (2017). Development of a Business Game for Teaching the Kanban Method. In C. M. Schlick, Sönke Duckwitz , Frank Flemisch , M. Frenz, S. Kuz, A. Mertens, & S. Mütze-Niewöhner (Eds.), Advances in Ergonomic Design of Systems, Products and Processes (pp. 103–114). Berlin, Heidelberg: Spinger. https://doi.org/10.1007/978-3-662-53305-5","mla":"Brown, David, et al. “Development of a Business Game for Teaching the Kanban Method.” Advances in Ergonomic Design of Systems, Products and Processes, edited by Christopher Marc Schlick et al., Spinger, 2017, pp. 103–14, doi:10.1007/978-3-662-53305-5.","short":"D. Brown, S. Hinrichsen, M. Paris, in: C.M. Schlick, Sönke Duckwitz , Frank Flemisch , M. Frenz, S. Kuz, A. Mertens, S. Mütze-Niewöhner (Eds.), Advances in Ergonomic Design of Systems, Products and Processes, Spinger, Berlin, Heidelberg, 2017, pp. 103–114.","chicago-de":"Brown, David, Sven Hinrichsen und Melissa Paris. 2017. Development of a Business Game for Teaching the Kanban Method. In: Advances in Ergonomic Design of Systems, Products and Processes, hg. von Christopher Marc Schlick, Sönke Duckwitz , Frank Flemisch , Martin Frenz, Sinem Kuz, Alexander Mertens, und Susanne Mütze-Niewöhner, 103–114. Berlin, Heidelberg: Spinger. doi:10.1007/978-3-662-53305-5, .","ufg":"Brown, David et. al. (2017): Development of a Business Game for Teaching the Kanban Method, in: Christopher Marc Schlick et. al. (Hgg.): Advances in Ergonomic Design of Systems, Products and Processes, Berlin, Heidelberg, S. 103–114.","havard":"D. Brown, S. Hinrichsen, M. Paris, Development of a Business Game for Teaching the Kanban Method, in: C.M. Schlick, Sönke Duckwitz , Frank Flemisch , M. Frenz, S. Kuz, A. Mertens, S. Mütze-Niewöhner (Eds.), Advances in Ergonomic Design of Systems, Products and Processes, Spinger, Berlin, Heidelberg, 2017: pp. 103–114.","din1505-2-1":"Brown, David ; Hinrichsen, Sven ; Paris, Melissa: Development of a Business Game for Teaching the Kanban Method. In: Schlick, C. M. ; Duckwitz , Sönke ; Flemisch , Frank ; Frenz, M. ; Kuz, S. ; Mertens, A. ; Mütze-Niewöhner, S. (Hrsg.): Advances in Ergonomic Design of Systems, Products and Processes. Berlin, Heidelberg : Spinger, 2017, S. 103–114","bjps":"Brown D, Hinrichsen S and Paris M (2017) Development of a Business Game for Teaching the Kanban Method. In Schlick CM et al. (eds), Advances in Ergonomic Design of Systems, Products and Processes. Berlin, Heidelberg: Spinger, pp. 103–114.","chicago":"Brown, David, Sven Hinrichsen, and Melissa Paris. “Development of a Business Game for Teaching the Kanban Method.” In Advances in Ergonomic Design of Systems, Products and Processes, edited by Christopher Marc Schlick, Sönke Duckwitz , Frank Flemisch , Martin Frenz, Sinem Kuz, Alexander Mertens, and Susanne Mütze-Niewöhner, 103–14. Berlin, Heidelberg: Spinger, 2017. https://doi.org/10.1007/978-3-662-53305-5.","ieee":"D. Brown, S. Hinrichsen, and M. Paris, “Development of a Business Game for Teaching the Kanban Method,” in Advances in Ergonomic Design of Systems, Products and Processes, C. M. Schlick, Sönke Duckwitz , Frank Flemisch , M. Frenz, S. Kuz, A. Mertens, and S. Mütze-Niewöhner, Eds. Berlin, Heidelberg: Spinger, 2017, pp. 103–114.","van":"Brown D, Hinrichsen S, Paris M. Development of a Business Game for Teaching the Kanban Method. In: Schlick CM, Duckwitz Sönke, Flemisch Frank, Frenz M, Kuz S, Mertens A, et al., editors. Advances in Ergonomic Design of Systems, Products and Processes. Berlin, Heidelberg: Spinger; 2017. p. 103–14.","ama":"Brown D, Hinrichsen S, Paris M. Development of a Business Game for Teaching the Kanban Method. In: Schlick CM, Duckwitz Sönke, Flemisch Frank, et al., eds. Advances in Ergonomic Design of Systems, Products and Processes. Berlin, Heidelberg: Spinger; 2017:103-114. doi:10.1007/978-3-662-53305-5"},"place":"Berlin, Heidelberg","publication_identifier":{"isbn":["978-3-662-53304-8"]},"type":"book_chapter","author":[{"first_name":"David","full_name":"Brown, David","id":"58586","last_name":"Brown"},{"id":"49010","last_name":"Hinrichsen","full_name":"Hinrichsen, Sven","first_name":"Sven"},{"full_name":"Paris, Melissa","id":"64556","last_name":"Paris","first_name":"Melissa"}],"conference":{"location":"Aachen","name":"62. GfA Frühjahrskongress 2016","end_date":"2016-03-04","start_date":"2016-03-02"},"page":"103-114","abstract":[{"lang":"eng","text":"Learning retention is improved when in addition to the learning methods of “classical” instruction (auditory, visual), further learning channels (discussing, doing) are addressed. In view of this, the coursework for the degree in Industrial Engineering has been designed to include teaching formats with a high level of interaction among students. In keeping with this teaching approach, an additional business game was developed for the Production Systems module. This game provides knowledge about the structure of the logistical workflow within production in general and the Kanban method in particular. The first step in designing the game was to define learning objectives. Based on these, a basic concept was derived. This basic concept applies the guideline for the introduction of Kanban by Geiger et al. (2011). The detailed concept was then worked out over the course of further development, leading to the design of an assembly line for Lego cars as well as the design of tasks on the subject of Kanban capability and for calculating the number of Kanban. The business game illustrates, inter alia, the difference between the Kanban method and a conventional production planning and control system. The simulation has been tested in a university course, evaluated and, in response to the positive feedback from students, integrated in the course instruction. The conclusion of the paper provides an outlook on the further development of instruction in the context of the digitization and networking of production."}],"_id":"261","publication":"Advances in Ergonomic Design of Systems, Products and Processes","status":"public","department":[{"_id":"DEP7020"}],"user_id":"49010","year":2017},{"issue":"30","date_updated":"2023-03-15T13:49:41Z","title":"Entwicklung und Auswahl von Montageassistenzsystemen","author":[{"first_name":"Sven","full_name":"Hinrichsen, Sven","last_name":"Hinrichsen","id":"49010"},{"last_name":"Riediger","id":"52263","full_name":"Riediger, Daniel","first_name":"Daniel"},{"id":"64690","last_name":"Unrau","full_name":"Unrau, Alexander","first_name":"Alexander"}],"type":"conference","publication_identifier":{"isbn":["978-3-936804-22-5"]},"place":"Dortmund","citation":{"van":"Hinrichsen S, Riediger D, Unrau A. Entwicklung und Auswahl von Montageassistenzsystemen. In: Gesellschaft für Arbeitswissenschaft e.V (GfA), editor. Bericht zum 63 Frühjahrskongress der Gesellschaft für Arbeitswissenschaft eV . Dortmund: GfA-Press; 2017.","ama":"Hinrichsen S, Riediger D, Unrau A. Entwicklung und Auswahl von Montageassistenzsystemen. In: Gesellschaft für Arbeitswissenschaft e.V (GfA), ed. Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. . Dortmund: GfA-Press; 2017.","ieee":"S. Hinrichsen, D. Riediger, and A. Unrau, “Entwicklung und Auswahl von Montageassistenzsystemen,” in Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. , Brugg-Windisch, Switzerland, 2017, no. 30.","chicago":"Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Entwicklung und Auswahl von Montageassistenzsystemen.” In Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. , edited by Gesellschaft für Arbeitswissenschaft e.V (GfA). Dortmund: GfA-Press, 2017.","din1505-2-1":"Hinrichsen, Sven ; Riediger, Daniel ; Unrau, Alexander: Entwicklung und Auswahl von Montageassistenzsystemen. In: Gesellschaft für Arbeitswissenschaft e.V (GfA) (Hrsg.): Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. . Dortmund : GfA-Press, 2017","bjps":"Hinrichsen S, Riediger D and Unrau A (2017) Entwicklung und Auswahl von Montageassistenzsystemen. In Gesellschaft für Arbeitswissenschaft e.V (GfA) (ed.), Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. . Dortmund: GfA-Press.","havard":"S. Hinrichsen, D. Riediger, A. Unrau, Entwicklung und Auswahl von Montageassistenzsystemen, in: Gesellschaft für Arbeitswissenschaft e.V (GfA) (Ed.), Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. , GfA-Press, Dortmund, 2017.","chicago-de":"Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2017. Entwicklung und Auswahl von Montageassistenzsystemen. In: Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. , hg. von Gesellschaft für Arbeitswissenschaft e.V (GfA). Dortmund: GfA-Press.","ufg":"Hinrichsen, Sven et. al. (2017): Entwicklung und Auswahl von Montageassistenzsystemen, in: Gesellschaft für Arbeitswissenschaft e.V (GfA) (Hg.): Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. , Dortmund.","apa":"Hinrichsen, S., Riediger, D., & Unrau, A. (2017). Entwicklung und Auswahl von Montageassistenzsystemen. In Gesellschaft für Arbeitswissenschaft e.V (GfA) (Ed.), Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. . Dortmund: GfA-Press.","mla":"Hinrichsen, Sven, et al. “Entwicklung und Auswahl von Montageassistenzsystemen.” Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. , edited by Gesellschaft für Arbeitswissenschaft e.V (GfA), no. 30, GfA-Press, 2017.","short":"S. Hinrichsen, D. Riediger, A. Unrau, in: Gesellschaft für Arbeitswissenschaft e.V (GfA) (Ed.), Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. , GfA-Press, Dortmund, 2017."},"language":[{"iso":"ger"}],"date_created":"2018-11-26T10:39:05Z","publisher":"GfA-Press","publication_status":"published","_id":"262","abstract":[{"lang":"ger","text":"Die Anforderungen an die Gestaltung von Montagesystemen verändern sich. Dazu tragen sich verkürzende Innovations- und Produktlebenszyklen sowie eine zunehmende Variantenvielfalt bei, mit der eine Montage von kleinen Losen bis hin zur kundenindividuellen Montage einhergeht. Den aktuellen Anforderungen an Montagesysteme steht die Weiterentwicklung der technologischen Möglichkeiten zur Gestaltung von manuellen und hybriden Montagesystemen gegenüber. Die große Anzahl der am Markt verfügbaren Assistenzsysteme für die Montage erschwert den Prozess der Auswahl und Konfiguration eines anforderungsgerechten Assistenzsystems. Daher zielt der vorliegende Beitrag darauf ab, aufbauend auf begrifflichen Grundlagen eine Klassifikation der Montageassistenzsysteme vorzunehmen und damit den Auswahlprozess zu unterstützen."}],"conference":{"end_date":"2017-02-17","start_date":"2017-02-15","name":"Soziotechnische Gestaltung des digitalen Wandels - Kreativ, Innovativ, Sinnhaft","location":"Brugg-Windisch, Switzerland"},"year":2017,"user_id":"49010","department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"corporate_editor":["Gesellschaft für Arbeitswissenschaft e.V (GfA)"],"status":"public","publication":"Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. "},{"issue":"1","title":"Fehlaromen in der Ebermast. Ebergeruchsanalytik im Vergleich","date_updated":"2024-05-17T12:47:14Z","type":"journal_article","author":[{"last_name":"Nolte","full_name":"Nolte, T.","first_name":"T."},{"full_name":"Hölscher, Maike","last_name":"Hölscher","id":"12647","first_name":"Maike"},{"full_name":"Upmann, Matthias","id":"12666","last_name":"Upmann","first_name":"Matthias"},{"first_name":"Jürgen","full_name":"Zapp, Jürgen","last_name":"Zapp","id":"12568"}],"intvolume":" 113","publication_status":"published","volume":113,"date_created":"2020-05-27T07:53:50Z","language":[{"iso":"ger"}],"citation":{"havard":"T. Nolte, M. Hölscher, M. Upmann, J. Zapp, Fehlaromen in der Ebermast. Ebergeruchsanalytik im Vergleich, Deutsche Lebensmittel-Rundschau. 113 (2017) 17–21.","apa":"Nolte, T., Hölscher, M., Upmann, M., & Zapp, J. (2017). Fehlaromen in der Ebermast. Ebergeruchsanalytik im Vergleich. Deutsche Lebensmittel-Rundschau, 113(1), 17–21.","mla":"Nolte, T., et al. “Fehlaromen in der Ebermast. Ebergeruchsanalytik im Vergleich.” Deutsche Lebensmittel-Rundschau, vol. 113, no. 1, 2017, pp. 17–21.","short":"T. Nolte, M. Hölscher, M. Upmann, J. Zapp, Deutsche Lebensmittel-Rundschau 113 (2017) 17–21.","chicago-de":"Nolte, T., Maike Hölscher, Matthias Upmann und Jürgen Zapp. 2017. Fehlaromen in der Ebermast. Ebergeruchsanalytik im Vergleich. Deutsche Lebensmittel-Rundschau 113, Nr. 1: 17–21.","ufg":"Nolte, T. u. a.: Fehlaromen in der Ebermast. Ebergeruchsanalytik im Vergleich, in: Deutsche Lebensmittel-Rundschau 113 (2017), H. 1,  S. 17–21.","ieee":"T. Nolte, M. Hölscher, M. Upmann, and J. Zapp, “Fehlaromen in der Ebermast. Ebergeruchsanalytik im Vergleich,” Deutsche Lebensmittel-Rundschau, vol. 113, no. 1, pp. 17–21, 2017.","ama":"Nolte T, Hölscher M, Upmann M, Zapp J. Fehlaromen in der Ebermast. Ebergeruchsanalytik im Vergleich. Deutsche Lebensmittel-Rundschau. 2017;113(1):17-21.","van":"Nolte T, Hölscher M, Upmann M, Zapp J. Fehlaromen in der Ebermast. Ebergeruchsanalytik im Vergleich. Deutsche Lebensmittel-Rundschau. 2017;113(1):17–21.","din1505-2-1":"Nolte, T. ; Hölscher, Maike ; Upmann, Matthias ; Zapp, Jürgen: Fehlaromen in der Ebermast. Ebergeruchsanalytik im Vergleich. In: Deutsche Lebensmittel-Rundschau Bd. 113 (2017), Nr. 1, S. 17–21","bjps":"Nolte T et al. (2017) Fehlaromen in der Ebermast. Ebergeruchsanalytik im Vergleich. Deutsche Lebensmittel-Rundschau 113, 17–21.","chicago":"Nolte, T., Maike Hölscher, Matthias Upmann, and Jürgen Zapp. “Fehlaromen in der Ebermast. Ebergeruchsanalytik im Vergleich.” Deutsche Lebensmittel-Rundschau 113, no. 1 (2017): 17–21."},"_id":"2620","page":"17-21","department":[{"_id":"DEP4019"}],"year":"2017","user_id":"83778","publication":"Deutsche Lebensmittel-Rundschau","status":"public"},{"type":"conference","author":[{"first_name":"Matthias","id":"12666","last_name":"Upmann","full_name":"Upmann, Matthias"}],"citation":{"chicago":"Upmann, Matthias. “Schnitzel & Co - Auslaufmodelle der Ernährung?,” 2017.","bjps":"Upmann M (2017) Schnitzel & Co - Auslaufmodelle der Ernährung?","din1505-2-1":"Upmann, Matthias: Schnitzel & Co - Auslaufmodelle der Ernährung? In: , 2017","van":"Upmann M. Schnitzel & Co - Auslaufmodelle der Ernährung? In 2017.","ama":"Upmann M. Schnitzel & Co - Auslaufmodelle der Ernährung? In: ; 2017.","ieee":"M. Upmann, “Schnitzel & Co - Auslaufmodelle der Ernährung?,” presented at the Winterseminar Verein Tiere im Dorf e.V., Schwelentrup, 2017.","ufg":"Upmann, Matthias: Schnitzel & Co - Auslaufmodelle der Ernährung?, in: o. Hg.: o. O. 2017.","chicago-de":"Upmann, Matthias. 2017. Schnitzel & Co - Auslaufmodelle der Ernährung? In: .","short":"M. Upmann, in: 2017.","apa":"Upmann, M. (2017). Schnitzel & Co - Auslaufmodelle der Ernährung? Winterseminar Verein Tiere im Dorf e.V., Schwelentrup.","mla":"Upmann, Matthias. Schnitzel & Co - Auslaufmodelle der Ernährung? 2017.","havard":"M. Upmann, Schnitzel & Co - Auslaufmodelle der Ernährung?, in: 2017."},"language":[{"iso":"ger"}],"date_created":"2020-05-27T07:55:33Z","publication_status":"published","date_updated":"2024-05-17T12:47:34Z","title":"Schnitzel & Co - Auslaufmodelle der Ernährung?","year":"2017","user_id":"83778","department":[{"_id":"DEP4019"}],"status":"public","_id":"2621","conference":{"location":"Schwelentrup","start_date":"2017-03-14","end_date":"2017-03-14","name":"Winterseminar Verein Tiere im Dorf e.V."}},{"status":"public","year":"2017","user_id":"83778","department":[{"_id":"DEP4019"}],"conference":{"name":"Verbraucherzentrale Nordrhein-Westfalen. Fachgespräch \"Das Töten männlicher Eintragsküken vermeiden - Möglichkeiten für Verbraucher, Produktion und Handel","start_date":"2017-03-21","end_date":"2017-03-21","location":"Düsseldorf"},"_id":"2622","citation":{"bjps":"Upmann M and Lautenschläger R (2017) Fleisch vom Bruderhahn - einsetzbar und zielführend für hochwertige Fleischerzeugnisse?","din1505-2-1":"Upmann, Matthias ; Lautenschläger, Ralf: Fleisch vom Bruderhahn - einsetzbar und zielführend für hochwertige Fleischerzeugnisse? In: , 2017","chicago":"Upmann, Matthias, and Ralf Lautenschläger. “Fleisch vom Bruderhahn - einsetzbar und zielführend für hochwertige Fleischerzeugnisse?,” 2017.","ieee":"M. Upmann and R. Lautenschläger, “Fleisch vom Bruderhahn - einsetzbar und zielführend für hochwertige Fleischerzeugnisse?,” presented at the Verbraucherzentrale Nordrhein-Westfalen. Fachgespräch \"Das Töten männlicher Eintragsküken vermeiden - Möglichkeiten für Verbraucher, Produktion und Handel, Düsseldorf, 2017.","ama":"Upmann M, Lautenschläger R. Fleisch vom Bruderhahn - einsetzbar und zielführend für hochwertige Fleischerzeugnisse? In: ; 2017.","van":"Upmann M, Lautenschläger R. Fleisch vom Bruderhahn - einsetzbar und zielführend für hochwertige Fleischerzeugnisse? In 2017.","short":"M. Upmann, R. Lautenschläger, in: 2017.","mla":"Upmann, Matthias, and Ralf Lautenschläger. Fleisch vom Bruderhahn - einsetzbar und zielführend für hochwertige Fleischerzeugnisse? 2017.","apa":"Upmann, M., & Lautenschläger, R. (2017). Fleisch vom Bruderhahn - einsetzbar und zielführend für hochwertige Fleischerzeugnisse? Verbraucherzentrale Nordrhein-Westfalen. Fachgespräch \"Das Töten männlicher Eintragsküken vermeiden - Möglichkeiten für Verbraucher, Produktion und Handel, Düsseldorf.","ufg":"Upmann, Matthias/Lautenschläger, Ralf: Fleisch vom Bruderhahn - einsetzbar und zielführend für hochwertige Fleischerzeugnisse?, in: o. Hg.: o. O. 2017.","chicago-de":"Upmann, Matthias und Ralf Lautenschläger. 2017. Fleisch vom Bruderhahn - einsetzbar und zielführend für hochwertige Fleischerzeugnisse? In: .","havard":"M. Upmann, R. Lautenschläger, Fleisch vom Bruderhahn - einsetzbar und zielführend für hochwertige Fleischerzeugnisse?, in: 2017."},"language":[{"iso":"ger"}],"date_created":"2020-05-27T07:57:21Z","publication_status":"published","author":[{"first_name":"Matthias","full_name":"Upmann, Matthias","id":"12666","last_name":"Upmann"},{"first_name":"Ralf","id":"62087","last_name":"Lautenschläger","full_name":"Lautenschläger, Ralf"}],"type":"conference","date_updated":"2024-05-17T12:47:56Z","title":"Fleisch vom Bruderhahn - einsetzbar und zielführend für hochwertige Fleischerzeugnisse?"},{"date_updated":"2024-05-17T12:48:19Z","title":"Detektion von Ebergeruchsstoffen - analytisch chemische Aspekte","type":"conference","author":[{"first_name":"T.","full_name":"Nolte, T.","last_name":"Nolte"},{"id":"12647","last_name":"Hölscher","full_name":"Hölscher, Maike","first_name":"Maike"},{"first_name":"Matthias","id":"12666","last_name":"Upmann","full_name":"Upmann, Matthias"},{"first_name":"Jürgen","last_name":"Zapp","id":"12568","full_name":"Zapp, Jürgen"}],"citation":{"bjps":"Nolte T et al. (2017) Detektion von Ebergeruchsstoffen - analytisch chemische Aspekte.","din1505-2-1":"Nolte, T. ; Hölscher, Maike ; Upmann, Matthias ; Zapp, Jürgen: Detektion von Ebergeruchsstoffen - analytisch chemische Aspekte. In: , 2017","chicago":"Nolte, T., Maike Hölscher, Matthias Upmann, and Jürgen Zapp. “Detektion von Ebergeruchsstoffen - analytisch chemische Aspekte,” 2017.","ieee":"T. Nolte, M. Hölscher, M. Upmann, and J. Zapp, “Detektion von Ebergeruchsstoffen - analytisch chemische Aspekte,” presented at the DLG-Forum kompakt: Fleischtechnologie – Technologie der Eberfleischverarbeitung, Bad Salzuflen, 2017.","van":"Nolte T, Hölscher M, Upmann M, Zapp J. Detektion von Ebergeruchsstoffen - analytisch chemische Aspekte. In 2017.","ama":"Nolte T, Hölscher M, Upmann M, Zapp J. Detektion von Ebergeruchsstoffen - analytisch chemische Aspekte. In: ; 2017.","short":"T. Nolte, M. Hölscher, M. Upmann, J. Zapp, in: 2017.","apa":"Nolte, T., Hölscher, M., Upmann, M., & Zapp, J. (2017). Detektion von Ebergeruchsstoffen - analytisch chemische Aspekte. DLG-Forum kompakt: Fleischtechnologie – Technologie der Eberfleischverarbeitung, Bad Salzuflen.","mla":"Nolte, T., et al. Detektion von Ebergeruchsstoffen - analytisch chemische Aspekte. 2017.","ufg":"Nolte, T. u. a.: Detektion von Ebergeruchsstoffen - analytisch chemische Aspekte, in: o. Hg.: o. O. 2017.","chicago-de":"Nolte, T., Maike Hölscher, Matthias Upmann und Jürgen Zapp. 2017. Detektion von Ebergeruchsstoffen - analytisch chemische Aspekte. In: .","havard":"T. Nolte, M. Hölscher, M. Upmann, J. Zapp, Detektion von Ebergeruchsstoffen - analytisch chemische Aspekte, in: 2017."},"date_created":"2020-05-27T08:01:33Z","language":[{"iso":"ger"}],"publication_status":"published","_id":"2623","conference":{"location":"Bad Salzuflen","name":"DLG-Forum kompakt: Fleischtechnologie – Technologie der Eberfleischverarbeitung","start_date":"2017-03-21","end_date":"2017-03-21"},"year":"2017","user_id":"83778","department":[{"_id":"DEP4019"}],"status":"public"},{"title":"Verarbeitung von Eberfleisch - Möglichkeiten und Grenzen","date_updated":"2024-05-17T12:48:40Z","language":[{"iso":"ger"}],"date_created":"2020-05-27T08:04:01Z","publication_status":"published","citation":{"van":"Hölscher M, Nolte T, Zapp J, Stiebing A, Lautenschläger R, Upmann M. Verarbeitung von Eberfleisch - Möglichkeiten und Grenzen. In 2017.","ama":"Hölscher M, Nolte T, Zapp J, Stiebing A, Lautenschläger R, Upmann M. Verarbeitung von Eberfleisch - Möglichkeiten und Grenzen. In: ; 2017.","ieee":"M. Hölscher, T. Nolte, J. Zapp, A. Stiebing, R. Lautenschläger, and M. Upmann, “Verarbeitung von Eberfleisch - Möglichkeiten und Grenzen,” presented at the DLG-Forum kompakt: Fleischtechnologie – Technologie der Eberfleischverarbeitung, Bad Salzuflen, 2017.","chicago":"Hölscher, Maike, T. Nolte, Jürgen Zapp, Achim Stiebing, Ralf Lautenschläger, and Matthias Upmann. “Verarbeitung von Eberfleisch - Möglichkeiten und Grenzen,” 2017.","din1505-2-1":"Hölscher, Maike ; Nolte, T. ; Zapp, Jürgen ; Stiebing, Achim ; Lautenschläger, Ralf ; Upmann, Matthias: Verarbeitung von Eberfleisch - Möglichkeiten und Grenzen. In: , 2017","bjps":"Hölscher M et al. (2017) Verarbeitung von Eberfleisch - Möglichkeiten und Grenzen.","havard":"M. Hölscher, T. Nolte, J. Zapp, A. Stiebing, R. Lautenschläger, M. Upmann, Verarbeitung von Eberfleisch - Möglichkeiten und Grenzen, in: 2017.","chicago-de":"Hölscher, Maike, T. Nolte, Jürgen Zapp, Achim Stiebing, Ralf Lautenschläger und Matthias Upmann. 2017. Verarbeitung von Eberfleisch - Möglichkeiten und Grenzen. In: .","ufg":"Hölscher, Maike u. a.: Verarbeitung von Eberfleisch - Möglichkeiten und Grenzen, in: o. Hg.: o. O. 2017.","mla":"Hölscher, Maike, et al. Verarbeitung von Eberfleisch - Möglichkeiten und Grenzen. 2017.","apa":"Hölscher, M., Nolte, T., Zapp, J., Stiebing, A., Lautenschläger, R., & Upmann, M. (2017). Verarbeitung von Eberfleisch - Möglichkeiten und Grenzen. DLG-Forum kompakt: Fleischtechnologie – Technologie der Eberfleischverarbeitung, Bad Salzuflen.","short":"M. Hölscher, T. Nolte, J. Zapp, A. Stiebing, R. Lautenschläger, M. Upmann, in: 2017."},"type":"conference","author":[{"full_name":"Hölscher, Maike","last_name":"Hölscher","id":"12647","first_name":"Maike"},{"full_name":"Nolte, T.","last_name":"Nolte","first_name":"T."},{"full_name":"Zapp, Jürgen","last_name":"Zapp","id":"12568","first_name":"Jürgen"},{"full_name":"Stiebing, Achim","id":"12235","last_name":"Stiebing","first_name":"Achim"},{"full_name":"Lautenschläger, Ralf","last_name":"Lautenschläger","id":"62087","first_name":"Ralf"},{"full_name":"Upmann, Matthias","last_name":"Upmann","id":"12666","first_name":"Matthias"}],"conference":{"name":"DLG-Forum kompakt: Fleischtechnologie – Technologie der Eberfleischverarbeitung","start_date":"2017-03-21","end_date":"2017-03-21","location":" Bad Salzuflen"},"_id":"2624","status":"public","department":[{"_id":"DEP4019"}],"user_id":"83778","year":"2017"},{"publication_identifier":{"issn":["0015-363x"]},"author":[{"first_name":"Gerd","full_name":"Weyland, Gerd","id":"52116","last_name":"Weyland"},{"id":"12666","last_name":"Upmann","full_name":"Upmann, Matthias","first_name":"Matthias"}],"type":"journal_article","intvolume":" 97","language":[{"iso":"ger"}],"date_created":"2020-05-27T08:07:07Z","publication_status":"published","volume":97,"citation":{"ieee":"G. Weyland and M. Upmann, “Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost,” Fleischwirtschaft, vol. 97, no. 7, pp. 60–64, 2017.","ama":"Weyland G, Upmann M. Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost. Fleischwirtschaft. 2017;97(7):60-64.","van":"Weyland G, Upmann M. Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost. Fleischwirtschaft. 2017;97(7):60–4.","din1505-2-1":"Weyland, Gerd ; Upmann, Matthias: Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost. In: Fleischwirtschaft Bd. 97 (2017), Nr. 7, S. 60–64","bjps":"Weyland G and Upmann M (2017) Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost. Fleischwirtschaft 97, 60–64.","chicago":"Weyland, Gerd, and Matthias Upmann. “Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost.” Fleischwirtschaft 97, no. 7 (2017): 60–64.","havard":"G. Weyland, M. Upmann, Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost, Fleischwirtschaft. 97 (2017) 60–64.","mla":"Weyland, Gerd, and Matthias Upmann. “Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost.” Fleischwirtschaft, vol. 97, no. 7, 2017, pp. 60–64.","apa":"Weyland, G., & Upmann, M. (2017). Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost. Fleischwirtschaft, 97(7), 60–64.","short":"G. Weyland, M. Upmann, Fleischwirtschaft 97 (2017) 60–64.","chicago-de":"Weyland, Gerd und Matthias Upmann. 2017. Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost. Fleischwirtschaft 97, Nr. 7: 60–64.","ufg":"Weyland, Gerd/Upmann, Matthias (2017): Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost, in: Fleischwirtschaft 97 (7), S. 60–64."},"issue":"7","title":"Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost","date_updated":"2023-03-15T13:49:41Z","department":[{"_id":"DEP4019"}],"user_id":"79260","year":2017,"publication":"Fleischwirtschaft","status":"public","_id":"2625","page":"60-64"},{"page":"44-50","_id":"2626","status":"public","publication":"Fleischwirtschaft","user_id":"79260","year":2017,"department":[{"_id":"DEP4019"}],"date_updated":"2023-03-15T13:49:41Z","title":"Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost","issue":"8","citation":{"bjps":"Weyland G and Upmann M (2017) Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost. Fleischwirtschaft 97, 44–50.","din1505-2-1":"Weyland, Gerd ; Upmann, Matthias: Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost. In: Fleischwirtschaft Bd. 97 (2017), Nr. 8, S. 44–50","chicago":"Weyland, Gerd, and Matthias Upmann. “Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost.” Fleischwirtschaft 97, no. 8 (2017): 44–50.","ieee":"G. Weyland and M. Upmann, “Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost,” Fleischwirtschaft, vol. 97, no. 8, pp. 44–50, 2017.","van":"Weyland G, Upmann M. Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost. Fleischwirtschaft. 2017;97(8):44–50.","ama":"Weyland G, Upmann M. Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost. Fleischwirtschaft. 2017;97(8):44-50.","short":"G. Weyland, M. Upmann, Fleischwirtschaft 97 (2017) 44–50.","apa":"Weyland, G., & Upmann, M. (2017). Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost. Fleischwirtschaft, 97(8), 44–50.","mla":"Weyland, Gerd, and Matthias Upmann. “Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost.” Fleischwirtschaft, vol. 97, no. 8, 2017, pp. 44–50.","ufg":"Weyland, Gerd/Upmann, Matthias (2017): Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost, in: Fleischwirtschaft 97 (8), S. 44–50.","chicago-de":"Weyland, Gerd und Matthias Upmann. 2017. Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost. Fleischwirtschaft 97, Nr. 8: 44–50.","havard":"G. Weyland, M. Upmann, Was ist erlaubt, was verboten? 13. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost, Fleischwirtschaft. 97 (2017) 44–50."},"volume":97,"publication_status":"published","date_created":"2020-05-27T08:08:44Z","language":[{"iso":"ger"}],"intvolume":" 97","author":[{"full_name":"Weyland, Gerd","id":"52116","last_name":"Weyland","first_name":"Gerd"},{"first_name":"Matthias","full_name":"Upmann, Matthias","id":"12666","last_name":"Upmann"}],"type":"journal_article","publication_identifier":{"issn":["0015-363x"]}},{"date_updated":"2024-05-17T12:49:24Z","title":"Digitale Knochenpartikelanalyse","author":[{"first_name":"T.","full_name":"Fencher, T.","last_name":"Fencher"},{"full_name":"Upmann, Matthias","id":"12666","last_name":"Upmann","first_name":"Matthias"}],"type":"conference","citation":{"mla":"Fencher, T., and Matthias Upmann. Digitale Knochenpartikelanalyse. 2017.","apa":"Fencher, T., & Upmann, M. (2017). Digitale Knochenpartikelanalyse. 58. Arbeitstagung des  Arbeitsgebietes “Lebensmittelhygiene,” Garmisch-Partenkirchen.","short":"T. Fencher, M. Upmann, in: 2017.","chicago-de":"Fencher, T. und Matthias Upmann. 2017. Digitale Knochenpartikelanalyse. In: .","ufg":"Fencher, T./Upmann, Matthias: Digitale Knochenpartikelanalyse, in: o. Hg.: o. O. 2017.","havard":"T. Fencher, M. Upmann, Digitale Knochenpartikelanalyse, in: 2017.","din1505-2-1":"Fencher, T. ; Upmann, Matthias: Digitale Knochenpartikelanalyse. In: , 2017","bjps":"Fencher T and Upmann M (2017) Digitale Knochenpartikelanalyse.","chicago":"Fencher, T., and Matthias Upmann. “Digitale Knochenpartikelanalyse,” 2017.","ieee":"T. Fencher and M. Upmann, “Digitale Knochenpartikelanalyse,” presented at the 58. Arbeitstagung des  Arbeitsgebietes “Lebensmittelhygiene,” Garmisch-Partenkirchen, 2017.","van":"Fencher T, Upmann M. Digitale Knochenpartikelanalyse. In 2017.","ama":"Fencher T, Upmann M. Digitale Knochenpartikelanalyse. In: ; 2017."},"publication_status":"published","language":[{"iso":"ger"}],"date_created":"2020-05-27T08:10:46Z","_id":"2627","conference":{"location":"Garmisch-Partenkirchen","name":"58. Arbeitstagung des Arbeitsgebietes \"Lebensmittelhygiene\"","end_date":"2017-09-29","start_date":"2017-09-26"},"user_id":"83778","year":"2017","department":[{"_id":"DEP4019"}],"status":"public"},{"user_id":"83778","year":"2017","department":[{"_id":"DEP4019"}],"status":"public","_id":"2628","conference":{"location":"Garmisch-Partenkirchen","start_date":"2017-09-26","end_date":"2017-09-29","name":"58. Arbeitstagung des Arbeitsgebietes \"Lebensmittelhygiene\""},"author":[{"first_name":"T.","last_name":"Fencher","full_name":"Fencher, T."},{"full_name":"Röser, Anja","id":"12158","last_name":"Röser","first_name":"Anja"},{"first_name":"Matthias","full_name":"Upmann, Matthias","last_name":"Upmann","id":"12666"}],"type":"conference","citation":{"havard":"T. Fencher, A. Röser, M. Upmann, Histologische Knochenpartikelfärbungen im Vergleich – Genauigkeit von Alizarin, Kossa und Co. , in: 2017.","mla":"Fencher, T., et al. Histologische Knochenpartikelfärbungen im Vergleich – Genauigkeit von Alizarin, Kossa und Co. . 2017.","apa":"Fencher, T., Röser, A., & Upmann, M. (2017). Histologische Knochenpartikelfärbungen im Vergleich – Genauigkeit von Alizarin, Kossa und Co. . 58. Arbeitstagung des  Arbeitsgebietes “Lebensmittelhygiene,” Garmisch-Partenkirchen.","short":"T. Fencher, A. Röser, M. Upmann, in: 2017.","chicago-de":"Fencher, T., Anja Röser und Matthias Upmann. 2017. Histologische Knochenpartikelfärbungen im Vergleich – Genauigkeit von Alizarin, Kossa und Co. . In: .","ufg":"Fencher, T./Röser, Anja/Upmann, Matthias: Histologische Knochenpartikelfärbungen im Vergleich – Genauigkeit von Alizarin, Kossa und Co. , in: o. Hg.: o. O. 2017.","ieee":"T. Fencher, A. Röser, and M. Upmann, “Histologische Knochenpartikelfärbungen im Vergleich – Genauigkeit von Alizarin, Kossa und Co. ,” presented at the 58. Arbeitstagung des  Arbeitsgebietes “Lebensmittelhygiene,” Garmisch-Partenkirchen, 2017.","ama":"Fencher T, Röser A, Upmann M. Histologische Knochenpartikelfärbungen im Vergleich – Genauigkeit von Alizarin, Kossa und Co. . In: ; 2017.","van":"Fencher T, Röser A, Upmann M. Histologische Knochenpartikelfärbungen im Vergleich – Genauigkeit von Alizarin, Kossa und Co. . In 2017.","din1505-2-1":"Fencher, T. ; Röser, Anja ; Upmann, Matthias: Histologische Knochenpartikelfärbungen im Vergleich – Genauigkeit von Alizarin, Kossa und Co. . In: , 2017","bjps":"Fencher T, Röser A and Upmann M (2017) Histologische Knochenpartikelfärbungen im Vergleich – Genauigkeit von Alizarin, Kossa und Co. .","chicago":"Fencher, T., Anja Röser, and Matthias Upmann. “Histologische Knochenpartikelfärbungen im Vergleich – Genauigkeit von Alizarin, Kossa und Co. ,” 2017."},"language":[{"iso":"ger"}],"date_created":"2020-05-27T08:13:02Z","publication_status":"published","date_updated":"2024-05-17T12:49:46Z","title":"Histologische Knochenpartikelfärbungen im Vergleich – Genauigkeit von Alizarin, Kossa und Co. "},{"status":"public","department":[{"_id":"DEP4019"}],"year":"2017","user_id":"83778","conference":{"name":"VDF-BvdF Jahrestagung","end_date":"2017-05-19","start_date":"2017-05-18","location":"Berlin"},"_id":"2629","date_created":"2020-05-27T08:15:11Z","language":[{"iso":"eng"}],"citation":{"mla":"Upmann, Matthias, and M. Langen. Separation von Fleischstandards. Anforderungen an Ausgangsmaterial, Prozesse Und Produkte. 2017.","apa":"Upmann, M., & Langen, M. (2017). Separation von Fleischstandards. Anforderungen an Ausgangsmaterial, Prozesse und Produkte. VDF-BvdF Jahrestagung, Berlin.","short":"M. Upmann, M. Langen, in: 2017.","chicago-de":"Upmann, Matthias und M. Langen. 2017. Separation von Fleischstandards. Anforderungen an Ausgangsmaterial, Prozesse und Produkte. In: .","ufg":"Upmann, Matthias/Langen, M.: Separation von Fleischstandards. Anforderungen an Ausgangsmaterial, Prozesse und Produkte, in: o. Hg.: o. O. 2017.","havard":"M. Upmann, M. Langen, Separation von Fleischstandards. Anforderungen an Ausgangsmaterial, Prozesse und Produkte, in: 2017.","din1505-2-1":"Upmann, Matthias ; Langen, M.: Separation von Fleischstandards. Anforderungen an Ausgangsmaterial, Prozesse und Produkte. In: , 2017","bjps":"Upmann M and Langen M (2017) Separation von Fleischstandards. Anforderungen an Ausgangsmaterial, Prozesse Und Produkte.","chicago":"Upmann, Matthias, and M. Langen. “Separation von Fleischstandards. Anforderungen an Ausgangsmaterial, Prozesse Und Produkte,” 2017.","ieee":"M. Upmann and M. Langen, “Separation von Fleischstandards. Anforderungen an Ausgangsmaterial, Prozesse und Produkte,” presented at the VDF-BvdF Jahrestagung, Berlin, 2017.","van":"Upmann M, Langen M. Separation von Fleischstandards. Anforderungen an Ausgangsmaterial, Prozesse und Produkte. In 2017.","ama":"Upmann M, Langen M. Separation von Fleischstandards. Anforderungen an Ausgangsmaterial, Prozesse und Produkte. In: ; 2017."},"author":[{"full_name":"Upmann, Matthias","last_name":"Upmann","id":"12666","first_name":"Matthias"},{"first_name":"M.","full_name":"Langen, M.","last_name":"Langen"}],"type":"conference","title":"Separation von Fleischstandards. Anforderungen an Ausgangsmaterial, Prozesse und Produkte","date_updated":"2024-05-17T12:50:07Z"},{"article_type":"letter_note","related_material":{"link":[{"url":"http://refa-blog.de/gestaltung-von-montageassistenzsystemen","relation":"contains"}]},"title":"Anforderungsgerechte Gestaltung von Montageassistenzsystemen","main_file_link":[{"url":"http://refa-blog.de/gestaltung-von-montageassistenzsystemen","open_access":"1"}],"date_updated":"2023-03-15T13:49:41Z","type":"journal_article","author":[{"first_name":"Sven","last_name":"Hinrichsen","id":"49010","full_name":"Hinrichsen, Sven"},{"first_name":"Daniel","full_name":"Riediger, Daniel","id":"52263","last_name":"Riediger"},{"id":"44663","last_name":"Unrau","full_name":"Unrau, Daniel","first_name":"Daniel"}],"language":[{"iso":"ger"}],"date_created":"2018-11-26T11:01:42Z","citation":{"ieee":"S. Hinrichsen, D. Riediger, and D. Unrau, “Anforderungsgerechte Gestaltung von Montageassistenzsystemen,” REFA Blog - Informations- und Kommunikationsmedium von REFA, 2017.","havard":"S. Hinrichsen, D. Riediger, D. Unrau, Anforderungsgerechte Gestaltung von Montageassistenzsystemen, REFA Blog - Informations- und Kommunikationsmedium von REFA. (2017).","van":"Hinrichsen S, Riediger D, Unrau D. Anforderungsgerechte Gestaltung von Montageassistenzsystemen. REFA Blog - Informations- und Kommunikationsmedium von REFA. 2017;","ama":"Hinrichsen S, Riediger D, Unrau D. Anforderungsgerechte Gestaltung von Montageassistenzsystemen. REFA Blog - Informations- und Kommunikationsmedium von REFA. 2017.","din1505-2-1":"Hinrichsen, Sven ; Riediger, Daniel ; Unrau, Daniel: Anforderungsgerechte Gestaltung von Montageassistenzsystemen. In: REFA Blog - Informations- und Kommunikationsmedium von REFA. Darmstadt (2017)","mla":"Hinrichsen, Sven, et al. “Anforderungsgerechte Gestaltung von Montageassistenzsystemen.” REFA Blog - Informations- und Kommunikationsmedium von REFA, 2017.","apa":"Hinrichsen, S., Riediger, D., & Unrau, D. (2017). Anforderungsgerechte Gestaltung von Montageassistenzsystemen. REFA Blog - Informations- und Kommunikationsmedium von REFA.","short":"S. Hinrichsen, D. Riediger, D. Unrau, REFA Blog - Informations- und Kommunikationsmedium von REFA (2017).","bjps":"Hinrichsen S, Riediger D and Unrau D (2017) Anforderungsgerechte Gestaltung von Montageassistenzsystemen. REFA Blog - Informations- und Kommunikationsmedium von REFA.","chicago-de":"Hinrichsen, Sven, Daniel Riediger und Daniel Unrau. 2017. Anforderungsgerechte Gestaltung von Montageassistenzsystemen. REFA Blog - Informations- und Kommunikationsmedium von REFA.","chicago":"Hinrichsen, Sven, Daniel Riediger, and Daniel Unrau. “Anforderungsgerechte Gestaltung von Montageassistenzsystemen.” REFA Blog - Informations- und Kommunikationsmedium von REFA, 2017.","ufg":"Hinrichsen, Sven et. al. (2017): Anforderungsgerechte Gestaltung von Montageassistenzsystemen, in: REFA Blog - Informations- und Kommunikationsmedium von REFA."},"place":"Darmstadt","oa":"1","_id":"263","department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"user_id":"45673","year":2017,"publication":"REFA Blog - Informations- und Kommunikationsmedium von REFA","status":"public"},{"_id":"2631","page":"2-4","year":"2017","user_id":"83778","department":[{"_id":"DEP4019"}],"status":"public","publication":"Animal Frontiers","date_updated":"2024-05-17T12:50:50Z","title":"How meat is defined in the European Union and in Germany","author":[{"first_name":"Ralf","last_name":"Lautenschläger","id":"62087","full_name":"Lautenschläger, Ralf"},{"first_name":"Matthias","full_name":"Upmann, Matthias","last_name":"Upmann","id":"12666"}],"intvolume":" 1","type":"journal_article","citation":{"bjps":"Lautenschläger R and Upmann M (2017) How Meat Is Defined in the European Union and in Germany. Animal Frontiers 1, 2–4.","din1505-2-1":"Lautenschläger, Ralf ; Upmann, Matthias: How meat is defined in the European Union and in Germany. In: Animal Frontiers Bd. 1 (2017), S. 2–4","chicago":"Lautenschläger, Ralf, and Matthias Upmann. “How Meat Is Defined in the European Union and in Germany.” Animal Frontiers 1 (2017): 2–4.","ieee":"R. Lautenschläger and M. Upmann, “How meat is defined in the European Union and in Germany,” Animal Frontiers, vol. 1, pp. 2–4, 2017.","van":"Lautenschläger R, Upmann M. How meat is defined in the European Union and in Germany. Animal Frontiers. 2017;1:2–4.","ama":"Lautenschläger R, Upmann M. How meat is defined in the European Union and in Germany. Animal Frontiers. 2017;1:2-4.","short":"R. Lautenschläger, M. Upmann, Animal Frontiers 1 (2017) 2–4.","mla":"Lautenschläger, Ralf, and Matthias Upmann. “How Meat Is Defined in the European Union and in Germany.” Animal Frontiers, vol. 1, 2017, pp. 2–4.","apa":"Lautenschläger, R., & Upmann, M. (2017). How meat is defined in the European Union and in Germany. Animal Frontiers, 1, 2–4.","ufg":"Lautenschläger, Ralf/Upmann, Matthias: How meat is defined in the European Union and in Germany, in: Animal Frontiers 1 (2017),  S. 2–4.","chicago-de":"Lautenschläger, Ralf und Matthias Upmann. 2017. How meat is defined in the European Union and in Germany. Animal Frontiers 1: 2–4.","havard":"R. Lautenschläger, M. Upmann, How meat is defined in the European Union and in Germany, Animal Frontiers. 1 (2017) 2–4."},"volume":1,"publication_status":"published","language":[{"iso":"eng"}],"date_created":"2020-05-27T08:17:35Z"},{"status":"public","department":[{"_id":"DEP4019"}],"user_id":"83778","year":"2017","conference":{"name":"Fachbesprechung Lebensmittelüberwachung/Veterinärwesen","start_date":"2017-06-27","end_date":"2017-06-27","location":"Bochum"},"_id":"2633","publication_status":"published","language":[{"iso":"ger"}],"date_created":"2020-05-27T08:19:30Z","citation":{"apa":"Upmann, M. (2017). Verarbeitung von Eberfleisch. Auswirkungen auf die Qualität von Fleischprodukten. Fachbesprechung Lebensmittelüberwachung/Veterinärwesen, Bochum.","mla":"Upmann, Matthias. Verarbeitung von Eberfleisch. Auswirkungen auf die Qualität von Fleischprodukten. 2017.","din1505-2-1":"Upmann, Matthias: Verarbeitung von Eberfleisch. Auswirkungen auf die Qualität von Fleischprodukten. In: , 2017","bjps":"Upmann M (2017) Verarbeitung von Eberfleisch. Auswirkungen auf die Qualität von Fleischprodukten.","short":"M. Upmann, in: 2017.","chicago":"Upmann, Matthias. “Verarbeitung von Eberfleisch. Auswirkungen auf die Qualität von Fleischprodukten,” 2017.","chicago-de":"Upmann, Matthias. 2017. Verarbeitung von Eberfleisch. Auswirkungen auf die Qualität von Fleischprodukten. In: .","ufg":"Upmann, Matthias: Verarbeitung von Eberfleisch. Auswirkungen auf die Qualität von Fleischprodukten, in: o. Hg.: o. O. 2017.","havard":"M. Upmann, Verarbeitung von Eberfleisch. Auswirkungen auf die Qualität von Fleischprodukten, in: 2017.","ieee":"M. Upmann, “Verarbeitung von Eberfleisch. Auswirkungen auf die Qualität von Fleischprodukten,” presented at the Fachbesprechung Lebensmittelüberwachung/Veterinärwesen, Bochum, 2017.","ama":"Upmann M. Verarbeitung von Eberfleisch. Auswirkungen auf die Qualität von Fleischprodukten. In: ; 2017.","van":"Upmann M. Verarbeitung von Eberfleisch. Auswirkungen auf die Qualität von Fleischprodukten. In 2017."},"type":"conference","author":[{"first_name":"Matthias","full_name":"Upmann, Matthias","last_name":"Upmann","id":"12666"}],"title":"Verarbeitung von Eberfleisch. Auswirkungen auf die Qualität von Fleischprodukten","date_updated":"2024-05-17T12:51:21Z"},{"title":"Muscle cell integrity – crucial for meat product quality?","date_updated":"2024-05-17T12:51:46Z","author":[{"first_name":"Matthias","id":"12666","last_name":"Upmann","full_name":"Upmann, Matthias"}],"type":"conference","publication_status":"published","date_created":"2020-05-27T08:21:18Z","language":[{"iso":"eng"}],"citation":{"havard":"M. Upmann, Muscle cell integrity – crucial for meat product quality?, in: 2017.","ieee":"M. Upmann, “Muscle cell integrity – crucial for meat product quality?,” presented at the Swiss Food Science Meeting 2017, Neuchâtel , 2017.","ama":"Upmann M. Muscle cell integrity – crucial for meat product quality? In: ; 2017.","van":"Upmann M. Muscle cell integrity – crucial for meat product quality? In 2017.","apa":"Upmann, M. (2017). Muscle cell integrity – crucial for meat product quality? Swiss Food Science Meeting 2017, Neuchâtel .","mla":"Upmann, Matthias. Muscle Cell Integrity – Crucial for Meat Product Quality? 2017.","din1505-2-1":"Upmann, Matthias: Muscle cell integrity – crucial for meat product quality? In: , 2017","short":"M. Upmann, in: 2017.","bjps":"Upmann M (2017) Muscle Cell Integrity – Crucial for Meat Product Quality?","chicago":"Upmann, Matthias. “Muscle Cell Integrity – Crucial for Meat Product Quality?,” 2017.","chicago-de":"Upmann, Matthias. 2017. Muscle cell integrity – crucial for meat product quality? In: .","ufg":"Upmann, Matthias: Muscle cell integrity – crucial for meat product quality?, in: o. Hg.: o. O. 2017."},"_id":"2635","conference":{"end_date":"2017-08-18","start_date":"2017-08-17","name":"Swiss Food Science Meeting 2017","location":" Neuchâtel "},"department":[{"_id":"DEP4019"}],"user_id":"83778","year":"2017","status":"public"},{"title":"Qualitätsprodukte aus dem Fleisch von Bruderhähnen - Realität oder Fiktion?","date_updated":"2024-05-17T12:52:16Z","language":[{"iso":"ger"}],"date_created":"2020-05-27T08:23:09Z","publication_status":"published","citation":{"havard":"M. Upmann, R. Lautenschläger, Qualitätsprodukte aus dem Fleisch von Bruderhähnen - Realität oder Fiktion?, in: 2017.","chicago-de":"Upmann, Matthias und Ralf Lautenschläger. 2017. Qualitätsprodukte aus dem Fleisch von Bruderhähnen - Realität oder Fiktion? In: .","ufg":"Upmann, Matthias/Lautenschläger, Ralf: Qualitätsprodukte aus dem Fleisch von Bruderhähnen - Realität oder Fiktion?, in: o. Hg.: o. O. 2017.","mla":"Upmann, Matthias, and Ralf Lautenschläger. Qualitätsprodukte aus dem Fleisch von Bruderhähnen - Realität oder Fiktion? 2017.","apa":"Upmann, M., & Lautenschläger, R. (2017). Qualitätsprodukte aus dem Fleisch von Bruderhähnen - Realität oder Fiktion? 40. LAFF-Tagung Fleisch + Feinkost, Lemgo.","short":"M. Upmann, R. Lautenschläger, in: 2017.","van":"Upmann M, Lautenschläger R. Qualitätsprodukte aus dem Fleisch von Bruderhähnen - Realität oder Fiktion? In 2017.","ama":"Upmann M, Lautenschläger R. Qualitätsprodukte aus dem Fleisch von Bruderhähnen - Realität oder Fiktion? In: ; 2017.","ieee":"M. Upmann and R. Lautenschläger, “Qualitätsprodukte aus dem Fleisch von Bruderhähnen - Realität oder Fiktion?,” presented at the 40. LAFF-Tagung Fleisch + Feinkost, Lemgo, 2017.","chicago":"Upmann, Matthias, and Ralf Lautenschläger. “Qualitätsprodukte aus dem Fleisch von Bruderhähnen - Realität oder Fiktion?,” 2017.","din1505-2-1":"Upmann, Matthias ; Lautenschläger, Ralf: Qualitätsprodukte aus dem Fleisch von Bruderhähnen - Realität oder Fiktion? In: , 2017","bjps":"Upmann M and Lautenschläger R (2017) Qualitätsprodukte aus dem Fleisch von Bruderhähnen - Realität oder Fiktion?"},"author":[{"last_name":"Upmann","id":"12666","full_name":"Upmann, Matthias","first_name":"Matthias"},{"first_name":"Ralf","last_name":"Lautenschläger","id":"62087","full_name":"Lautenschläger, Ralf"}],"type":"conference","conference":{"location":"Lemgo","start_date":"2017-11-06","end_date":"2017-11-06","name":"40. LAFF-Tagung Fleisch + Feinkost"},"_id":"2638","status":"public","department":[{"_id":"DEP4019"}],"user_id":"83778","year":"2017"},{"_id":"265","publication":"2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)","title":"Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools","date_created":"2018-11-26T11:59:27Z","language":[{"iso":"eng"}],"citation":{"chicago":"Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools.” In 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), edited by IEEE/ IEEM, 1571–75. Danvers, 2017. https://doi.org/10.1109/IEEM.2017.8290157.","bjps":"Hinrichsen S, Riediger D and Unrau A (2017) Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (ed.), 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Danvers, pp. 1571–1575.","din1505-2-1":"Hinrichsen, Sven ; Riediger, Daniel ; Unrau, Alexander: Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In: IEEE/ IEEM (Hrsg.): 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Danvers, 2017, S. 1571–1575","van":"Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, editor. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Danvers; 2017. p. 1571–5.","ama":"Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, ed. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Danvers; 2017:1571-1575. doi:https://doi.org/10.1109/IEEM.2017.8290157","ieee":"S. Hinrichsen, D. Riediger, and A. Unrau, “Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools,” in 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore, 2017, no. 1, pp. 1571–1575.","ufg":"Hinrichsen, Sven et. al. (2017): Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Hg.): 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Danvers, S. 1571–1575.","chicago-de":"Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2017. Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In: 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), hg. von IEEE/ IEEM, 1571–1575. Danvers. doi:https://doi.org/10.1109/IEEM.2017.8290157, .","short":"S. Hinrichsen, D. Riediger, A. Unrau, in: IEEE/ IEEM (Ed.), 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Danvers, 2017, pp. 1571–1575.","apa":"Hinrichsen, S., Riediger, D., & Unrau, A. (2017). Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (Ed.), 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (pp. 1571–1575). Danvers. https://doi.org/10.1109/IEEM.2017.8290157","mla":"Hinrichsen, Sven, et al. “Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools.” 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), edited by IEEE/ IEEM, no. 1, 2017, pp. 1571–75, doi:https://doi.org/10.1109/IEEM.2017.8290157.","havard":"S. Hinrichsen, D. Riediger, A. Unrau, Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Ed.), 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Danvers, 2017: pp. 1571–1575."},"place":"Danvers","ddc":["620"],"publication_identifier":{"isbn":["978-1-5386-0948-4 "]},"author":[{"first_name":"Sven","full_name":"Hinrichsen, Sven","id":"49010","last_name":"Hinrichsen"},{"last_name":"Riediger","id":"52263","full_name":"Riediger, Daniel","first_name":"Daniel"},{"id":"64690","last_name":"Unrau","full_name":"Unrau, Alexander","first_name":"Alexander"}],"page":"1571-1575","conference":{"location":"Singapore","name":"IEEE International Conference on Industrial Engineering and Engineering Management ","end_date":"2017-12-13","start_date":"2017-12-10"},"abstract":[{"lang":"eng","text":"The maintenance of a tool for injection molding or forming is usually accompanied by its disassembly and assembly. The duration of the assembly activities is often a large part of the total activity time for the maintenance of the tool. The degree of performance of the employees in the execution of these disassembly and assembly activities is often low. In addition, allowances occur (e.g. searching for work equipment). At the Industrial Engineering Lab of the Ostwestfalen-Lippe University of Applied Sciences, a prototype of an assistance system was developed to support the assembly activities in toolmaking. With the help of this system, the operator is guided step by step through the assembly process. The economic potential of the system exists in the reduction of training times, the avoidance of assembly errors and the increase of labor productivity."}],"keyword":["injection moulding","machine tools","maintenance engineering","productivity","projection-based assistance system","injection molding tools","assembly activities","assembly process","assembly errors","tool maintenance","disassembly activities","economic potential","Industrial Engineering Lab","Ostwestfalen-Lippe University of Applied Sciences","toolmaking","Tools","Injection molding","Maintenance engineering","Usability","Task analysis","Workstations","Morphology","assembly assistance systems","assistance systems","maintenance of injection molding tools","manual assembly"],"status":"public","corporate_editor":["IEEE/ IEEM"],"department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"year":2017,"user_id":"74004","quality_controlled":"1","date_updated":"2023-03-15T13:49:41Z","doi":"https://doi.org/10.1109/IEEM.2017.8290157","issue":"1","type":"conference"},{"title":"Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage","publication_identifier":{"isbn":["978-3-936804-22-5"]},"ddc":["620"],"author":[{"full_name":"Kleineberg, Tim","id":"65024","last_name":"Kleineberg","first_name":"Tim"},{"first_name":"Sven","last_name":"Hinrichsen","id":"49010","full_name":"Hinrichsen, Sven"},{"first_name":"Oliver","last_name":"Niggemann","id":"10876","full_name":"Niggemann, Oliver"}],"publication_status":"published","language":[{"iso":"ger"}],"date_created":"2018-11-26T15:07:37Z","citation":{"van":"Kleineberg T, Hinrichsen S, Niggemann O. Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage. In: Gesellschaft für Arbeitswissenschaft e.V (GfA), editor. Bericht zum 63 Frühjahrskongress der Gesellschaft für Arbeitswissenschaft eV. Dortmund: GfA-Press; 2017.","ama":"Kleineberg T, Hinrichsen S, Niggemann O. Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage. In: Gesellschaft für Arbeitswissenschaft e.V (GfA), ed. Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. Dortmund: GfA-Press; 2017.","ieee":"T. Kleineberg, S. Hinrichsen, and O. Niggemann, “Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage,” in Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V., Brugg-Windisch, 2017, no. 30.","havard":"T. Kleineberg, S. Hinrichsen, O. Niggemann, Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage, in: Gesellschaft für Arbeitswissenschaft e.V (GfA) (Ed.), Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V., GfA-Press, Dortmund, 2017.","ufg":"Kleineberg, Tim et. al. (2017): Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage, in: Gesellschaft für Arbeitswissenschaft e.V (GfA) (Hg.): Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V., Dortmund.","chicago-de":"Kleineberg, Tim, Sven Hinrichsen und Oliver Niggemann. 2017. Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage. In: Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V., hg. von Gesellschaft für Arbeitswissenschaft e.V (GfA). Dortmund: GfA-Press.","chicago":"Kleineberg, Tim, Sven Hinrichsen, and Oliver Niggemann. “Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage.” In Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V., edited by Gesellschaft für Arbeitswissenschaft e.V (GfA). Dortmund: GfA-Press, 2017.","bjps":"Kleineberg T, Hinrichsen S and Niggemann O (2017) Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage. In Gesellschaft für Arbeitswissenschaft e.V (GfA) (ed.), Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. Dortmund: GfA-Press.","short":"T. Kleineberg, S. Hinrichsen, O. Niggemann, in: Gesellschaft für Arbeitswissenschaft e.V (GfA) (Ed.), Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V., GfA-Press, Dortmund, 2017.","din1505-2-1":"Kleineberg, Tim ; Hinrichsen, Sven ; Niggemann, Oliver: Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage. In: Gesellschaft für Arbeitswissenschaft e.V (GfA) (Hrsg.): Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V.. Dortmund : GfA-Press, 2017","apa":"Kleineberg, T., Hinrichsen, S., & Niggemann, O. (2017). Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage. In Gesellschaft für Arbeitswissenschaft e.V (GfA) (Ed.), Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. Dortmund: GfA-Press.","mla":"Kleineberg, Tim, et al. “Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage.” Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V., edited by Gesellschaft für Arbeitswissenschaft e.V (GfA), no. 30, GfA-Press, 2017."},"place":"Dortmund","_id":"267","publication":"Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V.","issue":"30","date_updated":"2023-03-15T13:49:42Z","type":"conference","publisher":"GfA-Press","conference":{"location":"Brugg-Windisch","name":"Soziotechnische Gestaltung des digitalen Wandels - Kreativ, Innovativ, Sinnhaft ","start_date":"2017-02-15","end_date":"2017-02-17"},"abstract":[{"lang":"ger","text":"Sich verkürzende Innovations- und Produktlebenszyklen sowie eine zunehmende Variantenvielfalt verbunden mit kleineren Losgrößen bis hin zur kundenindividuellen Produktkonfiguration führen zu veränderten Anforderungen an die Gestaltung von Montagesystemen. Gleichzeitig bieten technologische Entwicklungen auf dem Gebiet der Assistenzsysteme neue Gestaltungsmöglichkeiten, Beschäftigte bei der Ausführung ihrer Arbeitsprozesse zu unterstützten. Der vorliegende Beitrag zeigt anhand eines Fallbeispiels, eines Montagearbeitsplatzes aus der SmartFactoryOWL in Lemgo, wie ein Montagearbeitsplatz über Assistenzfunktionen weiter entwickelt wurde und welche Auswirkungen diese Entwicklungen auf die Arbeit haben. Der Arbeitsplatz wurde im Rahmen eines Kooperationsprojektes des Labors für Industrial Engineering der Hochschule Ostwestfalen-Lippe und der Unternehmen Turck und Brandt Kantentechnik in der SmartFactory-OWL realisiert. Er verfügt über ein Assistenzsystem, welches dem Monteur auftrags- und arbeitsschrittbezogene Informationen bereitstellt. Das System besteht maßgeblich aus einem Pick-to-light System verbunden mit einem Touchscreen zur Visualisierung der Informationen. Der Montageauftrag wird über eine RFID-Applikation angemeldet. Damit lassen sich neue Produktvarianten flexibel hinzufügen und bestehende ändern. Zudem können die über Sensoren erfassten Daten zu Kennzahlen aggregiert und entsprechend der Anforderungen der Nutzer visualisiert werden. Im Rahmen des Beitrages werden die Auswirkungen dieser technologischen Weiterentwicklungen auf die Arbeit erörtert."}],"corporate_editor":["Gesellschaft für Arbeitswissenschaft e.V (GfA)"],"department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"user_id":"49010","year":2017,"status":"public"},{"oa":"1","_id":"2682","edition":"28","title":"Plümecke – Preisermittlung für Bauarbeiten","main_file_link":[{"open_access":"1","url":"https://content-select.com/de/portal/media/view/5fbcfd08-784c-488f-9bfb-35b7b0dd2d03?forceauth=1"}],"publication_identifier":{"isbn":["978-3-481-03247-0"],"eisbn":["978-3-481-02948-7","978-3-481-03249-4"]},"author":[{"full_name":"Ernesti, Werner","last_name":"Ernesti","first_name":"Werner"},{"first_name":"Heinrich","full_name":"Holch, Heinrich","last_name":"Holch"},{"last_name":"Kattenbusch","full_name":"Kattenbusch, Markus","first_name":"Markus"},{"last_name":"Keren","full_name":"Keren, Franz","first_name":"Franz"},{"first_name":"Hilmar","full_name":"Klein, Hilmar","last_name":"Klein"},{"first_name":"Dieter","full_name":"Kuhlenkamp, Dieter","last_name":"Kuhlenkamp"},{"first_name":"Volker","full_name":"Kuhne, Volker","last_name":"Kuhne"},{"first_name":"Helmhard","full_name":"Neuenhagen, Helmhard","last_name":"Neuenhagen"},{"full_name":"Noosten, Dirk","id":"23470","last_name":"Noosten","first_name":"Dirk"},{"first_name":"Edgar","full_name":"Ohland, Edgar","last_name":"Ohland"},{"first_name":"Hans","last_name":"Stiglocher","full_name":"Stiglocher, Hans"},{"last_name":"Kugelmann","full_name":"Kugelmann, Adolf","first_name":"Adolf"}],"date_created":"2020-05-27T11:38:31Z","language":[{"iso":"ger"}],"publication_status":"published","place":"Köln","citation":{"ufg":"Ernesti, Werner u. a.: Plümecke – Preisermittlung für Bauarbeiten, Köln 282017.","chicago-de":"Ernesti, Werner, Heinrich Holch, Markus Kattenbusch, Franz Keren, Hilmar Klein, Dieter Kuhlenkamp, Volker Kuhne, u. a. 2017. Plümecke – Preisermittlung für Bauarbeiten. 28. Aufl. Köln: Müller.","chicago":"Ernesti, Werner, Heinrich Holch, Markus Kattenbusch, Franz Keren, Hilmar Klein, Dieter Kuhlenkamp, Volker Kuhne, et al. Plümecke – Preisermittlung für Bauarbeiten. 28th ed. Köln: Müller, 2017.","short":"W. Ernesti, H. Holch, M. Kattenbusch, F. Keren, H. Klein, D. Kuhlenkamp, V. Kuhne, H. Neuenhagen, D. Noosten, E. Ohland, H. Stiglocher, A. Kugelmann, Plümecke – Preisermittlung für Bauarbeiten, 28th ed., Müller, Köln, 2017.","bjps":"Ernesti W et al. (2017) Plümecke – Preisermittlung für Bauarbeiten, 28th ed. Köln: Müller.","mla":"Ernesti, Werner, et al. Plümecke – Preisermittlung für Bauarbeiten. 28th ed., Müller, 2017.","apa":"Ernesti, W., Holch, H., Kattenbusch, M., Keren, F., Klein, H., Kuhlenkamp, D., Kuhne, V., Neuenhagen, H., Noosten, D., Ohland, E., Stiglocher, H., & Kugelmann, A. (2017). Plümecke – Preisermittlung für Bauarbeiten (28th ed.). Müller.","din1505-2-1":"Ernesti, Werner ; Holch, Heinrich ; Kattenbusch, Markus ; Keren, Franz ; Klein, Hilmar ; Kuhlenkamp, Dieter ; Kuhne, Volker ; Neuenhagen, Helmhard ; u. a.: Plümecke – Preisermittlung für Bauarbeiten. 28. Aufl. Köln : Müller, 2017","ama":"Ernesti W, Holch H, Kattenbusch M, et al. Plümecke – Preisermittlung für Bauarbeiten. 28th ed. Müller; 2017.","van":"Ernesti W, Holch H, Kattenbusch M, Keren F, Klein H, Kuhlenkamp D, et al. Plümecke – Preisermittlung für Bauarbeiten. 28th ed. Köln: Müller; 2017. 556 p.","havard":"W. Ernesti, H. Holch, M. Kattenbusch, F. Keren, H. Klein, D. Kuhlenkamp, V. Kuhne, H. Neuenhagen, D. Noosten, E. Ohland, H. Stiglocher, A. Kugelmann, Plümecke – Preisermittlung für Bauarbeiten, 28th ed., Müller, Köln, 2017.","ieee":"W. Ernesti et al., Plümecke – Preisermittlung für Bauarbeiten, 28th ed. Köln: Müller, 2017."},"page":"556","department":[{"_id":"DEP1054"}],"user_id":"83781","year":"2017","status":"public","date_updated":"2024-04-17T13:03:40Z","type":"book","publisher":"Müller"},{"type":"book","author":[{"first_name":"Andreas","full_name":"Vetter, Andreas","id":"27454","last_name":"Vetter"}],"publication_identifier":{"isbn":["3766722832"]},"place":"München","citation":{"ieee":"A. Vetter, Die besten Einfamilienhäuser aus Beton. München: Callwey, 2017.","ama":"Vetter A. Die besten Einfamilienhäuser aus Beton. München: Callwey; 2017.","van":"Vetter A. Die besten Einfamilienhäuser aus Beton. München: Callwey; 2017.","din1505-2-1":"Vetter, Andreas: Die besten Einfamilienhäuser aus Beton. München : Callwey, 2017","bjps":"Vetter A (2017) Die besten Einfamilienhäuser aus Beton. München: Callwey.","chicago":"Vetter, Andreas. Die besten Einfamilienhäuser aus Beton. München: Callwey, 2017.","havard":"A. Vetter, Die besten Einfamilienhäuser aus Beton, Callwey, München, 2017.","mla":"Vetter, Andreas. Die besten Einfamilienhäuser aus Beton. Callwey, 2017.","apa":"Vetter, A. (2017). Die besten Einfamilienhäuser aus Beton. München: Callwey.","short":"A. Vetter, Die besten Einfamilienhäuser aus Beton, Callwey, München, 2017.","chicago-de":"Vetter, Andreas. 2017. Die besten Einfamilienhäuser aus Beton. München: Callwey.","ufg":"Vetter, Andreas (2017): Die besten Einfamilienhäuser aus Beton, München."},"publisher":"Callwey","language":[{"iso":"ger"}],"date_created":"2020-06-03T07:59:59Z","publication_status":"published","date_updated":"2023-03-15T13:49:42Z","title":"Die besten Einfamilienhäuser aus Beton","year":2017,"user_id":"74004","department":[{"_id":"DEP1043"}],"status":"public","_id":"2773"},{"year":"2017","user_id":"83781","department":[{"_id":"DEP4022"}],"status":"public","publication":"Haut","_id":"2885","page":"324-329","type":"journal_article","author":[{"first_name":"Gerd","full_name":"Kutz, Gerd","last_name":"Kutz","id":"12015"}],"publication_identifier":{"issn":["0938-2216"]},"citation":{"ufg":"Kutz, Gerd: Zur Galenik topischer Lichtschutzmittel  Haut, in: Haut XXVVIII (2017), H. 6,  S. 324–329.","chicago":"Kutz, Gerd. “Zur Galenik topischer Lichtschutzmittel  Haut.” Haut XXVVIII, no. 6 (2017): 324–29.","chicago-de":"Kutz, Gerd. 2017. Zur Galenik topischer Lichtschutzmittel  Haut. Haut XXVVIII, Nr. 6: 324–329.","short":"G. Kutz, Haut XXVVIII (2017) 324–329.","bjps":"Kutz G (2017) Zur Galenik topischer Lichtschutzmittel  Haut. Haut XXVVIII, 324–329.","mla":"Kutz, Gerd. “Zur Galenik topischer Lichtschutzmittel  Haut.” Haut, vol. XXVVIII, no. 6, 2017, pp. 324–29.","apa":"Kutz, G. (2017). Zur Galenik topischer Lichtschutzmittel  Haut. Haut, XXVVIII(6), 324–329.","din1505-2-1":"Kutz, Gerd: Zur Galenik topischer Lichtschutzmittel  Haut. In: Haut Bd. XXVVIII, WPV, Wirtschafts- und Praxisverlag GmbH (2017), Nr. 6, S. 324–329","ama":"Kutz G. Zur Galenik topischer Lichtschutzmittel  Haut. Haut. 2017;XXVVIII(6):324-329.","van":"Kutz G. Zur Galenik topischer Lichtschutzmittel  Haut. Haut. 2017;XXVVIII(6):324–9.","havard":"G. Kutz, Zur Galenik topischer Lichtschutzmittel  Haut, Haut. XXVVIII (2017) 324–329.","ieee":"G. Kutz, “Zur Galenik topischer Lichtschutzmittel  Haut,” Haut, vol. XXVVIII, no. 6, pp. 324–329, 2017."},"language":[{"iso":"ger"}],"date_created":"2020-06-05T18:17:08Z","publisher":"WPV, Wirtschafts- und Praxisverlag GmbH ","publication_status":"published","volume":"XXVVIII","issue":"6","date_updated":"2024-10-31T13:36:52Z","title":"Zur Galenik topischer Lichtschutzmittel Haut"},{"author":[{"full_name":"Hernández Rodriguez, Tanja","last_name":"Hernández Rodriguez","id":"52466","first_name":"Tanja"},{"last_name":"Kern","full_name":"Kern, S.","first_name":"S."},{"first_name":"O.","full_name":"Platas Barradas, O.","last_name":"Platas Barradas"},{"last_name":"Pörtner","full_name":"Pörtner, R.","first_name":"R."},{"first_name":"Björn","last_name":"Frahm","id":"45666","full_name":"Frahm, Björn"}],"type":"conference_speech","citation":{"ieee":"T. Hernández Rodriguez, S. Kern, O. Platas Barradas, R. Pörtner, and B. Frahm, Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren. 2017.","van":"Hernández Rodriguez T, Kern S, Platas Barradas O, Pörtner R, Frahm B. Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren. 2017.","ama":"Hernández Rodriguez T, Kern S, Platas Barradas O, Pörtner R, Frahm B. Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren.; 2017.","bjps":"Hernández Rodriguez T et al. (2017) Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren. .","din1505-2-1":"Hernández Rodriguez, Tanja ; Kern, S. ; Platas Barradas, O. ; Pörtner, R. ; Frahm, Björn: Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren, 2017","chicago":"Hernández Rodriguez, Tanja, S. Kern, O. Platas Barradas, R. Pörtner, and Björn Frahm. Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren, 2017.","havard":"T. Hernández Rodriguez, S. Kern, O. Platas Barradas, R. Pörtner, B. Frahm, Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren, 2017.","short":"T. Hernández Rodriguez, S. Kern, O. Platas Barradas, R. Pörtner, B. Frahm, Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren, 2017.","apa":"Hernández Rodriguez, T., Kern, S., Platas Barradas, O., Pörtner, R., & Frahm, B. (2017). Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren. Presented at the 3. Lippischer Automatisierungstreff der Produktions- und Werkstofftechnik (LAT/PWT), Lemgo, Germany.","mla":"Hernández Rodriguez, Tanja, et al. Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren. 2017.","ufg":"Hernández Rodriguez, Tanja et. al. (2017): Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren.","chicago-de":"Hernández Rodriguez, Tanja, S. Kern, O. Platas Barradas, R. Pörtner und Björn Frahm. 2017. Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren."},"publication_status":"published","language":[{"iso":"ger"}],"date_created":"2020-06-16T14:18:13Z","date_updated":"2023-03-15T13:49:43Z","title":"Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren","year":2017,"user_id":"45666","department":[{"_id":"DEP4021"}],"status":"public","_id":"2920","conference":{"location":"Lemgo, Germany","start_date":"2017-05-19","name":"3. Lippischer Automatisierungstreff der Produktions- und Werkstofftechnik (LAT/PWT)"}},{"conference":{"name":"DECHEMA Himmelfahrtstagung “Models for Developing and Optimising Biotech Production","start_date":"2017-05-22","end_date":"2017-05-24","location":"Neu-Ulm, Germany"},"_id":"2921","status":"public","department":[{"_id":"DEP4021"}],"user_id":"45666","year":2017,"title":"Model-assisted design and optimization of biotechnological processes","date_updated":"2023-03-15T13:49:43Z","publication_status":"published","date_created":"2020-06-16T14:28:17Z","language":[{"iso":"eng"}],"citation":{"ieee":"R. Pörtner, J. Möller, T. Hernández Rodriguez, B. Frahm, and V. C. Hass, Model-assisted design and optimization of biotechnological processes. 2017.","havard":"R. Pörtner, J. Möller, T. Hernández Rodriguez, B. Frahm, V.C. Hass, Model-assisted design and optimization of biotechnological processes, 2017.","van":"Pörtner R, Möller J, Hernández Rodriguez T, Frahm B, Hass VC. Model-assisted design and optimization of biotechnological processes. 2017.","ama":"Pörtner R, Möller J, Hernández Rodriguez T, Frahm B, Hass VC. Model-Assisted Design and Optimization of Biotechnological Processes.; 2017.","din1505-2-1":"Pörtner, R. ; Möller, J. ; Hernández Rodriguez, Tanja ; Frahm, Björn ; Hass, V. C.: Model-assisted design and optimization of biotechnological processes, 2017","apa":"Pörtner, R., Möller, J., Hernández Rodriguez, T., Frahm, B., & Hass, V. C. (2017). Model-assisted design and optimization of biotechnological processes. Presented at the DECHEMA Himmelfahrtstagung “Models for Developing and Optimising Biotech Production, Neu-Ulm, Germany.","mla":"Pörtner, R., et al. Model-Assisted Design and Optimization of Biotechnological Processes. 2017.","short":"R. Pörtner, J. Möller, T. Hernández Rodriguez, B. Frahm, V.C. Hass, Model-Assisted Design and Optimization of Biotechnological Processes, 2017.","bjps":"Pörtner R et al. (2017) Model-Assisted Design and Optimization of Biotechnological Processes. .","chicago":"Pörtner, R., J. Möller, Tanja Hernández Rodriguez, Björn Frahm, and V. C. Hass. Model-Assisted Design and Optimization of Biotechnological Processes, 2017.","chicago-de":"Pörtner, R., J. Möller, Tanja Hernández Rodriguez, Björn Frahm und V. C. Hass. 2017. Model-assisted design and optimization of biotechnological processes.","ufg":"Pörtner, R. et. al. (2017): Model-assisted design and optimization of biotechnological processes."},"author":[{"first_name":"R.","full_name":"Pörtner, R.","last_name":"Pörtner"},{"first_name":"J.","full_name":"Möller, J.","last_name":"Möller"},{"first_name":"Tanja","full_name":"Hernández Rodriguez, Tanja","last_name":"Hernández Rodriguez","id":"52466"},{"full_name":"Frahm, Björn","id":"45666","last_name":"Frahm","first_name":"Björn"},{"last_name":"Hass","full_name":"Hass, V. C.","first_name":"V. C."}],"type":"conference_speech"},{"year":2017,"user_id":"45666","department":[{"_id":"DEP4021"}],"status":"public","_id":"2950","conference":{"name":"MATLAB EXPO, Track “Optimierungsaufgaben in der Praxis”","start_date":"2017-06-27","location":"Munic, Germany"},"type":"conference_speech","author":[{"id":"52466","last_name":"Hernández Rodriguez","full_name":"Hernández Rodriguez, Tanja","first_name":"Tanja"},{"last_name":"Koopmann","full_name":"Koopmann, K. S.","first_name":"K. S."},{"first_name":"J.","full_name":"Klaes, J.","last_name":"Klaes"},{"first_name":"S.","last_name":"Kern","full_name":"Kern, S."},{"last_name":"Platas Barradas","full_name":"Platas Barradas, O.","first_name":"O."},{"first_name":"R.","last_name":"Pörtner","full_name":"Pörtner, R."},{"first_name":"Björn","full_name":"Frahm, Björn","id":"45666","last_name":"Frahm"}],"citation":{"havard":"T. Hernández Rodriguez, K.S. Koopmann, J. Klaes, S. Kern, O. Platas Barradas, R. Pörtner, B. Frahm, Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren, 2017.","ieee":"T. Hernández Rodriguez et al., Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren. 2017.","ama":"Hernández Rodriguez T, Koopmann KS, Klaes J, et al. Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren.; 2017.","van":"Hernández Rodriguez T, Koopmann KS, Klaes J, Kern S, Platas Barradas O, Pörtner R, et al. Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren. 2017.","mla":"Hernández Rodriguez, Tanja, et al. Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren. 2017.","apa":"Hernández Rodriguez, T., Koopmann, K. S., Klaes, J., Kern, S., Platas Barradas, O., Pörtner, R., & Frahm, B. (2017). Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren. Presented at the MATLAB EXPO, Track “Optimierungsaufgaben in der Praxis,” Munic, Germany.","din1505-2-1":"Hernández Rodriguez, Tanja ; Koopmann, K. S. ; Klaes, J. ; Kern, S. ; Platas Barradas, O. ; Pörtner, R. ; Frahm, Björn: Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren, 2017","short":"T. Hernández Rodriguez, K.S. Koopmann, J. Klaes, S. Kern, O. Platas Barradas, R. Pörtner, B. Frahm, Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren, 2017.","bjps":"Hernández Rodriguez T et al. (2017) Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren. .","chicago":"Hernández Rodriguez, Tanja, K. S. Koopmann, J. Klaes, S. Kern, O. Platas Barradas, R. Pörtner, and Björn Frahm. Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren, 2017.","chicago-de":"Hernández Rodriguez, Tanja, K. S. Koopmann, J. Klaes, S. Kern, O. Platas Barradas, R. Pörtner und Björn Frahm. 2017. Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren.","ufg":"Hernández Rodriguez, Tanja et. al. (2017): Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren."},"language":[{"iso":"ger"}],"date_created":"2020-06-18T09:31:40Z","publication_status":"published","date_updated":"2023-03-15T13:49:44Z","title":"Produktion von Biopharmazeutika – Ein MATLAB©-Tool zur Simulation und Optimierung von Zellvermehrungsverfahren"},{"author":[{"id":"52466","last_name":"Hernández Rodriguez","full_name":"Hernández Rodriguez, Tanja","first_name":"Tanja"},{"first_name":"K. S.","last_name":"Koopmann","full_name":"Koopmann, K. S."},{"last_name":"Pörtner","full_name":"Pörtner, R.","first_name":"R."},{"id":"45666","last_name":"Frahm","full_name":"Frahm, Björn","first_name":"Björn"}],"type":"conference_poster","date_created":"2020-06-22T14:35:09Z","language":[{"iso":"eng"}],"publication_status":"published","citation":{"ama":"Hernández Rodriguez T, Koopmann KS, Pörtner R, Frahm B. Influence of Parameter Accuracies in Cell Culture Seed Train Simulations.; 2017.","van":"Hernández Rodriguez T, Koopmann KS, Pörtner R, Frahm B. Influence of parameter accuracies in cell culture seed train simulations. 2017.","havard":"T. Hernández Rodriguez, K.S. Koopmann, R. Pörtner, B. Frahm, Influence of parameter accuracies in cell culture seed train simulations, 2017.","ieee":"T. Hernández Rodriguez, K. S. Koopmann, R. Pörtner, and B. Frahm, Influence of parameter accuracies in cell culture seed train simulations. 2017.","chicago":"Hernández Rodriguez, Tanja, K. S. Koopmann, R. Pörtner, and Björn Frahm. Influence of Parameter Accuracies in Cell Culture Seed Train Simulations, 2017.","chicago-de":"Hernández Rodriguez, Tanja, K. S. Koopmann, R. Pörtner und Björn Frahm. 2017. Influence of parameter accuracies in cell culture seed train simulations.","ufg":"Hernández Rodriguez, Tanja et. al. (2017): Influence of parameter accuracies in cell culture seed train simulations.","mla":"Hernández Rodriguez, Tanja, et al. Influence of Parameter Accuracies in Cell Culture Seed Train Simulations. 2017.","apa":"Hernández Rodriguez, T., Koopmann, K. S., Pörtner, R., & Frahm, B. (2017). Influence of parameter accuracies in cell culture seed train simulations. Presented at the BioProcessingDays 2017, Recklinghausen, Germany.","din1505-2-1":"Hernández Rodriguez, Tanja ; Koopmann, K. S. ; Pörtner, R. ; Frahm, Björn: Influence of parameter accuracies in cell culture seed train simulations, 2017","short":"T. Hernández Rodriguez, K.S. Koopmann, R. Pörtner, B. Frahm, Influence of Parameter Accuracies in Cell Culture Seed Train Simulations, 2017.","bjps":"Hernández Rodriguez T et al. (2017) Influence of Parameter Accuracies in Cell Culture Seed Train Simulations. ."},"title":"Influence of parameter accuracies in cell culture seed train simulations","date_updated":"2023-03-15T13:49:44Z","department":[{"_id":"DEP4021"}],"user_id":"45666","year":2017,"status":"public","_id":"2994","conference":{"location":"Recklinghausen, Germany","start_date":"2017-02-20","end_date":"2017-02-22","name":"BioProcessingDays 2017"}},{"status":"public","year":2017,"user_id":"45666","department":[{"_id":"DEP4021"}],"conference":{"end_date":"2017-05-17","start_date":"2017-05-14","name":"25th Meeting of the European Society for Animal Cell Technology (ESACT): Cell technologies for innovative therapies","location":"Lausanne, Switzerland"},"_id":"2995","citation":{"ama":"Hernández Rodriguez T, Krull S, Hass VC, Möller J, Pörtner R, Frahm B. Model-Based Cell Culture Control – Unstructured, Unsegregated Models as a Key Element for Adaptive Seed Train and Fed-Batch Optimization.; 2017.","van":"Hernández Rodriguez T, Krull S, Hass VC, Möller J, Pörtner R, Frahm B. Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization. 2017.","havard":"T. Hernández Rodriguez, S. Krull, V.C. Hass, J. Möller, R. Pörtner, B. Frahm, Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization, 2017.","ieee":"T. Hernández Rodriguez, S. Krull, V. C. Hass, J. Möller, R. Pörtner, and B. Frahm, Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization. 2017.","ufg":"Hernández Rodriguez, Tanja et. al. (2017): Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization.","chicago":"Hernández Rodriguez, Tanja, S. Krull, V. C. Hass, J. Möller, R. Pörtner, and Björn Frahm. Model-Based Cell Culture Control – Unstructured, Unsegregated Models as a Key Element for Adaptive Seed Train and Fed-Batch Optimization, 2017.","chicago-de":"Hernández Rodriguez, Tanja, S. Krull, V. C. Hass, J. Möller, R. Pörtner und Björn Frahm. 2017. Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization.","short":"T. Hernández Rodriguez, S. Krull, V.C. Hass, J. Möller, R. Pörtner, B. Frahm, Model-Based Cell Culture Control – Unstructured, Unsegregated Models as a Key Element for Adaptive Seed Train and Fed-Batch Optimization, 2017.","bjps":"Hernández Rodriguez T et al. (2017) Model-Based Cell Culture Control – Unstructured, Unsegregated Models as a Key Element for Adaptive Seed Train and Fed-Batch Optimization. .","apa":"Hernández Rodriguez, T., Krull, S., Hass, V. C., Möller, J., Pörtner, R., & Frahm, B. (2017). Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization. Presented at the 25th Meeting of the European Society for Animal Cell Technology (ESACT): Cell technologies for innovative therapies, Lausanne, Switzerland.","mla":"Hernández Rodriguez, Tanja, et al. Model-Based Cell Culture Control – Unstructured, Unsegregated Models as a Key Element for Adaptive Seed Train and Fed-Batch Optimization. 2017.","din1505-2-1":"Hernández Rodriguez, Tanja ; Krull, S. ; Hass, V. C. ; Möller, J. ; Pörtner, R. ; Frahm, Björn: Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization, 2017"},"publication_status":"published","date_created":"2020-06-23T12:23:00Z","language":[{"iso":"eng"}],"type":"conference_poster","author":[{"first_name":"Tanja","full_name":"Hernández Rodriguez, Tanja","id":"52466","last_name":"Hernández Rodriguez"},{"first_name":"S.","full_name":"Krull, S.","last_name":"Krull"},{"first_name":"V. C.","full_name":"Hass, V. C.","last_name":"Hass"},{"first_name":"J.","last_name":"Möller","full_name":"Möller, J."},{"first_name":"R.","last_name":"Pörtner","full_name":"Pörtner, R."},{"last_name":"Frahm","id":"45666","full_name":"Frahm, Björn","first_name":"Björn"}],"date_updated":"2023-03-15T13:49:44Z","title":"Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization"},{"_id":"2996","conference":{"start_date":"2017-05-22","end_date":"2017-05-24","name":"DECHEMA Himmelfahrtstagung “Models for Developing and Optimising Biotech Production”","location":"Neu-Ulm, Germany"},"year":2017,"user_id":"45666","department":[{"_id":"DEP4021"}],"status":"public","date_updated":"2023-03-15T13:49:44Z","title":"Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization","author":[{"first_name":"Tanja","full_name":"Hernández Rodriguez, Tanja","last_name":"Hernández Rodriguez","id":"52466"},{"last_name":"Krull","full_name":"Krull, S.","first_name":"S."},{"first_name":"V. C.","last_name":"Hass","full_name":"Hass, V. C."},{"last_name":"Pörtner","full_name":"Pörtner, R.","first_name":"R."},{"first_name":"Björn","full_name":"Frahm, Björn","last_name":"Frahm","id":"45666"}],"type":"conference_poster","citation":{"apa":"Hernández Rodriguez, T., Krull, S., Hass, V. C., Pörtner, R., & Frahm, B. (2017). Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization. Presented at the DECHEMA Himmelfahrtstagung “Models for Developing and Optimising Biotech Production,” Neu-Ulm, Germany.","mla":"Hernández Rodriguez, Tanja, et al. Model-Based Cell Culture Control – Unstructured, Unsegregated Models as a Key Element for Adaptive Seed Train and Fed-Batch Optimization. 2017.","short":"T. Hernández Rodriguez, S. Krull, V.C. Hass, R. Pörtner, B. Frahm, Model-Based Cell Culture Control – Unstructured, Unsegregated Models as a Key Element for Adaptive Seed Train and Fed-Batch Optimization, 2017.","chicago-de":"Hernández Rodriguez, Tanja, S. Krull, V. C. Hass, R. Pörtner und Björn Frahm. 2017. Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization.","ufg":"Hernández Rodriguez, Tanja et. al. (2017): Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization.","havard":"T. Hernández Rodriguez, S. Krull, V.C. Hass, R. Pörtner, B. Frahm, Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization, 2017.","din1505-2-1":"Hernández Rodriguez, Tanja ; Krull, S. ; Hass, V. C. ; Pörtner, R. ; Frahm, Björn: Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization, 2017","bjps":"Hernández Rodriguez T et al. (2017) Model-Based Cell Culture Control – Unstructured, Unsegregated Models as a Key Element for Adaptive Seed Train and Fed-Batch Optimization. .","chicago":"Hernández Rodriguez, Tanja, S. Krull, V. C. Hass, R. Pörtner, and Björn Frahm. Model-Based Cell Culture Control – Unstructured, Unsegregated Models as a Key Element for Adaptive Seed Train and Fed-Batch Optimization, 2017.","ieee":"T. Hernández Rodriguez, S. Krull, V. C. Hass, R. Pörtner, and B. Frahm, Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization. 2017.","van":"Hernández Rodriguez T, Krull S, Hass VC, Pörtner R, Frahm B. Model-based cell culture control – unstructured, unsegregated models as a key element for adaptive seed train and fed-batch optimization. 2017.","ama":"Hernández Rodriguez T, Krull S, Hass VC, Pörtner R, Frahm B. Model-Based Cell Culture Control – Unstructured, Unsegregated Models as a Key Element for Adaptive Seed Train and Fed-Batch Optimization.; 2017."},"publication_status":"published","language":[{"iso":"eng"}],"date_created":"2020-06-23T12:26:07Z"},{"year":2017,"user_id":"74004","edition":"9","department":[{"_id":"DEP3021"}],"status":"public","_id":"3033","author":[{"last_name":"Austermann-Haun","id":"40803","full_name":"Austermann-Haun, Ute","first_name":"Ute"},{"first_name":"H.","full_name":"Felber, H.","last_name":"Felber"}],"type":"book","publication_identifier":{"isbn":["978-3-88721-522-4"]},"citation":{"bjps":"Austermann-Haun U and Felber H (2017) Abwasser Grundkurse, 9th ed. Hirthammer.","short":"U. Austermann-Haun, H. Felber, Abwasser Grundkurse, 9th ed., Hirthammer, 2017.","mla":"Austermann-Haun, Ute, and H. Felber. Abwasser Grundkurse. 9th ed., Hirthammer, 2017.","apa":"Austermann-Haun, U., & Felber, H. (2017). Abwasser Grundkurse (9th ed.). Hirthammer.","din1505-2-1":"Austermann-Haun, Ute ; Felber, H.: Abwasser Grundkurse. 9. Aufl. : Hirthammer, 2017","ufg":"Austermann-Haun, Ute/Felber, H. (2017): Abwasser Grundkurse, 9.","chicago":"Austermann-Haun, Ute, and H. Felber. Abwasser Grundkurse. 9th ed. Hirthammer, 2017.","chicago-de":"Austermann-Haun, Ute und H. Felber. 2017. Abwasser Grundkurse. 9. Aufl. Hirthammer.","havard":"U. Austermann-Haun, H. Felber, Abwasser Grundkurse, 9th ed., Hirthammer, 2017.","ieee":"U. Austermann-Haun and H. Felber, Abwasser Grundkurse, 9th ed. Hirthammer, 2017.","ama":"Austermann-Haun U, Felber H. Abwasser Grundkurse. 9th ed. Hirthammer; 2017.","van":"Austermann-Haun U, Felber H. Abwasser Grundkurse. 9th ed. Hirthammer; 2017."},"date_created":"2020-07-20T12:05:08Z","language":[{"iso":"ger"}],"publisher":"Hirthammer","publication_status":"published","date_updated":"2023-03-15T13:49:44Z","title":"Abwasser Grundkurse"},{"author":[{"first_name":"J. F.","full_name":"Meier, J. F.","last_name":"Meier"},{"first_name":"Ute","full_name":"Austermann-Haun, Ute","id":"40803","last_name":"Austermann-Haun"},{"first_name":"Joachim","id":"21018","last_name":"Fettig","full_name":"Fettig, Joachim"},{"last_name":"Liebe","full_name":"Liebe, H.","first_name":"H."},{"last_name":"Wichern","full_name":"Wichern, M.","first_name":"M."}],"type":"journal_article","intvolume":" 76","date_created":"2020-07-21T08:03:18Z","language":[{"iso":"eng"}],"publication_status":"published","volume":76,"citation":{"mla":"Meier, J. F., et al. “Operation of Anaerobic Filter Compared with an Anaerobic Moving Bed Bioreactor for the Treatment of Waste Water from Hydrothermal Carbonization of Fine Mulch.” Water Science & Technology, vol. 76, no. 8, 2017, pp. 2065–74.","apa":"Meier, J. F., Austermann-Haun, U., Fettig, J., Liebe, H., & Wichern, M. (2017). Operation of anaerobic filter compared with an anaerobic moving bed bioreactor for the treatment of waste water from hydrothermal carbonization of fine mulch. Water Science & Technology, 76(8), 2065–2074.","din1505-2-1":"Meier, J. F. ; Austermann-Haun, Ute ; Fettig, Joachim ; Liebe, H. ; Wichern, M.: Operation of anaerobic filter compared with an anaerobic moving bed bioreactor for the treatment of waste water from hydrothermal carbonization of fine mulch. In: Water Science & Technology Bd. 76 (2017), Nr. 8, S. 2065–2074","short":"J.F. Meier, U. Austermann-Haun, J. Fettig, H. Liebe, M. Wichern, Water Science & Technology 76 (2017) 2065–2074.","bjps":"Meier JF et al. (2017) Operation of Anaerobic Filter Compared with an Anaerobic Moving Bed Bioreactor for the Treatment of Waste Water from Hydrothermal Carbonization of Fine Mulch. Water Science & Technology 76, 2065–2074.","chicago-de":"Meier, J. F., Ute Austermann-Haun, Joachim Fettig, H. Liebe und M. Wichern. 2017. Operation of anaerobic filter compared with an anaerobic moving bed bioreactor for the treatment of waste water from hydrothermal carbonization of fine mulch. Water Science & Technology 76, Nr. 8: 2065–2074.","chicago":"Meier, J. F., Ute Austermann-Haun, Joachim Fettig, H. Liebe, and M. Wichern. “Operation of Anaerobic Filter Compared with an Anaerobic Moving Bed Bioreactor for the Treatment of Waste Water from Hydrothermal Carbonization of Fine Mulch.” Water Science & Technology 76, no. 8 (2017): 2065–74.","ufg":"Meier, J. F. et. al. (2017): Operation of anaerobic filter compared with an anaerobic moving bed bioreactor for the treatment of waste water from hydrothermal carbonization of fine mulch, in: Water Science & Technology 76 (8), S. 2065–2074.","havard":"J.F. Meier, U. Austermann-Haun, J. Fettig, H. Liebe, M. Wichern, Operation of anaerobic filter compared with an anaerobic moving bed bioreactor for the treatment of waste water from hydrothermal carbonization of fine mulch, Water Science & Technology. 76 (2017) 2065–2074.","ieee":"J. F. Meier, U. Austermann-Haun, J. Fettig, H. Liebe, and M. Wichern, “Operation of anaerobic filter compared with an anaerobic moving bed bioreactor for the treatment of waste water from hydrothermal carbonization of fine mulch,” Water Science & Technology, vol. 76, no. 8, pp. 2065–2074, 2017.","ama":"Meier JF, Austermann-Haun U, Fettig J, Liebe H, Wichern M. Operation of anaerobic filter compared with an anaerobic moving bed bioreactor for the treatment of waste water from hydrothermal carbonization of fine mulch. Water Science & Technology. 2017;76(8):2065-2074.","van":"Meier JF, Austermann-Haun U, Fettig J, Liebe H, Wichern M. Operation of anaerobic filter compared with an anaerobic moving bed bioreactor for the treatment of waste water from hydrothermal carbonization of fine mulch. Water Science & Technology. 2017;76(8):2065–74."},"issue":"8","title":"Operation of anaerobic filter compared with an anaerobic moving bed bioreactor for the treatment of waste water from hydrothermal carbonization of fine mulch","date_updated":"2023-03-15T13:49:44Z","department":[{"_id":"DEP3021"},{"_id":"DEP8020"}],"year":2017,"user_id":"74004","publication":"Water Science & Technology","status":"public","_id":"3057","page":"2065 - 2074"},{"has_accepted_license":"1","title":"Production Engineering and Management","citation":{"ufg":"Padoano, Elio et. al. (Hgg.) (2017): Production Engineering and Management (=Schriftenreihe Logistik), Lemgo.","chicago-de":"Padoano, Elio, Franz-Josef Villmer und Department of Production Engineering and Management, Hrsg. 2017. Production Engineering and Management. Schriftenreihe Logistik. Lemgo.","short":"E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2017.","mla":"Padoano, Elio, et al., editors. Production Engineering and Management. no. ., 2017, p. 248.","apa":"Padoano, E., Villmer, F.-J., & Department of Production Engineering and Management (Eds.). (2017). Production Engineering and Management (p. 248). Presented at the 7th International Conference, Lemgo.","havard":"E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2017.","chicago":"Padoano, Elio, Franz-Josef Villmer, and Department of Production Engineering and Management, eds. Production Engineering and Management. Schriftenreihe Logistik. Lemgo, 2017.","bjps":"Padoano E, Villmer F-J and Department of Production Engineering and Management (eds) (2017) Production Engineering and Management. Lemgo.","din1505-2-1":"Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, Schriftenreihe Logistik. Lemgo, 2017","ama":"Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2017:248.","van":"Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. (Schriftenreihe Logistik).","ieee":"E. Padoano, F.-J. Villmer, and Department of Production Engineering and Management, Eds., Production Engineering and Management, no. . Lemgo, 2017, p. 248."},"place":"Lemgo","publication_status":"published","language":[{"iso":"eng"}],"date_created":"2018-12-04T16:24:04Z","ddc":["650"],"publication_identifier":{"isbn":["978-3-946856-01-6"]},"_id":"309","oa":"1","series_title":"Schriftenreihe Logistik","date_updated":"2023-03-15T13:49:44Z","file_date_updated":"2018-12-04T16:21:07Z","issue":".","editor":[{"first_name":"Elio","last_name":"Padoano","full_name":"Padoano, Elio"},{"first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","last_name":"Villmer","id":"14290"}],"type":"conference_editor","abstract":[{"lang":"eng","text":"It is our pleasure to introduce the seventh edition of the International Conference on Production Engineering and Management (PEM), an event that is the result of the joint effort of the University of Trieste and the Ostwestfalen-\r\nLippe University of Applied Sciences. The conference has been established as an annual meeting under the Double Degree Master Program “Production Engineering and Management” by the two partner universities. This year the conference is hosted at the university campus in Pordenone. The main goal of the conference is to offer students, researchers and professionals in Germany, Italy and abroad, an opportunity to meet and exchange information, discuss experience, specific practices and technical solutions for planning, design and management of manufacturing and service systems and processes. As always, the conference is a platform aimed at presenting research projects, introducing young academics to the tradition of symposiums and promoting the exchange of ideas between the industry and the academy. This year’s special focus is on industry sustainability, which is currently a major topic of discussion among experts and professionals. Sustainability can be considered as a requirement for any modern production processes and systems, and also has to be embedded in the context of Industry 4.0. In fact, the features and problems of industry 4.0 have been widely discussed in the last editions of the PEM conference, in which efficiency and waste reduction emerged as key factors. The study and development of the connections between future industry and sustainability is therefore critical, as highlighted in the recent “German Sustainable Development Strategy and the 2030 Agenda”. Accordingly, the seventh edition of the PEM conference aims to offer a contribution to the debate. The conference program includes 25 speeches organized in six sessions. Three are specifically dedicated to “Direct Digital Manufacturing in the context of Industry 4.0” and “Technology and Business for Circular Economy and Sustainable Production”. The other sessions are covering areas of great interest and importance to the participants of the conference, which are related to the main focus: “Innovative Management Techniques and Methodologies”, “Industrial Engineering and Lean Management” and “Wood Processing Technologies and Furniture Production”. The proceedings of the conference include the articles submitted and accepted after a careful double-blind refereeing process."}],"page":"248","conference":{"start_date":"2017-09-28","end_date":"2017-09-29","name":"7th International Conference","location":"Pardenone, Italy"},"file":[{"relation":"main_file","success":1,"content_type":"application/pdf","file_name":"PEM_2017_Proceeding_web.pdf","creator":"hka-zn8","access_level":"open_access","date_updated":"2018-12-04T16:21:07Z","date_created":"2018-12-04T16:21:07Z","file_size":7437227,"file_id":"310"}],"status":"public","year":2017,"user_id":"68554","corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"department":[{"_id":"DEP1306"}]},{"department":[{"_id":"DEP3021"}],"year":2017,"user_id":"74004","status":"public","_id":"3181","conference":{"end_date":"2017-09-17","start_date":"2017-09-17","name":"DWA-Landesverbandstagung Nord","location":"Ilsede Peine"},"type":"conference","author":[{"first_name":"Ute","full_name":"Austermann-Haun, Ute","id":"40803","last_name":"Austermann-Haun"}],"language":[{"iso":"ger"}],"date_created":"2020-08-04T09:00:27Z","citation":{"havard":"U. Austermann-Haun, Spurenstoffelimination mit Ozon und Aktivkohle, in: 2017.","short":"U. Austermann-Haun, in: 2017.","mla":"Austermann-Haun, Ute. Spurenstoffelimination mit Ozon und Aktivkohle. 2017.","apa":"Austermann-Haun, U. (2017). Spurenstoffelimination mit Ozon und Aktivkohle. Presented at the DWA-Landesverbandstagung Nord, Ilsede Peine.","ufg":"Austermann-Haun, Ute (2017): Spurenstoffelimination mit Ozon und Aktivkohle, in: .","chicago-de":"Austermann-Haun, Ute. 2017. Spurenstoffelimination mit Ozon und Aktivkohle. In: .","ieee":"U. Austermann-Haun, “Spurenstoffelimination mit Ozon und Aktivkohle,” presented at the DWA-Landesverbandstagung Nord, Ilsede Peine, 2017.","van":"Austermann-Haun U. Spurenstoffelimination mit Ozon und Aktivkohle. In 2017.","ama":"Austermann-Haun U. Spurenstoffelimination mit Ozon und Aktivkohle. In: ; 2017.","bjps":"Austermann-Haun U (2017) Spurenstoffelimination mit Ozon und Aktivkohle.","din1505-2-1":"Austermann-Haun, Ute: Spurenstoffelimination mit Ozon und Aktivkohle. In: , 2017","chicago":"Austermann-Haun, Ute. “Spurenstoffelimination mit Ozon und Aktivkohle,” 2017."},"title":"Spurenstoffelimination mit Ozon und Aktivkohle","date_updated":"2023-03-15T13:49:45Z"},{"status":"public","year":2017,"user_id":"74004","department":[{"_id":"DEP3021"}],"conference":{"location":"Mellendorf","end_date":"2017-06-14","start_date":"2017-06-13","name":"Klärwärter-Aufbaukurs"},"_id":"3182","citation":{"havard":"U. Austermann-Haun, Grundlagen der biologischen Abwasserreinigung und Stickstoffelimination in Kläranlagen, in: 2017.","short":"U. Austermann-Haun, in: 2017.","apa":"Austermann-Haun, U. (2017). Grundlagen der biologischen Abwasserreinigung und Stickstoffelimination in Kläranlagen. Presented at the Klärwärter-Aufbaukurs, Mellendorf.","mla":"Austermann-Haun, Ute. Grundlagen der biologischen Abwasserreinigung und Stickstoffelimination in Kläranlagen. 2017.","ufg":"Austermann-Haun, Ute (2017): Grundlagen der biologischen Abwasserreinigung und Stickstoffelimination in Kläranlagen, in: .","chicago-de":"Austermann-Haun, Ute. 2017. Grundlagen der biologischen Abwasserreinigung und Stickstoffelimination in Kläranlagen. In: .","ieee":"U. Austermann-Haun, “Grundlagen der biologischen Abwasserreinigung und Stickstoffelimination in Kläranlagen,” presented at the Klärwärter-Aufbaukurs, Mellendorf, 2017.","van":"Austermann-Haun U. Grundlagen der biologischen Abwasserreinigung und Stickstoffelimination in Kläranlagen. In 2017.","ama":"Austermann-Haun U. Grundlagen der biologischen Abwasserreinigung und Stickstoffelimination in Kläranlagen. In: ; 2017.","bjps":"Austermann-Haun U (2017) Grundlagen der biologischen Abwasserreinigung und Stickstoffelimination in Kläranlagen.","din1505-2-1":"Austermann-Haun, Ute: Grundlagen der biologischen Abwasserreinigung und Stickstoffelimination in Kläranlagen. In: , 2017","chicago":"Austermann-Haun, Ute. “Grundlagen der biologischen Abwasserreinigung und Stickstoffelimination in Kläranlagen,” 2017."},"date_created":"2020-08-04T09:00:27Z","language":[{"iso":"ger"}],"type":"conference","author":[{"first_name":"Ute","full_name":"Austermann-Haun, Ute","last_name":"Austermann-Haun","id":"40803"}],"date_updated":"2023-03-15T13:49:45Z","title":"Grundlagen der biologischen Abwasserreinigung und Stickstoffelimination in Kläranlagen"},{"citation":{"chicago":"Austermann-Haun, Ute. “Anpassung der Kläranlagen an demographischen Wandel,” 2017.","bjps":"Austermann-Haun U (2017) Anpassung der Kläranlagen an demographischen Wandel.","din1505-2-1":"Austermann-Haun, Ute: Anpassung der Kläranlagen an demographischen Wandel. In: , 2017","ama":"Austermann-Haun U. Anpassung der Kläranlagen an demographischen Wandel. In: ; 2017.","van":"Austermann-Haun U. Anpassung der Kläranlagen an demographischen Wandel. In 2017.","ieee":"U. Austermann-Haun, “Anpassung der Kläranlagen an demographischen Wandel,” presented at the IKT-Seminar „Mehr Regen, weniger Menschen: Wie Stadtentwässerungen vorausschauen, vorbeugen und vorsorgen müssen!“, Gelsenkirchen, 2017.","ufg":"Austermann-Haun, Ute (2017): Anpassung der Kläranlagen an demographischen Wandel, in: .","chicago-de":"Austermann-Haun, Ute. 2017. Anpassung der Kläranlagen an demographischen Wandel. In: .","short":"U. Austermann-Haun, in: 2017.","apa":"Austermann-Haun, U. (2017). Anpassung der Kläranlagen an demographischen Wandel. Presented at the IKT-Seminar „Mehr Regen, weniger Menschen: Wie Stadtentwässerungen vorausschauen, vorbeugen und vorsorgen müssen!“, Gelsenkirchen.","mla":"Austermann-Haun, Ute. Anpassung der Kläranlagen an demographischen Wandel. 2017.","havard":"U. Austermann-Haun, Anpassung der Kläranlagen an demographischen Wandel, in: 2017."},"language":[{"iso":"ger"}],"date_created":"2020-08-04T09:00:27Z","author":[{"first_name":"Ute","id":"40803","last_name":"Austermann-Haun","full_name":"Austermann-Haun, Ute"}],"type":"conference","date_updated":"2023-03-15T13:49:45Z","title":"Anpassung der Kläranlagen an demographischen Wandel","status":"public","user_id":"74004","year":2017,"department":[{"_id":"DEP3021"}],"conference":{"end_date":"2017-02-21","start_date":"2017-02-21","name":"IKT-Seminar „Mehr Regen, weniger Menschen: Wie Stadtentwässerungen vorausschauen, vorbeugen und vorsorgen müssen!“","location":"Gelsenkirchen"},"_id":"3184"},{"_id":"328","publication":"2017 IEEE Second International Conference on DC Microgrids (ICDCM)","main_file_link":[{"url":"https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8001049"}],"title":"Concepts for a DC Network in Industrial Production","author":[{"first_name":"Holger","full_name":"Borcherding, Holger","id":"1693","last_name":"Borcherding"},{"first_name":"Johann","last_name":"Austermann","id":"42114","full_name":"Austermann, Johann"},{"first_name":"Timm","last_name":"Kuhlmann","full_name":"Kuhlmann, Timm"},{"full_name":"Weis, Benno","last_name":"Weis","first_name":"Benno"},{"first_name":"Andre","last_name":"Leonide","full_name":"Leonide, Andre"}],"place":"Danvers","citation":{"bjps":"Borcherding H et al. (2017) Concepts for a DC Network in Industrial Production. In Institute of Electrical and Electronics Engineers (IEEE) (ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers, pp. 227–234.","din1505-2-1":"Borcherding, Holger ; Austermann, Johann ; Kuhlmann, Timm ; Weis, Benno ; Leonide, Andre: Concepts for a DC Network in Industrial Production. In: Institute of Electrical and Electronics Engineers (IEEE) (Hrsg.): 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers, 2017, S. 227–234","chicago":"Borcherding, Holger, Johann Austermann, Timm Kuhlmann, Benno Weis, and Andre Leonide. “Concepts for a DC Network in Industrial Production.” In 2017 IEEE Second International Conference on DC Microgrids (ICDCM), edited by Institute of Electrical and Electronics Engineers (IEEE), 227–34. Danvers, 2017. https://doi.org/10.1109/ICDCM.2017.8001049.","ieee":"H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, and A. Leonide, “Concepts for a DC Network in Industrial Production,” in 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Nürnberg, 2017, no. 1, pp. 227–234.","ama":"Borcherding H, Austermann J, Kuhlmann T, Weis B, Leonide A. Concepts for a DC Network in Industrial Production. In: Institute of Electrical and Electronics Engineers (IEEE), ed. 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers; 2017:227-234. doi:10.1109/ICDCM.2017.8001049","van":"Borcherding H, Austermann J, Kuhlmann T, Weis B, Leonide A. Concepts for a DC Network in Industrial Production. In: Institute of Electrical and Electronics Engineers (IEEE), editor. 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers; 2017. p. 227–34.","short":"H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, A. Leonide, in: Institute of Electrical and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Danvers, 2017, pp. 227–234.","mla":"Borcherding, Holger, et al. “Concepts for a DC Network in Industrial Production.” 2017 IEEE Second International Conference on DC Microgrids (ICDCM), edited by Institute of Electrical and Electronics Engineers (IEEE), no. 1, 2017, pp. 227–34, doi:10.1109/ICDCM.2017.8001049.","apa":"Borcherding, H., Austermann, J., Kuhlmann, T., Weis, B., & Leonide, A. (2017). Concepts for a DC Network in Industrial Production. In Institute of Electrical and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM) (pp. 227–234). Danvers. https://doi.org/10.1109/ICDCM.2017.8001049","ufg":"Borcherding, Holger et. al. (2017): Concepts for a DC Network in Industrial Production, in: Institute of Electrical and Electronics Engineers (IEEE) (Hg.): 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Danvers, S. 227–234.","chicago-de":"Borcherding, Holger, Johann Austermann, Timm Kuhlmann, Benno Weis und Andre Leonide. 2017. Concepts for a DC Network in Industrial Production. In: 2017 IEEE Second International Conference on DC Microgrids (ICDCM), hg. von Institute of Electrical and Electronics Engineers (IEEE), 227–234. Danvers. doi:10.1109/ICDCM.2017.8001049, .","havard":"H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, A. Leonide, Concepts for a DC Network in Industrial Production, in: Institute of Electrical and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Danvers, 2017: pp. 227–234."},"date_created":"2018-12-10T15:11:18Z","language":[{"iso":"eng"}],"keyword":["AC-DC power convertors","electromagnetic compatibility","energy conservation","energy management systems","rectifiers","main power supply","industrial production","DC network","AC-DC conversion","rectifier topologies","EMC properties","intelligent energy management","energy efficiency improvement","downtime reduction","Rectifiers","Switches","Voltage control","Topology","Network topology","Production","Grounding","industrial DC grid","SMART Grid"],"abstract":[{"text":"In this paper, concepts for an extended DC network for the main power supply of components from various manufacturers in industrial production are presented. In the first part, detailed requirements for such a network are given from the viewpoint of a customer. Based on those, different concepts for AC/DC conversion and energy management are discussed. As far as AC/DC conversion is concerned, the advantages and drawbacks of several rectifier topologies are listed, as they have a significant impact on the system behavior and EMC properties. \r\nAn intelligent energy management can improve the energy efficiency and reduce downtimes of a plant, which are major requirements from a customer’s viewpoint. ","lang":"eng"}],"conference":{"start_date":"2017-06-27","end_date":"2017-06-29","name":"IEEE Second International Conference on DC Microgrids (ICDCM) ","location":"Nürnberg"},"page":"227-234","user_id":"45673","year":2017,"department":[{"_id":"DEP5018"}],"corporate_editor":["Institute of Electrical and Electronics Engineers (IEEE)"],"status":"public","related_material":{"link":[{"url":"https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8001049","relation":"contains"}]},"issue":"1","date_updated":"2023-03-15T13:49:46Z","doi":"10.1109/ICDCM.2017.8001049","type":"conference"},{"title":"Überwachung von Schmelz- und Feuchtgranulationsprozessen in Intensivmischern mit Hilfe der Parsum-Sonde","date_updated":"2024-10-31T13:56:11Z","publication_status":"published","language":[{"iso":"ger"}],"date_created":"2020-08-12T09:08:44Z","citation":{"havard":"G. Kutz, Überwachung von Schmelz- und Feuchtgranulationsprozessen in Intensivmischern mit Hilfe der Parsum-Sonde, in: 2017.","ieee":"G. Kutz, “Überwachung von Schmelz- und Feuchtgranulationsprozessen in Intensivmischern mit Hilfe der Parsum-Sonde,” presented at the 20 Jahre Parsum auf der POWTECH 2017, Nürnberg, 2017.","ama":"Kutz G. Überwachung von Schmelz- und Feuchtgranulationsprozessen in Intensivmischern mit Hilfe der Parsum-Sonde. In: ; 2017.","van":"Kutz G. Überwachung von Schmelz- und Feuchtgranulationsprozessen in Intensivmischern mit Hilfe der Parsum-Sonde. In 2017.","short":"G. Kutz, in: 2017.","bjps":"Kutz G (2017) Überwachung von Schmelz- und Feuchtgranulationsprozessen in Intensivmischern mit Hilfe der Parsum-Sonde.","mla":"Kutz, Gerd. Überwachung von Schmelz- und Feuchtgranulationsprozessen in Intensivmischern mit Hilfe der Parsum-Sonde. 2017.","apa":"Kutz, G. (2017). Überwachung von Schmelz- und Feuchtgranulationsprozessen in Intensivmischern mit Hilfe der Parsum-Sonde. 20 Jahre Parsum auf der POWTECH 2017, Nürnberg.","din1505-2-1":"Kutz, Gerd: Überwachung von Schmelz- und Feuchtgranulationsprozessen in Intensivmischern mit Hilfe der Parsum-Sonde. In: , 2017","ufg":"Kutz, Gerd: Überwachung von Schmelz- und Feuchtgranulationsprozessen in Intensivmischern mit Hilfe der Parsum-Sonde, in: o. Hg.: o. O. 2017.","chicago-de":"Kutz, Gerd. 2017. Überwachung von Schmelz- und Feuchtgranulationsprozessen in Intensivmischern mit Hilfe der Parsum-Sonde. In: .","chicago":"Kutz, Gerd. “Überwachung von Schmelz- und Feuchtgranulationsprozessen in Intensivmischern mit Hilfe der Parsum-Sonde,” 2017."},"author":[{"first_name":"Gerd","last_name":"Kutz","id":"12015","full_name":"Kutz, Gerd"}],"type":"conference","conference":{"name":"20 Jahre Parsum auf der POWTECH 2017","end_date":"2017-11-26","start_date":"2017-11-26","location":"Nürnberg"},"_id":"3326","status":"public","department":[{"_id":"DEP4022"}],"user_id":"83781","year":"2017"},{"year":"2017","user_id":"83781","department":[{"_id":"DEP4022"}],"status":"public","publication":"Teil 11: Symposium der GD Task Force „Licht.Hautkrebs.Prävention“: Prävention von hellem Hautkrebs im privaten und im beruflichen Bereich","_id":"3329","conference":{"location":"München","name":"21. Jahrestagung der GD","end_date":"2017-03-22","start_date":"2017-03-20"},"author":[{"id":"12015","last_name":"Kutz","full_name":"Kutz, Gerd","first_name":"Gerd"}],"type":"conference","citation":{"chicago":"Kutz, Gerd. “Galenik von aktuellen topischen Lichtschutzmitteln.” In Teil 11: Symposium der GD Task Force „Licht.Hautkrebs.Prävention“: Prävention von hellem Hautkrebs im privaten und im beruflichen Bereich, 2017.","chicago-de":"Kutz, Gerd. 2017. Galenik von aktuellen topischen Lichtschutzmitteln. In: Teil 11: Symposium der GD Task Force „Licht.Hautkrebs.Prävention“: Prävention von hellem Hautkrebs im privaten und im beruflichen Bereich.","ufg":"Kutz, Gerd: Galenik von aktuellen topischen Lichtschutzmitteln, in: o. Hg.: Teil 11: Symposium der GD Task Force „Licht.Hautkrebs.Prävention“: Prävention von hellem Hautkrebs im privaten und im beruflichen Bereich, o. O. 2017.","din1505-2-1":"Kutz, Gerd: Galenik von aktuellen topischen Lichtschutzmitteln. In: Teil 11: Symposium der GD Task Force „Licht.Hautkrebs.Prävention“: Prävention von hellem Hautkrebs im privaten und im beruflichen Bereich, 2017","apa":"Kutz, G. (2017). Galenik von aktuellen topischen Lichtschutzmitteln. Teil 11: Symposium der GD Task Force „Licht.Hautkrebs.Prävention“: Prävention von hellem Hautkrebs im privaten und im beruflichen Bereich. 21. Jahrestagung der GD, München.","mla":"Kutz, Gerd. “Galenik von aktuellen topischen Lichtschutzmitteln.” Teil 11: Symposium der GD Task Force „Licht.Hautkrebs.Prävention“: Prävention von hellem Hautkrebs im privaten und im beruflichen Bereich, 2017.","bjps":"Kutz G (2017) Galenik von aktuellen topischen Lichtschutzmitteln. Teil 11: Symposium der GD Task Force „Licht.Hautkrebs.Prävention“: Prävention von hellem Hautkrebs im privaten und im beruflichen Bereich.","short":"G. Kutz, in: Teil 11: Symposium der GD Task Force „Licht.Hautkrebs.Prävention“: Prävention von hellem Hautkrebs im privaten und im beruflichen Bereich, 2017.","van":"Kutz G. Galenik von aktuellen topischen Lichtschutzmitteln. In: Teil 11: Symposium der GD Task Force „LichtHautkrebsPrävention“: Prävention von hellem Hautkrebs im privaten und im beruflichen Bereich. 2017.","ama":"Kutz G. Galenik von aktuellen topischen Lichtschutzmitteln. In: Teil 11: Symposium der GD Task Force „Licht.Hautkrebs.Prävention“: Prävention von hellem Hautkrebs im privaten und im beruflichen Bereich. ; 2017.","ieee":"G. Kutz, “Galenik von aktuellen topischen Lichtschutzmitteln,” presented at the 21. Jahrestagung der GD, München, 2017.","havard":"G. Kutz, Galenik von aktuellen topischen Lichtschutzmitteln, in: Teil 11: Symposium der GD Task Force „Licht.Hautkrebs.Prävention“: Prävention von hellem Hautkrebs im privaten und im beruflichen Bereich, 2017."},"date_created":"2020-08-12T10:49:21Z","language":[{"iso":"ger"}],"publication_status":"published","related_material":{"link":[{"relation":"confirmation","url":"https://www.gd-online.de/german/veranstalt/images2017/21.GD_JT_2017_ABSTRACTS_Symposium_Task_Force_G_Kutz.pdf"}]},"date_updated":"2024-10-31T14:06:07Z","title":"Galenik von aktuellen topischen Lichtschutzmitteln"},{"abstract":[{"text":"In diesem Tagungsband sind die besten Beiträge des 7. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2016) und des 5. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2016) enthalten. Die Kolloquien fanden am 30. November und 1. Dezember 2016 anlässlich des 10jährigen Jubiläums des inIT - Institut für industrielle Informationstechnik in der SmartFactoryOWL, einer herstellerunabhängigen und offenen Industrie 4.0 Forschungs- und Demonstrationsplattform und zugleich Testfeld für den Mittelstand, in Lemgo statt.\r\nDie vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen Kommunikationstechnik und Bildverarbeitung erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen enthaltenen anschauliche Anwendungsbeispiele aus dem Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug.","lang":"ger"}],"page":"295","conference":{"location":"Lemgo","name":"7. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2016) / 5. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2016)","start_date":"2016-11-30","end_date":"2026-12-01"},"keyword":["Industrielle Kommunikationstechnik","Industrielle Bildverarbeitung","network reliability and redundancy methods","Networked Controls Systems","wireless real-time communication","quality control","reliability","safety and risk"],"status":"public","user_id":"83781","year":"2017","department":[{"_id":"DEP5023"}],"date_updated":"2025-05-12T08:19:51Z","doi":"10.1007/978-3-662-55232-2","editor":[{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker"}],"publisher":"Springer Vieweg","type":"book_editor","_id":"4506","series_title":"Technologien für die intelligente Automation ","title":" Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik","citation":{"havard":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Springer Vieweg, Berlin, 2017.","ufg":"Jasperneite, Jürgen/Lohweg, Volker: Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Bd. 7, Berlin 2017 (Technologien für die intelligente Automation ).","chicago-de":"Jasperneite, Jürgen und Volker Lohweg, Hrsg. 2017. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Bd. 7. Technologien für die intelligente Automation . Berlin: Springer Vieweg. doi:10.1007/978-3-662-55232-2, .","short":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Springer Vieweg, Berlin, 2017.","mla":"Jasperneite, Jürgen, and Volker Lohweg, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Springer Vieweg, 2017, https://doi.org/10.1007/978-3-662-55232-2.","apa":"Jasperneite, J., & Lohweg, V. (Eds.). (2017). Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik (Vol. 7). Springer Vieweg. https://doi.org/10.1007/978-3-662-55232-2","van":"Jasperneite J, Lohweg V, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Berlin: Springer Vieweg; 2017. 295 p. (Technologien für die intelligente Automation ; vol. 7).","ama":"Jasperneite J, Lohweg V, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Vol 7. Springer Vieweg; 2017. doi:10.1007/978-3-662-55232-2","ieee":"J. Jasperneite and V. Lohweg, Eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, vol. 7. Berlin: Springer Vieweg, 2017. doi: 10.1007/978-3-662-55232-2.","chicago":"Jasperneite, Jürgen, and Volker Lohweg, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Vol. 7. Technologien für die intelligente Automation . Berlin: Springer Vieweg, 2017. https://doi.org/10.1007/978-3-662-55232-2.","bjps":"Jasperneite J and Lohweg V (eds) (2017) Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Berlin: Springer Vieweg.","din1505-2-1":"Jasperneite, J. ; Lohweg, V. (Hrsg.): Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Technologien für die intelligente Automation . Bd. 7. Berlin : Springer Vieweg, 2017"},"place":"Berlin","volume":7,"publication_status":"published","date_created":"2021-01-22T08:40:04Z","language":[{"iso":"ger"}],"intvolume":" 7","publication_identifier":{"isbn":["978-3-662-55231-5"],"eisbn":["978-3-662-55232-2 "]}},{"page":"59-71","_id":"4507","status":"public","publication":"Handbuch Industrie 4.0 Bd.2","year":2017,"user_id":"74222","department":[{"_id":"DEP5023"}],"date_updated":"2023-03-15T13:49:53Z","title":"„Plug Produce“ als Anwendungsfall von Industrie 4.0","citation":{"havard":"L. Dürkop, J. Jasperneite, „Plug Produce“ als Anwendungsfall von Industrie 4.0, in: Handbuch Industrie 4.0 Bd.2, Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , Springer-Verlag, 2017: pp. 59–71.","ufg":"Dürkop, Lars/Jasperneite, Jürgen (2017): „Plug Produce“ als Anwendungsfall von Industrie 4.0, in: Handbuch Industrie 4.0 Bd.2, Springer-Verlag, S. 59–71.","chicago-de":"Dürkop, Lars und Jürgen Jasperneite. 2017. „Plug Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 4.0 Bd.2, 59–71. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) .","short":"L. Dürkop, J. Jasperneite, in: Handbuch Industrie 4.0 Bd.2, Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , Springer-Verlag, 2017, pp. 59–71.","mla":"Dürkop, Lars, and Jürgen Jasperneite. “„Plug Produce“ Als Anwendungsfall von Industrie 4.0.” Handbuch Industrie 4.0 Bd.2, Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , 2017, pp. 59–71.","apa":"Dürkop, L., & Jasperneite, J. (2017). „Plug Produce“ als Anwendungsfall von Industrie 4.0. In Handbuch Industrie 4.0 Bd.2 (pp. 59–71). Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) .","van":"Dürkop L, Jasperneite J. „Plug Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 40 Bd2. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) ; 2017. p. 59–71.","ama":"Dürkop L, Jasperneite J. „Plug Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 4.0 Bd.2. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) ; 2017:59-71.","ieee":"L. Dürkop and J. Jasperneite, “„Plug Produce“ als Anwendungsfall von Industrie 4.0,” in Handbuch Industrie 4.0 Bd.2, 2017, pp. 59–71.","chicago":"Dürkop, Lars, and Jürgen Jasperneite. “„Plug Produce“ Als Anwendungsfall von Industrie 4.0.” In Handbuch Industrie 4.0 Bd.2, 59–71. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , 2017.","bjps":"Dürkop L and Jasperneite J (2017) „Plug Produce“ Als Anwendungsfall von Industrie 4.0. Handbuch Industrie 4.0 Bd.2. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , pp. 59–71.","din1505-2-1":"Dürkop, Lars ; Jasperneite, Jürgen: „Plug Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 4.0 Bd.2. Springer-Verlag : Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , 2017, S. 59–71"},"place":"Springer-Verlag","publisher":"Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) ","date_created":"2021-01-22T08:41:41Z","language":[{"iso":"eng"}],"author":[{"first_name":"Lars","last_name":"Dürkop","full_name":"Dürkop, Lars"},{"first_name":"Jürgen","id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"type":"conference"},{"user_id":"74222","year":2017,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","publication":"Handbuch Industrie 4.0 Bd.2","_id":"4579","page":"59-71","type":"conference","author":[{"first_name":"Lars","full_name":"Dürkop, Lars","last_name":"Dürkop"},{"full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite","first_name":"Jürgen"}],"place":"Springer-Verlag","citation":{"short":"L. Dürkop, J. Jasperneite, in: Handbuch Industrie 4.0 Bd.2, Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , Springer-Verlag, 2017, pp. 59–71.","apa":"Dürkop, L., & Jasperneite, J. (2017). „Plug Produce“ als Anwendungsfall von Industrie 4.0. In Handbuch Industrie 4.0 Bd.2 (pp. 59–71). Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) .","mla":"Dürkop, Lars, and Jürgen Jasperneite. “„Plug Produce“ Als Anwendungsfall von Industrie 4.0.” Handbuch Industrie 4.0 Bd.2, Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , 2017, pp. 59–71.","ufg":"Dürkop, Lars/Jasperneite, Jürgen (2017): „Plug Produce“ als Anwendungsfall von Industrie 4.0, in: Handbuch Industrie 4.0 Bd.2, Springer-Verlag, S. 59–71.","chicago-de":"Dürkop, Lars und Jürgen Jasperneite. 2017. „Plug Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 4.0 Bd.2, 59–71. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) .","havard":"L. Dürkop, J. Jasperneite, „Plug Produce“ als Anwendungsfall von Industrie 4.0, in: Handbuch Industrie 4.0 Bd.2, Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , Springer-Verlag, 2017: pp. 59–71.","bjps":"Dürkop L and Jasperneite J (2017) „Plug Produce“ Als Anwendungsfall von Industrie 4.0. Handbuch Industrie 4.0 Bd.2. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , pp. 59–71.","din1505-2-1":"Dürkop, Lars ; Jasperneite, Jürgen: „Plug Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 4.0 Bd.2. Springer-Verlag : Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , 2017, S. 59–71","chicago":"Dürkop, Lars, and Jürgen Jasperneite. “„Plug Produce“ Als Anwendungsfall von Industrie 4.0.” In Handbuch Industrie 4.0 Bd.2, 59–71. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , 2017.","ieee":"L. Dürkop and J. Jasperneite, “„Plug Produce“ als Anwendungsfall von Industrie 4.0,” in Handbuch Industrie 4.0 Bd.2, 2017, pp. 59–71.","van":"Dürkop L, Jasperneite J. „Plug Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 40 Bd2. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) ; 2017. p. 59–71.","ama":"Dürkop L, Jasperneite J. „Plug Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 4.0 Bd.2. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) ; 2017:59-71."},"language":[{"iso":"eng"}],"date_created":"2021-01-28T09:16:19Z","publisher":"Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) ","date_updated":"2023-03-15T13:49:54Z","title":"„Plug Produce“ als Anwendungsfall von Industrie 4.0"},{"_id":"4580","status":"public","publication":"Kommunikation in der Automation - KommA 2017","user_id":"74222","year":2017,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"date_updated":"2023-03-15T13:49:54Z","title":"Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation","place":"Magdeburg; Germany","citation":{"chicago":"Ehrlich, Marco, Alexander Biendarra, Henning Trsek, Emanuel Wojtkowiak, and Jürgen Jasperneite. “Passive Flow Monitoring of Hybrid Network Connections Regarding Quality of Service Parameters for the Industrial Automation.” In Kommunikation in Der Automation - KommA 2017. Magdeburg; Germany, 2017.","chicago-de":"Ehrlich, Marco, Alexander Biendarra, Henning Trsek, Emanuel Wojtkowiak und Jürgen Jasperneite. 2017. Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation. In: Kommunikation in der Automation - KommA 2017. Magdeburg; Germany.","ufg":"Ehrlich, Marco et. al. (2017): Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation, in: Kommunikation in der Automation - KommA 2017, Magdeburg; Germany.","din1505-2-1":"Ehrlich, Marco ; Biendarra, Alexander ; Trsek, Henning ; Wojtkowiak, Emanuel ; Jasperneite, Jürgen: Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation. In: Kommunikation in der Automation - KommA 2017. Magdeburg; Germany, 2017","mla":"Ehrlich, Marco, et al. “Passive Flow Monitoring of Hybrid Network Connections Regarding Quality of Service Parameters for the Industrial Automation.” Kommunikation in Der Automation - KommA 2017, 2017.","apa":"Ehrlich, M., Biendarra, A., Trsek, H., Wojtkowiak, E., & Jasperneite, J. (2017). Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation. In Kommunikation in der Automation - KommA 2017. Magdeburg; Germany.","bjps":"Ehrlich M et al. (2017) Passive Flow Monitoring of Hybrid Network Connections Regarding Quality of Service Parameters for the Industrial Automation. Kommunikation in Der Automation - KommA 2017. Magdeburg; Germany.","short":"M. Ehrlich, A. Biendarra, H. Trsek, E. Wojtkowiak, J. Jasperneite, in: Kommunikation in Der Automation - KommA 2017, Magdeburg; Germany, 2017.","van":"Ehrlich M, Biendarra A, Trsek H, Wojtkowiak E, Jasperneite J. Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation. In: Kommunikation in der Automation - KommA 2017. Magdeburg; Germany; 2017.","ama":"Ehrlich M, Biendarra A, Trsek H, Wojtkowiak E, Jasperneite J. Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation. In: Kommunikation in Der Automation - KommA 2017. Magdeburg; Germany; 2017.","ieee":"M. Ehrlich, A. Biendarra, H. Trsek, E. Wojtkowiak, and J. Jasperneite, “Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation,” in Kommunikation in der Automation - KommA 2017, 2017.","havard":"M. Ehrlich, A. Biendarra, H. Trsek, E. Wojtkowiak, J. Jasperneite, Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation, in: Kommunikation in Der Automation - KommA 2017, Magdeburg; Germany, 2017."},"date_created":"2021-01-28T09:18:10Z","language":[{"iso":"eng"}],"type":"conference","author":[{"full_name":"Ehrlich, Marco","last_name":"Ehrlich","id":"61562","first_name":"Marco"},{"last_name":"Biendarra","full_name":"Biendarra, Alexander","first_name":"Alexander"},{"last_name":"Trsek","id":"1486","full_name":"Trsek, Henning","first_name":"Henning"},{"full_name":"Wojtkowiak, Emanuel","last_name":"Wojtkowiak","first_name":"Emanuel"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899"}]},{"date_created":"2021-01-28T09:19:56Z","language":[{"iso":"eng"}],"place":"Magdeburg, Germany","citation":{"van":"Schriegel S, Pieper C, Gamper S, Biendarra A, Jasperneite J. Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports. In: Kommunikation in der Automation - KommA 2017. Magdeburg, Germany; 2017.","ama":"Schriegel S, Pieper C, Gamper S, Biendarra A, Jasperneite J. Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports. In: Kommunikation in Der Automation - KommA 2017. Magdeburg, Germany; 2017.","ieee":"S. Schriegel, C. Pieper, S. Gamper, A. Biendarra, and J. Jasperneite, “Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports,” in Kommunikation in der Automation - KommA 2017, 2017.","havard":"S. Schriegel, C. Pieper, S. Gamper, A. Biendarra, J. Jasperneite, Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports, in: Kommunikation in Der Automation - KommA 2017, Magdeburg, Germany, 2017.","ufg":"Schriegel, Sebastian et. al. (2017): Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports, in: Kommunikation in der Automation - KommA 2017, Magdeburg, Germany.","chicago-de":"Schriegel, Sebastian, Carsten Pieper, Sergej Gamper, Alexander Biendarra und Jürgen Jasperneite. 2017. Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports. In: Kommunikation in der Automation - KommA 2017. Magdeburg, Germany.","chicago":"Schriegel, Sebastian, Carsten Pieper, Sergej Gamper, Alexander Biendarra, and Jürgen Jasperneite. “Vereinfachtes Ethernet TSN-Implementierungsmodell Für Feldgeräte Mit Zwei Ports.” In Kommunikation in Der Automation - KommA 2017. Magdeburg, Germany, 2017.","short":"S. Schriegel, C. Pieper, S. Gamper, A. Biendarra, J. Jasperneite, in: Kommunikation in Der Automation - KommA 2017, Magdeburg, Germany, 2017.","bjps":"Schriegel S et al. (2017) Vereinfachtes Ethernet TSN-Implementierungsmodell Für Feldgeräte Mit Zwei Ports. Kommunikation in Der Automation - KommA 2017. Magdeburg, Germany.","din1505-2-1":"Schriegel, Sebastian ; Pieper, Carsten ; Gamper, Sergej ; Biendarra, Alexander ; Jasperneite, Jürgen: Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports. In: Kommunikation in der Automation - KommA 2017. Magdeburg, Germany, 2017","apa":"Schriegel, S., Pieper, C., Gamper, S., Biendarra, A., & Jasperneite, J. (2017). Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports. In Kommunikation in der Automation - KommA 2017. Magdeburg, Germany.","mla":"Schriegel, Sebastian, et al. “Vereinfachtes Ethernet TSN-Implementierungsmodell Für Feldgeräte Mit Zwei Ports.” Kommunikation in Der Automation - KommA 2017, 2017."},"type":"conference","author":[{"last_name":"Schriegel","full_name":"Schriegel, Sebastian","first_name":"Sebastian"},{"full_name":"Pieper, Carsten","last_name":"Pieper","id":"2006","first_name":"Carsten"},{"first_name":"Sergej","last_name":"Gamper","full_name":"Gamper, Sergej"},{"first_name":"Alexander","full_name":"Biendarra, Alexander","last_name":"Biendarra"},{"first_name":"Jürgen","id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"title":"Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports","date_updated":"2023-03-15T13:49:54Z","publication":"Kommunikation in der Automation - KommA 2017","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2017,"user_id":"74222","_id":"4581"},{"title":"Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation","date_updated":"2023-03-15T13:49:54Z","date_created":"2021-01-28T09:21:20Z","language":[{"iso":"eng"}],"place":"Magdebur, Germany","citation":{"havard":"M.J. Mytych, L. Wisniewski, J. Jasperneite, Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation, in: Kommunikation in Der Automation - KommA 2017, Magdebur, Germany, 2017.","ufg":"Mytych, Martin Jan et. al. (2017): Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation, in: Kommunikation in der Automation - KommA 2017, Magdebur, Germany.","chicago-de":"Mytych, Martin Jan, Lukasz Wisniewski und Jürgen Jasperneite. 2017. Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation. In: Kommunikation in der Automation - KommA 2017. Magdebur, Germany.","short":"M.J. Mytych, L. Wisniewski, J. Jasperneite, in: Kommunikation in Der Automation - KommA 2017, Magdebur, Germany, 2017.","mla":"Mytych, Martin Jan, et al. “Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation.” Kommunikation in Der Automation - KommA 2017, 2017.","apa":"Mytych, M. J., Wisniewski, L., & Jasperneite, J. (2017). Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation. In Kommunikation in der Automation - KommA 2017. Magdebur, Germany.","ama":"Mytych MJ, Wisniewski L, Jasperneite J. Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation. In: Kommunikation in Der Automation - KommA 2017. Magdebur, Germany; 2017.","van":"Mytych MJ, Wisniewski L, Jasperneite J. Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation. In: Kommunikation in der Automation - KommA 2017. Magdebur, Germany; 2017.","ieee":"M. J. Mytych, L. Wisniewski, and J. Jasperneite, “Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation,” in Kommunikation in der Automation - KommA 2017, 2017.","chicago":"Mytych, Martin Jan, Lukasz Wisniewski, and Jürgen Jasperneite. “Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation.” In Kommunikation in Der Automation - KommA 2017. Magdebur, Germany, 2017.","bjps":"Mytych MJ, Wisniewski L and Jasperneite J (2017) Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation. Kommunikation in Der Automation - KommA 2017. Magdebur, Germany.","din1505-2-1":"Mytych, Martin Jan ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation. In: Kommunikation in der Automation - KommA 2017. Magdebur, Germany, 2017"},"author":[{"last_name":"Mytych","full_name":"Mytych, Martin Jan","first_name":"Martin Jan"},{"first_name":"Lukasz","last_name":"Wisniewski","id":"1710","full_name":"Wisniewski, Lukasz"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899"}],"type":"conference","_id":"4582","publication":"Kommunikation in der Automation - KommA 2017","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2017,"user_id":"74222"},{"status":"public","publication":"Kommunikation in der Automation - KommA 2017","user_id":"74222","year":2017,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"_id":"4583","citation":{"chicago-de":"Pieper, Carsten, Thomas Kobzan, Sebastian Schriegel und Jürgen Jasperneite. 2017. LoRaWAN-basierte IoT-Infrastruktur. Kommunikation in der Automation - KommA 2017.","ufg":"Pieper, Carsten et. al. (2017): LoRaWAN-basierte IoT-Infrastruktur, in: Kommunikation in der Automation - KommA 2017.","mla":"Pieper, Carsten, et al. “LoRaWAN-Basierte IoT-Infrastruktur.” Kommunikation in Der Automation - KommA 2017, 2017.","apa":"Pieper, C., Kobzan, T., Schriegel, S., & Jasperneite, J. (2017). LoRaWAN-basierte IoT-Infrastruktur. Kommunikation in Der Automation - KommA 2017.","short":"C. Pieper, T. Kobzan, S. Schriegel, J. Jasperneite, Kommunikation in Der Automation - KommA 2017 (2017).","havard":"C. Pieper, T. Kobzan, S. Schriegel, J. Jasperneite, LoRaWAN-basierte IoT-Infrastruktur, Kommunikation in Der Automation - KommA 2017. (2017).","chicago":"Pieper, Carsten, Thomas Kobzan, Sebastian Schriegel, and Jürgen Jasperneite. “LoRaWAN-Basierte IoT-Infrastruktur.” Kommunikation in Der Automation - KommA 2017, 2017.","din1505-2-1":"Pieper, Carsten ; Kobzan, Thomas ; Schriegel, Sebastian ; Jasperneite, Jürgen: LoRaWAN-basierte IoT-Infrastruktur. In: Kommunikation in der Automation - KommA 2017 (2017)","bjps":"Pieper C et al. (2017) LoRaWAN-Basierte IoT-Infrastruktur. Kommunikation in der Automation - KommA 2017.","van":"Pieper C, Kobzan T, Schriegel S, Jasperneite J. LoRaWAN-basierte IoT-Infrastruktur. Kommunikation in der Automation - KommA 2017. 2017;","ama":"Pieper C, Kobzan T, Schriegel S, Jasperneite J. LoRaWAN-basierte IoT-Infrastruktur. Kommunikation in der Automation - KommA 2017. 2017.","ieee":"C. Pieper, T. Kobzan, S. Schriegel, and J. Jasperneite, “LoRaWAN-basierte IoT-Infrastruktur,” Kommunikation in der Automation - KommA 2017, 2017."},"language":[{"iso":"eng"}],"date_created":"2021-01-28T09:22:49Z","author":[{"first_name":"Carsten","full_name":"Pieper, Carsten","id":"2006","last_name":"Pieper"},{"full_name":"Kobzan, Thomas","last_name":"Kobzan","first_name":"Thomas"},{"full_name":"Schriegel, Sebastian","last_name":"Schriegel","first_name":"Sebastian"},{"first_name":"Jürgen","id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"type":"journal_article","date_updated":"2023-03-15T13:49:54Z","title":"LoRaWAN-basierte IoT-Infrastruktur"},{"_id":"4584","date_updated":"2023-03-15T13:49:54Z","title":"Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten","user_id":"74222","year":2017,"type":"journal_article","author":[{"last_name":"Schumacher","full_name":"Schumacher, Markus","first_name":"Markus"},{"id":"1710","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz","first_name":"Lukasz"},{"last_name":"Schriegel","full_name":"Schriegel, Sebastian","first_name":"Sebastian"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","citation":{"ieee":"M. Schumacher, L. Wisniewski, S. Schriegel, and J. Jasperneite, “Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten,” Kommunikation in der Automation - KommA 2015, 2017.","havard":"M. Schumacher, L. Wisniewski, S. Schriegel, J. Jasperneite, Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten, Kommunikation in Der Automation - KommA 2015. (2017).","van":"Schumacher M, Wisniewski L, Schriegel S, Jasperneite J. Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten. Kommunikation in der Automation - KommA 2015. 2017;","ama":"Schumacher M, Wisniewski L, Schriegel S, Jasperneite J. Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten. Kommunikation in der Automation - KommA 2015. 2017.","bjps":"Schumacher M et al. (2017) Anforderung an Hard- Und Software-Co-Design Zur Realisierung Minimaler Zykluszeiten. Kommunikation in der Automation - KommA 2015.","short":"M. Schumacher, L. Wisniewski, S. Schriegel, J. Jasperneite, Kommunikation in Der Automation - KommA 2015 (2017).","din1505-2-1":"Schumacher, Markus ; Wisniewski, Lukasz ; Schriegel, Sebastian ; Jasperneite, Jürgen: Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten. In: Kommunikation in der Automation - KommA 2015 (2017)","apa":"Schumacher, M., Wisniewski, L., Schriegel, S., & Jasperneite, J. (2017). Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten. Kommunikation in Der Automation - KommA 2015.","mla":"Schumacher, Markus, et al. “Anforderung an Hard- Und Software-Co-Design Zur Realisierung Minimaler Zykluszeiten.” Kommunikation in Der Automation - KommA 2015, 2017.","ufg":"Schumacher, Markus et. al. (2017): Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten, in: Kommunikation in der Automation - KommA 2015.","chicago-de":"Schumacher, Markus, Lukasz Wisniewski, Sebastian Schriegel und Jürgen Jasperneite. 2017. Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten. Kommunikation in der Automation - KommA 2015.","chicago":"Schumacher, Markus, Lukasz Wisniewski, Sebastian Schriegel, and Jürgen Jasperneite. “Anforderung an Hard- Und Software-Co-Design Zur Realisierung Minimaler Zykluszeiten.” Kommunikation in Der Automation - KommA 2015, 2017."},"language":[{"iso":"eng"}],"date_created":"2021-01-28T09:24:01Z","publication":"Kommunikation in der Automation - KommA 2015"},{"title":"Wie verändert Industrie 4.0 Arbeit und Alltag? ","date_updated":"2023-03-15T13:49:54Z","type":"conference","author":[{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899"}],"date_created":"2021-01-28T09:31:18Z","language":[{"iso":"eng"}],"place":"Lemgo","citation":{"ama":"Jasperneite J. Wie verändert Industrie 4.0 Arbeit und Alltag? . In: Vortrag Im Rahmen Der OWL-Gespräche Der Friedrich-Ebert-Stiftung . Lemgo; 2017.","van":"Jasperneite J. Wie verändert Industrie 4.0 Arbeit und Alltag? . In: Vortrag im Rahmen der OWL-Gespräche der Friedrich-Ebert-Stiftung . Lemgo; 2017.","ieee":"J. Jasperneite, “Wie verändert Industrie 4.0 Arbeit und Alltag? ,” in Vortrag im Rahmen der OWL-Gespräche der Friedrich-Ebert-Stiftung , 2017.","chicago":"Jasperneite, Jürgen. “Wie Verändert Industrie 4.0 Arbeit Und Alltag? .” In Vortrag Im Rahmen Der OWL-Gespräche Der Friedrich-Ebert-Stiftung . Lemgo, 2017.","din1505-2-1":"Jasperneite, Jürgen: Wie verändert Industrie 4.0 Arbeit und Alltag? . In: Vortrag im Rahmen der OWL-Gespräche der Friedrich-Ebert-Stiftung . Lemgo, 2017","bjps":"Jasperneite J (2017) Wie Verändert Industrie 4.0 Arbeit Und Alltag? . Vortrag Im Rahmen Der OWL-Gespräche Der Friedrich-Ebert-Stiftung . Lemgo.","havard":"J. Jasperneite, Wie verändert Industrie 4.0 Arbeit und Alltag? , in: Vortrag Im Rahmen Der OWL-Gespräche Der Friedrich-Ebert-Stiftung , Lemgo, 2017.","chicago-de":"Jasperneite, Jürgen. 2017. Wie verändert Industrie 4.0 Arbeit und Alltag? . In: Vortrag im Rahmen der OWL-Gespräche der Friedrich-Ebert-Stiftung . Lemgo.","ufg":"Jasperneite, Jürgen (2017): Wie verändert Industrie 4.0 Arbeit und Alltag? , in: Vortrag im Rahmen der OWL-Gespräche der Friedrich-Ebert-Stiftung , Lemgo.","mla":"Jasperneite, Jürgen. “Wie Verändert Industrie 4.0 Arbeit Und Alltag? .” Vortrag Im Rahmen Der OWL-Gespräche Der Friedrich-Ebert-Stiftung , 2017.","apa":"Jasperneite, J. (2017). Wie verändert Industrie 4.0 Arbeit und Alltag? . In Vortrag im Rahmen der OWL-Gespräche der Friedrich-Ebert-Stiftung . Lemgo.","short":"J. Jasperneite, in: Vortrag Im Rahmen Der OWL-Gespräche Der Friedrich-Ebert-Stiftung , Lemgo, 2017."},"_id":"4585","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"74222","year":2017,"publication":"Vortrag im Rahmen der OWL-Gespräche der Friedrich-Ebert-Stiftung ","status":"public"},{"status":"public","publication":"open automation, Ausgabe 5/2017","year":2017,"user_id":"45673","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"page":"50-53","_id":"4588","place":"Berlin","citation":{"chicago-de":"Jasperneite, Jürgen, Uwe Meier, Arne Neumann und Nico Wiebusch. 2017. Industrial Wireless: Koexistenz und hybride Systeme. open automation, Ausgabe 5/2017: 50–53.","chicago":"Jasperneite, Jürgen, Uwe Meier, Arne Neumann, and Nico Wiebusch. “Industrial Wireless: Koexistenz Und Hybride Systeme.” Open Automation, Ausgabe 5/2017, 2017, 50–53.","ufg":"Jasperneite, Jürgen et. al. (2017): Industrial Wireless: Koexistenz und hybride Systeme, in: open automation, Ausgabe 5/2017, S. 50–53.","din1505-2-1":"Jasperneite, Jürgen ; Meier, Uwe ; Neumann, Arne ; Wiebusch, Nico: Industrial Wireless: Koexistenz und hybride Systeme. In: open automation, Ausgabe 5/2017. Berlin, VDE Verlag (2017), S. 50–53","apa":"Jasperneite, J., Meier, U., Neumann, A., & Wiebusch, N. (2017). Industrial Wireless: Koexistenz und hybride Systeme. Open Automation, Ausgabe 5/2017, 50–53.","mla":"Jasperneite, Jürgen, et al. “Industrial Wireless: Koexistenz Und Hybride Systeme.” Open Automation, Ausgabe 5/2017, VDE Verlag, 2017, pp. 50–53.","bjps":"Jasperneite J et al. (2017) Industrial Wireless: Koexistenz Und Hybride Systeme. open automation, Ausgabe 5/2017 50–53.","short":"J. Jasperneite, U. Meier, A. Neumann, N. Wiebusch, Open Automation, Ausgabe 5/2017 (2017) 50–53.","van":"Jasperneite J, Meier U, Neumann A, Wiebusch N. Industrial Wireless: Koexistenz und hybride Systeme. open automation, Ausgabe 5/2017. 2017;50–3.","ama":"Jasperneite J, Meier U, Neumann A, Wiebusch N. Industrial Wireless: Koexistenz und hybride Systeme. open automation, Ausgabe 5/2017. 2017:50-53.","ieee":"J. Jasperneite, U. Meier, A. Neumann, and N. Wiebusch, “Industrial Wireless: Koexistenz und hybride Systeme,” open automation, Ausgabe 5/2017, pp. 50–53, 2017.","havard":"J. Jasperneite, U. Meier, A. Neumann, N. Wiebusch, Industrial Wireless: Koexistenz und hybride Systeme, Open Automation, Ausgabe 5/2017. (2017) 50–53."},"date_created":"2021-01-28T09:37:22Z","language":[{"iso":"eng"}],"publisher":"VDE Verlag","type":"scientific_journal_article","author":[{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899"},{"first_name":"Uwe","id":"1143","last_name":"Meier","full_name":"Meier, Uwe"},{"full_name":"Neumann, Arne","last_name":"Neumann","id":"61915","first_name":"Arne"},{"full_name":"Wiebusch, Nico","last_name":"Wiebusch","first_name":"Nico"}],"date_updated":"2023-03-15T13:49:54Z","title":"Industrial Wireless: Koexistenz und hybride Systeme"},{"status":"public","publication":" Automation 2017, Baden-Baden","user_id":"74222","year":2017,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"_id":"4589","citation":{"bjps":"Schriegel S et al. (2017) PROFIanalytics - Die Brücke Zwischen PROFINET Und Cloud-Basierter Prozessdatenanalyse. Automation 2017, Baden-Baden.","din1505-2-1":"Schriegel, Sebastian ; Pethig, Florian ; Windmann, Stefan ; Jasperneite, Jürgen: PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse. In: Automation 2017, Baden-Baden (2017)","chicago":"Schriegel, Sebastian, Florian Pethig, Stefan Windmann, and Jürgen Jasperneite. “PROFIanalytics - Die Brücke Zwischen PROFINET Und Cloud-Basierter Prozessdatenanalyse.” Automation 2017, Baden-Baden, 2017.","ieee":"S. Schriegel, F. Pethig, S. Windmann, and J. Jasperneite, “PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse,” Automation 2017, Baden-Baden, 2017.","van":"Schriegel S, Pethig F, Windmann S, Jasperneite J. PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse. Automation 2017, Baden-Baden. 2017;","ama":"Schriegel S, Pethig F, Windmann S, Jasperneite J. PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse. Automation 2017, Baden-Baden. 2017.","short":"S. Schriegel, F. Pethig, S. Windmann, J. Jasperneite, Automation 2017, Baden-Baden (2017).","mla":"Schriegel, Sebastian, et al. “PROFIanalytics - Die Brücke Zwischen PROFINET Und Cloud-Basierter Prozessdatenanalyse.” Automation 2017, Baden-Baden, 2017.","apa":"Schriegel, S., Pethig, F., Windmann, S., & Jasperneite, J. (2017). PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse. Automation 2017, Baden-Baden.","ufg":"Schriegel, Sebastian et. al. (2017): PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse, in: Automation 2017, Baden-Baden.","chicago-de":"Schriegel, Sebastian, Florian Pethig, Stefan Windmann und Jürgen Jasperneite. 2017. PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse. Automation 2017, Baden-Baden.","havard":"S. Schriegel, F. Pethig, S. Windmann, J. Jasperneite, PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse, Automation 2017, Baden-Baden. (2017)."},"date_created":"2021-01-28T09:38:54Z","language":[{"iso":"eng"}],"author":[{"full_name":"Schriegel, Sebastian","last_name":"Schriegel","first_name":"Sebastian"},{"first_name":"Florian","full_name":"Pethig, Florian","last_name":"Pethig"},{"full_name":"Windmann, Stefan","last_name":"Windmann","id":"58525","first_name":"Stefan"},{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"}],"type":"journal_article","date_updated":"2023-03-15T13:49:54Z","title":"PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse"},{"status":"public","publication":"I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf","user_id":"74222","year":2017,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"_id":"4592","citation":{"ufg":"Jasperneite, Jürgen (2017): Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL, in: I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf.","chicago-de":"Jasperneite, Jürgen. 2017. Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL. I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf.","short":"J. Jasperneite, I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf (2017).","mla":"Jasperneite, Jürgen. “Wie Kommt Industrie 4.0 in Den Mittelstand? - Erfahrungen Aus Der SmartFactoryOWL.” I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf, 2017.","apa":"Jasperneite, J. (2017). Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL. I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf.","havard":"J. Jasperneite, Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL, I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf. (2017).","chicago":"Jasperneite, Jürgen. “Wie Kommt Industrie 4.0 in Den Mittelstand? - Erfahrungen Aus Der SmartFactoryOWL.” I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf, 2017.","bjps":"Jasperneite J (2017) Wie Kommt Industrie 4.0 in Den Mittelstand? - Erfahrungen Aus Der SmartFactoryOWL. I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf.","din1505-2-1":"Jasperneite, Jürgen: Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL. In: I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf (2017)","ama":"Jasperneite J. Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL. I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf. 2017.","van":"Jasperneite J. Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL. I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf. 2017;","ieee":"J. Jasperneite, “Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL,” I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf, 2017."},"language":[{"iso":"eng"}],"date_created":"2021-01-28T09:51:26Z","type":"journal_article","author":[{"full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite","first_name":"Jürgen"}],"date_updated":"2023-03-15T13:49:54Z","title":"Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL"},{"status":"public","publication":"22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern","year":2017,"user_id":"74222","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"_id":"4593","citation":{"apa":"Ehrlich, M., Trsek, H., Wisniewski, L., & Jasperneite, J. (2017). Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks. In 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern.","mla":"Ehrlich, Marco, et al. “Automatic Mapping of Cyber Security Requirements to Support Network Slicing in Software-Defined Networks.” 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern, 2017.","din1505-2-1":"Ehrlich, Marco ; Trsek, Henning ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks. In: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern, 2017","short":"M. Ehrlich, H. Trsek, L. Wisniewski, J. Jasperneite, in: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern, 2017.","bjps":"Ehrlich M et al. (2017) Automatic Mapping of Cyber Security Requirements to Support Network Slicing in Software-Defined Networks. 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern.","chicago-de":"Ehrlich, Marco, Henning Trsek, Lukasz Wisniewski und Jürgen Jasperneite. 2017. Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks. In: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern.","chicago":"Ehrlich, Marco, Henning Trsek, Lukasz Wisniewski, and Jürgen Jasperneite. “Automatic Mapping of Cyber Security Requirements to Support Network Slicing in Software-Defined Networks.” In 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern, 2017.","ufg":"Ehrlich, Marco et. al. (2017): Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks, in: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern.","havard":"M. Ehrlich, H. Trsek, L. Wisniewski, J. Jasperneite, Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks, in: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern, 2017.","ieee":"M. Ehrlich, H. Trsek, L. Wisniewski, and J. Jasperneite, “Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks,” in 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern, 2017.","ama":"Ehrlich M, Trsek H, Wisniewski L, Jasperneite J. Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks. In: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern. ; 2017.","van":"Ehrlich M, Trsek H, Wisniewski L, Jasperneite J. Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks. In: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern. 2017."},"date_created":"2021-01-28T09:52:45Z","language":[{"iso":"eng"}],"type":"conference","author":[{"id":"61562","last_name":"Ehrlich","full_name":"Ehrlich, Marco","first_name":"Marco"},{"first_name":"Henning","full_name":"Trsek, Henning","last_name":"Trsek","id":"1486"},{"first_name":"Lukasz","id":"1710","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899"}],"date_updated":"2023-03-15T13:49:54Z","title":"Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks"},{"status":"public","publication":"22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017)","user_id":"74222","year":2017,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"_id":"4594","place":"Limassol, Cyprus","citation":{"apa":"Henneke, D., Freudenmann, C., Wisniewski, L., & Jasperneite, J. (2017). Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context. In 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017). Limassol, Cyprus.","mla":"Henneke, Dominik, et al. “Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context.” 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017), 2017.","din1505-2-1":"Henneke, Dominik ; Freudenmann, Christian ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context. In: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017). Limassol, Cyprus, 2017","bjps":"Henneke D et al. (2017) Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context. 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017). Limassol, Cyprus.","short":"D. Henneke, C. Freudenmann, L. Wisniewski, J. Jasperneite, in: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017), Limassol, Cyprus, 2017.","chicago-de":"Henneke, Dominik, Christian Freudenmann, Lukasz Wisniewski und Jürgen Jasperneite. 2017. Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context. In: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017). Limassol, Cyprus.","chicago":"Henneke, Dominik, Christian Freudenmann, Lukasz Wisniewski, and Jürgen Jasperneite. “Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context.” In 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017). Limassol, Cyprus, 2017.","ufg":"Henneke, Dominik et. al. (2017): Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context, in: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017), Limassol, Cyprus.","havard":"D. Henneke, C. Freudenmann, L. Wisniewski, J. Jasperneite, Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context, in: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017), Limassol, Cyprus, 2017.","ieee":"D. Henneke, C. Freudenmann, L. Wisniewski, and J. Jasperneite, “Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context,” in 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017), 2017.","ama":"Henneke D, Freudenmann C, Wisniewski L, Jasperneite J. Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context. In: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017). Limassol, Cyprus; 2017.","van":"Henneke D, Freudenmann C, Wisniewski L, Jasperneite J. Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context. In: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017). Limassol, Cyprus; 2017."},"language":[{"iso":"eng"}],"date_created":"2021-01-28T09:53:59Z","author":[{"full_name":"Henneke, Dominik","id":"52007","last_name":"Henneke","first_name":"Dominik"},{"full_name":"Freudenmann, Christian","last_name":"Freudenmann","first_name":"Christian"},{"full_name":"Wisniewski, Lukasz","last_name":"Wisniewski","id":"1710","first_name":"Lukasz"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"type":"conference","date_updated":"2023-03-15T13:49:54Z","title":"Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context"},{"status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2017,"user_id":"15514","_id":"4595","oa":"1","date_created":"2021-01-28T09:54:58Z","publisher":"VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.","language":[{"iso":"eng"}],"publication_status":"published","place":"Frankfurt, Germany","citation":{"havard":"F. Pethig, S. Schriegel, A. Maier, J. Otto, S. Windmann, B. Böttcher, O. Niggemann, J. Jasperneite, Industrie 4.0 Communication Guideline Based on OPC UA, VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., Frankfurt, Germany, 2017.","chicago-de":"Pethig, Florian, Sebastian Schriegel, Alexander Maier, Jens Otto, Stefan Windmann, Björn Böttcher, Oliver Niggemann und Jürgen Jasperneite. 2017. Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.","ufg":"Pethig, Florian et. al. (2017): Industrie 4.0 Communication Guideline Based on OPC UA, Frankfurt, Germany.","apa":"Pethig, F., Schriegel, S., Maier, A., Otto, J., Windmann, S., Böttcher, B., … Jasperneite, J. (2017). Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.","mla":"Pethig, Florian, et al. Industrie 4.0 Communication Guideline Based on OPC UA. VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., 2017.","short":"F. Pethig, S. Schriegel, A. Maier, J. Otto, S. Windmann, B. Böttcher, O. Niggemann, J. Jasperneite, Industrie 4.0 Communication Guideline Based on OPC UA, VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., Frankfurt, Germany, 2017.","ama":"Pethig F, Schriegel S, Maier A, et al. Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.; 2017.","van":"Pethig F, Schriegel S, Maier A, Otto J, Windmann S, Böttcher B, et al. Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.; 2017.","ieee":"F. Pethig et al., Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., 2017.","chicago":"Pethig, Florian, Sebastian Schriegel, Alexander Maier, Jens Otto, Stefan Windmann, Björn Böttcher, Oliver Niggemann, and Jürgen Jasperneite. Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., 2017.","din1505-2-1":"Pethig, Florian ; Schriegel, Sebastian ; Maier, Alexander ; Otto, Jens ; Windmann, Stefan ; Böttcher, Björn ; Niggemann, Oliver ; Jasperneite, Jürgen: Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany : VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., 2017","bjps":"Pethig F et al. (2017) Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V."},"publication_identifier":{"isbn":[" 978-3-8163-0709-9"]},"type":"book","author":[{"full_name":"Pethig, Florian","last_name":"Pethig","first_name":"Florian"},{"first_name":"Sebastian","full_name":"Schriegel, Sebastian","last_name":"Schriegel"},{"first_name":"Alexander","last_name":"Maier","id":"11158","full_name":"Maier, Alexander"},{"first_name":"Jens","last_name":"Otto","full_name":"Otto, Jens"},{"first_name":"Stefan","full_name":"Windmann, Stefan","last_name":"Windmann","id":"58525"},{"first_name":"Björn","full_name":"Böttcher, Björn","last_name":"Böttcher"},{"full_name":"Niggemann, Oliver","id":"10876","last_name":"Niggemann","first_name":"Oliver"},{"first_name":"Jürgen","id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"title":"Industrie 4.0 Communication Guideline Based on OPC UA","main_file_link":[{"open_access":"1"}],"date_updated":"2023-03-15T13:49:54Z","related_material":{"link":[{"url":"https://www.researchgate.net/publication/316432275_Industrie-40-Kommunikation_mit_OPC_UA","relation":"other"}]}},{"publication":"Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"74222","year":2017,"abstract":[{"text":"Electrical and electronic systems have been getting raising importance for innovations in the automotive industry. Networking issues are a key factor in this process since they enable distributed control functions and user interaction bringing together nodes from different vendors. This paper analyses available and emerging network technologies for in-vehicle communication from a requirements driven perspective. It reviews successful network technologies from other application areas regarding a possible deployment in vehicular communication and distinguishes passenger car and commercial vehicle sectors as far as possible. This contribution is oriented to the OSI reference model showing the state of the art and future opportunities at the level of the several communication layers with a focus on physical layer issues and medium access protocols and including information modeling aspects.","lang":"eng"}],"_id":"4596","language":[{"iso":"eng"}],"date_created":"2021-01-28T09:57:09Z","publisher":"Springer International Publishing","place":"Lądek Zdrój, Poland","citation":{"havard":"A. Neumann, M.J. Mytych, D. Wesemann, L. Wisniewski, J. Jasperneite, Approaches for in-vehicle communication -- an analysis and outlook, in: Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings, Springer International Publishing, Lądek Zdrój, Poland, 2017.","chicago-de":"Neumann, Arne, Martin Jan Mytych, Derk Wesemann, Lukasz Wisniewski und Jürgen Jasperneite. 2017. Approaches for in-vehicle communication -- an analysis and outlook. In: Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings. Lądek Zdrój, Poland: Springer International Publishing.","ufg":"Neumann, Arne et. al. (2017): Approaches for in-vehicle communication -- an analysis and outlook, in: Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings, Lądek Zdrój, Poland.","apa":"Neumann, A., Mytych, M. J., Wesemann, D., Wisniewski, L., & Jasperneite, J. (2017). Approaches for in-vehicle communication -- an analysis and outlook. In Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings. Lądek Zdrój, Poland: Springer International Publishing.","mla":"Neumann, Arne, et al. “Approaches for In-Vehicle Communication -- an Analysis and Outlook.” Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings, Springer International Publishing, 2017.","short":"A. Neumann, M.J. Mytych, D. Wesemann, L. Wisniewski, J. Jasperneite, in: Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings, Springer International Publishing, Lądek Zdrój, Poland, 2017.","ama":"Neumann A, Mytych MJ, Wesemann D, Wisniewski L, Jasperneite J. Approaches for in-vehicle communication -- an analysis and outlook. In: Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings. Lądek Zdrój, Poland: Springer International Publishing; 2017.","van":"Neumann A, Mytych MJ, Wesemann D, Wisniewski L, Jasperneite J. Approaches for in-vehicle communication -- an analysis and outlook. In: Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings. Lądek Zdrój, Poland: Springer International Publishing; 2017.","ieee":"A. Neumann, M. J. Mytych, D. Wesemann, L. Wisniewski, and J. Jasperneite, “Approaches for in-vehicle communication -- an analysis and outlook,” in Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings, 2017.","chicago":"Neumann, Arne, Martin Jan Mytych, Derk Wesemann, Lukasz Wisniewski, and Jürgen Jasperneite. “Approaches for In-Vehicle Communication -- an Analysis and Outlook.” In Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings. Lądek Zdrój, Poland: Springer International Publishing, 2017.","din1505-2-1":"Neumann, Arne ; Mytych, Martin Jan ; Wesemann, Derk ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Approaches for in-vehicle communication -- an analysis and outlook. In: Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings. Lądek Zdrój, Poland : Springer International Publishing, 2017","bjps":"Neumann A et al. (2017) Approaches for In-Vehicle Communication -- an Analysis and Outlook. Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings. Lądek Zdrój, Poland: Springer International Publishing."},"author":[{"last_name":"Neumann","id":"61915","full_name":"Neumann, Arne","first_name":"Arne"},{"first_name":"Martin Jan","full_name":"Mytych, Martin Jan","last_name":"Mytych"},{"full_name":"Wesemann, Derk","id":"1273","last_name":"Wesemann","first_name":"Derk"},{"full_name":"Wisniewski, Lukasz","last_name":"Wisniewski","id":"1710","first_name":"Lukasz"},{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"}],"type":"conference","title":"Approaches for in-vehicle communication -- an analysis and outlook","date_updated":"2023-03-15T13:49:54Z"},{"_id":"4597","year":2017,"user_id":"74222","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","publication":"20. IFF-Wissenschaftstage in Magdeburg","date_updated":"2023-03-15T13:49:54Z","title":"Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie","author":[{"last_name":"Pethig","full_name":"Pethig, Florian","first_name":"Florian"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"type":"conference","place":"Magdeburg","citation":{"din1505-2-1":"Pethig, Florian ; Jasperneite, Jürgen: Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie. In: 20. IFF-Wissenschaftstage in Magdeburg. Magdeburg, 2017","bjps":"Pethig F and Jasperneite J (2017) Industrie 4.0-Kommunikation Mit OPC UA: Anwendungsfälle, Mehrwerte Und Migrationsstrategie. 20. IFF-Wissenschaftstage in Magdeburg. Magdeburg.","chicago":"Pethig, Florian, and Jürgen Jasperneite. “Industrie 4.0-Kommunikation Mit OPC UA: Anwendungsfälle, Mehrwerte Und Migrationsstrategie.” In 20. IFF-Wissenschaftstage in Magdeburg. Magdeburg, 2017.","ieee":"F. Pethig and J. Jasperneite, “Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie,” in 20. IFF-Wissenschaftstage in Magdeburg, 2017.","ama":"Pethig F, Jasperneite J. Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie. In: 20. IFF-Wissenschaftstage in Magdeburg. Magdeburg; 2017.","van":"Pethig F, Jasperneite J. Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie. In: 20 IFF-Wissenschaftstage in Magdeburg. Magdeburg; 2017.","apa":"Pethig, F., & Jasperneite, J. (2017). Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie. In 20. IFF-Wissenschaftstage in Magdeburg. Magdeburg.","mla":"Pethig, Florian, and Jürgen Jasperneite. “Industrie 4.0-Kommunikation Mit OPC UA: Anwendungsfälle, Mehrwerte Und Migrationsstrategie.” 20. IFF-Wissenschaftstage in Magdeburg, 2017.","short":"F. Pethig, J. Jasperneite, in: 20. IFF-Wissenschaftstage in Magdeburg, Magdeburg, 2017.","chicago-de":"Pethig, Florian und Jürgen Jasperneite. 2017. Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie. In: 20. IFF-Wissenschaftstage in Magdeburg. Magdeburg.","ufg":"Pethig, Florian/Jasperneite, Jürgen (2017): Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie, in: 20. IFF-Wissenschaftstage in Magdeburg, Magdeburg.","havard":"F. Pethig, J. Jasperneite, Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie, in: 20. IFF-Wissenschaftstage in Magdeburg, Magdeburg, 2017."},"date_created":"2021-01-28T09:58:06Z","language":[{"iso":"eng"}]},{"status":"public","publication":"26th IEEE International Symposium on Industrial Electronics (ISIE)","user_id":"74222","year":2017,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"_id":"4598","place":"Edinburgh, Scotland","citation":{"ama":"Elattar M, Friesen M, Jasperneite J. Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems. In: 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland; 2017.","van":"Elattar M, Friesen M, Jasperneite J. Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems. In: 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland; 2017.","havard":"M. Elattar, M. Friesen, J. Jasperneite, Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems, in: 26th IEEE International Symposium on Industrial Electronics (ISIE), Edinburgh, Scotland, 2017.","ieee":"M. Elattar, M. Friesen, and J. Jasperneite, “Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems,” in 26th IEEE International Symposium on Industrial Electronics (ISIE), 2017.","chicago":"Elattar, Mohammad, Maxim Friesen, and Jürgen Jasperneite. “Evaluation of Multipath Communication Protocols for Reliable Internet-Based Cyber-Physical Systems.” In 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland, 2017.","chicago-de":"Elattar, Mohammad, Maxim Friesen und Jürgen Jasperneite. 2017. Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems. In: 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland.","ufg":"Elattar, Mohammad et. al. (2017): Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems, in: 26th IEEE International Symposium on Industrial Electronics (ISIE), Edinburgh, Scotland.","apa":"Elattar, M., Friesen, M., & Jasperneite, J. (2017). Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems. In 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland.","mla":"Elattar, Mohammad, et al. “Evaluation of Multipath Communication Protocols for Reliable Internet-Based Cyber-Physical Systems.” 26th IEEE International Symposium on Industrial Electronics (ISIE), 2017.","din1505-2-1":"Elattar, Mohammad ; Friesen, Maxim ; Jasperneite, Jürgen: Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems. In: 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland, 2017","short":"M. Elattar, M. Friesen, J. Jasperneite, in: 26th IEEE International Symposium on Industrial Electronics (ISIE), Edinburgh, Scotland, 2017.","bjps":"Elattar M, Friesen M and Jasperneite J (2017) Evaluation of Multipath Communication Protocols for Reliable Internet-Based Cyber-Physical Systems. 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland."},"language":[{"iso":"eng"}],"date_created":"2021-01-28T10:00:42Z","type":"conference","author":[{"full_name":"Elattar, Mohammad","last_name":"Elattar","id":"58263","first_name":"Mohammad"},{"first_name":"Maxim","full_name":"Friesen, Maxim","id":"55044","last_name":"Friesen"},{"first_name":"Jürgen","id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"date_updated":"2023-03-15T13:49:54Z","title":"Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems"},{"date_created":"2021-01-28T10:02:00Z","language":[{"iso":"eng"}],"citation":{"van":"Elattar M, Cao T, Wendt V, Jasperneite J, Trächtler A. Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems. In: 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland; 2017.","ama":"Elattar M, Cao T, Wendt V, Jasperneite J, Trächtler A. Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems. In: 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland; 2017.","ieee":"M. Elattar, T. Cao, V. Wendt, J. Jasperneite, and A. Trächtler, “Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems,” in 26th IEEE International Symposium on Industrial Electronics (ISIE), 2017.","havard":"M. Elattar, T. Cao, V. Wendt, J. Jasperneite, A. Trächtler, Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems, in: 26th IEEE International Symposium on Industrial Electronics (ISIE), Edinburgh, Scotland, 2017.","chicago":"Elattar, Mohammad, Tong Cao, Verena Wendt, Jürgen Jasperneite, and Ansgar Trächtler. “Reliable Multipath Communication Approach for Internet-Based Cyber-Physical Systems.” In 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland, 2017.","chicago-de":"Elattar, Mohammad, Tong Cao, Verena Wendt, Jürgen Jasperneite und Ansgar Trächtler. 2017. Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems. In: 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland.","ufg":"Elattar, Mohammad et. al. (2017): Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems, in: 26th IEEE International Symposium on Industrial Electronics (ISIE), Edinburgh, Scotland.","din1505-2-1":"Elattar, Mohammad ; Cao, Tong ; Wendt, Verena ; Jasperneite, Jürgen ; Trächtler, Ansgar: Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems. In: 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland, 2017","mla":"Elattar, Mohammad, et al. “Reliable Multipath Communication Approach for Internet-Based Cyber-Physical Systems.” 26th IEEE International Symposium on Industrial Electronics (ISIE), 2017.","apa":"Elattar, M., Cao, T., Wendt, V., Jasperneite, J., & Trächtler, A. (2017). Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems. In 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland.","short":"M. Elattar, T. Cao, V. Wendt, J. Jasperneite, A. Trächtler, in: 26th IEEE International Symposium on Industrial Electronics (ISIE), Edinburgh, Scotland, 2017.","bjps":"Elattar M et al. (2017) Reliable Multipath Communication Approach for Internet-Based Cyber-Physical Systems. 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland."},"place":"Edinburgh, Scotland","type":"conference","author":[{"first_name":"Mohammad","last_name":"Elattar","id":"58263","full_name":"Elattar, Mohammad"},{"first_name":"Tong","last_name":"Cao","full_name":"Cao, Tong"},{"first_name":"Verena","full_name":"Wendt, Verena","last_name":"Wendt"},{"full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899","first_name":"Jürgen"},{"last_name":"Trächtler","full_name":"Trächtler, Ansgar","first_name":"Ansgar"}],"title":"Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems","date_updated":"2023-03-15T13:49:54Z","publication":"26th IEEE International Symposium on Industrial Electronics (ISIE)","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"74222","year":2017,"_id":"4599"},{"title":"Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service ","date_updated":"2023-03-15T13:49:54Z","type":"conference","author":[{"last_name":"Ali Khan","full_name":"Ali Khan, Waqas","first_name":"Waqas"},{"first_name":"Lukasz","id":"1710","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz"},{"first_name":"Dorota","full_name":"Lang, Dorota","id":"68941","last_name":"Lang"},{"first_name":"Jürgen","id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"date_created":"2021-01-28T10:03:05Z","language":[{"iso":"eng"}],"citation":{"ufg":"Ali Khan, Waqas et. al. (2017): Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service , in: 26th IEEE International Symposium on Industrial Electronics (ISIE 2017), Edinburgh, Scotland, UK.","chicago-de":"Ali Khan, Waqas, Lukasz Wisniewski, Dorota Lang und Jürgen Jasperneite. 2017. Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service . In: 26th IEEE International Symposium on Industrial Electronics (ISIE 2017). Edinburgh, Scotland, UK.","chicago":"Ali Khan, Waqas, Lukasz Wisniewski, Dorota Lang, and Jürgen Jasperneite. “Analysis of the Requirements for Offering Industrie 4.0 Applications as a Cloud Service .” In 26th IEEE International Symposium on Industrial Electronics (ISIE 2017). Edinburgh, Scotland, UK, 2017.","short":"W. Ali Khan, L. Wisniewski, D. Lang, J. Jasperneite, in: 26th IEEE International Symposium on Industrial Electronics (ISIE 2017), Edinburgh, Scotland, UK, 2017.","bjps":"Ali Khan W et al. (2017) Analysis of the Requirements for Offering Industrie 4.0 Applications as a Cloud Service . 26th IEEE International Symposium on Industrial Electronics (ISIE 2017). Edinburgh, Scotland, UK.","mla":"Ali Khan, Waqas, et al. “Analysis of the Requirements for Offering Industrie 4.0 Applications as a Cloud Service .” 26th IEEE International Symposium on Industrial Electronics (ISIE 2017), 2017.","apa":"Ali Khan, W., Wisniewski, L., Lang, D., & Jasperneite, J. (2017). Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service . In 26th IEEE International Symposium on Industrial Electronics (ISIE 2017). Edinburgh, Scotland, UK.","din1505-2-1":"Ali Khan, Waqas ; Wisniewski, Lukasz ; Lang, Dorota ; Jasperneite, Jürgen: Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service . In: 26th IEEE International Symposium on Industrial Electronics (ISIE 2017). Edinburgh, Scotland, UK, 2017","ama":"Ali Khan W, Wisniewski L, Lang D, Jasperneite J. Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service . In: 26th IEEE International Symposium on Industrial Electronics (ISIE 2017). Edinburgh, Scotland, UK; 2017.","van":"Ali Khan W, Wisniewski L, Lang D, Jasperneite J. Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service . In: 26th IEEE International Symposium on Industrial Electronics (ISIE 2017). Edinburgh, Scotland, UK; 2017.","havard":"W. Ali Khan, L. Wisniewski, D. Lang, J. Jasperneite, Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service , in: 26th IEEE International Symposium on Industrial Electronics (ISIE 2017), Edinburgh, Scotland, UK, 2017.","ieee":"W. Ali Khan, L. Wisniewski, D. Lang, and J. Jasperneite, “Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service ,” in 26th IEEE International Symposium on Industrial Electronics (ISIE 2017), 2017."},"place":"Edinburgh, Scotland, UK","_id":"4600","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"74222","year":2017,"publication":"26th IEEE International Symposium on Industrial Electronics (ISIE 2017)","status":"public"},{"_id":"4601","page":"1","year":2017,"user_id":"74222","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","publication":"Automation 2017","date_updated":"2023-03-15T13:49:54Z","title":"Security Concept for a Cloud-based Automation Service","type":"conference","author":[{"full_name":"Ehrlich, Marco","last_name":"Ehrlich","id":"61562","first_name":"Marco"},{"id":"1486","last_name":"Trsek","full_name":"Trsek, Henning","first_name":"Henning"},{"full_name":"Lang, Dorota","id":"68941","last_name":"Lang","first_name":"Dorota"},{"full_name":"Wisniewski, Lukasz","last_name":"Wisniewski","id":"1710","first_name":"Lukasz"},{"full_name":"Wendt, Verena","last_name":"Wendt","first_name":"Verena"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite"}],"place":"Baden Baden, Germany","citation":{"chicago-de":"Ehrlich, Marco, Henning Trsek, Dorota Lang, Lukasz Wisniewski, Verena Wendt und Jürgen Jasperneite. 2017. Security Concept for a Cloud-based Automation Service. In: Automation 2017, 1. Baden Baden, Germany: VDI.","ufg":"Ehrlich, Marco et. al. (2017): Security Concept for a Cloud-based Automation Service, in: Automation 2017, Baden Baden, Germany, S. 1.","mla":"Ehrlich, Marco, et al. “Security Concept for a Cloud-Based Automation Service.” Automation 2017, VDI, 2017, p. 1.","apa":"Ehrlich, M., Trsek, H., Lang, D., Wisniewski, L., Wendt, V., & Jasperneite, J. (2017). Security Concept for a Cloud-based Automation Service. In Automation 2017 (p. 1). Baden Baden, Germany: VDI.","short":"M. Ehrlich, H. Trsek, D. Lang, L. Wisniewski, V. Wendt, J. Jasperneite, in: Automation 2017, VDI, Baden Baden, Germany, 2017, p. 1.","havard":"M. Ehrlich, H. Trsek, D. Lang, L. Wisniewski, V. Wendt, J. Jasperneite, Security Concept for a Cloud-based Automation Service, in: Automation 2017, VDI, Baden Baden, Germany, 2017: p. 1.","chicago":"Ehrlich, Marco, Henning Trsek, Dorota Lang, Lukasz Wisniewski, Verena Wendt, and Jürgen Jasperneite. “Security Concept for a Cloud-Based Automation Service.” In Automation 2017, 1. Baden Baden, Germany: VDI, 2017.","din1505-2-1":"Ehrlich, Marco ; Trsek, Henning ; Lang, Dorota ; Wisniewski, Lukasz ; Wendt, Verena ; Jasperneite, Jürgen: Security Concept for a Cloud-based Automation Service. In: Automation 2017. Baden Baden, Germany : VDI, 2017, S. 1","bjps":"Ehrlich M et al. (2017) Security Concept for a Cloud-Based Automation Service. Automation 2017. Baden Baden, Germany: VDI, p. 1.","van":"Ehrlich M, Trsek H, Lang D, Wisniewski L, Wendt V, Jasperneite J. Security Concept for a Cloud-based Automation Service. In: Automation 2017. Baden Baden, Germany: VDI; 2017. p. 1.","ama":"Ehrlich M, Trsek H, Lang D, Wisniewski L, Wendt V, Jasperneite J. Security Concept for a Cloud-based Automation Service. In: Automation 2017. Baden Baden, Germany: VDI; 2017:1.","ieee":"M. Ehrlich, H. Trsek, D. Lang, L. Wisniewski, V. Wendt, and J. Jasperneite, “Security Concept for a Cloud-based Automation Service,” in Automation 2017, 2017, p. 1."},"language":[{"iso":"eng"}],"publisher":"VDI","date_created":"2021-01-28T10:04:08Z"},{"title":"Open and Secure: Amending the Security of the BSI Smart Metering Infrastructure to Smart Home Applications via the Smart Meter Gateway","date_updated":"2023-03-15T13:49:54Z","author":[{"last_name":"Freudenmann","full_name":"Freudenmann, Christian","first_name":"Christian"},{"last_name":"Henneke","id":"52007","full_name":"Henneke, Dominik","first_name":"Dominik"},{"first_name":"Christian","full_name":"Kudera, Christian","last_name":"Kudera"},{"last_name":"Kammerstetter","full_name":"Kammerstetter, Markus","first_name":"Markus"},{"id":"1710","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz","first_name":"Lukasz"},{"full_name":"Raquet, Christoph","last_name":"Raquet","first_name":"Christoph"},{"last_name":"Kastner","full_name":"Kastner, Wolfgang","first_name":"Wolfgang"},{"full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite","first_name":"Jürgen"}],"type":"conference","date_created":"2021-01-28T10:06:05Z","publisher":"Springer","language":[{"iso":"eng"}],"citation":{"havard":"C. Freudenmann, D. Henneke, C. Kudera, M. Kammerstetter, L. Wisniewski, C. Raquet, W. Kastner, J. Jasperneite, Open and Secure: Amending the Security of the BSI Smart Metering Infrastructure to Smart Home Applications via the Smart Meter Gateway, in: Conference: Smart Energy Research at the Crossroads of Engineering, Economics and Computer Science 2017, Springer, Essen, Germany, 2017: p. 12.","ufg":"Freudenmann, Christian et. al. (2017): Open and Secure: Amending the Security of the BSI Smart Metering Infrastructure to Smart Home Applications via the Smart Meter Gateway, in: Conference: Smart Energy Research at the crossroads of Engineering, Economics and Computer Science 2017, Essen, Germany, S. 12.","chicago-de":"Freudenmann, Christian, Dominik Henneke, Christian Kudera, Markus Kammerstetter, Lukasz Wisniewski, Christoph Raquet, Wolfgang Kastner und Jürgen Jasperneite. 2017. Open and Secure: Amending the Security of the BSI Smart Metering Infrastructure to Smart Home Applications via the Smart Meter Gateway. In: Conference: Smart Energy Research at the crossroads of Engineering, Economics and Computer Science 2017, 12. Essen, Germany: Springer.","short":"C. Freudenmann, D. Henneke, C. Kudera, M. Kammerstetter, L. Wisniewski, C. Raquet, W. Kastner, J. Jasperneite, in: Conference: Smart Energy Research at the Crossroads of Engineering, Economics and Computer Science 2017, Springer, Essen, Germany, 2017, p. 12.","apa":"Freudenmann, C., Henneke, D., Kudera, C., Kammerstetter, M., Wisniewski, L., Raquet, C., … Jasperneite, J. (2017). Open and Secure: Amending the Security of the BSI Smart Metering Infrastructure to Smart Home Applications via the Smart Meter Gateway. In Conference: Smart Energy Research at the crossroads of Engineering, Economics and Computer Science 2017 (p. 12). Essen, Germany: Springer.","mla":"Freudenmann, Christian, et al. “Open and Secure: Amending the Security of the BSI Smart Metering Infrastructure to Smart Home Applications via the Smart Meter Gateway.” Conference: Smart Energy Research at the Crossroads of Engineering, Economics and Computer Science 2017, Springer, 2017, p. 12.","ama":"Freudenmann C, Henneke D, Kudera C, et al. Open and Secure: Amending the Security of the BSI Smart Metering Infrastructure to Smart Home Applications via the Smart Meter Gateway. In: Conference: Smart Energy Research at the Crossroads of Engineering, Economics and Computer Science 2017. Essen, Germany: Springer; 2017:12.","van":"Freudenmann C, Henneke D, Kudera C, Kammerstetter M, Wisniewski L, Raquet C, et al. Open and Secure: Amending the Security of the BSI Smart Metering Infrastructure to Smart Home Applications via the Smart Meter Gateway. In: Conference: Smart Energy Research at the crossroads of Engineering, Economics and Computer Science 2017. Essen, Germany: Springer; 2017. p. 12.","ieee":"C. Freudenmann et al., “Open and Secure: Amending the Security of the BSI Smart Metering Infrastructure to Smart Home Applications via the Smart Meter Gateway,” in Conference: Smart Energy Research at the crossroads of Engineering, Economics and Computer Science 2017, 2017, p. 12.","chicago":"Freudenmann, Christian, Dominik Henneke, Christian Kudera, Markus Kammerstetter, Lukasz Wisniewski, Christoph Raquet, Wolfgang Kastner, and Jürgen Jasperneite. “Open and Secure: Amending the Security of the BSI Smart Metering Infrastructure to Smart Home Applications via the Smart Meter Gateway.” In Conference: Smart Energy Research at the Crossroads of Engineering, Economics and Computer Science 2017, 12. Essen, Germany: Springer, 2017.","bjps":"Freudenmann C et al. (2017) Open and Secure: Amending the Security of the BSI Smart Metering Infrastructure to Smart Home Applications via the Smart Meter Gateway. Conference: Smart Energy Research at the Crossroads of Engineering, Economics and Computer Science 2017. Essen, Germany: Springer, p. 12.","din1505-2-1":"Freudenmann, Christian ; Henneke, Dominik ; Kudera, Christian ; Kammerstetter, Markus ; Wisniewski, Lukasz ; Raquet, Christoph ; Kastner, Wolfgang ; Jasperneite, Jürgen: Open and Secure: Amending the Security of the BSI Smart Metering Infrastructure to Smart Home Applications via the Smart Meter Gateway. In: Conference: Smart Energy Research at the crossroads of Engineering, Economics and Computer Science 2017. Essen, Germany : Springer, 2017, S. 12"},"place":"Essen, Germany","_id":"4602","page":"12","abstract":[{"text":"This paper describes an implementation to enable interaction between smart home solutions and Smart Meter Gateways (SMGWs). This is conducted in the example of the approach of the AnyPLACE project to interconnect openHAB with the HAN interface of the SMGW. Furthermore, security issues in the combination of those two realms are addressed, answered and tested so that in addition to the open character of the solution, it is still secure.","lang":"eng"}],"department":[{"_id":"DEP5019"}],"user_id":"74222","year":2017,"publication":"Conference: Smart Energy Research at the crossroads of Engineering, Economics and Computer Science 2017","status":"public"},{"publication":"13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (best WIP paper award)","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2017,"user_id":"74222","abstract":[{"lang":"eng","text":"Nowadays, industrial networks are characterized by complex architectures of hybrid, wired and wireless segments, combining automation and information technology (IT). Their operation is supported by network management facilities. Network monitoring is a basis for management as it provides the necessary status information. This paper presents an approach to apply a monitoring concept coming from the IT domain for an industrial wireless network as a step towards a uniform monitoring and management of heterogeneous networks."}],"_id":"4603","date_created":"2021-01-28T10:10:20Z","language":[{"iso":"eng"}],"place":"Trondheim, Norway","citation":{"ama":"Neumann A, Ehrlich M, Wisniewski L, Jasperneite J. Towards monitoring of hybrid industrial networks. In: 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (Best WIP Paper Award). Trondheim, Norway; 2017.","van":"Neumann A, Ehrlich M, Wisniewski L, Jasperneite J. Towards monitoring of hybrid industrial networks. In: 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31052017- 02062017, (best WIP paper award). Trondheim, Norway; 2017.","havard":"A. Neumann, M. Ehrlich, L. Wisniewski, J. Jasperneite, Towards monitoring of hybrid industrial networks, in: 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (Best WIP Paper Award), Trondheim, Norway, 2017.","ieee":"A. Neumann, M. Ehrlich, L. Wisniewski, and J. Jasperneite, “Towards monitoring of hybrid industrial networks,” in 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (best WIP paper award), 2017.","ufg":"Neumann, Arne et. al. (2017): Towards monitoring of hybrid industrial networks, in: 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (best WIP paper award), Trondheim, Norway.","chicago":"Neumann, Arne, Marco Ehrlich, Lukasz Wisniewski, and Jürgen Jasperneite. “Towards Monitoring of Hybrid Industrial Networks.” In 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (Best WIP Paper Award). Trondheim, Norway, 2017.","chicago-de":"Neumann, Arne, Marco Ehrlich, Lukasz Wisniewski und Jürgen Jasperneite. 2017. Towards monitoring of hybrid industrial networks. In: 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (best WIP paper award). Trondheim, Norway.","bjps":"Neumann A et al. (2017) Towards Monitoring of Hybrid Industrial Networks. 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (Best WIP Paper Award). Trondheim, Norway.","short":"A. Neumann, M. Ehrlich, L. Wisniewski, J. Jasperneite, in: 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (Best WIP Paper Award), Trondheim, Norway, 2017.","apa":"Neumann, A., Ehrlich, M., Wisniewski, L., & Jasperneite, J. (2017). Towards monitoring of hybrid industrial networks. In 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (best WIP paper award). Trondheim, Norway.","mla":"Neumann, Arne, et al. “Towards Monitoring of Hybrid Industrial Networks.” 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (Best WIP Paper Award), 2017.","din1505-2-1":"Neumann, Arne ; Ehrlich, Marco ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Towards monitoring of hybrid industrial networks. In: 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (best WIP paper award). Trondheim, Norway, 2017"},"author":[{"last_name":"Neumann","id":"61915","full_name":"Neumann, Arne","first_name":"Arne"},{"full_name":"Ehrlich, Marco","id":"61562","last_name":"Ehrlich","first_name":"Marco"},{"first_name":"Lukasz","id":"1710","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz"},{"id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"type":"conference","title":"Towards monitoring of hybrid industrial networks","date_updated":"2023-03-15T13:49:54Z"},{"publication":"IEEE Industrial Electronics magazine","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2017,"user_id":"74222","_id":"4604","date_created":"2021-01-28T10:11:13Z","language":[{"iso":"eng"}],"publisher":"IEEE","citation":{"bjps":"Wollschläger M, Sauter T and Jasperneite J (2017) The Future of Industrial Communication. IEEE Industrial Electronics Magazine. IEEE.","din1505-2-1":"Wollschläger, Martin ; Sauter, Thilo ; Jasperneite, Jürgen: The Future of Industrial Communication. In: IEEE Industrial Electronics magazine : IEEE, 2017","chicago":"Wollschläger, Martin, Thilo Sauter, and Jürgen Jasperneite. “The Future of Industrial Communication.” In IEEE Industrial Electronics Magazine. IEEE, 2017.","ieee":"M. Wollschläger, T. Sauter, and J. Jasperneite, “The Future of Industrial Communication,” in IEEE Industrial Electronics magazine, 2017.","ama":"Wollschläger M, Sauter T, Jasperneite J. The Future of Industrial Communication. In: IEEE Industrial Electronics Magazine. IEEE; 2017.","van":"Wollschläger M, Sauter T, Jasperneite J. The Future of Industrial Communication. In: IEEE Industrial Electronics magazine. IEEE; 2017.","short":"M. Wollschläger, T. Sauter, J. Jasperneite, in: IEEE Industrial Electronics Magazine, IEEE, 2017.","apa":"Wollschläger, M., Sauter, T., & Jasperneite, J. (2017). The Future of Industrial Communication. In IEEE Industrial Electronics magazine. IEEE.","mla":"Wollschläger, Martin, et al. “The Future of Industrial Communication.” IEEE Industrial Electronics Magazine, IEEE, 2017.","ufg":"Wollschläger, Martin et. al. (2017): The Future of Industrial Communication, in: IEEE Industrial Electronics magazine.","chicago-de":"Wollschläger, Martin, Thilo Sauter und Jürgen Jasperneite. 2017. The Future of Industrial Communication. In: IEEE Industrial Electronics magazine. IEEE.","havard":"M. Wollschläger, T. Sauter, J. Jasperneite, The Future of Industrial Communication, in: IEEE Industrial Electronics Magazine, IEEE, 2017."},"type":"conference","author":[{"full_name":"Wollschläger, Martin","last_name":"Wollschläger","first_name":"Martin"},{"first_name":"Thilo","last_name":"Sauter","full_name":"Sauter, Thilo"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite"}],"title":"The Future of Industrial Communication","date_updated":"2023-03-15T13:49:54Z"},{"_id":"4789","department":[{"_id":"DEP5023"}],"user_id":"68554","year":2017,"publication":"3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS)","status":"public","title":"Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems","date_updated":"2023-03-15T13:49:55Z","type":"conference","author":[{"first_name":"Andreas","id":"58885","last_name":"Bunte","full_name":"Bunte, Andreas"},{"full_name":"Li, Peng","id":"58937","last_name":"Li","first_name":"Peng"},{"last_name":"Niggemann","id":"10876","full_name":"Niggemann, Oliver","first_name":"Oliver"}],"date_created":"2021-02-02T08:24:27Z","language":[{"iso":"eng"}],"citation":{"chicago-de":"Bunte, Andreas, Peng Li und Oliver Niggemann. 2017. Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. In: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS).","chicago":"Bunte, Andreas, Peng Li, and Oliver Niggemann. “Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems.” In 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017.","ufg":"Bunte, Andreas et. al. (2017): Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems, in: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS).","din1505-2-1":"Bunte, Andreas ; Li, Peng ; Niggemann, Oliver: Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. In: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017","mla":"Bunte, Andreas, et al. “Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems.” 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017.","apa":"Bunte, A., Li, P., & Niggemann, O. (2017). Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. In 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS).","short":"A. Bunte, P. Li, O. Niggemann, in: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017.","bjps":"Bunte A, Li P and Niggemann O (2017) Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS).","van":"Bunte A, Li P, Niggemann O. Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. In: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 40 (ML4CPS). 2017.","ama":"Bunte A, Li P, Niggemann O. Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. In: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS). ; 2017.","ieee":"A. Bunte, P. Li, and O. Niggemann, “Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems,” in 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017.","havard":"A. Bunte, P. Li, O. Niggemann, Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems, in: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017."}},{"_id":"4906","user_id":"74004","year":2017,"department":[{"_id":"DEP6020"}],"status":"public","alternative_title":["Verbundabschlussbericht zum Innovationsprojekt \"itsowl-IASI\""],"date_updated":"2023-03-15T13:49:56Z","title":"Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik","type":"report_science","author":[{"first_name":"Holger","id":"1693","last_name":"Borcherding","full_name":"Borcherding, Holger"},{"first_name":"Johann","id":"42114","last_name":"Austermann","full_name":"Austermann, Johann"},{"first_name":"Raphael","full_name":"Otte, Raphael","id":"51830","last_name":"Otte"},{"first_name":"Stefan","id":"58525","last_name":"Windmann","full_name":"Windmann, Stefan"},{"first_name":"Markus","last_name":"Köster","full_name":"Köster, Markus"},{"first_name":"Heiko","full_name":"Stichweh, Heiko","last_name":"Stichweh"},{"full_name":"Grabs, Volker","last_name":"Grabs","first_name":"Volker"},{"full_name":"Ehlich, Martin","last_name":"Ehlich","first_name":"Martin"},{"first_name":"Thorsten","last_name":"Hohnsbein","full_name":"Hohnsbein, Thorsten"}],"report_number":"FKZ 02PQ2140","place":"Lemgo","citation":{"bjps":"Borcherding H et al. (2017) Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. Lemgo: TIB Hannover.","din1505-2-1":"Borcherding, Holger ; Austermann, Johann ; Otte, Raphael ; Windmann, Stefan ; Köster, Markus ; Stichweh, Heiko ; Grabs, Volker ; Ehlich, Martin ; u. a.: Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. Lemgo : TIB Hannover, 2017","chicago":"Borcherding, Holger, Johann Austermann, Raphael Otte, Stefan Windmann, Markus Köster, Heiko Stichweh, Volker Grabs, Martin Ehlich, and Thorsten Hohnsbein. Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. Lemgo: TIB Hannover, 2017.","ieee":"H. Borcherding et al., Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. Lemgo: TIB Hannover, 2017.","ama":"Borcherding H, Austermann J, Otte R, et al. Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. Lemgo: TIB Hannover; 2017.","van":"Borcherding H, Austermann J, Otte R, Windmann S, Köster M, Stichweh H, et al. Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. Lemgo: TIB Hannover; 2017.","short":"H. Borcherding, J. Austermann, R. Otte, S. Windmann, M. Köster, H. Stichweh, V. Grabs, M. Ehlich, T. Hohnsbein, Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik, TIB Hannover, Lemgo, 2017.","mla":"Borcherding, Holger, et al. Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. TIB Hannover, 2017.","apa":"Borcherding, H., Austermann, J., Otte, R., Windmann, S., Köster, M., Stichweh, H., … Hohnsbein, T. (2017). Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. Lemgo: TIB Hannover.","ufg":"Borcherding, Holger et. al. (2017): Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik, Lemgo.","chicago-de":"Borcherding, Holger, Johann Austermann, Raphael Otte, Stefan Windmann, Markus Köster, Heiko Stichweh, Volker Grabs, Martin Ehlich und Thorsten Hohnsbein. 2017. Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. Lemgo: TIB Hannover.","havard":"H. Borcherding, J. Austermann, R. Otte, S. Windmann, M. Köster, H. Stichweh, V. Grabs, M. Ehlich, T. Hohnsbein, Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik, TIB Hannover, Lemgo, 2017."},"date_created":"2021-02-08T13:10:43Z","publisher":"TIB Hannover","language":[{"iso":"ger"}]},{"_id":"4907","department":[{"_id":"DEP6020"}],"year":2017,"user_id":"64800","status":"public","title":"Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik","date_updated":"2023-03-15T13:49:56Z","report_number":"FKZ 13FH011IN4","author":[{"full_name":"Borcherding, Holger","last_name":"Borcherding","id":"1693","first_name":"Holger"},{"first_name":"Benjamin","full_name":"Jerwan, Benjamin","id":"62157","last_name":"Jerwan"}],"type":"report_science","date_created":"2021-02-08T13:12:38Z","publisher":"TIB Hannover","language":[{"iso":"eng"}],"citation":{"van":"Borcherding H, Jerwan B. Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik. Lemgo: TIB Hannover; 2017.","ama":"Borcherding H, Jerwan B. Abschlussbericht Zum Projekt MintEA, Miniaturisierung Und Hochintegration von Elektronik in Energie- Und Antriebstechnik. Lemgo: TIB Hannover; 2017.","ieee":"H. Borcherding and B. Jerwan, Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik. Lemgo: TIB Hannover, 2017.","chicago":"Borcherding, Holger, and Benjamin Jerwan. Abschlussbericht Zum Projekt MintEA, Miniaturisierung Und Hochintegration von Elektronik in Energie- Und Antriebstechnik. Lemgo: TIB Hannover, 2017.","bjps":"Borcherding H and Jerwan B (2017) Abschlussbericht Zum Projekt MintEA, Miniaturisierung Und Hochintegration von Elektronik in Energie- Und Antriebstechnik. Lemgo: TIB Hannover.","din1505-2-1":"Borcherding, Holger ; Jerwan, Benjamin: Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik. Lemgo : TIB Hannover, 2017","havard":"H. Borcherding, B. Jerwan, Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik, TIB Hannover, Lemgo, 2017.","ufg":"Borcherding, Holger/Jerwan, Benjamin (2017): Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik, Lemgo.","chicago-de":"Borcherding, Holger und Benjamin Jerwan. 2017. Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik. Lemgo: TIB Hannover.","short":"H. Borcherding, B. Jerwan, Abschlussbericht Zum Projekt MintEA, Miniaturisierung Und Hochintegration von Elektronik in Energie- Und Antriebstechnik, TIB Hannover, Lemgo, 2017.","apa":"Borcherding, H., & Jerwan, B. (2017). Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik. Lemgo: TIB Hannover.","mla":"Borcherding, Holger, and Benjamin Jerwan. Abschlussbericht Zum Projekt MintEA, Miniaturisierung Und Hochintegration von Elektronik in Energie- Und Antriebstechnik. TIB Hannover, 2017."},"place":"Lemgo"},{"_id":"4915","user_id":"74004","year":2017,"department":[{"_id":"DEP6020"}],"status":"public","date_updated":"2023-03-15T13:49:56Z","title":"Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA)","type":"report_science","author":[{"first_name":"Holger","full_name":"Borcherding, Holger","last_name":"Borcherding","id":"1693"},{"first_name":"D.","last_name":"Steup","full_name":"Steup, D."},{"first_name":"M.","full_name":"Therolf, M.","last_name":"Therolf"},{"last_name":"Tolksdorf","full_name":"Tolksdorf, A.","first_name":"A."}],"place":"Lemgo","citation":{"mla":"Borcherding, Holger, et al. Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). TIB Hannover, 2017.","apa":"Borcherding, H., Steup, D., Therolf, M., & Tolksdorf, A. (2017). Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). Lemgo: TIB Hannover.","din1505-2-1":"Borcherding, Holger ; Steup, D. ; Therolf, M. ; Tolksdorf, A.: Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). Lemgo : TIB Hannover, 2017","short":"H. Borcherding, D. Steup, M. Therolf, A. Tolksdorf, Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA), TIB Hannover, Lemgo, 2017.","bjps":"Borcherding H et al. (2017) Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). Lemgo: TIB Hannover.","chicago-de":"Borcherding, Holger, D. Steup, M. Therolf und A. Tolksdorf. 2017. Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). Lemgo: TIB Hannover.","chicago":"Borcherding, Holger, D. Steup, M. Therolf, and A. Tolksdorf. Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). Lemgo: TIB Hannover, 2017.","ufg":"Borcherding, Holger et. al. (2017): Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA), Lemgo.","havard":"H. Borcherding, D. Steup, M. Therolf, A. Tolksdorf, Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA), TIB Hannover, Lemgo, 2017.","ieee":"H. Borcherding, D. Steup, M. Therolf, and A. Tolksdorf, Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). Lemgo: TIB Hannover, 2017.","ama":"Borcherding H, Steup D, Therolf M, Tolksdorf A. Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). Lemgo: TIB Hannover; 2017.","van":"Borcherding H, Steup D, Therolf M, Tolksdorf A. Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). Lemgo: TIB Hannover; 2017."},"date_created":"2021-02-09T09:12:46Z","language":[{"iso":"ger"}],"publisher":"TIB Hannover"},{"type":"report_science","author":[{"first_name":"Jan","last_name":"Wettlaufer","full_name":"Wettlaufer, Jan"},{"full_name":"Borcherding, Holger","id":"1693","last_name":"Borcherding","first_name":"Holger"},{"full_name":"Hohnsbein, Thorsten","last_name":"Hohnsbein","first_name":"Thorsten"}],"report_number":"Reportnr. 16EMO0033, 01150513","citation":{"havard":"J. Wettlaufer, H. Borcherding, T. Hohnsbein, InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: “Integration der störungsarmen Leistungselektronik in Industrieumrichter,” TIB Hannover, Lemgo, 2017.","chicago-de":"Wettlaufer, Jan, Holger Borcherding und Thorsten Hohnsbein. 2017. InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: „Integration der störungsarmen Leistungselektronik in Industrieumrichter“. Lemgo: TIB Hannover.","ufg":"Wettlaufer, Jan et. al. (2017): InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: „Integration der störungsarmen Leistungselektronik in Industrieumrichter“, Lemgo.","apa":"Wettlaufer, J., Borcherding, H., & Hohnsbein, T. (2017). InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: “Integration der störungsarmen Leistungselektronik in Industrieumrichter.” Lemgo: TIB Hannover.","mla":"Wettlaufer, Jan, et al. InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: “Integration der störungsarmen Leistungselektronik in Industrieumrichter.” TIB Hannover, 2017.","short":"J. Wettlaufer, H. Borcherding, T. Hohnsbein, InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: “Integration der störungsarmen Leistungselektronik in Industrieumrichter,” TIB Hannover, Lemgo, 2017.","ama":"Wettlaufer J, Borcherding H, Hohnsbein T. InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: “Integration der störungsarmen Leistungselektronik in Industrieumrichter.” Lemgo: TIB Hannover; 2017.","van":"Wettlaufer J, Borcherding H, Hohnsbein T. InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: “Integration der störungsarmen Leistungselektronik in Industrieumrichter.” Lemgo: TIB Hannover; 2017.","ieee":"J. Wettlaufer, H. Borcherding, and T. Hohnsbein, InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: “Integration der störungsarmen Leistungselektronik in Industrieumrichter.” Lemgo: TIB Hannover, 2017.","chicago":"Wettlaufer, Jan, Holger Borcherding, and Thorsten Hohnsbein. InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: “Integration der störungsarmen Leistungselektronik in Industrieumrichter.” Lemgo: TIB Hannover, 2017.","din1505-2-1":"Wettlaufer, Jan ; Borcherding, Holger ; Hohnsbein, Thorsten: InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: „Integration der störungsarmen Leistungselektronik in Industrieumrichter“. Lemgo : TIB Hannover, 2017","bjps":"Wettlaufer J, Borcherding H and Hohnsbein T (2017) InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: ‘Integration der störungsarmen Leistungselektronik in Industrieumrichter’. Lemgo: TIB Hannover."},"place":"Lemgo","language":[{"iso":"ger"}],"date_created":"2021-02-09T09:15:29Z","publisher":"TIB Hannover","date_updated":"2023-03-15T13:49:56Z","title":"InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: \"Integration der störungsarmen Leistungselektronik in Industrieumrichter\"","user_id":"74004","year":2017,"department":[{"_id":"DEP6020"}],"status":"public","_id":"4916"},{"status":"public","year":2017,"user_id":"74004","department":[{"_id":"DEP6020"}],"_id":"4917","citation":{"van":"Bolte S, Cherkerzova R, Kaiser M, Peters A, Spanier P, Böcker J, et al. Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. Lemgo: TIB Hannover; 2017.","ama":"Bolte S, Cherkerzova R, Kaiser M, et al. Schlussbericht Zum Verbundprojekt: Energieeffizienz in Intelligenten Technischen Systemen (Itsowl-EE) : Der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. Lemgo: TIB Hannover; 2017.","ieee":"S. Bolte et al., Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. Lemgo: TIB Hannover, 2017.","havard":"S. Bolte, R. Cherkerzova, M. Kaiser, A. Peters, P. Spanier, J. Böcker, H. Borcherding, Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld, TIB Hannover, Lemgo, 2017.","ufg":"Bolte, S. et. al. (2017): Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld, Lemgo.","chicago":"Bolte, S., R. Cherkerzova, Mario Kaiser, A. Peters, Patrick Spanier, J. Böcker, and Holger Borcherding. Schlussbericht Zum Verbundprojekt: Energieeffizienz in Intelligenten Technischen Systemen (Itsowl-EE) : Der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. Lemgo: TIB Hannover, 2017.","chicago-de":"Bolte, S., R. Cherkerzova, Mario Kaiser, A. Peters, Patrick Spanier, J. Böcker und Holger Borcherding. 2017. Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. Lemgo: TIB Hannover.","short":"S. Bolte, R. Cherkerzova, M. Kaiser, A. Peters, P. Spanier, J. Böcker, H. Borcherding, Schlussbericht Zum Verbundprojekt: Energieeffizienz in Intelligenten Technischen Systemen (Itsowl-EE) : Der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld, TIB Hannover, Lemgo, 2017.","bjps":"Bolte S et al. (2017) Schlussbericht Zum Verbundprojekt: Energieeffizienz in Intelligenten Technischen Systemen (Itsowl-EE) : Der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. Lemgo: TIB Hannover.","din1505-2-1":"Bolte, S. ; Cherkerzova, R. ; Kaiser, Mario ; Peters, A. ; Spanier, Patrick ; Böcker, J. ; Borcherding, Holger: Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. Lemgo : TIB Hannover, 2017","mla":"Bolte, S., et al. Schlussbericht Zum Verbundprojekt: Energieeffizienz in Intelligenten Technischen Systemen (Itsowl-EE) : Der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. TIB Hannover, 2017.","apa":"Bolte, S., Cherkerzova, R., Kaiser, M., Peters, A., Spanier, P., Böcker, J., & Borcherding, H. (2017). Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. Lemgo: TIB Hannover."},"place":"Lemgo","language":[{"iso":"eng"}],"publisher":"TIB Hannover","date_created":"2021-02-09T09:19:50Z","type":"report_science","author":[{"first_name":"S.","full_name":"Bolte, S.","last_name":"Bolte"},{"first_name":"R. ","full_name":"Cherkerzova, R. ","last_name":"Cherkerzova"},{"last_name":"Kaiser","id":"73362","full_name":"Kaiser, Mario","first_name":"Mario"},{"first_name":"A. ","last_name":"Peters","full_name":"Peters, A. "},{"full_name":"Spanier, Patrick","id":"43516","last_name":"Spanier","first_name":"Patrick"},{"full_name":"Böcker, J.","last_name":"Böcker","first_name":"J."},{"first_name":"Holger","full_name":"Borcherding, Holger","last_name":"Borcherding","id":"1693"}],"report_number":"FKZ. 02PQ1030-02PQ1033","date_updated":"2023-03-15T13:49:56Z","title":"Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld"},{"status":"public","publication":"Wat. Sci. Tech.","user_id":"74004","year":2017,"department":[{"_id":"DEP8020"}],"page":"2056-2063","_id":"5054","citation":{"bjps":"Fettig J, Pick V and Liebe H (2017) Particle Separation from Road Runoff by a Decentralised Lamella System – Laboratory Tests and Experiences in the Field. Wat. Sci. Tech. 75, 2056–2063.","din1505-2-1":"Fettig, Joachim ; Pick, Volker ; Liebe, H.: Particle separation from road runoff by a decentralised lamella system – laboratory tests and experiences in the field. In: Wat. Sci. Tech. Bd. 75 (2017), Nr. 9, S. 2056–2063","chicago":"Fettig, Joachim, Volker Pick, and H. Liebe. “Particle Separation from Road Runoff by a Decentralised Lamella System – Laboratory Tests and Experiences in the Field.” Wat. Sci. Tech. 75, no. 9 (2017): 2056–63.","ieee":"J. Fettig, V. Pick, and H. Liebe, “Particle separation from road runoff by a decentralised lamella system – laboratory tests and experiences in the field,” Wat. Sci. Tech., vol. 75, no. 9, pp. 2056–2063, 2017.","ama":"Fettig J, Pick V, Liebe H. Particle separation from road runoff by a decentralised lamella system – laboratory tests and experiences in the field. Wat Sci Tech. 2017;75(9):2056-2063.","van":"Fettig J, Pick V, Liebe H. Particle separation from road runoff by a decentralised lamella system – laboratory tests and experiences in the field. Wat Sci Tech. 2017;75(9):2056–63.","short":"J. Fettig, V. Pick, H. Liebe, Wat. Sci. Tech. 75 (2017) 2056–2063.","mla":"Fettig, Joachim, et al. “Particle Separation from Road Runoff by a Decentralised Lamella System – Laboratory Tests and Experiences in the Field.” Wat. Sci. Tech., vol. 75, no. 9, 2017, pp. 2056–63.","apa":"Fettig, J., Pick, V., & Liebe, H. (2017). Particle separation from road runoff by a decentralised lamella system – laboratory tests and experiences in the field. Wat. Sci. Tech., 75(9), 2056–2063.","ufg":"Fettig, Joachim et. al. (2017): Particle separation from road runoff by a decentralised lamella system – laboratory tests and experiences in the field, in: Wat. Sci. Tech. 75 (9), S. 2056–2063.","chicago-de":"Fettig, Joachim, Volker Pick und H. Liebe. 2017. Particle separation from road runoff by a decentralised lamella system – laboratory tests and experiences in the field. Wat. Sci. Tech. 75, Nr. 9: 2056–2063.","havard":"J. Fettig, V. Pick, H. Liebe, Particle separation from road runoff by a decentralised lamella system – laboratory tests and experiences in the field, Wat. Sci. Tech. 75 (2017) 2056–2063."},"date_created":"2021-02-25T14:27:39Z","language":[{"iso":"eng"}],"volume":"75 ","author":[{"last_name":"Fettig","id":"21018","full_name":"Fettig, Joachim","first_name":"Joachim"},{"first_name":"Volker","full_name":"Pick, Volker","last_name":"Pick","id":"21101"},{"full_name":"Liebe, H.","last_name":"Liebe","first_name":"H."}],"type":"journal_article","date_updated":"2023-03-15T13:49:57Z","title":"Particle separation from road runoff by a decentralised lamella system – laboratory tests and experiences in the field","issue":"9"},{"_id":"5055","page":"368-369","user_id":"74004","year":2017,"department":[{"_id":"DEP8020"}],"status":"public","publication":"Hydrologie und Wasserbewirtschaftung ","issue":"6","date_updated":"2023-03-15T13:49:57Z","title":"Forschungskooperation mit Vietnam – das BMBF-Verbundvorhaben EWATEC-COAST","author":[{"last_name":"Meon","full_name":"Meon, G.","first_name":"G."},{"full_name":"Fettig, Joachim","last_name":"Fettig","id":"21018","first_name":"Joachim"},{"last_name":"Phuoc","full_name":"Phuoc, N.V.","first_name":"N.V."}],"intvolume":" 61","type":"journal_article","citation":{"ieee":"G. Meon, J. Fettig, and N. V. Phuoc, “Forschungskooperation mit Vietnam – das BMBF-Verbundvorhaben EWATEC-COAST,” Hydrologie und Wasserbewirtschaftung , vol. 61, no. 6, pp. 368–369, 2017.","van":"Meon G, Fettig J, Phuoc NV. Forschungskooperation mit Vietnam – das BMBF-Verbundvorhaben EWATEC-COAST. Hydrologie und Wasserbewirtschaftung . 2017;61(6):368–9.","ama":"Meon G, Fettig J, Phuoc NV. Forschungskooperation mit Vietnam – das BMBF-Verbundvorhaben EWATEC-COAST. Hydrologie und Wasserbewirtschaftung . 2017;61(6):368-369.","bjps":"Meon G, Fettig J and Phuoc NV (2017) Forschungskooperation Mit Vietnam – Das BMBF-Verbundvorhaben EWATEC-COAST. Hydrologie und Wasserbewirtschaftung 61, 368–369.","din1505-2-1":"Meon, G. ; Fettig, Joachim ; Phuoc, N.V.: Forschungskooperation mit Vietnam – das BMBF-Verbundvorhaben EWATEC-COAST. In: Hydrologie und Wasserbewirtschaftung Bd. 61 (2017), Nr. 6, S. 368–369","chicago":"Meon, G., Joachim Fettig, and N.V. Phuoc. “Forschungskooperation Mit Vietnam – Das BMBF-Verbundvorhaben EWATEC-COAST.” Hydrologie Und Wasserbewirtschaftung 61, no. 6 (2017): 368–69.","havard":"G. Meon, J. Fettig, N.V. Phuoc, Forschungskooperation mit Vietnam – das BMBF-Verbundvorhaben EWATEC-COAST, Hydrologie Und Wasserbewirtschaftung . 61 (2017) 368–369.","short":"G. Meon, J. Fettig, N.V. Phuoc, Hydrologie Und Wasserbewirtschaftung 61 (2017) 368–369.","apa":"Meon, G., Fettig, J., & Phuoc, N. V. (2017). Forschungskooperation mit Vietnam – das BMBF-Verbundvorhaben EWATEC-COAST. Hydrologie Und Wasserbewirtschaftung , 61(6), 368–369.","mla":"Meon, G., et al. “Forschungskooperation Mit Vietnam – Das BMBF-Verbundvorhaben EWATEC-COAST.” Hydrologie Und Wasserbewirtschaftung , vol. 61, no. 6, 2017, pp. 368–69.","ufg":"Meon, G. et. al. (2017): Forschungskooperation mit Vietnam – das BMBF-Verbundvorhaben EWATEC-COAST, in: Hydrologie und Wasserbewirtschaftung 61 (6), S. 368–369.","chicago-de":"Meon, G., Joachim Fettig und N.V. Phuoc. 2017. Forschungskooperation mit Vietnam – das BMBF-Verbundvorhaben EWATEC-COAST. Hydrologie und Wasserbewirtschaftung 61, Nr. 6: 368–369."},"volume":61,"date_created":"2021-02-25T14:30:48Z","language":[{"iso":"eng"}]},{"doi":"10.1007/s10551-017-3640-1","date_updated":"2023-03-15T13:49:58Z","title":"Female Executives and Perceived Employer Attractiveness: On the Potentially Adverse Signal of Having a Female CHRO Rather Than a Female CFO","author":[{"last_name":"Iseke","id":"68702","full_name":"Iseke, Anja","first_name":"Anja"},{"first_name":"Kerstin","last_name":"Pull","full_name":"Pull, Kerstin"}],"type":"journal_article","publication_identifier":{"issn":["0167-4544","1573-0697"]},"citation":{"havard":"A. Iseke, K. Pull, Female Executives and Perceived Employer Attractiveness: On the Potentially Adverse Signal of Having a Female CHRO Rather Than a Female CFO, Journal of Business Ethics. (2017) 1113–1133.","mla":"Iseke, Anja, and Kerstin Pull. “Female Executives and Perceived Employer Attractiveness: On the Potentially Adverse Signal of Having a Female CHRO Rather Than a Female CFO.” Journal of Business Ethics, 2017, pp. 1113–33, doi:10.1007/s10551-017-3640-1.","apa":"Iseke, A., & Pull, K. (2017). Female Executives and Perceived Employer Attractiveness: On the Potentially Adverse Signal of Having a Female CHRO Rather Than a Female CFO. Journal of Business Ethics, 1113–1133. https://doi.org/10.1007/s10551-017-3640-1","short":"A. Iseke, K. Pull, Journal of Business Ethics (2017) 1113–1133.","chicago-de":"Iseke, Anja und Kerstin Pull. 2017. Female Executives and Perceived Employer Attractiveness: On the Potentially Adverse Signal of Having a Female CHRO Rather Than a Female CFO. Journal of Business Ethics: 1113–1133. doi:10.1007/s10551-017-3640-1, .","ufg":"Iseke, Anja/Pull, Kerstin (2017): Female Executives and Perceived Employer Attractiveness: On the Potentially Adverse Signal of Having a Female CHRO Rather Than a Female CFO, in: Journal of Business Ethics, S. 1113–1133.","ieee":"A. Iseke and K. Pull, “Female Executives and Perceived Employer Attractiveness: On the Potentially Adverse Signal of Having a Female CHRO Rather Than a Female CFO,” Journal of Business Ethics, pp. 1113–1133, 2017.","ama":"Iseke A, Pull K. Female Executives and Perceived Employer Attractiveness: On the Potentially Adverse Signal of Having a Female CHRO Rather Than a Female CFO. Journal of Business Ethics. 2017:1113-1133. doi:10.1007/s10551-017-3640-1","van":"Iseke A, Pull K. Female Executives and Perceived Employer Attractiveness: On the Potentially Adverse Signal of Having a Female CHRO Rather Than a Female CFO. Journal of Business Ethics. 2017;1113–33.","din1505-2-1":"Iseke, Anja ; Pull, Kerstin: Female Executives and Perceived Employer Attractiveness: On the Potentially Adverse Signal of Having a Female CHRO Rather Than a Female CFO. In: Journal of Business Ethics (2017), S. 1113–1133","bjps":"Iseke A and Pull K (2017) Female Executives and Perceived Employer Attractiveness: On the Potentially Adverse Signal of Having a Female CHRO Rather Than a Female CFO. Journal of Business Ethics 1113–1133.","chicago":"Iseke, Anja, and Kerstin Pull. “Female Executives and Perceived Employer Attractiveness: On the Potentially Adverse Signal of Having a Female CHRO Rather Than a Female CFO.” Journal of Business Ethics, 2017, 1113–33. https://doi.org/10.1007/s10551-017-3640-1."},"language":[{"iso":"eng"}],"date_created":"2021-03-03T13:31:14Z","publication_status":"published","_id":"5186","page":"1113-1133","user_id":"79078","year":2017,"department":[{"_id":"DEP1512"}],"status":"public","publication":"Journal of Business Ethics"},{"_id":"5188","page":"17-21","year":2017,"user_id":"79078","department":[{"_id":"DEP1512"}],"status":"public","publication":" PersonalQuarterly, Vol. 69 (4)","main_file_link":[{"url":"https://www.haufe.de/download/personalquarterly-42017-rekrutierung-personalquarterly-427110.pdf"}],"date_updated":"2023-03-15T13:49:58Z","title":"Weibliche Nachwuchskräfte gewinnen? Mit Geschlechterstereotypen brechen!","type":"journal_article","author":[{"first_name":"Anja","full_name":"Iseke, Anja","id":"68702","last_name":"Iseke"},{"first_name":"Kerstin","last_name":"Pull","full_name":"Pull, Kerstin"}],"citation":{"chicago-de":"Iseke, Anja und Kerstin Pull. 2017. Weibliche Nachwuchskräfte gewinnen? Mit Geschlechterstereotypen brechen! PersonalQuarterly, Vol. 69 (4): 17–21.","ufg":"Iseke, Anja/Pull, Kerstin (2017): Weibliche Nachwuchskräfte gewinnen? Mit Geschlechterstereotypen brechen!, in: PersonalQuarterly, Vol. 69 (4), S. 17–21.","mla":"Iseke, Anja, and Kerstin Pull. “Weibliche Nachwuchskräfte Gewinnen? Mit Geschlechterstereotypen Brechen!” PersonalQuarterly, Vol. 69 (4), 2017, pp. 17–21.","apa":"Iseke, A., & Pull, K. (2017). Weibliche Nachwuchskräfte gewinnen? Mit Geschlechterstereotypen brechen! PersonalQuarterly, Vol. 69 (4), 17–21.","short":"A. Iseke, K. Pull, PersonalQuarterly, Vol. 69 (4) (2017) 17–21.","havard":"A. Iseke, K. Pull, Weibliche Nachwuchskräfte gewinnen? Mit Geschlechterstereotypen brechen!, PersonalQuarterly, Vol. 69 (4). (2017) 17–21.","chicago":"Iseke, Anja, and Kerstin Pull. “Weibliche Nachwuchskräfte Gewinnen? Mit Geschlechterstereotypen Brechen!” PersonalQuarterly, Vol. 69 (4), 2017, 17–21.","din1505-2-1":"Iseke, Anja ; Pull, Kerstin: Weibliche Nachwuchskräfte gewinnen? Mit Geschlechterstereotypen brechen! In: PersonalQuarterly, Vol. 69 (4) (2017), S. 17–21","bjps":"Iseke A and Pull K (2017) Weibliche Nachwuchskräfte Gewinnen? Mit Geschlechterstereotypen Brechen! PersonalQuarterly, Vol. 69 (4) 17–21.","van":"Iseke A, Pull K. Weibliche Nachwuchskräfte gewinnen? Mit Geschlechterstereotypen brechen! PersonalQuarterly, Vol 69 (4). 2017;17–21.","ama":"Iseke A, Pull K. Weibliche Nachwuchskräfte gewinnen? Mit Geschlechterstereotypen brechen! PersonalQuarterly, Vol 69 (4). 2017:17-21.","ieee":"A. Iseke and K. Pull, “Weibliche Nachwuchskräfte gewinnen? Mit Geschlechterstereotypen brechen!,” PersonalQuarterly, Vol. 69 (4), pp. 17–21, 2017."},"date_created":"2021-03-03T13:37:24Z","language":[{"iso":"eng"}]},{"page":"4771-4778","conference":{"name":"33rd PLEA International Conference : Design to Thrive","end_date":"2017-07-05","start_date":"2017-07-02","location":"Edinburgh, Scotland"},"_id":"5192","status":"public","publication":"Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al.","user_id":"45673","year":2017,"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"date_updated":"2023-03-15T13:49:58Z","main_file_link":[{"url":"https://repository.uantwerpen.be/docman/iruaauth/3b0129/147552.pdf"}],"quality_controlled":"1","title":"Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product","citation":{"bjps":"Pottgiesser U and Kirch C (2017) Developing Sound Absorbers for Health Facilities : How to Meet Hygienic and Acoustic Requirements in One Product. Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al. pp. 4771–4778.","din1505-2-1":"Pottgiesser, Uta ; Kirch, Christoph: Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product. In: Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al., 2017, S. 4771–4778","chicago":"Pottgiesser, Uta, and Christoph Kirch. “Developing Sound Absorbers for Health Facilities : How to Meet Hygienic and Acoustic Requirements in One Product.” In Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al., 4771–78, 2017.","ieee":"U. Pottgiesser and C. Kirch, “Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product,” in Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al., Edinburgh, Scotland, 2017, pp. 4771–4778.","van":"Pottgiesser U, Kirch C. Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product. In: Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit]; et al. 2017. p. 4771–8.","ama":"Pottgiesser U, Kirch C. Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product. In: Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al. ; 2017:4771-4778.","short":"U. Pottgiesser, C. Kirch, in: Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al., 2017, pp. 4771–4778.","mla":"Pottgiesser, Uta, and Christoph Kirch. “Developing Sound Absorbers for Health Facilities : How to Meet Hygienic and Acoustic Requirements in One Product.” Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al., 2017, pp. 4771–78.","apa":"Pottgiesser, U., & Kirch, C. (2017). Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product. In Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al. (pp. 4771–4778). Edinburgh, Scotland.","ufg":"Pottgiesser, Uta/Kirch, Christoph (2017): Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product, in: Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al., S. 4771–4778.","chicago-de":"Pottgiesser, Uta und Christoph Kirch. 2017. Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product. In: Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al., 4771–4778.","havard":"U. Pottgiesser, C. Kirch, Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product, in: Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al., 2017: pp. 4771–4778."},"publication_status":"published","language":[{"iso":"eng"}],"date_created":"2021-03-03T13:46:23Z","type":"conference","author":[{"orcid":"0000-0002-8594-3168","full_name":"Pottgiesser, Uta","id":"27166","last_name":"Pottgiesser","first_name":"Uta"},{"last_name":"Kirch","full_name":"Kirch, Christoph","first_name":"Christoph"}],"publication_identifier":{"isbn":["978-0-9928957-5-4"]}},{"department":[{"_id":"DEP1020"},{"_id":"DEP1302"},{"_id":"DEP1055"}],"year":2017,"user_id":"45673","publication":"Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al.","status":"public","_id":"5196","conference":{"name":"33rd PLEA International Conference : Design to Thrive","end_date":"2017-07-05","start_date":"2017-07-02","location":"Edinburgh, Scotland"},"publication_identifier":{"isbn":["978-0-9928957-5-4"]},"type":"conference","author":[{"first_name":"Christine","full_name":"Naumann, Christine","id":"11346","last_name":"Naumann"},{"first_name":"Ulrike","full_name":"Höhmann, Ulrike","last_name":"Höhmann"},{"orcid":"0000-0002-8594-3168","first_name":"Uta","full_name":"Pottgiesser, Uta","id":"27166","last_name":"Pottgiesser"}],"publication_status":"published","date_created":"2021-03-03T13:46:23Z","language":[{"iso":"eng"}],"citation":{"ieee":"C. Naumann, U. Höhmann, and U. Pottgiesser, “Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia,” in Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al., Edinburgh, Scotland, 2017.","havard":"C. Naumann, U. Höhmann, U. Pottgiesser, Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia, in: Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al., 2017.","van":"Naumann C, Höhmann U, Pottgiesser U. Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia. In: Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit]; et al. 2017.","ama":"Naumann C, Höhmann U, Pottgiesser U. Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia. In: Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al. ; 2017.","bjps":"Naumann C, Höhmann U and Pottgiesser U (2017) Development of an Analysis Tool to Match Home Environmental Interventions to the Specific Needs of People with Dementia. Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al.","short":"C. Naumann, U. Höhmann, U. Pottgiesser, in: Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al., 2017.","din1505-2-1":"Naumann, Christine ; Höhmann, Ulrike ; Pottgiesser, Uta: Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia. In: Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al., 2017","apa":"Naumann, C., Höhmann, U., & Pottgiesser, U. (2017). Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia. In Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al. Edinburgh, Scotland.","mla":"Naumann, Christine, et al. “Development of an Analysis Tool to Match Home Environmental Interventions to the Specific Needs of People with Dementia.” Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al., 2017.","ufg":"Naumann, Christine et. al. (2017): Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia, in: Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al.","chicago-de":"Naumann, Christine, Ulrike Höhmann und Uta Pottgiesser. 2017. Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia. In: Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al.","chicago":"Naumann, Christine, Ulrike Höhmann, and Uta Pottgiesser. “Development of an Analysis Tool to Match Home Environmental Interventions to the Specific Needs of People with Dementia.” In Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al., 2017."},"quality_controlled":"1","title":"Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia","main_file_link":[{"url":"https://repository.uantwerpen.be/docman/iruaauth/3b0129/147552.pdf"}],"date_updated":"2023-03-15T13:49:58Z"},{"publication_identifier":{"isbn":["978-94-92516-87-9"]},"type":"book","author":[{"first_name":"Ulrich","id":"27160","last_name":"Knaack","full_name":"Knaack, Ulrich"},{"full_name":"Pottgiesser, Uta","last_name":"Pottgiesser","id":"27166","first_name":"Uta","orcid":"0000-0002-8594-3168"}],"publication_status":"published","language":[{"iso":"eng"}],"publisher":" TU Delft Open","date_created":"2021-03-03T13:55:57Z","citation":{"mla":"Knaack, Ulrich, and Uta Pottgiesser. EfnMOBILE 2.0 : Efficient Envelopes. TU Delft Open, 2017.","apa":"Knaack, U., & Pottgiesser, U. (2017). efnMOBILE 2.0 : efficient envelopes. TU Delft Open.","short":"U. Knaack, U. Pottgiesser, EfnMOBILE 2.0 : Efficient Envelopes, TU Delft Open, 2017.","chicago-de":"Knaack, Ulrich und Uta Pottgiesser. 2017. efnMOBILE 2.0 : efficient envelopes. TU Delft Open.","ufg":"Knaack, Ulrich/Pottgiesser, Uta (2017): efnMOBILE 2.0 : efficient envelopes.","havard":"U. Knaack, U. Pottgiesser, efnMOBILE 2.0 : efficient envelopes, TU Delft Open, 2017.","din1505-2-1":"Knaack, Ulrich ; Pottgiesser, Uta: efnMOBILE 2.0 : efficient envelopes : TU Delft Open, 2017","bjps":"Knaack U and Pottgiesser U (2017) EfnMOBILE 2.0 : Efficient Envelopes. TU Delft Open.","chicago":"Knaack, Ulrich, and Uta Pottgiesser. EfnMOBILE 2.0 : Efficient Envelopes. TU Delft Open, 2017.","ieee":"U. Knaack and U. Pottgiesser, efnMOBILE 2.0 : efficient envelopes. TU Delft Open, 2017.","ama":"Knaack U, Pottgiesser U. EfnMOBILE 2.0 : Efficient Envelopes. TU Delft Open; 2017.","van":"Knaack U, Pottgiesser U. efnMOBILE 2.0 : efficient envelopes. TU Delft Open; 2017."},"title":"efnMOBILE 2.0 : efficient envelopes","date_updated":"2023-03-15T13:49:58Z","main_file_link":[{"url":"https://repository.uantwerpen.be/docman/irua/031a68/147549.pdf","open_access":"1"}],"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"user_id":"45673","year":2017,"status":"public","_id":"5197","oa":"1"},{"_id":"5199","date_updated":"2023-03-15T13:49:58Z","title":"Mensen op de vlucht = People on the run","author":[{"full_name":"Pottgiesser, Uta","last_name":"Pottgiesser","id":"27166","first_name":"Uta","orcid":"0000-0002-8594-3168"},{"first_name":"Eva","last_name":"Storgaard","full_name":"Storgaard, Eva"},{"first_name":"Iris","last_name":"Van der Schueren","full_name":"Van der Schueren, Iris"},{"full_name":"Wauters, Paul","last_name":"Wauters","first_name":"Paul"}],"year":2017,"type":"book","user_id":"45673","department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"citation":{"van":"Pottgiesser U, Storgaard E, Van der Schueren I, Wauters P. Mensen op de vlucht = People on the run. 2017.","ama":"Pottgiesser U, Storgaard E, Van der Schueren I, Wauters P. Mensen Op de Vlucht = People on the Run.; 2017.","ieee":"U. Pottgiesser, E. Storgaard, I. Van der Schueren, and P. Wauters, Mensen op de vlucht = People on the run. 2017.","chicago":"Pottgiesser, Uta, Eva Storgaard, Iris Van der Schueren, and Paul Wauters. Mensen Op de Vlucht = People on the Run, 2017.","bjps":"Pottgiesser U et al. (2017) Mensen Op de Vlucht = People on the Run. .","din1505-2-1":"Pottgiesser, Uta ; Storgaard, Eva ; Van der Schueren, Iris ; Wauters, Paul: Mensen op de vlucht = People on the run, 2017","havard":"U. Pottgiesser, E. Storgaard, I. Van der Schueren, P. Wauters, Mensen op de vlucht = People on the run, 2017.","ufg":"Pottgiesser, Uta et. al. (2017): Mensen op de vlucht = People on the run.","chicago-de":"Pottgiesser, Uta, Eva Storgaard, Iris Van der Schueren und Paul Wauters. 2017. Mensen op de vlucht = People on the run.","short":"U. Pottgiesser, E. Storgaard, I. Van der Schueren, P. Wauters, Mensen Op de Vlucht = People on the Run, 2017.","mla":"Pottgiesser, Uta, et al. Mensen Op de Vlucht = People on the Run. 2017.","apa":"Pottgiesser, U., Storgaard, E., Van der Schueren, I., & Wauters, P. (2017). Mensen op de vlucht = People on the run."},"status":"public","publication_status":"published","language":[{"iso":"eng"}],"date_created":"2021-03-03T14:03:53Z"},{"_id":"5362","oa":"1","abstract":[{"text":"Seit 2016 erscheint das urbanLab Magazin jährlich als Fachzeitschrift für Stadt- und Regionalplanung mit dem Anspruch Forschung, Lehre und der Praxis in den Planungsdisziplinen des Spannungsfeldes Stadt und Quartier anhand konkreter Themencluster besser zu vernetzen. Wir geben zukunftsweisenden Ideen, Fachbeiträgen, Publikationen und kontroversen Diskussionen eine Plattform und bringen sie unterstützt durch Erkenntnisse aus unserer Forschung auf den Punkt.","lang":"ger"}],"department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"corporate_editor":["Technische Hochschule Ostwestfalen-Lippe","Forschungsschwerpunkt urbanLab"],"user_id":"45673","year":2017,"publication":"Die Stadt der Zukunft - Digital, gesund, sozial ","status":"public","issue":"2","title":"urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung","date_updated":"2023-03-15T13:49:59Z","main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63562637/urbanlab-magazin-2017-die-stadt-der-zukunft","open_access":"1"}],"publication_identifier":{"issn":["2566-8900"],"eissn":["2566-8919"]},"type":"journal_editor","date_created":"2021-03-30T10:43:39Z","language":[{"iso":"ger"}],"editor":[{"first_name":"Oliver","id":"27136","last_name":"Hall","full_name":"Hall, Oliver"},{"full_name":"Cardinali, Marcel","id":"58462","last_name":"Cardinali","first_name":"Marcel","orcid":"0000-0002-8841-9345"}],"publication_status":"published","citation":{"havard":"O. Hall, M. Cardinali, Technische Hochschule Ostwestfalen-Lippe, eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2017.","chicago-de":"Hall, Oliver, Marcel Cardinali und Technische Hochschule Ostwestfalen-Lippe, Hrsg. 2017. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Die Stadt der Zukunft - Digital, gesund, sozial .","ufg":"Hall, Oliver et. al. (Hgg.) (2017): urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.","mla":"Hall, Oliver, et al., editors. “urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.” Die Stadt der Zukunft - Digital, gesund, sozial , no. 2, 2017.","apa":"Hall, O., Cardinali, M., & Technische Hochschule Ostwestfalen-Lippe (Eds.). (2017). urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Die Stadt der Zukunft - Digital, gesund, sozial .","short":"O. Hall, M. Cardinali, Technische Hochschule Ostwestfalen-Lippe, eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2017.","van":"Hall O, Cardinali M, Technische Hochschule Ostwestfalen-Lippe, editors. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Die Stadt der Zukunft - Digital, gesund, sozial . 2017.","ama":"Hall O, Cardinali M, Technische Hochschule Ostwestfalen-Lippe, eds. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.; 2017.","ieee":"O. Hall, M. Cardinali, and Technische Hochschule Ostwestfalen-Lippe, Eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, no. 2. 2017.","chicago":"Hall, Oliver, Marcel Cardinali, and Technische Hochschule Ostwestfalen-Lippe, eds. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Die Stadt der Zukunft - Digital, gesund, sozial , 2017.","din1505-2-1":"Hall, O. ; Cardinali, M. ; Technische Hochschule Ostwestfalen-Lippe (Hrsg.): urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2017","bjps":"Hall O, Cardinali M and Technische Hochschule Ostwestfalen-Lippe (eds) (2017) urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. ."}},{"title":"Ethische Aspekte in der Forschung zu Mensch-Maschine-Systemen - Einblicke in die Arbeit einer Ethik-Kommission","quality_controlled":"1","date_updated":"2023-03-15T13:49:59Z","volume":"Politik, Strategie, Management 10(3/4)","date_created":"2021-04-02T16:47:03Z","language":[{"iso":"ger"}],"citation":{"havard":"S. Brandenburg, M. Minge, D.H. Cymek, L. Zeidler, Ethische Aspekte in der Forschung zu Mensch-Maschine-Systemen - Einblicke in die Arbeit einer Ethik-Kommission, Zeitschrift Forschung. Politik, Strategie, Management 10(3/4) (2017) 101–106.","ieee":"S. Brandenburg, M. Minge, D. H. Cymek, and L. Zeidler, “Ethische Aspekte in der Forschung zu Mensch-Maschine-Systemen - Einblicke in die Arbeit einer Ethik-Kommission,” Zeitschrift Forschung, vol. Politik, Strategie, Management 10(3/4), pp. 101–106, 2017.","ama":"Brandenburg S, Minge M, Cymek DH, Zeidler L. Ethische Aspekte in der Forschung zu Mensch-Maschine-Systemen - Einblicke in die Arbeit einer Ethik-Kommission. Zeitschrift Forschung. 2017;Politik, Strategie, Management 10(3/4):101-106.","van":"Brandenburg S, Minge M, Cymek DH, Zeidler L. Ethische Aspekte in der Forschung zu Mensch-Maschine-Systemen - Einblicke in die Arbeit einer Ethik-Kommission. Zeitschrift Forschung. 2017;Politik, Strategie, Management 10(3/4):101–6.","mla":"Brandenburg, Stefan, et al. “Ethische Aspekte in der Forschung zu Mensch-Maschine-Systemen - Einblicke in die Arbeit einer Ethik-Kommission.” Zeitschrift Forschung, vol. Politik, Strategie, Management 10(3/4), 2017, pp. 101–06.","apa":"Brandenburg, S., Minge, M., Cymek, D. H., & Zeidler, L. (2017). Ethische Aspekte in der Forschung zu Mensch-Maschine-Systemen - Einblicke in die Arbeit einer Ethik-Kommission. Zeitschrift Forschung, Politik, Strategie, Management 10(3/4), 101–106.","din1505-2-1":"Brandenburg, Stefan ; Minge, Michael ; Cymek, Dietlind Helene ; Zeidler, Laura: Ethische Aspekte in der Forschung zu Mensch-Maschine-Systemen - Einblicke in die Arbeit einer Ethik-Kommission. In: Zeitschrift Forschung Bd. Politik, Strategie, Management 10(3/4) (2017), S. 101–106","short":"S. Brandenburg, M. Minge, D.H. Cymek, L. Zeidler, Zeitschrift Forschung Politik, Strategie, Management 10(3/4) (2017) 101–106.","bjps":"Brandenburg S et al. (2017) Ethische Aspekte in der Forschung zu Mensch-Maschine-Systemen - Einblicke in die Arbeit einer Ethik-Kommission. Zeitschrift Forschung Politik, Strategie, Management 10(3/4), 101–106.","chicago":"Brandenburg, Stefan, Michael Minge, Dietlind Helene Cymek, and Laura Zeidler. “Ethische Aspekte in der Forschung zu Mensch-Maschine-Systemen - Einblicke in die Arbeit einer Ethik-Kommission.” Zeitschrift Forschung Politik, Strategie, Management 10(3/4) (2017): 101–6.","chicago-de":"Brandenburg, Stefan, Michael Minge, Dietlind Helene Cymek und Laura Zeidler. 2017. Ethische Aspekte in der Forschung zu Mensch-Maschine-Systemen - Einblicke in die Arbeit einer Ethik-Kommission. Zeitschrift Forschung Politik, Strategie, Management 10(3/4): 101–106.","ufg":"Brandenburg, Stefan et. al. (2017): Ethische Aspekte in der Forschung zu Mensch-Maschine-Systemen - Einblicke in die Arbeit einer Ethik-Kommission, in: Zeitschrift Forschung Politik, Strategie, Management 10(3/4), S. 101–106."},"author":[{"last_name":"Brandenburg","full_name":"Brandenburg, Stefan","first_name":"Stefan"},{"first_name":"Michael","full_name":"Minge, Michael","last_name":"Minge","id":"78302","orcid":"0000-0003-1930-7064"},{"full_name":"Cymek, Dietlind Helene","last_name":"Cymek","first_name":"Dietlind Helene"},{"first_name":"Laura","last_name":"Zeidler","full_name":"Zeidler, Laura"}],"type":"journal_article","page":"101-106","_id":"5396","publication":" Zeitschrift Forschung","status":"public","department":[{"_id":"DEP1518"}],"year":2017,"user_id":"15514"},{"volume":"16(3)","date_created":"2021-04-02T17:04:43Z","language":[{"iso":"eng"}],"citation":{"ieee":"S. Brandenburg, M. Minge, and D. H. Cymek, “Common Challenges in Ethical Practice when Testing Technology with Human Participants: Analyzing the Experiences of a Local Ethics Committee,” i-com, Journal of Interactive Media, vol. 16(3), pp. 267–273, 2017.","havard":"S. Brandenburg, M. Minge, D.H. Cymek, Common Challenges in Ethical Practice when Testing Technology with Human Participants: Analyzing the Experiences of a Local Ethics Committee, I-Com, Journal of Interactive Media. 16(3) (2017) 267–273.","van":"Brandenburg S, Minge M, Cymek DH. Common Challenges in Ethical Practice when Testing Technology with Human Participants: Analyzing the Experiences of a Local Ethics Committee. i-com, Journal of Interactive Media. 2017;16(3):267–73.","ama":"Brandenburg S, Minge M, Cymek DH. Common Challenges in Ethical Practice when Testing Technology with Human Participants: Analyzing the Experiences of a Local Ethics Committee. i-com, Journal of Interactive Media. 2017;16(3):267-273.","bjps":"Brandenburg S, Minge M and Cymek DH (2017) Common Challenges in Ethical Practice When Testing Technology with Human Participants: Analyzing the Experiences of a Local Ethics Committee. i-com, Journal of Interactive Media 16(3), 267–273.","short":"S. Brandenburg, M. Minge, D.H. Cymek, I-Com, Journal of Interactive Media 16(3) (2017) 267–273.","din1505-2-1":"Brandenburg, Stefan ; Minge, Michael ; Cymek, Dietlind Helene: Common Challenges in Ethical Practice when Testing Technology with Human Participants: Analyzing the Experiences of a Local Ethics Committee. In: i-com, Journal of Interactive Media Bd. 16(3) (2017), S. 267–273","mla":"Brandenburg, Stefan, et al. “Common Challenges in Ethical Practice When Testing Technology with Human Participants: Analyzing the Experiences of a Local Ethics Committee.” I-Com, Journal of Interactive Media, vol. 16(3), 2017, pp. 267–73.","apa":"Brandenburg, S., Minge, M., & Cymek, D. H. (2017). Common Challenges in Ethical Practice when Testing Technology with Human Participants: Analyzing the Experiences of a Local Ethics Committee. I-Com, Journal of Interactive Media, 16(3), 267–273.","ufg":"Brandenburg, Stefan et. al. (2017): Common Challenges in Ethical Practice when Testing Technology with Human Participants: Analyzing the Experiences of a Local Ethics Committee, in: i-com, Journal of Interactive Media 16(3), S. 267–273.","chicago":"Brandenburg, Stefan, Michael Minge, and Dietlind Helene Cymek. “Common Challenges in Ethical Practice When Testing Technology with Human Participants: Analyzing the Experiences of a Local Ethics Committee.” I-Com, Journal of Interactive Media 16(3) (2017): 267–73.","chicago-de":"Brandenburg, Stefan, Michael Minge und Dietlind Helene Cymek. 2017. Common Challenges in Ethical Practice when Testing Technology with Human Participants: Analyzing the Experiences of a Local Ethics Committee. i-com, Journal of Interactive Media 16(3): 267–273."},"author":[{"full_name":"Brandenburg, Stefan","last_name":"Brandenburg","first_name":"Stefan"},{"id":"78302","last_name":"Minge","full_name":"Minge, Michael","first_name":"Michael","orcid":"0000-0003-1930-7064"},{"full_name":"Cymek, Dietlind Helene","last_name":"Cymek","first_name":"Dietlind Helene"}],"type":"journal_article","title":"Common Challenges in Ethical Practice when Testing Technology with Human Participants: Analyzing the Experiences of a Local Ethics Committee","quality_controlled":"1","date_updated":"2023-03-15T13:49:59Z","publication":"i-com, Journal of Interactive Media","status":"public","department":[{"_id":"DEP1518"}],"year":2017,"user_id":"15514","page":"267-273","_id":"5397"},{"year":"2017","user_id":"83779","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"status":"public","_id":"5574","conference":{"location":"Bruchsal","name":"ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik","end_date":"2017-02-15","start_date":"2017-02-14"},"type":"conference","author":[{"full_name":"Rossmann, Sören","id":"61416","last_name":"Rossmann","first_name":"Sören"},{"last_name":"Wolff","full_name":"Wolff, V.","first_name":"V."},{"first_name":"Ulrich","full_name":"Müller, Ulrich","last_name":"Müller","id":"12119"},{"orcid":"0000-0001-6401-8873","full_name":"Schneider, Jan","last_name":"Schneider","id":"13209","first_name":"Jan"}],"citation":{"chicago-de":"Rossmann, Sören, V. Wolff, Ulrich Müller und Jan Schneider. 2017. Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen. In: .","chicago":"Rossmann, Sören, V. Wolff, Ulrich Müller, and Jan Schneider. “Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen,” 2017.","ufg":"Rossmann, Sören u. a.: Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen, in: o. Hg.: o. O. 2017.","mla":"Rossmann, Sören, et al. Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen. 2017.","apa":"Rossmann, S., Wolff, V., Müller, U., & Schneider, J. (2017). Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen. ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Bruchsal.","din1505-2-1":"Rossmann, Sören ; Wolff, V. ; Müller, Ulrich ; Schneider, Jan: Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen. In: , 2017","short":"S. Rossmann, V. Wolff, U. Müller, J. Schneider, in: 2017.","bjps":"Rossmann S et al. (2017) Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen.","ama":"Rossmann S, Wolff V, Müller U, Schneider J. Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen. In: ; 2017.","van":"Rossmann S, Wolff V, Müller U, Schneider J. Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen. In 2017.","havard":"S. Rossmann, V. Wolff, U. Müller, J. Schneider, Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen, in: 2017.","ieee":"S. Rossmann, V. Wolff, U. Müller, and J. Schneider, “Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen,” presented at the ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Bruchsal, 2017."},"date_created":"2021-04-16T12:17:39Z","language":[{"iso":"ger"}],"publication_status":"published","date_updated":"2024-05-22T15:20:03Z","title":"Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen"},{"citation":{"havard":"S. Rossmann, V. Wolff, U. Müller, J. Schneider, Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions, BrewingScience . 70 (2017) 31–38.","short":"S. Rossmann, V. Wolff, U. Müller, J. Schneider, BrewingScience 70 (2017) 31–38.","apa":"Rossmann, S., Wolff, V., Müller, U., & Schneider, J. (2017). Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions. BrewingScience , 70(1–2), 31–38.","mla":"Rossmann, Sören, et al. “Impact of Accelerated Shelf-Life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions.” BrewingScience , vol. 70, no. 1–2, Carl, 2017, pp. 31–38.","ufg":"Rossmann, Sören et. al. (2017): Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions, in: BrewingScience 70 (1–2), S. 31–38.","chicago-de":"Rossmann, Sören, V. Wolff, Ulrich Müller und Jan Schneider. 2017. Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions. BrewingScience 70, Nr. 1–2: 31–38.","ieee":"S. Rossmann, V. Wolff, U. Müller, and J. Schneider, “Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions,” BrewingScience , vol. 70, no. 1–2, pp. 31–38, 2017.","ama":"Rossmann S, Wolff V, Müller U, Schneider J. Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions. BrewingScience . 2017;70(1-2):31-38.","van":"Rossmann S, Wolff V, Müller U, Schneider J. Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions. BrewingScience . 2017;70(1–2):31–8.","bjps":"Rossmann S et al. (2017) Impact of Accelerated Shelf-Life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions. BrewingScience 70, 31–38.","din1505-2-1":"Rossmann, Sören ; Wolff, V. ; Müller, Ulrich ; Schneider, Jan: Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions. In: BrewingScience Bd. 70, Carl (2017), Nr. 1–2, S. 31–38","chicago":"Rossmann, Sören, V. Wolff, Ulrich Müller, and Jan Schneider. “Impact of Accelerated Shelf-Life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions.” BrewingScience 70, no. 1–2 (2017): 31–38."},"publication_status":"published","volume":70,"date_created":"2021-04-16T12:19:58Z","language":[{"iso":"eng"}],"intvolume":" 70","author":[{"first_name":"Sören","full_name":"Rossmann, Sören","id":"61416","last_name":"Rossmann"},{"first_name":"V.","full_name":"Wolff, V.","last_name":"Wolff"},{"full_name":"Müller, Ulrich","id":"12119","last_name":"Müller","first_name":"Ulrich"},{"full_name":"Schneider, Jan","last_name":"Schneider","id":"13209","first_name":"Jan"}],"publication_identifier":{"issn":["1866-5195"]},"main_file_link":[{"open_access":"1","url":"https://www.researchgate.net/publication/315111587_Impact_of_Accelerated_Shelf-life_Tests_on_Physical_Stability_of_Beverages_Based_on_Weighted_Orange_Oil_Emulsions"}],"title":"Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions","publication":"BrewingScience ","_id":"5575","oa":"1","publisher":"Carl","type":"journal_article","date_updated":"2023-03-15T13:50:00Z","quality_controlled":"1","issue":"1-2","status":"public","user_id":"15514","year":2017,"department":[{"_id":"DEP4023"}],"page":"31-38"},{"publication":"BrewingScience","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"user_id":"83779","year":"2017","page":"74-84","_id":"5576","date_created":"2021-04-16T12:29:25Z","language":[{"iso":"eng"}],"publication_status":"published","volume":70,"citation":{"chicago-de":"Broeker, Timo, Marc Hoffarth, L. Oppermann, V. Wolff, Pia Rebecca Neubauer und Jan Schneider. 2017. Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor. BrewingScience 70, Nr. 3–4: 74–84.","ufg":"Broeker, Timo u. a.: Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor, in: BrewingScience 70 (2017), H. 3–4,  S. 74–84.","mla":"Broeker, Timo, et al. “Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor.” BrewingScience, vol. 70, no. 3–4, 2017, pp. 74–84.","apa":"Broeker, T., Hoffarth, M., Oppermann, L., Wolff, V., Neubauer, P. R., & Schneider, J. (2017). Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor. BrewingScience, 70(3–4), 74–84.","short":"T. Broeker, M. Hoffarth, L. Oppermann, V. Wolff, P.R. Neubauer, J. Schneider, BrewingScience 70 (2017) 74–84.","havard":"T. Broeker, M. Hoffarth, L. Oppermann, V. Wolff, P.R. Neubauer, J. Schneider, Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor, BrewingScience. 70 (2017) 74–84.","chicago":"Broeker, Timo, Marc Hoffarth, L. Oppermann, V. Wolff, Pia Rebecca Neubauer, and Jan Schneider. “Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor.” BrewingScience 70, no. 3–4 (2017): 74–84.","din1505-2-1":"Broeker, Timo ; Hoffarth, Marc ; Oppermann, L. ; Wolff, V. ; Neubauer, Pia Rebecca ; Schneider, Jan: Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor. In: BrewingScience Bd. 70 (2017), Nr. 3–4, S. 74–84","bjps":"Broeker T et al. (2017) Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor. BrewingScience 70, 74–84.","ama":"Broeker T, Hoffarth M, Oppermann L, Wolff V, Neubauer PR, Schneider J. Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor. BrewingScience. 2017;70(3-4):74-84.","van":"Broeker T, Hoffarth M, Oppermann L, Wolff V, Neubauer PR, Schneider J. Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor. BrewingScience. 2017;70(3–4):74–84.","ieee":"T. Broeker, M. Hoffarth, L. Oppermann, V. Wolff, P. R. Neubauer, and J. Schneider, “Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor,” BrewingScience, vol. 70, no. 3–4, pp. 74–84, 2017."},"author":[{"last_name":"Broeker","id":"43927","full_name":"Broeker, Timo","first_name":"Timo"},{"full_name":"Hoffarth, Marc","id":"52330","last_name":"Hoffarth","first_name":"Marc"},{"first_name":"L.","last_name":"Oppermann","full_name":"Oppermann, L."},{"last_name":"Wolff","full_name":"Wolff, V.","first_name":"V."},{"first_name":"Pia Rebecca","last_name":"Neubauer","id":"75420","full_name":"Neubauer, Pia Rebecca"},{"first_name":"Jan","last_name":"Schneider","id":"13209","full_name":"Schneider, Jan","orcid":"0000-0001-6401-8873"}],"intvolume":" 70","type":"journal_article","title":"Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor","date_updated":"2024-05-22T15:20:45Z","issue":"3-4"},{"status":"public","user_id":"83779","year":"2017","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"conference":{"name":"36th EBC Congress","location":" Ljubljan (Slovenia"},"_id":"5578","citation":{"ieee":"S. Rossmann, V. Wolff, U. Müller, and J. Schneider, “Comparative study of accelerated shelf-life tests  on physical ageing of beverages containing  weighted flavor emulsions,” presented at the 36th EBC Congress, Ljubljan (Slovenia, 2017.","van":"Rossmann S, Wolff V, Müller U, Schneider J. Comparative study of accelerated shelf-life tests  on physical ageing of beverages containing  weighted flavor emulsions. In 2017.","ama":"Rossmann S, Wolff V, Müller U, Schneider J. Comparative study of accelerated shelf-life tests  on physical ageing of beverages containing  weighted flavor emulsions. In: ; 2017.","din1505-2-1":"Rossmann, Sören ; Wolff, V. ; Müller, Ulrich ; Schneider, Jan: Comparative study of accelerated shelf-life tests  on physical ageing of beverages containing  weighted flavor emulsions. In: , 2017","bjps":"Rossmann S et al. (2017) Comparative Study of Accelerated Shelf-Life Tests  on Physical Ageing of Beverages Containing  Weighted Flavor Emulsions.","chicago":"Rossmann, Sören, V. Wolff, Ulrich Müller, and Jan Schneider. “Comparative Study of Accelerated Shelf-Life Tests  on Physical Ageing of Beverages Containing  Weighted Flavor Emulsions,” 2017.","havard":"S. Rossmann, V. Wolff, U. Müller, J. Schneider, Comparative study of accelerated shelf-life tests  on physical ageing of beverages containing  weighted flavor emulsions, in: 2017.","mla":"Rossmann, Sören, et al. Comparative Study of Accelerated Shelf-Life Tests  on Physical Ageing of Beverages Containing  Weighted Flavor Emulsions. 2017.","apa":"Rossmann, S., Wolff, V., Müller, U., & Schneider, J. (2017). Comparative study of accelerated shelf-life tests  on physical ageing of beverages containing  weighted flavor emulsions. 36th EBC Congress, Ljubljan (Slovenia.","short":"S. Rossmann, V. Wolff, U. Müller, J. Schneider, in: 2017.","chicago-de":"Rossmann, Sören, V. Wolff, Ulrich Müller und Jan Schneider. 2017. Comparative study of accelerated shelf-life tests  on physical ageing of beverages containing  weighted flavor emulsions. In: .","ufg":"Rossmann, Sören u. a.: Comparative study of accelerated shelf-life tests  on physical ageing of beverages containing  weighted flavor emulsions, in: o. Hg.: o. O. 2017."},"date_created":"2021-04-16T12:32:40Z","language":[{"iso":"eng"}],"publication_status":"published","type":"conference","author":[{"full_name":"Rossmann, Sören","id":"61416","last_name":"Rossmann","first_name":"Sören"},{"first_name":"V.","last_name":"Wolff","full_name":"Wolff, V."},{"first_name":"Ulrich","last_name":"Müller","id":"12119","full_name":"Müller, Ulrich"},{"first_name":"Jan","full_name":"Schneider, Jan","id":"13209","last_name":"Schneider","orcid":"0000-0001-6401-8873"}],"date_updated":"2024-05-22T15:26:02Z","title":"Comparative study of accelerated shelf-life tests on physical ageing of beverages containing weighted flavor emulsions"},{"language":[{"iso":"eng"}],"date_created":"2021-04-16T12:34:44Z","citation":{"havard":"J. Schneider, M. Hoffarth, T. Broeker, Wet oxidation of spent grains from breweries for the production of fermentable sugars, in: 2017.","apa":"Schneider, J., Hoffarth, M., & Broeker, T. (2017). Wet oxidation of spent grains from breweries for the production of fermentable sugars. 36th EBC Congress, Ljubljana (Slovenia).","mla":"Schneider, Jan, et al. Wet Oxidation of Spent Grains from Breweries for the Production of Fermentable Sugars. 2017.","short":"J. Schneider, M. Hoffarth, T. Broeker, in: 2017.","chicago-de":"Schneider, Jan, Marc Hoffarth und Timo Broeker. 2017. Wet oxidation of spent grains from breweries for the production of fermentable sugars. In: .","ufg":"Schneider, Jan/Hoffarth, Marc/Broeker, Timo: Wet oxidation of spent grains from breweries for the production of fermentable sugars, in: o. Hg.: o. O. 2017.","ieee":"J. Schneider, M. Hoffarth, and T. Broeker, “Wet oxidation of spent grains from breweries for the production of fermentable sugars,” presented at the 36th EBC Congress, Ljubljana (Slovenia), 2017.","van":"Schneider J, Hoffarth M, Broeker T. Wet oxidation of spent grains from breweries for the production of fermentable sugars. In 2017.","ama":"Schneider J, Hoffarth M, Broeker T. Wet oxidation of spent grains from breweries for the production of fermentable sugars. In: ; 2017.","din1505-2-1":"Schneider, Jan ; Hoffarth, Marc ; Broeker, Timo: Wet oxidation of spent grains from breweries for the production of fermentable sugars. In: , 2017","bjps":"Schneider J, Hoffarth M and Broeker T (2017) Wet Oxidation of Spent Grains from Breweries for the Production of Fermentable Sugars.","chicago":"Schneider, Jan, Marc Hoffarth, and Timo Broeker. “Wet Oxidation of Spent Grains from Breweries for the Production of Fermentable Sugars,” 2017."},"type":"conference","author":[{"first_name":"Jan","id":"13209","last_name":"Schneider","full_name":"Schneider, Jan","orcid":"0000-0001-6401-8873"},{"first_name":"Marc","id":"52330","last_name":"Hoffarth","full_name":"Hoffarth, Marc"},{"first_name":"Timo","full_name":"Broeker, Timo","id":"43927","last_name":"Broeker"}],"title":"Wet oxidation of spent grains from breweries for the production of fermentable sugars","date_updated":"2024-05-22T15:28:00Z","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"year":"2017","user_id":"83779","conference":{"location":"Ljubljana (Slovenia)","name":"36th EBC Congress"},"_id":"5579"},{"type":"conference_abstract","author":[{"id":"43927","last_name":"Broeker","full_name":"Broeker, Timo","first_name":"Timo"},{"first_name":"Marc","full_name":"Hoffarth, Marc","last_name":"Hoffarth","id":"52330"},{"first_name":"Klaus","full_name":"Heikrodt, Klaus","last_name":"Heikrodt","id":"46269"},{"first_name":"Jan","full_name":"Schneider, Jan","last_name":"Schneider","id":"13209","orcid":"0000-0001-6401-8873"}],"language":[{"iso":"eng"}],"date_created":"2021-04-16T12:36:47Z","citation":{"ufg":"Broeker, Timo u. a.: Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery, in: o. Hg.: o. O. 2017.","chicago-de":"Broeker, Timo, Marc Hoffarth, Klaus Heikrodt und Jan Schneider. 2017. Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery. In: .","chicago":"Broeker, Timo, Marc Hoffarth, Klaus Heikrodt, and Jan Schneider. “Study on the Implementation of a Biocatalytic Power-to-Gas Reactor in a  Brewery,” 2017.","short":"T. Broeker, M. Hoffarth, K. Heikrodt, J. Schneider, in: 2017.","bjps":"Broeker T et al. (2017) Study on the Implementation of a Biocatalytic Power-to-Gas Reactor in a  Brewery.","din1505-2-1":"Broeker, Timo ; Hoffarth, Marc ; Heikrodt, Klaus ; Schneider, Jan: Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery. In: , 2017","apa":"Broeker, T., Hoffarth, M., Heikrodt, K., & Schneider, J. (2017). Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery. 36th EBC Congress, Ljubljana (Slovenia).","mla":"Broeker, Timo, et al. Study on the Implementation of a Biocatalytic Power-to-Gas Reactor in a  Brewery. 2017.","van":"Broeker T, Hoffarth M, Heikrodt K, Schneider J. Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery. In 2017.","ama":"Broeker T, Hoffarth M, Heikrodt K, Schneider J. Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery. In: ; 2017.","ieee":"T. Broeker, M. Hoffarth, K. Heikrodt, and J. Schneider, “Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery,” presented at the 36th EBC Congress, Ljubljana (Slovenia), 2017.","havard":"T. Broeker, M. Hoffarth, K. Heikrodt, J. Schneider, Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery, in: 2017."},"title":"Study on the implementation of a biocatalytic power-to-gas reactor in a brewery","date_updated":"2024-05-22T15:28:31Z","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"year":"2017","user_id":"83779","status":"public","_id":"5580","conference":{"name":"36th EBC Congress","location":"Ljubljana (Slovenia)"}},{"date_updated":"2024-05-22T15:29:15Z","title":"Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik","citation":{"ama":"Conradi F, Wefing P. Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik. In: ; 2017.","van":"Conradi F, Wefing P. Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik. In 2017.","havard":"F. Conradi, P. Wefing, Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik, in: 2017.","ieee":"F. Conradi and P. Wefing, “Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik,” presented at the Studierendenkongress Junge DLG, Lemgo, 2017.","chicago":"Conradi, Florian, and Patrick Wefing. “Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik,” 2017.","chicago-de":"Conradi, Florian und Patrick Wefing. 2017. Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik. In: .","ufg":"Conradi, Florian/Wefing, Patrick: Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik, in: o. Hg.: o. O. 2017.","mla":"Conradi, Florian, and Patrick Wefing. Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik. 2017.","apa":"Conradi, F., & Wefing, P. (2017). Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik. Studierendenkongress Junge DLG, Lemgo.","din1505-2-1":"Conradi, Florian ; Wefing, Patrick: Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik. In: , 2017","short":"F. Conradi, P. Wefing, in: 2017.","bjps":"Conradi F and Wefing P (2017) Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik."},"language":[{"iso":"ger"}],"date_created":"2021-04-16T12:38:24Z","publication_status":"published","type":"conference","author":[{"full_name":"Conradi, Florian","id":"68967","last_name":"Conradi","first_name":"Florian"},{"first_name":"Patrick","id":"68976","last_name":"Wefing","full_name":"Wefing, Patrick"}],"conference":{"location":"Lemgo","name":"Studierendenkongress Junge DLG"},"_id":"5581","status":"public","user_id":"83779","year":"2017","department":[{"_id":"DEP4023"},{"_id":"DEP1308"},{"_id":"DEP4018"}]},{"author":[{"full_name":"Hoffarth, Marc","last_name":"Hoffarth","id":"52330","first_name":"Marc"}],"type":"conference_abstract","language":[{"iso":"ger"}],"date_created":"2021-04-16T12:44:28Z","publication_status":"published","citation":{"mla":"Hoffarth, Marc. Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen. 2017.","apa":"Hoffarth, M. (2017). Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen. Kolloquium Zukunftsenergien, Lemgo.","din1505-2-1":"Hoffarth, Marc: Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen. In: , 2017","bjps":"Hoffarth M (2017) Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen.","short":"M. Hoffarth, in: 2017.","chicago-de":"Hoffarth, Marc. 2017. Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen. In: .","chicago":"Hoffarth, Marc. “Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen,” 2017.","ufg":"Hoffarth, Marc: Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen, in: o. Hg.: o. O. 2017.","havard":"M. Hoffarth, Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen, in: 2017.","ieee":"M. Hoffarth, “Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen,” presented at the Kolloquium Zukunftsenergien, Lemgo, 2017.","ama":"Hoffarth M. Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen. In: ; 2017.","van":"Hoffarth M. Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen. In 2017."},"title":"Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen","date_updated":"2024-05-22T15:29:50Z","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"year":"2017","user_id":"83779","status":"public","_id":"5582","conference":{"name":"Kolloquium Zukunftsenergien","location":"Lemgo"}},{"date_updated":"2024-05-22T15:30:32Z","title":"Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas","type":"conference","author":[{"first_name":"Timo","last_name":"Broeker","id":"43927","full_name":"Broeker, Timo"}],"citation":{"chicago":"Broeker, Timo. “Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas,” 2017.","bjps":"Broeker T (2017) Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas.","din1505-2-1":"Broeker, Timo: Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas. In: , 2017","ama":"Broeker T. Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas. In: ; 2017.","van":"Broeker T. Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas. In 2017.","ieee":"T. Broeker, “Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas,” presented at the Internes Symposium “Umwelt und Ressourcen,” Lemgo, 2017.","ufg":"Broeker, Timo: Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas, in: o. Hg.: o. O. 2017.","chicago-de":"Broeker, Timo. 2017. Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas. In: .","short":"T. Broeker, in: 2017.","mla":"Broeker, Timo. Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas. 2017.","apa":"Broeker, T. (2017). Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas. Internes Symposium “Umwelt und Ressourcen,” Lemgo.","havard":"T. Broeker, Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas, in: 2017."},"publication_status":"published","date_created":"2021-04-16T12:45:47Z","language":[{"iso":"ger"}],"_id":"5583","conference":{"location":"Lemgo","name":"Internes Symposium \"Umwelt und Ressourcen\""},"user_id":"83779","year":"2017","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"status":"public"},{"_id":"5584","conference":{"location":"Gelsenkirchen","name":"Bioenergieforum NRW, EnergieAgentur NRW, "},"user_id":"83779","year":"2017","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"status":"public","date_updated":"2024-05-22T15:31:05Z","title":"bioCONNECT - Wasserstoff und biogenes CO2 im Verbund","author":[{"first_name":"Timo","last_name":"Broeker","id":"43927","full_name":"Broeker, Timo"}],"type":"conference","citation":{"ama":"Broeker T. bioCONNECT - Wasserstoff und biogenes CO2 im Verbund. In: ; 2017.","van":"Broeker T. bioCONNECT - Wasserstoff und biogenes CO2 im Verbund. In 2017.","ieee":"T. Broeker, “bioCONNECT - Wasserstoff und biogenes CO2 im Verbund,” presented at the Bioenergieforum NRW, EnergieAgentur NRW, , Gelsenkirchen, 2017.","chicago":"Broeker, Timo. “bioCONNECT - Wasserstoff und biogenes CO2 im Verbund,” 2017.","din1505-2-1":"Broeker, Timo: bioCONNECT - Wasserstoff und biogenes CO2 im Verbund. In: , 2017","bjps":"Broeker T (2017) bioCONNECT - Wasserstoff und biogenes CO2 im Verbund.","havard":"T. Broeker, bioCONNECT - Wasserstoff und biogenes CO2 im Verbund, in: 2017.","chicago-de":"Broeker, Timo. 2017. bioCONNECT - Wasserstoff und biogenes CO2 im Verbund. In: .","ufg":"Broeker, Timo: bioCONNECT - Wasserstoff und biogenes CO2 im Verbund, in: o. Hg.: o. O. 2017.","apa":"Broeker, T. (2017). bioCONNECT - Wasserstoff und biogenes CO2 im Verbund. Bioenergieforum NRW, EnergieAgentur NRW, , Gelsenkirchen.","mla":"Broeker, Timo. bioCONNECT - Wasserstoff und biogenes CO2 im Verbund. 2017.","short":"T. Broeker, in: 2017."},"publication_status":"published","language":[{"iso":"ger"}],"date_created":"2021-04-16T12:47:20Z"},{"year":"2017","user_id":"83779","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"status":"public","_id":"5585","conference":{"name":"European Congress of Applied Biotechnology (ECAB 4) & World Congress of Chemical Engineering (WCCE 10)","start_date":"2017-10-01","end_date":"2017-10-05","location":"Barcelona/Katalonia"},"author":[{"first_name":"Timo","full_name":"Broeker, Timo","last_name":"Broeker","id":"43927"},{"full_name":"Hoffarth, Marc","last_name":"Hoffarth","id":"52330","first_name":"Marc"},{"full_name":"Heikrodt, Klaus","id":"46269","last_name":"Heikrodt","first_name":"Klaus"},{"orcid":"0000-0001-6401-8873","first_name":"Jan","last_name":"Schneider","id":"13209","full_name":"Schneider, Jan"}],"type":"conference_abstract","citation":{"ieee":"T. Broeker, M. Hoffarth, K. Heikrodt, and J. Schneider, “Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery,” presented at the European Congress of Applied Biotechnology (ECAB 4) & World Congress of Chemical Engineering (WCCE 10), Barcelona/Katalonia, 2017.","van":"Broeker T, Hoffarth M, Heikrodt K, Schneider J. Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery. In 2017.","ama":"Broeker T, Hoffarth M, Heikrodt K, Schneider J. Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery. In: ; 2017.","bjps":"Broeker T et al. (2017) Study on the Implementation of a Biocatalytic Power-to-Gas Reactor in a  Brewery.","din1505-2-1":"Broeker, Timo ; Hoffarth, Marc ; Heikrodt, Klaus ; Schneider, Jan: Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery. In: , 2017","chicago":"Broeker, Timo, Marc Hoffarth, Klaus Heikrodt, and Jan Schneider. “Study on the Implementation of a Biocatalytic Power-to-Gas Reactor in a  Brewery,” 2017.","havard":"T. Broeker, M. Hoffarth, K. Heikrodt, J. Schneider, Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery, in: 2017.","short":"T. Broeker, M. Hoffarth, K. Heikrodt, J. Schneider, in: 2017.","mla":"Broeker, Timo, et al. Study on the Implementation of a Biocatalytic Power-to-Gas Reactor in a  Brewery. 2017.","apa":"Broeker, T., Hoffarth, M., Heikrodt, K., & Schneider, J. (2017). Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery. European Congress of Applied Biotechnology (ECAB 4) & World Congress of Chemical Engineering (WCCE 10), Barcelona/Katalonia.","ufg":"Broeker, Timo u. a.: Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery, in: o. Hg.: o. O. 2017.","chicago-de":"Broeker, Timo, Marc Hoffarth, Klaus Heikrodt und Jan Schneider. 2017. Study on the implementation of a biocatalytic power-to-gas reactor in a  brewery. In: ."},"language":[{"iso":"eng"}],"date_created":"2021-04-16T12:36:47Z","date_updated":"2024-05-22T15:31:39Z","title":"Study on the implementation of a biocatalytic power-to-gas reactor in a brewery"},{"title":"BeMobil: Developing a User-Friendly and Motivating Telesystem for Motor Rehabilitation after Stroke","date_updated":"2023-03-15T13:50:01Z","language":[{"iso":"eng"}],"date_created":"2021-04-21T15:13:48Z","citation":{"havard":"M. Minge, E. Ivanova, K. Lorenz, M. Thüring, J. Krüger, G. Joost, BeMobil: Developing a User-Friendly and Motivating Telesystem for Motor Rehabilitation after Stroke, in: 2017: pp. 870–875.","ieee":"M. Minge, E. Ivanova, K. Lorenz, M. Thüring, J. Krüger, and G. Joost, “BeMobil: Developing a User-Friendly and Motivating Telesystem for Motor Rehabilitation after Stroke,” presented at the International Conference on Rehabilitation Robotics, ICORR 2017, 2017, pp. 870–875.","ama":"Minge M, Ivanova E, Lorenz K, Thüring M, Krüger J, Joost G. BeMobil: Developing a User-Friendly and Motivating Telesystem for Motor Rehabilitation after Stroke. In: ; 2017:870-875.","van":"Minge M, Ivanova E, Lorenz K, Thüring M, Krüger J, Joost G. BeMobil: Developing a User-Friendly and Motivating Telesystem for Motor Rehabilitation after Stroke. In 2017. p. 870–5.","bjps":"Minge M et al. (2017) BeMobil: Developing a User-Friendly and Motivating Telesystem for Motor Rehabilitation after Stroke. pp. 870–875.","short":"M. Minge, E. Ivanova, K. Lorenz, M. Thüring, J. Krüger, G. Joost, in: 2017, pp. 870–875.","mla":"Minge, Michael, et al. BeMobil: Developing a User-Friendly and Motivating Telesystem for Motor Rehabilitation after Stroke. 2017, pp. 870–75.","apa":"Minge, M., Ivanova, E., Lorenz, K., Thüring, M., Krüger, J., & Joost, G. (2017). BeMobil: Developing a User-Friendly and Motivating Telesystem for Motor Rehabilitation after Stroke (pp. 870–875). Presented at the International Conference on Rehabilitation Robotics, ICORR 2017.","din1505-2-1":"Minge, Michael ; Ivanova, Ekaterina ; Lorenz, Katharina ; Thüring, Manfred ; Krüger, Jörg ; Joost, Gesche: BeMobil: Developing a User-Friendly and Motivating Telesystem for Motor Rehabilitation after Stroke. In: , 2017, S. 870–875","ufg":"Minge, Michael et. al. (2017): BeMobil: Developing a User-Friendly and Motivating Telesystem for Motor Rehabilitation after Stroke, in: , S. 870–875.","chicago":"Minge, Michael, Ekaterina Ivanova, Katharina Lorenz, Manfred Thüring, Jörg Krüger, and Gesche Joost. “BeMobil: Developing a User-Friendly and Motivating Telesystem for Motor Rehabilitation after Stroke,” 870–75, 2017.","chicago-de":"Minge, Michael, Ekaterina Ivanova, Katharina Lorenz, Manfred Thüring, Jörg Krüger und Gesche Joost. 2017. BeMobil: Developing a User-Friendly and Motivating Telesystem for Motor Rehabilitation after Stroke. In: , 870–875."},"publication_identifier":{"unknown":["978-1-5386-2295-7"]},"type":"conference","author":[{"orcid":"0000-0003-1930-7064","last_name":"Minge","id":"78302","full_name":"Minge, Michael","first_name":"Michael"},{"first_name":"Ekaterina","full_name":"Ivanova, Ekaterina","last_name":"Ivanova"},{"first_name":"Katharina","last_name":"Lorenz","full_name":"Lorenz, Katharina"},{"last_name":"Thüring","full_name":"Thüring, Manfred","first_name":"Manfred"},{"last_name":"Krüger","full_name":"Krüger, Jörg","first_name":"Jörg"},{"first_name":"Gesche","full_name":"Joost, Gesche","last_name":"Joost"}],"conference":{"name":"International Conference on Rehabilitation Robotics, ICORR 2017"},"page":"870-875","_id":"5677","status":"public","user_id":"15514","year":2017},{"year":2017,"user_id":"15514","department":[{"_id":"DEP1518"}],"status":"public","_id":"5678","conference":{"name":"British Conference on Human-Computer Interaction , BHCI 2017"},"type":"conference","author":[{"first_name":"Ekaterina","last_name":"Ivanova","full_name":"Ivanova, Ekaterina"},{"first_name":"Lorenz","last_name":"Katharina","full_name":"Katharina, Lorenz"},{"first_name":"Mareike","full_name":"Schrader, Mareike","last_name":"Schrader"},{"first_name":"Michael","full_name":"Minge, Michael","id":"78302","last_name":"Minge","orcid":"0000-0003-1930-7064"}],"citation":{"ufg":"Ivanova, Ekaterina et. al. (2017): Developing Motivating Visual Feedback for a Haptic Telesystem for Stroke Rehabilitation, in: .","chicago":"Ivanova, Ekaterina, Lorenz Katharina, Mareike Schrader, and Michael Minge. “Developing Motivating Visual Feedback for a Haptic Telesystem for Stroke Rehabilitation,” 2017.","chicago-de":"Ivanova, Ekaterina, Lorenz Katharina, Mareike Schrader und Michael Minge. 2017. Developing Motivating Visual Feedback for a Haptic Telesystem for Stroke Rehabilitation. In: .","short":"E. Ivanova, L. Katharina, M. Schrader, M. Minge, in: 2017.","bjps":"Ivanova E et al. (2017) Developing Motivating Visual Feedback for a Haptic Telesystem for Stroke Rehabilitation.","mla":"Ivanova, Ekaterina, et al. Developing Motivating Visual Feedback for a Haptic Telesystem for Stroke Rehabilitation. 2017.","apa":"Ivanova, E., Katharina, L., Schrader, M., & Minge, M. (2017). Developing Motivating Visual Feedback for a Haptic Telesystem for Stroke Rehabilitation. Presented at the British Conference on Human-Computer Interaction , BHCI 2017.","din1505-2-1":"Ivanova, Ekaterina ; Katharina, Lorenz ; Schrader, Mareike ; Minge, Michael: Developing Motivating Visual Feedback for a Haptic Telesystem for Stroke Rehabilitation. In: , 2017","ama":"Ivanova E, Katharina L, Schrader M, Minge M. Developing Motivating Visual Feedback for a Haptic Telesystem for Stroke Rehabilitation. In: ; 2017.","van":"Ivanova E, Katharina L, Schrader M, Minge M. Developing Motivating Visual Feedback for a Haptic Telesystem for Stroke Rehabilitation. In 2017.","havard":"E. Ivanova, L. Katharina, M. Schrader, M. Minge, Developing Motivating Visual Feedback for a Haptic Telesystem for Stroke Rehabilitation, in: 2017.","ieee":"E. Ivanova, L. Katharina, M. Schrader, and M. Minge, “Developing Motivating Visual Feedback for a Haptic Telesystem for Stroke Rehabilitation,” presented at the British Conference on Human-Computer Interaction , BHCI 2017, 2017."},"language":[{"iso":"eng"}],"date_created":"2021-04-21T18:56:00Z","date_updated":"2023-03-15T13:50:01Z","title":"Developing Motivating Visual Feedback for a Haptic Telesystem for Stroke Rehabilitation","quality_controlled":"1"},{"_id":"5679","conference":{"name":"Proceedings of the International Conference on Technically Assisted Rehabilitation, (TAR 2017)"},"page":"39-43","series_title":"Current Directions in Biomedical Engineering, 3(1)","user_id":"15514","year":2017,"status":"public","date_updated":"2023-03-15T13:50:01Z","quality_controlled":"1","title":" User-Centered Design of a Patient's Work Station for Haptic Robot-based Telerehabilitation after Stroke","author":[{"first_name":"Ekaterina","full_name":"Ivanova, Ekaterina","last_name":"Ivanova"},{"orcid":"0000-0003-1930-7064","first_name":"Michael","last_name":"Minge","id":"78302","full_name":"Minge, Michael"},{"last_name":"Schmidt","full_name":"Schmidt, Henning","first_name":"Henning"},{"first_name":"Manfred","last_name":"Thüring","full_name":"Thüring, Manfred"},{"last_name":"Krüger","full_name":"Krüger, Jörg","first_name":"Jörg"}],"type":"conference","citation":{"short":"E. Ivanova, M. Minge, H. Schmidt, M. Thüring, J. Krüger, (2017) 39–43.","apa":"Ivanova, E., Minge, M., Schmidt, H., Thüring, M., & Krüger, J. (2017). User-Centered Design of a Patient’s Work Station for Haptic Robot-based Telerehabilitation after Stroke. Presented at the Proceedings of the International Conference on Technically Assisted Rehabilitation, (TAR 2017).","mla":"Ivanova, Ekaterina, et al. User-Centered Design of a Patient’s Work Station for Haptic Robot-Based Telerehabilitation after Stroke. 2017, pp. 39–43.","ufg":"Ivanova, Ekaterina et. al. (2017): User-Centered Design of a Patient’s Work Station for Haptic Robot-based Telerehabilitation after Stroke (=Current Directions in Biomedical Engineering, 3(1)).","chicago-de":"Ivanova, Ekaterina, Michael Minge, Henning Schmidt, Manfred Thüring und Jörg Krüger. 2017. User-Centered Design of a Patient’s Work Station for Haptic Robot-based Telerehabilitation after Stroke. Current Directions in Biomedical Engineering, 3(1).","havard":"E. Ivanova, M. Minge, H. Schmidt, M. Thüring, J. Krüger, User-Centered Design of a Patient’s Work Station for Haptic Robot-based Telerehabilitation after Stroke, (2017) 39–43.","bjps":"Ivanova E et al. (2017) User-Centered Design of a Patient’s Work Station for Haptic Robot-Based Telerehabilitation after Stroke. 39–43.","din1505-2-1":"Ivanova, Ekaterina ; Minge, Michael ; Schmidt, Henning ; Thüring, Manfred ; Krüger, Jörg: User-Centered Design of a Patient’s Work Station for Haptic Robot-based Telerehabilitation after Stroke. In: , Current Directions in Biomedical Engineering, 3(1). (2017)","chicago":"Ivanova, Ekaterina, Michael Minge, Henning Schmidt, Manfred Thüring, and Jörg Krüger. “ User-Centered Design of a Patient’s Work Station for Haptic Robot-Based Telerehabilitation after Stroke.” Current Directions in Biomedical Engineering, 3(1), 2017.","ieee":"E. Ivanova, M. Minge, H. Schmidt, M. Thüring, and J. Krüger, “ User-Centered Design of a Patient’s Work Station for Haptic Robot-based Telerehabilitation after Stroke.” pp. 39–43, 2017.","van":"Ivanova E, Minge M, Schmidt H, Thüring M, Krüger J. User-Centered Design of a Patient’s Work Station for Haptic Robot-based Telerehabilitation after Stroke. 2017. p. 39–43. (Current Directions in Biomedical Engineering, 3(1)).","ama":"Ivanova E, Minge M, Schmidt H, Thüring M, Krüger J. User-Centered Design of a Patient’s Work Station for Haptic Robot-based Telerehabilitation after Stroke. 2017:39-43."},"date_created":"2021-04-21T19:28:08Z","language":[{"iso":"eng"}]},{"_id":"570","oa":"1","series_title":"Publication series in direct digital manufacturing ","publication":"Production Engineeringand Management","title":"Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models","main_file_link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","open_access":"1"}],"publication_identifier":{"isbn":["978-3-946856-01-6"]},"author":[{"full_name":"Scheideler, Eva","last_name":"Scheideler","id":"61522","first_name":"Eva"},{"first_name":"Andrea","full_name":"Huxol, Andrea","id":"43559","last_name":"Huxol"},{"last_name":"Villmer","id":"14290","full_name":"Villmer, Franz-Josef","first_name":"Franz-Josef"}],"publication_status":"published","language":[{"iso":"eng"}],"date_created":"2019-02-18T09:46:43Z","citation":{"apa":"Scheideler, E., Huxol, A., & Villmer, F.-J. (2017). Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineeringand Management (pp. 89–100). Lemgo.","mla":"Scheideler, Eva, et al. “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models.” Production Engineeringand Management, edited by Elio Padoano et al., no. 1, 2017, pp. 89–100.","short":"E. Scheideler, A. Huxol, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineeringand Management, Lemgo, 2017, pp. 89–100.","chicago-de":"Scheideler, Eva, Andrea Huxol und Franz-Josef Villmer. 2017. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Production Engineeringand Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 89–100. Publication series in direct digital manufacturing . Lemgo.","ufg":"Scheideler, Eva et. al. (2017): Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models, in: Elio Padoano et. al. (Hgg.): Production Engineeringand Management (=Publication series in direct digital manufacturing ), Lemgo, S. 89–100.","havard":"E. Scheideler, A. Huxol, F.-J. Villmer, Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineeringand Management, Lemgo, 2017: pp. 89–100.","din1505-2-1":"Scheideler, Eva ; Huxol, Andrea ; Villmer, Franz-Josef: Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineeringand Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 89–100","bjps":"Scheideler E, Huxol A and Villmer F-J (2017) Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineeringand Management. Lemgo, pp. 89–100.","chicago":"Scheideler, Eva, Andrea Huxol, and Franz-Josef Villmer. “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models.” In Production Engineeringand Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 89–100. Publication Series in Direct Digital Manufacturing . Lemgo, 2017.","ieee":"E. Scheideler, A. Huxol, and F.-J. Villmer, “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models,” in Production Engineeringand Management, Pordenone, Italy, 2017, no. 1, pp. 89–100.","van":"Scheideler E, Huxol A, Villmer F-J. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineeringand Management. Lemgo; 2017. p. 89–100. (Publication series in direct digital manufacturing ).","ama":"Scheideler E, Huxol A, Villmer F-J. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineeringand Management. Publication series in direct digital manufacturing . Lemgo; 2017:89-100."},"place":"Lemgo","keyword":["Nondestructive quality control","Predictive analytics","Metal model","Additive manufacturing"],"page":"89-100","conference":{"location":"Pordenone, Italy","start_date":"2017-09-28","end_date":"2017-09-29","name":"Proceedings7th International Conference"},"abstract":[{"text":"Additive manufacturing (AM) has matured rapidly during the last years due to the advancement of AM machines and materials. Nevertheless, the widespread adoption of AM is still challenged by producing parts with reliable quality. The aim of this paper is t o introduce a first approach to apply in-situ monitoring for quality evaluation of produced parts. Based on the monitored data, a model is developed, in order to predict the quality of ready built parts.","lang":"eng"}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"department":[{"_id":"DEP1306"}],"user_id":"45673","year":2017,"status":"public","issue":"1","related_material":{"link":[{"relation":"contains","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf"}]},"date_updated":"2023-03-15T13:50:01Z","type":"conference","editor":[{"first_name":"Elio","last_name":"Padoano","full_name":"Padoano, Elio"},{"last_name":"Villmer","full_name":"Villmer, Franz-Josef","first_name":"Franz-Josef"}]},{"conference":{"location":"Hawaii","name":"Proceedings of the 50th Hawaii International Conference on System Sciences (HICSS)"},"_id":"5714","status":"public","department":[{"_id":"DEP1523"}],"user_id":"79078","year":2017,"title":"Moderation of Enterprise Social Networks - A Literature Review from a Corporate Perspective","date_updated":"2023-03-15T13:50:01Z","date_created":"2021-04-28T08:33:24Z","language":[{"iso":"eng"}],"citation":{"havard":"F. Nolte, N. Guhr, M.H. Breitner, Moderation of Enterprise Social Networks - A Literature Review from a Corporate Perspective, in: 2017.","ieee":"F. Nolte, N. Guhr, and M. H. Breitner, “Moderation of Enterprise Social Networks - A Literature Review from a Corporate Perspective,” presented at the Proceedings of the 50th Hawaii International Conference on System Sciences (HICSS), Hawaii, 2017.","ama":"Nolte F, Guhr N, Breitner MH. Moderation of Enterprise Social Networks - A Literature Review from a Corporate Perspective. In: ; 2017.","van":"Nolte F, Guhr N, Breitner MH. Moderation of Enterprise Social Networks - A Literature Review from a Corporate Perspective. In 2017.","bjps":"Nolte F, Guhr N and Breitner MH (2017) Moderation of Enterprise Social Networks - A Literature Review from a Corporate Perspective.","short":"F. Nolte, N. Guhr, M.H. Breitner, in: 2017.","mla":"Nolte, Ferry, et al. Moderation of Enterprise Social Networks - A Literature Review from a Corporate Perspective. 2017.","apa":"Nolte, F., Guhr, N., & Breitner, M. H. (2017). Moderation of Enterprise Social Networks - A Literature Review from a Corporate Perspective. Presented at the Proceedings of the 50th Hawaii International Conference on System Sciences (HICSS), Hawaii.","din1505-2-1":"Nolte, Ferry ; Guhr, Nadine ; Breitner, M.H.: Moderation of Enterprise Social Networks - A Literature Review from a Corporate Perspective. In: , 2017","ufg":"Nolte, Ferry et. al. (2017): Moderation of Enterprise Social Networks - A Literature Review from a Corporate Perspective, in: .","chicago-de":"Nolte, Ferry, Nadine Guhr und M.H. Breitner. 2017. Moderation of Enterprise Social Networks - A Literature Review from a Corporate Perspective. In: .","chicago":"Nolte, Ferry, Nadine Guhr, and M.H. Breitner. “Moderation of Enterprise Social Networks - A Literature Review from a Corporate Perspective,” 2017."},"type":"conference","author":[{"first_name":"Ferry","full_name":"Nolte, Ferry","last_name":"Nolte"},{"last_name":"Guhr","id":"77748","full_name":"Guhr, Nadine","first_name":"Nadine"},{"first_name":"M.H.","full_name":"Breitner, M.H.","last_name":"Breitner"}]},{"type":"conference","editor":[{"first_name":"Elio","full_name":"Padoano, Elio","last_name":"Padoano"},{"first_name":"Franz-Josef","last_name":"Villmer","id":"14290","full_name":"Villmer, Franz-Josef"}],"issue":"1","related_material":{"link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","relation":"contains"}]},"quality_controlled":"1","date_updated":"2024-04-19T12:58:56Z","department":[{"_id":"DEP1306"},{"_id":"DEP5020"},{"_id":"DEP5000"},{"_id":"DEP6020"}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"user_id":"51864","year":"2017","status":"public","keyword":["Additive manufacturing","Embedded optical waveguides","Electrical conductors","Embedded systems","FLM technology","Sensors"],"extern":"1","page":"127-136","conference":{"name":"Proceedings7th International Conference","start_date":"2017-09-28","end_date":"2017-09-29","location":"Pordenone, Italy"},"abstract":[{"lang":"eng","text":"Additive manufacturing (AM) technologies have not only revolutionized product development and design by enabling rapid prototyping. They also gained influence on production in general, mainly because of their direct manufacturing capabilities. In the context of Industry 4.0 and the related process automation, innovative and advanced production technologies with completely new approaches are required [1]. AM technologies contribute to this with their advantages like freedom of design, cost efficient product individualization, and functional integration. On the other hand, AM still shows shortcomings in exploiting its full potential. Most current AM technologies are only applicable for manufacturing with singular materials. In particular, opportunities for processing of optically or electrically conductive materials are still missing. This paper contributes to the advancement of additive manufacturing of two different material variants or even two completely different materials. A special focus is laid on producing a part that combines mechanical with optical or electrical functionalities in one process step. The ultimate goal is to integrate sensor functionalities into an AM object, e.g. strain gauges. Extrusion processes, predominantly Fused Layer Modeling (FLM), are preferred in this research due to their mechanically simple machine setup in which additional functional materials can be adapted easily to the build process. In a first step, the general manufacturability has been evaluated. Thereafter, the resulting optical transmission properties have been analyzed. Especially the attenuation has to remain below a threshold value to accomplish a minimum signal-to-noise ratio."}],"publication_identifier":{"isbn":["978-3-946856-01-6"]},"author":[{"first_name":"Patrick","id":"62091","last_name":"Ehlert","full_name":"Ehlert, Patrick"},{"first_name":"Oliver","last_name":"Stübbe","id":"51864","full_name":"Stübbe, Oliver","orcid":"https://orcid.org/0000-0001-7293-6893"},{"first_name":"Franz-Josef","id":"14290","last_name":"Villmer","full_name":"Villmer, Franz-Josef"}],"language":[{"iso":"eng"}],"date_created":"2019-02-18T11:16:07Z","publication_status":"published","place":"Lemgo","citation":{"ieee":"P. Ehlert, O. Stübbe, and F.-J. Villmer, “Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 127–136.","havard":"P. Ehlert, O. Stübbe, F.-J. Villmer, Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 127–136.","van":"Ehlert P, Stübbe O, Villmer FJ. Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production Engineering and Management. Lemgo; 2017. p. 127–36. (Publication series in direct digital manufacturing ).","ama":"Ehlert P, Stübbe O, Villmer FJ. Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management. Publication series in direct digital manufacturing . ; 2017:127-136.","din1505-2-1":"Ehlert, Patrick ; Stübbe, Oliver ; Villmer, Franz-Josef: Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production Engineering and Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 127–136","apa":"Ehlert, P., Stübbe, O., & Villmer, F.-J. (2017). Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management (Issue 1, pp. 127–136).","mla":"Ehlert, Patrick, et al. “Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 127–36.","short":"P. Ehlert, O. Stübbe, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 127–136.","bjps":"Ehlert P, Stübbe O and Villmer F-J (2017) Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In Padoano E et al. (eds), Production Engineering and Management. Lemgo, pp. 127–136.","chicago-de":"Ehlert, Patrick, Oliver Stübbe und Franz-Josef Villmer. 2017. Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 127–136. Publication series in direct digital manufacturing . Lemgo.","chicago":"Ehlert, Patrick, Oliver Stübbe, and Franz-Josef Villmer. “Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 127–36. Publication Series in Direct Digital Manufacturing . Lemgo, 2017.","ufg":"Ehlert, Patrick/Stübbe, Oliver/Villmer, Franz-Josef: Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology, in: Padoano, Elio u. a. (Hgg.): Production Engineering and Management, Lemgo 2017 (Publication series in direct digital manufacturing ),  S. 127–136."},"title":"Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology","main_file_link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","open_access":"1"}],"series_title":"Publication series in direct digital manufacturing ","publication":"Production Engineering and Management","oa":"1","_id":"573"},{"oa":"1","_id":"5739","popular_science":"1","publication":"urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung","main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63562637/urbanlab-magazin-2017-die-stadt-der-zukunft"}],"has_accepted_license":"1","title":"Human Centered Design. Wie Architektur unser Verhalten beeinflusst","author":[{"orcid":"0000-0002-8841-9345","last_name":"Cardinali","id":"58462","full_name":"Cardinali, Marcel","first_name":"Marcel"}],"publication_identifier":{"issn":["2566-8900"]},"ddc":["050"],"citation":{"mla":"Cardinali, Marcel. “Human Centered Design. Wie Architektur unser Verhalten beeinflusst.” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2, Technische Hochschule Ostwestfalen-Lippe, 2017, pp. 28–31.","apa":"Cardinali, M. (2017). Human Centered Design. Wie Architektur unser Verhalten beeinflusst. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, (2), 28–31.","short":"M. Cardinali, urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2017) 28–31.","chicago-de":"Cardinali, Marcel. 2017. Human Centered Design. Wie Architektur unser Verhalten beeinflusst. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, Nr. 2: 28–31.","ufg":"Cardinali, Marcel (2017): Human Centered Design. Wie Architektur unser Verhalten beeinflusst, in: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2), S. 28–31.","havard":"M. Cardinali, Human Centered Design. Wie Architektur unser Verhalten beeinflusst, urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. (2017) 28–31.","din1505-2-1":"Cardinali, Marcel: Human Centered Design. Wie Architektur unser Verhalten beeinflusst. In: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. Detmold, Technische Hochschule Ostwestfalen-Lippe (2017), Nr. 2, S. 28–31","bjps":"Cardinali M (2017) Human Centered Design. Wie Architektur unser Verhalten beeinflusst. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung 28–31.","chicago":"Cardinali, Marcel. “Human Centered Design. Wie Architektur unser Verhalten beeinflusst.” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2 (2017): 28–31.","ieee":"M. Cardinali, “Human Centered Design. Wie Architektur unser Verhalten beeinflusst,” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2, pp. 28–31, 2017.","ama":"Cardinali M. Human Centered Design. Wie Architektur unser Verhalten beeinflusst. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(2):28-31.","van":"Cardinali M. Human Centered Design. Wie Architektur unser Verhalten beeinflusst. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(2):28–31."},"place":"Detmold","publication_status":"published","language":[{"iso":"ger"}],"date_created":"2021-04-30T12:41:51Z","file":[{"success":1,"relation":"main_file","content_type":"application/pdf","file_name":"Human Centered Design-Wie Architektur unsere Verhalten beeinflusst.pdf","creator":"edu-dd0","date_updated":"2021-05-02T11:36:57Z","access_level":"open_access","date_created":"2021-05-02T11:36:57Z","file_id":"5770","file_size":2828864}],"abstract":[{"text":"Das Thema Gesundheit wird traditionell eher aus gesundheitswissenschaft- licher und medizinischer Perspektive betrachtet und untersucht. Nun sind es aber Architekten, Stadtplaner und andere planende Disziplinen, die unsere tägliche Lebenswelt formen. Mit dem Ansatz des Human Centered Design, wird diese Verantwortung gewürdigt und Einwirkungen und Auswirkungen der gebauten Umwelt auf den Menschen, auf unsere Gesundheit und auf unser Wohlempfinden aufgezeigt.","lang":"ger"}],"page":"28-31","user_id":"65039","year":2017,"department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"status":"public","issue":"2","date_updated":"2023-03-15T13:50:01Z","file_date_updated":"2021-05-02T11:36:57Z","type":"journal_article","publisher":"Technische Hochschule Ostwestfalen-Lippe"},{"oa":"1","_id":"574","publication":"Production Engineering and Management","main_file_link":[{"open_access":"1","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf"}],"title":"Extending the Sliced V-Model to Smart Product Development","author":[{"first_name":"Andreas","id":"62088","last_name":"Deuter","full_name":"Deuter, Andreas"},{"first_name":"Andreas","last_name":"Otte","id":"51466","full_name":"Otte, Andreas"},{"first_name":"Marcel","id":"52288","last_name":"Ebert","full_name":"Ebert, Marcel"}],"publication_identifier":{"isbn":["978-3-946856-01-6"]},"citation":{"ieee":"A. Deuter, A. Otte, and M. Ebert, “Extending the Sliced V-Model to Smart Product Development,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 115–125.","van":"Deuter A, Otte A, Ebert M. Extending the Sliced V-Model to Smart Product Development. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 115–25.","ama":"Deuter A, Otte A, Ebert M. Extending the Sliced V-Model to Smart Product Development. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2017:115-125.","bjps":"Deuter A, Otte A and Ebert M (2017) Extending the Sliced V-Model to Smart Product Development. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 115–125.","din1505-2-1":"Deuter, Andreas ; Otte, Andreas ; Ebert, Marcel: Extending the Sliced V-Model to Smart Product Development. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2017, S. 115–125","chicago":"Deuter, Andreas, Andreas Otte, and Marcel Ebert. “Extending the Sliced V-Model to Smart Product Development.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 115–25. Lemgo, 2017.","havard":"A. Deuter, A. Otte, M. Ebert, Extending the Sliced V-Model to Smart Product Development, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 115–125.","short":"A. Deuter, A. Otte, M. Ebert, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 115–125.","mla":"Deuter, Andreas, et al. “Extending the Sliced V-Model to Smart Product Development.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 115–25.","apa":"Deuter, A., Otte, A., & Ebert, M. (2017). Extending the Sliced V-Model to Smart Product Development. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 115–125). Lemgo.","ufg":"Deuter, Andreas et. al. (2017): Extending the Sliced V-Model to Smart Product Development, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 115–125.","chicago-de":"Deuter, Andreas, Andreas Otte und Marcel Ebert. 2017. Extending the Sliced V-Model to Smart Product Development. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 115–125. Lemgo."},"place":"Lemgo","publication_status":"published","date_created":"2019-02-18T11:34:36Z","language":[{"iso":"eng"}],"keyword":["PLM","ALM","Systems Engineering","VDI guideline 2206"],"abstract":[{"text":"The increasing industrial digitization is the driver for the fast emergence of many industrial smart products. To stay competitive, the manufacturing companies of these smart products need to optimize their internal lifecycleprocesses. Mainly, they have to converge the software and hardware lifecycleprocesses. However, even if this strategic necessity has been recognized, manufacturing companies struggle to develop and implement a roadmap of such convergence.Starting point for the realization of harmonized lifecycle processes are processmodels describing process activities and the underlying data models. This research addresses the latter one and aims to create a generic lifecycle data model. The research team created and evaluated such data model referring to development artifacts such as requirements, parts or test cases and to lifecycle artifacts such as revisions, versions and baselines. The generic lifecycle management model was evaluated by a practical development of a smart product. By this, the research provides a valuable result to maintain and increase the competitiveness of manufacturing companies.","lang":"eng"}],"conference":{"location":"Pordenone, Italy","name":"Proceedings 7th International Conference","end_date":"2017-09-29","start_date":"2017-09-28"},"page":"115-125","user_id":"62088","year":2017,"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"department":[{"_id":"DEP1306"},{"_id":"DEP7022"}],"status":"public","related_material":{"link":[{"relation":"contains","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf"}]},"issue":"1","date_updated":"2023-03-15T13:50:01Z","type":"conference","editor":[{"first_name":"Elio","full_name":"Padoano, Elio","last_name":"Padoano"},{"first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","last_name":"Villmer"}]},{"date_updated":"2023-03-15T13:50:01Z","main_file_link":[{"url":"https://www.nrwbank.de/export/sites/nrwbank/de/corporate/downloads/wohnraumfoerderung/Ideenbuch-NRWBANK-Studierendenwettbewerb.pdf"}],"title":" Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb.","type":"journal_article","author":[{"first_name":"Oliver","id":"27136","last_name":"Hall","full_name":"Hall, Oliver"},{"first_name":"Marcel","full_name":"Cardinali, Marcel","id":"58462","last_name":"Cardinali","orcid":"0000-0002-8841-9345"}],"citation":{"din1505-2-1":"Hall, Oliver ; Cardinali, Marcel: Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb. In: Ideenbuch Wachstum in Kooperation. Düsseldorf, NRW.BANK (2017), S. 92–95","bjps":"Hall O and Cardinali M (2017) Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb. Ideenbuch Wachstum in Kooperation 92–95.","chicago":"Hall, Oliver, and Marcel Cardinali. “ Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb.” Ideenbuch Wachstum in Kooperation, 2017, 92–95.","ieee":"O. Hall and M. Cardinali, “ Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb.,” Ideenbuch Wachstum in Kooperation, pp. 92–95, 2017.","ama":"Hall O, Cardinali M. Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb. Ideenbuch Wachstum in Kooperation. 2017:92-95.","van":"Hall O, Cardinali M. Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb. Ideenbuch Wachstum in Kooperation. 2017;92–5.","apa":"Hall, O., & Cardinali, M. (2017). Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb. Ideenbuch Wachstum in Kooperation, 92–95.","mla":"Hall, Oliver, and Marcel Cardinali. “ Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb.” Ideenbuch Wachstum in Kooperation, NRW.BANK, 2017, pp. 92–95.","short":"O. Hall, M. Cardinali, Ideenbuch Wachstum in Kooperation (2017) 92–95.","chicago-de":"Hall, Oliver und Marcel Cardinali. 2017. Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb. Ideenbuch Wachstum in Kooperation: 92–95.","ufg":"Hall, Oliver/Cardinali, Marcel (2017): Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb., in: Ideenbuch Wachstum in Kooperation, S. 92–95.","havard":"O. Hall, M. Cardinali, Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb., Ideenbuch Wachstum in Kooperation. (2017) 92–95."},"place":"Düsseldorf","publication_status":"published","date_created":"2021-04-30T12:41:52Z","publisher":"NRW.BANK","language":[{"iso":"ger"}],"_id":"5740","abstract":[{"lang":"ger","text":"Zweitveröffentlichung in urbanlab Magazin Regionale Netzwerke, 12–15."}],"page":"92-95","popular_science":"1","year":2017,"user_id":"45673","department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"status":"public","publication":"Ideenbuch Wachstum in Kooperation"},{"issue":"2","date_updated":"2023-03-15T13:50:01Z","type":"journal_article","publisher":"Technische Hochschule Ostwestfalen-Lippe","keyword":["Studentischer Ideenwettbewerb"],"page":"60-63","user_id":"45673","year":2017,"department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"status":"public","main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63562637/urbanlab-magazin-2017-die-stadt-der-zukunft","open_access":"1"}],"title":"Quartier der Zukunft - Wettbewerbsdokumentation","author":[{"first_name":"Oliver","full_name":"Hall, Oliver","id":"27136","last_name":"Hall"},{"orcid":"0000-0002-8841-9345","id":"58462","last_name":"Cardinali","full_name":"Cardinali, Marcel","first_name":"Marcel"}],"publication_identifier":{"unknown":["2566-8900"]},"citation":{"ieee":"O. Hall and M. Cardinali, “Quartier der Zukunft - Wettbewerbsdokumentation,” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2, pp. 60–63, 2017.","van":"Hall O, Cardinali M. Quartier der Zukunft - Wettbewerbsdokumentation. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(2):60–3.","ama":"Hall O, Cardinali M. Quartier der Zukunft - Wettbewerbsdokumentation. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(2):60-63.","bjps":"Hall O and Cardinali M (2017) Quartier der Zukunft - Wettbewerbsdokumentation. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung 60–63.","din1505-2-1":"Hall, Oliver ; Cardinali, Marcel: Quartier der Zukunft - Wettbewerbsdokumentation. In: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. Detmold, Technische Hochschule Ostwestfalen-Lippe (2017), Nr. 2, S. 60–63","chicago":"Hall, Oliver, and Marcel Cardinali. “Quartier der Zukunft - Wettbewerbsdokumentation.” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2 (2017): 60–63.","havard":"O. Hall, M. Cardinali, Quartier der Zukunft - Wettbewerbsdokumentation, urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. (2017) 60–63.","short":"O. Hall, M. Cardinali, urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2017) 60–63.","mla":"Hall, Oliver, and Marcel Cardinali. “Quartier der Zukunft - Wettbewerbsdokumentation.” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2, Technische Hochschule Ostwestfalen-Lippe, 2017, pp. 60–63.","apa":"Hall, O., & Cardinali, M. (2017). Quartier der Zukunft - Wettbewerbsdokumentation. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, (2), 60–63.","ufg":"Hall, Oliver/Cardinali, Marcel (2017): Quartier der Zukunft - Wettbewerbsdokumentation, in: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2), S. 60–63.","chicago-de":"Hall, Oliver und Marcel Cardinali. 2017. Quartier der Zukunft - Wettbewerbsdokumentation. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, Nr. 2: 60–63."},"place":"Detmold","publication_status":"published","date_created":"2021-04-30T12:41:54Z","language":[{"iso":"ger"}],"_id":"5741","oa":"1","popular_science":"1","publication":"urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung"},{"abstract":[{"text":"Der vorliegende Artikel beleuchtet die Bedeutung von sozial heterogenen Quar- tieren zur Verhinderung von Armutsrepdroduktion. In diesem Zusammenhang werden Unterschiede und Gemeinsamkeiten von Sozialraum und Quartiers- raum bei verschiedenen Gruppen herausgestellt. Daraus folgt, dass insbesonde- re Kinder und Jugendliche von einer heterogenen Quartierszusammensetzung profitieren. Die Analyse der Abläufe und Abhängigkeiten der Problemstellungen im Quartier zeigt schließlich, dass die Interventionspunkte des Programms So- ziale Stadt zwar richtig erkannt wurden, aber allein nicht geeignet sind einen Weg aus der Daueraufgabe Soziale Stadt zu ermöglichen. So zeigt sich, dass es der Ressourcen anderer Milieus bedarf, um die Armutsfalle benachteiligter Quartiere aufzulösen.","lang":"ger"}],"page":"50-55","file":[{"date_created":"2021-05-02T11:24:58Z","file_id":"5765","file_size":1275426,"creator":"edu-dd0","date_updated":"2021-05-02T11:24:58Z","access_level":"open_access","success":1,"relation":"main_file","content_type":"application/pdf","file_name":"Milieus und ihre Wohnanforderungen.pdf"}],"keyword":["benachteiligte Quartiere","Sozialraum","Soziale Stadt","Wohnanforderungen"],"status":"public","user_id":"45673","year":2017,"department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"date_updated":"2023-03-15T13:50:01Z","file_date_updated":"2021-05-02T11:24:58Z","issue":"2","publisher":"Technische Hochschule Ostwestfalen-Lippe","type":"journal_article","popular_science":"1","oa":"1","_id":"5742","publication":"urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung","main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63562600/urbanlab-magazin-08-2018-heimat-planen","open_access":"1"}],"title":"Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss","has_accepted_license":"1","place":"Detmold","citation":{"van":"Cardinali M. Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss. urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(2):50–5.","ama":"Cardinali M. Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss. urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(2):50-55.","ieee":"M. Cardinali, “Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss,” urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2, pp. 50–55, 2017.","havard":"M. Cardinali, Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss, urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. (2017) 50–55.","chicago-de":"Cardinali, Marcel. 2017. Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss. urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, Nr. 2: 50–55.","chicago":"Cardinali, Marcel. “Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss.” urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2 (2017): 50–55.","ufg":"Cardinali, Marcel (2017): Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss, in: urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2), S. 50–55.","din1505-2-1":"Cardinali, Marcel: Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss. In: urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. Detmold, Technische Hochschule Ostwestfalen-Lippe (2017), Nr. 2, S. 50–55","mla":"Cardinali, Marcel. “Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss.” urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2, Technische Hochschule Ostwestfalen-Lippe, 2017, pp. 50–55.","apa":"Cardinali, M. (2017). Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss. urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, (2), 50–55.","short":"M. Cardinali, urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2017) 50–55.","bjps":"Cardinali M (2017) Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss. urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung 50–55."},"date_created":"2021-04-30T12:41:55Z","language":[{"iso":"ger"}],"publication_status":"published","author":[{"orcid":"0000-0002-8841-9345","id":"58462","last_name":"Cardinali","full_name":"Cardinali, Marcel","first_name":"Marcel"}],"publication_identifier":{"unknown":["2566-8900"]},"ddc":["050"]},{"popular_science":"1","_id":"5743","oa":"1","publication":"urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung","title":"Städte und Regionen verändern sich (Editorial)","has_accepted_license":"1","main_file_link":[{"open_access":"1","url":"https://www.yumpu.com/de/document/read/63562637/urbanlab-magazin-2017-die-stadt-der-zukunft"}],"publication_status":"published","date_created":"2021-04-30T12:41:57Z","language":[{"iso":"ger"}],"citation":{"chicago":"Cardinali, Marcel, and Oliver Hall. “Städte und Regionen verändern sich (Editorial).” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 3 (2017): 3.","bjps":"Cardinali M and Hall O (2017) Städte und Regionen verändern sich (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung 3.","din1505-2-1":"Cardinali, Marcel ; Hall, Oliver: Städte und Regionen verändern sich (Editorial). In: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2017), Nr. 3, S. 3","van":"Cardinali M, Hall O. Städte und Regionen verändern sich (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(3):3.","ama":"Cardinali M, Hall O. Städte und Regionen verändern sich (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(3):3.","ieee":"M. Cardinali and O. Hall, “Städte und Regionen verändern sich (Editorial),” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 3, p. 3, 2017.","ufg":"Cardinali, Marcel/Hall, Oliver (2017): Städte und Regionen verändern sich (Editorial), in: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (3), S. 3.","chicago-de":"Cardinali, Marcel und Oliver Hall. 2017. Städte und Regionen verändern sich (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, Nr. 3: 3.","short":"M. Cardinali, O. Hall, urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2017) 3.","apa":"Cardinali, M., & Hall, O. (2017). Städte und Regionen verändern sich (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, (3), 3.","mla":"Cardinali, Marcel, and Oliver Hall. “Städte und Regionen verändern sich (Editorial).” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 3, 2017, p. 3.","havard":"M. Cardinali, O. Hall, Städte und Regionen verändern sich (Editorial), urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. (2017) 3."},"ddc":["050"],"publication_identifier":{"issn":["2566-8900"]},"author":[{"first_name":"Marcel","full_name":"Cardinali, Marcel","last_name":"Cardinali","id":"58462","orcid":"0000-0002-8841-9345"},{"last_name":"Hall","id":"27136","full_name":"Hall, Oliver","first_name":"Oliver"}],"page":"3","file":[{"content_type":"application/pdf","file_name":"Editorial Stadt der Zukunft.pdf","success":1,"relation":"main_file","date_updated":"2021-04-30T15:04:54Z","access_level":"open_access","creator":"edu-dd0","file_id":"5754","file_size":62725,"date_created":"2021-04-30T15:04:54Z"}],"status":"public","department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"user_id":"45673","year":2017,"file_date_updated":"2021-04-30T15:04:54Z","date_updated":"2023-03-15T13:50:01Z","issue":"3","type":"journal_article"},{"issue":"1","related_material":{"link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","relation":"contains"}]},"date_updated":"2023-03-15T13:50:01Z","type":"conference","editor":[{"first_name":"Elio","last_name":"Padoano","full_name":"Padoano, Elio"},{"first_name":"Franz-Josef","last_name":"Villmer","full_name":"Villmer, Franz-Josef"}],"keyword":["Tool making","Direct rapid tooling","Additively manufactured molds","Selective laser melting","Additive manufacturing process chain","Post-processing"],"abstract":[{"text":"Additive manufacturing technologies can provide cost and time advantages in mold making, compared to traditional approaches. Nevertheless, their applicability is not yet completely proven, especially in terms of surface finishing. The aim of this research work is to create perfect mold inserts by Selective Laser Melting (SLM) and to optimize surface quality. Therefore a process is developed to reduce the effort of surface quality optimization including a high flexibility in design. The tested process shows that simple and affordable methods can lead to usable molds with only minor restrictions in terms of appearance. Due to the initial reduction of layer thicknesses and distinct settings of laser melting parameters, the surface smoothness is significantly enhanced during the SLM building process. Subsequently blasting, manual grinding, as well as polishing operations, enable a selective smoothening of the surface up to a polished finish. As a result, the built tool parts can be used instantly for injection molding.","lang":"eng"}],"conference":{"name":"Proceedings7th International Conference","end_date":"2017-09-29","start_date":"2017-09-28","location":"Pordenone, Italy"},"page":"101-113","year":2017,"user_id":"45673","corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"department":[{"_id":"DEP1306"}],"status":"public","main_file_link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","open_access":"1"}],"title":"SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization","author":[{"full_name":"Elstermeyer, O.","last_name":"Elstermeyer","first_name":"O."},{"last_name":"Villmer","id":"14290","full_name":"Villmer, Franz-Josef","first_name":"Franz-Josef"}],"publication_identifier":{"isbn":["978-3-946856-01-6"]},"citation":{"van":"Elstermeyer O, Villmer F-J. SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 101–13. (Publication series in direct digital manufacturing ).","ama":"Elstermeyer O, Villmer F-J. SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Publication series in direct digital manufacturing . Lemgo; 2017:101-113.","ieee":"O. Elstermeyer and F.-J. Villmer, “SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 101–113.","havard":"O. Elstermeyer, F.-J. Villmer, SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 101–113.","ufg":"Elstermeyer, O./Villmer, Franz-Josef (2017): SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management (=Publication series in direct digital manufacturing ), Lemgo, S. 101–113.","chicago":"Elstermeyer, O., and Franz-Josef Villmer. “SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 101–13. Publication Series in Direct Digital Manufacturing . Lemgo, 2017.","chicago-de":"Elstermeyer, O. und Franz-Josef Villmer. 2017. SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 101–113. Publication series in direct digital manufacturing . Lemgo.","short":"O. Elstermeyer, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 101–113.","bjps":"Elstermeyer O and Villmer F-J (2017) SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 101–113.","din1505-2-1":"Elstermeyer, O. ; Villmer, Franz-Josef: SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 101–113","apa":"Elstermeyer, O., & Villmer, F.-J. (2017). SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 101–113). Lemgo.","mla":"Elstermeyer, O., and Franz-Josef Villmer. “SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 101–13."},"place":"Lemgo","publication_status":"published","date_created":"2019-02-18T11:16:07Z","language":[{"iso":"eng"}],"oa":"1","_id":"575","series_title":"Publication series in direct digital manufacturing ","publication":"Production Engineering and Management"},{"publication":"urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung","popular_science":"1","_id":"5750","oa":"1","language":[{"iso":"ger"}],"date_created":"2021-04-30T12:42:08Z","publication_status":"published","place":"Detmold","citation":{"havard":"M. Cardinali, O. Hall, Die Stadt der Zukunft (Editorial), urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. (2017) 3.","mla":"Cardinali, Marcel, and Oliver Hall. “Die Stadt der Zukunft (Editorial).” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2, Technische Hochschule Ostwestfalen-Lippe, 2017, p. 3.","apa":"Cardinali, M., & Hall, O. (2017). Die Stadt der Zukunft (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, (2), 3.","short":"M. Cardinali, O. Hall, urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2017) 3.","chicago-de":"Cardinali, Marcel und Oliver Hall. 2017. Die Stadt der Zukunft (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, Nr. 2: 3.","ufg":"Cardinali, Marcel/Hall, Oliver (2017): Die Stadt der Zukunft (Editorial), in: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2), S. 3.","ieee":"M. Cardinali and O. Hall, “Die Stadt der Zukunft (Editorial),” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2, p. 3, 2017.","van":"Cardinali M, Hall O. Die Stadt der Zukunft (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(2):3.","ama":"Cardinali M, Hall O. Die Stadt der Zukunft (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(2):3.","din1505-2-1":"Cardinali, Marcel ; Hall, Oliver: Die Stadt der Zukunft (Editorial). In: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. Detmold, Technische Hochschule Ostwestfalen-Lippe (2017), Nr. 2, S. 3","bjps":"Cardinali M and Hall O (2017) Die Stadt der Zukunft (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung 3.","chicago":"Cardinali, Marcel, and Oliver Hall. “Die Stadt der Zukunft (Editorial).” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2 (2017): 3."},"ddc":["050"],"publication_identifier":{"issn":["2566-8900"]},"author":[{"full_name":"Cardinali, Marcel","last_name":"Cardinali","id":"58462","first_name":"Marcel","orcid":"0000-0002-8841-9345"},{"first_name":"Oliver","id":"27136","last_name":"Hall","full_name":"Hall, Oliver"}],"title":"Die Stadt der Zukunft (Editorial)","has_accepted_license":"1","main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63562637/urbanlab-magazin-2017-die-stadt-der-zukunft","open_access":"1"}],"status":"public","department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"user_id":"45673","year":2017,"page":"3","file":[{"content_type":"application/pdf","file_name":"Editorial Stadt der Zukunft.pdf","relation":"main_file","success":1,"access_level":"open_access","date_updated":"2021-04-30T14:41:29Z","creator":"edu-dd0","file_size":62725,"file_id":"5751","date_created":"2021-04-30T14:41:29Z"}],"publisher":"Technische Hochschule Ostwestfalen-Lippe","type":"journal_article","file_date_updated":"2021-04-30T14:41:29Z","date_updated":"2023-03-15T13:50:01Z","issue":"2"},{"date_updated":"2023-03-15T13:50:01Z","issue":"1","related_material":{"link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","relation":"contains"}]},"editor":[{"full_name":"Padoano, Elio","last_name":"Padoano","first_name":"Elio"},{"last_name":"Villmer","full_name":"Villmer, Franz-Josef","first_name":"Franz-Josef"}],"type":"conference","abstract":[{"text":"Due to a high level of competition in automotive industry, it is essentially important for automotive companies to develop innovative strategies and technologies in production and logistics. Postponement of production difference, i.e., customer individualized demand has been considered as an innovative strategy and more or less implemented in the production process, mostly before and during the final assembly. This paper proposed the concept of postponing the individualization of some components after the assembly. The idea is to use the idle times especially during the distribution process when vehicles are accumulated to generate big transportation batches or the follow-up transport does not start immediately. The individualization is carried out in specially realized workshops. Objectives of the approach are to reduce variations in the manufacturing, to shorten delivery times and to give consumers the ability to reorder individual components shortly before delivery. This kind of postponement of individualization induces the requirement of redesigning the logistics network, which means the selection of workshop locations and the new selection of the suppliers for the individualized components. To reach this aim, a software tool has been developed. In the tool, the data required in the logistics network such as suppliers and workshop potential locations are managed in a MySQL database and the optimization of the network is achieved by the especiallydeveloped non-dominated sorting genetic algorithm-II (NSGA-II). The design and development of the solution individuals and the fitness functions, which are the most important elements of a genetic algorithm, are based on the mathematical model of the logistics network design with product late individualization. Different scenarios are considered and generated to examine the applicability of the methodology in automotive practice. The optimization model and the heuristics of genetic algorithm are validated through the Pareto solutions for different scenarios.","lang":"eng"}],"conference":{"location":"Pordenone, Italy","name":"Proceedings7th International Conference","start_date":"2017-09-28","end_date":"2017-09-29"},"page":"139-150","keyword":["Automotive industry","Logistics network configuration","Late product individualization","Postponement","NSGGA"],"status":"public","year":2017,"user_id":"45673","corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"department":[{"_id":"DEP7000"},{"_id":"DEP1306"}],"main_file_link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","open_access":"1"}],"title":"Optimization of Automotive Logistics Network with Late Product Individualization","citation":{"ieee":"L. Li, “Optimization of Automotive Logistics Network with Late Product Individualization,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 139–150.","ama":"Li L. Optimization of Automotive Logistics Network with Late Product Individualization. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Publication series in direct digital manufacturing . Lemgo; 2017:139-150.","van":"Li L. Optimization of Automotive Logistics Network with Late Product Individualization. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 139–50. (Publication series in direct digital manufacturing ).","bjps":"Li L (2017) Optimization of Automotive Logistics Network with Late Product Individualization. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 139–150.","din1505-2-1":"Li, Li: Optimization of Automotive Logistics Network with Late Product Individualization. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 139–150","chicago":"Li, Li. “Optimization of Automotive Logistics Network with Late Product Individualization.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 139–50. Publication Series in Direct Digital Manufacturing . Lemgo, 2017.","havard":"L. Li, Optimization of Automotive Logistics Network with Late Product Individualization, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 139–150.","short":"L. Li, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 139–150.","apa":"Li, L. (2017). Optimization of Automotive Logistics Network with Late Product Individualization. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 139–150). Lemgo.","mla":"Li, Li. “Optimization of Automotive Logistics Network with Late Product Individualization.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 139–50.","ufg":"Li, Li (2017): Optimization of Automotive Logistics Network with Late Product Individualization, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management (=Publication series in direct digital manufacturing ), Lemgo, S. 139–150.","chicago-de":"Li, Li. 2017. Optimization of Automotive Logistics Network with Late Product Individualization. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 139–150. Publication series in direct digital manufacturing . Lemgo."},"place":"Lemgo","publication_status":"published","language":[{"iso":"eng"}],"date_created":"2019-02-18T11:16:07Z","author":[{"first_name":"Li","full_name":"Li, Li","last_name":"Li","id":"58482"}],"publication_identifier":{"isbn":["978-3-946856-01-6"]},"_id":"576","oa":"1","publication":"Production Engineering and Management","series_title":"Publication series in direct digital manufacturing "},{"_id":"12975","publication":"Food Control","title":"A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry","publication_identifier":{"issn":["0956-7135"]},"intvolume":" 80","author":[{"orcid":"0000-0002-4511-9537","full_name":"Ulrich, Sebastian","id":"85847","last_name":"Ulrich","first_name":"Sebastian"},{"last_name":"Beindorf","full_name":"Beindorf, Philipp–Michael","first_name":"Philipp–Michael"},{"full_name":"Biermaier, Barbara","last_name":"Biermaier","first_name":"Barbara"},{"last_name":"Schwaiger","full_name":"Schwaiger, Karin","first_name":"Karin"},{"first_name":"Manfred","full_name":"Gareis, Manfred","last_name":"Gareis"},{"first_name":"Christoph","full_name":"Gottschalk, Christoph","last_name":"Gottschalk"}],"date_created":"2025-06-15T10:29:56Z","language":[{"iso":"eng"}],"publication_status":"published","volume":80,"place":"Amsterdam","citation":{"apa":"Ulrich, S., Beindorf, P., Biermaier, B., Schwaiger, K., Gareis, M., & Gottschalk, C. (2017). A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry. Food Control, 80(10), 281–289. https://doi.org/10.1016/j.foodcont.2017.05.005","mla":"Ulrich, Sebastian, et al. “A Novel Approach for the Determination of Freshness and Identity of Trouts by MALDI-TOF Mass Spectrometry.” Food Control, vol. 80, no. 10, 2017, pp. 281–89, https://doi.org/10.1016/j.foodcont.2017.05.005.","short":"S. Ulrich, P. Beindorf, B. Biermaier, K. Schwaiger, M. Gareis, C. Gottschalk, Food Control 80 (2017) 281–289.","chicago-de":"Ulrich, Sebastian, Philipp–Michael Beindorf, Barbara Biermaier, Karin Schwaiger, Manfred Gareis und Christoph Gottschalk. 2017. A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry. Food Control 80, Nr. 10: 281–289. doi:10.1016/j.foodcont.2017.05.005, .","ufg":"Ulrich, Sebastian u. a.: A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry, in: Food Control 80 (2017), H. 10,  S. 281–289.","havard":"S. Ulrich, P. Beindorf, B. Biermaier, K. Schwaiger, M. Gareis, C. Gottschalk, A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry, Food Control. 80 (2017) 281–289.","din1505-2-1":"Ulrich, Sebastian ; Beindorf, Philipp–Michael ; Biermaier, Barbara ; Schwaiger, Karin ; Gareis, Manfred ; Gottschalk, Christoph: A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry. In: Food Control Bd. 80. Amsterdam, Elsevier (2017), Nr. 10, S. 281–289","bjps":"Ulrich S et al. (2017) A Novel Approach for the Determination of Freshness and Identity of Trouts by MALDI-TOF Mass Spectrometry. Food Control 80, 281–289.","chicago":"Ulrich, Sebastian, Philipp–Michael Beindorf, Barbara Biermaier, Karin Schwaiger, Manfred Gareis, and Christoph Gottschalk. “A Novel Approach for the Determination of Freshness and Identity of Trouts by MALDI-TOF Mass Spectrometry.” Food Control 80, no. 10 (2017): 281–89. https://doi.org/10.1016/j.foodcont.2017.05.005.","ieee":"S. Ulrich, P. Beindorf, B. Biermaier, K. Schwaiger, M. Gareis, and C. Gottschalk, “A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry,” Food Control, vol. 80, no. 10, pp. 281–289, 2017, doi: 10.1016/j.foodcont.2017.05.005.","van":"Ulrich S, Beindorf P, Biermaier B, Schwaiger K, Gareis M, Gottschalk C. A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry. Food Control. 2017;80(10):281–9.","ama":"Ulrich S, Beindorf P, Biermaier B, Schwaiger K, Gareis M, Gottschalk C. A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry. Food Control. 2017;80(10):281-289. doi:10.1016/j.foodcont.2017.05.005"},"keyword":["MALDI-TOF","Mass spectrometry","Freshness","Fish","Quality control","Authenticity"],"extern":"1","page":"281-289","abstract":[{"text":"Properly handled fish is usually marketed as “fresh fish” until day 10 after fishing. About 40% of the total fishery that is used for direct human consumption is marketed in fresh form stored at temperatures up to +2 °C. Currently, there are no validated methods available for controlling the recommended period of storage. Apart from being a potential source for food fraud, spoiled fish represents a major source of foodborne illnesses and intoxications.\r\nIn this study, a rapid MALDI-TOF mass spectrometry based screening method was developed using the vitreous fluid of fish eyes as specimen for the examination of different days of storage. The vitreous fluid was collected from n = 100 freshly fished brown trouts at day 0, 3, 7, 9, and 11 post mortem (n = 20 brown trouts each day of examination). The samples were immediately measured by MALDI-TOF mass spectrometry in linear positive mode (mass range m/z 2000–20,000 Da). For quality assurance the experiment was repeated with a set of brown trouts (n = 100) originating from the same fish farm and with brown trouts (n = 100) originating from a different fish farm. For specificity testing rainbow trouts (n = 10) were examined accordingly. All obtained mass spectra were processed by means of MALDI Biotyper OC 3.1 and ClinProTools 3.0 software.\r\nThe MALDI Biotyper approach showed limited applicability for the identification of the time of storage. However, it was suitable to reliably discriminate between the closely related species brown and rainbow trout. Processing by ClinProTools revealed four crucial mass peaks (m/z 2594 Da, m/z 4857 Da, m/z 4879 Da, m/z 4899 Da) which enabled a reliable differentiation between day 0 and 3, 7, 9, 11 (rate of correct identification > 90%) as well as the differentiation between day 3 and 7, 9, 11 (rate of correct identification > 72%). However, this approach showed limited applicability within the end of the tested period of storage when comparing between day 7, 9, or 11.","lang":"eng"}],"department":[{"_id":"DEP4010"}],"year":"2017","user_id":"83781","status":"public","issue":"10","quality_controlled":"1","date_updated":"2025-06-18T12:06:11Z","doi":"10.1016/j.foodcont.2017.05.005","type":"scientific_journal_article","publisher":"Elsevier "},{"quality_controlled":"1","doi":"10.1016/j.foodcont.2017.01.010","date_updated":"2025-06-18T12:08:47Z","issue":"6","publisher":"Elsevier","type":"scientific_journal_article","page":"96-101","abstract":[{"text":"The consumption of edible insects (entomophagy) will gain greater significance facing the increasing global population, which is suggested to reach 9 billion people in 2050 (FAO., 2009). Due to their high amount of proteins, fatty acids, vitamins, and minerals insects represent a valuable source of essential nutrients.\r\nWhile the consumption of insects is very common in many countries of Africa and Asia, there is a far smaller acceptance for entomophagy in Western cultures. Though, products such as noodles or burger paddies made from insect meal have a better compliance and can already be purchased in some countries of the European Union. This processing step however involves the risk of adulteration, because there is no more possibility to authenticate the insects once they are ground.\r\nThe aim of this study was to investigate whether edible insects could be measured and distinguished by MALDI-TOF MS (matrix-assisted laser desorption ionization-time of flight mass spectrometry). Therefore, different kinds of edible insects (buffalo worms, mealworms, crickets and grasshoppers) were purchased via online shops and ground subsequently. The insect powder was extracted by vigorously shaking in diluted formic acid and measured by MALDI-TOF MS. The measurement provided reproducible as well as specific mass spectra and enabled a precise differentiation of the different species.","lang":"eng"}],"keyword":["MALDI-TOF MS","Mass spectrometry","Edible insects","Authenticity","Food quality"],"extern":"1","status":"public","department":[{"_id":"DEP4010"}],"year":"2017","user_id":"83781","title":"Direct identification of edible insects by MALDI-TOF mass spectrometry","publication_status":"published","volume":76,"language":[{"iso":"eng"}],"date_created":"2025-06-15T10:31:37Z","citation":{"chicago-de":"Ulrich, Sebastian, Ulrike Kühn, Barbara Biermaier, Nicolo Piacenza, Karin Schwaiger, Christoph Gottschalk und Manfred Gareis. 2017. Direct identification of edible insects by MALDI-TOF mass spectrometry. Food Control 76, Nr. 6: 96–101. doi:10.1016/j.foodcont.2017.01.010, .","ufg":"Ulrich, Sebastian u. a.: Direct identification of edible insects by MALDI-TOF mass spectrometry, in: Food Control 76 (2017), H. 6,  S. 96–101.","mla":"Ulrich, Sebastian, et al. “Direct Identification of Edible Insects by MALDI-TOF Mass Spectrometry.” Food Control, vol. 76, no. 6, 2017, pp. 96–101, https://doi.org/10.1016/j.foodcont.2017.01.010.","apa":"Ulrich, S., Kühn, U., Biermaier, B., Piacenza, N., Schwaiger, K., Gottschalk, C., & Gareis, M. (2017). Direct identification of edible insects by MALDI-TOF mass spectrometry. Food Control, 76(6), 96–101. https://doi.org/10.1016/j.foodcont.2017.01.010","short":"S. Ulrich, U. Kühn, B. Biermaier, N. Piacenza, K. Schwaiger, C. Gottschalk, M. Gareis, Food Control 76 (2017) 96–101.","havard":"S. Ulrich, U. Kühn, B. Biermaier, N. Piacenza, K. Schwaiger, C. Gottschalk, M. Gareis, Direct identification of edible insects by MALDI-TOF mass spectrometry, Food Control. 76 (2017) 96–101.","chicago":"Ulrich, Sebastian, Ulrike Kühn, Barbara Biermaier, Nicolo Piacenza, Karin Schwaiger, Christoph Gottschalk, and Manfred Gareis. “Direct Identification of Edible Insects by MALDI-TOF Mass Spectrometry.” Food Control 76, no. 6 (2017): 96–101. https://doi.org/10.1016/j.foodcont.2017.01.010.","din1505-2-1":"Ulrich, Sebastian ; Kühn, Ulrike ; Biermaier, Barbara ; Piacenza, Nicolo ; Schwaiger, Karin ; Gottschalk, Christoph ; Gareis, Manfred: Direct identification of edible insects by MALDI-TOF mass spectrometry. In: Food Control Bd. 76. Amsterdam, Elsevier (2017), Nr. 6, S. 96–101","bjps":"Ulrich S et al. (2017) Direct Identification of Edible Insects by MALDI-TOF Mass Spectrometry. Food Control 76, 96–101.","van":"Ulrich S, Kühn U, Biermaier B, Piacenza N, Schwaiger K, Gottschalk C, et al. Direct identification of edible insects by MALDI-TOF mass spectrometry. Food Control. 2017;76(6):96–101.","ama":"Ulrich S, Kühn U, Biermaier B, et al. Direct identification of edible insects by MALDI-TOF mass spectrometry. Food Control. 2017;76(6):96-101. doi:10.1016/j.foodcont.2017.01.010","ieee":"S. Ulrich et al., “Direct identification of edible insects by MALDI-TOF mass spectrometry,” Food Control, vol. 76, no. 6, pp. 96–101, 2017, doi: 10.1016/j.foodcont.2017.01.010."},"place":"Amsterdam","publication_identifier":{"issn":["0956-7135"]},"author":[{"full_name":"Ulrich, Sebastian","id":"85847","last_name":"Ulrich","first_name":"Sebastian","orcid":"0000-0002-4511-9537"},{"first_name":"Ulrike","last_name":"Kühn","full_name":"Kühn, Ulrike"},{"first_name":"Barbara","full_name":"Biermaier, Barbara","last_name":"Biermaier"},{"first_name":"Nicolo","full_name":"Piacenza, Nicolo","last_name":"Piacenza"},{"last_name":"Schwaiger","full_name":"Schwaiger, Karin","first_name":"Karin"},{"first_name":"Christoph","last_name":"Gottschalk","full_name":"Gottschalk, Christoph"},{"last_name":"Gareis","full_name":"Gareis, Manfred","first_name":"Manfred"}],"intvolume":" 76","_id":"12976","publication":"Food Control"},{"abstract":[{"text":"Im Rahmen dieser Arbeit wird die konstruktive Auslegung von Steckverbindern hinsichtlich der Stromtragfähigkeit untersucht.\r\nZunächst werden bekannte analytische Modelle aus verschiedenen physikalischen Phänomenen (mechanische, elektrische, thermische und kontaktphysikalische) miteinander kombiniert, um die Stromerwärmung von Steckverbinderkontakten incl. der angeschlossenen Leitung analytisch zu berechnen. Die Modelle werden mit Hilfe von Experimenten und FE-Analysen verifiziert.\r\nAnschließend werden die analytischen Modelle umgeformt, um wichtige Fragestellungen bei der konstruktiven Auslegung von Steckverbinderkontakten zu berechnen. Dazu zählen unter anderem der maximal zulässige Durchgangswiderstand von Steckverbinderkontakten, der Zusammenhang zwischen Durchgangswiderstand und Stromerwärmung, sowie die optimale Anzahl an Kontaktfedern für einen Steckverbinderkontakt. Zudem werden Sensitivitätsanalysen\r\ndurchgeführt, um den Einfluss konstruktionsrelevanter Parameter auf die Stromerwärmung von Steckverbinderkontakten darzustellen.\r\nDurch die gewonnenen Ergebnisse wird schließlich ein Vorgehen zur systematischen Auslegung von Steckverbinderkontakten hinsichtlich der Stromtragfähigkeit erarbeitet. Dieses nutzt analytische Modelle (parametrisierte Modelle), mit denen sich wesentliche geometrische Abmessungen und Werkstoffkennwerte berechnen lassen. Dadurch können Baureihen von Steckverbinderkontakten entwickelt werden, die einer einheitlichen Methodik folgen, eine Überdimensionierung vermeiden und sich für verschiedene Stromstärken skalieren lassen.\r\nDie Arbeit stellt damit einen Ansatz zur parametrischen Konstruktion von Steckverbindern dar.","lang":"ger"},{"lang":"eng","text":"The aim of this work is to investigate the design of connector contacts according to a specific current carrying capacity.\r\nAt first established analytical models of different physical phenomena (mechanic, electric, thermal and contact physical) are combined. Thus, the heating of connector contacts including the connected wire can be calculated analytically.\r\nThe models are verified by experiments and by FE-Analysis.\r\nAfterwards, these analytical models are transformed in order to calculate important parameters for the design process of connector contacts. This includes the maximum permissible power loss of a connector contact, the relationship between the transition resistance and the heating, as well as the optimal number of contact springs for a connector contact. Additionally, sensitivity studies are conducted, in order to illustrate the influence of several design parameters\r\non the heating of connector contacts.\r\nUsing the obtained results, a systematic approach for dimensioning connector contacts with respect to the current carrying capacity is presented. This approach uses analytical models (parametrized models) in order to calculate the main geometrical and material parameters. Thus, connector contacts can be designed using a uniform method, which maximises the performance potential and which is scalable for different current ratings.\r\nTherefore, this work presents an approach for the parametric design of connector contacts."}],"supervisor":[{"first_name":"Frank","full_name":"Berger, Frank","last_name":"Berger"},{"full_name":"Song, Jian","last_name":"Song","id":"5297","first_name":"Jian"}],"page":"221","user_id":"83781","year":"2017","department":[{"_id":"DEP6000"},{"_id":"DEP6012"}],"status":"public","defense_date":"2017-02-06","date_updated":"2026-02-27T10:54:53Z","type":"dissertation","publisher":"Universitätsverlag Ilmenau","oa":"1","_id":"13452","series_title":"Ilmenauer Beiträge zur elektrischen Energiesystem‐, Geräte- und Anlagentechnik","main_file_link":[{"url":"https://www.db-thueringen.de/receive/dbt_mods_00032040","open_access":"1"}],"title":"Parametrisierte Modelle zur konstruktiven Auslegung optimierter elektrischer Steckverbinderkontakte","author":[{"first_name":"Michael","last_name":"Blauth","id":"49095","full_name":"Blauth, Michael"}],"publication_identifier":{"isbn":["978-3-86360-155-3"]},"place":"Ilmenau","citation":{"ieee":"M. Blauth, Parametrisierte Modelle zur konstruktiven Auslegung optimierter elektrischer Steckverbinderkontakte, vol. 18 (28.03.2017). Ilmenau: Universitätsverlag Ilmenau, 2017.","havard":"M. Blauth, Parametrisierte Modelle zur konstruktiven Auslegung optimierter elektrischer Steckverbinderkontakte, Universitätsverlag Ilmenau, Ilmenau, 2017.","van":"Blauth M. Parametrisierte Modelle zur konstruktiven Auslegung optimierter elektrischer Steckverbinderkontakte. Ilmenau: Universitätsverlag Ilmenau; 2017. 221 p. (Ilmenauer Beiträge zur elektrischen Energiesystem‐, Geräte- und Anlagentechnik; vol. 18 (28.03.2017)).","ama":"Blauth M. Parametrisierte Modelle zur konstruktiven Auslegung optimierter elektrischer Steckverbinderkontakte. Vol 18 (28.03.2017). Universitätsverlag Ilmenau; 2017.","din1505-2-1":"Blauth, Michael: Parametrisierte Modelle zur konstruktiven Auslegung optimierter elektrischer Steckverbinderkontakte, Ilmenauer Beiträge zur elektrischen Energiesystem‐, Geräte- und Anlagentechnik. Bd. 18 (28.03.2017). Ilmenau : Universitätsverlag Ilmenau, 2017","apa":"Blauth, M. (2017). Parametrisierte Modelle zur konstruktiven Auslegung optimierter elektrischer Steckverbinderkontakte: Vol. 18 (28.03.2017). Universitätsverlag Ilmenau.","mla":"Blauth, Michael. Parametrisierte Modelle zur konstruktiven Auslegung optimierter elektrischer Steckverbinderkontakte. Universitätsverlag Ilmenau, 2017.","short":"M. Blauth, Parametrisierte Modelle zur konstruktiven Auslegung optimierter elektrischer Steckverbinderkontakte, Universitätsverlag Ilmenau, Ilmenau, 2017.","bjps":"Blauth M (2017) Parametrisierte Modelle zur konstruktiven Auslegung optimierter elektrischer Steckverbinderkontakte. Ilmenau: Universitätsverlag Ilmenau.","chicago-de":"Blauth, Michael. 2017. Parametrisierte Modelle zur konstruktiven Auslegung optimierter elektrischer Steckverbinderkontakte. Bd. 18 (28.03.2017). Ilmenauer Beiträge zur elektrischen Energiesystem‐, Geräte- und Anlagentechnik. Ilmenau: Universitätsverlag Ilmenau.","chicago":"Blauth, Michael. Parametrisierte Modelle zur konstruktiven Auslegung optimierter elektrischer Steckverbinderkontakte. Vol. 18 (28.03.2017). Ilmenauer Beiträge zur elektrischen Energiesystem‐, Geräte- und Anlagentechnik. Ilmenau: Universitätsverlag Ilmenau, 2017.","ufg":"Blauth, Michael: Parametrisierte Modelle zur konstruktiven Auslegung optimierter elektrischer Steckverbinderkontakte, Bd. 18 (28.03.2017), Ilmenau 2017 (Ilmenauer Beiträge zur elektrischen Energiesystem‐, Geräte- und Anlagentechnik)."},"language":[{"iso":"ger"}],"date_created":"2026-02-27T08:39:42Z","volume":"18 (28.03.2017)","publication_status":"published"},{"editor":[{"last_name":"Winker","full_name":"Winker, Martina","first_name":"Martina"},{"first_name":"Jan","full_name":"Trapp, Jan","last_name":"Trapp"},{"first_name":"Jens","full_name":"Libbe, Jens","last_name":"Libbe"},{"full_name":"Schramm, Engelbert","last_name":"Schramm","first_name":"Engelbert"}],"publisher":"Deutsches Institut für Urbanistik ","type":"book_chapter","date_updated":"2023-07-05T13:40:04Z","status":"public","department":[{"_id":"DEP3021"}],"year":"2017","user_id":"83781","page":"99–115","extern":"1","publication_status":"published","volume":16,"language":[{"iso":"ger"}],"date_created":"2023-06-15T07:52:26Z","citation":{"short":"S. Kunkel, B. Utesch, M. Winker, J. Felmeden, in: M. Winker, J. Trapp, J. Libbe, E. Schramm (Eds.), Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume, Deutsches Institut für Urbanistik , Berlin, 2017, pp. 99–115.","bjps":"Kunkel S et al. (2017) Wärmerückgewinnung und Betriebswassernutzung - Umsetzung einer Systemalternative in Frankfurt am Main. In Winker M et al. (eds), Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume, vol. 16. Berlin: Deutsches Institut für Urbanistik , pp. 99–115.","apa":"Kunkel, S., Utesch, B., Winker, M., & Felmeden, J. (2017). Wärmerückgewinnung und Betriebswassernutzung - Umsetzung einer Systemalternative in Frankfurt am Main. In M. Winker, J. Trapp, J. Libbe, & E. Schramm (Eds.), Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume (Vol. 16, pp. 99–115). Deutsches Institut für Urbanistik .","mla":"Kunkel, Sabine, et al. “Wärmerückgewinnung und Betriebswassernutzung - Umsetzung einer Systemalternative in Frankfurt am Main.” Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume, edited by Martina Winker et al., vol. 16, Deutsches Institut für Urbanistik , 2017, pp. 99–115.","din1505-2-1":"Kunkel, Sabine ; Utesch, Bernd ; Winker, Martina ; Felmeden, Jörg: Wärmerückgewinnung und Betriebswassernutzung - Umsetzung einer Systemalternative in Frankfurt am Main. In: Winker, M. ; Trapp, J. ; Libbe, J. ; Schramm, E. (Hrsg.): Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume, Deutsches Institut für Urbanistik: Edition Difu - Stadt, Forschung, Praxis. Bd. 16. Berlin : Deutsches Institut für Urbanistik , 2017, S. 99–115","ufg":"Kunkel, Sabine u. a.: Wärmerückgewinnung und Betriebswassernutzung - Umsetzung einer Systemalternative in Frankfurt am Main, in: Winker, Martina u. a. (Hgg.): Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume, Bd. 16, Berlin 2017 (Deutsches Institut für Urbanistik: Edition Difu - Stadt, Forschung, Praxis),  S. 99–115.","chicago-de":"Kunkel, Sabine, Bernd Utesch, Martina Winker und Jörg Felmeden. 2017. Wärmerückgewinnung und Betriebswassernutzung - Umsetzung einer Systemalternative in Frankfurt am Main. In: Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume, hg. von Martina Winker, Jan Trapp, Jens Libbe, und Engelbert Schramm, 16:99–115. Deutsches Institut für Urbanistik: Edition Difu - Stadt, Forschung, Praxis. Berlin: Deutsches Institut für Urbanistik .","chicago":"Kunkel, Sabine, Bernd Utesch, Martina Winker, and Jörg Felmeden. “Wärmerückgewinnung und Betriebswassernutzung - Umsetzung einer Systemalternative in Frankfurt am Main.” In Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume, edited by Martina Winker, Jan Trapp, Jens Libbe, and Engelbert Schramm, 16:99–115. Deutsches Institut für Urbanistik: Edition Difu - Stadt, Forschung, Praxis. Berlin: Deutsches Institut für Urbanistik , 2017.","havard":"S. Kunkel, B. Utesch, M. Winker, J. Felmeden, Wärmerückgewinnung und Betriebswassernutzung - Umsetzung einer Systemalternative in Frankfurt am Main, in: M. Winker, J. Trapp, J. Libbe, E. Schramm (Eds.), Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume, Deutsches Institut für Urbanistik , Berlin, 2017: pp. 99–115.","ieee":"S. Kunkel, B. Utesch, M. Winker, and J. Felmeden, “Wärmerückgewinnung und Betriebswassernutzung - Umsetzung einer Systemalternative in Frankfurt am Main,” in Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume, vol. 16, M. Winker, J. Trapp, J. Libbe, and E. Schramm, Eds. Berlin: Deutsches Institut für Urbanistik , 2017, pp. 99–115.","ama":"Kunkel S, Utesch B, Winker M, Felmeden J. Wärmerückgewinnung und Betriebswassernutzung - Umsetzung einer Systemalternative in Frankfurt am Main. In: Winker M, Trapp J, Libbe J, Schramm E, eds. Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume. Vol 16. Deutsches Institut für Urbanistik: Edition Difu - Stadt, Forschung, Praxis. Deutsches Institut für Urbanistik ; 2017:99-115.","van":"Kunkel S, Utesch B, Winker M, Felmeden J. Wärmerückgewinnung und Betriebswassernutzung - Umsetzung einer Systemalternative in Frankfurt am Main. In: Winker M, Trapp J, Libbe J, Schramm E, editors. Wasserinfrastruktur: Den Wandel gestalten Technische Varianten, räumliche Potenziale, institutionelle Spielräume. Berlin: Deutsches Institut für Urbanistik ; 2017. p. 99–115. (Deutsches Institut für Urbanistik: Edition Difu - Stadt, Forschung, Praxis; vol. 16)."},"place":"Berlin","publication_identifier":{"isbn":["978-3-88118-584-4 "]},"intvolume":" 16","author":[{"first_name":"Sabine","last_name":"Kunkel","full_name":"Kunkel, Sabine"},{"first_name":"Bernd","full_name":"Utesch, Bernd","last_name":"Utesch"},{"full_name":"Winker, Martina","last_name":"Winker","first_name":"Martina"},{"full_name":"Felmeden, Jörg","last_name":"Felmeden","id":"81335","first_name":"Jörg"}],"title":"Wärmerückgewinnung und Betriebswassernutzung - Umsetzung einer Systemalternative in Frankfurt am Main","publication":"Wasserinfrastruktur: Den Wandel gestalten. Technische Varianten, räumliche Potenziale, institutionelle Spielräume","series_title":"Deutsches Institut für Urbanistik: Edition Difu - Stadt, Forschung, Praxis","_id":"9938"}]