@misc{8023, abstract = {{The effect of jet Reynolds number, jet exit angle, the nozzle to surface distance, jet to jet spacing on the heat transfer, and pressure force performance from multiple impinging round jets on a moving curved surface have been numerically evaluated. Two correlations are developed and validated for the average Nu number and the pressure force coefficient and the agreement between the CFD and correlations was reasonable. The surface motion effect becomes more pronounced on the Nu number distribution for low jet Re number, high jet to jet spacing, large jet to surface distance, and angled jets. The pressure force coefficient is highly dependent on the jet to surface distance and jet angle but relatively insensitive to jet Re number and jet to jet spacing. }}, author = {{Chitsazan, Ali and Klepp, Georg Heinrich and Glasmacher, Birgit}}, booktitle = {{Frontiers in heat and mass transfer : FHMT ; an international journal }}, issn = {{2151-8629}}, keywords = {{Angled jets, Heat transfer, Pressure force, Surface motion, Curvature, Correlation}}, number = {{1}}, publisher = {{Global Digital Centra}}, title = {{{CORRELATION DEVELOPMENT FOR JET IMPINGEMENT HEAT TRANSFER AND FORCE ON A MOVING CURVED SURFACE}}}, doi = {{10.5098/hmt.18.16}}, volume = {{18}}, year = {{2022}}, } @misc{8024, abstract = {{For the optimization of the impinging round jet, the pressure force coefficient and drying energy consumption on the moving curved surface are set as the objective functions to be minimized simultaneously. SHERPA search algorithm is used to search for the optimal point from multiple objective tradeoff study (Pareto Front) method. It is found that the pressure force coefficient on the impingement surface is highly dependent on the jet to surface distance and jet angle, while the drying energy consumption is highly dependent on the jet to jet spacing. Generally, the best design study during the multi-objective optimization is found at the maximum jet to surface distance, jet to jet spacing and surface velocity, and also minimum inlet velocity and jet angle. }}, author = {{Chitsazan, Ali and Klepp, Georg Heinrich and Chitsazan, Mohammad Esmaeil and Glasmacher, Birgit}}, booktitle = {{Frontiers in heat and mass transfer : FHMT ; an international journal }}, issn = {{2151-8629}}, keywords = {{Multiple jets, Heat transfer, Pressure force, Energy consumption, Optimization}}, publisher = {{Global Digital Centra}}, title = {{{MULTI-OBJECTIVE OPTIMIZATION OF DRYING ENERGY CONSUMPTION AND JET IMPINGEMENT FORCE ON A MOVING CURVED SURFACE}}}, doi = {{10.5098/hmt.18.17}}, volume = {{18}}, year = {{2022}}, } @misc{8025, author = {{Chitsazan, Ali and Klepp, Georg Heinrich and Glasmacher, Birgit}}, booktitle = {{Frontiers in Heat and Mass Transfer}}, issn = {{2151-8629}}, publisher = {{Global Digital Centra}}, title = {{{NUMERICAL STUDY OF JET IMPINGEMENT FORCE AND HEAT TRANSFER ON A MOVING CURVED SURFACE}}}, doi = {{10.5098/hmt.18.15}}, volume = {{18}}, year = {{2022}}, } @misc{8026, abstract = {{The effect of jet arrangement, jet Re number, jet exit angle (θ), the nozzle-to-surface distance (H/d), jet-to-jet spacing (S/d) on the heat transfer, and pressure force performance from multiple impinging round jets on a moving flat surface have been numerically evaluated. There is a minor difference between in-line and staggered arrangements on a moving flat surface. The averaged Nusselt number on a moving flat surface reduces with an increase in the relative velocity (VR). The surface motion effects become more pronounced on the local Nu distribution at low Re, small S/d, large H/d, and angled jets for a moving flat surface. The pressure force coefficient on a moving flat surface is highly dependent on the H/d and θ but relatively insensitive to the VR, Re, and S/d within the range examined. Two correlations are developed and validated for the average Nu and force coefficient and the agreement between the CFD and correlation is found to be reasonable.}}, author = {{Chitsazan, Ali and Klepp, Georg Heinrich and Glasmacher, Birgit}}, booktitle = {{International Journal of Heat and Technology}}, issn = {{0392-8764}}, keywords = {{multiple jet, heat transfer, pressure force, surface motion, angled jet, jet arrangement}}, number = {{1}}, pages = {{137--144}}, publisher = {{Pitagora}}, title = {{{Effect of Surface Motion on Heat Transfer and Pressure Force from Multiple Impinging Jets– A Numerical Study}}}, doi = {{10.18280/ijht.400116}}, volume = {{40}}, year = {{2022}}, } @misc{8030, author = {{Klepp, Georg Heinrich}}, booktitle = {{Kraftstoffe für die Mobilität von morgen: 4. Tagung der Fuels Joint Research Group am 10. und 11. Juni 2021 in Dresden-Radebeul }}, editor = {{Bünger, Jürgen and Eilts, Peter and Krahl, Jürgen and Munack, Axel}}, isbn = {{978-3-7369-7440-1}}, location = {{Dresden-Radebeul}}, pages = {{54--62}}, publisher = {{Cuvillier Verlag}}, title = {{{Adsorptionsspeicher für die Kraftstoffe von Morgen}}}, volume = {{30}}, year = {{2022}}, } @misc{8063, abstract = {{Im Rahmen der Verabschiedung des Integrated-Reporting-Rahmenwerks Ende 2013 ist zugleich ein neues Unternehmensführungs- und Steuerungskonzept - das Integrated Thinking - vorgestellt worden. Demnach sollen Wechselwirkungen zwischen unterschiedlichen Kapitalarten erfasst und der unternehmerische Wertschöpfungsprozess mehrdimensional ausgerichtet werden. Das Integrated Thinking wurde im Schrifttum bereits intensiv diskutiert. Dennoch ist das Konzept weiterhin nicht abschließend konkretisiert. Vor diesem Hintergrund hat die Value Reporting Foundation Ende 2021 sechs Prinzipien vorgestellt, welche das Integrated Thinking operationalisieren sollen. Im vorliegenden Beitrag wird diese Neuerung vorgestellt und vor dem Hintergrund der zu erwartenden Auswirkungen auf die Rechnungslegungs- und Prüfungspraxis kritisch gewürdigt.}}, author = {{Stawinoga, Martin}}, booktitle = {{Der Konzern: Zeitschrift für Gesellschaftsrecht, Steuerrecht, Bilanzrecht und Rechnungslegung der verbundenen Unternehmen}}, issn = {{1611-2296 }}, number = {{3}}, pages = {{ 92--96}}, publisher = {{Handelsblatt Fachmedien GmbH}}, title = {{{Integrated Thinking Principles der Value Reporting Foundation: Eine Analyse der Implikationen für die Rechnungslegungs- und Prüfungspraxis}}}, year = {{2022}}, } @misc{8191, author = {{Knepper-Bartel, Yvonne-Christin}}, booktitle = {{GebäudeGrün}}, issn = {{2568-9177}}, number = {{1}}, pages = {{17 -- 18}}, publisher = {{Patzer Verlag}}, title = {{{Entwicklung und Stand der Richtlinien Gebäudebegrünung}}}, year = {{2022}}, } @misc{8192, abstract = {{Eine vielversprechende Strategie zur Klimafolgenbewältigung ist die Gebäudebegrünung.}}, author = {{Knepper-Bartel, Yvonne-Christin}}, booktitle = {{Archiv des Badewesens : AB ; Fachzeitschrift für Praxis, Technik, Wissenschaft und Betriebswirtschaft }}, issn = {{0932-3872}}, number = {{5}}, pages = {{288 -- 296}}, publisher = {{Deutsche Gesellschaft für das Badewesen GmbH}}, title = {{{Potenziale der Gebäudebegrünung für den Bau und Umbau von Bädern}}}, year = {{2022}}, } @book{8194, abstract = {{Zum Thema Vermessung werden Ihnen die Methoden und Techniken für Planung, Ausführung, Abrechnung und Dokumentation von Bau- und Pflegemaßnahmen in der Landschaftsarchitektur und im Landschaftsbau vorgestellt. Neben bewährten Methoden für die Aufnahme und Absteckung werden u.a. Einmann-Totalstationen, DGNSS (GPS), Laserscanning und Photogrammetrie, die z.T. vom Stativ oder der Drohne aus durchgeführt werden können, dargestellt. Bezüglich des Aufmaßes und der Erdmassenberechnung werden Ihnen Hinweise zu den Regelungen für die elektronische Bauabrechnung (REB) gegeben und das AAA-Modell zum Austausch von Daten zwischen Behörden, Planern, Vermessern und ausführenden Unternehmen wird erläutert. }}, author = {{Knepper-Bartel, Yvonne-Christin}}, editor = {{Hornoff, Elke and Mahabadi, Mehdi and Thieme-Hack, Martin}}, isbn = {{978-3-8001-3389-5}}, pages = {{304}}, publisher = {{Eugen Ulmer KG}}, title = {{{Vermessung in Landschaftsbau und Grünflächenmanagement}}}, year = {{2022}}, } @misc{8218, abstract = {{Im Jahr 2019 hatte die Global Reporting Initiative (GRI) den Prozess zur Überarbeitung ihrer sogenannten GRI-Universalstandards eingeleitet. Dieses Projekt wurde im Oktober 2021 abgeschlossen. Die GRI-Universalstandards haben dabei hinsichtlich der Identifikation wesentlicher Berichtsinhalte und der Erstellung eines Nachhaltigkeitsberichts in Übereinstimmung mit den Standards der GRI eine Anpassung erfahren. Des Weiteren sind erstmals sektorspezifische GRI-Standards verabschiedet worden. Im Folgenden geht es um diese Neuerungen; vor dem Hintergrund weiterer institutioneller Entwicklungen im Bereich der Nachhaltigkeitsberichterstattung wird insofern auch der Standpunkt der GRI-Organisation gewürdigt.}}, author = {{Stawinoga, Martin}}, booktitle = {{WPg : Kompetenz schafft Vertrauen}}, issn = {{0340-9031}}, keywords = {{Nicht-finanzielle Information, GRI, Nachhaltigkeit, Wesentlichkeit, ISSB, GSSB, ESG, CSR}}, number = {{9}}, pages = {{514--522}}, publisher = {{IDW Verlag}}, title = {{{Zur Überarbeitung der GRI-Universalstandards : Die Global Reporting Initiative (GRI) im Spannungsfeld zwischen Souveränität und Kooperation}}}, year = {{2022}}, } @misc{8256, abstract = {{Resource efficiency was the central theme of Prof. Dr. Uta Pottgiesser’s key-note address. In other words, efficiency with regard to the sustainable usage of buildings, but also of land and materials. At the same time, the ambitious goal of “not demolishing, but rather converting,” the demand for a “new culture of car-ing and repairing,” has a central impact on the professional requirements in ar-chitecture and planning–and thus also on the content of teaching and training. In this context, it becomes clear that cultur-al heritage can serve as a model in many respects; by the same token, it must per-haps open itself up even further in terms of content with a view to the age of mod-ernism. }}, author = {{Pottgiesser, Uta}}, booktitle = {{Industrielles Welterbe - Chance und Verantwortung : internationale Konferenz vom 14. bis 15. Oktober 2021 auf Zeche Zollverein = Industrial world heritage - opportunity and responsibility : international conference on 14th and 15th October 2021 at Zollverein Coal Mine}}, editor = {{Kolhoff, Carolin}}, isbn = {{978-3-947675-14-2}}, keywords = {{Cultural Heritage, Sustainable Development Goals (SDG)}}, location = {{Essen}}, pages = {{35--39}}, publisher = {{Deutsche UNESCO-Komission e. V. }}, title = {{{Cultural Heritage as a Key Resource for Resilience and Sustainability}}}, year = {{2022}}, } @misc{8287, author = {{Liu, Lisa}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Darstellung von Süchten im Animationsfilm im Laufe der Zeit}}}, year = {{2022}}, } @misc{8294, abstract = {{Der historische Baustoff Lehm erlebt seit einigen Jahren eine Renaissance. Er wird wieder vermehrt in Wohn- und Nichtwohngebäuden in Form von Putz, als Bauplatte oder als Wandbildner in Form von Stampflehm oder Lehmsteinen eingesetzt. Seine mechanischen, thermischen und hygrischen Eigenschaften werden dementsprechend vielfach untersucht, wohingegen die raumakustischen Eigenschaften von Lehmoberflächen vergleichsweise wenig betrachtet werden. Um zu den raumakustischen Eigenschaften von Lehmoberfläche zu weiteren Erkenntnissen zu kommen, wurden für diese Studie Messungen zur Ermittlung der frequenzabhängigen Schallabsorptionsgrade mittels Hallraum-Verfahren nach EN ISO 354 (2003-12 Akustik - Messung der Schallabsorption in Hallräumen) von Lehm-Oberflächen durchgeführt. Des Weiteren wurde eine Versuchsreihe mit Messungen mit dem Impendanzrohr nach DIN EN ISO 10534-2 (2001-10 Akustik - Bestimmung des Schallabsorptionsgrades und der Impedanz in Impedanzrohren, Teil 2: Verfahren mit Übertragungsfunktion) begonnen. }}, author = {{Blaschke, Kim Kristin and Schwickert, Susanne and Kob , Malte }}, booktitle = {{Tagungsband, DAGA 2022 - 48. Jahrestagung für Akustik : 21.-24. März 2022, Stuttgart und Online }}, editor = {{Leistner, Philip}}, isbn = {{978-3-939296-20-1 }}, location = {{Stuttgart}}, pages = {{766--769}}, publisher = {{Deutsche Gesellschaft für Akustik e.V. }}, title = {{{Raumakustische Eigenschaften von Lehmoberflächen }}}, year = {{2022}}, } @misc{8328, abstract = {{Industrial Marketing Management (IMM) has made academic-practitioner articles central to its development strategy, creating a section to incubate articles co-authored by academics and practitioners. In this editorial, we provide insight to the current state of academic-practitioner articles in Industrial Marketing Management, outline suitable research methodologies, and provide guidelines for prospective authors.}}, author = {{van der Borgh, Michel and Schäfers, Tobias and Lindgreen, Adam and Di Benedetto, C. Anthony}}, booktitle = {{ Industrial marketing management : the international journal for industrial and high-tech firms}}, issn = {{1873-2062}}, keywords = {{Academic-practitioner, Research, Rigor, Relevance}}, number = {{5}}, pages = {{A1--A6}}, publisher = {{Elsevier}}, title = {{{Moving the needle: Publishing academic-practitioner research in Industrial Marketing Management}}}, doi = {{10.1016/j.indmarman.2022.03.015}}, volume = {{103}}, year = {{2022}}, } @inbook{8329, author = {{Steinmann, Barbara}}, booktitle = {{Encyclopedia of Business and Professional Ethics}}, editor = {{Poff, Deborah C. and Michalos, Alex C.}}, isbn = {{978-3-319-23514-1}}, publisher = {{Springer Live Reference Work}}, title = {{{Transformational Leadership and Goal Setting}}}, doi = {{https://doi.org/10.1007/978-3-319-23514-1_1326-1}}, year = {{2022}}, } @misc{8330, abstract = {{In an attempt to realize decision usefulness of corporate sustainability reporting, standard setters and scholars are discussing a shift from a voluntary to a mandatory reporting approach. However, the EU Commission and the International Sustainability Standards Board (ISSB) follow different approaches regarding the materiality definition of mandatory corporate sustainability reporting. While the EU Commission focuses on double materiality, the ISSB concentrates on single materiality. In view of this controversy, the purpose of this paper is to analyze both materiality concepts and related sustainability reporting frameworks that significantly influence the future standardization process. Referring to a ’block model' between the EU Commission and the ISSB, a systematic connection of future sustainability reporting with the UN Sustainable Development Goals (SDGs) as well as the monetized reporting of externalities and science based climate targets are proposed. As the proposed ’block model' will contribute to the goal of climate neutral economy, it will also trigger a fundamental shift in the standardization process of sustainability reporting.}}, author = {{Stawinoga, Martin and Velte, Patrick}}, booktitle = {{Zeitschrift für Umweltpolitik & Umweltrecht : ZfU ; Beiträge zur rechts-, wirtschafts- und sozialwissenschaftlichen Umweltforschung = Journal of environmental law and policy = Revue de la politique et du droit d'environnement }}, issn = {{0931-0983}}, keywords = {{Sustainability, reporting, corporate social responsibility, FRS Foundation, International Sustainability Standards Board, European Commission, materiality, Global Reporting Initiative}}, number = {{2}}, pages = {{210--248}}, publisher = {{dfv Mediengruppe}}, title = {{{Single versus double materiality of corporate sustainability reporting: Which concept will contribute to climate neutral business?}}}, year = {{2022}}, } @misc{8333, author = {{Prehn, Deborah}}, pages = {{74}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Konzeption und Gestaltung einer Homeschooling-Plattform für Grundschulkinder - mit Hilfe von benutzerfreundlichem Interfacedesign}}}, year = {{2022}}, } @misc{8337, author = {{Haasler, Laura}}, pages = {{48}}, publisher = {{Technische Hochschule Ostwestfalen Lippe}}, title = {{{Konzeptionierung, Gestaltung und Realisierung eines Magazins mit dem Namen "GreenRoom"}}}, year = {{2022}}, } @misc{8339, author = {{Lauzi, F. and Westphal, J. and Rangarajan, D. and Schäfers, Tobias and Parra-Merono, M.C. and De-Juan-Vigaray, M.D.}}, location = {{Online}}, title = {{{Sales Enablement for Industrial Marketing: Exploring Contingencies and Dynamics}}}, year = {{2022}}, } @misc{8340, author = {{Schäfers, Tobias and Leban, Marina}}, location = {{ Online}}, title = {{{On-Demand Features: Opportunities and Challenges of Fractional as-a-Service Business Models}}}, year = {{2022}}, } @misc{8341, author = {{Cziehso, Gerrit and Schäfers, Tobias and Brinkhoff, Stefan and Nauß, Nina}}, location = {{Budapest}}, title = {{{„Just try it on!” - Using location-based bluetooth technology to reveal the effects of fitting room visits on purchases and in-store movement}}}, year = {{2022}}, } @misc{8344, abstract = {{BACKGROUND:The future of work in Germany is shaped by megatrends like globalization, automatization, digitization, and the demographic change. Furthermore, mass customization and the increasing usage of AI even in manual assembly offers new opportunities as well as it creates new challenges. OBJECTIVE:The trend towards mass customization in turn leads to increased complexity in production, which results in additional mental workload. This effect will continue in the foreseeable future. METHOD:Especially for small and medium sized companies, the backbone of Germany’s economy, automatization and Human-Robot-Collaboration will take time to develop. Information assistance systems are and will be a bridging technology to help organizations to manage increasing complexity and the mental workload of their employees to not only boost productivity but also keep their workforce healthy. The ongoing demographic change further underlines the need to use information assistance systems to compensate possible age-associated deficits, but also keep older employees committed to their work and avoid effects of disengagement or disenfranchisement through participatory ergonomics. RESULTS: Information assistance systems can only develop their inherent potential if they are designed to support employees of varying age, competence levels, and affinity for technology. Participatory development and early engagement are key factors for an increased acceptance and usage of the systems as well as the individualization to make it suitable for each individual employee. CONCLUSION:Expanding the functionalities to an adaptive assistance system, using physiological correlates of mental workload as an input, is conceivable in the future. }}, author = {{Bläsing, Dominic and Hinrichsen, Sven and Wurm, Susanne and Bornewasser, Manfred}}, booktitle = {{Work}}, issn = {{1875-9270 }}, keywords = {{Cognitive ergonomics, aging workforce, complexity, mixed-model assembly}}, number = {{4}}, pages = {{1535--1548}}, publisher = {{IOS Press}}, title = {{{Information assistance systems as preventive mediators between increasing customization and mental workload}}}, doi = {{http://doi.org/10.3233/WOR-211283}}, volume = {{72}}, year = {{2022}}, } @misc{8346, author = {{Sietz, Manfred and Siemens, Yvonne}}, keywords = {{catalyst, sugar, alcoholic fermentation, bioethanole, nanogold}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Katalytische Beschleunigung der alkoholischen Gärung durch kristalline Oxidationskatalysatoren auf Basis von Nanogold/ Kieselgel}}}, doi = {{https://doi.org/10.25644/n873-rm33}}, year = {{2022}}, } @misc{8352, author = {{Yuan, Haomiao and Hilmert, Dirk and Simonsmeier, Robin and Song, Jian}}, booktitle = {{ICEC 2022 - Sapporo - 31st International Conference on Electrical Contacts}}, location = {{Sapporo}}, pages = {{77 -- 82}}, publisher = {{ICEC}}, title = {{{Correlation between fretting corrosion and wear under various motion modes}}}, year = {{2022}}, } @misc{8353, abstract = {{A new model for the reliability prediction was developed and validated in previous investigations in order to enable the determination of the failure in time (FIT) of electrical connectors from highly accelerated life tests (HALT). The established testing method considers the influence of temperature, thermal cycling and vibration on the failure rates of electrical connectors. Various stress levels, i.e. the combinations of different test parameters, were derived from the ZVEI Technical Guideline TLF 0214 for low voltage automotive connectors. The applied vibrational load was initially defined as a sinusoidal test mode. The aim of this study is to investigate the influence of the vibration test mode on the failure rates. Two commonly used automotive connectors are chosen and subjected to stresses in HALT under two different types of vibrational load. The sinusoidal test mode along with the random vibration test mode are taken into account. The influence of the vibration test modes is subsequently determined by comparing the numbers of failures. Additionally, the principles of determining the coefficient of vibration are discussed and the specific coefficients for the chosen connectors are calculated based on the test results. A guideline, derived from this investigation, to select an appropriate vibration mode and vibration level is provided in order to compare the reliability of different electrical connectors.}}, author = {{Krüger, Kevin and Yuan, Haomiao and Song, Jian}}, booktitle = {{Microelectronics reliability : an internat. journal & world abstracting service}}, issn = {{0026-2714}}, keywords = {{Acceleration factor, Coefficient of vibration, Sine sweep, Random vibration, Failure rate}}, number = {{8}}, publisher = {{Elsevier}}, title = {{{The influence of the vibration test mode on the failure rate of electrical connectors}}}, doi = {{https://doi.org/10.1016/j.microrel.2022.114567}}, volume = {{135}}, year = {{2022}}, } @misc{8359, author = {{Fründ, Jan Lukas}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Videoverbreitungsstrategien auf YouTube und deren Nutzen für den Wissenschaftsjournalismus}}}, year = {{2022}}, } @misc{8362, author = {{Rieck, Nina}}, pages = {{62}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Original & Synchro : KANN DIE SYNCHRONISATION DIE WAHRNEHMUNG EINES FILMISCHEN PRODUKTES VERÄNDERN?}}}, year = {{2022}}, } @misc{8375, author = {{Stawinoga, Martin}}, booktitle = {{WPg: Die Wirtschaftsprüfung}}, issn = {{0340-9031}}, number = {{12}}, pages = {{S. 674}}, publisher = {{IdW-Verl.}}, title = {{{Interessengeleitete Unternehmensberichterstattung – Zur politischen Ökonomie der nachhaltigkeitsbezogenen Berichterstattung, von: Rühlmann, T.}}}, year = {{2022}}, } @misc{8396, author = {{Schimmel, Lea}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Erstellung eines Magazins in Form eines Handbuchs für Frauen in der Start-up-Gründung in Deutschland. }}}, year = {{2022}}, } @misc{8399, author = {{Heinze, Alisha}}, pages = {{42}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Figurenanalyse des Maximus aus dem Film Gladiator im Vergleich zu dem Modell der Heldenreise}}}, year = {{2022}}, } @misc{8401, abstract = {{200 million m³ oil palm trunks per year are still a “waste by-product”. For generating added-value, material modelling and product optimization and therefore knowledge of the elastic properties are required. Apart from Young´s modulus parallel to the vascular bundles, the elastic properties of oil palm wood are not known. The applicability of ultrasonic testing (time of flight of three longitudinal, six shear and three quasi-shear wave measurements) for the characterization of all 12 elastic constants of oil palm wood hav-ing various densities was investigated under the assumption of an orthotropic material behavior. For the evaluation, the simplified uncorrected and the full stiffness inversion method were used. The lack of correlation between the density and the ultrasonic velocity when using flat transducers questions the applicability of this method for oil palm wood.}}, author = {{Frühwald-König, Katja and Faust, Benedikt}}, booktitle = {{Proceedings 22nd International Nondestructive Testing and Evaluation of Wood Symposium}}, location = {{Quebec City, Canada}}, pages = {{29--39}}, publisher = {{U.S. Department of Agriculture, Forest Service, Forest Products Laboratory}}, title = {{{Evaluation of Elastic Constants of Oil Palm Wood using Ultrasonic Measurement}}}, year = {{2022}}, } @misc{8404, author = {{Wefing, Patrick and Conradi, Florian and Rämisch, Johannes and Neubauer, Peter and Schneider, Jan}}, location = {{Berlin }}, title = {{{Machine learning aided free amino nitrogen determination in beer mash with an inline NIR transflectance }}}, year = {{2022}}, } @book{8406, abstract = {{Das Lehr- und Arbeitsbuch entspricht der Einführungsvorlesung der Elektrotechnik an Hochschulen und ist explizit für das Selbststudium konzipiert. Von den physikalischen Grundlagen, elektrotechnischen Grundbegriffen und elektromagnetischen Feldern bis hin zu Fourier-Reihen und transienten Vorgängen werden in 22 Kapiteln grundlegende und vertiefende Vorlesungsinhalte der Elektrotechnik wiedergegeben. Aufgaben, Lösungen und kleinere Zusammenfassungen am Ende jedes Kapitels unterstützen beim selbstständigen Lernen und Erarbeiten der Inhalte. Das Buch führt als Selbststudium leicht lesbar durch die Basis der Elektrotechnik. Das Lernen mit diesem Arbeitsbuch ist in einem Bachelor-Fernstudiengang Elektrotechnik erprobt.}}, author = {{Meier, Uwe and Stübbe, Oliver}}, isbn = {{978-3-658-33869-5}}, pages = {{642}}, publisher = {{Springer Vieweg}}, title = {{{Elektrotechnik zum Selbststudium - Grundlagen und Vertiefung}}}, doi = {{ 10.1007/978-3-658-33870-1}}, year = {{2022}}, } @misc{8422, abstract = {{Im Bereich der industriellen Antriebstechnik sind herstellerspezifische, räumlich konzentrierte Gleichspannungs-Verbünde seit vielen Jahren Stand der Technik, jedoch existieren derzeit keine technischen Regeln um herstellerübergreifende DC-Netze aufbauen zu können. Eine wichtige Aufgabe ist es daher, für Hersteller von Geräten, Maschinen und Anlagen die Basis zu schaffen, um EMV analog zum Vorgehen bei AC-Niederspannungsnetzen zu erreichen. Im Projekt DC-INDUSTRIE2 arbeiten 39 Partner aus Industrie und Forschung und der ZVEI daran, diese Lücke zu schließen. Informationen zu dem Systemkonzept von DC-INDUSTRIE2 sind in [1] zu finden. In diesem Beitrag liegt der Schwerpunkt auf Störaussendungen und geeigneten Netznachbildungen für den Bereich von 150 kHz bis 30 MHz. Anhand von Messungen wird gezeigt, dass das im Systemkonzept von DC-INDUSTRIE beschriebene Konzept der dezentralen Funkentstörung funktioniert und ein so aufgebautes DC-Netz nicht stärker abstrahlt als ein vergleichbares AC-Netz.}}, author = {{Borcherding, Holger and Austermann, Johann and Fraeger, Lukas and Hovestadt, Winfried}}, booktitle = {{ Proceedings EMV Kongress 2022 : Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit. Köln, 12.-14.07.2022.}}, editor = {{Garbe, Heyno}}, keywords = {{EMV, Verträglichkeit, Elektromagnetik}}, location = {{Köln}}, pages = {{69--76}}, publisher = {{Apprimus Verlag}}, title = {{{Störaussendungen von Antrieben in industriellen DC-Netzen}}}, doi = {{https://doi.org/10.15488/12561}}, year = {{2022}}, } @misc{8424, author = {{Katsch, Linda and Conradi, Florian and Wefing, Patrick and Schneider, Jan}}, booktitle = {{38th Congress of the European Brewery Convention (EBC 2022) : held 30 May - 1 June 2022, Madrid, Spain }}, isbn = {{978-1-7138-7038-8 }}, location = {{Madrid}}, publisher = {{Curran Associates, Inc.}}, title = {{{Determination and prediction of the final attenuation and quality parameters in beer with near-infrared spectroscopy}}}, year = {{2022}}, } @misc{8425, author = {{Katsch, Linda and Schneider, Jan}}, booktitle = {{Brauwelt international : special journal covering the brewing and beverage industries}}, issn = {{0934-9340}}, number = {{3}}, pages = {{182--185}}, publisher = {{Fachverlag Hans Carl GmbH}}, title = {{{Potential for gentler pasteurization}}}, year = {{2022}}, } @misc{8426, author = {{Lau, Julian}}, pages = {{91}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Irrfahrt in den weißen Würfel - Eine Reportage über die Welt der Museen }}}, year = {{2022}}, } @misc{8429, author = {{Pauli, Daniel and Neumaier, Michael}}, location = {{Köln}}, publisher = {{DLG}}, title = {{{On the way to intelligent shelf life prediction}}}, year = {{2022}}, } @misc{8431, abstract = {{In this paper the thermal management for a traction drive inverter with SiC-MOSFETs will be discussed. The research objective is a high efficiency inverter resulting in a construction space optimized design. A possible approach to achieve these objectives is double-sided liquid cooling for the power modules with high power density. In this paper a three-phase inverter containing three half-bridge SiC power modules will be considered. Several cooling structures and arrangements for the power modules were examined by means of CFD simulation. The performance of the cooling systems is approximately 1 kW with a total power density of the power section of 100 kW per liter. }}, author = {{Cepin, Simon and Borcherding, Holger and Kusch, Rüdiger and Schnückel, Christian and Lis, Adrian}}, booktitle = {{ PCIM Europe : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 10-12 May 2022, Nuremberg }}, isbn = {{978-3-8007-5822-7}}, location = {{Nürnberg}}, pages = {{7}}, publisher = {{VDE Verlag}}, title = {{{Design of thermal management for double-sided cooled SiC-power semiconductors}}}, doi = {{10.30420/565822127}}, year = {{2022}}, } @misc{8432, abstract = {{In this paper a highly efficient three-phase power factor correction (PFC) converter is used as an active infeed converter (AIC) for an industrial DC conductor system. The DC grid is a monorail conveyer system with distributed DC link capacitors and intelligent energy storages alongside the conductor. The operation of the system, using voltage droop control for proper load distribution, is investigated. The power consumption of the proposed DC grid will be compared to a conventional AC grid with identical drives. The used active infeed converter operates at 100kHz and 650V nominal DC bus voltage with a nominal power of 5kW.}}, author = {{Koch, Jan-Niklas and Otte, Raphael and Borcherding, Holger}}, booktitle = {{PCIM Europe 2022 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management : 10-12 May 2022 }}, isbn = {{978-3-8007-5822-7 }}, location = {{Nürnberg}}, pages = {{1983}}, publisher = {{VDE Verlag}}, title = {{{Operation of a SiC-Based Three-Phase PFC Converter in an Industrial DC Conductor System with Distributed DC Link Capacitors}}}, doi = {{10.30420/565822183}}, year = {{2022}}, } @misc{8433, abstract = {{Today DC offers far-reaching advantages over AC. Therefore, many devices have been equipped with an internal DC link for many years. In the field of energy supply, the use of DC technology is also growing and is state of the art in offshore, high-voltage, vehicle and data center applications. The spread of industrial open DC grids is currently starting and is completely different due to the requirements: The industrial DC grid is highly dynamic. This means that power varies greatly over time and therefore there is a large amount of capacitance with little damping. The paper describes possibilities of outsourcing DC link capacitors from devices and the resulting influences on the lifetime.}}, author = {{Puls, Simon and Koch, Jan-Niklas and Warkentin, Slavi and Borcherding, Holger}}, booktitle = {{PCIM Europe 2022 International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings}}, location = {{Nürnberg}}, publisher = {{VDE Verlag}}, title = {{{Influence of Link Capacitor Outsourcing and Reduction of Capacitors in DC fed Drive Inverters}}}, doi = {{10.30420/565822046}}, year = {{2022}}, } @misc{8436, abstract = {{Today DC offers far-reaching advantages over AC. Therefore, many devices have been equipped with an internal DC link for years. In the field of energy supply, the use of DC technology is also growing and is state of the art e.g. in offshore, high-voltage, automotive and data center applications. The spread of industrial open DC grids is currently starting and is completely different due to the requirements: The DC grid itself and energy flows in an industrial environment are highly dynamic and bidirectional. Due to the low impedance electrical connection of the DC links of many devices, stored energies in fault cases as well as ripple currents during operation place particular requirements on the devices.}}, author = {{Puls, Simon and Koch, Jan-Niklas and Ehlich, Martin and Borcherding, Holger}}, booktitle = {{EPE Proceeding 2022}}, isbn = {{978-9-0758-1539-9}}, issn = {{2325-0313}}, keywords = {{Industries, Semiconductor device measurement, Capacitors, Europe, High-voltage techniques, Inverters, Circuit faults}}, location = {{Hannover}}, publisher = {{IEEE}}, title = {{{Particular Requirements on Drive Inverters for Safe and Robust Operation on an Open Industrial DC Grid}}}, year = {{2022}}, } @proceedings{8437, abstract = {{Low voltage direct current microgrids (DC-MG) provide a solution for increased efficiency by the reduction of conversion losses, total reuse of recuperation energy and an increased share of local power generation. Especially industrial applications ask for high uptimes and a stable voltage supply, which are both at stake in a power grid dominated by renewable generation. DC-MGs overcome these drawbacks by balancing energy distribution and power demand locally. For the planning and design of these grids a systemic approach is needed, due to the fact that many components are interacting. The task arises of structuring the knowledge available for individual technologies in an overall design framework. For this purpose, current state-of-the-art design processes are discussed in this article. These processes are mapped into the context of the requirements in an industrial environment. The findings are transferred to the design of industrial DC networks. Finally, a complete design process for DC-MGs is derived, which is proposed as a basis for the development of tools.}}, editor = {{Schaab, Darian and Spanier, Patrick and Ehlich , Martin and Fosselmann, Eric }}, isbn = {{978-1-6654-4042-4}}, keywords = {{Renewable energy sources, Power demand, Process control, Voltage, Robustness, Planning, Stakeholders}}, location = {{ Macau, Macao }}, publisher = {{IEEE}}, title = {{{Design Framework for Multiple Infeed DC-Microgrids in Industrial Applications}}}, doi = {{10.1109/CEECT53198.2021.9672633}}, year = {{2022}}, } @misc{8438, abstract = {{This paper investigates multi feed in operation of highly efficient SiC-based active infeed converters (AIC) for industrial DC micro grids using voltage droop control. For the demonstration of multi feed in operation two identical three-phase power factor correction (PFC) converters with different droop curve settings are utilized. The AICs are designed for a nominal power of 5 kW. A DC bus voltage range from 400 to 800 V is specified while the desired nominal DC bus voltage is 650 V. Multi feed in operation with implemented voltage droop control shows, that circulating currents between the active infeed converters occur, which cause problems due to high current peaks even on low load operation. These circulating currents are analysed.}}, author = {{Koch, Jan-Niklas and Otte, Raphael and Borcherding, Holger}}, booktitle = {{NEIS 2021; Conference on Sustainable Energy Supply and Energy Storage Systems}}, editor = {{Schulz, Detlef}}, isbn = {{978-3-8007-5651-3}}, location = {{Hamburg, Germany}}, pages = {{148--153}}, publisher = {{VDE}}, title = {{{Investigation of Multi Feed In of Active Infeed Converters for Industrial DC Micro Grids with Voltage Droop Control}}}, year = {{2022}}, } @misc{8440, abstract = {{Das Forschungsprojekt des Instituts für Designstrategien (TH OWL) in Kooperation mit dem Kultur- und Veranstaltungs- betrieb moStar Promotion GmbH, widmete sich der Frage, welchen Einfluss digitale Technologien auf die zukünftige Stadtentwicklung nehmen und wie diese gewinnbringend für Sozial- und Kultureinrichtungen zur Förderung der Quartierstruktur eingesetzt werden können. Als Untersuchungsraum des Reallabors diente die Essigfabrik – seit fast 20 Jahren eine Kulturstätte für Konzerte und Events im Deutzer Hafen auf der rechtsrheinischen Seite Kölns. Das gesamte Hafengebiet befindet sich aktuell in einem städtebaulichen Entwicklungsprozess vom ehemaligen Industriehafen zu einem Wohn- und Arbeitsquartier und stellt damit eines der größten, innerstädtischen Stadtentwicklungsprojekte in Deutschland dar. Mit diesem Transformationsprozess als beispielhaftem Hintergrund, möchte das Projekt bisherige Nutzungskonzepte von Quartiers- und Kulturzentren überdenken und neue, innovative Schnittstellen in Richtung einer kommunikativen, kreativen Digitalwirtschaft ausloten. Das Projekt wurde im Zeitraum von 2019 bis 2022 aus Mitteln der Europäischen Union und des Landes NRW gefördert.}}, author = {{Barbosa Jardim, Amanda and Bartenbach, Eva and Bremenkamp, Laura Rabea and Dorf, Johanna Julia and Henning, Kai-Fabian and Kintrup, Christopher and Müh, Maximilian and Oldenburg, Carsten and Weßeling, Ricarda and Häusler, Axel}}, isbn = {{978-3-939349-38-9}}, keywords = {{Essigfabik / Digitalisierung, Stadtviertel, Stadtentwicklung, Kulturzentrum, Erforschung, Projekt, Geschichte 2019-2022}}, pages = {{240}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe ; Institut für Designstrategien}}, title = {{{LivingLab Essigfabrik : Erforschung und Entwicklung eines digitalen Quartiers- und Kulturzentrums im Deutzer Hafen, Forschungsbericht 2019-2022}}}, year = {{2022}}, } @misc{8442, author = {{Stawinoga, Martin}}, booktitle = {{KoR: Zeitschrift für internationale und kapitalmarktorientierte Rechnungslegung}}, issn = {{1617-8084}}, number = {{7-8}}, pages = {{300--306}}, publisher = {{Handelsblatt Fachmedien}}, title = {{{Der Ausweis nachhaltigkeitsrelevanter Angaben im Lagebericht – Eine kritische Würdigung des Exposure Draft ESRS 1 „General principles“}}}, year = {{2022}}, } @misc{8443, author = {{Upmann, Matthias and Tholen, Janna and Schulze Althoff, Gereon}}, location = {{Leipzig}}, title = {{{Salmonellen - Risikominimierung in der Schlachtstrecke durch visuelle Kontrollsysteme und künstliche Intelligenz}}}, year = {{2022}}, } @proceedings{8444, editor = {{Jasperneite, Jürgen and Jumar, Ulrich}}, isbn = {{978-3-9818463-3-1}}, location = {{Lemgo}}, pages = {{1 -- 203}}, publisher = {{Institut für industrielle Informationstechnik - inIT der Technischen Hochschule Ostwestfalen-Lippe}}, title = {{{Kommunikation in der Automation : Beiträge des Jahreskolloquiums KommA 2022}}}, doi = {{10.25644/a4ws-9a49}}, volume = {{13}}, year = {{2022}}, } @misc{8446, author = {{Gossen, Arthur and Schwarzer, Knut and Sürmeli, Baris Gün and Weishaupt, Imke and Schneider, Jan}}, location = {{Madrid}}, title = {{{Smart Pasteurization Pilot Plant - a new approach with inline sensors towards a precise and gentle flash pasteurization}}}, year = {{2022}}, } @misc{8447, author = {{Schwarzer, Knut and Müller, Ulrich and Schneider, Jan}}, keywords = {{Pasteurization, minimal processing}}, location = {{Madrid}}, title = {{{Rethink Beer Pasteurization – Safety, Sustainability and Quality}}}, year = {{2022}}, } @misc{8450, author = {{Schwarzer, Knut and Weishaupt, Imke and Gossen, Arthur and Sürmeli, Baris Gün and Schneider, Jan}}, location = {{Frankfurt}}, title = {{{Smart Pasteurization - Eine neuartige, autonome Regelung für eine Kurzzeiterhitzung}}}, year = {{2022}}, } @misc{8457, abstract = {{Mass housing neighbourhoods (MHN) represent the leading pattern of urban transformation and expansion in the second half of the 20th century, and accordingly evaluation, regeneration and redesign of the MHN represent a necessary and challenging task in the contemporary research context. In the practical scope of MHN rehabilitation, various holistic approaches and design strategies are identified that affirm both ecological transition and social transformation of these urban settings. However, the level of application of such approaches across Europe varies greatly, and requires research initiatives of a comparative nature that open a cross-geographical debate at the European level. Although there is a series of evidence-based studies that define the conceptual framework of MHN, i.e., large-scale housing settlements, through historical-interpretative and chronological analyses, the academic debate on practical and feasible MHN rehabilitation and their sustainable integration into the urban development of cities at European level is underdeveloped. The specific objective of this paper is to establish preliminary insights into the current level of MHN rehabilitation and to identify challenges for further actions through (1) a comparative analysis of MHN role models from the second half of 20th century, and through (2) insights from an implemented expert questionnaire. The research engages a comparative case study analysis as the primary method and analyses MHN in Germany (as a representative of Western Europe) and in the two ex-Yugoslav countries, North Macedonia and Serbia (as representatives of Eastern Europe). This research has highlighted the main obstacles and challenges for MHN rehabilitation and demonstrated the importance of a multiscale approach to MHN analysis, having in mind that through the distribution of design values at the analysed spatial levels (neighbourhood level, building level, and apartment level) the application of affirmative indicators within different design values group is recognised.}}, author = {{Milovanovic, Aleksandra and Dragutinovic, Anica and Nikezic, Ana and Pottgiesser, Uta and Stojanovski, Mihajlo and Ivanovska Deskova, Ana and Ivanovski, Jovan and Damjanovska, Tea}}, booktitle = {{Sustainability / Multidisciplinary Digital Publishing Institute (MDPI)}}, issn = {{2071-1050 }}, keywords = {{mass housing neighbourhoods, rehabilitation, housing design values, comparative case study, questionnaire, multiscale approach, Germany, North Macedonia, Serbia}}, number = {{13}}, publisher = {{MDPI}}, title = {{{Rehabilitation of Mass Housing as a Contribution to Social Equality: Insights from the East-West European Academic Dialogue}}}, doi = {{10.3390/su14138106}}, volume = {{14}}, year = {{2022}}, } @misc{8467, abstract = {{A decarbonisation of the energy system is necessary to reduce greenhouse gas emissions and thus achieve the climate protection goals. For this reason, the renewable energy share in the power grids of many countries is increasing. In order to stabilize the energy system and increase its flexibility, energy management systems are needed. This paper offers a model of energy management system which starts from the network operator and ends at the consumer (an electric vehicle). Firstly, a controllable local system signal, which is sent through a smart meter gateway from the grid operator to the consumer, has been developed. The signal is based on the renewable energy share in the local grid, on the electricity exchange price and on a defined profile. Then, different charging modes, which regulate the energy consumption based on the signal, have been developed and field tested. Finally, the charging modes have been simulated in order to better compare the data. The results show that with smart charging, 90% of the energy demand can be rescheduled. In view of the load shifting, greenhouse gas emissions and energy costs can be reduced.}}, author = {{Schaffer, Maria and Bollhöfer, Fynn Christian and Üpping, Johannes}}, booktitle = {{International Journal of Energy Production and Management}}, issn = {{2056-3280 }}, keywords = {{electric vehicles, energy management systems, load shifting, renewable energy, smart grids.}}, number = {{2}}, pages = {{101 -- 113}}, publisher = {{WIT Press}}, title = {{{Load shifting potential of electric vehicles using management systems for increasing renewable energy share in smart grids}}}, doi = {{10.2495/EQ-V7-N2-101-113}}, volume = {{7}}, year = {{2022}}, } @misc{8514, author = {{Klußmann, Milan}}, pages = {{72}}, publisher = {{Technische Hochschule Ostwestfalen Lippe}}, title = {{{Crustler - Vermarktung eines Produktes für den Onlinehandel: Erstellung der Fotos und der Produktseite}}}, year = {{2022}}, } @misc{8555, author = {{Sen, Yonca}}, pages = {{63}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Marktanalyse: Netflix im Vergleich zu seinen größten Konkurrenten Amazon Prime Video und Disney+}}}, year = {{2022}}, } @book{8640, author = {{Vetter, Andreas}}, isbn = {{978-3-88778-612-0}}, keywords = {{Kleinmöbel, Ziergegenstand, Design, Geschichte 1950-1970}}, pages = {{359}}, publisher = {{Spurbuchverlag}}, title = {{{Unvernünftiges Design . Möbel und Wohnaccessoires der 1950er/1960er Jahre}}}, year = {{2022}}, } @misc{8672, author = {{Schankin, Noorlinah}}, pages = {{52}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Technische und kreative Möglichkeiten für eine erfolgreiche Kinderbuchillustration}}}, year = {{2022}}, } @misc{8719, author = {{Palagutin, Valeri}}, keywords = {{Fotografie, Grafikdesign, Foto, Fotobuch, Design}}, pages = {{22 / 43}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{„ICH BIN – ICH WAR“ – ein Fotobuch zum Thema Identität}}}, year = {{2022}}, } @misc{8722, author = {{Köhler, Martin}}, location = {{Sinsheim}}, title = {{{CBR-Versuche an Bettungsmaterialien - erste Ergebnisse -}}}, year = {{2022}}, } @misc{8741, author = {{Mechsner, Alica}}, pages = {{53}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Alles Pasta! : Konzeption, Gestaltung und Realisation eines Kochmagazins}}}, year = {{2022}}, } @misc{8744, author = {{Weinhold, Julian}}, publisher = {{Technische Hochschule Ostwestfalen Lippe}}, title = {{{Zeitmessung kryptographischer Verfahren anhand einer OpenSSL Implementierung}}}, year = {{2022}}, } @misc{8750, author = {{Sawatzki, Yvonne}}, pages = {{57}}, publisher = {{FB2 - Studiengang Medienproduktion}}, title = {{{Konzeption und Gestaltung eines Magazins zum Thema Fast und Slow Fashion}}}, year = {{2022}}, } @misc{8760, author = {{Beuchler, Jessica}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Entwurf, Gestaltung und Konzeption eines analog-digitalen Reiseführers über die Stadt Lügde}}}, year = {{2022}}, } @misc{8764, author = {{Prüßner, Nicola}}, pages = {{168}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Queer Horror: Untersuchung des Horror-Genres auf den Bestandteil von queeren Elementen und Erstellung eines Slasher-Antagonisten}}}, year = {{2022}}, } @misc{8771, author = {{Frömelt, Ronja}}, pages = {{43}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Editorial Design: Konzeption, Gestaltung und Realisation eines Magazins mit dem Schwerpunkt »Kreativitätstechniken«}}}, year = {{2022}}, } @misc{8784, abstract = {{Spielfilme und auch die Filmwissenschaft fassen das Thema „Alltag“ nur selten ins Auge. Erzählende Filme konzentrieren sich lieber auf das Spektakuläre und das Außergewöhnliche. Dies gilt vor allem für die kommerziell erfolgreichen Filme: Der Alltag der Figuren spielt dort stets nur eine Nebenrolle. Auch die Filmwissenschaft hat sich bisher wenig mit der Alltagsdarstellung im Film befasst. Die Texte, die es hierzu gibt, sind dabei vor Allem gesellschaftlich interessiert; an der Sozial- und Alltagskritik, die der jeweilige Film äußert. In dieser Arbeit versuche ich, diesen beiden Fokuspunkten ein wenig entgegenzuwirken, indem ich mir Filme anschaue, die ganz klar das Alltagsleben selbst, und nicht die Kritik daran, in den Mittelpunkt stellen. Meine These ist, dass diese Filme durch die nüchterne Darstellungsweise, dem täglichen Leben mehr Wert zuschreiben können. Der Alltag wird für das Publikum zu etwas Besonderem. Nach einer breiteren Betrachtung der Filmlandschaft, die zeigt, dass der Alltag in vielen Bereichen des Films von Interesse ist bzw. war, widme ich mich drei Filmbeispielen. Bei der Analyse finden sich verschiedene Gemeinsamkeiten sowohl auf der dramaturgischen und inhaltlichen Ebene, als auch in der Inszenierung des Alltags. Anschließend lässt sich feststellen, dass diese gemeinsamen Stilmittel dabei helfen, den Fokus des Publikums auf den Alltag bzw. das Gewöhnliche zu lenken, wodurch schließlich der eigene Alltag in einem besseren Licht steht.}}, author = {{Lienekampf, Tom}}, keywords = {{Film, Alltag, Slow Cinema}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Alltägliches im Film: Der Zauber des gewöhnlichen Lebens.}}}, year = {{2022}}, } @misc{8785, author = {{Schünemann, Sarah}}, pages = {{130}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Konzeption, Design und Entwicklung eines Website-Prototypen für die Aufklärungskampagne „Blutsschwestern“}}}, year = {{2022}}, } @misc{8796, author = {{Mazur, Agnieszka}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Analyse von Storytelling in erfolgreichen Dokumentarfilmen}}}, year = {{2022}}, } @misc{8798, author = {{Lorencis, Franziska}}, pages = {{106}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Entwicklung einer Corporate Identity für die Aufklärungskampagne "Blutsschwestern"}}}, year = {{2022}}, } @misc{8802, author = {{Wedel, Margarita}}, pages = {{42}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Moderne Medienangebote für Kinder}}}, year = {{2022}}, } @misc{8804, author = {{Goldmann, Oliver}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Virtual Reality - Performance der Unreal Engine 5}}}, year = {{2022}}, } @misc{8808, author = {{Schäfers, Tobias and Groza, Mark}}, location = {{Bielefeld }}, title = {{{Selling ownership or selling access? Examining salespersons' preferences and capabilities }}}, year = {{2022}}, } @misc{8811, author = {{Schmidtmeyer, Patrick}}, publisher = {{Technische Hochschule OWL}}, title = {{{Möglichkeiten zur Simulationsbeschleunigung unter Berücksichtigung der optischen Qualität}}}, year = {{2022}}, } @misc{8813, author = {{Bleibaum, Celina}}, pages = {{64}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Entwicklung einer Corporate Identity für einen Sportverein mit Schwerpunkt Instagram}}}, year = {{2022}}, } @misc{8824, author = {{Müller, Dustin}}, keywords = {{Metaverse, Digitalisierung, Virtual Reality, Augmented Reality}}, pages = {{43}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Metaverse - wie sich die Welt digital und virtuell verändert (Chancen und Risiken des Metaverse)}}}, year = {{2022}}, } @misc{8834, author = {{Walter, Johanna Konstanze}}, pages = {{49}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Printmedien in einer digitalisierten Welt - Schnittstellen zwischen Online und Print}}}, year = {{2022}}, } @misc{8840, author = {{Celik, Burak}}, pages = {{69}}, publisher = {{Technische Hochschule Ostwesfalen-Lippe}}, title = {{{Erzeugung und Rezeption von Spannung im Film}}}, year = {{2022}}, } @misc{8845, author = {{Schüller, Matthias}}, pages = {{79}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Coverdesign in der Popmusik: Grafik und Fotografie in Theorie und Praxis}}}, year = {{2022}}, } @misc{8853, author = {{Ramhorst, Julian}}, pages = {{186}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Mit der Kamera auf der Suche nach dem "Wahren" - Die Entwicklung der Kameraführung in den Filmen von Paolo Sorrentino}}}, year = {{2022}}, } @misc{8859, author = {{Ostmann, Sabrina}}, pages = {{80}}, publisher = {{Technische Hochschule OWL }}, title = {{{Der Wandel der Pferdefotografie durch die digitale Bildmanipulation}}}, year = {{2022}}, } @inbook{8863, author = {{Lohr, Mathias and Ott, Jürgen and Conze, Klaus-Jürgen and Günther, André and Mauersberger, Rüdiger and Roland, Hanns-Jürgen and Suhling, Frank}}, booktitle = {{Wirbellose Tiere (Teil 3) : Naturschutz und Biologische Vielfalt Heft 70/5 - Teil 3 }}, isbn = {{978-3-7843-5726-3}}, pages = {{659--679}}, publisher = {{Langwirtschaftsvlg. Münster}}, title = {{{Rote Liste und Gesamtartenliste der Libellen (Odonata) Deutschlands}}}, volume = {{5}}, year = {{2022}}, } @misc{8864, author = {{Lohr, Mathias and Hokamp, Jürgen}}, booktitle = {{Berichte aus den Arbeitskreisen heimische Orchideen}}, issn = {{0176-2745 }}, number = {{2}}, pages = {{117--121}}, publisher = {{AHO}}, title = {{{Buchbesprechung: N. Griebl & H. Presser: Orchideen Europas}}}, volume = {{38}}, year = {{2022}}, } @misc{8877, author = {{Schneider, Laura}}, pages = {{72 / 142 / 90}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Möbel Manufaktur Mlodzian - Konzeption und Umsetzung eines Corporate Designs}}}, year = {{2022}}, } @misc{8881, abstract = {{Façades cover a significant amount of surfaces in cities and are in constant interaction with the acoustic environment. Noise pollution is one of the most concerning burdens for public health and wellbeing; however, façade acoustic performance is generally not considered in outdoor spaces, in contrast to indoor spaces. This study presents a systematic literature review examining 40 peer-reviewed papers regarding the effects of façades on the urban acoustic environment and the soundscape. Façades affect sound pressure levels and reverberation time in urban spaces and can affect people’s perception of the acoustic environment. The effects are classified into three groups: Effects of façades on the urban acoustic environment, including sound-reflecting, sound-absorbing and sound-producing effects; Effects of façades on the urban soundscape, including auditory and non-auditory effects; Effects of the context on the acoustic environment around façades, including boundary effects and atmospheric effects. }}, author = {{Balderrama, Alvaro and Kang, Jian and Prieto, Alejandro and Luna-Navarro, Alessandra and Arztmann, Daniel and Knaack, Ulrich}}, booktitle = {{Sustainability / Multidisciplinary Digital Publishing Institute (MDPI)}}, issn = {{2071-1050 }}, keywords = {{façade, building envelope, acoustics, acoustic environment, soundscape, urban comfort}}, number = {{14}}, publisher = {{mdpi}}, title = {{{Effects of Façades on Urban Acoustic Environment and Soundscape: A Systematic Review}}}, doi = {{https://doi.org/10.3390/su14159670}}, volume = {{15}}, year = {{2022}}, } @misc{8888, abstract = {{Diese Arbeit handelt von der Frage, wie Tonaufnahmen-basierte Lernprozesse im Learning Management System der Hochschule für Musik Detmold, Moodle, erweitert werden können. Dazu werden LMS zunächst definiert und anschließend in die Bildungslandschaft eingeordnet. Daraufhin wird der Status Quo betrachtet mit der Feststellung, dass ein Bedarf an Werkzeugen besteht. Dieser Bedarf wurde durch die Programmierung zweier Anwendungen adressiert, die eine Integration im LMS ermöglichen und damit zu einer erhöhten Nutzbarkeit von Tonaufnahmen und musikalischen Inhalten führen sollen. Zum einen ist das eine Implementation des DTW Algorithmus, mittels welchem sich Synchronisationsdaten zwischen zwei verschiedenen Musikdarstellungen desselben Stückes berechnen lassen. Damit ließe sich bspw. ein Interface erstellen, auf dem die Anzeige der Musikwiedergabe mit der Anzeige einer Notenpartitur synchronisiert wird. Die zweite Anwendung fällt in den Bereich des maschinellen Lernens – es wurde ein automatischer Instrumentenklassifizierer geschrieben. Dieser eignet sich zur Erstellung von automatischen Taggings, zwecks Organisation von Daten und Gehörübungen. Die Nutzung einer CNN-Architektur hat sich dabei als effektiv erwiesen: Nach insgesamt 39 Lernepochen und knapp 7 Millionen gelernten Parametern konnte eine Genauigkeit von 95% erzielt werden. Als Datensatz diente die frei verfügbare Aufnahmensammlung des britischen Philharmonia Orchesters (vgl. Thorben Dittes). Im zweiten Kapitel soll ein Abstecken der Zwecke der einzelnen Programme die Designentscheidungen informieren, welche daraufhin erläutert werden. Im dritten Teil wird anschließend mit ScoreTube eine DTW Implementation von Berndt et al. zum Vergleich herangezogen, um die vorliegende Arbeit in den aktuellen Diskurs einzuordnen. Der Beitrag endet mit einer Evaluation der Ergebnisse und einem Ausblick auf potenzielle zukünftige Arbeiten.}}, author = {{Treiber, Dennis}}, keywords = {{learning management system, dynamic time warping, deep learning, convolutional neural network}}, pages = {{53}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Die Verwendung von Tonaufnahmen im LMS : Entwicklung spezifischer digitaler Werkzeuge an Hochschulen.}}}, year = {{2022}}, } @misc{8891, abstract = {{Die folgende Arbeit lässt sich in dem Bereich der Online-Werbung verorten, mit dem Ziel einen Werbeauftritt zur Vermarktung eines Produkts zu entwickeln. Um möglichst praxisnah arbeiten zu können, wurde die Bachelorarbeit in Kooperation mit einem Unternehmen aus Detmold angefertigt. Das Unternehmen Coating One hat sich mit ihren Produkten auf die Reinigung und den Schutz von Autolacken spezialisiert. Für ihre neu entwickelte Produktpalette benötigt das junge Unternehmen Produktfotos, um ihre Produkte im Internet über einen Online-Shop, sowie verschiedene Social-Media-Plattformen und digitale Werbebildschirme zu repräsentieren und vermarkten zu können. Neben Produktfotos für den Online-Shop sollen ebenfalls Fotos, Videos und Logo-Animationen für den Social-Media-Auftritt erstellt werden. Das hauptsächliche Interesse des Unternehmens für ihre Online-Präsenz liegt jedoch auf den Produktfotos, sodass der Schwerpunkt der Arbeit sowohl im schriftlichen als auch praktischen Teil ebenda gelegt wurde. Im theoretischen Teil dieser Arbeit wurde in diesem Sinne der Frage nachgegangen, worauf man bei der Erstellung von Produktfotos achten muss.}}, author = {{Stümmler, Marius}}, keywords = {{Produktfotos, Produktvideo, Logoanimationen, Animationen, Werbung, Werbeauftritt, Online-Präsenz, Social Media, Online Shop}}, pages = {{63}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Die Entwicklung eines Werbeauftrittes zur Vermarktung eines Produktes zur Autopflege}}}, year = {{2022}}, } @misc{8895, author = {{Ludwig, Joline}}, pages = {{90}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Analoge Fotografie aus der Sicht von Digital Natives}}}, year = {{2022}}, } @misc{8897, author = {{Theisen, Laura}}, pages = {{93}}, publisher = {{Technische Hochschule OWL}}, title = {{{Pferdefotografie - Wie lässt sich der Boom der Branche in den letzten 10 Jahran erklären?}}}, year = {{2022}}, } @misc{8901, author = {{Stawinoga, Martin}}, booktitle = {{IRZ: Zeitschrift für Internationale Rechnungslegung}}, issn = {{1862-5533}}, number = {{9}}, pages = {{387--393}}, publisher = {{C.H.Beck}}, title = {{{Das Sektorprogramm der Global Reporting Initiative – Eine Erörterung anhand des Sektorstandards für die Landwirtschaft}}}, year = {{2022}}, } @misc{8905, author = {{Lau, Andreas}}, pages = {{41}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Die Produktion eines Hörfunk-Features}}}, year = {{2022}}, } @misc{8913, author = {{Botschen, Janes}}, pages = {{40}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Welchen Einfluss haben Planung und Spontanität auf die Dokumentarfotografie? : Ein Vergleich der Kriegs- und Katastrophenfotografie}}}, year = {{2022}}, } @misc{8916, author = {{Gerth, Fabian}}, keywords = {{Einkaufen, Lebensmittel, Einzelhandel, Lieferdienste, Digitalisierung, Apps}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Digitalisierung im Lebensmitteleinzelhandel. Analyse von Bezahl- und Bestellsystemen und Entwicklung einer App.}}}, year = {{2022}}, } @misc{8921, author = {{Keuntje, Isabelle}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Emotionen im Dokumentarflm}}}, year = {{2022}}, } @misc{8924, author = {{Wittenbrink, Nina}}, pages = {{76}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Geschichte und Technik des drucks mit Fokus auf die Funktion und Verwendung der Risographie}}}, year = {{2022}}, } @misc{8926, author = {{Frühwald-König, Katja}}, location = {{Lichtenau/Westfalen}}, title = {{{Aktueller/künftiger Holzbedarf und Holzverwendung (stofflich und energetisch)}}}, year = {{2022}}, } @misc{8927, author = {{Wieland, Stefanie and Frühwald-König, Katja}}, location = {{Lichtenau/Westfalen}}, title = {{{Wald im Klimawandel - Neue Holzarten für das Bauen mit Holz}}}, year = {{2022}}, } @misc{8932, author = {{Östermann, Colin}}, pages = {{60}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Augmented Reality und der didaktische Nutzen dieser Technologie am Beispiel einer Exponaten Digitalisierung}}}, year = {{2022}}, } @misc{8934, author = {{Steinmann, Barbara}}, booktitle = {{In B. Steinmann (Chair), "Digitally supported training programs"}}, location = {{Hildesheim}}, title = {{{How to be a better trainer – Die Wirkung von trainerseitiger self-disclosure auf die Bewertung von und den Wissenserwerb in asynchronen online-Kurzschulungen}}}, year = {{2022}}, } @misc{8937, author = {{Duscha, Shanna}}, pages = {{468}}, publisher = {{Technische Hochschule Ostwestfalen Lippe}}, title = {{{Das Leiden des jungen Gestalters - Die Gestaltung der Konzeption und Gestaltung von Magazinen}}}, year = {{2022}}, } @misc{8938, author = {{Hellkamp, Cheryl-Ann}}, pages = {{66}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Interviewtechniken im Dokumentarfilm: Sensible Themen und Schaffung emotionaler Spannung}}}, year = {{2022}}, } @misc{8944, author = {{Siegmann, Daniel}}, pages = {{152}}, publisher = {{Technische Hochschule Ostwesfalen-Lippe}}, title = {{{Simulierte Effekte im Film: Eine Analyse von Kosten, Nutzen und Praktikabilität}}}, year = {{2022}}, } @misc{8953, author = {{Böckler, Lucas}}, pages = {{40}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Vertikale und horizontale Videoinhalte in einer Social Media Spot Reihe}}}, year = {{2022}}, } @misc{8957, author = {{Turczynski, Cindy}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{CRAP Guide to Design - Förderung der Lernmotivation mit Hilfe eines Portfolios}}}, year = {{2022}}, } @misc{8983, author = {{Kümmel, Jens and Nordhoff, Daniel}}, booktitle = {{Das Wirtschaftsstudium : wisu ; Zeitschrift für Ausbildung, Prüfung, Berufseinstieg und Fortbildung}}, issn = {{0340-3084}}, number = {{4}}, pages = {{418--423}}, publisher = {{NWB Verlag}}, title = {{{Due Diligence}}}, year = {{2022}}, } @misc{8987, author = {{Lührmann, Tom}}, pages = {{38}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Videomarketing als effektives Tool zur Markteinführung einer Innovationstechnologie am Beispiel Elektroumbau}}}, year = {{2022}}, } @inbook{8989, author = {{Pottgiesser, Uta}}, booktitle = {{Modern Heritage Reuse. Renovation. Restoration}}, editor = {{Tostões, Ana }}, isbn = {{978-3-0356-2508-0}}, keywords = {{Moderne, Denkmalschutz, Sanierung, Baudenkmal, Architektur 20. Jahrhundert}}, pages = {{40--45}}, publisher = {{Birkhäuser}}, title = {{{Documentation and conservation of Modern Movement architecture in education}}}, doi = {{https://doi.org/10.1515/9783035625097-007}}, year = {{2022}}, } @misc{8992, author = {{Albrecht, Tosca and Kellner, Theresa and Löffl, Josef}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe University of Applied Sciences and Arts Institut für Wissenschaftsdialog}}, title = {{{"Homeoffice - Ein Zukunftsmodell für die öffentliche Verwaltung?” Veränderungen von Arbeits- und Organisationtionsstrukturen in der öffentlichen Verwaltung in Zeiten der Covid-19 Pandemie.}}}, doi = {{https://doi.org/10.25644/45z7-n981}}, year = {{2022}}, } @misc{9008, abstract = {{Die Non-Financial Reporting Directive der EU (2014) hatte bestimmte Unternehmen von öffentlichem Interesse (Public Interest Entities) verpflichtet, eine nichtfinanzielle Erklärung aufzustellen. Vor dem Hintergrund des ambitionierten Green-Deal-Projekts der EU wird die neue EU-Richtlinie zur Nachhaltigkeitsberichterstattung (Corporate Sustainability Reporting Directive) die Non-Financial Reporting Directive ablösen. Der vorliegende Beitrag behandelt den neuen Nachhaltigkeitsbericht nach den geplanten Standards der European Financial Reporting Advisory Group als Sollobjekt der Prüfung – auch im Hinblick auf die Prüfung durch Aufsichtsrat bzw. Prüfungsausschuss. In einem Folgebeitrag in einer der nächsten Ausgaben der WPg geht es dann um die Prüfung des Nachhaltigkeitsberichts durch den Abschlussprüfer sowie um Fragen des Enforcement.}}, author = {{Velte, Patrick and Stawinoga, Martin}}, booktitle = {{WPg: Die Wirtschaftsprüfung}}, issn = {{0340-9031}}, number = {{19}}, pages = {{1069--1077}}, publisher = {{IDW Verlag}}, title = {{{Prüfung von Nachhaltigkeitsberichten nach der Corporate Sustainability Reporting Directive (CSRD) – Zum Nachhaltigkeitsbericht nach den geplanten ESRS aus der Sicht von Aufsichtsrat und Prüfungsausschuss}}}, year = {{2022}}, } @misc{9080, author = {{Probst , Mona }}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{KfW-Förderprogramme im Umschwung – Entwicklung eines neuen Fertighaus-Standards und Konfiguration drei nachhaltiger Wandaufbauten }}}, year = {{2022}}, } @misc{9085, author = {{Blaschke, Kim Kristin}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Untersuchung der raumakustischen Eigenschaften von Lehmoberflächen}}}, year = {{2022}}, } @misc{9087, author = {{Zuchowska, Tatiana}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe }}, title = {{{Energetische Potenzialanalyse zum Kreishaus Detmold – Dynamische Simulation zur Wirksamkeit von Fassadensanierung, Verhältnisänderung und Raumwärmemanagement }}}, year = {{2022}}, } @misc{9102, author = {{Backhaus, Luca}}, pages = {{30}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Visualisierung von Sucht in Spielfilmen}}}, year = {{2022}}, } @book{9105, author = {{Vetter, Andreas}}, isbn = {{978-3-7667-2584-4}}, pages = {{304}}, publisher = {{Callwey}}, title = {{{Haus und Auto}}}, year = {{2022}}, } @misc{9129, author = {{Velte, Patrick and Stawinoga, Martin}}, booktitle = {{WPg : Kompetenz schafft Vertrauen}}, issn = {{0340-9031}}, number = {{20}}, pages = {{1135--1143}}, publisher = {{IDW Verlag}}, title = {{{Prüfung von Nachhaltigkeitsberichten nach der Corporate Sustainability Reporting Directive (CSRD) – Zum Nachhaltigkeitsbericht nach den geplanten ESRS aus der Sicht von Abschlussprüfung und Enforcement}}}, year = {{2022}}, } @misc{9133, abstract = {{Mit der steigenden Komplexität der Entwicklung mechatronischer Produkte sind den beteiligten Akteuren die Wirkbeziehungen zwischen den Bauteilen sowie zwischen den Bauteilen und den erforderlichen Produktionsprozessen oft nicht mehr hinreichend bekannt. Nicht abgestimmte Entscheidungen und Handlungen sind die Folge, die zu Kosten- und Terminüberschreitungen führen. Dieser Beitrag zeigt mögliche Innovationspotenziale auf, die ein Assistenzsystem für das Komplexitätsmanagement bieten kann. }}, author = {{Deuter, Andreas and Tackenberg, Sven and Herrmann, Jan-Phillip and Vathauer, Marc and Kage, Franz}}, booktitle = {{WT WerkstattsTechnik online}}, issn = {{1436-4980 }}, number = {{6}}, pages = {{404--407}}, publisher = {{VDI Fachmedien}}, title = {{{Innovationspotenziale im Komplexitätsmanagement- Assistenzsystem für kleine und mittlere Unternehmen}}}, volume = {{112}}, year = {{2022}}, } @misc{9136, author = {{Puls, Simon and Austermann, Johann and Borcherding, Holger}}, booktitle = {{ Proceedings EMV Kongress 2022 : Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit. Köln, 12.-14.07.2022.}}, editor = {{Garbe, Heyno}}, location = {{Köln}}, pages = {{ 389--396}}, publisher = {{Apprimus Verlag}}, title = {{{Lebensdauerbeeinträchtigungen von Geräten durch Ausgleichsströme beim Betrieb im industriellen offenen DC-Netz}}}, doi = {{https://doi.org/10.15488/12598}}, year = {{2022}}, } @book{9141, author = {{Köhler, Martin and Rosen, Dieter}}, pages = {{102}}, publisher = {{Arbeitsgemeinschaft Pflasterklinker e. V.}}, title = {{{Klinkerpflaster - Technische Informationen}}}, year = {{2022}}, } @inbook{9146, author = {{Knepper-Bartel, Yvonne-Christin}}, booktitle = {{Richtlinien für den Bäderbau - Koordinierungskreis Bäder}}, isbn = {{978-3-00-073376-5}}, pages = {{63 -- 71}}, publisher = {{Wehlmann PrintMedia GmbH}}, title = {{{Planungsgrundlagen - Gebäudebegrünung und Regenwasserversickerung}}}, year = {{2022}}, } @misc{9159, abstract = {{Beschäftigte in haushaltsnahen Dienstleistungen wurden bislang gesellschaftlich wenig beachtet und wissenschaftlich kaum untersucht. Der Beitrag zeigt, weshalb und wie im Rahmen eines Forschungsprojektes der Fokus auf diese Gruppe gelegt wird, von welchen Rahmenbedingungen die Beschäftigung in haushaltsnahen Dienstleistungen gekennzeichnet ist und welche Erkenntnisse im Projekt bereits zu Arbeitsbedingungen, Belastungen und Ressourcen der Beschäftigten gewonnen werden konnten.}}, author = {{Geiger, Laura and Faller, Gudrun and Grimm, Valentin and Rubart, Jessica and Weber, Martin and Vennebusch, Thorsten}}, booktitle = {{ Betriebliche Prävention : Arbeit, Gesundheit, Unfallversicherung}}, issn = {{2365-7634}}, number = {{9}}, pages = {{376--379}}, publisher = {{Erich Schmidt Verlag}}, title = {{{Gekonnt handeln – Prävention für Beschäftigte in haushaltsnahen Dienstleistungen}}}, doi = {{https://doi.org/10.37307/j.2365-7634.2022.09.08}}, volume = {{134}}, year = {{2022}}, } @misc{9161, abstract = {{Employees in household-related services have so far been neglected in research and practice. The overall goal of our project is to identify work-related stress of this special target group, develop recommendations, and disseminate them using low-threshold, attractive edutainment offers. In this context, this contribution presents a learning platform design for the special target group of domestic workers, such as gardeners or cleaners. The design is based on a requirements analysis with respect to this special target group, which we as well outline in this contribution.}}, author = {{Grimm, Valentin and Geiger, Laura and Rubart, Jessica and Faller, Gudrun}}, booktitle = {{DELFI 2022 : die 20. Fachtagung Bildungstechnologien der Gesellschaft für Informatik e.V., 12.-14. September 2022, Karlsruhe}}, editor = {{Henning, Peter A. and Striewe, Michael and Wölfel, Matthias}}, isbn = {{978-3-88579-716-6}}, issn = {{1617-5468}}, keywords = {{E-Learning, Minority Group, Gameful Design, Gamification}}, location = {{Karlsruhe, DE}}, pages = {{213--214}}, publisher = {{Gesellschaft für Informatik e.V.}}, title = {{{Requirements and Design of a Training System for Domestic Workers}}}, doi = {{10.18420/delfi2022-037}}, volume = {{P-322}}, year = {{2022}}, } @misc{9162, abstract = {{The German manufacturing industry has been carrying out new developments towards the next industrial revolution, focusing on smart manufacturing environments. Our work emphasizes human-centered control rooms in the context of production plants. Increased automation does not have to come with less human control. Therefore, we report on multimodal collaborative interaction techniques to augment industrial control rooms. In particular, we include mobile workers who use the control room while being in the production hall using tablets or specifically mixed reality glasses. Collaborative annotation dashboards support discussions and a shared understanding among analysts. Manufacturing-related data can be integrated into business analytics environments so that holistic analyses can be performed. Multimodal interaction techniques can support effective interaction with the control room based on the users’ preferences. Immersive experience through mixed reality-based three-dimensional visualizations and interaction possibilities support users in obtaining a clear understanding of the underlying data.}}, author = {{Rubart, Jessica and Grimm, Valentin and Potthast, Jonas}}, booktitle = {{Journal Future Internet}}, issn = {{1999-5903 }}, keywords = {{control room, multimodel interaction, augmented reality, mixed reality}}, number = {{8}}, pages = {{1--18}}, publisher = {{MDPI}}, title = {{{Augmenting Industrial Control Rooms with Multimodal Collaborative Interaction Techniques}}}, doi = {{https://doi.org/10.3390/fi14080224}}, volume = {{14}}, year = {{2022}}, } @misc{9163, author = {{Potthast, Jonas and Grimm, Valentin and Rubart, Jessica}}, booktitle = {{Proceedings of Mensch und Computer 2022}}, editor = {{Mühlhäuser, Max}}, location = {{Darmstadt, DE}}, pages = {{594 -- 596}}, publisher = {{ACM Press}}, title = {{{Immersive Experience of Multidimensional Data using Mixed Reality based Scatterplots}}}, doi = {{https://doi.org/10.1145/3543758.3547515}}, year = {{2022}}, } @proceedings{9170, abstract = {{Human Factors in Hypertext 2022 (HUMAN'22) is the 5th workshop in this series. It is sponsored by ACM SIGWEB and is associated to the ACM Conference on Hypertext and Social Media 2022 (HT'22), which takes place between June 28th and July 1st in Barcelona, Spain as a hybrid event. HUMAN'22 takes place on June 28th---the conference's workshop day. After two years of pandemic-caused virtual workshops, HUMAN'22 is organized as a hybrid event, which is in line with the organization of the main conference. We see this as a chance to allow in-presence meetings while providing remote participants the opportunity to get in touch by low registration costs and a reduced carbon footprint. Today's digital media enables us to communicate over distance or even attend larger meetings online and the Corona pandemic has taught us to use these tools in our daily life. This puts a special focus on the role of hypertext in our communication and information exchange demands, in particular from a human's perspective.}}, editor = {{Atzenbeck, Claus and Rubart, Jessica}}, isbn = {{978-1-4503-9401-7}}, location = {{Barcelona (hybrid)}}, publisher = {{ACM Press}}, title = {{{Proceedings of the 5th international Workshop on Human Factors in Hypertext (HUMAN’22)}}}, doi = {{10.1145/3538882}}, year = {{2022}}, } @phdthesis{9175, abstract = {{Multiple impinging jets are widely used for their enhanced heat and mass transfer characteristics, especially for drying of material such as paper and textiles. Efficient transport characteristics between a drying medium and the material being dried as well as the jet impingement force acting on the force sensitive products (i.e. paper, fabrics) or force sensitive surfaces (i.e. painted, coated) are very critical in the industrial drying applications for the overall performance of the operation. Many variables and influencing factors and parameters need to be considered for the proper design of such multiple impinging jet systems. At present, a complete understanding of the effect of all the design and operating parameters is lacking. Designers should optimize the design parameters of industrial drying equipment to achieve the minimum capital costs (size of the apparatus) and running costs (energy consumption). In the framework of this thesis, the heat and mass transfer rates and pressure force between the multiple impinging round jets and moving surface are investigated numerically. Numerical simulations have been conducted to characterize the impinging jet heat and mass transfer and pressure force on a moving surface with an array of impinging round jets varying the following parameters: jet Reynolds number, nozzle-to-surface distance, jet-to-jet spacing, jet exit angle, relative surface curvature and relative surface velocity. Then, the key controlling design variables such as the nozzle-to-surface distance and the jet-to-jet spacing both normalized by the jet exit diameter (i.e., H/d and S/d), the jet exit velocity, the surface velocity and the jet exit angle have been considered for a design optimization. Correlations describing the average Nusselt number and pressure force coefficient for single row jet configurations impinging on the flat and curved surfaces have been developed. The present work illustrates that it is possible to address the effects of the complex flow phenomena as encountered in industrial drying process using generic CFD codes with good results. Thus complex and extensive computations based on elaborate and time consuming turbulence modelling (i.e. RSM or LES) may be avoided as well the expensive measurements of jet arrays impinging on moving surfaces. Using the correlation equations derived from the computations the dependencies for the main parameters over a wide range may be easily be determined. The analysis of the flow fields showed many different phenomena interacting, leading to different flow regimes. In order to assess these phenomena further investigations, preferably based on LES and DNS modelling and flow measurements are needed. Keywords: Multiple jets, Heat transfer, Pressure force, Energy consumption, Surface motion, Surface curvature, Optimization}}, author = {{Chitazan, Ali}}, keywords = {{Prallstrahlen, Wärmeübertragung, Druckkraft, Energieverbrauch, Oberflächenbewegung, Oberflächenkrümmung, Optimierung}}, pages = {{178}}, publisher = {{Gottfried Wilhelm Leibniz Universität}}, title = {{{Heat and mass transfer from jet impingement flow for drying machines}}}, doi = {{ https://doi.org/10.15488/11879}}, year = {{2022}}, } @book{9186, author = {{Köhler, Martin and Ulonska, Dietmar and Wellner, Frohmut}}, pages = {{120}}, publisher = {{Betonverband Straße, Landschaft, Garten e.V. (SLG)}}, title = {{{Technisches Handbuch - Dauerhafte Verkehrsflächen mit Betonpflastersteinen}}}, year = {{2022}}, } @inproceedings{9193, abstract = {{The paper studies local community centres (Serbian: centar mesne zajednice – CMZ) of post–war mass housing neighbourhoods in New Belgrade. Those were designed and built in 1970s as multifunctional centres with facilities and programmes complementary to the housing blocks: socio–cultural, commercial (grocery stores), daily services (post office, bank, crafts, etc.) spaces for socio–political activities and office spaces for the local community. The local community centres significantly increased quality of life of the residents, liveability and socialisation in the neighbourhoods. Furthermore, one of the main aims of these spaces was to enable actual realisation of the self–management in local communities. This paper reflects on the ideological and theoretical basis for their conceptualisation, referring to Edvard Kardelj, one of the main ideologues of self–management and originator of the local community concept in Yugoslavia. Moreover, the paper investigates: how the local community centres were planned, designed and programmed, and how they were spatially integrated in the existing residential blocks; how their organisational and governing role has been neglected over time, and their main purpose altered; and what are potentials and socio–spatial capacities for their future reuse. Reaffirmation of local community centres as utilitarian, governing and social space is recognized as key for promoting participation and collaborative governance in New Belgrade blocks, as well as for improving social connections, solidarity and sense of belonging in these neighbourhoods. As such, the local community centres could be one of the main factors of revitalisation of the blocks, increasing vitality and improving quality of life of the residents. Furthermore, the local community centres could have a major role in unlocking the potential of institutions and individuals towards new effective urban governance structures, as well as institutionalising citizens{\textquoteright} participation and bottom-up governance as direct democracy in the city today.}}, author = {{Dragutinovic, Anica and Pottgiesser, Uta and Quist, Wido}}, booktitle = {{Modern Design. Social Commitment and Quality of Life}}, editor = {{Jordá Such, Carmen and Palomares Figueres, Maite and Tostões, Ana and Pottgiesser, Uta}}, isbn = {{978-84-19286-59-8}}, keywords = {{local community centre, neighbourhood, post-war housing, neighbourhood histories, local communities, New Belgrade}}, location = {{Valencia, Spain}}, pages = {{329--337}}, publisher = {{Docomomo International, tirant lo blanch}}, title = {{{Local Community Centre as Utilitarian, Governing and Social Space: The Case of New Belgrade CMZ}}}, year = {{2022}}, } @misc{9195, author = {{Trilling, Marc and Katsch, Linda and Schneider, Jan}}, location = {{Lemgo}}, title = {{{Recyclat Transparency}}}, year = {{2022}}, } @misc{9196, author = {{Trilling, Marc and Katsch, Linda and Schneider, Jan}}, location = {{Bregenz}}, title = {{{Recyclat Transparency}}}, year = {{2022}}, } @misc{9197, author = {{Wittland, Sebastian and Sokolowsky, Martina and Kanzler, Clemens and Rohn, Sascha and Bertrand, Matthäus and Sciurba, Elisabeth}}, booktitle = {{Lebensmittelchemie : Zeitschrift der Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker }}, issn = {{1521-3811}}, location = {{Hamburg}}, number = {{S2}}, pages = {{229}}, publisher = {{Wiley-VCH }}, title = {{{Allulose in Backwaren - Charakterisierung des Einflusses von Allulose in Kombination mit verschiedenen Getreidearten und Mehltypen auf die Produktqualität von Feinen Backwaren}}}, doi = {{ https://doi.org/10.1002/lemi.202259182 }}, volume = {{76}}, year = {{2022}}, } @misc{9200, abstract = {{Charakterisierung des Einflusses von Allulose in Kombination mit verschiedenen Getreidearten und Mehltypen auf die Produktqualität von Feinen Backwaren Sebastian Wittland Die World Health Organization empfiehlt nicht mehr als 18 kg Zucker (Saccharose) pro Kopf und Jahr zu verzehren. In Deutschland liegt der Zuckerkonsum mit 35 kg pro Kopf & Jahr deutlich über dieser Empfehlung. Vor allem in industriell gefertigten Lebensmitteln wie Getränken, Backwaren und Süßwaren sind die Gehalte hoch und sorgen für eine übermäßige Zuckeraufnahme, wodurch ernährungsbedingte Krankheiten begünstigt werden. Daher sind von der Bundesregierung im Rahmen der nationalen Innovations- und Reformulierungsstrategie einerseits Reduktionsmaßnahmen des Zuckereinsatzes sowie Alternativen zur Substitution gefordert. Das Monosaccharid Allulose (Psicose), welches ein Epimer der Fructose ist, kommt beispielsweise in geringen Mengen in Feigen vor und kann als Alternative zu Saccharose verwendet werden. Im Vergleich zu Saccharose beträgt die relative Süßkraft von Allulose ca. 70 %. Hervorzuheben sind der niedrige Brennwert (Allulose: 0,8 kJ/g; Saccharose: 16 kJ/g) und die guten Verarbeitungseigenschaften, die mit Saccharose vergleichbar sind. Während sich die Zulassung für Allulose in Europa bei der European Food Safety Authority (EFSA) noch in der Beantragungsphase befindet, ist Allulose in den USA bereits zugelassen (GRAS-Status). Im Rahmen des Zulassungsverfahren wurde eine gute Verträglichkeit nachgewiesen. In Backwaren sind aufgrund der Vorgaben in der Diätverordnung (DiätV) und den funktionellen Eigenschaften des Zuckers je nach Gebäckart, der Einsatz von Alternativen begrenzt. Aus diesem Grund wurde aufbauend auf dem Forschungsprojekt „SMARBS – Smart Carbohydrates, Neuartige Zucker in Lebensmitteln“, am Max Rubner-Institut das Vorhaben „Alludivers - Charakterisierung des Einflusses von Allulose in Kombination mit verschiedenen Getreidearten und Mehltypen auf die Produktqualität von Feinen Backwaren“ durchgeführt. In dem Projekt „SMARBS“ wurden Backwaren ausschließlich mit Weizenmehl Type 550 hergestellt. Aus diesem Grund stand der Einfluss verschiedener Getreidearten und Mehltypen auf die Produktqualität von Mürbekeksen bei Verwendung von Allulose im Fokus der Untersuchungen des neuen Projektes. Dafür wurde neben Weizenmehl Type 550 auch Weizenvollkornmehl, Dinkelmehl Type 630, Dinkelvollkornmehl und Hafermehl eingesetzt. In einem Standardrezept für Mürbekekse wurde Saccharose in Schritten von 25 % durch Allulose bis zum vollständigen Austausch substituiert. Ein besonderer Fokus lag auf einer verstärkten Bräunungsreaktion und einer möglichen Verbesserung der Frischhaltung der Hefefeingebäcke beim Einsatz von Allulose. Begleitet wurden die Untersuchungen durch sensorische Analysen, wie beispielweise die Beurteilung der Farbe bei Mürbekeksen aus Weizenmehl Type 550 und Dinkelvollkornmehl anhand eines Akzeptanztests und einer Just-about-right Bewertung. Bei den gebäcktypischen Parametern: Gebäckdurchmesser, -höhe, -gewicht oder Backverlust wiesen die Gebäcke aus allen Getreidearten und Mehltypen ähnliche Veränderungen in Abhängigkeit der Allulosekonzentration auf. Unterschiede gab es vor allem bei der Bräunungsintensität zwischen Mehlen mit einem niedrigeren Ausmahlungsgrad und den Vollkornmehlen. Auch die sensorische Analyse bestätigt dies und kam darüber hinaus noch zu dem Ergebnis, dass es bei einer Teilsubstitution von 25 % Saccharose durch Allulose es zu keiner Abweichung im Bezug auf die Verbraucherakzeptanz kam. Die Untersuchungen hinsichtlich einer verbesserten Frischhaltung zeigten auf, dass diese durch den Einsatz von Allulose verbessert werden kann. Die Ergebnisse von DSC Messungen ergaben eine höhere Absenkung der Verkleisterungstemperatur der Stärke im Vergleich zu Saccharose und Fructose. Die verbesserte Frischhaltung von Hefefeingebäcken wurde durch Lagertests an Hamburger Buns, sowie durch eine deskriptive sensorische Analyse bestätigt. Die Forschungsergebnisse zeigen auf, dass Allulose nicht nur zur Reduktion des Brennwertes von Feinen Backwaren verwendet werden kann, sondern darüber hinaus auch andere techno-funktionelle Eigenschaften im Vergleich zu Zucker hat.}}, author = {{Wittland, Sebastian}}, location = {{Detmold}}, title = {{{Charakterisierung des Einflusses von Allulose in Kombination mit verschiedenen Getreidearten und Mehltypen auf die Produktqualität von Feinen Backwaren}}}, year = {{2022}}, } @misc{9203, abstract = {{Industrial heritage is among the products of modern urban development, and the influencing factors of its regeneration and development are often complex. Due to different national conditions, the research progress and approaches in industrial heritage reuse in China are different from other countries. While industrial heritage sites in Europe have become part of urban redevelopment in several regions, China still focuses mostly on single objects, lacking systematic analysis, especially at the urban scale. Regarding the city of Nanjing, an operational approach to complex urban dynamics is proposed based on a simplified analysis of official statistics, maps and GIS technology. The influence mechanisms of Nanjing’s urban planning on industrial heritage regeneration and development after 1990 are analyzed. The results show that urban growth boundaries, traffic accessibility, eco-environmental policies, population distribution, industrial renovation investment and natural resource change all have a significant impact on the abandonment and regeneration of Nanjing industrial heritage. This study expands the research perspective of industrial heritage reuse in China and proposes a clearer systematic planning strategy for the future of industrial heritage in cities.}}, author = {{Wu, Yanming and Pottgiesser, Uta and Quist, Wido and Zhou, Qi }}, booktitle = {{Land : open access journal}}, issn = {{2073-445X}}, keywords = {{urban development, mechanism of influence, industrial heritage, reuse}}, number = {{6}}, publisher = {{MDPI}}, title = {{{The Guidance and Control of Urban Planning for Reuse of Industrial Heritage: A Study of Nanjing}}}, doi = {{10.3390/land11060852}}, volume = {{11}}, year = {{2022}}, } @misc{9204, abstract = {{The development of autonomous vehicles and the integration of new information and communication technologies are making the reliability of electrical systems and components in modern vehicles increasingly important. Electrical connectors are a crucial component in an electrical on-board system. They are exposed to a wide variety of influences by the environment and operating conditions. Thus, the degradation of electrical connectors can occur. Material and surface analysis methods are the tools used to analyze the degradation mechanisms in connectors after lifetime tests, as well as in field operations. Within the framework of this study, a wide variety of methods from the analytical scope are presented and discussed. The connector surfaces degraded by different failure mechanisms are analyzed using various material and surface analysis methods. The quality and the nature of the analyses results obtained from various analysis methods are compared. Also, this study deals with the benefits and limitations, as well as the effort and the specific challenges of different material and surface analytical methods for the evaluation of failure mechanisms from the point of view of a material and surface analyst.}}, author = {{Kolmer, Philipp and Shukla, Abhay Rammurti and Song, Jian}}, booktitle = {{Technologies : open access journal}}, issn = {{2227-7080 }}, keywords = {{electrical connector, failure modes, wear, fretting corrosion, analysis, material, method}}, number = {{6}}, pages = {{124}}, publisher = {{MDPI}}, title = {{{Methods of Material and Surface Analysis for the Evaluation of Failure Modes for Electrical Connectors}}}, doi = {{https://doi.org/10.3390/technologies10060124}}, volume = {{10}}, year = {{2022}}, } @misc{9206, abstract = {{Failure in time (FIT) is an important measure for the reliability of electrical connectors. Due to the very long lifetime of connectors, the tests for the determination of FIT rate are time and labour intensive. In this paper a data driven method using a statistical process to estimate the FIT rate of electrical connectors with data of electrical contact resistance development in short term tests is proposed. The results of prediction are then compared with the results from long term tests. The study shows a strong correlation between contact resistance development in short term tests and the development of the number of failures in later stages of tests. In order to predict the development of degradation precisely, the distribution of resistance data in many different tests with different connectors is investigated. The Generalized Extreme Value Distribution, which reveals an ideal fitting, has been implemented for the prediction of the failure rates of connectors, thereby enabling a remarkable time-lapse of lifetime tests. This method can also be employed in the prognosis and management of system health through the forecast of health of connectors in different systems in operation.}}, author = {{Song, Jian and Shukla, Abhay Rammurti and Probst, Roman}}, booktitle = {{Microelectronics reliability : an internat. journal & world abstracting service}}, issn = {{0026-2714}}, keywords = {{Electrical connectors, Prediction of lifetime, FIT, Correlation between data in short and long term tests, Time-lapse of lifetime tests}}, number = {{November 2022}}, publisher = {{Elsevier}}, title = {{{Prediction of failure in time (FIT) of electrical connectors with short term tests}}}, doi = {{10.1016/j.microrel.2022.114684}}, volume = {{138}}, year = {{2022}}, } @misc{9207, abstract = {{A new acceleration model for the reliability prediction of electrical connectors has recently been published. This model enables the evaluation of failure rates gained in highly accelerated life tests (HALT) and considers thermal and vibrational loading. However, since the initial study only covered a small set of test parameters, further study of the model is required. Previous studies have sufficiently investigated the influence of the vibration test mode on the failure rate of electrical connectors. Therefore, this study now focuses on the influence of the thermal cycling test. A commonly used automotive connector is chosen and subjected to stresses in HALT covering various upper temperatures, test durations and thermal cycling frequencies. Additionally, the principles of determining the coefficient of temperature difference and the coefficient of the thermal cycling frequency are presented, since these coefficients are connector specific and required for the acceleration model. Based on the numbers of failures in test, the influence of the various thermal cycling tests is discussed, and the coefficients are calculated for the chosen connector. In conclusion a guideline to select an appropriate upper temperature and test duration in order to compare the reliability of different electrical connectors is provided.}}, author = {{Krüger, Kevin and Song, Jian}}, booktitle = {{Microelectronics reliability : an internat. journal & world abstracting service}}, issn = {{0026-2714}}, keywords = {{Electrical connectors, Life test, Thermal cycling, Upper temperature Duration, Temperature difference, Cycling frequency}}, number = {{November 2022}}, publisher = {{Elsevier}}, title = {{{The influence of thermal cycling test parameters on the failure rate of electrical connectors}}}, doi = {{https://doi.org/10.1016/j.microrel.2022.114633}}, volume = {{138}}, year = {{2022}}, } @misc{9208, author = {{Hilmert, Dirk and Song, Jian}}, location = {{Würzburg}}, title = {{{Einfluss von Mikrobewegungen auf Steckverbinder und deren robuste Auslegung II}}}, year = {{2022}}, } @misc{9209, author = {{Probst, Roman and Song, Jian}}, booktitle = {{Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen : 63. Tribologie-Fachtagung 2022, 26. bis 28. September 2022 in Göttingen}}, isbn = {{ 978-3-9817451-7-7 }}, location = {{Göttingen}}, pages = {{57/1--4}}, publisher = {{GfT Gesellschaft für Tribologie e.V.}}, title = {{{Korrelation des Kontaktwiderstands elektrischer Kontakte mit dem Verschleiß bei Reibverschleißprüfungen}}}, year = {{2022}}, } @misc{9210, abstract = {{In order to guarantee long lifetime and high performance of electrical contacts, a plating is usually applied on the base material. Silver is a promising plating material because of a good balance between performance and costs. The conventional silver plating is soft; therefore, a thick silver plating should be used to prevent the wear through during the operation. In order to enhance the wear resistance and prolong the lifetime of the silver plating, silver platings are modified by co-depositing nanoparticles with a core/shell structure into the silver matrix. A novel method to prepare the Ag (shell)@Al 2 O 3 (core) nanoparticles by galvanic process is introduced in this paper. The influence of fabrication parameters in the galvanic process such as the concentration of silver nitrate solution and the plating voltage on the silver content in the Ag@Al 2 O 3 nanoparticles is investigated. Afterwards, different concentrations of core/shell nanoparticles are co-deposited into the silver plating to study the effect of nanoparticles on the microhardness, microstructure and the lifetime of the silver plating. As a result, the microhardness and the lifetime of the silver plating are significantly improved and a favorable nanoparticle concentration exists for the longest lifetime. Moreover, the mechanism of the lifetime improvement is determined.}}, author = {{Yuan, Haomiao and Probst, Roman and Song, Jian}}, booktitle = {{Electrical contacts - 2022 : proceedings of the Sixty-Seventh IEEE Holm Conference on Electrical Contacts}}, isbn = {{978-1-6654-5966-2}}, issn = {{978-1-6654-5965-5}}, keywords = {{Nanoparticles, Resistance, Fabrication, Silver, Costs, Contacts, Voltage}}, location = {{ Tampa, FL, USA}}, pages = {{166 -- 173}}, publisher = {{IEEE}}, title = {{{Influence of Core/Shell Nanoparticles on the Fretting Behavior of Electrical Contacts}}}, doi = {{10.1109/HLM54538.2022.9969773}}, year = {{2022}}, } @misc{9211, abstract = {{Lifetime tests of connectors are time consuming and labor intensive. Our study reveals a strong correlation between the statistical characteristics of contact resistance development in the early stages of lifetime tests and the final results of the tests. This correlation enables a further time lapse of lifetime tests and the prediction of the state of the health of connectors which can be utilized in the development of diagnostic strategy in sophisticated networks with very high number of connectors as well as in a quick classification of connectors with respect to their design features. Methods of statistical evaluation are introduced and the sensitivity analyses of different characteristics for the state of health of connectors are conducted.}}, author = {{Song, Jian and Shukla, Abhay Rammurti and Probst, Roman}}, booktitle = {{Electrical contacts - 2022 : proceedings of the Sixty-Seventh IEEE Holm Conference on Electrical Contacts}}, isbn = {{978-1-6654-5966-2}}, issn = {{2158-9992}}, keywords = {{Connectors, Correlation, Sensitivity analysis, Contact resistance, Lifetime estimation, Reliability, Electrical resistance measurement}}, location = {{Tampa, FL, USA}}, pages = {{272 -- 278}}, publisher = {{IEEE}}, title = {{{State of Health of Connectors – Early Indicators}}}, doi = {{10.1109/HLM54538.2022.9969839}}, year = {{2022}}, } @misc{9213, abstract = {{The function and reliability of electrical connectors in automotive applications is crucial for vehicle safety, especially with regard to E-mobility and autonomous driving. For this reason, electrical connectors are being developed for long-term use applications. However, a small amount of function failures are still being observed in long-term use field vehicles. In this study all electrical connectors of five long-term driven vehicles from various car manufacturers are disassembled and analyzed. The same analysis procedure is followed for every vehicle and the electrical resistance of the connectors is measured to determine electrical failures. The contacts of failed connectors are further analyzed using optical microscopy, XRF spectroscopy, EDS and detailed contact resistance mapping. By comparing the connectors with electrical failures to the same types of connectors with a proper electrical resistance, failure mechanisms can be detected and analyzed. The frequency of various failure mechanisms is statistically evaluated. The results of the analysis provide valuable indications with respect to improvement of the reliability of connectors.}}, author = {{Hilmert, Dirk and Yuan, Haomiao and Song, Jian}}, booktitle = {{Electrical contacts - 2022 : proceedings of the Sixty-Seventh IEEE Holm Conference on Electrical Contacts}}, isbn = {{978-1-6654-5966-2}}, issn = {{2158-9992}}, keywords = {{Connectors, Resistance, Spectroscopy, Optical microscopy, Microscopy, Vehicle safety, Failure analysis}}, location = {{Tampa, FL, USA}}, pages = {{9 -- 16}}, publisher = {{IEEE}}, title = {{{The Analysis of Failure Mechanisms of Electrical Connectors in Long-term Use Field Vehicles}}}, doi = {{10.1109/HLM54538.2022.9969820}}, year = {{2022}}, } @misc{9233, author = {{May, Matthias}}, pages = {{76}}, publisher = {{Technische Hochschule Ostwstfalen-Lippe}}, title = {{{Auswirkung der postmodernen Identitätsfindung auf die Erzählweisen des non-linearen Spielfilms}}}, year = {{2022}}, } @misc{9256, abstract = {{In order to increase mobility in rural areas and to support public transport, an autonomous monorail vehicle (MonoCab [1]) is developed, which is able to use old unused railroad tracks. A narrow design makes it possible for two vehicles to pass each other on one track in two-way traffic. A fully automated driving mode allows the vehicle to be ordered on demand via app. Due to the design on only two wheels, monorail vehicles must be able to react quickly to environmental influences, such as wind, in order to prevent overturning. To avoid critical tilt angles during travel and ensure ride comfort, gyroscopic stabilizers and linear masses are used to hold the vehicle in the desired position in real time. In this study, the vehicle behavior is investigated by determining flow coefficients when crosswind occurs. For this purpose, a guideline from the German railroad standard DIN EN 14067-6 is applied. This standard specifies a flow around the vehicle in 5-degree increments from 0 degrees to 50 degrees, followed by 10-degree increments to 90 degrees, to simulate crosswinds from different directions. The flow vector is calculated from the vehicle speed and the wind speed, taking into account the wind angle. In order to better detect occurring instabilities at the vehicle geometry, the simulation series is calculated with the transient solver pimpleFoam. These simulations are used to generate characteristic curves using calculated moment coefficients. In addition, the pressure surge is examined, which occurs when two vehicles pass each other in oncoming traffic. This is achieved using the dynamic mesh solver overPimpleDyMFoam for overlaid meshes. Two opposing vehicles with projected track gauge spacing are defined with a linear motion function of maximum vehicle speed magnitude. During the passing of both vehicles at maximum speed, the forces and moments around the point of contact on the rail are recorded.}}, author = {{Langer, Guido and Klepp, Georg Heinrich}}, booktitle = {{10th OpenFOAM Conference}}, location = {{online}}, title = {{{CFD analysis of a monorail vehicle under the influence of crosswind and oncoming traffic}}}, year = {{2022}}, } @misc{9281, abstract = {{The four Futuro case studies (Futuro No. 000, Corfu-Futuro, Donaldson-Futuro, Munich-Futuro) presented in this journal document conservation approaches to plastic buildings and elements – in this case, glass-reinforced plastic (GRP) sandwich panels. They contribute to the definition of general conservation approaches, and at the same time reveal the knowledge gaps related to their individual histories and the necessity of a framework for managing interventions that are suited to GRP sandwich panels. The history and physical fabric of the selected Futuros, and the interventions done are compared in this article. The comparative analysis demonstrates how important it is to integrate a framework for adequate research and documentation into the conservation processes, in order to understand each building’s significance and plan the interventions accordingly. The arguments deduced from the analyses demonstrate which factors differentiate the conservation solutions of the case studies in order to reframe the Futuros’ expected life-span into a managed life-cycle.}}, author = {{Tyurkay, Ashal and Pottgiesser, Uta}}, booktitle = {{Docomomo Journal}}, issn = {{ 2773-1634}}, keywords = {{Futuro, deterioration, Conservation Management Plan (CMP), comparative analysis, plastics}}, number = {{1}}, pages = {{75--83}}, publisher = {{Docomomo International}}, title = {{{FROM DETERIORATION TO REVIVAL: Approaches to the Conservation of Plastic Buildings.}}}, volume = {{66}}, year = {{2022}}, } @misc{9287, author = {{Stork, Dominic and Lück, Sönke and Griese, Martin and Naumann, Rolf and Schulte, Thomas}}, booktitle = {{World Congress on Railway Research 2022 (WCRR 2022) Draft Technical Programme}}, location = {{Birmingham, UK}}, publisher = {{SNCF}}, title = {{{MonoCab – Simulation-based development of a running gear concept for monorail vehicles}}}, year = {{2022}}, } @misc{9294, abstract = {{The works of artist and preservation architect Jorge Otero-Pailos on experimental preservation provoke deep reflections about some of the fundamental questions dealing with heritage: temporality of objects, changeability of inscribed cultural values, the greater purpose of architectural preservation as a cultural practice, and the societal role of an architect and preservationist in formulating narratives around heritage. As the artistic installations featured in this visual essay — The Ethics of Dust (2014–2016) and Watershed Moment (2020) — demonstrate, Jorge Otero-Pailos combines various elusive elements, such as water sounds and dust, to conceive meditative and contemplative spaces. His installations invite visitors to pause and reflect on the memories, both personal, social, and environmental, that define each of us; they probe deep into the past and deep into the future. Since these are some of the issues we wanted to explore in this special issue, ‘Embodiment and Meaning-making: Interdisciplinary Perspectives on Heritage Architecture’, we invited various artists and scholars to write a very short caption in reaction to the images provided by the author through one of these three ‘lenses’: - affect, embodied experience, atmosphere; - politics of heritage; - processes of meaning-making. The results reveal the power of images to provoke imagination through atmospheric and embodied experiences, and the power of experimental heritage work to convey (political) meaning across distance and different analogue or digital media. This visual essay includes contributions from (in order of appearance): Tenna Doktor Olsen Tvedebrink, Federico De Matteis, Michael Hirschbichler, Jovana Popić, Maria De Piedade Ferreira, Uta Pottgiesser, Marcus Weisen and Brady Wagoner, with an epilogue from Jorge Otero-Pailos.}}, author = {{Jelić, A. and Staničic, A. and Tvedebrink, T. D. O. and De Matteis, F. and Hirschbichler, M. and Popić, J., and De Piedade Ferreira, Maria and Pottgiesser, Uta and Otero-Pailos, Jorge}}, booktitle = {{The Journal of Architecture}}, issn = {{1466-4410}}, number = {{4}}, pages = {{616--634}}, publisher = {{Routledge}}, title = {{{Ethics of dust: visual essay on the artistic works by Jorge Otero-Pailos}}}, doi = {{10.1080/13602365.2022.2133801}}, volume = {{27}}, year = {{2022}}, } @misc{9295, author = {{Cardinali, Marcel}}, booktitle = {{DenkReise WS 22/23 – Wohin wollen wir leben? }}, location = {{Bonn}}, publisher = {{Universität Bonn}}, title = {{{Wie wir glauben leben zu wollen und wie wir leben sollten : Gastvortrag an der Universität Bonn}}}, year = {{2022}}, } @misc{9296, abstract = {{Was sind aktuelle gesellschaftliche und klimawandelbedingte Herausforderungen der Stadtplanung? Wie kann die Natur in der Stadt eine Lösung sein? Welche politischen und planerischen Ziele leiten sich daraus ab? Und welche Beispiele der grünen Transformation aus der stadtplanerischen Praxis gibt es?}}, author = {{Cardinali, Marcel}}, booktitle = {{BDB Akademie 2022}}, title = {{{Städtebau als Lösung für gesellschaftliche Herausforderungen}}}, year = {{2022}}, } @misc{9297, author = {{Cardinali, Marcel}}, location = {{Bielefeld}}, publisher = {{Radio Hertz 87.9 (Lokalradio Bielefeld und Umgebung)}}, title = {{{Was ist eigentlich eine15-Minuten Stadt? : [Radiointerview]}}}, year = {{2022}}, } @misc{9298, author = {{Cardinali, Marcel}}, booktitle = {{Die Zukunft des Wohnens [Zeitungsbeilage 17.02.2022]}}, publisher = {{Die Zeit}}, title = {{{Alles in 15 Minuten erreichbar [Interview]}}}, year = {{2022}}, } @article{9356, abstract = {{In today’s manufacturing industry, enterprise-resource-planning (ERP) systems reach their limit when planning and scheduling production subject to multiple objectives and constraints. Advanced planning and scheduling (APS) systems provide these capabilities and are an extension for ERP systems. However, when integrating an APS and ERP system, the ERP data frequently lacks quality, hindering the APS system from working as required. This paper introduces a data quality (DQ) assessment framework that employs a Bayesian Network (BN) to perform quick DQ assessments based on expert interviews and DQ measurements with actual ERP data. We explain the BN’s functionality, design, and validation and show how using the perceived DQ of experts and a semi-supervised learning algorithm improves the BN’s predictions over time. We discuss applying our framework in an APS system implementation project involving an APS system provider and a medium-sized manufacturer of hydraulic cylinders. Despite considering the DQ assessment framework in such a specific context, it is not restricted to a particular domain. We close by discussing the framework’s limits, particularly the BN as a DQ assessment methodology and future works to improve its performance.}}, author = {{Herrmann, Jan-Phillip and Tackenberg, Sven and Padoano, Elio and Hartlief, Jörg and Rautenstengel, Jens and Loeser, Christine and Böhme, Jörg }}, issn = {{1877-0509 }}, journal = {{Procedia Computer Science}}, keywords = {{Data Quality Assessment, Advanced Planning, Scheduling, Bayesian Network, Enterprise Resource Planning}}, pages = {{194--204}}, publisher = {{Elsevier}}, title = {{{An ERP Data Quality Assessment Framework for the Implementation of an APS system using Bayesian Networks}}}, doi = {{https://doi.org/10.1016/j.procs.2022.01.218}}, volume = {{200}}, year = {{2022}}, } @misc{9359, abstract = {{In der Entwicklung und Produktion von Produkten sind heute eine Vielzahl von Akteuren involviert, wodurch diese Prozesse an Komplexität zunehmen. Besonders in der digitalen Darstellung von Produkten über ihren gesamten Lebenszyklus sind die Wirkbeziehungen zwischen Hard- und Software beziehungsweise zwischen Bauteilen und den dafür erforderlichen Produktionsprozessen kaum bekannt. Erhöhte Entwicklungskosten und Terminüberschreitungen sind daher gerade im Umfeld von KMUs eher die Regel statt die Ausnahme. Das vom BMBF geförderte Forschungsprojekt FuPEP (Funktionsorientiertes Komplexitätsmanagement in allen Phasen der Produktentstehung) adressiert diese Problemstellung, indem ein Ansatz zur Handhabung des Komplexitätsmanagements auf Basis der Design Structure Matrix (DSM) und der Industrie-4.0-Verwaltungsschale (VWS bzw. engl. Asset Administration Shell, AAS) entwickelt wird [1]. Abbildung 1 zeigt die grundsätzliche FuPEP-Softwarestruktur und die Rolle von DSM und VWS. Der vorliegende Artikel erläutert zum einen das Konzept der DSM und zum anderen wie eine DSM als VWS-Teilmodell abgebildet werden kann.}}, author = {{Imort, Sebastian and Pankrath, Carolin and Herrmann, Jan-Phillip and Deuter, Andreas}}, booktitle = {{atp magazin}}, issn = {{2625-4212}}, number = {{11-12}}, pages = {{26--29}}, publisher = {{Vulkan-Verlag GmbH}}, title = {{{Verwaltungsschale: Integration einer Design Structure Matrix (DSM) in die VWS}}}, volume = {{63}}, year = {{2022}}, } @misc{9360, abstract = {{Background: Errors can have dangerous consequences, resulting in a preventive strategy in most company-based technical vocational education and training (TVET). On the contrary, errors provide a useful opportunity for learning due to mismatches of mental models and reality and especially to improve occupational safety and health (OSH). Objective: This article presents a didactic concept for developing a learning system based on learning from errors. Learners shall directly experience the consequences of erroneous actions through presenting error consequences in augmented reality to avoid negative, dangerous, or cost-intensive outcomes. Methods: Empirical data prove errors to be particularly effective in TVET. A formal description of a work system is systematically adopted to outline a connection between work, errors concerning OSH, and a didactic concept. A proof-of-concept systematically performs a use case for the developed learning system. It supports critical reflections from a technical, safety, and didactical perspective, naming implications and limitations. Results: By learning from errors, a work-based didactic concept supports OSH competencies relying on a learning system. The latter integrates digital twins of the work system to simulate and visualise dangerous error consequences for identified erroneous actions in a technical proof-of-concept. Results demonstrate the ability to detect action errors in work processes and simulations of error consequences in augmented reality. Conclusion: The technical learning system for OSH education extends existing learning approaches by showcasing virtual consequences. However, capabilities are limited regarding prepared learning scenarios with predefined critical errors. Future studies should assess learning effectiveness in an industrial scenario and investigate its usability.}}, author = {{Goppold, Marvin and Herrmann, Jan-Phillip and Tackenberg, Sven and Brandl, Christopher and Nitsch , Verena}}, booktitle = {{Work}}, issn = {{1875-9270 }}, keywords = {{Vocational education, digital twin, work system design}}, number = {{4}}, pages = {{1563--1575}}, publisher = {{IOS Press}}, title = {{{An error-based augmented reality learning system for work-based occupational safety and health education}}}, doi = {{10.3233/WOR-211243}}, volume = {{72}}, year = {{2022}}, } @book{9415, editor = {{Riedl, Ulrich}}, pages = {{149}}, publisher = {{SubstainableCampus Höxter}}, title = {{{Natur und Landschaft sind ... ja was? Und überhaupt: wozu?}}}, year = {{2022}}, } @misc{9416, author = {{Upmann, Matthias and Weyland, Gerd}}, booktitle = {{Fleischwirtschaft}}, issn = {{0015-363X }}, location = {{Lemgo}}, number = {{11}}, pages = {{42--46}}, publisher = {{dfv-Mediengruppe, Dt. Fachverl. }}, title = {{{Was ist erlaubt, was verboten?}}}, volume = {{101}}, year = {{2022}}, } @misc{9417, author = {{Upmann, Matthias and Weyland, Gerd}}, booktitle = {{Fleischwirtschaft}}, issn = {{0015-363X}}, location = {{Lemgo}}, number = {{12}}, pages = {{50--55}}, publisher = {{dfv-Mediengruppe, Dt. Fachverl.}}, title = {{{Was ist erlaubt, was verboten?}}}, volume = {{101}}, year = {{2022}}, } @misc{9419, author = {{Upmann, Matthias and Stiebing, Achim}}, location = {{Lemgo}}, title = {{{In eigener Sache: Studium der Fleischtechnologie gestern - heute - morgen }}}, year = {{2022}}, } @misc{9420, abstract = {{Larger processing equipment to produce minced meat could affect its structure due to intensive processing and a high energy intake in the meat mass. To assess if this would result in alterations in the minced meat quality, finely chopped meat (FCM) was added in different concentrations (15, 30, 45, 60, 75, 90, and 100%) to minced meat and quality parameters were analyzed. FCM was used to simulate different intensity of an unintended destruction of meat cells due to various processes. The amount of non-intact cells (ANIC) was determined histologically and furthermore, soluble protein content, water holding capacity, mechanical and sensory texture, and scanning electron and confocal laser scanning microscopy was applied to analyze the meat structure and quality. ANIC indicated that even adding 15% FCM was statistically (p < 0.05) distinguishable from 100% minced meat and 30% FCM had already 50 Vol.-% ANIC. In contrast, the addition of 15% or 30% FCM did not result in significant differences in drip loss of raw and cooked meat as well as mechanical and sensory texture analysis. This study showed that intensive processing might be detectable via ANIC, but that the minced meat quality was not affected.}}, author = {{Witte , Franziska and Sawas , Erik and Berger , Lisa M. and Gibis , Monika and Weiss, Jochen and Röser, Anja and Upmann, Matthias and Joeres, Eike and Juadjur , Andreas and Bindrich , Ute and Heinz , Volker and Terjung, Nino}}, booktitle = {{Applied Sciences}}, issn = {{2076-3417 }}, keywords = {{minced pork, industrial meat processing, quality characterization, techno-functional properties of minced pork, structural modification}}, number = {{12}}, publisher = {{MDPI}}, title = {{{Influence of Finely Chopped Meat Addition on Quality Parameters of Minced Meat}}}, doi = {{https://doi.org/10.3390/app122010590}}, volume = {{20}}, year = {{2022}}, } @misc{9421, author = {{Tholen, Janna and Mohr, Jessica and Bruns, Michael and Schulze Althoff, Gereon and Upmann, Matthias}}, location = {{Garmisch-Partenkirchen}}, title = {{{Kontaminationen während des Schlachtprozesses auf Schweineschlachtkörpern}}}, year = {{2022}}, } @misc{9427, author = {{Kümmel, Jens and Nordhoff, Daniel}}, booktitle = {{das Wirtschaftsstudium- wisu: Zeitschrift für Ausbildung, Prüfung, Berufseinstieg und Fortbildung}}, issn = {{0340-3084}}, keywords = {{Umwandlungen, Umwandlungsgesetz, Rechtsformen}}, number = {{10}}, pages = {{1046--1053}}, publisher = {{Lange Verlag GmbH & Co.KG}}, title = {{{Unternehmensumwandlungen}}}, year = {{2022}}, } @proceedings{9440, editor = {{Noosten, Dirk}}, isbn = {{978-3-9816586-4-4}}, issn = {{2510-7321}}, location = {{Detmold}}, pages = {{80}}, publisher = {{Noosten-Verlag}}, title = {{{Bewertung von Immobilien. 25. Symposium für Immobilienbewertung : Tagungsband}}}, year = {{2022}}, } @inbook{9463, author = {{Ajib, Salman}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{11--13}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Natur, Landschaft und Menschheit - eine Gedankenreise in Bildern aus dem Vorderen Orient}}}, year = {{2022}}, } @inbook{9464, author = {{Aland, Ute}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{14--15}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Ich bin ein Gott auf Erden}}}, year = {{2022}}, } @inbook{9465, author = {{Althaus, Christoph}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{19--21}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Natur und Landschaft als Zuflucht, Heimat und Auftrag}}}, year = {{2022}}, } @inbook{9466, author = {{Asche, Norbert}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{22--25}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Überlegungen zu Natur, Landschaft und Ökologie}}}, year = {{2022}}, } @inbook{9467, author = {{Beinlich, Burkhard}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{26--28}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Natur und Landschaft aus dem Blickwinkel eines Evolutions-Biologen und Naturschützers}}}, year = {{2022}}, } @inbook{9468, author = {{Berens, Stefan}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{29--31}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Tempus fugit - Die Zeit schreitet voran! - Alles wird gut??}}}, year = {{2022}}, } @inbook{9469, author = {{Bochnig, Stefan}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{35--28}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Natur, Landschaft und städtischer Freiraum - Bruchstücke eines lebenslangen Disjurses}}}, year = {{2022}}, } @inbook{9470, author = {{Fettig, Joachim}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{44--46}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Natur und Landschaft in Mittelnorwegen}}}, year = {{2022}}, } @inbook{9471, author = {{Gabriel, Maria Alejandra and Rubart, Jessica}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{47--49}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Natur, Landschaft und Umwelt in einer digitalisierten Welt}}}, year = {{2022}}, } @inbook{9472, author = {{von Holten, Malte}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{61--64}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Was ist und was bedeutet mir Natur?}}}, year = {{2022}}, } @inbook{9473, author = {{Huxmann, Nora Johanna}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{68--70}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Mein Herz schlägt für ... die Pflanzenverwendung. Und Natur. Landschaft auch.}}}, year = {{2022}}, } @inbook{9474, author = {{Kaußen, Lucas}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{71--72}}, publisher = {{SubstainableCampus Höxter}}, title = {{{Natur und Landschaft sind unsere täglichen Begleiter!}}}, year = {{2022}}, } @inbook{9475, author = {{Knepper-Bartel, Yvonne-Christin}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{73--75}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Naturschutz und Zufriedenheit}}}, year = {{2022}}, } @inbook{9476, author = {{Krahl, Jürgen}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{76--80}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Antworten auf drei Fragen von Professor Riedl}}}, year = {{2022}}, } @inbook{9477, author = {{Lohr, Mathias}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{81--84}}, publisher = {{SubstainableCampus Höxter}}, title = {{{Von der Sehnsucht nach Landschaften, Pflanzen und Tieren}}}, year = {{2022}}, } @inbook{9478, author = {{Maas, Klaus}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{85--87}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Eine Sicht auf Natur und Landschaft (und Meer)}}}, year = {{2022}}, } @inbook{9479, author = {{Maßmeyer, Klaus}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{91--93}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{"Dem Anwenden muss das Erkennen vorausgehen" (Max Planck)}}}, year = {{2022}}, } @inbook{9480, author = {{Oldenburg, Martin}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{94--96}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Vom Pott nach Polier}}}, year = {{2022}}, } @inbook{9481, author = {{Rathke, Klaas}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{97--98}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Die Kraft des Wassers}}}, year = {{2022}}, } @inbook{9482, author = {{Riedl, Ulrich}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{99--102}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Verbundenheit im "Alter Ego" - Verantwortung für mein zweites Selbst}}}, year = {{2022}}, } @inbook{9483, author = {{Rohler, Hans-Peter}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{106--108}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{[Was ist und was bedeutet mir Natur]}}}, year = {{2022}}, } @inbook{9484, author = {{Sommerhäuser, Mario}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{112--115}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Meine Natur und Landschaft - am Niederrhein}}}, year = {{2022}}, } @inbook{9485, author = {{Stemmer, Boris}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{120--122}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Landschaft und Natur}}}, year = {{2022}}, } @inbook{9486, author = {{Timmer, Mirco}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{123--125}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Gedanken zu den drei Fragen:}}}, year = {{2022}}, } @inbook{9487, author = {{Türk, Winfried}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{126--129}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Bruchschollenland zwischen Rhön und Thüringer Wald}}}, year = {{2022}}, } @inbook{9488, author = {{Winking, Lars}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{136--138}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Was ist und was bedeutet mir Natur?}}}, year = {{2022}}, } @inbook{9489, author = {{Wolf, Stefan}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{142--144}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Gedanken-Bild}}}, year = {{2022}}, } @misc{9507, author = {{Stasch, Jessica}}, pages = {{75}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Konzeption, Gestaltung und Realisation eines Buches zum Thema Ayurveda}}}, year = {{2022}}, } @misc{9568, abstract = {{Pellet production is a multi-step manufacturing process comprising granulation, extrusion and spheronisation. The first step represents a critical control point, since the quality of the granule mass highly influences subsequent process steps and, consequently, the quality of final pellets. The most important parameter of wet granulation is the liquid requirement, which can often only be quantitatively evaluated after further process steps. To identify an alternative for optimal liquid requirements, experiments were conducted with a formulation based on lactose and microcrystalline cellulose. Granules were analyzed with a Powder Vertical Shear Rig. We identified the compression density (ρpress) as the said alternative, linking information from the powder material and the moisture content (R2 = 0.995). We used ρpress to successfully predict liquid requirements for unknown formulation compositions. By means of this prediction, pellets with high quality, regarding shape and size distribution, were produced by carrying out a multi-step manufacturing process. Furthermore, the applicability of ρpress as an alternative quality parameter to other placebo formulations and to formulations containing active pharmaceutical ingredients (APIs) was demonstrated.}}, author = {{Ramm, Selina and Fulek, Ruwen and Eberle, Veronika Anna and Kiera, Christian and Odefey, Ulrich and Pein-Hackelbusch, Miriam}}, booktitle = {{Pharmaceutics}}, issn = {{1999-4923}}, keywords = {{wet granulation, liquid requirement, granulation endpoint, compression density}}, number = {{11}}, publisher = {{MDPI}}, title = {{{Compression Density as an Alternative to Identify an Optimal Moisture Content for High Shear Wet Granulation as an Initial Step for Spheronisation.}}}, doi = {{https://doi.org/10.3390/pharmaceutics14112303}}, volume = {{14}}, year = {{2022}}, } @misc{9660, author = {{Brand, Henry}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Kohärenz in experimentellen Werken}}}, year = {{2022}}, } @inproceedings{9666, abstract = {{In mechanical engineering, individual functional units of a machine are often assembled by one operator at single workstations or at one-piece flow lines. Based on the order information, the required parts are taken from flow racks and assembled step by step to build a functional unit. The existing assembly concepts have two decisive disadvantages in operational practice. First, a large number of components to be provided leads to long walking distances at the work station or line. Second, as the complexity of the assembly task increases, the informational portion of the work increases, so that paper-based information provision can lead to unnecessary assembly errors and additional times. For these reasons, a compacted assembly system has been developed in which, firstly, material is supplied via driven carousels and, secondly, the necessary information is provided to the operator via a cognitive assistance system. The article shows that this concept can reduce walking distances while avoiding assembly errors and additional times.}}, author = {{Hinrichsen, Sven and Nikolenko, Alexander and Beckmann, Nils and Meyer, Frederic}}, booktitle = {{IEEM2022 : IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : Kuala Lumpur, Malaysia, 07-10 December 2022 }}, isbn = {{978-1-6654-8688-0}}, keywords = {{assembly system, assistance system, complexity}}, location = {{Kuala Lumpur}}, publisher = {{IEEE}}, title = {{{Development of a New Type of Carousel-based Compacted Work System for Mixed-model Assembly in Mechanical Engineering}}}, doi = {{10.1109/ieem55944.2022.9989731}}, year = {{2022}}, } @inbook{9668, abstract = {{Das in dem Beitrag dargestellte Projekt beschreibt die Reorganisation eines Produktionsbereichs bei dem Unternehmen Phoenix Contact, bei der Mensch, Organisation und Technik gleichermaßen berücksichtigt wurden. In dem Kapitel wird dabei ein Vorgehen erläutert, wie veränderte Anforderungen an Qualifikationen, die durch neue Technologien und Organisationsformen verursacht wurden, effizient ermittelt und umgesetzt werden können.}}, author = {{Kleineberg, Tim and Hinrichsen, Sven and Lütkemeier, Klaus}}, booktitle = {{Gestaltung digitalisierter Arbeitswelten}}, editor = {{Dumitrescu, Roman}}, isbn = {{9783662580134}}, issn = {{2523-3637}}, pages = {{49--62}}, publisher = {{Springer}}, title = {{{Zukunftswerkstatt COMBICON – PHOENIX CONTACT}}}, doi = {{10.1007/978-3-662-58014-1_4}}, year = {{2022}}, } @inbook{9669, abstract = {{Für eine erfolgreiche Einführung von Assistenzsystemen in der Produktion bedarf es eines nutzerzentrierten Einführungsprozesses. Der erarbeitete Einführungs- und Gestaltungsprozess ist einerseits auf Basis einer Auswertung von Literatur und andererseits über Interviews zum durchgeführten Projekt und einer Reihe von Workshops entstanden. Damit wird die Lücke eines fehlenden Einführungsprozesses geschlossen. Zusätzlicher Nutzen besteht in der ganzheitlichen Betrachtung des Einführungsprozesses. Mensch, Organisation und Technik werden gleichermaßen im Soll-Prozess berücksichtigt. Der Prozess ermöglicht ferner die Entwicklung einer aktiven partnerschaftlichen Zusammenarbeit zwischen Anwendern, Führungskräften und Betriebsräten in solchen Projekten.}}, author = {{Kleineberg, Tim and Hinrichsen, Sven and Busch, Felix}}, booktitle = {{Gestaltung digitalisierter Arbeitswelten}}, editor = {{Dumitrescu, Roman}}, isbn = {{9783662580134}}, issn = {{2523-3637}}, pages = {{63--77}}, publisher = {{Springer}}, title = {{{Entwicklung eines Leitfadens für die Einführung von Werkerassistenzsystemen :Ganzheitliche Einführung von Assistenzsystemen in der Montage: Integration von Technikgestaltung, Change Management-Erfolgsfaktoren und Beteiligung der Betriebsparteien}}}, doi = {{10.1007/978-3-662-58014-1_5}}, year = {{2022}}, } @misc{9690, author = {{Beckmann, Julia}}, pages = {{77}}, publisher = {{Technische Hochschule Ostwestfalen Lippe}}, title = {{{Nachhaltigkeit in der deutschen Film- und Fernsehproduktion}}}, year = {{2022}}, } @book{9934, editor = {{Kost, Susanne and Petrow, Constanze A.}}, isbn = {{978-3-658-37517-1}}, location = {{ Geisenheim}}, pages = {{343}}, publisher = {{Springer Fachmedien Wiesbaden}}, title = {{{Kulturelle Vielfalt in Freiraum und Landschaft: Wahrnehmung, Partizipation, Aneignung und Gestaltung }}}, doi = {{https://doi.org/10.1007/978-3-658-37518-8}}, year = {{2022}}, } @misc{9997, abstract = {{[Jörg Felmeden ist als Autor nicht im Dokument erwähnt]}}, author = {{Felmeden, Jörg}}, pages = {{103}}, publisher = {{Hessisches Ministerium für Umwelt, Klimaschutz, landwirtschaft und Verbraucherschutz}}, title = {{{Zukunftsplan Wasser - Wasserwirtschaftlicher Fachplan Hessen}}}, year = {{2022}}, }