@misc{9256, abstract = {{In order to increase mobility in rural areas and to support public transport, an autonomous monorail vehicle (MonoCab [1]) is developed, which is able to use old unused railroad tracks. A narrow design makes it possible for two vehicles to pass each other on one track in two-way traffic. A fully automated driving mode allows the vehicle to be ordered on demand via app. Due to the design on only two wheels, monorail vehicles must be able to react quickly to environmental influences, such as wind, in order to prevent overturning. To avoid critical tilt angles during travel and ensure ride comfort, gyroscopic stabilizers and linear masses are used to hold the vehicle in the desired position in real time. In this study, the vehicle behavior is investigated by determining flow coefficients when crosswind occurs. For this purpose, a guideline from the German railroad standard DIN EN 14067-6 is applied. This standard specifies a flow around the vehicle in 5-degree increments from 0 degrees to 50 degrees, followed by 10-degree increments to 90 degrees, to simulate crosswinds from different directions. The flow vector is calculated from the vehicle speed and the wind speed, taking into account the wind angle. In order to better detect occurring instabilities at the vehicle geometry, the simulation series is calculated with the transient solver pimpleFoam. These simulations are used to generate characteristic curves using calculated moment coefficients. In addition, the pressure surge is examined, which occurs when two vehicles pass each other in oncoming traffic. This is achieved using the dynamic mesh solver overPimpleDyMFoam for overlaid meshes. Two opposing vehicles with projected track gauge spacing are defined with a linear motion function of maximum vehicle speed magnitude. During the passing of both vehicles at maximum speed, the forces and moments around the point of contact on the rail are recorded.}}, author = {{Langer, Guido and Klepp, Georg Heinrich}}, booktitle = {{10th OpenFOAM Conference}}, location = {{online}}, title = {{{CFD analysis of a monorail vehicle under the influence of crosswind and oncoming traffic}}}, year = {{2022}}, } @misc{9281, abstract = {{The four Futuro case studies (Futuro No. 000, Corfu-Futuro, Donaldson-Futuro, Munich-Futuro) presented in this journal document conservation approaches to plastic buildings and elements – in this case, glass-reinforced plastic (GRP) sandwich panels. They contribute to the definition of general conservation approaches, and at the same time reveal the knowledge gaps related to their individual histories and the necessity of a framework for managing interventions that are suited to GRP sandwich panels. The history and physical fabric of the selected Futuros, and the interventions done are compared in this article. The comparative analysis demonstrates how important it is to integrate a framework for adequate research and documentation into the conservation processes, in order to understand each building’s significance and plan the interventions accordingly. The arguments deduced from the analyses demonstrate which factors differentiate the conservation solutions of the case studies in order to reframe the Futuros’ expected life-span into a managed life-cycle.}}, author = {{Tyurkay, Ashal and Pottgiesser, Uta}}, booktitle = {{Docomomo Journal}}, issn = {{ 2773-1634}}, keywords = {{Futuro, deterioration, Conservation Management Plan (CMP), comparative analysis, plastics}}, number = {{1}}, pages = {{75--83}}, publisher = {{Docomomo International}}, title = {{{FROM DETERIORATION TO REVIVAL: Approaches to the Conservation of Plastic Buildings.}}}, volume = {{66}}, year = {{2022}}, } @misc{9287, author = {{Stork, Dominic and Lück, Sönke and Griese, Martin and Naumann, Rolf and Schulte, Thomas}}, booktitle = {{World Congress on Railway Research 2022 (WCRR 2022) Draft Technical Programme}}, location = {{Birmingham, UK}}, publisher = {{SNCF}}, title = {{{MonoCab – Simulation-based development of a running gear concept for monorail vehicles}}}, year = {{2022}}, } @misc{9294, abstract = {{The works of artist and preservation architect Jorge Otero-Pailos on experimental preservation provoke deep reflections about some of the fundamental questions dealing with heritage: temporality of objects, changeability of inscribed cultural values, the greater purpose of architectural preservation as a cultural practice, and the societal role of an architect and preservationist in formulating narratives around heritage. As the artistic installations featured in this visual essay — The Ethics of Dust (2014–2016) and Watershed Moment (2020) — demonstrate, Jorge Otero-Pailos combines various elusive elements, such as water sounds and dust, to conceive meditative and contemplative spaces. His installations invite visitors to pause and reflect on the memories, both personal, social, and environmental, that define each of us; they probe deep into the past and deep into the future. Since these are some of the issues we wanted to explore in this special issue, ‘Embodiment and Meaning-making: Interdisciplinary Perspectives on Heritage Architecture’, we invited various artists and scholars to write a very short caption in reaction to the images provided by the author through one of these three ‘lenses’: - affect, embodied experience, atmosphere; - politics of heritage; - processes of meaning-making. The results reveal the power of images to provoke imagination through atmospheric and embodied experiences, and the power of experimental heritage work to convey (political) meaning across distance and different analogue or digital media. This visual essay includes contributions from (in order of appearance): Tenna Doktor Olsen Tvedebrink, Federico De Matteis, Michael Hirschbichler, Jovana Popić, Maria De Piedade Ferreira, Uta Pottgiesser, Marcus Weisen and Brady Wagoner, with an epilogue from Jorge Otero-Pailos.}}, author = {{Jelić, A. and Staničic, A. and Tvedebrink, T. D. O. and De Matteis, F. and Hirschbichler, M. and Popić, J., and De Piedade Ferreira, Maria and Pottgiesser, Uta and Otero-Pailos, Jorge}}, booktitle = {{The Journal of Architecture}}, issn = {{1466-4410}}, number = {{4}}, pages = {{616--634}}, publisher = {{Routledge}}, title = {{{Ethics of dust: visual essay on the artistic works by Jorge Otero-Pailos}}}, doi = {{10.1080/13602365.2022.2133801}}, volume = {{27}}, year = {{2022}}, } @misc{9295, author = {{Cardinali, Marcel}}, booktitle = {{DenkReise WS 22/23 – Wohin wollen wir leben? }}, location = {{Bonn}}, publisher = {{Universität Bonn}}, title = {{{Wie wir glauben leben zu wollen und wie wir leben sollten : Gastvortrag an der Universität Bonn}}}, year = {{2022}}, } @misc{9296, abstract = {{Was sind aktuelle gesellschaftliche und klimawandelbedingte Herausforderungen der Stadtplanung? Wie kann die Natur in der Stadt eine Lösung sein? Welche politischen und planerischen Ziele leiten sich daraus ab? Und welche Beispiele der grünen Transformation aus der stadtplanerischen Praxis gibt es?}}, author = {{Cardinali, Marcel}}, booktitle = {{BDB Akademie 2022}}, title = {{{Städtebau als Lösung für gesellschaftliche Herausforderungen}}}, year = {{2022}}, } @misc{9297, author = {{Cardinali, Marcel}}, location = {{Bielefeld}}, publisher = {{Radio Hertz 87.9 (Lokalradio Bielefeld und Umgebung)}}, title = {{{Was ist eigentlich eine15-Minuten Stadt? : [Radiointerview]}}}, year = {{2022}}, } @misc{9298, author = {{Cardinali, Marcel}}, booktitle = {{Die Zukunft des Wohnens [Zeitungsbeilage 17.02.2022]}}, publisher = {{Die Zeit}}, title = {{{Alles in 15 Minuten erreichbar [Interview]}}}, year = {{2022}}, } @article{9356, abstract = {{In today’s manufacturing industry, enterprise-resource-planning (ERP) systems reach their limit when planning and scheduling production subject to multiple objectives and constraints. Advanced planning and scheduling (APS) systems provide these capabilities and are an extension for ERP systems. However, when integrating an APS and ERP system, the ERP data frequently lacks quality, hindering the APS system from working as required. This paper introduces a data quality (DQ) assessment framework that employs a Bayesian Network (BN) to perform quick DQ assessments based on expert interviews and DQ measurements with actual ERP data. We explain the BN’s functionality, design, and validation and show how using the perceived DQ of experts and a semi-supervised learning algorithm improves the BN’s predictions over time. We discuss applying our framework in an APS system implementation project involving an APS system provider and a medium-sized manufacturer of hydraulic cylinders. Despite considering the DQ assessment framework in such a specific context, it is not restricted to a particular domain. We close by discussing the framework’s limits, particularly the BN as a DQ assessment methodology and future works to improve its performance.}}, author = {{Herrmann, Jan-Phillip and Tackenberg, Sven and Padoano, Elio and Hartlief, Jörg and Rautenstengel, Jens and Loeser, Christine and Böhme, Jörg }}, issn = {{1877-0509 }}, journal = {{Procedia Computer Science}}, keywords = {{Data Quality Assessment, Advanced Planning, Scheduling, Bayesian Network, Enterprise Resource Planning}}, pages = {{194--204}}, publisher = {{Elsevier}}, title = {{{An ERP Data Quality Assessment Framework for the Implementation of an APS system using Bayesian Networks}}}, doi = {{https://doi.org/10.1016/j.procs.2022.01.218}}, volume = {{200}}, year = {{2022}}, } @misc{9359, abstract = {{In der Entwicklung und Produktion von Produkten sind heute eine Vielzahl von Akteuren involviert, wodurch diese Prozesse an Komplexität zunehmen. Besonders in der digitalen Darstellung von Produkten über ihren gesamten Lebenszyklus sind die Wirkbeziehungen zwischen Hard- und Software beziehungsweise zwischen Bauteilen und den dafür erforderlichen Produktionsprozessen kaum bekannt. Erhöhte Entwicklungskosten und Terminüberschreitungen sind daher gerade im Umfeld von KMUs eher die Regel statt die Ausnahme. Das vom BMBF geförderte Forschungsprojekt FuPEP (Funktionsorientiertes Komplexitätsmanagement in allen Phasen der Produktentstehung) adressiert diese Problemstellung, indem ein Ansatz zur Handhabung des Komplexitätsmanagements auf Basis der Design Structure Matrix (DSM) und der Industrie-4.0-Verwaltungsschale (VWS bzw. engl. Asset Administration Shell, AAS) entwickelt wird [1]. Abbildung 1 zeigt die grundsätzliche FuPEP-Softwarestruktur und die Rolle von DSM und VWS. Der vorliegende Artikel erläutert zum einen das Konzept der DSM und zum anderen wie eine DSM als VWS-Teilmodell abgebildet werden kann.}}, author = {{Imort, Sebastian and Pankrath, Carolin and Herrmann, Jan-Phillip and Deuter, Andreas}}, booktitle = {{atp magazin}}, issn = {{2625-4212}}, number = {{11-12}}, pages = {{26--29}}, publisher = {{Vulkan-Verlag GmbH}}, title = {{{Verwaltungsschale: Integration einer Design Structure Matrix (DSM) in die VWS}}}, volume = {{63}}, year = {{2022}}, } @misc{9360, abstract = {{Background: Errors can have dangerous consequences, resulting in a preventive strategy in most company-based technical vocational education and training (TVET). On the contrary, errors provide a useful opportunity for learning due to mismatches of mental models and reality and especially to improve occupational safety and health (OSH). Objective: This article presents a didactic concept for developing a learning system based on learning from errors. Learners shall directly experience the consequences of erroneous actions through presenting error consequences in augmented reality to avoid negative, dangerous, or cost-intensive outcomes. Methods: Empirical data prove errors to be particularly effective in TVET. A formal description of a work system is systematically adopted to outline a connection between work, errors concerning OSH, and a didactic concept. A proof-of-concept systematically performs a use case for the developed learning system. It supports critical reflections from a technical, safety, and didactical perspective, naming implications and limitations. Results: By learning from errors, a work-based didactic concept supports OSH competencies relying on a learning system. The latter integrates digital twins of the work system to simulate and visualise dangerous error consequences for identified erroneous actions in a technical proof-of-concept. Results demonstrate the ability to detect action errors in work processes and simulations of error consequences in augmented reality. Conclusion: The technical learning system for OSH education extends existing learning approaches by showcasing virtual consequences. However, capabilities are limited regarding prepared learning scenarios with predefined critical errors. Future studies should assess learning effectiveness in an industrial scenario and investigate its usability.}}, author = {{Goppold, Marvin and Herrmann, Jan-Phillip and Tackenberg, Sven and Brandl, Christopher and Nitsch , Verena}}, booktitle = {{Work}}, issn = {{1875-9270 }}, keywords = {{Vocational education, digital twin, work system design}}, number = {{4}}, pages = {{1563--1575}}, publisher = {{IOS Press}}, title = {{{An error-based augmented reality learning system for work-based occupational safety and health education}}}, doi = {{10.3233/WOR-211243}}, volume = {{72}}, year = {{2022}}, } @book{9415, editor = {{Riedl, Ulrich}}, pages = {{149}}, publisher = {{SubstainableCampus Höxter}}, title = {{{Natur und Landschaft sind ... ja was? Und überhaupt: wozu?}}}, year = {{2022}}, } @misc{9416, author = {{Upmann, Matthias and Weyland, Gerd}}, booktitle = {{Fleischwirtschaft}}, issn = {{0015-363X }}, location = {{Lemgo}}, number = {{11}}, pages = {{42--46}}, publisher = {{dfv-Mediengruppe, Dt. Fachverl. }}, title = {{{Was ist erlaubt, was verboten?}}}, volume = {{101}}, year = {{2022}}, } @misc{9417, author = {{Upmann, Matthias and Weyland, Gerd}}, booktitle = {{Fleischwirtschaft}}, issn = {{0015-363X}}, location = {{Lemgo}}, number = {{12}}, pages = {{50--55}}, publisher = {{dfv-Mediengruppe, Dt. Fachverl.}}, title = {{{Was ist erlaubt, was verboten?}}}, volume = {{101}}, year = {{2022}}, } @misc{9419, author = {{Upmann, Matthias and Stiebing, Achim}}, location = {{Lemgo}}, title = {{{In eigener Sache: Studium der Fleischtechnologie gestern - heute - morgen }}}, year = {{2022}}, } @misc{9420, abstract = {{Larger processing equipment to produce minced meat could affect its structure due to intensive processing and a high energy intake in the meat mass. To assess if this would result in alterations in the minced meat quality, finely chopped meat (FCM) was added in different concentrations (15, 30, 45, 60, 75, 90, and 100%) to minced meat and quality parameters were analyzed. FCM was used to simulate different intensity of an unintended destruction of meat cells due to various processes. The amount of non-intact cells (ANIC) was determined histologically and furthermore, soluble protein content, water holding capacity, mechanical and sensory texture, and scanning electron and confocal laser scanning microscopy was applied to analyze the meat structure and quality. ANIC indicated that even adding 15% FCM was statistically (p < 0.05) distinguishable from 100% minced meat and 30% FCM had already 50 Vol.-% ANIC. In contrast, the addition of 15% or 30% FCM did not result in significant differences in drip loss of raw and cooked meat as well as mechanical and sensory texture analysis. This study showed that intensive processing might be detectable via ANIC, but that the minced meat quality was not affected.}}, author = {{Witte , Franziska and Sawas , Erik and Berger , Lisa M. and Gibis , Monika and Weiss, Jochen and Röser, Anja and Upmann, Matthias and Joeres, Eike and Juadjur , Andreas and Bindrich , Ute and Heinz , Volker and Terjung, Nino}}, booktitle = {{Applied Sciences}}, issn = {{2076-3417 }}, keywords = {{minced pork, industrial meat processing, quality characterization, techno-functional properties of minced pork, structural modification}}, number = {{12}}, publisher = {{MDPI}}, title = {{{Influence of Finely Chopped Meat Addition on Quality Parameters of Minced Meat}}}, doi = {{https://doi.org/10.3390/app122010590}}, volume = {{20}}, year = {{2022}}, } @misc{9421, author = {{Tholen, Janna and Mohr, Jessica and Bruns, Michael and Schulze Althoff, Gereon and Upmann, Matthias}}, location = {{Garmisch-Partenkirchen}}, title = {{{Kontaminationen während des Schlachtprozesses auf Schweineschlachtkörpern}}}, year = {{2022}}, } @misc{9427, author = {{Kümmel, Jens and Nordhoff, Daniel}}, booktitle = {{das Wirtschaftsstudium- wisu: Zeitschrift für Ausbildung, Prüfung, Berufseinstieg und Fortbildung}}, issn = {{0340-3084}}, keywords = {{Umwandlungen, Umwandlungsgesetz, Rechtsformen}}, number = {{10}}, pages = {{1046--1053}}, publisher = {{Lange Verlag GmbH & Co.KG}}, title = {{{Unternehmensumwandlungen}}}, year = {{2022}}, } @proceedings{9440, editor = {{Noosten, Dirk}}, isbn = {{978-3-9816586-4-4}}, issn = {{2510-7321}}, location = {{Detmold}}, pages = {{80}}, publisher = {{Noosten-Verlag}}, title = {{{Bewertung von Immobilien. 25. Symposium für Immobilienbewertung : Tagungsband}}}, year = {{2022}}, } @inbook{9463, author = {{Ajib, Salman}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{11--13}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Natur, Landschaft und Menschheit - eine Gedankenreise in Bildern aus dem Vorderen Orient}}}, year = {{2022}}, } @inbook{9464, author = {{Aland, Ute}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{14--15}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Ich bin ein Gott auf Erden}}}, year = {{2022}}, } @inbook{9465, author = {{Althaus, Christoph}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{19--21}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Natur und Landschaft als Zuflucht, Heimat und Auftrag}}}, year = {{2022}}, } @inbook{9466, author = {{Asche, Norbert}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{22--25}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Überlegungen zu Natur, Landschaft und Ökologie}}}, year = {{2022}}, } @inbook{9467, author = {{Beinlich, Burkhard}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{26--28}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Natur und Landschaft aus dem Blickwinkel eines Evolutions-Biologen und Naturschützers}}}, year = {{2022}}, } @inbook{9468, author = {{Berens, Stefan}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{29--31}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Tempus fugit - Die Zeit schreitet voran! - Alles wird gut??}}}, year = {{2022}}, } @inbook{9469, author = {{Bochnig, Stefan}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{35--28}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Natur, Landschaft und städtischer Freiraum - Bruchstücke eines lebenslangen Disjurses}}}, year = {{2022}}, } @inbook{9470, author = {{Fettig, Joachim}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{44--46}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Natur und Landschaft in Mittelnorwegen}}}, year = {{2022}}, } @inbook{9471, author = {{Gabriel, Maria Alejandra and Rubart, Jessica}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{47--49}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Natur, Landschaft und Umwelt in einer digitalisierten Welt}}}, year = {{2022}}, } @inbook{9472, author = {{von Holten, Malte}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{61--64}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Was ist und was bedeutet mir Natur?}}}, year = {{2022}}, } @inbook{9473, author = {{Huxmann, Nora Johanna}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{68--70}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Mein Herz schlägt für ... die Pflanzenverwendung. Und Natur. Landschaft auch.}}}, year = {{2022}}, } @inbook{9474, author = {{Kaußen, Lucas}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{71--72}}, publisher = {{SubstainableCampus Höxter}}, title = {{{Natur und Landschaft sind unsere täglichen Begleiter!}}}, year = {{2022}}, } @inbook{9475, author = {{Knepper-Bartel, Yvonne-Christin}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{73--75}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Naturschutz und Zufriedenheit}}}, year = {{2022}}, } @inbook{9476, author = {{Krahl, Jürgen}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{76--80}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Antworten auf drei Fragen von Professor Riedl}}}, year = {{2022}}, } @inbook{9477, author = {{Lohr, Mathias}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{81--84}}, publisher = {{SubstainableCampus Höxter}}, title = {{{Von der Sehnsucht nach Landschaften, Pflanzen und Tieren}}}, year = {{2022}}, } @inbook{9478, author = {{Maas, Klaus}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{85--87}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Eine Sicht auf Natur und Landschaft (und Meer)}}}, year = {{2022}}, } @inbook{9479, author = {{Maßmeyer, Klaus}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{91--93}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{"Dem Anwenden muss das Erkennen vorausgehen" (Max Planck)}}}, year = {{2022}}, } @inbook{9480, author = {{Oldenburg, Martin}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{94--96}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Vom Pott nach Polier}}}, year = {{2022}}, } @inbook{9481, author = {{Rathke, Klaas}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{97--98}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Die Kraft des Wassers}}}, year = {{2022}}, } @inbook{9482, author = {{Riedl, Ulrich}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{99--102}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Verbundenheit im "Alter Ego" - Verantwortung für mein zweites Selbst}}}, year = {{2022}}, } @inbook{9483, author = {{Rohler, Hans-Peter}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{106--108}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{[Was ist und was bedeutet mir Natur]}}}, year = {{2022}}, } @inbook{9484, author = {{Sommerhäuser, Mario}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{112--115}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Meine Natur und Landschaft - am Niederrhein}}}, year = {{2022}}, } @inbook{9485, author = {{Stemmer, Boris}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{120--122}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Landschaft und Natur}}}, year = {{2022}}, } @inbook{9486, author = {{Timmer, Mirco}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{123--125}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Gedanken zu den drei Fragen:}}}, year = {{2022}}, } @inbook{9487, author = {{Türk, Winfried}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{126--129}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Bruchschollenland zwischen Rhön und Thüringer Wald}}}, year = {{2022}}, } @inbook{9488, author = {{Winking, Lars}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{136--138}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Was ist und was bedeutet mir Natur?}}}, year = {{2022}}, } @inbook{9489, author = {{Wolf, Stefan}}, booktitle = {{Natur und Landschaft sind... ja was? Und überhaupt: wozu?}}, editor = {{Riedl, Ulrich}}, pages = {{142--144}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe. Sustainable Campus Höxter}}, title = {{{Gedanken-Bild}}}, year = {{2022}}, } @misc{9507, author = {{Stasch, Jessica}}, pages = {{75}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Konzeption, Gestaltung und Realisation eines Buches zum Thema Ayurveda}}}, year = {{2022}}, } @misc{9568, abstract = {{Pellet production is a multi-step manufacturing process comprising granulation, extrusion and spheronisation. The first step represents a critical control point, since the quality of the granule mass highly influences subsequent process steps and, consequently, the quality of final pellets. The most important parameter of wet granulation is the liquid requirement, which can often only be quantitatively evaluated after further process steps. To identify an alternative for optimal liquid requirements, experiments were conducted with a formulation based on lactose and microcrystalline cellulose. Granules were analyzed with a Powder Vertical Shear Rig. We identified the compression density (ρpress) as the said alternative, linking information from the powder material and the moisture content (R2 = 0.995). We used ρpress to successfully predict liquid requirements for unknown formulation compositions. By means of this prediction, pellets with high quality, regarding shape and size distribution, were produced by carrying out a multi-step manufacturing process. Furthermore, the applicability of ρpress as an alternative quality parameter to other placebo formulations and to formulations containing active pharmaceutical ingredients (APIs) was demonstrated.}}, author = {{Ramm, Selina and Fulek, Ruwen and Eberle, Veronika Anna and Kiera, Christian and Odefey, Ulrich and Pein-Hackelbusch, Miriam}}, booktitle = {{Pharmaceutics}}, issn = {{1999-4923}}, keywords = {{wet granulation, liquid requirement, granulation endpoint, compression density}}, number = {{11}}, publisher = {{MDPI}}, title = {{{Compression Density as an Alternative to Identify an Optimal Moisture Content for High Shear Wet Granulation as an Initial Step for Spheronisation.}}}, doi = {{https://doi.org/10.3390/pharmaceutics14112303}}, volume = {{14}}, year = {{2022}}, } @misc{9660, author = {{Brand, Henry}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Kohärenz in experimentellen Werken}}}, year = {{2022}}, } @inproceedings{9666, abstract = {{In mechanical engineering, individual functional units of a machine are often assembled by one operator at single workstations or at one-piece flow lines. Based on the order information, the required parts are taken from flow racks and assembled step by step to build a functional unit. The existing assembly concepts have two decisive disadvantages in operational practice. First, a large number of components to be provided leads to long walking distances at the work station or line. Second, as the complexity of the assembly task increases, the informational portion of the work increases, so that paper-based information provision can lead to unnecessary assembly errors and additional times. For these reasons, a compacted assembly system has been developed in which, firstly, material is supplied via driven carousels and, secondly, the necessary information is provided to the operator via a cognitive assistance system. The article shows that this concept can reduce walking distances while avoiding assembly errors and additional times.}}, author = {{Hinrichsen, Sven and Nikolenko, Alexander and Beckmann, Nils and Meyer, Frederic}}, booktitle = {{IEEM2022 : IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : Kuala Lumpur, Malaysia, 07-10 December 2022 }}, isbn = {{978-1-6654-8688-0}}, keywords = {{assembly system, assistance system, complexity}}, location = {{Kuala Lumpur}}, publisher = {{IEEE}}, title = {{{Development of a New Type of Carousel-based Compacted Work System for Mixed-model Assembly in Mechanical Engineering}}}, doi = {{10.1109/ieem55944.2022.9989731}}, year = {{2022}}, } @inbook{9668, abstract = {{Das in dem Beitrag dargestellte Projekt beschreibt die Reorganisation eines Produktionsbereichs bei dem Unternehmen Phoenix Contact, bei der Mensch, Organisation und Technik gleichermaßen berücksichtigt wurden. In dem Kapitel wird dabei ein Vorgehen erläutert, wie veränderte Anforderungen an Qualifikationen, die durch neue Technologien und Organisationsformen verursacht wurden, effizient ermittelt und umgesetzt werden können.}}, author = {{Kleineberg, Tim and Hinrichsen, Sven and Lütkemeier, Klaus}}, booktitle = {{Gestaltung digitalisierter Arbeitswelten}}, editor = {{Dumitrescu, Roman}}, isbn = {{9783662580134}}, issn = {{2523-3637}}, pages = {{49--62}}, publisher = {{Springer}}, title = {{{Zukunftswerkstatt COMBICON – PHOENIX CONTACT}}}, doi = {{10.1007/978-3-662-58014-1_4}}, year = {{2022}}, } @inbook{9669, abstract = {{Für eine erfolgreiche Einführung von Assistenzsystemen in der Produktion bedarf es eines nutzerzentrierten Einführungsprozesses. Der erarbeitete Einführungs- und Gestaltungsprozess ist einerseits auf Basis einer Auswertung von Literatur und andererseits über Interviews zum durchgeführten Projekt und einer Reihe von Workshops entstanden. Damit wird die Lücke eines fehlenden Einführungsprozesses geschlossen. Zusätzlicher Nutzen besteht in der ganzheitlichen Betrachtung des Einführungsprozesses. Mensch, Organisation und Technik werden gleichermaßen im Soll-Prozess berücksichtigt. Der Prozess ermöglicht ferner die Entwicklung einer aktiven partnerschaftlichen Zusammenarbeit zwischen Anwendern, Führungskräften und Betriebsräten in solchen Projekten.}}, author = {{Kleineberg, Tim and Hinrichsen, Sven and Busch, Felix}}, booktitle = {{Gestaltung digitalisierter Arbeitswelten}}, editor = {{Dumitrescu, Roman}}, isbn = {{9783662580134}}, issn = {{2523-3637}}, pages = {{63--77}}, publisher = {{Springer}}, title = {{{Entwicklung eines Leitfadens für die Einführung von Werkerassistenzsystemen :Ganzheitliche Einführung von Assistenzsystemen in der Montage: Integration von Technikgestaltung, Change Management-Erfolgsfaktoren und Beteiligung der Betriebsparteien}}}, doi = {{10.1007/978-3-662-58014-1_5}}, year = {{2022}}, } @misc{9690, author = {{Beckmann, Julia}}, pages = {{77}}, publisher = {{Technische Hochschule Ostwestfalen Lippe}}, title = {{{Nachhaltigkeit in der deutschen Film- und Fernsehproduktion}}}, year = {{2022}}, } @book{9934, editor = {{Kost, Susanne and Petrow, Constanze A.}}, isbn = {{978-3-658-37517-1}}, location = {{ Geisenheim}}, pages = {{343}}, publisher = {{Springer Fachmedien Wiesbaden}}, title = {{{Kulturelle Vielfalt in Freiraum und Landschaft: Wahrnehmung, Partizipation, Aneignung und Gestaltung }}}, doi = {{https://doi.org/10.1007/978-3-658-37518-8}}, year = {{2022}}, } @misc{9997, abstract = {{[Jörg Felmeden ist als Autor nicht im Dokument erwähnt]}}, author = {{Felmeden, Jörg}}, pages = {{103}}, publisher = {{Hessisches Ministerium für Umwelt, Klimaschutz, landwirtschaft und Verbraucherschutz}}, title = {{{Zukunftsplan Wasser - Wasserwirtschaftlicher Fachplan Hessen}}}, year = {{2022}}, }