@misc{11274,
  editor       = {{Pottgiesser, Uta and Quist, Wido}},
  issn         = {{1380-3204}},
  publisher    = {{University of Technology}},
  title        = {{{Journal / DOCOMOMO, International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement}}},
  doi          = {{10.52200/docomomo.68}},
  volume       = {{68}},
  year         = {{2023}},
}

@misc{11275,
  abstract     = {{After the two 2022-issues of the Docomomo Journal, number 66 on ‘Modern Plastic Heritage’ and number 67 on ‘Multiple Modernisms in Ukraine,’ this issue reveals another chapter of an often and diversely described theme of Modern Movement and a pressing subject worldwide: Housing.}},
  author       = {{Pottgiesser, Uta and Quist, Wido}},
  booktitle    = {{Journal / DOCOMOMO, International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement}},
  issn         = {{1380-3204}},
  keywords     = {{Urban Studies, Architecture}},
  number       = {{68}},
  pages        = {{2--3}},
  publisher    = {{University of Technology}},
  title        = {{{Towards a Housing Preservation Culture}}},
  doi          = {{10.52200/docomomo.68.ed}},
  year         = {{2023}},
}

@misc{11276,
  abstract     = {{The COST-Action (CA 18137) on Middle Class Mass Housing in Europe (MCMH-EU) has established a transnational scientific network to document the productions of middle-class mass housing built in Europe since the 1950s in order to investigate this specific topic and share knowledge. Considering that middle-class mass housing dominates most of our cities, the research translates into the study of the extensive development of cities in Europe after World War II. The breadth of the theme and the differences between the countries make it difficult to construct a systematic and unified criticism of middle-class mass housing, albeit concentrating on the post-war period. The COST-Action has the goal to build a network to gather research representing the pooled knowledge and experiences from the network of multidisciplinary researchers. So, transversally throughout the Working Groups, an inventory of case studies, a collection of articles, and studies on the policies were produced. This paper elaborates on the collected and produced material and data in order to trigger comparisons and reflections on the approaches and methodologies to face the complexity of middle-class mass housing topic. The comparison was built by using different methods intersecting multiple points of view and following specific thematic tracks that seek to deconstruct the complexity of the middle-class mass housing topic into singular aspects. This paper presents the results of data analyses, visualisation techniques and comparative studies to identify massification processes, morphological structures, demographic and policy developments. It shows a combination of several methods to build a cross-sectional and systematic approach to the diverse knowledge envisioned to develop a methodology for future research. This can be especially useful for future developments and insights towards joint or individual European guidelines, laws and policies to improve the dilapidated housing stock, current housing situation and to compete the housing crisis in general.}},
  author       = {{Benbernou, Ahmed and Como, Alessandra and Harea, Olga and Pottgiesser, Uta and Singhal, Kritika and Smeragliuolo Perrotta, Luisa}},
  booktitle    = {{Journal / DOCOMOMO, International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement}},
  issn         = {{1380-3204}},
  keywords     = {{Urban Studies, Architecture, mass housing, neighbourhood}},
  number       = {{68}},
  pages        = {{76--88}},
  publisher    = {{University of Technology}},
  title        = {{{Evaluation & Criticism : Transversal Comparative Approach to Middle-Class Mass Housing }}},
  doi          = {{10.52200/docomomo.68.08}},
  year         = {{2023}},
}

@misc{11277,
  abstract     = {{Reconstruction and recovery of historic cities after destruction due to conflict or natural disasters have gained increasing relevance in the last decades. The investigation of international examples of recovery after war or natural catastrophic events can provide knowledge for improving guidance and strategies for sustainable reconstruction/ intervention in similar cases in the future. This paper aims to identify and analyze the legal, administrative, social, and economic factors that can favor the reconstruction and recovery processes of the historic city and its residential neighborhoods. An extensive review of international examples and literature on guidance has been conducted to provide insight into best practices and potential solutions. As a result, a set of lessons learned that can be used to address post-conflict and post-disaster recovery and reconstruction in similar situations is given.}},
  author       = {{Kousa, Christine and Lubelli, Barbara and Pottgiesser, Uta}},
  booktitle    = {{Heritage and Sustainable Development}},
  issn         = {{2712-0554}},
  keywords     = {{Environmental Engineering, Architecture, Engineering (miscellaneous), Business, Management and Accounting (miscellaneous)}},
  number       = {{2}},
  pages        = {{315--338}},
  publisher    = {{Research and Development Academy}},
  title        = {{{Towards a sustainable approach to reconstruction of residential heritage: Insights from international case studies}}},
  doi          = {{10.37868/hsd.v5i2.254}},
  volume       = {{5}},
  year         = {{2023}},
}

@misc{11278,
  abstract     = {{<jats:sec><jats:title content-type="abstract-subheading">Purpose</jats:title><jats:p>Housing interventions carried out in accordance with current regulations in the Old City of Aleppo, both before and after the Syrian war, are minor in comparison to those carried out without a license and illegally. This suggests current policies are inadequate and needs upgrading.</jats:p></jats:sec><jats:sec><jats:title content-type="abstract-subheading">Design/methodology/approach</jats:title><jats:p>This article critically reviews current Syrian policies and their implementation on residential heritage in the Old City of Aleppo with the aim to identify gaps and propose directions for modifications. Next to a review of the text of official policies and implementation documents, the archive of the Directorate of the Old City has been consulted and license applications, presented in the period 2018–2022, have been examined. Moreover, interviews with decision-makers from academics and practice were conducted.</jats:p></jats:sec><jats:sec><jats:title content-type="abstract-subheading">Findings</jats:title><jats:p>Major limitations of these policies and relative application procedures have been identified: these involve: legal/administrative, economic and social aspects.</jats:p></jats:sec><jats:sec><jats:title content-type="abstract-subheading">Originality/value</jats:title><jats:p>The specific needs have been highlighted and some proposals for improvement made.</jats:p></jats:sec>}},
  author       = {{Kousa, Christine and Lubelli, Barbara and Pottgiesser, Uta}},
  booktitle    = {{Journal of Cultural Heritage Management and Sustainable Development}},
  issn         = {{2044-1266}},
  keywords     = {{Urban Studies, General Business, Management and Accounting, Geography, Planning and Development, Conservation}},
  publisher    = {{Emerald}},
  title        = {{{Historic development of policies and regulations concerning residential heritage in the Old City of Aleppo}}},
  doi          = {{10.1108/jchmsd-05-2022-0072}},
  year         = {{2023}},
}

@misc{11279,
  abstract     = {{O momento simbólico que vivemos, marcado pela recente pandemia do COVID19 e as evidentes alterações climáticas, criaram um cenário geral que parece estar a criar um productivo período de geração de teorias e práticas 
que repensam como a investigação em arquitectura e em planeamento urbano poderá ter mais impacto na vida das pessoas através de mecanismos mais transformativos, evolutivos e precisos.  
Este artigo pretende enquadrar e analisar como o projecto URBiNAT H2020 está, neste momento, a desenvolver corredores saudáveis e a integrar a dimensão da saúde a partir da definição da Organização Mundial de Saúde, explorando conceitos como saúde física, mental e social e procurando promover o bem-estar através da relação da comunidade com espaço público. 
A partir da identificação e análise das várias estratégias e ferramentas usadas nas diferentes fases do processo de co-criação do projecto (co-diagnóstico, co-projecto, co-implementação e co-monitorização) pretende-se refletir sobre o processo participativo desenvolvido e as soluções baseadas da natureza já implementadas e avaliar o seu impacto nos sistemas ecológicos e sociais estabelecidos.
Desta forma, o texto pretende perguntar como se poderão criar lugares mais saudáveis nas nossas cidades, medir o impacto da saúde e do bem-estar da abordagem inclusiva de regeneração urbana e apresentar sete lições ou conclusões que poderão apoiar futuros projectos, planos ou iniciativas.}},
  author       = {{Moniz, Gonçalo Canto  and Leite, Vitório  and Cardinali, Marcel}},
  booktitle    = {{Livro de atas do V Seminário Internacional de História de Arquitetura Hospitalar: Património Hospitalar e Paisagens de Cura}},
  editor       = {{Brasileiro, Carolina and Arnaut, Daniela and Nunes, José Carlos Avelãs and Ferreira, Patrícia and Providência, Paulo}},
  isbn         = {{978-989-8847-62-1}},
  location     = {{Coimbra}},
  pages        = {{397----411}},
  publisher    = {{Centro de Estudos Sociais}},
  title        = {{{Regeneração urbana inclusiva para cidades saudáveis}}},
  year         = {{2023}},
}

@misc{11284,
  abstract     = {{Introduction: Non-communicable diseases are the global disease burden of our time, with physical inactivity identified as one major risk factor. Green spaces are associated with increased physical activity of nearby residents. But there are still gaps in understanding which proximity and what characteristics of green spaces can trigger physical activity. This study aims to unveil these differences with a rigorous sensitivity analysis. Methods: We gathered data on self-reported health and physical activity from 1365 participants in selected neighbourhoods in Porto, Nantes, Sofia, and Hoje-Taastrup. Spatial data were retrieved from OpenStreetMap. We followed the PRIGSHARE guidelines to control for bias. Around the residential addresses, we generated seven different green space indicators for 15 distances (100-1500 m) using the AID-PRIGSHARE tool. We then analysed each of these 105 green space indicators together with physical activity and health in 105 adjusted structural equation models. Results: Green space accessibility and green space uses indicators showed a pattern of significant positive associations to physical activity and indirect to health at distances of 1100 m or less, with a peak at 600 m for most indicators. Greenness in close proximity (100 m) had significant positive effects on physical activity and indirect effects on health. Surrounding greenness showed positive direct effects on health at 500-1100 m and so do green corridors in 800 m network distance. In contrast, a high quantity of green space uses, and surrounding greenness measured in a larger radius (1100-1500 m) showed a negative relationship with physical activity and indirect health effects. Conclusions: Our results provide insight into how green space characteristics can influence health at different scales, with important implications for urban planners on how to integrate accessible green spaces into urban structures and public health decision-makers on the ability of green spaces to combat physical inactivity.}},
  author       = {{Cardinali, Marcel and Beenackers, Mariëlle A. and van Timmeren, Arjan and Pottgiesser, Uta}},
  booktitle    = {{Environmental research : a multidisziplinary journal of environmental sciences, ecology, and public health }},
  issn         = {{1096-0953}},
  keywords     = {{Greenspace, Mediator, Behaviour, Sedentary lifestyle, Public health}},
  publisher    = {{Elsevier BV}},
  title        = {{{The relation between proximity to and characteristics of green spaces to physical activity and health: A multi-dimensional sensitivity analysis in four European cities}}},
  doi          = {{10.1016/j.envres.2023.117605}},
  volume       = {{241}},
  year         = {{2023}},
}

@inbook{11288,
  abstract     = {{Soziale Medien sind ein moderner, stetiger Begleiter im Alltag. Nutzergenerierte Inhalte und Datensätze, die über diese Medien frei zugängig verbreitet werden, können in vielen Disziplinen einen Mehrwert schaffen. In der landschaftsplanerischen Praxis ist die Nutzung von nutzergenerierten Daten aus sozialen Medien sehr selten. Dieser Beitrag zeigt am Beispiel einer Untersuchung im Kreis Lippe einen Ansatz auf, in dem Daten aus sozialen Medien für die Ortung von Points of Interest (POI) einbezogen und somit intersubjektive Aussagen über die Wahrnehmung der Landschaft in Bezug auf einen bestimmten Raum generiert werden können. Dazu werden mithilfe eines Social-Media-Harvesting-Tools aus dem sozialen Medium FlickR Fotografien und zugehörige geographische Informationen (Fotografie-Standorte) und weitere Hintergrunddaten gewonnen. Der Beitrag fokussiert sich dabei auf die Analyse der geographischen Informationen der Fotografien.}},
  author       = {{Kaußen, Lucas and Bernstein, Franziska}},
  booktitle    = {{Landschaft und Tourismus}},
  editor       = {{Kühne, Olaf and Timo, Sedelmeier and Corinna, Jenal and Freytag, Tim}},
  isbn         = {{978-3-658-39084-6}},
  issn         = {{2625-7009}},
  keywords     = {{Points of Interest, POI, Soziale Medien, Social-Media-Harvesting, Konstruktion von Landschaft}},
  pages        = {{237–251}},
  publisher    = {{Springer Fachmedien Wiesbaden}},
  title        = {{{Die virtuelle Konstruktion von Landschaft – Points of Interest im Kreis Lippe}}},
  doi          = {{10.1007/978-3-658-39085-3_13}},
  year         = {{2023}},
}

@inbook{11289,
  abstract     = {{Im Rahmen des E&E-Vorhabens „Grüne Infrastruktur in ländlichen Regionen“ wurde ein neopragmatischer Ansatz gewählt, um die Naherholung im Kreis Lippe zu analysieren. Der neopragmatische Ansatz bietet in diesem Beispiel die Möglichkeit, die planungspraktische Aufgabe der Analyse der Erholung im Kontext der Etablierung einer grünen Infrastruktur zu lösen und gleichzeitig explorative Methoden zu erproben und wissenschaftlich sowie landschaftstheoretisch zu reflektieren (Kühne in Handbuch Landschaft (RaumFragen: Stadt – Region – Landschaft). Springer VS, Wiesbaden, S. 153–162, 2019a; Kühne in Zwischen Macht und Essenz, Konstrukt und Objekt. Wie Landschaftstheorien Deutungskonkurrenzen von Natur zeigen. Stadt und Grün. S. 24–27, 2019b). Für die Analyse der Naherholung wird in dem Vorhaben eine GIS-basierte Methode entwickelt, die im Wesentlichen mit dem in der Planung vorherrschenden positivistischen Modell kompatible Ergebnisse erbringt, aber auch die Landschaftskonstruktionen der Erholungssuchenden für die Planung nutzbar macht.}},
  author       = {{Stemmer, Boris and Bernstein, Franziska and Behre, Evelyn and Kaußen, Lucas}},
  booktitle    = {{ Landschaft und Tourismus}},
  editor       = {{Kühne, Olaf and Sedelmeier, Timo and Jenal, Corinna and Freytag, Tim}},
  isbn         = {{978-3-658-39084-6}},
  issn         = {{2625-7009}},
  keywords     = {{Naherholung, Grüne Infrastruktur, Erholungspotential, Erholungsnachfrage, GIS-basierte Methode, Kreis Lippe}},
  pages        = {{253–275}},
  publisher    = {{Springer Fachmedien Wiesbaden}},
  title        = {{{Naherholung als Teil der grünen Infrastruktur – ein neopragmatischer Ansatz}}},
  doi          = {{10.1007/978-3-658-39085-3_14}},
  year         = {{2023}},
}

@misc{11305,
  abstract     = {{Currently, numerous single-track railway lines are disused due to economic reasons. However, one way they could be reactivated for a bidirectional on-demand service traffic is by small vehicles that use only one rail. MONOCABs are such small cabin-like vehicles, stabilized by a system of control moment gyroscopes and a trim mass. They could make an important contribution to improve the mobility offer especially in rural areas. Regarding the MONOCAB, there is currently no reference in comparison with other vehicles. It is mandatory to gain experience before transferring such a new vehicle concept into commercial operation. To ensure the function and safety of the vehicle even before implementation, a model-based design of the system is carried out for development and analysis. In order to test the developed algorithms, this paper presents a Hardware-in-the-loop structure considering a detailed model of the vehicle and real electronic control units to accurately represent the overall system. This paper focuses on the driving system of the vehicle and investigates interdependencies with the performance of the electronic control units and communication networks.}},
  author       = {{Hanselle, Raphael and Griese, Martin and Rasche, Rainer and Schulte, Thomas}},
  booktitle    = {{2023 IEEE 21st International Conference on Industrial Informatics (INDIN)}},
  editor       = {{Jasperneite, Jürgen and Wisniewski, Lukasz and Man, Kim Fung}},
  isbn         = {{978-1-6654-9314-7}},
  location     = {{Lemgo}},
  publisher    = {{IEEE}},
  title        = {{{HIL Simulation of the Positioning Control for an Automated Driving Monorail Vehicle}}},
  doi          = {{10.1109/indin51400.2023.10218259}},
  year         = {{2023}},
}

@misc{11306,
  abstract     = {{Currently, numerous single-track railway lines are disused due to economic reasons. However, one way they could be reactivated for a bidirectional on-demand service traffic by small vehicles that use only one rail. MONOCABs are such small cabin-like vehicles, stabilized by a system of control moment gyroscopes and a trim mass. They could make an important contribution to improve the mobility offer especially in rural areas. Regarding the MONOCAB, there is currently no reference in comparison with other vehicles. It is mandatory to gain experience before transferring such a new vehicle concept into commercial operation. Especially the safe and robust commissioning of the stabilization control system is crucial and therefore requires an elaborated procedure. At this step, parameters related to the vertical dynamics have to be determined beforehand. This paper presents a comparative investigation of methods to estimate the moment of inertia and gravitational torque constant. Multiple methods in time-domain and frequency-domain are experimentally evaluated and compared with each other. Experimental tests are carried out with a full-scale monorail vehicle.}},
  author       = {{Griese, Martin and Mousavi, Seyed Davood and Schulte, Thomas}},
  booktitle    = {{2023 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM)}},
  isbn         = {{978-1-6654-7634-8}},
  issn         = {{2159-6255}},
  keywords     = {{Parameter identification, Vehicle dynamics, Control moment gyroscope, Roll stabilization, Monorail vehicles}},
  location     = {{Seattle, Wash.}},
  pages        = {{1196--1201}},
  publisher    = {{IEEE}},
  title        = {{{Parameter identification related to vertical dynamic of a self-stabilizing monorail vehicle}}},
  doi          = {{10.1109/aim46323.2023.10196189}},
  year         = {{2023}},
}

@misc{10108,
  author       = {{Mette, Frederic}},
  pages        = {{66}},
  publisher    = {{Technische Hochschule OWL}},
  title        = {{{Dokumentarfotografie in Farbe am Beispiel Steve McCurry}}},
  year         = {{2023}},
}

@misc{10113,
  abstract     = {{The popularity of fully glazed facades in office building design has been well-established over the years. One of the techniques used to achieve a seamless outer appearance is the shadow box system, which is composed of two layers of glazing with an air cavity in between. It has gained widespread popularity in markets worldwide due to its potential for creative design and flexibility. However, it is prone to issues such as condensation, contamination, and overheating. This research utilized a mockup test approach to study the issue of overheating in shadow box systems and analyze the main causes of this problem. The findings have significant implications for the design of shadow box systems. The results of the mockup test indicate sun altitude in relation to the geolocation and facade orientation plays a major role in overheating the shadow box. Additionally, careful consideration should be given to the design of ventilation openings to mitigate the overheating issue. This ongoing analysis aims to develop strategies to mitigate the issues found in shadow box systems and future research will involve a comprehensive analysis of various types of shadow box systems.}},
  author       = {{Singh, Godo Zabur and Arztmann, Daniel and Balderrama, Alvaro}},
  booktitle    = {{International Scientific Conference on Contemporary Glass Façades}},
  location     = {{Zagreb}},
  publisher    = {{University of Zagreb}},
  title        = {{{Investigating Heat Development in Shadow Box Façade Systems: A Mockup Test Approach}}},
  year         = {{2023}},
}

@book{10121,
  author       = {{Thies, Katharina and Schneider, Birgit and Breternitz, Annika and Steltenkamp, Ralf and Meyer, Kirsten}},
  isbn         = {{978-3-910240-00-1}},
  pages        = {{35}},
  publisher    = {{Bildungsbrücken OWL}},
  title        = {{{Bridge Days - Ein innovatives Design-Sprint-Format für Auszubildende : Manual für die Durchführung}}},
  doi          = {{https://doi.org/10.25644/q0ps-3m33}},
  year         = {{2023}},
}

@misc{10130,
  abstract     = {{In dieser Arbeit wurde untersucht, wie sich die Verwendung eines Nanogold-Kieselgel-Katalysators auf den Verlauf einer enzymatischen Gärreaktion auswirkt. Diese Untersuchungen basieren auf einer vorherigen Arbeit, in der nur der Beginn der Gärung betrachtet wurde [1]. Bei einer enzymatischen Gärung, wird aus Glucose, unter Verwendung von Adenosindiphosphat Ethanol, Kohlenstoffdioxid und das energiereichere Adenosintriphosphat gebildet (Formel 1) [2]. Als Versuchsmedium wurde der Fruchtsaft Apfelsaft gewählt. Bei den Untersuchungen wurde insbesondere auf die Fortsetzung der Reaktion nach Bildung der ersten Gasblase geachtet, da die Frage, ob es sich hierbei um ein einmaliges Ereignis handelt aufgekommen ist. Um dies zu untersuchen, wurden Versuche mit drei Messreihen durchgeführt. Diese werden im Folgenden als Messreihen „Hefe“, „Hefe und Katalysator“ und „Katalysator“ bezeichnet. Die einzelnen Versuche decken unterschiedliche Versuchszeiträume und ab.}},
  author       = {{Fahrenkrug, Katrin}},
  publisher    = {{Technischen Hochschule Ostwestfahlen-Lippe}},
  title        = {{{Untersuchung zur katalytischen Beschleunigung bei der Ethanolbildung in natürlichen Fruchtsäften : Präsentation der Bachelorarbeit von Katrin Fahrenkrug unter Betreuung von Herrn Prof. Dr. Manfred Sietz}}},
  year         = {{2023}},
}

@misc{10145,
  author       = {{Lange, Christin}},
  pages        = {{60}},
  publisher    = {{Technische Hochschule OWL}},
  title        = {{{OneWeekDrunk}}},
  year         = {{2023}},
}

@misc{10176,
  author       = {{Schmelter, Andreas and Leinhos, Dirk and Flatt, Holger and Ziehn, Jens and Schmelter, Andreas and Brand, Jan-Christopher and Ponholzer, Franz and von der Haar, Henrik and Beyer, Micha and Witte, Stefan}},
  issn         = {{2629-7973 }},
  pages        = {{292}},
  publisher    = {{DZSF}},
  title        = {{{Sensorik als technische Voraussetzung für ATO-Funktionen}}},
  volume       = {{31}},
  year         = {{2023}},
}

@misc{10201,
  author       = {{Hernández Rodriguez, Tanja and Ramm, Selina and Lange-Hegermann, Markus and Frahm, Björn}},
  location     = {{Recklinghausen, Germany}},
  title        = {{{A systematic, model-based workflow for risk-based decision making in upstream development}}},
  year         = {{2023}},
}

@misc{10210,
  author       = {{Kunstein, Melissa}},
  pages        = {{99}},
  publisher    = {{Technische Hochschule OWL }},
  title        = {{{Das Social Media Dispositiv - Nutzung und Wahrnehmung im Alltag der Gen Z}}},
  year         = {{2023}},
}

@misc{10216,
  abstract     = {{Wet granulation is a frequent process in the pharmaceutical industry. As a starting point for numerous dosage forms, the quality of the granulation not only affects subsequent production steps but also impacts the quality of the final product. It is thus crucial and economical to monitor this operation thoroughly. Here, we report on identifying different phases of a granulation process using a machine learning approach. The phases reflect the water content which, in turn, influences the processability and quality of the granule mass. We used two kinds of microphones and an acceleration sensor to capture acoustic emissions and vibrations. We trained convolutional neural networks (CNNs) to classify the different phases using transformed sound recordings as the input. We achieved a classification accuracy of up to 90% using vibrational data and an accuracy of up to 97% using the audible microphone data. Our results indicate the suitability of using audible sound and machine learning to monitor pharmaceutical processes. Moreover, since recording acoustic emissions is contactless, it readily complies with legal regulations and presents Good Manufacturing Practices.}},
  author       = {{Fulek, Ruwen and Ramm, Selina and Kiera, Christian and Pein-Hackelbusch, Miriam and Odefey, Ulrich}},
  booktitle    = {{Pharmaceutics}},
  issn         = {{1999-4923 }},
  keywords     = {{wet granulation, acoustic classification, machine learning, convolutional neural networks}},
  number       = {{8}},
  publisher    = {{MDPI}},
  title        = {{{A machine learning approach to qualitatively evaluate different granulation phases by acoustic emissions}}},
  doi          = {{https://doi.org/10.3390/pharmaceutics15082153}},
  volume       = {{15}},
  year         = {{2023}},
}

@book{10217,
  author       = {{Flegel, Georg and Birnstiel, Karl  and Nerreter, Wolfgang and Borcherding, Holger and Meier, Uwe}},
  isbn         = {{978-3-446-47275-4}},
  publisher    = {{Hanser}},
  title        = {{{Elektrotechnik für Maschinenbau und Mechatronik}}},
  doi          = {{http://doi.org/10.3139/9783446479319}},
  year         = {{2023}},
}

@misc{10221,
  author       = {{Köhler, Vanessa}},
  pages        = {{73}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Die Figurenentwicklung in Filmserien - analysiert anhand des Serienkonzepts "Squeeze Me Rich"}}},
  year         = {{2023}},
}

@misc{10231,
  abstract     = {{Das Schreiben in einem Journal hegt das Ziel, individuelle Erfahrungen, Ereignisse und Gefühlslagen zu bewältigen. Diese Arbeit vermittelt erlesene Erkenntnisse und aufschlussreiche Perspektiven für den Umgang mit der persönlichen Selbstentwicklung durch das Medium des Schreibens. Anhand einer fundierten Theorie und einer praktischen Umsetzung wird aufgezeigt, wie das Schreiben als kraftvolle Methode zur Erleichterung und Selbsterkenntnis genutzt werden kann.
Das Herzstück dieser Arbeit liegt in einem umfassenden Wegweiser, der die kreative und heilsame Kraft des Schreibens entdeckt. Das analoge Schreiben wird als mächtiges Instrument der Selbstreflexion, Selbstentdeckung und persönlichen Transformation betrachtet. Durch das Festhalten von Gedanken, Emotionen und Erlebnissen in einem physischen Journal eröffnet sich ein Raum der Selbstexploration und -entwicklung.}},
  author       = {{Lenart, Maria-Therese}},
  pages        = {{115}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Mut zum Alleinsein und Glücklichsein mittels Journaling : Eine Reise zu Dir selbst.}}},
  year         = {{2023}},
}

@misc{10240,
  author       = {{Stawinoga, Martin}},
  booktitle    = {{DB: Der Betrieb}},
  issn         = {{0005-9935}},
  number       = {{35}},
  pages        = {{2001--2008}},
  publisher    = {{Fachmedien Otto Schmidt}},
  title        = {{{International Standard on Sustainability Assurance (ISSA) 5000 – Eine kritische Würdigung des Konsultationsentwurfs}}},
  year         = {{2023}},
}

@misc{10243,
  author       = {{Metz, Anna-Christin}},
  pages        = {{94}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Neuromarketing Manipulation des Unterbewusstsein am Beispiel eines Verpackungsdesigns }}},
  year         = {{2023}},
}

@misc{10245,
  author       = {{Wefing, Patrick and Schneider, Jan}},
  booktitle    = {{Brauwelt international : journal for the brewing and beverage industry }},
  issn         = {{0934-9340}},
  pages        = {{224--227}},
  publisher    = {{Hans Carl Verlag}},
  title        = {{{FAN measurement during mashing}}},
  volume       = {{IV}},
  year         = {{2023}},
}

@misc{10247,
  author       = {{Klerkx, Jelle}},
  keywords     = {{Streetfotografie, Streetphotography}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Von der Schwierigkeit des authentischen Bildes - Methoden und Praxis der Streetfotografie}}},
  year         = {{2023}},
}

@misc{10250,
  author       = {{Stawinoga, Martin}},
  booktitle    = {{Betriebswirtschaftliche Forschung und Praxis : BFuP}},
  issn         = {{0340-5370}},
  pages        = {{442}},
  title        = {{{Nachhaltigkeitsberichterstattung im Mittelstand – Hintergründe und Umsetzung europäischer Vorgaben, von: Hartke, V./Wilhelm, B., IDW Verlag, Düsseldorf 2022}}},
  year         = {{2023}},
}

@misc{10252,
  author       = {{Nacke, Liz}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{Wird das Kundenerlebnis durch fotorealistische Architekturvisualisierungen optimiert?}}},
  year         = {{2023}},
}

@misc{10255,
  abstract     = {{Die vorliegende Arbeit untersucht die zentrale Frage, inwiefern Medienkonsumriende ihre Selbstbestimmung in einer von Deepfake Pornografie beeinträchtigten 
Medienlandschaft wahren können. 
Der theoretische Teil der Arbeit setzt sich mit den Hintergründen, der aktuellen Lage 
und den Auswirkungen von Deepfake Pornografie auseinander. Die Antworten der 
durchgeführten Umfrage werden mit den Ergebnissen der Literaturrecherche verglichen. Anschließend werden Maßnahmen für Medienkonsumierende erarbeitet, die 
zur Wahrung der Selbstbestimmung beitragen können.
Im praktischen Teil der Arbeit wird die Erstellung einer Reihe an Filmplakaten dokumentiert, die sich an der Gestaltung von Postern des Porno Chics der 1970er Jahre 
orientieren. Die zentralen Fokuspunkte dieser Plakate bilden berühmte Menschenrechtler*innen, denen die Gesichter bekannter Pornodarstellerinnen aufgesetzt sind. 
Das Projekt dient dazu, der einfachen Erstellung von generierten Bildern, im Kontext 
pornografischer Inhalte Aufmerksamkeit zu schenken.}},
  author       = {{Schneider, Pia}},
  keywords     = {{Deepfake, digitale Medien, Filmplakate, Porno Chic, Pornografie, Selbstbestimmung}},
  pages        = {{132}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Ein Blick auf die Bedeutung  der Selbstbestimmung im  Medienwandel in Hinsicht auf Deepfake Pornografie}}},
  year         = {{2023}},
}

@misc{10261,
  author       = {{Reimer, Antonia}},
  pages        = {{112}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Konzeption und Umsetzung eines Corporate Designs und Webauftritts für einen Fotografen }}},
  year         = {{2023}},
}

@misc{10265,
  abstract     = {{In dieser Arbeit werden die effizientesten Finanzierungsmöglichkeiten für studentische Kurzfilme in der Bundesrepublik Deutschland, anhand eine qualitativen Interviewreihe, mit Filmstudent*innen und Produzent*innen, aufgearbeitet und vorgestellt. }},
  author       = {{Biegert, Lennart}},
  keywords     = {{Filmproduktion, Film, Produktion, Experteninterviews, Qualitative Inhaltsanalyse, Qualitative Interviews}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{Finanzierungsmöglichkeiten studentischer Kurzfilme in der Bundesrepublik Deutschland}}},
  year         = {{2023}},
}

@misc{10267,
  abstract     = {{Im Rahmen dieser Bachelorarbeit werden die cineastisch visuelle Gestaltung und die visuelle 
Narration in der Game-Engine Unreal untersucht. Das zentrale Ziel ist die Entwicklung einer 
eigenen Bildsprache und Bildästhetik durch eine umfassende Analyse von Kriegsdramen 
und der Anwendung von Filmstock Emulation und Compositing-Methoden. In diesem 
Kontext wird ein Anti-Kriegskurzfilm erstellt, der die erworbenen Techniken in die Praxis 
umsetzt und die Möglichkeiten und Limitationen der cineastischen Erzählweise in der 
Unreal Engine aufzeigt. Die Arbeit befasst sich zunächst mit der aktuellen Entwicklung in 
der Filmindustrie, insbesondere in Bezug auf neue Technologien wie künstlicher Intelligenz 
und der fortschreitenden Automatisierung in der Film- und Medienproduktion. Es wird sich 
darauffolgend mit den Herausforderungen von Echtzeitrendering-Engines beschäftigt. 
Anschließend erfolgt eine kurze historische Einordnung des Mediums Film, eine 
differenzierte Betrachtung der Unterschiede zwischen analogem und digitalem Film sowie 
der Funktionsweise von Filmkameras. Ein besonderer Fokus wird in diesem Zusammenhang 
auf die Nachstellung von Kameralinseneffekten und Filmstock Emulation gelegt. 
}},
  author       = {{Letmathe, Thilo}},
  keywords     = {{Unreal Engine, Game Engine, Echtzeitrendering, Prozedural, Automatisierung, Künstliche Intelligenz (KI), Virtual Film Production (VFP), Computer-Generated Imagery (CGI), Visual Effect (VFX), Filmstock Emulation, DaVinci Resolve, Compositing, Kameralinseneffekte, analoger Film, visuelles Erzählen, Kinematographie, Filmografie, Bildsprache, Bildgestaltung, Artdirecting, Cineastik, Realismus, Environmental design, Krieg, Film, Kurzfilm, Filmanalyse und Filmhistorie}},
  pages        = {{124}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe }},
  title        = {{{Die Macht des Bewegtbildes}}},
  year         = {{2023}},
}

@misc{10278,
  author       = {{Bock, Joelle}},
  pages        = {{60}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Design und Künstliche Intelligenz. : KI als neues Instrument im Designprozess: Chancen, Fragen und Herausforderungen.}}},
  year         = {{2023}},
}

@misc{10283,
  author       = {{Rethmeier, Lara}},
  pages        = {{50}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Entwicklung eines illustrierten Kinderbuches zur kritischen Auseinandersetzung mit Medien}}},
  year         = {{2023}},
}

@misc{10288,
  author       = {{Nowaczyk, Cindy}},
  pages        = {{46}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Was der Müll im Wald anstellt. Die Erstellung eines Kinderbuches}}},
  year         = {{2023}},
}

@misc{10291,
  author       = {{Eckert, Sandra}},
  pages        = {{62}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Wie Streaming das Doku-Genre verändern könnte}}},
  year         = {{2023}},
}

@misc{10305,
  author       = {{Schmidt, Steffen}},
  pages        = {{78}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Corporate Design für den Kreativ Campus Detmold e.V. Entwicklung einer visuellen Identität}}},
  year         = {{2023}},
}

@misc{10309,
  author       = {{Grimm, Valentin and Rubart, Jessica and Faller, Gudrun and Geiger, Laura}},
  booktitle    = {{Mensch und Computer 2023 – Workshopband, MCI-WS02: Partizipative und sozialverantwortliche Technikentwicklung}},
  editor       = {{Fröhlich, Peter and Cobus, Vanessa}},
  location     = {{Rapperswil, Schweiz}},
  publisher    = {{Gesellschaft für Informatik e.V.}},
  title        = {{{Partizipativer Entwicklungsprozess einer Trainingsplattform für Haushaltshilfen}}},
  doi          = {{10.18420/muc2023-mci-ws02-258}},
  year         = {{2023}},
}

@misc{10311,
  author       = {{Grimm, Valentin and Rubart, Jessica}},
  booktitle    = {{Mensch und Computer 2023 – Workshopband, MCI-WS08 6th International Workshop Gam-R – Gamification Reloaded}},
  editor       = {{Fröhlich, Peter and Cobus, Vanessa}},
  location     = {{Rapperswil, Schweiz}},
  publisher    = {{Gesellschaft für Informatik e.V.}},
  title        = {{{Unlocking E-learning and XAI Concepts with Free Limited Choice}}},
  doi          = {{10.18420/muc2023-mci-ws08-354}},
  year         = {{2023}},
}

@misc{10312,
  author       = {{Potthast, Jonas and Grimm, Valentin and Rubart, Jessica}},
  booktitle    = {{Mensch und Computer 2023 – Workshopband, MCI-WS16 - UCAI 2023: Workshop on User-Centered Artificial Intelligence}},
  editor       = {{Fröhlich, Peter and Cobus, Vanessa}},
  location     = {{Rapperswil, Schweiz}},
  publisher    = {{Gesellschaft für Informatik e.V.}},
  title        = {{{Immersive Exploration of Machine Learning Data Combining Visual Analytics with Explainable AI}}},
  doi          = {{10.18420/muc2023-mci-ws16-389}},
  year         = {{2023}},
}

@misc{10315,
  author       = {{Jaschke, Tim}},
  pages        = {{182}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Die Form als Mittel — wie Rahmen und Typografie eine Botschaft beeinflussen, den Betrachter lenken und unterbewusst manipulieren.}}},
  year         = {{2023}},
}

@misc{10321,
  author       = {{Ulbrich, Kevin}},
  pages        = {{92}},
  publisher    = {{Technischen Hochschule Ostwestfahlen-Lippe}},
  title        = {{{Interactive Virtual Museums : Grundprinzipien von (virtuellen) Museen mit praktischem Beispiel: „Beyond The Frame“}}},
  year         = {{2023}},
}

@misc{10326,
  abstract     = {{In the food industry, and especially in wines as products thereof, ethanol and sulfur dioxide play an equally important role. Both substances are important wine quality characteristics as they influence the taste and odor. As both substances comprise volatile matter, electronic noses should be applicable to discriminate the different qualities of wines. Our study investigates the influence of alcohol and sulfur dioxide on the discrimination ability of wines (especially those of the same grape variety) using two different electronic nose systems. One system is equipped with metal oxide sensors and the other with quartz crystal microbalance sensors. Contrary to indications in literature, where the alcohol content is discussed to have a large influence on e-nose results, it was shown that a difference of 1 % ethanol was not sufficient to allow accurate discrimination using Linear Discriminant Analysis by any system. On the positive side, the analyzed concentrations of ethanol (about 12 %) did not superimpose other volatile information. So difference in sulfur dioxide content gave an accuracy for sample discrimination of up to 90.6 % with MOS nose. Thus, we are so far partially able to discriminate wines with electronic noses based on their volatile imprint.}},
  author       = {{Wörner, Julius and Dörksen, Helene and Pein-Hackelbusch, Miriam}},
  booktitle    = {{2023 IEEE 21st International Conference on Industrial Informatics (INDIN)}},
  keywords     = {{Ethanol, Pipelines, Metals, Nose, Electronic noses, Sensor systems, Sensors, Quartz crystals, Linear discriminant analysis, Sulfur}},
  location     = {{Lemgo}},
  title        = {{{Key Indicators for the Discrimination of Wines by Electronic Noses}}},
  doi          = {{https://doi.org/10.1109/INDIN51400.2023.10217912}},
  year         = {{2023}},
}

@misc{10327,
  abstract     = {{Wound infections are a major problem worldwide, both for the healthcare system and for patients affected. Currently available diagnostic methods to determine the responsible germs are time-consuming and costly. Wound infections are mostly caused by various bacteria, which in turn produce volatile organic compounds. From clinical experience, we know that depending on the bacteria involved, a specific odor impression can be expected. For this reason, we hypothesized that electronic noses, i.e., non-invasive electronic sensors for the detection of volatile organic compounds, are applicable for diagnostic purposes. By providing a comprehensive overview of the state-of-research, we tested our hypothesis. In particular, we addressed three overarching questions: 1) which sensor technologies are suitable for the diagnosis of wound infections and why? 2) how must the (biological) sample be prepared and presented to the measurement system? 3) which machine learning methods and algorithms have already proven successful for the classification of microorganisms? The corresponding articles have critically been reviewed and are discussed particularly in the context of their potential for clinical diagnostics. In summary, it can already be stated today that the use of electronic noses for the detection of bacteria in wound infections is a very interesting, fast and non-invasive method. However, reliable clinical studies are still missing and further research is necessary.}},
  author       = {{Wörner, Julius and Moelleken, Maurice and Dissemond, Joachim and Pein-Hackelbusch, Miriam}},
  booktitle    = {{Frontiers in Sensors}},
  issn         = {{2673-5067}},
  publisher    = {{Frontiers Media}},
  title        = {{{Supporting wound infection diagnosis: advancements and challenges with electronic noses}}},
  doi          = {{https://doi.org/10.3389/fsens.2023.1250756}},
  volume       = {{4}},
  year         = {{2023}},
}

@misc{10332,
  author       = {{Frühwald-König, Katja}},
  location     = {{Oberkochen}},
  title        = {{{Holz = Baustoff der Zukunft! }}},
  year         = {{2023}},
}

@misc{10333,
  abstract     = {{The wood from oil palm trunks exhibits significant variations in distribution of structural tissue, density and elastomechanical properties across and along the trunk. Its reliable, safe, and economic usage for load-bearing purposes, such as glued laminated timber (GLT), requires a precise definition of its elastomechanical properties through appropriate strength grading procedures. Oil palm lumber is strength graded according to its density using an X-ray technique in which 50 % of the lamellas are ripped, graded, edge glued and therefore density homogenized, and 50 % are cut only according to their geometry. Lamellas are tested in tension parallel to the vascular bundles; combined GLT is produced from strength-graded lamellas and tested in bending parallel and compression parallel and perpendicular to the vascular bundles. The characteristic strength values for C10 and C14 according to EN 338 are achieved. A correlation between density and elastomechanical properties is estab-lished. GLT from density-homogenized lamellas achieve higher bending properties than from lamellas with a “natural” density gradient across the width.}},
  author       = {{Frühwald-König, Katja}},
  booktitle    = {{Timber for a livable future : World Conference on Timber Engineering : WCTE 2023 : 19-22 June 2023, Oslo, Norway }},
  editor       = {{Nyrud, Andres Q. and Malo, Kjell Arne  and Nore, Kristine}},
  isbn         = {{9781713873297}},
  keywords     = {{Oil palm lumber, glue laminated timber, GLT, strength grading, elastomechanical properties}},
  location     = {{Oslo, Norway}},
  pages        = {{638--646}},
  publisher    = {{Curran Associates, Inc. }},
  title        = {{{Elastomechanical Properties of Glued Laminated Timber made of Strength Graded Oil Palm Lumber}}},
  doi          = {{https://doi.org/10.52202/069179-0087}},
  year         = {{2023}},
}

@misc{10334,
  author       = {{Frühwald-König, Katja}},
  location     = {{Olsberg}},
  title        = {{{Technische Eigenschaften der Birke und Einsatz im Ingenieurholzbau}}},
  year         = {{2023}},
}

@misc{10335,
  author       = {{Frühwald-König, Katja}},
  title        = {{{Die Holzbauinitiative der Bundesregierung}}},
  year         = {{2023}},
}

@misc{10336,
  author       = {{Frühwald-König, Katja and Wieland, Stefanie}},
  booktitle    = {{ 5. Aachener Holzbautagung 2023}},
  location     = {{Aachen}},
  publisher    = {{Aachen}},
  title        = {{{Wald im Klimawandel - Einsatz von Birke im Holzbau}}},
  year         = {{2023}},
}

@misc{10339,
  author       = {{Broßmann, Marie}},
  pages        = {{72}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Die Auswirkung des Szenenbilds auf Darstellende}}},
  year         = {{2023}},
}

@misc{10347,
  abstract     = {{Im theoretischen Teil dieser Bachelorarbeit wird untersucht, wie Printmedien in ihrer einfachsten Form den Film und die Rezipienten beeinflussen. Es wird analysiert, wie Printmedien entstehen und wie sie als Filmrequisiten eingesetzt werden können. Durch einige Filmbeispiele und eine Analyse der His-torie der Printmedien wurde nicht nur die Wirkung der Objek-te dargelegt, sondern auch die Wichtigkeit in verschiedenen Zusammenhängen erklärt. Die Printrequisite dient als be-stärkendes Objekt des Schauspielenden, sowie als Leitobjekt der Geschichte. 
Zusammenhängen erklärt. Die Printrequisite dient als bestärkendes Objekt des Schauspielenden, sowie als Leitobjekt der Geschichte.}},
  author       = {{Beckmann, Pia}},
  publisher    = {{Technische Hochschule OWL }},
  title        = {{{Die Wirkung von Printmedien als Filmrequisite }}},
  year         = {{2023}},
}

@misc{10378,
  author       = {{Schneidmiller, Jessica}},
  publisher    = {{Technische Hochschule OWL}},
  title        = {{{Konzeption und Umsetzung eines Corporate Designs für ein Cafè mit eigener Rösterei}}},
  year         = {{2023}},
}

@misc{10395,
  author       = {{Bens, Friederike}},
  keywords     = {{Bachelorarbeit, Fotografie, Sportfotografie, Sport, Langzeitbelichtung, Portrait}},
  pages        = {{66}},
  publisher    = {{Technische Hochschule OWL}},
  title        = {{{Konzeptionierung und Umsetzung einer Fotostrecke mit Sportlerportraits}}},
  year         = {{2023}},
}

@misc{10403,
  abstract     = {{Due to the increasingly widespread use of efficient power electronics, DC grids today offer more and more advantages over AC grids. Based on comparative measurements, this paper shows that an efficiency increase through DC can be achieved even with little recuperation potential of an existing system. In addition, other advantages such as peak load reduction by -43 %, power quality improvement and reliability are documented.}},
  author       = {{Warkentin, Slavi and Puls, Simon and Riethmüller, Simon and Blank, Frederic and Borcherding, Holger}},
  booktitle    = {{PCIM Europe 2023 International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management}},
  isbn         = {{978-3-8007-6091-6}},
  location     = {{Nürnberg}},
  pages        = {{PP167}},
  publisher    = {{VDE Verlag}},
  title        = {{{Measured Advantages of a Production Plant with DC Grid in terms of Energy Efficiency, Peak Power Reduction and Power Quality}}},
  doi          = {{10.30420/566091273}},
  year         = {{2023}},
}

@misc{10405,
  abstract     = {{Due to the increasingly widespread use of efficient power electronics, DC grids today offer more and more advantages over AC grids. In the field of energy supply, the use of DC technology is also growing and is state of the art in offshore, high-voltage, vehicle and data center applications. The spread of industrial open DC grids is currently starting and is completely different due to the requirements. The DC links of each device are connected directly and the capacitors of individual devices shall not be overloaded. Especially not by ripple currents from other devices. The paper describes the easy use of a measuring box which evaluates and optically displays the load of electrolytic capacitors. No further measuring equipment is required. The simple, temporary integration into a grid makes it easy to check whether capacitors of individual devices are overloaded, and their lifetime is limited.}},
  author       = {{Koch, Jan-Niklas and Puls, Simon and Borcherding, Holger and Warkentin, Slavi}},
  booktitle    = {{ größer  Mesago Messe Frankfurt GmbH, Stuttgart (Hrsg.) PCIM Europe 2023 International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management}},
  location     = {{Nürnberg}},
  pages        = {{PP060}},
  publisher    = {{VDE Verlag}},
  title        = {{{Conceptual Design of a Portable Measuring Box for Monitoring Ripple Currents affecting the Lifetime of Electrolytic Capacitors in Industrial Open DC Grids}}},
  doi          = {{10.30420/566091166}},
  year         = {{2023}},
}

@misc{10428,
  author       = {{Ludwig, Niklas}},
  pages        = {{97}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe }},
  title        = {{{Stand der Auto-Motorsportfotografie im Zeitalter der digitalen und sozialen Netzwerke}}},
  year         = {{2023}},
}

@misc{10438,
  author       = {{Wagner, Jakob and Sabrotzky, Dean}},
  pages        = {{124}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Umsetzung und Konzeption eines Corporate Designs : Heilpraxis Katharina Wagner}}},
  year         = {{2023}},
}

@misc{10440,
  abstract     = {{People in cities are often exposed to complex mixtures of sounds, some originating from nature along with some created by human activities like traffic noise, sounds of industrial machinery, or music. This research aimed to study how the acoustic environment of a university campus is perceived by people. The procedures for soundscape data collection and analysis were based on the ISO 12913 series. 30 volunteers divided into four groups participated in a “soundwalk” at the campus of the architecture school in Detmold, Germany, filling out questionnaires while sound
measurements and recordings were being taken. After the soundwalk, the data from the questionnaires, sound measurements, recordings, pictures and videos were analyzed. The findings suggest that people’s perception of sound is susceptible to the context, as participants seemed to shift their preference according to the ongoing
activities that drew attention, such as a construction site, sounds from children playing, music and groups of people. The results provide new evidence and insights about the acoustic environment and the soundscape of the university campus and can inform stakeholders to improve environmental quality.}},
  author       = {{Balderrama, Alvaro and Erol, Aylin and Götz, Johanna and Luna-Navarro, Alessandra and Kang, Jian and Arztmann, Daniel and Knaack, Ulrich}},
  booktitle    = {{18th Healthy Buildings Europe Conference}},
  location     = {{Aachen, Germany}},
  publisher    = {{RWTH Aachen}},
  title        = {{{Soundscape Assessment at a University Campus in Detmold, Germany}}},
  year         = {{2023}},
}

@misc{10445,
  author       = {{Arztmann, Daniel}},
  location     = {{New York}},
  title        = {{{Speech and Presentation at Vitruvian Honors & Awards Ceremony}}},
  year         = {{2023}},
}

@misc{10446,
  author       = {{Arztmann, Daniel}},
  booktitle    = {{Handbook Vitruvian Honors & Awards }},
  publisher    = {{Facade Tectonics Institute}},
  title        = {{{Introduction to Vitruvian Honors & Awards Handbook}}},
  year         = {{2023}},
}

@misc{10451,
  author       = {{Vogt, Till Lennart}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Theoretische Grundlagen des Dokumentarfilms und die Realität der praktischen Arbeit: Selbstreflexion des Herstellungsprozesses am Beispiel des Abschlussfilms Aardappel}}},
  year         = {{2023}},
}

@misc{10455,
  author       = {{Lüdemann, Marius}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Barrierearmes Grafikdesign}}},
  year         = {{2023}},
}

@misc{10460,
  author       = {{Salscheider, Kim}},
  pages        = {{119}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Wie verändern virtuelle Filmtechniken die Produktion von Werbefilmen?}}},
  year         = {{2023}},
}

@misc{10462,
  author       = {{Knödel, Tobias}},
  pages        = {{55}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Virtuelle Welten - Das Entstehen glaubwürdiger Landschaften durch Naturalismus in der Unreal Engine}}},
  year         = {{2023}},
}

@misc{10545,
  abstract     = {{Additive manufacturing provides a lucrative alternative for manufacturing of functional prototypes. This paper emonstrates the manufacturing and characterization of hollow core waveguide prototypes with circular cross section using suitable metal and polymers for Terahertz sensing applications. These additively manufactured waveguide prototypes are characterized from 0.1 to 1.25 THz to evaluate the attenuation and coupling losses.}},
  author       = {{Shrotri, Abhijeet Narendra and Mukherjee, Amlan kusum and Lohöfener, Sven and Springer, André and Stübbe, Oliver and Preu, Sascha}},
  booktitle    = {{IRMMW-THz 2023 : 48th International Conference on Infrared, Millimeter and Terahertz Waves : 17-22 September 2023, Montreal, Quebec, Canada}},
  editor       = {{Cooke, David G.}},
  isbn         = {{979-8-3503-3660-3}},
  issn         = {{2162-2035 }},
  location     = {{Montreal, Canada}},
  publisher    = {{IEEE}},
  title        = {{{Additive manufacturing and characterization of hollow core metal and topas waveguides for Terahertz sensor systems}}},
  doi          = {{10.1109/IRMMW-THz57677.2023.10299134}},
  year         = {{2023}},
}

@misc{10552,
  abstract     = {{Die vorliegende Arbeit beschäftigt sich mit der Entstehung und Entwicklung der Masken-Spezialeffekte (SFX) im 21. Jahrhundert. Auch werden diese Entwicklungen im Zusammenhang mit visuellen Effekten (VFX) und deren Bedeutung näher erläutert. Es wird dabei auf häufig verwendete Techniken und Methoden beider Verfahren eingegangen. Weiterhin wird dies anhand des Beispiels des Studentenfilms “Kamera Head“ (2023) von Maximilian Laux verdeutlicht. Damit soll zum Schluss die Frage geklärt werden, welchen Einfluss die zunehmende Nutzung von visuellen Maskeneffekten auf die Masken- Spezialeffekte hat und ob daraus ein Zusammenwirken resultieren kann.}},
  author       = {{Schreckenberg, Maike}},
  pages        = {{97}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Das filmische Maskenbild im 21. Jahrhundert: Möglichkeiten des Zusammenwirkens von Masken-Spezialeffekten (SFX) und visuellen Effekten (VFX)}}},
  year         = {{2023}},
}

@misc{10554,
  author       = {{Tholen, Janna and Schulze Althoff, Gereon and Voss, A. and Upmann, Matthias}},
  booktitle    = {{63. Arbeitstagung des Arbeitsgebietes Lebensmittelsicherheit und Verbraucherschutz 2023}},
  location     = {{Garmisch-Partenkirchen}},
  publisher    = {{Verlag der DVG Service GmbH, Gießen}},
  title        = {{{Automatische Kontaminationserkennung auf Schweineschlachtkörpern mittels Kamerasystem}}},
  year         = {{2023}},
}

@misc{10555,
  abstract     = {{In dieser Studie werden die Auswirkungen einer geringinvestiven Maßnahme zur Reduzierung der Treibhausgasemissionen mittels intelligentem Raumwärmemanagement (iRWM) untersucht, das derzeit – unter Einbindung der Erfahrung der Nutzenden – am Hauptverwaltungsgebäude des Kreises Lippe (Baujahr 1979-80) untersucht wird. Dieses System sollte bei nachgewiesenem Einsparpotenzial auch bei anderen Liegenschaften im Kreis Lippe Anwendung finden, die kurzfristig nicht intensiv saniert werden können.}},
  author       = {{González, María and Schwickert, Susanne and Schakib-Ekbatan, Karin}},
  booktitle    = {{Bauen + Kompakt}},
  issn         = {{2363-8125}},
  publisher    = {{Fraunhofer IRB Verlag}},
  title        = {{{Intelligentes Raumwärmemanagement als gering-investive Energieeinsparmaßnahme in Nichtwohngebäuden - Eine Feldstudie im Kreishaus Lippe vor, während und nach einer energetischen Fassadensanierung}}},
  volume       = {{Oktober}},
  year         = {{2023}},
}

@misc{10560,
  author       = {{Essling, Birgit  and Schwickert, Susanne and Dally, Benjamin and Knauf, Gerald and Wolf, Joachim  and Große-Wöhrmann, Kerstin  and Kreuzer, Britta and Lüke, Karina and Schäfers, Christin and Regehr, Laura and von Borstel, Ruth}},
  pages        = {{37}},
  publisher    = {{Kreis Lippe – Der Landrat }},
  title        = {{{ZIRKULÄRER TUMMELPLATZ - Eine zirkuläre Betrachtung für den Einsatz von Materialien und Objektgruppen für Plätze des öffentlichen Aufenthalts am Beispiel der Funktionsfläche TUMMELPLATZ unter Einbindung und Teilhabe der gesellschaftlichen Akteure}}},
  year         = {{2023}},
}

@misc{10561,
  abstract     = {{The construction of climate-friendly new buildings is not enough to enable greenhouse gas neutrality by the second half of this century. To achieve it, the existing building stock needs to be renovated or retrofitted step by step. This study investigates the impact of a low-investment greenhouse gas emission reduction measure based on intelligent room heat management (IRHM) which is being tested to date on the main administrative building of district Lippe, built in 1979-80, in Germany. This system intends to reduce the energy consumption of further districts’ buildings that, due to the high costs, cannot be intensively renovated in the medium term. IRHM consist in the installation of an intelligent controller that, based on dynamic usage profiles, optimise the operation of the existing heating system. Through presence sensors in the office rooms, the employee’s worktime routine is continually registered to enable the creation of heating patterns that maximize heat comfort during worktime while energy is saved by reducing room temperature when the office is unoccupied. The analysis is based on collected data of heat energy consumption, room climate and user behaviour in five corridors: three with IRHM and two control corridors without it. In both control corridors and two of the IRHM corridors the façade was completely refurbished in 2021 while the remaining one still preserves the original façade to date. Heating demand calculations were conducted to enable a wider exploration of usage scenarios. The results obtained so far, show significantly lower heat consumption in the corridors with IRHM, reaching a maximum of 90% energy consumption reduction compared to the control corridors. An optimized operation of the radiators is clearly recognizable as the system anticipates the employee’s presence and reach the comfort room temperature (set-up temperature) before the beginning of the working time, keeping it while the room in use. It also reacts properly switching down to set-back temperature so far, no presence is detected. According to the heating demand calculations, the implementation of a set-back temperature out of worktime can reduce the energy consumption up to a 48%. Combined with the refurbishment of the façade, the heating demand sinks up to an 87%. Field data shows an even more optimistic perspective, as energy consumption was in average even lower than the calculated demand. The on-site implementation of the IRHM is accompanied by social science research aiming at getting feedback on thermal comfort as well as on employees’ experience with the handling of the intelligent room heat management device. Up to now three online surveys were conducted during heat periods between 2021 and 2023 with 18 to 21 participants from two-person offices. First analyses show that occupants’ satisfaction with temperature changed from a neutral ranking to a slightly positive voting. Room temperature was found to be comfortable as soon as entering the office in the morning. Preferred room temperature shifted over the survey time points from 21°C- 22°C to under 21°C. Further analyses will focus on general energy-relevant attitudes and habits such as windows-door opening.}},
  author       = {{González, María and Schwickert, Susanne and Schakib-Ekbatan, Karin}},
  location     = {{Prag}},
  title        = {{{A Field Study of Greenhouse Gas Emissions Reduction though Intelligent Room Heat Management as low investment Measure tested on the District Hall of Lippe}}},
  year         = {{2023}},
}

@inbook{10568,
  author       = {{Maier, Günter W. and Steinmann, Barbara}},
  booktitle    = {{Personal Goals, Implicit Motives, and Self-Regulated Learning. A Festschrift Honoring Joachim C. Brunstein}},
  editor       = {{Schultheiss, Oliver C.}},
  isbn         = {{978-3-96147-685-5}},
  issn         = {{978-3-96147-686-2}},
  pages        = {{3--28}},
  publisher    = {{FAU University Press}},
  title        = {{{From Everyday Experience to Personal Goals (at Work)}}},
  doi          = {{https://doi.org/10.25593/978-3-96147-686-2 }},
  year         = {{2023}},
}

@misc{10573,
  abstract     = {{Die vorliegende Bachelorarbeit widmet sich der Thematik der Videokunst, einschließlich ihrer geschichtlichen Entwicklung sowie der technischen Mittel und Verfahrensweisen, die bei ihrer Herstellung Anwendung finden. Dabei werden zunächst die technischen Konzepte der analogen Videoverarbeitung detailliert erläutert, wie beispielsweise die Entstehung des elektronischen Bildes, die Funktionsweise der Kathodenstrahlröhre sowie der Aufbau eines Videosignals. Des Weiteren wird untersucht, wie analoge Videoformate in eine digitale Welt integriert werden können. Im Zuge dieser Arbeit werden die kreativen Konzepte der analogen Videobearbeitung, wie etwa Rückkopplungsschleifen, Glitches und Spezialeffekte, und die Erstellung dieser durch die Verwendung von analogem Equipment erforscht. Ein besonderer Fokus liegt dabei auf der Analyse des emotionalen und narrativen Potenzials dieser Techniken, sowie der Erkundung von Themen wie Nostalgie, Subversion und des Traumhaften. Schließlich wird die Rolle der Erzählung in der Videokunst untersucht und die Verwendung analoger Effekte bei der Schaffung von nichtlinearen und experimentellen Handlungssträngen erörtert.
Das Ziel dieser Bachelorarbeit besteht darin, die Möglichkeiten der Videokunst sowie die gestalterischen  Konzepte,  die  durch die Anwendung von analogen Verfremdungen geschaffen werden können, umfassend zu untersuchen und zu bewerten. Dabei wird durch die Verwendung von praxisbezogenen Beispielen und einer kritischen Betrachtungsweise ein umfassendes Verständnis für die kreative Verwendung von analogen Verfremdungen vermittelt.}},
  author       = {{Hinkel, Philipp}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Der Dialog mit einer Maschine - Emotionale und narrative potentiale von analog verfremdeten Videomaterial}}},
  year         = {{2023}},
}

@misc{10575,
  abstract     = {{Thema dieser Arbeit ist das Massenproblem Lebensmittelverschwendung, von dem ein Großteil bei den Endverbrauchern, also im Haushalt entsteht. Durch eine qualitative Umfrage und ergän-zende quantitative Recherche wird deutlich, dass es wenige, immer gleiche Gründe für die große Menge an Lebensmittelabfällen gibt. Dazu gehören vor allem fehlende Aufklärung, falsche Lagerung und zu große Einkaufsmengen. Auch die Missinterpretation vom Mindest-haltbarkeitsdatum oder fehlende Wertschätzung von Lebensmitteln, tragen zu dem Problem bei. Die Lösungen bilden hier Aufklärung und Kommunikation zu Problemausmaß und Lösungsansätzen.
Im weiteren Verlauf wird die Fibel „Essen retten in a Nutshell - Ein-fache Tipps um Lebensmittelverschwendung von A-Z zu verringern“ vorgestellt. Das kurze, übersichtliche Nachschlagewerk adressiert eine große Zielgruppe und zeigt mittels Tipps zur richtigen Aufbewah-rung von Lebensmitteln, wie man die Haltbarkeits dieser verlängern kann. Informationen zu lebensmittelschonendem Einkaufen und Kon-servieren sowie Aufklärung über die Problematik der Lebensmittelver-schwendung, runden den Inhalt des Buches ab. Aufgrund des durch-dachten Layouts ist die Fibel nicht nur optisch ansprechend, sondern auch übersichtlich und intuitiv, sodass sie sich als zweckmäßige und 
attraktiv Informationsquelle eignet.}},
  author       = {{Beckmann, Carolin}},
  pages        = {{36/20}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Essen retten in a Nutshell : Gestaltung einer Fibel für die Minderung von Lebensmittelverschwendung im Haushalt und Konzeption der zugehörigen Marketingkampagne}}},
  year         = {{2023}},
}

@misc{10579,
  author       = {{Stawinoga, Martin}},
  booktitle    = {{WPg : Kompetenz schafft Vertrauen}},
  issn         = {{0340-9031}},
  number       = {{20}},
  pages        = {{1127--1134}},
  publisher    = {{IDW Verlag}},
  title        = {{{Das Rahmenwerk der Taskforce on Nature-related Financial Disclosures (TNFD) – Eine kritische Würdigung der Empfehlungen vom September 2023 zur Berichterstattung über naturbezogene Leistungsindikatoren und Kennzahlen}}},
  year         = {{2023}},
}

@misc{10585,
  abstract     = {{Low-code programming allows the creation of software applications using a graphical user interface with minimal classical programming code ("low code") and without requiring extensive programming knowledge. This puts it in contrast to previous generations of programming languages. The advantages of low-code development are manifold, including the increase of software development capacities through a partial decentralization of the development process, speeding up software development through the low-code approach, and designing software with a strong user-centric focus. Using a low-code development platform can help companies adapt their own business processes to changing requirements more quickly and to make complexity resulting, for example, from heterogeneous customer wishes, manageable. Since many low-code development platforms are available, it is not easy for companies to select and successfully introduce a platform that meets their requirements. For this reason, this article presents a procedure model that assists in the process of selecting and implementing a platform.}},
  author       = {{Hinrichsen, Sven and Nikolenko, Alexander and Becker, Kai Leon and Adrian, Benjamin}},
  booktitle    = {{Human Systems Engineering and Design (IHSED 2023): Future Trends and Applications}},
  editor       = {{Karwowski, Waldemar and Ahram, Tareq and Milicevic, Mario and Etinger, Darko and Zubrinic, Krunoslav}},
  isbn         = {{978-1-958651-88-9}},
  issn         = {{2771-0718}},
  keywords     = {{Complexity Management, Low-Code Development Platform, Process Model for Selection and Implementation}},
  location     = {{Dubrovnik}},
  publisher    = {{AHFE International}},
  title        = {{{How to select and implement a suitable Low-Code Development Platform}}},
  doi          = {{10.54941/ahfe1004155}},
  year         = {{2023}},
}

@misc{10588,
  author       = {{Lohr, Mathias and Margenburg, Bernd}},
  booktitle    = {{Orchidophile}},
  pages        = {{59--74}},
  publisher    = {{Fédération France Orchidées}},
  title        = {{{Dactylorhiza majalis : l’Orchis de mai ou Orchis à larges feuilles}}},
  volume       = {{236}},
  year         = {{2023}},
}

@misc{10602,
  abstract     = {{The anatomical structure of oil palm wood is only to a limited extent comparable to common wood species used in construction. Typical for monocotyledons, the material is composed of high density vascular bundles and a parenchymatous tissue of lower density. In three experiment sets, the local and global moduli of elasticity (MOE) and the flexural strength of oil palm wood based GLT are determined using FEM and various influencing parameters are investigated in a sensitivity analysis. Furthermore, the application of densified tension lamellas is studied. The results of the modelling are compared with the results from mechanical tests. Significant differences, mainly attributed to the specific parameters of the selected material, are observed. The results of this preliminary study serve as a starting point for computer-aided optimisation and modelling of other oil palm-based products.}},
  author       = {{Hackel, Martin}},
  booktitle    = {{Timber for a livable future : World Conference on Timber Engineering : WCTE 2023 : 19-22 June 2023, Oslo, Norway }},
  editor       = {{Nyrud, Anders Q. }},
  isbn         = {{978-1-7138-7329-7}},
  keywords     = {{Oil palm wood, finite element method (FEM), GLT, modulus of elasticity, flexural strength}},
  location     = {{Oslo (Norwegen)}},
  publisher    = {{Curran Associates, Inc.}},
  title        = {{{FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED TIMBER USING FINITE ELEMENT METHOD}}},
  doi          = {{10.52202/069179-0088}},
  year         = {{2023}},
}

@misc{10604,
  author       = {{Hackel, Martin}},
  booktitle    = {{Computational methods in wood mechanics: CompWood 2023 : Dresden, Germany, 5-8 September 2023 }},
  isbn         = {{978-84-123222-7-9}},
  location     = {{Dresden}},
  pages        = {{83--85}},
  publisher    = {{International Center for Numerical Methods in Enginering (CIMNE), }},
  title        = {{{Numerical and Experimental Study of Flexural Properties of Cross-Laminated Timber (CLT) from Oil Palm Wood (Elaeis guineensis JACQ.)}}},
  year         = {{2023}},
}

@misc{10605,
  author       = {{Hackel, Martin}},
  location     = {{Werl}},
  title        = {{{Potenziale der Nutzung klimastabiler Holzarten}}},
  year         = {{2023}},
}

@misc{10606,
  author       = {{Hackel, Martin}},
  location     = {{Bilbao (Spanien)}},
  title        = {{{Smart Wood Center OWL}}},
  year         = {{2023}},
}

@misc{10609,
  abstract     = {{Abstract In this contribution, a method for goal-oriented reanalysis is presented. The process allows predicting the change in a quantity of interest due to structural modifications (design changes), for example, the shape, the topology, material properties, and so forth. The approach is based on a goal-oriented method using primal and dual problems. Furthermore, the procedure is easy to implement in existing finite element programs because no derivatives with respect to the design variables are necessary. The proposed method can be used in classical applications with successive design steps, such as structural optimization, reliability, or structural damage analysis. The repeated structural analysis and calculating quantities of interest involve significant computational effort. Goal-oriented reanalysis methods can reduce the overall computational cost in the numerical simulation.}},
  author       = {{Materna, Daniel}},
  booktitle    = {{Proceedings in applied mathematics and mechanics : PAMM }},
  issn         = {{1617-7061}},
  number       = {{4}},
  pages        = {{e202300164}},
  publisher    = {{Wiley-VCH}},
  title        = {{{Theoretical aspects and applications of goal-oriented reanalysis methods}}},
  doi          = {{https://doi.org/10.1002/pamm.202300164}},
  volume       = {{23}},
  year         = {{2023}},
}

@proceedings{10628,
  editor       = {{Rubart, Jessica and Atzenbeck, Claus}},
  isbn         = {{979-8-4007-0239-6}},
  location     = {{Rome (and online)}},
  publisher    = {{Association for Computing Machinery (ACM)}},
  title        = {{{Proceedings of the 6th international Workshop on Human Factors in Hypertext (HUMAN’23)}}},
  doi          = {{10.1145/3603607}},
  year         = {{2023}},
}

@misc{10641,
  author       = {{Bentler, Dominik and Gabriel, Stefan and Latos, Benedikt and Maier, Günter}},
  booktitle    = {{ Personal quarterly : Wissenschaftsjournal für die Personalpraxis}},
  issn         = {{2365-8622}},
  number       = {{2}},
  pages        = {{1--23}},
  publisher    = {{Haufe-Lexware }},
  title        = {{{Prozessmodell personalorientierter Entscheidungsgestaltung einer künstlichen Intelligenz}}},
  year         = {{2023}},
}

@misc{10642,
  author       = {{Gabriel, Stefan and Bentler, Dominik and Bansmann, Michael and Latos, Benedikt and Kühn, Arno and Dumitrescu, Roman}},
  booktitle    = {{Zeitschrift für wirtschaftlichen Fabrikbetrieb}},
  issn         = {{2511-0896}},
  number       = {{1/2}},
  pages        = {{64--68}},
  publisher    = {{De Gruyter}},
  title        = {{{Soziotechnische Gestaltung einer intelligenten Personaleinsatzplanung}}},
  doi          = {{10.1515/zwf-2023-1009}},
  volume       = {{118}},
  year         = {{2023}},
}

@inbook{10643,
  abstract     = {{Im Verbundvorhaben „FlexDeMo – Flexible und demografierobuste Montageorganisationsformen partizipativ planen, simulieren und gestalten“ wurde durch das interdisziplinäre Zusammenwirken von Anwendungs-, Entwicklungs- und Forschungspartnern eine Methoden- und Werkzeugsammlung zur digitalen Unterstützung für eine partizipative und simulationsbasierte Montageplanung in KMU entwickelt. Diese ist in Form der im Internet frei zugänglichen FlexDeMo-Plattform (https://toolbox.flexdemo.eu) verfügbar. Das webbasierte Planungssystem – die FlexDeMo-Toolbox – stellt Methoden und digitale Werkzeuge bereit, die KMU bei der Gestaltung und Optimierung ihrer Montageorganisation von der Projektinitiierung bis hin zur Umsetzung begleiten und unterstützen. Entwicklung und Anwendung des Planungssystems sind eingebettet in ein partizipatives Vorgehen, das den Fokus auf die aktive Mitwirkung der betroffenen Beschäftigten richtet. Diese wurden im Laufe des Projektes zu bestimmenden Treibern und eigenverantwortlichen Gestaltern ihres Arbeitssystems.}},
  author       = {{Kruse, Christian and Duisberg, Maximilian and Burgert, Florens and Kranz, Michael and Latos, Benedikt and Venhuis, Sebastian and Becks, Daniela and Yavari, Aresch and Steube-Schwier, Oliver and Geuting, Mathieu and Mütze-Niewöhner, Susanne}},
  booktitle    = {{Digitalisierung der Arbeitswelt im Mittelstand : Teil 2}},
  isbn         = {{978-3-662-65857-4}},
  pages        = {{31--70}},
  publisher    = {{Springer Berlin Heidelberg}},
  title        = {{{Digitale Unterstützung für eine partizipative und simulationsbasierte Montageplanung in kleinen und mittleren Unternehmen}}},
  doi          = {{10.1007/978-3-662-65858-1_2}},
  year         = {{2023}},
}

@misc{10009,
  abstract     = {{Die steigende Anzahl von Entwicklungsartefakten (z. B. mechanische oder elektronische Bauteile, Softwarefunktionen, Dokumente) konfrontiert klein- und mittelständische Unternehmen mit der Herausforderung, die vielfältigen Wirkbeziehungen zwischen Artefakten zu überblicken. Die fehlende Kenntnis von Artefaktbeziehungen verursacht Probleme, wie beispielsweise Fehleinschätzungen der Auswirkungen technischer Änderungen auf Abteilungen und das Gesamtsystem. Mit Hilfe der Design Structure Matrix (DSM) lassen sich die Elemente und Beziehungen von komplexen Systemen übersichtlich darstellen. Im vorliegenden Beitrag wird ein auf der DSM basierendes Assistenzsystem vorgestellt, welches Artefakte und Artefaktbeziehungen mittels dreidimensionaler graphbasierter Benutzungs-oberfläche darstellt. Das Assistenzsystem nutzt Algorithmen zur Berechnung von Graphlayouts, Clusteranalysen und Vorhersagen von Änderungsauswirkungen. Es werden die Algorithmen und die resultierenden Darstellungsformen beschrieben. Der Beitrag schließt mit einer Diskussion des Nutzens und zukünftiger Aktivitäten.}},
  author       = {{Herrmann, Jan-Phillip and Trojanowski, Christoph and Imort, Sebastian and Pankrath, Carolin and Deuter, Andreas and Tackenberg, Sven}},
  booktitle    = {{Tagungsband zum Stuttgarter Symposium für Produktentwicklung SSP 2023}},
  editor       = {{Hölzle, Katharina and Kreimeyer, Matthias and Roth, Daniel and Maier, Thomas and Riedel, Oliver}},
  issn         = {{2364-4885}},
  keywords     = {{Design Structure Matrix, Assistenzsystem, Benutzungsoberfläche, Produktentwicklung, Verwaltungsschale}},
  location     = {{Stuttgart}},
  pages        = {{282--293}},
  publisher    = {{Fraunhofer IAO}},
  title        = {{{Ein DSM-basiertes Assistenzsystem zur Visualisierung von Artefaktbeziehungen in der Produktentwicklung von KMU}}},
  year         = {{2023}},
}

@misc{10010,
  abstract     = {{During product development, the customer or internal stakeholders initiate changes concerning the components or functions of a cyber-physical system (CPS). The complexity of such a CPS causes difficulties in evaluating the effects of a component change. Accordingly, product developers need an assistance system to quantify the impact of a component change on hardware, software, system functions, and production processes. Therefore, this paper focuses on concepts to evaluate the effects of component, functional, and process changes and contributes to its clarification and further understanding of the importance and requirements for such an assistance system. The literature review assesses the identified methods regarding their objectives, application objects, level of automation, and relations characteristics. However, the literature review pointed out that the change prediction method from Clarkson et al. (2004) is well-established in the literature and able to quantify the impact of a change.}},
  author       = {{Mordaschew, Viktoria and Herrmann, Jan-Phillip and Tackenberg, Sven}},
  booktitle    = {{Proceedings of the International Conference onEngineering Design (ICED23)}},
  issn         = {{2732-527X }},
  keywords     = {{Product Lifecycle Management (PLM), Change Impact, Complexity, Uncertainty}},
  location     = {{Bordeaux, Frankreich}},
  pages        = {{2655--2664}},
  publisher    = {{Cambridge University Press}},
  title        = {{{METHODS OF CHANGE IMPACT ANALYSIS FOR PRODUCT DEVELOPMENT: A SYSTEMATIC REVIEW OF THE LITERATURE}}},
  doi          = {{https://doi.org/10.1017/pds.2023.266 }},
  year         = {{2023}},
}

@misc{10012,
  abstract     = {{Systems Engineering (SE) is becoming increasingly relevant in industrial application since more stakeholders are involved in engineering activities. To implement SE, companies have to adapt existing engineering processes and methods. This adaption requires knowledge about new methods as well as their integration into the engineering activities. In order to ensure goal-oriented identification of methods for different SE activities in this contribution an action field profile and the Systems Engineering Method Matrix are proposed. The development of both tools is driven by the assumption that most SE activities and methods can be described based on the artefacts the deliver. In order to get feedback about the proposed tools, semi-structured interviews with two industry partners were conducted, focussing on the tool's usability. These interviews underline the basic usability of the tools and their support to identify SE activities to be supported by (new) methods. Moreover, requirements for further development and adaption are derived from the interviews.}},
  author       = {{Ammersdörfer, Theresa and Inkermann, David and Müller, Johannes and Mandel, Constantin and Albers, Albert and Tekaat, Julian and Schierbaum, Anja and Anacker, Harald and Bitzer, Michael and Kleiner, Sven and Herrmann, Jan-Phillip and Krause, Patrik}},
  booktitle    = {{Proceedings of the International Conference on Engineering Design (ICED23)}},
  issn         = {{ 2732-527X}},
  keywords     = {{Systems Engineering (SE), Design methods, Case study, Design process}},
  location     = {{Bordeaux, Frankreich}},
  pages        = {{3245--3254}},
  publisher    = {{Cambridge University Press}},
  title        = {{{SUPPORTING SYSTEMS ENGINEERING ACTIVITIES BY ARTIFACT-ORIENTED DESCRIPTION AND SELECTION OF METHODS}}},
  doi          = {{https://doi.org/10.1017/pds.2023.325}},
  volume       = {{3}},
  year         = {{2023}},
}

@misc{10013,
  abstract     = {{In diesem Beitrag wird ein digitales Menschmodell, ein sogenannter Human Digital Twin, für Personen mit Unterstützungsbedarf vorgestellt. Das Modell leistet einen wertvollen Beitrag für die Abbildung von Arbeitspersonen und deren Kompetenzen in Assistenzsystemen für die Produktionsplanung und -steuerung. Ausgehend vom Stand der Forschung zu Menschmodellen findet der entwickelte Human Digital Twin auf ein Montageassistenzsystem Anwendung.}},
  author       = {{Mordaschew, Viktoria and Duckwitz, Sönke and Tackenberg, Sven}},
  booktitle    = {{Nachhaltig Arbeiten und Lernen - Analyse und Gestaltung lernförderlicher und nachhaltiger Arbeitssysteme und Arbeits und Lernprozesse}},
  keywords     = {{Industrie 4.0, Digitaler Zwilling, Produktionsplanung und -steuerung, Unterstützungsbedarf}},
  location     = {{Hannover}},
  publisher    = {{GfA-Press}},
  title        = {{{Human Digital Twin – ein Konzept für die Fertigungssteuerung einer Werkstatt für behinderte Menschen}}},
  volume       = {{40}},
  year         = {{2023}},
}

@misc{10014,
  abstract     = {{In einem Forschungsprojekt unter wissenschaftlicher Führung der RWTH Aachen University und der TH Ostwestfalen-Lippe wird das FeDiNAR-System entwickelt. Die Abkürzung steht für: Fehler didaktisch nutzbar machen mit AR.}},
  author       = {{Goppold, Marvin and Herrmann, Jan-Phillip and Atanasyan, Alexander and Kießler, Carsten and Dunsche, Lukas and Tackenberg, Sven and Roßmann, Jürgen}},
  booktitle    = {{Werkwandel : Zeitschrift für angewandte Arbeitswissenschaft }},
  issn         = {{2750-5669}},
  number       = {{1}},
  pages        = {{27--29}},
  publisher    = {{ifaa — Institut für angewandte Arbeitswissenschaft e. V.}},
  title        = {{{Berufsausbildung digital mit Mehrwert FeDiNAR — ein virtueller Sandkasten, um aus Fehlern zu lernen!}}},
  year         = {{2023}},
}

@misc{10015,
  abstract     = {{Die operative Fertigungsplanung für die Produktions¬bereiche von Werkstätten für behinderte Menschen steht vor der Herausforderung, die Kompetenzen und die individuellen Verhaltensweisen der Personen mit Unterstützungsbedarf bei einer gleichzeitigen Erfüllung der wirtschaftlichen Vorgaben angemessen zu berücksichtigen. Der vorliegende Beitrag beschreibt daher einen simulationsgestützten Ansatz zur Entwicklung von Fertigungsplänen. Hierzu erfolgt eine Allokation von Aufgaben zu Personen mit Unterstützungsbedarf unter Berücksichtigung der Funktionen von Assistenzsystemen in der Fertigung sowie einer zu erreichenden Lernwirksamkeit einer Aufgabenbearbeitung. Der realisierte Algorithmus wird anhand eines Planungsproblems für die Zielgrößen Wirtschaftlichkeit und Lernförderlichkeit verifiziert.}},
  author       = {{Herrmann, Jan-Phillip and Tackenberg, Sven and Duckwitz, Sönke}},
  booktitle    = {{Nachhaltig Arbeiten und Lernen - Analyse und Gestaltung lernförderlicher und nachhaltiger Arbeitssysteme und Arbeits und Lernprozesse}},
  isbn         = {{978-3-936804-32-4}},
  keywords     = {{Werkstätten für behinderte Menschen, Resource- constrained Project Scheduling Problem, Aufgabenauswahl, Simulation}},
  location     = {{Hannover}},
  publisher    = {{GfA-Press}},
  title        = {{{Konzept für die operative Fertigungsplanung unter Berücksichtigung der Kompetenzen von Personen mit Unterstützungsbedarf in Werkstätten für behinderte Menschen}}},
  volume       = {{40}},
  year         = {{2023}},
}

@misc{10016,
  abstract     = {{Hohe Freiheitsgrade hinsichtlich des Entscheidungsspielraums von Arbeitspersonen erschweren die Prognose der Bearbeitungsreihenfolgen und der damit verbundenen Fertigstellungstermine in produzierenden Unternehmen. Der vorliegende Beitrag stellt ein Forschungsvorhaben über die Vorhersage der Aufgabenauswahl von Arbeitspersonen in der Kleinserien- und Einzelfertigung vor. Es werden die Zielsetzung und Methodik für die Erhebung und Beschreibung von Entscheidungskriterien und -regeln von Arbeitspersonen beschrieben und diskutiert. Zentrale Herausforderung der zu konzipierenden empirischen Studie ist die Erhebung von Daten zum Entscheidungsverhalten mit hoher prädiktiver Validität. Die Daten werden genutzt, um ein KI-gestütztes Simulationsmodell zur Vorhersage der individuellen Aufgabenauswahl zu entwickeln. Der Beitrag schließt mit einem Ausblick auf zukünftige Aktivitäten.}},
  author       = {{Herrmann, Jan-Phillip and Tackenberg, Sven and Nitsch, Verena}},
  booktitle    = {{Nachhaltig Arbeiten und Lernen - Analyse und Gestaltung lernförderlicher und nachhaltiger Arbeitssysteme und Arbeits und Lernprozesse}},
  isbn         = {{978-3-936804-32-4}},
  keywords     = {{Aufgabenauswahl, Simulation, Künstliche Intelligenz, Produktion, Entscheidungskriterien, Empirische Studie}},
  location     = {{Hannover}},
  publisher    = {{GfA-Press}},
  title        = {{{Vorhersage des individuellen Entscheidungsverhaltens von Arbeitspersonen in der Produktion bezüglich der Aufgabenauswahl mittels KI-gestützter Simulation}}},
  volume       = {{40}},
  year         = {{2023}},
}

@inbook{10058,
  author       = {{Baetge, Jörg and Kümmel, Jens and Schulz, Roland and Wiese, Jörg}},
  booktitle    = {{Praxishandbuch der Unternehmensbewertung}},
  editor       = {{Peemöller, Volker H.}},
  isbn         = {{978-3-482-51188-2}},
  pages        = {{423--582}},
  publisher    = {{NWB Verlag}},
  title        = {{{Darstellung der Discounted-Cashflow-Verfahren (DCF-Verfahren) mit Beispiel}}},
  year         = {{2023}},
}

@misc{13070,
  abstract     = {{Das inIT der TH OWL hat sich auch in den Jahren 2021 und 2022 in einer Zeit starken gesellschaftlichen Wandels hervorragend positioniert. Dabei wurde die Ausrichtung auf die Intelligente Automation weiter geschärft, ohne die technologische Basis der industriellen Informations- und Kommunikationstechnologien, wie sie das inIT definiert, zu verlassen.}},
  author       = {{Lohweg, Volker and Röcker, Carsten}},
  pages        = {{232}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Institut für industrielle Informationstechnik / Institute Industrial IT : Jahresbericht 2021 - 2022}}},
  year         = {{2023}},
}

@book{13134,
  author       = {{Rief, Stefan and Vetter, Andreas}},
  isbn         = {{978-3-7667-2612-4}},
  keywords     = {{Best Workspaces, Preisträger, Geschichte 2023}},
  pages        = {{368}},
  publisher    = {{Callwey}},
  title        = {{{Best Workspaces}}},
  year         = {{2023}},
}

@misc{13305,
  abstract     = {{Gegenwärtig wird der historische Baustoff Lehm im Bauwesen wieder deutlich häufiger eingesetzt. In Wohn- und Nichtwohngebäuden findet er als Putz, Bauplatte oder gestalterisches Element in Form von Stampflehm oder Lehmsteinen zunehmend Verwendung. Da es wenige gesicherte Messwerte zu den Schallabsorptionseigenschaften von Lehmoberflächen gibt, wurden im Rahmen des DBU-geförderten Forschungsprojektes ECOsights die frequenzabhängigen Schallabsorptionsgrade einer klassischen Stampflehmwand sowie einer mit lehmverputzter Oberfläche mit dem Hallraum-Verfahren nach EN ISO 354 messtechnisch ermittelt. Außerdem wurde eine Versuchsreihe mit Messungen mit dem Impedanzrohr (Kundtsches Rohr) nach DIN EN ISO 10534-1 mit Stampflehm durchgeführt. Dabei wurden neben dem Absorptionsgrad auch die Gewichtsabnahme und die Veränderung der Oberflächenstruktur der Proben erfasst. Für die untersuchten Lehmoberflächen haben sich höhere Schallabsorptionsgrade als die Planungswerte für gleichwertige, zweckentsprechend in der Baupraxis eingesetzte Materialien ergeben.}},
  author       = {{Schwickert, Susanne and Blaschke, Kim Kristin and Kob, Malte}},
  booktitle    = {{Bauphysik : Wärme, Feuchte, Schall, Brand, Licht, Energie }},
  issn         = {{1437-0980}},
  keywords     = {{Hallraum, Kundtsches Rohr, Lehm, Lehmputz, Raumakustik, Schallabsorptionsgrad, Schallabsorptionsvermögen, Schallimpedanzrohr, Stampflehm}},
  number       = {{6}},
  pages        = {{289--296}},
  publisher    = {{Ernst & Sohn}},
  title        = {{{Schallabsorptionseigenschaften von Lehmoberflächen}}},
  doi          = {{10.1002/bapi.202300018}},
  volume       = {{45}},
  year         = {{2023}},
}

@phdthesis{13335,
  abstract     = {{The process of thermal preservation of liquid foods is a safety-relevant process step in the processing of products such as fruit juices and is associated with a high-energy expenditure and safety margin. There are already various approaches to improve this conventionally managed process step in terms of product and resource preservation. Compared to these novel technologies, the use of real-time process analytics offers great potential to improve already existing process plants by implementing inline capable process analytical tools. This allows direct control of the reactions taking place and changes during the running process. Instead of post process, random product control, quality control during the process can be made rendered. The chemical and pharmaceutical industry serves as a reference industry for the use of process analytical tools, although the reactions and product matrices are less complex. In the food industry, on the other hand, there is a greater variation in raw materials and intermediate products. In addition, a large number of reactions can take place in parallel within a process, and the physical states and properties of the individual components can vary. A uniform set of rules for the use of process analytical tools does not exist here. Each product, each process provides its own research potential, so that a large research gap opens up in the area of the food industry.
In order to contribute to closing this gap, this thesis presents a novel approach to improve the process of pasteurization of liquid food. For fruit juices as an application, near infrared spectroscopy in combination with chemometric methods was applied to make the process more product specific. Based on known weaknesses of the process, the relevant aspects for a product-specific treatment were identified. In the further course, the suitability of near infrared spectroscopy as a process analytical tool in the process of pasteurization was verified. Moreover, it was investigated whether a sufficiently accurate identification of the product type as well as the microbiologically relevant properties can be achieved by the application of chemometric methods. In the course of this, the suitability of the measurement methodology was confirmed and solutions were established for any process influences. The product classification and description of the microbiologically relevant parameters extract content and pH value were also implemented with sufficient accuracy. Knowing the destruction kinetics of relevant microorganisms, the product-specific determination of target values for the necessary lethal heat input could be realized. In addition, an analysis of the actual values was carried out on the basis of a chemometric regression method by inferring the microbiological pasteurization effect through the chemical reaction of acid hydrolytic sucrose degradation by means of the indirect approach. This required knowledge of the chemical reaction kinetics and mahematical modeling of the degradation behavior. The novel approach could be confirmed by calculations using results from off-line analysis, whereas the use of near infrared spectroscopy as an inline method still revealed potential for optimization with respect to measurement accuracies.
In summary, the results of this work provide a promising opportunity to make conventional processes for the preservation of liquid foods more product-specific by using near-infrared spectroscopy as an inline-capable and multimodal sensor technique, leading to an increase in process efficiency and product quality.}},
  author       = {{Weishaupt, Imke}},
  keywords     = {{fruit juice pasteurization, near infrared spectroscopy, process optimization, multivariate statistics, inline process analytics, Fruchtsaftpasteurisation, Prozessoptimierung, Nahinfrarotspektroskopie, multivariate Statistik, Inline-Prozessanalytik}},
  pages        = {{144}},
  publisher    = {{Technische Universität Berlin}},
  title        = {{{Near infrared spectroscopy as inline analytical tool to optimize the pasteurization process of liquid foods}}},
  doi          = {{https://doi.org/10.14279/depositonce-17804}},
  year         = {{2023}},
}

@misc{13373,
  abstract     = {{This master thesis, Forte das Velas, investigates the architectural potential of revitalizing a historic coastal fortress through a contemporary program that balances preservation, public accessibility, and spatial reinterpretation. Situated within a sensitive maritime landscape, the project explores how heritage structures can be transformed into culturally active spaces without compromising their historical identity.
The design approach is based on minimal and reversible interventions that respect the existing masonry, proportions, and defensive morphology of the fort. New architectural elements are introduced as clearly legible additions, creating a dialogue between past and present rather than imitation. Programmatically, the proposal combines cultural, educational, and public functions, allowing the fortress to operate as an open civic landmark rather than a closed monument.
Spatial strategies emphasize views, thresholds, and sequences between interior and exterior, reinforcing the relationship between architecture, horizon, and terrain. Material choices and construction methods are guided by durability, adaptability, and low environmental impact, positioning the project within a broader discourse on sustainable heritage reuse.
Forte das Velas ultimately demonstrates how historical military architecture can be reimagined as an inclusive and future-oriented public infrastructure, merging cultural continuity with contemporary spatial needs.}},
  author       = {{Konschake, Leon}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Forte das Velas - Revitalisierung einer Ruine des 17. Jahrhunderts}}},
  year         = {{2023}},
}

@misc{13417,
  author       = {{Pusch, Lisa}},
  location     = {{Bielefeld}},
  title        = {{{Circular Economy im Bausektor:Lippe zirkulär, RE-BUILD-OWL und LiRek im Kreis Lippe}}},
  year         = {{2023}},
}

@misc{13419,
  author       = {{Pusch, Lisa}},
  location     = {{Online}},
  title        = {{{Regionale Pilotprojekte zum zirkulären Bauen in Ostwestfalen-Lippe}}},
  year         = {{2023}},
}

@misc{13420,
  author       = {{Pusch, Lisa and Grabbe, Rainer}},
  location     = {{Hamburg}},
  title        = {{{Modellvorhaben RE-BUILD-OWL: Planen und Bauen zirkulär – Kommunen auf dem Weg zu neuen Routinen}}},
  year         = {{2023}},
}

@misc{13421,
  author       = {{Pusch, Lisa}},
  location     = {{Detmold}},
  title        = {{{Zirkuläres Bauen: Einführung, Methoden und Potenziale}}},
  year         = {{2023}},
}

@misc{13423,
  author       = {{Pusch, Lisa and Schäfers, Christin}},
  location     = {{Kopenhagen}},
  title        = {{{Workshop for advisors: facilitating teams on the Charette 2023}}},
  year         = {{2023}},
}

@misc{13581,
  abstract     = {{ObjectiveMany people, including patients with eating disorders (EDs), experience an increased urge for physical activity. "Trait"-like activity in patients with EDs is assessed by existing questionnaires, but there are few clinically validated assessments of a "state" urge to be physically active. Here, we developed and validated the State Urge to be Physically Active-Questionnaire (SUPA-Q). MethodsAfter developing and piloting the items, N = 126 patients with EDs (mostly anorexia nervosa and bulimia nervosa) took part in our mixed-longitudinal validation study with one primary assessment for all patients and a secondary assessment for a subsample of patients. Cronbach's & alpha; and split-half-methods served as measures of consistency and reliability. Correlations with other questionnaires were used to determine convergent and divergent validity, and confirmatory factor analysis was used for investigating factorial validity. We used paired-samples t-tests for repeated assessments to investigate change sensitivity. ResultsWe found the SUPA-Q to be highly consistent, and reliable and to demonstrate convergent, divergent, and factorial validity. The comparison of SUPA-Q scores from repeated assessments within a subsample of patients demonstrated the questionnaire's change sensitivity, Cohen's d = 0.48. Moreover, an increase in SUPA-Q scores was associated with a less positive mood, more anxiety, more body dissatisfaction, more tenseness, less feelings of control, and more stress. DiscussionThe newly developed SUPA-Q may help to accentuate the necessity to evaluate and address the acute urge to engage in physical activity in patients with EDs in clinical practice and ultimately support tailoring treatments to patients' unique symptom patterns. The questionnaire is available at .}},
  author       = {{Amin, Lina and Halbeisen, Georg and Braks, Karsten and Huber, Thomas J.J. and Paslakis, Georgios}},
  booktitle    = {{Brain and Behavior}},
  issn         = {{2162-3279}},
  keywords     = {{eating disorders, physical activity, psychopathology, psychotherapy, symptom assessment}},
  number       = {{10}},
  publisher    = {{Wiley}},
  title        = {{{The State Urge to be Physically Active-Questionnaire (SUPA-Q): Development and validation of a state measure of activity urges in patients with eating disorders}}},
  doi          = {{10.1002/brb3.3220}},
  volume       = {{13}},
  year         = {{2023}},
}

@misc{13582,
  abstract     = {{IntroductionEating disorders (EDs) are among the most severe mental disorders in women and men, often associated with high symptom burden and significant limitations in daily functioning, frequent comorbidities, chronic course of illness, and even high mortality rates. At the same time, differences between men and women with EDs remain poorly explored. MethodsIn this study, we compared 104 men to 104 diagnosis-matched women with EDs regarding sociodemographic and clinical features. Using latent class mixture modelling, we identified four distinct patient subgroups based on their sociodemographic features. ResultsMen with EDs had significantly higher odds than women to belong to a "single-childfree-working" class. Moreover, while there were few overall differences in ED-related symptoms and general psychopathology between men and women, single-childfree-working men with EDs presented with higher general psychopathology symptoms than men in the other classes. DiscussionWe discuss how considering sex and gender along with further sociodemographic differences in EDs may help to improve ED diagnosis and treatment.}},
  author       = {{Traut, Philipp and Halbeisen, Georg and Braks, Karsten and Huber, Thomas J.J. and Paslakis, Georgios}},
  booktitle    = {{Frontiers in Psychiatry}},
  issn         = {{1664-0640}},
  keywords     = {{anorexia nervosa, bulimia nervosa, binge-eating disorder, gender differences, psychotherapy}},
  publisher    = {{Frontiers Research Foundation}},
  title        = {{{Sociodemographic and clinical features of men and women with eating disorders: a diagnosis-matched, retrospective comparison among inpatients}}},
  doi          = {{10.3389/fpsyt.2023.1192693}},
  volume       = {{14}},
  year         = {{2023}},
}

@misc{13583,
  abstract     = {{Organ transplantation is associated with significant physical and psychological burden for the recipients. Qualitative reports indicate that organ recipients develop donor and donation images (DDI)—conceptions of the donor and/or the organ. A deeper understanding of DDI is needed in the care of transplant recipients. To present the current state of knowledge, we searched for and identified DDI-related publications in PubMed and Scopus. Inclusion criteria were (1) studies addressing transplant recipients, and (2) English or German language. Twenty-one studies of individuals with transplanted hearts, lungs, or kidneys were included in this scoping review. Prevalence for DDI ranged from 6% to 52.3%. DDI occurs both before and after transplantation and includes ideas about the donor as well as whether and how the recipient’s personality may be altered by the transplanted organ. Some transplant recipients did indeed report personality changes following transplantation due to the adoption of assumed donor characteristics. One study showed a positive association between the presence of DDI and anxiety scores and one described a coping effect. DDI is understudied and should be systematically assessed to improve care for the vulnerable group of individuals undergoing organ transplantation. Current research gaps and future directions are discussed.}},
  author       = {{Laskowski, Nora M.  and Brandt, Gerrit and Tigges-Limmer, Katharina and Halbeisen, Georg and Paslakis, Georgios}},
  booktitle    = {{Journal of Clinical Medicine}},
  issn         = {{2077-0383}},
  keywords     = {{donor image, donation image, organ integration, organ transplantation, heart transplantation, lung transplantation, kidney transplantation, DDI, psychocardiology, scoping review}},
  number       = {{3}},
  publisher    = {{MDPI}},
  title        = {{{Donor and Donation Images (DDI)-A Scoping Review of What We Know and What We Don't}}},
  doi          = {{10.3390/jcm12030952}},
  volume       = {{12}},
  year         = {{2023}},
}

@misc{13586,
  author       = {{Paslakis, Georgios and Dimitropoulos, Gina and Halbeisen, Georg}},
  booktitle    = {{Frontiers in Psychiatry}},
  issn         = {{1664-0640}},
  keywords     = {{anorexia nervosa, bulimia nervosa, binge-eating disorder, social diversity, gender bias, ethnic bias}},
  publisher    = {{Frontiers Research Foundation}},
  title        = {{{A global perspective on diversity in eating disorders}}},
  doi          = {{10.3389/fpsyt.2023.1276078}},
  volume       = {{14}},
  year         = {{2023}},
}

@misc{13607,
  abstract     = {{Background
Previous investigations on the Eating Disorder Examination-Questionnaire (EDE-Q) factor structures in men have been restricted to non-clinical settings, limiting conclusions about the factorial validity in men with eating disorders (ED). This study aimed to examine the factor structure of the German EDE-Q in a clinical group of adult men with diagnosed ED.
Methods
ED symptoms were assessed using the validated German version of the EDE-Q. Exploratory factor analysis (EFA) using principal-axis factoring based on polychoric correlations was conducted for the full sample (N = 188) using Varimax-Rotation with Kaiser-Normalization.
Results
Horn’s parallel analysis suggested a five-factor solution with an explained variance of 68%. The EFA factors were labeled “Restraint” (items 1, 3–6), “Body Dissatisfaction” (items 25–28), “Weight Concern” (items 10–12, 20), “Preoccupation” (items 7 and 8), and “Importance” (items 22 and 23). Items 2, 9, 19, 21, and 24 were excluded due to low communalities.
Conclusions
Factors associated with body concerns and body dissatisfaction in adult men with ED are not fully represented in the EDE-Q. This could be due to differences in body ideals in men, e.g., the underestimation of the role of concerns about musculature. Consequently, it may be useful to apply the 17-item five-factor structure of the EDE-Q presented here to adult men with diagnosed ED.}},
  author       = {{Laskowski, Nora M. and Halbeisen, Georg and Braks, Karsten and Huber, Thomas J.J. and Paslakis, Georgios}},
  booktitle    = {{Journal of Eating Disorders}},
  issn         = {{2050-2974}},
  keywords     = {{Eating disorders, Eating Disorder Examination-Questionnaire, EDE-Q, Factor analysis, Men’s health, Body dissatisfaction, Muscularity}},
  number       = {{1}},
  publisher    = {{BioMed Central}},
  title        = {{{Factor structure of the Eating Disorder Examination-Questionnaire (EDE-Q) in adult men with eating disorders}}},
  doi          = {{10.1186/s40337-023-00757-4}},
  volume       = {{11}},
  year         = {{2023}},
}

@misc{13631,
  abstract     = {{This study examined the dimensional structure of the German Eating Disorder Examination-Questionnaire (EDE-Q) in clinical groups of women with Anorexia Nervosa (AN; N = 821), Bulimia Nervosa (BN; N = 573), and Binge-Eating Disorder (BED; N = 359) using Exploratory Graph Analyses (EGA). The EGA yielded a 12-item-four-dimension structure for the AN group (subscales “Restraint”, “Body Dissatisfaction”, “Preoccupation”, “Importance”), a 20-item-five-dimension structure for the BN group (subscales “Restraint”, “Body Dissatisfaction”, “Eating Concern”, “Preoccupation”, “Importance”), and a 17-item-four-dimension structure for the BED group (subscales “Restraint”, “Body Dissatisfaction”, “Concern”, “Importance”). This first investigation of the EDE-Q's dimensional structure using EGA suggests that the original factor model may be suboptimal for specific clinical ED samples and that alternative scoring should be considered when screening specific cohorts or evaluating the effects of interventions.}},
  author       = {{Laskowski, Nora M. and Halbeisen, Georg and Braks, Karsten and Huber, Thomas J. and Paslakis, Georgios}},
  booktitle    = {{Journal of Psychiatric Research}},
  issn         = {{0022-3956}},
  keywords     = {{Exploratory graph analysis, EGA, EDE-Q, Eating disorder examination questionnaire, Eating disorder, Psychotherapy}},
  number       = {{7}},
  pages        = {{254--261}},
  publisher    = {{Elsevier BV}},
  title        = {{{Exploratory graph analysis (EGA) of the dimensional structure of the eating disorder examination-questionnaire (EDE-Q) in women with eating disorders}}},
  doi          = {{10.1016/j.jpsychires.2023.05.063}},
  volume       = {{163}},
  year         = {{2023}},
}

@misc{13632,
  abstract     = {{Objective: Phenotypical comparisons between individuals with obesity without binge eating disorder (OB) and individuals with obesity and comorbid binge eating disorder (OB + BED) are subject to ongoing investigations. At the same time, gender-related differences have rarely been explored, raising the question whether men and women with OB and OB + BED may require differently tailored treatments.Method: We retrospectively compared pre- versus post-treatment data in a matched sample of n = 180 men and n = 180 women with OB or OB + BED who received inpatient treatment.Results: We found that men displayed higher weight loss than women independent of diagnostic group. In addition, men with OB + BED showed higher weight loss than men with OB after 7 weeks of treatment.Conclusions: The present findings add to an emerging yet overall still sparse body of studies comparing phenotypical features and treatment outcomes in men and women with OB and OB + BED; implications for further research are discussed.Clinical Trial Registration: The study was prospectively registered with the German Clinical Trial Register as part of application DRKS00028441.}},
  author       = {{Brandt, Gerrit and Halbeisen, Georg and Braks, Karsten and Huber, Thomas J. and Paslakis, Georgios}},
  booktitle    = {{European Eating Disorders Review}},
  issn         = {{1099-0968}},
  keywords     = {{binge eating disorder, diversity, gender, obesity, psychotherapy}},
  number       = {{3}},
  pages        = {{413--424}},
  publisher    = {{Wiley}},
  title        = {{{Gender differences in individuals with obesity and binge eating disorder: A retrospective comparison of phenotypical features and treatment outcomes}}},
  doi          = {{10.1002/erv.2972}},
  volume       = {{31}},
  year         = {{2023}},
}

@misc{13650,
  author       = {{Uhlendorff, Selina and Hernández Rodriguez, Tanja and Frahm, Björn and Pein-Hackelbusch, Miriam}},
  location     = {{Lemgo, Germany}},
  title        = {{{Systematic Preprocessing of Dielectric Spectroscopy Data and Estimating Viable Cell Densities}}},
  year         = {{2023}},
}

@inbook{13786,
  abstract     = {{Due to the superior job performing abilities and increasing computational capabilities, collaborating with artificial-intelligence-based services (AIBS or AI-based services) will be inevitable for employees in the service context. AI-based services in the form of virtual (e.g., chatbot) or physical (e.g., service robot) embodiments, which are characterized by a higher degree of autonomy and are intended to augment the tasks of human employees in a highly collaborative way, will increasingly become an integral part of employee’s work environment. Semi-structured interviews and a focus group discussion have been used to identify constructs driving employees’ perception of AI-based services and their impact on wellbeing. Combined with a thorough literature analysis, relations between the identified constructs have been derived from introducing a conceptual model of employees’ willingness to collaborate (WTC). This study identifies technology characteristics, job demands, resources, and control as constructs, directly influencing employees’ perceived risk of AI-based services.}},
  author       = {{Paluch, Stefanie and Wittkop, Thomas}},
  booktitle    = {{Artificial Intelligence in Customer Service : The Next Frontier for Personalized Engagement }},
  editor       = {{Sheth, Jagdish N. and Jain, Varsha  and Mogaji, Emmanuel  and Ambika, Anupama }},
  isbn         = {{978-3-031-33897-7}},
  keywords     = {{Artificial intelligence, AI-based services, Willingness to collaborate, Employees’ wellbeing}},
  pages        = {{281–302}},
  publisher    = {{Springer International Publishing AG}},
  title        = {{{Role of Risk on Employees’ Willingness to Collaborate with Artificial Intelligence and its Impact on Wellbeing}}},
  doi          = {{10.1007/978-3-031-33898-4_12}},
  year         = {{2023}},
}

@misc{13828,
  abstract     = {{Vaseline, also referred to as petrolatum, is a colloidal dispersion of liquid-crystalline structures of hydrocarbons derived from petroleum. It has long been recognized for its versatile applications in the pharmaceutical industry, with its use in the formulation of various topical medications, wound care products, and drug delivery systems. For pharmaceutical use, petrolatum has to meet the quality standards described in its Pharmacopoeia monograph. The comprised test ranges allow for a broad range of Vaseline qualities on the market, while the tests themselves only poorly discriminate between grades. The only differentiating properties are related to the melting behavior, which is tested via drop point analysis, and the consistency, addressed in the functionality-related characteristics section. In this study, we propose the hypothesis that Near-infrared spectroscopy (NIRS) could be a comparably simple method to evaluate the crystalline behavior of Vaseline qualities. We expect such information to provide additional details for Vaseline quality discrimination. This discrimination would allow the most suitable petroleum jelly to be selected for an existing formulation when the previous one needs to be replaced; for example, due to a manufacturer change. We demonstrate that NIRS in transmission and reflectance mode obtained by traditional continuous spectra acquisition and fragmented NIR spectra acquisition through multi-optical, multi-modal excitation, respectively, can both serve as a basis for detecting Vaseline quality differences, which we have further proven by thermal analysis and tests with semisolid formulations. Additionally, we demonstrate that a lower-cost multi-optical spectrometer in reflectance mode can detect Vaseline quality differences in rotated samples.}},
  author       = {{Fliedner, Niels Hendrik and Lohweg, Volker and Al-Karawi, Claudia and Pein-Hackelbusch, Miriam}},
  booktitle    = {{2023 IEEE 21st International Conference on Industrial Informatics (INDIN 2023)}},
  editor       = {{Dörksen, Helene and Scanzio, Stefano and Jasperneite, Jürgen and Wisniewski, Lukasz and Man, Kim Fung and Sauter, Thilo and Seno, Lucia and Trsek, Henning and Vyatkin, Valeriy}},
  isbn         = {{978-1-6654-9313-0}},
  keywords     = {{Reflectivity, Industries, Wounds, Hydrocarbons, Behavioral sciences, Thermal analysis, Sensors}},
  location     = {{Lemgo}},
  publisher    = {{IEEE}},
  title        = {{{A Novel Spectroscopic Approach for Vaseline Quality Discrimination}}},
  doi          = {{10.1109/indin51400.2023.10218318}},
  year         = {{2023}},
}

@misc{9188,
  author       = {{Heister, Lena and Frühwald-König, Katja}},
  booktitle    = {{Proceedings of 2nd World Conference on Byproducts of Palms and Their Applications}},
  editor       = {{Jawaid, Mohammad and Midani, Mohamad and Khiari, Ramzi}},
  isbn         = {{978-981-19-6194-6}},
  issn         = {{2662-317X }},
  location     = {{online}},
  pages        = {{29--44}},
  publisher    = {{Springer Nature}},
  title        = {{{Glued Laminated Timber from Oil Palm Timber – Beam Structure, Production and Elastomechanical Properties}}},
  doi          = {{10.1007/978-981-19-6195-3_3}},
  volume       = {{19}},
  year         = {{2023}},
}

@misc{9235,
  abstract     = {{The article examines the existing infrastructure of open common spaces within two New Belgrade mass housing blocks (Blocks 23 and 70a) through a typo-morphological analysis. These spaces between the buildings, although the most neglected, underused, and deteriorated components of mass housing neighbourhoods, are at the same time crucial to the quality, vitality and integrated governance of these neighbourhoods. They represent the primary tangible commons in cities and neighbourhoods. The question of urban commons is increasingly present in scientific literature, urban and architectural discourse. Nevertheless, approaches exploring the spatiality of the urban commons are scarce, leading to insufficient understanding of the spatial aspect and potentials of the already existing commons. Therefore, this study includes (1) identification, typological decoding and classification of the common spaces, focusing on the case of New Belgrade blocks, followed by (2) analysis of the spatial patterns and integration of the identified spaces within the blocks. The study confirms the complexity and diverse typology of the common spaces. It finds that the in-between, common spaces contribute to higher integration of different segments of the blocks. The open common spaces have an essential role in humanisation of the blocks, and thus the quality of life in the blocks as integrated neighbourhoods. The findings indicate that the spatial setting of the open common spaces in New Belgrade blocks allows for (re)emergence of collective practices, leading to inclusive and integrated rehabilitation of the neighbourhoods.}},
  author       = {{Dragutinovic, Anica and Quist, Wido and Pottgiesser, Uta}},
  booktitle    = {{Frontiers of Architectural Research}},
  keywords     = {{Common spaces, Mass housing, Spatial patterns, Analytical framework, Typo-morphology}},
  number       = {{3}},
  pages        = {{444--457}},
  publisher    = {{Elsevier}},
  title        = {{{Spatiality of the urban commons: Typo-morphology of the open common spaces in New Belgrade mass housing blocks}}},
  doi          = {{https://doi.org/10.1016/j.foar.2022.11.004}},
  volume       = {{12}},
  year         = {{2023}},
}

@misc{9353,
  author       = {{Reinschmidt, Jan}},
  pages        = {{54}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Möglichkeiten zur kosteneffizienten Umsetzung von Virtual Production}}},
  year         = {{2023}},
}

@misc{9358,
  abstract     = {{Real-time human-centered assistance in industrial processes depends on the individual history of the work person’s activities in the work system and requires adequate methods for tracking the person’s actions. Most research in human activity recognition is based on recognizing actions from video data using computer vision methods. Digital equipment, standardized machine data interfaces, and smart wearable devices extend the possibilities to describe the current state of the work system. Petri nets have already been applied to human activity recognition, however, without the requirement of detecting actions in real-time. This paper proposes a Petri net architecture that enables hierarchical description-based human activity recognition in industrial work processes. We present an extension, a Partitioned Colored Petri Net, based on the colored Petri net formalism that infers activities from state transitions of the work system in real-time. In a case study, we demonstrate the Petri net’s application for an error-based learning system that visualizes error consequences in augmented reality using experimentable digital twins.}},
  author       = {{Herrmann, Jan-Phillip and Atanasyan, Alexander and Casser, Felix and Tackenberg, Sven}},
  booktitle    = {{Procedia Computer Science}},
  issn         = {{1877-0509}},
  keywords     = {{Colored Petri net, Human-centered Assistance, Experimentable Digital Twins}},
  location     = {{Österreich}},
  pages        = {{1188--199}},
  publisher    = {{Elsevier}},
  title        = {{{A Petri Net Architecture for Real-Time Human Activity Recognition in Work Systems}}},
  doi          = {{https://doi.org/10.1016/j.procs.2022.12.317}},
  volume       = {{217}},
  year         = {{2023}},
}

@book{9414,
  author       = {{Faupel, Christian and Neumann, Philipp}},
  isbn         = {{978-3-347-72605-5}},
  pages        = {{180}},
  publisher    = {{tredition}},
  title        = {{{Betriebliche Kosten- und Leistungsrechnung. Vorlesungsbegleitendes Lehrbuch}}},
  year         = {{2023}},
}

@misc{9422,
  abstract     = {{Global trends towards the rapidly increasing use of information systems (IS) apply to the IS research domain and related publications. Nonetheless, investigations of trends in publication behavior and emergence as well as changes in IS research are usually narrowly focused. This article contributes to the growing number of articles published in the IS domain by analyzing the evolution of trends and major research fields as well as the regional distribution of publications in the AIS Senior Scholars' Basket of Eight (AIS Bo8) and the International Conference on Information Systems (ICIS), changes in publication behavior, and the emergence of as well as changes to IS research fields and trends. Our semi-automated literature review integrates scientific methods to support the review and classification of publications. Based on 6692 articles published in the ICIS proceedings and the AIS Bo8 journals in a period of 16 years, we elaborate the key characteristics of research development. Our contribution provides and interprets a contemporaneous account of contextual factors influencing the IS research domain. Thus, our study enhances understanding of the development of the IS research domain.}},
  author       = {{Guhr, Nadine and Werth, Oliver and Passlick, Jens  and Breitner, Michael H.}},
  booktitle    = {{Information}},
  issn         = {{2078-2489}},
  keywords     = {{global information systems research, research trends, research field, (semi-) automated literature review, latent semantic indexing}},
  number       = {{2}},
  pages        = {{94}},
  publisher    = {{MDPI}},
  title        = {{{Trends of Top IS Research by Region, Outlet, and Emergence: A Semi-Automated Literature Review}}},
  doi          = {{10.3390/info14020094}},
  volume       = {{14}},
  year         = {{2023}},
}

@misc{9429,
  abstract     = {{Die Project Task Force on European Sustainability Reporting Standards (PTF-ESRS) der European Financial Reporting Advisory Group (EFRAG) hat der interessierten Öffentlichkeit im April 2022 dreizehn Konsultationsentwürfe zur Nachhaltigkeitsberichterstattung zur Verfügung gestellt. Die breite öffentliche Wahrnehmung der erstmaligen Entwicklung von Standards für die Nachhaltigkeitsberichterstattung innerhalb der Europäischen Union kommt durch die Abgabe von über 750 Stellungnahmen zu diesem Konsultations­verfahren zum Ausdruck. Im vorliegenden Beitrag werden die von in Deutschland ansässigen Interessengruppen abge­gebenen Stellungnahmen zu den Konsultationsentwürfen analysiert. Dabei wird der große Diskussionsbedarf deutlich. In einem Folgebeitrag wird der Frage­stellung nachgegangen, ob und inwiefern die hierbei geäußerten Kritikpunkte Eingang in die finalen EFRAG-Standards gefunden haben.}},
  author       = {{Pasch, Lilia and Stawinoga, Martin}},
  booktitle    = {{IRZ: Zeitschrift für Internationale Rechnungslegung}},
  issn         = {{1862-5533}},
  number       = {{2}},
  pages        = {{63--73}},
  publisher    = {{C.H.Beck}},
  title        = {{{Die Konsultationsentwürfe der Nachhaltigkeitsberichterstattungsstandards (E-ESRS) der EFRAG – Eine Analyse der im Konsultationsverfahren geäußerten Kritikpunkte}}},
  year         = {{2023}},
}

@misc{9432,
  author       = {{Krai, Alina}},
  pages        = {{46}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Konzeption und Gestaltung eines Kundenmagazins für das Unternehmen Georgia Ramon}}},
  year         = {{2023}},
}

@misc{9435,
  author       = {{Schmitt, Nikola}},
  pages        = {{64}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Konzeption und Gestaltung eines interaktiven Lehrpfades im Wildpark Neuhaus.}}},
  year         = {{2023}},
}

@misc{9452,
  abstract     = {{Best Bad Friends ist ein soziales Kartenspiel, welches für Freundesgruppen entwickelt wurde, die sich untereinander bereits kennen. Das Spiel soll ein Bewusstsein dafür schaffen, was der Rest der Gruppe von den Spieler:innen denkt, und dabei soll so wenig Rücksicht wie möglich auf Tabuthemen genommen werden, um Verletzlichkeit zeigen zu können und sich tiefgehend besser kennenlernen zu können.Faktoren, die den Spielverlauf einer Person beeinflussen können, sind Gier und Zurücknahme. Auch ein guter Bluff und das erfolgreiche Austricksen der Mitspieler:innen kann den Spielverlauf einer Person erfolgreicher gestalten.}},
  author       = {{Pris, Martin}},
  keywords     = {{Kartenspiel, Grafikdesign, Gestaltung, Konzeption, Entwicklung}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Gestaltung eines Kartenspiels mit Berücksichtigung von Einflüssen der Designelemente auf das Spielverhalten}}},
  year         = {{2023}},
}

@misc{9455,
  author       = {{Schulze, Tim}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Aerial Camera Flying Cinematography Manual für Luftaufnahmen am Beispiel von Tandemsprüngen}}},
  year         = {{2023}},
}

@misc{9460,
  author       = {{Habighorst, Malte}},
  pages        = {{48}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe }},
  title        = {{{Welchen Einfluss haben Virtual Production Techniken auf den Workflow in Animationsfilmen jetzt und in der Zukunft?}}},
  year         = {{2023}},
}

@misc{9491,
  author       = {{Albertsmeyer, Marvin}},
  pages        = {{46}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Formen des Zusammenspiels : Mode und Film im Fashion Film}}},
  year         = {{2023}},
}

@misc{9494,
  author       = {{Homic, Angelina}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Konzeptionierung und Umsetzung eines Corporate Designs für "pro cure" im Hinblick auf nachhaltige Verpackungsalternativen.}}},
  year         = {{2023}},
}

@misc{9496,
  author       = {{Warthemann, Lars}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Augmented Reality und die Umsetzung von Werbung in Verbindung mit neuen Medien}}},
  year         = {{2023}},
}

@misc{9503,
  abstract     = {{Ein Webprojekt mit der Fragestellung "Was ist Ästhetik? Und Warum?". }},
  author       = {{Berjaminski, Christian}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Alternative Ausdrucksformen und ihr Potenzial}}},
  year         = {{2023}},
}

@misc{9505,
  author       = {{Köhler, Martin and Burgetsmeier, Bernd}},
  booktitle    = {{Straße + Autobahn }},
  issn         = {{0039-2162}},
  number       = {{2}},
  pages        = {{95--103}},
  publisher    = {{Kirschbaum Verlag}},
  title        = {{{Planung und Herstellung von Randeinfassungen und Entwässerungsrinnen – das neue Merkblatt M RR}}},
  doi          = {{10.53184/STA2-2023-1}},
  volume       = {{74}},
  year         = {{2023}},
}

@misc{9557,
  author       = {{Kochs, Leonie}},
  pages        = {{41}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe }},
  title        = {{{Untersuchungen zum Narrativ in russischen Staatsmedien am Beispiel RT}}},
  year         = {{2023}},
}

@misc{9564,
  author       = {{Prüßmeier, Dennis}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{Virtual Production für Animationsfilme in der Unreal Engine}}},
  year         = {{2023}},
}

@misc{9570,
  abstract     = {{Diese Arbeit untersucht mit Hilfe von Literaturanalyse und Befragungen (Umfrage und Interviews) die Gründe, aus denen Menschen im digitalen Zeitalter noch zu analogen Kameras greifen. Besonderer Fokus wird auf die Verbindung zwischen dem Werkzeug Kamera und dem Mensch gelegt und wie sich diese Verbindung auf den kreativen Prozess beim Fotografieren auswirkt. }},
  author       = {{Stief, Aisha}},
  keywords     = {{Fotografie, analoge Fotografie, digitale Fotografie, analog, Digitalisierung, Umfrage, Befragung, Interview, kreative Prozesse, Kamera, analoge Kamera, digitale Kamera, Nostalgie}},
  pages        = {{64}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Analoge Fotografie in digitalen Zeiten - Warum noch Film belichten?}}},
  year         = {{2023}},
}

@misc{9572,
  abstract     = {{Die Project Task Force on European Sustainability Reporting Standards der European Financial Reporting Advisory Group (EFRAG) hat der interessierten Öffentlichkeit im April 2022 dreizehn Konsultationsentwürfe zur Nachhaltigkeitsberichterstattung zur Verfügung gestellt. Im vorangehenden Teil des Beitrags in IRZ 2/2023 wurden die von in Deutschland ansässigen Interessengruppen abge­gebenen Stellungnahmen zu den Konsultationsentwürfen analysiert. Die dabei geäußerte Kritik machte einen erheblichen Änderungsbedarf deutlich. In dem vorliegenden Beitrag wird nun der Frage­stellung nachgegangen, ob und inwiefern die im Rahmen der Konsultation geäußerten Kritikpunkte Eingang in das erste Set an ESRS-Entwürfen gefunden haben.}},
  author       = {{Pasch, Lilia and Stawinoga, Martin}},
  booktitle    = {{IRZ: Zeitschrift für Internationale Rechnungslegung}},
  issn         = {{2943-2588}},
  number       = {{3}},
  pages        = {{123--128}},
  publisher    = {{C.H.Beck}},
  title        = {{{Die finalen Entwürfe der Nachhaltigkeitsberichterstattungsstandards (E-ESRS) der EFRAG – Eine Analyse der Berücksichtigung der im Konsultationsverfahren geäußerten Kritikpunkte}}},
  year         = {{2023}},
}

@misc{9594,
  author       = {{Pilgrim, Jan}},
  pages        = {{57}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Dialog als Chance für den gemeinsamen Umgang – Eine Untersuchung und praktische Umsetzung von Dialogformaten in den Medien}}},
  year         = {{2023}},
}

@misc{9596,
  author       = {{Gavrilov, Sergej}},
  pages        = {{52}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Corporate Design Entwicklung – Untersuchung von Gestaltungsmöglichkeiten mit Künstlicher Intelligenz}}},
  year         = {{2023}},
}

@misc{9601,
  author       = {{Köhler, Martin}},
  booktitle    = {{Gesteinstagung 2023 der Forschungsgesellschaft für Straßen- und Verkehrswesen am 09./10. März 2023 in Erfurt}},
  isbn         = {{978-3-86446-359-4}},
  location     = {{Erfurt}},
  publisher    = {{FGSV Verlag}},
  title        = {{{Das neue Merkblatt für Randeinfassungen und Entwässerungsrinnen}}},
  year         = {{2023}},
}

@misc{9602,
  author       = {{Köhler, Martin}},
  booktitle    = {{Seminar	"Stadtstraßen / Ortsdurchfahrten  - Vorbereiten – Bauen – Erhalten – Betreiben – Organisieren"}},
  location     = {{Hildesheim}},
  publisher    = {{Eigenverlag VSVI Niedersachsen}},
  title        = {{{Neuigkeiten zur Bauliche Erhaltung von Pflasterdecken und Plattenbelägen}}},
  year         = {{2023}},
}

@misc{9603,
  author       = {{Köhler, Martin and Burgetsmeier, Bernd}},
  booktitle    = {{Kolloquium Kommunales Verkehrswesen 2023}},
  isbn         = {{978-3-86446-357-0}},
  location     = {{Kassel}},
  publisher    = {{FGSV Verlag}},
  title        = {{{Neuerungen zur baulichen Erhaltung von Flächenbefestigungen mit Pflaster, Platten oder Großformaten}}},
  year         = {{2023}},
}

@misc{9616,
  author       = {{Obermann, Anika}},
  pages        = {{56}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Kneipenklatsch Konzeption, Gestaltung und Realisierung eines Buches zum Thema Kneipen in Bielefeld}}},
  year         = {{2023}},
}

@misc{9625,
  author       = {{Stawinoga, Martin}},
  booktitle    = {{Betriebswirtschaftliche Forschung und Praxis : BFuP }},
  issn         = {{0340-5370}},
  number       = {{1}},
  pages        = {{146--147}},
  publisher    = {{NWB-Verl. }},
  title        = {{{Corporate Social Responsibility – Die nichtfinanzielle Erklärung nach §§ 289b ff. HGB und ihre Auswirkungen auf die Aktiengesellschaft, von: Friebel, L.-M., Duncker & Humblot, Berlin 2021}}},
  year         = {{2023}},
}

@misc{9627,
  author       = {{Ramm, Selina and Fulek, Ruwen and Eberle, Veronika Anna and Kiera, Christian and Odefey, Ulrich and Pein-Hackelbusch, Miriam}},
  location     = {{Rosenberg}},
  title        = {{{Compression Density as an Alternative to Identify an Optimal Moisture Content for High Shear Wet Granulation as an Initial Step for Spheronisation}}},
  year         = {{2023}},
}

@misc{9670,
  abstract     = {{This study attempts to replicate experimental results from Chowdhury et al. published in SouthernEconomic Journal (2017).  They study gender differences in the giving and taking variants of thedictator game.  Using the same experimental design on a sample of German students our findingsdiffer from Chowdhury et al.  (2017).  In contrast to the original study, we do not find support foran asymmetric gender effect. Our results indicate that, on average, both men and women allocatesimilar amounts in the giving and in the taking frame.  Additional analyses indicate that men aremore likely than women to allocate nothing in the taking variant rather than in the giving variant,in line with Chowdhury et al. (2017)}},
  author       = {{von Blanckenburg, Korbinian and Tebbe, Eva and Iseke, Anja}},
  booktitle    = {{Journal of Comments and Replications in Economics}},
  issn         = {{2749-988X }},
  number       = {{2}},
  publisher    = {{ZBW - Leibniz Information Centre for Economics }},
  title        = {{{Giving and taking in dictator games – differences by gender? : A replication study of Chowdhury et al. (Southern Economic Journal, 2017)}}},
  doi          = {{ http://dx.doi.org/10.15456/j1.2021138.1037237398}},
  year         = {{2023}},
}

@misc{9671,
  abstract     = {{Die Erfindung betrifft einen Montagearbeitsplatz für die manuelle Montage von Baugruppen aus einer Mehrzahl von Bauteilen mit einer Arbeitsfläche, auf der die Bauteile montierbar sind, und mit einer Mehrzahl von jeweils eine Anzahl von Bauteilen aufnehmenden Behältern, die nebeneinander und/oder übereinander verteilt in einem Bauteilespeicher angeordnet sind, wobei der Bauteilespeicher als eine Regaleinrichtung ausgebildet ist, die mehrere Regalebenen aufweist, die in vertikaler Richtung übereinander angeordnet sind, wobei die Regalebenen jeweils eine Mehrzahl von in Reihen angeordneten Regalplätzen zur Aufnahme jeweils eines Behälters aufweisen, dass die Regaleinrichtung hinter der Arbeitsfläche angeordnet ist, dass eine Bauteile-Nachfüllstelle an eine auf einer der Arbeitsfläche nicht zugewandten Rückseite und/oder Nebenseite der Regaleinrichtung zum Befüllen der Behälter mit Bauteilen angeordnet ist, dass eine Bauteile-Entnahmestelle an einer der Arbeitsfläche zugewandten Vorderseite der Regaleinrichtung zum Entnehmen der Bauteile aus dem Behälter angeordnet ist, dass eine Transporteinrichtung zum Transportieren der Behälter von dem Regalplatz bzw. der Bauteile-Nachfüllstelle zu der Bauteile-Entnahmestelle vorgesehen ist, dass eine Bauteile-Montagesteuereinrichtung vorgesehen ist enthaltend eine Transportansteuerung, mittels derer die Transporteinrichtung derart angesteuert wird, dass die Bauteile enthaltenen Behälter montageschrittabhängig an der Bauteile-Entnahmestelle bereitgestellt werden, und eine Lagerverwaltung, mittels derer die Regalplätze innerhalb der Regaleinrichtung verwaltet werden, und eine Montageanweisungsanzeige, mittels derer eine Montageinformation und/oder der das für den nächsten Montageschritt vorgesehene Behälter optisch angezeigt wird.}},
  author       = {{Hinrichsen, Sven and Meyer, Frederic and Nikolenko, Alexander}},
  pages        = {{33}},
  title        = {{{Montagearbeitsplatz sowie Montageverfahren}}},
  year         = {{2023}},
}

@misc{9691,
  author       = {{Clauß, Marcel}},
  pages        = {{41}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{digitale Farbreproduktion - Color-Management Workflow in digitaler Filmproduktion}}},
  year         = {{2023}},
}

@misc{9694,
  author       = {{Wittlif, Jessica}},
  pages        = {{65}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Konzeption und Gestaltung eines Corporate  Designs für die Abteilung „Detmold lebt“}}},
  year         = {{2023}},
}

@misc{9697,
  abstract     = {{Continuous processes offer more environmentally friendlier beer production compared to the batch production. However, the continuous production of mashing has not become state-of-the-art in the brewing industry. The controllability and flexibility of this process still has hurdles for practical implementation, but which are necessary to react to changing raw materials. Once overcome, a continuous mashing can be efficiently adapted to the raw materials. Both mean residence time and temperature were investigated as key parameters to influence the extract and fermentable sugar content of the wort. The continuous mashing process was implemented as continuous stirred tank reactor (CSTR) cascade consisting of mashing in (20°C), protein rest (50°C), β-amylase rest (62-64°C), saccharification rest (72°C) and mashing out (78°C). Two different temperature settings for the β-amylase rest were investigated with particular emphasis on fermentable sugars. Analysis of Variance (ANOVA) and a post-hoc analysis showed that the mean residence time and temperature settings were suitable control parameters for the fermentable sugars. In the experimental conditions, the most pronounced effect was with the β-amylase rest. These results broaden the understanding of heterogenous CSTR mashing systems about assembly and selection of process parameters}},
  author       = {{Wefing, Patrick and Trilling, Marc and Gossen, Arthur and Neubauer, Peter and Schneider, Jan}},
  booktitle    = {{Journal of The Institute of Brewing}},
  keywords     = {{ontinuous mashing, continuous stirred tank reactor, mean residence time, fermentable sugar}},
  number       = {{1}},
  pages        = {{1--23}},
  publisher    = {{Wiley}},
  title        = {{{A continuous mashing plant controlled by mean residence time}}},
  doi          = {{10.58430/jib.v129i1.7}},
  volume       = {{129}},
  year         = {{2023}},
}

@misc{9885,
  author       = {{Koch, Nathalie}},
  pages        = {{56}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Die Darstellung von Träumen mithilfe von Augmented Reality}}},
  year         = {{2023}},
}

@misc{9888,
  author       = {{Nickel, Bianca}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Konzeption, Gestaltung und Realisation eines Corporate Designs unter Einsatz von Creative Coding zum Thema "Wachstum"}}},
  year         = {{2023}},
}

@misc{9890,
  author       = {{Stawinoga, Martin}},
  booktitle    = {{IRZ: Zeitschrift für Internationale Rechnungslegung}},
  number       = {{5}},
  pages        = {{209--210}},
  publisher    = {{C.H.Beck}},
  title        = {{{10 (persönliche) Fragen an Prof. Dr. Martin Stawinoga}}},
  year         = {{2023}},
}

@inbook{9895,
  abstract     = {{Auch noch Jahrzehnte nach dem Leitbild der Stadt der kurzen Wege zeigt ein Blick von oben auf die deutschen Städte und in unsere Planungswerkzeuge, etwa die Baunutzungsverordnung, immer noch im Wesentlichen das Bild einer sortierten Stadt. Die Stadt der kurzen Wege, als Gegenbewegung zur autogerechten Stadt, setzte in den 1980er Jahren ein und verfolgt im Kern ein diametral entgegengesetztes Ziel – die fußläufige Stadt. Doch auch fast vierzig Jahre später zeigt sich in den meisten Stadtteilen, Wohnsiedlungen und Schlafdörfern noch ein ernüchterndes monofunktionales Bild.}},
  author       = {{Cardinali, Marcel}},
  booktitle    = {{(Re-) Konstruktion von lokaler Urbanität}},
  editor       = {{ Bukow, Wolf-Dietrich and Rolshoven, Johanna and Yildiz, Erol }},
  isbn         = {{978-3-658-39634-3}},
  keywords     = {{Quartier der kurzen Wege, Ökologische Perspektive, Sustainable Development, Rückeroberung des öffentlichen Raums, Funktionsgetrennte Stadt, Informeller Lernraum, Entschichtetes Leben, Quartier von übermorgen  :   Resilienz}},
  pages        = {{145--160}},
  publisher    = {{Springer Fachmedien Wiesbaden}},
  title        = {{{Quartier der kurzen Wege. Die Stadt von vorgestern als Quartier von übermorgen}}},
  doi          = {{10.1007/978-3-658-39635-0_8}},
  year         = {{2023}},
}

@misc{9896,
  author       = {{Reineke, Lutz}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Determination aktueller Musik- und Vermarktungstrends in Zusammenhang mit der Aufarbeitung des persönlichen Flaggschiff-Projekts Musikalbum}}},
  year         = {{2023}},
}

@misc{9902,
  abstract     = {{Diese Bachelorarbeit behandelt die praktische Umsetzung eines Arcade-inspirierten Videospiels mit der Game-Engine Unity. Der praktische Teil der Arbeit bildet den Hauptteil und wird in diesem Dokument durch eine Literaturarbeit theoretisch begleitet. Es werden grundlegende Prinzipien und Konzepte des Game-Designs behandelt und in das praktische Projekt überführt.  
Beginnend mit der Spieleidee, über die Konzeption bis hin zur Implementierung, findet sowohl eine praktische als auch eine theoretische Auseinandersetzung mit dem Thema Game-Design im Arcade-Game Genre, anhand eines praktischen Projektes statt. Begleitet von etablierter Literatur zu dem Thema, bezieht sich diese Arbeit insbesondere auf die Eigenheiten des Arcade-Game Genres und nimmt Bezug auf dessen Entstehungs- und Erfolgsgeschichte. Ziel ist es, fundiertes Wissen aus der Games Branche zu recherchieren, strukturieren und letztendlich praktisch anzuwenden. Mit dieser Vorgehensweise soll geklärt werden, was Arcade-Games im Kern ausmacht, woraus sie bestehen, was sie so beliebt macht und wie sie entstehen. Der praktische Teil der Arbeit basiert auf der theoretischen Auseinandersetzung und wird in diesem Dokument ausführlich beschrieben und dokumentiert. Zum Ende dieser Bachelorarbeit steht ein eigens erstelltes, vollständiges Videospiel, welches sich an den Charakteristiken des Arcade-Game Genres orientiert und eine schriftliche Ausarbeitung, welche dessen Entstehungsprozess, bezugnehmend auf bestehende Literatur dokumentiert. 
}},
  author       = {{Knof, Fabian}},
  keywords     = {{Arcade, Games, Videospiel, Game-Design, Unity}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Entwicklung eines Arcade-inspirierten 2D Videospiels mit Unity}}},
  year         = {{2023}},
}

@misc{9908,
  author       = {{Herzog, Julius}},
  pages        = {{49}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Von der Schwierigkeit des Ankommens - Der Ästhetische Kapitalismus und die Singularisierung der Gesellschaft in den Darstellungsformen Werbung und Kurzfilm}}},
  year         = {{2023}},
}

@misc{9912,
  author       = {{Krauledat, Timon}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{EINE MAYSTERHAFTE DOKUMENTATION}}},
  year         = {{2023}},
}

@misc{9930,
  author       = {{Lange-Hegermann, Markus and Schmohl, Tobias and Watanabe, Alice and Schelling, Kathrin and Heiss, Stefan and Rubart, Jessica}},
  booktitle    = {{Künstliche Intelligenz in der Hochschulbildung: Chancen und Grenzen des KI-gestützten Lernens und Lehrens}},
  editor       = {{Schmohl, Tobias and Watanabe, Alice and Schelling, Kathrin}},
  isbn         = {{978-3-8376-5769-2}},
  pages        = {{161--172}},
  publisher    = {{transcript Verlag}},
  title        = {{{KI-basierte Erstellung individualisierter Mathematikaufgaben für MINT-Fächer}}},
  doi          = {{10.14361/9783839457696-009}},
  volume       = {{4}},
  year         = {{2023}},
}

@inbook{9931,
  author       = {{Steinmann, Barbara}},
  booktitle    = {{Encyclopedia of Business and Professional Ethics}},
  editor       = {{Poff, Deborah C. and Michalos, Alex C.}},
  isbn         = {{978-3-030-22765-4}},
  pages        = {{1780–1785}},
  publisher    = {{Springer International Publishing}},
  title        = {{{Transformational Leadership and Goal Setting}}},
  doi          = {{https://doi.org/10.1007/978-3-030-22767-8_1326}},
  year         = {{2023}},
}

@inbook{9932,
  author       = {{Steinmann, Barbara}},
  booktitle    = {{Encyclopedia of Business and Professional Ethics}},
  editor       = {{Poff, Deborah C. and Michalos, Alex C.}},
  isbn         = {{978-3-030-22765-4}},
  pages        = {{1231–1234}},
  publisher    = {{Springer International Publishing}},
  title        = {{{Leadership Motives or Intentions}}},
  doi          = {{10.1007/978-3-030-22767-8_58}},
  year         = {{2023}},
}

@inbook{9933,
  author       = {{Steinmann, Barbara}},
  booktitle    = {{Encyclopedia of Business and Professional Ethics}},
  editor       = {{Poff, Deborah C. and Michalos, Alex C.}},
  isbn         = {{978-3-030-22765-4}},
  pages        = {{1514–1520}},
  publisher    = {{Springer International Publishing}},
  title        = {{{Pseudo-transformational Leadership}}},
  doi          = {{https://doi.org/10.1007/978-3-030-22767-8_204}},
  year         = {{2023}},
}

@misc{9935,
  author       = {{Zblewski, Louisa}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{Eine Untersuchung der visuellen  Aufmerksamkeit  in Open World Videospielen anhand  des Environment Game Designs}}},
  year         = {{2023}},
}

@book{9984,
  editor       = {{Schmohl, Tobias and Watanabe, Alice and Schelling, Kathrin}},
  isbn         = {{978-3-8376-5769-2}},
  pages        = {{ 286}},
  publisher    = {{transcript Verlag}},
  title        = {{{Künstliche Intelligenz in der Hochschulbildung : Chancen und Grenzen des KI-gestützten Lernens und Lehrens }}},
  volume       = {{4}},
  year         = {{2023}},
}

@misc{9988,
  author       = {{Schmitz, Yannick Andre}},
  pages        = {{95}},
  publisher    = {{Technischen Hochschule Ostwestfahlen-Lippe}},
  title        = {{{Konzeption und Implementierung einer interaktiven Datenvisualisierung zur Recherche von  musikalischen Rekonstruktionen }}},
  year         = {{2023}},
}

@misc{9993,
  author       = {{Junker, Kira}},
  keywords     = {{Typografie, Design Thinking, Handbuch}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Typografie in der Medienproduktion: Konzeption und Gestaltung eines Handbuches zu den Grundlagen der Typografie mit Methoden des Design Thinking}}},
  year         = {{2023}},
}