@misc{11256,
  abstract     = {{Die vorliegende Arbeit befasst sich mit der konkreten Frage nach dem Einfluss von Video on
Demand-Diensten (im weiteren Verlauf der Arbeit entsprechend mit VoD abgekürzt), wie
beispielsweise „Netflix“ oder „Amazon Prime Video“, auf die traditionelle Kinokultur.
Um diese Leitfrage beantworten zu können, wird sie in einzelne Bereiche. Hierfür werden folgende
weitere Fragestellungen behandelt:
1. Beeinflusst die Art, bzw. der Typ eines Kinos die jeweilige Besucheranzahl?
2. Wirkt sich eine, seitens der VoD-Dienste angestrebte, Verkürzung der sog.
„Auswertungskette“ negativ auf den (deutschen) Kinomarkt aus?
3. Beeinflusst Binge-Watching die Attraktivität eines Kinobesuches und den damit
einhergehenden Filmkonsum?
Neben einer literaturbasierten Recherche wurde zur Beantwortung dieser Leitfragen auch eine
Online-Umfrage durchgeführt, welche hauptsächlich quantitative Forschungsmethoden
verwendete, um eine mögliche Trendentwicklung zu beobachten.
Durch die geringe Teilnehmerquote (n = 56) aber auch die ungleiche Verteilung der einzelnen
Altersgruppen, wurden die Ergebnisse dieser Umfrage nicht als absoluter Beleg oder Widerlegung
von einzelnen Fragen verwendet. Lediglich die Ableitung möglicher Trendentwicklungen konnte
in diesem Fall vorgenommen werden.}},
  author       = {{Linß, Eric}},
  keywords     = {{Kino, Video on Demand}},
  pages        = {{89}},
  publisher    = {{Technische Hochschule Ost-Westfalen Lippe}},
  title        = {{{Der Einfluss von Video on Demand Diensten auf die Kinokultur}}},
  year         = {{2024}},
}

@misc{11258,
  author       = {{Büker, Denise}},
  keywords     = {{Editorial Design, Print}},
  pages        = {{112}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Geschichte des Editorial Designs}}},
  year         = {{2024}},
}

@misc{11264,
  author       = {{Faupel, Christian and Neumann, Philipp}},
  booktitle    = {{WISU - Das Wirtschaftsstudium}},
  issn         = {{0340-3084}},
  number       = {{1}},
  pages        = {{66}},
  publisher    = {{Lange}},
  title        = {{{Bewertung von Vorratsvermögen}}},
  volume       = {{53}},
  year         = {{2024}},
}

@book{11267,
  author       = {{Faupel, Christian and Neumann, Philipp}},
  pages        = {{264}},
  publisher    = {{tredition}},
  title        = {{{Betriebliche Kosten- und Leistungsrechnung : vorlesungsbegleitendes Lehrbuch}}},
  year         = {{2024}},
}

@misc{11283,
  abstract     = {{Introduction: In recent decades, there has been a rise in mental illnesses. Community infrastructures are increasingly acknowledged as important for sustaining good mental health. Moreover, green spaces are anticipated to offer advantages for both mental health and social cohesion. However, the mediating pathway between green space, social cohesion and mental health and especially the proximity and characteristics of green spaces that trigger these potential effects remain of interest. Methods: We gathered data from 1365 individuals on self-reported social cohesion and mental health across four satellite districts in European cities: Nantes (France), Porto (Portugal), Sofia (Bulgaria), and Hoje-Taastrup (Denmark). Green space data from OpenStreetMap was manually adjusted using the PRIGSHARE guidelines. We used the AID-PRIGSHARE tool to generate 7 indicators about green space characteristics measured in distances from 100-1500 m, every 100 m. This resulted in 105 different green space variables that we tested in a single mediation model with structural equation modelling. Results: Accessible greenness (900-1400 m), accessible green spaces (900-1500 m), accessible green space corridors (300-800 m), accessible total green space (300-800), and mix of green space uses (700-1100 m) were significantly associated with social cohesion and indirectly with mental health. Green corridors also showed negative indirect and direct associations with mental health in larger distances. Surrounding greenness and the quantity of green space uses were not associated with social cohesion nor indirectly with mental health. We also observed no positive direct associations between any green space variable in any distance to mental health. Conclusions: Our results suggest that accessibility, connectivity, mix of use and proximity are key characteristics that drive the relationship between green spaces, social cohesion and mental health. This gives further guidance to urban planners and decision-makers on how to design urban green spaces to foster social cohesion and improve mental health.}},
  author       = {{Cardinali, Marcel and Beenackers, Mariëlle A. and Fleury-Bahi, Ghozlane and Bodénan, Philippe and Petrova, Milena Tasheva and van Timmeren, Arjan and Pottgiesser, Uta}},
  booktitle    = {{  Urban forestry & urban greening}},
  issn         = {{1610-8167}},
  keywords     = {{Soil Science, Ecology, Forestry, Green space, Mediation, Social cohesion, Well-being, Structural equation modelling}},
  publisher    = {{Elsevier BV}},
  title        = {{{Examining green space characteristics for social cohesion and mental health outcomes: A sensitivity analysis in four European cities}}},
  doi          = {{10.1016/j.ufug.2024.128230}},
  volume       = {{93}},
  year         = {{2024}},
}

@misc{11286,
  abstract     = {{This paper provides insight of additive manufacturing of spiral shaped waveguides using suitable low loss polymer materials and their THz characterization for the frequency range of 0.1 THz to 0.6 THz. The spiral shaped waveguides are evaluated for material losses as well as in-and outcoupling losses with respect to the increasing length of the waveguides.}},
  author       = {{Shrotri, Abhijeet Narendra and Mukherjee, Amlan k. and Stübbe, Oliver and Preu, Sascha}},
  booktitle    = {{2023 IEEE 11th Asia-Pacific Conference on Antennas and Propagation (APCAP)}},
  isbn         = {{979-8-3503-2627-7}},
  location     = {{Guangzhou, China }},
  publisher    = {{IEEE}},
  title        = {{{THz-Characterization of Additively Manufactured Spiral Shaped Waveguides}}},
  doi          = {{10.1109/apcap59480.2023.10469842}},
  year         = {{2024}},
}

@misc{11295,
  author       = {{Sahabi, Mina}},
  pages        = {{104}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Zwischen Papier und Pixel: Art Books als Brücke zwischen kreativem Prozess und Spielerlebnis}}},
  year         = {{2024}},
}

@misc{11311,
  abstract     = {{Ausgefahrene Bankette sind infolge der damit verbundenen Stufenbildung am Fahrbahnrand eine der wesentlichen Ursachen von Gegenverkehrs- und Abkommensunfällen auf einbahni-gen Landstraßen. Durch die Anordnung von Bankettbefestigungen, hergestellt mit Befesti-gungselementen aus Beton oder Naturstein, kann ein Ausfahren des Banketts weitgehend vermieden werden. Das neu erschienene "Merkblatt für Bankettbefestigungen mit vorgefertig-ten Befestigungselementen (M BB)" beinhaltet zahlreiche Hinweise für die Planung und Aus-führung derartiger Bankettbefestigungen. Diese sollten sich in Farbe und Profilierung der Ober-fläche deutlich von der Fahrbahn unterscheiden. Das Straßenoberflächenwasser sollte weitge-hend über sie hinweg und auf das benachbarte unbefestigte Bankett geleitet werden. Bankett-befestigungen werden entweder in ungebundener Ausführung mit einer ungebundenen Bet-tung und einer Stützkeilschüttung oder in gebundener Ausführung mit einem Betonfundament und einer Rückenstütze hergestellt.}},
  author       = {{Köhler, Martin and Ulonska, Dietmar}},
  booktitle    = {{Straße + Autobahn}},
  issn         = {{0039-2162}},
  number       = {{5}},
  pages        = {{409--414}},
  publisher    = {{Kirschbaum Verlag}},
  title        = {{{Das neue Merkblatt für Bankettbefestigungen mit vorgefertigten Befestigungselementen - M BB}}},
  doi          = {{doi.org/10.53184/STA5-2024-2}},
  volume       = {{75}},
  year         = {{2024}},
}

@misc{11323,
  author       = {{Kirk, Rhona}},
  keywords     = {{YouTube Kids, YouTube, Social Media, Video-on-Demand, Medien, Kinder, Kindermedien, Google}},
  pages        = {{40}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Die Internetplattform YouTube Kids: Entstehung, Inhalte und Nutzerverhalten von Kindern}}},
  year         = {{2024}},
}

@misc{11326,
  author       = {{Rüter, Luisa}},
  pages        = {{124}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Psychologie des Gebens - Optimierung der Kommunikationsstrategie des Vereins TanZanEye e.V.}}},
  year         = {{2024}},
}

@misc{11329,
  author       = {{Krysztofiak, Stella-Lynn and Klein, Robin}},
  pages        = {{150}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{INQUIRING IDENTITY - EINE INSTALLATIVE INTERPRETATION DES IDENTITÄTSBEGRIFFS}}},
  year         = {{2024}},
}

@misc{11330,
  abstract     = {{With the increasing complexity in manual assembly and a demographic decline in skilled workforce, the importance of well-documented processes through assembly instructions has grown. Creating these instructions is a time-consuming and knowledge-intensive task that typically relies on experienced employees. Although various automation solutions have been proposed to assist in generating assembly instructions, they often fall short in providing detailed textual guidance. With the rise of generative artificial intelligence (AI), new potentials arise in this domain. Therefore, this paper explores these potentials by employing various large language models (LLMs), prompting techniques and input data in an experimental setup for generating detailed assembly instructions, including the planning of assembly sequences as well as textual guidance on tools, assembly activities, and quality assurance measures. The findings reveal promising opportunities in leveraging LLMs but also substantial challenges, particularly in assembly sequence planning. To improve the reliability of generating assembly instructions, we propose a multi-agent concept that decomposes the complex task into simpler subtasks, each managed by specialized agents.}},
  author       = {{Meyer, Frederic and Freitag, Lennart and Hinrichsen, Sven and Niggemann, Oliver}},
  booktitle    = {{2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA)}},
  isbn         = {{979-8-3503-6123-0}},
  keywords     = {{assembly instruction, GPT, large language model, LLM, prompt}},
  location     = {{Padova, Italy}},
  publisher    = {{IEEE}},
  title        = {{{Potentials of Large Language Models for Generating Assembly Instructions}}},
  doi          = {{https://doi.org/10.1109/ETFA61755.2024.10710806}},
  volume       = {{78}},
  year         = {{2024}},
}

@misc{11335,
  author       = {{Geule, Marie}},
  pages        = {{90}},
  publisher    = {{TH OWL}},
  title        = {{{Der Einfluss des Verpackungsdesigns auf die Kaufentscheidung: Eine Untersuchung am Beispiel von Hafermilch.}}},
  year         = {{2024}},
}

@misc{11338,
  author       = {{Harder, Katharina}},
  pages        = {{37}},
  publisher    = {{Technische Hochschule OWL}},
  title        = {{{Augmented Reality – Print der Zukunft}}},
  year         = {{2024}},
}

@misc{11370,
  author       = {{Zurheide, Julia-Laureen}},
  pages        = {{48}},
  publisher    = {{Technische Hochschue OWL}},
  title        = {{{Nutzung von Social Media in der Werbebranche - Analysen und Maßnahmen zur Steigerung von Interaktivität am Praxisbeispiel der Brandstifter AG}}},
  year         = {{2024}},
}

@inbook{11373,
  abstract     = {{The topic of Product Lifecycle Management (PLM) should be nowadays part of any engineering degree course in every university worldwide. In an increasingly digital and connected world, students and prospective engineers need to know the interrelationships of holistic product development. Excellent expertise in a discipline such as mechanical engineering is still necessary, but no longer sufficient. This article explains why this is the case and what universities can do to address this issue. It describes in detail the PLM course of the OWL University of Applied Sciences and Arts located in Lemgo, Germany. In addition, suggestions are made on how to improve the course content, based on many years of experience. As such, this article is a valuable source of information for anyone teaching PLM today or intending to do so in the future.}},
  author       = {{Deuter, Andreas and Otte, Andreas}},
  booktitle    = {{Product Lifecycle Management (Volume 6) : Increasing the Value of PLM with Innovative New Technologies}},
  editor       = {{Stark, John}},
  isbn         = {{978-3-031-53520-8}},
  issn         = {{2197-6589}},
  pages        = {{215--231}},
  publisher    = {{Springer Nature Switzerland}},
  title        = {{{PLM in Engineering Education: Purpose and Challenges}}},
  doi          = {{10.1007/978-3-031-53521-5_14}},
  year         = {{2024}},
}

@misc{11374,
  author       = {{Lambertz, Henning and Riegel, Adrian and Waldmann, Franka}},
  booktitle    = {{Tagungsband des 21. Holztechnischen Kolloquiums Dresden 18.-19. April 2024}},
  editor       = {{Wagenführ, André}},
  isbn         = {{978-3-86780-774-6}},
  keywords     = {{Notunterkunft, Nachhaltigkeit, serielles Bauen}},
  location     = {{Dresden}},
  pages        = {{100--108}},
  publisher    = {{Selbstverlag TU Dresden}},
  title        = {{{Nachhaltige Schutzhütten für Flüchtlinge - Automatisierte Produktion vor Ort}}},
  volume       = {{42}},
  year         = {{2024}},
}

@misc{11375,
  author       = {{Riegel, Adrian and Röllecke, Melwin}},
  booktitle    = {{Tagungsband des 21. Holztechnischen Kolloquiums Dresden 18.-19. April 2024}},
  editor       = {{Wagenführ, André}},
  isbn         = {{978-3-86780-774-6}},
  keywords     = {{Lastenrad, Sperrholz, Auslegung, Do-It-Yourself-Projekt}},
  location     = {{Dresden}},
  pages        = {{127--135}},
  publisher    = {{Selbstverlag TU Dresden}},
  title        = {{{Lastenräder aus Holz - eine ingenieurwissenschaftliche Annäherung}}},
  volume       = {{42}},
  year         = {{2024}},
}

@misc{11386,
  abstract     = {{Klimaschutzräte führen wissenschaftliche, politische und gesellschaftliche Kräfte zusammen, um effektive und evidenzbasierte Maßnahmen zu entwickeln, die dem Klimawandel entgegenwirken. Sie fördern das Bewusstsein, schaffen Konsens und stärken die Legitimität von Klimaschutzmaßnahmen.}},
  author       = {{Grebe, Christina and Kost, Susanne}},
  booktitle    = {{Politische Ökologie}},
  issn         = {{2625-543X}},
  number       = {{1}},
  pages        = {{77--82}},
  publisher    = {{Oekom Publishers GmbH}},
  title        = {{{Mut und Durchhaltevermögen sind gefragt: Klimaziele und politische Veränderungsbereitschaft}}},
  doi          = {{10.14512/poe012024077}},
  volume       = {{176}},
  year         = {{2024}},
}

@misc{11395,
  author       = {{Zube, Alina}},
  keywords     = {{Mediendesign, Konzeption, Gestaltung, Inklusives Kommunikationsdesign}},
  pages        = {{152 / 92}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Konzeptionierung und Gestaltung eines Rescue-Sets zur Stärkung und Begleitung in Angst- und Paniksituationen}}},
  year         = {{2024}},
}

@misc{11399,
  author       = {{Kümmel, Jens and Nordhoff, Daniel}},
  booktitle    = {{Das Wirtschaftsstudium : wisu ; Zeitschrift für Ausbildung, Prüfung, Berufseinstieg und Fortbildung}},
  issn         = {{0340-3084}},
  number       = {{4}},
  pages        = {{347 -- 354}},
  publisher    = {{Lange Verlag GmbH & Co. KG}},
  title        = {{{Supply Chain Finance}}},
  volume       = {{53}},
  year         = {{2024}},
}

@misc{11412,
  abstract     = {{This paper presents a pioneering approach to integrating artistic research into the curriculum of
German universities of applied sciences (UAS). Recognizing the unique challenges and opportunities
presented by artistic disciplines in higher education, we have developed modules for a master's
program that blend epistemological content with the fundamentals of artistic research. This initiative
addresses the current disparity in qualification opportunities for artistic disciplines at the UAS level,
where artistic achievements are legally equated with scientific accomplishments, yet opportunities for
higher qualification in these fields are limited.
Our approach is anchored in the belief that artistic research, a field that challenges traditional research
paradigms by valuing artful knowledge alongside scientific knowledge, deserves a structured and
recognized pathway within the academic system. Drawing from relevant legal texts and documents
that equate artistic and scientific qualifications of personnel, we argue for the integration of artistic
research into the curriculum as a step towards rectifying the existing imbalance and
underrepresentation of artistic disciplines in higher education.
This paper presents a pioneering approach to integrating artistic research into the curriculum of
German universities of applied sciences (UAS). Recognizing the unique challenges and opportunities
presented by artistic disciplines in higher education, we have developed modules for a master's
program that blend epistemological content with the fundamentals of artistic research. This initiative
addresses the current disparity in qualification opportunities for artistic disciplines at the UAS level,
where artistic achievements are legally equated with scientific accomplishments, yet opportunities for
higher qualification in these fields are limited.
Our approach is anchored in the belief that artistic research, a field that challenges traditional research
paradigms by valuing artful knowledge alongside scientific knowledge, deserves a structured and
recognized pathway within the academic system. Drawing from relevant legal texts and documents
that equate artistic and scientific qualifications of personnel, we argue for the integration of artistic
research into the curriculum as a step towards rectifying the existing imbalance and
underrepresentation of artistic disciplines in higher education.
}},
  author       = {{Schmohl, Tobias and Grobler, Sebastian}},
  booktitle    = {{New Perspectives in Science Education}},
  isbn         = {{979-12-80225-58-0}},
  keywords     = {{Artistic Research, Art-Based Research, Curriculum Development, Higher Education, Epistemology}},
  location     = {{Florenz}},
  pages        = {{6}},
  publisher    = {{Filodiritto Editore}},
  title        = {{{Integrating Artistic Research into German University of Applied Sciences Curricula: A New Paradigm in Science Education}}},
  volume       = {{13}},
  year         = {{2024}},
}

@book{11416,
  abstract     = {{This publication aspires to clarify and illustrate the role of higher education in promoting internationalisation, especially Internationalization at Home (IaH). It aims to highlight higher education's three central roles: teaching, research, and community service, each in its global context. The anthology actively promotes change and development in the higher education sector and identifies strategies like online learning platforms and community partnerships that make higher education more accessible and enhance its benefits. The publication comprises two interconnected sections: the first addresses the evolving classroom dynamics due to IaH, focusing on curriculum adaptations for a varied student body. The second section delves into educational goals, emphasizing an international perspective. Targeted at educators and researchers, the anthology offers guidance on integrating international and intercultural perspectives into curricula and teaching methods, with a focus on social inclusivity.}},
  editor       = {{Wolf, Birgit and Schmohl, Tobias and Buhin-Krenek, Larisa and Stricker, Michael}},
  isbn         = {{978-3-7639-7568-6}},
  publisher    = {{wbv Publikation}},
  title        = {{{From Splendid Isolation to Global Engagement : Exploring Internationalization in Higher Education}}},
  doi          = {{10.3278/9783763975693}},
  volume       = {{6}},
  year         = {{2024}},
}

@misc{11421,
  author       = {{Reustlen, Stefanie and Stawinoga, Martin}},
  booktitle    = {{WPg : Kompetenz schafft Vertrauen }},
  issn         = {{0340-9031}},
  number       = {{9}},
  pages        = {{476--482}},
  publisher    = {{IdW-Verl.}},
  title        = {{{Zur Fortentwicklung der ökologischen Nachhaltigkeitsberichterstattung mit Biodiversitätsaspekten – Eine kritische Würdigung der aktuellen Rahmenwerke und Standards}}},
  year         = {{2024}},
}

@misc{11429,
  author       = {{Lammersen, Maximilian and Lahl, Joscha and Rasche, Rainer}},
  location     = {{Darmstadt}},
  title        = {{{Digitale Lebenslaufakte mit Distributed Ledger Technologie}}},
  year         = {{2024}},
}

@misc{11432,
  abstract     = {{Currently, numerous single track railway lines are disused due to economic reasons. One way they could be reactivated for bidirectional on demand traffic is by small cabin-like vehicles, lateral stabilized by a system of control moment gyroscopes and a moveable mass. Regarding such a vehicle, there is currently no reference in comparison with other vehicles and no experimental experience or the like. To ensure the functionality and safety of the vehicle even before its realization, a model-based design is carried out for development, analysis, optimization and testing. This paper is focused on the co-simulation of such a vehicle that is controlled by a longitudinal control. In order to take into account the complex interaction between the longitudinal dynamics and the running gear, the entire system must be considered here including the wheel/rail interaction. Co-simulations are performed considering both the mechanical model of the vehicle and the control of the longitudinal dynamics of the overall system. The simulation results show that functionality and safe operation can be ensured by the vehicle longitudinal controls. As a result, the simulation and the measurement of the real system show a good match. By means of HIL and co-simulations, function tests could be shifted to earlier development stages, in order to accelerate the overall development.}},
  author       = {{Hanselle, Raphael and Stork, Dominic and Lück, Sönke and Rasche, Rainer and Naumann, Rolf and Witte, Stefan}},
  booktitle    = {{ Advances in Dynamics of Vehicles on Roads and Tracks III  Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, August 21–25, 2023, Ottawa, Canada - Volume 1: Rail Vehicles}},
  editor       = {{Huang, Wei  and Ahmadian, Mehdi }},
  isbn         = {{978-3-031-66970-5}},
  issn         = {{2195-4364}},
  keywords     = {{field and laboratory testing, autonomous railway vehicles, vehicle control and mechatronics, co-simulation}},
  location     = {{Ottawa, Canada}},
  pages        = {{514--523}},
  publisher    = {{Springer Nature}},
  title        = {{{Simulation of a Longitudinal Control System for an Automated Driving Self-Stabilized Monorail Vehicle}}},
  doi          = {{https://doi.org/10.1007/978-3-031-66971-2_54}},
  year         = {{2024}},
}

@misc{11433,
  author       = {{Balitzki-Ignorek, Fabienne Kristin}},
  keywords     = {{Sportfotografie, Fotografie, Fußball}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Gelungene Sportfotografie - Ein Konzept für eine professionelle Umsetzung}}},
  year         = {{2024}},
}

@misc{11436,
  abstract     = {{Tailored to the students of architecture and interior architecture at the OWL University of Applied Sciences and Arts in Detmold, the project focuses on developing and integrating a digital reflection assistant called “As U know” to complement building physics education.
The reflection assistant is introduced in an application-oriented module and brings together a diverse range of learning resources including sample exercises, glossaries, videos, tests, quizzes and more. Special focus is placed on interactive videos that are intended to support the development of problem-specific solutions for the complex requirements arising from the students' own designs.
Many architecture and interior architecture students struggle with the challenge of harmonizing the learned principles of building physics with their individual creative design processes. As a result, face-to-face correction discussions offered are often used ineffectively or even avoided by students due to insecurity. To counteract this, "As U know" provides students individual support independent of time and location, helping them prepare effectively for correction discussions.
In a survey conducted as part of the project, all users stated that the test version had supported or had rather supported them in applying the required building physics content. Forty six percent reported feeling less or tendentially less inhibited in taking advantage of the face-to-face corrections.}},
  author       = {{von Borstel, Ruth and Schwickert, Susanne}},
  booktitle    = {{International Conference The Future of Education, Edition 14}},
  keywords     = {{digital reflection assistant, blended learning, ndividual support, interactive video}},
  location     = {{Florence}},
  publisher    = {{Filodiritto Publisher}},
  title        = {{{Development and Integration of a Digital Reflection Assistant as a Complement to Building Physics Education}}},
  doi          = {{10.26352/I620_2384-9509}},
  year         = {{2024}},
}

@misc{11438,
  author       = {{von Borstel, Ruth and Schwickert, Susanne}},
  booktitle    = {{„INTEGRATION & KO-KREATION - Miteinander von Mensch und Maschine in Forschung und Bildung“}},
  location     = {{Jena}},
  publisher    = {{Waxmann Verlag}},
  title        = {{{Entwicklung eines digitalen Reflexionsassistenten und Implementierung in die Bauphysiklehre}}},
  year         = {{2024}},
}

@misc{11439,
  abstract     = {{Tailored to the students of architecture and interior architecture at the OWL University of Applied Sciences and Arts in Detmold, the project focuses on developing and integrating a digital reflection assistant called “As U know” to complement building physics education. 
The reflection assistant is introduced in an application-oriented module and brings together a diverse range of learning resources including sample exercises, glossaries, videos, tests, quizzes and more. Special focus is placed on interactive videos that are intended to support the development of problem-specific solutions for the complex requirements arising from the students' own designs.
Many architecture and interior architecture students struggle with the challenge of harmonizing the learned principles of building physics with their individual creative design processes. As a result, face-to-face correction discussions offered are often used ineffectively or even avoided by students due to insecurity. To counteract this, "As U know" provides students individual support independent of time and location, helping them prepare effectively for correction discussions.
In a survey conducted as part of the project, all users stated that the test version had supported or had rather supported them in applying the required building physics content. Forty six percent reported feeling less or tendentially less inhibited in taking advantage of the face-to-face corrections.}},
  author       = {{von Borstel, Ruth and Schwickert, Susanne}},
  booktitle    = {{Future of Education, Web of Science and Scopus}},
  issn         = {{2420-9732}},
  keywords     = {{digital reflection assistant, blended learning, individual support, interactive video}},
  location     = {{Florenz}},
  publisher    = {{Pixel}},
  title        = {{{Development and integration of a digital reflection assistant as a complement to building physics education}}},
  year         = {{2024}},
}

@misc{11488,
  author       = {{Unruh, Selina}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{POV Mallorca : Ein Magazin für die Generation Z - Konzeption und Realisation}}},
  year         = {{2024}},
}

@misc{11492,
  abstract     = {{In this review, we aim to highlight the advantages, challenges, and limitations of electronic tongues (e-tongues) in pharmaceutical drug development. The authors, therefore, critically evaluated the performance of e-tongues regarding their qualification to assess peroral formulations containing bitter active pharmaceutical ingredients. A literature search using the keywords ‘electronic’, ‘tongue’, ‘bitter’, and ‘drug’ in a Web of Science search was therefore initially conducted. Reviewing the publications of the past decade, and further literature where necessary, allowed the authors to discuss whether and how e-tongues perform as expected and whether they have the potential to become a standard tool in drug development. Specifically highlighted are the expectations an e-tongue should meet. Further, a brief insight into the technologies of the utilized e-tongues is given. Reliable protocols were found that enable (i) the qualified performance of e-tongue instruments from an analytical perspective, (ii) proper taste-masking assessments, and (iii) under certain circumstances, the evaluation of bitterness.}},
  author       = {{Steiner, Denise and Meyer, Alexander and Immohr, Isabell and Pein-Hackelbusch, Miriam}},
  booktitle    = {{Pharmaceutics}},
  issn         = {{1999-4923 }},
  keywords     = {{e-tongues, performance, qualification, taste masking, bitterness, dosage forms, drug formulations}},
  number       = {{5}},
  publisher    = {{MDPI}},
  title        = {{{Critical View on the Qualification of Electronic Tongues Regarding Their Performance in the Development of Peroral Drug Formulations with Bitter Ingredients}}},
  doi          = {{10.3390/pharmaceutics16050658}},
  volume       = {{16}},
  year         = {{2024}},
}

@misc{11493,
  abstract     = {{Eine in 2023 in Irland durchgeführte Studie kommt zu dem Ergebnis, dass unter anderem ein schlechter Geschmack von Antibiotika-Zubereitungen zu einer schlechten Compliance bei Kindern führt. Aber wie sehen die Geschmacksmaskierungs­strategien von in Deutschland erhältlichen Antibiotika-­Trockensaftformulierungen aus und zu welchem Zeitpunkt der Arzneimittelentwicklung kann das Thema Geschmack überhaupt adressiert werden?}},
  author       = {{Pein-Hackelbusch, Miriam}},
  booktitle    = {{Deutsche Apotheker Zeitung}},
  issn         = {{0011-9857 }},
  number       = {{14}},
  pages        = {{38--42}},
  publisher    = {{Deutscher Apothekerverlag}},
  title        = {{{Hauptsache süß : Über die Geschmacksmaskierung in Antibiotika-Säften}}},
  volume       = {{164}},
  year         = {{2024}},
}

@misc{11495,
  abstract     = {{To evaluate the suitability of an analytical instrument, essential figures of merit such as the limit of detection (LOD) and the limit of quantification (LOQ) can be employed. However, as the definitions k nown in the literature are mostly applicable to one signal per sample, estimating the LOD for substances with instruments yielding multidimensional results like electronic noses (eNoses) is still challenging. In this paper, we will compare and present different approaches to estimate the LOD for eNoses by employing commonly used multivariate data analysis and regression techniques, including principal component analysis (PCA), principal component regression (PCR), as well as partial least squares regression (PLSR). These methods could subsequently be used to assess the suitability of eNoses to help control and steer processes where volatiles are key process parameters. As a use case, we determined the LODs for key compounds involved in beer maturation, namely acetaldehyde, diacetyl, dimethyl sulfide, ethyl acetate, isobutanol, and 2-phenylethanol, and discussed the suitability of our eNose for that dertermination process. The results of the methods performed demonstrated differences of up to a factor of eight. For diacetyl, the LOD and the LOQ were sufficiently low to suggest potential for monitoring via eNose. }},
  author       = {{Kruse, Julia and Wörner, Julius and Schneider, Jan and Dörksen, Helene and Pein-Hackelbusch, Miriam}},
  booktitle    = {{Sensors}},
  issn         = {{1424-8220 }},
  keywords     = {{multidimensional sensor arrays, MOS sensors, beer fermentation, process control, gas analysis, metal oxide semiconductors, intentional data analysis, chemometrics, PLSR, PCA, first-order calibration}},
  number       = {{11}},
  publisher    = {{MDPI}},
  title        = {{{Methods for Estimating the Detection and Quantification Limits of Key Substances in Beer Maturation with Electronic Noses }}},
  doi          = {{10.3390/s24113520}},
  volume       = {{24}},
  year         = {{2024}},
}

@misc{11498,
  author       = {{Nether, Ulrich and Minge, Michael and Rubart, Jessica and Pieper, Svenja and Tasci, Aylin and Hartmann, Lara and Herrmann, Kristina}},
  keywords     = {{Diversity, Equity, Inclusion, Teaching, University, interdisciplinary}},
  pages        = {{141}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{DiversityLab TH OWL}}},
  year         = {{2024}},
}

@inbook{11500,
  abstract     = {{Nach einer frühen Phase der ersten Annäherung an das Querschnittsthema Digitalisierung, gelingt es nun immer mehr Kommunen, den Anwendungsbezug technologischer Innovationen weiter zu konkretisieren und insbesondere den Nutzen für Menschen, Umwelt und die Erreichung der Nachhaltigkeitsziele stärker zu fokussieren. Die enorme Innovationsgeschwindigkeit digitaler Lösungen läuft aber selten synchron mit der Formulierung kommunal-strategischer Entwicklungsziele. Folglich stellt sich die Frage, wie eine zielgerichtete Verknüpfung zwischen den enormen Anwendungspotenzialen intelligenter Technologien einerseits und den lokal spezifischen Herausforderungen vor Ort andererseits gelingen kann. Im Verlauf des EFRE-geförderten Forschungsprojekts LivingLab Essigfabrik wurden zu dieser Fragestellung mehrere Zugänge erarbeitet und prototypisch getestet. Im Folgenden werden die Werkzeuge vorgestellt und inhaltlich eingeordnet.}},
  author       = {{Häusler, Axel}},
  booktitle    = {{Künstliche Intelligenz im Bauwesen}},
  editor       = {{Haghsheno, Shervin and Satzger, Gerhard and Lauble, Svenja and Vössing, Michael}},
  isbn         = {{978-3-658-42795-5}},
  pages        = {{169–185}},
  publisher    = {{Springer Vieweg, Wiesbaden}},
  title        = {{{KI in der Stadtplanung: Wie finden technologische Innovationen die passenden Probleme?}}},
  doi          = {{10.1007/978-3-658-42796-2_10}},
  year         = {{2024}},
}

@inbook{11501,
  abstract     = {{Kommunikation gilt als Schlüssel, sich der Wahrnehmung von Landschaften zu nähern. In der räumlichen Planung wird Beteiligung, als Mittel angesehen, um mögliche Konflikte frühzeitig zu erkennen, zu lösen oder vorzubeugen. Online-Partizipation bietet in Bezug auf das Thema Landschaft besondere Chancen und Grenzen. Dementsprechend empfiehlt sich auch bei landschaftlichen Themen ein Methoden- und Medienmix, der abgestimmt ist auf den vorhandenen Kontext, das Ziel der Beteiligung und die Planungsphase.}},
  author       = {{Bernstein, Franziska and Kaußen, Lucas and Stemmer, Boris}},
  booktitle    = {{Handbuch Landschaft}},
  editor       = {{Kühne, Olaf and Weber, Florian and Berr, Karsten and Jenal, Corinna}},
  isbn         = {{978-3-658-42135-9}},
  issn         = {{2625-7009}},
  publisher    = {{Springer Fachmedien Wiesbaden}},
  title        = {{{Online-Partizipation und Landschaft}}},
  doi          = {{10.1007/978-3-658-42136-6_63}},
  year         = {{2024}},
}

@misc{11511,
  author       = {{Schneider, Merlin Manfred}},
  pages        = {{112}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Möglichkeiten der Medienproduktion, die sich für Designer durch künstliche Intelligenz eröffnen, am Beispiel eines Designkonzeptes für eine Albumproduktion & dessen Vermarktung}}},
  year         = {{2024}},
}

@misc{11531,
  abstract     = {{Radiobeitrag in der Sendung "Marktplatz" zum Thema "Trotz hoher Zinsen Eigenheim bezahlen – Baufinanzierung"}},
  author       = {{Noosten, Dirk and Jappe, Alrun and Hommel, Christoph and Ehring, Georg}},
  booktitle    = {{Marktplatz}},
  location     = {{Köln}},
  publisher    = {{Deutschlandfunk}},
  title        = {{{Trotz hoher Zinsen Eigenheim bezahlen – Baufinanzierung}}},
  year         = {{2024}},
}

@misc{11533,
  author       = {{Stork, Merle}},
  pages        = {{64}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Filmische Elemente in der Literatur}}},
  year         = {{2024}},
}

@misc{11537,
  author       = {{Katsch, Linda and Trilling-Haasler, Marc and Fahmi, Amir and Pein-Hackelbusch, Miriam and Schneider, Jan}},
  location     = {{Lille}},
  title        = {{{Determination and prediction of the recycled polyethylene terephthalate content in preforms for the production of beverage bottles}}},
  year         = {{2024}},
}

@misc{11541,
  author       = {{Nordsiek, Jorina}},
  pages        = {{197 / 195 / 67}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Wellenweiser: Konzeption und Umsetzung eines Reisebegleiters für Backpacking-Abenteurer und ihrer Reise zu sich selbst.}}},
  year         = {{2024}},
}

@misc{11549,
  abstract     = {{Documentation 1) of the design part of MONOCAB OWL and 2) of the research and development process 2020 - 2023}},
  author       = {{Nether, Ulrich and Sachs, Hans and Meirelles Reis Sotero de Menezes, Carolina and Müh, Maximilian}},
  isbn         = {{978-3-939349-51-8}},
  pages        = {{140}},
  publisher    = {{Technische Hochschule OWL}},
  title        = {{{MONOCAB design + process}}},
  year         = {{2024}},
}

@misc{11594,
  abstract     = {{This paper proposes an innovative approach of manufacturing optical fibers using nozzle-mask-aided additive manufacturing. Nozzle-masks ease 3D-printing of optical fibers allowing the manufacturing or drawing of optical fibers of up to 10 μm diameter. These nozzle-masks feature a suction mechanism to prevent clogging of printhead and mask. The extrusion of Polymethyl-methacrylate material through the print-head and nozzle-mask simplifies the rapid prototyping of the optical fibers. }},
  author       = {{Shrotri, Abhijeet Narendra and Wittenbröker, Christian and Preu, Sascha and Stübbe, Oliver}},
  booktitle    = {{3D Printed Optics and Additive Photonic Manufacturing IV}},
  editor       = {{von Freymann, Georg and Herkommer, Alois M. and Flury, Manuel}},
  isbn         = {{9781510673083}},
  issn         = {{1996-756X }},
  location     = {{Strasbourg}},
  pages        = {{12995 0A}},
  publisher    = {{SPIE}},
  title        = {{{Design and simulation of a nozzle-mask for optical fiber 3D-printing}}},
  doi          = {{10.1117/12.3017000}},
  volume       = {{12995}},
  year         = {{2024}},
}

@misc{11595,
  abstract     = {{The ability to manufacture complex 3D-objects directly from its CAD model is the important reason why additive manufacturing is being widely used to fabricate cost-efficient prototypes and preferred over conventional manufacturing methods. Moreover, it portrays as a bridging technology to connect different scientific and industrial fields, e.g. Engineering, Medicine, etc. Consequently, additive manufacturing finds its applications in the production of patient-specific orthoses. This paper discusses the development of a pressure sensor based on an optical waveguide principle manufactured using stereolithography apparatus process to embed into a below-knee orthosis. For Orthopedic patients, the below-knee orthosis must be adjusted to the lower leg at regular intervals due to anthropometric changes in patient’s body to achieve proper mobility and correct load. Currently, this alteration relies on the patient’s estimation of support load which is only sub-optimal. Hence, the concept of developing an intelligent orthosis with a novel embedded optical system to monitor the exact support load at the neuralgic is proposed.}},
  author       = {{Shahane, Akshay Manoj and Shrotri, Abhijeet Narendra and Wittenbröker, Christian and Stübbe, Oliver}},
  booktitle    = {{3D Printed Optics and Additive Photonic Manufacturing IV}},
  editor       = {{von Freymann, Georg and Herkommer, Alois M. and Flury, Manuel}},
  isbn         = {{9781510673083}},
  issn         = {{1996-756X}},
  location     = {{Strasbourg}},
  publisher    = {{SPIE}},
  title        = {{{Manufacturing of solid core optical waveguide based pressure sensor for 3D-printed below-knee orthosis}}},
  doi          = {{10.1117/12.3016629}},
  volume       = {{12995}},
  year         = {{2024}},
}

@misc{11605,
  abstract     = {{The recovery of beer from surplus yeast is to date an economical business case only for large breweries. In this work, a here novel process with rotating ceramic microfiltration membranes is used. This allows a very high lift force to be achieved while still maintaining a small transmembrane pressure to reduce the formation of a fouling layer. The results show that long running times (between cleanings) are possible, limited only by the change in the rheological properties of the suspension due to thickening. From a so-called "Inflexion Point" (IF), the filtration behavior changes abruptly. The aim of the work was therefore to use machine learning aided modeling to predict the IF from experimental data in order to optimize the process and to achieve the most economical conditions. The economic efficiency depends on the space-time yields. The results show that a significant improvement in economic efficiency could be possible with the help of modeling and this special kind of filtration technology. However, the economic efficiency depends finally on the conditions in each individual brewery.}},
  author       = {{Trilling-Haasler, Marc and Tebbe, Jörn and Lange-Hegermann, Markus and Schneider, Jan}},
  keywords     = {{surplus yeast, membrane filtration, microfiltration}},
  location     = {{Lille}},
  title        = {{{Yeast filtration with rotating membrane filtration –  a new approach for an economical recovery of beer form surplus yeast }}},
  year         = {{2024}},
}

@misc{11607,
  abstract     = {{Pasteurization of bottles and cans is an important technique for biological stabilization of beer as well as mixed beer drinks, malt beer and non-alcoholic beers. Despite recuperation, the heat requirement is very high and can be significantly reduced by lowering the maximum temperature in the pasteurizer. The current practice of calculating the lethal heat effect is based on the so-called beer formula using a globalized z-value for the temperature dependence of the inactivation. The premise experiments here is that for products containing sugar, such as malt beer, yeast cells pose the greatest danger. Therefore, the D values at various temperatures and the z values of three of the Krombacher Brewery's own yeasts (bottom-fermenting and top-fermenting) were determined in the laboratory using the capillary method. In a challenge test in the brewery, bottles with different products were inoculated with these yeasts and samples were taken from the industrial pasteurizer every two minutes and examined for viable cell counts. Accordingly, using specific D/z values, precise pasteurization can be achieved, the treatment temperature can be reduced to 55° C and 20-25% of energy can be saved.}},
  author       = {{Nolte, Jannik and Hense, Ludger  and Weishaupt, Imke and Schneider, Jan}},
  keywords     = {{pasteurization, D value, z-value, heat energy savings, large scale trials, biological stability, yeast}},
  location     = {{Lille}},
  title        = {{{How do you turn a shotgun into a precision rifle - significant heat savings through the use of kinetic laboratory data (D/z values) in large-scale pasteurization}}},
  year         = {{2024}},
}

@misc{11608,
  abstract     = {{The handling of beer-yeast suspensions (BYS) occurs in several brewery processes , as in  pitching, propagation or beer recovery. Highly concentrated BYS do not behave like a shear thinning fluid but like a dilatant fluid. Above a solid content >18% shear stress, as generated turbulences or wall friction increases the dynamic viscosity of the fluid. It is precisely here that influencing factors that have received little attention as the effect of different cell sizes to date can make themselves felt. Even if there is only one yeast strain used in a brewery different cell sizes can occur when there are different osmotic pressures, induced by sugar and alcohol concentration. In this work, the cell size distributions of a Saccharomyces strain were artificially varied and measured. Rheological studies were then carried out on these BYS. Results show that increasing mean cell diameters (sauter diameter) lead to a change in the rheological behavior. It is assumed that cell sizes are also relevant to processing in practice, especially where high concentrations are achieved. Especially for handling these highly concentrated BYS with high shear pumps or agitators it is therefore important to know the relationship between the mean cell diameter and the either shear thinning or shear thickening rheological behavior, because even with the same yeast concentration both rheological behaviors can occur.}},
  author       = {{Trilling-Haasler, Marc and Jürgensmeier, Simon-Elias and Schneider, Jan}},
  keywords     = {{yeast, rheology, cell size, osmotic pressure, filtration}},
  location     = {{Lille}},
  title        = {{{Influence of osmotic pressure induced yeast particle size on the rheological properties of beer-yeast-suspensions}}},
  year         = {{2024}},
}

@misc{11612,
  author       = {{Stawinoga, Martin}},
  booktitle    = {{Der Betrieb}},
  issn         = {{0005-9935 }},
  number       = {{27/28}},
  pages        = {{1629--1634}},
  publisher    = {{Fachmedien Otto Schmidt KG}},
  title        = {{{Ethik- und Unabhängigkeitsstandards für die Prüfung eines Nachhaltigkeitsberichts – Eine Erörterung des IESBA-Konsultationsentwurfs}}},
  volume       = {{77}},
  year         = {{2024}},
}

@misc{11637,
  abstract     = {{In Städten und Kommunen kommt dem Vorhandensein und der Qualität einer Blau-Grünen Infrastruktur aufgrund des Klimawandels eine besonders hohe Bedeutung zu. Stadtbäume können aufgrund von Wasserknappheit, Hitzestress sowie sich ausbreitender Krankheiten und Schädlinge die ihnen zugedachten klimatischen und gestalterischen Funktionen immer weniger erfüllen. Gleichzeitig können die verschiedenen Belastungen nicht durch technische Lösungen kompensiert werden. Sinnvoller ist es, dieser Situation mit einer übergeordneten strategischen Freiraumplanung zu begegnen, die die Blau-Grüne Infrastruktur zum einen sichert und weiterentwickelt, zum anderen ihre Wohlfahrtswirkung für alle Bevölkerungsgruppen zugänglich macht sowie die verschiedenen Freiräume und Freiraumfunktionen gerecht verteilt. GIS-basierte Modelle können hier eine gute Planungsgrundlage bilden, indem sie dabei helfen, prioritäre Handlungsräume zu bestimmen und Maßnahmen zu benennen. Neben der Diskussion kommunaler Ziele für die Freiraumentwicklung bedarf es hierfür deren Übersetzung in ein GIS-Modell. Dabei sind verschiedene Annahmen hinsichtlich der Erreichbarkeit oder den Flächenansprüchen zur Freiraumnutzung verschiedener Bevölkerungsgruppen zu treffen. Da es hierzu zwar zahlreiche Praxisbeispiele aus unterschiedlichen Städten gibt (Berlin, Dresden, Frankfurt a. Main, Graz, Hamburg, Hoyerswerda, Leipzig, Magdeburg, Mannheim, München, Nürnberg, Rheine, Wien und Zürich [1, S. 43f]), die im Wesentlichen auf den Werten der Gartenamtsleiterkonferenz aus dem Jahr 1973 fußen, diese aber bislang weder empirisch noch anderweitig wissenschaftlich belegt werden konnten, besteht bezüglich der anzusetzenden Orientierungswerte nach wie vor Forschungsbedarf [1, S. 39ff]. Auch wenn die argumentativ hergeleiteten Orientierungswerte überprüft werden müssen, liefern die GIS-Modelle planerisch relevante Ergebnisse, da die getroffenen Annahmen für alle Flächen und die gesamte Bevölkerung gelten und die Unterscheidung von gut, mäßig oder schlecht mit Freiräumen versorgten Bereichen ablesbar ist. Um aus den Ergebnissen planerische Maßnahmen abzuleiten, bleibt es aber erforderlich, räumliche Restriktionen (z. B. Barrieren) oder Begabungen, wie das Vorhandensein von Flächenpotenzialen in einem synthetischen Entwurfsprozess, zu einem sinnvollen Ergebnis zusammenzuführen. Das GIS-Modell zur Beurteilung der Freirauversorgung stellt somit einen zentralen Baustein der Umweltgerechtigkeit auf kommunaler Ebene dar.}},
  author       = {{Deppe, Katharina and Rohler, Hans-Peter and Yang, Yunbo}},
  booktitle    = {{Umweltinformationssysteme - Digitalisierung im Zeichen des Klimawandels und der Energiewende (UIS 2023)}},
  editor       = {{Fuchs-Kittowski, Frank and Abecker, Andreas and Hosenfeld, Friedhelm and Reineke, Anja and Jolk, Christian}},
  isbn         = {{978-3-658-43734-3}},
  keywords     = {{Strategische Freiraumplanung, Umweltgerechtigkeit, Freiraumversorgung, Entscheidungshilfeinstrument, GIS}},
  location     = {{Höxter}},
  pages        = {{63--80}},
  publisher    = {{Springer}},
  title        = {{{Freiraumversorgung als zentraler Baustein von Umweltgerechtigkeit GIS-Studien als Grundlagen strategischer Freiraumplanung}}},
  doi          = {{10.1007/978-3-658-43735-0_5}},
  year         = {{2024}},
}

@misc{11657,
  booktitle    = {{Sustainable facades ::: summer semester report}},
  editor       = {{Balderrama, Alvaro and Arztmann, Daniel}},
  number       = {{9}},
  publisher    = {{Technische Hochschule Ost-Westfalen Lippe}},
  title        = {{{Design Strategies}}},
  volume       = {{2023}},
  year         = {{2024}},
}

@misc{11660,
  author       = {{Große Föller, Lisa}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe }},
  title        = {{{Prokrastination unter Studierenden: Eine Auseinandersetzung mit  den Ursachen, Problemen und  Methoden zur Lösung des  Aufschiebens}}},
  year         = {{2024}},
}

@misc{11663,
  abstract     = {{Geosynthetic Clay Liners (GCL) are widely used in sealing applications throughout the world. In applications with constant water heads - such as artificial ponds, rivers, canals, etc. - the permeation rate through the GCL is of vital importance to the performance of the whole structure and the allocated function. A proper design must consider all potential sources of water loss in the designed application. This includes also the performance of overlaps or the combined effect of multiple sealing layers. Some factors are sometimes misinterpreted, underestimated or not considered.
The presented paper will focus on two major topics, each affecting the performance of geosynthetic sealing systems with special focus on geosynthetic clay liners (GCL). The impact of these effect is to be illustrated on exemplary calculations for virtual projects. The quantification of these effects will result in recommendations that shall help to anticipate unfavorable situations for the operational phase of a project already in the design stage. This shall contribute to a better overall understanding of GCL and help to avoid preventable design errors. An outlook shall summarize the further efforts envisaged by the authors to provide a simple tool to allow calculation of permeation rates for GCL or complete barrier systems.}},
  author       = {{Köhler, Martin and Niehues, Christian and von Maubeuge, Kent P.}},
  booktitle    = {{Geosynthetics: Leading the Way to a Resilient Planet : PROCEEDINGS OF THE 12TH INTERNATIONAL CONFERENCE ON GEOSYNTHETICS (12ICG), 17–21 SEPTEMBER 2023, ROMA, ITALY}},
  editor       = {{Biondi, Giovanni and Cazzuffi, Daniele and Moraci, Nicola and Soccodato, Claudio}},
  location     = {{Rome}},
  pages        = {{1610--1614}},
  publisher    = {{CRC Press, Taylor & Francis Group}},
  title        = {{{Considerations for the Calculation of Permeation Rates for Geosynthetic Clay Liners in Constant Water Head Applications}}},
  doi          = {{10.1201/9781003386889}},
  year         = {{2024}},
}

@book{11666,
  abstract     = {{Den Knoten entwirren
Alles hängt mit allem zusammen. Was sich anhört wie eine Binsenweisheit, ist in der Industrie tägliche Praxis geworden. Komplexität und „Verschränktheit“ der Prozesse in Entwicklung und Produktion wachsen vielen Unternehmen über den Kopf. Der Durchblick geht verloren, die Kosten laufen davon.

Das muss nicht so sein. Wie man der grassierenden Komplexität mit Methode zu Leibe rückt, zeigt dieses elektronische Buch. Denn darum geht es in der Praxis: Trotz vermeintlich intelligenter Systeme im Unternehmen den Überblick behalten und die Komplexität beherrschen. 

Mittel zum Zweck ist ein Assistenzsystem, das im Rahmen eines Forschungsprojektes entwickelt wurde und jetzt für den Einsatz bereitsteht. Damit das System nicht übergestülpt, sondern schrittweise erlernt und wirklich gelebt werden kann, wird ein flankierendes Konzept zur Befähigung präsentiert.

Das Team um Herausgeber Andreas Deuter, seines Zeichens Professor an der Technischen Hochschule Ostwestfalen-Lippe (TH OWL), hat ein kompaktes und verständliches Buch verfasst. Ein echtes LOGiBit eben.}},
  author       = {{Herrmann, Jan-Phillip and Imort, Sebastian and Trojanowski, Christoph and Pankrath, Carolin}},
  editor       = {{Deuter, Andreas}},
  publisher    = {{LOG_X Verlag}},
  title        = {{{Den Überblick behalten }}},
  year         = {{2024}},
}

@misc{11716,
  author       = {{Wittland, Sebastian}},
  location     = {{Köln}},
  title        = {{{Investigation and characterization of the techno functional and sensory properties of allulose in baked goods}}},
  year         = {{2024}},
}

@book{11725,
  author       = {{Köhler, Martin and Ulonska, Dietmar and Wellner, Frohmut}},
  pages        = {{118}},
  publisher    = {{Betonverband Straße, Landschaft, Garten e.V. (SLG)}},
  title        = {{{ Technisches Handbuch - Dauerhafte Verkehrsflächen mit Betonpflastersteinen}}},
  year         = {{2024}},
}

@misc{11752,
  author       = {{Block, Hilla}},
  pages        = {{95}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Whatever that means: Experimentelle Typografie }}},
  year         = {{2024}},
}

@misc{11755,
  editor       = {{Hofmann, Martin Ludwig}},
  issn         = {{2566-8382}},
  number       = {{16}},
  pages        = {{154}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{52 Grad : Magazin, Stadtplanung }}},
  year         = {{2024}},
}

@misc{11777,
  abstract     = {{Mit der CSRD-Richtlinie geht eine verbindliche materielle Prüfung des Nachhaltigkeitsberichts mit zunächst begrenzter Sicherheit einher. Diese Prüfung ist allerdings noch nicht durch Standards bzw. Leitlinien konkretisiert. Die EU-Kommission beabsichtigt zwar, solche Standards für die Prüfung mit begrenzter bzw. hinreichender Sicherheit zu entwickeln. Deren Verabschiedung wird aber aller Voraussicht nach erst im Jahr 2026 bzw. 2028 erfolgen. Vor diesem Hintergrund hat die EU-Kommission den Committee of European Auditing Oversight Bodies (CEAOB) mit der Entwicklung einer unverbindlichen Leitlinie für die Prüfung eines Nachhaltigkeitsberichts mit begrenzter Sicherheit beauftragt, welchem vor allem für die Prüfung der Nachhaltigkeitsberichte der Geschäftsjahre 2024 und 2025 eine besondere Bedeutung zukommen wird. Der im Juni 2024 vorgelegte Konsultationsentwurf ist Gegenstand dieses Beitrags.}},
  author       = {{Stawinoga, Martin}},
  booktitle    = {{Der Konzern}},
  issn         = {{1611-2296}},
  number       = {{7/8}},
  pages        = {{293--299}},
  publisher    = {{Fachmedien Otto Schmidt KG}},
  title        = {{{Leitlinie für die Prüfung eines Nachhaltigkeitsberichts mit begrenzter Sicherheit – Eine Erörterung des CEAOB-Konsultationsentwurfs}}},
  year         = {{2024}},
}

@misc{11778,
  author       = {{Sandrowski, Khira}},
  pages        = {{66}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Zwischen Informationspflicht und Sensationslust - Die Rolle der Medien in der journalistischen Berichterstattung von Kriminalfällen am Beispiel des Mediums Podcast}}},
  year         = {{2024}},
}

@misc{11779,
  author       = {{Bergen, Jenny}},
  pages        = {{91}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Journalismus in einer emanzipierten Gesellschaft : Eine Analyse der Frauenbilder in Magazinen}}},
  year         = {{2024}},
}

@misc{11789,
  author       = {{Frühwald-König, Katja}},
  location     = {{Lemgo}},
  title        = {{{Forestry and Timber Industry in the Context of the Bioeconomy of North Rhine-Westphalia}}},
  year         = {{2024}},
}

@misc{11792,
  abstract     = {{To facilitate the drying process and enhance the properties of oil palm wood, oil palm boards were mechanically pre-dewatered and thermo-hygro-mechanically (THM) densified. The thickness of the boards was reduced with compression ratios of 40%, 60% and 75%. Since densified wood tends to recover from compression, especially under humid conditions, this study examined the set-recovery and the hygroscopic behavior of THM densified oil palm wood. The equilibrium moisture content (EMC), differential swelling and swelling coefficient, linear swelling and shrinkage as well as the differential swelling anisotropy were determined under climate conditions with different relative humidity (RH) (20°C/35% RH, 20°C/65% RH and 20°C/85% RH). The maximum swelling was measured after water soaking and the remaining set-recovery was evaluated after re-drying at 103°C. The EMC was reduced by the THM process by around 20%. In the direction of compression (thickness), the densified specimens show higher values for all analyzed swelling and shrinkage parameters than the undensified specimens from the equivalent position within the trunk. The maximum swelling in thickness of 22–38% during water soaking is mostly reversed by shrinkage during re-drying and a comparably low remaining set-recovery of 3–8% is measured at oven dry condition.}},
  author       = {{Kölli, Nathan and Frühwald-König, Katja and Hackel, Martin}},
  booktitle    = {{Wood Material Science & Engineering}},
  issn         = {{1748-0280}},
  keywords     = {{Densification, set-recovery, swelling and shrinkage}},
  pages        = {{1--12}},
  publisher    = {{Taylor & Francis}},
  title        = {{{Hygroscopic behavior of thermo-hygro-mechanical (THM) densified oil palm sawn timber}}},
  doi          = {{10.1080/17480272.2024.2381100}},
  year         = {{2024}},
}

@misc{11793,
  abstract     = {{One obstacle to the industrial processing of oil palm wood is its nearly water-saturated state in green condition and its high tendency to develop cell collapse during kiln drying. This study analyzed mechanical dewatering by flat compression as an alternative pre-drying method for wet oil palm sawn timber. In the process, boards 700 mm long were compressed at ratios of 40% and 60% using a laboratory press, which resulted in water extraction of the free water varying between 38–52% and 60–73%, respectively. Since unperforated press plates were used, the water could only escape over the crosscut and long edges. The extent to which the crosscut and long edges were involved in dewatering was examined, and found to depend on the position of the board in the trunk due to the different water permeability conditions at the different heights. Permeability measurements, therefore, were carried out on cylindrical specimens using a specifically designed testing device. For the analysis of the hydrostatic pressure development in the boards, three pressure transducers were installed at different distances to the crosscut at half board thickness. The analysis of the recovery of compression showed, that the boards recovered to a large extend immediately after compression.}},
  author       = {{Kölli, Nathan}},
  booktitle    = {{Wood Material Science & Engineering}},
  issn         = {{1748-0280}},
  keywords     = {{Flat compression, hydrostatic pressure, mechanical dewatering, water permeability}},
  pages        = {{1--15}},
  publisher    = {{Taylor & Francis}},
  title        = {{{Dewatering behavior of wet oil palm sawn timber during flat compression}}},
  doi          = {{10.1080/17480272.2024.2355545}},
  year         = {{2024}},
}

@misc{11795,
  author       = {{Hackel, Martin}},
  location     = {{Möhnesee-Günne}},
  title        = {{{Nutzungspotenziale klimaadaptiver Holzarten}}},
  year         = {{2024}},
}

@misc{11798,
  author       = {{Schröter, Pia-Sophie}},
  pages        = {{120}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{Marketing im Metaverse - Chancen und Risiken für Unternehmen}}},
  year         = {{2024}},
}

@misc{11807,
  author       = {{Klepp, Georg Heinrich}},
  booktitle    = {{Kraftstoffe Für Die Mobilität Von Morgen : 6. Tagung der Fuels Joint Research Group Am 13. und 14. Juni 2024 in Berlin}},
  editor       = {{Munack, Axel and Krahl, Jürgen and Bünger, Jürgen and Eilts, Peter}},
  location     = {{Berlin}},
  pages        = {{103--109}},
  publisher    = {{Cuvillier Verlag}},
  title        = {{{Digitaler Kraftstoffzwilling}}},
  volume       = {{35}},
  year         = {{2024}},
}

@misc{11808,
  abstract     = {{The application of hydrogen for energy storage and as a vehicle fuel necessitates efficient and effective storage technologies. In addition to traditional cryogenic and high-pressure tanks, an alternative approach involves utilizing porous materials such as activated carbons within the storage tank. The adsorption behaviour of hydrogen in porous structures is described using the Dubinin-Astakhov isotherm. To model the flow of hydrogen within the tank, we rely on the equations of mass conservation, the Navier-Stokes equations, and the equation of energy conservation, which are implemented in a computational fluid dynamics code and additional terms account for the amount of hydrogen involved in sorption and the corresponding heat release. While physical models are valuable, data-driven models often offer computational advantages. Based on the data from the physical adsorption model, a data-driven model is derived using various machine learning techniques. This model is then incorporated as source terms in the governing conservation equations, resulting in a novel hybrid formulation which is computationally more efficient. Consequently, a new method is presented to compute the temperature and concentration distribution during the charging and discharging of hydrogen tanks and identifying any limiting phenomena more easily.}},
  author       = {{Klepp, Georg Heinrich}},
  booktitle    = {{Energy : the international journal ; technologies, resources, reserves, demands, impact, conservation, management, policy}},
  issn         = {{1873-6785}},
  keywords     = {{Hydrogen storage, Adsorption, Activated carbon, Machine learning, Simulation, Computational fluid dynamics}},
  publisher    = {{Elsevier BV}},
  title        = {{{Modelling activated carbon hydrogen storage tanks using machine learning models}}},
  doi          = {{10.1016/j.energy.2024.132318}},
  volume       = {{306}},
  year         = {{2024}},
}

@misc{11809,
  author       = {{Klepp, Georg Heinrich and Broeker, Timo and Schneidewind, Niko}},
  booktitle    = {{Proceedings of the 12th European Conference on Renewable Energy Systems (ECRES 2024)}},
  editor       = {{Kurt, Erol}},
  location     = {{Palma de Mallorca, Spain}},
  publisher    = {{Erol Kurt}},
  title        = {{{Evaluation of The Techno-Economic Aspects and Sustainability of Integrated  Renewable Energy Systems}}},
  year         = {{2024}},
}

@misc{11810,
  author       = {{Klepp, Georg Heinrich}},
  booktitle    = {{Proceedings of the 12th European Conference on Renewable Energy Systems (ECRES 2024)}},
  editor       = {{Kurt, Erol}},
  location     = {{Palma de Mallorca, Spain}},
  publisher    = {{Erol Kurt}},
  title        = {{{Integration of Solar Stirling in A Multi-Generation and Storage Power System}}},
  year         = {{2024}},
}

@misc{11811,
  author       = {{Klepp, Georg Heinrich}},
  location     = {{Bamberg}},
  title        = {{{Kopplung von CFD mit datengetriebenen Modellen:  Sorption von Wasserstoff}}},
  year         = {{2024}},
}

@misc{11819,
  author       = {{Wolthaus, Sebastian}},
  pages        = {{105}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Das kommerzielle Potenzial deutscher Mythen und Sagen im Film: Eine Analyse für Filmproduzenten}}},
  year         = {{2024}},
}

@misc{11821,
  author       = {{Ludwig, Steffen}},
  pages        = {{102}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Hauntology im Film - Stilistische Merkmale am Beispiel der Berliner Schule}}},
  year         = {{2024}},
}

@misc{11823,
  abstract     = {{This study investigates the macromechanical and micromechanical behavior of oil palm wood by testing the elastomechanical properties in bending, compression parallel and perpendicular and tension parallel and perpendicular to the vascular bundles of small-size test specimen depending on the position within the trunk, the density and the number of vascular bundles per unit area as well as the plantation site. All properties tested show a much higher exponential increase with the density, following power law relationships with exponents > 1, than common wood species and a significant gradient over both trunk height and cross section. Oil palm wood can be seen as a unidirectional long-fiber-reinforced bio-composite, if vascular bundles are considered as reinforcements (fibers) and parenchymatous ground tissue as matrix. The adapted rule-of-mixture based on the number of vascular bundles per unit area can be confirmed for the density, but not for the tensile properties, because the number of vascular bundles per unit area and share of fibers within the bundles is greater in the periphery than in the trunk central tissue. Furthermore, cell wall thickening over time is more pronounced in the peripheral than in the central tissue and more at the bottom than near the top. Different from small test specimens from common wood species, the compression strength exceeds the tensile strength: fc,0 : fm : ft,0 is 1.4 : 2.2–1.2 : 1. The performance indices for minimum weight design by Ashby and coworkers are comparable to that for coconut and date palm wood.}},
  author       = {{Frühwald-König, Katja and Heister, Lena}},
  booktitle    = {{European journal of wood and wood products : Holz als Roh- und Werkstoff }},
  issn         = {{1436-736X}},
  keywords     = {{MECHANICAL-PROPERTIES, STEM, FAILURE}},
  publisher    = {{Springer}},
  title        = {{{Macro- and micromechanical behavior of oil palm wood (Elaeis  guineensis JACQ.): tensile, compression and bending properties}}},
  doi          = {{https://doi.org/10.1007/s00107-024-02131-w}},
  year         = {{2024}},
}

@inbook{11834,
  abstract     = {{Als Einstieg beleuchten wir einige Grundlagen zum Thema Kompetenzmodelle. Zunächst definieren wir den Kompetenzbegriff (Abschn. 3.1). Anschließend geben wir einen Einblick in Kompetenzmodelle der Wissenschaft und Praxis (Abschn. 3.2). In Abschnitt 3.3 identifizieren wir für den Teamerfolg maßgebende Kompetenzen und stellen einen zweistufigen Prozess vor, wie ein praktikables Kompetenzmodell entwickelt werden kann. Im Anschluss überprüfen wir den prädiktiven Wert der von uns identifizierten Kompetenzen für den Teamerfolg anhand einer empirischen Untersuchung (Abschn. 3.4).}},
  author       = {{Agethen, Katharina and Iseke, Anja}},
  booktitle    = {{Digitales und prädiktives Kompetenzmanagement. }},
  editor       = {{Thommes, Kirsten and Iseke, Anja and Schneider, Martin}},
  isbn         = {{978-3-662-68837-3}},
  issn         = {{2523-3645}},
  pages        = {{21--56}},
  publisher    = {{Springer}},
  title        = {{{Kompetenzmodelle: Was wird gemessen?}}},
  doi          = {{10.1007/978-3-662-68838-0_3}},
  year         = {{2024}},
}

@misc{11837,
  author       = {{Mundt, Julian}},
  pages        = {{42}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{LUCID PERCEPTION - Visuelle Selbstwahrnehmung von künstlichen Intelligenz Generatoren unter Inbetrachtnahme der derzeit gültigen Ethikrichtlinien.}}},
  year         = {{2024}},
}

@misc{11841,
  author       = {{Giesbrecht, Emily}},
  pages        = {{93}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Inwiefern ist Social Recruiting ein effektives Werkzeug im OWL-Handwerk im Rahmen der Nachwuchsgewinnung?}}},
  year         = {{2024}},
}

@misc{11844,
  author       = {{Pamuk, Aykut-Rasih}},
  pages        = {{48}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Einfluss der Gestaltung von Werbeanzeigen in sozialen Medien auf die Conversion-Raten und Generierung von Leads}}},
  year         = {{2024}},
}

@misc{11846,
  author       = {{Hafer, Melina}},
  pages        = {{413}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Sympathie und Antipathie im Film - Zuschauerwirkung sowie gestalterische und narrative Möglichkeiten der Unterstützung unter besonderer Berücksichtigung des filmischen Schnitts}}},
  year         = {{2024}},
}

@misc{11848,
  author       = {{Packmohr, Robin}},
  pages        = {{55}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Medienkritik und ihr Einfluss auf Rezipienten am Beispiel Film}}},
  year         = {{2024}},
}

@unpublished{11850,
  abstract     = {{Deployment of Level 3 and Level 4 autonomous vehicles (AVs) in urban environments is significantly constrained by adverse weather conditions, limiting their operation to clear weather due to safety concerns. Ensuring that AVs remain within their designated Operational Design Domain (ODD) is a formidable challenge, making boundary monitoring strategies essential for safe navigation. This study explores the critical role of an ODD monitoring system (OMS) in addressing these challenges. It reviews various methodologies for designing an OMS and presents a comprehensive visualization framework incorporating trigger points for ODD exits. These trigger points serve as essential references for effective OMS design. The study also delves into a specific use case concerning ODD exits: the reduction in road friction due to adverse weather conditions. It emphasizes the importance of contactless computer vision-based methods for road condition estimation (RCE), particularly using vision sensors such as cameras. The study details a timeline of methods involving classical machine learning and deep learning feature extraction techniques, identifying contemporary challenges such as class imbalance, lack of comprehensive datasets, annotation methods, and the scarcity of generalization techniques. Furthermore, it provides a factual comparison of two state-of-the-art RCE datasets. In essence, the study aims to address and explore ODD exits due to weather-induced road conditions, decoding the practical solutions and directions for future research in the realm of AVs.}},
  author       = {{Subramanian, Ramakrishnan and Büker, Ulrich}},
  booktitle    = {{Engineering}},
  publisher    = {{MDPI AG}},
  title        = {{{Study of Contactless Computer Vision-based Road Condition Estimation Methods within the Framework of an Operational Design Domain Monitoring System}}},
  doi          = {{10.20944/preprints202407.2591.v1}},
  year         = {{2024}},
}

@misc{11854,
  author       = {{Schmid, Nina}},
  pages        = {{124}},
  publisher    = {{Technische Hoschule Ostwestfalen-Lippe}},
  title        = {{{Design for the Brain: Die Erforschung der Beziehung zwischen Gehirnprozessen und Wahrnehmung – Wie Neurodesign Innovation im Grafikdesign fördern kann. }}},
  year         = {{2024}},
}

@misc{11857,
  abstract     = {{Diese Bachelorarbeit befasst sich mit der Erweiterung des Marketingkonzepts der MGL LICHT GmbH durch die Integration von Content-Marketing-Strategien, um die Markteinführung eines neuen Schallabsorber-Zubehörprodukts zu unterstützen. Ziel ist es, die Marktpräsenz des Unternehmens im Bereich der Raumakustik zu stärken und neue Kundenkreise zu erschließen. Die Arbeit beginnt mit einer theoretischen Einführung in die Grundlagen des Marketings und des Content Marketings, gefolgt von einer Darstellung des bestehenden Produktportfolios und der aktuellen Marktposition von MGL LICHT. Darauf aufbauend wird ein maßgeschneidertes Content-Marketing-Konzept entwickelt, das verschiedene Formate wie Whitepapers, Social Media Posts und interaktive Inhalte umfasst. Diese Formate werden strategisch entlang der Customer Journey eingesetzt, um die Zielgruppe effektiv anzusprechen und die Kundenbindung zu fördern. Abschließend werden die potenziellen Auswirkungen der vorgeschlagenen Maßnahmen auf die Unternehmensziele sowie die zukünftigen Chancen und Herausforderungen für MGL LICHT diskutiert. }},
  author       = {{Limberg, Robin}},
  pages        = {{82}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Erweiterung des Marketingkonzepts der Firma MGL LICHT GmbH durch Content Marketing – Akquirierung neuer Kunden im Bereich der Raum-Akustik}}},
  year         = {{2024}},
}

@misc{11860,
  author       = {{Katsch, Linda and Sokolowsky, Martina and Schneider, Jan}},
  location     = {{Freising}},
  title        = {{{Zeit-Temperatur-Optimierung in der Saftpasteurisation: Physikalische, chemische und sensorische Effekte auf Apfel- und Karottensaft}}},
  year         = {{2024}},
}

@misc{11861,
  author       = {{Nether, Ulrich and Herrmann, Kristina and Scharfe, Greta Gesine}},
  keywords     = {{Partizipation, Kindertagesstätten Gestaltung, Lehre und Forschung}},
  pages        = {{118}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Raum partizipativ entwickeln - Gestaltung der KiTa Ahornallee}}},
  year         = {{2024}},
}

@misc{11863,
  author       = {{Budde, Markus}},
  pages        = {{140}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Branding Light: Entwicklung einer Markenidentität und Verpackungsdesign für eine individuelle Tischleuchte}}},
  year         = {{2024}},
}

@misc{11865,
  author       = {{Henning, Marvin}},
  keywords     = {{Nostalgie, Psychologie, Magazin, Zeitung, Nostalgia, Nostalgie in Medien, Medienpsychologie, Mediennostalgie}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Nostalgie in Medien – Konzeption und Gestaltung eines crossmedialen Magazins für die Generation Z}}},
  year         = {{2024}},
}

@misc{11869,
  abstract     = {{Diese Bachelorarbeit untersucht die Stärken und Schwächen von Extended Reality (XR). Ziel ist 
es das Potenzial dieser Technologie herauszuarbeiten und den gegenwärtigen Stand der 
Technologie aufzuzeigen. Dazu analysiert die vorliegende Arbeit die bisherige historische 
Entwicklung von XR (VR, AR, MR) aus verschiedenen Perspektiven. Sie geht auf technologische, 
wirtschaftliche Aspekte, sowie auf zukünftige Prognosen ein.  
Im praktischen Teil der Arbeit wurde eine Anwendung in der Programmierumgebung Unity für die 
Oculus Quest 3 entwickelt. Diese soll den gegenwärtigen Stand der XR-Technologie 
veranschaulichen und die theoretischen Erkenntnisse durch eine praxisnahe Umsetzung 
untermauern.}},
  author       = {{Kramer, Anna}},
  keywords     = {{XR, VR, AR, MR, Unity}},
  pages        = {{56}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Stärken und Schwächen der XR Technologie: Eine Analyse der  Entwicklung von XR mit Fokus auf Pass Through und Screen Scripting der Quest 3}}},
  year         = {{2024}},
}

@misc{11873,
  abstract     = {{Der Beitrag stellt die Funktionalität und technische Architektur eines prototypischen GIS-basierten Entscheidungsunterstützungssystems vor, das dabei helfen soll, Maßnahmen zur Minderung von Treibhausgasemissionen durch Bauen und Sanieren mit Holz als Baumaterial auf der kommunalen Ebene zu bewerten und zu planen. In verschiedenen WebGIS-basierten Ansichten und Dashboards können die möglichen Klimaschutzeffekte durch Bauen und Sanieren mit Holz als Baustoff für eine Stadt, einzelne Gebäude, beliebige Agglomerationen oder auch für bestimmte Bebauungspläne in der Kommune abgeschätzt und ausgewertet werden. Diese möglichen Klimaschutzeffekte ergeben sich in den Kalkulationsszenarien Neubau bzw. energetische Sanierung bspw. durch Einsparungen im Betrieb (Heizung und Warmwasserbereitung), durch CO2-Speicherung im Baumaterial und durch den Ersatz der vergleichsweise klimabelastenden mineralischen Bauweise.}},
  author       = {{Mattes, Christoph and Zernicke, Caya and Abecker, Andreas and Hafner, Annette  and Jolk, Christian and Stolpe, Harro  and Zemann , Moritz }},
  booktitle    = {{Umweltinformationssysteme - Digitalisierung im Zeichen des Klimawandels und der Energiewende (UIS 2023)}},
  editor       = {{Fuchs-Kittowski, Frank and Abecker, Andreas and Hosenfeld, Friedel and Reineke, Anja and Jolk, Christian}},
  keywords     = {{Entscheidungsunterstützungssystem, Geodatenanalyse, GIS, Holzbau, Treibhausgasemissionsminderung, Kommunales Klimaschutzkonzept}},
  location     = {{Höxter}},
  pages        = {{167--184}},
  publisher    = {{Springer}},
  title        = {{{Holzbau-GIS: Ein Prototyp zur Darstellung von Treibhausgasminderungspotenzialen auf der städtischen Ebene durch Nutzung von Holz als Baumaterial}}},
  doi          = {{10.1007/978-3-658-43735-0_12}},
  year         = {{2024}},
}

@proceedings{11874,
  abstract     = {{Der neueste Stand der Forschung und Entwicklung auf dem Gebiet der Umweltinformatik (UI) und umweltbezogener IT-Anwendungsbereiche wird in diesem Tagungsband präsentiert und kritisch diskutiert. Dies umfasst sowohl Konzepte und Anwendungen von Umweltinformationssystemen als auch Technologien, die moderne Umweltinformationssysteme unterstützen und ermöglichen.}},
  editor       = {{Fuchs-Kittowski, Frank and Abecker, Andreas and Hosenfeld, Friedhelm and Reineke, Anja and Jolk, Christian}},
  isbn         = {{978-3-658-43734-3}},
  keywords     = {{Computer Science, Informatics, Conference Proceedings, Research, Applications, Visualisierung von Umweltdaten, Datenanalyse mit Umweltinformationssystemen, Umweltbezogene Daten}},
  location     = {{Höxter}},
  pages        = {{302}},
  publisher    = {{Springer}},
  title        = {{{Umweltinformationssysteme - Digitalisierung im Zeichen des Klimawandels und der Energiewende (UIS 2023) }}},
  doi          = {{10.1007/978-3-658-43735-0}},
  year         = {{2024}},
}

@misc{11879,
  author       = {{Jolk, Christian and Haelke, Tobias and Timmer, Mirco and Kaußen, Lucas}},
  location     = {{Bamberg}},
  title        = {{{Digitale Zwillinge in der Landschaftsarchitektur und der Umweltplanung – Fallbeispiele aus Lehre und Forschung}}},
  year         = {{2024}},
}

@misc{11886,
  author       = {{Van Massenhove, Tamina}},
  pages        = {{93}},
  publisher    = {{Technische Hochschule OWL}},
  title        = {{{Nachhaltig Leben: Die Konzipierung einer geführten Nachhaltigkeits-App zur Förderung von Umweltbewusstsein im Alltag. }}},
  year         = {{2024}},
}

@misc{11887,
  author       = {{Mönnig, Franziska}},
  pages        = {{98}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Zwischen Realität und Emotion: Eine Formatanalyse von Realityshows mit Fokus auf audiovisuelle Emotionen im Fernsehen}}},
  year         = {{2024}},
}

@misc{11891,
  abstract     = {{The aim of the present study was to texturise protein from sunflower press cake (SPC) for being consumed as dry snack or, in its hydrated state, as a meat analogue. In preliminary experiments, feed moisture (15–25 g 100 g−1) and extrusion temperature (180 °C–200 °C) were varied when processing commercial sunflower protein flour with a protein content of 51.8 g per 100 g dry matter using low moisture single-screw extrusion. The extrudates were analysed with regard to specific mechanical energy needs, texture properties in dry and hydrated state, colour, expansion ratio and water binding capacity. Extrusion parameters for achieving maximum expansion, textural force and minimal product moisture were found to be 180 °C and 15 g 100 g−1. Consequently, texturised protein was derived from deoiled SPC using these extrusion parameters. Initial deoiling of the press cake was necessary as it improved texturisation; a higher SME input reached led to increased cross-linking of the protein matrix. The light coloured and significantly expanded extrudates with high water binding capacity and could serve as basis for further development of snack products or meat analogues.}},
  author       = {{Morejon Caraballo, Sophie and Fischer, Simon Vincent and Masztalerz, Klaudia and Lech, Krzysztof and Rohm, Harald and Struck, Susanne}},
  booktitle    = {{International journal of food science & technology}},
  issn         = {{1365-2621}},
  keywords     = {{By-products, extrusion, meat analogue}},
  publisher    = {{Wiley-Blackwell}},
  title        = {{{Low moisture texturised protein from sunflower press cake}}},
  doi          = {{ https://doi.org/10.1111/ijfs.17513}},
  year         = {{2024}},
}

@misc{11893,
  author       = {{Schöning, Matthias}},
  pages        = {{84}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Die Rolle der Bildgestaltung in der Darstellung innerer Konflikte und Emotionen im szenischen Film}}},
  year         = {{2024}},
}

@misc{11895,
  abstract     = {{Durch die Corporate Sustainability Reporting Directive (CSRD) wird eine verbindliche Nachhaltigkeitsberichterstattung bei großen Kapitalgesellschaften und bei kapitalmarktorientierten kleinen und mittelgroßen Kapitalgesellschaften eingeführt. In Zukunft werden auch zahlreiche kleine und mittelgroße Unternehmen mittelbar zur Nachhaltigkeitsberichterstattung verpflichtet. In diesem Zusammenhang veröffentlichte die European Financial Reporting Advisory Group (EFRAG) im Januar 2024 einen Konsultationsentwurf eines Standards für die freiwillige Nachhaltigkeitsberichterstattung nicht-kapitalmarktorientierter KMU (VSME ESRS ED). Der vorliegende Beitrag stellt den Inhalt dieses Standards vor und würdigt ihn aus konzeptionellen und anwendungsorientierten Gesichtspunkten.}},
  author       = {{Stawinoga, Martin and Pasch, Lilia}},
  booktitle    = {{Zeitschrift für Corporate Governance}},
  issn         = {{1868-7792}},
  number       = {{4}},
  pages        = {{180--185}},
  publisher    = {{Erich Schmidt Verlag}},
  title        = {{{Standardentwurf zur freiwilligen Nachhaltigkeitsberichterstattung von KMU – Eine Analyse des VSME ESRS Konsultationsentwurfs}}},
  doi          = {{10.37307/j.1868-7792.2024.04.08}},
  year         = {{2024}},
}

@misc{11898,
  author       = {{Fiss, Maximilian}},
  keywords     = {{Branding, EDM, Elektronische Musik, Cover Art, Cover Art Maskottchen}},
  pages        = {{122}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Human Branding im Genre EDM}}},
  year         = {{2024}},
}

@misc{11902,
  author       = {{Bauer, Dustin}},
  pages        = {{51}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Ursprung und Bedeutung des Aspect Ratios in der Kinematographie}}},
  year         = {{2024}},
}

@misc{11909,
  author       = {{Tholen, Janna and Bruns, Michael and Upmann, Matthias}},
  booktitle    = {{Rundschau für Fleischhygiene und Lebensmittelüberwachung (RFL)}},
  issn         = {{0178-2010 }},
  number       = {{9}},
  pages        = {{302--304}},
  publisher    = {{M.& H. Schaper GmbH}},
  title        = {{{Einfluss der Automatisierung des Enddarmbohrers auf den dorsalen Kontaminationsanteil bei der Schweineschlachtung}}},
  volume       = {{76}},
  year         = {{2024}},
}

@misc{11910,
  abstract     = {{Im Rahmen der Podiumsdiskussion wurden 24 aktuelle Fragestellungen aus der lebensmittelrechtlichen Praxis erörtert, deren Beantwortung in dieser und den folgenden Ausgaben der FLEISCHWIRTSCHAFT zusammenfassend dargestellt wird.}},
  author       = {{Upmann, Matthias and Weyland, Gerd}},
  booktitle    = {{Fleischwirtschaft}},
  issn         = {{0015-363X }},
  number       = {{9}},
  pages        = {{14--21}},
  publisher    = {{Deutscher Fachverlag}},
  title        = {{{Antworten zum Lebensmittelrecht Was ist erlaubt, was verboten? 19. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost – 1. Teil}}},
  volume       = {{104}},
  year         = {{2024}},
}

@misc{11911,
  abstract     = {{Im Herbst 2021 wurden 627 Schweineschlachtkörper verschiedener Hybridrassen mit einem durchschnittlichen Schlachtgewicht von  etwa 95 kg mit visuell erfassbaren Kontaminationen nach der Eviszeration in einem industriellen Schlachthof im Nordwesten Deutschlands untersucht. Die Datenaufnahme erfolgte direkt an der Schlachtlinie zwischen der Eviszeration und dem Podest für die amtliche Fleischuntersuchung. Zwei geschulte Personen prüften die ausgenommenen, aber noch nicht gespaltenen Tierkörper visuell von kranial nach kaudal: Eine Person beurteilte die Bauch-, die andere die Rückenseite. Festgestellte Kontaminationen waren Darminhalt, Galle, Mageninhalt, Rohrbahnfett und „Sonstiges“ – vor allem ein rötlicher Schaum aus den Atemwegen. Für jede Kontaminationsart wurde deren flächenmäßige Ausdehnung und Lokalisation erfasst. Bei insgesamt 103 der 627 kontaminierten Tiere wurde mehr als eine Kontamination festgestellt, sodass insgesamt 754 Kontaminationen detektiert wurden. Etwa die Hälfte der Kontaminationen war auf Darminhalt zurückzuführen, ein Drittel auf „Sonstiges“. Bei der Lokalisation machten Vordergliedmaße, Rücken und Schinken zusammen 70% aus. 86% der Kontaminationen hatten einen kleineren Durchmesser als 23 mm. Die Erfassung der visuell detektierbaren Kontaminationen stellt die Grundlage für weitergehende Untersuchungen zur hygienischen Qualitätsverbesserung der Schlachtprozesse dar.}},
  author       = {{Tholen, Janna and Große-Kleimann, Julia and Schulze Althoff, Gereon and Kreienbrock, Lothar and Upmann, Matthias}},
  booktitle    = {{Fleischwirtschaft}},
  issn         = {{0015-363X}},
  number       = {{4}},
  pages        = {{71--76}},
  publisher    = {{Deutscher Fachverlag}},
  title        = {{{Ausdehnung und Lokalisationen diverser Kontaminationsarten auf industriell geschlachteten Schweinekörpern}}},
  volume       = {{104}},
  year         = {{2024}},
}

@misc{11912,
  author       = {{Tholen, Janna and Upmann, Matthias}},
  booktitle    = {{Journal of Food Safety and Food Quality}},
  issn         = {{0003-925X}},
  number       = {{6}},
  pages        = {{156--160}},
  publisher    = {{M. & H. Schaper}},
  title        = {{{Einfluss eines Hygiene-Rückmeldesystems während der Schweineschlachtung auf die Häufigkeit auftretender Schlachtkörperverunreinigungen}}},
  doi          = {{10.53194/0003-925X-75-156}},
  volume       = {{75}},
  year         = {{2024}},
}

@misc{11913,
  author       = {{Tscherkaschin, Alina Nina}},
  pages        = {{43}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Filterblasen auf Social Media - Die Auswirkungen der algorithmischen Personalisierung auf TikTok auf die Meinungsbildung von Jugendlichen}}},
  year         = {{2024}},
}

@misc{11915,
  abstract     = {{With the human factor being identified as the weakest link in the chain of information security, we investigate the effects of the COVID-19 pandemic on approaches to develop awareness trainings. Following the literature approach of vom Brocke, we identify five focus areas in recent literature which we are able to divide further into supporting effects and human factors for information security awareness trainings. Furthermore, we identify research gaps in current literature which can inspire future investigations.}},
  author       = {{Meister, Robin and Guhr, Nadine}},
  booktitle    = {{Wirtschaftsinformatik 2024 Proceedings}},
  keywords     = {{Information Security, Literature Review, Human Factor, Education, Awareness}},
  location     = {{Würzburg}},
  pages        = {{16}},
  publisher    = {{WI}},
  title        = {{{Recent Insights in Information Security Awareness Training: A Systematic Literature Review }}},
  year         = {{2024}},
}

@misc{11917,
  author       = {{Pavkovic, Niklas}},
  pages        = {{37}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Die Bedeutung der K.I.-generierten Berichterstattung im Amateurfußball }}},
  year         = {{2024}},
}

@misc{11920,
  author       = {{Gora, Clarissa}},
  pages        = {{99 }},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Male Gaze : Wie der männliche Blick in Film und Fernsehen unterbewusst Sehstrukturen definiert und wie sich diese auf die Gesellschaft auswirken}}},
  year         = {{2024}},
}

@book{11926,
  author       = {{Köhler, Martin}},
  isbn         = {{978-3-86446-390-7}},
  pages        = {{21}},
  publisher    = {{Forschungsgesellschaft für Straßen- und Verkehrswesen e. V. }},
  title        = {{{Merkblatt für Bankettbefestigungen mit vorgefertigten Befestigungslementen = M BB}}},
  volume       = {{625. R 2}},
  year         = {{2024}},
}

@misc{11928,
  abstract     = {{Im Rahmen der Voruntersuchung des Erprobungs- und Entwicklungsvorhabens „Grüne Infrastruktur in ländlichen Regionen“ (im Folgenden „E+E-Vorhaben“ genannt) wurde eine Analyse der Erholungsfunktion der Landschaft im Kreis Lippe durchgeführt, bei welcher das räumliche Verhältnis des Erholungspotenzials, welches maßgeblich durch die ästhetische Qualität der Landschaft geprägt wird, gegenüber der Erholungsnachfrage, d. h. dem Naherholungsdruck, untersucht worden ist. Dazu wurden GIS-gestützte Modelle und Analysemethoden entwickelt und angewandt, wobei die Programme „ArcMap“ und „ArcGIS Pro“ sowie „ArcGIS Online“ verwendet wurden.

Für die Analyse des Erholungspotenzials wurde zunächst der ästhetische Gesamtwert der Landschaft ermittelt, wobei ein modifizierter AIGILaP-Ansatz [1,2,3] angewandt wurde. Weiterhin wurde die Erholungsinfrastruktur untersucht, sodass sich die Bewertung des Erholungspotenzials aus der Aggregation der Bewertungen des ästhetischen Gesamtwertes einerseits und der Erholungsinfrastruktur andererseits ergab. Zur Ermittlung der Erholungsnachfrage wurden Erreichbarkeitsanalysen für verschiedene Verkehrsmittel (Fahrrad, Elektrofahrrad, Fußgänger, PKW) durchgeführt. Das Erholungspotenzial und die Erholungsnachfrage wurden abschließend überlagert, sodass prioritäre Räume der Erholung im Kreis Lippe identifiziert werden konnten.

Die Nutzung von GIS-basierten Modellen und Analysemethoden ermöglichte die detaillierte Analyse der Erholung im Kreis Lippe, wobei verschiedene Datenbestände mit unterschiedlichem Detaillierungsgrad verwendet wurden. Dabei erwies sich die rasterbasierte Herangehensweise als sehr effizient, da diese u. a. die Harmonisierung der Datensätze vereinfachte. Von besonderer Bedeutung war zudem die grafische Überlagerung der Ergebnisse des Erholungspotenzials und der Erholungsnachfrage, welche die Identifizierung der prioritären Räume der Erholung ermöglichte. Die Ableitung dieser Räume war für das weitere Vorgehen im Projekt maßgeblich, da in der im Anschluss an die Analyse erfolgten Synthese die prioritären Räume der Themenschwerpunkte Biotopverbund, Kulturlandschaft und Erholung überlagert und räumlich-sachliche Verbindungen, Synergien und Konflikte identifiziert wurden.}},
  author       = {{Behre, Evelyn and Stemmer, Boris}},
  booktitle    = {{Umweltinformationssysteme - Digitalisierung im Zeichen des Klimawandels und der Energiewende (UIS 2023) }},
  editor       = {{Fuchs-Kittowski, Frank and Abecker, Andreas and Hosenfeld, Fridel and Reineke, Anja and Jolk, Christian}},
  isbn         = {{978-3-658-43734-3}},
  keywords     = {{GIS, Erholungsfunktion, Erholungspotenzial, Erholungsnachfrage, Naherholung, Grüne Infrastruktur}},
  location     = {{Höxter}},
  pages        = {{81--102}},
  publisher    = {{Springer Fachmedien Wiesbaden}},
  title        = {{{Nutzung von Geoinformationssystemen bei der Analyse des Erholungswertes der Landschaft im Kreis Lippe}}},
  doi          = {{10.1007/978-3-658-43735-0_6}},
  year         = {{2024}},
}

@misc{11929,
  abstract     = {{Starkregenereignisse haben das Potenzial, erhebliche Mengen organischen Materials mit sich zu tragen, und können dadurch für enormen Schlammeintrag und Wassermassen in der Talsohle sorgen. Mit dem Wissen, wo Oberflächenabfluss entsteht und welche Faktoren einen Einfluss auf die Abflussbildung haben, können Maßnahmen geplant werden, die eine Sturzflut noch vor dem Entstehen verhindern oder zumindest abmildern. Für flächendeckende Analysen ist eine entsprechende Datenbasis notwendig. Als relevante Einflussparameter wurden anhand der Literatur folgende Informationen ausgewählt: Klima, Relief, Bodenkunde, Geologie, Landnutzung, Bodenverdeckung und Oberflächenverschlämmung sowie Bodenbearbeitungs(-systeme). Für diese Schlagworte wurde eine Datenrecherche hinsichtlich Verfügbarkeit und Qualität für die Bundesländer Nordrhein-Westfalen (NRW) und Niedersachsen (NDS) durchgeführt. Die Datenrecherche hat ergeben, dass flächendeckend eine Vielzahl an nützlichen Geodaten − vor allem für landwirtschaftliche Flächen − vorhanden sind. Die Informationslage kann dabei zum Zeitpunkt der Recherche in NRW insgesamt als besser bewertet werden. Es wurden nicht nur mehr Datensätze gefunden, sondern teilweise auch solche, die im Vergleich zu NDS deutlich detaillierter sind. Bezüglich der direkten Verfügbarkeit als Download oder Webdienst wurde festgestellt, dass in NDS die Mehrheit der Datensätze zum Zeitpunkt der Recherche nur auf Anfrage und verbunden mit Gebühren erhältlich sind.}},
  author       = {{Pilar von Pilchau, Katharina and Maas, Klaus and Weber, Verena}},
  booktitle    = {{Umweltinformationssysteme - Digitalisierung im Zeichen des Klimawandels und der Energiewende (UIS 2023)}},
  editor       = {{Fuchs-Kittowski, Frank and Abecker, Andreas and Hosenfeld, Friedhelm and Reineke, Anja and Jolk, Christian}},
  isbn         = {{978-3-658-43734-3}},
  keywords     = {{Starkregen, OpenData, Fließwege, Dominant Runoff Process, Ländlicher Raum}},
  location     = {{Höxter}},
  pages        = {{155--166}},
  publisher    = {{Springer Fachmedien Wiesbaden}},
  title        = {{{Verfügbarkeit, Qualität und Informationsgehalt von Geodaten für eine Fließweganalyse im Kontext Starkregen im ländlich geprägten Raum}}},
  doi          = {{10.1007/978-3-658-43735-0_11}},
  year         = {{2024}},
}

@misc{11931,
  author       = {{Kölbel, Carolin}},
  pages        = {{56}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Was macht ein erfolgreiches B2B-Social-Media-Marketing aus? – Strategien, Maßnahmen und Umsetzung mit der Entwicklung eines Guides am Beispiel Instagram}}},
  year         = {{2024}},
}

@misc{11934,
  abstract     = {{The application of hydrogen in order to store energy and as a vehicle fuel requires efficient and effective storage technologies. An alternative solution to cryogenic and high pressure tanks is the use of porous material and physisorption (carbons, metal organic frameworks) or chemisorption (hydrides) in the tank. Due to the heat of sorption the temperature and its distribution in the tank might vary significantly during charging and discharging, affecting the storage capacity. The flow of the hydrogen in the tank is described by the equation of mass conservation, the Navier-Stokes equations and the equation of energy conservation as implemented in a CFD code. In the conservation equation additional terms are implemented in order to account for the amount of hydrogen involved in the sorption and the corresponding heat of sorption. These result from the mass and energy balance for the hydrogen in a finite volume whereat the equilibrium is described by an appropriate sorption isotherm. The use of data driven models is often computationally more advantageous then physical models. Based on the physical adsorption model a data driven model is derived using different machine learning techniques. This model is implemented as source terms in the governing equations, leading to a computationally more advantageous formulation. Thus the distribution of temperature and concentration during charging and discharging of the tanks is computed and limiting phenomena are identified.}},
  author       = {{Klepp, Georg Heinrich and Filippi, Markus and Langer, Guido}},
  booktitle    = {{	 Advances in Computational Heat and Mass Transfer : Proceedings of the 14th International Conference on Computational Heat and Mass Transfer (ICCHMT 2023), 4-8 September, 2023, Düsseldorf, Germany, Volume 1 }},
  editor       = {{Benin, Ali Cemal and Bennacer, Rachid  and Mohamad, Abdulmajeed A.  and Ocłoń, Paweł  and Suh, Sang-Ho  and Taler, Jan }},
  location     = {{Düsseldorf}},
  pages        = {{480 -- 488}},
  publisher    = {{Springer}},
  title        = {{{Charging and Discharging of Hydrogen Sorption Tanks}}},
  doi          = {{10.1007/978-3-031-67241-5_43}},
  year         = {{2024}},
}

@misc{11940,
  abstract     = {{Bildungsbereiche – etwa der akademische Bereich, der schulische Bildungsbereich oder der Bereich der sog. IHK-Weiterbildung – sind im deutschen Bildungssystem traditionell wenig vernetzt. Mit den Bildungsbereichen verbunden sind Lernorte. Für eine attraktive Berufsbildung kann eine gelingende Kooperation von beruflichen Schulen, betrieblicher Bildung einschließlich überbetrieblicher Bildung, Hochschule oder Akademien als essenziell angenommen werden. Ein Workshop der HTBB 2023 greift die Vernetzung dieser Bildungsbereiche und Lernorte vor dem Hintergrund zweier InnoVET-Projekte, Bildungsbrücken OWL und BIRD, auf.
Der vorliegende Beitrag bietet einen Überblick über die auf der Tagung präsentierten Vernetzungsansätze und Handlungsfelder und nimmt Bezug auf die Projekterfahrungen und auf die Ergebnisse aus dem Tagungsworkshop. Konkret beschäftigt er sich mit der bereichsübergreifenden Bedarfserhebung als Ausgangslage für die Fortbildung zur „Geprüften Berufsspezialistin“ bzw. zum „Geprüften Berufs-spezialisten“ (BIRD), der Konzeption eines Instruments zur Gestaltung bildungsbereichsübergreifender Orientierungsangebote (BIRD), den Herausforderungen und Gestaltungsansätzen bildungsbereichs-übergreifender didaktischer Planungen (BIRD), der Evaluation bildungsbereichsübergreifender Bildungsangebote im Blended-Learning-Design (BIRD) und (5) den Gelingensbedingungen für eine bildungsbereichsübergreifende Vernetzung für gemeinsame Bildungsformate (Bildungsbrücken OWL). Der Beitrag schließt mit einem gemeinsamen Fazit und Ausblick.}},
  author       = {{Hager, Anna and Müller, Franziska and Renner, Moritz and Schächtner, Stefanie and Schneider, Birgit and Thies, Katharina}},
  booktitle    = {{Berufs- und Wirtschaftspädagogik Online : bwp@}},
  issn         = {{1618-8543}},
  keywords     = {{Bildungsbereichsübergreifende Kooperation, Vernetzung, berufliche Bildung, Qualifizierung, bereichsübergreifende Bildungsangebote}},
  location     = {{Bamberg}},
  number       = {{Teil 4}},
  publisher    = {{Institut für Berufs- und Wirtschaftspädagogik Universität Hamburg }},
  title        = {{{Exzellente Qualifizierung durch bildungsbereichsübergreifende Vernetzung: Erfahrungen und Konzepte aus den InnoVET-Projekten BIRD und Bildungsbrücken OWL}}},
  volume       = {{Spezial HT2023}},
  year         = {{2024}},
}

@misc{11954,
  abstract     = {{Die vorliegende Arbeit untersucht den Einfluss von visuellen und auditiven Inhalten in TikTok Videos auf die Kaufabsichten der Generation Z. Die Forschung soll die ausschlaggebenden Elemente und deren Wirkung auf die Kaufentschei-dungen in TikTok Videos identifizieren. Sie basiert auf einer ausführlichen Literatur-recherche, die, die Wirkung verschiedener Komponenten wie Musik, visuelle Ef-fekte und der sprechenden Person analysiert. Die Analyse zeigt, dass besonders Musik und visuelle Effekte eine signifikante Rolle bei der Beeinflussung der Kauf-entscheidungen spielen. Darüber hinaus sind die Authentizität des Influencers und die Kürze der Videos entscheidende Faktoren für eine positive Kaufabsicht. Diese Ergebnisse geben wertvolle Einblicke für Marketer und Unternehmen, die ihre Werbestrategien auf TikTok gezielt verbessern möchten. Die Arbeit liefert so-mit wichtige Erkenntnisse für die Entwicklung effektiver Marketingstrategien für die Plattform und trägt zur aktuellen Forschung im Bereich des Affiliate-Marke-tings und der Medienwirkung bei. }},
  author       = {{Diekmann, Greta}},
  pages        = {{41}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Medieninhalte und Kaufverhalten : Inwiefern beeinflussen visuelle und auditive Inhalte in TikTok-Videos  die Kaufabsichten von Generation Z in Bezug auf Lifestyle-Produkte?}}},
  year         = {{2024}},
}

@misc{11963,
  author       = {{Kindler, Jann}},
  pages        = {{214}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Der IT-Faktor bei Influencer:innen über das Generieren von Wachstum durch Zuschauer- und Followerinteraktion}}},
  year         = {{2024}},
}

@misc{11967,
  author       = {{Siquilini, Jeremy}},
  pages        = {{50}},
  publisher    = {{Technische Hoschschule Ostwestfalen-Lippe}},
  title        = {{{Die Effektivität des mobilen Journalismus: Mobile Berichterstattung und Auswirkungen auf den Workflow und die Qualität der journalistischen Arbeit}}},
  year         = {{2024}},
}

@inbook{11969,
  abstract     = {{Für eine exzellente berufliche Bildung sind Kooperationen zwischen den Lernorten der beruflichen Bildung, sowie Kooperationen mit der akademischen Bildung grundlegend. Die Ermöglichung neuer Lernortkooperationen ist Teil des InnoVET-Projekts Bildungsbrücken OWL. 
Um das Lehrenden-Matchmaking als Grundlage für neue Lernortkooperationen zu unterstützen, ist im Projekt ein Zielgruppen-Matrixtool entwickelt worden. Das Tool schafft eine Übersicht über die zentralen Handlungsbedingungen der Lehrpersonen an den verschiedenen Lernorten. In der Planungsphase von Lernortkooperationen lassen sich mit der Matrix Zielstellungen und Rahmenbedingungen der jeweiligen Lernorte gegenüberstellen. Gelingensbedingungen können verdeutlicht werden, Stolpersteine lassen sich im laufenden Prozess aufdecken und können aus dem Weg geräumt werden, um ein Scheitern der Realisierung zu verhindern. }},
  author       = {{Meyer, Kirsten and Schneider, Birgit and Claes, Svenja}},
  booktitle    = {{Screts unLOKed : Gemeinsam stark für Azubis - (Digitale) Erfolgsstrategien für Lehrkräfte und Ausbildende in der LernOrtKooperation}},
  editor       = {{Medvedieva, Tetiana and Tänzel, Marit}},
  pages        = {{51}},
  publisher    = {{InnoVET-Projekt „Bottom-Up statt Top-Down – Fachkarrieren neu gedacht“}},
  title        = {{{InnoVET-Projekt Bildungsbrücken OWL : Lehrenden-Matchmaking als Grundlage für Lernortkooperation – ein Zielgruppen-Matrixtool}}},
  year         = {{2024}},
}

@misc{11972,
  abstract     = {{As companies increasingly adopt software applications to improve business efficiency, often digitization gaps arise when legacy systems fail to integrate with new applications. These gaps often result in redundant task execution across incompatible systems. Robotic Process Automation (RPA) emerges as a solution by automating such tasks. However, selecting the right processes that will be subjected to RPA is crucial to avoid failures and resource waste. Therefore, this paper introduces a four-stage method to evaluate processes for RPA suitability, grounded on the Analytic Hierarchy Process (AHP). By systematically analyzing scientific literature and incorporating weights from RPA experts, this paper sheds light on the complex nature of process selection criteria for RPA. Tested in a company, the method facilitates the process selection, indicating its practical applicability.}},
  author       = {{Meyer, Frederic and Hinrichsen, Sven and Padoano, Elio}},
  booktitle    = {{Human Systems Engineering and Design (IHSED2024): Future Trends and Applications}},
  editor       = {{Ahram, Tareq  and Karwowski, Waldemar  and Etinger, Darko  and Mijač, Tea }},
  isbn         = {{978-1-964867-34-2}},
  issn         = {{2771-0718}},
  keywords     = {{Analytic Hierarchy Process (AHP), Evaluation Method, MCDM, Robotic Process Automation (RPA), Selection Criteria, Systematic Literature Review (SLR)}},
  location     = {{Split}},
  publisher    = {{AHFE International}},
  title        = {{{A Structured Method for the Selection of Business Processes Suitable for Robotic Process Automation}}},
  doi          = {{10.54941/ahfe1005524}},
  volume       = {{158}},
  year         = {{2024}},
}

@misc{11973,
  author       = {{Oexmann, Sarah}},
  pages        = {{155}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{TWINS - Konzeption und Umsetzung eines Kartenspiels unter Betrachtung des Zusammenhangs zwischen Hand und Gedächtnis}}},
  year         = {{2024}},
}

@misc{11977,
  abstract     = {{Additive manufacturing of lenses offers quick prototyping and characterization. This paper explains the additive manufacturing and characterization of axicon lenses using TOPAS material for Terahertz sensing applications. The beam patterns of additively manufactured axicon lens prototypes are characterized around 0.3 THz with silicon-based THz-camera to evaluate the depth of focus.}},
  author       = {{Shrotri, Abhijeet Narendra and Krause, Benedikt and Stübbe, Oliver and Pfeiffer, Ullrich and Preu, Sascha}},
  booktitle    = {{2024 49th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)}},
  issn         = {{2162-2035}},
  keywords     = {{Additives, Prototypes, Three-dimensional printing, Sensors, Lenses}},
  location     = {{Perth, Australia }},
  publisher    = {{IEEE}},
  title        = {{{Evaluation of Additively Manufactured Axicon Lenses Using a THz-Camera}}},
  doi          = {{10.1109/irmmw-thz60956.2024.10697740}},
  volume       = {{2024}},
  year         = {{2024}},
}

@misc{11978,
  author       = {{Gossen, Arthur and Katsch, Linda and Meyer, Mandy Isabel and Zimmer, Manuel and Bator, Martyna and Darvishi, Masoumeh and Holst, Christoph-Alexander and Lohweg, Volker and Schneider, Jan}},
  location     = {{Lemgo}},
  title        = {{{FoodLifeTimeTracking: Datengetriebene dynamische Haltbarkeitsvorhersage von Erfrischungsgetränken}}},
  year         = {{2024}},
}

@misc{11981,
  author       = {{Katsch, Linda and Gossen, Arthur and Bator, Martyna and Schneider, Jan}},
  location     = {{Bruges}},
  title        = {{{Shelf life prediction of beverage bases with multivariate accelerated shelf life testing}}},
  year         = {{2024}},
}

@misc{11985,
  abstract     = {{ Die vorliegende Offenbarung betrifft ein Verfahren zur Temperaturprognose und/oder Wärmebedarfsprognose eines Gebäudes, umfassend Bereitstellen einer gemessenen Innentemperatur in dem Gebäude; Bereitstellen einer Außentemperatur in Umgebung des Gebäudes; Bereitstellen einer in das Gebäude eingebrachten Wärmemenge; Bereitstellen eines thermischen Modells des Gebäudes, wobei das thermische Modell die folgenden drei Modellparameter aufweist: einen Wärmewiderstand für einen Wärmeübergang von innerhalb des Gebäudes nach außerhalb des Gebäudes; einen Koeffizienten zur Beschreibung eines solaren Wärmeeintrags, und eine Wärmespeicherkapazität des Gebäudes. Das Verfahren umfasst einen Schritt des Anpassens der Modellparameter des thermischen Modells, derart, dass das thermische Modell den Zusammenhang zwischen Innentemperatur, Außentemperatur und Wärmemenge approximiert. }},
  author       = {{Bast, Oliver and Bollhöfer, Fynn Christian and Franzen, Lion and Knoop, Michael and Üpping, Johannes}},
  pages        = {{29}},
  title        = {{{Verfahren zur Temperaturprognose und/oder Wärmebedarfsprognose eines Gebäudes und Wärmepumpe}}},
  year         = {{2024}},
}

@misc{11987,
  author       = {{Harte, Tim}},
  pages        = {{39}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{BEGLEITUNG EINES BRETTSPIELS VON KONZEPTION BIS PRODUKTION}}},
  year         = {{2024}},
}

@misc{11990,
  author       = {{Struck, Susanne}},
  location     = {{Lemgo}},
  title        = {{{Proteinbasierte Lebensmittel: Synergien zwischen pflanzlichen und tierischen Proteinen in Forschung und Lehre}}},
  year         = {{2024}},
}

@misc{11991,
  author       = {{Morejón Caraballo, Sophie and Trültzsch, Stephanie and Rohm, Harald and Struck, Susanne}},
  location     = {{Lemgo}},
  title        = {{{Trockenfraktionierung von Sonnenblumenpresskuchen zur Proteinanreicherung}}},
  year         = {{2024}},
}

@misc{11992,
  author       = {{Morejón Caraballo, Sophie and Rohm, Harald and Struck, Susanne}},
  location     = {{Lemgo}},
  title        = {{{Aufwertung von Nebenprodukten der Öl- und Käseherstellung mittels Fermentation}}},
  year         = {{2024}},
}

@misc{11993,
  author       = {{Sert Tuncer, Deniz and Struck, Susanne and Rohm, Harald}},
  location     = {{Apeldoorn, NL}},
  title        = {{{A new approach to mayonnaise: a low fat vegan variant enriched with pumpkin seed press cake derived protein isolate}}},
  year         = {{2024}},
}

@misc{11994,
  author       = {{Gossen, Arthur and Katsch, Linda and Zimmer, Manuel and Bator, Martyna and Lohweg, Volker and Schneider, Jan}},
  location     = {{Köln}},
  title        = {{{FoodLifeTimeTracking: Use of multimodal information fusion for the realisation of a monitoring device and a life cycle simulator for the investigation and quantification of quality-determining parameters and the shelf life of food and its ingredients}}},
  year         = {{2024}},
}

@misc{11996,
  author       = {{Katsch, Linda and Trilling-Haasler, Marc and Pein-Hackelbusch, Miriam and Schneider, Jan}},
  location     = {{Köln}},
  title        = {{{PETauthent – Authentication of PET recyclate for food packaging using data-intensive sensors and machine learning methods}}},
  year         = {{2024}},
}

@misc{11997,
  abstract     = {{In Germany, individuals unable or not yet able to return to the general labor market due to disabilities are employed in sheltered workshops which are called WfbM (“Werkstätten für behinderte Menschen”). These organizations are required to earn the wages for the aforementioned group of people by offering market services. These services include, in particular, assembly activities. However, WfbM face the challenge that customer orders tend to become more complex, especially as a result of an increased number of product variants. This development not only has an impact on the work in WfbM, but also makes it much more difficult to achieve the desired inclusion of people with disabilities in the general labor market. Bearing this in mind, the research question addressed in this article can be stated as such: How far can the use of an informational assistance system compensate for performance deficits of people with disabilities in the context of assembly? The results of the conducted laboratory study show that the implementation of an assistance system can help to reduce existing barriers and challenges resulting from the mismatch between requirements of the general labor market and the performance characteristics of people with cognitive impairments.
Practical Relevance: For people with disabilities, the use of assistance systems opens up new opportunities for participation in the general labor market and thus makes an important contribution to implementing the requirements of the “Bundesteilhabegesetz” (a law to strengthen participation of people with disabilities in Germany).}},
  author       = {{Bendzioch, Sven and Hinrichsen, Sven}},
  booktitle    = {{Zeitschrift für Arbeitswissenschaft (ZfA)}},
  issn         = {{2366-4681}},
  keywords     = {{Informational Assistance System, People with Disabilities, Manual Assembly, Image Processing System, Laboratory Study}},
  number       = {{2}},
  pages        = {{240--253}},
  publisher    = {{Springer-Verlag GmbH }},
  title        = {{{Potentials of an informational assembly assistance system for persons with cognitive disabilities — Results of a laboratory study}}},
  doi          = {{10.1007/s41449-024-00414-9}},
  volume       = {{78}},
  year         = {{2024}},
}

@misc{12002,
  abstract     = {{Organisation und Moderation des Blocks B4 "Baurecht und Baubetrieb"}},
  author       = {{Noosten, Dirk}},
  booktitle    = {{17. Europäischer Kongress (EBH 2023) - Effizientes Bauen mit Holz im urbanen Raum}},
  location     = {{Köln}},
  title        = {{{Baurecht und Baubetrieb}}},
  year         = {{2024}},
}

@misc{12008,
  author       = {{Cepin, Simon and Borcherding, Holger}},
  booktitle    = {{PCIM Europe 2024; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management}},
  isbn         = {{978-3-8007-6262-0}},
  location     = {{Nürnberg}},
  pages        = {{PP010}},
  publisher    = {{VDE}},
  title        = {{{Integration of CFD Simulation Results in PLECS Using Lookup Tables}}},
  year         = {{2024}},
}

@misc{12009,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>Traditional work models often need more flexibility and time autonomy for employees, especially in manufacturing. Quantitative approaches and Artificial Intelligence (AI) applications offer the potential to improve work design. However, current research does not entirely focus on human-centric criteria that enable time autonomy. This paper addresses this gap by developing a set of criteria to evaluate intelligent personnel planning approaches based on their ability to enhance time autonomy for employees. Existing quantitative approaches are not sufficient to fully integrate the developed criteria.</jats:p><jats:p>Consequently, a novel model approach is proposed in an attempt to bridge the gap between current practices and the newly developed criteria. This two-stage planning approach fosters democratization of time autonomy on the shopfloor, moving beyond traditional top-down scheduling. The paper concludes by outlining the implementation process and discusses future developments with respect to AI for this model approach.</jats:p><jats:p><jats:italic>Practical Relevance</jats:italic>: In order to make working conditions on the shopfloor in high-wage countries more attractive, an alternative organization of shift work is needed. Intelligent planning approaches that combine traditional operations research methods with artificial intelligence approaches can democratize shift organization regarding time autonomy. Planning that takes both employee and employer preferences into account in a balanced way will strengthen the long-term competitiveness of manufacturing companies in high-wage countries and counteract the shortage of skilled labor.</jats:p>}},
  author       = {{Latos, Benedikt and Buckhorst, Armin and Kalantar, Peyman and Bentler, Dominik and Gabriel, Stefan and Dumitrescu, Roman and Minge, Michael and Steinmann, Barbara and Guhr, Nadine}},
  booktitle    = {{Zeitschrift für Arbeitswissenschaft}},
  issn         = {{2366-4681}},
  keywords     = {{Personnel Planning, Time Autonomy, Human-Centric Optimization, Artificial Intelligence, Manufacturing}},
  number       = {{3}},
  pages        = {{277--298}},
  publisher    = {{Springer-Verlag GmbH}},
  title        = {{{Time autonomy in personnel planning: Requirements and solution approaches in the context of intelligent scheduling from a holistic organizational perspective }}},
  doi          = {{10.1007/s41449-024-00432-7}},
  volume       = {{78}},
  year         = {{2024}},
}

@misc{12013,
  author       = {{Trilling-Haasler, Marc and Katsch, Linda and Fahmi, Amir and Pein-Hackelbusch, Miriam and Schneider, Jan}},
  location     = {{Lemgo}},
  title        = {{{Der rPET Gehalt in Flaschen - eine Frage des Glaubens? }}},
  year         = {{2024}},
}

@book{12014,
  abstract     = {{Holy Shit ist ein Testverfahren, bei dem du herausfinden wirst, ob du für die bevorstehenden ökologischen Herausforderungen bereit bist. Mit diesem Test wird sich deine Beziehung zu dem, was du konsumierst, dein Verständnis für das, was du bist und vor allem ‘was du von dir gibst’, grundlegend verändern. Du wirst erkennen, dass du ein elementarer Bestandteil eines Ökosystems bist.}},
  author       = {{Ziegler, Ella and Lehmann, Johannes and Felmeden, Jörg}},
  isbn         = {{979-8-9911251-1-6}},
  publisher    = {{Soil Factory Pres}},
  title        = {{{HOLY SHIT —  Are you ready for the ecological revolution?}}},
  year         = {{2024}},
}

@book{12017,
  abstract     = {{Holy Shit ist ein Testverfahren, bei dem du herausfinden wirst, ob du für die bevorstehenden ökologischen Herausforderungen bereit bist. Mit diesem Test wird sich deine Beziehung zu dem, was du konsumierst, dein Verständnis für das, was du bist und vor allem ‘was du von dir gibst’, grundlegend verändern. Du wirst erkennen, dass du ein elementarer Bestandteil eines Ökosystems bist.}},
  author       = {{Ziegler, Ella and Lehmann, Johannes and Felmeden, Jörg}},
  isbn         = {{978-3-910240-01-8}},
  pages        = {{27}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{HOLY SHIT — Bist Du bereit für die ökologische Revolution?}}},
  year         = {{2024}},
}

@misc{12019,
  author       = {{Schwarzer, Knut and Wilhelm, Patrick and Müller, Ulrich}},
  keywords     = {{Datenbanken, Text Mining, Entkeimung, KI, Pasteurisierung, D-Wert, LDzBase}},
  location     = {{Lemgo}},
  title        = {{{Text Mining als Werkzeug für die automatisierte Datensammlung in wissenschaftlichen Datenbanken am Beispiel der ‚Lemgo D- and z-value Database for Food‘}}},
  year         = {{2024}},
}

@misc{12020,
  author       = {{Schwarzer, Knut and Schneider, Jan and Müller, Ulrich}},
  keywords     = {{Getränke, Pasteurisation, Nachhaltigkeit, KZE, Tunnelpasteur, LDzBase}},
  location     = {{Lemgo}},
  title        = {{{Getränkepasteurisation neu gedacht – Sicherheit, Qualität, Nachhaltigkeit}}},
  year         = {{2024}},
}

@misc{12021,
  author       = {{Segermann, Jan and Luttmann, Mario and Blome, André and Feldt, Sebastian and Sivanesan, Sujee and Holst, Christoph-Alexander and Lohweg, Volker and Frahm, Björn and Müller, Ulrich}},
  keywords     = {{sourdough, fermentation, near-infrared spectroscopy, support vector machine}},
  location     = {{Lemgo}},
  title        = {{{Die Rolle von ML-Modellen in der Lebensmitteltechnologie: Eine Fallstudie zur Sauerteigfermentation mit NIR-Spektroskopie}}},
  year         = {{2024}},
}

@misc{12022,
  author       = {{Luttmann, Mario and Blome, André and Segermann, Jan and Jekle, Mario and Frahm, Björn and Müller, Ulrich}},
  keywords     = {{colorimetry, photogrammetry, wheat rolls, crust colour, 3D analysis}},
  location     = {{Lemgo}},
  title        = {{{Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen}}},
  year         = {{2024}},
}

@misc{12023,
  author       = {{Müller, Ulrich and Ibrahem, Riham and Al Krad, Majed and Schwarzer, Knut and Wilhelm, Patrick}},
  keywords     = {{steam sterilization, dried plants, wet plants, decontamination, active substances}},
  location     = {{Lemgo}},
  title        = {{{Das Lemgoer Mechanische Sattdampfverfahren für pflanzliche Materialien – Retrospektive und neue Erfahrungen}}},
  year         = {{2024}},
}

@misc{12024,
  author       = {{Ibrahem, Riham and Barakat, Bayan and Suliman, Mendana and Shekh Mousa, Ayman and Latta, Mohammed Ismael and Bekonda, Euphinette Amba and Schwarzer, Knut and Müller, Ulrich}},
  keywords     = {{essential oil, mint plants, stability of glandular, steam distillation, vacuum, temperature impact, oil glandular}},
  location     = {{Lemgo}},
  title        = {{{Vergleichende Untersuchungen der Festigkeiten von Ätherisch-Öl-Drüsenschuppen von Lippenblütlern – Sinn und Erkenntnisse}}},
  year         = {{2024}},
}

@misc{12025,
  author       = {{Liphardt, Daniel and Al Krad, Majed and Wilhelm, Patrick and Schwarzer, Knut and Müller, Ulrich}},
  keywords     = {{essential oil, scale up, steam distillation, oil losses}},
  location     = {{Lemgo}},
  title        = {{{Scale up-Probleme bei der schnellen Wasserdampfdestillation zur Gewinnung ätherischer Öle}}},
  year         = {{2024}},
}

@misc{12026,
  author       = {{Dehghanzadeh, Yasin and Liphardt, Daniel and Schwarzer, Knut and Wilhelm, Patrick and Müller, Ulrich}},
  keywords     = {{essential oil, scale up, steam distillation, yield, mint plants}},
  location     = {{Lemgo}},
  title        = {{{Prozessoptimierung der schnellen Wasserdampfdestillation zur Gewinnung ätherischer Öle}}},
  year         = {{2024}},
}

@misc{12028,
  abstract     = {{Since the early 2000s, forest owners in Central Europe have increasingly planted Nordmann fir (Abies nordmanniana (STEV.) SPACH) and Noble fir (Abies procera REHD.) for Christmas trees, intending to convert them into high forests. Climate-related damage, especially since 2018, has significantly reduced spruce populations, requirering a shift towards climate-adaptable tree species in future forests. Additionally, to reduce CO2 emissions from construction, there's a push for expanding timber construction, requiring non-spruce species for load-bearing products and applications. Although Nordmann and Noble fir are potential alternatives to spruce, they are not yet integrated into European standardization for load-bearing construction. Therefore, an assessment of German-origin Nordmann and Noble fir for use in glued laminated building products (GLT and CLT) is underway. Kiln-dried lamellas are graded visually and by machine using longitudinal vibration, with selected lamellas tested for tensile strength. Various mechanical properties are determined using non-destructive and destructive methods to establish input parameters for Finite Element Analysis (FEA). }},
  author       = {{Frühwald-König, Katja and Hackel, Martin and Kipp, Dennis and Lüke, Karin and Stracke, Felix Leonard and Burghaus, Noah and Wieland, Stefanie}},
  booktitle    = {{Proceedings of the 23rd International Nondestructive Testing and Evaluation of Wood Symposium}},
  keywords     = {{Nordmann fir, Noble fir, grading, elastomechanical properties, ultrasonic testing, vibration measurement}},
  location     = {{Campinas, Sao Paulo, Brasil}},
  pages        = {{192--204}},
  publisher    = {{United States Department of Agriculture (USDA)}},
  title        = {{{Nordmann and Noble fir Lamellas for Structural Purposes – Grading and Determination of Elastomechanical Properties by Non-Destructive and Destructive Testing}}},
  year         = {{2024}},
}

@misc{12029,
  abstract     = {{Following storm and calamity events in Europe since the early 2000s, many forest owners decided to establish Christmas tree plantations featuring Nordmann fir (Abies nordmanniana (STEV.) SPACH) and Noble fir (Abies procera REHD.), which are currently transformed into high forests. Climate-related forest damages and calamities result in significant depletion of spruce since 2018. Future forests should be characterized by a climate-adaptable variety of tree species. Nordmann and Noble fir represent possible alternatives to spurce, however from European origin they are not yet integrated into European standardization and therefore cannot be used for load bearing construction products. Consequently, an assessment of the potential of Nordmann and Noble fir of German origin for use in Glued Laminated Timber (GLT) is conducted. Selected tensile, compression, shear, and bending properties in various anatomical directions are determined on small, defect-free samples with destructive and non-destructive methods to establish input parameters for Finite Element Analysis (FEA).}},
  author       = {{Hackel, Martin and Frühwald-König, Katja and Burghaus, Noah and Stracke, Felix Leonard}},
  booktitle    = {{Proceedings of the 20th Annual Meeting of the Northern European Network for Wood Science and Engineering (WSE2024)}},
  location     = {{Edinburgh, Scotland}},
  publisher    = {{Edinburgh Napier University }},
  title        = {{{Nordmann and Noble fir -Determination of Elastomechanical Properties by Non-Destructive and Destructive Testing}}},
  year         = {{2024}},
}

@misc{12032,
  abstract     = {{As DC grids become more widespread in industry, the demand for DC industry-compliant power supplies is increasing. This paper describes the design and analysis of a SiC-based Active-Front-End with a switching frequency of 100 kHz and an output power of 50 kW. The focus of this Active-Front-End is on the small input inductance (uk=0,6%), which has been deliberately reduced in order to reduce package size. For a small inductance a high switching frequency and a fast and precise current measurement are basic requirements. The increase of the switching frequency reduces the size of the whole filter.}},
  author       = {{Otte, Raphael and Koch, Jan-Niklas and Borcherding, Holger and Stuckmann, Tim}},
  booktitle    = {{PCIM Europe : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 11-13 June 2024, Nuremberg}},
  isbn         = {{978-3-8007-6262-0}},
  keywords     = {{DC-Industry, DC-Grids, AIC, AFE, Active-Infeed-Converter, Active-Front-End}},
  location     = {{Nürnberg}},
  pages        = {{3402}},
  publisher    = {{VDE Verlag}},
  title        = {{{Design and Analysis of a 50kW SiC-based Active-Front-End with a very small line choke for DC-Grids}}},
  year         = {{2024}},
}

@misc{12036,
  author       = {{Jolk, Christian}},
  location     = {{Detmold}},
  title        = {{{Digitale GIS-basierte Landschafts- und Umweltmodelle in der Landschaftsarchitektur und der Umweltplanung. }}},
  year         = {{2024}},
}

@misc{12048,
  abstract     = {{Interactive stories can be an effective approach for teaching purposes. One shortcoming is the effort necessary to author and create these stories, especially complex storylines with choices for the readers. Based on recent advances in Natural Language Processing (NLP), new opportunities arise for assistance systems in the context of interactive stories. In our work, we present an authoring approach and prototypical tool for the creation of visual comic-strip like interactive stories, a type of hypercomics, that integrate an Artificial Intelligence (AI) assistance. Such comics are already used in our Gekonnt hanDeln web platform. The AI assistance provides suggestions for the overall story outline as well as how to design and write individual story frames. We provide a detailed description about the approach and its prototypical implementation. Furthermore, we present a study evaluating the prototype with student groups and how the prototype evolved in an iterative style based on the students’ feedback.}},
  author       = {{Grimm, Valentin and Rubart, Jessica}},
  booktitle    = {{HT '24: Proceedings of the 35th ACM Conference on Hypertext and Social Media}},
  isbn         = {{979-8-4007-0595-3 }},
  keywords     = {{Storytelling, Authoring, GPT, Hypercomics, Large Language Models}},
  location     = {{Poznan, Poland}},
  pages        = {{88--97}},
  publisher    = {{Association for Computing Machinery (ACM)}},
  title        = {{{Authoring Educational Hypercomics assisted by Large Language Models}}},
  doi          = {{10.1145/3648188.3675124}},
  year         = {{2024}},
}

@proceedings{12060,
  editor       = {{Noosten, Dirk}},
  isbn         = {{978-3-9816586-7-5}},
  issn         = {{2510-7321}},
  location     = {{Münster}},
  publisher    = {{Noosten}},
  title        = {{{Bewertung von Immobilien : 27. Symposium für Immobilienbewertung, Münster 2024 : Tagungsband }}},
  year         = {{2024}},
}

@misc{12072,
  author       = {{Neumann, Philipp}},
  booktitle    = {{OMT Magazin}},
  number       = {{21}},
  pages        = {{53--58}},
  publisher    = {{OMT}},
  title        = {{{Kompetenzen und Aufgaben von Online Marketing Manager:innen}}},
  year         = {{2024}},
}

@misc{12138,
  author       = {{Gossen, Arthur and Katsch, Linda and Schneider, Jan}},
  location     = {{Brügge}},
  title        = {{{Assessment of turbidity in beverage emulsions using computer vision}}},
  year         = {{2024}},
}

@misc{12147,
  abstract     = {{Aim:
Food loss and waste are significant challenges to the sustainability of food systems. This study aims to explore innovative approaches for reducing food waste and valorizing side-streams, focusing specifically on oat okara, a by-product of oat milk production. The aim is to extract and purify proteins from oat okara through enzymatic processes, with the ultimate goal of creating a sustainable protein source for various applications.
Method:
Oat okara was subjected to enzymatic treatment and hydrolysis using a pressure filter press. Enzymatic processes were optimized to achieve high protein yields with purity exceeding 80%. The hydrolysate was then concentrated using a rotary evaporator and purified through membrane filtration to remove impurities and smaller molecules.
Additionally, a chromatography system was employed to further purify the protein fractions and isolate individual peptides. This comprehensive approach ensures the extraction of high-quality proteins suitable for various applications.
Results:
The enzymatic extraction and purification process yielded proteins with high purity (>80%) from oat okara. The pressure filter press efficiently facilitated enzymatic hydrolysis, resulting in a hydrolysate rich in protein content. Subsequent concentration and purification steps effectively removed impurities, enhancing the quality of the protein extract.
Furthermore, chromatography enabled the isolation of individual peptides, further enhancing the value-added potential of the extracted proteins.
Conclusion:
This study demonstrates the feasibility of enzymatic extraction and purification of proteins from oat okara, a by-product of oat milk production. The extracted proteins hold promise as sustainable alternatives for various applications, including food and cosmetic industries. By valorizing side-streams and reducing food waste, this approach contributes to the development of more sustainable food systems.
}},
  author       = {{Probst, Daniel}},
  location     = {{Brügge}},
  title        = {{{Innovative Valorization of Oat By-Products}}},
  year         = {{2024}},
}

@misc{12149,
  author       = {{Struck, Susanne}},
  location     = {{Berlin}},
  title        = {{{Ackerbohnen in glutenfreien Backwaren - Chancen und Herausforderungen}}},
  year         = {{2024}},
}

@misc{12153,
  abstract     = {{In general gender differences have frequently been studied in experimental economics, but the findings remain inconclusive. In this study, we focus on gender differences in expectations and gender specific stereotypic mindsets in a dictator game, building on Blanckenburg, Tebbe, & Iseke (2023). We add to prior work by differentiating between stereotypical behavior and stereotypical expectations. Accordingly, we extended the classic dictator game by three steps in order to study whether recipients develop stereotypical beliefs regarding the dictator’s gender based on the amount of money the dictator has allocated to them. First, we asked recipients to estimate the amount. We then revealed the amount the dictator actually allocated to the recipient and finally, we asked the recipient to assess the dictator’s gender. In contrast to and building on previous results which show no gender differences regarding the amount the dictators allocate, we find evidence for stereotypical expectations of the recipients based on the amount the dictator allocates to them.}},
  author       = {{Austermann, Christine and von Blanckenburg, Korbinian and Iseke, Anja and Tebbe, Eva}},
  booktitle    = {{Journal of Economic Psychology}},
  issn         = {{0167-4870}},
  keywords     = {{Gender differences, Stereotypes, Dictator game, Economic behavior and expectations}},
  publisher    = {{Elsevier}},
  title        = {{{Stereotypical behavior vs. expectations: Gender differences in a dictator game}}},
  doi          = {{10.1016/j.joep.2024.102742}},
  volume       = {{103}},
  year         = {{2024}},
}

@inbook{12155,
  author       = {{Neumann, Philipp and Faupel, Christian}},
  booktitle    = {{Produktion, Logistik und Controlling im Zeitalter der Digitalisierung}},
  editor       = {{Betz, Stefan}},
  isbn         = {{978-3-339-13906-1}},
  pages        = {{63--94}},
  publisher    = {{Verlag Dr. Kovač }},
  title        = {{{Digitale Instrumente des Cost Engineering}}},
  volume       = {{580}},
  year         = {{2024}},
}

@book{12156,
  abstract     = {{Üben führt zum Lernerfolg
Dieses Übungsbuch stellt eine Aufgabensammlung mit Lösungen für das Lehrbuch „Mathematik in der BWL: Anwendungsorientiert und verständlich“ dar. Es enthält diverse Aufgaben inklusive
Lösungen zu den Themen:

    Folgen und Reihen,
    Funktionen,
    Differentialrechnung,
    Integralrechnung,
    Lineare Gleichungssysteme und lineare Programmierung. 

Obwohl zu Beginn eines jeden Kapitels noch einmal Formeln aufgelistet werden, die hilfreich für die Bearbeitung der Aufgaben sind, wird in diesem Übungsbuch auf umfangreiche Erklärungen und Erläuterungen verzichtet. Vielmehr wird dem Wunsch der Studierenden nach möglichst vielen Übungsaufgaben zu den relevanten Themen nachgekommen.
Die Aufgaben in diesem Übungsbuch sind in unterschiedliche Niveaus eingeteilt: Aufgabenniveau 1 (einfach), Aufgabenniveau 2 (mittel), Aufgabenniveau 3 (schwer). Entsprechend der prognostizierten Bearbeitungszeit sind zudem bei allen Aufgaben die jeweils erreichbaren Punkte hinterlegt (1 Punkt = 1 Minute Bearbeitungszeit). Damit wird dem Anwender nicht nur eine umfangreiche Aufgabensammlung zur Verfügung gestellt, sondern gleichzeitig eine Orientierung geboten, wie hoch das Anforderungsniveau der Wirtschaftsmathematik in einem Bachelorstudium der BWL ist und welche dafür vorgesehenen Bearbeitungszeit diesem Niveau entspricht, beispielsweise im Hinblick auf eine Klausur. }},
  author       = {{von Blanckenburg, Korbinian and Austermann, Christine}},
  isbn         = {{978-3-8006-7443-5 }},
  pages        = {{77}},
  publisher    = {{Vahlen }},
  title        = {{{Übungsbuch Mathematik in der BWL}}},
  volume       = {{2. Auflage}},
  year         = {{2024}},
}

@misc{12159,
  author       = {{Laux, Maximilian}},
  pages        = {{494}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Geschichte und Zukunft des Filmgenres Horror in der Bundesrepublik Deutschland}}},
  year         = {{2024}},
}

@book{12162,
  author       = {{Müller , Gerd and Kirsch, Dennis and Minge, Michael and Thüring, Manfred and Meincke, Marie and Kühn, Matthias}},
  isbn         = {{978-3-948917-26-5 }},
  pages        = {{176}},
  publisher    = {{Gesamtverband der Deutschen Versicherungswirtschaft e.V. }},
  title        = {{{Verkehrssicherheit von Kindertransport auf dem Fahrrad}}},
  volume       = {{95}},
  year         = {{2024}},
}

@misc{12167,
  abstract     = {{Deployment of Level 3 and Level 4 autonomous vehicles (AVs) in urban environments is significantly constrained by adverse weather conditions, limiting their operation to clear weather due to safety concerns. Ensuring that AVs remain within their designated Operational Design Domain (ODD) is a formidable challenge, making boundary monitoring strategies essential for safe navigation. This study explores the critical role of an ODD monitoring system (OMS) in addressing these challenges. It reviews various methodologies for designing an OMS and presents a comprehensive visualization framework incorporating trigger points for ODD exits. These trigger points serve as essential references for effective OMS design. The study also delves into a specific use case concerning ODD exits: the reduction in road friction due to adverse weather conditions. It emphasizes the importance of contactless computer vision-based methods for road condition estimation (RCE), particularly using vision sensors such as cameras. The study details a timeline of methods involving classical machine learning and deep learning feature extraction techniques, identifying contemporary challenges such as class imbalance, lack of comprehensive datasets, annotation methods, and the scarcity of generalization techniques. Furthermore, it provides a factual comparison of two state-of-the-art RCE datasets. In essence, the study aims to address and explore ODD exits due to weather-induced road conditions, decoding the practical solutions and directions for future research in the realm of AVs.}},
  author       = {{Subramanian, Ramakrishnan and Büker, Ulrich}},
  booktitle    = {{Eng : advances in engineering}},
  issn         = {{2673-4117}},
  keywords     = {{autonomous vehicles, operational design domain, computer vision, machine learning, road surface detection}},
  number       = {{4}},
  pages        = {{2778--2804}},
  publisher    = {{MDPI AG}},
  title        = {{{Study of Contactless Computer Vision-Based Road Condition Estimation Methods Within the Framework of an Operational Design Domain Monitoring System}}},
  doi          = {{10.3390/eng5040145}},
  volume       = {{5}},
  year         = {{2024}},
}

@misc{12207,
  abstract     = {{Lakes represent a vital source of freshwater, accounting for 87% of the Earth’s accessible surface freshwater resources and providing a range of ecosystem services, including water for human consumption. As climate change continues to unfold, understanding the potential evaporative water losses from lakes becomes crucial for effective water management strategies. Here we investigate the impacts of climate change on the evaporation rates of 23 European lakes and reservoirs of varying size during the warm season (July–September). To assess the evaporation trends, we employ a 12-member ensemble of model projections, utilizing three one-dimensional process-based lake models. These lake models were driven by bias-corrected climate simulations from four General Circulation Models (GCMs), considering both a historical (1970–2005) and future (2006–2099) period. Our findings reveal a consistent projection of increased warm-season evaporation across all lakes this century, though the magnitude varies depending on specific factors. By the end of this century (2070–2099), we estimate a 21%, 30% and 42% average increase in evaporation rates in the studied European lakes under RCP (Representative Concentration Pathway) 2.6, 6.0 and 8.5, respectively. Moreover, future projections of the relationship between precipitation (P) and evaporation (E) in the studied lakes, suggest that P-E will decrease this century, likely leading to a deficit in the availability of surface water. The projected increases in evaporation rates underscore the significance of adapting strategic management approaches for European lakes to cope with the far-reaching consequences of climate change.}},
  author       = {{La Fuente, Sofia and Jennings, Eleanor and Lenters, John D. and Verburg, Piet and Kirillin, Georgiy and Shatwell, Tom and Couture, Raoul-Marie and Côté, Marianne and Vinnå, C. Love Råman and Woolway, R. Iestyn}},
  booktitle    = {{Climatic Change}},
  issn         = {{1573-1480}},
  keywords     = {{Multi-model, Water availability, Europe, Ensemble, Lake evaporation, Latent heat flux}},
  number       = {{12}},
  publisher    = {{Springer}},
  title        = {{{Increasing warm-season evaporation rates across European lakes under climate change}}},
  doi          = {{10.1007/s10584-024-03830-2}},
  volume       = {{177}},
  year         = {{2024}},
}

@misc{12209,
  abstract     = {{Net ecosystem production (NEP) is an important indicator of lake ecosystem function and integrity. An earlier study, restricted to one geographical region, indicated that oxygen saturation levels (DO%) might be used to predict daily NEP in shallow lakes. To test the generality of the method, we used DO% data collected in a standardised pan-European mesocosm experiment with contrasting trophic states and water levels covering a large climate gradient (from Sweden to Turkey). We corroborated these data with process-based DO simulations. The NEP ~ DO% relation depended on factors influencing gas transfer: water depth and wind. The NEP ~ DO% relation per volume became weaker with increasing depth (1–2 m) but was independent of depth when area based. Simulations indicated that the marginalisation of the depth was sensitive to wind conditions. Trophic status, temperature and light showed no or only marginal (climate zone) effects (experimental data), while the simulations indicated influence of those factors under particular wind–depth conditions. We confirmed that when considering also wind and depth effects, midday DO% potentially provides reliable estimates of daily NEP. Therefore, historical monitoring data of DO% might be used to estimate NEP, and process-based oxygen models may be valuable tool therein. We encourage further tests.}},
  author       = {{Cao, Yu and Scharfenberger, Ulrike and Shatwell, Tom and Adrian, Rita and Agasild, Helen and Angeler, David G. and Beklioğlu, Meryem and Çakıroğlu, Ayşe ldil and Hejzlar, Josef and Papastergiadou, Eva and Šorf, Michal and Stefanidis, Kostas and Søndergaard, Martin and Zingel, Priit and Jeppesen, Erik}},
  booktitle    = {{Hydrobiologia : acta hydrobiologica, hydrographica, limnologica et protistologica }},
  issn         = {{1573-5117}},
  keywords     = {{Metabolism, Simple models, Process-based models, Cross-system analyses}},
  number       = {{2}},
  pages        = {{471--487}},
  publisher    = {{Springer}},
  title        = {{{Predicting daily net ecosystem production in shallow lakes from dissolved oxygen saturation levels: a pan-European mesocosm experiment and modelling approach}}},
  doi          = {{10.1007/s10750-024-05714-z}},
  volume       = {{852}},
  year         = {{2024}},
}

@misc{12211,
  abstract     = {{Aquatic ecosystems are threatened by eutrophication from nutrient pollution. In lakes, eutrophication causes a plethora of deleterious effects, such as harmful algal blooms, fish kills and increased methane emissions. However, lake-specific responses to nutrient changes are highly variable, complicating eutrophication management. These lake-specific responses could result from short-term stochastic drivers overshadowing lake-independent, long-term relationships between phytoplankton and nutrients. Here, we show that strong stoichiometric long-term relationships exist between nutrients and chlorophyll a (Chla) for 5-year simple moving averages (SMA, median R² = 0.87) along a gradient of total nitrogen to total phosphorus (TN:TP) ratios. These stoichiometric relationships are consistent across 159 shallow lakes (defined as average depth < 6 m) from a cross-continental, open-access database. We calculate 5-year SMA residuals to assess short-term variability and find substantial short-term Chla variation which is weakly related to nutrient concentrations (median R² = 0.12). With shallow lakes representing 89% of the world’s lakes, the identified stoichiometric long-term relationships can globally improve quantitative nutrient management in both lakes and their catchments through a nutrient-ratio-based strategy.}},
  author       = {{Graeber, Daniel and McCarthy, Mark J. and Shatwell, Tom and Borchardt, Dietrich and Jeppesen, Erik and Søndergaard, Martin and Lauridsen, Torben L. and Davidson, Thomas A.}},
  booktitle    = {{Nature Communications}},
  issn         = {{2041-1723}},
  number       = {{1}},
  publisher    = {{Springer Nature}},
  title        = {{{Consistent stoichiometric long-term relationships between nutrients and chlorophyll-a across shallow lakes}}},
  doi          = {{10.1038/s41467-024-45115-3}},
  volume       = {{15}},
  year         = {{2024}},
}

@misc{12212,
  abstract     = {{Water quality and hypoxia in lakes and reservoirs are strongly associated with water renewal. Yet vertical water exchange is still not fully understood and challenging to evaluate in highly dynamic systems. Here, we applied a scaling approach using the vertical timescale, vertical water age (VWA), defined as time since a water parcel last touched the water surface. We established a 3D hydrodynamic-based age model to quantify the vertical water renewal in Xiangxi Bay, a tributary bay of the Three Gorges Dam. The integrated effects of hydrodynamic processes like stratification, intruding density currents from the mainstream, and upstream inflow on the vertical renewal were accounted for. Results indicated that the spatial–temporal distribution of VWA in Xiangxi Bay depended on stratification and forms of intruding density currents. Age was large in spring and summer, and small in autumn and winter, reaching a maximum of 25 days in April. The vertical water renewal was faster during bottom intrusions from the mainstream than during middle and surface intrusions. At times, the epilimnion contained old water due to circulations, and the hypolimnion contained young water due to upstream flushing. In contrast to natural lakes, the bottom water was often younger than overlying intermediate waters. This demonstrated that mixed layer depth was insufficient to fully capture the vertical exchange in riverine systems with significant surface/bottom intrusion. The findings suggested VWA as a quantitative measure of vertical water transport in highly dynamic systems and its usability for environmental water management.}},
  author       = {{Gai, Bo and Boehrer, Bertram and Sun, Jian and Li, Yuanyi and Lin, Binliang and Shatwell, Tom}},
  booktitle    = {{Journal of Hydrology}},
  issn         = {{1879-2707}},
  keywords     = {{Vertical water renewal, Water age, Thermal stratification, Hypoxia, 3D hydrodynamic-based age model, Water environmental management}},
  number       = {{3}},
  publisher    = {{Elsevier BV}},
  title        = {{{Vertical water age and water renewal in a large riverine reservoir}}},
  doi          = {{10.1016/j.jhydrol.2024.130701}},
  volume       = {{631}},
  year         = {{2024}},
}

@misc{12213,
  abstract     = {{Within freshwater networks, lakes and reservoirs are reactors that modify nutrient dynamics. Their functioning is based on an interplay of hydrological and biogeochemical processes, rendering them vulnerable to climate change. Future changes in catchment characteristics are likely to alter the timing and magnitude of nutrient concentrations in discharge. This study investigated the impact of changing variability of nutrient concentrations on lake and reservoir dynamics. We examined intraannual nutrient retention and analyzed the role of reservoirs in reconfiguring the variability of nutrients. Utilizing the 1D lake model GOTM-WET, we simulated nutrient processing in a mesotrophic reservoir. Further, we performed scenario simulations by modifying the variability of inflow nitrogen and phosphorus concentrations. Our findings indicate that the reservoir removed ∼4% and ∼12% of total nitrogen (TN) and total phosphorus (TP), respectively. Particulate fractions were retained efficiently, but there was a net export of dissolved organic fractions. Regarding mixing and stratification periods, however, we observed net nitrogen export during stratification in certain years. During stratification, outflow concentration variability remained relatively unchanged for TN and TP compared to inflow concentrations. Conversely, phosphate and nitrate concentration variability increased in the outflow because of in-lake assimilation and the influence of hydrological events. With increasing inflow concentration variability during stratification, there was decreased removal of TN and TP by the reservoir, but increased variability of concentration. By evaluating the lake's capacity to attenuate variability of nutrient inflows under altered conditions, there are opportunities to improve monitoring of nutrient export and evaluate the potential impact of nutrient peaks on downstream drinking water resources and ecosystems.}},
  author       = {{Determann, Maria and Musolff, Andreas and Frassl, Marieke A. and Rinke, Karsten and Shatwell, Tom}},
  booktitle    = {{Inland waters : journal of the International Society of Limnology}},
  issn         = {{2044-205X}},
  keywords     = {{catchment–lake interaction, concentration variability, GOTM-WET, lake nutrient export, reservoir biogeochemistry}},
  number       = {{4}},
  pages        = {{560--575}},
  publisher    = {{Freshwater Biological Association}},
  title        = {{{Nutrient retention in a small reservoir under changed variability of inflow nutrient concentration}}},
  doi          = {{10.1080/20442041.2024.2305105}},
  volume       = {{13}},
  year         = {{2024}},
}

@misc{12215,
  abstract     = {{Water-level reduction frequently occurs in deep reservoirs, but its effect on dissolved oxygen concentration is not well understood. In this study we used a well-established water quality model to illustrate effects of water level dynamics on oxygen concentration in Rappbode Reservoir, Germany. We then systematically elucidated the potential of selective withdrawal to control hypoxia under changing water levels. Our results documented a gradual decrease of hypolimnetic oxygen concentration under decreasing water level, and hypoxia occurred when the initial level was lower than 410 m a.s.l (71 m relative to the reservoir bottom). We also suggested that changes of hypoxic region, under increasing hypolimnetic withdrawal discharge, followed a unimodal trajectory with the maximum hypoxic area projected under the discharge between 3 m3/sec and 4 m3/sec. Besides, our results illustrated the extent of hypoxia was most effectively inhibited if the withdrawal strategy was applied at the end of stratification with the outlet elevation at the deepest part of the reservoir. Moreover, hypoxia can be totally avoided under a hybrid elevation withdrawal strategy using surface withdrawal during early and mid stratification, and deep withdrawal at the end of stratification. We further confirmed the decisive role of thermal structure in the formation of hypoxia under water-level reduction and withdrawal strategies. We believe the conclusions from this study can be applied to many deep waters in the temperate zone, and the results should guide stakeholders to mitigate negative impacts of hypoxia on aquatic ecosystems.}},
  author       = {{Mi, Chenxi and Rinke, Karsten and Shatwell, Tom}},
  booktitle    = {{Journal of Environmental Sciences}},
  issn         = {{1878-7320}},
  keywords     = {{Hypoxia, Water-level reduction, Hypolimnetic water withdrawal, Stratification phenology, Water quality simulation, Sediment oxygen demand}},
  number       = {{12}},
  pages        = {{127--139}},
  publisher    = {{Elsevier BV}},
  title        = {{{Optimizing selective withdrawal strategies to mitigate hypoxia under water-level reduction in Germany's largest drinking water reservoir}}},
  doi          = {{10.1016/j.jes.2023.06.025}},
  volume       = {{146}},
  year         = {{2024}},
}

@misc{13816,
  abstract     = {{The dataset comprises six image sections of one genuine and two counterfeit banknote-like specimens. The images were captured at 1200dpi and the sections are each 256x256 pixels in size. The genuine banknote specimen was produced with Intaglio printing and the counterfeits with offset printing processes of varying quality. There are 150 instances for each of the six image sections, with 50 samples of each of the three classes available, so in total almost 900 images are provided.}},
  author       = {{Knaup, Julian and Holst, Christoph-Alexander and Lohweg, Volker}},
  publisher    = {{Zenodo}},
  title        = {{{Banknote Authentication based on Intaglio print}}},
  doi          = {{10.5281/ZENODO.11119014}},
  year         = {{2024}},
}

@misc{13824,
  abstract     = {{

This dataset provides synthetic training data for the real-world industrial application of terminal strip object detection to investigate the sim-to-real generalization performance of modern object detectors based on state-of-the-art image synthesis methods. It consists of 30.000 randomly generated synthetic images of terminal strips covering 36 different terminal blocks in five colors and additional accessories such as plug-in bridges, test adapters, end covers and markings. Except from the markings and the DIN rail all objects of the terminal strips are labeled with a bounding box and the respective object class for supervised learning. Additionally, 300 real images of terminal strips were taken and manually labeled for the real-world test.

If you use this datset for your research, please consider citing this: Investigation of the Impact of Synthetic Training Data in the Industrial Application of Terminal Strip Object Detection
}},
  author       = {{Baumgart, Nico and Lange-Hegermann, Markus and Mücke, Mike}},
  keywords     = {{Object Detection, Image Synthesis, Domain Randomization, Domain Gap, Terminal Strip}},
  publisher    = {{Zenodo}},
  title        = {{{Synthetic Training Dataset for Real-World Terminal Strip Object Detection}}},
  doi          = {{10.5281/ZENODO.16080102}},
  year         = {{2024}},
}