@misc{11605,
  abstract     = {{The recovery of beer from surplus yeast is to date an economical business case only for large breweries. In this work, a here novel process with rotating ceramic microfiltration membranes is used. This allows a very high lift force to be achieved while still maintaining a small transmembrane pressure to reduce the formation of a fouling layer. The results show that long running times (between cleanings) are possible, limited only by the change in the rheological properties of the suspension due to thickening. From a so-called "Inflexion Point" (IF), the filtration behavior changes abruptly. The aim of the work was therefore to use machine learning aided modeling to predict the IF from experimental data in order to optimize the process and to achieve the most economical conditions. The economic efficiency depends on the space-time yields. The results show that a significant improvement in economic efficiency could be possible with the help of modeling and this special kind of filtration technology. However, the economic efficiency depends finally on the conditions in each individual brewery.}},
  author       = {{Trilling-Haasler, Marc and Tebbe, Jörn and Lange-Hegermann, Markus and Schneider, Jan}},
  keywords     = {{surplus yeast, membrane filtration, microfiltration}},
  location     = {{Lille}},
  title        = {{{Yeast filtration with rotating membrane filtration –  a new approach for an economical recovery of beer form surplus yeast }}},
  year         = {{2024}},
}

@misc{11607,
  abstract     = {{Pasteurization of bottles and cans is an important technique for biological stabilization of beer as well as mixed beer drinks, malt beer and non-alcoholic beers. Despite recuperation, the heat requirement is very high and can be significantly reduced by lowering the maximum temperature in the pasteurizer. The current practice of calculating the lethal heat effect is based on the so-called beer formula using a globalized z-value for the temperature dependence of the inactivation. The premise experiments here is that for products containing sugar, such as malt beer, yeast cells pose the greatest danger. Therefore, the D values at various temperatures and the z values of three of the Krombacher Brewery's own yeasts (bottom-fermenting and top-fermenting) were determined in the laboratory using the capillary method. In a challenge test in the brewery, bottles with different products were inoculated with these yeasts and samples were taken from the industrial pasteurizer every two minutes and examined for viable cell counts. Accordingly, using specific D/z values, precise pasteurization can be achieved, the treatment temperature can be reduced to 55° C and 20-25% of energy can be saved.}},
  author       = {{Nolte, Jannik and Hense, Ludger  and Weishaupt, Imke and Schneider, Jan}},
  keywords     = {{pasteurization, D value, z-value, heat energy savings, large scale trials, biological stability, yeast}},
  location     = {{Lille}},
  title        = {{{How do you turn a shotgun into a precision rifle - significant heat savings through the use of kinetic laboratory data (D/z values) in large-scale pasteurization}}},
  year         = {{2024}},
}

@misc{11608,
  abstract     = {{The handling of beer-yeast suspensions (BYS) occurs in several brewery processes , as in  pitching, propagation or beer recovery. Highly concentrated BYS do not behave like a shear thinning fluid but like a dilatant fluid. Above a solid content >18% shear stress, as generated turbulences or wall friction increases the dynamic viscosity of the fluid. It is precisely here that influencing factors that have received little attention as the effect of different cell sizes to date can make themselves felt. Even if there is only one yeast strain used in a brewery different cell sizes can occur when there are different osmotic pressures, induced by sugar and alcohol concentration. In this work, the cell size distributions of a Saccharomyces strain were artificially varied and measured. Rheological studies were then carried out on these BYS. Results show that increasing mean cell diameters (sauter diameter) lead to a change in the rheological behavior. It is assumed that cell sizes are also relevant to processing in practice, especially where high concentrations are achieved. Especially for handling these highly concentrated BYS with high shear pumps or agitators it is therefore important to know the relationship between the mean cell diameter and the either shear thinning or shear thickening rheological behavior, because even with the same yeast concentration both rheological behaviors can occur.}},
  author       = {{Trilling-Haasler, Marc and Jürgensmeier, Simon-Elias and Schneider, Jan}},
  keywords     = {{yeast, rheology, cell size, osmotic pressure, filtration}},
  location     = {{Lille}},
  title        = {{{Influence of osmotic pressure induced yeast particle size on the rheological properties of beer-yeast-suspensions}}},
  year         = {{2024}},
}

@misc{11612,
  author       = {{Stawinoga, Martin}},
  booktitle    = {{Der Betrieb}},
  issn         = {{0005-9935 }},
  number       = {{27/28}},
  pages        = {{1629--1634}},
  publisher    = {{Fachmedien Otto Schmidt KG}},
  title        = {{{Ethik- und Unabhängigkeitsstandards für die Prüfung eines Nachhaltigkeitsberichts – Eine Erörterung des IESBA-Konsultationsentwurfs}}},
  volume       = {{77}},
  year         = {{2024}},
}

@misc{11637,
  abstract     = {{In Städten und Kommunen kommt dem Vorhandensein und der Qualität einer Blau-Grünen Infrastruktur aufgrund des Klimawandels eine besonders hohe Bedeutung zu. Stadtbäume können aufgrund von Wasserknappheit, Hitzestress sowie sich ausbreitender Krankheiten und Schädlinge die ihnen zugedachten klimatischen und gestalterischen Funktionen immer weniger erfüllen. Gleichzeitig können die verschiedenen Belastungen nicht durch technische Lösungen kompensiert werden. Sinnvoller ist es, dieser Situation mit einer übergeordneten strategischen Freiraumplanung zu begegnen, die die Blau-Grüne Infrastruktur zum einen sichert und weiterentwickelt, zum anderen ihre Wohlfahrtswirkung für alle Bevölkerungsgruppen zugänglich macht sowie die verschiedenen Freiräume und Freiraumfunktionen gerecht verteilt. GIS-basierte Modelle können hier eine gute Planungsgrundlage bilden, indem sie dabei helfen, prioritäre Handlungsräume zu bestimmen und Maßnahmen zu benennen. Neben der Diskussion kommunaler Ziele für die Freiraumentwicklung bedarf es hierfür deren Übersetzung in ein GIS-Modell. Dabei sind verschiedene Annahmen hinsichtlich der Erreichbarkeit oder den Flächenansprüchen zur Freiraumnutzung verschiedener Bevölkerungsgruppen zu treffen. Da es hierzu zwar zahlreiche Praxisbeispiele aus unterschiedlichen Städten gibt (Berlin, Dresden, Frankfurt a. Main, Graz, Hamburg, Hoyerswerda, Leipzig, Magdeburg, Mannheim, München, Nürnberg, Rheine, Wien und Zürich [1, S. 43f]), die im Wesentlichen auf den Werten der Gartenamtsleiterkonferenz aus dem Jahr 1973 fußen, diese aber bislang weder empirisch noch anderweitig wissenschaftlich belegt werden konnten, besteht bezüglich der anzusetzenden Orientierungswerte nach wie vor Forschungsbedarf [1, S. 39ff]. Auch wenn die argumentativ hergeleiteten Orientierungswerte überprüft werden müssen, liefern die GIS-Modelle planerisch relevante Ergebnisse, da die getroffenen Annahmen für alle Flächen und die gesamte Bevölkerung gelten und die Unterscheidung von gut, mäßig oder schlecht mit Freiräumen versorgten Bereichen ablesbar ist. Um aus den Ergebnissen planerische Maßnahmen abzuleiten, bleibt es aber erforderlich, räumliche Restriktionen (z. B. Barrieren) oder Begabungen, wie das Vorhandensein von Flächenpotenzialen in einem synthetischen Entwurfsprozess, zu einem sinnvollen Ergebnis zusammenzuführen. Das GIS-Modell zur Beurteilung der Freirauversorgung stellt somit einen zentralen Baustein der Umweltgerechtigkeit auf kommunaler Ebene dar.}},
  author       = {{Deppe, Katharina and Rohler, Hans-Peter and Yang, Yunbo}},
  booktitle    = {{Umweltinformationssysteme - Digitalisierung im Zeichen des Klimawandels und der Energiewende (UIS 2023)}},
  editor       = {{Fuchs-Kittowski, Frank and Abecker, Andreas and Hosenfeld, Friedhelm and Reineke, Anja and Jolk, Christian}},
  isbn         = {{978-3-658-43734-3}},
  keywords     = {{Strategische Freiraumplanung, Umweltgerechtigkeit, Freiraumversorgung, Entscheidungshilfeinstrument, GIS}},
  location     = {{Höxter}},
  pages        = {{63--80}},
  publisher    = {{Springer}},
  title        = {{{Freiraumversorgung als zentraler Baustein von Umweltgerechtigkeit GIS-Studien als Grundlagen strategischer Freiraumplanung}}},
  doi          = {{10.1007/978-3-658-43735-0_5}},
  year         = {{2024}},
}

@misc{11657,
  booktitle    = {{Sustainable facades ::: summer semester report}},
  editor       = {{Balderrama, Alvaro and Arztmann, Daniel}},
  number       = {{9}},
  publisher    = {{Technische Hochschule Ost-Westfalen Lippe}},
  title        = {{{Design Strategies}}},
  volume       = {{2023}},
  year         = {{2024}},
}

@misc{11660,
  author       = {{Große Föller, Lisa}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe }},
  title        = {{{Prokrastination unter Studierenden: Eine Auseinandersetzung mit  den Ursachen, Problemen und  Methoden zur Lösung des  Aufschiebens}}},
  year         = {{2024}},
}

@misc{11663,
  abstract     = {{Geosynthetic Clay Liners (GCL) are widely used in sealing applications throughout the world. In applications with constant water heads - such as artificial ponds, rivers, canals, etc. - the permeation rate through the GCL is of vital importance to the performance of the whole structure and the allocated function. A proper design must consider all potential sources of water loss in the designed application. This includes also the performance of overlaps or the combined effect of multiple sealing layers. Some factors are sometimes misinterpreted, underestimated or not considered.
The presented paper will focus on two major topics, each affecting the performance of geosynthetic sealing systems with special focus on geosynthetic clay liners (GCL). The impact of these effect is to be illustrated on exemplary calculations for virtual projects. The quantification of these effects will result in recommendations that shall help to anticipate unfavorable situations for the operational phase of a project already in the design stage. This shall contribute to a better overall understanding of GCL and help to avoid preventable design errors. An outlook shall summarize the further efforts envisaged by the authors to provide a simple tool to allow calculation of permeation rates for GCL or complete barrier systems.}},
  author       = {{Köhler, Martin and Niehues, Christian and von Maubeuge, Kent P.}},
  booktitle    = {{Geosynthetics: Leading the Way to a Resilient Planet : PROCEEDINGS OF THE 12TH INTERNATIONAL CONFERENCE ON GEOSYNTHETICS (12ICG), 17–21 SEPTEMBER 2023, ROMA, ITALY}},
  editor       = {{Biondi, Giovanni and Cazzuffi, Daniele and Moraci, Nicola and Soccodato, Claudio}},
  location     = {{Rome}},
  pages        = {{1610--1614}},
  publisher    = {{CRC Press, Taylor & Francis Group}},
  title        = {{{Considerations for the Calculation of Permeation Rates for Geosynthetic Clay Liners in Constant Water Head Applications}}},
  doi          = {{10.1201/9781003386889}},
  year         = {{2024}},
}

@book{11666,
  abstract     = {{Den Knoten entwirren
Alles hängt mit allem zusammen. Was sich anhört wie eine Binsenweisheit, ist in der Industrie tägliche Praxis geworden. Komplexität und „Verschränktheit“ der Prozesse in Entwicklung und Produktion wachsen vielen Unternehmen über den Kopf. Der Durchblick geht verloren, die Kosten laufen davon.

Das muss nicht so sein. Wie man der grassierenden Komplexität mit Methode zu Leibe rückt, zeigt dieses elektronische Buch. Denn darum geht es in der Praxis: Trotz vermeintlich intelligenter Systeme im Unternehmen den Überblick behalten und die Komplexität beherrschen. 

Mittel zum Zweck ist ein Assistenzsystem, das im Rahmen eines Forschungsprojektes entwickelt wurde und jetzt für den Einsatz bereitsteht. Damit das System nicht übergestülpt, sondern schrittweise erlernt und wirklich gelebt werden kann, wird ein flankierendes Konzept zur Befähigung präsentiert.

Das Team um Herausgeber Andreas Deuter, seines Zeichens Professor an der Technischen Hochschule Ostwestfalen-Lippe (TH OWL), hat ein kompaktes und verständliches Buch verfasst. Ein echtes LOGiBit eben.}},
  author       = {{Herrmann, Jan-Phillip and Imort, Sebastian and Trojanowski, Christoph and Pankrath, Carolin}},
  editor       = {{Deuter, Andreas}},
  publisher    = {{LOG_X Verlag}},
  title        = {{{Den Überblick behalten }}},
  year         = {{2024}},
}

@misc{11716,
  author       = {{Wittland, Sebastian}},
  location     = {{Köln}},
  title        = {{{Investigation and characterization of the techno functional and sensory properties of allulose in baked goods}}},
  year         = {{2024}},
}

@book{11725,
  author       = {{Köhler, Martin and Ulonska, Dietmar and Wellner, Frohmut}},
  pages        = {{118}},
  publisher    = {{Betonverband Straße, Landschaft, Garten e.V. (SLG)}},
  title        = {{{ Technisches Handbuch - Dauerhafte Verkehrsflächen mit Betonpflastersteinen}}},
  year         = {{2024}},
}

@misc{11752,
  author       = {{Block, Hilla}},
  pages        = {{95}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Whatever that means: Experimentelle Typografie }}},
  year         = {{2024}},
}

@misc{11755,
  editor       = {{Hofmann, Martin Ludwig}},
  issn         = {{2566-8382}},
  number       = {{16}},
  pages        = {{154}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{52 Grad : Magazin, Stadtplanung }}},
  year         = {{2024}},
}

@misc{11777,
  abstract     = {{Mit der CSRD-Richtlinie geht eine verbindliche materielle Prüfung des Nachhaltigkeitsberichts mit zunächst begrenzter Sicherheit einher. Diese Prüfung ist allerdings noch nicht durch Standards bzw. Leitlinien konkretisiert. Die EU-Kommission beabsichtigt zwar, solche Standards für die Prüfung mit begrenzter bzw. hinreichender Sicherheit zu entwickeln. Deren Verabschiedung wird aber aller Voraussicht nach erst im Jahr 2026 bzw. 2028 erfolgen. Vor diesem Hintergrund hat die EU-Kommission den Committee of European Auditing Oversight Bodies (CEAOB) mit der Entwicklung einer unverbindlichen Leitlinie für die Prüfung eines Nachhaltigkeitsberichts mit begrenzter Sicherheit beauftragt, welchem vor allem für die Prüfung der Nachhaltigkeitsberichte der Geschäftsjahre 2024 und 2025 eine besondere Bedeutung zukommen wird. Der im Juni 2024 vorgelegte Konsultationsentwurf ist Gegenstand dieses Beitrags.}},
  author       = {{Stawinoga, Martin}},
  booktitle    = {{Der Konzern}},
  issn         = {{1611-2296}},
  number       = {{7/8}},
  pages        = {{293--299}},
  publisher    = {{Fachmedien Otto Schmidt KG}},
  title        = {{{Leitlinie für die Prüfung eines Nachhaltigkeitsberichts mit begrenzter Sicherheit – Eine Erörterung des CEAOB-Konsultationsentwurfs}}},
  year         = {{2024}},
}

@misc{11778,
  author       = {{Sandrowski, Khira}},
  pages        = {{66}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Zwischen Informationspflicht und Sensationslust - Die Rolle der Medien in der journalistischen Berichterstattung von Kriminalfällen am Beispiel des Mediums Podcast}}},
  year         = {{2024}},
}

@misc{11779,
  author       = {{Bergen, Jenny}},
  pages        = {{91}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Journalismus in einer emanzipierten Gesellschaft : Eine Analyse der Frauenbilder in Magazinen}}},
  year         = {{2024}},
}

@misc{11789,
  author       = {{Frühwald-König, Katja}},
  location     = {{Lemgo}},
  title        = {{{Forestry and Timber Industry in the Context of the Bioeconomy of North Rhine-Westphalia}}},
  year         = {{2024}},
}

@misc{11792,
  abstract     = {{To facilitate the drying process and enhance the properties of oil palm wood, oil palm boards were mechanically pre-dewatered and thermo-hygro-mechanically (THM) densified. The thickness of the boards was reduced with compression ratios of 40%, 60% and 75%. Since densified wood tends to recover from compression, especially under humid conditions, this study examined the set-recovery and the hygroscopic behavior of THM densified oil palm wood. The equilibrium moisture content (EMC), differential swelling and swelling coefficient, linear swelling and shrinkage as well as the differential swelling anisotropy were determined under climate conditions with different relative humidity (RH) (20°C/35% RH, 20°C/65% RH and 20°C/85% RH). The maximum swelling was measured after water soaking and the remaining set-recovery was evaluated after re-drying at 103°C. The EMC was reduced by the THM process by around 20%. In the direction of compression (thickness), the densified specimens show higher values for all analyzed swelling and shrinkage parameters than the undensified specimens from the equivalent position within the trunk. The maximum swelling in thickness of 22–38% during water soaking is mostly reversed by shrinkage during re-drying and a comparably low remaining set-recovery of 3–8% is measured at oven dry condition.}},
  author       = {{Kölli, Nathan and Frühwald-König, Katja and Hackel, Martin}},
  booktitle    = {{Wood Material Science & Engineering}},
  issn         = {{1748-0280}},
  keywords     = {{Densification, set-recovery, swelling and shrinkage}},
  pages        = {{1--12}},
  publisher    = {{Taylor & Francis}},
  title        = {{{Hygroscopic behavior of thermo-hygro-mechanical (THM) densified oil palm sawn timber}}},
  doi          = {{10.1080/17480272.2024.2381100}},
  year         = {{2024}},
}

@misc{11793,
  abstract     = {{One obstacle to the industrial processing of oil palm wood is its nearly water-saturated state in green condition and its high tendency to develop cell collapse during kiln drying. This study analyzed mechanical dewatering by flat compression as an alternative pre-drying method for wet oil palm sawn timber. In the process, boards 700 mm long were compressed at ratios of 40% and 60% using a laboratory press, which resulted in water extraction of the free water varying between 38–52% and 60–73%, respectively. Since unperforated press plates were used, the water could only escape over the crosscut and long edges. The extent to which the crosscut and long edges were involved in dewatering was examined, and found to depend on the position of the board in the trunk due to the different water permeability conditions at the different heights. Permeability measurements, therefore, were carried out on cylindrical specimens using a specifically designed testing device. For the analysis of the hydrostatic pressure development in the boards, three pressure transducers were installed at different distances to the crosscut at half board thickness. The analysis of the recovery of compression showed, that the boards recovered to a large extend immediately after compression.}},
  author       = {{Kölli, Nathan}},
  booktitle    = {{Wood Material Science & Engineering}},
  issn         = {{1748-0280}},
  keywords     = {{Flat compression, hydrostatic pressure, mechanical dewatering, water permeability}},
  pages        = {{1--15}},
  publisher    = {{Taylor & Francis}},
  title        = {{{Dewatering behavior of wet oil palm sawn timber during flat compression}}},
  doi          = {{10.1080/17480272.2024.2355545}},
  year         = {{2024}},
}

@misc{11795,
  author       = {{Hackel, Martin}},
  location     = {{Möhnesee-Günne}},
  title        = {{{Nutzungspotenziale klimaadaptiver Holzarten}}},
  year         = {{2024}},
}

@misc{11798,
  author       = {{Schröter, Pia-Sophie}},
  pages        = {{120}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{Marketing im Metaverse - Chancen und Risiken für Unternehmen}}},
  year         = {{2024}},
}

@misc{11807,
  author       = {{Klepp, Georg Heinrich}},
  booktitle    = {{Kraftstoffe Für Die Mobilität Von Morgen : 6. Tagung der Fuels Joint Research Group Am 13. und 14. Juni 2024 in Berlin}},
  editor       = {{Munack, Axel and Krahl, Jürgen and Bünger, Jürgen and Eilts, Peter}},
  location     = {{Berlin}},
  pages        = {{103--109}},
  publisher    = {{Cuvillier Verlag}},
  title        = {{{Digitaler Kraftstoffzwilling}}},
  volume       = {{35}},
  year         = {{2024}},
}

@misc{11808,
  abstract     = {{The application of hydrogen for energy storage and as a vehicle fuel necessitates efficient and effective storage technologies. In addition to traditional cryogenic and high-pressure tanks, an alternative approach involves utilizing porous materials such as activated carbons within the storage tank. The adsorption behaviour of hydrogen in porous structures is described using the Dubinin-Astakhov isotherm. To model the flow of hydrogen within the tank, we rely on the equations of mass conservation, the Navier-Stokes equations, and the equation of energy conservation, which are implemented in a computational fluid dynamics code and additional terms account for the amount of hydrogen involved in sorption and the corresponding heat release. While physical models are valuable, data-driven models often offer computational advantages. Based on the data from the physical adsorption model, a data-driven model is derived using various machine learning techniques. This model is then incorporated as source terms in the governing conservation equations, resulting in a novel hybrid formulation which is computationally more efficient. Consequently, a new method is presented to compute the temperature and concentration distribution during the charging and discharging of hydrogen tanks and identifying any limiting phenomena more easily.}},
  author       = {{Klepp, Georg Heinrich}},
  booktitle    = {{Energy : the international journal ; technologies, resources, reserves, demands, impact, conservation, management, policy}},
  issn         = {{1873-6785}},
  keywords     = {{Hydrogen storage, Adsorption, Activated carbon, Machine learning, Simulation, Computational fluid dynamics}},
  publisher    = {{Elsevier BV}},
  title        = {{{Modelling activated carbon hydrogen storage tanks using machine learning models}}},
  doi          = {{10.1016/j.energy.2024.132318}},
  volume       = {{306}},
  year         = {{2024}},
}

@misc{11809,
  author       = {{Klepp, Georg Heinrich and Broeker, Timo and Schneidewind, Niko}},
  booktitle    = {{Proceedings of the 12th European Conference on Renewable Energy Systems (ECRES 2024)}},
  editor       = {{Kurt, Erol}},
  location     = {{Palma de Mallorca, Spain}},
  publisher    = {{Erol Kurt}},
  title        = {{{Evaluation of The Techno-Economic Aspects and Sustainability of Integrated  Renewable Energy Systems}}},
  year         = {{2024}},
}

@misc{11810,
  author       = {{Klepp, Georg Heinrich}},
  booktitle    = {{Proceedings of the 12th European Conference on Renewable Energy Systems (ECRES 2024)}},
  editor       = {{Kurt, Erol}},
  location     = {{Palma de Mallorca, Spain}},
  publisher    = {{Erol Kurt}},
  title        = {{{Integration of Solar Stirling in A Multi-Generation and Storage Power System}}},
  year         = {{2024}},
}

@misc{11811,
  author       = {{Klepp, Georg Heinrich}},
  location     = {{Bamberg}},
  title        = {{{Kopplung von CFD mit datengetriebenen Modellen:  Sorption von Wasserstoff}}},
  year         = {{2024}},
}

@misc{11819,
  author       = {{Wolthaus, Sebastian}},
  pages        = {{105}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Das kommerzielle Potenzial deutscher Mythen und Sagen im Film: Eine Analyse für Filmproduzenten}}},
  year         = {{2024}},
}

@misc{11821,
  author       = {{Ludwig, Steffen}},
  pages        = {{102}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Hauntology im Film - Stilistische Merkmale am Beispiel der Berliner Schule}}},
  year         = {{2024}},
}

@misc{11823,
  abstract     = {{This study investigates the macromechanical and micromechanical behavior of oil palm wood by testing the elastomechanical properties in bending, compression parallel and perpendicular and tension parallel and perpendicular to the vascular bundles of small-size test specimen depending on the position within the trunk, the density and the number of vascular bundles per unit area as well as the plantation site. All properties tested show a much higher exponential increase with the density, following power law relationships with exponents > 1, than common wood species and a significant gradient over both trunk height and cross section. Oil palm wood can be seen as a unidirectional long-fiber-reinforced bio-composite, if vascular bundles are considered as reinforcements (fibers) and parenchymatous ground tissue as matrix. The adapted rule-of-mixture based on the number of vascular bundles per unit area can be confirmed for the density, but not for the tensile properties, because the number of vascular bundles per unit area and share of fibers within the bundles is greater in the periphery than in the trunk central tissue. Furthermore, cell wall thickening over time is more pronounced in the peripheral than in the central tissue and more at the bottom than near the top. Different from small test specimens from common wood species, the compression strength exceeds the tensile strength: fc,0 : fm : ft,0 is 1.4 : 2.2–1.2 : 1. The performance indices for minimum weight design by Ashby and coworkers are comparable to that for coconut and date palm wood.}},
  author       = {{Frühwald-König, Katja and Heister, Lena}},
  booktitle    = {{European journal of wood and wood products : Holz als Roh- und Werkstoff }},
  issn         = {{1436-736X}},
  keywords     = {{MECHANICAL-PROPERTIES, STEM, FAILURE}},
  publisher    = {{Springer}},
  title        = {{{Macro- and micromechanical behavior of oil palm wood (Elaeis  guineensis JACQ.): tensile, compression and bending properties}}},
  doi          = {{https://doi.org/10.1007/s00107-024-02131-w}},
  year         = {{2024}},
}

@inbook{11834,
  abstract     = {{Als Einstieg beleuchten wir einige Grundlagen zum Thema Kompetenzmodelle. Zunächst definieren wir den Kompetenzbegriff (Abschn. 3.1). Anschließend geben wir einen Einblick in Kompetenzmodelle der Wissenschaft und Praxis (Abschn. 3.2). In Abschnitt 3.3 identifizieren wir für den Teamerfolg maßgebende Kompetenzen und stellen einen zweistufigen Prozess vor, wie ein praktikables Kompetenzmodell entwickelt werden kann. Im Anschluss überprüfen wir den prädiktiven Wert der von uns identifizierten Kompetenzen für den Teamerfolg anhand einer empirischen Untersuchung (Abschn. 3.4).}},
  author       = {{Agethen, Katharina and Iseke, Anja}},
  booktitle    = {{Digitales und prädiktives Kompetenzmanagement. }},
  editor       = {{Thommes, Kirsten and Iseke, Anja and Schneider, Martin}},
  isbn         = {{978-3-662-68837-3}},
  issn         = {{2523-3645}},
  pages        = {{21--56}},
  publisher    = {{Springer}},
  title        = {{{Kompetenzmodelle: Was wird gemessen?}}},
  doi          = {{10.1007/978-3-662-68838-0_3}},
  year         = {{2024}},
}

@misc{11837,
  author       = {{Mundt, Julian}},
  pages        = {{42}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{LUCID PERCEPTION - Visuelle Selbstwahrnehmung von künstlichen Intelligenz Generatoren unter Inbetrachtnahme der derzeit gültigen Ethikrichtlinien.}}},
  year         = {{2024}},
}

@misc{11841,
  author       = {{Giesbrecht, Emily}},
  pages        = {{93}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Inwiefern ist Social Recruiting ein effektives Werkzeug im OWL-Handwerk im Rahmen der Nachwuchsgewinnung?}}},
  year         = {{2024}},
}

@misc{11844,
  author       = {{Pamuk, Aykut-Rasih}},
  pages        = {{48}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Einfluss der Gestaltung von Werbeanzeigen in sozialen Medien auf die Conversion-Raten und Generierung von Leads}}},
  year         = {{2024}},
}

@misc{11846,
  author       = {{Hafer, Melina}},
  pages        = {{413}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Sympathie und Antipathie im Film - Zuschauerwirkung sowie gestalterische und narrative Möglichkeiten der Unterstützung unter besonderer Berücksichtigung des filmischen Schnitts}}},
  year         = {{2024}},
}

@misc{11848,
  author       = {{Packmohr, Robin}},
  pages        = {{55}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Medienkritik und ihr Einfluss auf Rezipienten am Beispiel Film}}},
  year         = {{2024}},
}

@unpublished{11850,
  abstract     = {{Deployment of Level 3 and Level 4 autonomous vehicles (AVs) in urban environments is significantly constrained by adverse weather conditions, limiting their operation to clear weather due to safety concerns. Ensuring that AVs remain within their designated Operational Design Domain (ODD) is a formidable challenge, making boundary monitoring strategies essential for safe navigation. This study explores the critical role of an ODD monitoring system (OMS) in addressing these challenges. It reviews various methodologies for designing an OMS and presents a comprehensive visualization framework incorporating trigger points for ODD exits. These trigger points serve as essential references for effective OMS design. The study also delves into a specific use case concerning ODD exits: the reduction in road friction due to adverse weather conditions. It emphasizes the importance of contactless computer vision-based methods for road condition estimation (RCE), particularly using vision sensors such as cameras. The study details a timeline of methods involving classical machine learning and deep learning feature extraction techniques, identifying contemporary challenges such as class imbalance, lack of comprehensive datasets, annotation methods, and the scarcity of generalization techniques. Furthermore, it provides a factual comparison of two state-of-the-art RCE datasets. In essence, the study aims to address and explore ODD exits due to weather-induced road conditions, decoding the practical solutions and directions for future research in the realm of AVs.}},
  author       = {{Subramanian, Ramakrishnan and Büker, Ulrich}},
  booktitle    = {{Engineering}},
  publisher    = {{MDPI AG}},
  title        = {{{Study of Contactless Computer Vision-based Road Condition Estimation Methods within the Framework of an Operational Design Domain Monitoring System}}},
  doi          = {{10.20944/preprints202407.2591.v1}},
  year         = {{2024}},
}

@misc{11854,
  author       = {{Schmid, Nina}},
  pages        = {{124}},
  publisher    = {{Technische Hoschule Ostwestfalen-Lippe}},
  title        = {{{Design for the Brain: Die Erforschung der Beziehung zwischen Gehirnprozessen und Wahrnehmung – Wie Neurodesign Innovation im Grafikdesign fördern kann. }}},
  year         = {{2024}},
}

@misc{11857,
  abstract     = {{Diese Bachelorarbeit befasst sich mit der Erweiterung des Marketingkonzepts der MGL LICHT GmbH durch die Integration von Content-Marketing-Strategien, um die Markteinführung eines neuen Schallabsorber-Zubehörprodukts zu unterstützen. Ziel ist es, die Marktpräsenz des Unternehmens im Bereich der Raumakustik zu stärken und neue Kundenkreise zu erschließen. Die Arbeit beginnt mit einer theoretischen Einführung in die Grundlagen des Marketings und des Content Marketings, gefolgt von einer Darstellung des bestehenden Produktportfolios und der aktuellen Marktposition von MGL LICHT. Darauf aufbauend wird ein maßgeschneidertes Content-Marketing-Konzept entwickelt, das verschiedene Formate wie Whitepapers, Social Media Posts und interaktive Inhalte umfasst. Diese Formate werden strategisch entlang der Customer Journey eingesetzt, um die Zielgruppe effektiv anzusprechen und die Kundenbindung zu fördern. Abschließend werden die potenziellen Auswirkungen der vorgeschlagenen Maßnahmen auf die Unternehmensziele sowie die zukünftigen Chancen und Herausforderungen für MGL LICHT diskutiert. }},
  author       = {{Limberg, Robin}},
  pages        = {{82}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Erweiterung des Marketingkonzepts der Firma MGL LICHT GmbH durch Content Marketing – Akquirierung neuer Kunden im Bereich der Raum-Akustik}}},
  year         = {{2024}},
}

@misc{11860,
  author       = {{Katsch, Linda and Sokolowsky, Martina and Schneider, Jan}},
  location     = {{Freising}},
  title        = {{{Zeit-Temperatur-Optimierung in der Saftpasteurisation: Physikalische, chemische und sensorische Effekte auf Apfel- und Karottensaft}}},
  year         = {{2024}},
}

@misc{11861,
  author       = {{Nether, Ulrich and Herrmann, Kristina and Scharfe, Greta Gesine}},
  keywords     = {{Partizipation, Kindertagesstätten Gestaltung, Lehre und Forschung}},
  pages        = {{118}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Raum partizipativ entwickeln - Gestaltung der KiTa Ahornallee}}},
  year         = {{2024}},
}

@misc{11863,
  author       = {{Budde, Markus}},
  pages        = {{140}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Branding Light: Entwicklung einer Markenidentität und Verpackungsdesign für eine individuelle Tischleuchte}}},
  year         = {{2024}},
}

@misc{11865,
  author       = {{Henning, Marvin}},
  keywords     = {{Nostalgie, Psychologie, Magazin, Zeitung, Nostalgia, Nostalgie in Medien, Medienpsychologie, Mediennostalgie}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Nostalgie in Medien – Konzeption und Gestaltung eines crossmedialen Magazins für die Generation Z}}},
  year         = {{2024}},
}

@misc{11869,
  abstract     = {{Diese Bachelorarbeit untersucht die Stärken und Schwächen von Extended Reality (XR). Ziel ist 
es das Potenzial dieser Technologie herauszuarbeiten und den gegenwärtigen Stand der 
Technologie aufzuzeigen. Dazu analysiert die vorliegende Arbeit die bisherige historische 
Entwicklung von XR (VR, AR, MR) aus verschiedenen Perspektiven. Sie geht auf technologische, 
wirtschaftliche Aspekte, sowie auf zukünftige Prognosen ein.  
Im praktischen Teil der Arbeit wurde eine Anwendung in der Programmierumgebung Unity für die 
Oculus Quest 3 entwickelt. Diese soll den gegenwärtigen Stand der XR-Technologie 
veranschaulichen und die theoretischen Erkenntnisse durch eine praxisnahe Umsetzung 
untermauern.}},
  author       = {{Kramer, Anna}},
  keywords     = {{XR, VR, AR, MR, Unity}},
  pages        = {{56}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Stärken und Schwächen der XR Technologie: Eine Analyse der  Entwicklung von XR mit Fokus auf Pass Through und Screen Scripting der Quest 3}}},
  year         = {{2024}},
}

@misc{11873,
  abstract     = {{Der Beitrag stellt die Funktionalität und technische Architektur eines prototypischen GIS-basierten Entscheidungsunterstützungssystems vor, das dabei helfen soll, Maßnahmen zur Minderung von Treibhausgasemissionen durch Bauen und Sanieren mit Holz als Baumaterial auf der kommunalen Ebene zu bewerten und zu planen. In verschiedenen WebGIS-basierten Ansichten und Dashboards können die möglichen Klimaschutzeffekte durch Bauen und Sanieren mit Holz als Baustoff für eine Stadt, einzelne Gebäude, beliebige Agglomerationen oder auch für bestimmte Bebauungspläne in der Kommune abgeschätzt und ausgewertet werden. Diese möglichen Klimaschutzeffekte ergeben sich in den Kalkulationsszenarien Neubau bzw. energetische Sanierung bspw. durch Einsparungen im Betrieb (Heizung und Warmwasserbereitung), durch CO2-Speicherung im Baumaterial und durch den Ersatz der vergleichsweise klimabelastenden mineralischen Bauweise.}},
  author       = {{Mattes, Christoph and Zernicke, Caya and Abecker, Andreas and Hafner, Annette  and Jolk, Christian and Stolpe, Harro  and Zemann , Moritz }},
  booktitle    = {{Umweltinformationssysteme - Digitalisierung im Zeichen des Klimawandels und der Energiewende (UIS 2023)}},
  editor       = {{Fuchs-Kittowski, Frank and Abecker, Andreas and Hosenfeld, Friedel and Reineke, Anja and Jolk, Christian}},
  keywords     = {{Entscheidungsunterstützungssystem, Geodatenanalyse, GIS, Holzbau, Treibhausgasemissionsminderung, Kommunales Klimaschutzkonzept}},
  location     = {{Höxter}},
  pages        = {{167--184}},
  publisher    = {{Springer}},
  title        = {{{Holzbau-GIS: Ein Prototyp zur Darstellung von Treibhausgasminderungspotenzialen auf der städtischen Ebene durch Nutzung von Holz als Baumaterial}}},
  doi          = {{10.1007/978-3-658-43735-0_12}},
  year         = {{2024}},
}

@proceedings{11874,
  abstract     = {{Der neueste Stand der Forschung und Entwicklung auf dem Gebiet der Umweltinformatik (UI) und umweltbezogener IT-Anwendungsbereiche wird in diesem Tagungsband präsentiert und kritisch diskutiert. Dies umfasst sowohl Konzepte und Anwendungen von Umweltinformationssystemen als auch Technologien, die moderne Umweltinformationssysteme unterstützen und ermöglichen.}},
  editor       = {{Fuchs-Kittowski, Frank and Abecker, Andreas and Hosenfeld, Friedhelm and Reineke, Anja and Jolk, Christian}},
  isbn         = {{978-3-658-43734-3}},
  keywords     = {{Computer Science, Informatics, Conference Proceedings, Research, Applications, Visualisierung von Umweltdaten, Datenanalyse mit Umweltinformationssystemen, Umweltbezogene Daten}},
  location     = {{Höxter}},
  pages        = {{302}},
  publisher    = {{Springer}},
  title        = {{{Umweltinformationssysteme - Digitalisierung im Zeichen des Klimawandels und der Energiewende (UIS 2023) }}},
  doi          = {{10.1007/978-3-658-43735-0}},
  year         = {{2024}},
}

@misc{11879,
  author       = {{Jolk, Christian and Haelke, Tobias and Timmer, Mirco and Kaußen, Lucas}},
  location     = {{Bamberg}},
  title        = {{{Digitale Zwillinge in der Landschaftsarchitektur und der Umweltplanung – Fallbeispiele aus Lehre und Forschung}}},
  year         = {{2024}},
}

@misc{11886,
  author       = {{Van Massenhove, Tamina}},
  pages        = {{93}},
  publisher    = {{Technische Hochschule OWL}},
  title        = {{{Nachhaltig Leben: Die Konzipierung einer geführten Nachhaltigkeits-App zur Förderung von Umweltbewusstsein im Alltag. }}},
  year         = {{2024}},
}

@misc{11887,
  author       = {{Mönnig, Franziska}},
  pages        = {{98}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Zwischen Realität und Emotion: Eine Formatanalyse von Realityshows mit Fokus auf audiovisuelle Emotionen im Fernsehen}}},
  year         = {{2024}},
}

@misc{11891,
  abstract     = {{The aim of the present study was to texturise protein from sunflower press cake (SPC) for being consumed as dry snack or, in its hydrated state, as a meat analogue. In preliminary experiments, feed moisture (15–25 g 100 g−1) and extrusion temperature (180 °C–200 °C) were varied when processing commercial sunflower protein flour with a protein content of 51.8 g per 100 g dry matter using low moisture single-screw extrusion. The extrudates were analysed with regard to specific mechanical energy needs, texture properties in dry and hydrated state, colour, expansion ratio and water binding capacity. Extrusion parameters for achieving maximum expansion, textural force and minimal product moisture were found to be 180 °C and 15 g 100 g−1. Consequently, texturised protein was derived from deoiled SPC using these extrusion parameters. Initial deoiling of the press cake was necessary as it improved texturisation; a higher SME input reached led to increased cross-linking of the protein matrix. The light coloured and significantly expanded extrudates with high water binding capacity and could serve as basis for further development of snack products or meat analogues.}},
  author       = {{Morejon Caraballo, Sophie and Fischer, Simon Vincent and Masztalerz, Klaudia and Lech, Krzysztof and Rohm, Harald and Struck, Susanne}},
  booktitle    = {{International journal of food science & technology}},
  issn         = {{1365-2621}},
  keywords     = {{By-products, extrusion, meat analogue}},
  publisher    = {{Wiley-Blackwell}},
  title        = {{{Low moisture texturised protein from sunflower press cake}}},
  doi          = {{ https://doi.org/10.1111/ijfs.17513}},
  year         = {{2024}},
}

@misc{11893,
  author       = {{Schöning, Matthias}},
  pages        = {{84}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Die Rolle der Bildgestaltung in der Darstellung innerer Konflikte und Emotionen im szenischen Film}}},
  year         = {{2024}},
}

@misc{11895,
  abstract     = {{Durch die Corporate Sustainability Reporting Directive (CSRD) wird eine verbindliche Nachhaltigkeitsberichterstattung bei großen Kapitalgesellschaften und bei kapitalmarktorientierten kleinen und mittelgroßen Kapitalgesellschaften eingeführt. In Zukunft werden auch zahlreiche kleine und mittelgroße Unternehmen mittelbar zur Nachhaltigkeitsberichterstattung verpflichtet. In diesem Zusammenhang veröffentlichte die European Financial Reporting Advisory Group (EFRAG) im Januar 2024 einen Konsultationsentwurf eines Standards für die freiwillige Nachhaltigkeitsberichterstattung nicht-kapitalmarktorientierter KMU (VSME ESRS ED). Der vorliegende Beitrag stellt den Inhalt dieses Standards vor und würdigt ihn aus konzeptionellen und anwendungsorientierten Gesichtspunkten.}},
  author       = {{Stawinoga, Martin and Pasch, Lilia}},
  booktitle    = {{Zeitschrift für Corporate Governance}},
  issn         = {{1868-7792}},
  number       = {{4}},
  pages        = {{180--185}},
  publisher    = {{Erich Schmidt Verlag}},
  title        = {{{Standardentwurf zur freiwilligen Nachhaltigkeitsberichterstattung von KMU – Eine Analyse des VSME ESRS Konsultationsentwurfs}}},
  doi          = {{10.37307/j.1868-7792.2024.04.08}},
  year         = {{2024}},
}

@misc{11898,
  author       = {{Fiss, Maximilian}},
  keywords     = {{Branding, EDM, Elektronische Musik, Cover Art, Cover Art Maskottchen}},
  pages        = {{122}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Human Branding im Genre EDM}}},
  year         = {{2024}},
}

@misc{11902,
  author       = {{Bauer, Dustin}},
  pages        = {{51}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Ursprung und Bedeutung des Aspect Ratios in der Kinematographie}}},
  year         = {{2024}},
}

@misc{11909,
  author       = {{Tholen, Janna and Bruns, Michael and Upmann, Matthias}},
  booktitle    = {{Rundschau für Fleischhygiene und Lebensmittelüberwachung (RFL)}},
  issn         = {{0178-2010 }},
  number       = {{9}},
  pages        = {{302--304}},
  publisher    = {{M.& H. Schaper GmbH}},
  title        = {{{Einfluss der Automatisierung des Enddarmbohrers auf den dorsalen Kontaminationsanteil bei der Schweineschlachtung}}},
  volume       = {{76}},
  year         = {{2024}},
}

@misc{11910,
  author       = {{Upmann, Matthias and Weyland, Gerd}},
  booktitle    = {{Fleischwirtschaft}},
  issn         = {{0015-363X }},
  number       = {{9}},
  pages        = {{14--21}},
  publisher    = {{Deutscher Fachverlag}},
  title        = {{{Was ist erlaubt, was verboten? 19. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - 1. Teil}}},
  volume       = {{104}},
  year         = {{2024}},
}

@misc{11911,
  abstract     = {{Im Herbst 2021 wurden 627 Schweineschlachtkörper verschiedener Hybridrassen mit einem durchschnittlichen Schlachtgewicht von  etwa 95 kg mit visuell erfassbaren Kontaminationen nach der Eviszeration in einem industriellen Schlachthof im Nordwesten Deutschlands untersucht. Die Datenaufnahme erfolgte direkt an der Schlachtlinie zwischen der Eviszeration und dem Podest für die amtliche Fleischuntersuchung. Zwei geschulte Personen prüften die ausgenommenen, aber noch nicht gespaltenen Tierkörper visuell von kranial nach kaudal: Eine Person beurteilte die Bauch-, die andere die Rückenseite. Festgestellte Kontaminationen waren Darminhalt, Galle, Mageninhalt, Rohrbahnfett und „Sonstiges“ – vor allem ein rötlicher Schaum aus den Atemwegen. Für jede Kontaminationsart wurde deren flächenmäßige Ausdehnung und Lokalisation erfasst. Bei insgesamt 103 der 627 kontaminierten Tiere wurde mehr als eine Kontamination festgestellt, sodass insgesamt 754 Kontaminationen detektiert wurden. Etwa die Hälfte der Kontaminationen war auf Darminhalt zurückzuführen, ein Drittel auf „Sonstiges“. Bei der Lokalisation machten Vordergliedmaße, Rücken und Schinken zusammen 70% aus. 86% der Kontaminationen hatten einen kleineren Durchmesser als 23 mm. Die Erfassung der visuell detektierbaren Kontaminationen stellt die Grundlage für weitergehende Untersuchungen zur hygienischen Qualitätsverbesserung der Schlachtprozesse dar.}},
  author       = {{Tholen, Janna and Große-Kleimann, Julia and Schulze Althoff, Gereon and Kreienbrock, Lothar and Upmann, Matthias}},
  booktitle    = {{Fleischwirtschaft}},
  issn         = {{0015-363X}},
  number       = {{4}},
  pages        = {{71--76}},
  publisher    = {{Deutscher Fachverlag}},
  title        = {{{Ausdehnung und Lokalisationen diverser Kontaminationsarten auf industriell geschlachteten Schweinekörpern}}},
  volume       = {{104}},
  year         = {{2024}},
}

@misc{11912,
  author       = {{Tholen, Janna and Upmann, Matthias}},
  booktitle    = {{Journal of Food Safety and Food Quality}},
  issn         = {{0003-925X}},
  number       = {{6}},
  pages        = {{156--160}},
  publisher    = {{M. & H. Schaper}},
  title        = {{{Einfluss eines Hygiene-Rückmeldesystems während der Schweineschlachtung auf die Häufigkeit auftretender Schlachtkörperverunreinigungen}}},
  doi          = {{10.53194/0003-925X-75-156}},
  volume       = {{75}},
  year         = {{2024}},
}

@misc{11913,
  author       = {{Tscherkaschin, Alina Nina}},
  pages        = {{43}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Filterblasen auf Social Media - Die Auswirkungen der algorithmischen Personalisierung auf TikTok auf die Meinungsbildung von Jugendlichen}}},
  year         = {{2024}},
}

@misc{11915,
  abstract     = {{With the human factor being identified as the weakest link in the chain of information security, we investigate the effects of the COVID-19 pandemic on approaches to develop awareness trainings. Following the literature approach of vom Brocke, we identify five focus areas in recent literature which we are able to divide further into supporting effects and human factors for information security awareness trainings. Furthermore, we identify research gaps in current literature which can inspire future investigations.}},
  author       = {{Meister, Robin and Guhr, Nadine}},
  booktitle    = {{Wirtschaftsinformatik 2024 Proceedings}},
  keywords     = {{Information Security, Literature Review, Human Factor, Education, Awareness}},
  location     = {{Würzburg}},
  pages        = {{16}},
  publisher    = {{WI}},
  title        = {{{Recent Insights in Information Security Awareness Training: A Systematic Literature Review }}},
  year         = {{2024}},
}

@misc{11917,
  author       = {{Pavkovic, Niklas}},
  pages        = {{37}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Die Bedeutung der K.I.-generierten Berichterstattung im Amateurfußball }}},
  year         = {{2024}},
}

@misc{11920,
  author       = {{Gora, Clarissa}},
  pages        = {{99 }},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Male Gaze : Wie der männliche Blick in Film und Fernsehen unterbewusst Sehstrukturen definiert und wie sich diese auf die Gesellschaft auswirken}}},
  year         = {{2024}},
}

@book{11926,
  author       = {{Köhler, Martin}},
  isbn         = {{978-3-86446-390-7}},
  pages        = {{21}},
  publisher    = {{Forschungsgesellschaft für Straßen- und Verkehrswesen e. V. }},
  title        = {{{Merkblatt für Bankettbefestigungen mit vorgefertigten Befestigungslementen = M BB}}},
  volume       = {{625. R 2}},
  year         = {{2024}},
}

@misc{11928,
  abstract     = {{Im Rahmen der Voruntersuchung des Erprobungs- und Entwicklungsvorhabens „Grüne Infrastruktur in ländlichen Regionen“ (im Folgenden „E+E-Vorhaben“ genannt) wurde eine Analyse der Erholungsfunktion der Landschaft im Kreis Lippe durchgeführt, bei welcher das räumliche Verhältnis des Erholungspotenzials, welches maßgeblich durch die ästhetische Qualität der Landschaft geprägt wird, gegenüber der Erholungsnachfrage, d. h. dem Naherholungsdruck, untersucht worden ist. Dazu wurden GIS-gestützte Modelle und Analysemethoden entwickelt und angewandt, wobei die Programme „ArcMap“ und „ArcGIS Pro“ sowie „ArcGIS Online“ verwendet wurden.

Für die Analyse des Erholungspotenzials wurde zunächst der ästhetische Gesamtwert der Landschaft ermittelt, wobei ein modifizierter AIGILaP-Ansatz [1,2,3] angewandt wurde. Weiterhin wurde die Erholungsinfrastruktur untersucht, sodass sich die Bewertung des Erholungspotenzials aus der Aggregation der Bewertungen des ästhetischen Gesamtwertes einerseits und der Erholungsinfrastruktur andererseits ergab. Zur Ermittlung der Erholungsnachfrage wurden Erreichbarkeitsanalysen für verschiedene Verkehrsmittel (Fahrrad, Elektrofahrrad, Fußgänger, PKW) durchgeführt. Das Erholungspotenzial und die Erholungsnachfrage wurden abschließend überlagert, sodass prioritäre Räume der Erholung im Kreis Lippe identifiziert werden konnten.

Die Nutzung von GIS-basierten Modellen und Analysemethoden ermöglichte die detaillierte Analyse der Erholung im Kreis Lippe, wobei verschiedene Datenbestände mit unterschiedlichem Detaillierungsgrad verwendet wurden. Dabei erwies sich die rasterbasierte Herangehensweise als sehr effizient, da diese u. a. die Harmonisierung der Datensätze vereinfachte. Von besonderer Bedeutung war zudem die grafische Überlagerung der Ergebnisse des Erholungspotenzials und der Erholungsnachfrage, welche die Identifizierung der prioritären Räume der Erholung ermöglichte. Die Ableitung dieser Räume war für das weitere Vorgehen im Projekt maßgeblich, da in der im Anschluss an die Analyse erfolgten Synthese die prioritären Räume der Themenschwerpunkte Biotopverbund, Kulturlandschaft und Erholung überlagert und räumlich-sachliche Verbindungen, Synergien und Konflikte identifiziert wurden.}},
  author       = {{Behre, Evelyn and Stemmer, Boris}},
  booktitle    = {{Umweltinformationssysteme - Digitalisierung im Zeichen des Klimawandels und der Energiewende (UIS 2023) }},
  editor       = {{Fuchs-Kittowski, Frank and Abecker, Andreas and Hosenfeld, Fridel and Reineke, Anja and Jolk, Christian}},
  isbn         = {{978-3-658-43734-3}},
  keywords     = {{GIS, Erholungsfunktion, Erholungspotenzial, Erholungsnachfrage, Naherholung, Grüne Infrastruktur}},
  location     = {{Höxter}},
  pages        = {{81--102}},
  publisher    = {{Springer Fachmedien Wiesbaden}},
  title        = {{{Nutzung von Geoinformationssystemen bei der Analyse des Erholungswertes der Landschaft im Kreis Lippe}}},
  doi          = {{10.1007/978-3-658-43735-0_6}},
  year         = {{2024}},
}

@misc{11929,
  abstract     = {{Starkregenereignisse haben das Potenzial, erhebliche Mengen organischen Materials mit sich zu tragen, und können dadurch für enormen Schlammeintrag und Wassermassen in der Talsohle sorgen. Mit dem Wissen, wo Oberflächenabfluss entsteht und welche Faktoren einen Einfluss auf die Abflussbildung haben, können Maßnahmen geplant werden, die eine Sturzflut noch vor dem Entstehen verhindern oder zumindest abmildern. Für flächendeckende Analysen ist eine entsprechende Datenbasis notwendig. Als relevante Einflussparameter wurden anhand der Literatur folgende Informationen ausgewählt: Klima, Relief, Bodenkunde, Geologie, Landnutzung, Bodenverdeckung und Oberflächenverschlämmung sowie Bodenbearbeitungs(-systeme). Für diese Schlagworte wurde eine Datenrecherche hinsichtlich Verfügbarkeit und Qualität für die Bundesländer Nordrhein-Westfalen (NRW) und Niedersachsen (NDS) durchgeführt. Die Datenrecherche hat ergeben, dass flächendeckend eine Vielzahl an nützlichen Geodaten − vor allem für landwirtschaftliche Flächen − vorhanden sind. Die Informationslage kann dabei zum Zeitpunkt der Recherche in NRW insgesamt als besser bewertet werden. Es wurden nicht nur mehr Datensätze gefunden, sondern teilweise auch solche, die im Vergleich zu NDS deutlich detaillierter sind. Bezüglich der direkten Verfügbarkeit als Download oder Webdienst wurde festgestellt, dass in NDS die Mehrheit der Datensätze zum Zeitpunkt der Recherche nur auf Anfrage und verbunden mit Gebühren erhältlich sind.}},
  author       = {{Pilar von Pilchau, Katharina and Maas, Klaus and Weber, Verena}},
  booktitle    = {{Umweltinformationssysteme - Digitalisierung im Zeichen des Klimawandels und der Energiewende (UIS 2023)}},
  editor       = {{Fuchs-Kittowski, Frank and Abecker, Andreas and Hosenfeld, Friedhelm and Reineke, Anja and Jolk, Christian}},
  isbn         = {{978-3-658-43734-3}},
  keywords     = {{Starkregen, OpenData, Fließwege, Dominant Runoff Process, Ländlicher Raum}},
  location     = {{Höxter}},
  pages        = {{155--166}},
  publisher    = {{Springer Fachmedien Wiesbaden}},
  title        = {{{Verfügbarkeit, Qualität und Informationsgehalt von Geodaten für eine Fließweganalyse im Kontext Starkregen im ländlich geprägten Raum}}},
  doi          = {{10.1007/978-3-658-43735-0_11}},
  year         = {{2024}},
}

@misc{11931,
  author       = {{Kölbel, Carolin}},
  pages        = {{56}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Was macht ein erfolgreiches B2B-Social-Media-Marketing aus? – Strategien, Maßnahmen und Umsetzung mit der Entwicklung eines Guides am Beispiel Instagram}}},
  year         = {{2024}},
}

@misc{11934,
  abstract     = {{The application of hydrogen in order to store energy and as a vehicle fuel requires efficient and effective storage technologies. An alternative solution to cryogenic and high pressure tanks is the use of porous material and physisorption (carbons, metal organic frameworks) or chemisorption (hydrides) in the tank. Due to the heat of sorption the temperature and its distribution in the tank might vary significantly during charging and discharging, affecting the storage capacity. The flow of the hydrogen in the tank is described by the equation of mass conservation, the Navier-Stokes equations and the equation of energy conservation as implemented in a CFD code. In the conservation equation additional terms are implemented in order to account for the amount of hydrogen involved in the sorption and the corresponding heat of sorption. These result from the mass and energy balance for the hydrogen in a finite volume whereat the equilibrium is described by an appropriate sorption isotherm. The use of data driven models is often computationally more advantageous then physical models. Based on the physical adsorption model a data driven model is derived using different machine learning techniques. This model is implemented as source terms in the governing equations, leading to a computationally more advantageous formulation. Thus the distribution of temperature and concentration during charging and discharging of the tanks is computed and limiting phenomena are identified.}},
  author       = {{Klepp, Georg Heinrich and Filippi, Markus and Langer, Guido}},
  booktitle    = {{	 Advances in Computational Heat and Mass Transfer : Proceedings of the 14th International Conference on Computational Heat and Mass Transfer (ICCHMT 2023), 4-8 September, 2023, Düsseldorf, Germany, Volume 1 }},
  editor       = {{Benin, Ali Cemal and Bennacer, Rachid  and Mohamad, Abdulmajeed A.  and Ocłoń, Paweł  and Suh, Sang-Ho  and Taler, Jan }},
  location     = {{Düsseldorf}},
  pages        = {{480 -- 488}},
  publisher    = {{Springer}},
  title        = {{{Charging and Discharging of Hydrogen Sorption Tanks}}},
  doi          = {{10.1007/978-3-031-67241-5_43}},
  year         = {{2024}},
}

@misc{11940,
  abstract     = {{Bildungsbereiche – etwa der akademische Bereich, der schulische Bildungsbereich oder der Bereich der sog. IHK-Weiterbildung – sind im deutschen Bildungssystem traditionell wenig vernetzt. Mit den Bildungsbereichen verbunden sind Lernorte. Für eine attraktive Berufsbildung kann eine gelingende Kooperation von beruflichen Schulen, betrieblicher Bildung einschließlich überbetrieblicher Bildung, Hochschule oder Akademien als essenziell angenommen werden. Ein Workshop der HTBB 2023 greift die Vernetzung dieser Bildungsbereiche und Lernorte vor dem Hintergrund zweier InnoVET-Projekte, Bildungsbrücken OWL und BIRD, auf.
Der vorliegende Beitrag bietet einen Überblick über die auf der Tagung präsentierten Vernetzungsansätze und Handlungsfelder und nimmt Bezug auf die Projekterfahrungen und auf die Ergebnisse aus dem Tagungsworkshop. Konkret beschäftigt er sich mit der bereichsübergreifenden Bedarfserhebung als Ausgangslage für die Fortbildung zur „Geprüften Berufsspezialistin“ bzw. zum „Geprüften Berufs-spezialisten“ (BIRD), der Konzeption eines Instruments zur Gestaltung bildungsbereichsübergreifender Orientierungsangebote (BIRD), den Herausforderungen und Gestaltungsansätzen bildungsbereichs-übergreifender didaktischer Planungen (BIRD), der Evaluation bildungsbereichsübergreifender Bildungsangebote im Blended-Learning-Design (BIRD) und (5) den Gelingensbedingungen für eine bildungsbereichsübergreifende Vernetzung für gemeinsame Bildungsformate (Bildungsbrücken OWL). Der Beitrag schließt mit einem gemeinsamen Fazit und Ausblick.}},
  author       = {{Hager, Anna and Müller, Franziska and Renner, Moritz and Schächtner, Stefanie and Schneider, Birgit and Thies, Katharina}},
  booktitle    = {{Berufs- und Wirtschaftspädagogik Online : bwp@}},
  issn         = {{1618-8543}},
  keywords     = {{Bildungsbereichsübergreifende Kooperation, Vernetzung, berufliche Bildung, Qualifizierung, bereichsübergreifende Bildungsangebote}},
  location     = {{Bamberg}},
  number       = {{Teil 4}},
  publisher    = {{Institut für Berufs- und Wirtschaftspädagogik Universität Hamburg }},
  title        = {{{Exzellente Qualifizierung durch bildungsbereichsübergreifende Vernetzung: Erfahrungen und Konzepte aus den InnoVET-Projekten BIRD und Bildungsbrücken OWL}}},
  volume       = {{Spezial HT2023}},
  year         = {{2024}},
}

@misc{11954,
  abstract     = {{Die vorliegende Arbeit untersucht den Einfluss von visuellen und auditiven Inhalten in TikTok Videos auf die Kaufabsichten der Generation Z. Die Forschung soll die ausschlaggebenden Elemente und deren Wirkung auf die Kaufentschei-dungen in TikTok Videos identifizieren. Sie basiert auf einer ausführlichen Literatur-recherche, die, die Wirkung verschiedener Komponenten wie Musik, visuelle Ef-fekte und der sprechenden Person analysiert. Die Analyse zeigt, dass besonders Musik und visuelle Effekte eine signifikante Rolle bei der Beeinflussung der Kauf-entscheidungen spielen. Darüber hinaus sind die Authentizität des Influencers und die Kürze der Videos entscheidende Faktoren für eine positive Kaufabsicht. Diese Ergebnisse geben wertvolle Einblicke für Marketer und Unternehmen, die ihre Werbestrategien auf TikTok gezielt verbessern möchten. Die Arbeit liefert so-mit wichtige Erkenntnisse für die Entwicklung effektiver Marketingstrategien für die Plattform und trägt zur aktuellen Forschung im Bereich des Affiliate-Marke-tings und der Medienwirkung bei. }},
  author       = {{Diekmann, Greta}},
  pages        = {{41}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Medieninhalte und Kaufverhalten : Inwiefern beeinflussen visuelle und auditive Inhalte in TikTok-Videos  die Kaufabsichten von Generation Z in Bezug auf Lifestyle-Produkte?}}},
  year         = {{2024}},
}

@misc{11963,
  author       = {{Kindler, Jann}},
  pages        = {{214}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Der IT-Faktor bei Influencer:innen über das Generieren von Wachstum durch Zuschauer- und Followerinteraktion}}},
  year         = {{2024}},
}

@misc{11967,
  author       = {{Siquilini, Jeremy}},
  pages        = {{50}},
  publisher    = {{Technische Hoschschule Ostwestfalen-Lippe}},
  title        = {{{Die Effektivität des mobilen Journalismus: Mobile Berichterstattung und Auswirkungen auf den Workflow und die Qualität der journalistischen Arbeit}}},
  year         = {{2024}},
}

@inbook{11969,
  abstract     = {{Für eine exzellente berufliche Bildung sind Kooperationen zwischen den Lernorten der beruflichen Bildung, sowie Kooperationen mit der akademischen Bildung grundlegend. Die Ermöglichung neuer Lernortkooperationen ist Teil des InnoVET-Projekts Bildungsbrücken OWL. 
Um das Lehrenden-Matchmaking als Grundlage für neue Lernortkooperationen zu unterstützen, ist im Projekt ein Zielgruppen-Matrixtool entwickelt worden. Das Tool schafft eine Übersicht über die zentralen Handlungsbedingungen der Lehrpersonen an den verschiedenen Lernorten. In der Planungsphase von Lernortkooperationen lassen sich mit der Matrix Zielstellungen und Rahmenbedingungen der jeweiligen Lernorte gegenüberstellen. Gelingensbedingungen können verdeutlicht werden, Stolpersteine lassen sich im laufenden Prozess aufdecken und können aus dem Weg geräumt werden, um ein Scheitern der Realisierung zu verhindern. }},
  author       = {{Meyer, Kirsten and Schneider, Birgit and Claes, Svenja}},
  booktitle    = {{Screts unLOKed : Gemeinsam stark für Azubis - (Digitale) Erfolgsstrategien für Lehrkräfte und Ausbildende in der LernOrtKooperation}},
  editor       = {{Medvedieva, Tetiana and Tänzel, Marit}},
  pages        = {{51}},
  publisher    = {{InnoVET-Projekt „Bottom-Up statt Top-Down – Fachkarrieren neu gedacht“}},
  title        = {{{InnoVET-Projekt Bildungsbrücken OWL : Lehrenden-Matchmaking als Grundlage für Lernortkooperation – ein Zielgruppen-Matrixtool}}},
  year         = {{2024}},
}

@misc{11972,
  abstract     = {{As companies increasingly adopt software applications to improve business efficiency, often digitization gaps arise when legacy systems fail to integrate with new applications. These gaps often result in redundant task execution across incompatible systems. Robotic Process Automation (RPA) emerges as a solution by automating such tasks. However, selecting the right processes that will be subjected to RPA is crucial to avoid failures and resource waste. Therefore, this paper introduces a four-stage method to evaluate processes for RPA suitability, grounded on the Analytic Hierarchy Process (AHP). By systematically analyzing scientific literature and incorporating weights from RPA experts, this paper sheds light on the complex nature of process selection criteria for RPA. Tested in a company, the method facilitates the process selection, indicating its practical applicability.}},
  author       = {{Meyer, Frederic and Hinrichsen, Sven and Padoano, Elio}},
  booktitle    = {{Human Systems Engineering and Design (IHSED2024): Future Trends and Applications}},
  editor       = {{Ahram, Tareq  and Karwowski, Waldemar  and Etinger, Darko  and Mijač, Tea }},
  isbn         = {{978-1-964867-34-2}},
  issn         = {{2771-0718}},
  keywords     = {{Analytic Hierarchy Process (AHP), Evaluation Method, MCDM, Robotic Process Automation (RPA), Selection Criteria, Systematic Literature Review (SLR)}},
  location     = {{Split}},
  publisher    = {{AHFE International}},
  title        = {{{A Structured Method for the Selection of Business Processes Suitable for Robotic Process Automation}}},
  doi          = {{10.54941/ahfe1005524}},
  volume       = {{158}},
  year         = {{2024}},
}

@misc{11973,
  author       = {{Oexmann, Sarah}},
  pages        = {{155}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{TWINS - Konzeption und Umsetzung eines Kartenspiels unter Betrachtung des Zusammenhangs zwischen Hand und Gedächtnis}}},
  year         = {{2024}},
}

@misc{11977,
  abstract     = {{Additive manufacturing of lenses offers quick prototyping and characterization. This paper explains the additive manufacturing and characterization of axicon lenses using TOPAS material for Terahertz sensing applications. The beam patterns of additively manufactured axicon lens prototypes are characterized around 0.3 THz with silicon-based THz-camera to evaluate the depth of focus.}},
  author       = {{Shrotri, Abhijeet Narendra and Krause, Benedikt and Stübbe, Oliver and Pfeiffer, Ullrich and Preu, Sascha}},
  booktitle    = {{2024 49th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)}},
  issn         = {{2162-2035}},
  keywords     = {{Additives, Prototypes, Three-dimensional printing, Sensors, Lenses}},
  location     = {{Perth, Australia }},
  publisher    = {{IEEE}},
  title        = {{{Evaluation of Additively Manufactured Axicon Lenses Using a THz-Camera}}},
  doi          = {{10.1109/irmmw-thz60956.2024.10697740}},
  volume       = {{2024}},
  year         = {{2024}},
}

@misc{11978,
  author       = {{Gossen, Arthur and Katsch, Linda and Meyer, Mandy Isabel and Zimmer, Manuel and Bator, Martyna and Darvishi, Masoumeh and Holst, Christoph-Alexander and Lohweg, Volker and Schneider, Jan}},
  location     = {{Lemgo}},
  title        = {{{FoodLifeTimeTracking: Datengetriebene dynamische Haltbarkeitsvorhersage von Erfrischungsgetränken}}},
  year         = {{2024}},
}

@misc{11981,
  author       = {{Katsch, Linda and Gossen, Arthur and Bator, Martyna and Schneider, Jan}},
  location     = {{Bruges}},
  title        = {{{Shelf life prediction of beverage bases with multivariate accelerated shelf life testing}}},
  year         = {{2024}},
}

@misc{11982,
  abstract     = {{The aim of this study was to investigate if vibroacoustic methods may be used for the non-destructive determination of beef during its aging process. The vibroacoustic method was based on the observation of mechanical changes in the meat during the aging process and was compared with reference data obtained by Warner-Bratzler shear force measurement as well as sensory testing of the tenderness using a ten-part scale. To evaluate the mechanical properties, transfer functions were used representing the time dependency of the signal and thus the viscoelastic behaviour. In this study, a total of 31 roastbeef samples from 16 different young bulls and two older cows were examined from day of slaughter to day 21 of cold storage with regard to their tenderness. For this purpose, vibroacoustic measurements were carried out on the unprocessed/raw meat at intervals of 1–3 days. The reference measurements using sensor technology and Warner-Bratzler shear force measurement were carried out on the first (day of slaughter) and last (21st day) day on slices of roast beef cooked with saturated steam. In the results of all three methods, the shear force measurement, the sensory test and the vibroacoustic method, showed that roastbeef from the same animal but different halves produced different results. Basically, it is possible to predict the tenderness of roastbeef by taking measurements at the beginning of the maturing process for the end of the maturing period using vibroacoustic methods: Data analysis led to a trend function that roughly reflects the actual tenderness, which is generally higher than the real tenderness represented by the shear-force measurement. In order to obtain a better resolution for recording the mechanical changes during the aging process, the measurements should be carried out at shorter intervals.}},
  author       = {{Tholen, Janna and Gohe, Jan and Dörksen, Helene and Kiesel, Theo and Upmann, Matthias}},
  booktitle    = {{Food Physics}},
  issn         = {{2950-0699}},
  keywords     = {{Warner-Bratzler shear force, Vibroacoustic methods, Non-destructively measurement, Viscoelastic meat}},
  number       = {{1}},
  publisher    = {{Elsevier}},
  title        = {{{Tenderness prediction for beef using novel datea analysis methods based on system dynamic and acoustic signals}}},
  doi          = {{10.1016/j.foodp.2024.100017}},
  year         = {{2024}},
}

@misc{11985,
  abstract     = {{ Die vorliegende Offenbarung betrifft ein Verfahren zur Temperaturprognose und/oder Wärmebedarfsprognose eines Gebäudes, umfassend Bereitstellen einer gemessenen Innentemperatur in dem Gebäude; Bereitstellen einer Außentemperatur in Umgebung des Gebäudes; Bereitstellen einer in das Gebäude eingebrachten Wärmemenge; Bereitstellen eines thermischen Modells des Gebäudes, wobei das thermische Modell die folgenden drei Modellparameter aufweist: einen Wärmewiderstand für einen Wärmeübergang von innerhalb des Gebäudes nach außerhalb des Gebäudes; einen Koeffizienten zur Beschreibung eines solaren Wärmeeintrags, und eine Wärmespeicherkapazität des Gebäudes. Das Verfahren umfasst einen Schritt des Anpassens der Modellparameter des thermischen Modells, derart, dass das thermische Modell den Zusammenhang zwischen Innentemperatur, Außentemperatur und Wärmemenge approximiert. }},
  author       = {{Bast, Oliver and Bollhöfer, Fynn Christian and Franzen, Lion and Knoop, Michael and Üpping, Johannes}},
  pages        = {{29}},
  title        = {{{Verfahren zur Temperaturprognose und/oder Wärmebedarfsprognose eines Gebäudes und Wärmepumpe}}},
  year         = {{2024}},
}

@misc{11987,
  author       = {{Harte, Tim}},
  pages        = {{39}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{BEGLEITUNG EINES BRETTSPIELS VON KONZEPTION BIS PRODUKTION}}},
  year         = {{2024}},
}

@misc{11990,
  author       = {{Struck, Susanne}},
  location     = {{Lemgo}},
  title        = {{{Proteinbasierte Lebensmittel: Synergien zwischen pflanzlichen und tierischen Proteinen in Forschung und Lehre}}},
  year         = {{2024}},
}

@misc{11991,
  author       = {{Morejón Caraballo, Sophie and Trültzsch, Stephanie and Rohm, Harald and Struck, Susanne}},
  location     = {{Lemgo}},
  title        = {{{Trockenfraktionierung von Sonnenblumenpresskuchen zur Proteinanreicherung}}},
  year         = {{2024}},
}

@misc{11992,
  author       = {{Morejón Caraballo, Sophie and Rohm, Harald and Struck, Susanne}},
  location     = {{Lemgo}},
  title        = {{{Aufwertung von Nebenprodukten der Öl- und Käseherstellung mittels Fermentation}}},
  year         = {{2024}},
}

@misc{11993,
  author       = {{Sert Tuncer, Deniz and Struck, Susanne and Rohm, Harald}},
  location     = {{Apeldoorn, NL}},
  title        = {{{A new approach to mayonnaise: a low fat vegan variant enriched with pumpkin seed press cake derived protein isolate}}},
  year         = {{2024}},
}

@misc{11994,
  author       = {{Gossen, Arthur and Katsch, Linda and Zimmer, Manuel and Bator, Martyna and Lohweg, Volker and Schneider, Jan}},
  location     = {{Köln}},
  title        = {{{FoodLifeTimeTracking: Use of multimodal information fusion for the realisation of a monitoring device and a life cycle simulator for the investigation and quantification of quality-determining parameters and the shelf life of food and its ingredients}}},
  year         = {{2024}},
}

@misc{11996,
  author       = {{Katsch, Linda and Trilling-Haasler, Marc and Pein-Hackelbusch, Miriam and Schneider, Jan}},
  location     = {{Köln}},
  title        = {{{PETauthent – Authentication of PET recyclate for food packaging using data-intensive sensors and machine learning methods}}},
  year         = {{2024}},
}

@misc{11997,
  abstract     = {{In Germany, individuals unable or not yet able to return to the general labor market due to disabilities are employed in sheltered workshops which are called WfbM (“Werkstätten für behinderte Menschen”). These organizations are required to earn the wages for the aforementioned group of people by offering market services. These services include, in particular, assembly activities. However, WfbM face the challenge that customer orders tend to become more complex, especially as a result of an increased number of product variants. This development not only has an impact on the work in WfbM, but also makes it much more difficult to achieve the desired inclusion of people with disabilities in the general labor market. Bearing this in mind, the research question addressed in this article can be stated as such: How far can the use of an informational assistance system compensate for performance deficits of people with disabilities in the context of assembly? The results of the conducted laboratory study show that the implementation of an assistance system can help to reduce existing barriers and challenges resulting from the mismatch between requirements of the general labor market and the performance characteristics of people with cognitive impairments.
Practical Relevance: For people with disabilities, the use of assistance systems opens up new opportunities for participation in the general labor market and thus makes an important contribution to implementing the requirements of the “Bundesteilhabegesetz” (a law to strengthen participation of people with disabilities in Germany).}},
  author       = {{Bendzioch, Sven and Hinrichsen, Sven}},
  booktitle    = {{Zeitschrift für Arbeitswissenschaft (ZfA)}},
  issn         = {{2366-4681}},
  keywords     = {{Informational Assistance System, People with Disabilities, Manual Assembly, Image Processing System, Laboratory Study}},
  number       = {{2}},
  pages        = {{240--253}},
  publisher    = {{Springer-Verlag GmbH }},
  title        = {{{Potentials of an informational assembly assistance system for persons with cognitive disabilities — Results of a laboratory study}}},
  doi          = {{10.1007/s41449-024-00414-9}},
  volume       = {{78}},
  year         = {{2024}},
}

@misc{12002,
  abstract     = {{Organisation und Moderation des Blocks B4 "Baurecht und Baubetrieb"}},
  author       = {{Noosten, Dirk}},
  booktitle    = {{17. Europäischer Kongress (EBH 2023) - Effizientes Bauen mit Holz im urbanen Raum}},
  location     = {{Köln}},
  title        = {{{Baurecht und Baubetrieb}}},
  year         = {{2024}},
}

@misc{12008,
  author       = {{Cepin, Simon and Borcherding, Holger}},
  booktitle    = {{PCIM Europe 2024; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management}},
  isbn         = {{978-3-8007-6262-0}},
  location     = {{Nürnberg}},
  pages        = {{PP010}},
  publisher    = {{VDE}},
  title        = {{{Integration of CFD Simulation Results in PLECS Using Lookup Tables}}},
  year         = {{2024}},
}

@misc{12009,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>Traditional work models often need more flexibility and time autonomy for employees, especially in manufacturing. Quantitative approaches and Artificial Intelligence (AI) applications offer the potential to improve work design. However, current research does not entirely focus on human-centric criteria that enable time autonomy. This paper addresses this gap by developing a set of criteria to evaluate intelligent personnel planning approaches based on their ability to enhance time autonomy for employees. Existing quantitative approaches are not sufficient to fully integrate the developed criteria.</jats:p><jats:p>Consequently, a novel model approach is proposed in an attempt to bridge the gap between current practices and the newly developed criteria. This two-stage planning approach fosters democratization of time autonomy on the shopfloor, moving beyond traditional top-down scheduling. The paper concludes by outlining the implementation process and discusses future developments with respect to AI for this model approach.</jats:p><jats:p><jats:italic>Practical Relevance</jats:italic>: In order to make working conditions on the shopfloor in high-wage countries more attractive, an alternative organization of shift work is needed. Intelligent planning approaches that combine traditional operations research methods with artificial intelligence approaches can democratize shift organization regarding time autonomy. Planning that takes both employee and employer preferences into account in a balanced way will strengthen the long-term competitiveness of manufacturing companies in high-wage countries and counteract the shortage of skilled labor.</jats:p>}},
  author       = {{Latos, Benedikt and Buckhorst, Armin and Kalantar, Peyman and Bentler, Dominik and Gabriel, Stefan and Dumitrescu, Roman and Minge, Michael and Steinmann, Barbara and Guhr, Nadine}},
  booktitle    = {{Zeitschrift für Arbeitswissenschaft}},
  issn         = {{2366-4681}},
  keywords     = {{Personnel Planning, Time Autonomy, Human-Centric Optimization, Artificial Intelligence, Manufacturing}},
  number       = {{3}},
  pages        = {{277--298}},
  publisher    = {{Springer-Verlag GmbH}},
  title        = {{{Time autonomy in personnel planning: Requirements and solution approaches in the context of intelligent scheduling from a holistic organizational perspective }}},
  doi          = {{10.1007/s41449-024-00432-7}},
  volume       = {{78}},
  year         = {{2024}},
}

@misc{12013,
  author       = {{Trilling-Haasler, Marc and Katsch, Linda and Fahmi, Amir and Pein-Hackelbusch, Miriam and Schneider, Jan}},
  location     = {{Lemgo}},
  title        = {{{Der rPET Gehalt in Flaschen - eine Frage des Glaubens? }}},
  year         = {{2024}},
}

@book{12014,
  abstract     = {{Holy Shit ist ein Testverfahren, bei dem du herausfinden wirst, ob du für die bevorstehenden ökologischen Herausforderungen bereit bist. Mit diesem Test wird sich deine Beziehung zu dem, was du konsumierst, dein Verständnis für das, was du bist und vor allem ‘was du von dir gibst’, grundlegend verändern. Du wirst erkennen, dass du ein elementarer Bestandteil eines Ökosystems bist.}},
  author       = {{Ziegler, Ella and Lehmann, Johannes and Felmeden, Jörg}},
  isbn         = {{979-8-9911251-1-6}},
  publisher    = {{Soil Factory Pres}},
  title        = {{{HOLY SHIT —  Are you ready for the ecological revolution?}}},
  year         = {{2024}},
}

@book{12017,
  abstract     = {{Holy Shit ist ein Testverfahren, bei dem du herausfinden wirst, ob du für die bevorstehenden ökologischen Herausforderungen bereit bist. Mit diesem Test wird sich deine Beziehung zu dem, was du konsumierst, dein Verständnis für das, was du bist und vor allem ‘was du von dir gibst’, grundlegend verändern. Du wirst erkennen, dass du ein elementarer Bestandteil eines Ökosystems bist.}},
  author       = {{Ziegler, Ella and Lehmann, Johannes and Felmeden, Jörg}},
  isbn         = {{978-3-910240-01-8}},
  pages        = {{27}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{HOLY SHIT — Bist Du bereit für die ökologische Revolution?}}},
  year         = {{2024}},
}

@misc{12019,
  author       = {{Schwarzer, Knut and Wilhelm, Patrick and Müller, Ulrich}},
  keywords     = {{Datenbanken, Text Mining, Entkeimung, KI, Pasteurisierung, D-Wert, LDzBase}},
  location     = {{Lemgo}},
  title        = {{{Text Mining als Werkzeug für die automatisierte Datensammlung in wissenschaftlichen Datenbanken am Beispiel der ‚Lemgo D- and z-value Database for Food‘}}},
  year         = {{2024}},
}

@misc{12020,
  author       = {{Schwarzer, Knut and Schneider, Jan and Müller, Ulrich}},
  keywords     = {{Getränke, Pasteurisation, Nachhaltigkeit, KZE, Tunnelpasteur, LDzBase}},
  location     = {{Lemgo}},
  title        = {{{Getränkepasteurisation neu gedacht – Sicherheit, Qualität, Nachhaltigkeit}}},
  year         = {{2024}},
}

@misc{12021,
  author       = {{Segermann, Jan and Luttmann, Mario and Blome, André and Feldt, Sebastian and Sivanesan, Sujee and Holst, Christoph-Alexander and Lohweg, Volker and Frahm, Björn and Müller, Ulrich}},
  keywords     = {{sourdough, fermentation, near-infrared spectroscopy, support vector machine}},
  location     = {{Lemgo}},
  title        = {{{Die Rolle von ML-Modellen in der Lebensmitteltechnologie: Eine Fallstudie zur Sauerteigfermentation mit NIR-Spektroskopie}}},
  year         = {{2024}},
}

@misc{12022,
  author       = {{Luttmann, Mario and Blome, André and Segermann, Jan and Jekle, Mario and Frahm, Björn and Müller, Ulrich}},
  keywords     = {{colorimetry, photogrammetry, wheat rolls, crust colour, 3D analysis}},
  location     = {{Lemgo}},
  title        = {{{Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen}}},
  year         = {{2024}},
}

@misc{12023,
  author       = {{Müller, Ulrich and Ibrahem, Riham and Al Krad, Majed and Schwarzer, Knut and Wilhelm, Patrick}},
  keywords     = {{steam sterilization, dried plants, wet plants, decontamination, active substances}},
  location     = {{Lemgo}},
  title        = {{{Das Lemgoer Mechanische Sattdampfverfahren für pflanzliche Materialien – Retrospektive und neue Erfahrungen}}},
  year         = {{2024}},
}

@misc{12024,
  author       = {{Ibrahem, Riham and Barakat, Bayan and Suliman, Mendana and Shekh Mousa, Ayman and Latta, Mohammed Ismael and Bekonda, Euphinette Amba and Schwarzer, Knut and Müller, Ulrich}},
  keywords     = {{essential oil, mint plants, stability of glandular, steam distillation, vacuum, temperature impact, oil glandular}},
  location     = {{Lemgo}},
  title        = {{{Vergleichende Untersuchungen der Festigkeiten von Ätherisch-Öl-Drüsenschuppen von Lippenblütlern – Sinn und Erkenntnisse}}},
  year         = {{2024}},
}

@misc{12025,
  author       = {{Liphardt, Daniel and Al Krad, Majed and Wilhelm, Patrick and Schwarzer, Knut and Müller, Ulrich}},
  keywords     = {{essential oil, scale up, steam distillation, oil losses}},
  location     = {{Lemgo}},
  title        = {{{Scale up-Probleme bei der schnellen Wasserdampfdestillation zur Gewinnung ätherischer Öle}}},
  year         = {{2024}},
}

@misc{12026,
  author       = {{Dehghanzadeh, Yasin and Liphardt, Daniel and Schwarzer, Knut and Wilhelm, Patrick and Müller, Ulrich}},
  keywords     = {{essential oil, scale up, steam distillation, yield, mint plants}},
  location     = {{Lemgo}},
  title        = {{{Prozessoptimierung der schnellen Wasserdampfdestillation zur Gewinnung ätherischer Öle}}},
  year         = {{2024}},
}

@misc{12028,
  abstract     = {{Since the early 2000s, forest owners in Central Europe have increasingly planted Nordmann fir (Abies nordmanniana (STEV.) SPACH) and Noble fir (Abies procera REHD.) for Christmas trees, intending to convert them into high forests. Climate-related damage, especially since 2018, has significantly reduced spruce populations, requirering a shift towards climate-adaptable tree species in future forests. Additionally, to reduce CO2 emissions from construction, there's a push for expanding timber construction, requiring non-spruce species for load-bearing products and applications. Although Nordmann and Noble fir are potential alternatives to spruce, they are not yet integrated into European standardization for load-bearing construction. Therefore, an assessment of German-origin Nordmann and Noble fir for use in glued laminated building products (GLT and CLT) is underway. Kiln-dried lamellas are graded visually and by machine using longitudinal vibration, with selected lamellas tested for tensile strength. Various mechanical properties are determined using non-destructive and destructive methods to establish input parameters for Finite Element Analysis (FEA). }},
  author       = {{Frühwald-König, Katja and Hackel, Martin and Kipp, Dennis and Lüke, Karin and Stracke, Felix Leonard and Burghaus, Noah and Wieland, Stefanie}},
  booktitle    = {{Proceedings of the 23rd International Nondestructive Testing and Evaluation of Wood Symposium}},
  keywords     = {{Nordmann fir, Noble fir, grading, elastomechanical properties, ultrasonic testing, vibration measurement}},
  location     = {{Campinas, Sao Paulo, Brasil}},
  pages        = {{192--204}},
  publisher    = {{United States Department of Agriculture (USDA)}},
  title        = {{{Nordmann and Noble fir Lamellas for Structural Purposes – Grading and Determination of Elastomechanical Properties by Non-Destructive and Destructive Testing}}},
  year         = {{2024}},
}

@misc{12029,
  abstract     = {{Following storm and calamity events in Europe since the early 2000s, many forest owners decided to establish Christmas tree plantations featuring Nordmann fir (Abies nordmanniana (STEV.) SPACH) and Noble fir (Abies procera REHD.), which are currently transformed into high forests. Climate-related forest damages and calamities result in significant depletion of spruce since 2018. Future forests should be characterized by a climate-adaptable variety of tree species. Nordmann and Noble fir represent possible alternatives to spurce, however from European origin they are not yet integrated into European standardization and therefore cannot be used for load bearing construction products. Consequently, an assessment of the potential of Nordmann and Noble fir of German origin for use in Glued Laminated Timber (GLT) is conducted. Selected tensile, compression, shear, and bending properties in various anatomical directions are determined on small, defect-free samples with destructive and non-destructive methods to establish input parameters for Finite Element Analysis (FEA).}},
  author       = {{Hackel, Martin and Frühwald-König, Katja and Burghaus, Noah and Stracke, Felix Leonard}},
  booktitle    = {{Proceedings of the 20th Annual Meeting of the Northern European Network for Wood Science and Engineering (WSE2024)}},
  location     = {{Edinburgh, Scotland}},
  publisher    = {{Edinburgh Napier University }},
  title        = {{{Nordmann and Noble fir -Determination of Elastomechanical Properties by Non-Destructive and Destructive Testing}}},
  year         = {{2024}},
}

@misc{12032,
  abstract     = {{As DC grids become more widespread in industry, the demand for DC industry-compliant power supplies is increasing. This paper describes the design and analysis of a SiC-based Active-Front-End with a switching frequency of 100 kHz and an output power of 50 kW. The focus of this Active-Front-End is on the small input inductance (uk=0,6%), which has been deliberately reduced in order to reduce package size. For a small inductance a high switching frequency and a fast and precise current measurement are basic requirements. The increase of the switching frequency reduces the size of the whole filter.}},
  author       = {{Otte, Raphael and Koch, Jan-Niklas and Borcherding, Holger and Stuckmann, Tim}},
  booktitle    = {{PCIM Europe : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 11-13 June 2024, Nuremberg}},
  isbn         = {{978-3-8007-6262-0}},
  keywords     = {{DC-Industry, DC-Grids, AIC, AFE, Active-Infeed-Converter, Active-Front-End}},
  location     = {{Nürnberg}},
  pages        = {{3402}},
  publisher    = {{VDE Verlag}},
  title        = {{{Design and Analysis of a 50kW SiC-based Active-Front-End with a very small line choke for DC-Grids}}},
  year         = {{2024}},
}

@misc{12036,
  author       = {{Jolk, Christian}},
  location     = {{Detmold}},
  title        = {{{Digitale GIS-basierte Landschafts- und Umweltmodelle in der Landschaftsarchitektur und der Umweltplanung. }}},
  year         = {{2024}},
}

@misc{12048,
  abstract     = {{Interactive stories can be an effective approach for teaching purposes. One shortcoming is the effort necessary to author and create these stories, especially complex storylines with choices for the readers. Based on recent advances in Natural Language Processing (NLP), new opportunities arise for assistance systems in the context of interactive stories. In our work, we present an authoring approach and prototypical tool for the creation of visual comic-strip like interactive stories, a type of hypercomics, that integrate an Artificial Intelligence (AI) assistance. Such comics are already used in our Gekonnt hanDeln web platform. The AI assistance provides suggestions for the overall story outline as well as how to design and write individual story frames. We provide a detailed description about the approach and its prototypical implementation. Furthermore, we present a study evaluating the prototype with student groups and how the prototype evolved in an iterative style based on the students’ feedback.}},
  author       = {{Grimm, Valentin and Rubart, Jessica}},
  booktitle    = {{HT '24: Proceedings of the 35th ACM Conference on Hypertext and Social Media}},
  isbn         = {{979-8-4007-0595-3 }},
  keywords     = {{Storytelling, Authoring, GPT, Hypercomics, Large Language Models}},
  location     = {{Poznan, Poland}},
  pages        = {{88--97}},
  publisher    = {{Association for Computing Machinery (ACM)}},
  title        = {{{Authoring Educational Hypercomics assisted by Large Language Models}}},
  doi          = {{10.1145/3648188.3675124}},
  year         = {{2024}},
}

@proceedings{12060,
  editor       = {{Noosten, Dirk}},
  isbn         = {{978-3-9816586-7-5}},
  issn         = {{2510-7321}},
  location     = {{Münster}},
  publisher    = {{Noosten}},
  title        = {{{Bewertung von Immobilien : 27. Symposium für Immobilienbewertung, Münster 2024 : Tagungsband }}},
  year         = {{2024}},
}

@misc{12072,
  author       = {{Neumann, Philipp}},
  booktitle    = {{OMT Magazin}},
  number       = {{21}},
  pages        = {{53--58}},
  publisher    = {{OMT}},
  title        = {{{Kompetenzen und Aufgaben von Online Marketing Manager:innen}}},
  year         = {{2024}},
}

@misc{12138,
  author       = {{Gossen, Arthur and Katsch, Linda and Schneider, Jan}},
  location     = {{Brügge}},
  title        = {{{Assessment of turbidity in beverage emulsions using computer vision}}},
  year         = {{2024}},
}

@misc{12147,
  abstract     = {{Aim:
Food loss and waste are significant challenges to the sustainability of food systems. This study aims to explore innovative approaches for reducing food waste and valorizing side-streams, focusing specifically on oat okara, a by-product of oat milk production. The aim is to extract and purify proteins from oat okara through enzymatic processes, with the ultimate goal of creating a sustainable protein source for various applications.
Method:
Oat okara was subjected to enzymatic treatment and hydrolysis using a pressure filter press. Enzymatic processes were optimized to achieve high protein yields with purity exceeding 80%. The hydrolysate was then concentrated using a rotary evaporator and purified through membrane filtration to remove impurities and smaller molecules.
Additionally, a chromatography system was employed to further purify the protein fractions and isolate individual peptides. This comprehensive approach ensures the extraction of high-quality proteins suitable for various applications.
Results:
The enzymatic extraction and purification process yielded proteins with high purity (>80%) from oat okara. The pressure filter press efficiently facilitated enzymatic hydrolysis, resulting in a hydrolysate rich in protein content. Subsequent concentration and purification steps effectively removed impurities, enhancing the quality of the protein extract.
Furthermore, chromatography enabled the isolation of individual peptides, further enhancing the value-added potential of the extracted proteins.
Conclusion:
This study demonstrates the feasibility of enzymatic extraction and purification of proteins from oat okara, a by-product of oat milk production. The extracted proteins hold promise as sustainable alternatives for various applications, including food and cosmetic industries. By valorizing side-streams and reducing food waste, this approach contributes to the development of more sustainable food systems.
}},
  author       = {{Probst, Daniel}},
  location     = {{Brügge}},
  title        = {{{Innovative Valorization of Oat By-Products}}},
  year         = {{2024}},
}

@misc{12149,
  author       = {{Struck, Susanne}},
  location     = {{Berlin}},
  title        = {{{Ackerbohnen in glutenfreien Backwaren - Chancen und Herausforderungen}}},
  year         = {{2024}},
}

@misc{12153,
  abstract     = {{In general gender differences have frequently been studied in experimental economics, but the findings remain inconclusive. In this study, we focus on gender differences in expectations and gender specific stereotypic mindsets in a dictator game, building on Blanckenburg, Tebbe, & Iseke (2023). We add to prior work by differentiating between stereotypical behavior and stereotypical expectations. Accordingly, we extended the classic dictator game by three steps in order to study whether recipients develop stereotypical beliefs regarding the dictator’s gender based on the amount of money the dictator has allocated to them. First, we asked recipients to estimate the amount. We then revealed the amount the dictator actually allocated to the recipient and finally, we asked the recipient to assess the dictator’s gender. In contrast to and building on previous results which show no gender differences regarding the amount the dictators allocate, we find evidence for stereotypical expectations of the recipients based on the amount the dictator allocates to them.}},
  author       = {{Austermann, Christine and von Blanckenburg, Korbinian and Iseke, Anja and Tebbe, Eva}},
  booktitle    = {{Journal of Economic Psychology}},
  issn         = {{0167-4870}},
  keywords     = {{Gender differences, Stereotypes, Dictator game, Economic behavior and expectations}},
  publisher    = {{Elsevier}},
  title        = {{{Stereotypical behavior vs. expectations: Gender differences in a dictator game}}},
  doi          = {{10.1016/j.joep.2024.102742}},
  volume       = {{103}},
  year         = {{2024}},
}

@inbook{12155,
  author       = {{Neumann, Philipp and Faupel, Christian}},
  booktitle    = {{Produktion, Logistik und Controlling im Zeitalter der Digitalisierung}},
  editor       = {{Betz, Stefan}},
  isbn         = {{978-3-339-13906-1}},
  pages        = {{63--94}},
  publisher    = {{Verlag Dr. Kovač }},
  title        = {{{Digitale Instrumente des Cost Engineering}}},
  volume       = {{580}},
  year         = {{2024}},
}

@book{12156,
  abstract     = {{Üben führt zum Lernerfolg
Dieses Übungsbuch stellt eine Aufgabensammlung mit Lösungen für das Lehrbuch „Mathematik in der BWL: Anwendungsorientiert und verständlich“ dar. Es enthält diverse Aufgaben inklusive
Lösungen zu den Themen:

    Folgen und Reihen,
    Funktionen,
    Differentialrechnung,
    Integralrechnung,
    Lineare Gleichungssysteme und lineare Programmierung. 

Obwohl zu Beginn eines jeden Kapitels noch einmal Formeln aufgelistet werden, die hilfreich für die Bearbeitung der Aufgaben sind, wird in diesem Übungsbuch auf umfangreiche Erklärungen und Erläuterungen verzichtet. Vielmehr wird dem Wunsch der Studierenden nach möglichst vielen Übungsaufgaben zu den relevanten Themen nachgekommen.
Die Aufgaben in diesem Übungsbuch sind in unterschiedliche Niveaus eingeteilt: Aufgabenniveau 1 (einfach), Aufgabenniveau 2 (mittel), Aufgabenniveau 3 (schwer). Entsprechend der prognostizierten Bearbeitungszeit sind zudem bei allen Aufgaben die jeweils erreichbaren Punkte hinterlegt (1 Punkt = 1 Minute Bearbeitungszeit). Damit wird dem Anwender nicht nur eine umfangreiche Aufgabensammlung zur Verfügung gestellt, sondern gleichzeitig eine Orientierung geboten, wie hoch das Anforderungsniveau der Wirtschaftsmathematik in einem Bachelorstudium der BWL ist und welche dafür vorgesehenen Bearbeitungszeit diesem Niveau entspricht, beispielsweise im Hinblick auf eine Klausur. }},
  author       = {{von Blanckenburg, Korbinian and Austermann, Christine}},
  isbn         = {{978-3-8006-7443-5 }},
  pages        = {{77}},
  publisher    = {{Vahlen }},
  title        = {{{Übungsbuch Mathematik in der BWL}}},
  volume       = {{2. Auflage}},
  year         = {{2024}},
}

@misc{12159,
  author       = {{Laux, Maximilian}},
  pages        = {{494}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Geschichte und Zukunft des Filmgenres Horror in der Bundesrepublik Deutschland}}},
  year         = {{2024}},
}

@book{12162,
  author       = {{Müller , Gerd and Kirsch, Dennis and Minge, Michael and Thüring, Manfred and Meincke, Marie and Kühn, Matthias}},
  isbn         = {{978-3-948917-26-5 }},
  pages        = {{176}},
  publisher    = {{Gesamtverband der Deutschen Versicherungswirtschaft e.V. }},
  title        = {{{Verkehrssicherheit von Kindertransport auf dem Fahrrad}}},
  volume       = {{95}},
  year         = {{2024}},
}

@misc{12167,
  abstract     = {{Deployment of Level 3 and Level 4 autonomous vehicles (AVs) in urban environments is significantly constrained by adverse weather conditions, limiting their operation to clear weather due to safety concerns. Ensuring that AVs remain within their designated Operational Design Domain (ODD) is a formidable challenge, making boundary monitoring strategies essential for safe navigation. This study explores the critical role of an ODD monitoring system (OMS) in addressing these challenges. It reviews various methodologies for designing an OMS and presents a comprehensive visualization framework incorporating trigger points for ODD exits. These trigger points serve as essential references for effective OMS design. The study also delves into a specific use case concerning ODD exits: the reduction in road friction due to adverse weather conditions. It emphasizes the importance of contactless computer vision-based methods for road condition estimation (RCE), particularly using vision sensors such as cameras. The study details a timeline of methods involving classical machine learning and deep learning feature extraction techniques, identifying contemporary challenges such as class imbalance, lack of comprehensive datasets, annotation methods, and the scarcity of generalization techniques. Furthermore, it provides a factual comparison of two state-of-the-art RCE datasets. In essence, the study aims to address and explore ODD exits due to weather-induced road conditions, decoding the practical solutions and directions for future research in the realm of AVs.}},
  author       = {{Subramanian, Ramakrishnan and Büker, Ulrich}},
  booktitle    = {{Eng : advances in engineering}},
  issn         = {{2673-4117}},
  keywords     = {{autonomous vehicles, operational design domain, computer vision, machine learning, road surface detection}},
  number       = {{4}},
  pages        = {{2778--2804}},
  publisher    = {{MDPI AG}},
  title        = {{{Study of Contactless Computer Vision-Based Road Condition Estimation Methods Within the Framework of an Operational Design Domain Monitoring System}}},
  doi          = {{10.3390/eng5040145}},
  volume       = {{5}},
  year         = {{2024}},
}

@misc{12207,
  abstract     = {{Lakes represent a vital source of freshwater, accounting for 87% of the Earth’s accessible surface freshwater resources and providing a range of ecosystem services, including water for human consumption. As climate change continues to unfold, understanding the potential evaporative water losses from lakes becomes crucial for effective water management strategies. Here we investigate the impacts of climate change on the evaporation rates of 23 European lakes and reservoirs of varying size during the warm season (July–September). To assess the evaporation trends, we employ a 12-member ensemble of model projections, utilizing three one-dimensional process-based lake models. These lake models were driven by bias-corrected climate simulations from four General Circulation Models (GCMs), considering both a historical (1970–2005) and future (2006–2099) period. Our findings reveal a consistent projection of increased warm-season evaporation across all lakes this century, though the magnitude varies depending on specific factors. By the end of this century (2070–2099), we estimate a 21%, 30% and 42% average increase in evaporation rates in the studied European lakes under RCP (Representative Concentration Pathway) 2.6, 6.0 and 8.5, respectively. Moreover, future projections of the relationship between precipitation (P) and evaporation (E) in the studied lakes, suggest that P-E will decrease this century, likely leading to a deficit in the availability of surface water. The projected increases in evaporation rates underscore the significance of adapting strategic management approaches for European lakes to cope with the far-reaching consequences of climate change.}},
  author       = {{La Fuente, Sofia and Jennings, Eleanor and Lenters, John D. and Verburg, Piet and Kirillin, Georgiy and Shatwell, Tom and Couture, Raoul-Marie and Côté, Marianne and Vinnå, C. Love Råman and Woolway, R. Iestyn}},
  booktitle    = {{Climatic Change}},
  issn         = {{1573-1480}},
  keywords     = {{Multi-model, Water availability, Europe, Ensemble, Lake evaporation, Latent heat flux}},
  number       = {{12}},
  publisher    = {{Springer}},
  title        = {{{Increasing warm-season evaporation rates across European lakes under climate change}}},
  doi          = {{10.1007/s10584-024-03830-2}},
  volume       = {{177}},
  year         = {{2024}},
}

@misc{12209,
  abstract     = {{Net ecosystem production (NEP) is an important indicator of lake ecosystem function and integrity. An earlier study, restricted to one geographical region, indicated that oxygen saturation levels (DO%) might be used to predict daily NEP in shallow lakes. To test the generality of the method, we used DO% data collected in a standardised pan-European mesocosm experiment with contrasting trophic states and water levels covering a large climate gradient (from Sweden to Turkey). We corroborated these data with process-based DO simulations. The NEP ~ DO% relation depended on factors influencing gas transfer: water depth and wind. The NEP ~ DO% relation per volume became weaker with increasing depth (1–2 m) but was independent of depth when area based. Simulations indicated that the marginalisation of the depth was sensitive to wind conditions. Trophic status, temperature and light showed no or only marginal (climate zone) effects (experimental data), while the simulations indicated influence of those factors under particular wind–depth conditions. We confirmed that when considering also wind and depth effects, midday DO% potentially provides reliable estimates of daily NEP. Therefore, historical monitoring data of DO% might be used to estimate NEP, and process-based oxygen models may be valuable tool therein. We encourage further tests.}},
  author       = {{Cao, Yu and Scharfenberger, Ulrike and Shatwell, Tom and Adrian, Rita and Agasild, Helen and Angeler, David G. and Beklioğlu, Meryem and Çakıroğlu, Ayşe ldil and Hejzlar, Josef and Papastergiadou, Eva and Šorf, Michal and Stefanidis, Kostas and Søndergaard, Martin and Zingel, Priit and Jeppesen, Erik}},
  booktitle    = {{Hydrobiologia : acta hydrobiologica, hydrographica, limnologica et protistologica }},
  issn         = {{1573-5117}},
  keywords     = {{Metabolism, Simple models, Process-based models, Cross-system analyses}},
  number       = {{2}},
  pages        = {{471--487}},
  publisher    = {{Springer}},
  title        = {{{Predicting daily net ecosystem production in shallow lakes from dissolved oxygen saturation levels: a pan-European mesocosm experiment and modelling approach}}},
  doi          = {{10.1007/s10750-024-05714-z}},
  volume       = {{852}},
  year         = {{2024}},
}

@misc{12211,
  abstract     = {{Aquatic ecosystems are threatened by eutrophication from nutrient pollution. In lakes, eutrophication causes a plethora of deleterious effects, such as harmful algal blooms, fish kills and increased methane emissions. However, lake-specific responses to nutrient changes are highly variable, complicating eutrophication management. These lake-specific responses could result from short-term stochastic drivers overshadowing lake-independent, long-term relationships between phytoplankton and nutrients. Here, we show that strong stoichiometric long-term relationships exist between nutrients and chlorophyll a (Chla) for 5-year simple moving averages (SMA, median R² = 0.87) along a gradient of total nitrogen to total phosphorus (TN:TP) ratios. These stoichiometric relationships are consistent across 159 shallow lakes (defined as average depth < 6 m) from a cross-continental, open-access database. We calculate 5-year SMA residuals to assess short-term variability and find substantial short-term Chla variation which is weakly related to nutrient concentrations (median R² = 0.12). With shallow lakes representing 89% of the world’s lakes, the identified stoichiometric long-term relationships can globally improve quantitative nutrient management in both lakes and their catchments through a nutrient-ratio-based strategy.}},
  author       = {{Graeber, Daniel and McCarthy, Mark J. and Shatwell, Tom and Borchardt, Dietrich and Jeppesen, Erik and Søndergaard, Martin and Lauridsen, Torben L. and Davidson, Thomas A.}},
  booktitle    = {{Nature Communications}},
  issn         = {{2041-1723}},
  number       = {{1}},
  publisher    = {{Springer Nature}},
  title        = {{{Consistent stoichiometric long-term relationships between nutrients and chlorophyll-a across shallow lakes}}},
  doi          = {{10.1038/s41467-024-45115-3}},
  volume       = {{15}},
  year         = {{2024}},
}

@misc{12212,
  abstract     = {{Water quality and hypoxia in lakes and reservoirs are strongly associated with water renewal. Yet vertical water exchange is still not fully understood and challenging to evaluate in highly dynamic systems. Here, we applied a scaling approach using the vertical timescale, vertical water age (VWA), defined as time since a water parcel last touched the water surface. We established a 3D hydrodynamic-based age model to quantify the vertical water renewal in Xiangxi Bay, a tributary bay of the Three Gorges Dam. The integrated effects of hydrodynamic processes like stratification, intruding density currents from the mainstream, and upstream inflow on the vertical renewal were accounted for. Results indicated that the spatial–temporal distribution of VWA in Xiangxi Bay depended on stratification and forms of intruding density currents. Age was large in spring and summer, and small in autumn and winter, reaching a maximum of 25 days in April. The vertical water renewal was faster during bottom intrusions from the mainstream than during middle and surface intrusions. At times, the epilimnion contained old water due to circulations, and the hypolimnion contained young water due to upstream flushing. In contrast to natural lakes, the bottom water was often younger than overlying intermediate waters. This demonstrated that mixed layer depth was insufficient to fully capture the vertical exchange in riverine systems with significant surface/bottom intrusion. The findings suggested VWA as a quantitative measure of vertical water transport in highly dynamic systems and its usability for environmental water management.}},
  author       = {{Gai, Bo and Boehrer, Bertram and Sun, Jian and Li, Yuanyi and Lin, Binliang and Shatwell, Tom}},
  booktitle    = {{Journal of Hydrology}},
  issn         = {{1879-2707}},
  keywords     = {{Vertical water renewal, Water age, Thermal stratification, Hypoxia, 3D hydrodynamic-based age model, Water environmental management}},
  number       = {{3}},
  publisher    = {{Elsevier BV}},
  title        = {{{Vertical water age and water renewal in a large riverine reservoir}}},
  doi          = {{10.1016/j.jhydrol.2024.130701}},
  volume       = {{631}},
  year         = {{2024}},
}

@misc{12213,
  abstract     = {{Within freshwater networks, lakes and reservoirs are reactors that modify nutrient dynamics. Their functioning is based on an interplay of hydrological and biogeochemical processes, rendering them vulnerable to climate change. Future changes in catchment characteristics are likely to alter the timing and magnitude of nutrient concentrations in discharge. This study investigated the impact of changing variability of nutrient concentrations on lake and reservoir dynamics. We examined intraannual nutrient retention and analyzed the role of reservoirs in reconfiguring the variability of nutrients. Utilizing the 1D lake model GOTM-WET, we simulated nutrient processing in a mesotrophic reservoir. Further, we performed scenario simulations by modifying the variability of inflow nitrogen and phosphorus concentrations. Our findings indicate that the reservoir removed ∼4% and ∼12% of total nitrogen (TN) and total phosphorus (TP), respectively. Particulate fractions were retained efficiently, but there was a net export of dissolved organic fractions. Regarding mixing and stratification periods, however, we observed net nitrogen export during stratification in certain years. During stratification, outflow concentration variability remained relatively unchanged for TN and TP compared to inflow concentrations. Conversely, phosphate and nitrate concentration variability increased in the outflow because of in-lake assimilation and the influence of hydrological events. With increasing inflow concentration variability during stratification, there was decreased removal of TN and TP by the reservoir, but increased variability of concentration. By evaluating the lake's capacity to attenuate variability of nutrient inflows under altered conditions, there are opportunities to improve monitoring of nutrient export and evaluate the potential impact of nutrient peaks on downstream drinking water resources and ecosystems.}},
  author       = {{Determann, Maria and Musolff, Andreas and Frassl, Marieke A. and Rinke, Karsten and Shatwell, Tom}},
  booktitle    = {{Inland waters : journal of the International Society of Limnology}},
  issn         = {{2044-205X}},
  keywords     = {{catchment–lake interaction, concentration variability, GOTM-WET, lake nutrient export, reservoir biogeochemistry}},
  number       = {{4}},
  pages        = {{560--575}},
  publisher    = {{Freshwater Biological Association}},
  title        = {{{Nutrient retention in a small reservoir under changed variability of inflow nutrient concentration}}},
  doi          = {{10.1080/20442041.2024.2305105}},
  volume       = {{13}},
  year         = {{2024}},
}

@misc{12215,
  abstract     = {{Water-level reduction frequently occurs in deep reservoirs, but its effect on dissolved oxygen concentration is not well understood. In this study we used a well-established water quality model to illustrate effects of water level dynamics on oxygen concentration in Rappbode Reservoir, Germany. We then systematically elucidated the potential of selective withdrawal to control hypoxia under changing water levels. Our results documented a gradual decrease of hypolimnetic oxygen concentration under decreasing water level, and hypoxia occurred when the initial level was lower than 410 m a.s.l (71 m relative to the reservoir bottom). We also suggested that changes of hypoxic region, under increasing hypolimnetic withdrawal discharge, followed a unimodal trajectory with the maximum hypoxic area projected under the discharge between 3 m3/sec and 4 m3/sec. Besides, our results illustrated the extent of hypoxia was most effectively inhibited if the withdrawal strategy was applied at the end of stratification with the outlet elevation at the deepest part of the reservoir. Moreover, hypoxia can be totally avoided under a hybrid elevation withdrawal strategy using surface withdrawal during early and mid stratification, and deep withdrawal at the end of stratification. We further confirmed the decisive role of thermal structure in the formation of hypoxia under water-level reduction and withdrawal strategies. We believe the conclusions from this study can be applied to many deep waters in the temperate zone, and the results should guide stakeholders to mitigate negative impacts of hypoxia on aquatic ecosystems.}},
  author       = {{Mi, Chenxi and Rinke, Karsten and Shatwell, Tom}},
  booktitle    = {{Journal of Environmental Sciences}},
  issn         = {{1878-7320}},
  keywords     = {{Hypoxia, Water-level reduction, Hypolimnetic water withdrawal, Stratification phenology, Water quality simulation, Sediment oxygen demand}},
  number       = {{12}},
  pages        = {{127--139}},
  publisher    = {{Elsevier BV}},
  title        = {{{Optimizing selective withdrawal strategies to mitigate hypoxia under water-level reduction in Germany's largest drinking water reservoir}}},
  doi          = {{10.1016/j.jes.2023.06.025}},
  volume       = {{146}},
  year         = {{2024}},
}

@misc{12254,
  abstract     = {{Depending on the oil production technology, at least 60% of the oilseeds input such as sunflower, pumpkin or canola remain as by-product, which is usually denoted as press cake (PC) and contains a significant amount of fiber and protein. Its further valorization in food requires knowledge on the technofunctional properties of the press cake and on possibilities for improving its value. Aim of the current study was to evaluate the effect of two separation techniques, namely targeted sieving and air classification, on composition, and physical as well as technofunctional properties of fractions of sunflower press cake previously milled to <1.0 mm or <2.0 mm. It is evident for both separation techniques that fines fractions obtained by using smaller sieves or lower air volume flow showed an increased protein content, with a protein enrichment factor of up to 1.47. Using PC < 2.0 mm as raw material, protein separation efficiency, a combined measure for protein content and yield, was higher after separation by air classification. Whereas protein solubility was not affected by the particle size distribution of the separated fractions, emulsion activity and emulsion stability were improved especially for the small particle fractions separated from PC < 2.0 mm.}},
  author       = {{Caraballo, Sophie Morejón and Trültzsch, Stephanie and Struck, Susanne and Rohm, Harald}},
  booktitle    = {{  LWT - food science and technology : an official journal of the Swiss Society of Food Science and Technology (SGLWT/SOSSTA) and the International Union of Food Science and Technology (IUFoST)}},
  issn         = {{1096-1127}},
  keywords     = {{Sieving, Air classification, Particle size, Water binding, Foaming, Emulsification}},
  publisher    = {{Elsevier BV}},
  title        = {{{Dry fractionation of sunflower press cake as tool to improve its technofunctional properties}}},
  doi          = {{10.1016/j.lwt.2024.117148}},
  volume       = {{214}},
  year         = {{2024}},
}

@misc{12256,
  author       = {{Ruhoff, Jana}},
  pages        = {{128}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Spendenmotivation durch emotionale Anreize - Konzept und Gestaltung einer Vereinsapp}}},
  year         = {{2024}},
}

@misc{12263,
  author       = {{Lau, Evelin}},
  keywords     = {{Creature Design, Shape Language, Color Theory}},
  pages        = {{82}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Das Zusammenspiel von Form und Farbe im Creature Design von stilisierten Games}}},
  year         = {{2024}},
}

@misc{12272,
  abstract     = {{Leucorrhinia pectoralis and Coenagrion hastulatum (Odonata) in the low mountain ranges of Lower Saxony, Germany – two species with syntopic occurrences but oppos-ing trends? – Coenagrion hastulatum and Leucorrhinia pectoralis both mainly inhabit mesotrophic-dystrophic waters with riparian reed vegetation in Lower Saxony, but show opposing population trends throughout the state. For both species, the current database of the NGO Working Group of Dragonflies in Lower Saxony and Bremen was used to ana-lyse whether population changes can be observed in the highest low mountain ranges of the state – the Harz and the Solling region. The calculated trends especially for the Solling are influenced by a lack of consistency in survey activities in the different periods considered and are therefore not very robust. In the Harz, a moderate decline in C. has-tulatum has been recorded, which presumably results from the silting up and overgrowth of some small water bodies formerly colonised by the species. This in turn is the result of increasing summer drought in recent years and thus climate change. A similar situation can be assumed for the Solling, where water bodies formerly used for reproduction by C. hastula tum have repeatedly dried up in recent years. A decline in the species solely due to the rise in temperature, as is assumed for the lowlands of Lower Saxony, cannot be detected in either the montane Harz or the submontane Solling. For L. pectoralis, which is regarded as a climate change winner in Central and Northern Europe, different popu-lation trends are calculated in the two regions. No increase is recognisable in the Harz; observations are still primarily limited to single individuals. In contrast, the species ap-pears to be increasing in the Solling, although what was previously its “best” water body with reproduction has failed in recent years due to drying out. However, the calculated very strong positive trend is methodologically overestimated, as Odonata inventories in the Solling have been largely limited to targeted surveys of this Habitats Directive spe-cies over the past ten years. The species is certainly much more common in the Solling, situated in lower altitudes, than in the Harz, although the Harz has various water bodies with structures suitable for the species. At least for the Harz, the question of an opposing trend development of C. hastula tum and L. pectoralis must be ruled out according to the current state of knowledge. In the submontane zone of the Solling, on the other hand, the trend analysis indicates an increase in L. pectoralis and a shift in abundance between the two species in favour of L. pectoralis. The importance of the Harz and Solling as refugia for C. hastulatum, which is now classified as threatened with extinction in the lowlands of Lower Saxony, should be emphasised. Due to gaps in the data, studies are necessary for both species in the Solling, especially in areas where no surveys have been carried out for more than ten years. Finally, some recommendation are given on how to promote both species in the Harz and Solling.}},
  author       = {{Baumann, Kathrin and Lohr, Mathias}},
  booktitle    = {{Libellula Supplement 17 - Festschrift zum 75. Geburtstag von Reinhard Jödicke}},
  issn         = {{0723-6514}},
  pages        = {{87--107}},
  publisher    = {{GdO }},
  title        = {{{Leucorrhinia pectoralis und Coenagrion hastulatum (Odonata) in niedersächsischen Mittelgebirgen - zwei Arten mit syntopen Vorkommen, aber gegenläufiger Entwicklung?}}},
  volume       = {{17}},
  year         = {{2024}},
}

@misc{12274,
  abstract     = {{The Toothed Orchid,  Neotinea  tridentata, has been elected for Orchid of the Year 2019 by the steering committees of the German Native  Orchids  Associations  (Arbeitskreise Heimische Orchideen Deutschlands, AHO) Etymology, characteristics and life cycle as well as ecology and habitat of the species are specified. The range of the species is described and a distribution map is presented for Germany. Threats are discussed and methods of conservation management of the species are pointed out. Finally possible consequences of climate change for the species are discussed}},
  author       = {{Lohr, Mathias and Haas, Jutta}},
  booktitle    = {{L’Orchidophile}},
  issn         = {{2498-3713}},
  keywords     = {{Orchidaceae, Neotinea tridentata, orchidée  de l’année 2019, caractéristiques, distribution, cycle de vie, gestion, menaces, conservation, statut de protection}},
  pages        = {{139--148}},
  publisher    = {{FFO}},
  title        = {{{L’orchidée tridentée, Neotinea tridentata. }}},
  volume       = {{241}},
  year         = {{2024}},
}

@book{12276,
  author       = {{De Knijf, G. and Billqvist, M. and Van Grunsven, R. and Allen, D.  and Assandri, G. and Bellotto, V. and Bruslund, S. and Bedjanic, M. and Conze, K.-J. and Diaz Martinez, C. and Lohr, Mathias and  al., et.}},
  pages        = {{44}},
  title        = {{{European Dragonflies: Moving from assessment to conservation planning. Apendix to the Status Assessment of European Dragonflies (Odonata).}}},
  year         = {{2024}},
}

@misc{12281,
  abstract     = {{Although employee matters and human rights matters directly affect the corporate environment, research in this area remains nascent. To obtain evidence on the extent of corporate compliance with due diligence obligations, sustainability reporting has been analyzed. Grounded in institutional theory, this study examines the effects of regulation, the degree of professionalization, and sector-specific variations. The research employs a qualitative-interpretative content analysis, focusing on the reporting behaviour of 12 listed companies in Germany from both high-risk and low-risk sectors. The reporting periods selected are 2017 and 2021, chosen to examine the impact of regulations under the Non-Financial Reporting Directive 2014/95/EU (NFRD) and the Second Shareholder Rights Directive. The results show that regulation influences the disclosure of employee matters and human rights matters. Furthermore, there is a difference in the level of specificity regarding these matters, as well as in terms of opportunities and risks. The intensity of regulation also has an impact on the comparability and quality of reporting. By analyzing the reporting behaviour concerning two central social matters, this study compares the disclosure of employee matters and human rights matters, thereby contributing to the broader understanding of corporate social responsibility as well as gaining knowledge regarding sustainable corporate governance processes fostering the transformation towards sustainability-related actions across different sectors. In addition, the study examines both existing (NFRD) and forthcoming Corporate Sustainability Reporting Directive (CSRD) EU reporting obligations within a unified research framework, thus contributing to the advancement of sustainability reporting from an institutional theoretical perspective.}},
  author       = {{Reustlen, Stefanie and Stawinoga, Martin}},
  booktitle    = {{Sustainability Nexus Forum}},
  issn         = {{2948-1619}},
  number       = {{1}},
  publisher    = {{Springer }},
  title        = {{{Do internationally operating companies act in a socially sustainable manner? An empirical comparison of disclosure regarding employee matters and human rights matters}}},
  doi          = {{https://doi.org/10.1007/s00550-024-00556-8}},
  volume       = {{32}},
  year         = {{2024}},
}

@misc{12283,
  author       = {{Wittland, Sebastian and Kanzler, Clemens and Rohn, Sascha and Sciurba, Elisabeth and Sokolowsky, Martina and Matthäus, Bertrand}},
  booktitle    = {{Lebensmittelchemie : Zeitschrift der Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker }},
  issn         = {{1521-3811}},
  location     = {{Freising}},
  number       = {{S3}},
  pages        = {{S3--111--S3--111}},
  publisher    = {{Wiley}},
  title        = {{{Charakterisierung des Einflusses von Allulose in Kombination mit verschiedenen Getreidesorten und Mehltypen auf die Frischhaltung bei Hefebackwaren}}},
  doi          = {{10.1002/lemi.202459094}},
  volume       = {{78}},
  year         = {{2024}},
}

@misc{12284,
  abstract     = {{Due to the increasingly widespread use of efficient power electronics, DC grids offer more and more advantages over AC grids. In the field of energy supply the use of DC technology is also growing and is state of the art in offshore, high-voltage, vehicle and data center applications. The spread of industrial open DC grids is currently starting and is completely different due to the requirements and the specifics of certain industrial applications such as conductor systems, e.g. monorail conveyer or rack feeder systems. This paper investigates multi feed in operation in industrial DC conductor systems, especially for transitions between loaded and load free conductor segments. For this purpose, a test bench consisting of two conductor segments is developed. Each segment is individually fed by an infeed converter. The transitions between segments will be analyzed regarding control behavior and stability.}},
  author       = {{Koch, Jan-Niklas and Otte, Raphael and Stuckmann, Tim and Warkentin, Slavi and Borcherding, Holger}},
  booktitle    = {{PCIM Europe 2024 International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management}},
  isbn         = {{ 978-3-8007-6262-0}},
  location     = {{Nürnberg}},
  pages        = {{PP194}},
  publisher    = {{VDE Verlag}},
  title        = {{{Investigation of Load Transitions Between Loaded and Load Free Conductor Segments in Industrial Conductor Systems}}},
  doi          = {{10.30420/566262317}},
  year         = {{2024}},
}

@proceedings{10734,
  editor       = {{Jasperneite, Jürgen and Jumar, Ulrich}},
  isbn         = {{978-3-9818463-5-5}},
  location     = {{Lemgo}},
  publisher    = {{Institut für industrielle Informationstechnik - inIT der Technischen Hochschule Ostwestfalen-Lippe}},
  title        = {{{Kommunikation in der Automation : Beiträge des Jahreskolloquiums KommA 2024}}},
  doi          = {{10.25644/jnac-vp34}},
  volume       = {{15}},
  year         = {{2024}},
}

@misc{10957,
  author       = {{Reinhardt, Lena and Gassenmeier, Veronika and Feldt, Sebastian and Plate, Sebastian and Tremmel, Martin and Frahm, Björn and Stosch, Martin}},
  location     = {{Recklinghausen}},
  title        = {{{Mycelium-based materials from residues of the regional wood industry}}},
  year         = {{2024}},
}

@misc{10985,
  abstract     = {{This thesis examines the impacts of scene and rendering optimizations techniques aimed for GPU rendering within the realm of animated scene for offline rendering. Focusing on the unique challenges posed by dynamic animations, the research explores how these rendering approaches impact rendering speed, memory efficiency, and the attainment of lifelike visual quality. Using Octane render as ground for analysis, this study aims to uncover how scene optimizations intersect with the demands of animated content. Through meticulous comparison, this thesis endeavours to provide insights that empower rendering practitioners and animators to go through optimization strategies, bridging the gap between efficient resource allocation and the pursuit of captivating visual.}},
  author       = {{De Melo Bernardino, Lucas}},
  keywords     = {{GPU Rendering, Scene Optimization, 3D Rendering, Cinema 4D, Octane Render}},
  pages        = {{55}},
  publisher    = {{Technischen Hochschule Ostwestfahlen-Lippe}},
  title        = {{{Enhancing GPU Rendering Efficiency through Scene Optimizations: A Case Study using Octane for Cinema 4D}}},
  year         = {{2024}},
}

@misc{10992,
  author       = {{Diekmann, Nina}},
  pages        = {{41}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{Zwischen Worten und Bildern : Die Entstehung eines illustrierten Kinderbuches mit Zeichenanleitung}}},
  year         = {{2024}},
}

@misc{10996,
  author       = {{Tholen, Janna and Zimmermann, Moritz and Schulze Althoff, Gereon and Upmann, Matthias}},
  location     = {{Berlin}},
  title        = {{{Dekontamination von Schweineschlachtkörpern mittels Vakuum-Dampf-Behandlung}}},
  year         = {{2024}},
}

@misc{10997,
  author       = {{Tholen, Janna and Schulze Althoff, Gereon and Upmann, Matthias}},
  location     = {{Leipzig}},
  title        = {{{Künstliche Intelligenz in der Fleischhygiene - Entwicklung eines Detektionssystems für Kontaminationen mit Kamerasystemen}}},
  year         = {{2024}},
}

@misc{11000,
  abstract     = {{Die Bachelorarbeit widmet sich eingehend der Erforschung der vielfältigen Möglichkeiten einer Zuschauerperspektive in VR-Anwendungen. Das Hauptziel bestand darin, die Realisierbarkeit und Funktionalität einer solchen Perspektive zu untersuchen. Dabei wurden verschiedene Arten von Zuschauerperspektiven analysiert, ihre spezifischen Funktionen detailliert betrachtet und unterschiedliche Umsetzungsmöglichkeiten erforscht. Die Rolle des VR-Zuschauers wurde definiert, und umfassende Empfehlungen für die Implementierung von Hardware- und Software-Anforderungen sowie zur Bewältigung von Herausforderungen wurden erarbeitet.

Die Arbeit präsentierte zudem bereits umgesetzte VR-Anwendungen in der Unterhaltungsbranche und beruflichen Kontexten, in denen die Zuschauerperspektive eine bedeutende Rolle spielt. Ein besonderer Fokus lag auf der Vorstellung eines Konzepts zur Umsetzung von VR-Zuschauerperspektiven im KreativInstitut Ostwestfalen-Lippe.}},
  author       = {{Schneider, Marc}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Zuschauerperspektive in VR-Applikationen}}},
  year         = {{2024}},
}

@misc{11004,
  author       = {{Osbahr, Laura}},
  publisher    = {{Technische Hochschule OWL-Lippe}},
  title        = {{{Darstellungsexperiment - Wie Gestaltungstechniken das Erscheinungsbild verändern, am Beispiel der Zitrone.}}},
  year         = {{2024}},
}

@misc{11008,
  author       = {{Wüllner, Loreen}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Konzeption und Gestaltung einer Mitarbeiter-App}}},
  year         = {{2024}},
}

@misc{11081,
  author       = {{Schröder, Niko}},
  pages        = {{65}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Filmreife Effektsimulationen in Echtzeit? Ein Vergleich zwischen Houdini und VectorayGen}}},
  year         = {{2024}},
}

@misc{11085,
  author       = {{Düning, Sören}},
  pages        = {{85}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Dezentrale Energiespeicherung - Konzeption und Realisierung eines Videospots}}},
  year         = {{2024}},
}

@misc{11088,
  author       = {{Walker, Leon}},
  pages        = {{74}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Examination of the Role of Gender in Video Game Media: An analysis of how Gender Roles are portrayed in Video Game Media, and how they have evolved over time.}}},
  year         = {{2024}},
}

@misc{11095,
  author       = {{Holzberg, Kim Maximilian}},
  pages        = {{39}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Kreieren einer Marke & Erstellung einer Webseite als Marketinginstrument}}},
  year         = {{2024}},
}

@misc{11097,
  abstract     = {{Die Corporate Sustainability Reporting Directive (CSRD) ruft eine Ausweitung des Kreises der zur Nachhaltigkeitsberichterstattung verpflichteten Gesellschaften hervor. Neben der Einführung einer materiellen Prüfungspflicht mit zunächst begrenzter Sicherheit unterliegt der Nachhaltigkeitsbericht kapitalmarktorientierter Unternehmen erstmals auch dem Enforcement durch die BaFin. Vor diesem Hintergrund beabsichtigt die European Securities and Markets Authority (ESMA) Leitlinien für das Enforcement durch die zuständigen nationalen Aufsichtsbehörden zu verabschieden. Im Dezember 2023 wurde ein Konsultationsentwurf veröffentlicht, welcher im vorliegenden Beitrag erörtert und kritisch gewürdigt wird.}},
  author       = {{Stawinoga, Martin}},
  booktitle    = {{Der Konzern}},
  issn         = {{1611-2296}},
  number       = {{2}},
  pages        = {{60--64}},
  publisher    = {{Handelsblatt Fachmedien}},
  title        = {{{Nachhaltigkeitsberichterstattung und Enforcement – Eine Analyse des ESMA-Konsultationsentwurfs}}},
  year         = {{2024}},
}

@misc{11098,
  abstract     = {{Diese Arbeit dokumentiert den Entwicklungsprozess des Bilderbuchs "Der Fühlmanix-Fluch", ein Bilderbuch für Kinder von 4 bis 6 Jahre. Thematischer Schwerpunkt ist neben dem Designvorgängen eine Betrachtung des Mediums "Bilderbuch" und Annäherung an den Themenkomplex "Emotionale Kompetenz".}},
  author       = {{Donga, Dominik}},
  keywords     = {{Bilderbuch, Illustration, Emotionen, Emotionale Kompetenz}},
  pages        = {{91}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Konzeption und Umsetzung eines Bilderbuches zum Thema Emotionen & emotionale Kompetenz}}},
  year         = {{2024}},
}

@misc{11101,
  abstract     = {{Diese Bachelorarbeit widmet sich dem Themenfeld der visuellen Effekte, welche zu den
Spezialeffekten gehören. Zunächst wird die generelle Entwicklung von visuellen Effekten des späten
19. Jahrhunderts bis zu den heutigen Produktionen herausgearbeitet. Dabei wird ein Schwerpunkt auf
fantastische und magische Elemente gesetzt; magische Elemente sind zum Beispiel
Zauberstab-Effekte. Dabei wird analysiert, wie sich die Ästhetik und Technik der Verfahren und
Visualisierung über die Zeit entwickelt haben. Das Ziel ist es, eine literarische Sammlung der
Visualisierung von fantastischen und magischen Elementen zu schaffen. Zum Schluss wird auf die
neusten Trends der heutigen Zeit eingegangen. Warum werden so viele magische und fantastische
Elemente in Filmen benutzt und was ist die Motivation hinter ihrer zunehmenden Verwendung in
Filmen? Wie wirken sie auf den Zuschauer?
}},
  author       = {{Davies, Lianne}},
  pages        = {{73}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{Die Entwicklung der Visualisierung von Magie im Realfilm}}},
  year         = {{2024}},
}

@misc{11103,
  author       = {{Assmann, Tizian}},
  publisher    = {{Technische Hochschule OWL}},
  title        = {{{Connecting Emotions - Eine Untersuchung von Bildikonen und ihre Rolle im Zeitalter von KI.}}},
  year         = {{2024}},
}

@misc{11108,
  author       = {{Wilhelm, Patrick and Müller, Ulrich and Gebhardt, Ronald}},
  keywords     = {{rheology, schwedoff, gelatine, gel former, plasticity, fracture, meat substitutes}},
  location     = {{Quakenbrück}},
  title        = {{{Rheologische Modelle – ein Beitrag für die systematische Entwicklung von Fleischersatzprodukten?}}},
  year         = {{2024}},
}

@misc{11112,
  author       = {{Frühwald-König, Katja}},
  location     = {{Großenmarpe}},
  title        = {{{Potenziale der Nutzung klimastabiler Holzarten –  Was braucht es für die Nutzung unserer zukünftigen Holzarten?}}},
  year         = {{2024}},
}

@misc{11113,
  abstract     = {{When oil palm lumber is considered for load-bearing products such as glued laminated timber (GLT), defined strength and stiffness values are required. In this investigation, combined GLT from oil palm wood is tested in compression parallel and perpendicular and glulam lamellas in tension parallel to the vascular bundles. Strength and Young´s modulus in compression and tension parallel increase with the density by power law relationship. In contrast to dicotyle­dons, the strength in construction size exceeds that of small, defect-free test specimens (compression strength perpendicular), are in the same range (tensile and bending strength parallel) or only a little below (compression strength parallel). The specimen size does not influence the strength. The ratio of fc,0 : fm : ft,0 is 1.2 : 0.8 … 1.7 … 2.6 : 1 and fc,0 : fc,90 = 2.7 … 13.0 … 32.6 : 1 for ρ = 200 … 400 … 600 kg/m³; the ratio of Ec,0 : Em : Et,0 is 1.2 : 1.3 : 1 for ρ = 400 kg/m³. Ashby´s performance indices for minimum weight design rise with the density; the strength-density performance indices are comparable or only slightly lower than that for structural size softwood, whereas the modulus-density performance indices are much lower. The challenge in use of oil palm wood for load-bearing construction products is the low stiffness.}},
  author       = {{Frühwald-König, Katja and Heister, Lena}},
  booktitle    = {{Wood material science and engineering}},
  issn         = {{1748-0280}},
  keywords     = {{Oil palm wood, compression, tension, strength, young’s modulus, digital image correlation, glued laminated timber}},
  number       = {{5}},
  pages        = {{1101--1116}},
  publisher    = {{Taylor & Francis}},
  title        = {{{Compression properties of glued laminated timber and tensile properties of gluelam lamellas from oil palm wood}}},
  doi          = {{10.1080/17480272.2024.2303627}},
  volume       = {{19}},
  year         = {{2024}},
}

@misc{11114,
  abstract     = {{Oil palm wood is mainly low in density and since strength and stiffness correlate with density, this study aimed to enhance the properties of oil palm wood through thermo-hygro-mechanical (THM) densification. In contrast to other studies using small laboratory-sized specimens, this study examined the densification of oil palm boards in sawn timber dimensions of 2.0 m length. Modulus of elasticity (MOE) and modulus of rupture (MOR) in bending, shear strength and shear modulus parallel by two-plate shear test and Young’s modulus in the three main directions as well as shear modulus in the three planes by ultrasonic testing were determined at densified and undensified specimens. The bending properties were increased to considerably higher levels and a compression ratio of 60% showed higher MOE and MOR values than that of 40%; whereas for boards of the inner part of the trunk, a compression ratio of 60% showed better results than that of 75%. The shear properties were only slightly increased through densification. Densification can improve the properties of oil palm wood. However, the wide range of density and properties found in natural oil palm wood is also present in densified oil palm wood.}},
  author       = {{Kölli, Nathan and Frühwald-König, Katja}},
  booktitle    = {{Wood material science and engineering }},
  issn         = {{1748-0280}},
  keywords     = {{Bending strength, densification, e-modulus, g-modulus, shear strength}},
  pages        = {{1--18}},
  publisher    = {{Taylor & Francis}},
  title        = {{{Elasto-mechanical properties of thermo-hygro-mechanical (THM) densified oil palm sawn timber}}},
  doi          = {{10.1080/17480272.2024.2317977}},
  year         = {{2024}},
}

@misc{11115,
  abstract     = {{Die Nachhaltigkeitsberichterstattung wird anhand zahlreicher Rahmenwerke, Standards und Leitfäden unter anwendungsorientierten Gesichtspunkten konkretisiert. Der Deutsche Nachhaltigkeitskodex (DNK) stellt einen Leitfaden dar, der Unternehmen die Berichterstattung über nachhaltigkeitsrelevante Aspekte des betrieblichen Handelns anhand von 20 Kriterien ermöglicht. Im Sommer 2023 wurde eine branchenspezifische Konkretisierung des DNK-Leitfadens für die Fahrradindustrie veröffentlicht. Der Fahrradbranche, die einen Beitrag zur Förderung der umweltfreundlichen Mobilität und infolgedessen Verkehrswende hervorzurufen vermag, wird damit ein Leitfaden für die Nachhaltigkeitsberichterstattung zur Verfügung gestellt. }},
  author       = {{Stawinoga, Martin}},
  booktitle    = {{  Zeitschrift für Corporate Governance : ZCG : Leitung und Überwachung in der Unternehmens- und Prüfungspraxis}},
  issn         = {{1868-7792}},
  number       = {{1}},
  pages        = {{34--41}},
  publisher    = {{Erich Schmidt Verlag}},
  title        = {{{Branchenleitfaden des Deutschen Nachhaltigkeitskodex – Eine Analyse der sektorspezifischen Handreichung für die Fahrradindustrie}}},
  year         = {{2024}},
}

@misc{11116,
  author       = {{Konjuschenko, Karina}},
  pages        = {{101}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Farben im Kostüm - Wie beschreiben Farben den Charakter einer Figur, im Hinblick auf "Gut" und "Böse"?}}},
  year         = {{2024}},
}

@misc{11119,
  abstract     = {{Das Thema der vorliegenden Bachelorarbeit ist dem Themenkomplex Softwarearchitektur zuzuordnen. Der Fokus liegt dabei explizit auf der Untersuchung der SOLID-Prinzipien hinsichtlich ihres Nutzens und ihrer Grenzen in der Spieleentwicklung. Um diese Untersuchung vorzunehmen, wurde die Spieleentwicklung als eine komplexe Form der Softwareentwicklung eingeordnet, in der sich Vorgehensmodelle wie Scrum und Anforderungsanalysen bewährt haben. Darüber hinaus wurden für die Untersuchung Anwendungsbeispiele der einzelnen SOLID-Prinzipien herangezogen, die dem eigens entwickelten Spiel entspringen. Die Entwicklung des selbst entwickelten Spiels wurde in der Unity Engine und der objektorientierten Programmiersprache C# durchgeführt. Um die fachliche Grundlage für die Anwendungsbeispiele zu liefern, wurden sowohl Grundprinzipien der objektorientierten Programmierung als auch elementare Funktionsweisen der Spiele-Engine Unity erläutert. Zusätzlich wurden Ziele der Softwarearchitektur dargelegt, um den Nutzen und die Grenzen der SOLID-Prinzipien entsprechend zu analysieren. Da die Entwicklung von digitalen Spielen eine komplexe Form der Softwareentwicklung ist, braucht es ein geplantes Vorgehen in der Entwicklung und eine angestrebte Softwarearchitektur. Diese Architektur kann durch die Entwurfsmuster der SOLID-Prinzipien erreicht werden. So ergibt sich bei Anwendung des Open-Closed-Prinzips ein Softwaresystem, das für den Fall, dass neue Funktionen oder Inhalte ergänzt werden sollen, erweiterbar bleibt. Dabei bleibt das System durch die Prinzipien Interface-Segregation, Dependency-Inversion und das Liskov’sche-Substitutions-Prinzip ein stabiles Konstrukt, bei dem keine problematischen Abhängigkeiten bestehen. Dadurch ist ein solches System einfach veränderbar, wenn nachträglich Anpassungen vorgenommen werden müssen, und besitzt
daher einen geringen Wartungsaufwand. Die Anwendung der SOLID-Prinzipien ist jedoch nicht immer sinnvoll. Bei der Anwendung des Interface-Segragation-Prinzip kann es zu einer hohen Anzahl von Schnittstellen kommen, die zu Unübersichtlichkeit führen kann. Dadurch werden Wartungsaufgaben intensiver, da sich zunächst ein Überblick über das kompliziert gestaltete System gemacht werden muss. Neben den SOLID-Prinzipien gibt es Entwurfsmuster, wie das Factory-Pattern und das Observer-Pattern, welche in dieser Arbeit nicht behandelt werden. Diese liefern, wie die SOLID-Prinzipien auch, Lösungen für wiederholt auftretende Problemstellungen in der Spieleentwicklung.}},
  author       = {{Sobioch, Till}},
  keywords     = {{Softwareentwicklung, Softwarearchitektur, Design-Patterns, Spieleentwicklung, Best Practices}},
  pages        = {{48}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Untersuchung der SOLID-Prinzipien: Nutzen und Grenzen in der Spieleentwicklung}}},
  year         = {{2024}},
}

@misc{11123,
  abstract     = {{Mehr und mehr kommt es einem so vor, als würde unsere Welt immer schneller und 
hektischer werden, und die Gesellschaft muss mitziehen. Auch Videospiele werden 
traditionell mit solchen Adjektiven beschrieben, jedoch stellt sich ein Gaming-Genre 
bewusst gegen diese Bewegung der Gesellschaft und zeigt, dass eine entspannte 
Herangehensweise an unseren heutigen Alltag durchaus eine valide Option ist. Es 
handelt sich hierbei um die sogenannten Cozy Games, „gemütliche“ Spiele, die den 
stressigen Alltag entschleunigen.
Diese Arbeit behandelt das Genre Cozy Games, wie es in der Branche einzuordnen
ist und sich darauf auswirkt, wieso es sich grade seit Beginn der 2020er an so 
großer Popularität erfreut und wie sich seine Zielgruppe zusammensetzt. Anhand 
dieser Erkenntnisse wird ein Konzept für ein eigenes Cozy Game erarbeitet und 
vorgestellt.
Das Cozy Games Genre gibt es so wie wir es heute kennen, noch nicht sehr lange, 
es nimmt auf dem Gaming-Markt aber zunehmend Platz ein. Angesiedelt in der 
Indie-Szene wird hier eine Relevanz deutlich. Denn Indie-Games gewinnen auf dem 
Videospielmarkt zunehmend an Bedeutung, was auch für die deutsche Wirtschaft 
im Games-Bereich einen wichtigen Faktor darstellt.
Was macht also ein Cozy Game aus und wie kann dies in einem Konzept umgesetzt 
werden?}},
  author       = {{Lewecke, Franziska}},
  keywords     = {{Game, Videospiel, Konzeptionierung, Game Design}},
  pages        = {{51}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Konzeptionierung eines Cozy Games im  Hinblick auf die Popularität des Genres in  der Games-Branche}}},
  year         = {{2024}},
}

@misc{11139,
  author       = {{Biche, Ellen}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Zwischen Voyeurismus und Interaktivität: Die Beeinflussung von performativem Reality-TV durch Social Media}}},
  year         = {{2024}},
}

@misc{11151,
  author       = {{Steinbeck, Rosa}},
  pages        = {{62}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Die digitale Anwendung physikalischer Kenntnisse über die Interaktion zwischen Licht und Oberfläche zur Schaffung von Fotorealismus, am Beispiel des Principled BSDF Shader.}}},
  year         = {{2024}},
}

@misc{12287,
  author       = {{Wittland, Sebastian}},
  location     = {{Berlin}},
  title        = {{{Allulose in Backwaren: Untersuchung und Charakterisierung der techno-funktionellen und sensorischen Eigenschaften von Allulose in Backwaren}}},
  year         = {{2024}},
}

@proceedings{12291,
  editor       = {{Atzenbeck, Claus and Rubart, Jessica}},
  isbn         = {{979-8-4007-1120-6}},
  location     = {{Poznan, Poland}},
  publisher    = {{ACM}},
  title        = {{{Proceedings of the 7th Workshop on Human Factors in Hypertext (HUMAN'24)}}},
  year         = {{2024}},
}

@inbook{12292,
  abstract     = {{Die pädagogische Professionalität des betrieblichen Ausbildungspersonals wird für eine gelingende Ausbildung im dualen System zunehmend wichtig. Die Haltung kann dabei als Faktor der reflexiven beruflichen Handlungskompetenz definiert werden. Anhand von Befragungen des InnoVET-Projekts Bildungsbrücken OWL werden Ein­stellungen von Ausbildenden zu Aus- und Weiterbildung untersucht und Ansatz­punkte für die Professionalisierung abgeleitet.}},
  author       = {{Schneider, Birgit and Meyer, Kirsten and Claes, Svenja}},
  booktitle    = {{Betriebliches Aus- und Weiterbildungspersonal im Fokus der Berufsbildungsforschung}},
  editor       = {{Bohlinger, Sandra and Krause, Ina and Dienel, Juliana and Kresse, Luisa and Niethammer, Manuela}},
  isbn         = {{9783763976355}},
  pages        = {{73--88}},
  publisher    = {{wbv Publikation}},
  title        = {{{Haltung und Einstellung des betrieblichen Ausbildungspersonals zu Aus- und Weiterbildung als Ausgangspunkt für die Professionalisierung}}},
  doi          = {{10.3278/9783763976362}},
  volume       = {{80}},
  year         = {{2024}},
}

@misc{12377,
  abstract     = {{The paper explores the rise and fall of the Karstadt department stores, which used to be the focal points of many German inner-cities throughout the twentieth century. The paper addresses the current issues of their obsolescence, decline and a recent increase in vacancies of the buildings. The desolation of those, once vibrant ´third places´ – commercial entities, but also communal spaces, where people could meet and socialize – is asking for reuse scenarios, and thus requires an assessment of those buildings, understanding of the layers of history, analysis of their values, but also their potentials to adapt to changing circumstances and societal needs. While focusing on this particular typology of the inner-city department stores and the specific case of Karstadt buildings, the paper aims to address the issue of decline of various retail facilities, but also a general decline of ´third places´ in cities. The term ´third places´ was coined by a sociologist Ray Oldenburg in 1989, and denotes places beyond home (the primary place) and work (the secondary place) such as community centres, cafes, public libraries, theatres, public parks, etc. The study aims to better understand both causes and socio-spatial effects of their decline, correlating it with the digitalisation shift, changes in retail culture, but also blurred conventional separation between the first, the second and the third places (emergence of the so-called co-living, co-working and co-mingling spaces). It presents several case studies and research focusing on reuse potentials. The paper argues that the ´third places´ have an important role in the well-being of local communities, in enhancing social cohesion, civic engagement and sense of belonging, and therefore need to remain focal in adaptive reuse proposals.}},
  author       = {{Dragutinovic, Anica and Pottgiesser, Uta}},
  booktitle    = {{Modern Futures: Sustainable Development and Cultural Diversity}},
  editor       = {{Torrent, Horacio}},
  location     = {{Santiago Chile}},
  publisher    = {{docomomo International}},
  title        = {{{Decline of department stores and the issue of ´third places´ in German inner-cities: decline, obsolescence and reuse potentials}}},
  doi          = {{10.25644/4kbv-p387}},
  year         = {{2024}},
}

@misc{12383,
  abstract     = {{Data stories are about revealing and communicating insights from complex data. In this paper, we propose conversational data stories, which support end users in understanding the key findings of the data analysis at hand by natural language conversation. Creating these stories manually means to put a lot of effort into understanding the data and crafting visuals. With increasingly powerful generative large language models (LLMs), natural language processing as well as automating the creation of data stories is a promising field. We present a concept for a conversational data storytelling system that integrates LLMs as well as explainable AI. We present the collected requirements for our system concept and how the requirements are addressed. To show the potential of our approach, we provide a use case scenario and a discussion in this paper. This is supposed to serve as a basis for future research that will aim at investigating the technical reliability and the user experience of such a system.}},
  author       = {{Grimm, Valentin and Rubart, Jessica and Söhlke, Patrick}},
  booktitle    = {{Proceedings of the 7th Workshop on Human Factors in Hypertext (HUMAN'24)}},
  editor       = {{Atzenbeck, Claus and Rubart, Jessica}},
  isbn         = {{979-8-4007-1120-6}},
  keywords     = {{Data Storytelling, Conversational Assistant, Conversational Data Storytelling, Explainable AI}},
  location     = {{Poznan Poland}},
  pages        = {{6}},
  publisher    = {{ACM}},
  title        = {{{Conversational Data Stories}}},
  doi          = {{10.1145/3679058.3688631}},
  year         = {{2024}},
}

@misc{12389,
  abstract     = {{Ressourcenverbrauch, CO2-Fußabdruck und Abfallaufkommen sind zentrale Themen bei der nachhaltigen Entwicklung der Bauwirtschaft. Besonders mit einem Gebäudeabbruch geht ein enormer Ressourcen- und Energieverlust einher. Diese Arbeit fokussiert den Abbruchprozess am Beispiel einer öffentlichen Verwaltung und analysiert die Möglichkeiten dieser, Kreisläufe von Bauteilen und -materialien in der lokalen Bauwirtschaft zu fördern. 
Zunächst wurde der IST-Prozess für einen Abbruch von Gebäuden am Beispiel des Kreis Lippe aufgenommen und Schwachstellen für die Wiedereinbringung von Bauteilen und -materialien identifiziert. Danach wurden Best Practice Ansätze von öffentlichen Verwaltungen in Deutschland recherchiert und anschließend dies um den europäischen Raum erweitert. Der letzte Teil der Analyse bezieht sich auf das RE-BUILD-OWL Projekt, mit welchem der Kreis Lippe plante eine Vorreiterrolle in zirkulärem Bauen einzunehmen, und wie die Projektergebnisse die Wiedereinbringung von Bauteilen und -materialien im Rückbauprozess positiv beeinflussen können. 
Es hat sich gezeigt, dass sich die Best Practice und die Projektergebnisse positiv auf die Schwachstellen des Abbruchprozesses auswirken können. Konkret wurden für den Kreis Lippe vier Handlungsempfehlungen formuliert. 1. Wissensaufbau: Zwar wurde deutlich, dass bei Einzelpersonen großes Fachwissen beseht, ein Austausch zwischen den Mitarbeitenden bestand jedoch nicht ausreichend. Außerdem besteht auch Bedarf an externen Schulungen geschult/ Sensibilisierung. 2. Digitalisierungsstrategie: Langfristig deutet sich im Bausektor ein Wandel zur Nutzung von Building Information Modeling ab. Es wird empfohlen, diesen Wandel im Kreis Lippe vorzubereiten, um die Mitarbeitenden in dem Wandel mitzunehmen und diese Veränderung proaktiv anzugehen. 3. Aktive lokale Marktgestaltung: Der lokale Markt lässt sich durch die Erhöhung der Nachfrage von verfügbaren Sekundärmaterialien und der Erhöhung des Angebotes von verfügbaren Sekundärmaterialien beeinflussen. Wenn zusätzlich innovative Technologien in der Region gefördert werden, lassen sich langfristig Materialkreisläufe entwickeln. 4. Baustoff- und Materialdistribution: Diese Handlungsempfehlung gilt als Teil der Erhöhung des Sekundärmaterialangebots. Um die Angebotserhöhung der Sekundärbauteile und -materialien zu bewerkstelligen, wurden zwei Optionen vorgeschlagen. Zum einen kann die Fremdleistung der Identifizierung und Distribution eingekauft werden, zum anderen ist eine interne Umsetzung mit Aufbau einer Bauteil- und Materialbörse möglich. Wichtig ist in beiden Schritten, dass vor einem Abbruch ein Audit des Gebäudes und eine Klassifizierung der Bauteile und -materialien auf Wiederverwendbarkeit durchgeführt wird. Eine mögliche Umsetzung der Veränderungen wurden in einer beispielhaften SOLL-Prozess-Darstellung skizziert. 
Die Ergebnisse dieser Arbeit zeigen das Potenzial sowie konkrete Schritte auf, die der Kreis Lippe hat, um Bauteile und -materialien in einem Kreislauf zu behalten. Die Best Practice Analyse ist nicht spezifisch für den Kreis Lippe durchgeführt worden, weshalb die Ergebnisse zusätzlich für einen allgemein übertragbaren Erkenntnisgewinn zur Verfügung stehen. Auch andere öffentliche Verwaltungen können anhand der Ergebnisse dieser Arbeit Handlungsschritte ableiten. }},
  author       = {{Steinkuhl, Anika}},
  keywords     = {{Zirkuläres Bauen, Kreislaufwirtschaft, Bauwirtschaft, Nachhaltiges Bauen, Materialkreisläufe, BIM, Building Information Modeling, construction industry, circular economy, sustainability, sustainable construction, circular construction, material cycles}},
  pages        = {{80}},
  publisher    = {{Hochschule Bielefeld}},
  title        = {{{Entwicklung strategischer Handlungsempfehlungen für die Förderung der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude}}},
  doi          = {{10.25644/rs7s-yc91}},
  year         = {{2024}},
}

@misc{12395,
  author       = {{Müller, Carolin and Alarinta, Jarmo and Frahm, Björn and Wirtanen, Gun}},
  location     = {{Lemgo}},
  title        = {{{Investigation of microbial spoilage in vegan foods}}},
  year         = {{2024}},
}

@misc{12396,
  author       = {{Gassenmeier, Veronika and Campolongo, Giovanni and Frahm, Björn}},
  location     = {{Edinburgh, UK}},
  title        = {{{Dissolved Carbon Dioxide in Addition to Dissolved Oxygen for In-situ Monitoring of Hybridoma Cell Culture}}},
  year         = {{2024}},
}

@misc{12397,
  author       = {{Blome, André and Luttmann, Mario and Segermann, Jan and Jekle, Mario and Frahm, Björn and Müller, Ulrich}},
  location     = {{Recklinghausen, Germany}},
  title        = {{{Process optimization in baked goods production using inline sensors and objective product evaluation}}},
  year         = {{2024}},
}

@unpublished{12400,
  abstract     = {{Determining cell density and cell viability is fundamental for any cell cultivation process. In addition to the manual counting method using hemocytometers, (semi-)automated methods offer advantages such as lower variability and shortened analysis times. However, these methods should provide at least comparable results to the manual method, which is why a comparison of methods is essential. We conducted a dilution series experimental design according to ISO 20391-2:2019 and compared two cell counting methods based on validation parameters aligned with the ICH Q2(R1) guideline. Regarding specificity and linearity, the manual (hemocytometer) and semi-automated (Countstar BioTech®) method exhibited similar results in the two evaluated characteristics total cell density and cell viability of CHO-K1 cells. Regarding repeatability of determining total cell density, the semi-automated method achieved significant (α = 0.05) better results with average relative standard deviations of < 6 %, than the manual method with average relative standard deviations of > 9 %. Concerning repeatability of the cell viability measurement, no significant difference between the two methods were shown. These results show the suitabililty of the dilution series experimental design. For the applied example, they indicate that the investigated semi-automated method is an appropriate alternative to the manual method.}},
  author       = {{Ramm, Selina and Odefey, Ulrich and Frahm, Björn and Pein-Hackelbusch, Miriam}},
  publisher    = {{bioRxiv}},
  title        = {{{Semi-automated vs. manual: Comparative study of cell culture counting methods using validation parameters}}},
  doi          = {{10.1101/2024.05.30.596619}},
  year         = {{2024}},
}

@misc{12402,
  abstract     = {{In anaerobic technology, pH values are crucial for targeted volatile fatty acid production. While pH dynamics can be modeled using the Anaerobic Digestion Model No. 1 (ADM1), simulation results may be biased. To address this issue, the pH prediction routine of Visual Water, a specialized water chemistry simulator, was validated. Unlike ADM1, it accounts for ionic strength and activities while also providing an automated uncertainty analysis. The analysis revealed Visual Water simulations to better fit measured pH data from acidic solutions in a miniaturized stirred-tank reactor.}},
  author       = {{Kosse, Pascal and Hernández Rodriguez, Tanja and Frahm, Björn and Lübken, Manfred and Wichern, Marc}},
  booktitle    = {{Chemie Ingenieur Technik}},
  issn         = {{1522-2640}},
  keywords     = {{Anaerobic Digestion Model No. 1 (ADM1), Anaerobic technology, pH simulation, Uncertainty assessment, Visual Water}},
  number       = {{4}},
  pages        = {{528--534}},
  publisher    = {{Wiley}},
  title        = {{{Comparative Analysis of pH Prediction Routines in ADM1 and a Specialized Water Chemistry Simulator}}},
  doi          = {{10.1002/cite.202300188}},
  volume       = {{96}},
  year         = {{2024}},
}

@misc{12405,
  author       = {{Bödeker, Maren}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Konzeption und Gestaltung eines Corporate Designs für die Detmolder Design Woche 2025}}},
  year         = {{2024}},
}

@misc{12435,
  author       = {{Krahnke, Angelika}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe }},
  title        = {{{Entwicklung einer Corporate Identity für ein fiktives Kleingewerbe im Bereich Stricken & Häkeln}}},
  year         = {{2024}},
}

@misc{12486,
  abstract     = {{Die Transformation zum zirkulären Bauen ist elementar, um ressourcenschonend, langlebig und klimagerecht zu bauen. Es wird ein Vokabular benötigt, um diesen Wandel zu benennen und in die Praxis umzusetzen (Seggewies et al., 2018). Als etabliertes Framework bilden die R-Strategien (z.B. Reduce, Reuse, Recycle) ein wirksames Instrument, um die Abfallhierarchie und die Übergänge zwischen den Lebenszyklen zu beschreiben (Kirchherr et al., 2018). Dabei sind sie für die Entwicklung zirkulärer Produkte, Prozesse und Geschäftsmodelle hilfreich (Prosperkolleg.ruhr, 2022). Eine Meta-Studie zeigt, dass knapp ein Drittel aller untersuchten Publikationen auf die R-Strategien verweisen, sich lediglich 13% auf baupraktische Lösungsansätze oder die Kombination dieser mit der Ökobilanzierung beziehen (Ossio, 2023).
Aktuell existiert somit kein spezifisches Vokabular, dass die R-Strategien anwendbar und verständlich im Kontext des zirkulären Bauens definiert. Im Rahmen des Verbundprojekts „CirQuality OWL plus“, werden Instrumente zur Umsetzung der Circular Economy regional entwickelt und implementiert, um aktiv Klimaschutz zu betreiben. Die vorliegende Veröffentlichung erweitert die R-Strategien für die verschiedenen Ebenen von Gebäuden ‒ Material / Ressource, Bauteil / Produkt und Gebäude ‒ sowie die differenzierte Betrachtung von Bestandsgebäuden und Neubauten. Anwendungsmöglichkeiten und -grenzen werden definiert und für den Übertrag in die Praxis dargestellt. Die spezifische Definition der R-Strategien für das zirkuläre Bauen ermöglicht eine klare Benennung zirkulärer Lösungen für verschiedene Akteure des Bausektors. Wissensmanagement und Kommunikationsfähigkeit bilden somit den Ausgangspunkt für die Bauwende.}},
  author       = {{Pusch, Lisa and Anstötz, Marie and Schwickert, Susanne and Pieper, Carolin and Maier, Angelika}},
  keywords     = {{R-Strategien, zirkulär, Kreislauf, Circular Economy, zirkuläres Bauen, Kommunen}},
  location     = {{Detmold}},
  title        = {{{R-Strategien als Instrument für zirkuläres Bauen}}},
  year         = {{2024}},
}

@misc{12495,
  abstract     = {{Das InnoVET-Projekt Bildungsbrücken OWL nutzte die Kulisse der 19. Landesgartenschau NRW, um verschiedene Beispiele für gelebte Nachhaltigkeit in der beruflichen Bildung vorzustellen und zu diskutieren.

Das Thema Nachhaltigkeit ist ein fundamentaler Bestandteil eines exzellenten beruflichen Bildungsökosystems.
dessen Herstellung und Weiterentwicklung eines unserer Hauptziele des Projektes sind. Um dieses
Ziel zu erreichen, bedarf es einer Zusammenarbeit verschiedener Institutionen und eines Wissenstransfers.
Damit wird die Gleichwertigkeit von beruflicher und akademischer Bildung gefördert und zugleich die gegenseitige
Wertschätzung gesichert. 

Als Grundlage für die Aktivitäten in der Arbeitsgruppe diente die folgende Definition von Nachhaltigkeit: „Nachhaltig handelt, wer die Lebensqualität der gegenwärtigen Generation sichert und gleichzeitig zukünftigen Generationen die Wahlmöglichkeit zur Gestaltung ihres Lebens erhält. Dabei sind umweltbezogene, wirtschaftliche und soziale Aspekte wichtig“.

Die Landesgartenschau (LGS) fand vom 20. April bis 15. Oktober 2023 unter dem Motto „Schön hier. Komm
gucken“ in Höxter statt. Dafür wurden die Stadtgärten künstlerisch und ökologisch neugestaltet. Das Ziel war
laut dem Veranstalter, die Lebensqualität der Einheimischen sowie die Aufenthaltsqualität in den bestehenden
Freianlagen zu verbessern. Erstmals gab es bei der Landesgartenschau in Höxter ein „Buntes Klassenzimmer“,
in dem die Themen der 17 Ziele für nachhaltige Entwicklung Kindern und Jugendlichen aller Schulformen
nähergebracht und erklärt wurden. }},
  author       = {{Breternitz, Annika and Brinkmann, Gero}},
  keywords     = {{BNE, Nachhaltigkeit, Berufliche Bildung, Wissenstransfer}},
  pages        = {{17}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Nachhaltigkeit und berufliche Bildung : Mit Nachhaltigkeit die Zukunft gestalten. }}},
  year         = {{2024}},
}

@misc{12497,
  abstract     = {{Potenziale erkennen, Chancen ergreifen, Wissen erweitern. Wie Vernetzung und Austausch die Qualität der (Aus-)Bildung verbessern können.
In einer vernetzten Welt gewinnt auch die bildungsbereichsübergreifende Vernetzung von Lehrenden an Bedeutung. Die Vernetzung von Personen aus Schule, Hochschule und Weiterbildungseinrichtungen untereinander sowie mit Ausbildungs- und Bildungsverantwortlichen aus Unternehmen und Institutionen bietet vielfältige Chancen und Potenziale. Durch den Austausch von Wissen, Erfahrungen und Methoden können Lehrende voneinander lernen, innovative Lehrkonzepte entwickeln und so die Qualität der (beruflichen) Bildung insgesamt verbessern.}},
  author       = {{Meyer, Kirsten and Breternitz, Annika and Briesenick, Jörg and Brinkmann, Gero and Hülsmann, Oliver and Kießler, Carsten and Thiel, Marc}},
  keywords     = {{Lernortkooperation, Berufliche Bildung, Vernetzung, Austausch, Lehrende}},
  pages        = {{29}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Bereichsübergreifende Vernetzung Lehrender : Voneinander füreinander profitieren}}},
  year         = {{2024}},
}

@misc{12499,
  abstract     = {{Von Pisa, über Bologna und Brügge nach Kopenhagen. Wie Bildungsbrücken OWL die Internationalisierung der Berufsbildung fördert.

Das InnoVET-Projekt Bildungsbrücken OWL setzt unter anderem auf berufliche Auslandserfahrung für Auszubildende, um schon frühzeitig das Bewusstsein für die Bedeutung eines internationalen Austauschs zu schaffen. Die Arbeitsgruppe (AG) Internationalisierung nahm sich der Aufgabe an, mit dem interaktiven Selbstlernkurs „Internationale Kompetenzen“ ein Angebot für Auszubildende zu schaffen, welches sie auf internationale Situationen, z.B. im
Rahmen eines Auslandspraktikums vorbereitet und eine interkulturelle Denkweise stärkt.}},
  author       = {{Kurschildgen, Christiane and Meyer, Kirsten and Rustemeyer, Marco}},
  pages        = {{12}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Berufsbildung international :  Internationale Kompetenzen stärken}}},
  year         = {{2024}},
}

@misc{12501,
  abstract     = {{Fünf Tage für die Vision beruflicher Bildung. Wie Design Sprints die Qualität der Ausbildung verbessern können. 

Innovationen in der dualen beruflichen Ausbildung sind tendenziell mit langwierigen Prozessen verbunden und erfordern die Abstimmung einer Vielzahl von Akteuren (vgl. KMK 2021). Zudem wird die Gruppe der Auszubildenden selten aktiv einbezogen, auch wenn Partizipation und Mitgestaltung als wesentliche Bestandteile für zukunftsfähige Entwicklungen gelten. Umso wichtiger ist es vor dem Hintergrund zahlreicher unbesetzter Ausbildungsplätze und des verschärften Fachkräftemangels geworden, die zukünftigen Fachkräfte aktiv einzubinden. Auszubildende sollen in den Mittelpunkt gestellt werden, um ihren Ideen und Lösungsvorschlägen Raum zu geben.}},
  author       = {{Breternitz, Annika and Meyer, Kirsten and Brinkmann, Gero and Gassiev, Mikhail and Schneider, Birgit and Timmermann, Heike}},
  keywords     = {{Design Sprint, Bridge Days, Innovation, Berufliche Bildung, Lernortkooperation}},
  pages        = {{16}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Bridge Days & Wahlpflichtfach Coaching. Ein Innovationsevent für Auszubildende der dualen Ausbildung. }}},
  year         = {{2024}},
}

@misc{12503,
  abstract     = {{Von unbeweglichen Systemgrenzen zu mehr Durchlässigkeit. Wie Bildungsbrücken OWL individuelle Bildungswege fördert.

Die duale Ausbildung soll für junge Menschen attraktiver werden. Doch wie kann das gelingen? Welche
Einflussfaktoren gibt es? Ein wichtiger Faktor ist die durchgängige Flexibilität. Flexibilität ist ein wichtiger
Aspekt in allen Bereichen des (Berufs-)Lebens geworden. Die (Berufs-)Bildung ist da keine Ausnahme.
Doch wie schafft man die flexiblen Strukturen in und zwischen den Systemen, die auf den ersten Blick
reglementiert sowie bürokratisiert sind und dadurch starr erscheinen? Mit diesen Fragestellungen hat
sich die Arbeitsgruppe (AG) „Flexible Bildungskarrieren“ im InnoVET-Projekt Bildungsbrücken OWL befasst
und Formate entwickelt, die die Durchlässigkeit zwischen den Bildungssystemen ermöglichen und
Gleichwertigkeit erzeugen - das Juniorstudium in der beruflichen Bildung und das [Komplementar!um].}},
  author       = {{Gassiev, Mikhail and Rodrigues, Joao Pedro and Seugling, René }},
  keywords     = {{Lernortkooperation, Berufliche Bildung, Durchlässigkeit, Flexibilität, Bildungskarrieren, Systemgrenzen}},
  pages        = {{20}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Flexible Bildungskarrieren : Attraktive Ausbildung durch Flexibilität. }}},
  year         = {{2024}},
}

@misc{12505,
  abstract     = {{Innovations- und Unternehmergeist wecken. Mit Bildungsbrücken OWL die ersten Schritte der Selbstständigkeit gehen.

Die Gründungssensibilisierung in der beruflichen Bildung ist ein wesentlicher Bestandteil der regionalen Wirtschaftsförderung und der individuellen beruflichen Entwicklung. In Ostwestfalen-Lippe, einer Region mit einer vielfältigen Wirtschaftsstruktur und einer starken Unternehmenslandschaft, gewinnt dieses Thema zunehmend an Bedeutung. Durch die Förderung von Unternehmergeist und Gründungskompetenzen werden nicht nur potenzielle Gründer:innen frühzeitig identifiziert, sondern auch das Bewusstsein für Selbstständigkeit und unternehmerisches Denken bei Auszubildenden und Fachkräften gestärkt. Das Teilprojekt „Gemeinsam Innovieren und Gründen“ des InnoVET-Projektes Bildungsbrücken OWL hat dazu eine Reihe innovativer Formate initiiert. Im Folgenden wird aufgezeigt, welchen Mehrwert eine gezielte Förderung in diesem Bereich für die regionale Wirtschaft und die individuelle Karriereentwicklung bieten kann.}},
  author       = {{Prager, Dirk and Schlüter, Jil and Steltenkamp, Ralf}},
  keywords     = {{Unternehmergeist, Gründungskompetenz, Lernortkooperation, Innovation, Unternehmergeist, Berufliche Bildung}},
  pages        = {{16}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Innovieren und Gründen : Gründungssensibilisierung in der beruflichen Bildung. }}},
  year         = {{2024}},
}

@misc{12507,
  abstract     = {{Was, wann, wie, woraufhin lernen? 
Selbstorganisiertes Lernen (SOL) ist eine zentrale Zukunftskompetenz und wesentlich für erfolgreiches Lernen in Berufsschule, Betrieb, Hochschule und Beruf. Es bildet die Grundlage für die Entwicklung von Handlungsfähigkeit in einer komplexen und sich stetig verändernden Lebens- und Arbeitswelt. Bildungsinstitutionen und Lehrende stehen vor der Herausforderung, Lernumgebungen zu schaffen, die SOL fördern und unterstützen. Dabei geht es nicht nur um Wissensvermittlung, sondern auch darum, Lernende zu befähigen, ihr Lernen selbst zu steuern und lebenslang fortzuführen (Boekaerts, 1999, S. 449).}},
  author       = {{Fries, Sophie and Meyer, Kirsten and Schäffer, Dennis}},
  keywords     = {{Selbstorganisiertes Lernen (SOL), Zukunftskompetenz, Handlungskompetenz, Lernen, Lernortkooperation, Wissensvermittlung, Eigenverantwortung, Lernkompetenz}},
  pages        = {{17}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Selbstorganisiertes Lernen unterstützen - aber wie? : Wie Bildungsbrücken OWL Eigenverantwortung und Lernkompetenz in der beruflichen Bildung stärkt. }}},
  year         = {{2024}},
}

@misc{12509,
  abstract     = {{Die  „Digitale Bildungsbrücke“ des InnoVET-Projekts Bildungsbrücken OWL zielt darauf ab, durch digitalen Zugang zu Bildungsressourcen die Chancengerechtigkeit in dezentralen ländlichen Regionen zu fördern. Die interoperable Plattform integriert Inhalte, Räume und technische Anlagen über Institutionsgrenzen hinweg. Dadurch wird die institutionsübergreifende Zusammenarbeit gefördert und wenig genutzte Ressourcen werden besser ausgelastet. Herausforderungen sind z. B. die Entwicklung intuitiver Oberflächen oder die Gewährleistung der IT-Sicherheit. Zukünftig soll ein vernetztes Bildungs-Ökosystem entstehen, das den Austausch zwischen Lernenden, Lehrenden und weiteren Akteuren erleichtert. Anhand des Praxisbeispiels wird das Konzept der digitalen Ressourcenteilung vorgestellt und diskutiert.}},
  author       = {{Hassan, Zia and Timmermann, Heike}},
  location     = {{Berlin}},
  title        = {{{Digitale Bildungsbrücke : Zugangshürden digital überwinden: Wie die digitale Bildungsbrücke Ressourcenteilung ermöglicht.}}},
  year         = {{2024}},
}

@misc{12573,
  author       = {{Schneider, Birgit and Schwarzer, Knut and Claes, Svenja}},
  keywords     = {{Ausbilder, Transfer, Austausch, Qualifizierung, Evaluation}},
  pages        = {{15}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Evaluation des Formats Ausbilder:innen Stammtisch - Ein kooperatives Lernformat aus dem InnoVET-Projekt Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12575,
  author       = {{Schneider, Birgit and Schwarzer, Knut and Claes, Svenja}},
  keywords     = {{Design Sprint, Bridge Days, Innovation, Berufliche Bildung, Lernortkooperation, Transfer, Evaluation}},
  pages        = {{15}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Evaluation des Formats Transferworkshop Bridge Days - Ein kooperatives Lernformat aus dem InnoVET-Projekt Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12577,
  author       = {{Schneider, Birgit and Schwarzer, Knut and Claes, Svenja}},
  pages        = {{51}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Evaluation des Formats Bridge Days - Ein kooperatives Lernformat aus dem InnoVET-Projekt Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12579,
  author       = {{Schneider, Birgit and Schwarzer, Knut and Claes, Svenja}},
  keywords     = {{Lernortkooperation, Bildungskarrieren, Brücken, Brückendialoge, Austausch, Netzwerk, Evaluation}},
  pages        = {{10}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Evaluation des Formats Brückendialoge - Ein kooperatives Lernformat aus dem InnoVET-Projekt Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12581,
  author       = {{Schneider, Birgit and Schwarzer, Knut and Claes, Svenja}},
  keywords     = {{Industrie 4.0, Lernortkooperation, Berufliche Bildung, Evaluation, Berufsorientierung, Projekttage}},
  pages        = {{19}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Evaluation des Formats Cyberphysischen Fabrik. Ein kooperatives Lernformat aus dem InnoVET-Projekt Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12583,
  author       = {{Schneider, Birgit and Schwarzer, Knut and Claes, Svenja}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Evaluation der Fachtage und der Innovationsworkshops. Kooperative Lernformate aus dem InnoVET-Projekt Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12585,
  author       = {{Schneider, Birgit and Schwarzer, Knut and Claes, Svenja}},
  keywords     = {{Fischertechnik, Lehrendenqualifizierung, Lernortkooperation, Berufliche Bildung, Multiplikatorenschulung, Workshop, Evaluation}},
  pages        = {{11}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Evaluation des Formats Fischertechnik Multiplikatorenschulung - Ein kooperatives Lernformat aus dem InnoVET-Projekt Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12587,
  author       = {{Schneider, Birgit and Schwarzer, Knut and Claes, Svenja}},
  keywords     = {{Industrie 4.0, Austausch, Transfer, Lehrendenqualifizierung, Berufliche Bildung, Ausbilder, Evaluation}},
  pages        = {{13}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Evaluation des Formats Industrie 4.0 Walks - Ein kooperatives Lernformat aus dem InnoVET-Projekt Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12589,
  author       = {{Schneider, Birgit and Schwarzer, Knut and Claes, Svenja}},
  keywords     = {{Innovation, Gründung, Entrepreneurship, Berufliche Bildung, Auszubildende, Evaluation}},
  pages        = {{34}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Evaluation des Formats Innovationsworkshops für Azubis - Ein kooperatives Lernformat aus dem InnoVET-Projekt Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12591,
  author       = {{Schneider, Birgit and Schwarzer, Knut and Claes, Svenja}},
  keywords     = {{Juniorstudium, Berufliche Bildung, Durchlässigkeit, Gleichwertigkeit, Lernortkooperation, Evaluation}},
  pages        = {{8}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Evaluation des Formats Juniorstudium - Ein kooperatives Lernformat aus dem InnoVET-Projekt Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12593,
  author       = {{Schneider, Birgit and Schwarzer, Knut and Claes, Svenja}},
  keywords     = {{Gleichwertigkeit, Durchlässigkeit, Berufliche Bildung, Lernortkooperation, Evaluation}},
  pages        = {{30}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Evaluation des Formats [Komplementar!um] - Ein kooperatives Lernformat aus dem InnoVET-Projekt Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12595,
  author       = {{Schneider, Birgt and Schwarzer, Knut and Claes, Svenja}},
  keywords     = {{Landesgartenschau, Höxter, Podiumsdiskussion, Berufliche Bildung, Evaluation}},
  pages        = {{8}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Evaluation der Podiumsdiskussion auf der Landesgartenschau Höxter - Eine Veranstaltung aus dem InnoVET-Projekt Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12597,
  author       = {{Schneider, Birgit and Schwarzer, Knut and Claes, Svenja}},
  keywords     = {{Entrepreneurship, Gründungskompetenz, Lehrendenqualifizierung, NFTE, Berufliche Bildung, Evaluation}},
  pages        = {{13}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Evaluation des Formats NFTE Schulung - Ein kooperatives Lernformat aus dem InnoVET-Projekt Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12599,
  author       = {{Schneider, Birgit and Schwarzer, Knut and Claes, Svenja}},
  keywords     = {{Racing Team, Berufliche Bildung, Lernortkooperation, Evaluation}},
  pages        = {{19}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Evaluation des Formats Racing Team - Ein kooperatives Lernformat aus dem InnoVET-Projekt Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12601,
  author       = {{Schneider, Birgit and Schwarzer, Knut and Claes, Svenja}},
  keywords     = {{Selbstorganisiertes Lernen, Lehrendenqualifizierung, Berufliche Bildung, Lernortkooperation, Evaluation}},
  pages        = {{20}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Evaluation des Formats Mikrofortbildungen zum Selbstorganisierten Lernen - Ein kooperatives Lernformat aus dem InnoVET-Projekt Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12603,
  author       = {{Schneider, Birgit and Schwarzer, Knut and Claes, Svenja}},
  keywords     = {{Selbstorganisiertes Lernen, Berufliche Bildung, Lehrendenqualifikation, Lernortkooperation, Evaluation}},
  pages        = {{25}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Evaluation der Formate Selbstorganisiertes Lernen - Kooperative Lernformate aus dem InnoVET-Projekt Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12605,
  author       = {{Schneider, Birgit and Schwarzer, Knut and Claes, Svenja}},
  keywords     = {{Gründungskompetenz, Entrepreneurship, Innovation, Austausch, Transfer, Evaluation}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Evaluation des Formats Start-Up Meet'n Greet - Ein kooperatives Lernformat aus dem InnoVET-Projekt Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12612,
  abstract     = {{This contribution introduces a method for goal-oriented and global reanalysis. It allows the prediction of changes in selected quantities of interest by using the changes in the primal and dual so lutions resulting from structural modifications (e.g., changes in shape, topology, or material properties). Theapproach uses a goal-oriented method that includes both primal and dual problems. In particular, this method is easy to integrate into existing finite element programs because it does not require derivatives with respect to design variables }},
  author       = {{Materna, Daniel}},
  booktitle    = {{	 The 9th European Congress on Computational Methods in Applied Sciences and Engineering : ECCOMAS Congress 2024 : 3-7 June 2024, Lisboa, Portugal}},
  location     = {{Lissabon}},
  publisher    = {{Scipedia, S.L.}},
  title        = {{{Approximate calculation of changes in local and global quantities due to design modifications.}}},
  doi          = {{10.23967/eccomas.2024.036}},
  year         = {{2024}},
}

@misc{12652,
  abstract     = {{Der Verbund Bildungsbrücken OWL hat zum Ziel, die Gleichwertigkeit akademischer und beruflicher Bildung zu fördern und Bildungskarrieren flexibler zu gestalten. Durch die Zusammenarbeit von Bildungspartnern in der Region OWL werden innovative Lernformate entwickelt und gemeinsame Lernorte etabliert. Der Verbund greift institutionsübergreifend Bedarfe Lernender und Lehrender auf und gibt Impulse, Bildung neu zu denken.}},
  author       = {{Claes, Svenja and Thiel, Marc}},
  location     = {{Hamburg}},
  pages        = {{27}},
  title        = {{{Bildungsbrücken OWL: Hybride Prozessgestaltung im Projekt Bildungsbrücken OWL. Ideen, Hürden, Gelingensbedingungen, Wirkungen}}},
  year         = {{2024}},
}

@misc{12663,
  author       = {{Claes, Svenja}},
  keywords     = {{Berufliche Bildung, Bildungsbrücken OWL, Kooperation, Austausch, Transfer}},
  location     = {{Paderborn}},
  title        = {{{Vorstellung des InnoVET-Projekts „Bildungsbrücken OWL“}}},
  year         = {{2024}},
}

@misc{12664,
  author       = {{Claes, Svenja and Thiel, Marc}},
  location     = {{Minden}},
  title        = {{{Impulse zum Thema Attraktivität, Qualität und Gleichwertigkeit der beruflichen Bildung - Bildungsbrücken OWL}}},
  year         = {{2024}},
}

@misc{12671,
  abstract     = {{It is a long-standing and well-appreciated tradition of Docomomo International to emphasize its diversity expressed in buildings, sites, and neighborhoods due to different geography, language, education, and personalities. The term multiple modernisms has been coined to express regional, stylistic, and constructive differences in the formal and philosophical expression of Modern Movement across the globe, within the continents, and even within countries. Docomomo conferences and Docomomo Journals have used and interpreted the term over the last 30 years to express and acknowledge the diversity in the growing community of national working parties. We only need to refer to the recent Docomomo Journal no. 67 (2022) on Multiple Modernities in Ukraine1, or no. 36 (2007) on Other Modernisms2, published in parallel with the 2006 Docomomo International Conference in Istanbul and Ankara (Turkey) with the same title. Other issues highlighted local and regional particularities together and, at the same time, referenced common roots and personal links, such as the preservation technology dossier no. 13 on Perceived Technologies in the Modern Movement 1918-1975 published by the International Specialist Committee on Technology (ISC/T) in 2014. In that publication, the specific and long-term collaborations of architects with engineers and artists were explored often leading to exceptional solutions in structure, design, and function.}},
  author       = {{Pottgiesser, Uta and Quist, Wido}},
  booktitle    = {{Journal / Docomomo International }},
  issn         = {{1380-3204}},
  number       = {{72}},
  pages        = {{2--3}},
  publisher    = {{University of Technology}},
  title        = {{{Disciples, Devotees, Scholars, and Friends}}},
  doi          = {{10.52200/docomomo.72.ed}},
  year         = {{2024}},
}

@inbook{12672,
  abstract     = {{Mass housing and prefabrication shaped global modernist architecture like no other aspect of industrialised construction. This book offers a comprehensive exploration of how both conventional and experimental prototypes and series gave rise to an architecture for all, often responding to crises, the imperatives of nation-building, and housing shortages by rapidly developing, distributing, and assembling structures.  The book’s contributions, with a geographical emphasis on Europe and Israel, offer innovative approaches to the history of prefabrication. Some explore partially unearthed empirical ground, such as cases from Finland and Sweden, while others offer a fresh interpretation of prefabrication’s role in the history of global architecture and planning after WWII, notably in the USSR and Italy. The chapters encompass a broad spectrum of topics, including colonial expansion, international collaboration, and the achievements and setbacks of industrialised design. The authors scrutinise the cultural impact of mass housing and prefabrication, tracing this influence through exhibitions, memory culture, and typologies, ultimately concluding with an outlook on the preservation and repair of structures and their adaptation for the future.  Within the broader context of transnational and regional research, Between Conventional and Experimental presents novel and forward-thinking approaches to prefabrication and mass housing. Drawing from transnational architectural history, construction history, housing studies, monument preservation, and exhibition studies, it effectively highlights the profound relevance of prefabrication history to our understanding of the cultural and material history of the built environment.}},
  author       = {{Pottgiesser, Uta}},
  booktitle    = {{Between Conventional and Experimental: Mass Housing and Prefabrication in Modernist Architecture.}},
  editor       = {{Hess, Regine  and Ben-Asher Gitler,  Inbal  and Fainholtz, Tzafrir and Allweil,  Yael }},
  isbn         = {{978-94-6270-404-6}},
  pages        = {{7--12}},
  publisher    = {{Leuven University Press}},
  title        = {{{Foreword}}},
  doi          = {{10.11116/9789461665515}},
  year         = {{2024}},
}

@book{12673,
  abstract     = {{Many African countries are home to extraordinary architecture that is virtually unknown. There are interpretations of Art Deco, International Style, Brutalism as well as of African vernacular architecture. Climate-responsive buildings with a fluidity of interior and exterior spaces play a large role. While many of these 20th century architects were of European origin, they were deeply influenced by their surroundings and found original, site-specific expressions, often in collaboration with African architects. A focus of the construction activities were educational buildings which played an important role for these young nations that mostly gained their independence in the 1960s. While some of the documented buildings have been restored, others are still awaiting reconstruction.}},
  editor       = {{Pottgiesser, Uta and Tostoes, Ana and Uduku, Ola}},
  isbn         = {{978-3-0356-2833-3}},
  keywords     = {{Modern Movement, Architecture Of Independence, Luanda, Maputo, Addis Ababa, Lagos, Accra, African Modernism, Brutalism, Art Deco, Mid-20th Century Architecture, African Modernist Architecture, Architectural Photography, Postcolonial Architecture, Vernacular Architecture, Postcolonial History, Hospital, School Building, Peatfield & Bodgener Architects, Tropical Modernism, Pancho Guedes, Church, Cathedral, Architectural Heritage, Modernist Design, Modern Design, Thermal Comfort, Climate Control, João Garizo Do Carmo}},
  publisher    = {{Birkhäuser}},
  title        = {{{Modernism in Africa The Architecture of Angola, Ghana, Mozambique, Nigeria, Rwanda, South Africa, Sudan, Tanzania, Uganda}}},
  doi          = {{https://doi.org/10.1515/9783035628357}},
  year         = {{2024}},
}

@misc{12674,
  abstract     = {{Docomomo International is proud to present the first Open Issue of the Docomomo Journal. Creating the opportunity for scholars, practitioners, policy makers, activists or any other group of authors to publish in our journal without having to wait for a thematic Special Issue on a theme that would fit their topic felt like the logical next step in (the continued) continuing professionalization of the Docomomo Journal. [...]}},
  author       = {{Pottgiesser, Uta and Quist, Wido}},
  booktitle    = {{Journal / Docomomo International}},
  issn         = {{1380-3204}},
  pages        = {{2--3}},
  publisher    = {{University of Technology}},
  title        = {{{From Newsletter to Open Issue}}},
  doi          = {{10.52200/docomomo.71.01}},
  volume       = {{71}},
  year         = {{2024}},
}

@misc{12675,
  abstract     = {{In 2022, Docomomo International launched a call for papers on Modern Movement in Ukraine together with Docomomo Ukraine. More than 20 proposals were received, most of them from authors based in Ukraine itself—despite the difficult circumstances. The Docomomo Journal 67 presented a first selection of those articles to display regional and architectural particularities and current challenges of archiving, documenting, protecting, and preserving the modern heritage. Nearly 100 examples of Ukrainian modern buildings were presented in a graphical overview. The modern Ukranian architecture was dominated by Constructivism from the mid-1920s to the early 1930s, with Kharkiv as the epicenter of production, while Socialist Realism with the Stalin Empire emerged from 1932, lasting until 1955, with Kyiv as the capital of Ukraine. From December 1919 to January 1934, Kharkiv was the first capital of the Ukrainian Soviet Socialist Republic and the cultural, economic, and educational center of the new Ukrainian Republic. The status as new capital led to prestigious master plans and construction projects, among them the world-famous Derzhprom building at Freedom Square–as a symbol of Constructivism–or the Kharkiv Tractor Factory–as a symbol of the industrialization of agriculture. The leading role of Kharkiv as a forerunner and capital of Constructivism is often expressed by the famous State Industry House (Derzhprom) built from 1925 to 1928. Being the only modern ensemble in Ukraine nominated as UNESCO World Heritage, it became and still is the focus of identification and pride—despite the many controversial reflections and discussions about the conservation efforts and changes carried out since the original construction in the 1950s and after the year 2000. This explains the many articles dealing with Freedom Square and Dherzprom as a reaction to the call for papers in 2022 and also Docomomo International’s commitment to dedicate this special issue of the Docomomo Journal to Kharkiv under the title From Constructivism to Modernism in Kharkiv.}},
  author       = {{Pottgiesser, Uta and Quist, Wido}},
  booktitle    = {{Journal / Docomomo International}},
  issn         = {{2773-1634}},
  keywords     = {{Constructivism, Docomomo, Kharkiv, Modernism}},
  pages        = {{2--7}},
  publisher    = {{University of Technology}},
  title        = {{{Kharkiv Modernism}}},
  doi          = {{10.52200/docomomo.70.ed}},
  volume       = {{70}},
  year         = {{2024}},
}

@misc{12676,
  abstract     = {{This issue of Docomomo Journal on the architects Dušan Grabrijan (1899-1952) and Juraj Neidhardt (1901-1979) keeps with the tradition of collaboration and discourse. The authors investigate, describe, and interpret the friendship, exchange, and works of both architects and their role in the modernization of Yugoslav architecture since the 1920s based on their international experience. Grabjian, the first graduate of Jože Plečnik at the University of Ljubljana, went to study in Paris in 1925-26, and Neidhardt worked in the studio of Le Corbusier in Paris from 1933-35.
Both Grabrijan and Neidhardt played crucial roles in articulating a Yugoslavian architectural identity that straddled modernism and regionalism. Their work in Bosnia and Herzegovina was groundbreaking in its insistence that modern architecture could not simply be imported from the West; it had to be adapted to the local climate, materials, and ways of life. They both remain influential in the study of how architecture can reconcile the tension between modern abstraction and regional specificity, and their work continues to be studied as a model for integrating global and local architectural practices.}},
  editor       = {{Pottgiesser, Uta and Quist, Wido}},
  issn         = {{2773-1634}},
  keywords     = {{Dušan Grabrijan, Juraj Neidhardt, Yugoslav architecture, Bosnia and Herzegovina, Slovenia}},
  pages        = {{108}},
  publisher    = {{ University of Technology—Faculty of Architecture and the Built Environment}},
  title        = {{{The Way towards Regional Modernities}}},
  doi          = {{https://doi.org/10.52200/docomomo.72 }},
  volume       = {{72}},
  year         = {{2024}},
}

@misc{12689,
  author       = {{Latos, Benedikt and Becks, Daniela and Gaillard, Antoine and Perau, Martin and Respondek, Bernd  and Kranz, Michael  and Kukulies, Jan  and Kruse, Christian }},
  booktitle    = {{Twentieth International Conference on Environmental, Cultural, Economic & Social Sustainability Conference Proceedings}},
  editor       = {{Humphreys, David }},
  isbn         = {{978-1-963049-41-1}},
  keywords     = {{ESG, AI, SME}},
  location     = {{Aveiro, Portugal}},
  publisher    = {{University of Aveiro}},
  title        = {{{Integration of Generative AI into a tool to assist participatory ESG double materiality assessment for SMEs}}},
  year         = {{2024}},
}

@misc{12695,
  abstract     = {{Previous CSCW research has paid increasing attention to regional innovation systems providing the context for CSCW research and design. In this paper we provide insights into attempts to intervene in such a regional innovation system via practice-oriented activities. Our findings describe experiences of co-creating knowledge around digitization of SMEs on a regional level, beyond individual company contexts. We reflect on the benefits and challenges such an approach affords and highlight the importance of interpersonal relationships and similarities between practices in different contexts to enable intended but also initially unexpected knowledge spillovers. Our findings highlight how a praxeological approach to CSCW can be influential in regional development programs, and open this field to CSCW research and design. We draw out lessons for similar interventions and outline fruitful avenues for future research.}},
  author       = {{Kudic, Muhamed and Krüger, Max and Gerbracht, Marc and Ahmadi, Michael and Boden, Alexander and Stein, Martin and Kotthaus, Christoph and Vitt, Nico and Unbehaun, David and Tolmie, Peter and Wulf, Volker}},
  booktitle    = {{Proceedings of the ACM on Human-Computer Interaction}},
  editor       = {{Nichols, Jeff}},
  issn         = {{2573-0142}},
  keywords     = {{Regional Development, Co-creation, Spillover, Knowledge Management}},
  pages        = {{Article No.: 86, Pages 1 -- 26}},
  publisher    = {{Association for Computing Machinery (ACM)}},
  title        = {{{Knowledge Spillover: Between Serendipity and Strategic Planning - Lessons for Practice-oriented Interventions into Regional Innovation Systems}}},
  doi          = {{10.1145/3637363}},
  volume       = {{8}},
  year         = {{2024}},
}

@misc{12696,
  abstract     = {{The conditions under which R&D resources are allocated either to individual or collective R&D projects are largely unexplored. We contribute to closing this gap by asking under which conditions firms – each of which occupies a unique position along the automotive industry value chain – may overcome innovation barriers and spend scarce resources for collective R&D projects. We use a framed laboratory experiment to scrutinize the of different situations on the decision to spend the R&D budget for individual or collective R&D projects. The framing originates from a real-world case study of the massive metal forging industry. We identify constellations that support budget spending for collaborative purposes, e.g., sequential decision-making, which also increase the overall welfare, even in the case of unequally distributed R&D budgets.}},
  author       = {{Buchmann, Tobias and Haering, Alexander and Kudic, Muhamed and Rothgang, Michael}},
  booktitle    = {{Journal of Innovation Economics & Management}},
  issn         = {{2032-5355}},
  keywords     = {{Collaboration, Economics of Innovation, experiment, Incentives, Public policy, R&D.}},
  number       = {{2}},
  pages        = {{191--222}},
  publisher    = {{De Boeck Université}},
  title        = {{{Overcoming Innovation Barriers along the Automotive Industry Value Chain – A Framed Experiment}}},
  doi          = {{10.3917/jie.044.0166}},
  volume       = {{44}},
  year         = {{2024}},
}

@misc{12697,
  abstract     = {{The automotive industry is extremely important in Germany and its OEMs and suppliers are still globally competitive. However, the shift from combustion engines to e-mobility drive trains is restructuring the industry. Accordingly, this paper analyzes the determinants affecting the emergence of e-mobility drive technologies in the automotive sector. In doing so, we emphasize the role of digital technologies in the sector’s environmental transformation, drawing from the “twin-transition” framework, where digital and green shifts mutually influence one another. Methodically, we use an event-history approach to empirically explore the early appearance of R&D activities in the form of patent-based or funded-project-based collaboration events at the regional level over the period 1990 to 2018. Our results indicate positive and significant relatedness between various digitalization variables and the early emergence of e-mobility activities in regions. At the same time, the geographical context appears to be only of marginal importance.}},
  author       = {{Wolf, Patrick and Kudic, Muhamed and Buchmann, Tobias}},
  booktitle    = {{Journal of Innovation Economics & Management}},
  issn         = {{2032-5355}},
  keywords     = {{Twin-Transition, Sustainable Transition, E-Mobility Regional Transition, Event History Analysis, R&D Collaboration}},
  number       = {{3}},
  pages        = {{95--122}},
  publisher    = {{De Boeck Université }},
  title        = {{{Digitalization and the Emergence of E-Mobility Technology in German Regions}}},
  doi          = {{10.3917/jie.pr1.0170}},
  volume       = {{45}},
  year         = {{2024}},
}

@misc{12699,
  abstract     = {{Using data from a survey of 3,700 German establishments, this study examines how the adoption of new digital technologies correlates with key labour market indicators: new hires, workload intensification and workforce qualifications. Findings from interviews reveal a mixed impact of digitalisation on job demands and employment dynamics. While some firms experience workforce relief, others face heightened workload pressures. Despite widespread adoption, there is scant evidence of significant job losses attributed to technology integration. Instead, the data suggests a modest trend towards job creation. Notably, investment in workforce training emerges as a crucial factor in managing the digital transition.}},
  author       = {{Pusch, Toralf and Kudic, Muhamed and Gerbracht, Marc and Hochhaus, Jacob}},
  booktitle    = {{Wirtschaftsdienst : Zeitschrift für Wirtschaftspolitik}},
  issn         = {{1613-978X}},
  number       = {{5}},
  pages        = {{356--358}},
  publisher    = {{ZBW}},
  title        = {{{Transformation der Arbeit durch die Einführung neuer digitaler Technologien}}},
  doi          = {{10.2478/wd-2024-0093}},
  volume       = {{104}},
  year         = {{2024}},
}

@misc{12707,
  abstract     = {{Die fortschreitende Digitalisierung prägt die Bildungswelt und erfordert von Lehrenden spezifische digitale Kompetenzen, die über traditionelle didaktische Kernkompetenzen hinausgehen und diese erweitern. Lehrende sind dazu angehalten digitale Medien zielgerichtet in der Lehre einzusetzen und gleichzeitig die digitalen Kompetenzen der Studierenden zu fördern. In dem Beitrag wird untersucht, wie Lehrende durch den Umgang mit dem Learning Management System (LMS) ILIAS diesen Anforderungen gerecht werden können. Im Rahmen des Verbundprojekts «DigikoS – Digitalbaukasten für kompetenzorientiertes Selbststudium» wurde hierfür eine Toolbox entwickelt, die Lehrende situativ und bedarfsorientiert unterstützen soll. Die zentrale Fragestellung des Artikels bezieht sich auf die Inhalte der Toolbox: Es galt herauszufinden, welche Lernangebote notwendig sind, um die digitalen Kompetenzen von Lehrenden für ihre digital gestützte Lehre sowie im Rahmen der Nutzung des LMS ILIAS zu erweitern. Zusätzlich wird dabei die Förderung der digitalen Kompetenzen sowie der Selbstlernkompetenz Studierender näher betrachtet, da diese wesentlich für ein erfolgreiches Lernen mit digitalen Medien sind. Hierfür erfolgt zunächst eine Vorstellung der Kompetenzanforderungen, welche durch Erfahrungen aus der Lehrpraxis ergänzt werden. Aus diesen Ergebnissen werden abschliessend die Inhalte der Toolbox abgeleitet. Der Beitrag bietet einen Einblick in die komplexe Thematik digitaler Kompetenzen in der Hochschullehre.}},
  author       = {{Stemmer, Janina and Lampe, Katherina and Terme, Sandra}},
  booktitle    = {{MedienPädagogik: Zeitschrift für Theorie und Praxis der Medienbildung}},
  issn         = {{1424-3636}},
  keywords     = {{digitale Kompetenzen, hybride Lehre, Weiterbildung, Lernmanagementsystem, ILIAS, LMS}},
  pages        = {{103--115}},
  publisher    = {{OAPublishing Collective}},
  title        = {{{Lehrende im Spannungsfeld zwischen Erwerb und Vermittlung von digitalen Kompetenzen}}},
  doi          = {{10.21240/mpaed/58/2024.06.30.x}},
  volume       = {{58}},
  year         = {{2024}},
}

@misc{12734,
  author       = {{Held, Nils}},
  pages        = {{52}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Transmediales Erzählen : Eine Geschichte in verschiedenen Medien am Beispiel von Star Wars}}},
  year         = {{2024}},
}

@inbook{12740,
  abstract     = {{The high-tech architecture of the 1970s–1990s is typically characterized by the use and exhibition of advanced technologies. In terms of appearance, these buildings often have innovative façades, supporting structures accentuated in color, and expressively displayed technology systems. Unfortunately, however, the rapid obsolescence of technology has often led to the complete replacement of the very systems that defined the architectural form. In 2023, an international conference at ETH Zurich in collaboration with Bauhaus-Universität Weimar explored the question of how best to deal with the structural legacy of technologically innovative architecture. This book summarizes the results and provides an overview of the current state of research.

Current state of research on high-tech architecture and its conservation
Overview of the opportunities and challenges of high-tech buildings
New findings on the topic of building within existing structures
Also available as a set with the congress volume Denkmal Postmoderne 978-3-0356-2783-1}},
  author       = {{Pottgiesser, Uta}},
  booktitle    = {{High-Tech Heritage : (Im)permanence of Innovative Architecture}},
  editor       = {{Brenner , Matthias  and Langenberg,  Silke  and Angermann ,  Kirsten  and Meier, Hans-Rudolf }},
  isbn         = {{978-3-0356-2784-8}},
  keywords     = {{preservation, maintenance, conversion, building culture, postmodern architecture, high-tech architecture, postmodernism, cultural heritage, architectural monument, historical monument, monument preservation}},
  location     = {{Zürich}},
  pages        = {{109--116}},
  publisher    = {{Birkhäuser}},
  title        = {{{Retracted: Structural Sealant Glazing (SSG): History, Construction, and Conservation Challenges}}},
  doi          = {{https://doi.org/10.1515/9783035627862-016}},
  year         = {{2024}},
}

@misc{12741,
  author       = {{Claes, Svenja}},
  location     = {{Lemgo}},
  title        = {{{Landesgartenschau : Nachhaltigkeit und berufliche Bildung ; Wie kann berufliche Bildung zu mehr Nachhaltigkeit beitragen? Veranstaltungen rund um die Landesgartenschau 2023}}},
  year         = {{2024}},
}

@misc{12743,
  author       = {{Claes, Svenja}},
  location     = {{Lemgo}},
  title        = {{{Wahlpflichtfach: "Teamcoaching im Innovationsprozess" : Coachingkompetenzen entwickeln und Innovationsformate auf Augenhöhe begleiten ; Wie kann die Verzahnung von beruflicher und akademischer Bildung auf mehreren Ebenen gelingen?}}},
  year         = {{2024}},
}

@misc{12745,
  author       = {{Claes, Svenja}},
  location     = {{Lemgo}},
  title        = {{{Digitale Bildungsbrücke :  Zugangshürden digital überwinden : Wie die digitale Bildungsbrücken Ressourcenteilung ermöglicht. }}},
  year         = {{2024}},
}

@misc{12747,
  author       = {{Claes, Svenja}},
  location     = {{Lemgo}},
  title        = {{{Internationale Kompetenz. : Internationale Denkweisen stärken online und selbstorganisiert ; Online-Selbstlernkurs "Internationale Kompetenzen"}}},
  year         = {{2024}},
}

@misc{12749,
  author       = {{Claes, Svenja}},
  location     = {{Lemgo}},
  title        = {{{Lernträger Tiny House gemeinsame Lernformate : Kollaboratives Lernen ; Wie können gemeinsame Lernprojekte Lernende aus der beruflichen und akademischen Bildung bereichern?}}},
  year         = {{2024}},
}

@inbook{12758,
  abstract     = {{hapter 6 explores the multifaceted relationship between NBS and human health in urban environments. It begins by discussing the interconnectedness of nature and human well-being, highlighting the potential of NBS in reducing environmental stressors, restoring capacities and inviting for a more (inter-)active lifestyle. The chapter then delves into specific aspects of health addressed by NBS, such as the mitigation of air pollution and the enhancement of thermal comfort. Additionally, it examines the role of allotment gardens in promoting well-being and social cohesion within urban communities. Furthermore, the chapter explores how NBS can encourage healthy behaviour among urban residents, offering insights into understanding behavioural patterns. Concluding with recommendations for practitioners, the chapter underscores the importance of effectively implementing NBS to improve health and well-being in urban settings. }},
  author       = {{Cardinali, Marcel and Bodenan, Philippe and Burov, Angel and Chancibault, Katia and Fleury, Ghozlane and Herpin, Sophie and Roy-Lisneuf, Jude Le and Sapin, Arnaud and Petrova, Milena Tasheva and Mutafchiiska, Irina}},
  booktitle    = {{Urban Inclusive and Innovative Nature - Fundaments and Practices for the Co-creation of Nature-based Cities}},
  editor       = {{Ferreira, Isabel and Caitana, Beatriz and Nunes, Nathalie and Ribal, Eddine}},
  isbn         = {{978-88-6835-519-7}},
  keywords     = {{Nature-based Solutions, Public health, Air pollution, Thermal comfort, Social cohesion, Physical activity}},
  pages        = {{302–369}},
  publisher    = {{Fondazione Giangiacomo Feltrinelli}},
  title        = {{{How Nature-based Solutions Promote Health & Wellbeing}}},
  year         = {{2024}},
}

@inbook{12759,
  abstract     = {{Co-creation is a process of jointly developing solutions, products, or services by engaging a variety of stakeholders. This approach leverages the collective knowledge, insights, and creativity of a diverse group to create more effective outcomes than what might be achieved through traditional, top-down approaches. In the context of urban regeneration, this involves bringing people together to conceive, discuss, plan, design, and implement solutions that possess a substantial added value. URBiNAT’s goal of establishing ‘Healthy Corridors’ and implementing Nature-Based Solutions (NBS) that promote social cohesion is based on an inclusive and democratic co-creation process as a means to unite the community in addressing shared needs and aspirations. Towards this end, we have designed a co-creation model based on a four-stage approach: Co-diagnostic (local diagnosis), characterizing the area of intervention in territorial, social and economic terms; Co-design (the project), involving citizens in the process of building ideas and strategies, and in the design of solutions; Co-implementation (construction), inviting citizens to participate in the production of solutions, through volunteer work or exchange of working hours; Co-monitoring (evaluation), challenging citizens to convey the benefits and potential drawbacks of the implemented solutions. The roadmap for the co-creation of nature-based solutions is based on the co-creation model, which was applied in the eight cities of the project.}},
  author       = {{Moniz, Gonçalo Canto and Eddine, Ribal and Nunes, Nathalie and Ferreira, Isabel and Caitana, Beatriz and Curi, Fernanda and Holz, Sheila and Antunes, Lia and Correira, Luis Miguel and Leite, Vitório and Bandeirinha, José and Rochette, Antonio and Lameiras, Jose Miguel and Truta, Beatriz and Marques, Teresa and Marques, Paulo and Mateus, Américo and Martins, Sofia and Leonor, Susana and Ilsebroekx, Raf and Valet, Nathalie and Ostergaard, Nanna and Restivo, Joana and Ferreira, José and Teixeira, Sara and Cardinali, Marcel}},
  booktitle    = {{Healthy Corridor Atlas: Roadmap for the Co-Creation of Nature-based Cities}},
  editor       = {{Canto Moniz, Goncalo and Lameiras, José Miguel and Eddine, Ribal and Leite, Vitório}},
  isbn         = {{978-88-6835-518-0}},
  pages        = {{17–72}},
  publisher    = {{Fondazione Giangiacomo Feltrinelli}},
  title        = {{{Four Stages of Co-Creation}}},
  year         = {{2024}},
}

@misc{12761,
  abstract     = {{For modern machines, factories and electric and autonomous vehicles, the importance of vreliable electrical connectors cannot be overstated. With an increasing number of connectors being used in machines, factories and vehicles, ensuring their reliability is crucial for comfort and safety alike. One of the key indicators of reliability is the lifetime of connectors. To evaluate the lifetime of electrical connectors, a testing method and a model for calculating their lifetime based on the test data were developed. The results from these tests were compared to failure analysis data from long-term field operations. The findings indicate that the laboratory tests can accurately reproduce the main failures observed in the field. However, such lifetime tests can be time- and labor-intensive. To address this challenge, a data-driven method is proposed that predicts the lifetime of electrical connectors using statistical analysis of electrical contact resistance data collected from short-term tests. The predictions from this method were compared to actual results obtained from long-term tests. A strong correlation was observed between the contact resistance development in short-term tests and the number of failures in later stages of testing. Thus, apart from predicting the lifetime of connectors, this method can also be applied for failure prognosis in real-time operations.}},
  author       = {{Song, Jian and Shukla, Abhay Rammurti and Probst, Roman}},
  booktitle    = {{Machines}},
  issn         = {{2075-1702 }},
  keywords     = {{electrical connectors, accelerated life testing, statistical model, lifetime prognosis, reliability, state of health}},
  number       = {{12}},
  pages        = {{474}},
  publisher    = {{MDPI}},
  title        = {{{The State of Health of Electrical Connectors}}},
  doi          = {{https://doi.org/10.3390/machines12070474}},
  volume       = {{7}},
  year         = {{2024}},
}

@misc{12784,
  abstract     = {{During pig slaughter, contaminants such as intestinal and stomach contents, bile, tubular rail fat, and reddish foam from the respiratory tract frequently appear on carcasses, potentially compromising meat safety. This study examined the impact of these contaminants on the bacterial loads of pig carcasses, using total bacterial counts and Enterobacteriaceae counts as hygiene indicators. Examination of the substances as such showed that intestinal and stomach contents were particularly conspicuous to undermine the carcase hygiene due to total bacterial counts of similar to 6.0 log10 CFU g-1 (intestinal content) and 5.5 log10 CFU g-1 (stomach content). Tubular rail fat showed varying contamination levels, from low (3.1 log10 CFU g-1) to high (6.4 log10 CFU g-1). The reddish foam had moderate contamination (4.3 log10 CFU g-1). Enterobacteriaceae levels mirrored these results at a lower level. Subsequently, a comparative study analysing bacterial levels in contaminated and in noncontaminated pork rind regions was performed. Even small amounts of intestinal and stomach contents led to significant increases in total bacterial counts of up to 3 log10 CFU cm-(2) and in Enterobacteriaceae counts (up to 5 log10 CFU cm-(2)). Other contaminants did not significantly raise bacterial levels: their total viable counts around 3.5 log10 CFU cm-(2) were similar to those of uncontaminated carcass areas. Nevertheless, they should be removed before further processing.}},
  author       = {{Tholen, Janna and Upmann, Matthias}},
  booktitle    = {{Letters in Applied Microbiology}},
  issn         = {{1472-765X}},
  keywords     = {{bile, stomach content, intestinal content, tubular rail fat, carcass contamination, slaughter hygiene}},
  number       = {{12}},
  publisher    = {{Wiley-Blackwell}},
  title        = {{{Contribution of the main contaminating materials during pig slaughter to the microbial numbers on carcasses }}},
  doi          = {{https://doi.org/10.1093/lambio/ovae125}},
  volume       = {{77}},
  year         = {{2024}},
}

@misc{12788,
  abstract     = {{The product environmental footprint (PEF) is one of two life cycle assessment methods from the European Commission. With their published recommendation on environmental footprint methods, the European Commission provides a framework to assess the PEF for every product in a company. Since there is a high probability that the PEF will be mandatory for companies shortly, it is crucial that this recommendation guides companies and mainly technical employees through all phases of the PEF and enables them to execute a PEF study correctly. Therefore, this paper aims to analyze the process of calculating a PEF for a product critically. A PEF study is conducted on a smart luminaire with the software program OpenLCA. The use case concludes that many aspects of the PEF still need to be clarified. Especially the calculation methods behind every impact category need to be more transparent. Further, a comparison of the use case with a provided tutorial from OpenLCA is made. The comparison shows that no information is available on how to model the end-of-life and the use stages, which are mandatory in a PEF study. (c) 2023 The Authors. Published by ELSEVIER B.V.}},
  author       = {{Mordaschew, Viktoria and Tackenberg, Sven}},
  booktitle    = {{5th International Conference on Industry 4.0 and Smart Manufacturing (ISM)}},
  editor       = {{Longo, F. and Shen, W. and Padovano, A.}},
  issn         = {{1877-0509}},
  keywords     = {{Product Environmental Footprint, Life Cycle Assessment, Sustainability, Cyber-physical Systems}},
  location     = {{Lisbon, PORTUGAL}},
  pages        = {{493--503}},
  publisher    = {{Elsevier BV}},
  title        = {{{The Product Environmental Footprint – A Critical Review}}},
  doi          = {{10.1016/j.procs.2024.01.049}},
  volume       = {{232}},
  year         = {{2024}},
}

@misc{12795,
  abstract     = {{Including disabled workers in value-creating work processes is a fundamental and guaranteed human right and is, therefore, an essential goal of society. In Germany, sheltered workshops create the conditions for this inclusion since they are essential to companies' value chains. A central challenge is the inclusion of disabled workers in the value-creation processes, such as in manufacturing or assembly areas. The skills of disabled workers vary since they have individual impairments. Therefore, this paper presents a digital human model, a Human Digital Twin (HDT), for disabled workers. The model maps their skills and supports the production planning and assembly processes. (C) 2024 The Authors. Published by Elsevier B.V.}},
  author       = {{Mordaschew, Viktoria and Duckwitz, Sönke and Tackenberg, Sven}},
  booktitle    = {{5th International Conference on Industry 4.0 and Smart Manufacturing (ISM)}},
  editor       = {{Longo, F. and Shen, W. and Padovano, A.}},
  issn         = {{1877-0509}},
  keywords     = {{Human Digital Twin, Industry 4.0, Sheltered Workshops, Production Planning}},
  location     = {{Lisbon, PORTUGAL}},
  pages        = {{745--751}},
  publisher    = {{Elsevier BV}},
  title        = {{{A Human Digital Twin of Disabled Workers for Production Planning}}},
  doi          = {{10.1016/j.procs.2024.01.074}},
  volume       = {{232}},
  year         = {{2024}},
}

@misc{12797,
  abstract     = {{Sheltered workshops face the challenge of meeting their manufacturing objectives while considering the individual competenciesand assistance needs of persons with disabilities. Moreover, work processes in sheltered workshops are weakly structured, allowing for frequent task interruptions and changes based on the preferences of impaired work persons. While the Industry 4.0 literature provides many real-time scheduling algorithms for incorporating multiple objectives and constraints, these algorithms fall short of the characteristics of sheltered workshops. The resource-constrained project scheduling problem (RCPSP) is an optimization problem for computing manufacturing plans considering multiple objectives and resource constraints. Among many different RCPSP variants proposed in the literature, the multi-skill RCPSP (MSRCPSP) variant considers the individual skills of work persons when generating manufacturing plans. With the ongoing digital transformation of enterprises, new assistance systems enter the market, providing individual support to impaired work persons and compensating for lacking skills and abilities. This paper proposes an MSRCPSP variant that incorporates assistance systems and learning tasks compensating for competence gaps in the skill matrix of impaired work persons. Furthermore, it decomposes tasks into individual work objects, which accounts for frequent task interruptions and task preferences of work persons. The algorithm is described and demonstrated using a manufacturing data set from an actual sheltered workshop. In a small evaluation study, the algorithm is tested by scheduling two impaired work persons in the assembly department of a medium-sized manufacturing company in the primary labor market. The evaluation study proves its real-world applicability and the suitability of scheduling algorithms for participation and inclusive work. }},
  author       = {{Herrmann, Jan-Phillip and Mordaschew, Viktoria and Tackenberg, Sven}},
  booktitle    = {{5th International Conference on Industry 4.0 and Smart Manufacturing (ISM)}},
  editor       = {{Longo, F. and Shen, W. and Padovano, A.}},
  issn         = {{1877-0509}},
  keywords     = {{Scheduling, Sheltered Workshops, Assistance System, Persons with Disabilities}},
  location     = {{Lisbon, PORTUGAL}},
  pages        = {{1329--1338}},
  publisher    = {{Elsevier BV}},
  title        = {{{A multi-skill RCPSP variant for persons with disabilities in sheltered workshops}}},
  doi          = {{10.1016/j.procs.2024.01.131}},
  volume       = {{232}},
  year         = {{2024}},
}

@misc{12813,
  abstract     = {{Autonomous Mobile Robots, as the advanced version of Automated Guided Vehicles have received a lot of interest and recognition in recent years. Simultaneous Localization and Mapping (SLAM) techniques enable the vehicles to independently navigate and map their surroundings so that they can drive autonomously in changing and uncharted areas. Due to the increasing importance and contributive development of SLAMs for automated guided vehicles and autonomous mobile robots, this study seeks to provide an in-depth analysis of well-known SLAM techniques developed and applied during the previous ten years. Well-known SLAM algorithms considered in this paper include GMapping, Cartographer, LIO-SAM, and so on. They are mainly examined and compared from the viewpoints of basic principles, sensor requirements, computing complexity, and performance. The aim of this paper is to offer insights into various SLAM approaches to researchers, practitioners, and developers in the field of automated guided vehicles and autonomous mobile robots, facilitating the selection of suitable SLAM methods for specific applications and fostering innovation in autonomous navigation and mapping.}},
  author       = {{Li, Li and Schulze, Lothar and Kalavadia, Kunal Satish}},
  booktitle    = {{5th International Conference on Industry 4.0 and Smart Manufacturing (ISM)}},
  editor       = {{Longo, F. and Shen, W. and Padovano, A.}},
  issn         = {{1877-0509}},
  keywords     = {{Automated Guided Vehicle, Autonomous Mobile Robot, Simultaneous Localization and Mapping, Robot Operating System}},
  location     = {{Lisbon, PORTUGAL}},
  pages        = {{2867--2874}},
  publisher    = {{Elsevier BV}},
  title        = {{{Promising SLAM Methods for Automated Guided Vehicles and Autonomous Mobile Robots}}},
  doi          = {{10.1016/j.procs.2024.02.103}},
  volume       = {{232}},
  year         = {{2024}},
}

@misc{12815,
  abstract     = {{Active learning of physical systems must commonly respect practical safety constraints, which restricts the exploration of the design space. Gaussian Processes (GPs) and their calibrated uncertainty estimations are widely used for this purpose. In many technical applications the design space is explored via continuous trajectories, along which the safety needs to be assessed. This is particularly challenging for strict safety requirements in GP methods, as it employs computationally expensive Monte-Carlo sampling of high quantiles. We address these challenges by providing provable safety bounds based on the adaptively sampled median of the supremum of the posterior GP. Our method significantly reduces the number of samples required for estimating high safety probabilities, resulting in faster evaluation without sacrificing accuracy and exploration speed. The effectiveness of our safe active learning approach is demonstrated through extensive simulations and validated using a real-world engine example.}},
  author       = {{Tebbe, Jörn and Zimmer, Christoph and Steland, Ansgar and Lange-Hegermann, Markus and Mies, Fabian}},
  booktitle    = {{International Conference on Artificial Intelligence and Statistics (AISTATS), Vol. 238}},
  issn         = {{2640-3498}},
  location     = {{Valencia, SPAIN}},
  pages        = {{1333--1341}},
  publisher    = {{MLResearchPress }},
  title        = {{{Efficiently Computable Safety Bounds for Gaussian Processes in Active Learning}}},
  year         = {{2024}},
}

@misc{12816,
  abstract     = {{Medical images need annotations with high-level semantic descriptors, so that domain experts can search for the desired dataset among an enormous volume of visual media within a Medical Data Integration Center. This article introduces a processing pipeline for storing and annotating DICOM and PNG imaging data by applying Elasticsearch, S3 and Deep Learning technologies. The proposed method processes both DICOM and PNG images to generate annotations. These image annotations are indexed in Elasticsearch with the corresponding raw data paths, where they can be retrieved and analyzed.}},
  author       = {{Cheng, Ka Yung and Pazmino, Santiago and Bergh, Bjoern and Lange-Hegermann, Markus and Schreiweis, Bjorn}},
  booktitle    = {{19th World Congress on Medical and Health Informatics (MEDINFO)}},
  isbn         = {{978-1-64368-456-7}},
  issn         = {{1879-8365}},
  keywords     = {{Medical image retrieval, data lake, DICOM, deep learning, elasticsearch}},
  location     = {{Sydney, AUSTRALIA}},
  pages        = {{1388--1389}},
  publisher    = {{IOS Press, Incorporated}},
  title        = {{{An Image Retrieval Pipeline in a Medical Data Integration Center.}}},
  doi          = {{10.3233/SHTI231208}},
  volume       = {{310}},
  year         = {{2024}},
}

@misc{12822,
  abstract     = {{A medical data integration center integrates a large volume of medical images from clinical departments, including X-rays, CT scans, and MRI scans. Ideally, all images should be indexed appropriately with standard clinical terms. However, some images have incorrect or missing annotations, which creates challenges in searching and integrating data centrally. To address this issue, accurate and meaningful descriptors are needed for indexing fields, enabling users to efficiently search for desired images and integrate them with international standards. This paper aims to provide concise annotation for missing or incorrectly indexed fields, incorporating essential instance -level information such as radiology modalities (e.g., X-rays), anatomical regions (e.g., chest), and body orientations (e.g., lateral) using a Deep Learning classification model - ResNet50. To demonstrate the capabilities of our algorithm in generating annotations for indexing fields, we conducted three experiments using two opensource datasets, the ROCO dataset, and the IRMA dataset, along with a custom dataset featuring SNOMED CT labels. While the outcomes of these experiments are satisfactory (Precision of >75%) for less critical tasks and serve as a valuable testing ground for image retrieval, they also underscore the need for further exploration of potential challenges. This essay elaborates on the identified issues and presents well-founded recommendations for refining and advancing our proposed approach.}},
  author       = {{Cheng, Ka Yung and Lange-Hegermann, Markus and Hövener, Jan-Bernd and Schreiweis, Björn}},
  booktitle    = {{Computational and Structural Biotechnology Journal}},
  issn         = {{2001-0370}},
  keywords     = {{DICOM images, Medical image captioning, Medical image interchange, SNOMED CT body structure}},
  pages        = {{434--450}},
  publisher    = {{Elsevier BV}},
  title        = {{{Instance-level medical image classification for text-based retrieval in a medical data integration center}}},
  doi          = {{10.1016/j.csbj.2024.06.006}},
  volume       = {{24}},
  year         = {{2024}},
}

@misc{12830,
  abstract     = {{Exploring the influence of green space characteristics and proximity on health via air pollution mitigation, our study analysed data from 1,365 participants across Porto, Nantes, Sofia, and H & oslash;je-Taastrup. Utilizing OpenStreetMap and the AID-PRIGSHARE tool, we generated nine green space indicators around residential addresses at 15 distances, ranging from 100m to 1500m. We performed a mediation analysis for these 135 green space variables and revealed significant associations between self-rated air pollution and self-rated health for specific green space characteristics. In our study, indirect positive effects on health via air pollution were mainly associated with green corridors in intermediate Euclidean distances (800-1,000m) and the amount of accessible green spaces in larger network distances (1,400-1,500m). Our results suggest that the amount of connected green spaces measured in intermediate surroundings seems to be a prime green space characteristic that could drive the air pollution mitigation pathway to health.}},
  author       = {{Cardinali, Marcel and Beenackers, Mariëlle A. and Timmeren, Arjan van and Pottgiesser, Uta}},
  booktitle    = {{  Health & place : an international journal ; a social science & medicine publication}},
  issn         = {{1873-2054}},
  keywords     = {{Greenspace, Mitigation, Air quality, Public health, Structural equation modelling}},
  publisher    = {{Elsevier BV}},
  title        = {{{Urban green spaces, self-rated air pollution and health: A sensitivity analysis of green space characteristics and proximity in four European cities}}},
  doi          = {{10.1016/j.healthplace.2024.103300}},
  volume       = {{89}},
  year         = {{2024}},
}

@misc{12831,
  abstract     = {{The overall Industry 4.0 developments and the highly dynamic threat landscape enhance the need for continuous security engineering of industrial components, modules, and systems. Security risk assessments play a major role to ensure a secure operation of Industrial Automation and Control Systems (IACSs) but are mostly neglected due to missing resources and a lack of human experts for the sophisticated manual tasks. Therefore, a method for information and process modelling regarding the automation of security risk assessments has been previously designed, but not yet evaluated. This work in progress begins the evaluation of the automated security risk assessment concept by investigating the related work and identifying the main deficits. The results include a requirements analysis for the verification and an outlook towards future evaluation aspects.}},
  author       = {{Ehrlich, Marco and Lukas, Georg and Trsek, Henning and Jasperneite, Jürgen and Kastner, Wolfgang and Diedrich, Christian}},
  booktitle    = {{2024 IEEE 20th International Conference on Factory Communication Systems (WFCS)}},
  isbn         = {{979-8-3503-1935-4}},
  issn         = {{2835-8511}},
  keywords     = {{Industry 4.0, Security, Risk Assessment, Automation, Requirements, Evaluation, Verification}},
  location     = {{Toulouse, FRANCE}},
  pages        = {{180--183}},
  publisher    = {{IEEE}},
  title        = {{{Requirements Analysis for the Evaluation of Automated Security Risk Assessments}}},
  doi          = {{10.1109/wfcs60972.2024.10540830}},
  year         = {{2024}},
}

@misc{12846,
  abstract     = {{The decarbonization of the energy supply is one of the biggest and most important challenges of the 21st century. This paper contributes to the solution of the energy crisis by investigating the stability of alcohols as e-fuels. The focus is on the investigation of the aging mechanism of the linear alcohols 1-hexanol and 1-octanol compared to the iso-alcohol 2-hexanol. It is analysed in detail how the time-dependent aging varies depending on the chain length and the position of the hydroxy-group, both in the liquid and in the gas phase. It is shown that a variety of aging products such as aldehydes, acids, short-chain alcohols and esters are formed during the aging of the n-alcohols by oxidation, decarboxylation, oxidative C-C bond cleavage and esterification. In contrast, the decomposition of the iso-alcohol is significantly lower. The results show that the total acid number is significantly higher for aged n-alcohols than for the aged iso-alcohos, while the kinematic viscosity decreases for all alcohols during aging. Carbon mass balancing shows that after accelerated aging for 120 hours, around 80% of the iso-alcohol is still present, compared to only around 57-63% for the n-alcohols. In addition, significantly fewer acids are formed with the iso-alcohol. In this study, iso-alcohols have a higher stability against thermo-oxidative aging compared to n-alcohols, showing their potential as e-fuels. Furthermore, the chain length of the alcohols has also an influence on aging, as more different aging products can be formed with increasing chain length.

This paper contributes to the solution of the energy crisis by investigating the stability of alcohols as e-fuels. The focus is on the investigation of the aging mechanism of 1-hexanol and 1-octanol compared to the 2-hexanol.}},
  author       = {{Lichtinger, Anne and Poller, Maximilian J. and Schröder, Olaf and Türck, Julian and Garbe, Thomas and Krahl, Jürgen and Jakob, Markus and Albert, Jakob}},
  booktitle    = {{  Sustainable energy & fuels : interdisciplinary research for the development of sustainable energy technologies }},
  issn         = {{2398-4902}},
  keywords     = {{OXIDATION, 1-OCTANOL, PERFORMANCE, CATALYSTS, KINETICS, ACID}},
  number       = {{15}},
  pages        = {{3329--3340}},
  publisher    = {{Royal Society of Chemistry (RSC)}},
  title        = {{{Thermo-oxidative aging of linear and branched alcohols as stability criterion for their use as e-fuels}}},
  doi          = {{10.1039/d4se00400k}},
  volume       = {{8}},
  year         = {{2024}},
}

@misc{12851,
  abstract     = {{Currently, numerous single-track railway lines are disused due to economic reasons. They could be reactivated by small vehicles that use only one rail and thus can be operated in both directions at the same time. MONOCABs are such small cabin-like vehicles, stabilized by a system of control moment gyroscopes and a trim mass. They could make an important contribution to improve the mobility offer especially in rural areas. Regarding the MONOCAB, there is currently no reference in comparison with other vehicles. In the context of mechanical design and construction, interdependencies with vertical stabilization occur. Torsional effects in particular can critically affect the stability. This paper investigates the influence of mechanical eigenmodes on the vertical stabilization system. Specific characteristics of the system (especially due to the gyroscopes) are highlighted by a model-based analysis. Moreover, a FEM modal analysis is used to examine the supporting frame of the vehicle. The results are compared to experimentally estimated frequency responses of a full-scale monorail vehicle.}},
  author       = {{Griese, Martin and Döding, Patrick and Schulte, Thomas}},
  booktitle    = {{Advances in Dynamics of Vehicles on Roads and Tracks III : Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, August 21–25, 2023, Ottawa, Canada - Volume 1: Rail Vehicles }},
  editor       = {{Huang, Wei  and Ahmadian, Mehdi }},
  isbn         = {{978-3-031-66970-5}},
  issn         = {{2195-4364}},
  keywords     = {{vehicle dynamics, roll stabilization, modal analysis}},
  location     = {{Ottawa, CANADA}},
  pages        = {{107--116}},
  publisher    = {{Springer Nature Switzerland}},
  title        = {{{Analysis of Mechanical Eigenmodes of a Self-stabilizing Monorail Vehicle}}},
  doi          = {{10.1007/978-3-031-66971-2_12}},
  year         = {{2024}},
}

@misc{12854,
  abstract     = {{Assessing nutrient loading and processing is crucial for water quality management in lakes and reservoirs. Quantifying and reducing external nutrient inputs in these systems remains a significant challenge. The difficulty arises from low monitoring frequencies of the highly dynamic external inputs and the limited availability of measures to reduce diffuse source loading. One option for the latter is the use of pre-dams, i.e. small impoundments at the inflow points into reservoirs, designed to retain nutrients by algal uptake and sedimentation. This study analyzes long-term (ranging from 8 to 22 years) nutrient and discharge time series for nine German pre-dams to assess their retention capacity. For that, we (i) quantified nutrient loading using four different mathematical methods, (ii) derived their retention efficiencies, and (iii) identified environmental factors determining the retention of nitrogen (N), phosphorus (P), and silica (Si). We show that retention of soluble reactive phosphorus (SRP) (43.6 %) and total phosphorus (TP) (39.9 %) is far higher than for nitrate (NO3) (15.3 %) and Si (15.9 %). The retention efficiency for SRP and TP was higher during the warm seasons because of higher algal nutrient uptake and thus higher nutrient sedimentation. Mixed effects models documented a significant positive effect of the pre-dams' hydraulic residence time (HRT) on retention efficiency. Pre-dams provide substantial service in retaining nutrients and help to protect downstream waterbodies from nutrient inputs. They provide effective measures for trapping nutrients including those originating from non-point sources.}},
  author       = {{Fernandes, Taynara and Shatwell, Tom and Schultze, Martin and Mi, Chenxi and Determann, Maria and Rinke, Karsten}},
  booktitle    = {{Water research : a journal of the International Water Association}},
  issn         = {{1879-2448}},
  keywords     = {{Nutrient load calculation, Phosphorus, Nitrogen, Silica, Retention efficiency, Lakes}},
  publisher    = {{Elsevier BV}},
  title        = {{{How efficient are pre-dams as reservoir guardians? A long-term study on nutrient retention}}},
  doi          = {{10.1016/j.watres.2024.122864}},
  volume       = {{272}},
  year         = {{2024}},
}

@misc{12855,
  abstract     = {{Global warming is shifting the thermal dynamics of lakes, with resulting climatic variability heavily affecting their mixing dynamics. We present a dual ensemble workflow coupling climate models with lake models. We used a large set of simulations across multiple domains, multi‐scenario, and multi GCM‐ RCM combinations from CORDEX data. We forced a set of multiple hydrodynamic lake models by these multiple climate simulations to explore climate change impacts on lakes. We also quantified the contributions from the different models to the overall uncertainty. We employed this workflow to investigate the effects of climate change on Lake Sevan (Armenia). We predicted for the end of the 21st century, under RCP 8.5, a sharp increase in surface temperature  and substantial bottom warming , longer stratification periods (+55 days) and disappearance of ice cover leading to a shift in mixing regime. Increased insufficient cooling during warmer winters points to the vulnerability of Lake Sevan to climate change. Our workflow leverages the strengths of multiple models at several levels of the model chain to provide a more robust projection and at the same time a better uncertainty estimate that accounts for the contributions of the different model levels to overall uncertainty. Although for specific variables, for example, summer bottom temperature, single lake models may perform better, the full ensemble provides a robust estimate of thermal dynamics that has a high transferability so that our workflow can be a blueprint for climate impact studies in other systems.}},
  author       = {{Shikhani, Muhammed and Feldbauer, Johannes and Ladwig, Robert and Mercado‐Bettín, Daniel and Moore, Tadhg N. and Gevorgyan, Artur and Misakyan, Amalya and Mi, Chenxi and Schultze, Martin and Boehrer, Bertram and Shatwell, Tom and Barfus, Klemens and Rinke, Karsten}},
  booktitle    = {{Water resources research : an AGU journal}},
  issn         = {{1944-7973}},
  keywords     = {{multi model ensemble (MME), CORDEX, LakeEnsemblR, lake modeling, climate change impacts, variance decomposition}},
  number       = {{11}},
  publisher    = {{American Geophysical Union (AGU)}},
  title        = {{{Combining a Multi‐Lake Model Ensemble and a Multi‐Domain CORDEX Climate Data Ensemble for Assessing Climate Change Impacts on Lake Sevan}}},
  doi          = {{10.1029/2023wr036511}},
  volume       = {{60}},
  year         = {{2024}},
}

@misc{12858,
  abstract     = {{To contribute to a better understanding of the dynamics of the atmosphere inside and above a forest, vertical profiles are flown with a remotely-controlled multicopter in the Steinkrug forest. This area is located over a slope in the Solling natural area in Lower Saxony (Germany), composed mostly of deciduous trees about 30 m tall. Fifteen vertical flights made near sunset between summer 2019 and spring 2020 were inspected from the surface to 100 m above ground level. These measurements provide information on the vertical structures of wind and temperature within and above the canopy, including the effects of shallow slope flows near the ground. Contrasting measurements downhill outside the forest were also made. The gathered data allow estimated profiles of the turbulent fluxes of sensible heat and momentum to be obtained by computing averages and fluctuations for layers of 5 m depth. A leaf area density profile in both leafy and leafless conditions could also be produced. The presence of a slope flow is inspected at both sites, and the applicability of existing theories is explored.}},
  author       = {{Wrenger, Burkhard and Cuxart, Joan}},
  booktitle    = {{Frontiers in Earth Science}},
  issn         = {{2296-6463}},
  publisher    = {{Frontiers Media SA}},
  title        = {{{Vertical profiles of temperature, wind, and turbulent fluxes across a deciduous forest over a slope observed with a UAV}}},
  doi          = {{10.3389/feart.2024.1159679}},
  volume       = {{12}},
  year         = {{2024}},
}

@phdthesis{12863,
  abstract     = {{This doctoral thesis critically examines green space characteristics and their proximity to residents in their ability to help reduce the global disease burden of non-communicable diseases. By dissecting three pivotal pathways of theorized green space health effects through increased physical activity, increased social cohesion, and reduced air pollution, the thesis aims to provide new insights into which green space characteristics drive these relationships and in which distance they occur. To achieve these aims, this thesis develops reporting guidelines for the research field, a QGIS script for automatization of green space indicator development and uses two complementary sources for data collection. It builds on the self-reported data on physical activity, social cohesion, air pollution, health and mental health from the URBiNAT project and its case studies in the four European satellite neighbourhoods Nantes-Nord (France), Porto-Campanhã (Portugal), Sofia-Nadezhda (Bulgaria), and Høje-Taastrup (Denmark) and complements it with a rigorous spatial analysis. This enabled a rigorous sensitivity analysis based on up to 135 structural equation models per pathway. The results of this doctoral research revealed distinct green space characteristics and proximities that drive each pathway, including thresholds where these associations disappear or even change direction. It concludes that interconnected, multi-use green corridors are more beneficial than isolated patches for all space strategies to shift focus from mere ratios to green mobility infrastructures. Although rooted primarily in European contexts and of a cross-sectional nature, the doctoral research provides new evidence for urban planning and public health. It emphasizes the practical implications of how to design green spaces to address health concerns. The results not only resonate with the WHO's Urban Health Research Agenda but also provide tangible recommendations for a healthier human habitat.}},
  author       = {{Cardinali, Marcel}},
  isbn         = {{978-94-6366-849-1}},
  issn         = {{2212-3202}},
  keywords     = {{Health, Green Space, Green Infrastructure, Well-being, Structural Equation Modeling}},
  pages        = {{312}},
  publisher    = {{A+BE}},
  title        = {{{Green Health. Examining the role of green space characteristics and their proximity in green space health pathways}}},
  doi          = {{10.71690/ABE.2024.09}},
  volume       = {{9}},
  year         = {{2024}},
}

@misc{12869,
  abstract     = {{Die Kurzdokumentation zur Öffnung von Strukturen konzentriert sich deshalb auf das Format desFormula Student Racing Teams. Sie zeigt auf, welche Schritte für die Öffnung dieses Formats erforderlich waren, wie Auszubildende für dieTeilnahme angeworben wurden und in welcher Form sie ins Team integriert wurden.}},
  author       = {{Brinkmann, Gero and Steltenkamp, Ralf and Thiel, Marc}},
  keywords     = {{Lernortkooperation, Berufliche Bildung, Vernetzung, Austausch, Lehrende, Auszubildende}},
  pages        = {{14}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Öffnung von Strukturen : Brücken bauen zwischen Bildungsbereichen, Bildungseinrichtungen, Unternehmen und Lernenden}}},
  year         = {{2024}},
}

@misc{12870,
  abstract     = {{Kooperation und Zusammenarbeit über die Grenzen der Bildungsbereiche hinweg sind zentrale Faktoren für ein optimales Umfeld beruflicher Bildung – gerade in ländlichen Regionen wie Ostwestfalen-Lippe (OWL). Aus dieser Überzeugung ist das InnoVET-Projekt Bildungsbrücken OWL entstanden. Hier kooperieren vier Partner, die ihre Sichtweisen, Expertisen und ihre Netzwerke in die Gestaltung des beruflichen Bildungsökosystems der Region gleichwertig einbringen.}},
  author       = {{Meyer, Kirsten and Breternitz, Annika and Briesenick, Jörg and Brinkmann, Gero and Hülsmann, Oliver and Kießler, Carsten and Thiel, Marc}},
  keywords     = {{Berufsbildung, Bildungsbrücken OWL, InnoVET, Kooperation, Bildungsökosystem, Exzellenz}},
  pages        = {{15}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Bereichsübergreifende Berufliche Bildung}}},
  year         = {{2024}},
}

@misc{12872,
  abstract     = {{The shift towards sustainable transportation is an urgent worldwide issue, leading to the investigation of creative methods to decrease the environmental effects of traditional vehicles. Electric vehicles (EVs) are a promising alternative, but the issue lies in establishing efficient and environmentally friendly charging infrastructure. This review explores the existing research on the subject of photovoltaic-powered electric vehicle charging stations (EVCSs). Our analysis highlights the potential for economic growth and the creation of robust and decentralized energy systems by increasing the number of EVCSs. This review summarizes the current knowledge in this field and highlights the key factors driving efforts to expand the use of PV-powered EVCSs. The findings indicate that MATLAB was predominantly used for theoretical studies, with projects focusing on shading parking lots. The energy usage varied from 0.139 to 0.295 kWh/km, while the cost of energy ranged from USD 0.0032 to 0.5645 per kWh for an on-grid system. The payback period (PBP) values are suitable for this application. The average PBP was demonstrated to range from 1 to 15 years. The findings from this assessment can guide policymakers, researchers, and industry stakeholders in shaping future advancements toward a cleaner and more sustainable transportation system.}},
  author       = {{Almasri, Radwan A. and Alharbi, Talal and Alshitawi, M. S. and Alrumayh, Omar and Ajib, Salman}},
  booktitle    = {{World Electric Vehicle Journal}},
  issn         = {{2032-6653}},
  keywords     = {{electric vehicle, solar charging station, transport, photovoltaic}},
  number       = {{5}},
  publisher    = {{MDPI AG}},
  title        = {{{Related Work and Motivation for Electric Vehicle Solar/Wind Charging Stations: A Review}}},
  doi          = {{10.3390/wevj15050215}},
  volume       = {{15}},
  year         = {{2024}},
}

@misc{12883,
  abstract     = {{Die digitale Transformation in der Landwirtschaft vollzieht sich mit neuen Technologien und Verfahren. Damit
verbunden sind Erwartungen an Produktivitätssteigerungen, Optimierung des Ressourceneinsatzes oder
verbesserte Nachhaltigkeitseffekte. Für etablierte Techniken gibt es bereits standardisierte Prüf- und
Testverfahren, deren Ergebnisse es den Landwirt*innen ermöglichen, die Technik zu bewerten. Bei digitalen
Technologien oder Lösungen fehlen solche Testverfahren bisher oder sind nicht standardisiert. Deshalb wurden
in einer vom Bundesministerium für Ernährung und Landwirtschaft (BMEL) eingesetzten und durch die
Bundesanstalt für Landwirtschaft und Ernährung (BLE) begleiteten Arbeitsgruppe der Stand der Technik, die
aktuellen Herausforderungen und mögliche Lösungsansätze diskutiert und Handlungsempfehlungen in Richtung
Wirtschaft, Politik und Forschung abgeleitet.
Die zugrunde gelegten Ziele waren dabei:
• Verlässlichkeit und Risiken digitaler Technologien für die Landwirt*innen transparent und verständlich dar-
stellen,
• Transparente und verständliche Bewertung der Güte der digitalen Techniken (z.B. Angaben zum „geprüften“
Einsatzraum, Vorhersagefehler),
• Bewertung der Funktionsfähigkeit, Verfügbarkeit und Anwendbarkeit,
• Einschätzung, ob das Produktversprechen eingehalten wird,
• Berücksichtigung von Sicherheitsaspekten bzw. Abschätzung bestehender Risiken.
In Bezug auf die aktuellen digitalen Technologien wurden insbesondere hochautomatisierte Maschinen für
landwirtschaftliche Prozesse sowie Entscheidungsunterstützungssysteme betrachtet. Bei Letzteren kommen
zunehmend auch KI-Verfahren zum Einsatz.
Für die Qualitätsbewertung solcher digitalen Technologien wurden folgende allgemeine
Handlungsempfehlungen abgeleitet:
• Transparente Informationsbereitstellung für den/die Landwirt*in bezüglich der Erfüllung des Produktverspre-
chens und der Schnittstellen,
• Freiwillige Qualitätsbewertung, außer bei gesetzlich vorgeschriebenen Prüfungen,
• Neu- und Weiterentwicklung von Mess- und Prüfverfahren für Praxisbedingungen.
Die nachfolgenden Kapitel bieten dazu einen detaillierteren Einblick und eine Verfeinerung der
Handlungsempfehlungen zu Mess- und Prüfverfahren}},
  author       = {{Beneke, Frank  and Gabriel, Andreas  and Gabriel, Doreen and Gandorfer, Markus  and Howind, Kai-Hendrik  and Kalmar, Ralf  and Meierhöfer, Johann  and Noack, Patrick  and Reckleben, Yves  and Römer,  Ingolf  and Rubenschuh, Ulrich  and Schmittmann, Oliver  and Staemmler, Nikolaus  and Umstätter, Christina  and Weis, Martin  and Wrenger, Burkhard}},
  keywords     = {{Produktversprechen, Standardisierung, Prüfverfahren, Testverfahren, Handlungsempfehlungen}},
  pages        = {{43}},
  publisher    = {{Thünen-Institut, Bundesforschungsinstitut für Ländliche Räume, Wald und Fischerei }},
  title        = {{{Wege zu einer Qualitäts- bewertung digitaler und technischer Lösungen in der Landwirtschaft}}},
  doi          = {{10.3220/WP1725352600000}},
  volume       = {{246}},
  year         = {{2024}},
}

@misc{12884,
  abstract     = {{Der Betrieb von Unmanned Aircraft Systems (UAS) stellt neben den Anforderungen an die Flugsicherheit auch Anforderungen an die Informationssicherheit. Als fliegende Rechnerverbünde sind sie schutzbedürftig, denn korrumpierte Firmwareupdates, ein Ausfall der Kommunikationsinfrastruktur oder manipulierte Datenbanken können zu einem Fehlverhalten des Fahrzeugs führen und damit dieses zu einer Gefahr für Menschen und Umwelt werden lassen. Der Schutz von Daten und die sichere Kommunikation mit dem unternehmensinternen Netzwerk machen daher eine genauere Betrachtung in punkto Informationssicherheit erforderlich. Informationssicherheit bei UAS ist aus zwei Perspektiven zu betrachten: zum einen aus der Sicht des UAS als Teilnehmer am Luftverkehr und zum anderen aus der Sicht des mobilen Endgeräts und Datenspeichers.
Grundsätzlich soll das vorliegende IT-Grundschutz-Profil den Beteiligten diese Bürde abnehmen und anhand einer Referenzarchitektur die wichtigen Fragen zur Informationssicherheit beim Betrieb von UAS klären. Insbesondere sollen folgende Fragen adressiert wer-den: Wie kann durch geeignete Maßnahmen der Informationssicherheit eine  Beeinträchtigung des sicheren Flugbetriebs vermieden werden? Wie können Gefahren für ein verbundenes Netzwerk abgewendet werden? Die Aspekte im Bereich Datenschutz, wie die daten-schutzkonforme Datenerhebung für den Betrieb der Drohne und die Datenverarbeitung von Bilddaten aus der Luft, unterliegen den entsprechenden gesetzlichen Bestimmungen und sind nicht Gegenstand des IT-Grundschutzprofils.
Die Gründe sich mit der Informationssicherheit beim Betrieb von UAS auseinanderzusetzen sind vielfältig. Die Wichtigsten dürften sein, Personen- und Sachschäden durch mangelhafte Informationssicherheit zu vermeiden. Dieses 
IT-Grundschutz-Profil ist dazu geeignet, Prozesse, die für die gebräuchliche IT-Landschaft etabliert wurden, auf den Betrieb von UAS zu übertragen. Dort, wo dies nicht möglich ist, wurden individuelle Bausteine entwickelt. Das 
IT-Grundschutz-Profil kann ferner als Element für eine Risikoanalyse zur Vorlage bei Luftfahrtbehörden dienen.}},
  author       = {{ Fehler, Jens and John, Kai Lothar  and Müller-ter Jung, Marco  and Rossol, Harald  and Rossol, Markus  and Schmitt, Corinna  and Wrenger, Burkhard}},
  pages        = {{32}},
  publisher    = {{Bundesamt für Sicherheit in der Informationstechnik }},
  title        = {{{IT-Grundschutz-Profil für den Betrieb von UAS Band 1: UAS-Betriebskategorie „Open (Offen)“}}},
  year         = {{2024}},
}

@misc{12891,
  abstract     = {{Copper alloy metal strips are widely used to manufacture electrical connectors. These connectors experience stress relaxation during operation. The reduced contact force may lead to contact failure. For the given design of connectors, the contact force is proportional to the Young's modulus which depends on interatomic bonds, alloying elements and the microstructure of metal grains. According to the literature, it is assumed that Young's modulus does not change significantly during long-term mechanical stress and aging at temperatures below the recrystallization temperature of copper alloys. Based on this assumption, the relaxation of connectors from lifetime tests and from long-term used field vehicles can be determined by the comparison of spring deflection of connectors before and after long-term tests or long-term use. The focus of this paper is to answer the question, whether this assumption is accurate. For this purpose, the influence of long-term thermal and mechanical loads on the Young's modulus of various copper alloys is investigated. The temperature in test approximately matches the maximum design temperature of automotive connectors and the mechanical stress is comparable to that in a typical connector.}},
  author       = {{Bünting, Karolin and Shukla, Abhay Rammurti and Song, Jian}},
  booktitle    = {{	 Electrical contacts - 2024 : proceedings of the Sixty‐Ninth IEEE Holm Conference on Electrical Contacts : 6-10 October 2024, Annapolis, MD, USA }},
  isbn         = {{979-8-3315-2907-9}},
  keywords     = {{Young's modulus, thermal and mechanical loads, spring deflection, relaxation}},
  location     = {{Annapolis, MD, USA }},
  publisher    = {{IEEE}},
  title        = {{{The Influence of Long Term Thermal and Mechanical Loads on the Young's Modulus of Cu-Alloys - Determination of Stress Relaxation in Electrical Connectors}}},
  doi          = {{10.1109/holm56222.2024.10768449}},
  year         = {{2024}},
}

@misc{12898,
  abstract     = {{In May 1999, about 30 people from Austria, Germany and Switzerland met in Basel (Switzerland) to found the German Chapter of the International Association for Landscape Ecology (IALE-D) to bring together Germanspeaking researchers, planners and other people interested in landscape ecology. Now, twenty-five years later, we take this milestone as an opportunity to reflect on the evolution of the topics that have shaped the landscape ecology discourse within the IALE-D community. In this editorial, we (1) present the history of the IALE-D conferences, (2) reflect on the topics addressed by the conference contributions and how they have developed, and (3) offer some initial indications of changes in relevance with regard to technological advances, thematic foci, transdisciplinarity, sustainability issues, and cultural dimensions that can be observed over time. Furthermore, we provide an overview of the articles published in 2024 in Landscape Online, which mainly reflect two emerging topics, which follow the lines of the thematic development of the IALE-D conferences, that is, a focus on urban environments as well as on pressing issues related to global change.}},
  author       = {{Rolf, Werner and Schirpke, Uta}},
  booktitle    = {{Landscape Online}},
  issn         = {{1865-1542}},
  keywords     = {{Landscape Ecology, Landscape Research, Land Sciences, History, IALE}},
  publisher    = {{Landscape Online}},
  title        = {{{Reflections on twenty-five years of landscape ecology discussion in the German-speaking IALE community}}},
  doi          = {{10.3097/lo.2024.1131}},
  volume       = {{99}},
  year         = {{2024}},
}

@inbook{12902,
  abstract     = {{Grüne Infrastruktur ist ein neuartiger Ansatz für die Landschaftsplanung. Seine Innovationspotenziale bestehen in der umfassenden Sicht auf Natur und Landschaft, die ökologische, sozio-kulturelle, ästhetische und ökonomische Aspekte beinhaltet und vielfältige gesellschaftspolitische Ziele wie den Klimawandel oder sozialen Zusammenhalt aufgreift. Das breit aufgestellte und in Teilen vage Konzept bietet gerade aufgrund der Interpretationsmöglichkeiten Chancen, um die Entwicklung von Landschaften aus unterschiedlichen Perspektiven zu diskutieren und zu integrieren. Die Planung und Umsetzung von grüner Infrastruktur erfordert daher partizipative Ansätze, die sowohl verschiedene Disziplinen und Interessensgruppen einbeziehen, als auch zivilgesellschaftliches Engagement berücksichtigen und fördern.}},
  author       = {{Pauleit, Stephan and Hansen, Rieke and van Lierop, Martina and Rall, Emily and Rolf, Werner}},
  booktitle    = {{Handbuch Landschaft}},
  editor       = {{Kühne, Olaf  and Weber, Florian  and Berr , Karsten  and Jenal, Corinna }},
  isbn         = {{978-3-658-42135-9}},
  issn         = {{2625-7009}},
  pages        = {{ 1119–1132}},
  publisher    = {{Springer Fachmedien Wiesbaden}},
  title        = {{{Grüne Infrastruktur und Landschaft}}},
  doi          = {{10.1007/978-3-658-42136-6_86}},
  year         = {{2024}},
}

@misc{12904,
  abstract     = {{It is crucial to identify defective machine components in production to ensure quality. Some components generate heat when defective, so automating the inspection process with a thermal imaging camera can provide qualitative measurements. This work aims to use computer vision methods to locate these components in thermal images. Since there is currently  no comparison of object detection and semantic segmentation algorithms for this use case, this study compares different architectures with the goal of localising these components for  further defect inspection. Moreover, as there are currently no datasets for this use case, this study contributes a novel annotated dataset of thermal images of combine harvester  components. The different algorithms are evaluated based on the quality of their predictions and their suitability for further defect inspection. As semantic segmentation and object  detection cannot be directly compared with each other, custom weighted metrics are used. The architectures evaluated include RetinaNet, YOLOV8 Detector, DeepLabV3+, and  SegFormer. Based on the experimental results, semantic segmentation outperforms object detection regarding the use case, and the SegFormer architecture achieves the best results  with a weighted MeanIOU of 0.853.  }},
  author       = {{Senke, Hanna and Sprute, Dennis and Büker, Ulrich and Flatt, Holger}},
  booktitle    = {{Forum Bildverarbeitung 2024 = Image Pocessing Forum 2024}},
  editor       = {{Längle, Thomas and Heizmann, Michael}},
  isbn         = {{978-3-7315-1386-5}},
  keywords     = {{industrial quality assurance, deep learning architectures, object localisation, Thermal images}},
  location     = {{Karlsruhe}},
  pages        = {{71--82}},
  publisher    = {{KIT Scientific Publishing}},
  title        = {{{Deep learning-based localisation of combine harvester components in thermal images}}},
  doi          = {{10.58895/ksp/1000174496-7}},
  year         = {{2024}},
}

@misc{12905,
  author       = {{Schünemann, Lennart and Büker, Ulrich}},
  location     = {{Lemgo}},
  title        = {{{Berechnung der Koplanarität und der stabilen Auflageflächen elektronischer, oberflächenmontierbarer Bauelemente}}},
  year         = {{2024}},
}

@misc{12906,
  author       = {{Subramanian, Ramakrishnan and Büker, Ulrich}},
  location     = {{Dortmund}},
  title        = {{{ODD monitoring in Autonomous Vehicles}}},
  year         = {{2024}},
}

@book{12908,
  abstract     = {{In diesem Open-Access-Tagungsband sind die besten Beiträge des 9. Jahreskolloquiums "Bildverarbeitung in der Automation" (BVAu 2024) enthalten. Das Kolloquium fand am 05. November 2024 auf dem Innovation Campus Lemgo statt. Die vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen Bildverarbeitung erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen enthaltenen anschaulichen Anwendungsbeispiele aus dem Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug.}},
  editor       = {{Jasperneite, Jürgen and Lohweg, Volker}},
  isbn         = {{978-3-662-70996-2}},
  issn         = {{2522-8587}},
  keywords     = {{Industrielle Kommunikationstechnik, Industrielle Bildverarbeitung, Network reliability and redundancy methods, Networked Control Systems, Wireless real-time communication, Open Access}},
  location     = {{Lemgo}},
  pages        = {{63}},
  publisher    = {{Springer Berlin Heidelberg}},
  title        = {{{Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024}}},
  volume       = {{19}},
  year         = {{2024}},
}

@misc{12920,
  author       = {{Hackel, Martin and Dr. Emmerich, Lukas}},
  location     = {{Olsberg}},
  title        = {{{Untersuchungen der Verwendungspotenziale alternativer Nadelholzarten für den modernen Holzbau}}},
  year         = {{2024}},
}

@misc{12921,
  author       = {{Hackel, Martin and Emmerich, Lukas}},
  location     = {{Lemgo}},
  title        = {{{Holz von morgen: Untersuchung der Verwendungspotenziale von Nordmann- und Nobilistanne}}},
  year         = {{2024}},
}

@misc{12922,
  author       = {{Hackel, Martin}},
  location     = {{Gütersloh}},
  title        = {{{Vielfalt der Bioökonomie an der TH OWL - Innovationen und Praxislösungen für eine nachhaltige Zukunft}}},
  year         = {{2024}},
}

@misc{12992,
  abstract     = {{In today's technology-driven world, the need for interdisciplinary skills is increasing. This has become challenging in tertiary education to provide students with applicable knowledge of various fields. Anderson's Adaptive Control of Thought (ACT) theory suggests that universities have traditionally focused on imparting declarative knowledge, which involves memorization of facts and concepts. However, imparting the ability to apply such knowledge on individual students and create procedural knowledge is the challenge. This includes teachers dealing with a diverse range of student abilities, particularly at university-level where they teach the same course content to students with different levels of prior knowledge and, given the structure of modern education systems, the resources required to monitor and provide feedback for a number of decisions and attempts independently performed by the students. Intelligent Tutoring Systems (ITS) have proven to be effective in addressing the aforementioned challenges by creating personalized learning environments that provide instant feedback, adapt to individual student needs, and promote the development of procedural knowledge. In the field of automation education at the university level, we are creating a 3D artificial intelligence (AI)-based ITS software named KIAAA (An AI Assistant for teaching in the field of automation), specifically designed to teach computer programming to students. KIAAA aims to assist students in transitioning from their abilities to procedural aptitude by providing personalized learning scenarios that allow them to apply their knowledge and receive immediate feedback. Our approach is based mainly on the pedagogical model of ITS, which focuses on creating a supportive and inclusive learning environment that promotes success for all students, regardless of their initial level of knowledge. One of the key aspects of our approach is the utilization of personalized learning. We propose a scheme that, subsequent to evaluate student's initial levels of procedural knowledge, creates 3D learning environments tailored to each individual student. By analyzing the solutions proposed by the students, we select the difficulty level of subsequent tasks. This approach takes into consideration student's discrete competence throughout the learning process, enabling them to progress on their prior knowledge. Additionally, the software provides customized feedback to each student on their performance, helping students identify areas that require improvement. Concepts for and implementations of ITS for a variety of fields, including introductory programming classes, have evolved for a long time. Our main contribution lies in presenting an end to end solution for ITS focused on teaching programming for automation students with realistically 3D simulated factory environments. While we strongly believe to have created a pedagogically sound, integrated intelligent teaching system for assisting programming classes in tertiary automation education, a robust user study for methodically evaluating our concept and implementation is still to be performed. Thus, we limit ourselves to presenting the underlying didactic concepts of KIAAA as a work in progress paper with a comprehensive evaluation to follow at a later date.}},
  author       = {{Ali, Asmar and Deuter, Andreas and Wehmeier, Leon}},
  booktitle    = {{FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference proceedings  / 2023 IEEE Frontiers in Education Conference (FIE)}},
  isbn         = {{979-8-3503-3643-6}},
  location     = {{Texas}},
  publisher    = {{IEEE}},
  title        = {{{Personalized Learning in Automation: A 3D AI-Based Approach}}},
  doi          = {{10.1109/fie58773.2023.10343228}},
  year         = {{2024}},
}

@misc{12993,
  abstract     = {{In computer science and related technical fields, researchers, educators, and practitioners are continuously automating recurring tasks for high efficiency in a wide variety of fields. In higher education, such tasks that educators face are the recurring review and assessment process of students' programming coursework. Thus, various attempts exist to automate the assessment and feedback generation for course homework and practicals in higher education. Those approaches for automated programming task assessment often comprise running automated tests to check for limited functional correctness and potentially style checking for various violations (LINTing). Educators familiar with large-scale automated task assessment are likely used to seeing hard-coded solutions specifically or accidentally designed to just pass the required tests, ignoring or misinterpreting the actual task requirements. Detecting such issues in arbitrary code is non-trivial and an ongoing research topic in software engineering. Software engineering research has yielded various semantic analysis frameworks, such as GitHub's CodeQL, which can be adapted for programming task assessment. We present a work-in-progress programming task analysis framework which employs CodeQL's analysis technology to identify the actual use of task-description-mandated syntactic and semantic elements such as loop structures or the use of mandated data blocks in branching conditions. This allows extending existing course work analysis frameworks to include a semantic check of an uploaded program which exceeds the relatively simple set of input-output test cases provided by unit tests. We use a running example of entry level programming tasks and several solution attempts to introduce and explain our proposed control flow and data flow -based analysis method. We discuss the benefits of including semantic analysis as an additional method in the automated programming task assessment toolbox. Our main contribution is the adaptation of an semantic analysis code framework to analyse syntactic and semantic components in students' programming coursework.}},
  author       = {{Wehmeier, Leon and Eilermann, Sebastian and Niggemann, Oliver and Deuter, Andreas}},
  booktitle    = {{FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference proceedings  / 2023 IEEE Frontiers in Education Conference (FIE)}},
  isbn         = {{979-8-3503-3643-6}},
  keywords     = {{Codes, Electronic learning, Soft sensors, Semantics, Education, Syntactics, Task analysis}},
  location     = {{Texas}},
  publisher    = {{IEEE}},
  title        = {{{Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis}}},
  doi          = {{10.1109/fie58773.2023.10342916}},
  year         = {{2024}},
}

@misc{13003,
  abstract     = {{In light of the rising importance of data transparency and open data guidelines (e.g. OGP Local1), Open Data Portals became standard in Smart City strategies (Van Oosterhout et al. 2020). While it is clear that these tools can serve as a valuable way for internal administration processes, at the same time it is critical that data is not only openly available following standard formats limited to computer-readability but above all also largely understandable for average citizens. For this reason, it is researched how open data can not only be made available but also visualized in an accessible way to all citizens. Moreover, the aim is to simultaneously boost private behavior changes which are inevitable to achieve locally-set goals in sustainability (Barr et al. 2011, TWI 2050 2018). To do so, we draw on the principle of nudging. Following
the tradition of behavioral economics, nudging is defined as a positive intervention that induces a voluntary change in behavior without resulting in external (negative) consequences (Thaler & Sunstein 2008) and thus contrasting interventions like commands or bans because freedom of choice is maintained (Mongin & Cozic 2020, Ranchordás 2020).
This paper discusses an installation that explored the potential of combining nudging and situated visualization to improve data transparency and support individual decision-making in urban public spaces. During the Detmold Design Week 2023, an event showcasing creative works in various locations, the visitor numbers at nine locations were captured using computer vision. Visitors then received on-site suggestions in real-time for the next place to visit based on the occupancy. A survey was conducted to evaluate visitors’ willingness to follow these data-informed suggestions. Findings highlight the importance of balancing between simplicity, relevance and privacy in data visualization. The results of the field test provide the foundation for the installation of interactive interfaces in Detmold's public spaces in the next years, in particular for communicating smart city topics focusing on mobility and urban climate protection.}},
  author       = {{Licht, Mareile and Barbosa Jardim, Amanda and Müh, Maximilian and Häusler, Axel}},
  booktitle    = {{Keep on Planning for the Real World. Climate Change calls for Nature-based Solutions and Smart Technologies : Proceedings of REAL CORP 2024, 29th International Conference on Urban Development, Regional Planning and Information Society }},
  editor       = {{Schrenk, Manfred and Popovich, Tatiana and Zeile,  Peter and Elisei, Pietro and Beyer, Clemens and Ryser, Judith and Kaufmann, Hans Rüdiger}},
  issn         = {{2521-3938}},
  keywords     = {{Situated Visualisation, Nudging, Planning, Computer Vision, Human-computer interaction}},
  location     = {{Mannheim}},
  pages        = {{645--653}},
  publisher    = {{CORP - Competence Center of Urban and Regional Planning }},
  title        = {{{The Use of Situated Visualized Data to Nudge Visitor’s Paths: a Case Study at the Detmold Design Week 2023}}},
  doi          = {{10.48494/REALCORP2024.9052}},
  year         = {{2024}},
}

@misc{13045,
  author       = {{Lauströer, Simon}},
  pages        = {{48}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{Lokale Vielfalt digital entdecken: Entwicklung eines App-Konzepts zur Förderung kleiner Verkaufsstände und Hofläden}}},
  year         = {{2024}},
}

@misc{13049,
  author       = {{Pilar von Pilchau, Katharina}},
  location     = {{Detmold}},
  title        = {{{Flächendeckende Bestimmung des dominierenden Abflussprozesses als Entscheidungshilfe zur Auswahl geeigneter Standorte für naturbasierte Lösungen zur Sturzflutvorsorge. Eine Analyse in ausgewählten hydrologischen Einzugsgebieten im Weserbergland}}},
  year         = {{2024}},
}

@misc{13085,
  abstract     = {{Dealing with modern heritage in times of crisis is addressing the global and local challenges that designers and planners and organizations like DOCOMOMO International have to recognize and analyze on different levels. When moving its headquarters back to TU Delft in 2022 the International Secretariat formulated three main areas of action for the running
programmatic period until 2025: sustainability, digitalization and education. Those themes are inherently connected to each other and are at the core of DOCOMOMO’s mission. But the organization is also challenged by divergent global shifts between the Global North and South. Documentation and conservation of modern heritage are understood not as luxurious
intellectual goods but as a direct contribution to sustainability within the scope of the United Nations Sustainable Development Goals (SDGs): saving resources, making cities better and providing education are main contributions.
The current 79 national working parties are dealing with different challenges and priorities related to the documentation and conservation of modern heritage in each region that need to be addressed differently. In a comparative approach the International Secretariat is analyzing the strenghts, weaknesses, opportunities and challenges of the national working parties in order to draw conclusions for the future workprogram. It can be noticed that the open access to many materials and research during the last two decades has already made a difference and allows for a smoother knowledge transfer, in particular among the younger generation. We also notice the diversity in the composition of the national working parties, coming from academia, professional or activists background. This diversity in expression and the local character of each national working party guarantee for the development of individual and suitable approaches. A priority on DOCOMOMO International’s agenda will be the provision of further material, including the digitization of old documents and the creation
of new documents, webinars or online-courses related to historical, technological or societal aspects of modern heritage and aiming at the improvement of our built and lived environment. Of particular interest is to provide access to affordable housing, food and water. }},
  author       = {{Pottgiesser, Uta}},
  booktitle    = {{ARCHITECTURE OF PUBLIC SERVICES BUILDINGS IN CENTRAL AND EASTERN EUROPE OF THE 20th CENTURY}},
  isbn         = {{978-83-64333-30-9 }},
  issn         = {{ 2657-3873}},
  keywords     = {{Global challenges, population growth, climate crisis, conflicts, natural disasters, alterations, conservation approaches, educational concepts}},
  location     = {{Gdynia}},
  pages        = {{14--21}},
  publisher    = {{City Hall of Gdynia and Faculty of Architecture of the Gdańsk University of Technology.}},
  title        = {{{Dealing with Modern Heritage in Times of Crisis}}},
  volume       = {{9}},
  year         = {{2024}},
}

@misc{13127,
  author       = {{Hall, Oliver}},
  location     = {{Eichstätt}},
  title        = {{{NACHHALTIGE ENTWICKLUNG DER KULTURLANDSCHAFT IN ZEITEN DES KLIMAWANDELS}}},
  year         = {{2024}},
}

@misc{13128,
  author       = {{Cardinali, Marcel and Savic, David and Vössing, Lukas and Tönsmann, Sarah Mae and Hall, Oliver}},
  publisher    = {{TH-OWL}},
  title        = {{{Stadtteilzentren als Lernende Räume}}},
  year         = {{2024}},
}

@book{13132,
  author       = {{Gutzmer, Alexander  and Vetter, Andreas}},
  isbn         = {{978-3-7667-2687-2}},
  keywords     = {{Best Workspaces, Preisträger, Geschichte 2024}},
  pages        = {{352}},
  publisher    = {{Callwey}},
  title        = {{{Best Workspaces}}},
  year         = {{2024}},
}

@misc{13164,
  author       = {{Hall, Oliver}},
  location     = {{Detmold}},
  title        = {{{Anpassung an Extremwetter im Zuge des Klimawandels}}},
  year         = {{2024}},
}

@inbook{13169,
  abstract     = {{KI.BAU is a project being developed and conducted at the Detmold School of Design, part of the University of Applied Sciences and Arts Ostwestfalen-Lippe. It focuses on researching the application of artificial intelligence (AI) in architectural design, modelling, production and management processes, particularly on the communication between users, processes and the building itself in various development and life-time phases. Hence the research aims to develop new tools and AI-supported process chains for the design, production and communication of architecture. This includes the training and implementing prototypical machine learning algorithms to autonomously evolve and optimize field-specific processes and workflows.
As mentioned above, a critical question KI.BAU explores is how we, as planners, builders and users, will communicate with architecture in the future, in its phases of creation and use but also beyond. This also involves, besides virtual interfaces, examining the physical interaction with a building, its behaviour, responsiveness and adaptation to certain conditions. 
The primary goal of the research at KI.BAU is to transform architecture into an intelligent, to some degree self-sustaining, self-reflective and maybe even evolving ‘ecological system’. This system should be comprehensively linked with its creators, users, devices, computers, its (biological) environment and networks. Consequently, a building must be viewed as an organism that communicates, interacts and adapts to other connected or related organisms and entities.
}},
  author       = {{Sachs, Hans}},
  booktitle    = {{Synthetic realities: New Frontiers in AI-driven Design, Fabrication and Materiality}},
  editor       = {{Kretzer, Manuel}},
  isbn         = {{978-3887781088}},
  keywords     = {{AI, Artificial Intelligence, Architecture, Build Environment, Building Construction, Ecology of Architecture}},
  pages        = {{14}},
  publisher    = {{AADR – Art Architecture Design Research}},
  title        = {{{KI.BAU Artificial Intelligence in Architecture}}},
  year         = {{2024}},
}

@misc{13172,
  abstract     = {{Pilze als konstruktives Baumaterial für eine nachhaltige Zukunft?
Studierende der TH OWL Standorte Höxter und Detmold forschen
an einem Baustoff, der weiterlebt.}},
  author       = {{Sachs, Hans}},
  booktitle    = {{52 Grad}},
  issn         = {{2566-8382}},
  keywords     = {{Mycelium als Baustoff, Alternative Baustoffe, Generative Modellierung, Digitale Fabrikation}},
  number       = {{16}},
  pages        = {{20--21}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{Mycelion-Pavillon}}},
  year         = {{2024}},
}

@misc{13173,
  abstract     = {{Traditionell – lokal – nachhaltig. Das beschreibt die Bauweise der
Stampflehmwände Kolumbiens. Wie lässt sich das durch neuartige,
digitale Technologien ergänzen und vereinen?}},
  author       = {{Kondziela, Andrea and Sachs, Hans}},
  booktitle    = {{52 Grad}},
  issn         = {{2566-8382}},
  keywords     = {{Bauen mit Lehm, Lehm als Baustoff, Bauen mit Robotern, Generative Fertigung, Digitale Fertigung, Alternatives Bauen}},
  number       = {{16}},
  pages        = {{24}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{Erde an Zukunft}}},
  year         = {{2024}},
}

@misc{13174,
  abstract     = {{Digitale Bauplanung für Architekt:innen
und Bauunternehmer:innen – wie
Masterstudierende ein Puzzle für die
Bauwelt entwickeln.}},
  author       = {{Sachs, Hans}},
  booktitle    = {{52 Grad}},
  number       = {{16}},
  pages        = {{25}},
  publisher    = {{Technische Hochschule Ostwestfalen Lippe}},
  title        = {{{Building Game}}},
  year         = {{2024}},
}

@misc{13179,
  abstract     = {{HUMAN 2024 is the 7th workshop of a series for the ACM Hypertext conferences. The HUMAN workshop has a strong focus on the user and thus is complementary to the strong machine analytics research direction that could be experienced in previous conferences.
The user-centric view on hypertext not only includes user interfaces and interaction, but also discussions about hypertext application domains as well as human-centered AI. Furthermore, the workshop raises the question of how original hypertext ideas (e.g., Doug Engelbart’s “augmenting human intellect” [6] or Jeff Conklin’s “hypertext as a computer-based medium for thinking and communication” [5]) can improve today’s hypertext systems.}},
  author       = {{Atzenbeck, Claus and Rubart, Jessica}},
  booktitle    = {{HT '24: Proceedings of the 35th ACM Conference on Hypertext and Social Media}},
  isbn         = {{979-8-4007-0595-3}},
  location     = {{Poznan Poland}},
  pages        = {{384--385}},
  publisher    = {{ACM}},
  title        = {{{Human Factors in Hypertext (HUMAN'24)}}},
  doi          = {{10.1145/3648188.3675117}},
  year         = {{2024}},
}

@misc{13182,
  author       = {{Rubart, Jessica}},
  booktitle    = {{hlbNRW-Informationsbrief}},
  number       = {{22}},
  pages        = {{2}},
  publisher    = {{Hochschullehrerbund – Landesverband Nordrhein-Westfalen e. V.}},
  title        = {{{Erfahrungsbericht zum Promotionskolleg NRW}}},
  year         = {{2024}},
}

@misc{13224,
  abstract     = {{This paper presents a robust methodology for optimizing CO2 emissions and electricity costs in industrial applications, with the aim of developing a flexible and dynamic energy management strategy that balances sustainability and cost-efficiency. Addressing the growing need for sustainable and economically viable energy solutions amidst the global urgency of climate change mitigation, the proposed approach is based on dynamic energy management techniques that minimize dependence on grid electricity, which can fluctuate between energy import and export. A flexible cost function is developed to simultaneously account for CO2 emissions and electricity prices, enabling a balance between environmental impact and operational costs. The optimization framework employs Mixed-Integer Linear Programming (MILP) to derive the optimal energy management strategy, showcasing significant potential for reducing both CO2 emissions and electricity costs. Although the methodology is demonstrated in a specific industrial setting, its flexible design ensures applicability across various energy profiles and operational scenarios, making it relevant for a wide range of industrial applications.}},
  author       = {{Mousavi, Seyed Davood and Griese, Martin and Schulte, Thomas}},
  booktitle    = {{2024 International Conference on Electrical and Computer Engineering Researches (ICECER)}},
  keywords     = {{CO2 Reduction, Electricity Cost Minimization, Life Cycle Assessment, MILP, Smart-E-Factory, Dynamic Energy Management}},
  location     = {{Gaborone, Botswana }},
  publisher    = {{IEEE}},
  title        = {{{Dynamic Optimization of CO<sub>2</sub> Emissions and Electricity Costs in Smart Factories}}},
  doi          = {{10.1109/icecer62944.2024.10920418}},
  year         = {{2024}},
}

@misc{13241,
  abstract     = {{Lighting in museums is crucial for showcasing exhibits while controlling light exposure to protect sensitive artworks. But what about enhancing the visitor experience, especially for the visually impaired? This research began with extensive desktop studies and evolved through collaboration between TH-OWL University in Detmold, Germany, who specialize in perception and spatial effects at the Institute for Design Strategies (IDS) and Buro Happold, integrated consulting engineers and advisors. Our partners include Sentistic, a startup providing sensors for anonymous space usage data, and Zumtobel, which supplied professional lighting equipment for our tests. We tested our hypotheses during a temporary exhibition on inclusion at DASA in Dortmund, Germany. The exhibition, titled “Respekt,” runs from May 2024 to February 2025. Our field study was divided into two phases to compare and assess lighting in different settings. The first phase used the museum’s standard lighting, while the second employed Zumtobel’s equipment to create a more balanced lighting scenario. Each phase lasted about one month. Our research utilized quantitative methods (photo surveys with 360° HDR imaging, statistical space usage data, and on-site light reflection measurements) and qualitative methods (interviews with visually impaired visitors and on-site observations). We gained significant insights from this initial study, which we aim to share with the museum community. We hope to engage more institutions in exploring how their spaces and exhibitions can better serve special visitors. While our focus began with the visually impaired, many other areas of inclusion remain to be researched. Our robust methodology can be applied to further studies in this field.}},
  author       = {{Nether, Ulrich and Longato, Paula}},
  booktitle    = {{Seventeenth International Conference on the Inclusive Museum Conference Proceedings}},
  isbn         = {{978-1-963049-87-9}},
  location     = {{Wien}},
  title        = {{{Research Lighting and Inclusion: How Can Lighting Create a Better Museum Experience for the Visually Impaired?}}},
  doi          = {{10.18848/978-1-963049-86-2/CGP}},
  year         = {{2024}},
}

@misc{13245,
  author       = {{Sapin, Arnaud and Cardinali, Marcel and Bodenan, Philippe and Fleury, Ghozlane}},
  location     = {{Brussels}},
  title        = {{{Study of the factor structure and measurement invariance of the Environmental Quality of Life Scale in three European cities. }}},
  year         = {{2024}},
}

@misc{13248,
  author       = {{Licht, Mareile and Barbosa Jardim, Amanda}},
  location     = {{Mannheim}},
  title        = {{{The Use of Situated Visualized Data to Nudge Visitor’s Paths: a Case Study at the Detmold Design Week 2023}}},
  year         = {{2024}},
}

@misc{13285,
  author       = {{Gerl, Niklas}},
  pages        = {{279}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Der Einsatz von künstlicher Intelligenz in der Filmindustrie}}},
  year         = {{2024}},
}

@misc{13327,
  abstract     = {{The aim of this study was to investigate if vibroacoustic methods may be used for the non-destructive determination of beef during its aging process. The vibroacoustic method was based on the observation of mechanical changes in the meat during the aging process and was compared with reference data obtained by Warner-Bratzler shear force measurement as well as sensory testing of the tenderness using a ten-part scale. To evaluate the mechanical properties, transfer functions were used representing the time dependency of the signal and thus the viscoelastic behaviour. In this study, a total of 31 roastbeef samples from 16 different young bulls and two older cows were examined from day of slaughter to day 21 of cold storage with regard to their tenderness. For this purpose, vibroacoustic measurements were carried out on the unprocessed/raw meat at intervals of 1–3 days. The reference measurements using sensor technology and Warner-Bratzler shear force measurement were carried out on the first (day of slaughter) and last (21st day) day on slices of roast beef cooked with saturated steam. In the results of all three methods, the shear force measurement, the sensory test and the vibroacoustic method, showed that roastbeef from the same animal but different halves produced different results. Basically, it is possible to predict the tenderness of roastbeef by taking measurements at the beginning of the maturing process for the end of the maturing period using vibroacoustic methods: Data analysis led to a trend function that roughly reflects the actual tenderness, which is generally higher than the real tenderness represented by the shear-force measurement. In order to obtain a better resolution for recording the mechanical changes during the aging process, the measurements should be carried out at shorter intervals.}},
  author       = {{Tholen, Janna and Gohe, Jan and Dörksen, Helene and Kiesel, Theo and Upmann, Matthias}},
  booktitle    = {{Food Physics}},
  issn         = {{2950-0699}},
  keywords     = {{Warner-Bratzler shear force, Vibroacoustic methods, Non-destructively measurement, Viscoelastic meat}},
  number       = {{9}},
  publisher    = {{Elsevier BV}},
  title        = {{{Tenderness prediction for beef using novel data analysis methods based on system dynamic and acoustic signals}}},
  doi          = {{10.1016/j.foodp.2024.100017}},
  volume       = {{1}},
  year         = {{2024}},
}

@misc{13351,
  abstract     = {{Sheltered workshops face the challenge of meeting their manufacturing objectives while considering the individual competencies and assistance needs of persons with disabilities. Moreover, work processes in sheltered workshops are weakly structured, allowing for frequent task interruptions and changes based on the preferences of impaired work persons. While the Industry 4.0 literature provides many real-time scheduling algorithms for incorporating multiple objectives and constraints, these algorithms fall short of the characteristics of sheltered workshops. The resource-constrained project scheduling problem (RCPSP) is an optimization problem for computing manufacturing plans considering multiple objectives and resource constraints. Among many different RCPSP variants proposed in the literature, the multi-skill RCPSP (MSRCPSP) variant considers the individual skills of work persons when generating manufacturing plans. With the ongoing digital transformation of enterprises, new assistance systems enter the market, providing individual support to impaired work persons and compensating for lacking skills and abilities.
This paper proposes an MSRCPSP variant that incorporates assistance systems and learning tasks compensating for competence gaps in the skill matrix of impaired work persons. Furthermore, it decomposes tasks into individual work objects, which accounts for frequent task interruptions and task preferences of work persons. The algorithm is described and demonstrated using a manufacturing data set from an actual sheltered workshop. In a small evaluation study, the algorithm is tested by scheduling two impaired work persons in the assembly department of a medium-sized manufacturing company in the primary labor market. The evaluation study proves its real-world applicability and the suitability of scheduling algorithms for participation and inclusive work.}},
  author       = {{Herrmann, Jan-Phillip and Mordaschew, Viktoria and Tackenberg, Sven}},
  booktitle    = {{Procedia Computer Science}},
  issn         = {{1877-0509}},
  keywords     = {{Scheduling, Sheltered Workshops, Assistance System, Persons with Disabilities}},
  pages        = {{1329--1338}},
  publisher    = {{Elsevier BV}},
  title        = {{{A multi-skill RCPSP variant for persons with disabilities in sheltered workshops}}},
  doi          = {{10.1016/j.procs.2024.01.131}},
  volume       = {{232}},
  year         = {{2024}},
}

@misc{13359,
  abstract     = {{Extracellular vesicles (EVs) have been recognized as major signaling mediators in a variety of physiological and pathophysiological conditions. Their paracrine effects are promoted via bioactive molecules. However an essential first step before a potential application of EVs in regenerative medicine is a batch-to-batch reproducibility of their therapeutic efficacy. For this a qualitative and quantitative testing of their potency is a necessary step. An adapted in vitro wound assay will be presented using a newly developed scratch machine and a computational-aided read-out. One of the major reasons for the onset of arteries clotting is gaining weight. During the development towards adipocytes, differentiating mesenchymal stem cells are highly metabolically active, which can activate primary endothelial cells (ECs).This is a crucial first step towards artery clotting. These activated ECs migrate in the adapted wound assay, which can be evaluated. We are able to count quantitatively the migrated ECs, monitor their migration behavior, e.g. speed, and isolate the migrated ECs to investigate their altered signal transduction pathways by comparing them with the non-migrating ECs. By evaluating the migration behavior, we record functional testing of EV potency, which was better than what could be archived using a Boyden Chamber.}},
  author       = {{Babczyk, Patrick and Odefey, Ulrich and Tobiasch, Edda}},
  location     = {{Malta}},
  title        = {{{Testing the Potency of Extracellular Vesicles derived from Differentiating Mesenchymal Stem Cells with an Adapted Wound Assay}}},
  year         = {{2024}},
}

@misc{13426,
  author       = {{Pusch, Lisa}},
  location     = {{Online}},
  title        = {{{A material world: Do we need new architects?}}},
  year         = {{2024}},
}

@misc{13427,
  abstract     = {{Kommunen haben eine hervorgehobene Rolle beim nachhaltigen Transformationsprozess des Bausektors. Unabhängig, ob es um eine Vorbildfunktion geht, der Verantwortung bei Klimaschutz, Artenvielfalt und Ressourcenschonung oder um die Förderung regionaler Wertschöpfung. Die Gründe für eine kommunale Vorreiterrolle sind vielfältig. Hinzu kommt der kommunale Auftrag einer abfallfreien Zukunft. Im Baubereich entstehen enorme Mengen an Abfall, die für die öffentliche Hand zu einer erheblichen Belastung geworden sind. Zirkuläres Bauen bietet geeignete Lösungen für all diese Herausforderungen. Für den Kreis Lippe gibt es somit ausreichend Gründe, zirkuläres Bauen als integralen Bestandteil der Daseinsvorsorge zu etablieren.
Basierend auf den Erfahrungen im Bereich Kreislaufwirtschaft des Konsortiums Lippe zirkulär hat der Kreis Lippe das Projekt RE-BUILD-OWL für zirkuläres Bauen ins Leben gerufen. Eine digitale Transferplattform und eine Roadmap für zirkuläres Bauen markieren den Einstieg des Kreises in das Thema. Diese Aufgabe wurde im Rahmen eines zweijäh-
rigen Roadmapping-Prozesses bearbeitet und in Zusammenarbeit mit Partnern und zahlreichen Akteuren im Kreis und der Region weiterentwickelt. Das Projekt baut dabei auf wissenschaftlichen und programmatischen Arbeiten auf, die im Rahmen verschiedener Forschungs- und Praxisprojekte zum Thema zirkuläres Wirtschaften und Bauen entstanden
sind.}},
  author       = {{Knauf, Gerald and Anton, Thomas and Berger, Andrea and Essling, Birgit and Kehl, Jan and Lanters, Mona and Pusch, Lisa and Schaubt, Manuel and Valentin, Dr. Anke}},
  keywords     = {{Zirkuläres Bauen, Kommunales Bauen, Öffentliche Bauherren, Nachhaltiges Bauen, Nachhaltigkeit, Circular Economy, Kreislaufwirtschaft, Entscheidungsroutinen, Roadmap, Kreis Lippe}},
  publisher    = {{Kreis Lippe – Der Landrat}},
  title        = {{{Roadmap: Zirkuläres Bauen für den Kreis Lippe. Zirkulär. Zukunftsweisend. Kommunal. Bauen}}},
  year         = {{2024}},
}

@misc{13520,
  author       = {{Felmeden, Jörg}},
  booktitle    = {{fbr-Wasserspiegel}},
  issn         = {{1436-0632}},
  number       = {{4/24}},
  pages        = {{14--17}},
  publisher    = {{fbr Dialog GmbH}},
  title        = {{{Gemeinsam die Zukunft gestalten - Sektor übergreifendes Netzwerk wasser^plus OWL}}},
  volume       = {{29}},
  year         = {{2024}},
}

@misc{13521,
  abstract     = {{Die derzeit relevanten Probleme und Herausforderungen der Wasserwirtschaft in Deutschland lassen sich häufig gemeinsam besser lösen als im Alleingang. Die vom Land Nordrhein-Westfalen geförderte Kooperationsplattform wasserplus OWL möchte in diesem Zusammenhang relevante Akteure und Strukturen zusammenbringen und legt gleichzeitig einen Schwerpunkt auf die Gewinnung von Nachwuchskräften. Der vorliegende Beitrag stellt das Netzwerk vor und gibt einen Einblick in erste Aktivitäten.}},
  author       = {{Yavuz, Irem and Felmeden, Jörg}},
  booktitle    = {{energie | wasser-praxis}},
  issn         = {{1436-6134}},
  number       = {{4}},
  pages        = {{70--72}},
  publisher    = {{wvgw Wirtschafts- und Verlagsgesellschaft Gas und Wasser mbH}},
  title        = {{{Gemeinsam für die Zukunft aufstellen : Sektor-übergreifendes Netzwerk wasser^plus OWL}}},
  volume       = {{75}},
  year         = {{2024}},
}

@misc{13553,
  author       = {{Regehr, Laura and Kost, Susanne and Schwickert, Susanne}},
  title        = {{{NACHHALTIGKEIT | RECHNER UND APPS FÜR DEN ALLTAG}}},
  year         = {{2024}},
}

@misc{13571,
  author       = {{Lehe, MS and Halbeisen, Georg and Steins-Loeber, S and Paslakis, G}},
  booktitle    = {{Journal of Eating Disorders}},
  issn         = {{2050-2974}},
  number       = {{1}},
  publisher    = {{BioMed Central}},
  title        = {{{Invisible walls? Stigma-related perceptions are associated with reduced help-seeking intentions for disordered eating in men}}},
  doi          = {{10.1186/s40337-024-01152-3}},
  volume       = {{12}},
  year         = {{2024}},
}

@misc{13575,
  abstract     = {{Background: Adolescents' early responses and overall outcomes during anorexia nervosa (AN) treatment may differ by patient gender, raising the question of whether evaluating clinical data during AN treatment may require different criteria. Methods: We investigated, using patient records, whether young men and young women with AN differed in terms of early treatment response (defined as weight change and variability within the first 14 days) and whether early treatment responses predicted treatment outcomes similarly across genders. Results: Weight changes predicted patient discharge weight across all gender groups. Weight variability predicted higher disordered eating psychopathology and higher body image insecurities at discharge. Gender differences emerged only for weight gain, which was more pronounced for young men, and gender modulated the effects of weight gain and variability on general psychopathology outcomes. Conclusions: The present findings suggest that early weight changes and weight variability are similarly important predictors of AN treatment outcomes in adolescents but also hint at possible gender differences in terms of the link between weight change and, respectively, variability on general psychopathology.}},
  author       = {{Halbeisen, Georg and Braks, Karsten and Huber, Thomas J. and Paslakis, Georgios}},
  booktitle    = {{Journal of Clinical Medicine}},
  issn         = {{2077-0383}},
  keywords     = {{eating disorders, anorexia nervosa, bulimia nervosa, binge-eating disorder : adolescents, psychotherapyt, reatment outcomes}},
  number       = {{11}},
  publisher    = {{MDPI }},
  title        = {{{Exploring Gender Differences in Early Weight Change and Variability in Adolescents with Anorexia Nervosa during Inpatient Treatment}}},
  doi          = {{10.3390/jcm13113255}},
  volume       = {{13}},
  year         = {{2024}},
}

@misc{13576,
  abstract     = {{Background
Many young women are dissatisfied with their bodies. This study investigated the effect on current body dissatisfaction levels of a newly developed evaluative conditioning procedure that paired self-similar and self-dissimilar images of bodies with positive and neutral affective images, respectively. We hypothesized that learning the contingency that self-similar bodies predict positive affectivity is one process that could aid in explaining how these procedures function.
Methods
Adult women without disordered eating pathology participated in an online experiment with random assignment to an intervention or a control condition. All participants initially rated body images in self-similarity and were subsequently asked to categorize positive and neutral images by valence as quickly and accurately as possible. In the intervention condition, self-similar bodies systematically preceded positive images, and self-dissimilar images preceded neutral images, creating a similar body → positive contingency. Pairings in the control condition were unsystematic such that no contingency was present. We measured categorization latencies and accuracies to infer contingency learning as well as current body dissatisfaction immediately before and after exposure to the pairings. All participants further completed measures of trait body image concerns and disordered eating psychopathology at baseline, which we examined as moderators of an expected relation between condition assignment, contingency learning, and body dissatisfaction improvements.
Results
We analyzed data from N = 173 women fulfilling the inclusion criteria. Moderated mediation analyses showed that assignment to the intervention (vs. control) condition predicted increased similar body → positive contingency learning, which in turn predicted improved body dissatisfaction post-intervention, but only among women with higher pre-existing trait body image concerns or disordered eating levels.
Conclusions
The findings point toward the relevancy of further exploring the utility of pairing procedures. Similar body → positive contingency learning predicted improved body dissatisfaction in individuals with normatively high body image concerns, which suggests pairing procedures could help inform future research on reducing body dissatisfaction.}},
  author       = {{Dumstorf, Katharina and Halbeisen, Georg and Paslakis, Georgios}},
  booktitle    = {{Journal of Eating Disorders}},
  issn         = {{2050-2974}},
  keywords     = {{Evaluative conditioning, Body image, Eating disorders, Contingency learning, Psychotherapy, Pairing procedures}},
  number       = {{1}},
  publisher    = {{BioMed Central}},
  title        = {{{How evaluative pairings improve body dissatisfaction in adult women: evidence from a randomized-controlled online study}}},
  doi          = {{10.1186/s40337-024-00975-4}},
  volume       = {{12}},
  year         = {{2024}},
}

@misc{13577,
  abstract     = {{Background
Individuals with borderline personality disorder (BPD) frequently alter between idealizing and devaluing other persons, which has been linked to an increased tendency to update self-relevant beliefs and impressions. We hypothesized that increased impression updating could stem from reduced attitude contextualization, i.e., a process in which impression-disconfirming information is linked to contextual cues.
Methods
Individuals diagnosed with BPD and controls (recruited online, with unknown diagnostic status) completed an impression formation paradigm. They first learned about the positive or negative behaviors of others in one Context A (e.g., Person 1 is helpful), followed by learning about behaviors of the opposite valence in a second Context B (Person 1 is rude). We also manipulated between participants whether the observed behaviors were directed toward the study participants (self-relevant) or, more generally, at other people (other-relevant). The contexts were marked by differently-colored backgrounds (e.g., yellow vs. blue), to avoid influences of prior knowledge or experiences. After exposure to information in both contexts, participants rated their impressions of the persons in Context A, Context B, and, crucially, a previously unknown Context C (white background). We examined whether the initial or an updated impression (re-)emerged in Context C.
Results
Initial impressions remained stable and dominated the ratings of controls across contexts A, B, and C for both self-relevant and other-relevant behaviors, consistent with contextualizing impression-disconfirming information. As expected, however, individuals with BPD only showed updated impression ratings in Context C for self-relevant behaviors, consistent with the assumed reduced tendency to contextualize impression-disconfirming self-relevant information. Further exploratory analyses suggest that more severe BPD symptoms predicted more pronounced impression updating in the self-relevant condition.
Conclusions
The findings help to illuminate the mechanisms underlying interpersonal problems in individuals with BPD. People with BPD are not just more inclined to discard positive first impressions but to re-evaluate disliked others when they behave positively, contributing to the volatility of interactions with others. Contextualization has known and modifiable antecedents, and the study may thus provide potential targets for therapeutic intervention. Future studies will need to replicate the findings with specified controls.}},
  author       = {{Konegen, Kevin and Halbeisen, Georg and Paslakis, Georgios}},
  booktitle    = {{Borderline Personality Disorder and Emotion Dysregulation}},
  issn         = {{2051-6673}},
  keywords     = {{Borderline personality disorder, Interpersonal problems, Social cognition, Belief updating, Renewal, Impression formation, Attitudes, Psychotherapy}},
  number       = {{1}},
  publisher    = {{BioMed Central}},
  title        = {{{A second chance for first impressions: evidence for altered impression updating in borderline personality disorder}}},
  doi          = {{10.1186/s40479-024-00259-y}},
  volume       = {{11}},
  year         = {{2024}},
}

@misc{13585,
  abstract     = {{Background: Eating disorders are seen mainly as a problem affecting women, not just by the public at large, but also in specialized circles. Although it is true that more women than men suffer from all types of eating disorder, pertinent reviews have clearly shown that they do indeed occur in men, and that the available evidence on the matter is limited. The stigmatization of men with eating disorders makes it harder for these men, and for the relevant professionals, to recognize the symptoms and to seek or provide help.

Methods: This review is based on publications retrieved by a selective search in PubMed on the epidemiological, diagnostic, clinical, and therapeutic aspects of eating disorders in men.

Results: Current estimated lifetime prevalences in men are 0.2% for anorexia nervosa, 0.6% for bulimia nervosa, and 1% for binge-eating disorder; the corresponding figures for women are 1.4%, 1.9%, and 2.8%. Men and women may display different manifestations. Women are thought to be mainly seeking a slim figure and weight reduction; men, a muscular build. The established German-language screening and diagnostic tools, however, do not cover the types of symptoms that are more common in men. Little is known about whether treatment yields comparable results in men and women.

Conclusion: It is important to combat the stigmatization of men with eating disorders and to remove the obstacles to their appropriate diagnosis and treatment. The current methods of screening and diagnosis need to be adapted to take account of the special aspects of abnormal eating behavior in men. It remains unclear whether and how the disorder-specific treatment of these conditions in men should differ from their treatment in women.}},
  author       = {{Halbeisen, Georg and Laskowski, N and Brandt, G and Waschescio, U and Paslakis, G}},
  booktitle    = {{Deutsches Ärzteblatt International}},
  issn         = {{1866-0452}},
  number       = {{3}},
  pages        = {{86--91}},
  publisher    = {{Deutsches Ärzteblatt International}},
  title        = {{{Eating Disorders in Men : An Underestimated Problem, an Unseen Need}}},
  doi          = {{10.3238/arztebl.m2023.0246}},
  volume       = {{121}},
  year         = {{2024}},
}

@misc{13616,
  abstract     = {{Objective
Body dissatisfaction is an important risk factor for developing eating disorders. This study investigated whether pairing images of normatively “healthy” weight bodies of women with positive stimuli, and images of bodies outside the healthy range (e.g., underweight) with neutral stimuli, could improve body dissatisfaction.
Methods
We compared behavioral and rating data from 121 adult women who participated in an online study and were randomly assigned to an intervention condition (in which healthy body mass predicted positive stimuli) or a control condition (with no contingency between body mass and stimulus valence).
Results
Behavioral data showed that women in the intervention condition, compared to the control condition, learned to associate healthy bodies with positive valence. Having learned to associate healthy bodies with positive valence, in turn, predicted reductions in body dissatisfaction. The intervention and control conditions were not directly associated with changes in body dissatisfaction.
Conclusion
Learning to associate healthy bodies with any positive stimuli could be a relevant mechanism for understanding and predicting improvements in women's body dissatisfaction. Further research is required regarding the impact of contingency learning on the evaluation of other bodies, and the selection of other bodies for body-related social comparison processes.}},
  author       = {{Tullius, Elena M. and Halbeisen, Georg and Paslakis, Georgios}},
  booktitle    = {{Journal of Psychiatric Research}},
  issn         = {{1879-1379 }},
  keywords     = {{Evaluative conditioning, Body image, Eating disorders, Contingency learning, Psychotherapy}},
  pages        = {{340--348}},
  publisher    = {{Elsevier BV}},
  title        = {{{Can evaluative pairings of others’ bodies improve body dissatisfaction indirectly? A randomized-controlled online study with adult women}}},
  doi          = {{10.1016/j.jpsychires.2024.11.012}},
  volume       = {{180}},
  year         = {{2024}},
}

@misc{13617,
  abstract     = {{Early weight gain is a primary goal in the treatment of anorexia nervosa (AN) and associated with more favorable discharge weights and clinical outcomes. Activity urges, that is, a motivational state to engage in activity, have been suspected to delay early weight gain, but their prognostic role remains barely explored. Here, we investigated whether acute (state‐like) activity urges at treatment onset would predict within‐person weight gain in patients with AN during the initial 2 weeks of inpatient treatment. Adults with AN from an inpatient unit (<jats:italic>N</jats:italic> = 53) completed an activity urges measure at treatment onset, and weight changes were monitored for the duration of their treatment. Regression analyses, controlling for admission body mass index and other patient variables (i.e., patient age and AN subtype), found that higher state activity urges were associated with lower initial weight gain. Mediation analyses showed that differences in early weight changes further linked higher activity urges at admission to lower discharge weights. An activity urge cutoff value of 2.76 for distinguishing between cases with optimal and suboptimal initial weight gain is proposed. We discuss potential mechanisms of the link between activity urges and early weight gain and the implications of activity urges as a prognostic factor for improving weight restoration during AN treatment.}},
  author       = {{Halbeisen, Georg and Amin, Lina and Braks, Karsten and Huber, Thomas J. and Paslakis, Georgios}},
  booktitle    = {{International Journal of Eating Disorders}},
  issn         = {{0276-3478}},
  keywords     = {{anorexia nervosa, inpatient treatment, physical activity, psychotherapy, restlessness, urge for movement}},
  number       = {{12}},
  pages        = {{2452--2460}},
  publisher    = {{Wiley}},
  title        = {{{Acute Activity Urges Predict Lower Early Weight Gain During Inpatient Treatment for Anorexia Nervosa}}},
  doi          = {{10.1002/eat.24305}},
  volume       = {{57}},
  year         = {{2024}},
}

@misc{13618,
  abstract     = {{Food addiction (FA) could be a potential prognostic factor of weight loss intervention outcomes. This systematic review with meta‐analysis aimed to (1) estimate this prognostic effect of FA diagnosis and symptom count in individuals with overweight or obesity and (2) explore potential sources of heterogeneity based on properties of the weight loss intervention, study, and sample (e.g., age, gender, ethnicity). We searched PubMed, PsycINFO, and Web of Science for studies reporting on associations between pre‐intervention FA (assessed with the Yale Food Addiction Scale) and weight outcomes after weight loss intervention in individuals with overweight or obesity without a medically diagnosed eating disorder. Twenty‐five studies met inclusion criteria, including 4904 individuals (71% women, <jats:italic>M</jats:italic><jats:sub>age</jats:sub> = 41 years, BMI = 40.82 kg/m<jats:sup>2</jats:sup>), <jats:italic>k</jats:italic> = 18 correlations of weight loss with FA symptom count, and <jats:italic>k</jats:italic> = 21 mean differences between FA diagnosis groups. Pooled estimates of random‐effects meta‐analyses found limited support for a detrimental effect of FA symptom count and diagnosis on weight loss intervention outcomes. Negative associations with FA increased for behavioral weight loss interventions and among more ethnically diverse samples. More research on the interaction of FA with pre‐existing mental health problems and environmental factors is needed.}},
  author       = {{Halbeisen, Georg and Pahlenkemper, Marie and Sabel, Luisa and Richardson, Candice and Agüera, Zaida and Fernandez‐Aranda, Fernando and Paslakis, Georgios}},
  booktitle    = {{Obesity reviews : an official journal of the International Association for the Study of Obesity }},
  issn         = {{1467-789X}},
  keywords     = {{bariatric surgery, diverse populations, food addiction, gender differences, obesity, psychotherapy, weight loss}},
  number       = {{2}},
  publisher    = {{Wiley}},
  title        = {{{The prognostic role of food addiction for weight loss treatment outcomes in individuals with overweight and obesity: A systematic review and meta‐analysis}}},
  doi          = {{10.1111/obr.13851}},
  volume       = {{26}},
  year         = {{2024}},
}

@misc{13619,
  abstract     = {{Objective
Eating disorders (EDs) increasingly emerge as a health risk in men, but there is concern that men's symptoms go unnoticed due to stereotypical perceptions and gender-related differences in symptom presentation. Novel assessments focused particularly on attitudes and behaviours towards increasing muscle size and definition. Using network analysis, this study aimed to corroborate and extend previous findings on disordered eating presentation in men by examining the role of muscularity concerns among an extended range of disordered eating symptoms.
Method
N = 294 adult men (18 years or older) completed muscularity-related and disordered eating assessments, among which we included assessments for orthorexic eating and Avoidant/Restrictive Food Intake Disorder for the first time. We selected symptoms empirically, estimated a regularised network, identified symptom communities, evaluated network loadings and bridge centrality estimates, and compared network structures between different groups of participants.
Results
We identified five symptom communities related to muscularity-related concerns, features of core ED psychopathology, and selective eating. Symptoms regarding ruminating about healthy eating, guilt for unhealthy eating, weight overvaluation, concerns about muscularity, and selective eating emerged as highly central.
Discussion
The results largely corroborate previous observations but suggest that muscle-building behaviours are part of a broader cluster of male body shaping and rule-based dieting behaviours.
}},
  author       = {{Eschrich, R. Leopold and Halbeisen, Georg and Steins‐Loeber, Sabine and Timmesfeld, Nina and Paslakis, Georgios}},
  booktitle    = {{  European eating disorders review : the professional journal of the Eating Disorders Association}},
  issn         = {{1099-0968}},
  keywords     = {{drive for muscularity, eating disorders, men, psychotherapy, thinness ideal}},
  number       = {{1}},
  pages        = {{80--94}},
  publisher    = {{Wiley}},
  title        = {{{Investigating the structure of disordered eating symptoms in adult men: A network analysis}}},
  doi          = {{10.1002/erv.3131}},
  volume       = {{33}},
  year         = {{2024}},
}