@misc{12924, author = {{Oberschelp, Loreen}}, pages = {{23}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Welchen Einfluss hat die Kameraarbeit im Dokumentarfilm auf die Balance zwischen authentischer Beobachtung und ästhetischer Inszenierung?}}}, year = {{2025}}, } @misc{12927, author = {{Hackel, Martin}}, location = {{Brisbane (Australien)}}, title = {{{EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE BENDING PROPERTIES OF OIL PALM BASED CROSS LAMINATED TIMBER}}}, doi = {{https://doi.org/10.52202/080513-0263}}, year = {{2025}}, } @misc{12928, author = {{Wimmelmeier, Maite}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Nutzermotivation durch Design und Gamification: Entwicklung einer Mitarbeiter-App für Beckhoff Automation GmbH & Co. KG}}}, year = {{2025}}, } @misc{12930, author = {{Mey, Gian Luca}}, pages = {{90}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Vom Fernsehen bis zum Streaming - Die Entwicklung des Home-Entertainments und die Rolle der Konsument*innen }}}, year = {{2025}}, } @inbook{12935, abstract = {{Als Antwort auf den zunehmenden Fachkräftemangel hat sich der Exzellenzbegriff in der beruflichen Bildung etabliert. Doch was ist exzellente berufliche Bildung und welche Bedingungen müssen gegeben sein, damit berufliche Bildung exzellent wird? Diese Fragestellungen sind ein zentraler Bestandteil des InnoVET-Projekts Bildungsbrücken OWL, welches exzellente berufliche Bildung in der Region Ostwestfalen-Lippe (OWL) fokussiert. Bisher liegen für die Region nur wenige Erkenntnisse zu den Bedingungen exzellenter beruflicher Bildung vor. Um sich den Bedingungen zu nähern, sind im Laufe des Projektes gemeinsam mit der Berufsbildungspraxis auf verschiedenen Wegen Erkenntnisse gewonnen worden, die als sogenannte Praxiseinsichten Einblick in die Praxis des beruflichen Bildungsökosystems der Region ermöglichen. Die Projekterkenntnisse werden mit Bildungsakteuren in der Region OWL sowie überregional diskutiert und diesen zum Transfer zur Verfügung gestellt. Damit fließen Erkenntnisse und Expertise aus der Praxis direkt in die regionale Berufsbildungsforschung und Forschungsergebnisse werden mit den handelnden Personen diskutiert. In diesem Beitrag werden ausgehend von dem Exzellenzdiskurs in der beruflichen Bildung ein Einblick in die Zielstellungen des InnoVET-Projekts Bildungsbrücken OWL gegeben, das explorative, praxisorientierte Vorgehen sowie die zentralen Erkenntnisse dargestellt und Empfehlungen für ein exzellentes Bedingungsgefüge beruflicher Bildung in der Region OWL abgeleitet. Im Fokus stehen dabei die Erkenntnisse von drei Leitfadeninterviews, die mit Expertinnen und Experten der Bildungspraxis geführt wurden.}}, author = {{Meyer, Kirsten and Schneider, Birgit and Claes, Svenja}}, booktitle = {{Berufsbildungsforschung. Rezeption - Translation - Transfer}}, editor = {{Rödel, Bodo and Ertl, Hubert and Liebscher, Sandra}}, isbn = {{978-3-8474-2823-7}}, keywords = {{Bildungsbrücken OWL, Berufsbildung, Exzellenz, Bedingungen, Bildungspraxis, Bedingungsgefüge, Leitfadeninterviews, explorative Forschung, OWL}}, pages = {{53--63}}, publisher = {{Barbara Budrich}}, title = {{{Bedingungen für eine exzellente berufliche Bildung - Praxiseinsichten aus der Region Ostwestfalen-Lippe}}}, year = {{2025}}, } @misc{12938, author = {{Schröder, Justin}}, pages = {{156}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Konzeption und Umsetzung eines Corporate Designs für ein IT-Unternehmen zum Aufbau einer visuellen Identität}}}, year = {{2025}}, } @misc{12981, abstract = {{The aim of the study was to develop an alternative husbandry system for Japanese quail in a step-by-step procedure. The effects of various floor and nest variants on animal health, eggshell contamination and performance in three housing systems (alternative housing system, AHS; conventional cage system, CCS; floor housing system, FHS) were tested in altogether four laying periods, two of which are described in more detail. The analysis revealed that the plastic grid floor in AHS achieved the poorest results for toe and foot pad hyperkeratosis and foot pad dermatitis. Heavier quail showed more toe pad hyperkeratosis. The claw length was longest in CCS and shortest in FHS. Plumage damage on the head developed sooner and more often in CCS. Heavier quail showed significantly less plumage damage on the head. In general, the plumage condition of quail was better in FHS than in CCS and AHS. For eggshell hygiene, a higher microbial load was found on eggs from FHS, and there were no clear differences between CCS and AHS. The number of second-choice eggs was smallest in CCS and highest in FHS. Particularly the high soiling of eggs that were laid in the litter in FHS stood out. In summary, environmental enrichment had a positive effect on animal health, and FHS achieved the best results. Concerning eggshell hygiene and economic efficiency, the situation is the opposite. A floor material in AHS that suits both foot health and eggshell hygiene was not found, suggesting a need for further research.}}, author = {{Wolf, Lisa and Hohenfeld, Marie-Anna and Rathmann, Lucas and Weinmann, Larissa and Schreiter, Ruben and Schmidt, Paul and Hiereth, Stephanie and Ulrich, Sebastian and Straubinger, Reinhard and Damme, Klaus and Erhard, Michael and Schwarzer, Angela and Hofmann, Philipp and Louton, Helen and Bergmann, Shana}}, booktitle = {{European poultry science : EPS = Archiv für Geflügelkunde}}, issn = {{1612-9199 }}, keywords = {{Alternative housing, Foot pad dermatitis, Animal welfare, Husbandry system, Environmental enrichment}}, number = {{1-2}}, publisher = {{Ulmer}}, title = {{{Impact of various husbandry environments on animal health, eggshell hygiene and performance of Japanese quail layers (Coturnix japonica domestica)}}}, doi = {{10.1016/j.eups.2025.100004}}, volume = {{89}}, year = {{2025}}, } @misc{12991, abstract = {{Introduction: This study examines the perception of presence among students using virtual reality (VR) compared to iPads. The research aimed to provide deeper insights into students' immersive experiences and identify factors influencing perceived presence. Method and results: Using a comparative approach, we show a significant difference between the two groups, with students using VR reporting a heightened sense of immersion. Additionally, participant's previous experience with immersive VR affect the presence significantly, while we report no detectable effects of age and gender. Discussion: These findings contribute to the discussion on innovative teaching methods, supporting the development of more effective and inclusive virtual learning environments.}}, author = {{Austermann, Christine and von Blanckenburg, Florin and von Blanckenburg, Korbinian and Utesch, Till}}, booktitle = {{Frontiers in Education}}, issn = {{2504-284X}}, keywords = {{virtual reality (VR), presence perception, immersion, learning environment, classroom experiment}}, publisher = {{Frontiers Media}}, title = {{{Exploring the impact of virtual reality on presence: findings from a classroom experiment}}}, doi = {{10.3389/feduc.2025.1560626}}, volume = {{10}}, year = {{2025}}, } @misc{12996, author = {{Pasch, Lilia and Stawinoga, Martin}}, booktitle = {{Zeitschrift für Corporate Governance}}, pages = {{S. 132--140}}, publisher = {{Erich Schmidt Verlag}}, title = {{{Freiwillige Nachhaltigkeitsberichterstattung kapitalmarktferner KMU – Eine Analyse des finalen VSME Standards vor dem Hintergrund der Omnibus-Initiative}}}, volume = {{3}}, year = {{2025}}, } @misc{12997, author = {{Bikliq, Endrit}}, pages = {{111}}, publisher = {{Technische Hochschule OWL}}, title = {{{VON NULL ZUR MARKE: DIE MARKENENTWICKLUNG VON AVISON STUDIOS}}}, year = {{2025}}, } @misc{13000, abstract = {{The following paper examines how gamification principles can expand citizen engagement and participatory processes in the Smart City. Smart city data in particular can be communicated excellently via digital media, regardless of location and time, due to the way it is technologically generated, stored and processed. Consequently, it makes sense to develop separate digital visualizations and tools for citizens, which on the one hand explain relevant relationships in a generally understandable way and on the other hand can reduce the high technological complexity. Especially in recent times, new formats of digital citizen participation have been emerging, some of which are specially developed between actors in urban development and media agencies (i.e. ZebraLog, Decidim, etc.). It is not uncommon that also the latest technologies such as VR glasses, digital twins, etc. come to use. But despite all the technological innovation, one of the basic problems of classic participation remains unsolved: The mix of participating citizens does not reflect the diversity of society even remotely. Socioeconomically disadvantaged groups in particular are not sufficiently reached and hence not included; instead, it tends to be the educated middle class that participates "who may be passionate about certain issues and ignore larger issues" (Ampatzidou et al. 2018; Akers 2022). Moreover, digital platforms require the decision to actively access it online. Against the background of this challenge, the two research teams of the Institute for Design Strategies at the University of Applied Sciences and Arts Ostwestfalen-Lippe are trying to link digital Smart City techniques with the potential of gamification by building and testing very simple and analog tools and methods. In these the linked digital data tends to take place much more in the background while the joy of playing with tangible elements could support citizen engagement and behavioural changes in an easier way. This paper looks at a selection of six applied methods and formats that the team has tested in the public spaces of the medium sized city Detmold, Germany, in a completely or partially analog way in 2024. Topics such as urban planning, data security, mobility, climate change and the Smart City itself were discussed in the formats. The methods tested serve as supplementary elements to online participation and as a further development of classic outreach. Categorizations of gamification elements were reviewed for the analysis. In addition, the methods were classified at different levels of participation according to Cardullo and Kitchin based on Arnstein's work. The paper also takes a critical look at the statement that "Many believe that technological advancements in communication will support a bright new era of political engagement and dialogue" (Green 2020) and that digitalization is therefore the panacea for participation. Furthermore, it has been examined how power imbalances can be countered and a more inviting environment for participatory practices can be achieved.}}, author = {{Licht, Mareile and Albrecht, Kyra and Ashmawy, Mohamed Khaled and Scholten-Reintjes, Marie-Joelle and Nether, Ulrich and Häusler, Axel}}, booktitle = {{REAL CORP 2025: Urban innovation to boldly go where no cities have gone before - medium sized cities and towns as a major arena of global urbanisation : proceedings of 30th International Conference on Urban Planning, Regional Development and Information Society }}, editor = {{Schrenk, Manfred and Popovich, Tatiana and Zeile, Peter and Elisei, Pietro and Beyer, Clemens and Ryser, Judith and Trattnig, Uwe}}, isbn = {{978-3-9504945-4-9}}, issn = {{2521-3938}}, keywords = {{citizen, smart city, gamification, participation, communication}}, location = {{Graz}}, pages = {{553--564}}, publisher = {{CORP - Competence Center of Urban and Regional Planning }}, title = {{{Gamification in the Smart City: Insights from Participation and Communication Processes}}}, doi = {{10.48494/REALCORP2025.6032}}, year = {{2025}}, } @misc{13007, author = {{Miels, Annalena}}, pages = {{39}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Konzeption und Umsetzung eines Kinderbuches zur Unterstützung der Identitätsentwicklung bei Kindern ab fünf Jahren}}}, year = {{2025}}, } @misc{13022, abstract = {{Numerous single-track railway lines are currently disused due to economic factors. These lines could potentially be reactivated by small vehicles that utilise only a single rail, enabling bidirectional operation simultaneously. The MONOCAB is such a compact monorail vehicle, stabilised by a system of control moment gyroscopes (CMGs) and a laterally movable, controllable trim mass. Despite their potential, there is currently a lack of comparative references for MONOCABs in relation to other vehicles. In the context of mechanical design and construction, interdependencies with roll stabilisation occur. Of particular concern are torsional effects, which can significantly impact stability. This study investigates the structural dynamics of monorail vehicles with a focus on the influence of gyroscopes. Gyroscopic systems play a significant role in the behaviour of such vehicles, affecting stability, control and response to external disturbances. Through a comprehensive approach encompassing analytical modelling, numerical simulations, and experimental validation, the interactions between the vehicle's structure and gyroscopic components are explored. The analytical considerations are validated via experimentally derived frequency responses utilising a full-scale monorail vehicle. The results of this study have implications for various fields, such as transportation, robotics and aerospace engineering.}}, author = {{Griese, Martin and Schulte, Thomas}}, booktitle = {{Vehicle system dynamics : international journal of vehicle mechanics and mobility}}, issn = {{1744-5159}}, keywords = {{Vehicle dynamics, rail vehicle, control moment gyroscope, stabilisation control, motion control, stability analysis}}, publisher = {{Taylor & Francis}}, title = {{{Gyroscopic effects in the structural dynamics of monorail vehicles}}}, doi = {{10.1080/00423114.2025.2480820}}, volume = {{63}}, year = {{2025}}, } @misc{13025, abstract = {{Additive manufacturing (AM) of terahertz (THz) components is a cost-effective and efficient method of rapid prototyping. This work discusses the THz characterization of AM-compatible polymers to evaluate their potential use in the fabrication of THz components. The materials under investigation are primarily used in the inkjet 3D-printing (IP) process, and are compared with other AM-compatible materials [1]. The authors analyzed heat resistant AR-H1 material, transparent AR-M2 material and flexible silicon elastomer material. After the THz time domain spectroscopy of these materials, it can be deduced that the materials AR-M2 and AR-H1 can be used in manufacturing of THz components, with the benefit of a superior printing resolution of 50 µm. [1] A. Shrotri, A. K. Mukherjee, S. Lohöfener, A. Springer, O. Stübbe and S. Preu, "Additive manufacturing and characterization of hollow core metal and topas waveguides for Terahertz sensor systems," 2023 48th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), Montreal, QC, Canada, 2023, pp. 1-2, doi: 10.1109/IRMMW-THz57677.2023.10299134.}}, author = {{Shrotri, Abhijeet Narendra and Joshi, Suraj and Rushd Faridi, Fahd and Stübbe, Oliver and Preu, Sascha}}, location = {{Siegen}}, title = {{{THz Characterization of Inkjet Printable Polymers}}}, year = {{2025}}, } @unpublished{13029, abstract = {{Additive manufacturing of optical, electrical and mechanical components is a beneficial approach for rapid prototyping of components and error elimination with short turn around times. However, additively manufactured components usually have rough surfaces which need post-processing, in particular for optical components where the surface roughness must be a small fraction of the wavelength. We demonstrate an innovative and economical approach by dip-coating with the same resin as used for printing, providing high transparency of the 3D-printed optical components and reduced surface roughness with perfect index matching of the coating layer in a simple post processing step. The surface roughness of the 3D-printed optical components drops to 5 nm (arithmetic average) after the dip-coating process. We observed significant performance enhancement after comparing the unprocessed optical components and dip-coated optical components, including achieving optical transparency and shiny surface finish of previously rough surfaces.}}, author = {{Shrotri, Abhijeet Narendra and Preu, Sascha and Stübbe, Oliver}}, booktitle = {{Coatings : open access journal}}, keywords = {{additive manufacturing, post-processing, optics, dip-coating}}, pages = {{10}}, publisher = {{MDPI}}, title = {{{Achieving Transparency and Minimizing Loss of Rough Additively Manufactured Optical Components by a Dip-Coating Surface Finish}}}, doi = {{10.20944/preprints202501.1899.v1}}, year = {{2025}}, } @misc{13033, abstract = {{Atmosphärische Effekte wie Dunst spielen eine entscheidende Rolle für die visuelle Ästhetik im Film, jedoch stellt ihre präzise und konsistente Steuerung bisher eine technische Herausforderung dar, die erhebliche personelle Ressourcen bindet und zu inkonsistenten Ergebnissen führen kann. Im Rahmen dieser Arbeit wurde ein System konzipiert, das kostengünstige handelsübliche Feinstaubsensoren (PMS5003) zur objektiven Messung und Quantifizierung von künstlichem Dunst einsetzt. Das System nutzt mehrere drahtlose Sensormodule zur räumlichen Erfassung der Dunstverteilung und steuert einen Hazer über das DMX-Protokoll. Eine zentrale Herausforderung stellte die systembedingte Reaktionszeit der Sensoren von 30-60 Sekunden dar, die durch den Einsatz linearer Regression für eine vorausschauende Steuerung kompensiert wurde. Experimentelle Untersuchungen bestätigten die Fähigkeit des Systems, eine konstante und reproduzierbare Dunstdichte innerhalb eines definierten Zielbereichs für über 50 Minuten zuverlässig aufrechtzuerhalten. Die durchschnittliche Reaktionszeit der Sensoren betrug 41,0 Sekunden, was die Notwendigkeit des prädiktiven Regelungsansatzes untermauert. Das System erreicht mit vergleichsweise geringen Materialkosten eine präzise Regulierung der atmosphärischen Effekte über längere Produktionsperioden bei gleichzeitiger Minimierung des personellen Aufwands am Set. Die entwickelte Methodik verbindet technische Aspekte der Sensorik und Regelungstechnik mit praktischen Anforderungen der Filmproduktion und leistet damit einen Beitrag zur Standardisierung atmosphärischer Effekte in der visuellen Mediengestaltung.}}, author = {{Spila, Ollie}}, pages = {{104}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Sensorbasierte Regulierung von Dunsterzeugern für Filmproduktionen}}}, year = {{2025}}, } @misc{13038, abstract = {{Die vorliegende Bachelorarbeit gelangt zu dem Schluss, dass die Integration von Open Science Aspekten wie Open Educational Resources (OER), Open Data und Open Source an Hochschulen für angewandte Wissenschaften (HAWs) in Nordrhein-Westfalen (NRW) signifikante Defizite aufweist. Es mangelt an Zuständigkeiten und Richtlinien, und die vorhandenen Publikationsfonds fördern nicht die untersuchten Open Science Aspekte. Über die Hälfte der HAWs erkennt die Relevanz von OER-Beauftragten an, jedoch fehlen entsprechende Policies. Die Bestellung von Open Data-Beauftragten an 50 % der HAWs in NRW verdeutlicht die Relevanz dieser Funktion. Im Bereich Open Source besteht ein eklatanter Mangel an Beauftragten, Informationen und Policies, wobei die Bedeutung von OA-Repositorien und Forschungsinformationssystemen hervorgehoben werden sollte. Zudem gewinnen technische Anwendungen wie GitLab und Jupyter Notebooks an Bedeutung. Für eine effektive Umsetzung sind nachhaltige Finanzierung, zentrale Koordinationsstellen, Evaluierungsprozesse und transparente Verfahren erforderlich.}}, author = {{Herrmann, Katharina}}, keywords = {{Open educational Resources, Open Source, Open Data, Fachhochschule, Nordrhein-Westfalen, Open Science}}, pages = {{211}}, publisher = {{Hochschule Hannover}}, title = {{{Best Practice für Open Educational Resources, Open Source und Open Data an Hochschulen der angewandten Wissenschaften in Nordrhein-Westfalen}}}, doi = {{https://doi.org/10.25968/opus-3632}}, year = {{2025}}, } @phdthesis{13056, abstract = {{This study, entitled “Housing-related open spaces as a health resource - requirements and design recommendations for health-promoting open space development. Using the example of cooperative housing”, examines how open spaces in housing cooperatives must be designed in order to offer a high quality of residence. In this context, it is examined whether the quality of residence promotes a more intensive use of the housing-related open spaces and thus increases the positive effects on the health of the residents. Against this background, the work is divided into three main parts: In the first part, the scientific foundation is laid, whereby the research interest and methodological approaches are presented in the form of a multi-level mix of methods. Central terms such as urban nature, open space, urban ecosystem services, well-being, stress, recreation and health are defined and discussed in the context of the research questions. The second part is dedicated to the conceptual framework and an in-depth theoretical examination of the role of urban open spaces in maintaining and promoting the health of city dwellers. By incorporating theoretical and empirical studies, it is shown that green urban open spaces have demonstrably positive effects on well-being and health. This study closes a research gap in this respect, as it focuses on qualitative factors of open spaces close to residential areas, which have received less attention in research to date. In addition, the contextualization addresses life in urban areas and highlights the importance of housing cooperatives for the development and maintenance of open spaces. It becomes clear that housing cooperatives play a central role in open space development as long-term property owners, as their open spaces are not only of aesthetic importance, but also of social and health significance. Therefore, the work deals with the design and functional requirements for housing-related open spaces, focusing on the needs of the residents and their use. The third part serves the application-oriented implementation. Here, 16 open spaces of seven housing cooperatives are analysed using the mix of methods developed for this work, while the residents of 2,719 households were interviewed about their usage behaviour and needs. The data obtained is used to develop concrete design and maintenance criteria that can be used as guidelines for the sustainable development of housing-related open spaces. One focus is on practicable, cost-extensive recommendations for action that take into account both the needs of residents and the climatic challenges, particularly in the context of redensification, energy-efficient refurbishment and the redesign of open spaces. Finally, the recommendations for action are transferred to other neighbourhoods and evaluated on the basis of student designs. The work concludes with extended recommendations for strategic and planning implementation, a summary of the findings and a critical reflection on the results and methods used.}}, author = {{Winking, Lars}}, pages = {{447}}, publisher = {{Technische Universität Darmstadt - TU Prints}}, title = {{{Wohnungsbezogene Freiräume als Gesundheitsressource – Anforderungen und Gestaltungsempfehlungen für eine gesundheitsfördernde Freiraumentwicklung ; Am Beispiel des genossenschaftlichen Wohnungsbaus}}}, doi = {{10.26083/tuprints-00029491}}, year = {{2025}}, } @inbook{13062, author = {{Baetge, Jörg and Kümmel, Jens and Büngeler, Clarissa}}, booktitle = {{Bilanzrecht. Kommentar zum Handelsrecht mit Steuerrecht und den Regelungen des IASB}}, editor = {{Baetge, Jörg and Kirsch, Hans-Jürgen and Thiele, Stefan}}, isbn = {{978-3-08-350700-0}}, pages = {{1 -- 61 (Rz. 701--878)}}, publisher = {{Stollfuß}}, title = {{{Internationale Harmonisierung der Rechnungslegung}}}, year = {{2025}}, } @misc{13068, author = {{Trsek, Henning and Lohweg, Volker}}, pages = {{228}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Institut für industrielle Informationstechnik / Institute Industrial IT : Jahresbericht 2023 - 2024}}}, doi = {{10.25644/5pc4-kb09}}, volume = {{2023/2024}}, year = {{2025}}, } @misc{13073, author = {{Schlagkamp, Vincent}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{KI im Filmton - Intelligente Mikrofone und deren Anwendungsbereich }}}, year = {{2025}}, } @misc{13075, abstract = {{„Ward 13: Escape the Fear“ ist ein immersives VR-Horrorspiel, in dem der Spieler einen investigativen Journalisten spielt der in einem verlassenen Sanatorium erwacht. In den düsteren Gängen der Station 13 lauert eine übernatürliche Bedrohung, die durch Angst real wird. Um zu überleben, müssen Rätsel gelöst, Hinweise gefunden und der eigene Verstand bewahrt werden. Mit psychologischem Terror, dynamischer Bedrohung und interaktiver Erzählung bietet das Spiel ein intensives VR-Erlebnis voller Spannung und Dunkelheit.}}, author = {{Wallenstein, Kira}}, pages = {{69}}, publisher = {{Technische Hochschule Ostwestfalen Lippe}}, title = {{{Furcht neu erleben Der Einfluss von VR-Technologien auf die Wahrnehmung von Angst in Horrorspielen}}}, year = {{2025}}, } @misc{13080, author = {{Nolte, Ferry and Richter, Alexander and Guhr, Nadine}}, booktitle = {{MIS quarterly executive }}, issn = {{1540-1979 }}, number = {{3}}, publisher = {{Association for Information Systems (AIS) }}, title = {{{A Three-Layer Model for Successful Shop Floor Digital Transformation}}}, volume = {{24}}, year = {{2025}}, } @misc{13083, abstract = {{Die Lebensmittelindustrie ist in der heutigen Zeit mit vielen Herausforderungen konfrontiert. Aufgrund des Klimawandels sowie durch politische Verhältnisse zunehmend volatilere Weltmärkte sind Ressourcen zunehmend knapper und Qualitätseigenschaften schwankender. Gleichzeitig wächst der Bedarf nach gesunden, sicheren Lebensmittel von hoher Qualität stetig. Die größte Herausforderung besteht darin, nachhaltig produzierte Lebensmittel zu fairen Preisen anzubieten, die dennoch hohe ethische und ökologische Standards erfüllen. Gleichzeitig gilt es, den gestiegenen Anforderungen an Individualisierung und Transparenz gerecht zu werden und die enorme Lebensmittelverschwendung wirksam zu bekämpfen. Unter dem Motto „where food meets IT“ praktizieren die profilbildenden Forschungsinstitute „Institut für industrielle Informationstechnik (inIT)“ und „Institut für Life Science Technologies (ILT.NRW)“ der Technischen Hochschule Ostwestfalen-Lippe den interdisziplinären Schulterschluss, um die Digitalisierung der Lebensmittelindustrie voranzutreiben und zukunftsfähige, innovative Antworten auf die oben genannten Herausforderungen zu geben. Das Managementprojekt der smartFoodTechnologyOWL Partnerschaft hat sich in der Aufbau-phase als Kernelement der operativen Ebene etabliert und wesentlich zum Erfolg des Vorhabens beigetragen. In der Intensivierungsphase sollte das Managementprojekt weiterhin dazu dienen, übergeordnete strategische Ziele zu verfolgen, das operative Geschäft zu lenken und administrativ zu unterstützen. Im Vordergrund standen dabei insbesondere die Ausweitung der Kommunikation und Marketingaktivitäten, der Science-2-Business-Angebote sowie die Um-setzung der Verstetigung. Das übergeordnete Ziel war die langfristige Verstetigung der Partner-schaft mit Ihren Organen und Aktivitäten.}}, author = {{Schneider, Jan and Jantz, Nele}}, publisher = {{Technische Informationsbibliothek}}, title = {{{Abschlussbericht Projekt Management der Partnerschaft smartFoodTechnologyOWL}}}, doi = {{https://doi.org/10.34657/19115}}, year = {{2025}}, } @misc{13084, abstract = {{Thermal preservation is widely used for the stabilization of fruit and vegetable juices. However, this method can potentially impair product quality and it is necessary to categorize and quantify these changes in order to optimize the treatment process. Here, carrot juice was treated with different time temperature combinations selected to achieve equivalent microbiological lethality. Different temperatures were selected - low temperature long time (LTLT) with 90 and 95 °C and high temperature short time (HTST) with 120 and 125 °C. The thermally treated juice exhibited significant differences in physical, chemical and sensory parameters in contrast to untreated juice. HTST treatment had less of a negative effect on the juice. A significant deterioration in odor, appearance and taste was observed after the LTLT treatment compared to an untreated reference juice. The juice exhibited elevated acid taste, a shift in olfactory profile from white to red vegetables and diminished homogeneity. Significant changes in sugar composition, pH, carotenoids and color were also observed during this treatment. The juice that had been treated with LTLT exhibited a higher amount of monosaccharides, a lower pH value, a reduced quantity of carotenoids and a perceptible difference in color in comparison to the untreated and fresh juice. Therefore, it can be concluded that varying temperatures show different effects on juice quality, despite the same microbiological lethal effect. This must be taken into account when designing the pasteurization process.}}, author = {{Katsch, Linda and Weishaupt, Imke and Sokolowsky, Martina and Gibson, Brian R. and Schneider, Jan}}, booktitle = {{European Food Research and Technology}}, issn = {{1438-2385}}, keywords = {{Carrot juice, Sterilization, Carotenoids, Descriptive analysis, PCA, HTST}}, number = {{251}}, pages = {{3649--3668}}, publisher = {{Springer}}, title = {{{Impact of equivalent sterilization processes with different time- temperature combinations on the chemical, physical and sensory properties of carrot juice}}}, doi = {{https://doi.org/10.1007/s00217-025-04860-5}}, year = {{2025}}, } @misc{13094, author = {{Katsch, Linda and Steinmetzler, Arthur and Sokolowsky, Martina and Schneider, Jan}}, location = {{Halle (Saale)}}, title = {{{Haltbarkeitsvoraussage von Orangensaft: Chemische, physikalische und sensorische Effekte während beschleunigter Haltbarkeitstests}}}, doi = {{10.1002/lemi.202559165}}, year = {{2025}}, } @misc{13095, author = {{Rauter, Irina}}, pages = {{107}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Storytelling und Soundgestaltung im Radio-Feature - Analyse und Umsetzung im Rahmen des Features: „Mallorca mein Löwe mein Bär – Geschichten aus dem Bierkönig“}}}, year = {{2025}}, } @misc{13096, author = {{Schöttker, Joelina}}, pages = {{104}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Partyschlager vs. HipHop: Die Darstellung von Musikgenres in deutschen Radio-Features}}}, year = {{2025}}, } @misc{13101, abstract = {{Introduction: In-line sensors, which are crucial for real-time (bio-) process monitoring, can suffer from anomalies. These signal spikes and shifts compromise process control. Due to the dynamic and non-stationary nature of bioprocess signals, addressing these issues requires specialized preprocessing. However, existing anomaly detection methods often fail for real-time applications. Methods: This study addresses a common yet critical issue: developing a robust and easy-to-implement algorithm for real-time anomaly detection and removal for in-line permittivity sensor measurement. Recombinant Pichia pastoris cultivations served as a case study. Trivial approaches, such as moving average filtering, do not adequately capture the complexity of the problem. However, our method provides a structured solution through three consecutive steps: 1) Signal preprocessing to reduce noise and eliminate context dependency; 2) Anomaly detection using threshold-based identification; 3) Validation and removal of identified anomalies. Results and discussion: We demonstrate that our approach effectively detects and removes anomalies by compensating signal shift value, while remaining computationally efficient and practical for real-time use. It achieves an F1-score of 0.79 with a static threshold of 1.06 pF/cm and a double rolling aggregate transformer using window sizes w1 = 1 and w2 = 15. This flexible and scalable algorithm has the potential to bridge a crucial gap in process real-time analytics and control.}}, author = {{Bolmanis, Emils and Uhlendorff, Selina and Pein-Hackelbusch, Miriam and Galvanauskas, Vytautas and Grigs, Oskars}}, booktitle = {{Frontiers in Bioengineering and Biotechnology}}, issn = {{2296-4185}}, keywords = {{in-situ, permittivity, dielectric spectroscopy, signal preprocessing, dynamic threshold, static threshold, anomaly validation, Pichia pastoris}}, publisher = {{Frontiers Media SA}}, title = {{{Anomaly detection and removal strategies for in-line permittivity sensor signal used in bioprocesses}}}, doi = {{10.3389/fbioe.2025.1609369}}, volume = {{13}}, year = {{2025}}, } @misc{13110, author = {{Klepp, Georg Heinrich}}, location = {{Dresden}}, title = {{{KraftwerkLand - Reallabor für grünen Wasserstoff im ländlichen Raum}}}, year = {{2025}}, } @misc{13111, author = {{Klepp, Georg Heinrich}}, location = {{Berlin}}, title = {{{Digitaler Zwilling für Kraftstoffe}}}, year = {{2025}}, } @misc{13112, author = {{Klepp, Georg Heinrich}}, location = {{Frankfurt}}, title = {{{KrafwerkLand - Zukunft der Energieversorgung}}}, year = {{2025}}, } @misc{13113, author = {{Klepp, Georg Heinrich and Filippi, Markus and Friedrichs, Jens}}, location = {{Perugia}}, title = {{{Analysis of S-shaped profiles for tidal turbines}}}, year = {{2025}}, } @misc{13114, author = {{Klepp, Georg Heinrich}}, location = {{Perugia, Italy}}, title = {{{Ignition delay time of ammonia hydrogen mixtures predicted with machine learning}}}, year = {{2025}}, } @misc{13116, author = {{Webelhaus, Juliette}}, pages = {{65}}, publisher = {{Technische Hochschule Ostwestfalen Lippe}}, title = {{{Bild. Botschaft. Beziehung. Die Wirkung authentischer Brandfotografie in der Markenkommunikation.}}}, year = {{2025}}, } @misc{13118, author = {{Stocksiek, Lea}}, pages = {{130}}, publisher = {{Technische Hochschule Ostwestfalen Lippe}}, title = {{{Snap, share, forget - Der Wandel der Reisefotografie im Zeitalter sozialer Medien}}}, year = {{2025}}, } @misc{13120, abstract = {{This paper introduces an approach that leverages large language models (LLMs) to convert detailed descriptions of an Operational Design Domain (ODD) into realistic, executable simulation scenarios for testing autonomous vehicles. The method combines model-based and data-driven techniques to decompose ODDs into three key components: environmental, scenery, and dynamic elements. It then applies prompt engineering to generate ScenarioRunner scripts compatible with CARLA. The model-based component guides the LLM using structured prompts and a “Tree of Thoughts” strategy to outline the scenario, while a data-driven refinement process, drawing inspiration from red teaming, enhances the accuracy and robustness of the generated scripts over time. Experimental results show that while static components, such as weather and road layouts, are well captured, dynamic elements like vehicle and pedestrian behavior require further refinement. Overall, this approach not only reduces the manual effort involved in creating simulation scenarios but also identifies key challenges and opportunities for advancing safer and more adaptive autonomous driving systems.}}, author = {{Danso, Aaron Agyapong and Büker, Ulrich}}, booktitle = {{Electronics}}, issn = {{2079-9292 }}, keywords = {{large language models, generation, Operational Design Domain, autonomous vehicles, simulation, CARLA, ScenarioRunner, prompt-engineering, fine-tuning}}, number = {{16}}, pages = {{3177}}, publisher = {{MDPI}}, title = {{{Automated Generation of Test Scenarios for Autonomous Driving Using LLMs}}}, doi = {{10.3390/electronics14163177}}, volume = {{14}}, year = {{2025}}, } @misc{13122, author = {{Uhlendorff, Selina and Bolmanis, Emils and Pein-Hackelbusch, Miriam and Galvanauskas, Vytautas and Grigs, Oskars}}, location = {{Lissabon}}, title = {{{Analysis of Anomaly Detection Techniques for In-line Permittivity Sensors in Bioprocesses}}}, year = {{2025}}, } @misc{13124, abstract = {{Der Film basiert auf Interviews mit zwei jungen Frauen mit Migrationshintergrund, die über ihre Erfahrungen in ihren Mittzwanzigern sprechen. Diese realen Stimmen bilden die Grundlage für die narrative und visuelle Umsetzung. Dabei wird untersucht, wie die Quarterlife Crisis speziell in dieser Gruppe wahrgenommen und erlebt wird, welche Rolle kulturelle und familiäre Erwartungen spielen und welche Strategien zur Bewältigung gefunden werden.}}, author = {{Hussain, Romana}}, keywords = {{Animation, Mixed Media, Claymation, Stop-Motion, Illustration, After Effects, Quarterlife Crisis, Migrationshintergrund}}, pages = {{103}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Tanz – ein Film über die Quarterlife Crisis und Herausforderungen der Identitätssuche von Frauen mit Migrationshintergrund}}}, year = {{2025}}, } @misc{13129, author = {{Madeja, Victoria}}, pages = {{62}}, publisher = {{Technische Hochschule Ostwestfalen Lippe}}, title = {{{Aufbau einer erfolgreichen Selbstständigkeit in der Hochzeitspapeterie auf der Verkaufsplattform Etsy}}}, year = {{2025}}, } @book{13133, author = {{Staff, Jörg and Vetter, Andreas}}, isbn = {{978-3-7667-2774-9}}, keywords = {{Best Workspaces, Preisträger, Geschichte 2025}}, pages = {{384}}, publisher = {{Callwey}}, title = {{{Best Workspaces}}}, year = {{2025}}, } @misc{13139, author = {{Koch, Bianca}}, pages = {{83}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Die Darstellung von Depression im medialen Kontext zwischen Stigma und Enttabuisierung}}}, year = {{2025}}, } @misc{13143, author = {{Halawi, Ali}}, pages = {{37}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Die animierte Biografie meiner Mutter: Flucht, Familie und Erinnerung in bewegten Bildern}}}, year = {{2025}}, } @misc{13146, abstract = {{Die vorliegende Arbeit befasst sich mit der Entwicklung von Bedienungsanleitungen und dem heutzutage gewählten Medium, mit dem neue Bedienungen bevorzugt erfasst wer-den. Anhand einer Umfrage mit einem integrierten Experiment mit 10 Proband:innen wurden die Ergebnisse mit Datensätzen aus der Forschung verglichen und in den Kontext verschiedener Forschungstheorien gesetzt. Abgefragt wurde der allgemeine Medienkon-sum im Vergleich mit dem Konsum von Anleitungen in den drei Kategorien, Text, Video und Grafik. Auch die Erfahrung mit dem Nutzen von Bedienungsanleitungen und Y-ouTube-Tutorials wurde erfasst. Im Fazit kommt die Arbeit dazu, dass trotz gleichem Zeitaufwand, YouTube-Tutorials der klassischen Bedienungsanleitung stark bevorzugt und diese auch als hilfreicher wahrgenommen werden. Dies liegt an der visuellen Stimu-lierung des Videoformats, das ein größeres Spektrum von Lerntypen anspricht. Außer-dem ist die Plattform YouTube niederschwelliger zugänglich. }}, author = {{Clausen, Meike}}, keywords = {{Tutorial, Bedienungsanleitung, YouTube, Erklärvideos, Anleitung}}, pages = {{43}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Bedienungsanleitung 2.0 vom Beipackzettel zum YouTube Tutorial.}}}, year = {{2025}}, } @misc{13148, abstract = {{Die vorliegende Arbeit untersucht auf Basis des eigenen Bachelorfilms FATIMA (2025) die Bildgestaltung in 2D-animierten Kriegsfilmen mit Schwerpunkt auf den Hintergrundillustrationen. Mittels der Kombination aus kunstwissenschaftlicher Bildanalyse und einer filmanalytischen Perspektive wird eine qualitative Untersuchung durchgeführt, die Farbgebung, Lichtführung, Komposition, Kameraperspektiven und Handlungsspielorte in FATIMA und den Vergleichsfilmen Flee (2021), The Breadwinner (2017) und Waltz with Bashir (2008) gegenüberstellt. Dabei soll erörtert werden, wie diese gestalterischen Mittel Angst, Bedrohung und fragile Sicherheit vermitteln und welchen Beitrag sie zum narrativen Verständnis leisten. Die Analyse zeigt, dass visuelle Gestaltung kein dekoratives Beiwerk, sondern ein aktives erzählerisches Mittel ist: Wiederkehrende Handlungsspielorte, gezielte Farbdramaturgie, Perspektivwahl sowie Lichtsetzung strukturieren Zeit und Handlung und leiten emotionale Rezeption. Für die Praxis wird deutlich, dass sorgfältige Vorarbeit in Form von Color Scripts, einem durchdachten 2D-3D-Workflow sowie konsequenter Perspektiv- und Lichtplanung nicht nur Klarheit und Effizienz steigert, sondern auch die beabsichtigte Wirkung des Films nachhaltig verstärkt.}}, author = {{v. Kloeden, Kristina}}, keywords = {{Hintergrundillustration, 2D-Animation, Bildanalyse, visuelle Analyse, Kriegsnarration, Machtinszenierung, emotionale Wirkung}}, pages = {{109}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Hintergrundillustrationen in FATIMA – Bildgestaltung im Zentrum visueller Narration}}}, year = {{2025}}, } @misc{13156, author = {{Steinkuhl, Anika}}, location = {{Kiel}}, title = {{{Strukturelle Hemmnisse für die Nutzung des digitalen Gebäuderessourcenpasses}}}, year = {{2025}}, } @misc{13157, author = {{Worring, Calvin}}, pages = {{37}}, publisher = {{Technische Hochschule Ostwestfalen Lippe}}, title = {{{Mein DIY Soundsystem in der Club und Musikkultur}}}, year = {{2025}}, } @misc{13160, author = {{Hausmann, Rabea}}, pages = {{60}}, publisher = {{Technische Hochschule Ostwestfalen Lippe}}, title = {{{„Streetfotografie sehen, fühlen & verstehen - Eine experimentelle Annäherung an die emotionale Wirkung dokumentarischer Bilder“}}}, year = {{2025}}, } @misc{13163, author = {{Struck, Susanne}}, location = {{Bad Sassendorf}}, title = {{{Funktionalität von Proteinen in der Verarbeitung und Anwendung in Lebensmitteln – Besonderheiten von Hanfproteinen}}}, year = {{2025}}, } @misc{13165, abstract = {{It will be examined, on the basis of three guiding questions (LF1–LF3), whether and to what extent storytelling components (storytelling principles, elements, techniques) are related to the quality and success levels of selected true crime-podcast formats. The three selected formats are each represented by two individual episodes. Parallels and differences in the composition of narrative devices across the three true crime-podcast formats will be identified. The individual episodes are analyzed in tabular form, using the pre-structured analytical scheme that lists the storytelling components in three subcategories. The theoretical discussion is conducted by means of a literature review of the current state of research and its influence on answering the guiding questions. Before outlining the analytical framework, the study introduces podcasts as an audio format, the true-crime podcast genre, and storytelling and its significance for true-crime podcasts. The aim of this bachelor’s thesis is to determine the extent to which storytelling components in different true crime-podcast formats correlate with the format’s success, operationalized via quality criteria, so that the findings can be used to evaluate existing formats and/or be incorporated into further studies. It is expected that the success and quality of different true crime narrative formats in podcast form are closely tied to a coherent blend of storytelling principles, elements, and techniques, and that this relationship can be captured through the intended analysis. The results obtained may then serve as a starting point for further research questions and studies. Keywords: Audio podcast format, True Crime Genre, Storytelling components}}, author = {{Bussmann, Lale}}, keywords = {{Audio-Podcastformat, True Crime-Genre, Storytellingkomponenten, Storytelling}}, pages = {{176}}, publisher = {{Technische Hochschule Ostwestfalen Lippe}}, title = {{{Storytelling in True Crime-Podcasts}}}, year = {{2025}}, } @misc{13171, author = {{Lammersen, Maximilian and Rasche, Rainer}}, location = {{Höxter}}, title = {{{NachLadBaR - Nachhaltige Ladeelektronik: Digitaler Produktpass für Reuse und Recycling}}}, year = {{2025}}, } @misc{13177, author = {{Goldmann, Oliver}}, pages = {{44}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Die Zukunft des filmischen Bühnenbilds - Eine vergleichende Analyse physischer, digitaler und KI-generierter Filmkulissen mit gestalterischer Umsetzung}}}, year = {{2025}}, } @misc{13180, abstract = {{HUMAN 2025 is the 8th workshop of a series for the ACM Hypertext conferences. The HUMAN workshop has a strong focus on the user and brings together user‑centered hypertext with artificial intelligence to build intelligent hypertext systems. The user-centric view on hypertext not only includes user interfaces and interaction, but also discussions about hypertext application domains as well as human-centered AI. Furthermore, the workshop raises the question of how original hypertext ideas (e.g., Doug Engelbart’s “augmenting human intellect” [7] or Jeff Conklin’s “hypertext as a computer-based medium for thinking and communication” [6]) can improve today’s hypertext systems.}}, author = {{Rubart, Jessica and Atzenbeck, Claus}}, booktitle = {{Adjunct Proceedings of the 36th ACM Conference on Hypertext and Social Media (HT Adjunct 2025)}}, editor = {{Zheng, Yong and Boratto, Ludovico}}, location = {{Chicago, USA}}, pages = {{49--50}}, publisher = {{ACM}}, title = {{{Human Factors in Hypertext (HUMAN’25)}}}, doi = {{https://doi.org/10.1145/3720533.3756895}}, year = {{2025}}, } @misc{13184, abstract = {{Diese Arbeit untersucht, welchen Einfluss die Social Media Präsenz von Unternehmen auf die Berufsentscheidung Jugendlicher haben kann, mit besonderem Fokus auf gewerblich-technische Ausbildungsberufe. Ziel war es, herauszufinden, ob und wie soziale Medien als Instrument zur Ansprache und Gewinnung potenzieller Auszubildender genutzt werden können. Dazu wurden quantitative Befragungen mit Schüler:innen der neunten Klasse durchgeführt. Einmal mit, einmal ohne vorherige Videovorführung. Ergänzt wird die empirische Erhebung durch praktische Erfahrungen aus dem Transferprojekt „Azubi Recruiting Social Media 4.0“. In diesem Projekt wurden Social-Media-Videos produziert sowie ein Leitfaden entwickelt, der kleinen und mittleren Unternehmen helfen soll, eigenständig Inhalte für ihre Ausbildungsberufe zu erstellen und zu veröffentlichen. Die Ergebnisse der Untersuchung liefern Erkenntnisse darüber, wie soziale Medien zur beruflichen Orientierung beitragen können und was Unternehmen tun können, um dort wirksam sichtbar zu werden.}}, author = {{Just, Gavin}}, keywords = {{Social Media Azubi Rekrutierung}}, pages = {{89}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Der Einfluss von Sozialen Medien auf die Berufsentscheidung Jugendlicher am Beispiel des Transferprojekts Azubi Recruiting Social Media 4.0}}}, year = {{2025}}, } @misc{13186, abstract = {{In der folgenden Bachelorarbeit wurde die Neuentwicklung des Corporate Designs und des Verpackungsdesigns für den Spieleverlag Prüdispiele umge-setzt. Das Ziel war es, ein einheitliches und wiedererkennbares Erscheinungs-bild zu schaffen, das die Identität des Verlags widerspiegelt und seine Spiele modernisiert. Dazu wurden zunächst theoretische Grundlagen zu den Themen Spiel, Corporate Identity, Corporate Design und Verpackungsdesign erarbeitet und durch eine Konkurrenz- und Ist-Analyse des bestehenden Corporate Designs von Prüdispiele ergänzt. Auf dieser Grundlage entstand ein neues Corporate Design, das aus Logo, Farbgebung und Schriftkonzept sowie wei-teren Gestaltungselementen besteht. Parallel dazu wurde das Verpackungs-design exemplarisch am Spiel Hoch Bau Bum neu entwickelt.}}, author = {{Billen, Mirjam}}, keywords = {{Corporate Design, Verpackungsdesign, CI, CD}}, pages = {{132}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Neuentwicklung von Corporate Design und Verpackungsdesign für den Spieleverlag Prüdispiele}}}, year = {{2025}}, } @misc{13188, author = {{Tiamson, Aimee}}, pages = {{34}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Realitätsnahes Sound Design im Animationsfilm}}}, year = {{2025}}, } @misc{13191, abstract = {{Diese Arbeit unterliegt der CC-Lizenz CC BY-NC-ND 4.0!}}, author = {{Doedt, Vanessa}}, pages = {{147}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Entwicklung eines Corporate Designs für eine vegane Eismarke}}}, year = {{2025}}, } @misc{13193, abstract = {{Wenngleich die Nachhaltigkeitsberichterstattung in den vergangenen Jahren eine erhebliche Bedeutungszunahme erfahren hat, sind zahlreiche Detailaspekte im Zusammenhang mit der Aufstellung, Prüfung und Offenlegung eines Nachhaltigkeitsberichts weiterhin nicht geklärt. Exemplarisch gilt es die Themenstellung hervorzuheben, welche externe Prüfungsinstanz künftig die Angaben des Nachhaltigkeitsberichts verifizieren soll. Hierfür kommen grds. zum einen Vertreter des Berufsstands der WP und zum anderen unabhängige Erbringer von Bestätigungsleistungen - bspw. Umweltgutachter - in Frage. Die Corporate Sustainability Reporting Directive (CSRD) beinhaltet Mitgliedstaatenwahlrechte hinsichtlich der Prüfungsinstanz. Am 10.07.2025 hat das Bundesministerium der Justiz und für Verbraucherschutz (BMJV) einen neuen RefE zur Transformation der CSRD in nationales Recht vorgelegt. Der Gesetzgeber plant die Prüfung des Nachhaltigkeitsberichts als Vorbehaltsaufgabe für die Vertreter des Berufsstands der WP auszugestalten. In diesem Zusammenhang sind 73 Stellungnahmen eingegangen. In rund der Hälfte der Stellungnahmen wird die Prüfungsinstanz im Kontext der Prüfung eines Nachhaltigkeitsberichts thematisiert. Angesichts dieser Resonanz wird im vorliegenden Beitrag zunächst die geplante Ausübung des Mitgliedstaatenwahlrechts seitens des BMJV erörtert und anhand der eingegangenen Stellungnahmen ausgewertet und kritisch gewürdigt.}}, author = {{Stawinoga, Martin}}, booktitle = {{Der Konzern}}, issn = {{1611-2296}}, number = {{9}}, pages = {{349--355}}, publisher = {{Handelsblatt Fachmedien GmbH}}, title = {{{Der Prüfer eines Nachhaltigkeitsberichts – ausschließlich WP oder auch Umweltgutachter und technische Sachverständige? Eine Analyse der zum RefE eines CSRD-Umsetzungsgesetzes eingegangenen Stellungnahmen}}}, year = {{2025}}, } @misc{13195, author = {{Szok, Melanie}}, keywords = {{Illustration, Bilderbuch, kognitive Entwicklung}}, pages = {{95}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Kindgerechte Bildwelten: Die Rolle von Kinderbuchillustrationen bei der Vermittlung komplexer Sachverhalte}}}, year = {{2025}}, } @misc{13198, author = {{Welscher, Josefine}}, pages = {{53}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Inszenierung trifft Authentizität: Wie unterscheiden sich studioinszenierte Food-Fotografien von authentischem Food-Content auf Social Media hinsichtlich ihrer Gestaltung, Zielgruppenansprache und Marketingstrategien?}}}, year = {{2025}}, } @misc{13203, abstract = {{Diese Arbeit untersucht die filmische Darstellung technischer Innovationen am Beispiel des Konzepts Electric Car Express (ECE), eines Zugsystems, das den gleichzeitigen Transport und das Laden von Elektrofahrzeugen während der Fahrt ermöglichen soll. Ziel der Arbeit ist die Entwicklung eines Konzeptfilms, der die Funktionsweise des ECE anschaulich und für ein breites Publikum verständlich visualisiert. Methodisch wird in vier Schritten vorgegangen: Zunächst erfolgt die Definition der darzustellenden Innovation, gefolgt von einer Analyse bestehender Konzeptund Werbefilme technologischer Mobilitätslösungen. Auf Basis der gewonnenen Erkenntnisse wird ein eigener Animationsfilm produziert und anschließend im Hinblick auf Verständlichkeit, Glaubwürdigkeit und Zielgruppenansprache reflektiert. Die Analyse zeigt, dass insbesondere eine reduzierte visuelle Sprache, eine lineare Narration sowie eine ausgewogene Kombination aus technischer Detailgenauigkeit und alltagsnaher Inszenierung maßgeblich zur erfolgreichen Vermittlung beitragen. Der resultierende ECE-Film setzt diese Prinzipien um und verdeutlicht, wie audiovisuelle Medien genutzt werden können, um visionäre Konzepte plausibel darzustellen, Akzeptanz zu fördern und Diskussionen über zukünftige Mobilitätslösungen anzuregen.}}, author = {{Kraus, Leon}}, pages = {{43}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Real und “Realistisch”: Wie vermittelt man animiert realistische Konzepte für potenzielle Innovationen im Technologiebereich so, dass sie verständlich und glaubwürdig wirken?}}}, year = {{2025}}, } @misc{13205, abstract = {{Diese Bachelorarbeit befasst sich mit der iterativen Entwicklung und Optimierung eines interaktiven Tutorials für das asymmetrische Koop-Spiel „Tabletop Tumult“, in dem ein VR-Spieler und ein PC-Spieler zusammenarbeiten, um eine Burg zu verteidigen. Da der Einstieg in Virtual-Reality-Umgebungen für unerfahrene Spieler oft eine Heraus forderung darstellt, bestand die zentrale Problemstellung darin, spezifische Einstiegs hürden im Onboarding-Prozess von „Tabletop Tumult“ zu identifizieren und zu behe ben. Die Arbeit verfolgt einen iterativen Entwicklungsansatz, der auf Playtests und syste matischem Nutzerfeedback basiert. Über drei Zyklen hinweg wurden das Tutorial kon zipiert, implementiert, getestet und basierend auf den gesammelten Daten überarbei tet. Zur Datenerhebung wurden sowohl qualitative Methoden wie Beobachtungen und Interviews als auch quantitative Methoden wie Fragebögen und spielinterne Metriken eingesetzt. Die Ergebnisse der iterativen Entwicklung zeigen eine signifikante Verbesserung der Spielerfahrung. Insbesondere die dritte Tutorial-Version führte zu einer messbaren Steigerung der Spielkompetenz, indem sich der durchschnittliche Highscore im Ver gleich zur Vorversion mehr als verdoppelte (+101 %). Auch die Nutzung relevanter Spielmechaniken durch beide Spielerrollen stieg deutlich an, was auf eine erhöhte Lerneffektivität hinweist. Trotz dieser Erfolge deckte das qualitative Feedback weiter hin Usability-Probleme auf, wie unklare Erklärungen zur Ressourcenverbindung zwi schen den Spielern und Sprachbarrieren bei englischen UI-Texten. Die Arbeit schließt mit der Ableitung von Best Practices für das Onboarding in asymmetrischen VR-Spie len und Implikationen für die weitere Entwicklung von Tabletop Tumult ab.}}, author = {{Happe, Tobit}}, keywords = {{Tutorial, Game Design, Tabletop Tumult}}, pages = {{75}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Interaktive Tutorials in digitalen Spielen: Eine iterative Entwicklung am Beispiel von Tabletop Tumult }}}, year = {{2025}}, } @misc{13207, abstract = {{Der Einsatz von Gamification in Produktionsumgebungen wird zunehmend in Mensch-Technik Systemen (MTS) zur Steigerung von Motivation, Engagement und Produktivität eingesetzt. Jedoch fehlt bisher eine systematische Betrachtung, welche Anforderungen an diese gamifizierten MTS gestellt werden und wie diese zu einer inklusiven Gestaltung beitragen können. Ziel dieses Beitrags ist es, Anforderungen an gamifizierte MTS in Produktionskontexten systematisch aus der Literatur zu identifizieren, zu strukturieren und hinsichtlich ihres Beitrags zur inklusiven Gestaltung zu analysieren. Dazu wurde eine systematische Literaturrecherche (SLR) durchgeführt, auf deren Grundlage dreizehn relevante Publikationen identifiziert wurden. Die Analyse zeigt, dass sich ein Großteil der Anforderungen auf ergonomische und technische Aspekte konzentriert, wohingegen sicherheitsbezogene, organisatorische und leistungsbezogene Anforderungen wenig Berücksichtigung finden. Aspekte einer inklusiven Gestaltung werden bisher implizit in der Literatur adressiert. Zudem bezieht sich die bisherige Literatur zwar auf gamifizierte MTS, die konkreten Anforderungen an z.B. Gamification-Elemente werden jedoch nicht beschrieben. So fehlen z.B. Anforderungen an die Ausgestaltung dieser Elemente, insbesondere unter Berücksichtigung inklusiver Gestaltung.}}, author = {{Mordaschew, Viktoria and Röcker, Carsten}}, booktitle = {{MuC '25: Proceedings of the Mensch und Computer 2025}}, editor = {{Chuang, Lewis and Eibl, Maximilian and Gaedke, Martin }}, isbn = {{979-8-4007-1582-2}}, location = {{Chemnitz}}, pages = {{617 -- 623}}, publisher = {{ACM}}, title = {{{Gamification in Manufacturing: For Everyone? Focus on Requirements from the Literature}}}, doi = {{10.1145/3743049.3748546}}, year = {{2025}}, } @misc{13209, abstract = {{Die Identifikation und Umsetzung von Produktänderungen ist ein wissensintensiver und fehleranfälliger Prozess, dessen Erfolg von der Zuverlässigkeit der beteiligten Entwickler*innen abhängt. Daher präsentiert dieser Beitrag ein konzeptionelles Modell, welches die Zusammenhänge von Einflussfaktoren auf die menschliche Zuverlässigkeit (mZ) beschreibt. Durch eine systematische Literaturrecherche wurden relevante Einflussfaktoren identifiziert und im Arbeitssystemmodell nach Schlick et al. (2018) strukturiert. Das daraus entwickelte konzeptionelle Modell visualisiert die Zusammenhänge von Einflussfaktoren auf die mZ und den Output. Das Modell bildet eine Grundlage für zukünftige empirische Evaluationen, z. B. durch Strukturgleichungsmodelle, und liefert Ansatzpunkte zur Verbesserung der mZ in Produktänderungsprozessen.}}, author = {{Mordaschew, Viktoria and Latos, Benedikt}}, booktitle = {{Arbeit 5.0: Menschzentrierte Innovationen für die Zukunft der Arbeit}}, keywords = {{Produktänderungen, Zuverlässigkeit, Menschlicher Faktor, Arbeitsgestaltung}}, location = {{Aachen}}, pages = {{13--18}}, publisher = {{Gesellschaft für Arbeitswissenschaft e.V.}}, title = {{{Konzeptionelles Modell der Zusammenhänge von Einflussfaktoren auf die Zuverlässigkeit von Entwickler*innen bei Produktänderungen}}}, doi = {{10.61063/FK2025}}, year = {{2025}}, } @misc{13211, author = {{Simonian, Melina}}, pages = {{28}}, publisher = {{Technische Hochschule Ostwestfalen Lippe}}, title = {{{Durch die Blume : Eine fotografische Auseinandersetzung mit der stillen Sprache der Zuneigung im familiären Dialog der Generationen}}}, year = {{2025}}, } @misc{13218, author = {{Uhlstein, Finja}}, keywords = {{Corporate Design, Raumgestaltung, Co-Working-Space, CD, CI, Kreativwirtschaft}}, pages = {{50}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Kreativitätsförderung durch Raumgestaltung und Corporate Design: Konzeption eines Co-Working-Space in der Kreativwirtschaft}}}, year = {{2025}}, } @misc{13221, abstract = {{Bioactive peptides are increasingly employed in cosmetic products and these are generically known as cosmetic peptides. This review aims to provide an update on current information related to commercially available cosmetic peptides, and the in vitro and ex vivo evidence for their potential biological effects. A total of 102 commercially available cosmetic peptides were identified. The majority of these peptides are inspired by molecules already found in the human body, including sequences from extracellular matrix molecules, also known as matrikines. Cosmetic peptides are produced either through chemical synthesis or via biotechnological processes. Their claimed biological activities include signaling to increase collagen and hyaluronic acid production, modulation of pigmentation, maintenance of a healthy skin microbiome, antioxidant activity and cellular defense, immunomodulation, neurotransmitter inhibition, enzyme activity inhibition and trace mineral carriers. The primary structure and current scientific evidence for the bioactivities of these peptides are presented and discussed. The review highlights the diverse methodological approaches used and the outcomes measured in the assessment of cosmetic peptide efficacy. Overall, a large range of cosmetic peptides are commercially available whose efficacy is supported by divergent levels of in vitro and ex vivo data.}}, author = {{van Walraven, Nathalie and FitzGerald, Richard J. and Danneel, Hans-Jürgen and Amigo-Benavent, Miryam}}, booktitle = {{eptides : an international journal }}, issn = {{0196-9781}}, keywords = {{Bioactive peptides, Cosmetic peptides, In vitro studies, Matrikines : Whitening : Antioxidant : Antimicrobial : Neurotransmitter inhibition, Carrier peptides, Immunomodulatory}}, number = {{11}}, publisher = {{Elsevier BV}}, title = {{{Bioactive peptides in cosmetic formulations: Review of current in vitro and ex vivo evidence}}}, doi = {{10.1016/j.peptides.2025.171440}}, volume = {{193}}, year = {{2025}}, } @misc{13223, author = {{Uhlendorff, Selina and Burankova, Tatsiana and Dahlmann, Katharina and Frahm, Björn and Pein-Hackelbusch, Miriam}}, location = {{Chemnitz}}, title = {{{Application Constraints of Linear Multivariate Regression Models for Dielectric Spectroscopy in Inline Bioreactor Viable Cell Analysis}}}, year = {{2025}}, } @misc{13225, abstract = {{In recent years, there has been an increasing awareness of the importance of incorporating diversity into research projects, focusing on both how they are conducted and their content. Funding organizations have started to require that research applicants pay attention to inclusion and diversity by considering gender dimensions and other diversity factors in their project plans and ensuring gender equality during execution. Based on an extensive literature research and expert discussions on how to develop and implement diversity strategies in large collaborative research projects, we argue that there is a lack of practical advice in existing literature. Drawing from our own experiences in conceptualizing and implementing a Diversity Program across four universities in Germany, we propose a framework for effectively integrating diversity into collaborative research initiatives across various academic fields.}}, author = {{Lorke, Mariya and Amelung, Rena and Kuchling, Peter and Paaßen, Benjamin and Pein-Hackelbusch, Miriam and Schloots, Franziska and Schulz, Klara and Nauerth, Annette}}, booktitle = {{Diversity & Inclusion Research}}, issn = {{2835-236X}}, keywords = {{collaborative research projects, diversity strategy, gender equality}}, number = {{4}}, publisher = {{Wiley}}, title = {{{Development and Implementation of Diversity Programs in Large Collaborative Research Projects: An Example From Germany}}}, doi = {{10.1002/dvr2.70040}}, volume = {{2}}, year = {{2025}}, } @misc{13227, abstract = {{Diese Arbeit untersucht, wie kulturelle Perspektiven die ästhetische Wahrnehmung im dokumentarischen Film prägen und wie dieser Einfluss in der Kameraarbeit sichtbar wird. Ausgangspunkt ist eine in Marokko produzierte Dokumentation, die junge Menschen aus den verschiedenen Orten Imsouane, Tafraoute und Casablanca porträtiert. Theoretische Ansätze zu ästhetischer Wahrnehmung, kultureller Prägung und dokumentarischer Bildästhetik bilden den Rahmen, um eigene Kameraentscheidungen kritisch zu analysieren. Anhand ausgewählter Szenen wird deutlich, dass dokumentarische Bilder nicht nur Realität abbilden, sondern durch Auswahl, Perspektive und Bildgestaltung aktiv Bedeutungen erzeugen. Bestimmte Szenen zeigen, wie stark der westlich geprägte Blick eingefangene Motive beeinflusst, die für die Mitwirkenden alltäglich sind. Gleichzeitig verdeutlichen spontane Begegnungen, dass die Offenheit für das Ungeplante ebenso wichtig sein kann, wie bewusst geplante Situationen. Die Ergebnisse unterstreichen, dass kulturelle Prägung keine Einschränkung ist, sondern eine gestalterische Ressource sein kann. Die bewusste Reflexion dieser Einflüsse ermöglicht es, Bilder zu schaffen, die ästhetisch ansprechend sind und zugleich zur Hinterfragung eigener Wahrnehmungsmuster einladen.}}, author = {{Wussow, Vincent}}, keywords = {{Dokumentarfilm, Kamera, Ästhetik, Nordafrika, Marokko}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Subjektive Ästhetik – Wie kulturelle Verortung und individuelle Wahrnehmung Schönheit definieren: Eine Analyse am Beispiel der Kameraarbeit einer Marokko-Dokumentation}}}, year = {{2025}}, } @misc{13231, abstract = {{Die Bachelorarbeit untersucht, wie die eigene Position des Regisseurs im dokumentarischen Interview bewusst gestaltet werden kann, um Gesprächsdynamiken in interkulturellen Kontexten zu fördern. Ausgangspunkt ist ein Dokumentarfilmprojekt in Marokko (Imsouane, Tafraoute, Casablanca), in dem junge Menschen über ihre Kultur- und Zukunftsvorstellungen sprechen. Theoretisch stützt sich die Arbeit auf Konzepte dokumentarischer Ethik (Rabiger, Troller), interkultureller Kommunikation (Hoffmann, TOPOI-Modell), Psychologie (Boesch, Bartmann) sowie Kulturstandards (Thomas, Krewer). Zentral wird ein Fünf-Phasen-Modell des interkulturellen Interviews entwickelt, das den Prozess als kollektiven Aushandlungsraum beschreibt: (1) Selbstverortung, (2) Fremdheit und Projektion, (3) Aktivierung kollektiver Schnittmengen, (4) Öffnung und Aushandlung sowie (5) Spiegelung und Veränderung. Dieses Modell versteht Interviews als zirkuläre Prozesse, in denen Nähe und Differenz fortlaufend neu verhandelt werden. Die Analyse ausgewählter Interviewszenen zeigt, dass geteilte Kollektive – etwa gemeinsame biografische Bezüge oder Werte – die entscheidende Grundlage für Vertrauen und Tiefgang bilden. Fremdheit erweist sich dabei nicht als Hindernis, sondern als produktive Ressource, die dialogische Prozesse anregen kann. Zugleich werden Grenzen sichtbar, etwa in Übersetzungssettings oder bei unausgeglichenen Machtverhältnissen. Die Arbeit leistet damit einen Beitrag zur dokumentarischen Praxis, indem sie Theorie und Regieerfahrung verbindet und ein praxisnahes, reflexives Modell zur Gestaltung interkultureller Interviews vorschlägt.}}, author = {{Niemeier, Tobias}}, keywords = {{Dokumentarfilm, Interviewführung, Interkulturelle Kommunikation, Gesprächsdynamik, Multikollektivität, Fremdheit, Nähe und Distanz, Ethik im Dokumentarfilm, TOPOI-Modell, Kollektive Schnittmengen}}, pages = {{20}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Interkulturelle Interviewführung im Dokumentarfilm „Wie kann die eigene Position als Regisseur bewusst eingesetzt werden, um Gesprächsdynamiken im interkulturellen Interview zu fördern?“}}}, year = {{2025}}, } @misc{13233, abstract = {{Atranones are secondary metabolites produced by Stachybotrys chartarum, a mold frequently found in water-damaged indoor environments. In contrast to the well-characterized and highly toxic macrocyclic trichothecenes, atranones have received relatively limited scientific attention. Approximately 60% of S. chartarum isolates from indoor environments produce atranones, while 40% form macrocyclic trichothecenes. No strain has been shown to produce both, indicating that the biosynthetic pathways for these two mycotoxin classes are mutually exclusive. Atranones are dolabellane-like diterpenoids synthesized from geranylgeranyl pyrophosphate through multiple enzymatic steps encoded by a specific core gene cluster. While the genetic structure of this cluster has been elucidated, its regulatory mechanisms remain poorly understood. Notably, although atranone-producing S. chartarum strains have been isolated from indoor settings, no study has yet confirmed the actual production of atranones in indoor environments, leaving the question of real-world exposure unresolved. Experimental studies in cell cultures and animal models indicate that atranones possess pro-inflammatory and cytotoxic properties, including the induction of apoptosis and cell cycle arrest. Atranone Q has demonstrated antitumor activity against osteosarcoma cells in vitro, and more recently identified derivatives such as stachatranone and stachybatranone have shown preliminary cardioprotective effects under ischemic conditions. However, these pharmacological effects remain exploratory and require further validation in in vivo models. Major knowledge gaps concern the environmental triggers for atranone biosynthesis, their regulation, actual presence in built environments, and potential health risks. These areas represent key priorities for future research. }}, author = {{Dabisch-Ruthe, Mareike and Pfannebecker, Jens and Straubinger, Reinhard K. and Ebel, Frank and Ulrich, Sebastian}}, booktitle = {{Mycotoxin Research}}, issn = {{1867-1632}}, keywords = {{Atranone, Secondary metabolite, Stachybotrys, Stachatranone, Stachybatranone}}, publisher = {{Springer}}, title = {{{Atranone-an underestimated secondary metabolite?}}}, doi = {{10.1007/s12550-025-00609-x}}, year = {{2025}}, } @misc{13234, author = {{Esten, Marlene}}, keywords = {{Requisite, Special Effects Requisite, SFX, Askir, Film, Art Department}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Special Effects Requisiten - Herstellung eines Hundekadavers für eine Fantasyserie}}}, year = {{2025}}, } @misc{13236, author = {{Pilar von Pilchau, Katharina}}, location = {{Koblenz}}, title = {{{Identifikation von Schlüsselflächen zum Wasserrückhalt in der Fläche - Eine GIS-basierte Analyse in einem hydrologischen Einzugsgebiet im Weserbergland}}}, year = {{2025}}, } @misc{13243, author = {{Willgart, Fabian}}, pages = {{53}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{CGI-Integration im Puppentrick ; Eine Workflow Entwicklung anhand eines CG Head-Replacements}}}, year = {{2025}}, } @misc{13246, abstract = {{Although electronic nose technology has been studied for years, drift effects remain one of the major challenges. While ongoing research focuses on effective correction methods, the evaluation of these methods requires reliable and well-documented datasets. However, only a few drift datasets are available, some of which lack sufficient experimental detail or are outdated. This motivated us to introduce a new long-term drift dataset. It has been collected over 12 months using a commercial electronic nose, which is based on 62-metal oxide sensors. The measurements were conducted under controlled experimental conditions with three analytes (diacetyl, 2-phenylethanol, and ethanol) in different concentrations. The dataset consists of 700 time-series recordings, for which we provide both the raw data and a set of pre-extracted features. The data can support the development, evaluation, and comparison of methods for feature extraction and selection, as well as drift detection and compensation. By providing a comprehensive, well-documented dataset, we aim to advance research on sensor drift in electronic nose systems.}}, author = {{Wörner, Julius and Eimler, Jonas and Pein-Hackelbusch, Miriam}}, booktitle = {{Scientific Data}}, issn = {{2052-4463}}, publisher = {{Nature Research}}, title = {{{Long-term drift behavior in metal oxide gas sensor arrays: a one-year dataset from an electronic nose}}}, doi = {{10.1038/s41597-025-05993-8}}, volume = {{12}}, year = {{2025}}, } @misc{13253, abstract = {{This study explores the transition from a linear to a circular economy in the building and construction industry, focusing on the environmental impacts of façade systems in office buildings. The linear „Take-Make-Dispose“ model contributes significantly to resource consumption, waste generation, and CO2 emissions, with the construction sector responsible for 35% of global waste. The EU‘s Circular Economy Action Plan emphasizes designing products to minimize waste and retain resources, highlighting the importance of end-of-life (EoL) considerations in construction. Life Cycle Assessment (LCA) is employed to evaluate the environmental impacts of design decisions, particularly for stick curtain wall systems, which are widely used in office buildings. The research adopts a mixed methodology, combining literature review and design process analysis, focusing on frame materials (aluminum, steel, wood) and glass options. Three EoL scenarios—reuse, recycling, and demolition—are assessed to determine their impact on embodied carbon. The study is limited to office buildings in Germany, with a case study in Stuttgart, due to the prevalence of stick systems in such structures. Preliminary findings indicate that reuse scenarios generally have the lowest environmental impact, though outcomes vary based on material combinations. By systematically analyzing EoL scenarios, this research provides a framework for optimizing façade designs to enhance sustainability, reduce waste, and promote circularity in real-world construction projects.}}, author = {{Badr, Abdelrahman Walid Shawky Mahmoud and Arztmann, Daniel and Starz, Florian and Herrmann, Carmen}}, booktitle = {{DESIGN STRATEGIES : SPECIAL ISSUE Impulses from teaching and research}}, issn = {{2943-4467}}, keywords = {{circularity, end of life scenarios, embodied carbon, stick systems}}, number = {{4}}, pages = {{39--45}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Circular Facade Design: The Importance of end of life scenarios to reduce environmental Impact}}}, volume = {{2025}}, year = {{2025}}, } @misc{13259, author = {{Arztmann, Daniel}}, location = {{Lissabon}}, title = {{{Investigating Heat Development in Shadow Box Facade Systems}}}, year = {{2025}}, } @misc{13260, author = {{Arztmann, Daniel}}, location = {{Utrecht}}, title = {{{Special Facade Design Solutions}}}, year = {{2025}}, } @misc{13261, author = {{Arztmann, Daniel}}, location = {{Mainz}}, title = {{{Fassadensanierungsstrategien im Spannungsfeld von Wissenschaft und Wirtschaft}}}, year = {{2025}}, } @misc{13262, author = {{Arztmann, Daniel}}, location = {{Nairobi, Kenia}}, title = {{{Customized Solutions for Sustainable and Cost-Effective Building}}}, year = {{2025}}, } @book{13265, abstract = {{Der große Interior-Award für die Gastronomie und Hotellerie versammelt 50 herausragende Interior-Design-Konzepte, sorgfältig ausgewählt von einer interdisziplinären Jury aus Planer:innen, Vertreter:innen aus Gastronomie und Hotellerie sowie Fachjournalist:innen. Von reduzierten Interieurs bis zu opulenten und multimedialien Inszenierungen, von Zero-Waste-Konzepten bis zu spektakulären Umnutzungen: Die ausgezeichneten Beispiele erzählen von der Kreativität, dem Gespür für Trends – und nicht zuletzt von der Begeisterung der Planer:innen und Gastgeber:innen für ihren Beruf. Ergänzt durch Hintergrundgeschichten, Facts & Figures sowie Informationen zu Produkten und Herstellern bietet die Publikation Inspiration und Hilfestellung für eigene Projekte.}}, author = {{Wiewiorra, Carsten and Hellstern, Cornelia}}, isbn = {{978-3-7667-2771-8}}, pages = {{296}}, publisher = {{Callwey}}, title = {{{Die schönsten Restaurants, Hotels & Bars }}}, year = {{2025}}, } @misc{13267, abstract = {{Die Arbeit widmet sich dem Einsatz von Storyboards in Live-Action und Animation. Sie befasst sich mit dem Aufbau und der Erstellung des Storyboards und erforscht, welche Priorisierung es in verschiedenen Filmgenres bedarf. Der theoretische Teil behandelt den Aufbau eines Storyboards und die Materialien, die für die Umsetzung benötigt werden. Anhand von Beispielen werden Unterschiede zwischen verschiedenen Filmgattungen erforscht, um herauszustellen, welche Details genrespezifisch benötigt werden. Im praktischen Teil wird anhand der digitalen Erstellung eines Storyboards die Produktion für einen Kurzfilm veranschaulicht. Die Anfertigung findet in mehreren Iterationen statt, die nach Gesprächen zwischen Regie und Storyboardartist erstellt werden. }}, author = {{Drescher, Martina}}, keywords = {{Animation, Storyboard, Film, Vorproduktion, Preproduction}}, pages = {{74}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Lebendige Skizzen: Storyboards in Animation und Film}}}, year = {{2025}}, } @misc{13271, abstract = {{Pasteurization is the prevalent method for stabilizing cloudy apple juice and prolonging its shelf life, but can also impair quality. Therefore, it is necessary to investigate and quantify the chemical, physical and sensory effects of this treatment. In this study, cloudy apple juice was treated at different time-temperature combinations with equivalent microbial lethality with 161.6 PU. These can be categorized as low temperature/long time (LTLT with 70°C and 80°C) or high temperature/short time (HTST with 90°C, 100°C and 105°C) treatments. The results were compared to those of untreated juice. HTST treatment had significantly less impact on the juice compared to LTLT treatment. LTLT-treated juices were characterized by different sensory attributes, such as raisin and caramel odor and bitter taste. In contrast, the untreated and HTST-treated juices exhibited odors like pear and lemon. There were also significant differences in turbidity, sugar composition, viscosity and a heightened 5-(hydroxymethyl)furfural (HMF) content with LTLT treatment. In summary, HTST-treated juices are more similar to the untreated juices and are rated higher in terms of quality characteristics. The lowest pasteurization temperature of 70°C results in the greatest deterioration of juice quality. It can be concluded that different pasteurization conditions showed different effects on juice quality, despite having the same microbiological lethality of 161.6 PU. Results can be considered when designing pasteurization processes.}}, author = {{Katsch, Linda and Sokolowsky, Martina and Gibson, Brian and Schneider, Jan}}, booktitle = {{Applied Food Research}}, issn = {{2772-5022}}, keywords = {{Cloudy apple juice, HTST, juice pasteurization, sensory analysis, process optimization, equivalent microbial lethality}}, number = {{2}}, publisher = {{Elsevier}}, title = {{{Influence of different pasteurization conditions with equivalent pasteurization units on chemical, physical, and sensory properties of cloudy apple juice}}}, doi = {{10.1016/j.afres.2025.101471}}, volume = {{5}}, year = {{2025}}, } @misc{13274, author = {{Neumann, Philipp and Faupel, Christian}}, booktitle = {{Controlling & Management Review : Zeitschrift für Controlling & Management }}, issn = {{2195-8270 }}, number = {{5}}, pages = {{46--53}}, publisher = {{Springer Gabler, Springer-Fachmedien Wiesbaden }}, title = {{{Controller-Rollen in Stellenanzeigen}}}, year = {{2025}}, } @misc{13276, author = {{Peitsch, Luis}}, pages = {{51}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Mode als Spiegel Gesellschaftlicher Transformationen}}}, year = {{2025}}, } @misc{13279, author = {{Spilker, Felix}}, pages = {{53}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Die Entwicklung der Berichterstattung über die Tour de France im öffentlich-rechtlichen Fernsehen}}}, year = {{2025}}, } @inbook{13282, abstract = {{Green infrastructure is a novel approach to landscape planning. Its innovation potentials lie in the comprehensive view of nature and landscape, which includes ecological, socio-cultural, aesthetic, and economic aspects and addresses diverse socio-political goals such as climate change or social cohesion. The broadly based and in parts vague concept offers opportunities precisely because of the possibilities for interpretation to discuss and integrate the development of landscapes from different perspectives. Therefore, the planning and implementation of green infrastructure requires participatory approaches that involve various disciplines and interest groups as well as consider and promote civic engagement.}}, author = {{Pauleit, Stephan and Hansen, Rieke and van Lierop, Martina and Rall, Emily L. and Rolf, Werner}}, booktitle = {{Landscape Handbook : German Language Research Perspectives}}, editor = {{Kühne, Olaf and Weber, Florian and Berr, Karsten and Jenal, Corinna}}, isbn = {{978-3-031-83146-1}}, issn = {{2731-4510}}, keywords = {{Landscape planning, Multifunctionality, Connectivity, Integration, Participatory planning}}, pages = {{991–1002}}, publisher = {{Springer Nature Switzerland}}, title = {{{Green Infrastructure and Landscape}}}, doi = {{10.1007/978-3-031-83147-8_88}}, year = {{2025}}, } @misc{13291, abstract = {{The application of Large Language Models (LLMs) for the automated generation of assembly instructions shows significant potential for improving work preparation in production processes. However, challenges remain regarding the overall information quality and precision of the generated instructions. In light of these challenges, this study explores how the information quality of automatically generated assembly instructions can be enhanced through the targeted provision of structured input data, such as Assembly and Quantity BOMs (Bills of Materials), as well as the use of optimized prompt chaining techniques. The methodology employs ChatGPT-4o in combination with Retrieval Augmented Generation (RAG) within the Microsoft Azure environment. The results demonstrate that structured data inputs, particularly the use of Assembly BOMs with defined Tool-to-Component relations, significantly improve the precision and relevance of the generated instructions. Despite these advancements, achieving consistent information quality remains a barrier to broader practical implementation. Therefore, feedback loops should be integrated into the assembly instruction generation process to ensure continuous refinement and reliability. Future research should investigate the use of RAG or similar frameworks, focusing on optimizing data structures and implementing feedback mechanisms to enhance the automated generation of assembly instructions.}}, author = {{Herbort, Robin and Green, Dominik and Hinrichsen, Sven}}, booktitle = {{Intelligent Human Systems Integration (IHSI 2025): Integrating People and Intelligent Systems}}, editor = {{Ahram, Tareq and Karwowski, Waldemar and Martino, Carlo and Di Bucchianico, Giuseppe and Maselli, Vincenzo }}, isbn = {{978-1-964867-36-6}}, issn = {{2771-0718}}, keywords = {{Assembly Instruction, Retrieval Augmented Generation (RAG), Large Language Model (LLM)}}, location = {{Rome, Italy}}, pages = {{765--775}}, publisher = {{AHFE }}, title = {{{Automatic Creation of Assembly Instructions by Using Retrieval Augmented Generation}}}, doi = {{10.54941/ahfe1005883}}, volume = {{160}}, year = {{2025}}, } @misc{13292, abstract = {{The application of Large Language Models (LLMs) for the automated generation of assembly instructions shows significant potential for improving work preparation in production processes. However, challenges remain regarding the overall information quality and precision of the generated instructions. In light of these challenges, this study explores how the information quality of automatically generated assembly instructions can be enhanced through the targeted provision of structured input data, such as Assembly and Quantity BOMs (Bills of Materials), as well as the use of optimized prompt chaining techniques. The methodology employs ChatGPT-4o in combination with Retrieval Augmented Generation (RAG) within the Microsoft Azure environment. The results demonstrate that structured data inputs, particularly the use of Assembly BOMs with defined Tool-to-Component relations, significantly improve the precision and relevance of the generated instructions. Despite these advancements, achieving consistent information quality remains a barrier to broader practical implementation. Therefore, feedback loops should be integrated into the assembly instruction generation process to ensure continuous refinement and reliability. Future research should investigate the use of RAG or similar frameworks, focusing on optimizing data structures and implementing feedback mechanisms to enhance the automated generation of assembly instructions.}}, author = {{Herbort, Robin and Green, Dominik and Hinrichsen, Sven}}, booktitle = {{Intelligent Human Systems Integration (IHSI 2025): Integrating People and Intelligent Systems}}, editor = {{Ahram, Tareq and Karwowski, Waldemar and Martino, Carlo and Di Bucchianico, Giuseppe and Maselli, Vincenzo}}, isbn = {{978-1-964867-36-6}}, issn = {{2771-0718}}, keywords = {{Retrieval Augmented Generation, Large Language Model, Assembly Instructions}}, location = {{Rome}}, publisher = {{AHFE}}, title = {{{Automatic Creation of Assembly Instructions by Using Retrieval Augmented Generation}}}, doi = {{10.54941/ahfe1005883}}, volume = {{160}}, year = {{2025}}, } @misc{13293, abstract = {{The performance of large language models (LLMs) has improved significantly in recent years, with the result that they are now used in many companies in various industries. However, the design of a company-specific information system involving an LLM is associated with a large number of decisions. This leads to a high level of complexity in the design task. Against this background, companies need a structured approach that methodically supports the planning, development, implementation and long-term maintenance of LLM-based information systems so that domain- and company-specific requirements are taken into account as a result. This article therefore describes a method that supports the design, introduction and maintenance process of an LLM-based information system. The method consists of a process model and a list of design principles, which are also referred to as success factors. The process model developed is based on the proven six-stage REFA planning system. To identify and describe success factors, a systematic literature search was carried out. Based on an analysis of the contents of individual literature sources, success factors for the design of LLM-based information systems were identified. These success factors relate, for example, to the quality of the data provided, data security, user-centered system design and feedback mechanisms for improving information output.}}, author = {{Hinrichsen, Sven and Herbort, Robin and Green, Dominik and Adrian, Benjamin}}, booktitle = {{Human Interaction and Emerging Technologies (IHIET 2025)}}, editor = {{Ahram, Tareq and Motschnig, Renate }}, isbn = {{978-1-964867-73-1}}, issn = {{2771-0718}}, keywords = {{Large language model, Information system, Retrieval augmented generation}}, location = {{Vienna}}, publisher = {{AHFE}}, title = {{{How to Design an Operation-Specific LLM-Based Information System}}}, doi = {{10.54941/ahfe1006709}}, volume = {{197}}, year = {{2025}}, } @misc{13294, abstract = {{Die Leistungsfähigkeit von Large Language Models konnte in den letzten Jahren deutlich verbessert werden, so dass viele Unternehmen solche Modelle bereits einsetzen oder ihren Einsatz planen. Die Gestaltung eines betriebsspezifischen Informationssystems unter Einbeziehung eines Large Language Model (LLM) ist allerdings mit einer Vielzahl an Entscheidungen verbunden. Vor diesem Hintergrund wird in diesem Beitrag eine Methode beschrieben, die bei der Gestaltung und Einführung eines LLM-basierten Informationssystems unterstützen kann, um im Ergebnis eine möglichst anforderungsgerechte Lösung zu entwickeln. Diese Methode besteht dabei aus einem Vorgehensmodell und einer Liste mit Gestaltungsprinzipien, die auch als Erfolgsfaktoren bezeichnet werden.}}, author = {{Hinrichsen, Sven and Herbort, Robin and Green, Dominik and Adrian, Benjamin}}, booktitle = {{Arbeit 5.0: Menschzentrierte Innovationen für die Zukunft der Arbeit}}, isbn = {{978-3-936804-36-2}}, keywords = {{Large Language Model, Informationssystem, Methode}}, location = {{Aachen}}, pages = {{642--647}}, publisher = {{GfA-Press}}, title = {{{Vorgehensmodell zur Entwicklung und Implementierung von LLM-basierten Informationssystemen}}}, year = {{2025}}, } @misc{13296, author = {{Weishaupt, Imke and Begemann, Jens and Struck, Susanne and Matthäus, Bertrand and Schneider, Jan}}, location = {{Berlin}}, title = {{{Ressourceneffizientere Lebensmittelproduktion durch Umsetzung eines Raffineriekonzepts am Beispiel der Bierherstellung}}}, year = {{2025}}, } @misc{13301, abstract = {{Production environments are characterized by an increasingly diverse workforce caused by demographic change, globalization, and the rising demand for inclusion and equality. To ensure employee satisfaction for such a diverse workforce, gamification is a promising method. However, one-size-fits-all approaches are not sufficient, and more user-adaptive and inclusive gamified systems are needed. Therefore, this systematic literature review aims to answer the question of which user-adaptive gamified systems exist for manufacturing and how they provide inclusivity for individuals in their everyday work. Following PRISMA guidelines, a search of five electronic databases retrieved 22 relevant articles. Analysis of the literature revealed a lack of user-centered and inclusive gamified systems. Further, limited empirical evaluations in real production environments, limited application scenarios, and the need for more diverse research were identified. Based on the results, this study identifies key research gaps and provides recommendations for future research.}}, author = {{Mordaschew, Viktoria and Latos, Benedikt and Rubart, Jessica and Röcker, Carsten}}, booktitle = {{International Journal of Human–Computer Interaction}}, issn = {{1532-7590}}, keywords = {{Gamification, manufacturing, inclusivity : human-centered systems : literature review}}, pages = {{1--28}}, publisher = {{Taylor & Francis}}, title = {{{User-Centered Gamification in Manufacturing: A Systematic Literature Review}}}, doi = {{10.1080/10447318.2025.2578390}}, volume = {{41}}, year = {{2025}}, } @misc{13306, author = {{Steinkuhl, Anika}}, booktitle = {{Innovative Verwaltung}}, issn = {{2192-9068}}, number = {{11}}, pages = {{12--15}}, publisher = {{SpringerGabler}}, title = {{{Kreislaufwirtschaft bei Rückbau öffentlicher Gebäude}}}, year = {{2025}}, } @misc{13307, abstract = {{Urban transformation and urban preservation are often seen as contradicting goals. Currently, there is no agreed - upon strategy on how to transform historic parts of the city while maintaining their heritage values. Many cities today are characterised by modern 20th - century heritage, yet it poses a challenge to their liveability and to the adoption of less car - dependent lifestyles. The concept of 15 - minute cities can be used to improve urban liveability, which may positively affect the experience and functionality of modern historic urban landscapes (HUL). A review of the existing literature on the 15 - minute city concept was carried out with the aim of identifying its key indicators and proposing possible new ones. This research primarily explores how the 15 - minute city concept can be applied holistically and efficiently in modern heritage. Following the PRISMA guidelines, 20 articles published after the introduction of the concept and meeting the inclusion criteria in the Scopus and Web of Science (WoS) databases were reviewed. Selected examples and case studies are analysed to contextualise these variables and explore how they can be reflected in modern historic urban landscapes. As a result, the following variables are identified as central to the 15 - minute city concept: mobility, time, distance, speed, functions of the amenities each with their associated indicators. Moreover, spatial characteristics, human - centred factors and heritage values are proposed as variables. The results are expected to give insights into how to operationalise the concept of 15 - minute cities in modern sites of historic urban landscapes, in order to improve liveability while simultaneously preserving its values. This research contributes to the Sustainable Development Goals (SDGs) by promoting walkable, climate - resilient neighbourhoods. In particular, it aligns with SDG Target 11.4, which focuses on cultural and natural heritage.}}, author = {{Erol, Aylin and Cardinali, Marcel and Kost, Susanne and Pottgiesser, Uta}}, booktitle = {{Inżynieria Mineralna}}, issn = {{1640-4920}}, keywords = {{15-minute city, historic urban landscapes (HUL), Sustainable Development Goals (SDGs), heritage, modernism, urban indicators}}, number = {{2}}, pages = {{1--9}}, publisher = {{Polskie Towarzystwo Przeróbki Kopalin }}, title = {{{A Systematic Review of the 15-Minute City Concept: Indicators for Urban Liveability and Sustainability}}}, doi = {{10.29227/im-2025-02-02-123}}, volume = {{2}}, year = {{2025}}, } @misc{13308, abstract = {{Die Bachelorarbeit untersucht, wie sich KI-generierte Bilder in sozialen Medien von echten und bearbeiteten Bildern unterscheiden lassen und inwieweit Nutzer:innen diese zuverlässig erkennen können. Ausgangspunkt ist die Beobachtung, dass moderne Text-zu-Bild-Modelle fotorealistische Inhalte erzeugen, die für Betrachtende oft kaum von Fotografien zu unterscheiden sind und so Desinformation, Vertrauensverlust und die Glaubwürdigkeit visueller Belege schwächen. Theoretisch werden zunächst Grundlagen digitaler Bilder, typische Artefakte sowie eine Typologie echter, bearbeiteter und KI-generierter Bilder entwickelt. Daran anschließend beschreibt die Arbeit zentrale Generationsverfahren (insbesondere Generative Adversarial Networks und Diffusionsmodelle), diskutiert den Einfluss verzerrter Trainingsdaten und leitet wiederkehrende visuelle Auffälligkeiten KI-generierter Porträts ab, etwa anatomische Fehler, stilistische Glättungen oder physikalische Inkonsistenzen. Darauf aufbauend wird ein interaktives Webquiz konzipiert und technisch mit React und TypeScript umgesetzt, in dem Nutzer:innen jeweils ein fotografisches und ein KI-generiertes Bildpaar vergleichen und das synthetische Bild identifizieren sollen. Ein gezieltes Feedbacksystem erläutert bei Fehlentscheidungen die relevanten Merkmale und soll weniger Leistung messen als vielmehr für die Schwierigkeit der Unterscheidung sensibilisieren. Abschließend werden Chancen und Risiken KI-generierter Bilder im Kontext politischer Desinformation, journalistischer Standards und Medienkompetenz diskutiert. Die Arbeit zeigt, dass menschliche Erkennungsleistungen klaren Grenzen unterliegen, interaktive Lernformate wie das entwickelte Quiz aber das Bewusstsein für typische KI-Artefakte stärken und als Grundlage für zukünftige empirische Studien zur Medienbildung dienen können. }}, author = {{Kröger, Nils}}, keywords = {{KI-Bildgenerierung, Bildforensik, Desinformation, Medienkompetenz, Diffusionsmodelle, Generative Adversarial Networks}}, pages = {{67}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{KI-generierte Bilder in sozialen Medien: Nutzerwahrnehmung und Sensibilität durch ein interaktives Quiz}}}, year = {{2025}}, } @misc{13310, abstract = {{The mental health crisis among university students is gradually increasing, from psychological fatigue, burnout, and anxiety to suicide, forcing universities to integrate a mental health focus in sustainable campus planning. Mental health can be influenced, either alleviated or exacerbated, by the academic environment. Campus Sustainability Assessment Tools (CSATs) provided various indicators, but few include spatial indicators related to mental health. To bridge this gap, it is essential to understand the influence of spatial aspects on students’ psychological well - being. Identifying environmental stressors and spatial qualities and translating them into indicators that can be consistently defined and evaluated is relevant. This study aims to address the gap in CSATs regarding students' mental health and to develop spatial indicators for universities to embed mental health. The goal is to propose spatial indicators that allow universities to evaluate and measure the relationship between the built campus environment and mental health. A comparative analysis was conducted on ten CSAT frameworks and two related frameworks, including the Global Reporting Initiative (GRI) and the Circular Economy (CE), with a focus on identifying and evaluating existing assessments. In parallel, a review was conducted to analyze key psychological stressors and interventions in the academic environment for university students' mental health. This included formulating spatial indicators that describe, quantify, and assess the relationship to psychological outcomes. Findings show that existing CSATs prioritize curriculum and teaching approaches, and research includes scholarship, social network, and operational aspects. However, only the Sustainability Tool for Auditing Universities' Curricula in Higher Education (STAUNCH) and Sustainability Tracking, Assessment & Rating System (STARS) explicitly reference mental health. Apart from STAUNCH and UI GreenMetric, which include indicators of biodiversity and green space ratio, respectively, nearly all frameworks focus on non - physical, conceptual metrics. The identification of spatial indicators is linked to specific design attributes — such as natural light, spatial openness, and access to nature — that promise reduced stress and enhanced emotional well - being. Key findings related to the study’s spatial indicators propose a three - part indicator set: 1. Psycho - spatial indicators (e.g., light, acoustic, and visual comfort, finishing material, accessibility, air quality, layout) . 2. Socio - spatial indicators (e.g., communal area, visibility, accessibility, safety, interconnection) . 3. Restorative spatial indicators (e.g., naturalness, spatiality, safety and security, privacy - public balance) . Universities must focus on preserving students’ mental health by improving their physical environments, especially because supporting and fostering mental health is no longer optional. Understanding the tangible ways in which space impacts mental health enables universities to define clear, measurable criteria for improvement. These findings offer a practical foundation for evaluating existing environments and guiding future design interventions. A three - part indicator set will be developed and applied through a mixed - method case study approach, implemented in two existing campuses, and it will be examined in depth via on - site observations, structured interviews, and student surveys to capture both measurable data and lived experiences. The framework aims to articulate the connection between spatial design and mental health and to establish a methodology for identifying, defining, and assessing these indicators across different university settings.}}, author = {{Nadia, Nathania and Pottgiesser, Uta}}, booktitle = {{Inżynieria Mineralna}}, issn = {{1640-4920}}, keywords = {{campus sustainability, mental health design, spatial indicators}}, number = {{2}}, publisher = {{Polskie Towarzystwo Przeróbki Kopalin}}, title = {{{Sustainable Design for Mental Health: A Framework of Spatial Indicators for University Campuses}}}, doi = {{10.29227/im-2025-02-02-098}}, volume = {{2}}, year = {{2025}}, } @misc{13315, abstract = {{Determining cell density and viability with (semi‐)automated methods enables rapid cell cultivation analysis. However, scientific validation is required, typically by comparing results to manual counting. To address this, we present a method to evaluate and compare two cell counting methods exemplified by a manual and a semi‐automated method (Countstar BioTech). Experiments followed validation parameters aligned with the International Council for Harmonization (ICH) Q2(R1) guideline and a dilution series design based on ISO 20391‐2:2019. Both the semi‐automated and manual methods showed comparable specificity and linearity for Chinese hamster ovary (CHO)‐K1 cells. The semi‐automated method exhibited superior repeatability for total cell density, whereas cell viability results showed no significant difference.}}, author = {{Uhlendorff, Selina and Odefey, Ulrich and Frahm, Björn and Pein-Hackelbusch, Miriam}}, booktitle = {{Chemie Ingenieur Technik}}, issn = {{1522-2640}}, keywords = {{Cell density, Cell enumeration, Cell viability, CHO-K1}}, number = {{1-2}}, pages = {{57–68}}, publisher = {{Wiley}}, title = {{{Performance Comparison between Semi‐Automated and Manual Cell Counting for Animal Cell Culture}}}, doi = {{10.1002/cite.70048}}, volume = {{98}}, year = {{2025}}, } @misc{13316, author = {{Pein-Hackelbusch, Miriam}}, booktitle = {{PTA heute : Praxiswissen für die Apotheke}}, issn = {{0302-167X}}, number = {{23}}, pages = {{38--42}}, publisher = {{Deutscher Apotheker Verlag}}, title = {{{An die Hand genommen - Adhärenz bei Kindern}}}, volume = {{39}}, year = {{2025}}, } @misc{13318, author = {{Pilar von Pilchau, Katharina and Maas, Klaus}}, isbn = {{978-3-910240-04-9}}, pages = {{57}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Leitfaden für die GIS-basierte Fließpfadberechnung}}}, doi = {{https://doi.org/10.25644/7cg5-s973}}, year = {{2025}}, } @misc{13321, abstract = {{This study explores the feasibility and potential of integrating dish–Stirling systems (DSSs) into multigeneration energy systems, focusing on their ability to produce both thermal and electrical energy. By leveraging the concentrated solar power capabilities of DSSs, this research examines their performance relative to alternative solutions such as photovoltaic (PV) systems and solar heating. A 25 kW Stirling Energy Systems (SES) DSS served as the basis for the analysis. Simulations were performed for local 2022 weather conditions in Germany. The study employed a detailed modeling approach using the NREL System Advisor Model (SAM) to quantify the energy outputs and evaluate the system efficiencies. The results indicate that the DSS achieved an electrical efficiency of 25% and a combined efficiency of 78% when accounting for the maximum thermal energy generated. Seasonal analysis highlights the adaptability to fluctuating energy demands, with advantages in winter heating applications. Comparative evaluations revealed DSSs as a viable cogeneration alternative to standalone PV systems and solar heaters, offering reduced environmental impacts and enhanced energy efficiency. Future work will address real-world operational conditions, including thermal storage and multigeneration integration, positioning the DSS as a sustainable solution for renewable energy generation.}}, author = {{Klepp, Georg Heinrich}}, booktitle = {{Sustainability}}, issn = {{2071-1050}}, keywords = {{dish–Stirling system, multigeneration renewable energy systems, cogeneration, solar}}, location = {{Mallorca / Spain }}, number = {{3}}, publisher = {{MDPI AG}}, title = {{{Solar Stirling for Renewable Energy Multigeneration Systems}}}, doi = {{10.3390/su17031257}}, volume = {{17}}, year = {{2025}}, } @misc{13324, author = {{Brüggemeier, Ramón}}, pages = {{89}}, publisher = {{Technische Hochschule OWL}}, title = {{{Intelligente Interaktion - Modulare Integration von Sprachmodellen in Operationssysteme als interaktives Interface}}}, year = {{2025}}, } @misc{13326, abstract = {{Objective The aim of this study was to compare the fattening performance and pork quality of 10 pigs from the endangered breed Bentheim Black Pied (BBS) with 30 F1 pigs from the widely used Danish hybrid pig (Large White x Danish Landrace) crossed with BBS (BHP), all fattened up under free-range conditions. Material and Methods A total of 40 pigs were fattened up under a restrictive feeding regime on a 1.28ha pasture and weighed monthly. Subsequently, the pigs were slaughtered, carcass traits were assessed, and samples from M. longissimus thoracis et lumborum (LTL) and back-fat were collected for laboratory analysis. Results Fattening performance differed significantly between the groups: BHP pigs were significantly heavier at the end of the fattening period (128.3 kg BHP vs. 102.5 kg BBS), with significantly higher average daily weight gain. Significant differences were observed in carcass characteristics (carcass length, cutlet weight, carcass yield). However, BBS pigs showed a more favourable fatty acid profile, notably with higher levels of the essential α-linolenic acid. Water-holding capacity was lower in BHP pigs, with significantly higher drip losses during cold storage at 2°C, while grill- and thawing-losses did not differ significantly. Sensory analysis revealed that untrained panellists were able to distinguish between meat of both groups. BBS meat was rated as more tender, which was also confirmed by significantly lower shear force measurements. Conclusion and Clinical relevance The study showed that crossbreeding BBS and Danish hybrid pigs can compensate for performance deficits of the traditional breed -such as slower growth- while partially retaining beneficial traits, such as a nutritionally superior fatty acid composition. Overall, the results are in line with the expectations for F1 crossbred pigs, when 2 breeds with different performance parameters are used. These findings are relevant for veterinary practitioners involved in sustainable pig production, the conservation of rare breeds, and the development of alternative outdoor husbandry systems.}}, author = {{Küper, Johanna and Frölich, Kai and Stäbler, Rupert and Jaeger, Wilhelm and Junkmann, Dennis and Upmann, Matthias and Schaubmar, Andreas R. and Kehrenberg, Corinna}}, booktitle = {{ Tierärztliche Praxis : mit ATF-anerkannter Fortbildung Unterreihe G, Großtiere, Nutztiere }}, issn = {{2567-5834}}, keywords = {{Schlachtkörperqualität, Freilandschweinemast, sensorische Fleischqualität, Fettsäurenzusammensetzung, Schweinemast}}, number = {{06}}, pages = {{363--371}}, publisher = {{Georg Thieme Verlag KG}}, title = {{{Comparison of meat quality and various clinical parameters from pigs in free-range husbandry : Comparative study between the endangered pig breed Bentheim Black Pied (BBS) and an F1 crossbred pig of Danbred Hybrid and BBS}}}, doi = {{10.1055/a-2712-8469}}, volume = {{53}}, year = {{2025}}, } @misc{13329, author = {{Kemper, Lisa and Wörner, Julius and Schneider, Jan and Pein-Hackelbusch, Miriam}}, location = {{Lissabon, Portugal}}, title = {{{Diacetyl detection by electronic nose in beer-imitating matrices}}}, year = {{2025}}, } @misc{13330, author = {{Frömelt, Ronja}}, pages = {{122}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Das visuelle Erscheinungsbild der Deutschen Bahn im Wandel der Zeit: Von 1945 bis 2010.}}}, year = {{2025}}, } @proceedings{13332, editor = {{Noosten, Dirk}}, isbn = {{978-3-9816586-9-9}}, issn = {{2510-7321}}, location = {{Münster}}, pages = {{103}}, publisher = {{Noosten Verl.}}, title = {{{Bewertung von Immobilien : 28. Symposium für Immoblilienbewertung}}}, year = {{2025}}, } @misc{13340, abstract = {{The IALE European Landscape Ecology Congress, held every four years, is a key event for the European landscape ecology community, bringing together researchers, practitioners, policymakers, students, and stakeholders for knowledge exchange and collaboration. The 2025 congress in Bratislava was especially significant, taking place near Piešťany where IALE was founded in 1982, symbolizing the organization’s evolution from Cold War-era cooperation to a global network. The 2025 meeting continued this legacy by promoting dialogue and action. This editorial examines the 2025 congress, from IALE’s founding in Piešťany to its current role addressing environmental and societal crises. We review its historical context, in particular Eastern European contributions in former Czechoslovakia, and the ongoing influence of pioneers like Prof. Milan Ružička. We then analyze congress participants and their contributions using bibliometric analysis to reveal patterns and international trends. Finally, we reflect on the 2025 issue of Landscape Online, exploring how its publications align with and expand upon the key discussions and innovations that defined this year’s European Congress.}}, author = {{Rolf, Werner and Grădinaru, Simona R. and Halada, Ľuboš and Miklósová, Viktória and Raniak, Andrej and Schirpke, Uta}}, booktitle = {{Landscape Online}}, issn = {{1865-1542}}, keywords = {{Landscape Ecology, Landscape Research, Land Sciences, Landscape Drivers, Landscape Change, IALE, Europe}}, publisher = {{IALE-D}}, title = {{{From Drivers of Landscape Change to Pathways for Action in Landscape Ecology: Key Insights from IALE 2025 Bratislava in a Rapidly Changing World}}}, doi = {{10.3097/lo.2025.1145}}, volume = {{100}}, year = {{2025}}, } @misc{13349, abstract = {{In weakly-structured work processes, workers are free to decide in which sequence to process their tasks. Predicting their decision-making helps plan production more accurately while preserving workers’ autonomy. The factors that influence workers’ decision-making depend on the manufacturing process and person considered, and they must be newly collected for each use case. This paper identifies the factors influencing workers when deciding in which sequence to process manufacturing tasks in a medium-sized hydraulic cylinder manufacturer. Five workers and two lead workers were observed and interviewed during several work shifts about influencing factors. The authors propose a new interview technique called indifference testing to overcome subjects’ difficulty articulating their decision-making process. Collected factors were categorized using inductive category formation and context analysis. The analyses identified 75 influencing factors comprising 37 decision attributes and 38 decision rules. The identified decision attributes indicate that worker preferences are influenced by attributes from the classical scheduling literature and attributes related to worker well-being, circadian rhythms, and ergonomics. The identified decision rules are useful constituents of more complex preference functions. The decision attributes and rules enable the construction of machine learning models to predict workers’ task sequencing decisions in job shops. Potential applications include systematically eliminating or controlling influencing factors through workplace design measures to increase worker well-being and optimality of their decisions.}}, author = {{Herrmann, Jan-Phillip and Tackenberg, Sven and Burgert, Florens and Nitsch, Verena}}, booktitle = {{Procedia Computer Science}}, issn = {{1877-0509}}, keywords = {{Task Sequencing, Manufacturing, Learning To Rank, Scheduling Human Factors, Case Study}}, pages = {{1820--1829}}, publisher = {{Elsevier BV}}, title = {{{Influencing factors on worker task sequencing decisions in a medium-sized hydraulic cylinder manufacturer}}}, doi = {{10.1016/j.procs.2025.01.244}}, volume = {{253}}, year = {{2025}}, } @misc{13350, abstract = {{In einer humanzentrierten Kleinserien- und Einzelfertigung mit Werkstattorganisation verfügen Fertigungsmitarbeitende häufig über eine hohe Autonomie und Entscheidungsfreiheit. Das Zusammenspiel individueller Planungsstrategien von Mitarbeitenden innerhalb eines Fertigungsprozesses kann sich positiv als auch negativ auf das Erreichen der produktionslogistischen Zielgrößen auswirken. In diesem Beitrag wird eine Variante des Flexible Job Shop Scheduling Problems vorgestellt, welches das Entscheidungsverhalten autonomer Arbeitspersonen bezüglich der Bearbeitungsreihenfolgebildung berücksichtigt. Weiterhin wird die Ableitung arbeitsorganisatorischer Gestaltungsempfehlungen durch die Analyse individueller Planungsstrategien von Arbeitspersonen mittels Methoden der erklärbaren künstlichen Intelligenz demonstriert. Betrachtungsgegenstand der Analyse ist die Entscheidung von Arbeitspersonen, in welcher Reihenfolge sie ihre täglichen Aufgaben abarbeiten. Der Beitrag schließt mit einer Diskussion über die Nutzung der vorgestellten Verfahren zur Ableitung von arbeitsorganisatorischen Gestaltungsempfehlungen.}}, author = {{Herrmann, Jan-Phillip and Tackenberg, Sven and Nitsch, Verena}}, booktitle = {{Arbeit 5.0: Menschzentrierte Innovationen für die Zukunft der Arbeit}}, keywords = {{Flexible Job Shop Scheduling, Learning To Rank, Erklärbare Künstliche Intelligenz, Planungsautonomie, Simulation}}, location = {{Aachen}}, pages = {{415--420}}, publisher = {{GfA-Press}}, title = {{{Analyse der Entscheidungsfindung von Fertigungsmitarbeitenden durch erklärbare künstliche Intelligenz zur Ableitung arbeitsorganisatorischer Gestaltungsempfehlungen}}}, doi = {{10.61063/FK2025}}, year = {{2025}}, } @misc{13357, abstract = {{Determination key of German damselfly and dragonfly exuviae (Odonata) – An identification key for the exuviae and final-instar larvae of all 82 damselfly and dragonfly species recorded in Germany to date is presented. The introduction describes methods and search strategies for collecting exuviae, presents phenological aspects being important for exuviae surveys, and introduces methods for recording exuviae. Information is given on the storage, transport and shipping of exuviae and the preservation of larvae. Materials and procedures for the preparation and identification of exuviae and larvae are described. The terminology used in the key to describe the morphological features of exuviae and larvae is given by presenting figures and a glossary. In the main section the determination key for exuviae of all 82 damselfly and dragonfly species recorded in Germany is presented. The breakdown is done down to the species level, except for the following species and species pairs, as no reliable distinctive features are known for them so far: Coenagrion puella/C. pulchellum and Sympecma fusca/S. paedisca, as well as Sympetrum meridionale, whose distinguishing features from S. sanguineum and S. striolatum are not yet sufficiently known. The key baises on the currently known and published distinctive features for exuviae and final-instar larvae, focusing on differentiation characteristics that have proven to be robust and reliable and are also easily recognisable for beginners in exuviae identification. }}, author = {{Lohr, Mathias}}, booktitle = {{Libellula Supplement}}, issn = {{0723-6514}}, keywords = {{Libellenkunde, Odonatologie, Odonata, Bestimmungsschlüssel}}, pages = {{1--96}}, publisher = {{Gesellschaft deutschsprachiger Odonatologen}}, title = {{{Bestimmungsschlüssel für die Exuvien der Libellen Deutschlands (Odonata)}}}, volume = {{18}}, year = {{2025}}, } @misc{13365, abstract = {{Prozessmodellierungssprachen weisen für die Beschreibung und Verbesserung von Geschäftsprozessen eine hohe Bedeutung auf. Zur Formalisierung der Beschreibung bestehen mit K3 und BPMN 2.0 zwei graphische Modellierungssprachen. Im vorliegenden Beitrag erfolgt ein Vergleich der Zeichensätze sowie syntaktischen, semantischen und pragmatischen Merkmale beider Modellierungssprachen. Hierdurch werden die Kernideen von K3 herausgearbeitet und deren Fortbestand in BPMN 2.0 untersucht. Für nicht kongruente Merkmale werden Modellierungsalternativen in BPMN 2.0 dargelegt und die Erkenntnisse im Anschluss kritisch diskutiert. Als Fazit wird die Fähigkeit zum vollständigen Ersatz von K3 durch BPMN 2.0 für die Modellierung von Arbeitsprozessen festgestellt.}}, author = {{Goppold, Marvin and Tackenberg, Sven}}, booktitle = {{Arbeit 5.0: Menschzentrierte Innovationen für die Zukunft der Arbeit}}, keywords = {{Arbeitsanalyse, Arbeitsprozess, Modellierung, Prozessmanagement, Vergleich}}, location = {{Aachen}}, pages = {{257--262}}, publisher = {{GfA-Press}}, title = {{{25 Jahre arbeitswissenschaftliche Prozessmodellierungsprache K3 – Welche Kernideen sind im Praxisstandard BPMN 2.0 enthalten?}}}, year = {{2025}}, } @misc{13366, abstract = {{Die Möglichkeiten von Process Mining Werkzeugen zur automatischen Erzeugung von Arbeits- und Geschäftsprozessmodellen erweitern sich kontinuierlich. Diese Modelle haben eine hohe Bedeutung für das Wissensmanagement und die Verbesserung inner- und überbetrieblicher Geschäftsmodelle. Eine hohe Modellqualität liegt dann vor, wenn eine Konformität des Prozessmodells mit der Syntax der verwendeten graphischen Beschreibungssprache und der semantischen Korrektheit besteht, die zu einer angemessenen Übereinstimmung mit dem modellierten Realweltausschnitt führt. Die algorithmenbasierte Erzeugung von Geschäftsprozessmodellen erfordert aber oftmals eine Revidierung, Verbesserung und Ergänzung von Wissen durch den Menschen. Für den Beitrag ist aus bestehenden Log-Dateien ein graphisches eEPK-Prozessmodell erzeugt worden, welches semantische und notationsbezogene Fehler aufweist. In einer Laborstudie wurde anschließend untersucht, in welchem Umfang Menschen anhand von verschiedenen Formen einer Prozessdarstellung die in einem graphischen Prozessmodell enthaltenen Fehler identifizieren und beheben können.}}, author = {{Tackenberg, Sven and Goppold, Marvin and Duckwitz, Sönke}}, booktitle = {{Arbeit 5.0: Menschzentrierte Innovationen für die Zukunft der Arbeit}}, keywords = {{Prozessmodellierung, Prozessqualität, eEPK, Empirie}}, location = {{Aachen}}, pages = {{708--713}}, publisher = {{GfA-Press}}, title = {{{Identifizierung von Fehlern bei der Erstellung von Prozessmodellen mittels Process Mining}}}, year = {{2025}}, } @misc{13367, abstract = {{Dieses Paper beschreibt ein plug-and-play-fähiges Setup, mit dem verschiedene Formate von Lehrvideos einfach und effizient erstellt werden können. Zunächst werden die grundlegenden Anforderungen an das System formuliert und daraus zentrale Eigenschaften abgeleitet. Anschließend wird der Systemaufbau herstellerunabhängig erläutert, bevor konkrete, in der Praxis getestete Hardwarekomponenten vorgestellt werden. Ziel ist es, eine flexible und sofort einsetzbare Lösung bereitzustellen, die sich leicht in bestehende Lehrformate integrieren lässt.}}, author = {{Üpping, Johannes}}, keywords = {{Lehrvideos, Plug & Play, Inverted Claasroom}}, pages = {{10}}, publisher = {{Technische Hochschule Ostwestfalen Lippe}}, title = {{{Plug-and-Play-Videoproduktion für Lehrvideos}}}, doi = {{https://doi.org/10.25644/z919-7471}}, year = {{2025}}, } @misc{13374, abstract = {{Abstract This article for BauNetz Wissen presents a comparative overview of circular assessment methods in architecture and construction, focusing on tools that evaluate the reuse potential, material circularity, and long-term sustainability of buildings. The contribution examines established frameworks and emerging digital instruments, analyzing their underlying criteria, calculation logics, and practical applicability in early design phases as well as in later planning and certification processes. By contrasting qualitative and quantitative approaches—ranging from material passports and disassembly indices to life-cycle-based scoring systems—the article highlights differences in transparency, data requirements, scalability, and decision-making value for architects and planners. Special attention is given to the relationship between circular metrics and architectural design parameters such as structural reversibility, separability of components, and adaptability of spatial systems. The study argues that no single method provides a comprehensive solution; instead, the strategic combination of tools enables a more nuanced evaluation of circular performance. The article positions circular assessment not merely as a technical verification step, but as a design-integrated methodology capable of shaping architectural thinking toward longevity, resource efficiency, and systemic sustainability.}}, author = {{Konschake, Leon and Regehr, Laura}}, publisher = {{BauNetz}}, title = {{{Zirkuläre Bewertungsmethoden im Vergleich}}}, year = {{2025}}, } @misc{13375, abstract = {{This conference presentation at the IEREK Cross-MED Conference introduces the research framework of the Endless Architecture Model, a design-driven approach that investigates architectural longevity within Mediterranean contexts. The lecture explores how typology, materiality, and cultural embedding influence the life span and adaptability of buildings over time, positioning architecture not as a static object but as an evolving system. Through comparative case studies of Mediterranean buildings, the presentation analyzes recurring spatial structures, constructive logics, and proportional principles that enable long-term resilience and reuse. Particular emphasis is placed on the relationship between climatic conditions, local building traditions, and contemporary circular design strategies. The research combines qualitative architectural analysis with emerging evaluation tools to identify parameters that support durability, flexibility, and cultural continuity. The talk argues for a shift from short-term efficiency toward long-term architectural thinking, proposing longevity as a central sustainability metric. By linking historical precedents with future-oriented design methodologies, the presentation outlines how Mediterranean architecture can serve as a laboratory for developing transferable principles of enduring and circular building practices.}}, author = {{Konschake, Leon}}, location = {{Granada}}, title = {{{Endless Architecture Model: Sustaining Architecture in Mediterranean Contexts Through Typology and Time}}}, year = {{2025}}, } @misc{13409, abstract = {{Spätestens seit dem deutschen Beitrag der 18. Internationalen Architekturbiennale in Venedig sind die Wieder- und Weiterverwendung von gebrauchten, „geretteten“ und vorhandenen Bauteilen, -komponenten und -stoffen im Fachdis- kurs der Planenden-Welt angekommen. „Open for Maintenance – wegen Umbau geöffnet“, kuratiert von Arch+, Sum- macumfemmer und Büro Juliane Greb, hat dem Handlungsansatz des kreislaufgerechten Umbaus einen Pavillon gewid- met und mit Concular, vielen Architekturhochschulen und -universitäten sowie weiteren Akteuren ein lebendiges Depot aus gesammeltem Material geschaffen – vor Ort und digital. Auch in der kommunalen Planungs-, Bau- und Betriebswelt sind Ansätze des zirkulären, kreislaufgerechten Bauens mittlerweile angekommen. Kommunen, wie der Kreis Viersen, die Hansestadt Lüneburg, die Stadt Aachen, der Kreis Lippe oder die Cradle-to-Cradle-Gemeinde Straubenhardt zeigen: Ressourcenschonendes, klimagerechtes und bio-basiertes Bauen in kommunalen Kontexten gelingt.}}, author = {{Pusch, Lisa and Feld, Ursula}}, booktitle = {{Forum Wohnen und Stadtentwicklung, Verbandszeitschrift des vhw e. V.}}, issn = {{1867-8815 }}, keywords = {{Zirkuläres Bauen, Kommunales Bauen, Öffentliche Bauherren, Nachhaltiges Bauen, Nachhaltigkeit, Circular Economy, Kreislaufwirtschaft, Prozesse}}, number = {{Heft 4}}, pages = {{195--200}}, publisher = {{Forum Wohnen und Stadtentwicklung, Verbandszeitschrift des vhw e. V.}}, title = {{{Nachhaltigkeit und zirkuläres Bauen im Bestand: mit Mut ins kommunale Wirken kommen}}}, year = {{2025}}, } @misc{13410, abstract = {{Kommunen sind zentrale Akteure der Bauwende. Als Bauherrinnen, Beteibende von Liegenschaften sowie Trägerinnen von Planungs- und Genehmigungshoheit haben sie vielfältige Möglichkeiten, zirkuläres Bauen aktiv voranzutreiben. Das Forschungsprojekt ProZirkulär wid met sich der Frage, wie Kommunen zirkuläres Bauen strukturell und prozessual als Auftraggebende von Bauvorhaben verankern können. ProZirkulär ist ein dreijähriges, von Zukunft Bau gefördertes Forschungsprojekt unter Beteiligung der Technischen Hochschule Ost westfalen-Lippe mit dem Institut für Energieforschung und dem Lehrgebiet für Bauphysik und Technischem Ausbau sowie dem Kreis Lippe und dem Wissenschaftsladen Bonn.}}, author = {{Schwickert, Susanne and Pusch, Lisa}}, booktitle = {{Zusammen Bauen. Architektur als gesellschaftliche Aufgabe. Zukunft Bau Kongress 2025}}, isbn = {{978-3-87994-104-9}}, issn = {{2199-3521}}, keywords = {{Zirkuläres Bauen, Kommunales Bauen, Öffentliche Bauherren, Nachhaltiges Bauen, Nachhaltigkeit, Circular Economy, Kreislaufwirtschaft, Prozesse}}, location = {{Bonn}}, pages = {{160--165}}, publisher = {{Bundesinstitut für Bau-, Stadt- und Raumforschung (BBSR) im Bundesamt für Bauwesen und Raumordnung (BBR)}}, title = {{{Prozesse neu denken – Aktionsfelder des zirkulären Bauens in kommunalen Verwaltungsstrukturen}}}, volume = {{36}}, year = {{2025}}, } @misc{13411, abstract = {{Kommunen sind zentrale Akteure der Bauwende. Als Bauherrinnen, Beteibende von Liegenschaften sowie Trägerinnen von Planungs- und Genehmigungshoheit haben sie vielfältige Möglichkeiten, zirkuläres Bauen aktiv voranzutreiben. Das Forschungsprojekt ProZirkulär wid met sich der Frage, wie Kommunen zirkuläres Bauen strukturell und prozessual als Auftraggebende von Bauvorhaben verankern können. ProZirkulär ist ein dreijähriges, von Zukunft Bau gefördertes For schungsprojekt unter Beteiligung der Technischen Hochschule Ostwestfalen-Lippe mit dem Institut für Energieforschung und dem Lehrgebiet für Bauphysik und Technischem Ausbau sowie dem Kreis Lippe und dem Wissenschaftsladen Bonn.}}, author = {{Schwickert, Susanne and Pusch, Lisa}}, booktitle = {{Zusammen Bauen. Architektur als gesellschaftliche Aufgabe. Zukunft Bau Kongress 2025}}, isbn = {{978-3-87994-104-9}}, issn = {{2199-3521}}, location = {{Bonn}}, pages = {{160--165}}, publisher = {{Bundesamt für Bauwesen und Raumordnung (BBR)}}, title = {{{Prozesse neu denken – Aktionsfelder des zirkulären Bauens in kommunalen Verwaltungsstrukturen}}}, volume = {{36}}, year = {{2025}}, } @misc{13414, author = {{Schwickert, Susanne and Pusch, Lisa}}, location = {{Digital}}, title = {{{Reallabor Detmold: ProZirkulär ‒ Sanierung eines 70er Jahre Nichtwohngebäudes}}}, year = {{2025}}, } @misc{13415, author = {{Pusch, Lisa}}, location = {{Münster}}, title = {{{Öffentliche Vergabe und Kreislaufwirtschaft: Erfahrungen aus Ostwestfalen-Lippe}}}, year = {{2025}}, } @misc{13433, abstract = {{The use of lubricants on electrical connector contacts is essential for certain applications in order to reduce mating forces, minimize wear, and mitigate fretting corrosion. However, increasing performance requirements (e.g., operation at elevated temperatures) and regulatory restrictions are prompting a reassessment of lubricant selection. In this study, the influence of three lubricants (one oil and two greases), operating temperature (room temperature and 130°C), and applied volume (low, medium and high volume) on electrical contact resistance (ECR) and coefficient of friction (CoF) is investigated by means of fretting wear tests on silver-plated contacts. The results show that unlubricated silver contacts exhibit a longer stable phase at 130 °C than at room temperature. For lubricated contacts, service life is influenced by both temperature and lubricant volume. Certain lubricants demonstrate earlier fail at room temperature than at elevated temperatures. The findings highlight the importance of careful selection and optimization of lubricants for electrical connectors under varying environmental conditions.}}, author = {{Blauth, Michael and Tülling, Sören and Song, Jian}}, booktitle = {{Proceedings of the 70th IEEE Holm Conference on Electrical Contacts (HLM)}}, isbn = {{979-8-3315-5997-7}}, issn = {{2158-9992}}, keywords = {{Connectors, Resistance, Silver, Lubricants, Contacts, Oils, Friction, Corrosion, Optimization}}, location = {{San Antonio, TX, USA }}, publisher = {{IEEE}}, title = {{{Effect of Operating Temperature and Application Quantity of Lubricants on the Fretting Behavior of Silver Plated Electrical Contacts}}}, doi = {{10.1109/hlm51652.2025.11278329}}, year = {{2025}}, } @misc{13435, abstract = {{How can media professionals be made aware of outdated stereotypes about women and encouraged to explore new creative avenues? This master’s thesis seeks to answer this question. Using a curated collection of examples ranging from outdated to discriminatory stereotypes about women in design, the thesis aims to highlight the problem and its impact on equality, equal rights, and self-determination. In addition, an online survey is conducted to capture the general sentiment regarding the perception of stereotypes about women in design, as well as the participants’ subjective feelings and experiences. Furthermore, the thesis examines the extent to which the topic of women’s empowerment is known within the field of design, how it is discussed, and what relevance it holds for participants from different areas of professional practice. It also explores whether gender-specific opinions can be identified and whether there are concrete wishes or approaches for breaking down and avoiding stereotypes. Interviews with experts from various social sectors help examine the topic from multiple perspectives and present individual, practice-based approaches. Definitions, the collection of examples, and video recordings of the expert interviews are published on a website created specifically for this purpose, which also offers visitors the opportunity to share their own experiences and proposed solutions. Suggestions for cross-media support in the form of print products—such as posters, postcards, and stickers—conclude this thesis.}}, author = {{Venus, Leonie}}, pages = {{171}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Design für Women Empowerment – Wie können Medienschaffende für unzeitgemäße Stereotype über Frauen sensibilisiert und zu neuen Gestaltungswegen animiert werden?}}}, year = {{2025}}, } @misc{13448, author = {{Kielmann, Eileen}}, pages = {{85}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{notes from a heavy head – Ein achtsames Migräne-Journal zum Reflektieren, Entlasten und Verstehen}}}, year = {{2025}}, } @inbook{13462, abstract = {{Traditional project management literature often portrays heuristics as flawed shortcuts leading to errors, advocating for rational, debiasing strategies to prevent cost overruns and benefit shortfalls. This is problematic as heuristics can be effective. Building on Gigerenzer’s concept of fast-and-frugal heuristics, this study examines the use of such smart heuristics by senior managers in a large engineering consultancy firm during the early bid/no-bid decision-making phase of infrastructure projects. Employing a qualitative method from the naturalistic decision-making program, the research uncovers a decision strategy termed "thresholding." This strategy distills extensive experience and interpretation of ambiguous information into binary decisions, effectively de-selecting projects that could be potentially disastrous. The approach also gives credence to agency, as it only deselects disasters but keeps many potential alternatives in the portfolio to mature into potentially ‘good projects’. At the same time, it addresses Flyvbjerg’s call for some scrutiny at the front end of projects to avoid catastrophic projects that start on the wrong premises. Our chapter adds to the debate on the Hiding Hand by not being concerned with the “hidden”, but instead, with what can be known in the early fuzzy front-end of projects.}}, author = {{Geraldi, Joana and Stingl, Verena and Schriewersmann, Maximilian}}, booktitle = {{Cambridge handbook of project behavior }}, editor = {{Ika, Lavagnon A. and Pinto, Jeffrey K.}}, isbn = {{9781009322768}}, keywords = {{heuristics, decision making, project behaviour, hiding hand, bid/no-bid decision}}, pages = {{216 -- 232}}, publisher = {{Cambridge University Press}}, title = {{{At the Brink of a Project : Heuristics to Block Potential Project Disasters during the Early Project Opportunity Screening}}}, doi = {{10.1017/9781009322737}}, year = {{2025}}, } @misc{13479, abstract = {{Für ein exzellentes berufliches Bildungsökosystem verfolgten die vier Verbundpartner folgende Ziele: Entwicklung und Erprobung hybrider Bildungsformate mit gemeinsamen Lernorten, Erstellung eines neuen Konzeptes hybrider Bildung für Berufsschüler mit Hochschulzugangsberechtigung, Stärkung des internationalen Denkens der Akteure, Stärkung des Innovations- und Gründergeistes sowie Entwicklung einer digitalen Austauschplattform zur Vernetzung der Partner. Das Projekt umfasste sechs Teilprojekte, die gemeinsame Lernformate etablierten sowie Lernorte öffneten (TP 1), flexible Bildungskarrieren ermöglichten (TP 2), die Berufsbildung internationalisierten (TP 3), gemeinsames Gründen und Innovieren förderten (TP 4), Dienstleistungen für die Region OWL entwickelten (TP 5) und Wissenschaft sowie Transfer stärkten (TP 6).}}, author = {{Claes, Svenja and Timmermann, Heike and Thiel, Marc and Otto, Claudia and Rempe, Markus}}, pages = {{22}}, publisher = {{Technische Informationsbibliothek}}, title = {{{Bildungsbrücken OWL (BB OWL). Förderrichtlinien zur Durchführung des Bundeswettbewerbs "Zukunft gestalten - Innovationen für eine exzellente berufliche Bildung (InnoVET)"}}}, doi = {{10.34657/30006}}, year = {{2025}}, } @misc{13480, author = {{Frühwald-König, Katja}}, location = {{Rheda-Wiedenbrück}}, title = {{{Holzwerkstoffe aus Monokotyledonen - Potenziale, Herausforderungen und Zukunftsperspektiven}}}, year = {{2025}}, } @misc{13501, author = {{Upmann, Matthias and Harner, Johann}}, location = {{Bonn}}, title = {{{Nitritreduktion in Fleischwaren – gesetzliche Anforderungen und praxisnahe Lösungen}}}, year = {{2025}}, } @misc{13502, author = {{Upmann, Matthias}}, location = {{Gerlingen }}, title = {{{Frühzeitige Zartheitserkennung des Roastbeefs - Realität oder Fiktion?}}}, year = {{2025}}, } @misc{13503, author = {{Upmann, Matthias}}, location = {{Rennes (F)}}, title = {{{Detecting pig carcass contamination by video image analysis. Paving the way for target-oriented decontamination steps.}}}, year = {{2025}}, } @misc{13504, author = {{Upmann, Matthias}}, location = {{Lemgo}}, title = {{{Einfrieren von Fleisch – Qualitätserhalt oder Qualitätsverlust?}}}, year = {{2025}}, } @misc{13505, author = {{Tholen, Janna and Upmann, Matthias}}, location = {{Hannover }}, title = {{{Anwendung von KI am Schlachthof: Erkennung von Kontaminationen bei der Schweineschlachtung im Rahmen des KontRed-Verbundes}}}, year = {{2025}}, } @misc{13506, abstract = {{The aim of this study was to evaluate the efficiency of a steam-vacuum treatment of the surface of industrially slaughtered pig carcasses after evisceration but before chilling. Both the reduction of the microbial load after contamination with stomach contents, bile, or tubular rail fat and color changes of the carcass surface were investigated. Up to 25 samples per type of contamination were examined within an experimental setting under regular slaughterhouse conditions. The steam-vacuum treatment was applied on the approximately 30 cm long carcass rind between 2 and 8 s. This led to a statistically significant reduction (p < 0.0001) in total bacterial counts of up to 2 log10 levels to values near or below the lower detection limit for all types of contamination considered (stomach contents (−1.2 log CFU/cm2) (p < 0.0001), bile (−1.6 log CFU/cm2) (p < 0.0001) and tubular fat (−2.2 log CFU/cm2) (p < 0.0001). Noncontaminated, nontreated carcasses underwent a color change of ΔE = 2.5 ± 1.2 (ΔE represents the overall color difference, where higher values indicate more noticeable color changes.) during storage of the carcass surface at 2 °C after 24 and 48 h. After steam-vacuum treatment, no statistically significant color differences (24 h storage: 2 s p = 0.7403, 4 s p = 0.8769, 6 s p = 0.1755, 8 s p = 0.0971; 48 h storage: 2 s p = 0.9710, 4 s p = 0.9967, 6 s p = 0.5648, 8 s p = 0.5360) were observed compared to untreated carcasses after storage (ΔE = 3.2 ± 1.3). Stomach content could be completely removed by the steam-vacuum treatment without affecting the color (48 h storage: 2 s p = 0.9704, 4 s p = 1.000, 6 s p = 1.000, 8 s p = 0.9996) compared with the control group. The color changes caused by bile (ΔE = 12.9 ± 4.12; p < 0.0001) and tubular rail fat (ΔE = 8 ± 3; p < 0.0001) could not be reversed completely by vacuum steam treatment. After contamination and decontamination, significant color differences remained in the b* (yellowness) range for bile (p < 0.0001) and in all three color ranges for tubular rail fat (p < 0.0001). Overall, steam-vacuum treatment appears to be a suitable microbiological decontamination method, as the microbial levels after treatment were below the detection limit.}}, author = {{Tholen, Janna and Kirse, Alina and von Haacke, Henrike and Kreienbrock, Lothar and Strotkötter, Lea and Althoff, Gereon Schulze and Upmann, Matthias}}, booktitle = {{Journal of Food Protection}}, issn = {{1944-9097}}, keywords = {{Bile contamination, Fecal contamination, Pig carcass color, Pig carcass decontamination, Slaughter hygiene, Tubular rail fat contamination}}, number = {{2}}, publisher = {{IAFP}}, title = {{{Steam-Vacuum Treatment of Pig Carcass Surfaces}}}, doi = {{10.1016/j.jfp.2025.100687}}, volume = {{89}}, year = {{2025}}, } @misc{13507, abstract = {{Im Rahmen der Podiumsdiskussion wurden 32 aktuelle Fragestellungen aus der lebensmittelrechtlichen Praxis erörtert, deren Beantwortung in dieser und der vorherigen und den folgenden Ausgaben der FLEISCHWIRTSCHAFT zusammenfassend dargestellt sind. }}, author = {{Upmann, Matthias and Weyland, Gerd}}, booktitle = {{Fleischwirtschaft}}, issn = {{0015-363X}}, location = {{Lemgo}}, number = {{12}}, pages = {{36--39}}, publisher = {{dfv-Mediengruppe, Dt. Fachverl.}}, title = {{{Was ist erlaubt, was verboten? 20. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - 2. Teil}}}, volume = {{105}}, year = {{2025}}, } @misc{13509, abstract = {{Im Rahmen der Podiumsdiskussion wurden 32 aktuelle Fragestellungen aus der lebensmittelrechtlichen Praxis erörtert, deren Beantwortung in dieser und den folgenden Ausgaben der FLEISCHWIRTSCHAFT zusammenfassend dargestellt wird. }}, author = {{Upmann, Matthias and Weyland, Gerd}}, booktitle = {{Fleischwirtschaft}}, issn = {{0015-363X}}, location = {{Lemgo}}, number = {{11}}, pages = {{46--47}}, publisher = {{dfv-Mediengruppe, Dt. Fachverl. }}, title = {{{Was ist erlaubt, was verboten? 20. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost – 1. Teil}}}, volume = {{105}}, year = {{2025}}, } @misc{13519, abstract = {{Der vorliegende Band 50 der Schriftenreihe WASSER • ABWASSER • UMWELT gibt die Ergebnisse der vierten und letzten Phase eines durch das Hessische Ministerium für Landwirtschaft und Umwelt, Weinbau, Forsten, Jagd und Heimat; HMLU (bei Projektbeginn: Hessisches Ministerium für Umwelt, Klimaschutz, Landwirtschaft und Verbraucherschutz (HMUKLV)) seit 2002 geförderten Vorhabens wieder, in dessen Rahmen das Retentionsbodenfilter-Verfahren unter diversen verfahrenstechnischen und leistungsbezogenen Aspekten untersucht wurde. Diese beinhalteten neben der Reinigungsleistung bezüglich der Kohlenstoffverbindungen weitere Betrachtungen zum Nährstoffrückhalt von Stickstoff und Phosphor, zu den Auswirkung solcher Anlagen auf das Gewässer insgesamt, zur Möglichkeit der Hygienisierung sowie zum Schwermetallrückhalt. Zugehörige Forschungsberichte und Promotionsarbeiten sind als Band 29, Band 30, Band 33 und Band 35 in dieser Schriftenreihe veröffentlicht worden. Außerdem wurden gegen Ende der dritten Untersuchungsphase kleinmaßstäbliche Untersuchungen zum Betrieb einer nachgeschalteten Phosphor-Sorptionsstufe durchgeführt. Die Ergebnisse waren sehr vielversprechend, auch im Hinblick auf den Rückhalt von Schwermetallen. Als Konsequenz hieraus ergab sich, die Verfahrenskonzeption einer nachgeschalteten Sorptionsstufe in einer nachfolgenden Untersuchungsphase großtechnisch umzusetzen und Planung, Bemessung, Inbetriebnahme und die erste Betriebszeit intensiv wissenschaftlich zu begleiten. Daher wurde in der abschließenden vierten Untersuchungsphase nun die Leistungsfähigkeit der neuartigen Kombination eines nicht meliorierten Retentionsbodenfilters mit einer nachgeschalteten Sorptionsstufe im großtechnischen Maßstab untersucht, wobei neben den betrieblichen Aspekten der Fokus auf dem Rückhalt von Phosphor sowie Schwermetallen und zusätzlich auch Spurenstoffen im Gesamtsystem lag. Als Standort dieser Untersuchungen, die von 2014 bis 2017 durchgeführt wurden, wurde die Retentionsbodenfilteranlage RBF Korbach (am Standort der alten Kläranlage Korbach), betrieben von der Hansestadt Korbach, ausgewählt. Hier hatten frühere Erhebungen dringenden Handlungsbedarf zur gezielten und dauerhaften Phosphorreduzierung im Bereich der Mischwasserentlastungen gezeigt.}}, author = {{Schier, Wernfried and Romaker, Jan and Felmeden, Jörg and Frechen, Franz-Bernd and Morck, Tobias}}, isbn = {{978-3-7376-0965-4}}, keywords = {{620 'Ingenieurwissenschaften und zugeordnete Tätigkeiten' Bodenfilter Sorption Mischwasser Phosphatelimination Mischsystementwässerung weitergehende Mischwasserbehandlung Retentionsbodenfilter Phosphorelimination nachgeschaltete Phosphoradsorption}}, pages = {{294}}, publisher = {{kassel university press}}, title = {{{Retentionsbodenfilter in Hessen (Phase 4) : Großtechnische Umsetzung einer nachgeschalteten Sorptionsstufe zum Rückhalt von Phosphor, Schwermetallen und Spurenstoffen am RBF Korbach}}}, doi = {{10.17170/kobra-2025111211637}}, volume = {{50}}, year = {{2025}}, } @misc{13524, abstract = {{m Merkblatt DWA-M 187 werden Empfehlungen für die folgenden Sonderanwendungen erarbeitet: Anlagen zum langfristigen Phosphorrückhalt, Anlagen zur Spurenstoffelimination, Anlagen zum gezielten Rückhalt von Mikroorganismen, Anlagen zur Behandlung von Abflüssen mit hohen Konzentrationen von partikulärer und gelöster organischer Substanz, dezentrale Klein-Retentionsbodenfilterbecken.}}, author = {{Fuchs, Stefan and Tondera, Katharina and Anselm, Jörn and Born, Winfried and Christoffels, Ekkehard and Dahmen, Heinrich and Felmeden, Jörg and Joswig, Kay and Kerpen, Thomas and Knüpper, Holger and Münter, Franz and Nowak, Jens and Rüter, Johannes and Ruppelt, Jan and Schwefringhaus, Martin and Waldhoff, Axel}}, isbn = {{978-3-96862-853-0}}, pages = {{44}}, publisher = {{DWA}}, title = {{{Merkblatt DWA-M 187 Retentionsbodenfilteranlagen – Sonderanwendungen, Hinweise und Beispiele }}}, volume = {{187}}, year = {{2025}}, } @misc{13529, abstract = {{The proliferation of misinformation is one of the most pressing challenges in today’s digital landscape, due to its far-reaching implications for public health, economic stability, trust in governmental institutions, and societal cohesion. Despite efforts to regulate online platforms and limit the spread of misinformation, many individuals are left behind because of their low digital literacy, level of education, and other contributing factors. In this context, we explore the use of Large Language Models (LLMs) to identify misinformation and we evaluate the capabilities of GPT-4.1-mini, as a representative example of these models. We then discuss how LLMs can help empower users to critically create and share information, thereby fostering more resilient online communities. We also present a set of possible interaction patterns for content creation and moderation.}}, author = {{Franco, Mirko and Grimm, Valentin and Herder, Eelco}}, booktitle = {{Proceedings of the 2025 International Conference on Information Technology for Social Good}}, editor = {{Marquez-Barja, Johann and Bujari, Armir and Slamnik-Kriještorac, Nina and Sabbioni, Andrea}}, isbn = {{979-8-4007-2089-5}}, keywords = {{misinformation, fake news, large language models, online social networks}}, location = {{Antwerp, Belgium}}, pages = {{244 -- 252}}, publisher = {{ACM}}, title = {{{Preventing Accidental Sharing of Misinformation Using Large Language Models}}}, doi = {{10.1145/3748699.3749798}}, year = {{2025}}, } @misc{13538, abstract = {{Effective multifunctional landscape management requires innovative governance approaches that foster collaboration between multiple stakeholders and actors. Governance, in this context, refers to the dynamic interplay of stakeholders working together to achieve shared goals through the exchange of knowledge, resources, and the establishment of mutually agreed-upon rules. This presentation will explore participatory and governance strategies for multifunctional landscape management. Drawing on insights from eleven cased studies in six different countries of the Central European Alpine Region, namely in Austria, France, Germany, Italy, Slovenia, and Switzerland, this talk will synthesizes innovative governance practices and highlights key mechanisms that enable multifunctional landscape management.}}, author = {{Rolf, Werner and Hübner, Rico}}, booktitle = {{IALE 2025 European Landscape Ecology Congress, Landscape Perspectives in a Rapidly Changing World : Book of Abstracts}}, editor = {{Lieskovský, Juraj and Baránková, Zuzana and Miklósová, Viktória and Hilbert, Hubert and Ponecová, Zuzana}}, isbn = {{978-80-89325-34-4}}, location = {{Bratislava}}, pages = {{231}}, publisher = {{Institute of Landscape Ecology, Slovak Academy of Sciences }}, title = {{{Multifunctional landscape management – a governance perspective}}}, doi = {{10.31577/2025.9788089325344}}, year = {{2025}}, } @misc{13539, abstract = {{Landscape ecology is a well-established field that explores spatial patterns, ecological processes, and their interactions across scales. Its interdisciplinary nature and relevance to environmental management, spatial planning, and conservation have led to its widespread inclusion in research and university curricula. However, there is limited research on what is actually taught in landscape ecology courses and how well students are being prepared to address current global challenges. Moreover, pedagogical practices, including teaching methods and their alignment with educational best practices, remain underexplored. To address this gap, we conducted a global survey to examine how landscape ecology is taught in higher education across different regions. The study investigates the content, teaching strategies, and modes of instruction employed, with a focus on how students engage with landscape ecological thinking and apply it in real-world contexts. We identify commonly used teaching methods, evaluate their alignment with established pedagogical principles, and highlight opportunities for innovation. Special attention is given to the integration of active learning approaches—such as field-based learning, spatial modelling, and interdisciplinary collaboration—and their role in shaping the next generation of landscape ecologists.}}, author = {{Echeverria, Cristian and Spyra, Marcin and Rolf, Werner}}, booktitle = {{IALE 2025 European Landscape Ecology Congress Landscape Perspectives in a Rapidly Changing World : Book of Abstracts}}, editor = {{Lieskovský, Juraj and Baránková, Zuzana and Miklósová, Viktória and Hilbert, Hubert and Ponecová, Zuzana }}, location = {{Bratislava, Slovakia}}, pages = {{491}}, publisher = {{Institute of Landscape Ecology, Slovak Academy of Sciences}}, title = {{{Teaching Landscape Ecology in a Changing World: Insights from a global survey}}}, doi = {{https://doi.org/10.31577/2025.9788089325344}}, year = {{2025}}, } @misc{13540, abstract = {{The IALE European Landscape Ecology Congress, held every four years, is a key event for the European landscape ecology community, bringing together researchers, practitioners, policymakers, students, and stakeholders for knowledge exchange and collaboration. The 2025 congress in Bratislava was especially significant, taking place near Piešťany where IALE was founded in 1982, symbolizing the organization’s evolution from Cold War-era cooperation to a global network. The 2025 meeting continued this legacy by promoting dialogue and action. This editorial examines the 2025 congress, from IALE’s founding in Piešťany to its current role addressing environmental and societal crises. We review its historical context, in particular Eastern European contributions in former Czechoslovakia, and the ongoing influence of pioneers like Prof. Milan Ružička. We then analyze congress participants and their contributions using bibliometric analysis to reveal patterns and international trends. Finally, we reflect on the 2025 issue of Landscape Online, exploring how its publications align with and expand upon the key discussions and innovations that defined this year’s European Congress.}}, author = {{Rolf, Werner and Grădinaru, Simona R. and Halada, Ľuboš and Miklósová, Viktória and Raniak, Andrej and Schirpke, Uta}}, booktitle = {{Landscape Online}}, issn = {{1865-1542}}, keywords = {{Landscape Ecology, Landscape Research, Land Sciences, Landscape Drivers, Landscape Change, IALE, Europe}}, publisher = {{IALE-D }}, title = {{{From Drivers of Landscape Change to Pathways for Action in Landscape Ecology: Key Insights from IALE 2025 Bratislava in a Rapidly Changing World}}}, doi = {{10.3097/lo.2025.1145}}, volume = {{100}}, year = {{2025}}, } @misc{13543, abstract = {{Neue Sonderausstellung “A KInd of Art. Künstliche Intelligenz trifft (Weser-)Renaissance” im Weserrenaissance-Museum Schloss Brake Was haben das schillernde Zeitalter der (Weser-)Renaissance und der Bereich der künstlichen Intelligenz bloß miteinander zu tun? Erstaunlich viel! Das innovative Weserrenaissance-Museum Schloss Brake zeigt in seiner topaktuellen Sonderausstellung “A KInd of Art. Künstliche Intelligenz trifft (Weser-)Renaissance” überraschende Parallelen und faszinierende Zusammenhänge auf, die kaum jemand vermuten würde. “Zusammen mit der TH OWL und Fraunhofer IOSB-INA wagen wir den Sprung von der Zwei- in die Dreidimensionalität und zeigen Deutschlands erste Museumsausstellung mit KI-Skulpturen, die aus historischen Exponaten entwickelt wurden. Diese weisen allesamt einen unmittelbaren Bezug zur (Weser-)Renaissance auf und kombinieren die Vergangenheit und die Zukunft aufs Vortrefflichste miteinander”, sagt Museumsleiterin Silvia Herrmann. Die KI-Skulpturen stammen dabei allesamt aus einem Master-Kurs-Projekt des Fachbereiches Medienproduktion unter der Leitung von Prof. Anke Stache. “Hätten Sie beispielsweise gewusst, dass das weltberühmte Universalgenie Leonardo da Vinci bereits vor mehr als 500 Jahren einen Automaten entwickelt hat? Es ist uns gelungen, ein nachgebautes und bewegliches Modell seines ‘Roboter-Ritters’ als Leihgabe für die Ausstellung zu gewinnen”, sagt die Kuratorin Dr. Susanne Hilker. Passend dazu treffen Leonardo da Vinci und der Roboter Ina in Form eines Comics fiktiv aufeinander und unterhalten sich über die Innovationen ihrer jeweiligen Zeit. Zu bestaunen sind auch zahlreiche kunsthistorische Originale wie beispielsweise “Minerva und die Musen auf dem Helikon” von Hans Rottenhammer oder “Die Tempelreinigung” von Hans und Paul Vredeman de Vries. Auch hierbei gibt es spannende Verbindungen zum Gebiet der künstlichen Intelligenz. Freuen können sich die Besucher auch auf Mitmachstationen wie eine interaktive Klanginstallation, ein Ergometer, mit dessen Hilfe sie herausfinden können, wie viel Energie die künstliche Intelligenz für ihre Prozesse benötigt, und auf eine Fotobox. Apropos Fotos: Im Rahmen dieser Ausstellung stellt das Museum auch originelle Kunstdoppelgänger aus. Darüber hinaus sind im “Freiraum” die 20 besten KI-generierten Bilder zu sehen, die im Rahmen eines Wettbewerbs des CIIT (Centrum Industrial IT) entstanden sind. Schlussendlich wird den Besuchern zur Abstimmung die Frage aller Fragen gestellt: Kann KI Kunst? “Wir möchten mit dieser Sonderausstellung zeigen, wie innovativ, interessant und relevant Museen sein können. Ganz bewusst greifen wir dieses topaktuelle Thema auf. Wir möchten in puncto Künstliche Intelligenz zum Nachdenken und zur Diskussion anregen. Darüber hinaus schlagen wir eine Brücke zwischen Vergangenheit, Gegenwart und Zukunft und eröffnen neue Perspektiven”, sagt Silvia Herrmann. Passend zur neuen Sonderausstellung bietet das Weserrenaissance-Museum Schloss Brake kurzweilige Mitmachprogramme für Kindergärten und Schulen an. Des Weiteren stehen zahlreiche Veranstaltungen mit Bezug zum Thema KI auf dem Programm. Alle Infos unter www.museum-schloss-brake.de Und wer von künstlicher Intelligenz nicht genug bekommen kann, macht einen Ausflug zum Kooperationspartner, der “Eulenburg”. Das Universitäts- und Stadtmuseum Rinteln zeigt ebenfalls eine Ausstellung mit KI-generierten Skulpturen. Die Ausstellung wird gefördert vom Ministerium für Kultur und Wissenschaft des Landes NRW und dem Regionalen Kultur Programm NRW. Die Ausstellung findet in Kooperation mit folgenden Partnern statt: Fraunhofer IOSB-INA, Technische Hochschule OWL, Kl Akademie OWL, inIT TH OWL, Bundesministerium für Forschung, Technologie und Raumfahrt, KreativInstitut.OWL, Trinnovation OWL, Hochschule für Musik Detmold, Fachbereich Ingenieurwissenschaften und Mathematik der Hochschule Bielefeld HSBI, LWL Museum Ziegelei Lage und wird unterstützt von den „Frauen für Lemgo”. Das Weserrenaissance-Museum Schloss Brake dankt auch seinem Träger, dem Landesverband Lippe, den Mitfinanziers, dem LWL sowie der Alten Hansestadt Lemgo, sowie den Sponsoren, der Lippischen Landesbrandversicherung AG und der Sparkasse Lemgo, für die Unterstützung! Der Eintritt in die neue Sonderausstellung im Weserrenaissance-Museum Schloss Brake beträgt 7 Euro. Kinder und Jugendliche bis 18 Jahre haben freien Eintritt. Die Ausstellung kann zwischen dem 16. September 2025 und 01. Februar 2026 dienstags bis sonntags von 10 bis 18 Uhr besichtigt werden. (https://museum-schloss-brake.de/sonderausstellung/)}}, author = {{Lange-Hegermann, Markus}}, keywords = {{KI, Kunst, Weserrenaissance}}, publisher = {{Landesverband Lippe}}, title = {{{A KInd of Art}}}, year = {{2025}}, } @misc{13556, abstract = {{BackgroundEating disorders (EDs) affect individuals across all genders, but men remain underrepresented in ED treatment settings. Stigma related to EDs in men may impede help-seeking, particularly for symptoms that deviate from traditional masculine ideals. This study investigates whether stigma-related perceptions of EDs in men specifically moderate the association between disordered eating symptoms and help-seeking intentions in men, i.e., whether there is a gender-specific component of ED stigma.MethodsIn a cross-sectional survey, n = 242 men and n = 249 women completed questionnaires on various disordered eating symptoms ("traditional" thinness-oriented, muscularity-oriented, orthorexic, and avoidant/restrictive eating behaviors), stigma-related perceptions of EDs in men, and help-seeking intentions. Moderator analyses were conducted by gender to explore interactions between symptom severity and stigma in predicting help-seeking intentions.ResultsHelp-seeking intentions increased with the severity of disordered eating symptoms in both men and women, except for avoidant/restrictive eating behavior in both genders and muscularity-oriented symptoms in men. Stigma-related perceptions of EDs in men moderated the association between symptoms and help-seeking intentions in men, which was exclusively the case for "feminized" ED symptoms (i.e., thinness and weight concerns). No moderation effects were observed for other symptom domains or among women.ConclusionsResults support the notion of a gender-specific role of stigma in men's help-seeking behaviors for EDs. Such stigma, which seems to be related to "feminized" ED symptoms, may contribute to men's reluctance to seek help for EDs. These findings emphasize the need for interventions tailored to reduce stigma, particularly regarding men's experiences of EDs, to support equal access to healthcare.}}, author = {{Lehe, MS and Halbeisen, Georg and Juergensen, VC and Sabel, L and Steins-Loeber, S and Paslakis, G}}, booktitle = {{Journal of Eating Disorders}}, issn = {{2050-2974}}, number = {{1}}, publisher = {{BioMed Central}}, title = {{{Boys don't try? Gendered stigma specifically reduces help-seeking for disordered eating in men, but not women}}}, volume = {{13}}, year = {{2025}}, } @misc{13558, abstract = {{Introduction Weight restoration is a primary goal in anorexia nervosa (AN) treatment. Recent studies suggest that addressing physical activity urges in patients with AN is a promising target to facilitate weight restoration. This trial will evaluate the feasibility of a virtual reality (VR)-based intervention as an add-on treatment to psychotherapy to improve activity urges and, consequently, initial treatment responses on core outcomes as targeted per AN treatment guidelines.Methods and analysis This single-centre feasibility trial adopts the single-blind, two-arm design and outcome measures of an intended full-scale randomised controlled trial (RCT) in order to establish that all necessary trial components work together as intended. It will evaluate feasibility as the primary endpoint and compare changes in ratings of the urge to be active between patients with AN randomly assigned to receiving VR intervention sessions and patients with AN in a control procedure. The feasibility of the full-scale RCT will depend on whether patients (1) will evaluate the experience as acceptable, (2) tolerate VR side effects and (3) will adhere to the intended intervention schedule. We define a set of three-tiered, formal progression criteria and employ a 'traffic light system' demarcating go (green), amend (amber) and stop (red) signals for advancing to the full-scale RCT.Ethics and dissemination The study was approved by the ethics committee of the Ruhr University Bochum's Medical Faculty at Campus East-Westphalia (AZ 2024-1296, 9 December 2024). Patients have to provide written consent before taking part in the study. The findings will be published with open access.Trial registration number DRKS00035681, German Clinical Trials Register.}}, author = {{Halbeisen, Georg and Timmesfeld, N and Paslakis, G}}, booktitle = {{BMJ Open}}, issn = {{2044-6055}}, number = {{1}}, publisher = {{British Medical Journal Publishing Group}}, title = {{{Reducing the urge to be physically active in patients with anorexia nervosa through virtual reality: protocol for a randomised-controlled feasibility trial}}}, doi = {{10.1136/bmjopen-2024-097886 }}, volume = {{15}}, year = {{2025}}, } @misc{13560, abstract = {{Introduction Eating disorders (EDs) are a significant public health concern, yet men remain underrepresented in research and care, partly due to stigmatization. This stigmatization contributes to reduced help-seeking and recognition of ED symptoms in men. To address this, targeted interventions for healthcare professionals are needed. The iSMEsH intervention aims to sensitize general practitioners (GPs) in Germany to EDs in men, impart relevant knowledge and skills, and counter the perception of EDs as "women's diseases".Methods We will evaluate the iSMEsH intervention regarding its effects on biased attitudes, knowledge, and self-efficacy among GPs. A sequential explanatory mixed-methods design (QUAN -> qual) will be applied in three steps: (1) pre-implementation focus groups and a panel discussion with individuals with lived ED experience and GPs to design the intervention, (2) conduction of a randomized, wait-list controlled trial of the online training trial with GPs and medical students, and (3) post-implementation qualitative interviews with GPs. Quantitative data (step 2) will be analyzed using mixed-measures ANOVAs and contrast analyses (per-protocol) as well as corresponding 2 x 3 linear mixed models with fixed and random effects (intention-to-treat). Qualitative data from step 3 will be analyzed using thematic analysis as outlined by Braun and Clarke (2006). Ethical approval was granted by the Ruhr-University Bochum Ethics Committee (AZ 2023-1106). Participants will provide written or digital informed consent.Discussion The intervention seeks to reduce stigma against men with EDs in primary care by improving GPs' and medical students' knowledge, attitudes, and self-efficacy. Strengths include the comprehensive mixed-methods approach and involvement of people with lived experience. Limitations are reliance on self-report and short-/intermediate-term outcomes. If effective, iSMEsH may offer a foundation for future stigma-reduction strategies in healthcare.}}, author = {{Lehe, MS and Halbeisen, Georg and Paslakis, G}}, booktitle = {{PLOS ONE}}, issn = {{1932-6203}}, number = {{10}}, publisher = {{Public Library of Science (PLOS)}}, title = {{{Intervention against the stigmatization of men with eating disorders in primary care (iSMEsH): Protocol for a randomized mixed-methods evaluation trial}}}, doi = {{10.1371/journal.pone.0333997}}, volume = {{20}}, year = {{2025}}, } @misc{13561, abstract = {{Recovery and clinical outcomes following organ transplantation may be negatively influenced by psychological distress. Limited reports from recipients indicate that thoughts and feelings related to the donor/transplanted organ - referred to as donor and donation images (DDI) - may be a source of such distress. The term DDI encompasses all thoughts and emotions that organ recipients associate with the donor or the donated organ. However, empirical knowledge of DDI remains limited. This quantitative survey involving 407 participants represents the first and largest study to quantitatively examine DDI in patients after heart transplantation (HTX). The results revealed a very high prevalence of DDI (91%), with occurrences reported intermittently and often clustered around the time of transplantation, both before and after HTX. Psychological distress predicted the occurrence of DDI before and after HTX and almost all emotions experienced and reported pre-HTX were associated with higher odds of pre-HTX DDI, suggesting it may be a concurrent phenomenon of overall emotional activation. Due to the involvement of emotions associated with uncertainty and low personal control, along with high situational control, DDI may be a part of coping. Some reported avoiding DDI suggesting that, sometimes, they might also represent a stressor. Future studies should further investigate the effects of DDI, including its impact on transplant outcome.}}, author = {{Laskowski, NM and Halbeisen, Georg and Wahlers, L and Tigges-Limmer, K and Paslakis, G}}, booktitle = {{Scientific Reports}}, issn = {{2045-2322}}, number = {{1}}, publisher = {{Nature Publishing Group UK}}, title = {{{A large cross-sectional study on the prevalence and predictors of donor and donation images in patients after heart transplantation}}}, doi = {{10.1038/s41598-025-07317-7}}, volume = {{15}}, year = {{2025}}, } @misc{13562, abstract = {{Introduction Randomized controlled trials require diverse patient groups to ensure broad applicability of results. However, gender minorities are often not included, which affects the generalizability and equity of healthcare outcomes. Inclusive research must consider the diversity of sex and gender to eliminate inequalities and improve health outcomes.Methods A two-stage expert survey was conducted using a self-developed questionnaire in which the constructs of sex, gender, and gender expression were considered. Experts rated the importance and practicality of assessing these concepts in clinical trials and evaluated terms for suitability and comprehension. In addition, existing definitions were refined. Consensus was defined as 70% agreement or disagreement.Results 14 out of 17 participating experts agreed on the importance to independently assess sex assigned at birth, and 9 out of 16 emphasized this for gender identity in clinical trials. Sex should be assessed with "Please specify your sex assigned at birth" and the answer categories "female", "male", "intersex". Gender identity should be assessed with "I identify as & mldr;" and the answer categories "woman", "man", "nonbinary", "trans woman", "trans man", "genderqueer", "genderfluid", "agender", "two spirit". Assessment of gender expression depends on the research question and may not be relevant for every study.Discussion Our findings emphasize inclusivity by providing multiple gender options and improve data accuracy by allowing individuals to accurately report their gender identity. The results emphasize the importance of distinguishing between sex assigned at birth, gender identity, and gender expression in research. This ensures that gender diversity is accurately represented and considered, improving the relevance and inclusivity of clinical trials.}}, author = {{Hambruch, Hannah R and Laskowski, Nora M. and Juster, Robert-Paul and Halbeisen, Georg and Paslakis, Georgios}}, booktitle = {{Frontiers in Psychiatry}}, issn = {{1664-0640}}, publisher = {{Frontiers}}, title = {{{An expert perspective on diversity-oriented standards for assessing sex and gender in clinical research}}}, doi = {{10.3389/fpsyt.2024.1448487}}, volume = {{15}}, year = {{2025}}, } @misc{13566, abstract = {{BackgroundFeeding and eating disorders lead to serious health impairments. Boys and men are increasingly affected and may account for a fourth of clinical cases. Current evidence suggests that symptoms and health care needs differ between men and women (e.g., related to muscularity concerns), and that men delay seeking treatment due to the traditional understanding of eating disorders as "women's disease". Treatment guidelines recommend psychotherapy as first-line intervention, but potential gender differences in treatment responses have not been considered. This is due to the lack of systematic evaluations of gender differences related to treatment outcomes for feeding and eating disorders.MethodsThis systematic review with Individual Patient Data Meta-Analysis (IPDMA) will compare the effects of psychotherapeutic interventions for feeding and eating disorders between gender groups. The focus of the analysis is on eating disorders-related psychopathology. For this purpose, randomized-controlled clinical studies will be identified in scientific databases and examined for their methodological quality. Primary investigators will be contacted to deliver anonymized data of their studies. Study results will then be summarized and compared in a two-staged IPDMA. Gender groups will be compared regarding different types of interventions and further relevant intervention characteristics, as identified by men with lived experience.DiscussionThe results will help to formulate treatment recommendations and identify the treatment contexts that are associated with unfavorable outcomes related to patient gender. This may fuel efforts of adapting established interventions to best meet the health care needs of men and women in the context of eating disorders.Systematic review registrationPROSPERO CRD42022372712.}}, author = {{Halbeisen, Georg and Timmesfeld, N and Paslakis, G}}, booktitle = {{Systematic Reviews}}, issn = {{2046-4053}}, number = {{1}}, publisher = {{BioMed Central}}, title = {{{Do we need to "man up" feeding and eating disorders treatments? Protocol for a systematic review and individual patient data meta-analysis of gender effects on intervention outcomes}}}, doi = {{10.1186/s13643-025-03041-5}}, volume = {{15}}, year = {{2025}}, } @misc{13567, abstract = {{This study examines the role of gender role orientation in shaping body ideals and its impact on disordered eating and muscle dysmorphic symptoms in women. We explore how self-perceived Gender Roles regarding Masculinity and Femininity relate to thinness and muscularity ideals and whether these body ideals mediate the relationship between Gender Roles and disordered eating behaviors. A cross-sectional online survey was conducted with 304 adult women. Participants completed measures assessing gender role orientation, body ideals, disordered eating symptoms, and muscle dysmorphic symptoms. Mediation analyses were performed. Self-reported Masculinity was associated with stronger muscularity ideals, while Femininity predicted a weaker drive for muscularity. The mediation analysis showed that muscularity ideals completely mediated the relationship between self-perceived Masculinity or Femininity and disordered eating symptoms. The study highlights the importance of considering Gender Roles and muscularity ideals when examining the development of body image concerns and disordered eating behaviors. The findings suggest that promoting flexible gender role perceptions could be an effective focus for public health interventions aimed at preventing and reducing disordered eating. Future research should further investigate these relationships in clinical populations and explore additional mediators.Trial registration: This study was preregistered on the Open Science Framework (OSF, https//osf.io/efn4v May 6, 2024).}}, author = {{Brandt, G and Pahlenkemper, M and Jürgensen, VC and Lehe, MS and Laskowski, NM and Halbeisen, Georg and Paslakis, G}}, booktitle = {{Scientific Reports}}, issn = {{2045-2322}}, number = {{1}}, publisher = {{Nature Publishing Group UK}}, title = {{{The impact of masculinity and femininity on disordered eating symptoms and the mediating role of muscularity ideals}}}, doi = {{10.1038/s41598-025-19246-6}}, volume = {{15}}, year = {{2025}}, } @misc{13572, abstract = {{BackgroundRelative deprivation (RD), the belief of being unfairly disadvantaged compared to a standard, has frequently been linked to aggressive behaviors. This study explored how affective experiences are associated with the perception of unfairness (i.e., RD) and, thus, influence aggressive behavior indirectly.MethodsN = 184 participants were randomly assigned to one of two conditions of a game task, in which they experienced either deprivation or no deprivation as the difference between own rewards and the rewards of a fictitious other player. We assessed the subjective perception of RD and affective experiences attributed to the game before measuring aggressive behavior towards the other player in a point subtraction task.ResultsSequential mediation analysis suggested that increases in aggressive affect and decreases in positive affect could be linked to perceiving the game as more unfair for deprived participants, which in turn increased rates of aggressive behavior.ConclusionsAdding to the existing literature, these findings suggest that RD could not only lead to aggression through an affective route but that affective experiences potentially alter perceptions of RD and thus aggressive behavior indirectly.}}, author = {{Kassab, YJ and Halbeisen, Georg and Walther, E}}, booktitle = {{BMC Psychology}}, issn = {{2050-7283}}, number = {{1}}, publisher = {{BioMed Central}}, title = {{{The unfairness we feel: How positive and aggressive affect could shape relative deprivation and aggression}}}, doi = {{10.1186/s40359-025-02732-x}}, volume = {{13}}, year = {{2025}}, } @misc{13614, abstract = {{This study examined the role of muscularity concerns in eating disorder (ED) symptoms among a sample of women. We expanded on previous research by exploring a broader range of ED symptoms, including orthorexia (ON) and avoidant/restrictive food intake disorder (ARFID). Using network analysis, we analysed data from 308 adult women (18 years or older) who completed muscularity, disordered eating, and sociodemographic assessments. Our findings revealed five interconnected symptom communities reflecting traditional ED symptoms, such as eating concerns and shape and weight overvaluation. Notably, muscularity concerns emerged as a distinct community, emphasising their relevance to ED symptoms in women. Additionally, we identified selective eating tendencies and compulsive healthy eating. Highly central symptoms were rumination about healthy eating, fear and guilt over unhealthy eating, body‐related embarrassment, and muscularity concerns (wishing to be heavier, wishing for heavier arms). These results suggest that muscularity concerns could constitute a uniquely identifiable and central diagnostic target for body image concerns and disordered eating in women.}}, author = {{Jürgensen, Vanessa and Halbeisen, Georg and Lehe, Martin S. and Paslakis, Georgios}}, booktitle = {{European Eating Disorders Review}}, issn = {{1099-0968}}, keywords = {{body dysmorphia, drive for muscularity, eating disorders, psychotherapy, thinness ideal}}, number = {{5}}, pages = {{864--878}}, publisher = {{Wiley}}, title = {{{Muscularity Concerns and Disordered Eating Symptoms in Adult Women: A Network Analysis}}}, doi = {{10.1002/erv.3192}}, volume = {{33}}, year = {{2025}}, } @misc{13615, abstract = {{Autistic traits, such as sensory sensitivities and rigid routines, have been linked to body dissatisfaction (BD) and eating disorders (EDs). However, the interplay between autistic traits, fat- and muscularity-related BD, and disordered eating remains underexplored. This cross-sectional study examined the relationships between autistic traits, BD, and disordered eating in 298 women. Correlations and mediation analyses, alongside bootstrapping techniques, were used to evaluate relationships between variables. Autistic traits were positively associated with "traditional" disordered eating symptoms including food avoidance and selective eating as well as appearance-related aspects of muscle dysmorphia. Autistic traits were positively associated with avoidant-restrictive food intake disorder (ARFID) symptoms. BD was elevated with increasing autistic traits, only in relation to body fat, not muscularity. Only body fat-related BD (BD-F), but not muscularity-related BD (BD-M) mediated the effect of autistic traits on disordered eating symptoms, predicting increases in both ED and body dysmorphic symptoms, as well as reductions in ARFID symptoms. Our findings suggest that women with autistic traits may be more susceptible to internalizing socially perpetuated body ideals or to social feedback towards their appearance, as only stereotypically "female-typed" BD-F, but not "male-typed" dissatisfaction with muscularity (BD-M) mediated the link between autistic traits and disordered eating. Implications are discussed.}}, author = {{Laskowski, Nora M. and Jürgensen, Vanessa C. and Lehe, Martin S. and Halbeisen, Georg and Paslakis, Georgios}}, booktitle = {{Journal of Psychiatric Research}}, issn = {{1879-1379}}, pages = {{204--211}}, publisher = {{Elsevier BV}}, title = {{{Converging paths: Autistic traits, body image concerns, and disordered eating symptoms in women}}}, doi = {{10.1016/j.jpsychires.2025.02.018}}, volume = {{183}}, year = {{2025}}, } @misc{13651, abstract = {{Microbial food safety is the master key for reducing illness caused by the consumption of foodstuffs. This demonstration therefore aims to use non-pathogenic surrogates to draw conclusions whether vegan ready-to-eat model food serves as a base for growth of pathogenic Escherichia coli and Listeria monocytogenes in vegan ready-to-eat meat substitute in case of a potential contamination, causing a reduction of food safety. Packages of ready-to-eat vegan meat substitutes were inoculated with certain level of non-pathogenic L. innocua and E. coli and incubated at varying environmental conditions before they were examined for changes in the physico-chemical properties. The observed ability of the microbes to grow in the snacks may cause a reduction in food safety. This demonstration shows that these ready-to-eat-snacks may cause a reduction in food safety if the product studied is contaminated.}}, author = {{Müller, Carolin and Alarinta, Jarmo and Frahm, Björn and Wirtanen, Gun}}, booktitle = {{SeAMK Journal}}, issn = {{2984-1917}}, keywords = {{Vegan food, Ready-to-eat food, RTE, Listeria innocua, Escherichia coli, food safety, microbial spoilage, shelf life study}}, number = {{1}}, publisher = {{SeAMK}}, title = {{{Demonstration of Listeria innocua and Escherichia coli growth in ready-to-eat vegan foods}}}, volume = {{2}}, year = {{2025}}, } @inbook{13652, abstract = {{Modellbasierte Konzepte und Simulationstechniken in Kombination mit digitalen Werkzeugen erweisen sich als Schlüssel, um das volle Potenzial biopharmazeutischer Produktionsprozesse zu erschließen, die mehrere herausfordernde Entwicklungs- und Prozessschritte enthalten. Einer dieser Schritte ist der zeit- und kostenintensive Zellproliferationsprozess (auch als Seed Train bezeichnet), um die Zellzahl vom Auftauen der Zellen bis zum Produktionsmaßstab zu erhöhen. Herausforderungen wie komplexer Zellstoffwechsel, Chargen-zu-Chargen-Variationen, Variabilitäten im Zellverhalten und Einflüsse von Änderungen der Kultivierungsbedingungen erfordern adäquate digitale Lösungen, um Informationen über den aktuellen und zukünftigen Prozesszustand bereitzustellen und korrekte Prozessentscheidungen abzuleiten. Zu diesem Zweck haben sich digitale Seed Train Zwillinge als effizient erwiesen, die das zeitabhängige Verhalten wichtiger Prozessvariablen basierend auf mathematischen Modellen, Strategien und Anpassungsverfahren digital darstellen. Dieses Kapitel skizziert die Notwendigkeit der Digitalisierung von Seed Trains, den Aufbau eines digitalen Seed Train Zwillings, die Rolle der Parameterschätzung und verschiedene statistische Methoden in diesem Zusammenhang, die auf mehrere Probleme im Bereich der Bioprozessierung anwendbar sind. Die Ergebnisse einer Fallstudie werden vorgestellt, um einen Bayes’schen Ansatz zur Parameterschätzung und Vorhersage eines industriellen Zellkultur-Seed Trains für die Seed Train Digitalisierung zu veranschaulichen.}}, author = {{Hernández Rodriguez, Tanja and Frahm, Björn}}, booktitle = {{Digitale Zwillinge - Werkzeuge und Konzepte für intelligente Bioproduktion}}, editor = {{Herwig, Christoph and Pörtner, Ralf and Möller, Johannes}}, isbn = {{978-3-031-75697-9}}, keywords = {{Bayes, Digitaler Zwilling, Parameterabschätzung, Seed-Train, Unsicherheit}}, pages = {{107--145}}, publisher = {{Springer }}, title = {{{Digitale Seed Train Zwillinge und statistische Methoden}}}, doi = {{https://doi.org/10.1007/978-3-031-75698-6_5}}, year = {{2025}}, } @misc{13653, author = {{Luttmann, Mario and Blome, André and Müller, Niklas and Naqvi, Syeda Khadeeja and Kutter, Alexander and Jekle, Mario and Müller, Ulrich and Frahm, Björn}}, location = {{Detmold, Germany}}, title = {{{Einblicke in die objektive Bewertung von Weizenbrötchen in der virtuellen Realität}}}, year = {{2025}}, } @misc{13654, author = {{Luttmann, Mario and Blome, André and Kutter, Alexander and Naqvi, Syeda Khadeeja and Müller, Niklas and Jekle, Mario and Frahm, Björn and Müller, Ulrich}}, location = {{Lemgo, Germany}}, title = {{{Qualitätskontrolle von Backwaren in der virtuellen Realität}}}, year = {{2025}}, } @misc{13655, author = {{Luttmann, Mario and Blome, André and Jekle, Mario and Frahm, Björn and Müller, Ulrich}}, location = {{Freising, Germany}}, title = {{{Weizenkleingebäck und Photogrammetrie: Einblicke in die bildbasierte Analyse von Backwaren}}}, year = {{2025}}, } @misc{13656, author = {{Luttmann, Mario and Blome, André and Segermann, Jan and Jekle, Mario and Frahm, Björn and Müller, Ulrich}}, location = {{Lemgo, Germany}}, title = {{{Erkenntnisse zur Nutzung von Photogrammetrie für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen}}}, year = {{2025}}, } @misc{13657, author = {{Müller, Ulrich and Frahm, Björn and Blome, André and Luttmann, Mario}}, location = {{Detmold, Germany}}, title = {{{Teig 4.0}}}, year = {{2025}}, } @misc{13659, author = {{Blome, André and Luttmann, Mario and Frahm, Björn and Müller, Ulrich}}, location = {{Detmold, Germany}}, title = {{{Sensor-Retrofitting-System für den Einsatz in Lebensmittelherstellungsprozessen}}}, year = {{2025}}, } @misc{13660, author = {{Blome, André and Luttmann, Mario and Müller, Ulrich and Frahm, Björn}}, location = {{Detmold, Germany}}, title = {{{Erforschung geeigneter Sensortechnologien zur Erfassung qualitätsrelevanter Eigenschaften bei Sauerteigen}}}, year = {{2025}}, } @misc{13661, author = {{Luttmann, Mario and Blome, André and Frahm, Björn and Müller, Ulrich}}, location = {{Detmold, Germany}}, title = {{{Nutzung der Strangerweiterung zur Inline-Bewertung der viskoelastischen Eigenschaften von Weizenteigen}}}, year = {{2025}}, } @misc{13662, author = {{Luttmann, Mario and Blome, André and Müller, Ulrich and Frahm, Björn}}, location = {{Detmold, Germany}}, title = {{{Photogrammetrie als Mittel zur objektiven Qualitätserfassung von Backwaren}}}, year = {{2025}}, } @misc{13675, abstract = {{This paper extends a previously developed biobjective Mixed-Integer Linear Programming (MILP) methodology for reducing electricity costs and CO2 emissions in Smart-E-Factory applications. While the earlier approach assumed fixed photovoltaic (PV) and battery capacities, we now propose a cascaded optimization framework to determine the optimal sizing (power rating and orientation of the PV system, battery capacity) while simultaneously optimizing battery dispatch. The cost function combines operational costs with amortized investment costs of both PV and battery systems, embedded in a dynamic scheduling optimization that addresses real-time electricity price and CO2 signals. Numerical results indicate that intermediate capacities and balanced east/west orientation maximize cost-effectiveness and emission reductions. This study underscores the value of coupling parametric design and dispatch optimization to achieve scalable, sustainable solutions for industrial energy systems.}}, author = {{Mousavi, Seyed Davood and Schulte, Thomas}}, booktitle = {{ 6th International Conference on Electrical, Communication and Computer Engineering (ICECCE 2025) : 27-28 August 2025, Istanbul, Türkiye}}, isbn = {{979-8-3315-4915-2 }}, keywords = {{Photovoltaic systems, Cost, Electricity, Tariffs, Stochastic processes, Real-time systems, Robustness, Batteries, Planning, Mixed integer linear programming}}, location = {{Istanbul, Turkiye }}, publisher = {{IEEE}}, title = {{{Cascaded Optimization of PV and Battery Sizing Under Dynamic Cost and CO Signals}}}, doi = {{10.1109/icecce67514.2025.11257982}}, year = {{2025}}, } @misc{13688, author = {{Kost, Susanne and Kappen, Luisa and Hollmann, Frauke and Hendricks, Anika}}, publisher = {{TH OWL, Forschungsgruppe UrbanPulse_Detmold}}, title = {{{UrbanPulse_Detmold}}}, year = {{2025}}, } @misc{13689, author = {{Kost, Susanne}}, location = {{Kassel}}, title = {{{Forschungsprojekt und Reallabor UrbanPulse_Detmold. WohnraumMobilisierung & SolidarRAUM Detmold}}}, year = {{2025}}, } @misc{13690, author = {{Kost, Susanne}}, location = {{Online}}, title = {{{Forschungsprojekt und Reallabor UrbanPulse_Detmold. WohnraumMobilisierung & SolidarRAUM Detmold}}}, year = {{2025}}, } @misc{12286, abstract = {{German consumers have high expectations for the freshness of bakery products. When products like burger buns or toast are not sufficiently soft, significant food waste results. In traditional recipes, sucrose plays several important roles, including extending the shelf life of bread, but it also adds undesirable calories. Allulose is a promising sugar alternative with several technological advantages, such as enhanced browning and improved freshness. This study investigated the effect of allulose on the freshness of yeast-based bakery products compared to sucrose and fructose. Regardless of grain type or flour, the use of allulose led to earlier starch gelatinization, which slowed down starch retrogradation. Storage tests of burger buns at 20 °C and 4 °C showed that buns made with allulose had a softer crumb, higher moisture content, and lower water activity (aw-value) over the entire storage period. The improved freshness was also confirmed by descriptive sensory analysis. These results suggest that using allulose can enhance the freshness of yeast-based bakery products and help reduce food waste caused by excessively dry crumbs. Allulose not only improves texture but also contributes to reducing the environmental impact of food waste by prolonging product freshness.}}, author = {{Wittland, Sebastian and Rohn, Sascha and Sciurba, Elisabeth and Begemann, Jens and Sokolowsky, Martina and Kanzler, Clemens and Matthäus, Bertrand}}, booktitle = {{LWT - Food Science and Technology}}, issn = {{1096-1127}}, publisher = {{Elsevier}}, title = {{{Allulose as novel ingredient for improving freshness of yeast-made bakery products}}}, doi = {{https://doi.org/10.1016/j.lwt.2024.117269}}, volume = {{216}}, year = {{2025}}, } @misc{12388, abstract = {{The paper explores the correlation between the concepts of territoriality and social practices in the context of urban and rural (re-)production of space. It traces the degree of “habitualisation” of certain actions and the behaviour of stakeholders, identifying those defined as practices, and revealing their role in the (dis-)continuation of territoriality of a region. It takes a German region Ostwestfalen-Lippe (OWL) as a case study. The research methodology is based on the practice theory of Andreas Reckwitz and his “praxeological quadrat of cultural analysis”, which is applied in this study. The research process includes (a) semi-structured interviews with the representatives of several institutions from the region, (b) narrative analysis and thematic content structuring of the interviews and (c) synthesis analysis. The study clarifies relations between the artefacts and discourses mentioned by the interviewees, and their impact on the practices of the institutions and others contributing to the (dis-)continuation of territoriality and identity of the region. The main findings are related to the (1) methodological contribution—operationalisation of the “praxeological quadrat of cultural analysis”, and (2) substantive contribution—revealing the role of social practices on the continuation of territoriality of the region. The article presents cultural patterns in the perception of and orientation towards long-past territorialities by the interviewees and makes clear what significance these historical and historicising spatial references have for the spatial planning of the present.}}, author = {{Dragutinovic, Anica and Kost, Susanne}}, booktitle = {{Land}}, issn = {{2073-445X}}, number = {{2}}, publisher = {{MDPI AG}}, title = {{{(Dis-)Continuation of Territoriality: A Framework for Analysis of the Role of Social Practices in (Re-)Production of Space}}}, doi = {{10.3390/land14020229}}, volume = {{14}}, year = {{2025}}, } @misc{12391, abstract = {{Daylight saving time (DST) affects millions of people in various everyday situations and is a common topic of debate in legislative parliaments around the world. This paper presents a literature review on the effects of the clock change and DST on electricity usage, health, crime rates, road safety, and economic aspects. This addresses a gap in current literature reviews, as there is a lack of linked analyses considering these research fields. We show that there are partial positive effects on crime rates and road safety generally that result from the delay in ambient light availability. This contrasts with the clearly negative effects on health and the economic aspects, which are mainly driven by the disturbed circadian rhythm and the resulting sleep problems. Furthermore, we find that the initial idea of DST to save electricity will probably no longer apply and may even lead to increased usage. This literature review provides a basis for future research and promotes interdisciplinary research by summarizing current findings in a cross-disciplinary manner and identifying research gaps and opportunities. Furthermore, the findings may guide policy-making discussions and decisions. }}, author = {{Neumann, Philipp and von Blanckenburg, Korbinian}}, booktitle = {{Time & Society}}, issn = {{1461-7463}}, keywords = {{circadian rhythm, clock chang, crime rates, daylight saving time, economic aspects, electricity usage, health, road safety, sleep deprivation}}, publisher = {{SAGE Publications}}, title = {{{What Time Will It Be? A Comprehensive Literature Review on Daylight Saving Time}}}, doi = {{10.1177/0961463x241310562}}, year = {{2025}}, } @misc{12393, abstract = {{Die vorliegende Bachelorarbeit untersucht die zentrale Forschungsfrage, ob der Einsatz von Künstlicher Intelligenz heute und in der Zukunft maßgebliche Auswirkungen auf die kreativen und produktiven Prozesse in der Musikproduktion der E-Musik hat. Ausgehend von einer historischen Einordnung, die bis in die 1950er Jahre zurückreicht, analysiert die Arbeit aktuelle Entwicklungen und Anwendungsmöglichkeiten von KI in diesem spezifischen musikalischen Bereich. Dabei werden sowohl technische Grundlagen als auch die enge Verbindung zwischen Musik und Mathematik beleuchtet, die den Einsatz von KI in der Musikproduktion ermöglichen. Ein besonderer Fokus liegt auf der empirischen Untersuchung mittels qualitativer Interviews mit Experten aus dem Bereich der E-Musik. Diese offenbaren, dass KI gegenwärtig primär als unterstützendes Werkzeug wahrgenommen und eingesetzt wird, wobei sich deutliche Unterschiede zwischen kommerzieller Musik und E-Musik abzeichnen. Während für den kommerziellen Bereich tiefgreifende Veränderungen erwartet werden, prognostizieren die Experten für die E-Musik eine stabilere Entwicklung. Die Arbeit identifiziert zentrale Herausforderungen bei der Integration von KI, insbesondere bei der Übersetzung künstlerischer Ideen in maschinenverständliche Anweisungen sowie der Wahrung künstlerischer Authentizität. Gleichzeitig werden neue Möglichkeiten der Produktionsunterstützung und kreativen Inspiration aufgezeigt. Die Untersuchung schließt mit einem Ausblick auf zukünftige Entwicklungen und Forschungsrichtungen, wobei sowohl technologische als auch kulturelle und rechtliche Aspekte berücksichtigt werden.}}, author = {{Hahn, Nicole}}, keywords = {{Künstliche Intelligenz, E-Musik, Musikproduktion, Kreativitä, algorithmische Komposition}}, pages = {{79}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Künstliche Intelligenz in der Erstellung von E-Musik}}}, year = {{2025}}, } @misc{12404, author = {{Wittland, Sebastian}}, location = {{Berlin}}, title = {{{Untersuchung des Einflusses von Allulose und verschiedenen Getreidesorten sowie Mehltypen auf die Frischhaltung von Hefebackwaren}}}, year = {{2025}}, } @misc{12424, abstract = {{Additive manufacturing of optical, electrical, and mechanical components is a beneficial approach for the rapid prototyping of components and error elimination, with short turnaround times. However, additively manufactured components usually have rough surfaces that need post-processing, particularly for optical components, where the surface roughness must be a small fraction of the wavelength. We demonstrate an innovative and economical approach by dip-coating with the same resin used for printing in a simple post-processing step, providing high transparency to the 3D-printed optical components and reducing surface roughness while achieving perfect index matching of the coating layer. The surface roughness of the 3D-printed optical components drops to 5 nm (arithmetic average) after the dip-coating process. We observed significant performance enhancements after comparing the unprocessed optical components and the dip-coated optical components, including optical transparency and a shiny surface finish for previously rough surfaces.}}, author = {{Shrotri, Abhijeet Narendra and Preu, Sascha and Stübbe, Oliver}}, booktitle = {{Coatings : open access journal}}, issn = {{2079-6412}}, keywords = {{additive manufacturing, post-processing, optics, dip-coating}}, number = {{2}}, publisher = {{MDPI AG}}, title = {{{Achieving Transparency and Minimizing Losses of Rough Additively Manufactured Optical Components by a Dip-Coating Surface Finish}}}, doi = {{10.3390/coatings15020210}}, volume = {{15}}, year = {{2025}}, } @misc{12430, author = {{Bontjes van Beek, Vincent}}, pages = {{96}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Von Partikeln zu Wellen - Analyse und Implementierung von Wassersimulationstechniken in Houdini}}}, year = {{2025}}, } @misc{12445, author = {{Behrens, Colin}}, keywords = {{Gaussian, Splatting, Computergraphics, Scanning, 3D, NeRF, Datensätze}}, pages = {{69}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Splatman : Automatisierte Erstellung von optimierten Datensets aus digitalen Szenen für Gaussian Splatting}}}, year = {{2025}}, } @misc{12487, author = {{Janzen, Lea}}, keywords = {{Branding, TikTok, Branding-Strategie}}, pages = {{53}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Faktoren einer TikTok-Branding-Strategie: Einfluss auf Reichweite und Engagement am Beispiel der Firma Tepto GmbH}}}, year = {{2025}}, } @misc{12489, author = {{Guerra Duque, Julián}}, pages = {{100}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{La vida de Madrid - Erstellung eines filmischen Stadtporträts von Madrid im Stilvergleich mit den Eröffnungsszenen von Midnight in Paris und Manhattan von Woody Allen}}}, year = {{2025}}, } @book{12494, abstract = {{In einer Welt, in der Sprache immer mehr im Mittelpunkt gesellschaftlicher Debatten steht, bietet dieses Buch eine fundierte, kritische und persönliche Reflexion über das Phänomen des Genderns. Der Autor, zunächst überzeugt von der „gendersensiblen“ Sprache und ihren inklusiven Absichten, beschreibt seinen Wandel von einem unbedarften Mitmacher zu einem reflektierten Skeptiker. Kritisches Nachdenken und intensives Recherchieren beleuchtet bisher kaum beachtete Argumente und Folgen des Genderns entlang gesellschaftlicher Konfliktlinien. Was als Zeichen für Gerechtigkeit und Inklusivität gilt, enthüllt zunehmend auch Schattenseiten: Zwang, Spaltung und eine Moralität, die nur wenig Raum für abweichende Ansichten lässt. Ist das Gendern wirklich der Weg zu einer gerechteren Sprache? Oder liegt in der Vielfalt der deutschen Sprache ein viel größeres Potenzial für Inklusivität, das behutsam und respektvoll entfaltet werden sollte? Für die vielen Menschen, die sich unwohl fühlen, ob sie gendern oder nicht, und nach Argumenten für ihre Entscheidung suchen, bietet dieses Buch eine wertvolle Orientierung. Es ist eine Einladung zum Nachdenken, zum Abwägen und zum bewussten Umgang mit der Sprache, die wir prägen und die uns alle prägt.}}, author = {{Schneider, Jan and Kohl, Dirk }}, isbn = {{978-3-907347-38-6}}, keywords = {{Gendern, Sprache, Virtue Signalling, Sprachwandel, Genderdebatte}}, pages = {{210}}, publisher = {{Weltbuch}}, title = {{{Das missbrauchte Geschlecht - Gendern, geht das auch sensibel? }}}, year = {{2025}}, } @misc{12530, author = {{Briesenick, Jörg and Claes, Svenja and Hülsmann, Oliver and Kießler, Carsten and Schneider, Birgit and Schwarzer, Knut and Thiel, Marc}}, pages = {{15}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Bedingungsgefüge beruflicher Bildung in OWL : Was benötigt exzellente berufliche Bildung?}}}, year = {{2025}}, } @misc{12534, author = {{Kude, Max}}, pages = {{70}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Geschwindigkeit im Fokus – Die Darstellung und Wahrnehmung von Dynamik in der Automobilfotografie}}}, year = {{2025}}, } @misc{12536, abstract = {{In dieser Arbeit wurde die Funktion des Sounddesigns untersucht, mit Blick auf Narration, Atmosphäre und Emotionen. Die theoretische Grundlage wurde anhand der historischen Entwicklung, der Gegenwart sowie zukünftiger Entwicklungen betrachtet und in verschiedene Kategorien unterteilt, die das Sounddesign strukturieren. Dazu gehören unter anderem Geräusche, Musik und virtuelle Räume. Die zentrale Theorie dieser Arbeit lautet, dass diese Elemente gezielt eingesetzt werden können, um die Narration zu steuern, Stimmungen zu erzeugen und emotionale Reaktionen der Zuhörenden zu beeinflussen. Diese Theorie wurde anhand verschiedener konkreter Hörspiele überprüft, darunter das eigens erstellte „Lost in the Blind Sea – Eine Reise ins Unbekannte“. Die Hörspiele wurden innerhalb der festgelegten Kategorien beschrieben und analysiert. Dabei ließ sich feststellen, dass Sounddesign gezielt genutzt wird, um akustische Räume zu gestalten, Stimmungen zu erzeugen und die Narration zu strukturieren. Besonders die Kombination aus Einzelgeräuschen, Atmos und Musik erwies sich als wesentliches Element zur Unterstützung der Hörspielinszenierung.}}, author = {{Bäumer, Jascha}}, pages = {{61}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Sounddesign und Musik im Hörspiel „Wie wird Sounddesign in Hörspielen genutzt und welche Funktionen erfüllt es?“}}}, year = {{2025}}, } @misc{12611, author = {{Haag, Celina}}, pages = {{34}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Sabor Barcelona - Konzeption, Gestaltung und Umsetzung eines hybriden Magazins für die Gen Z}}}, year = {{2025}}, } @misc{12646, abstract = {{Die präzise und kosteneffiziente 3D-Rekonstruktion industrieller Umgebungen gewinnt zu-nehmend an Bedeutung, insbesondere für digitale Zwillinge und automatisierte Inspektions-prozesse. Diese Arbeit untersucht die Entwicklung und Evaluierung eines multisensorischen Kamera-Setups, das mit Gaussian Splatting eine speichereffiziente und schnelle Modellierung von Produktionsumgebungen ermöglicht. Dafür wurde ein mobiles, autonomes System auf Basis eines MiR-Roboters entwickelt, das Bilddaten von verschiedenen USB-Kameras (Lo-gitech Brio, Anker C200), einer DSLR und iPhone Kamera sowie Raspberry Pi Kameras er-fasst und verarbeitet. Die zentrale Forschungsfrage adressiert die Effizienz, Bildqualität und Wirtschaftlichkeit von Gaussian Splatting im Vergleich zu etablierten Verfahren wie Photogrammetrie und LiDAR. Erste Testläufe mit DSLR-Aufnahmen und einer manuell rekonstruierten Pipeline zeigen, dass Gaussian Splatting hochdetaillierte Punktwolken generieren kann, jedoch mit Herausfor-derungen hinsichtlich Kameraausrichtung, Überlappung der Bilder und automatisierter Missi-onsplanung des Roboters konfrontiert ist. Die Ergebnisse zeigen, dass das System eine schnelle und speichereffiziente 3D-Rekonstruk-tion ermöglicht, jedoch in seiner aktuellen Form noch Optimierungspotenzial aufweist. Be-sonders die genaue Kalibrierung der Kameras, eine verbesserte Synchronisation der Bilder so-wie eine präzisere Steuerung des Roboters sind entscheidend für die Qualität der Punktwol-ken. Während Gaussian Splatting eine überzeugende Alternative zu klassischen Verfahren darstellt, ist die Systemstabilität derzeit noch abhängig von manuellen Eingriffen und Justie-rungen. Zukünftige Arbeiten sollten sich darauf konzentrieren, die Automatisierung des gesamten Workflows weiter voranzutreiben, insbesondere durch den Einsatz verbesserter Kamera-A-lignment-Algorithmen, Hardware-Trigger für synchrone Bildaufnahme und Machine-Learn-ing-gestützte Bildoptimierung. Zudem könnte eine Erweiterung des Systems um zusätzliche Sensortechnologien wie Time-of-Flight-Sensoren oder LiDAR-Module helfen, die Detailge-nauigkeit weiter zu verbessern und eine robuste Echtzeit-Rekonstruktion zu ermöglichen. }}, author = {{Wiemann, Sam}}, keywords = {{3D-Rekonstruktion, Gaussian Splatting, Photogrammetrie, LiDAR, autonome Robotik, digitale Zwillinge, Industrie 4.0}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Entwicklung und Evaluierung eines multisensorischen Kamera-Setups zur 3D-Raumrekonstruktion in einer dynamischen Industrieumgebung mittels Gaussian Splatting auf einem autonomen Robotersystem}}}, year = {{2025}}, } @misc{12648, abstract = {{Das Ziel der vorliegenden Bachelorarbeit ist es, zu klären, warum es keinen einheitlichen Character-Modeling-Workflow gibt und ob sich die Photogrammetrie von Maquettes als solcher eignen würde. Um dies zu beantworten, wurde qualitative Literaturrecherche betrieben, semistrukturierte Experteninterviews geführt und ein praktischer Versuch unternommen. Daraus ergab sich, dass der vorgeschlagene Workflow über zahlreiche Vorteile, wie die Steigerung von Kreativität, sowie die Verbesserung der teaminternen Kommunikation, verfügt und dadurch das Potential hat Zeit und Geld in Produktionen einzusparen. Jedoch hängt die Wahl des passenden Character-Modeling-Workflows nach wie vor von den Anforderungen des jeweiligen Projekts ab und lässt sich somit nicht pauschalisieren. }}, author = {{Becher, Emma}}, pages = {{49}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Photogrammetrie von Maquettes: Ein alternativer Workflow für das Character-Modeling}}}, year = {{2025}}, } @misc{12665, author = {{Falkenhagen, Johanna}}, pages = {{70}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Empathie mit dem Leblosen: Wie Character Design die Identifikation mit nicht-menschlichen Figuren in animierten Filmen beeinflusst}}}, year = {{2025}}, } @misc{12667, author = {{Halfmann, Maike}}, pages = {{132}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Spitzbergen Hautnah – Wie ist das Leben in der nördlichsten Siedlung der Welt?}}}, year = {{2025}}, } @misc{12670, abstract = {{This systematic literature review critically examines the application of digital technologies in architectural heritage risk management from 2014 to 2024, focusing exclusively on English-language publications. As the significance of architectural heritage continues to be recognized globally, there is an increasing shift towards integrating digital solutions to ensure its preservation and management. This paper explores the evolution and application of digital technologies such as Building Information Modeling (BIM), Geographic Information Systems (GIS), and advanced imaging techniques within the field. It highlights how these technologies have facilitated the non-destructive evaluation of heritage sites and enhanced accessibility and interaction through virtual and augmented reality applications. By synthesizing data from various case studies and scholarly articles, the review identifies current trends and the expanding scope of digital interventions in heritage conservation. It discusses the interplay between traditional conservation approaches and modern technological solutions, providing insights into their complementary roles. The analysis also addresses the challenges and limitations encountered in the digital preservation of architectural heritage, such as data integration, the compatibility of different technologies, and the need for more comprehensive frameworks to guide the implementation of digital tools in heritage conservation practices. Ultimately, this review underscores the transformative impact of digital technology in managing architectural heritage risks, suggesting directions for future research and the potential for innovative applications in the field.}}, author = {{Yu, Yingwen and Raed, Abeer Abu and Peng, Yuyang and Pottgiesser, Uta and Verbree, Edward and van Oosterom, Peter}}, booktitle = {{npj Heritage Science}}, issn = {{3059-3220}}, keywords = {{Heritage & Architecture, Landscape Architecture, Digital Technologies}}, number = {{1}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{How digital technologies have been applied for architectural heritage risk management: a systemic literature review from 2014 to 2024}}}, doi = {{10.1038/s40494-025-01558-5}}, volume = {{13}}, year = {{2025}}, } @misc{12678, author = {{Vetter, Tom}}, pages = {{42}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Filmproduktion mit minimalen Ressourcen : Chancen und Herausforderungen im Low-Budget-Bereich}}}, year = {{2025}}, } @misc{12681, abstract = {{Im Rahmen einer interdisziplinären Forschungsstudie wurde von April bis Juli 2024 der Einfluss von Beleuchtung auf die Inklusivität von Ausstellungsbesuchen untersucht. Ziel der Studie war es, die Frage zu beantworten, inwiefern Lichtgestaltung einen Ausstellungsraum für unterschiedliche Besucher:innen, insbesondere für Menschen mit Seheinschränkungen, zugänglicher und inklusiver machen kann. Die Studie wurde von einem Team aus Expert:innen der Raumwahrnehmung und Lichtgestaltung durchgeführt, darunter Paula Longato (Buro Happold), Prof. Ulrich Nether (IDS) und Kristina Herrmann (IDS), Justin Groot (Sentistic), sowie Studierende der Innenarchitektur in Kooperation mit der Deutschen Arbeitswelt Ausstellung (DASA) und unterstützt durch die Lichttechnik des Unternehmens Zumtobel. Die Sonderausstellung „Respekt“ in Dortmund diente als Forschungsplattform. Durch die partizipative Einbeziehung von Menschen mit Seheinschränkungen wurde ein Forschungsdesign entwickelt, das spezifische Erkenntnisse über die Rolle der Lichtwahrnehmung und deren Bedeutung für die inklusive Gestaltung von Ausstellungsräumen generieren sollte.}}, author = {{Nether, Ulrich and Herrmann, Kristina and Longato, Paula and Schnaus, Anna and Brockmann, Lisa and Willing, Pauline and Schwierz, Tabea and Schnitzler, Rebecca and Dicke, Victoria}}, keywords = {{Inclusive Lighting, Ausstellungsdesign, Seheinschränkungen, Partizipation, Feldforschung, Pre-Study}}, pages = {{99}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Was wir sehen - Inclusive Lighting}}}, year = {{2025}}, } @misc{12691, author = {{Kümmel, Jens and Nordhoff, Daniel}}, booktitle = {{Das Wirtschaftsstudium : wisu ; Zeitschrift für Ausbildung, Prüfung, Berufseinstieg und Fortbildung}}, issn = {{0340-3084 }}, number = {{2}}, pages = {{160 -- 168}}, publisher = {{Lange Verlag GmbH & Co. KG}}, title = {{{Sanierungsmanagement}}}, volume = {{54}}, year = {{2025}}, } @misc{12693, author = {{Freitag, Melissa}}, pages = {{66}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Inklusive Gestaltung von Gesellschaftsspielen - Barrierefreies Grafikdesign in Bezug auf Sehbehinderungen}}}, year = {{2025}}, } @misc{12701, author = {{Merschel, Fabian}}, publisher = {{Technische Hochschule Ostwestfalen Lippe}}, title = {{{Erstellung und Darstellung von Gaussian Splats. Optimierung des Arbeitsablaufs, der Fotobearbeitung und Floater Minimierung}}}, year = {{2025}}, } @misc{12702, author = {{Struck, Susanne}}, location = {{Frankfurt am Main}}, title = {{{Pumpkin seed press cake a valuable source of protein}}}, year = {{2025}}, } @misc{12713, author = {{Schwabe, Hannah}}, pages = {{91}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Personalisierung von Radio On-Demand: Potentiale, Nutzerakzeptanz und die Zukunft des Radios im Vergleich zum linearen Rundfunk}}}, year = {{2025}}, } @misc{12719, abstract = {{A human digital twin (HDT) is a virtual representation of a worker in cyberspace. Nevertheless, current research focusses mainly on HDTs for motoric work types, such as assembly. To fully integrate an HDT for workers in production, it is necessary that an HDT also displays cognitive processes like memorizing, thinking or reasoning. Such a concept can be used in information-based work, for example monitoring highly automated production systems, and contribute to the planning and control of production. Due to the high proportion of planning and decision-making processes, the efficiency of information-based work is determined in particular by the inner processes of the worker. An HDT can therefore help to describe current and future states of socio-technical work systems. Therefore, this paper presents a systematic literature review to explicitly derive the relevant components of an HDT for information-based work types. The elements of such an HDT and its environment are defined. Further, the current gaps in literature are identified. There are currently no real-world applications of such an HDT. Additionally, the value of multi-HDT systems must be evaluated more extensively.}}, author = {{Mordaschew, Viktoria and Latos, Benedikt and Tackenberg, Sven}}, booktitle = {{Procedia Computer Science}}, issn = {{1877-0509}}, keywords = {{Human-centric Production, Digital Twin, Systematic Literature Review}}, pages = {{2137--2146}}, publisher = {{Elsevier}}, title = {{{A Human Digital Twin for Worker-Centric Production}}}, doi = {{https://doi.org/10.1016/j.procs.2025.01.274}}, volume = {{253}}, year = {{2025}}, } @misc{12725, author = {{Brandt, Adrian}}, pages = {{189}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{High Dynamic Range als kreatives Werkzeug in der Bewegtbildproduktion: Möglichkeiten und Herausforderungen für visuelles Erzählen}}}, year = {{2025}}, } @misc{12727, author = {{Sandkühler, Lena Marie}}, pages = {{83}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{„Bunt genug“ – Persuasive Strategien der rechten Diskriminierung marginalisierter Gruppen durch AfD-Anhänger*innen auf TikTok}}}, year = {{2025}}, } @misc{12729, abstract = {{Der Nachhaltigkeitsbericht hat sich in den vergangenen Jahren im System der externen Unternehmenspublizität etabliert. Ursächlich ist die gesellschaftliche Erwartungshaltung hinsichtlich der Erörterung der ökonomischen, ökologischen und sozialen Aspekte des unternehmerischen Handelns innerhalb eines Rechnungslegungsinstruments. Wenngleich die Unternehmen auf diese Entwicklung, welche anhand zahlreicher Regulierungsvorhaben forciert wird, durch die Aufstellung und Offenlegung eines Nachhaltigkeitsberichts reagieren, werden die nachhaltigkeitsrelevanten Leistungsindikatoren regelmäßig in qualitativer und quantitativer Form ausgewiesen. Zur Förderung der Vergleichbarkeit der nachhaltigkeitsrelevanten Leistungsindikatoren mit jenen der Finanzberichterstattung wird deren Monetarisierung im Rahmen des sog. Impact Accounting angestrebt. In diesem Zusammenhang hat die International Foundation for Valuing Impacts (IFVI) in Kooperation mit der Value Balancing Alliance (VBA) eine Verlautbarung verabschiedet. Diese Verlautbarung wird im Rahmen des Beitrags kritisch gewürdigt.}}, author = {{Stawinoga, Martin}}, booktitle = {{Der Konzern}}, issn = {{1611-2296}}, number = {{3}}, pages = {{113--118}}, publisher = {{Fachmedien Otto Schmidt}}, title = {{{Impact Accounting – Eine Erörterung der Verlautbarung der International Foundation for Valuing Impacts/Value Balancing Alliance}}}, year = {{2025}}, } @misc{12733, abstract = {{Occupant satisfaction in office spaces is a critical factor influencing occupant’s productivity, satisfaction and overall workplace experience. This systematic review examines the methodologies and approaches used to assess occupant satisfaction with office space design, identifying key evaluation tools and research trends. The study explores the extent to which existing methodologies integrate environmental, spatial and design factors to provide a comprehensive understanding of user experience. Additionally, it highlights the limitations in current assessment tools, including the lack of standardised frameworks for capturing occupant feedback at different stages of the design process. The findings suggest a growing shift towards data-driven and real-time feedback mechanisms to enhance workplace adaptability. By synthesising existing research, this review aims to provide insights for designers, facility managers and policymakers to refine evaluation methods and integrate occupant-centric strategies into office space planning.}}, author = {{Dávalos Quevedo, María Victoria and Luna-Navarro, Alessandra and Pottgiesser, Uta and Blum, Ulrich}}, booktitle = {{Ergonomics}}, issn = {{1366-5847}}, keywords = {{Occupant satisfaction assessment, User-centered office design, Workplace experience, office environment evaluation}}, pages = {{1--21}}, publisher = {{Taylor & Francis}}, title = {{{Methods and approaches for evaluating occupant satisfaction with office space design: a systematic review}}}, doi = {{10.1080/00140139.2025.2480271}}, year = {{2025}}, } @misc{12738, author = {{Martens, Lina}}, pages = {{69}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Alleine unterwegs. Essayistische Ein-Personen-Hybridformaten auf YouTube}}}, year = {{2025}}, } @misc{12755, author = {{Dinkloh, Alicia}}, pages = {{69}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Bin ich hier richtig? Der Einfluss der Selbstfindung auf die Berufswahl in der Kreativbranche}}}, year = {{2025}}, } @misc{12760, abstract = {{Various degradation mechanisms can diminish the performance of electrical connectors in automobiles over time. It is crucial to gain an in-depth understanding of the failure mechanisms and their interactions, as well as to systematically analyze the failure mechanisms of connectors, assess their state of health, and predict the probability of failure in the future. This work provides a comprehensive overview of degradation mechanisms in electrical connectors, including fretting corrosion, oxidation, delamination, wear through of the protective coating, stress relaxation and plastic deformation. It focuses on mechanisms that contribute to increased contact resistance over time and proposes a unified model to explain their interactions. The study introduces a structured methodology for assessing connector health by outlining key measurement techniques and presenting an efficient approach to failure and state analysis that minimizes both testing time and sample size. This methodology is supported by analyses of connectors from long-term life tests and field-used, field-tested vehicles. Additionally, the study explores new aspects of the state analysis for accelerated testing of connectors, supported by examples from field-tested vehicles and various test methods, to predict connectors lifetime and evaluate the effectiveness of existing testing approaches.}}, author = {{Song, Jian and Hilmert, Dirk and Kiel, Frederik}}, booktitle = {{Engineering Failure Analysis}}, issn = {{1873-1961}}, keywords = {{Combined failure mechanisms, Combination of analytical methods, Procedure of analysis}}, number = {{5}}, publisher = {{Elsevier}}, title = {{{Mechanisms of failure and state analysis of electrical connectors in automobiles}}}, doi = {{10.1016/j.engfailanal.2025.109427}}, volume = {{173}}, year = {{2025}}, } @misc{12763, abstract = {{In a previous paper, the correlation between the wear resistance of coatings and the lifetime of electrical connectors under fretting load was discovered. Based on this knowledge, various modifications of silver-based coatings with markedly increased wear resistance have been developed, and a calculation model for predicting connector lifetime has been formulated. Investigations on silver-coated electrical contacts with increased wear resistance show extended lifetimes in fretting wear and fretting corrosion tests, and the calculation model with various modified coating materials can be validated. However, contacts with very high wear-resistant coatings fail earlier than the specific wear coefficient and the calculation model prediction suggest. The in-depth investigation of the coating material and the wear scar revealed the reasons for this unexpectedly shorter lifetime. The high wear resistance of modified silver coatings is achieved by increased micro-hardness. Both coatings with coating materials of high hardness and high thickness can lead to longer lifetimes under fretting load. However, increased fretting cycles can also cause fatigue and electrical contacts can fail due to delamination of the surface coating caused by fretting fatigue, and this delamination can lead to a sudden exposure of the base material, thus enabling its corrosion. Therefore, both wear resistance and fatigue resistance should be increased in order to achieve a long lifetime of electrical contacts under fretting load.}}, author = {{Song, Jian and Tuelling, Soeren and Hengstler, Jonas}}, booktitle = {{Wear : an international journal on the science and technology of friction, lubrication and wear }}, issn = {{0043-1648}}, keywords = {{Fretting, Wear, Fatigue, Lifetime, Electrical contacts}}, publisher = {{Elsevier}}, title = {{{Correlation between wear and fatigue properties and the lifetime of silver coated electrical connectors}}}, doi = {{10.1016/j.wear.2025.205971}}, year = {{2025}}, } @misc{12764, author = {{Hoppe, Linus}}, pages = {{128}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Die Rolle des Sounddesigns bei der Konstruktion unzuverlässiger Erzähler im Film - Eine filmwissenschaftliche Analyse}}}, year = {{2025}}, } @misc{12767, author = {{Junker, Kira}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Design & sein: Was ist (gutes) Design? - Zwischen Funktionalismus und Ästhetik}}}, year = {{2025}}, } @book{12775, editor = {{Kyriakou, Mary-Anne and Meyer, Valerie}}, isbn = {{978-3-910240-02-5}}, keywords = {{Lichtkunst, Lichtinstallation, Lichtlabor, Recycling, Upcycling, Plastikmüll, Umweltverschmutzung, Blaue Stunde}}, pages = {{70}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Beautiful Rubbish – Lichtkunstevent in der Blauen Stunde}}}, doi = {{10.25644/r2zy-0h73}}, year = {{2025}}, } @book{12779, editor = {{Kyriakou, Mary-Anne and Meyer, Valerie}}, isbn = {{978-3-910240-03-2}}, keywords = {{Light art, Light installation, Light laboratory, Recycling, Upcycling, Plastic waste, Environmental pollution, Blue Hour}}, pages = {{70}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Beautiful Rubbish - Light Art Event in the Blue Hour}}}, doi = {{10.25644/7k4z-rd21}}, year = {{2025}}, } @misc{12781, abstract = {{Roller compaction/dry granulation (RC/DG) is a key process in pharmaceutical manufacturing for improving powder flowability, density, and segregation resistance. Advanced statistical modeling was used to optimize RC/DG process parameters and subsequently binder compositions by employing process and mixture design experiments. The authors used microcrystalline cellulose (MCC), silicified MCC (SMCC), and dicalcium phosphate (DCP) as filler-binder examples in RC/DG experiments. Granule and tablet properties, including flowability, bulk and tapped densities, as well as resistance to crushing, were analyzed using compendial methods. The process design experiments confirmed that RC/DG reduces manufacturability compared to direct compression. Optimal processing conditions, balancing sufficient tablet strengths and granule formation, were identified to be between 20 (SCF * ϑ) [kN/cm] and ∼ 60 (SCF * ϑ) [kN/cm]. Thereby (ϑ) is defined as the screw-to-roll speed ratio and (SFC) as the specific compaction force. Mixture design experiments revealed optimal mixtures balancing SMCC, MCC, and DCP to achieve desired properties like low angle of repose, high bulk density, and strong tablets. These findings provide guidance for selecting formulations and process parameters in RC/DG applications. The derived ‘SCF * ϑ’- factor was found to effectively describe the granulation intensity. A superimposed mixture design model based on precise target values of the parameters bulk density, flow properties, and breaking force allowed identification of the best formulation.}}, author = {{Märkle, Niclas and Warnke, Gernot and Pein-Hackelbusch, Miriam}}, booktitle = {{International Journal of Pharmaceutics: X}}, issn = {{2590-1567}}, keywords = {{Design of experiments, Roller compaction/dry granulation, RC/DG, Dicalcium phosphate, Microcrystalline cellulose, Silicified microcrystalline cellulose}}, publisher = {{Elsevier BV}}, title = {{{An iterative process and mixture design approach for dry granulated ternary blends of filler-binders}}}, doi = {{10.1016/j.ijpx.2025.100331}}, volume = {{9}}, year = {{2025}}, } @misc{12782, abstract = {{Diese Arbeit untersucht den Einfluss KI-gesteuerter Non-Player-Charaktere (NPCs) mit Spracherkennung auf das Spielerlebnis und die Immersion in virtuellen Umgebungen. Dabei wird analysiert, inwiefern eine dynamische Interaktion zwischen Spieler und NPC zur emotionalen Bindung beiträgt und das Eintauchen in die Spielwelt verstärkt. Zur Untersuchung wurde ein VR-Spielprototyp („Ward13“) entwickelt, in dem Spieler durch Spracherkennung frei mit einem NPC interagieren können. Theoretische Grundlagen aus den Bereichen Spieleentwicklung, Künstliche Intelligenz, Virtual Reality und interaktive Narration bilden die Basis der Analyse. Die praktische Implementierung erfolgte mittels der Convai Plattform in Unreal Engine, ergänzt durch Sentiment-Analyse zur Anpassung des NPC Verhaltens. Die Arbeit zeigt zudem, wie KI-Integration auch für Entwickler ohne KI-Erfahrung umsetzbar ist. Dabei wird die Zugänglichkeit bestehender Tools sowie die Herausforderungen bei der Implementierung und Anpassung von NPC-Verhalten analysiert. Die Evaluation des Prototyps wurde durch Nutzerstudien und Befragungen durchgeführt. Die Ergebnisse zeigen das Potenzial von Spracherkennung zur Verbesserung der Immersion und verdeutlichen gleichzeitig Optimierungsmöglichkeiten sowie die praktischen Anforderungen für Entwickler. Die Arbeit gibt einen Überblick über die technischen Möglichkeiten der KI Integration und deren Bedeutung für zukünftige Entwicklungen im Bereich immersiver VR Spiele. }}, author = {{Käuper, Leon}}, keywords = {{VR, KI, Spracherkennung, NPC, Spieleentwicklung}}, pages = {{78}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Wenn Spiele sprechen: Spracherkennung und künstliche Intelligenz in der Gestaltung fesselnder virtueller Welten }}}, year = {{2025}}, } @misc{12844, abstract = {{Solketal and oxymethylene ether (OME) are two promising blending candidates for regenerative fuels (e-fuels), which could contribute to a holistic solution to the energy crisis. In this study the thermo-oxidative aging of these two e-fuels in their pure form as well as in binary mixtures with different ratios (3:1, 1:1, and 1:3) (vol%) is investigated. Herein, the reaction networks of the thermo-oxidative aging process of both e-fuels and mixtures thereof is elucidated based on intermediates and decomposition products determined via GC-MS. Furthermore, changes of important fuel-specific parameters like kinematic viscosity and density as well as total acid number during aging have been determined. The 3:1 solketal:OME (vol%) mixture exhibits a higher stability to thermo-oxidative aging than the pure fuel components or mixtures with other ratios. The viscosity value of this mixture is within the DIN EN 590 norm after accelerated aging of 72 h (viscosity (72 h) = 4.25 mm(2)/s)) unlike other blends. The maximum value of the total acid number of this aged mixture reaches only similar to 29 % of the maximum value of aged pure OME and has the lowest value of all mixtures. Furthermore, the formation of a precipitate could be successfully suppressed in the 3:1 solketal:OME (vol%) mixture different from other mixtures. With these findings, this study contributes to the design of new sustainable fuels for the transport sector.}}, author = {{Lichtinger, Anne and Poller, Maximilian J. and Schröder, Olaf and Türck, Julian and Garbe, Thomas and Krahl, Jürgen and Jakob, Markus and Albert, Jakob}}, booktitle = {{Fuel : the science and technology of fuel and energy}}, issn = {{1873-7153}}, keywords = {{E -fuels, Solketal, OME, Fuel mixtures, Aging mechanism}}, publisher = {{Elsevier BV}}, title = {{{Revealing the aging mechanisms of solketal, oxymethylene ether, and mixtures thereof as promising e-fuels}}}, doi = {{10.1016/j.fuel.2025.134738}}, volume = {{390}}, year = {{2025}}, } @misc{12845, abstract = {{Forest succession alters soil organic carbon (SOC) dynamics by changing litter quality of litter entering the soil and affecting microbial communities. However, few studies have explored how litter quality interacts with soil fungal communities to regulate SOC mineralization during successional changes in forest succession. We studied the relationship between litter quality, SOC mineralization, and associated fungal composition by conducting an in-situ decomposition experiment in a natural broadleaf forest and a pure Moso bamboo (Phyllostachys edulis) forest, where the succession in former forest arrested by structurally inferior bamboo grasses. On average, topsoil organic carbon mineralization increased by 73 % and subsoil by 233 % (only during autumn) following the broadleaf forest transitions to bamboo dominance. More decomposable litterfall in the bamboo forests increased the abundance of saprophytic fungi (e.g., Mortierellales and Chaetothyriales orders) and enhanced topsoil degradation functions, promoting SOC mineralization compared to the broadleaf forest. Higher water-soluble organic carbon content increased subsoil organic carbon mineralization by increasing the abundance of Mortierellales order. Our results emphasized the importance of interaction between litter quality and fungal composition (especially saprophytic fungi) regulated SOC mineralization in arrested succession. The enhanced SOC mineralization after the broadleaf forest transition to bamboo forest suggested that the traits of Moso bamboo, such as fast litterfall decomposition, can accelerate SOC mineralization to reinforce its dominance. By examining the role of microbial decomposition in regulating soil nutrient dynamics in the context of arrested succession, our study offered a unique mechanistic perspective on the belowground drivers of bamboo dominance, with important implications for forest structure and function.}}, author = {{Teng, Qiumei and Fang, Tao and Zhang, Qianqian and Gunina, Anna and Zheng, Aiyu and Song, Zhaoliang and Zhou, Jingyun and Chang, Scott X. and Li, Yongchun}}, booktitle = {{ Applied soil ecology : a section of agriculture, ecosystems & environment}}, issn = {{1873-0272}}, keywords = {{Arrested succession, Moso bamboo, Litter decomposition, SOC mineralization, Soil fungal composition, Water-soluble organic carbon content}}, publisher = {{Elsevier BV}}, title = {{{Successional transition from broadleaf to bamboo forests promotes fungal communities and soil carbon mineralization following the altered litterfall quality}}}, doi = {{10.1016/j.apsoil.2025.106006}}, volume = {{209}}, year = {{2025}}, } @misc{12849, abstract = {{Trophic interactions determine food web structure and influence biodiversity, community structure, ecosystem functioning, and food web responses to global change. These interactions are highly flexible, changing on temporal scales from diurnal to evolutionary times due to phenotypic plasticity, rapid evolution and species sorting. Small-scale experimental and theoretical studies of plankton interactions have demonstrated a high relevance of this flexibility for community dynamics and ecosystem processes in small, simplified communities. However, the extent to which this flexibility affects larger-scale systems, for example, global ocean dynamics and their responses to global change, is still poorly understood. Differences in methodology, focus and terminology between research disciplines limit our ability to project established effects of flexible trophic interactions onto larger spatial and temporal scales. We propose to bridge this gap with a general framework for upscaling knowledge from small-scale research to large-scale models. Building on examples from plankton communities, we use this framework to show how mechanisms demonstrated in small-scale studies can be linked to ecosystem functions relevant at large scales. We argue for incorporating flexibility in large-scale process-based models to improve their realism and predictive power, and discuss challenges and ways forward for achieving this. Finally, we suggest several concrete ways for upscaling small-scale studies to make their findings more relevant for large-scale research, to close existing knowledge gaps and to improve our understanding of how flexible trophic interactions affect dynamics and processes across scales.}}, author = {{van Velzen, Ellen and Wollrab, Sabine and Kerimoglu, Onur and Gaedke, Ursula and Grossart, Hans-Peter and Kasada, Minoru and Klip, Helena C. L. and Moorthi, Stefanie and Shatwell, Tom and Thongthaisong, Patch and Friederike Prowe, A. E.}}, booktitle = {{Ecosystems}}, issn = {{1435-0629}}, keywords = {{Functional traits, Plankton interactions, Rapid evolution, Phenotypic plasticity, Ecosystem functioning, Global change, Upscaling, Adaptation}}, number = {{2}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Flexibility in Aquatic Food Web Interactions: Linking Scales and Approaches}}}, doi = {{10.1007/s10021-025-00968-7}}, volume = {{28}}, year = {{2025}}, } @misc{12850, abstract = {{Winter cover crops (CCs) provide substantial agronomic and environmental benefits, yet their influence on nitrogen (N) fertilization requirements and yield outcomes for subsequent crops remains underexplored. This study investigates the economic optimal nitrogen rates (EONRs) and corresponding yield effects for first (silage maize or sugar beet) and second (winter wheat) succeeding crops following CCs. Four CC species from different functional groups were compared to a bare fallow control on contrasting sandy and loamy soils across four German field sites over two consecutive cropping sequences. Results revealed opposing effects: reduced EONR and increased N use efficiency on sandy soils in silage maize sequences, particularly following oil radish and rye CCs, but increased EONR on loamy soils for sugar beet sequences, with vetch CC showing the most favourable outcomes. Yield impacts varied by CC type and soil, with oil radish consistently enhancing yields across sites. However, CC effects on EONR were not correlated with pre-winter N uptake in CC biomass, challenging simple N budgeting practices. Environmental analysis highlighted potential greenhouse gas savings via reduced fertilizer inputs on sandy soils but increased upstream emissions on loamy sites. These findings emphasize the need for site-specific CC selection to balance economic and environmental benefits, with oil radish and vetch emerging as optimal choices in our trials for sandy and loamy soils, respectively.}}, author = {{Kühling, Insa and Pahlmann, Ingo and Räbiger, Thomas and Helfrich, Mirjam and Flessa, Heinz and Schlathölter, Michaela and Koch, Heinz-Josef and Essich, Lisa and Ruser, Reiner and Reinhard-Kolempas, Marilena and Hoffmann, Annette and Kage, Henning}}, booktitle = {{Nutrient Cycling in Agroecosystems}}, issn = {{1573-0867}}, keywords = {{Catch crop, Silage maize, Sugar beet, Winter wheat, N-transfer, Cropping sequence, N recommendations}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Legacies of winter cover crops lead to opposing optimal N fertilisation rates and yields in first and second subsequent crops on contrasting soils}}}, doi = {{10.1007/s10705-025-10400-0}}, year = {{2025}}, } @misc{12852, abstract = {{Anfang des Jahres 2024 hat die European Financial Reporting Advisory Group (EFRAG) einen Konsultationsentwurf eines Standards für die freiwillige Nachhaltigkeitsberichterstattung nicht-kapitalmarktorientierter KMU (VSME ESRS ED) veröffentlicht. Die interessierte Öffentlichkeit konnte bis Mitte Mai 2024 eine Stellungnahme einreichen. Diese Möglichkeit haben 51 Unternehmen und Interessenverbände aus Deutschland in Anspruch genommen. Der vorliegende Beitrag stellt diese Stellungnahmen vor und geht auf die dabei zum Ausdruck gebrachten zentralen Verbesserungsmöglichkeiten ein. In einem Folgebeitrag soll analysiert werden, ob und inwiefern diese Verbesserungsmöglichkeiten im Rahmen der Finalisierung des VSME ESRS berücksichtigt worden sind.}}, author = {{Pasch, Lilia and Stawinoga, Martin}}, booktitle = {{Zeitschrift für Corporate Governance}}, issn = {{1868-7792}}, number = {{2}}, pages = {{S. 80--87}}, publisher = {{Erich Schmidt Verlag}}, title = {{{Konsultationsverfahren zum VSME ESRS der EFRAG – Eine Analyse der eingegangenen Stellungnahmen}}}, doi = {{https://doi.org/10.37307/j.1868-7792.2025.02.12}}, volume = {{20}}, year = {{2025}}, } @misc{12853, abstract = {{Lentic waters integrate atmosphere and catchment processes, and thus ultimately capture climate signals. However, studies of climate warming effects on lentic waters usually do not sufficiently account for a change in heat flux from the catchment through altered inflow temperature and discharge under climate change. This is particularly relevant for reservoirs, which are highly impacted by catchment hydrology and may be affected by upstream reservoirs or pre‐dams. This study explicitly quantified how the catchment and pre‐dams modify the thermal response of Rappbode Reservoir, Germany's largest drinking water reservoir system, to climate change. We established a catchment‐lake modeling chain in the main reservoir and its two pre‐dams utilizing the lake model GOTM, the catchment model mHM, and the stream temperature model Air2stream, forced by an ensemble of climate projections under RCP2.6 and 8.5 warming scenarios. Results exhibited a warming of 0.27/0.15°C decade−1 for the surface/bottom temperatures of the main reservoir, with approximately 8%/24% of this warming attributed to the catchment warming, respectively. The catchment warming amplified the deep water warming more than at the surface, contrary to the atmospheric warming effect, and advanced stratification by about 1 week, while having a minor impact on stratification intensity. On the other hand, pre‐dams reduced the inflow temperature into the main reservoir in spring, and consequently lowered the hypolimnetic temperature and postponed stratification onset. This shielded the main reservoir from climate warming, although overall the contribution of pre‐dams was minimal. Altogether, our study highlights the importance of catchment alterations and seasonality when projecting reservoir warming, and provides insights into catchment‐reservoir coupling under climate change.}}, author = {{Gai, Bo and Kumar, Rohini and Hüesker, Frank and Mi, Chenxi and Kong, Xiangzhen and Boehrer, Bertram and Rinke, Karsten and Shatwell, Tom}}, booktitle = {{ Water resources research : an AGU journal}}, issn = {{1944-7973}}, keywords = {{climate change, coupled catchment-lake model, thermal characteristics, drinking water reservoir management, GOTMstratification}}, number = {{1}}, publisher = {{American Geophysical Union (AGU)}}, title = {{{Catchments Amplify Reservoir Thermal Response to Climate Warming}}}, doi = {{10.1029/2023wr036808}}, volume = {{61}}, year = {{2025}}, } @misc{12859, abstract = {{One of the greatest challenges facing environmental science is to better understand the impacts of predicted future changes in the terrestrial hydrological cycle. It has been recognized that human activities play a key role and must therefore be considered in future climate simulations. The representation of anthropization in land surface schemes within global earth system models is at a relatively nascent stage and must be improved for more accurate future projections of water resources. The understanding of the impact of anthropogenic processes has been hampered by the lack of consistent and extensive observations. Here, we present the Land surface Interactions with the Atmosphere over the Iberian Semi-arid Environment (LIAISE) project field campaign which brought together ground-based (surface energy budget estimated at 7 sites, 269 radio soundings made at 2 sites and multiple remote sensing instruments for profiling the lower atmosphere), airborne measurements (3 airplanes and numerous drones measuring surface and atmospheric properties) and satellite data (to derive estimates of irrigation timing, soil moisture, evapotranspiration and surface temperature) to improve our understanding of key natural and anthropogenic land processes and boundary layer feedbacks. The study area is in the Ebro basin of northeastern Spain in a hot, dry Mediterranean climate, with a sharp demarcation between a vast intensively irrigated region and a much drier rainfed zone to the east. Analysis of the observations reveal strong surface heterogeneities of evapotranspiration within the irrigated zone (differences upwards of approximately 7 mm day-1 between fields), linked to the crop type, vegetation phenology and soil moisture, all of which were modulated by irrigation. The significant surface flux differences between the irrigated and rainfed zones were found to result in strongly contrasting atmospheric boundary layer properties (between 2 supersites​ separated by 14 km) extending upwards through the lowest several km of the atmosphere.}}, author = {{Boone, Aaron and Bellvert, Joaquim and Best, Martin and Brooke, Jennifer K. and Canut-Rocafort, Guylaine and Cuxart, Joan and Hartogensis, Oscar and Moigne, Patrick Le and Miró, Josep Ramon and Polcher, Jan and Price, Jeremy and Seguí, Pere Quintana and Bech, Joan and Bezombes, Yannick and Branch, Oliver and Cristóbal, Jordi and Dassas, Karin and Fanise, Pascal and Gibert, Fabien and Goulas, Yves and Groh, Jannis and Hanus, Jan and Hmimina, Gabriel and Jarlan, Lionel and Kim, Ed and Dantec, Valérie Le and Page, Michel Le and Lohou, Fabienne and Lothon, Marie and Mangan, Mary Rose and Martí, Belén and Martínez-Villagrasa, Daniel and McGregor, James and Kerr-Munslow, Amanda and Ouaadi, Nadia and Philibert, Alban and Quiros-Vargas, Juan and Rascher, Uwe and Siegmann, Bastian and Udina, Mireia and Vial, Antoine and Wrenger, Burkhard and Wulfmeyer, Volker and Zribi, Mehrez}}, booktitle = {{Journal of the European Meteorological Society}}, issn = {{2950-6301}}, keywords = {{Anthropization, Irrigation, Agriculture, Field campaign, Surface energy budget, Evapotranspiration, Land–atmosphere interactions, Ebro basin}}, number = {{Dez.}}, publisher = {{Elsevier BV}}, title = {{{The Land Surface Interactions with the Atmosphere over the Iberian Semi-Arid Environment (LIAISE) field campaign}}}, doi = {{10.1016/j.jemets.2025.100007}}, volume = {{2}}, year = {{2025}}, } @misc{12871, abstract = {{Sustainability in the food chain and the prevention of food losses is an issue of increasing importance. There is a large number of processing by-products where innovative strategies are helpful for transferring these losses into a consumable state. In a step-by-step approach, this current study focused on the sensory properties of blends of sunflower press cake and whey, fermented with different consortia of microorganisms and intended for being used as a basis for a savory spread. In the first part of the work, blends fermented with six co-cultures from lactic acid bacteria and yeasts were characterized by free choice profiling and quantitative descriptive analysis. The respective results were used to modify the formulation and to select the fermentation cultures that were promising from a sensory point of view. Subsequent investigations allowed reducing sample dimensionality further, and the study was concluded by affective hedonic tests and a check-all-that-apply set-up performed by consumers. The final experiment also comprised a just-about-right approach performed for specifically evaluating spreadability. The outcome of the entire study indicates that it is possible to tailor attractive foods from by-products, provided that the need for final optimizations regarding palatability is considered.}}, author = {{Rohm, Harald and Morejón Caraballo, Sophie and Salvador, Ana and Mendo, Sofia and Llorca, Empar and Cattaneo, Stefano and De Noni, Ivano and Struck, Susanne and Foschino, Roberto and Hernando, Isabel}}, booktitle = {{Foods : open access journal}}, issn = {{2304-8158}}, keywords = {{food losses, sustainability, by-product utilization, spreadability}}, number = {{9}}, publisher = {{MDPI AG}}, title = {{{Sensory Properties of Fermented Blends of Sunflower Press Cake and Whey}}}, doi = {{10.3390/foods14091489}}, volume = {{14}}, year = {{2025}}, } @misc{12876, abstract = {{Carrot juice is valued for its high vitamin and antioxidant content, necessitating gentle thermal processing to preserve these nutrients. Its slightly acidic pH value requires a two-step heating process, warranting optimization to enhance product quality and resource efficiency. This study investigated the impact of varying the first heating step between 100 and 130 °C on chemical, sensory, and microbiological parameters. While other chemical parameters remained stable, lactic acid content increased significantly from 55 to 1405 mg/L over downtimes, highlighting the influence of external factors that could not be influenced within the investigations. Lower heating temperatures compromised microbiological stability, with spore-forming bacteria (5 colony forming units per 20 mL) detected at just a 10 °C reduction. Sensory quality showed minimal change, with descriptive analysis identifying only 3 respectively 4 significantly different attributes out of 19 across the factors experimental parameter setting and technical repetition. The quality of raw materials had a more pronounced impact on sensory outcomes than the heating temperature. This study concludes that adjusting the first heating temperature has limited benefits for sensory quality but risks microbiological safety. Emphasis should therefore be placed on ensuring high-quality raw materials and consistent raw juice properties to maintain product quality.}}, author = {{Weishaupt, Imke and Katsch, Linda and Sokolowsky, Martina and Schneider, Jan}}, booktitle = {{Brewing science : the scientific organ of the Weihenstephan Scientific Centre of the TU Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB), of the Scientific Station for Breweries in Munich, of the Veritas laboratory in Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für Brauwissenschaft}}, issn = {{1866-5195 }}, keywords = {{fractionated sterilization, carrot juice, descriptive analysis, microbiological stability}}, number = {{3/4}}, pages = {{17--26}}, publisher = {{Fachverlag Hans Carl GmbH}}, title = {{{Comparative study on the effect of mild temperature conditions in fractionated sterilization of carrot juice on microbiological stability and sensory properties}}}, doi = {{10.23763/BrSc25-04weishaupt}}, volume = {{78}}, year = {{2025}}, } @misc{12881, abstract = {{Neben der Ausweitung des Kreises der zur Nachhaltigkeitsberichterstattung verpflichteten Unternehmen sieht die Corporate Sustainability Reporting Directive auch eine materielle Prüfung der nachhaltigkeitsrelevanten Angaben vor. Diese Prüfung wird voraussichtlich eine Vorbehaltsaufgabe der Wirtschaftsprüfer sein, sodass der Personalbedarf im Bereich der Prüfung von Nachhaltigkeitsberichten dort zunehmen dürfte. Insofern werden im Folgenden die Stellenausschreibungen im Bereich der Prüfung von Nachhaltigkeitsberichten der zehn großen Wirtschaftsprüfungsgesellschaften in Deutschland analysiert.}}, author = {{Neumann, Philipp and Stawinoga, Martin}}, booktitle = {{Die Wirtschaftsprüfung (WPg)}}, issn = {{0340-9031}}, number = {{9}}, pages = {{472--477}}, publisher = {{IWD Verlag}}, title = {{{Stellenausschreibungen im Bereich der Prüfung von Nachhaltigkeitsberichten: Eine Analyse der Vakanzen großer Wirtschaftsprüfungsgesellschaften}}}, volume = {{78}}, year = {{2025}}, } @proceedings{12885, editor = {{Song, Jian}}, isbn = {{978-3-00-081713-7}}, location = {{Lemgo}}, publisher = {{Labor für Feinsystemtechnik, Technische Hochschule Ostwestfalen-Lippe,}}, title = {{{Elektrische und optische Verbindungstechnik 2025 : Tagungsband der VDE/VDI GMM-Fachtagung : 10. Symposium Connectors }}}, year = {{2025}}, } @misc{12886, author = {{Blauth, Michael and Tülling, Sören and Song, Jian}}, booktitle = {{Elektrische und optische Verbindungstechnik 2025 : Tagungsband der VDE/VDI GMM-Fachtagung : 10. Symposium Connectors}}, editor = {{Song, Jian}}, isbn = {{978-3-00-081713-7}}, location = {{Lemgo}}, pages = {{42--57}}, publisher = {{Labor für Feinsystemtechnik, Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Untersuchung zum Einfluss der Betriebstemperatur und der Applikationsmenge von Schmierstoffen bei Reibversuchen an Silberkontakten}}}, year = {{2025}}, } @misc{12887, author = {{Probst, Roman and Song, Jian}}, booktitle = {{Elektrische und optische Verbindungstechnik 2025 : Tagungsband der VDE/VDI GMM-Fachtagung : 10. Symposium Connectors}}, editor = {{Song, Jian}}, isbn = {{978-3-00-081713-7}}, location = {{Lemgo}}, pages = {{222--230}}, publisher = {{Labor für Feinsystemtechnik, Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Einfluss von Vibration auf die Mikrobewegung von Steckverbindern}}}, year = {{2025}}, } @misc{12892, author = {{Tabert, Dennis}}, pages = {{65}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Klassische Medien im digitalen Zeitalter - Welche Bedeutung hat Social Media für Radiosender?}}}, year = {{2025}}, } @misc{12896, abstract = {{Poly-3-hydroxybutyrate (P3HB) is a promising alternative to persistent conventional plastics, capable of biodegrading within months. However, its microbial-driven degradation raises concerns about nutrient immobilization and impacts on plant growth. The biodegradation process occurs in multiple stages, during which shifts in the microbial community can alter soil properties and influence utilization of both intrinsic and polymer-derived organic matter. This study employs a novel approach to investigate how nutrient dynamics during the late stage of P3HB biodegradation affect lettuce (Lactuca sativa var. capitata cv. Brilliant) growth. Soil-to-sand mixtures (100_0, 80_20, 60_40, 40_60, 20_80, and 0_100 ratios) were spiked with P3HB, allowed to biodegrade for eight weeks, and then planted with sprouted lettuce seeds, which were cultivated for another eight weeks. P3HB addition inhibited plant growth and root development in all soil-sand mixtures. However, increasing the sand proportion enhanced plants' nitrogen content by 13-45 % compared to 100 % soil + P3HB. Depending on the sand-to-soil ratio, P3HB stimulated most enzymes involved in carbon, nitrogen and phosphorus acquisition. Basal and substrate-induced respirations were 9-209 % higher under P3HB addition compared to P3HB-free soil, likely due to an increase in the stabilized soil organic matter fraction. Residual P3HB analysis revealed that diluting soil with 20 % sand accelerated biodegradation, despite a decrease in bacterial abundance. In the 80_20 variant, the microbial community shifted toward higher fungal abundance, 19 % more than in 100_0 soil. While microbial proliferation was observed, it effect was outweighed by negative impacts on dry aboveground and root biomass. The highest P3HB biodegradation rate occurred in the 80_20 variant, underscoring soil texture as a critical factor in P3HB biodegradation. While microbial communities can degrade bioplastics, this process may compromise plant nutrient availability and hinder plant growth. }}, author = {{Brtnicky, Martin and Mustafa, Adnan and Holatko, Jiri and Gunina, Anna and Ondrasek, Gabrijel and Naveed, Muhammad and Hammerschmiedt, Tereza and Kamenikova, Eliska and Alamri, Saud and Siddiqui, Manzer H. and Kintl, Antonin and Baltazar, Tivadar and Malicek, Ondrej and Kucerik, Jiri}}, booktitle = {{Environmental Research}}, issn = {{1096-0953}}, keywords = {{Bioplastics, Nutrient acquisition, Plant growth reduction, Soil microbes, Soil texture.}}, publisher = {{Elsevier BV}}, title = {{{Soil texture-driven modulation of poly-3-hydroxybutyrate (P3HB) biodegradation: Microbial shifts, and trade-offs between nutrient availability and lettuce growth}}}, doi = {{10.1016/j.envres.2025.121618}}, volume = {{278}}, year = {{2025}}, } @misc{12909, author = {{Madeja, Jonathan}}, keywords = {{Hochzeitsfilm, Hochzeitsvideograf, Werbevideos}}, pages = {{94}}, publisher = {{Technische Hochschule Ostwestfalen-Lippe}}, title = {{{Lead-Generierung in der Hochzeitsvideografie mittels Bewegtbild-Werbeclips im Bereich Social Media}}}, year = {{2025}}, } @misc{12913, editor = {{Hofmann, Martin Ludwig}}, issn = {{2566-8382}}, number = {{17}}, pages = {{79}}, publisher = {{Technische Hochschule Ostwestfalen Lippe}}, title = {{{52 Grad : Magazin, Stadtplanung }}}, year = {{2025}}, } @misc{12914, author = {{Kudic, Muhamed and Krüger, Max and Mouratidis , Marios }}, location = {{Athen, Greece }}, title = {{{Enabling invention and innovation in open exploration environments and their systemic reproduction}}}, year = {{2025}}, } @misc{12915, abstract = {{Die Bachelorarbeit beschäftigt sich mit den grundlegenden Aspekten der Zeichentheorie. Darunter werden die Bedeutungsebenen von Requisiten in semiotischer Hinsicht aufgeklärt. Zudem werden vier Funktionen für die Einordnung von Requisiten gebildet. Mithilfe der semiotischen Kategorien und der erweiterten Bedeutungsfunktionen wird ein theoretisches Modell zur Analyse von Requisiten entwickelt. Nach der anschließenden Vorstellung des Filmprojekts Kamera Head werden ausgewählte Requisiten mittels der Zeichentheorie und der Bedeutungsfunktionen analysiert und in das erstellte Modell eingeordnet.}}, author = {{Koopmann, Adele}}, pages = {{86}}, publisher = {{Technische Hochschule Ostwestphalen-Lippe}}, title = {{{Bedeutungsebenen von Requisiten im Spielfilm, untersucht anhand eines praktischen Beispiels: Kamera-Head}}}, year = {{2025}}, } @misc{12918, author = {{Frühwald-König, Katja}}, location = {{Merzenich-Bürgewald}}, title = {{{Holz = Baustoff der Zukunft! Moderner Holzbau: Neue Werkstoffe und Bearbeitungsverfahren - Neue Wege gehen und Grenzen überwinden}}}, year = {{2025}}, } @misc{12919, author = {{Frühwald-König, Katja}}, location = {{NRW-Stage auf der Ligna Hannover}}, title = {{{Impulsvortrag auf der Podiumsveranstaltung}}}, year = {{2025}}, }