@article{2505,
abstract = {{Das DIW Berlin rechnet für 2010 und 2011 mit einem Wachstum des realen Bruttoinlandsprodukts von 1,7 und 1,8 Prozent. Damit setzt die deutsche Wirtschaft ihren moderaten Erholungskurs der vergangenen Quartale fort. Zwar hat die Produktion im Winter überraschenderweise nur stagniert, dies ist aber auf Sondereffekte etwa im Zusammenhang mit den Konjunkturprogrammen zurückzuführen. Angesichts des moderaten Wachstumstempos wird die Wirtschaftskraft am Ende des Prognosezeitraums 2011 nur noch leicht unter dem Vorkrisenniveau liegen. Getrieben wird die leichte Erholung der Konjunktur 2010 größtenteils von der Auslandsnachfrage; rund zwei Drittel der Zunahme der Produktion dürften aus der Verbesserung des Außenbeitrags kommen. 2011 ist dagegen die Binnennachfrage der stärkste Wachstumstreiber. Während der private Konsum 2010 aufgrund der vorhandenen Arbeitsplatzunsicherheit und niedriger Lohnabschlüsse noch schwach bleibt, ist 2011 mit einem Zuwachs von einem Prozent zu rechnen. Der massive Rückgang der Wirtschaftsleistung 2009 hat sich weit weniger als befürchtet auf die Entwicklung der Beschäftigung ausgewirkt. Der wichtigste Grund dafür war, dass die Krise weitgehend auf den Exportsektor begrenzt blieb. Derzeit spricht viel dafür, dass die Talsohle auf dem Arbeitsmarkt bereits durchschritten ist und sich sogar ein leichter Rückgang der Arbeitslosigkeit einstellen wird. Mit einem kräftigen Aufschwung bei der Beschäftigung ist allerdings nicht zu rechnen. Zwar liegt das Wachstum im Prognosezeitraum über der Schwelle, ab der Beschäftigung aufgebaut wird, der vorherige Absturz der Produktion steht aber einem deutlichen Zuwachs der Beschäftigung entgegen. Die Lage der öffentlichen Haushalte bleibt hochgradig angespannt. Tatsächlich ist 2010 und 2011 eher mit geringeren Steuereinnahmen zu rechnen, als dies noch zur Jahreswende prognostiziert worden war. Dadurch wird die Konsolidierung der öffentlichen Finanzen nochmals erschwert, sodass kein Spielraum für Steuersenkungen best}},
author = {{Dreger, Christian and Belke, Ansgar and Bernoth, Kerstin and von Blanckenburg, Korbinian and Bremus, Franziska and Brenke, Karl and Colavecchio, Roberta and Fichtner, Ferdinand and Hagedorn, Hendrik and Kuzin, Vladimir}},
issn = {{1860-8787}},
journal = {{DIW Wochenbericht}},
keywords = {{Business Cycle forecast, Economic Outlook}},
number = {{15}},
pages = {{2--26}},
publisher = {{Deutsches Institut für Wirtschaftsforschung e.V. (DIW Berlin)}},
title = {{{Frühjahrsgrundlinien 2010}}},
volume = {{77}},
year = {{2010}},
}
@article{2522,
author = {{Stiebing, Achim and Weyland, Gerd}},
journal = {{Fleischwirtschaft}},
number = {{9}},
pages = {{57 -- 61}},
title = {{{Was ist erlaubt, was verboten? : 5. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 3}}},
volume = {{89}},
year = {{2010}},
}
@article{2528,
author = {{Stiebing, Achim and Weyland, Gerd}},
journal = {{Fleischwirtschaft}},
number = {{9}},
pages = {{57 -- 61}},
title = {{{Was ist erlaubt, was verboten? : 5. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 3}}},
volume = {{89}},
year = {{2010}},
}
@article{2530,
author = {{Stiebing, Achim and Weyland, Gerd}},
journal = {{Fleischwirtschaft}},
number = {{8}},
pages = {{46 -- 49}},
title = {{{Was ist erlaubt, was verboten? 5. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 2}}},
volume = {{89}},
year = {{2010}},
}
@inproceedings{2568,
author = {{Gnegel, M. and Upmann, Matthias and Becker, Barbara and Seafkow, M.}},
title = {{{Einsatz des aquagroup Ifluenzverfahren (ai) in einre Messerdesinfektionsanlage zur Reinigung und Desinfektion von Schlachtmessern}}},
year = {{2010}},
}
@inproceedings{2569,
author = {{Upmann, Matthias}},
booktitle = {{Fortbildung Hygiene- und Qualitätsmanagement für Tierärzte}},
location = {{Hannover}},
title = {{{Lebensmittelhygiene: Fleisch}}},
year = {{2010}},
}
@article{2630,
abstract = {{The anaplerotic odd-medium-chain triglyceride triheptanoin is used in clinical trials for the chronic dietary treatment of patients with long-chain fatty acid oxidation disorders. We previously showed (Kinman RP, Kasumov T, Jobbins KA, Thomas KR, Adams JE, Brunengraber LN, Kutz G, Brewer WU, Roe CR, Brunengraber H. Am J Physiol Endocrinol Metab 291: E860–E866, 2006) that the intravenous infusion of triheptanoin increases lipolysis traced by the turnover of glycerol. In this study, we tested whether lipolysis induced by triheptanoin infusion is accompanied by the potentially harmful release of long-chain fatty acids. Rats were infused with heptanoate ± glycerol or triheptanoin. Intravenous infusion of triheptanoin at 40% of caloric requirement markedly increased glycerol endogenous Ra but not oleate endogenous Ra. Thus, the activation of lipolysis was balanced by fatty acid reesterification in the same cells. The liver acyl-CoA profile showed the accumulation of intermediates of heptanoate β-oxidation and C5-ketogenesis and a decrease in free CoA but no evidence of metabolic perturbation of liver metabolism such as propionyl overload. Our data suggest that triheptanoin, administered either intravenously or intraduodenally, could be used for intensive care and nutritional support of metabolically decompensated long-chain fatty acid oxidation disorders.}},
author = {{Gu, Lei and Zhang, Guo-Fang and Kombu, Rajan S. and Allen, Frederick and Kutz, Gerd and Brewer, Brewer and Roe, Charles R. and Brunengraber, Henri}},
issn = {{1522-1555}},
journal = {{American journal of physiology : Endocrinology and metabolism}},
number = {{2}},
pages = {{E362 -- E371}},
publisher = {{APS}},
title = {{{Parenteral and Enteral Metabolism of Anaplerotic Triheptanoin in Normal Rats. II. Effects on lipolysis, glucose production and liver acyl-CoA profile}}},
doi = {{https://doi.org/10.1152/ajpendo.00384.2009}},
volume = {{298}},
year = {{2010}},
}
@inproceedings{2711,
author = {{Kutz, Gerd}},
title = {{{Formulierungskonzepte für Emulsionen - ausgewählte Beispiele : Emulsionen -Formulierung Herstellung Charakterisierung}}},
year = {{2010}},
}
@misc{3972,
author = {{Schulte, Thomas}},
title = {{{Schaltung zur Nachbildung einer elektrischen Last}}},
year = {{2010}},
}
@article{4047,
abstract = {{Die aus derAutomobilelektronik bekannte Hardware-in-the-Loop-SimulationzumTesten der Hard-und SoftwarevonSteuergeräfen hält nun auch Einzug in die Testlabare der Herste/lervon elektrischen Antrieben. HILSimulation bedeutet hier, dass einer zu testenden Serienrege/einrichtung eine nicht real vorhandene Rege/strecke über ein Echtzeitsystem mit entsprechender Peripherie simuliert wird. Der damit erreichte Automatisierungsgrad bei der Durchführung von Softwajetests erschließt erhebliche Einsparpotentiafe und ermöglicht kürzere Entwicklungszeiten.}},
author = {{Schulte, Thomas and Wertz, Harald}},
issn = {{0341-2652}},
journal = {{Antriebstechnik}},
number = {{5}},
pages = {{16 -- 19}},
publisher = {{Vereinigte Fachverl.}},
title = {{{Im virtuellen Testlabor : Echtzeitsimulation von Antrieben eraffnet Einsparpotentiale}}},
year = {{2010}},
}
@inproceedings{4212,
author = {{Balzer, Eugen and Borcherding, Holger and Grabe, Heyno}},
booktitle = {{EMV 2010: Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit 09.-11.März 2010}},
isbn = {{978-3-8007-3206-7}},
location = {{Düsseldorf}},
publisher = {{VDE-Verlag}},
title = {{{Messung der Netzimpedanz im Frequenzbereich bis 20 kHz und Analyse der Oberschwingungen bis zur 200. Harmonischen in verschiedenen Niederspannungsnetzen.}}},
year = {{2010}},
}
@inproceedings{4213,
abstract = {{Currently there are general limits for conducted emissions only in the frequency range up to 2 kHz [1],[2] and above 150 kHz [3]. Limits for the frequency range from 2 kHz to 9 kHz are in discussion. Because of this mentioned gap in the standards there is an uncertainty how to design filters and disturbance sources like converters. For finding limits investigations are necessary on mains impedances and harmonics. There are older publications on mains impedances (e. g. [4], [5]), but they include only measurements of impedances between one phase and neutral conductor and no measurements of impedances between the phases. This is important for three-phase loads. Furthermore in [4] no measurements were made in industrial mains and the investigations were carried out more than one decade ago. Especiaily in the last years the electrical environment in the mains has changed because of the increasing number of self-commutated converters. Accordingly, much higher amplitudes for harmonics in the upper frequency range are identifiable. In this paper current investigations on mains impedances and harmonics are presented which were carried out in universities, companies and private houses. The results could be used as a base for finding limits and for designing filters and disturbance sources economicaily.}},
author = {{Borcherding, Holger and Balzer, Eugen and Garbe, Heyno}},
booktitle = {{Proceedings - PCIM Europe 2010}},
isbn = {{978-3-8007-3229-6}},
location = {{Exhibition Centre Nuremberg}},
pages = {{631 -- 635}},
title = {{{Measurements of mains impedances in the frequency range up to 20 kHz and analysis of harmonics up to 10kHz in low voltage mains}}},
year = {{2010}},
}
@article{4435,
author = {{Feldbusch, Natalja and Kutz, Gerd and Feiler, Stefanie and Solot, Philippe}},
issn = {{0009-2800 }},
journal = {{Chemie, Anlagen, Verfahren : CAV ; die Zeitschrift für Chemie- und Pharmatechnik }},
number = {{8}},
pages = {{54--55}},
publisher = {{Konradin-Verl. Kohlhammer }},
title = {{{Zwei auf einen Streich - Schnelle Identifikation wichtiger Parameter mittels Versuchsplanung}}},
volume = {{43}},
year = {{2010}},
}
@misc{4436,
author = {{Antonov, D. and Seyfarth, F. and Schliemann, S. and Terhaer, F. and Bock, M. and John, S. M. and Kleesz, P. and Pohlmann, D. and Kutz, Gerd and Elsner, P.}},
booktitle = {{Dermatologie in Beruf und Umwelt}},
issn = {{1616-7090}},
number = {{Nr. 2}},
pages = {{S. 90}},
publisher = {{Dustri-Verlag Dr. Karl Feistle GmbH}},
title = {{{Development of a test model for occupational hand-cleansers to quantify cleansing efficacy in relation to irritant otential}}},
volume = {{58}},
year = {{2010}},
}
@inproceedings{4454,
author = {{Kumar, Barath and Niggemann, Oliver and Jasperneite, Jürgen}},
location = {{Cape Town, South Africa}},
title = {{{Statistical Models of Network Traffic}}},
year = {{2010}},
}
@inproceedings{4455,
author = {{Niggemann, Oliver and Maier, Alexander and Jasperneite, Jürgen}},
title = {{{Model-based Development of Automation Systems}}},
year = {{2010}},
}
@inproceedings{4458,
author = {{Czybik, Björn and Kumar, Barath and Jasperneite, Jürgen}},
location = {{Lemgo}},
title = {{{Automatic derivation of TTCN-3 test cases from UML state machines}}},
year = {{2010}},
}
@article{4463,
author = {{Kumar, Barath and Jasperneite, Jürgen}},
journal = {{Journal of Object Technology }},
title = {{{UML Profiles for Modeling Real-Time Communication Protocols}}},
year = {{2010}},
}
@inproceedings{4464,
author = {{Kumar, Barath and Niggemann, Oliver and Jasperneite, Jürgen}},
location = {{Magdeburg, Germany}},
title = {{{Test Generation for Hybrid, Probabilistic Control Models}}},
year = {{2010}},
}
@inproceedings{4465,
author = {{Kumar, Barath and Jasperneite, Jürgen}},
location = {{Magdeburg, Germany}},
title = {{{MARTE's Schedulability sub-package (SAM): From theory to implementation}}},
year = {{2010}},
}
@inproceedings{4466,
author = {{Imtiaz, Jahanzaib and Wisniewski, Lukasz and Jasperneite, Jürgen and Weber, Karl}},
location = {{Nancy, France}},
title = {{{A Layer-2 Multicast Forwarding Policy for a Generic Real-time Ethernet System}}},
year = {{2010}},
}
@inproceedings{4467,
author = {{Dominguez, Ivan and Wisniewski, Lukasz and Trsek, Henning and Jasperneite, Jürgen}},
location = {{Nancy, France}},
title = {{{Link-Layer Retransmissions in IEEE 802.11g based Industrial Networks}}},
year = {{2010}},
}
@inproceedings{4472,
author = {{Kutz, Gerd}},
location = {{Hochschule-Ostwestfalen Detmold}},
title = {{{Emulsionen}}},
year = {{2010}},
}
@inproceedings{4473,
author = {{Kutz, Gerd}},
location = {{Hochschule Ostwestfalen-Lippe Detmold}},
title = {{{Praktikum: Aseptisches Arbeiten}}},
year = {{2010}},
}
@inproceedings{4489,
abstract = {{In this paper we delineate and compare the functional and structural potential but also shortcomings of two Ambient Assisted Living (AAL) systems, which aim at providing remote care for elder adults living independently at home. One system, a personal emergency response system, is already in use, the other system, the Future Care Lab, presents a holistic tele-medical care setting, which is currently in its conceptualization and test phase at RWTH Aachen University. By learning from the experience with a well-established system in both, restrictions and benefits, implications for a user-centred development for future telemedical systems can be derived.}},
author = {{Beul, Shirley and Klack, Lars and Kasugai, Kai and Möllering, Christina and Röcker, Carsten and Wilkowska, Wiktoria and Ziefle, Martina}},
booktitle = {{Electronic Healthcare}},
editor = {{Szomszor, Martin and Kostkova, Patty }},
isbn = {{978-3-642-23634-1 }},
keywords = {{eHealth, Ambient Assisted Living Telemonitoring, Telecare, Future Care Lab, Personal Emergency Response System, PERS}},
location = {{Casablanca, Morocco}},
pages = {{111--118}},
title = {{{Between Innovation and Daily Practice in the Development of AAL Systems: Learning from the Experience with Today’s Systems}}},
doi = {{10.1007/978-3-642-23635-8_14}},
volume = {{69}},
year = {{2010}},
}
@inproceedings{4490,
abstract = {{This paper reports on a cross-cultural user study, which analyzes the perception of concerns commonly associated with technology-enhanced environments. The results of the study show that the concerns addressed in state-of-the-art literature do only partially reflect the concerns of potential users. The analysis also shows that the perception is significantly influenced by several factors. Especially the participants' cultural background has a significant influence on the perception of most concerns.}},
author = {{Röcker, Carsten}},
booktitle = {{Proceedings of the Second International IEEE Conference on Computer and Automation Engineering (ICCAE'10)}},
editor = {{Mahadevan, V. and Jianhong, Z.}},
isbn = {{978-1-4244-5585-0 }},
keywords = {{Ubiquitous any Pervasive Computing, Ambient Intelligence, Intelligent Environments, Smart Spaces, Technology Acceptance, User Stuyy, Evaluation}},
location = {{Singapore}},
pages = {{513 -- 517}},
publisher = {{IEEE}},
title = {{{Living and Working in Automated Environments - Evaluating the Concerns of End-Users in Technology-Enhanced Spaces}}},
doi = {{10.1109/ICCAE.2010.5451637}},
year = {{2010}},
}
@inproceedings{4491,
abstract = {{This paper reports on a cross-national user study exploring the influence of the social work situation on the preferred level of control over IT services in smart office environments. The acceptance of different control mechanisms was tested for representative functionalities with participants from Germany and the USA. The results of the questionnaire-based study show, that the social situation, in which a certain application is used, has a significant effect on the preferred level of user control.}},
author = {{Röcker, Carsten}},
booktitle = {{2nd International Conference on Mechanical and Electrical Technology (ICMET), 2010 }},
isbn = {{9781424481002}},
keywords = {{Ambient Intelligence, Ubiquitous and Pervasive Computing, User Interface, Intelligent Environments, Human-Computer Interaction, User Study, Evaluation}},
location = {{Singapore}},
pages = {{314 -- 318}},
publisher = {{IEEE}},
title = {{{Socially Dependent Interaction in Smart Spaces: How the Social Situation Influences the Interaction Style in Computer-Enhanced Environments}}},
doi = {{10.1109/ICMET.2010.5598371}},
year = {{2010}},
}
@inproceedings{4492,
abstract = {{In most countries demographic developments tend towards more and more elderly people in single households. Improving the quality of life for elderly people is an emerging issue within our information society. Good user interfaces have tremendous implications for appropriate accessibility. Though, user interfaces should not only be easily accessible, they should also be useful, usable and most of all enjoyable and a benefit for people. Traditionally, Human–Computer Interaction (HCI) bridges Natural Sciences (Psychology) and Engineering (Informatics/Computer Science), whilst Usability Engineering (UE) is anchored in Software Technology and supports the actual implemen-tation. Together, HCI and UE have a powerful potential to help towards making technology a little bit more accessible, useful, useable and enjoyable for everybody.}},
author = {{Holzinger, Andreas and Ziefle, Martina and Röcker, Carsten}},
booktitle = {{Computers Helping People with Special Needs, Part II}},
editor = {{ Miesenberger, K. and Klaus, J. and Zagler, W. and Karshmer, A.}},
isbn = {{978-3-642-14099-0}},
keywords = {{Human–Computer Interaction, Usability Engineering, User Interfaces, Elderly People, Older Adults}},
location = {{Vienna, Austria}},
pages = {{556--559}},
publisher = {{Springer}},
title = {{{Human-Computer Interaction and Usability Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session}}},
doi = {{10.1007/978-3-642-14100-3_83}},
volume = {{6180}},
year = {{2010}},
}
@article{4493,
abstract = {{This paper provides an introduction into the evolution of information and communication technology and illustrates its usage in the work domain. The paper is sub-divided into two parts. The first part gives an overview over the different phases of information processing in the work domain. It starts by charting the past and present usage of computers in work environments and shows current technological trends, which are likely to influence future business applications. The second part starts by briefly describing, how the usage of computers changed business processes in the past, and presents first Ambient Intelligence applications based on identification and localization information, which are already used in the production and retail sector. Based on current systems and prototype applications, the paper gives an outlook of how Ambient Intelligence technologies could change business processes in the future. }},
author = {{Röcker, Carsten}},
issn = {{1307-6892}},
journal = {{International Journal of Information and Communication Engineering}},
keywords = {{Ubiquitous Computing, Ambient intelligence, business applications, Radio Frequency Identification (RFID)}},
number = {{7}},
pages = {{1830 -- 1841}},
publisher = {{World Academy of Science, Engineering and Technology, WASET }},
title = {{{Chances and Challenges of Intelligent Technologies in the Production and Retail Sector}}},
doi = {{10.5281/zenodo.1063024}},
volume = {{4}},
year = {{2010}},
}
@inproceedings{4494,
abstract = {{This paper gives an overview of how the role of architecture, design, and HCI is to be redefined in a world of ubiquitous computing and the recent advances in display technology. It describes the future care lab and our take on research in this field. We elaborate on how wall-sized displays can form an integral part of an ambient intelligence space that aims to assist the elderly and empower them to stay longer in their familiar surroundings before moving into nursing homes. We propose a classification of different concepts that virtually extend a real environment and describe some possible scenarios.}},
author = {{Kasugai, Kai and Ziefle, Martina and Röcker, Carsten and Russell, Peter}},
booktitle = {{Proceedings of Create’10 - Innovative Interactions}},
editor = {{Bonner,, J. and O’Neill, M. and Mival, O.}},
keywords = {{mixed reality, immersive co-location, ambient assisted living, architecture, smart spaces, spatial extension}},
location = {{Loughborough, UK}},
pages = {{40--45}},
title = {{{Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment}}},
doi = {{10.14236/ewic/CREATE2010.8}},
year = {{2010}},
}
@inproceedings{4495,
abstract = {{This paper illustrates why existing technology acceptance models are only of limited use for predicting and explaining the adoption of future information and communication technologies. It starts with a general overview over technology adoption processes, and presents several theories for the acceptance as well as adoption of traditional information technologies. This is followed by an overview over the recent developments in the area of information and communication technologies. Based on the arguments elaborated in these sections, it is shown why the factors used to predict adoption in existing systems, will not be sufficient for explaining the adoption of future information and communication technologies.}},
author = {{Röcker, Carsten}},
booktitle = {{Proceedings of the International Conference on Intelligent Systems (ICIS'10), Part 1}},
issn = {{1307-6892}},
keywords = {{Technology Diffusion, Technology Acceptance Models, Ambient Intelligence, Ubiquitous and Pervasive Computing}},
location = {{Tokyo, Japan}},
number = {{5}},
pages = {{490 -- 496}},
publisher = {{World Academy of Science, Engineering and Technology, WASET}},
title = {{{Why Traditional Technology Acceptance Models Won't Work With Future Information Technologies}}},
doi = {{10.5281/zenodo.1078965}},
volume = {{41}},
year = {{2010}},
}
@inproceedings{4496,
abstract = {{While pervasive healthcare systems bear the potential to provide patients with a new quality of medical homecare, the complexity of such systems raises fundamental questions of behavior, communication and technology acceptance. This is especially important, as users of future healthcare systems will be increasingly characterized by diversity. Relying only on highly experienced and technology-prone user groups, which might have been typical users in the last decades, is not sufficient anymore. Rather, elderly users, users with a completely different upbringing and domain knowledge, and ill or handicapped people will have to use the systems. Today, the understanding, in which way physical, emotional and cognitive abilities, caused by individual learning histories and health states, may impact the usage and acceptance of pervasive healthcare technologies, is restricted. This research contributes to this topic by investigating the acceptance motives of aged users with different health states regarding three different implementation concepts for medical technologies: medical technology implemented in mobile devices, smart environments and smart clothing. Using the questionnaire method, a total of 82 users between 40 and 92 years of age were examined regarding their usage motives and barriers with respect to the different technology concepts. Overall, it was revealed that acceptance issues and users' needs and wants should be considered in order to successfully design new medical technologies.}},
author = {{Ziefle, Martina and Röcker, Carsten}},
booktitle = {{Proceedings of the 4th International ICST Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth’10), Munich, Germany, March 22-25, CD-ROM}},
keywords = {{Pervasive and Ubiquitous Computing, AmbientAssisted Living, Technology Acceptance, Health Study}},
location = {{München, Germany}},
publisher = {{IEEE}},
title = {{{Acceptance of Pervasive Healthcare Systems: A Comparison of Different Implementation Concepts}}},
doi = {{10.4108/ICST.PERVASIVEHEALTH2010.8915}},
year = {{2010}},
}
@inproceedings{4497,
abstract = {{This paper presents a cross-cultural study analyzing the willingness of users to share context information in work environments. The focus of the study is on three aspects: the general willingness to provide different types of context information, the acceptance of manual and automated data capturing mechanisms and the identification of personal and cultural differences among users. The results of the study show that potential users are rather reluctant to provide context information, especially if the data is automatically captured by the system, and that the willingness to provide context information differs significantly between user groups with different cultural backgrounds and different degrees of computer knowledge.}},
author = {{Röcker, Carsten}},
booktitle = {{Computational Science and Its Applications – ICCSA 2010}},
editor = {{Taniar, David and Gervasi, Osvaldo and Murgante, Beniamino and Pardede, Eric and Apduhan, Bernady O. }},
isbn = {{978-3-642-12188-3}},
keywords = {{Context-Awareness, Privacy, Ubiquitous Computing, Pervasive Computing, Ambient Intelligence, Evaluation, Technology Acceptance}},
location = {{Fukuoka, Japan}},
pages = {{93--106}},
publisher = {{Springer}},
title = {{{Information Privacy in Smart Office Environments: A Cross-Study Analyzing the Willingness of Users to Share Context Information}}},
doi = {{10.1007/978-3-642-12189-0_9}},
volume = {{6019}},
year = {{2010}},
}
@inproceedings{4498,
abstract = {{This paper reports on a survey of state-of-the-art application scenarios for smart office environments. Based on an analysis of ongoing research activities and industry projects, functionalities and services of future office systems are extracted. In a second step, these results are used to identify the key characteristics of emerging products. }},
author = {{Röcker, Carsten}},
booktitle = {{Proceedings of the International Conference on Computer and Information Technology (ICCIT'10)}},
keywords = {{Ubiquitous Computing, Ambient intelligence, Smart Office Environment, Application Scenarios}},
location = {{Cape Town, South Africa}},
pages = {{35--401}},
title = {{{Services and Applications for Smart Office Environments - A Survey of State-of-the-Art Usage Scenarios}}},
doi = {{10.5281/zenodo.1078843}},
year = {{2010}},
}
@inproceedings{4499,
abstract = {{Dieser Beitrag beschreibt das Programm „eHealth – Enhancing Mobility with Aging“, ein interdisziplinäres For-
schungsprojekt an der RWTH Aachen, dessen Schwerpunkt auf der Konzeption, Entwicklung und dem Design adaptiver, in das häusliche Umfeld integrierbarer medizinischer Assistenzsysteme liegt. Die Vision des Projektes ist die eines umfassenden, vielschichtigen, persönlichen Assistenzsystems, welches Patienten mit zunehmendem Alter in die Lage versetzen soll, ihre Mobilität und Unabhängigkeit auch im hohen Alter und trotz chronischer Erkrankungen (Fokus auf Erkrankungen des Herz-Kreislaufsystems) beizubehalten. Ziel des Projektes ist die systematische Analyse und Optimierung einer technischen Systemlösung, bei der medizinische, technische, aber auch kommunikative, psychologische, soziale und architektonische Komponenten gleichermaßen berücksichtigt werden und in ihren Auswirkungen auf die Anforderungen für das Design, die Nutzung und Akzeptanz medizinischer Assistenzsysteme untersucht werden. }},
author = {{Klack, Lars and Kasugai, Kai and Schmitz-Rohde, Thomas and Röcker, Carsten and Ziefle, Martina and Möllering, Christian and Jakobs, Eva-Maria and Russell, Peter and Borchers, Jan}},
booktitle = {{Ambient assisted living : Tagungsbandbeiträge / 3. Deutscher AAL-Kongress mit Ausstellung Assistenzsysteme im Dienste des Menschen - Zuhause und Unterwegs}},
isbn = {{978-3-8007-3209-8}},
location = {{Berlin}},
publisher = {{VDE-Verl. }},
title = {{{Ein persönliches Assistenzsystem für ältere Nutzer mit chronischen Herzerkrankungen}}},
year = {{2010}},
}
@article{4500,
abstract = {{This paper identifies social and technological concerns, which are likely to emerge through the integration of Ubiquitous Computing technologies in future work environments. The concerns presented in this paper were collected by reviewing relevant literature from different research domains and are clustered into two groups. The first group of concerns concentrates on the violation of individual user privacy and the consequences, which arise from these privacy breaches. The second group addresses environmental and societal transformation processes caused by a large-scale penetration of future information and communication technologies into everyday life. }},
author = {{Röcker, Carsten}},
issn = {{1529-7314 }},
journal = {{Issues in information systems : IIS / International Association für Computer Information Systems, IACIS }},
keywords = {{Ubiquitous and Pervasive Computing, Ambient Intelligence, Human Factors, Technology Acceptance, User Requirements}},
number = {{1}},
pages = {{pp. 61 -- 68}},
title = {{{Social and Technological Concerns Associated with the Usage of Ubiquitous Computing Technologies}}},
doi = {{10.48009/1_iis_2010_61-68}},
volume = {{11}},
year = {{2010}},
}
@inproceedings{4501,
abstract = {{This paper describes first steps in the design process of an open and integrative test bed for studying the acceptance of Ambient Assisted Living technologies. The research work reported in this paper was conducted within the project “eHealth - Enhancing Mobility with Aging”, an interdisciplinary research project funded by the Excellence Initiative of the German Federal and State Governments. In the first part of the paper, several formative studies are described, which were conducted in order to analyze personal and medical needs of potential end users, as well as the habits they have in dealing with their illnesses. The insights gained in these studies were used to define fundamental requirements for the design of an intelligent home environment. The second part of the paper shows how the concept was realized and presents several technical prototypes of intelligent home components.}},
author = {{Röcker, Carsten and Wilkowska, Wiktoria and Ziefle, Martina and Kasugai, Kai and Klack, Lars and Möllering, Christian and Beul, Shirley}},
booktitle = {{Proceedings of the 18th Biennial Conference of the International Communications Society: Culture, Communication and the Cutting Edge of Technology}},
keywords = {{Ambient Intelligence, Ambient Assisted Livin, Ubiquitous Computing, User Interfaces, User-Centered Design, User Study}},
location = {{Tokyo, Japan}},
title = {{{Towards Adaptive Interfaces for Supporting Elderly Users in Technology-Enhanced Home Environments}}},
year = {{2010}},
}
@inproceedings{4515,
author = {{Kumar, Barath and Jäger, Michael and Jasperneite, Jürgen}},
location = {{Nancy, France}},
title = {{{A Proposal for Graphical Extension of TTCN-3 Graphical Presentation Format (GFT)}}},
year = {{2010}},
}
@inproceedings{4516,
author = {{Han, Lixue and Jasperneite, Jürgen and Werner, Thomas}},
location = {{Nancy, France}},
title = {{{DIVAN: A Network Calculator for the Off-line Performance Analysis of Virtual Automation Networks}}},
year = {{2010}},
}
@inproceedings{4517,
author = {{Jasperneite, Jürgen}},
location = {{Karlsruhe}},
title = {{{Durchgängiger flexibler Datenaustausch zwischen Feldebene und MES}}},
year = {{2010}},
}
@inproceedings{4519,
author = {{Jasperneite, Jürgen}},
location = {{Lemgo}},
title = {{{Anforderungen wandlungsfähiger Produktionstechnik an die Automation}}},
year = {{2010}},
}
@article{4520,
author = {{Sauer, Olaf and Jasperneite, Jürgen}},
journal = {{ZWF (Zeitschrift für wirtschaftlichen Fabrikbetrieb)}},
title = {{{Wandlungsfähige Informationstechnik in der Fabrik}}},
volume = {{9}},
year = {{2010}},
}
@inproceedings{4521,
author = {{Imtiaz, Jahanzaib and Jasperneite, Jürgen and Weber, Karl}},
location = {{Bilbao, Spain }},
title = {{{Redundant Structures for a Generic Real-time Ethernet System}}},
year = {{2010}},
}
@inproceedings{4522,
author = {{Wisniewski, Lukasz and Borzemski, Leszek and Jasperneite, Jürgen}},
location = {{Szklarska Poreba, Poland }},
title = {{{A New Scheduling Wireless Communication Mechanism in Cellular Systems Based on Genetic Approach}}},
year = {{2010}},
}
@inproceedings{4523,
author = {{Schäfermann, Mark and Trsek, Henning and Jasperneite, Jürgen}},
location = {{Bochum}},
title = {{{Untersuchung von Mobilfunknetzen für zuverlässige M2M-Anwendungen}}},
year = {{2010}},
}
@proceedings{4524,
editor = {{Jasperneite, Jürgen and Jumar, Ulrich}},
title = {{{Fachkolloquium Kommunikation in der Automation (KommA 2010)}}},
year = {{2010}},
}
@inproceedings{4525,
author = {{Schäfermann, Mark and Jasperneite, Jürgen}},
location = {{Lemgo}},
title = {{{Evaluierung von 2G und 3G Mobilfunknetzen für M2M-Anwendungen}}},
year = {{2010}},
}
@book{8199,
author = {{Knepper-Bartel, Yvonne-Christin}},
publisher = {{Forschungsgesellschaft Landschaftsentwicklung Landschaftsbau e. V. (FLL)}},
title = {{{Empfehlungen für Baumpflanzungen – Teil 2: Standortvorbereitung für Neupflanzungen: Pflanzgruben und Wurzelraumerweiterung, Bauweisen und Substrate}}},
year = {{2010}},
}
@misc{8277,
author = {{Ahmad, K. and Ostfeld, P. and Meier, Uwe and Kwasnicka, H.}},
booktitle = {{IEEE Transactions on Industrial Informatics, Special Section on: Industrial Communication Systems, Vol. 6, No. 4, November 2010}},
publisher = {{IEEE Transactions on Industrial Informatics}},
title = {{{Exploitation of Multiple Hyperspace Dimensions to Realize Coexistence Optimized Wireless Automation Systems}}},
year = {{2010}},
}
@misc{8278,
author = {{Ahmad, K. and Shresta, G. M. and Meier, Uwe}},
booktitle = {{15th IEEE Conference on Emerging Technologies and Factory Automation - ETFA 2010, Bilbao, Spain}},
publisher = {{IEEE Conference on Emerging Technologies and Factory Automation - ETFA}},
title = {{{Coexistence Optimized Cognitive Engine (COCE)}}},
year = {{2010}},
}
@misc{8279,
author = {{Ahmad, K. and Shresta, G. M. and Meier, Uwe and Kwasnicka, H.}},
booktitle = {{7th International Symposium on Wireless Communication Systems - ISWCS 2010, York, United Kingdom}},
publisher = {{International Symposium on Wireless Communication Systems - ISWCS}},
title = {{{Neuro-Fuzzy Signal Classifier (NFSC) for Standard Wireless Technologies}}},
year = {{2010}},
}
@misc{8280,
author = {{Neufeld, P. and Block, D. and Meier, Uwe}},
booktitle = {{12. Wireless Technologies Kongress, Bochum, September 2010}},
publisher = {{Wireless Technologies Kongress}},
title = {{{Echtzeitfähige Vermessung und Emulation industrieller Funkkanäle}}},
year = {{2010}},
}
@misc{8281,
author = {{Ahmad, K. and Meier, Uwe and Kwasnicka, H.}},
booktitle = {{5th International Conference on Cognitive Radio Oriented Wireless Networks and Communications - CrownCom 2010, Cannes, France}},
publisher = {{Conference on Cognitive Radio Oriented Wireless Networks and Communications - CrownCom}},
title = {{{Fuzzy Logic Based Signal Classification with Cognitive Radios for Standard Wireless Technologies}}},
year = {{2010}},
}
@misc{8313,
author = {{Rabe, Heinrich}},
publisher = {{Technische Hochschule OWL}},
title = {{{Einsatz von XML-Technologien zur Steuerung und Definition von Testfällen in einer Benchmarkumgebung für Javacards}}},
year = {{2010}},
}
@misc{8314,
author = {{Badinger, Johann}},
publisher = {{Technische Hochschule OWL}},
title = {{{Entwicklung eines IPsec-Konfigurationstools}}},
year = {{2010}},
}
@misc{8315,
author = {{Morlang, Viktor}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe}},
title = {{{Entwicklung eines Gerätetreibers in der Programmiersprache C für einen Nios II IP-Core zur Kommunikation mit SmartCards nach ISO/IEC 7816-3}}},
year = {{2010}},
}
@misc{8317,
author = {{Walter, Thomas}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe}},
title = {{{Entwicklung der Basis-Firmware eines Analysators für den Lokalbus einer sicherheitsgerichteten SPS}}},
year = {{2010}},
}
@misc{9053,
author = {{Bayer, Veronika}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Wärmeschutztechnische Eigenschaften von Lehm – Thermische Bemessung und rechnerische Validierung}}},
year = {{2010}},
}
@misc{9054,
author = {{Hickert, Sascha}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Thermisch-hygrisches Verhalten von Außenwandkonstruktionen mit diffusionsoffener Innendämmung}}},
year = {{2010}},
}
@misc{9055,
author = {{Wiegel , Christian }},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Evaluation of thermal comfort relatet to facade integrated active cooling devices based on phase change materials}}},
year = {{2010}},
}
@misc{9056,
author = {{Mörchen , Henning }},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Einflussgrößen von Dichtungssystemen auf die Schalldämmung von stumpfen Türen}}},
year = {{2010}},
}
@misc{9057,
author = {{Klein , Benjamin }},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{In -Situ - Verfahren der wärmeschutztechnischen Bestandsanalyse}}},
year = {{2010}},
}
@misc{9072,
author = {{Henrichsmeier , Christian}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Energieeinsparpotenzial einer Fassadensanierung an einem Beispielgebäude des Konzerns Wincor Nixdorf am Standort Paderborn}}},
year = {{2010}},
}
@misc{9073,
author = {{Mendoza, Dafne Zvi Zaldivar}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Thermal static analysis of glass facades fixed with clamp and glued fittings}}},
year = {{2010}},
}
@inproceedings{2729,
author = {{Kutz, Gerd and Walger, T.}},
location = {{Valletta (Malta)}},
title = {{{Optimisation of a Film Coating Process using Design of Experiments}}},
year = {{2010}},
}
@article{2748,
author = {{Schneider, Jan and Müller, Ulrich and Schwarzer, Knut and Becker, Barbara and Wilhelm, Patrick}},
issn = {{0934-9340}},
journal = {{Brauwelt International}},
number = {{5}},
pages = {{252 -- 256}},
publisher = {{Fachverlag Hans Carl GmbH}},
title = {{{Lemgo Database for D- and z-values: useful for beverage spoilage microorgansim}}},
year = {{2010}},
}
@article{2751,
author = {{Müller, Ulrich and Schwarzer, Knut and Dammann, Anna and Lange, Heinz and Krüger, Hans and David, Ricarda}},
journal = {{Zeitschrift für Arznei- und Gewürzpflanzen}},
number = {{2}},
pages = {{81 -- 85}},
publisher = {{Erling}},
title = {{{Entkeimung von Kapuzinerkresse (Tropaeolum majus L.) mittels »Mechanischer Sattdampfentkeimung«}}},
year = {{2010}},
}
@article{2754,
author = {{Müller, Ulrich and Schwarzer, Knut and Dammann, Anna and Lange, Heinz and Krüger, Hans}},
issn = {{1522-2640}},
journal = {{Chemie Ingenieur Technik}},
number = {{9}},
pages = {{1578 -- 1579}},
publisher = {{Wiley-VCH}},
title = {{{Wirkstoffgehalte von Medizinaldrogen nach mechanischen Sattdampfentkeimungen}}},
volume = {{82}},
year = {{2010}},
}
@article{2763,
author = {{Schwarzer, Knut and Schneider, Jan and Müller, Ulrich and Becker, Barbara and Wilhelm, Patrick}},
issn = {{ 0724-696X}},
journal = {{Brauwelt}},
number = {{18}},
pages = {{540 -- 544}},
publisher = {{Fachverlag Hans Carl GmbH}},
title = {{{Lemgoer Datenbank für D- und z-Werte: Anwendung für getränkeschädliche Mikroorganismen}}},
volume = {{150}},
year = {{2010}},
}
@book{2779,
author = {{Vetter, Andreas}},
isbn = {{9783887783471}},
keywords = {{Architektur / Innenarchitektur / Sitzm{\}},
publisher = {{Spurbuch-Verl.}},
title = {{{Sitzen: Über eine reizvolle Beziehung zwischen Mensch und Design}}},
volume = {{1}},
year = {{2010}},
}
@misc{2815,
author = {{Dercks, B. and Frahm, Björn and Grünewald, M. and Kenig, E. and Lautenschleger, A. and Gorak, A. and Schmidt, P. and Sudhoff, D. and Ressler, S. and Zecirovic, R.}},
booktitle = {{Proceedings 19th International Congress of Chemical and Process Engineering}},
isbn = {{978-80-02-02250-3}},
location = {{Prague, CZ}},
publisher = {{Czech Society of Chemical Engineering}},
title = {{{Intensified absorption and distillation devices for modular chemical production processes}}},
year = {{2010}},
}
@book{2858,
editor = {{Vetter, Andreas}},
isbn = {{3887783522}},
keywords = {{Badezimmer, Collage, Skizze}},
pages = {{75}},
publisher = {{Spurbuchverlag}},
title = {{{It's not bad: Kreative Raumkonzepte rund um die Wanne}}},
volume = {{2}},
year = {{2010}},
}
@misc{2873,
abstract = {{Die Erfindung betrifft ein Verfahren zur Reduzierung von Ablagerungen bei der Kultivierung von Organismen, insbesondere von Zellkulturen, welche zur Agglomeration bzw. Anhaftung an den Bioreaktor und seine Elemente neigen, oder bei denen Zelldebris oder Substanzen leicht agglomerieren bzw. anhaften.}},
author = {{Brod, Helmut and Frahm, Björn and Kauling, Jörg}},
pages = {{26}},
title = {{{Verfahren zur Reduzierung von Ablagerungen bei der Kultivierung von Organismen}}},
year = {{2010}},
}
@misc{2874,
abstract = {{Die Erfindung betrifft einen Bioreaktor, die Verwendung des Bioreaktors zur Kultivierung von Mikroorganismen oder Zellkulturen sowie ein Verfahren zur Kultivierung von Mikroorganismen oder Zellkulturen. }},
author = {{Brod, Helmut and Frahm, Björn and Jenne, Marc and Kauling, Jörg}},
pages = {{27}},
title = {{{Bioreaktor}}},
year = {{2010}},
}
@misc{2875,
abstract = {{Gegenstand der Erfindung ist ein neuartiges Begasungssystem, das insbesondere aber nicht ausschließlich in der Biotechnologie zur Versorgung von Zellen oder Mikroorganismen mit Sauerstoff einsetzbar ist. Das Begasungssystem umfasst eine Blasensäule und einen Verteiler. In dem Gefäß befindet sich ferner ein flüssiges Medium, das mit Gas versorgt werden soll. Es wird ein Vektor als Transportmittel für das Gas eingesetzt. Das Gas wird in die Blasensäule eingetragen und hier von dem Vektor aufgenommen. Der Vektor wird in Tropfenform über den Verteiler auf die Flüssigkeitsoberfläche aufgetragen, sinkt in dem Medium nach unten und gibt einen Teil des aufgenommenen Gases an das Medium ab. Am Boden des Gefäßes befindet sich eine Sammelvorrichtung, in der die Vektortropfen koaleszieren und wieder in die Blasensäule gelangen. Gegenstand der Erfindung ist weiterhin ein Bioreaktor umfassend das neuartige Begasungssystem. Gegenstand der Erfindung ist ferner ein Verfahren zur Begasung eines flüssigen Mediums, vorzugsweise einer Zellen oder Mikroorganismen enthaltenden wässrigen Suspension. }},
author = {{Frahm, Björn and Kauling, Jörg and Pütz, Andre and Schindler, Markus}},
pages = {{35}},
title = {{{Begasungssystem}}},
year = {{2010}},
}
@misc{2892,
author = {{Frahm, Björn and Brod, Helmut}},
location = {{Boston, USA}},
title = {{{Cultivation of sensitive cell lines - Improving bioreactor performance by Dynamic Membrane Aeration}}},
year = {{2010}},
}
@misc{2913,
author = {{Dercks, B. and Frahm, Björn and Grünewald, M. and Kenig, E. and Lautenschleger, A. and Gorak, A. and Schmidt, P. and Sudhoff, D. and Ressler, S. and Zecirovic, R.}},
location = {{Prague, Czech Republic}},
title = {{{Intensified absorption and distillation devices for modular chemical production processes}}},
year = {{2010}},
}
@inproceedings{2932,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
location = {{Karlsruhe}},
title = {{{Error analysis and improvement of first-order design sensitivity relations}}},
year = {{2010}},
}
@inproceedings{2946,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
location = {{Paris}},
title = {{{Improvement of first-order sensitivity relations based on an exact formulation for the change in the state due to design perturbations}}},
year = {{2010}},
}
@inproceedings{2947,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
location = {{Lisbon}},
title = {{{An exact representation of variational design sensitivity relations and improvement of classical frst-order formulations}}},
year = {{2010}},
}
@article{3108,
author = {{Austermann-Haun, Ute and Witte, Heike}},
journal = {{Neue Entwicklungen in der Anaerobtechnik – Verfahrens- und Leistungsvergleich}},
number = {{148}},
pages = {{39 -- 51}},
title = {{{Neue Entwicklungen in der Anaerobtechnik – Verfahrens- und Leistungsvergleich}}},
year = {{2010}},
}
@inproceedings{3146,
author = {{Austermann-Haun, Ute}},
location = {{Damaskus, Syrien}},
title = {{{Metal and Concrete Corrosion}}},
year = {{2010}},
}
@inproceedings{3147,
author = {{Austermann-Haun, Ute}},
location = {{Damaskus, Syrien}},
title = {{{Practice of wastewater treatment}}},
year = {{2010}},
}
@inproceedings{3148,
author = {{Austermann-Haun, Ute}},
location = {{Ho-Chi-Minh-Stadt, Vietnam}},
title = {{{Biological principles of the anaerobic treatment of high-strength wastewater}}},
year = {{2010}},
}
@inproceedings{3215,
author = {{Austermann-Haun, Ute}},
location = {{München}},
title = {{{Beton- und Metallkorrosion – Ursachen und Gegenmaßnahmen}}},
year = {{2010}},
}
@inproceedings{3217,
author = {{Austermann-Haun, Ute}},
location = {{Bochum}},
title = {{{„Wastewater lagoons“ und „Constructed Wetlands“}}},
year = {{2010}},
}
@inproceedings{3218,
author = {{Austermann-Haun, Ute}},
location = {{München}},
title = {{{Stand der Anaerobtechnologie in Deutschland und neue Entwicklungen}}},
year = {{2010}},
}
@inproceedings{3219,
author = {{Austermann-Haun, Ute}},
location = {{Lüneburg}},
title = {{{Korrosion in Kläranlagen}}},
year = {{2010}},
}
@inproceedings{3220,
author = {{Austermann-Haun, Ute}},
location = {{Siegen}},
title = {{{Perspektiven der Klärschlammverwertung in der Landwirtschaft}}},
year = {{2010}},
}
@inproceedings{3221,
author = {{Austermann-Haun, Ute}},
location = {{Hof}},
title = {{{Zuckerherstellung und Abwasserbehandlung}}},
year = {{2010}},
}
@inproceedings{3222,
author = {{Austermann-Haun, Ute}},
location = {{Hof}},
title = {{{Biologische Grundlagen des anaeroben Abbaus und Einflussfaktoren auf den Abbauprozess}}},
year = {{2010}},
}
@inproceedings{3223,
author = {{Austermann-Haun, Ute}},
location = {{Hof}},
title = {{{Anaerobe Industrieabwasserbehandlung – Neue Entwicklungen in der Anaerobtechnik: Verfahrens- und Leistungsvergleich}}},
year = {{2010}},
}
@inproceedings{3224,
author = {{Austermann-Haun, Ute}},
location = {{Hof}},
title = {{{Betriebsstörungen auf Kläranlagen}}},
year = {{2010}},
}
@inproceedings{3225,
author = {{Austermann-Haun, Ute}},
location = {{Hof}},
title = {{{Indirekteinleiter – Anforderungen an das Einleiten von Abwasser aus Industriebetrieben}}},
year = {{2010}},
}
@inproceedings{3226,
author = {{Austermann-Haun, Ute}},
location = {{Bleiwäsche, Kreis Paderborn}},
title = {{{Partizipation und Bürgergesellschaft am Beispiel von Lüdersen (Stadt Springe, Region Hannover): Erfolge und ungelöste Aufgaben. Ein Bericht aus dem kommunalpolitischen Alltag}}},
year = {{2010}},
}
@inproceedings{3227,
author = {{Austermann-Haun, Ute}},
location = {{Hodenhagen}},
title = {{{Neue Entwicklungen in der Anaerobtechnik – Verfahrens- und Leistungsvergleich}}},
year = {{2010}},
}
@inproceedings{3228,
author = {{Austermann-Haun, Ute}},
location = {{Hannover}},
title = {{{Neue Entwicklungen in der Anaerobtechnik – Verfahrens- und Leistungsvergleich}}},
year = {{2010}},
}
@article{3335,
author = {{Müller, Ulrich and Schulte, Helmut}},
issn = {{0047-4290 }},
journal = {{Lebensmitteltechnik}},
pages = {{30--31}},
publisher = {{LT Food-Medien-Verl.}},
title = {{{Flexibilität ist gefragt : Die industrielle Umsetzung des Sattdampfentkeimungsverfahrens}}},
year = {{2010}},
}
@article{3407,
author = {{Schneider, Jan and Steffens, Marco and Berlenkamp, Uwe and Schlimme, Karin}},
issn = {{0949-8877}},
journal = {{Brewing and Beverage Industry International}},
number = {{5}},
pages = {{84--89}},
publisher = {{Sachon}},
title = {{{Application of novel iron compounds in beverages }}},
year = {{2010}},
}
@article{3441,
author = {{Schneider, Jan and Steffens, Marco and Berlenkamp, Uwe and Schlimme, Karin}},
issn = {{0016-9323}},
journal = {{Gertränkeindustrie}},
number = {{7}},
pages = {{23--27}},
publisher = {{Sachon}},
title = {{{Innovative Eisenverbindungen Teil 2: Einflüsse auf Getränkeeigenschaften}}},
volume = {{64}},
year = {{2010}},
}
@article{3442,
author = {{Schneider, Jan and Steffens, Marco and Berlenkamp, Uwe and Schlimme, Karin}},
issn = {{0016-9323}},
journal = {{Gertränkeindustrie}},
number = {{6}},
pages = {{42--45}},
publisher = {{Sachon}},
title = {{{Innovative Eisenverbindungen Teil 1: Physiologische Aspekte und Stabilität in Getränken}}},
volume = {{64}},
year = {{2010}},
}
@inproceedings{3519,
abstract = {{Praktikum: Emulsionen}},
author = {{Kutz, Gerd}},
location = {{Detmold}},
title = {{{Rohstoffe und Formulierungsstrategien}}},
year = {{2010}},
}
@inproceedings{3543,
author = {{Kutz, G}},
location = {{Detmold}},
title = {{{Sterilfiltration}}},
year = {{2010}},
}
@book{3647,
author = {{Carstensen, Jan and Richartz, Claudia and Düllo, Thomas and Steinhardt, Angela and Tobey, Reinhold}},
editor = {{Carstensen, Jan and Richartz, Claudia}},
isbn = {{978-3-8375-0362-3}},
keywords = {{Erwachsener <18-35 Jahre>, Wohnkultur, Alltag, Bildband}},
pages = {{127}},
publisher = {{Klartext}},
title = {{{Wie junge Menschen 2000 und 2010 wohnen / Zimmerwelten Zwei. Hrsg. von Jan Carstensen und Claudia Richartz. [LWL Freilichtmuseum Detmold] }}},
volume = {{31}},
year = {{2010}},
}
@article{3828,
author = {{Riegel, Adrian and Schneider, Benedikt}},
issn = {{0018-3881}},
journal = {{Holztechnologie}},
number = {{1}},
pages = {{27 -- 33}},
publisher = {{Institut für Holztechnologie}},
title = {{{Verfahrensintegration Kehlen - Schleifen. Prozessauslegung über ein Prozessmodell}}},
volume = {{51}},
year = {{2010}},
}
@article{3830,
author = {{Riegel, Adrian and Solbrig, Konrad}},
issn = {{0018-3792}},
journal = {{Holz-Zentralblatt}},
number = {{21}},
pages = {{527 -- 528}},
publisher = {{Holz-Zentralblatt-Verl.}},
title = {{{Mit Maßtoleranzen systematisch umgehen : Teil 1: Warum Toleranzen nur bedingt akzeptiert und eingeführt sind - was kann die DIN 68101 in der Praxis leisten?}}},
volume = {{136}},
year = {{2010}},
}
@article{3832,
author = {{Riegel, Adrian}},
isbn = {{0018-3881}},
journal = {{Holztechnologie}},
number = {{4}},
pages = {{52}},
publisher = {{Institut für Holztechnologie}},
title = {{{Beurteilung von Holz- und Holzwerkstoffoberflächen. Richtlinien für die Güteüberwachung}}},
volume = {{51}},
year = {{2010}},
}
@article{3836,
author = {{Riegel, Adrian and Solbrig, Konrad}},
issn = {{0018-3792}},
journal = {{Holz-Zentralblatt}},
number = {{22}},
pages = {{546}},
publisher = {{Holz-Zentralblatt-Verl.}},
title = {{{Mit Maßtoleranzen systematisch umgehen : Teil 2: Toleranzrechnungsmethode aus der Automobilindustrie ist auch in der Holzindustrie einsetzbar.}}},
volume = {{136}},
year = {{2010}},
}
@inproceedings{5612,
author = {{Adamczyk, Heiko and Tino, Döhring and Heiss, Stefan}},
booktitle = {{Jahreskolloquium "Kommunikation in der Automation (KommA)}},
title = {{{Verfahren zur Identifikation und Analyse von IT Security Schwachstellen für Automatisierungsgeräte}}},
year = {{2010}},
}
@book{5756,
abstract = {{in Zusammenarbeit mit: Volker Maria Neumann, Klaus Overmeyer und Oliver Willing; Fotografien von Jens Bösenberg}},
editor = {{Häusler, Axel}},
isbn = {{978-3-86859-045-6}},
keywords = {{Wuppertal-Arrenberg, Sozioökonomischer Wandel, Stadtentwicklung}},
pages = {{112}},
publisher = {{Jovis}},
title = {{{Das war nicht Monaco hier}}},
year = {{2010}},
}
@article{5757,
author = {{Häusler, Axel}},
issn = {{2190-1597}},
journal = {{Urban Spacemag }},
publisher = {{Urban Spacemag}},
title = {{{Fehler sind notwendig}}},
volume = {{3}},
year = {{2010}},
}
@article{5789,
author = {{Breitner, M.H. and Guhr, Nadine and König, C.M. and Köpp, C. and Maske, P.}},
journal = {{HRM.de – Human Resource Management – das Netzwerk für Personaler}},
title = {{{Lernen in Bewegung – Mobiles Lernen setzt sich durch}}},
year = {{2010}},
}
@inbook{5805,
author = {{Breitner, M.H. and Guhr, Nadine and König, C. and Köpp, C. and Maske, P.}},
booktitle = {{Handbuch E-Learning – Das aktuelle Nachschlagewerk aus Wissenschaft und Praxis}},
editor = {{Hohenstein, Andreas and Wilbers , Karl }},
pages = {{1--24}},
publisher = {{Wolter Kluwers}},
title = {{{Microlearning mit UbiLearn®}}},
volume = {{33. Erg.-Lfg}},
year = {{2010}},
}
@inbook{5881,
author = {{Andreas, Torsten and Minge, Michael and Niebuhr-Siebert, Sandra}},
booktitle = {{Sprache macht Spaß. SPAS macht Sprache. Sprache als Handlungskompetenz fördern - eine Herausforderung für die berufliche Bildung}},
pages = {{54--64}},
publisher = {{GFBM}},
title = {{{Texteasy: Entwicklung. In Gesellschaft für berufsbildende Maßnahmen}}},
year = {{2010}},
}
@book{5918,
abstract = {{Die Bedeutung der Logistik für die Möbleindustrie wird oftmals unterschätzt.Dies ist umso erstaunlicher, da die Branche von einer geringen Umsatzrendite geprägt ist. Viele Unternehmen versuchen, Kosten durch Produktionsverlagerung oder eine höhere Automatisierung zu reduzieren. Potentiale zur Senkung der Kosten durch eine optimierte Logistik werden hingengen kaum angegangen.}},
author = {{Boone, Nicholas}},
isbn = {{978-3-941645-03-5}},
pages = {{29}},
publisher = {{HS-OWL}},
title = {{{Möbellogistik - Empirische Untersuchung zur Einschätzung von Potenzialen für Prozessverbesserungen}}},
volume = {{3}},
year = {{2010}},
}
@article{5919,
abstract = {{Die Logistik wird in der Möbelindustrie oftmals nicht ernst genommen. Dies ist umso erstaunlicher, da die Branche von einer geringen Umsatzrendite geprägt ist. Vie.le Unternehmen versuchen die Kosten zum Beispiel durch Produktionsverlagerungen zu reduzieren. Die Potenziale zur Kostensenkung in der Logistik werden hingegen kaum angegangen.}},
author = {{Boone, Nicholas}},
issn = {{0947-6237}},
journal = {{HK : Fachzeitschrift für die Holz- und Möbelindustrie ; Internationale Fachzeitschrift für Unternehmer und Führungskräfte der Holz- und Möbelindustrie}},
number = {{4}},
pages = {{94 -- 97}},
publisher = {{DRW-Verl. Weinbrenner}},
title = {{{Verschenkte Potenziale}}},
volume = {{43}},
year = {{2010}},
}
@article{5922,
abstract = {{In der Möbelbranche nimmt die Logistik einen geringen Stellenwert ein. Durch eine integrierte Prozessabwicklung mit einer durchgängigen IT, insbesondere durch eine Standardisierung, können Logistikpotentiale ausgeschöpft werden. Das größte Potential wird im Bereich Vertriebssteuerung und verbesserter Absatzprognose gesehen. Für die Zukunft wird erwartet, dass der Handel die Steuerung der Supply Chain übernimmt und die Abhollogistik selbst übernimmt.}},
author = {{D. Boone, Nicholas}},
issn = {{0018-3881 }},
journal = {{Holztechnologie}},
number = {{2}},
pages = {{38 -- 43}},
publisher = {{Inst. für Holztechnologie}},
title = {{{Möbellogistik - ein Schlüssel zum Unternehmenserfolg? Warum sich viele Unternehmen trotz niedriger Renditen nicht damit befassen}}},
volume = {{51}},
year = {{2010}},
}
@book{5924,
abstract = {{This paper analyses post-carriage tours of a groupage depot. The depot serves as the starting point for tours in a ring-radial transport network. Typically, tours are constrained by restrictions with regard to driving and work time per driver and with regard to the vehicle/trailer capacity. These tours can be modeled as a so-called Capacitated Vehicle Routing Problem (CVRP).}},
author = {{Boone, Nicholas and Quisbrock, Tim}},
isbn = {{978-3-941645-06-6}},
pages = {{32}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Why Size Does Matter - Estimating the Length of Tours in ring-radial Transport Networks}}},
volume = {{6}},
year = {{2010}},
}
@inbook{5934,
abstract = {{Die derzeitigen Auswirkungen der weltweiten Wirtschaftskrise auf den Automobilsektor legen nahe, dass die Bedeutung eines effizienten After-Sales-Geschäfts für Automobilzulieferer weiter zunehmen wird. Bei der Warendistribution im sogenannten Tndependent After Market (TAM) müssen die Zulieferer logistische Hochlcistungsanforderungen erfüllen. Hier bietet sich der Einsatz dynamischer Kommissioniersysteme an. Infolge der geforderten kurzen Lieferzeiten entsteht fur die Auftragssteuenmg ein Online-Problem, fur das derzeit keine geeigneten generischen Algorithmen existieren. In diesem Paper wird ein leistungsfähiger und t1exibler Steuerungsalgorithmus fur eine Kommissionierung mit dynamischer Bereitstellung entwickelt, der die genannten Hochleistungsanforderungen erfuHt. Auf der Basis einer Online-Aktualisierung der Auftragsdaten werden jeweils günstige Steuerungsvorgaben ermittelt. Die Performance des entworfenen Steuerungsalgorithmus wird durch eine Simulation des Kommissioniersystems unter dynamischer Auftragslast mit Realdaten untersucht. Umfangreiche Simulationsexperimente belegen die Funktionsfähigkeit des konzipierten Online-Algorithmus fur die After-Sales-Distribution im IAM. Die erzielten Ergebnisse der Arbeit sind zudem auf Märkte mit ähnlichen Hochleistungsanforderungen übertragbar (z.B. Pharmaoder BuchgroßhandeI).}},
author = {{Boone, Nicholas and Quisbrock, Tim}},
booktitle = {{Nachhaltigkeit in flexiblen Produktions- und Liefernetzwerken}},
isbn = {{978-3-86582-852-1}},
pages = {{323--340}},
publisher = {{Verl.-Haus Monsenstein und Vannerdat }},
title = {{{Online-Algorithmus für die Steuerung einer Kommissionierung mit dynamischer Bereitstellung für die After-Sales-Distribution in der Automobilzulieferindustrie}}},
year = {{2010}},
}
@inproceedings{6143,
author = {{Schneider, P. and Bischoff, F. and Müller, Ulrich and Bart, H.-J. and Schlitter, K. and Jordan, V.}},
location = {{Karlsruhe}},
title = {{{Die Phytoextraktion mit Tensid-Wasser-Systemen am Beispiel der Triterpengewinnung aus Salbei}}},
year = {{2010}},
}
@inproceedings{6144,
author = {{Dammann_, Anna and Schwarzer, Knut and Lange, H. and Krüger, H. and Müller, Ulrich}},
location = {{Bonn}},
title = {{{Mechanische Sattdampfentkeimung – Alternative zu gängigen Entkeimungsverfahren}}},
year = {{2010}},
}
@inproceedings{6145,
author = {{Lange, H. and Dammann_, Anna and Schwarzer, Knut and Krüger, H. and Müller, Ulrich}},
location = {{Bonn}},
title = {{{Beeinflussung des Mikroorganismengehalts und der wertgebenden Inhaltsstoffe durch die Mechanische Sattdampfentkeimung}}},
year = {{2010}},
}
@inproceedings{6146,
author = {{Schwarzer, Knut and Lange, H. and Dammann_, Anna and Krüger, H. and Müller, Ulrich}},
location = {{Bonn}},
title = {{{Medizinaldrogen, Kräuter und mehr - Mögliche Einsatzgebiete der Mechanischen Sattdampfentkeimung}}},
year = {{2010}},
}
@inproceedings{6147,
author = {{Müller, Ulrich}},
location = {{Nuthetal}},
title = {{{Stand der Sattdampfentkeimung bei pflanzlichen Materialien}}},
year = {{2010}},
}
@inproceedings{6148,
author = {{Lange, H. and Schwarzer, Knut and Dammann_, Anna and H., Krüger and Müller, Ulrich}},
location = {{Stuttgart-Hohenheim}},
title = {{{Mechanische Sattdampfentkeimung von Arznei- und Gewürzpflanzen}}},
year = {{2010}},
}
@inproceedings{6149,
author = {{Lange, H. and Krüger, H. and Dammann_, Anna and Schwarzer, Knut and Müller, Ulrich}},
location = {{Aachen}},
title = {{{Wirkstoffgehalte von Medizinaldrogen nach mechanischen Sattdampfentkeimungen}}},
year = {{2010}},
}
@inproceedings{6150,
author = {{Müller, Ulrich}},
location = {{Fulda}},
title = {{{Emulsionsherstellung im industriellen Maßstab mittels Gegenstrominjektion}}},
year = {{2010}},
}
@inproceedings{6161,
author = {{Schwarzer, Knut and Wilhelm, Patrick and Krüger, H. and Lange, H. and Müller, Ulrich}},
location = {{Lemgo}},
title = {{{Die 'Lemgo D- and z-value Database for Food' (LDzBase) - ein Werkzeug zur genaueren Parametrierung von Entkeimungen in der Lebensmittelindustrie}}},
year = {{2010}},
}
@inproceedings{6166,
author = {{Dammann_, Anna and Schwarzer, Knut and Krüger, H. and Lange, H. and Müller, Ulrich}},
location = {{Lemgo}},
title = {{{Die mechanische Sattdampfentkeimung von Pflanzenmaterialien- und neuste Ergebnisse}}},
year = {{2010}},
}
@inproceedings{6167,
author = {{Müller, Ulrich}},
location = {{Lemgo}},
title = {{{Entkeimung von festen pflanzlichen und flüssigen Substanzen – ein Überblick}}},
year = {{2010}},
}
@inproceedings{617,
abstract = {{The production of high quality, customer-oriented but equally competitive products should encourage the manufacturers of construction materials to ensure that the non value-adding activities are continuously reduced within production. Against
this background, an approach was developed, based on a combination of static value stream mapping and dynamic simulation. By means of a pilot study from a company of the construction materials industry, the developed approach is presented.}},
author = {{Börkircher, Mikko and Gamber, Thilo Gerhard}},
booktitle = {{Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010.}},
editor = {{Zülch, G.}},
isbn = {{978-3-86644-558-1}},
keywords = {{Simulation, Automobilindustrie, Digitale Fabrik, Logistiksysteme, Bauindustrie}},
location = {{Karlsruhe}},
number = {{1}},
pages = {{405--412}},
publisher = {{KIT}},
title = {{{Simulationsunterstütztes Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie}}},
doi = {{ DOI: 10.5445/KSP/1000019635 }},
year = {{2010}},
}
@inproceedings{618,
author = {{Gamber, Thilo Gerhard and Börkircher, Mikko and Zülch, Gert}},
booktitle = {{Neue Arbeits- und Lebenswelten gestalten : vom 24. - 26. März 2010 }},
editor = {{Schütte, Martin }},
isbn = {{978-3-936804-08-9}},
location = {{Darmstadt}},
pages = {{409--412}},
publisher = {{GfA-Press }},
title = {{{Vereinbarkeit von Berufs- und Privatleben im Krankenhausbereich durch Gestaltung sozialverträglicher Arbeitszeiten}}},
year = {{2010}},
}
@inproceedings{620,
author = {{Gamber, Thilo Gerhard and Zülch, Gert}},
booktitle = {{Integrationsaspekte der Simulation: Technik, Organisation und Personal}},
editor = {{Zülch, Gert and Patricia, Stock}},
isbn = {{978-3-86644-558-1}},
location = {{Karsruhe}},
number = {{1}},
pages = {{373--380}},
publisher = {{KIT}},
title = {{{Agentenbasierte Planung und Simulation der Arbeitszeitgestaltung in Krankenhäusern}}},
year = {{2010}},
}
@inbook{621,
author = {{Gamber, Thilo Gerhard and Börkircher, Mikka}},
booktitle = {{Mittelpunkt Mensch.}},
pages = {{227--247}},
publisher = {{VS Verlag für Sozialwissenschaften / GWV Fachverlage GmbH}},
title = {{{Vereinbarkeit von Familien- und Berufsleben bei der Gestaltung flexibler Arbeitszeiten}}},
year = {{2010}},
}
@article{6231,
author = {{Müller, Ulrich and Schulte, H.}},
journal = {{Lebensmitteltechnik}},
number = {{1-2}},
pages = {{30--31}},
title = {{{Flexibilität ist gefragt – die industrielle Umsetzung des Sattdampfentkeimungsverfahrens}}},
year = {{2010}},
}
@article{6233,
author = {{Schwarzer, Knut and Schneider, J. and Müller, Ulrich and Becker, Barbara and Wilhelm, P.}},
journal = {{Brauwelt Internatinal V}},
pages = {{252--256}},
title = {{{Lemgo Database for D- and z-values: useful for beverage spoilage micro organism}}},
year = {{2010}},
}
@article{6234,
author = {{Müller, Ulrich and Schwarzer, Knut and Wilhelm, P. and Dammann_, Anna and Schneider, J.}},
journal = {{Lebensmitteltechnik}},
title = {{{Lemgoer Datenbank für D- und z-Werte}}},
volume = {{4}},
year = {{2010}},
}
@inproceedings{6279,
author = {{Song, Jian and Koch, C. and Sawitzki, F.}},
booktitle = {{Proceedings of 17th International Colloquium Tribology}},
title = {{{Wear Patterns of Electric Contacts}}},
year = {{2010}},
}
@inproceedings{6280,
author = {{Zhai, P. and Song, Jian}},
booktitle = {{Proceedings of Actuators 2010}},
title = {{{A Comparison of Piezoelectric and Giant Magnetostrictive Actuators in Precision Machine Tools}}},
year = {{2010}},
}
@inproceedings{6281,
author = {{Song, Jian and Koch, C. and Wang, L.}},
booktitle = {{Proceedings of 6. ARNOLD TROSS KOLLOQUIUM}},
location = {{Hamburg}},
title = {{{Tribological Behavior of Electric Contacts}}},
year = {{2010}},
}
@inproceedings{6282,
author = {{Song, Jian and Koch, C. and Wang, L. and Stopic, S. and Bogovic, J. and Möbius, A. and Fuhrmann, Andreas}},
booktitle = {{Proceedings of NANOSMAT-5}},
title = {{{Nanoscale Particles Modified Gold Plating}}},
year = {{2010}},
}
@inproceedings{6283,
author = {{Fuhrmann, Andreas and Song, Jian and Stopic, S. and Möbius, A.}},
booktitle = {{Proceedings of Symposium Galvanik}},
title = {{{Elektromechanische Komponenten mit neuen nanopartikelmodifizierten Edelmetalloberflächen}}},
year = {{2010}},
}
@misc{10078,
author = {{Kluge, Thomas and Felmeden, Jörg and Michel, Bernhard and Rüthrich, Wulf}},
publisher = {{Institut für sozial-ökologische Forschung gGmbH}},
title = {{{Analyse und Bewertung der teilräumlichen Entwicklung und Strukturierung teilräumlicher Lösungsansätze für das Gebiet der Trinkwasserversorgung Magdeburg GmbH – Strukturkonzept TWM 2050}}},
year = {{2010}},
}
@misc{10085,
abstract = {{Die bisherigen energierelevanten Maßnahmen in der öffentlichen Wasserversorgung und der kommunalen Abwasserentsorgung sind vorwiegend betriebswirtschaftlich begründet. In Zukunft werden die Maßnahmen zur Mobilisierung von Energiepotenzialen wie zum Beispiel die Nutzung von Abwärme aus dem Abwasser oder durch den Einsatz anaerober Verfahren der Abwasserbehandlung aus umweltökonomischen Gründen in den Vordergrund treten. Der mit der vorliegenden Untersuchung erbrachte Nachweis der wirtschaftlichen Tragfähigkeit eines grundlegenden Umbaus der kommunalen Wasser-Infrastruktur kann nur als ein erster Schritt hin zur Umsetzung verstanden werden. Es besteht weiterer Klärungsbedarf in Hinblick auf die spezifischen Anforderungen und Voraussetzungen eines solchen strukturellen Umbaus. Dies betrifft nicht zuletzt die Schnittstellen zur Stadtentwicklung sowie zu anderen Ver- und Entsorgungssektoren.
}},
author = {{Felmeden, Jörg and Kluge, Thomas and Koziol, Matthias and Libbe, Jens and Michel, Bernhard and Scheele, Ulrich}},
keywords = {{Finanzierung, Kanalisation, Umweltschutz}},
pages = {{98}},
publisher = {{Deutsches Institut für Urbanistik GmbH}},
title = {{{Öko-Effizienz kommunaler Wasser-Infrastrukturen : Bilanzierung und Bewertung bestehender und alternativer Systeme}}},
volume = {{26}},
year = {{2010}},
}
@misc{10157,
author = {{Neufeld, Paul and Meier, Uwe and Helmig, Kai and Witte, Stefan}},
booktitle = {{Elektronik : Organ der GMM}},
issn = {{0013-5658 }},
number = {{7}},
pages = {{36--41}},
publisher = {{WEKA Fachmedien GmbH }},
title = {{{Die Vermessung industrieller Funksysteme - Echtzeitfähige Kanalemulatoren schaffen reproduzierbare Testumgebungen}}},
year = {{2010}},
}
@misc{10158,
abstract = {{Die einwöchige Summer Academy findet einmal pro Jahr in einer Tagungsstätte außerhalb der Hochschule statt. In dieser Umgebung bearbeiten Studierende der Studiengänge Elektrotechnik, Informationstechnik und Mechatronik zusammen mit Lehrenden ein aktuelles technisch/wissenschaftliches Thema in Kleingruppen und präsentieren die Ergebnisse am Ende der Woche. Die gesamte Gruppe bleibt zusammen und übernachtet am Ort der Veranstaltung. Ein spezielles Rahmenprogramm ergänzt diese Veranstaltung. In diesem Beitrag wird über die Erfahrungen der ersten Jahre berichtet, es werden Themenfelder und das verfolgte Konzept vorgestellt. }},
author = {{Witte, Stefan and Niggemann, Eberhard and Schmidt, Hans-Peter and Zimmermann, Bernhard}},
booktitle = {{agungsband - AALE 2010 : 7. Fachkolloquium für Angewandte Automatisierungstechnik in Lehre und Entwicklung an Fachhochschulen : Wien, 11./12. Februar 2010, Fachhochschule Technikum Wien }},
editor = {{Malisa, Viktorio}},
isbn = {{ 978-3-902759-00-9 }},
keywords = {{Summer Academy, Projektarbeiten, Lehre}},
location = {{Wien}},
pages = {{213--216}},
publisher = {{F-AR, Verein zur Förderung der Automation u. Robotik}},
title = {{{Summer Academy - Fördern und Fordern außerhalb der Hochschule}}},
year = {{2010}},
}
@misc{10159,
author = {{Seibold, Christopher and Söllner, Matthias and Schmidt, Rüdiger and Michels, Jan-Stefan and Wesemann, Derk and Witte, Stefan and Schmidt, Hans-Peter}},
location = {{Szczecin, Poland}},
title = {{{Measurement and Design Optimization for Contact less Power Supplies in industrial automation}}},
year = {{2010}},
}
@misc{10189,
abstract = {{In diesem Dokument wird die fachliche und didaktische Vorbereitung des Themas „Automa‐tion und Ethernet ‐ Programmieren einer Bedienen‐Beobachten‐Anwendung auf Basis von Raw‐Ethernet und UDP“ vorgestellt. Die Elemente und die Funktionsweise des Demomodells einer Indust‐rieanlage werden präsentiert. Die Anwendung des Konzepts in der Praxis bei der Weidmüller Summer Academy 2009 und die erzielten Ergebnisse der Studenten werden diskutiert. Der Prototyp einer Er‐weiterung für das Feldbussystem PROFINET wird vorgestellt. }},
author = {{Söllner, Matthias and Niggemann, Eberhard and Witte, Stefan and Zimmermann, Bernhard and Schmidt , Hans-Peter Schmidt }},
booktitle = {{AALE 2010 TAGUNGSBAND 7. Fachkolloquium für Angewandte Automatisierungstechnik in Lehre und Entwicklung an Fachhochschulen Wien, 11./12. Februar 2010 Fachhochschule Technikum Wien}},
editor = {{Malisa, Viktorio }},
isbn = {{978‐3‐902759‐00‐9}},
keywords = {{Automation, Raw‐Ethernet, ARM, Realtime Linux, PROFINET, Lehre}},
location = {{Wien}},
pages = {{193--196}},
publisher = {{F-AR, Verein zur Förderung der Automation u. Robotik}},
title = {{{Demonstrationsmodell „Automation und Ethernet“}}},
year = {{2010}},
}
@misc{4930,
author = {{Vetter, Andreas}},
publisher = {{Landesvertretung von Nordrhein-Westfalen}},
title = {{{Netzwerk - Systemisches Denken als gesellschaftliches Potential}}},
year = {{2010}},
}
@misc{4936,
author = {{Vetter, Andreas}},
publisher = {{Lippisches Landesmuseum}},
title = {{{Dauerausstellung der Designsammlung}}},
year = {{2010}},
}
@inbook{5031,
author = {{Ramke, Hans-Günter and Blöhse, D. and Lehmann, Hans-Joachim and Fettig, Joachim}},
booktitle = {{Tagungsband, 22. Kasseler Abfall- und Bioenergieforum}},
location = {{Witzenhausen}},
pages = {{141--157}},
title = {{{Hydrothermale Carbonisierung organischer Siedlungsabfälle}}},
year = {{2010}},
}
@inbook{5032,
author = {{Wehnert, J. and Schulte-Ebbert, U. and Schlett, C. and Willme, U. and Zullei-Seibert, N. and Fettig, Joachim}},
booktitle = {{Tagungsband, Jahrestagung der Wasserchemischen Gesellschaft}},
location = {{Bayreuth}},
pages = {{258--262}},
title = {{{Orientierende Untersuchungen zum Rückhalt von EDTA, Carbamazepin und Amidotrizoesäure an verschiedenen Austauscher-/Adsorbermaterialien}}},
year = {{2010}},
}
@article{5033,
author = {{Fettig, Joachim}},
journal = {{Int. Rev. Appl. Sci. Eng.}},
number = {{1-2}},
pages = {{51--54}},
title = {{{Drinking Water Quality and Protection of Resources}}},
volume = {{1}},
year = {{2010}},
}
@inproceedings{5034,
author = {{Lorenz, M. and Le, T.T.H. and Pick, Volker and Meon, G. and Fettig, Joachim}},
location = {{Kiel}},
title = {{{Simulation of non-point pollution and reduction of water pollution in Tay Ninh catchment in Vietnam}}},
year = {{2010}},
}
@inproceedings{5137,
author = {{Pottgiesser, Uta and Hemmerling, Marco}},
booktitle = {{10th International Conference on Design & Decision Support Systems in Architecture and Urban Planning: July 19-22, 2010, Eindhoven, The Netherlands / Timmermans, Harry [edit.]}},
isbn = {{978-90-6814-181-8}},
location = {{Eindhoven, Niederlande}},
title = {{{Design decision matrix}}},
year = {{2010}},
}
@article{5139,
author = {{Pottgiesser, Uta and Knaack, Ulrich and Strauß, Holger}},
journal = {{Die Bautechnik}},
publisher = {{Ernst & Sohn Special}},
title = {{{Innovationen für Fassaden : Lehre und Forschung}}},
year = {{2010}},
}
@inbook{5140,
author = {{Pottgiesser, Uta and Kirch, Julia}},
booktitle = {{Old and new. Design manual for revitalizing existing buildings}},
editor = {{Jäger, Frank-Peter}},
isbn = {{9783034605250}},
pages = {{118--129}},
publisher = {{Birkhäuser-Verlag}},
title = {{{Renovating modern movement facades}}},
year = {{2010}},
}
@inproceedings{5142,
author = {{Pottgiesser, Uta and Hemmerling, Marco}},
location = {{Eindhoven, Niederlande}},
title = {{{Spatial perception in real and virtual environments methodology and case studies}}},
year = {{2010}},
}
@inbook{5144,
author = {{Pottgiesser, Uta and Kirch, Julia}},
booktitle = {{Alt-Neu : Entwurfshandbuch Bauen im Bestand }},
editor = {{Jäger, Frank-Peter}},
isbn = {{9783034605236}},
publisher = {{Birkhäuser-Verlag}},
title = {{{Temperierte Transparanz : Fassaden der Moderne, denkmalgerecht erneuert}}},
year = {{2010}},
}
@inproceedings{5145,
author = {{Pottgiesser, Uta and Kirch, Julia}},
location = {{Tokyo, Japan}},
title = {{{Typology of steel profiles in modern facade constructions : examples from Germany}}},
year = {{2010}},
}
@inbook{5339,
abstract = {{Viren verfügen über RNA oder DNA. Eine wirtsunabhängige Vermehrung ist somit nicht möglich. Zur Vermehrung benötigen Viren physiologisch intakte Wirtszellen, da sie im Rahmen ihrer Vermehrung auf deren Proteinsynthesemechanismen und die energieliefernden Stoffwechselprozesse zugreifen. Nach Infektion der Wirtszelle modifizieren sie die zellulären Prozesse in Hinblick auf einen optimalen Ablauf ihrer Replikation. Viren sind intrazelluläre Parasiten. Eine Virusvermehrung im Lebensmittel ist nicht möglich. Einige Viren können jedoch in Lebensmitteln überdauern und durch Lebensmittel übertragen werden. Zahlreiche Berichte belegen, dass viruskontaminierte Lebensmittel zu Krankheitsausbrüchen führten. Daraus ergeben sich Anforderungen an die Lebensmitteltechnologie, Lebensmittelhygiene und -untersuchung.}},
author = {{Becker, Barbara}},
booktitle = {{Molekularbiologische Methoden in der Lebensmittelanalytik}},
editor = {{Busch, Ulrich}},
isbn = {{978-3-642-10715-3}},
pages = {{107--120}},
publisher = {{Springer Verlag}},
title = {{{Molekularbiologische Methoden zum Nachweis lebensmittelübertragbarer Viren}}},
doi = {{10.1007/978-3-642-10716-0_8}},
year = {{2010}},
}
@misc{9753,
author = {{Stemmer, Boris and Koch, Sandra}},
booktitle = {{UVP-Report : Informationen zu Umweltverträglichkeitsprüfung, Umweltmanagement und nachhaltiger Entwicklung }},
issn = {{0933-0690}},
number = {{5}},
pages = {{231–232}},
publisher = {{UVP-Gesellschaft e.V.}},
title = {{{UVP in Lehre und Forschung an der Universität Kassel}}},
volume = {{24}},
year = {{2010}},
}
@misc{1249,
author = {{Kowalski, Maciej}},
pages = {{70}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Es ist nicht alles GOD was glänzt}}},
year = {{2010}},
}
@misc{1251,
author = {{Spindler, Mark}},
pages = {{42}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Zurück um 2}}},
year = {{2010}},
}
@misc{1253,
author = {{George, Bijoy Kkonnamkot}},
pages = {{57}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Experimenting with a tilt-shift lens in a short film production}}},
year = {{2010}},
}
@misc{1255,
abstract = {{Through the making of a short film, entitled The First Job, this thesis attempts to investigate the issue of death and dying in the context of other films and writings. The way in which Western society has portrayed Death as a character and death as a fact is a reflection of how this issue is understood. If film narratives have changed their approach to the Grim Reaper, does it have any barring on this usually unmentionable taboo? Filmmakers such as Ingmar Bergman and authors such as Susan Sontag have taken the questions some steps further. It is the intention of this paper to try, through reflective practice, to follow these steps.}},
author = {{Schelin, Dagoberto}},
pages = {{72}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Reflections on Death as Character, Event and Medium in Film and in Life : A Practice-Based Research on Making a Short Film}}},
year = {{2010}},
}
@misc{1257,
abstract = {{The change of technologies and digital improvement in the film industry has made it possible to apply new media content to film. Digital cinema is providing the audience with a new dimension of film experience. By adding the feature to screen movies in stereoscopic1 mode, the audience is taken into the scenery itself. Nowadays stereoscopic films are a standard at cinemas, but there is a significant change for the filmmaking industry. Stereoscopic films have to be produced also in a stereoscopic way, which affects and restricts the common work of filmmaking people. This work provides the reader with fundamental knowledge about stereoscopy. This work points out the additional workload if a common production will be produced in the stereoscopic way. Thus the reader is able to estimate the extra workload for a stereoscopic production and knows where the daily work will be restricted.
1 Stereoscopic designates the spatial visual cognition of the world surrounding the viewer.}},
author = {{Pieniak, Jan}},
pages = {{69}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Additional workload evaluation of a stereoscopic film production, based on a case study comparison of a classical monoscopic commercial production}}},
year = {{2010}},
}
@misc{1259,
author = {{Störmer, Katharina}},
pages = {{87}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{"Konzeption und Realisierung einer Online-Community mit Hilfe von PHP und MySQL"}}},
year = {{2010}},
}
@misc{1261,
author = {{Liu, Caro}},
pages = {{34}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Carmen & Figaro}}},
year = {{2010}},
}
@misc{1263,
author = {{Schröder, Marco}},
pages = {{148}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption, Gestaltung und Realisation eines Corporate Design für die Firma "soulmate clothing co."}}},
year = {{2010}},
}
@misc{1265,
author = {{Leonkin, Marina}},
pages = {{35}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Designanalyse und Neukonzeption von Erscheinungsbilder von Zahnarztpraxen}}},
year = {{2010}},
}
@misc{1267,
author = {{Lehmann, Heiko}},
pages = {{24}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Produktion einer Audio-CD}}},
year = {{2010}},
}
@misc{1269,
author = {{Atkins, Colin}},
keywords = {{MySQL, Rails, Ruby, XHTML, jQuery}},
pages = {{48}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption und Umsetzung eines Bookmarkingportals auf Basis von Ruby on Rails, MySQL, XHTML/CSS und jQuery}}},
year = {{2010}},
}
@misc{1273,
author = {{Weichert, Philipp}},
pages = {{50}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Making Of: Einstürzende Mauern : Produktionsleitung eines Kurzfilms}}},
year = {{2010}},
}
@misc{1275,
author = {{Stratmann, Dirk}},
pages = {{95}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Making Of: Einstürzende Mauern : Regie eines Kurzfilms}}},
year = {{2010}},
}
@misc{1277,
author = {{Knoop, Christian}},
pages = {{123}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{threeleaf : biologisches Teegetränk}}},
year = {{2010}},
}
@misc{1279,
author = {{Kleß, Sarah}},
pages = {{139}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption, Gestaltung, Realisation eines Corporate Design für das Handelsunternehmen AKD aus Bielefeld}}},
year = {{2010}},
}
@misc{1282,
author = {{Niemeier, Kai}},
pages = {{79}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{likefy : Konzeption, Gestaltung und Programmierung eines sozialen Online-Netzwerks auf Basis von PHP, mySQL und AJAX}}},
year = {{2010}},
}
@misc{1284,
author = {{Krüger, Urs}},
pages = {{38}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Making of: Einstürzende Mauern : Audioaufnahme, -schnitt und -mischung zu einem Kurzfilm}}},
year = {{2010}},
}
@misc{1285,
author = {{Ali, Wildan}},
pages = {{33}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Proposal for an Internationally-aimed Feature Film Co-production Between Indonesia and Germany}}},
year = {{2010}},
}
@misc{1287,
author = {{Aguilar Menzel, Marco}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Purpose of WAR}}},
year = {{2010}},
}
@misc{1288,
author = {{Hartmann, Simon}},
pages = {{51}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Purpose of WAR}}},
year = {{2010}},
}
@misc{1290,
author = {{Lappe, Matthias}},
pages = {{81}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Alive - Ein 3D Kurzfilm mit den Schwerpunkten Charakteranimation und Szenerieerstellung}}},
year = {{2010}},
}
@misc{1292,
author = {{Lenhard, Maike and Rose, Anna-Lena}},
pages = {{107}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Memento : Traum, Alptraum, Traumata - Aspekte visueller Darstellungen}}},
year = {{2010}},
}
@misc{1294,
author = {{Lindemann, Sabrina}},
pages = {{80}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption, Gestaltung und Realisation eines Redesign für die Musik & Kunstschule der Stadt Osnabrück}}},
year = {{2010}},
}
@misc{1296,
abstract = {{Diese Bachelorarbeit handelt von Corporate Identity und Corporate Design. Es werden die Geschichte, die Definition, die Struktur und die Ziele, die Wirkung und die Probleme behandelt. Im darauf folgenden Teil wird ein Corporate Design für die gEbäudereinigungsfirma Erich Niediek GmbH & Co. KG erstellt.}},
author = {{Machaczek, Daniel}},
keywords = {{Corporate Identity, Corporate Design, Styleguide}},
pages = {{47}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption und Gestaltung eines Corporate Design für die Firma Erich Niediek GmbH & Co. KG}}},
year = {{2010}},
}
@misc{1298,
author = {{Reimer, Alla}},
pages = {{53}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Darstellung von großen Zahlen}}},
year = {{2010}},
}
@misc{1299,
abstract = {{The aim of the project is to combine the knowledge of audio, video, interaction design and performing art into a media based content. A media worker without previous knowledge of electronics tends to achieve the task to work out the communication between media and interactive device. By means of an interactive installation, the technical and aesthetical opportunities are explored to find new ways to present the performance of musicians as well.}},
author = {{Hsieh, Mong-Gan}},
keywords = {{Visual Music, Mapping Projection, Interaction Design, Digital Performance, Audiovisual, Arduino, Pure Data}},
pages = {{53}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Interactive Audiovisual Performance : Realtime Interaction with Improvising Music and Mapping Projection}}},
year = {{2010}},
}
@misc{1301,
author = {{Gockel, Juliane}},
pages = {{62}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Corporate Identity für Garten- und Landschaftsbau - Analyse, Konzeption, Gestaltung und Realisation von visuellen Erscheinungsbildern }}},
year = {{2010}},
}
@misc{1303,
author = {{Oßenbrügge, Julia}},
pages = {{119 / 60}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Touristische Leit- und Orientierungssysteme als Marketingstrategie der Stadt Cuxhaven : Eine Analyse}}},
year = {{2010}},
}
@misc{1306,
author = {{Siebrecht, Sebastian}},
pages = {{38}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption, Gestaltung und Realisation einer CI inklusive eines Webauftrittes für die Diskothek "Halle Luja"}}},
year = {{2010}},
}
@misc{1308,
author = {{Mompour, Marcel and Schwarz, Sarah}},
pages = {{59}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Zielsicher}}},
year = {{2010}},
}
@misc{1310,
author = {{Borzyszkowski, Thomas}},
pages = {{101 / 74}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Klar - Magazin für Sport, Kultur und Unterhaltung}}},
year = {{2010}},
}
@misc{1313,
author = {{Franco Cunha, Frederico}},
pages = {{30}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Demoreel 2010}}},
year = {{2010}},
}
@misc{1315,
author = {{Pella, Christoph}},
pages = {{24}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Das außergewöhnliche Restaurant "Shuttle"}}},
year = {{2010}},
}
@misc{1320,
author = {{Kösters, Jens and Seidel, Christoph}},
pages = {{66}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Bahrain : land of contrasts}}},
year = {{2010}},
}
@misc{1322,
author = {{Hecht, Jessica}},
pages = {{57 / 53}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Relaunch - Audiostone Distribution Internetpräsenz}}},
year = {{2010}},
}
@misc{1325,
author = {{Roth, Alexander}},
pages = {{171}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Raketa Rundschrift : Konzeption und Umsetzung einer digitalen Schriftart.}}},
year = {{2010}},
}
@misc{1327,
author = {{Spyra, Toni}},
pages = {{79}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Corporate Design des Unternehmens "TEES"}}},
year = {{2010}},
}
@misc{1330,
author = {{Weckwerth, Roman}},
pages = {{41}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Marks Motiv}}},
year = {{2010}},
}
@misc{1332,
author = {{Königsbrügge, Svenja}},
pages = {{155}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Phenomenon of Group Dynamic Processes in Documentaries}}},
year = {{2010}},
}
@misc{1333,
author = {{Kopka, Jonathan}},
pages = {{22}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Personaliesierte Medizin}}},
year = {{2010}},
}
@misc{1341,
author = {{Jegelka, Carolin}},
pages = {{31 / 63}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Die Feder von Ginnungap : Concept Art, Charakter Design & Animation Guide}}},
year = {{2010}},
}
@misc{1344,
author = {{Busse, Thomas and Grosse, Florian and Fuest, Matthias}},
pages = {{37 / 49 / 49 / 103}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Erstellen eines Point & Click Adventures}}},
year = {{2010}},
}
@article{6551,
author = {{Lohr, Mathias}},
issn = {{1437-5621 }},
journal = {{Libellennachrichten}},
pages = {{14--15}},
title = {{{Riesen-Urzeitlibelle Meganeura monyi als Touristen-Attraktion und Symbol regionaler Identität}}},
volume = {{22}},
year = {{2009}},
}
@article{6760,
author = {{von Blanckenburg, Korbinian and Geist, Alexander}},
issn = {{1573-966X}},
journal = {{International Advances in Economic Research}},
keywords = {{Competition policy, Workability of markets, Industry studies}},
number = {{9}},
pages = {{421--436}},
publisher = {{Springer}},
title = {{{How Can a Cartel Be Detected?}}},
doi = {{10.1007/s11294-009-9235-6}},
volume = {{15}},
year = {{2009}},
}
@article{6791,
author = {{von Blanckenburg, Korbinian and Geist, Alexander}},
journal = {{International Advances in Economic Research}},
number = {{1}},
pages = {{140--141}},
publisher = {{Springer}},
title = {{{Analyzing Market Workability with the CFD-Concept}}},
doi = {{https://doi.org/10.1007/s11294-008-9195-2 }},
volume = {{15}},
year = {{2009}},
}
@inbook{6857,
author = {{von Blanckenburg, Korbinian}},
booktitle = {{Trikotsponsoring 2008/09 – Was die Fans der 1. Fußball-Bundesliga über die Sponsoren ihrer Vereine denken}},
editor = {{Woisetschläger, David M. and Backhaus, Christof and Michaelis, Manuel}},
issn = {{1869-0025}},
publisher = {{Technische Universität Dortmund}},
title = {{{Hannover 96 verlängert Partnerschaft mit TUI bis 2011}}},
year = {{2009}},
}
@phdthesis{6886,
author = {{von Blanckenburg, Korbinian}},
isbn = {{978-3830045793}},
pages = {{358}},
publisher = {{Kovač }},
title = {{{Entwicklung und Anwendung von ökonometrischen Testverfahren zur Koordinationsmängeldiagnose}}},
volume = {{ 48}},
year = {{2009}},
}
@article{6889,
author = {{von Blanckenburg, Korbinian and Geist, Alexander and Schmidt, Jörg}},
journal = {{CAWM Discussion Paper}},
publisher = {{Westfälische Wilhelms-Universität Münster, Centrum für Angewandte Wirtschaftsforschung (CAWM)}},
title = {{{Does wage rigidity really exist? New evidence from US panel data }}},
volume = {{13}},
year = {{2009}},
}
@article{6890,
author = {{von Blanckenburg, Korbinian and Hofkamp, Sascha}},
journal = {{Beiträge zur angewandten Wirtschaftsforschung / Centrum für Angewandte Wirtschaftsforschung Münster }},
pages = {{16 S.}},
publisher = {{CAWM}},
title = {{{Exakte Bestimmung der Stabilitätsbedingungen von Marktprozessen auf der Basis des Koordinationsmängel-Diagnosekonzepts und des Schur-Theorems}}},
volume = {{31}},
year = {{2009}},
}
@article{6891,
author = {{von Blanckenburg, Korbinian}},
journal = {{Beiträge zur angewandten Wirtschaftsforschung / Centrum für Angewandte Wirtschaftsforschung Münster }},
pages = {{32 S.}},
publisher = {{CAWM}},
title = {{{Die Halbwertzeit einer Störungserosion}}},
volume = {{30}},
year = {{2009}},
}
@phdthesis{7146,
author = {{Nordhoff, Daniel}},
isbn = {{ 978-3-8300-4536-6}},
publisher = {{Kovac}},
title = {{{Umsatzsteuerausfall und Umsatzsteuerbetrug - Eine steuerökonomische Analyse der Umsatzsteuerdeklaration}}},
year = {{2009}},
}
@article{7230,
author = {{Nordhoff, Daniel and Popp, Matthias}},
journal = {{niedersächsische Wirtschaft}},
number = {{9/2009}},
pages = {{16--17}},
title = {{{Strukturprobleme angehen}}},
year = {{2009}},
}
@misc{7614,
author = {{Köhler, Martin and Förster, Marc-Oliver}},
pages = {{7--15}},
publisher = {{Forschungsinstitut für Tief- und Rohrleitungs¬bau Weimar e. V.}},
title = {{{Entwicklung eines dauerhaft flexiblen Reparaturstutzens für Einläufe der Grundstücksentwässerung in der Stadt Rietberg}}},
year = {{2009}},
}
@misc{7615,
author = {{Köhler, Martin}},
booktitle = {{FGSV-Kolloquium "Kommunale Straßen" am 4./5. März 2009 in Kassel}},
publisher = {{FGSV-Verlag}},
title = {{{Schäden an Verkehrsflächenbefestigungen infolge undichter Hausanschlussstutzen an den Hauptkanal}}},
year = {{2009}},
}
@misc{11226,
author = {{Löb, Patrick and Schütt, Christian and Illg, Tobias and Kritschl, Ulrich and Metzke, Daniel and Hofmann, Christian and Kost, Hans-Jürgen and Baier, Tobias and Brunklaus, Sabine and Schelhaas, Karl-Peter and Hessel, Volker and Schönfeld, Friedhelm}},
booktitle = {{Towards sustainbale engineering development : South African Chemical Engineering Congress; 20 - 23 September 2009, [Somerset West]}},
editor = {{Callanan, Linda}},
isbn = {{978-1-920355-21-0}},
location = {{Somerset West }},
pages = {{77}},
publisher = {{SAIChE (South African Institution of Chemical Engineers)}},
title = {{{Consideration of flow distribution within a multi-scale reactor set-up for ionic liquid production}}},
year = {{2009}},
}
@misc{11644,
author = {{Rohler, Hans-Peter}},
booktitle = {{G + L : Magazin für Landschaftsarchitektur und Stadtplanung}},
issn = {{0942-7538}},
number = {{01}},
pages = {{23–26}},
publisher = {{Georg GmbH}},
title = {{{Pflege auf regionaler Ebene : Strategien für den Emscher Landschaftspark}}},
volume = {{119}},
year = {{2009}},
}
@misc{12255,
abstract = {{Vorgeschlagen wird eine Vorrichtung zum Testen von kosmetischen und pharmazeutischen Rohstoffen beinhaltend eine Membran, die über ein Behältnis gespannt wird, welches ein Hydrogel als tragenden Untergrund für die Membran enthält. }},
author = {{Bruns, Christiane and Kutz, Gerd and Prinz, Daniela}},
pages = {{1}},
title = {{{Hautmodell}}},
year = {{2009}},
}
@misc{1366,
author = {{Eckert, Thore}},
pages = {{71}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Music and video production for promotional purposes : Realization, conception and design for the band JT And The Funky Monkeys}}},
year = {{2009}},
}
@misc{1368,
author = {{Kottulla, Kathleen and Ehring, Susann}},
pages = {{27}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{The Lunatics - Territoria Xl ; Konzeption und Realisierung einer filmischen Dokumentation über eine internationale Künstlergruppe}}},
year = {{2009}},
}
@book{1370,
author = {{Löfflad, Klaus}},
isbn = {{978-3-639-14438-3 }},
pages = {{64}},
publisher = {{VDM Verlag Dr. Müller}},
title = {{{Remotedebugger für Echtzeitanwendungen mit RTLinux }}},
year = {{2009}},
}
@misc{1371,
author = {{Büter, Bianca}},
keywords = {{Filmproduktion, Producer, film production, producer}},
pages = {{154}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Zerbochen (AT)}}},
year = {{2009}},
}
@misc{1373,
author = {{Olearczyk, Jennifer}},
pages = {{145}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Kurzspielfilm "Zerbrochen (AT)" : Produktions- und 1. Aufnahmeleitung}}},
year = {{2009}},
}
@misc{1375,
author = {{Gördes, Barbara}},
pages = {{159}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Kurzspielfilm "Zerbrochen (AT)", Drehbuch und Regie}}},
year = {{2009}},
}
@misc{1377,
author = {{Baudeck, Stefan}},
pages = {{57}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Orden Organ - Nobody Leaves}}},
year = {{2009}},
}
@misc{1379,
author = {{Heinzel, Kerstin}},
pages = {{77}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Verleih- Manager : Konzeption und Entwicklung eines Online-Verleihsystems für die Geräteausleihe des Fachbereiches Medienproduktion}}},
year = {{2009}},
}
@misc{1381,
author = {{Ewers, Daniel}},
pages = {{25}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Imagefilm Bäckerei Wölke}}},
year = {{2009}},
}
@misc{1382,
author = {{Lobermeier, Marina and Mewes, Stephanie and Schwarze, Kerstin}},
pages = {{61}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Frauenpowertag 2009}}},
year = {{2009}},
}
@misc{1383,
author = {{Szydlowski, Nicolas}},
pages = {{20}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Imagefilm für die Bäckerei Wölke, Schloss-Holte}}},
year = {{2009}},
}
@misc{1385,
author = {{Uhte, Sandra}},
pages = {{116}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Designkonzepte}}},
year = {{2009}},
}
@misc{1387,
author = {{Alberty, Holger K.}},
pages = {{71}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Zerbrochen : eine Ausstattungsarbeit}}},
year = {{2009}},
}
@misc{1389,
author = {{Hoppe, Nicole}},
keywords = {{Chile Projekt 2009, Design, Leitfaden}},
pages = {{105}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Das Chile Projekt 2009 : Entwicklung eines Basisdesign und eines Leitfadens für das sozial-kulturelle Projektteam der HS OWL zur Unterstützung des sog. Chile Projekts der Fundacion Juan XXIII}}},
year = {{2009}},
}
@misc{1391,
author = {{Pries, Dieter}},
pages = {{101 / 37}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{touch;see;react; : Konzeption und Realisierung eines Multitouch-Systems sowie Programmierung und Design der Anwendungen}}},
year = {{2009}},
}
@misc{1394,
author = {{Stücke, Sebastian and Wendling, Markus}},
pages = {{44}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Momentaufnahme K.O. Götz}}},
year = {{2009}},
}
@misc{1396,
author = {{Wienke, Marc}},
pages = {{33}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{akquinet : Präsentation eines IT- Unternehmens durch Videostatements}}},
year = {{2009}},
}
@misc{1398,
author = {{Wegener, Björn}},
pages = {{27}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Engelbert - Mama ich komme wieder : Dokumentation einer Audiographie}}},
year = {{2009}},
}
@misc{1400,
author = {{Schulte, Nina}},
pages = {{158}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Schüco engergy 2}}},
year = {{2009}},
}
@misc{1401,
author = {{Krüger, Lars}},
pages = {{140}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Das Gestaltungskonzept ; Das Gestaltungshandbuch ; Die neuen Gestaltungsrichtlinien der niedersächsischen Gemeinde Wardenbu}}},
year = {{2009}},
}
@misc{1403,
author = {{Rose, Max}},
pages = {{50}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption und Entwicklung eines dreidimensionalen Computerspiels}}},
year = {{2009}},
}
@misc{1405,
author = {{Cerqueiro, David}},
pages = {{68}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Es gibt nur 1 : concept, design and production of audiovisual advertising spots for 1LIVE radio station}}},
year = {{2009}},
}
@misc{1407,
author = {{Windmöller, Claas and Bergsohn, Patrik and Nolting, Malte and Weßling, Jens}},
pages = {{34 / 27 / 35 / 41}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Erstellung eines Kinowerbespots}}},
year = {{2009}},
}
@misc{1412,
author = {{Purrmann, Peter and Müller, Thomas}},
pages = {{24 / 35}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Von Ziegen und Zellteilung: Möbelindustrie in Steinheim}}},
year = {{2009}},
}
@misc{1415,
abstract = {{As a final work for the Master of Arts in Media Production at the Hochschule Ostwestfalen Lippe in Lemgo, Germany, I took on the task of producing a high quality narrative short film, which could also serve as a festival contender and calling card into the film industry. For this purpose I decided to produce a script with dramatic elements of genres like Drama and Mystery and step into the whole production process of making a Low-No-Budget film. The considerations taken in including elements of Genre, as well as taking a different look on a theme that has been very much exhausted in Germany, like the Berlin Wall, were major points in the developing of the story. Then also adhering to high standard film making in a No- Budget, student production, were major challenges that needed to be overcome. The process and result shows how film making dynamics and new forms of funding and producing can be now carried out with the help of new technologies and Internet presence, achieving high quality results with a very low or nonexistent budget.}},
author = {{Agudo, Xavier}},
pages = {{119}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Production of the Short film The Line}}},
year = {{2009}},
}
@misc{1417,
abstract = {{This work makes a review of what is conceptualized as a documentary. New technologies stretch those boundaries and it is necessary to recall what will be the fundamental. Non-fictional animation is one of those outcomes. It fits within documentary but in its own peculiar way. It has opened a path to the interior of the human thought process. On a technical ground, the project explores the possibilities of alternative animation procedures that allow low budget productions to achieve broadcast quality.}},
author = {{Fallas, Luis Fernando}},
pages = {{118}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Banana-Express : an Animadoc}}},
year = {{2009}},
}
@misc{1419,
author = {{Vorwald, Timo and Brinkmann, Frederik}},
pages = {{68}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Das ungeliebte Geschenk}}},
year = {{2009}},
}
@misc{1421,
author = {{Kalinkin, Nastja}},
pages = {{55}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption, Gestaltung und Realisation eines Corporate Designs für ein Modedesignunternehmen}}},
year = {{2009}},
}
@misc{1423,
author = {{Cesenov, Eduard and Driessen, Jann}},
pages = {{81}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Production of a Music Video with Special Emphasis on Compositing}}},
year = {{2009}},
}
@misc{1425,
author = {{Kröninger, Peter}},
pages = {{50}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Hell-G "Happy Cadaver" : Realisierung eines Musikvideos}}},
year = {{2009}},
}
@misc{1427,
author = {{Biernat, Andreas}},
pages = {{18}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Deutschlands vergessene Kinder : Erstellen von Musik-Video-Clips mit sozialkritischen Inhalten.}}},
year = {{2009}},
}
@misc{1431,
author = {{Winmöller, Claas}},
pages = {{27}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Erstellung eines Kinowerbespots : Schwerpunkt Produktionsorganisation}}},
year = {{2009}},
}
@misc{1433,
author = {{Lueschow, Johannes}},
pages = {{58}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Runter vom Gas : Alein zu zweit}}},
year = {{2009}},
}
@inproceedings{2075,
abstract = {{Automatic sheet inspection in banknote production has been used as a standard quality control tool for more than a decade. As more and more print techniques and new security features are established, total quality in bank note printing must be guaranteed. This aspect has a direct impact on the research and development for bank note inspection systems in general in the sense of technological sustainability. It is accepted, that print defects are generated not only by printing parameter changes, but also by mechanical machine parameter changes, which will change unnoticed in production. Therefore, a new concept for a multi-sensory adaptive learning and classification model based on Fuzzy-Pattern- Classifiers for data inspection and machine conditioning is proposed. A general aim is to improve the known inspection techniques and propose an inspection methodology that can ensure a comprehensive quality control of the printed substrates processed by printing presses, especially printing presses which are designed to process substrates used in the course of the production of banknotes, security documents and others. Therefore, the research and development work in this area necessitates a change in concept for banknote inspection in general. In this paper a new generation of FPGA (Field Programmable Gate Array) based real time inspection technology is presented, which allows not only colour inspection on banknote sheets, but has also the implementation flexibility for various inspection algorithms for security features, such as window threads, embedded threads, OVDs, watermarks, screen printing etc., and multi-sensory data processing. A variety of algorithms is described in the paper, which are designed for and implemented on FPGAs. The focus is based on algorithmic approaches}},
author = {{Lohweg, Volker and Li, Rui and Türke, Thomas and Willeke, Harald and Schaede, Johannes}},
booktitle = {{21st annual Symposium on IST/SPIE Electronic Imaging, 18 -22 January 2009,}},
title = {{{FPGA-based Multi-sensor Real Time Machine Vision for Banknote Printing}}},
doi = {{https://doi.org/10.1117/12.805427}},
year = {{2009}},
}
@inbook{2076,
abstract = {{Segmentation and feature extraction algorithms based on Wavelet Transform or Wavelet Packet Transform are established in pattern recognition. Especially in the field of texture analysis they are known to be practical. One difficulty of texture analysis was in the past the characterization of different printing processes. In this paper we present a new algorithmic concept to feature extraction of textures, printed by different printing techniques, without the necessity of a previous teaching phase. The typical characters of distinct printed textures are extracted by first order statistical moments of wavelet coefficients. The algorithm uses the 2D incomplete shift invariant Wavelet Packet Transform, resulting in a fast execution time of O(Nlog2(N)). Since the incomplete shift invariant Wavelet Packet Transform was exclusively defined for 1D-signals, it has been modified in this research. The application describes the detection of different printed security textures. }},
author = {{Glock, Stefan and Gillich, Eugen and Schaede, Johannes and Lohweg, Volker}},
booktitle = {{Pattern Recognition}},
editor = {{Denzler, J. and Notni, G. and Süße, H.}},
isbn = {{978-3-642-03797-9}},
keywords = {{Discrete Wavelet Transform, Wavelet Transform, Wavelet Packet, Decomposition Level, Printing Technique}},
pages = {{422--431}},
publisher = {{Springer}},
title = {{{Feature Extraction Algorithm for Banknote Textures based on Incomplete Shift Invariant Wavelet Packet Transform}}},
doi = {{https://doi.org/10.1007/978-3-642-03798-6_43}},
volume = {{5748}},
year = {{2009}},
}
@inproceedings{2077,
abstract = {{In this paper we present an optical measurement system approach for quality analysis of brakes which are used in high-speed trains. The brakes consist of the so called brake discs and pads. In a deceleration process the discs will be heated up to 500°C. The quality measure is based on the fact that the heated brake discs should not generate hot spots inside the brake material. Instead, the brake disc should be heated homogeneously by the deceleration. Therefore, it makes sense to analyze the number of hot spots and their relative gradients to create a quality measure for train brakes. In this contribution we present a new approach for a quality measurement system which is based on an image analysis and classification of infra-red based heat images. Brake images which are represented in pseudo-color are first transformed in a linear grayscale space by a hue-saturation-intensity (HSI) space. This transform is necessary for the following gradient analysis which is based on gray scale gradient filters. Furthermore, different features based on Haralick's measures are generated from the gray scale and gradient images. A following Fuzzy-Pattern-Classifier is used for the classification of good and bad brakes. It has to be pointed out that the classifier returns a score value for each brake which is between 0 and 100% good quality. This fact guarantees that not only good and bad bakes can be distinguished, but also their quality can be labeled. The results show that all critical thermal patterns of train brakes can be sensed and verified.}},
author = {{Glock, Stefan and Hausmann, Stefan and Gerke, Sebastian and Warok, Alexander and Spiess, Peter and Witte, Stefan and Lohweg, Volker}},
booktitle = {{Optical measurement systems for industrial inspection VI : 15 - 18 June 2009, Munich, Germany / sponsored by SPIE Europe. Peter H. Lehmann, ed. ; Pt. 2 }},
isbn = {{ 9780819476722 }},
location = {{München}},
publisher = {{SPIE }},
title = {{{Optical classification for quality and defect analysis of train brakes}}},
doi = {{https://doi.org/10.1117/12.827457}},
volume = {{7389}},
year = {{2009}},
}
@inproceedings{2078,
author = {{Lohweg, Volker and Gillich, Eugen and Schaede, Johannes}},
booktitle = {{inIT KBA-Giori International Workshop on "Detection of Banknote Forgeries", Blomberg, 10-12 August 2009}},
title = {{{New Concepts in Banknote Authentication}}},
year = {{2009}},
}
@inproceedings{2079,
author = {{Iqbal, Taswar and Dicks, Alexander and Lohweg, Volker}},
publisher = {{32nd Annual Conference on Artificial Intelligence Paderborn | September 15 – 18, 2009, accepted for Publication}},
title = {{{Metal Surface Coding as a trusted body for brand labeling, KI 2009, Artificial Intelligence and Automation (AI at Universities of Applied Sciences)}}},
year = {{2009}},
}
@inproceedings{2080,
author = {{Ehlenbröker, Jan-Friedrich and Voth, Karl and Lohweg, Volker}},
booktitle = {{32nd Annual Conference on Artificial Intelligence Paderborn | September 15 – 18, 2009, accepted for Publication}},
title = {{{Human-based surface detection: KI 2009, Artificial Intelligence and Automation (AI at Universities of Applied Sciences) }}},
year = {{2009}},
}
@inproceedings{2081,
abstract = {{This paper presents a novel modular fuzzy patternclassifier design framework for intelligent automation systems, developed on the base of the established Modified Fuzzy PatternClassifier (MFPC) and that allows designing novel classifier mod-els which are hardware-efficiently implementable. The perfor-mances of novel classifiers using substitutes of MFPC’s geometricmean aggregator are benchmarked in the scope of an imageprocessing application against the MFPC to reveal classificationimprovement potentials for obtaining higher classification rates.}},
author = {{Mönks, Uwe and Lohweg, Volker and Larsen, Henrik Legind}},
booktitle = {{KI 2009 Workshop, Paderborn | September 15th, 2009, accepted for Publication}},
title = {{{Aggregation Operator Based Fuzzy Pattern Classifier Design, Machine Learning in Real-Time Applications (MLRTA 09)}}},
year = {{2009}},
}
@inproceedings{2082,
abstract = {{A robust vision system for the counterfeit detection of bank ATM keyboards is presented. The approach is based on the continuous inspection of a keyboard surface by the authenticity verification of coded covert surface features. For the surface coding suitable visual patterns on the keyboard are selected while considering constraints from the visual imperceptibility, robustness and geometrical disturbances to be encountered from the aging effects. The system’s robustness against varying camera-keyboard distances, lighting conditions and dirt-and-scratches effects is investigated. Finally, a demonstrator working in real-time is developed in order to publicly demonstrate the surface authentication process.}},
author = {{Iqbal, Taswar and Le, Dinh Khoi and Nolte, Michael and Lohweg, Volker}},
booktitle = {{32nd Annual Conference on Artificial Intelligence Paderborn | September 15 – 18, 2009, accepted for Publication}},
isbn = {{978-3-642-04616-2}},
keywords = {{ATMs, human perception, counterfeit resistance, digital authentication, surface coding, pattern recognition}},
pages = {{347--354}},
publisher = {{Springer}},
title = {{{Human Perception Based Counterfeit Detection for Automated Teller Machines, KI 2009, Artificial Intelligence and Automation }}},
doi = {{https://doi.org/10.1007/978-3-642-04617-9_44}},
volume = {{5803}},
year = {{2009}},
}
@inproceedings{2083,
author = {{Lohweg, Volker and Niggemann, Oliver}},
booktitle = {{Lemgoer Schriften zur industriellen Informationstechnik (Lemgo Series on Industrial Information Technology), Vol. 3, ISSN 1869-2087, Lemgo 2009}},
title = {{{Machine Learning in Real-time Applications (MLRTA09 - KI 2009 Workshop)}}},
year = {{2009}},
}
@inbook{2322,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
booktitle = {{IUTAM Symposium on Progress in the Theory and Numerics of Configurational Mechanics}},
editor = {{Steinmann, P.}},
pages = {{95--105}},
publisher = {{Springer-Verlag}},
title = {{{A variational framework for dual solutions in the physical and material space}}},
doi = {{10.1007/978-90-481-3447-2_9}},
volume = {{17}},
year = {{2009}},
}
@article{2327,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
journal = {{Computer Methods in Applied Mecanics and Engineering}},
number = {{41-44}},
pages = {{3335--3351}},
title = {{{Goal-oriented r-adaptivity based on variational arguments in the physical and material spaces}}},
doi = {{10.1016/j.cma.2009.06.015}},
volume = {{198}},
year = {{2009}},
}
@article{2328,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
journal = {{Zeitschrift für Angewandte Mathematik und Mechanik}},
number = {{8}},
pages = {{666--676}},
title = {{{Configurational variations for the primal and dual problem in elasticity}}},
doi = {{10.1002/zamm.200800144}},
volume = {{89}},
year = {{2009}},
}
@misc{2349,
author = {{Frahm, Björn and Brod, Helmut and Langer, Uwe}},
booktitle = {{Cytotechnology}},
issn = {{1573-0778}},
number = {{1}},
pages = {{17--30}},
publisher = {{Springer}},
title = {{{Improving bioreactor cultivation conditions for sensitive cell lines by dynamic membrane aeration}}},
doi = {{10.1007/s10616-009-9189-9}},
volume = {{59}},
year = {{2009}},
}
@misc{2361,
author = {{Becker, Barbara and Hildebrandt, Goetz and Erol, Irfan and Kleer, Josef and Manopas, Aranya Sira}},
booktitle = {{Fleischwirtschaft }},
number = {{7}},
pages = {{61--65}},
title = {{{Von der Döner - Prüfung zum Döner - Heariing}}},
year = {{2009}},
}
@article{2566,
author = {{Loncaric, D. and Paulsen, P. and Tichy, A. and Smulders, Frans J.M. and Upmann, Matthias}},
journal = {{Wiener Tierärztl. Monatsschr.}},
pages = {{135--144}},
title = {{{The microbiological effects of poor slaughter and processing hygiene in mutton production as determined by various marker organisms}}},
volume = {{96}},
year = {{2009}},
}
@inproceedings{2567,
author = {{Upmann, Matthias and Stucke, G. and Stiebing, A.}},
location = {{Lemgo}},
title = {{{Geflügelfleischverarbeitungsstandards und QUID - Werden Geflügelfleischerzeugnisse diskriminiert?}}},
year = {{2009}},
}
@article{2637,
abstract = {{Anaplerotic TH (glycerol triheptanoate) is used for the chronic oral treatment of long-chain fatty acid oxidation disorders (FOD). To test whether TH could also be used for the acute intravenous treatment of decompensated FOD patients, we investigated the metabolism and metabolic effects of triheptanoin emulsion administered parenterally or enterally. Rats were infused with TH emulsion (intravenously or intragastrically). Stable isotope tracers were infused intravenously to measure the rates of appearance (Ra) of plasma glucose, glycerol and fatty acids. Surprisingly, intravenous infusion of triheptanoin markedly increased glycerol Ra but not oleate Ra. This indicated that massive lipolysis induced by intravenous TH was not accompanied by the release of long-chain fatty acids from adipocytes. This probably results from the contribution of anaplerotic propionyl-CoA moiety of heptanoate to glyceroneogenesis in adipocytes, generating sufficient amounts of glycerol-3-phosphate to re-esterify the fatty acids derived from stimulated lipolysis. The intraduodenal infusion of TH did not induce lipolysis because TH was hydrolyzed in the gut. Our data support the use of intravenous TH emulsion for the acute treatment of FOD patients (for whom the release of fatty acids from adipocytes would be harmful). Supported by NIH.}},
author = {{Gu, Lei and Zhang, Guofang and S. Kombu, Rajan and Kutz, Gerd and Brewer, Wolf-Ulrich and Roe, Charles R. and Brunengraber, Henri}},
issn = {{1530-6860}},
journal = {{ The FASEB journal : the official journal of the Federation of American Societies for Experimental Biology}},
number = {{4}},
pages = {{506.3}},
publisher = {{Wiley}},
title = {{{Metabolism and metabolic effects of anaplerotic triheptanoin (TH) in normal rats}}},
doi = {{ https://doi.org/10.1096/fasebj.23.1_supplement.506.3}},
volume = {{23}},
year = {{2009}},
}
@book{2691,
author = {{Ernesti, Werner and Kattenbusch, Markus and Kuhlenkamp, Dieter and Kuhne, Volker and Neuenhagen, Helmhard and Noosten, Dirk and Stiglocher, Hans and Grau, Heidrun}},
isbn = {{978-3871041617}},
pages = {{187}},
publisher = {{Bruderverlag}},
title = {{{Plümecke – Preisermittlung im Holzbau}}},
year = {{2009}},
}
@inproceedings{3981,
author = {{Kutz, Gerd}},
location = {{Amman (Jordanien)}},
title = {{{Current Emulsification Techniques}}},
year = {{2009}},
}
@inbook{3985,
author = {{Kutz, Gerd}},
booktitle = {{Innovationen : Herausforderungen und Chancen}},
isbn = {{978-3-87846-271-2}},
publisher = {{Verlag für chemische Industrie}},
title = {{{Aktuelle Rohstoffe und Formulierungsstrategien}}},
volume = {{33}},
year = {{2009}},
}
@article{3998,
abstract = {{Die Hardware-in-the-Loop-Simulation (HiL) zählt als ein Standardwerkzeug in der Elektronikentwicklung, wobei sich der Test am HiL-Simulator vom Test einzelner Funktionen über den Komponententest bis hin zum Integrationstest ganzer Steuergeräte-Netzwerke erstreckt. Bei der HiL-Simulation werden dem zu testenden Steuergerät Sensorsignale vorgegeben, die in Echtzeit aus einem dynamischen Simulationsmodell der Steuergeräteumgebung erzeugt werden. Die Steuergeräte-Ausgangssignale als Reaktion auf die Eingangssignale dienen dem Echtzeit-Modell als Eingangsgrößen, wodurch das Steuergerät am Labortisch so betrieben werden kann, als wäre es im echten Fahrzeug eingebaut. Die HiL-Simulation wird hier auf mechatronische Steuergeräte angewandt, bei denen Sensoren und/oder Aktoren integriert sind. Die HiL-Simulation für die elektrische Servolenkung wird auf einem mechanischen Prüfstand mit Belastungseinrichtung und auf elektrischer Leistungsebene für Software und elektrische Funktion des Lenksystems vorgenommen. Für die Prüfung eines ESP-Steuergeräts wird eine 3D-Bewegungsplattform verwendet, auf deren Basis der interne Sensorcluster mechanisch stimuliert werden kann. über eine Verkopplung des Prüfstandes an ein HiL-System mit Fahrdynamikmodell kann eine physikalisch richtige Simulation des Fahrmanövers vorgenommen werden.}},
author = {{Schulte, Thomas and Plöger, M. and Filgerdamm, A.}},
isbn = {{1614-0125}},
journal = {{Elektronik automotive}},
number = {{3}},
publisher = {{WEKA Fachmedien}},
title = {{{Mechatronik-Test: HiL-Simulation für mechatronische Systeme aus den Bereichen Fahrdynamik und elektrische Servolenkung}}},
year = {{2009}},
}
@article{4049,
abstract = {{Die Hardware-in-the-Loop-Simulation (HiL) zählt als ein Standardwerkzeug in der Elektronikentwicklung, wobei sich der Test am HiL-Simulator vom Test einzelner Funktionen über den Komponententest bis hin zum Integrationstest ganzer Steuergeräte-Netzwerke erstreckt. Bei der HiL-Simulation werden dem zu testenden Steuergerät Sensorsignale vorgegeben, die in Echtzeit aus einem dynamischen Simulationsmodell der Steuergeräteumgebung erzeugt werden. Die Steuergeräte-Ausgangssignale als Reaktion auf die Eingangssignale dienen dem Echtzeit-Modell als Eingangsgrößen, wodurch das Steuergerät am Labortisch so betrieben werden kann, als wäre es im echten Fahrzeug eingebaut. Die HiL-Simulation wird hier auf mechatronische Steuergeräte angewandt, bei denen Sensoren und/oder Aktoren integriert sind. Die HiL-Simulation für die elektrische Servolenkung wird auf einem mechanischen Prüfstand mit Belastungseinrichtung und auf elektrischer Leistungsebene für Software und elektrische Funktion des Lenksystems vorgenommen. Für die Prüfung eines ESP-Steuergeräts wird eine 3D-Bewegungsplattform verwendet, auf deren Basis der interne Sensorcluster mechanisch stimuliert werden kann. über eine Verkopplung des Prüfstandes an ein HiL-System mit Fahrdynamikmodell kann eine physikalisch richtige Simulation des Fahrmanövers vorgenommen werden.}},
author = {{Schulte, Thomas and Plöger, Markus and Filgerdamm, Andreas}},
issn = {{0013-5658}},
journal = {{Elektronik automotive : Magazin für Entwicklungen in der Kfz-Elektronik und Telematik}},
number = {{3}},
pages = {{36 -- 39}},
publisher = {{WEKA}},
title = {{{Mechatronik-Test : HiL-Simulation für mechatronische Systeme aus den Bereichen Fahrdynamik und elektrische Servolenkung.}}},
year = {{2009}},
}
@inproceedings{4186,
author = {{Ramke, Hans-Günter and Blöhse, Dennis and Lehmann, Hans-Joachim and Fettig, Joachim}},
booktitle = {{Sardinia 2009: Twelfth International Waste Management and Landfill Symposium}},
editor = {{Cossu, Raffaello and Diaz, Luis F. and Stegmann, Rainer}},
location = {{ S. Margherita di Pula (Cagliari), Sardinia, Italy}},
publisher = {{CISA Publisher}},
title = {{{Hydrothermal Carbonization of Organic Waste}}},
year = {{2009}},
}
@book{4215,
author = {{Nerreter, Wolfgang and Flegel, Georg and Birnstiel, Karl and Borcherding, Holger and Meier, Uwe}},
isbn = {{978-3-446-41906-3}},
pages = {{347}},
publisher = {{Carl Hanser Verlag}},
title = {{{Elektrotechnik für Maschinenbau und Mechatronik}}},
year = {{2009}},
}
@inproceedings{4216,
author = {{Borcherding, Holger}},
booktitle = {{Internationaler ETG-Kongress 2009 (ETG-FB 118) : Fachtagung 1: Intelligente Netze / Fachtagung 2: Leistungselektronik in Netzen}},
editor = {{Kreusel, J.}},
isbn = {{978-3-8007-3194-7}},
location = {{Düsseldorf}},
pages = {{399 -- 402}},
publisher = {{VDE-Verlag}},
title = {{{Über den Inhalt der IEC 62578 DTS: Technical Specification: Operations and Characteristics of activeinfeed converter applications}}},
year = {{2009}},
}
@inproceedings{4217,
author = {{Borcherding, Holger and Teisch, Arthur and Obernolte, Urs}},
booktitle = {{Internationaler ETG-Kongress 2009 (ETG-FB 119) : Fachtagung 3: Direktantriebe in Produktionsmaschinen und Industrieanlagen - Generatoren und Antriebe in regenerativen Kraftwerken / Fachtagung 4: Diagnostik elektrischer Betriebsmittel}},
isbn = {{978-3-8007-3195-4}},
location = {{Düsseldorf}},
pages = {{103 -- 108}},
publisher = {{VDE-Verlag}},
title = {{{Verbesserte Energieeffizienz durch direktangetriebene winkelgeberlose drehzahlgeregelte Spindeln bei Mehrachsbohrköpfen für die holzverarbeitende Industrie}}},
year = {{2009}},
}
@inproceedings{4291,
author = {{Borcherding, Holger}},
location = {{Düsseldorf}},
title = {{{Technical Specification: Operations and Characteristics of active infeed converter application}}},
year = {{2009}},
}
@inbook{466,
author = {{Hinrichsen, Sven and Steiger, Peter and Jeske, Tim and Schlick, Christopher M.}},
booktitle = {{Industrielle Dienstleistungen und Internationalisierung}},
editor = {{Schenk, Michael and Schlick, Christopher M.}},
isbn = {{978-3-8349-1359-3}},
pages = {{201--209}},
publisher = {{Gabler}},
title = {{{Methode zur Prognose des Zeitverbrauchs in internationalen Planungsprojekten}}},
year = {{2009}},
}
@inproceedings{467,
author = {{Jeske, Tim and Hinrichsen, Sven and Tackenberg, Sven and Duckwitz, Sönke and Schlick, Christopher M.}},
booktitle = {{Arbeit, Beschäftigungsfähigkeit und Produktivität im 21. Jahrhundert}},
editor = {{Schütte, Martin}},
isbn = {{978-3-936804-07-9}},
location = {{Dortmund}},
pages = {{185--188}},
publisher = {{GfA-Press}},
title = {{{Entwicklung einer Methode zur Prognose von Anlernzeiten}}},
year = {{2009}},
}
@inproceedings{4673,
abstract = {{Privacy violations are one of the main problems encountered in technology-enhanced environments. In order to design privacy- reserving technologies it is important to understand the social, psychological, and architectural aspects of privacy and incorporate them into the development process of future systems. Therefore, this paper illustrates the effects of privacy on human beings and explains why it is so important to maintain an individual private sphere. In the second part, the paper takes a closer look at the physical means, which are used to create an atmosphere of privacy within buildings and shows different ways of achieving personal privacy in architectural spaces.}},
author = {{Röcker, Carsten and Feith, Alexandra}},
booktitle = {{Proceedings of the International Symposium on Computing, Communication and Control (ISCCC'09)}},
keywords = {{Privacy, Ubiquitous Computing, Ambient Intelligence, Technology-Enhanced Environmen, Smart Spaces, Architecture.}},
location = {{Singnapore}},
pages = {{201--205}},
title = {{{Revisiting Privacy in Smart Spaces: Social and Architectural Aspects of Privacy in Technology-Enhanced Environments}}},
year = {{2009}},
}
@inproceedings{4674,
abstract = {{More and more knowledge-based enterprises start to integrate Ambient Intelligence technologies into their business processes. While the usage of such technologies can lead to considerable benefits in a variety of business areas, the envisioned applications have to meet fundamental user needs, otherwise the negative side effects will overshadow the prospective benefits. This paper illustrates the benefits as well as potential risks of implementing Ambient Intelligence applications in knowledge-based enterprises and identifies the crucial aspects of successful system design.}},
author = {{Röcker, Carsten}},
booktitle = {{Proceedings of the International Conference on Economics, Business, Management and Marketing (EBMM'09), October 9 -11, Singapore, pp. 17 - 21}},
isbn = {{978-9-8108-3816-4 }},
keywords = {{Ambient Intelligence, Ubiquitous Computing, Technology-Enhanced Environments, Smart Spaces, Intellectual Teamwork, Knowledge-Based Enterprises}},
location = {{Signapore}},
pages = {{17--21}},
title = {{{Toward Smart Office Environments - Benefits and Drawbacks of Using Ambient Intelligence Technologies in Knowledge-Based Enterprises}}},
year = {{2009}},
}
@inproceedings{4675,
abstract = {{This paper analyzes if, and in which extend, the social work situation influences the intention of potential users to employ Ambient Intelligence technologies in work environments. In a first step, existing application scenarios and prototype applications were analyzed to identify characteristic functionalities of future workplace systems. In the second step, it was tested whether potential end users are willing to employ the identified functionalities in different social situations. The results of the evaluation show, that the social work situation, in which a functionality is going to be used, has a highly significant influence on the participants’ usage intention.}},
author = {{Röcker, Carsten}},
booktitle = {{Proceedings of the 9th International Conference on Work With Computer Systems (WWCS'09), Beijing, China}},
keywords = {{Ambient Intelligence, Ubiquitous Computing, Smart Spaces, Aesthetics, Design, Architecture, Urban Informatics}},
location = {{Beijing, China}},
title = {{{Acceptance of Future Workplace Systems: How the Social Situation Influences the Usage Intention of Ambient Intelligence Technologies in Work Environments}}},
year = {{2009}},
}
@inproceedings{4676,
abstract = {{This paper describes a multi-national study evaluating the perceived usefulness and perceived ease of use of Ambient Intelligence (AmI) applications in office environments. In a first step, existing usage scenarios were analyzed to identify characteristic functionalities and application domains. The identified core functionalities were integrated into a representative and coherent evaluation scenario, which was presented to a target user population in a questionnaire-based study. The results of the study indicate, that the participants regard the described Ambient Intelligence functionalities as rather useful and easy to use. Nevertheless, moderate overall ratings for both factors show, that the acceptance of AmI technologies is not as high as often argued.}},
author = {{Röcker, Carsten}},
booktitle = {{ Human Centered Design}},
editor = {{Kuroso, Masaaki }},
isbn = {{978-3-642-02805-2}},
keywords = {{Ambient Intelligence, Ubiquitous Computing, Pervasive Computing, Technology Acceptance, Study, Perceived Usefulness, Perceived Ease-of-Use}},
location = {{San Diego, CA, USA}},
pages = {{1052--1061}},
publisher = {{Springer}},
title = {{{Perceived Usefulness and Perceived Ease-of-Use of Ambient Intelligence Applications in Office Environments}}},
doi = {{10.1007/978-3-642-02806-9_120}},
volume = {{5619}},
year = {{2009}},
}
@inproceedings{4678,
abstract = {{This paper provides an introduction into the evolution of information and communication technology and illustrates its usage in the work domain. The paper is sub-divided into two parts. The first part gives an overview over the different phases of information processing in the work domain. It starts by charting the past and present usage of computers in work environments and shows current technological trends, which are likely to influence future business applications. The second part starts by briefly describing, how the usage of computers changed business processes in the past, and presents first Ambient Intelligence applications based on identification and localization information, which are already used in the production and retail sector. Based on current systems and prototype applications, the paper gives an outlook of how Ambient Intelligence technologies could change business processes in the future.}},
author = {{Röcker, Carsten}},
booktitle = {{Proceedings of the International Conference on Innovation, Management and Technology (ICIMT'09)}},
issn = {{1307-6892}},
keywords = {{Ambient Intelligence, Ubiquitous Computing, Business Applications, Radio Frequency Identification (RFID).}},
location = {{Tokyo, Japan}},
number = {{5}},
pages = {{592 -- 603}},
publisher = {{World Academy of Science, Engineering and Technology}},
title = {{{Ambient Intelligence in the Production and Retail Sector: Emerging Opportunities and Potential Pitfalls}}},
doi = {{10.5281/zenodo.1083085}},
volume = {{3}},
year = {{2009}},
}
@inproceedings{4679,
abstract = {{The paper describes the program ‘eHealth – Enhancing Mobility with Aging’, an interdisciplinary research project at RWTH Aachen University. The program started in January 2009 as part of the Human Technology Centre, a newly established project house, funded by the Excellence Initiative of the German federal and state governments. The program aims at designing adaptive immersive interfaces for personal healthcare systems and develops novel, integrative prototypes for the design of user-centered healthcare systems. This includes new concepts of electronic monitoring systems within ambient living environments, suited to support persons individually (according to user profiles), adaptively (according to the course of disease) and sensitively (according to living conditions).}},
author = {{Ziefle, Martina and Röcker, Carsten and Kasugai, Kai and Klack, Lars and Jakobs, Eva-Maria and Schmitz-Rohde, Thomas and Russell, Peter and Borchers, Jan}},
booktitle = {{Roots for the Future of Ambient Intelligence, Adjunct Proceedings of the Third European Conference on Ambient Intelligence (AmI'09)}},
editor = {{Tscheligi, M. and de Ruyter, B. and Soldatos, J. and Meschtscherjakov, A. and Buiza, C. and Reitberger, W. and Streitz, N. and Mirlacher, T.}},
isbn = {{978-3-902737-00-7}},
keywords = {{Ambient Intelligence, Living Lab, Ambient Assisted Living, Smart Healthcare Environments, Intelligent User Interfaces}},
location = {{Salzburg, Austria}},
pages = {{2528}},
publisher = {{University of Salzburg}},
title = {{{eHealth – Enhancing Mobility with Aging}}},
year = {{2009}},
}
@inbook{468,
author = {{Jungkind, Wilfried and Brinker, Tobina}},
booktitle = {{Qualitätsentsentwicklung in Studium und Lehre}},
editor = {{Lent, Michael and von Richthofen, Anja}},
isbn = {{978-3-7639-3696-0 }},
keywords = {{Hochschuldidaktik, HOchschullehrer, Wissenschaftliche Weiterbildung, Netzwerk, Fachhochschule, Nordrhein-Westfalen}},
pages = {{122--132}},
publisher = {{WBV}},
title = {{{Hochschuldidaktische Weiterbildung der Lehrenden – das Netzwerk „hdw-nrw“}}},
year = {{2009}},
}
@inproceedings{469,
abstract = {{Production scheduling has attracted the interest of production economics communities for decades,
but there is still a gap between academic research, real -world problems, operations research and simulation. Genetic Algorithms (GA) represent a technique that has already been applied to a variety of combinatorial problems.
Simulation can be used to find a solution to problems through repetitive simulation runs or to prove a solution
computed by an optimization algorithm. We will explain the application of two special GAs for job -shop and resource-
constrained project scheduling problems trying to bridge the gap between problem solving by algorithm
and by simulation. Possible goals for scheduling problems are to minimize the makespan of a production program or to increase the due -date reliability of jobs or possibly any goal which can be described in a mathematical expression. The approach focuses on integrating a GA into a commercial software product and verifying the results with simulation.}},
author = {{Zülch, Gert and Steininger, Peter and Gamber, Thilo Gerhard and Leupold, Miachael}},
booktitle = {{Proceedings of the 2009 Winter Simulation Conference; Energy Alternatives}},
editor = {{Rossetti, M.D. and Hill, R.R. and Johansson, B. and Dunkin, A. and Ingalls, R.G.}},
isbn = {{9781424457700}},
location = {{New York}},
pages = {{2238--2249}},
title = {{{Generating, Benchmarking and Simulating Production Schedules – From Formalisation to Real Problems}}},
year = {{2009}},
}
@inproceedings{4707,
author = {{Jasperneite, Jürgen}},
booktitle = {{Juliane Benra, Wolfgang A. Halang (Hrsg.): Software-Entwicklung für Echtzeitsysteme}},
publisher = {{Springer-Verlag}},
title = {{{Echtzeitkommunikation (Kap. 5)}}},
year = {{2009}},
}
@inproceedings{4708,
author = {{Jasperneite, Jürgen}},
booktitle = {{ZVEI AK Drehgeber, Frankfurt (Vortrag)}},
title = {{{Echtzeit-Ethernet: Aktueller Stand und Ausblick }}},
year = {{2009}},
}
@inproceedings{4709,
author = {{Jasperneite, Jürgen}},
publisher = {{1. Mittelstandskongress Automation Robotic zum Auftakt der FMB 2009, Bad Salzuflen (Vortrag)}},
title = {{{Unterstützung der Wandlungsfähigkeit von Maschinen durch Automatisierungstechnik}}},
year = {{2009}},
}
@inproceedings{4710,
author = {{Tabassam, Ahmad Ali and Trsek, Henning and Heiss, Stefan and Jasperneite, Jürgen}},
booktitle = {{5th IEEE International Workshop on Performance and Management of Wireless and Mobile Networks (P2MNET)}},
title = {{{Fast and Seamless Handover for Secure Mobile Industrial Applications with 802.11r}}},
year = {{2009}},
}
@inproceedings{4711,
author = {{Schriegel, Sebastian and Trsek, Henning and Jasperneite, Jürgen}},
booktitle = {{2009 International IEEE Symposium on Precision Clock Synchronization for Measurement, Control and Communication}},
title = {{{Enhancement for a Clock Synchronization Protocol in Heterogeneous Networks}}},
year = {{2009}},
}
@inproceedings{4712,
author = {{Jasperneite, Jürgen and Weber, Karl}},
booktitle = {{9. Magdeburger Maschinenbau-Tagen "Forschung in Bewegung"}},
title = {{{Echtzeit-Ethernet für den Einsatz im Maschinenbau}}},
year = {{2009}},
}
@inproceedings{4713,
author = {{Trsek, Henning and Faltinski, Sebastian and Jasperneite, Jürgen and Dominguez, Ivan}},
booktitle = {{11. Wireless Technologies Kongress 2009}},
title = {{{IEEE 802.11n für die industrielle Automatisierung – Welche Vorteile bringt der neue WLAN Standard?}}},
year = {{2009}},
}
@inproceedings{4714,
author = {{Imtiaz, Jahanzaib and Jasperneite, Jürgen and Han, Lixue}},
booktitle = {{14th IEEE International Conference on Emerging Techonologies and Factory Automation (ETFA 2009)}},
title = {{{A Performance Study of Ethernet Audio Video Bridging (AVB) for Industrial Real-time Communication}}},
year = {{2009}},
}
@inproceedings{4715,
author = {{Kumar, Barath and Niggemann, Oliver and Jasperneite, Jürgen}},
booktitle = {{Machine Learning in Real-Time Applications (MLRTA 09) (in conjunction with 32nd Annual Conference on Artificial Intelligence (KI 2009))}},
title = {{{Timed Automata for Modeling Network Traffic}}},
year = {{2009}},
}
@inproceedings{4716,
author = {{Sauter, Thilo and Jasperneite, Jürgen and Lo Bello, Lucia}},
booktitle = {{14th IEEE International Conference on Emerging Techonologies and Factory Automation (ETFA 2009)}},
title = {{{Towards New Hybrid Networks for Industrial Automation}}},
year = {{2009}},
}
@inbook{4717,
author = {{Jasperneite, Jürgen}},
booktitle = {{Maschinenbau- und Metallbearbeitung Deutschland}},
publisher = {{Kuhn-Fachverlag}},
title = {{{IT-Sicherheit in der Automatisierungstechnik}}},
year = {{2009}},
}
@inproceedings{4718,
author = {{Jasperneite, Jürgen}},
title = {{{Dynamic Frame Packing Verfahren für PROFINET IRT}}},
year = {{2009}},
}
@inproceedings{4719,
author = {{Schumacher, Markus and Jasperneite, Jürgen and Weber, Karl}},
booktitle = {{VDI Kongress AUTOMATION 2009}},
title = {{{Optimierte Datenübertragung für Echtzeit-Ethernet }}},
year = {{2009}},
}
@inproceedings{4720,
author = {{Wisniewski, Lukasz and Hameed, Mohsin and Schriegel, Sebastian and Jasperneite, Jürgen}},
booktitle = {{8th International Conference on Fieldbuses networks in Industrial Embedded Systems (FET'2009)}},
pages = {{163 -- 170}},
title = {{{A Survey of Ethernet Redundancy Methods for Real-Time Ethernet Networks and its Possible Improvements}}},
year = {{2009}},
}
@inproceedings{4721,
author = {{Jasperneite, Jürgen}},
title = {{{IT in der Automatisierungstechnik}}},
year = {{2009}},
}
@article{4722,
author = {{Jasperneite, Jürgen and Imtiaz, Jahanzaib and Schumacher, Markus and Weber, Karl}},
journal = {{IEEE Transactions on Industrial Informatics}},
number = {{2}},
pages = {{75--85}},
title = {{{A Proposal for a Generic Real-time Ethernet System}}},
volume = {{5}},
year = {{2009}},
}
@inproceedings{4723,
author = {{Jasperneite, Jürgen}},
booktitle = {{Vortrag AiF/IHK: Forschungskooperationen - Strategische Allianzen für Innovationen}},
title = {{{Echtzeit Ethernet - von der Forschung zum weltweiten Standard}}},
year = {{2009}},
}
@article{4724,
author = {{Jasperneite, Jürgen and Schumacher, Markus}},
issn = {{1869-2087}},
journal = {{Lemgoer Schriftenreihe zur industriellen Informationstechnik = Lemgo series on industrial information technology}},
publisher = {{inIT}},
title = {{{ESANA: Echtzeit-Ethernet für die Sensor/Aktorvernetzung : BMBF-Abschlussbericht}}},
volume = {{1}},
year = {{2009}},
}
@misc{8174,
author = {{Meinzinger, Franziska and Oldenburg, Martin}},
booktitle = {{Water Science & Technology }},
pages = {{1785--1790}},
publisher = {{IWA}},
title = {{{Characteristics of source-separated household wastewater flows: a statistical assessment}}},
volume = {{58}},
year = {{2009}},
}
@misc{8273,
author = {{Meier, Uwe and Rauchhaupt, L.}},
booktitle = {{VDI Kongress AUTOMATION 2009, Baden-Baden, Juni 2009}},
publisher = {{VDI Verlag GmbH}},
title = {{{Messverfahren zur Bewertung von Funklösungen aus Sicht der industriellen Automation}}},
year = {{2009}},
}
@misc{8274,
abstract = {{The need for multiple radio systems in overlapping regions of a factory plant introduces a coexistence problem. The current research challenge is to design and realize radio systems that should be able to achieve a desired quality of service (QoS) in this coexisting environment. Currently transmission resources of hyperspace are not properly exploited. The cognitive radio (CR), which can adapt to the environmental changes by reconfiguring itself, can be used to implement intelligent radio systems to exploit the orthogonal nature of multiple dimensions of hyperspace to maintain the desired QoS in coexisting factory environments. We present initial results of a coexistence optimized CR which can exploit frequency and power, which are two of several dimensions of hyperspace, to improve its QoS in coexisting environments.}},
author = {{Ahmad, Kaleem and Meier, Uwe and Pape, Andreas and Kwasnicka, Halina and Griese, Bjoern}},
booktitle = {{ 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops}},
isbn = {{978-1-4244-3938-6}},
keywords = {{Cognitive radio, Quality of service, Space technology, Frequency, Production facilities, Chromium, Manufacturing automation, Intelligent systems, Polarization, Testing}},
location = {{Rome, Italy }},
publisher = {{IEEE }},
title = {{{A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems}}},
doi = {{10.1109/SAHCNW.2009.5172916}},
year = {{2009}},
}
@misc{8275,
abstract = {{The need for multiple radio systems in overlapping regions of a factory floor introduces a coexistence problem. The current research challenge is to design and realize radio systems that should be able to achieve a desired quality of service (QoS) in harsh, time-varying, coexisting industrial environments. As a solution cognitive radio (CR) built on top of a reconfigurable platform like software defined radio (SDR) can provide the required system properties. We provide a literature survey about existing coexistence problems and solutions and implement a CR testbed for experimental investigations. It can exploit three dimensions of the hyperspace, which are frequency, time, and transmission power. This CR testbed is investigated in the coexistence of typical radio systems. The experimental results show satisfactory robustness against any of these interferers.}},
author = {{Ahmad, Kaleem and Meier, Uwe and Kwasnicka, Halina and Pape, Andreas and Griese, Bjoern}},
booktitle = {{14th IEEE Conference on Emerging Technologies and Factory Automation - ETFA 2009, Mallorca, Spain}},
location = {{Palma de Mallorca, Spain }},
publisher = {{2009 IEEE Conference on Emerging Technologies & Factory Automation}},
title = {{{A Cognitive Radio Approach to Realize Coexistence Optimized Wireless Automation Systems}}},
doi = {{10.1109/ETFA.2009.5347040}},
year = {{2009}},
}
@misc{8276,
author = {{Ahmad, K. and Meier, Uwe and Kwasnicka, H.}},
booktitle = {{13th IEEE International Multitopic Conference 2009 - INMIC 2009, Islamabad, Pakistan}},
publisher = {{IEEE International Multitopic Conference 2009 - INMIC}},
title = {{{Dynamic Spectrum Access: Cyclic Transmission Exploitation Using Cognitive Radio for Coexistence Optimized Wireless Automation Systems}}},
year = {{2009}},
}
@misc{8312,
author = {{Block, Dimitri}},
publisher = {{Technische Hochschule OWL}},
title = {{{Hardware-Software-Co-Design für den Diffie-Hellman-Algorithmus}}},
year = {{2009}},
}
@misc{8560,
author = {{Köhler, Martin}},
location = {{Bad Oeynhausen}},
publisher = {{Kerawil Tonwerk Wilhelmshöhe, Löhne}},
title = {{{Fuge und Bettung - Kriterien zur Auswahl geeigneter Gesteinskörnungen für den Pflasterbau}}},
year = {{2009}},
}
@inbook{8972,
author = {{Baetge, Jörg and Niemeyer, Kai and Kümmel, Jens and Schulz, Roland}},
booktitle = {{Praxishandbuch der Unternehmensbewertung}},
editor = {{Peemöller, Volker H.}},
isbn = {{978-3-482-51184-4}},
pages = {{339--477}},
publisher = {{NWB Verlag}},
title = {{{Darstellung der Discounted-Cashflow-Verfahren (DCF-Verfahren) mit Beispiel}}},
year = {{2009}},
}
@misc{9058,
author = {{Timpte, Aline }},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Thermisch –hygrische Analyse der Ausstellungsräume des Weserrenaissance – Museums im Schloss Brake Raumklimasimulation unter Verwendung des Programms TRNSYS}}},
year = {{2009}},
}
@misc{9074,
author = {{Solterbeck , Kerstin }},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Passivhäuser - Das Prinzip und die Grundlagen eines Passivhauses}}},
year = {{2009}},
}
@misc{9075,
author = {{Rommel, Eugen}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Sanierung einer Schule in Heiligenkirchen auf der Grundlage der Schulbau Richtlinie, der Energieeinsparverordnung für nicht Wohngebäude und den allgemein Geltenden Rechtsbestimmungen}}},
year = {{2009}},
}
@article{2823,
author = {{Müller, Ulrich and Triantafillaki, C. and Stegmann, I. and Wolf, A.}},
issn = {{0009-286X}},
journal = {{Chemie - Ingenieur - Technik : Verfahrenstechnik, technische Chemie, Apparatewesen, Biotechnologie}},
number = {{8}},
pages = {{1156 -- 1157}},
publisher = {{Wiley-VCH}},
title = {{{Gegenstrominjektionsverfahren zur Herstellung von Emulsionen}}},
volume = {{81}},
year = {{2009}},
}
@article{2824,
author = {{Müller, Ulrich and Lilie, Markus and Burgemeister, S. and Flaschel, E. and Friehs, K.}},
issn = {{0009-286X}},
journal = {{Chemie - Ingenieur - Technik : Verfahrenstechnik, technische Chemie, Apparatewesen, Biotechnologie}},
number = {{8}},
pages = {{1174}},
title = {{{Nachweis mechanischer Entkeimungseffekte bei der mtVDV-Entkeimung}}},
volume = {{81}},
year = {{2009}},
}
@article{2825,
author = {{Müller, Ulrich and Lilie, Markus and Zakowski, M. and Wilhelm, Patrick and Flaschel, E. and Friehs, K.}},
issn = {{0009-286X}},
journal = {{Chemie-Ingenieur-Technik}},
number = {{8}},
pages = {{1265}},
publisher = {{WILEY-VCH Verlag GmbH & Co. KGaA}},
title = {{{Nicht isotherme Modellierung der thermischen Inaktivierung in einem mtVDV-Prozess}}},
doi = {{10.1002/cite.200950333}},
volume = {{81}},
year = {{2009}},
}
@article{2826,
author = {{Müller, Ulrich and Gockel, S. and Ridder, M. and Wilhelm, Patrick}},
issn = {{0009-286X}},
journal = {{Chemie-Ingenieur-Technik}},
number = {{9}},
pages = {{1298 -- 1299}},
publisher = {{WILEY-VCH Verlag GmbH & Co. KGaA}},
title = {{{Dynamische Gefriertrocknung von Starterkulturen}}},
doi = {{10.1002/cite.200950313}},
volume = {{81}},
year = {{2009}},
}
@article{2835,
author = {{Müller, Ulrich}},
issn = {{0047-4290}},
journal = {{Lebensmitteltechnik : offizielles Organ der Gesellschaft Deutscher Lebensmitteltechnologen e.V. (GDL), des Vereins Österreichischer Lebensmittel- und Biotechnologen (VÖLB) sowie Partner im DLG-Netzwerk für Lebensmittelverarbeitung}},
number = {{12}},
pages = {{9 -- 10}},
publisher = {{LT Food-Medien-Verl.}},
title = {{{GDL-Kongress Lebensmitteltechnologie 2009 : Ein Branchen-Highlight im Lipperland}}},
year = {{2009}},
}
@article{2836,
author = {{Müller, Ulrich}},
issn = {{0047-4290 }},
journal = {{Lebensmitteltechnik : offizielles Organ der Gesellschaft Deutscher Lebensmitteltechnologen e.V. (GDL), des Vereins Österreichischer Lebensmittel- und Biotechnologen (VÖLB) sowie Partner im DLG-Netzwerk für Lebensmittelverarbeitung}},
number = {{10}},
pages = {{3}},
publisher = {{LT Food-Medien-Verl.}},
title = {{{GDL-Kongress 2009 : Lemgo bittet zum Wissenstransfer -und mehr}}},
year = {{2009}},
}
@book{2859,
editor = {{Vetter, Andreas}},
isbn = {{3000271023}},
pages = {{47}},
publisher = {{Architekten 0711}},
title = {{{Ausstellungen zur Architektur : 7 Architekten & 7 Unternehmen; 1 Ausstellungsreihe}}},
year = {{2009}},
}
@misc{2872,
abstract = {{Die Erfindung betrifft eine Vorrichtung und ein Verfahren zur Rückhaltung und Rückführung von Zellen in einem kontinuierlich oder absatzweise durchströmten Gefäß. Ferner betrifft die Erfindung ein Verfahren zur Herstellung einer Vorrichtung, mit dem Zellen in einem kontinuierlich oder absatzweise durchströmten Gefäß zurückgehalten und zurückgeführt werden können. }},
author = {{Braun, Arndt and Brod, Helmut and Frahm, Björn and Jenne, Marc and Kauling, Jörg and Kirchner, Stephan}},
pages = {{35}},
title = {{{Verfahren und Vorrichtung zur Rückhaltung und Rückführung von Zellen}}},
year = {{2009}},
}
@misc{2912,
author = {{Frahm, Björn and Brod, H. and Langer, U.}},
location = {{Frankfurt am Main, Germany}},
title = {{{Improving cell culture bioreactor performance by Dynamic Membrane Aeration (DMA)}}},
year = {{2009}},
}
@inproceedings{2943,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
location = {{Trento}},
title = {{{Configurational variations for the primal and the dual problem}}},
year = {{2009}},
}
@inproceedings{2944,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
location = {{Lisbon}},
title = {{{Configurational variations for the primal and the dual problem in elasticity with applications to goal-oriented r-adaptive mesh optimization}}},
year = {{2009}},
}
@inproceedings{2945,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
location = {{Hannover}},
title = {{{Error analysis and improvement of design sensitivity relations}}},
year = {{2009}},
}
@misc{2970,
author = {{Frahm, Björn and Brod, H. and Langer, U.}},
location = {{Dublin, Ireland}},
title = {{{Improving cell culture bioreactor performance by Dynamic Membrane Aeration (DMA)}}},
year = {{2009}},
}
@misc{2971,
author = {{Van Hecke, W. and Van Langenhovve, H. and Frahm, Björn and Brod, H. and Dewulf, J. and Haltrich, D. and Ludwig, R.}},
location = {{Krakow, Poland}},
title = {{{Upscaling the biocatalytic conversion of lactose to lactobionic acid with the dynamic membrane aeration reactor}}},
year = {{2009}},
}
@book{3039,
author = {{Austermann-Haun, Ute and Felber, H.}},
isbn = {{978-3-88721-067-0}},
publisher = {{Hirthammer}},
title = {{{Abwasser Grundkurse}}},
year = {{2009}},
}
@inproceedings{3107,
author = {{Holm, N. C. and Kujawski, O. and Rönner-Holm, S. and Austermann-Haun, Ute}},
booktitle = {{5. Frankfurter Abwassersymposium „Klär- und Biogas - Energieträger mit neutraler Treibhausbilanz?, Seminar der Technischen Akademie Hannover am 25.06.2009 in Frankfurt am Main - Tagungsband }},
location = {{Frankfurt am Main}},
pages = {{63 -- 76}},
title = {{{Mischsubstrate für die Biogaserzeugung – Bilanzierungen}}},
year = {{2009}},
}
@inproceedings{3149,
author = {{Austermann-Haun, Ute}},
location = {{Al-Balqa’-Universität in Al-Salt, Jordan}},
title = {{{Bemessungsbeispiel - Bemessung einer Belebungsanlage nach A131}}},
year = {{2009}},
}
@inproceedings{3150,
author = {{Austermann-Haun, Ute}},
location = {{Al-Balqa’-Universität in Al-Salt, Jordan}},
title = {{{Betriebsstörungen in der biologischen Abwasserreinigung – Lösungsansätze}}},
year = {{2009}},
}
@inproceedings{3151,
author = {{Austermann-Haun, Ute}},
location = {{Al-Balqa’-Universität in Al-Salt, Jordan}},
title = {{{Anforderungen an Abwasserreinigungsanlagen}}},
year = {{2009}},
}
@inproceedings{3152,
author = {{Austermann-Haun, Ute}},
location = {{Joao Pessoa, Paraiba, Brazil}},
title = {{{Constructed Wetlands}}},
year = {{2009}},
}
@inproceedings{3153,
author = {{Austermann-Haun, Ute}},
location = {{Joao Pessoa, Paraiba, Brazil}},
title = {{{Wastewater Lagoons}}},
year = {{2009}},
}
@inproceedings{3229,
author = {{Austermann-Haun, Ute}},
title = {{{Betriebsprobleme bei der Behandlung organisch belasteter Industrieabwässer und deren Lösungen}}},
year = {{2009}},
}
@inproceedings{3231,
author = {{Austermann-Haun, Ute}},
location = {{Rostock}},
title = {{{Mechanische Abwasserreinigung mit Berechnungsbeispielen}}},
year = {{2009}},
}
@inproceedings{3233,
author = {{Austermann-Haun, Ute}},
location = {{Steinhagen}},
title = {{{Metall- und Betonkorrosion in Kläranlagen}}},
year = {{2009}},
}
@inproceedings{3234,
author = {{Austermann-Haun, Ute}},
location = {{Detmold}},
title = {{{Gebäudetechnik – Abwasser – Sanierung durch Flutungsverfahren}}},
year = {{2009}},
}
@inproceedings{3235,
author = {{Austermann-Haun, Ute}},
location = {{Detmold}},
title = {{{Gebäudetechnik – Abwasser – Sanierung mittels Schlauchlining-Verfahren}}},
year = {{2009}},
}
@inproceedings{3236,
author = {{Austermann-Haun, Ute}},
location = {{Detmold}},
title = {{{Gebäudetechnik – Abwasser – Dichtheitsprüfung von Grundstücksentwässerungsanlagen}}},
year = {{2009}},
}
@inproceedings{3237,
author = {{Austermann-Haun, Ute}},
location = {{Detmold}},
title = {{{Gebäudetechnik – Trinkwasser – Auswirkungen der Novelle der Trinkwasser-verordnung auf die Hausinstallation}}},
year = {{2009}},
}
@inproceedings{3238,
author = {{Austermann-Haun, Ute}},
location = {{Lüdersen}},
title = {{{Dichtheitsnachweis privater Grundstücksentwässerungsanlagen}}},
year = {{2009}},
}
@inproceedings{3239,
author = {{Austermann-Haun, Ute}},
location = {{Suderburg}},
title = {{{Die Abwasserabgabe}}},
year = {{2009}},
}
@inproceedings{3241,
author = {{Austermann-Haun, Ute}},
location = {{Suderburg}},
title = {{{Anforderungen an das Einleiten von Abwasser aus Industriebetrieben}}},
year = {{2009}},
}
@inproceedings{3243,
author = {{Austermann-Haun, Ute}},
location = {{Suderburg}},
title = {{{Betriebsprobleme auf Kläranlagen}}},
year = {{2009}},
}
@article{3408,
author = {{Schneider, Jan}},
issn = {{0341-7115}},
journal = {{Brauindustrie }},
number = {{4}},
pages = {{14--18}},
publisher = {{Vereinigte Fachverl.}},
title = {{{Unterschiedliche Intentionen : Zur Bestimmung der Extraktausbeute im Sudhaus}}},
volume = {{94}},
year = {{2009}},
}
@inbook{3480,
author = {{Jungkind, Wilfried}},
booktitle = {{BWL-Klausurentraining}},
editor = {{Burgfeld-Schächer, Beate}},
isbn = {{978-3-8120-0650-7}},
pages = {{111 -- 126}},
publisher = {{Merkur-Verlag}},
title = {{{Produktionsmanagement}}},
volume = {{650}},
year = {{2009}},
}
@article{3537,
author = {{Schneider, Jan and Cegelski, Margret and Radowski, Anette and Dörr, Tillmann}},
issn = {{0006-9329}},
journal = {{Brauwelt}},
number = {{6}},
pages = {{134--136}},
publisher = {{Carl}},
title = {{{Kohlenhydrate in Sportgetränken Teil 1: Untersuchungen im Markt befindlicher Sportgetränke}}},
year = {{2009}},
}
@article{3538,
author = {{Schneider, Jan and Cegelski, Margret and Radowski, Anette and Dörr, Tillmann}},
issn = {{0006-9329}},
journal = {{Brauwelt}},
number = {{7}},
pages = {{176--180}},
publisher = {{Carl}},
title = {{{Kohlenhydrate in Sportgetränken, Teil 2: Sensorische Eigenschaften und Osmolalitätsstabilität}}},
year = {{2009}},
}
@article{3581,
author = {{Riedl, Ulrich and Taeger, Stefan}},
journal = {{Natur und Landschaft }},
number = {{8}},
pages = {{145 -- 152}},
title = {{{GIS-basierte Habitatmodelle für das Biosphärenreservat Spreewald}}},
volume = {{84}},
year = {{2009}},
}
@proceedings{3649,
editor = {{Song, Jian}},
isbn = {{978-3-00-027217-2}},
location = {{Lemgo}},
pages = {{234}},
publisher = {{Labor für Feinsystemtechnik, Hochsch. Ostwestfalen-Lippe}},
title = {{{Elektronische und optische Verbindungstechnik 2009 : Tagungsband der GMM-Fachtagung ; [zugleich die 13. Fachtagung "Optische und Elektronische Verbindungstechnik" und das 2. Symposium Connectors]}}},
year = {{2009}},
}
@inproceedings{3658,
author = {{Song, Jian and Schmidt, Helge}},
booktitle = {{2009 Proceedings of the 55th IEEE Holm Conference on Electrical Contacts}},
isbn = {{978-1-4244-3612-5}},
location = {{Vancouver, British Columbia, Canada}},
pages = {{331 -- 338}},
title = {{{Electrical Resistance of Connectors with Different Contact Finishes under Low Level Conditions}}},
volume = {{55}},
year = {{2009}},
}
@misc{3751,
author = {{Austermann-Haun, Ute and Majcan, Mirko and Witte, H.}},
publisher = {{Ministeriums für Umwelt und Naturschutz, Landwirtschaft und Verbraucherschutz des Landes Nordrhein-Westfalen}},
title = {{{Unterstützung der Unteren Wasserbehörden bei der Erfassung und Integration von Daten in D-E-A (Indirekteinleiter und Kleinkläranlagen)}}},
year = {{2009}},
}
@misc{3752,
author = {{Austermann-Haun, Ute and Majcan, Mirko}},
publisher = {{Ministerium für Umwelt und Naturschutz, Landwirtschaft und Verbraucherschutz des Landes Nordrhein-Westfalen}},
title = {{{Ergänzende Arbeiten zum Vorhaben „Niederschlagswassereinleitungen in Gewässer – Erarbeitung eines Datenmodells“}}},
year = {{2009}},
}
@article{3826,
author = {{Riegel, Adrian and Hoffmeister, Hans-Werner and Horstmann, Sebastian and Strauss, Henning}},
issn = {{0018-3822}},
journal = {{Die Holzbearbeitung : HOB ; fertigungstechnische Fachzeitschrift für die Holzbearbeitung}},
number = {{1/2}},
pages = {{67 -- 69}},
publisher = {{A.G.T.-Verlag}},
title = {{{CAM Ummanteln. Automatisiertes Off-Line-Rüsten (Teil 2)}}},
volume = {{57}},
year = {{2009}},
}
@article{3838,
author = {{Riegel, Adrian and Hoffmeister, Hans-Werner and Horstmann, Sebastian and Strauss, Henning}},
issn = {{0018-3768}},
journal = {{Die Holzbearbeitung}},
number = {{12}},
pages = {{72 -- 75}},
publisher = {{A.G.T.-Verlag}},
title = {{{CAM Ummanteln (Teil 1)}}},
volume = {{56}},
year = {{2009}},
}
@article{3840,
author = {{Riegel, Adrian and Kortüm, Christian}},
issn = {{0018-3822}},
journal = {{Die Holzbearbeitung}},
number = {{7/8}},
pages = {{49 -- 51}},
publisher = {{A.G.T.-Verlag}},
title = {{{Ein Gefühl für Oberflächen. Sensorische Prüfverfahren zur Gütebestimmung von Holzoberflächen (Teil 1)}}},
volume = {{56}},
year = {{2009}},
}
@article{3843,
author = {{Riegel, Adrian and Kortüm, Christian}},
issn = {{0018-3822}},
journal = {{Die Holzbearbeitung}},
number = {{9}},
pages = {{73 -- 75}},
publisher = {{A.G.T.-Verlag}},
title = {{{Ein Gefühl für Oberflächen. Sensorische Prüfverfahren zur Gütebestimmung von Holzoberflächen (Teil 2)}}},
volume = {{56}},
year = {{2009}},
}
@article{3845,
author = {{Riegel, Adrian and Diedrich, Stefan}},
issn = {{0018-3792}},
journal = {{Holz-Zentralblatt}},
number = {{29}},
pages = {{769 -- 770}},
publisher = {{Holz-Zentralblatt-Verl.}},
title = {{{Kantenschartigkeitsmessung mit Laservorhang : Noch ist die ideale Lösung für die Qualitätsüberwachung des Fräsens von KF-Spanplatte nicht gefunden}}},
volume = {{135}},
year = {{2009}},
}
@inproceedings{5597,
author = {{Tabassam, Ahmad Ali and Trsek, Henning and Heiss, Stefan and Jasperneite, Jurgen}},
booktitle = {{2009 IEEE 34th Conference on Local Computer Networks}},
isbn = {{9781424444885}},
title = {{{Fast and seamless handover for secure mobile industrial applications with 802.11r}}},
doi = {{10.1109/lcn.2009.5355069}},
year = {{2009}},
}
@inproceedings{5613,
author = {{Hausmann, Stefan and Heiss, Stefan}},
title = {{{VPN-Implementierungen auf Endgeräten der Automatisierungstechnik.}}},
year = {{2009}},
}
@inproceedings{5701,
author = {{Minge, Michael and Hannighofer, Jasmin}},
booktitle = {{ Der Mensch im Mittelpunkt technischer Systeme. 8}},
editor = {{Lichtenstein, Antje and Stößel, Christian and Clemens, Caroline}},
pages = {{200--204}},
publisher = {{Düsseldorf: VDI}},
title = {{{Der Beginn einer langen Freundschaft? Eine Längsschnittstudie zum Nutzungserleben}}},
year = {{2009}},
}
@inproceedings{5702,
author = {{Brandenburg, Stefan and Drewitz, Uwe and Minge, Michael and Thüring, Manfred and Brune, Thomas}},
booktitle = {{Der Mensch im Mittelpunkt technischer Systeme. 8.}},
editor = {{Lichtenstein, A. and Stößel, C. and Clemens, C.}},
pages = {{248--252}},
publisher = {{Düsseldorf: VDI}},
title = {{{Touch Me, If You Can – Immediate Interactive Behavior als Bedienkonzept für Multimediageräte}}},
year = {{2009}},
}
@inproceedings{5703,
abstract = {{Eine möglichst positive User Experience bei der Nutzung eines interaktiven Produkts gilt immer mehr als wichtiges Qualitätskriterium. Aus theoretischer Sicht besteht im Grunde Einigkeit darüber, dass sich User Experience auf die subjektive Perspektive des Nutzers auf die Interaktion mit einem Produkt oder Service bezieht und dabei neben der Usability auch noch weitere Aspekte wie Joy of Use, weitere Emotionen, Hedonische Qualitäten oder Ästhetik eine Rolle spielen. Daneben wurde eine Reihe von Methoden entwickelt, die diese neuen Komponenten erfassbar machen. Ideen werden diskutiert wie interaktive Produkte gestaltet werden können, um ein positiveres Nutzererleben zu erreichen. Offen ist, welche dieser theoretischen, methodischen und konzeptio-nellen Überlegungen ihren Weg in den Projektalltag der nutzerzentrierten Produktentwicklung gefunden haben, wie sich Ziele und Vorgehensweisen der nutzerzentrierten Gestaltung verändert haben und welche Entwicklungen in Zukunft zu erwarten sind.}},
author = {{Mahlke, Sascha and Weber, Katharina and Pohlmeyer, Anna Elisabeth and Minge, Michael}},
booktitle = {{Usability Professionals 2009}},
editor = {{Brau, Henning and Diefenbach, Sarah and Hassenzahl, Marc and Kohler, Kirstin and Koller, Fanz and Peissner, Matthias and Petrovic, Konstanjia and Thielsch, Meinald and Ullrich, Daniel and Zimmermann, Dirk}},
isbn = {{978-3-8396-0043-6 }},
location = {{Berlin}},
pages = {{138--140}},
publisher = {{Fraunhofer}},
title = {{{Wie wird User Experience in der Praxis gemessen und gestaltet?}}},
year = {{2009}},
}
@inproceedings{5704,
author = {{Mahlke, Sascha and Weber, Katharina and Pohlmeyer, Anna Elisabeth and Minge, Michael}},
editor = {{Brau, Henning and Diefenbach, Sarah and Hassenzahl, Marc and Kohler, Kirstin and Koller, Fanz and Peissner, Matthias and Petrovic, Konstanjia and Thielsch, Meinald and Ullrich, Daniel and Zimmermann, Dirk}},
pages = {{138--140}},
publisher = {{Fraunhofer}},
title = {{{Wie wird User Experience in der Praxis gemessen und gestaltet?}}},
year = {{2009}},
}
@misc{5839,
author = {{Hall, Oliver and Schneider, Enno}},
publisher = {{Fachhochschule Lippe und Höxter }},
title = {{{Zukunft der (historischen) Stadtkerne von Mittelzentren. Forschungsvorbericht}}},
year = {{2009}},
}
@book{5917,
abstract = {{Aktuell häufen sich die Meldungen über einbrechende Absatzzahlen für Neufahrzeuge im Automobilsektor. 1 Die instabile weltwirtschaftliehe Lage und die daraus resultierenden Zukunftssorgen führen zu einer Kaufzurückhaltung bei sehr hochwertigen Gebrauchsgütern wie z. B. Automobilen. 2 Die sinkenden Absatzzahlen für Neufahrzeuge belasten die Automobilzulieferindustrie erheblich.}},
author = {{Boone, Nicholas and Quisbrock, Tim}},
isbn = {{978-3-941645-01-1}},
pages = {{35}},
publisher = {{HS-OWL}},
title = {{{Logistische Hochleistungsanforderungen an Zulieferunternehmen bei der Ersatzteildistribution im unabhängigen Automotive-Aftermarket in Deutschland}}},
volume = {{1}},
year = {{2009}},
}
@book{5923,
abstract = {{Ziel dieser Arbeit ist es darzustellen, welche Besonderheiten bei der Erstellung einer Haus-, Bachelor- oder Masterarbeit zu beachten sind.}},
author = {{Boone, Nicholas and Quisbrock, Tim}},
isbn = {{978-3-941645-05-9}},
pages = {{32}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Arbeite lieber wissenschaftlich! : Haus-, Bachelor- und Masterarbeiten erst strukturieren, dann schreiben}}},
volume = {{5}},
year = {{2009}},
}
@book{5927,
author = {{Quisbrock, Tim}},
isbn = {{978-3-941645-02-8}},
pages = {{49}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Steuerungsprobleme in Kommissioniersystemen mit dynamischer Bereitstellung : Ein Beitrag zur Entwicklung automatischer Steuerungskonzepte am Beispiel einer Hochregallager- Kommisionierung mit Sortereinsatz}}},
volume = {{4}},
year = {{2009}},
}
@inbook{5960,
author = {{Nether, Ulrich}},
booktitle = {{Szenografie in Ausstellungen und Museen Teil: 4., Raum und Körper - Körperraum; Kreativität und Raumschöpfung }},
pages = {{10--17}},
publisher = {{Klartext}},
title = {{{Raum und Wahrnehmung : Das PerceptionLAb der Hochschule Ostwestfalen-Lippe}}},
year = {{2009}},
}
@inbook{5961,
author = {{Nether, Ulrich}},
booktitle = {{Szenografie in Ausstellungen und Museen Teil: 4., Raum und Körper - Körperraum; Kreativität und Raumschöpfung }},
pages = {{246--247}},
publisher = {{Klartext}},
title = {{{Gedanken zu Raumschöpfung und Kreativität }}},
year = {{2009}},
}
@inbook{5962,
author = {{Nether, Ulrich}},
booktitle = {{Forschungsschwerpunkt PerceptionLab}},
editor = {{Nether, Ulrich and Pottgiesser, Uta and König, Katharina}},
pages = {{5--8}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Wahrnehmung}}},
year = {{2009}},
}
@inbook{5963,
author = {{Nether, Ulrich and Pottgiesser, Uta and Pröls, Christoph and König, Katharina}},
booktitle = {{Forschungsschwerpunkt PerceptionLab}},
editor = {{Nether, Ulrich and Pottgiesser, Uta and König, Katharina}},
pages = {{111--123}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Architekturwahrnehmung}}},
year = {{2009}},
}
@inbook{5965,
author = {{Nether, Ulrich and Filter, Eva-Maria and Hemmerling, Marco}},
booktitle = {{Forschungsschwerpunkt PerceptionLab}},
editor = {{Nether, Ulrich and Pottgiesser, Uta and König, Katharina}},
pages = {{147--154}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Atmosphäre- Werkzeugkasten}}},
year = {{2009}},
}
@article{5966,
author = {{Nether, Ulrich and Gräßer, Hsrald W. and König, Katharina}},
issn = {{1437-1065 }},
journal = {{MedAmbiente : care ; Einrichtungskonzepte, Gestaltungstrends & Moderne Dienstleistungen}},
number = {{3}},
pages = {{32--33}},
publisher = {{Wiley}},
title = {{{Wahrnehmung im Raum: Leit- und Orientierungssystem für ein Krankenhaus}}},
volume = {{12}},
year = {{2009}},
}
@inproceedings{6122,
author = {{Müller, Ulrich and Triantafillaki, C. and Schneider, P. and Jordan, V.}},
location = {{Oberhausen}},
title = {{{Trennung komplexer Stoffgemische mit Mesophasensystemen}}},
year = {{2009}},
}
@inproceedings{6123,
author = {{Zakowski, M. and Schisnowski, D. and Bogdon, S. and Lilie, M. and Wilhelm, Patrick and Flaschel, E. and Friehs, K. and Müller, Ulrich}},
location = {{Lausanne}},
title = {{{Nicht-Isotherme Modellierung der thermischen Inaktivierung von Bacillus-Sporen}}},
year = {{2009}},
}
@inproceedings{6124,
author = {{Pilske, R. and Ukar, F. and Wang, J. and Triantafillaki, C. and Müller, Ulrich and Jordan, V.}},
location = {{Lausanne}},
title = {{{Bestimmung von Stoffübergangskoeffizienten bei der Phytostoffextraktion mittels Mesophasen}}},
year = {{2009}},
}
@inproceedings{6126,
author = {{Lilie, M. and Burgemeister, S. and Flaschel, E. and Friehs, K. and Müller, Ulrich}},
location = {{Lausanne}},
title = {{{Einsatz der Bildanalyse zum Nachweis mechanischer Entkeimungseffekte}}},
year = {{2009}},
}
@inproceedings{6127,
author = {{Triantafillaki, C. and Wilhelm, Patrick and Müller, Ulrich}},
location = {{Lausanne}},
title = {{{Gegenstrominjektionsverfahren zur Herstellung von Emulsionen}}},
year = {{2009}},
}
@inproceedings{6128,
author = {{Schwarzer, Knut and Becker, Barbara and Schneider, Jan and Müller, Ulrich}},
location = {{Lausanne}},
title = {{{Die Lemgo D- and z-value Datebase for Food (LDzBase): Ein Werkzeug zur Einführung von minimal processing in der Entkeimung}}},
year = {{2009}},
}
@inproceedings{6129,
author = {{Müller, Ulrich}},
location = {{Detmold}},
title = {{{Gewürze ohne Keime – Pro Inno am Beispiel eines Entkeimungsprojektes}}},
year = {{2009}},
}
@inproceedings{6130,
author = {{Krüger, H. and Lange, H. and Müller, Ulrich and Lilie, M.}},
location = {{Savigliano}},
title = {{{Changes in the composition of fennel and marjoram essential oils influenced by steam vacuum decontamination}}},
year = {{2009}},
}
@inproceedings{6131,
author = {{Müller, Ulrich}},
location = {{Bönen}},
title = {{{Mechanische Sattdampf-Entkeimung von pflanzlichen Materialien – ein Beispiel für die Kooperation von Mittelstand und Hochschule}}},
year = {{2009}},
}
@inproceedings{6132,
author = {{Müller, Ulrich and Triantafillaki, C. and Stegemann, I. and Wolf, A.}},
location = {{Mannheim}},
title = {{{Dynamische Gefriertrocknung von Starterkulturen}}},
year = {{2009}},
}
@inproceedings{6133,
author = {{Müller, Ulrich and Triantafillaki, C. and Stegemann, I. and Wolf, A.}},
location = {{Lemgo}},
title = {{{ProcessNet-Jahrestagung }}},
year = {{2009}},
}
@inproceedings{6135,
author = {{Müller, Ulrich and Triantafillaki, C. and Stegemann, I. and Wolf, A.}},
location = {{Lemgo}},
title = {{{Gegenstrominjektionsverfahren zur Herstellung von Emulsionen}}},
year = {{2009}},
}
@inproceedings{6136,
author = {{Lilie, M. and Burgemeister, S. and Flaschel, E. and Friehs, K. and Müller, Ulrich}},
location = {{Mannheim}},
title = {{{Nachweis mechanischer Entkeimungseffekte bei der mtVDV-Entkeimung}}},
year = {{2009}},
}
@inproceedings{6137,
author = {{Lilie, M. and Burgemeister, S. and Flaschel, E. and Friehs, K. and Müller, Ulrich}},
location = {{Lemgo}},
title = {{{ProcessNet- Jahrestagung}}},
year = {{2009}},
}
@inproceedings{6139,
author = {{Lilie, M. and Zakowski, M. and Schisnowski, D. and Bogdon, S. and Flaschel, E. and Friehs, K. and Müller, Ulrich}},
location = {{Mannheim}},
title = {{{Nicht-Isotherme Modellierung der thermischen Inaktivierung in einem mtVDV-Prozess}}},
year = {{2009}},
}
@inproceedings{6140,
author = {{Lilie, M. and Zakowski, M. and Schisnowski, D. and Bogdon, S. and Flaschel, E. and Friehs, K. and Müller, Ulrich}},
location = {{Lemgo}},
title = {{{Nicht-Isotherme Modellierung der thermischen Inaktivierung in einem mtVDV-Prozess}}},
year = {{2009}},
}
@inproceedings{6141,
author = {{Schwarzer, Knut and Becker, Barbara and Schneider, Jan and Müller, Ulrich}},
location = {{Lemgo}},
title = {{{Die Lemgo D- and z-value Datebase for Food (LDzBase): Ein Werkzeug zur Einführung von minimal processing in der Entkeimung}}},
year = {{2009}},
}
@inproceedings{6142,
author = {{Müller, Ulrich}},
location = {{Lemgo}},
title = {{{Mechano-thermische Entkeimungsverfahren von pflanzlichen Materialien}}},
year = {{2009}},
}
@book{6214,
author = {{Song, Jian}},
editor = {{Song, Jian}},
isbn = {{978-3-00-027217-2}},
title = {{{Elektronische und optische Verbindungstechnik 2009}}},
year = {{2009}},
}
@book{6219,
editor = {{Glenz, W. and Song, Jian}},
publisher = {{Hanser-Verlag}},
title = {{{A Glossary of Plastics Terminology}}},
year = {{2009}},
}
@inproceedings{6276,
author = {{Song, Jian and Koch, C.}},
booktitle = {{Tagungsband des VDE/VDI-GMM- Fachtagung „Symposium Connectors”}},
location = {{2009}},
title = {{{Verschleißarten und Lebensdauer von elektrischen Kontakten}}},
year = {{2009}},
}
@inproceedings{6277,
author = {{Song, Jian and Sawitzki, F.}},
booktitle = {{Tagungsband des VDE/VDI-GMM- Fachtagung „Symposium Connectors”}},
location = {{Lemgo}},
title = {{{Einflussparameter von Reibkorrosionsuntersuchungen}}},
year = {{2009}},
}
@inproceedings{6278,
author = {{Song, Jian and Schmidt, H. and Koch, C. and Yang, X.}},
booktitle = {{Tagungsband des VDE/VDI-GMM- Fachtagung „Symposium Connectors”}},
location = {{2009}},
title = {{{Messmethoden und Verhalten von ausgewählten Kontakten im Hinblick auf kleine Spannungen und Ströme}}},
year = {{2009}},
}
@misc{10155,
abstract = {{This paper describes a method for automatically obtaining the order and position of contactless connected network participants in a linear physical topology. While the sequence of network devices can be determined with quite simple methods in networks with physical interconnections, these methods can not be applied in contactless networks. This work is based on a linear network topology using a backbone rail, which includes mechanisms for contactless energy and data transmission. The position estimation for each attached network device can be performed by determining a specific physical characteristic, which is altered along the rail extension. The proposed solution uses a capacitive resonant circuit to achieve a position detection.}},
author = {{Wesemann, Derk and Witte, Stefan and Michels, Jan-Stefan}},
booktitle = {{2009 International Conference on Electrical and Electronics Engineering - ELECO 2009}},
isbn = {{978-9944-89-818-8}},
keywords = {{network topology, position measurement, voltage measurement, wireless sensor networks}},
location = {{Bursa, Turkey }},
publisher = {{IEEE}},
title = {{{Position Detection in linear, proximity coupling Networks}}},
doi = {{10.1109/ELECO.2009.5355273}},
year = {{2009}},
}
@misc{10156,
abstract = {{This paper describes an approach for a contactless, inductively coupled resonant energy supply system for multiple, independent endpoints. Typical contactless inductive energy supplies in industrial applications involve a combination of one primary inverter/coil and one secondary coil with a rectifier and a load. The work presented in this paper issues a one-to-many-approach instead, which can be used for creating a contactless automation network, having multiple secondary side loads driven by only one primary coil. The challenge is to run such a system in resonance, as every participant potentially affects the resonant frequency, and therefore the overall system efficiency. The effects of multiple participants on the resonant frequency are modeled, and the theoretical examinations are backed up by measurements run on a rail-based test system.}},
author = {{Wesemann, Derk and Michels, Jan-Stefan and Witte, Stefan}},
booktitle = {{2009 International Conference on Electrical and Electronics Engineering - ELECO 2009}},
isbn = {{978-9944-89-818-8 }},
keywords = {{coils, load flow, rails, rectifiers}},
location = {{ Bursa, Turkey}},
publisher = {{IEEE}},
title = {{{Effects of multiple loads in a contactless, inductively coupled linear power transfer system}}},
doi = {{10.1109/ELECO.2009.5355275}},
year = {{2009}},
}
@inbook{500,
abstract = {{Ein mehrstufiges Vorgehensmodell zur Bildung von Fachplanungsteams in der internationalen Fabrikplanungsbranche ist Inhalt dieses Beitrags. Das Vorgehensmodell berücksichtigt projektspezifische Anforderungen an die fachliche Expertise von Projektleitern und Teammitgliedern. Darüber hinaus werden weitere Kompetenzen sowie die Einflüsse der Internationalisierung auf die Teams berücksichtigt.}},
author = {{Jeske, Tim and Hinrichsen, Sven and Tackenberg, Sven and Schlick, Christopher M.}},
booktitle = {{Industrielle Dienstleistungen und Internationalisierung : one-stop services als erfolgreiches Konzept }},
editor = {{Schenk, Michael and Schlick, Christopher M.}},
isbn = {{978-3-8349-1359-3}},
keywords = {{Fabrikplanung}},
pages = {{211--217}},
publisher = {{Gabler}},
title = {{{Vorgehensmodell zur Bildung von Fachplanungsteams}}},
year = {{2009}},
}
@inbook{501,
abstract = {{In der Literatur finden sich nur wenige wissenschaftliche Studien über die Belastung und Beanspruchung von Arbeitspersonen in Planungsprojekten. Beispielsweise haben Mintzberg und Schreyögg die Tätigkeit von Managern untersucht. Für den vorliegenden Untersuchungsgegenstand – die Planung komplexer Fabrikplanungsprojekte – fehlen empirische Daten vollständig. Die im Rahmen des Forschungsvorhabens angestrebte Analyse der Belastung von Arbeitspersonen in internationalen Fabrikplanungsprojekten erforderte daher die Konzeption, sowie Planung und Durchführung einer empirischen Studie. Zu diesem Zweck wurden zunächst Interviews mit zwölf Personen aus dem Bereich der Geschäftsführung, sowie der Abteilungs-und Projektleiter durchgeführt. Die einzelnen Befragungen, die jeweils ca. 60-90 Minuten dauerten, wurden mit Hilfe eines Leitfadens geführt, der überwiegend offene Fragen enthielt. Die Befragungsergebnisse wurden mit den Befragten im Rahmen eines Survey-Feedback Workshops diskutiert und überprüft.}},
author = {{Beuscher-Mackay, Sabine and Jeske, Tim and Steiger, Peter and Hinrichsen, Sven and Schlick, Christopher M.}},
booktitle = {{Industrielle Dienstleistungen und Internationalisierung: One-Stop Services als erfolgreiches Konzept}},
editor = {{Schenk, Michael and Schlick, Christopher M.}},
isbn = {{978-3-8349-1359-3}},
pages = {{219--265}},
publisher = {{Gabler}},
title = {{{Tätigkeitsanalyse und Personalentwicklungskonzepte}}},
year = {{2009}},
}
@inbook{502,
abstract = {{Der Beitrag gibt zunächst einen Überblick über Aufgaben und Organisation der Fabrikplanung als industrieller Dienstleistung. Vor dem Hintergrund der aktuellen Marktsituation werden Anforderungen an die Erbringer der Fabrikplanungsdienstleitung abgeleitet. Darauf aufbauend wird eine Methode vorgestellt, die es ermöglicht, Arbeitsausführungszeiten in Projekten zu prognostizieren. Die Prognose kann differenziert nach unterschiedlichen Personengruppen und Projektphasen erfolgen und basiert auf einer regressionsanalytischen Analyse von Daten aus bereits abgeschlossenen Projekten. Die Methode wurde in der internationalen Fabrikplanungsbranche erprobt, ist jedoch nicht branchenspezifisch. Ein weiterer Bestandteil ist ein mehrstufiges Vorgehensmodell zur Bildung von Fachplanungsteams in der internationalen Fabrikplanungsbranche. Das Vorgehensmodell berücksichtigt projektspezifische Anforderungen an die fachlichen Expertise von Projektleitern und Teammitgliedern. Darüber hinaus werden weitere Kompetenzen sowie die Einflüsse der Internationalisierung auf die Teams berücksichtigt. Schließlich wird eine Analyse der Tätigkeit von Projektleitern in internationalen Fabrikplanungsprojekten vorgestellt. Die Analyse gibt detailliert Aufschluss über die Art, Dauer und Verteilung der Aktivitäten von Projektleitern. Die Ergebnisse sind statistisch ausgewertet und in ihrem jeweiligen spezifischen Zusammenhang interpretiert. Auf den Ergebnissen der Tätigkeitsanalyse aufbauend werden Personalentwicklungskonzepte erstellt. Ziel dieser Konzepte ist eine mitarbeiterorientierte Arbeitsgestaltung, die einerseits eine hohe Dienstleistungsqualität und Arbeitseffizienz sicherstellt und andererseits eine Verbesserung der individuellen Belastungssituation der Projektleiter erreicht.}},
author = {{Hinrichsen, Sven and Jeske, Tim and Schlick, Christopher and Steiger, Peter}},
booktitle = {{Personal- und Organisationsentwicklung bei der Internationalisierung von industriellen Dienstleistungen }},
editor = {{Zink, Klaus}},
isbn = {{978-3-7908-2338-7}},
pages = {{133--159}},
publisher = {{Springer}},
title = {{{Personal- und Organisationsentwicklung in internationalen Fabrikplanungsprojekten}}},
year = {{2009}},
}
@book{5121,
author = {{Pottgiesser, Uta and Aengeneyndt, Christine}},
pages = {{156}},
title = {{{CREED: Climate Related Energy Efficient Development: proceedings of the International Summer School}}},
year = {{2009}},
}
@inproceedings{5122,
author = {{Pottgiesser, Uta}},
isbn = {{ 978-3-939349-09-9 }},
pages = {{ 202 Seiten }},
publisher = {{ Hochschule OWL }},
title = {{{ Facade 2009 - facade technologies. conference volume : research focus ConstructionLab }}},
year = {{2009}},
}
@book{5123,
author = {{Pottgiesser, Uta and Knaack, Ulrich and Strauß, Holger}},
title = {{{Facade2009 : new technologies: Tagungsband zum Symposium 2009}}},
year = {{2009}},
}
@inproceedings{5125,
author = {{Pottgiesser, Uta}},
booktitle = {{Structural Studies, Repairs and Maintenance of Heritage Architecture XI}},
isbn = {{9781845641962}},
title = {{{Revitalisation strategies for modern glass facades of the 20thcentury}}},
doi = {{10.2495/str090501}},
year = {{2009}},
}
@article{5147,
author = {{Pottgiesser, Uta}},
journal = {{Die Bautechnik}},
title = {{{Energie-effiziente Sanierung moderner Glasfassaden des 20. Jahrhunderts}}},
year = {{2009}},
}
@misc{12982,
abstract = {{Contaminated food is a significant vehicle for human norovirus transmission. The present study determined the effect of physicochemical treatments on the tenacity of infective human norovirus genogroup II in selected foods. Artificially contaminated produce was subjected to a number of processes used by the food industry for preservation and by the consumer for storage and preparation. Virus recovery was carried out by using ultrafiltration and was monitored by using bacteriophage MS2 as an internal process control. Norovirus was quantified by using monoplex one-step TaqMan real-time reverse transcription (RT)-PCR and an external standard curve based on recombinant RNA standards. An RNase pretreatment step was used to avoid false-positive PCR results caused by accessible RNA, which allowed detection of intact virus particles. Significant reductions in titers were obtained with heat treatments usually applied by consumers for food preparation (baking, cooking, roasting). Generally, processes used for preservation and storage, such as cooling, freezing, acidification (≥pH 4.5), and moderate heat treatments (pasteurization), appear to be insufficient to inactivate norovirus within a food matrix or on the surface of food. Besides data for persistence in processed food, comparable data for individual matrix-specific protective effects, recovery rates, and inhibitory effects on the PCRs were obtained in this study. The established procedure might be used for other noncultivable enteric RNA viruses that are connected to food-borne diseases. The data obtained in this study may also help optimize the process for inactivation of norovirus in food by adjusting food processing technologies and may promote the development of risk assessment systems in order to improve consumer protection.}},
author = {{Mormann, Sascha and Dabisch-Ruthe, Mareike and Becker, Barbara}},
booktitle = {{ Applied and environmental microbiology / American Society for Microbiology}},
issn = {{1098-5336}},
number = {{2}},
pages = {{536--545}},
publisher = {{American Society for Microbiology}},
title = {{{Effects of Technological Processes on the Tenacity and Inactivation of Norovirus Genogroup II in Experimentally Contaminated Foods}}},
doi = {{10.1128/aem.01797-09}},
volume = {{76}},
year = {{2009}},
}
@misc{1349,
author = {{Werner, Roland}},
keywords = {{Farbkorrektur, Schnitt, Audio, Video Audio, Colorgrading, Video}},
pages = {{79}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Valentins Tag - Postproduktion eines Kurzfilms}}},
year = {{2009}},
}
@misc{1351,
author = {{Jensen, Judith}},
pages = {{108}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Auf dem Weg : Conception & Realisation of a Music Video - And its Promotional Benefit for the Upcoming Indieband FRETIX}}},
year = {{2009}},
}
@misc{1353,
author = {{Dyck, Vitali}},
pages = {{24}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Produktion einer Audio-CD}}},
year = {{2009}},
}
@misc{1355,
author = {{Möser, Annika and Buss, Maximilian and Kessler, Daniel}},
pages = {{35 / 138 / 162}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Chiro & Bobu : eine verhängnisvolle Freundschaft}}},
year = {{2009}},
}
@misc{1359,
author = {{Braumüller, Frederik}},
pages = {{53 / 13 / 20 / 5/ 1/ 1}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Bildgestaltung/Kamera für den Kurzfilm »Nicht Heute«}}},
year = {{2009}},
}
@inproceedings{6483,
author = {{Song, Jian}},
location = {{Dortmund}},
title = {{{High performance plating for electronic contacts – Nanopartikel modifizierte Edelmetalloberflächen}}},
year = {{2008}},
}
@inproceedings{6552,
author = {{Conze, K.-J. and Lohr, Mathias and Brockhaus, T. and Mauersberger, R. and Suhling, F.}},
booktitle = {{Tagungsband zum 27. Jahrestagung der Gesellschaft deutschsprachiger Odonataologen (GdO e. V.) }},
location = {{Potsdam}},
pages = {{57--58}},
title = {{{Libellen in Deutschland – Arbeitsstand und Fragestellungen für das Atlasprojekt auf Bundesebene}}},
year = {{2008}},
}
@article{6792,
author = {{Hadamitzky, A. and Geist, Alexander and von Blanckenburg, Korbinian}},
issn = {{1860-3025}},
journal = {{Hochschulmanagement}},
number = {{2}},
pages = {{37--41}},
publisher = {{UVW, Univ.-Verl. Webler }},
title = {{{Studiengebühren aus finanzwissenschaftlicher Perspektive. Ein Bereitstellungsmodell für Hochschulpolitik und -management}}},
year = {{2008}},
}
@article{6827,
author = {{von Blanckenburg, Korbinian and Geist, Alexander and Hadamitzky, Andreas }},
journal = {{Wirtschaftswissenschaftliches Studium : WiSt ; Zeitschrift für Studium und Forschung }},
number = {{5}},
pages = {{245--250}},
publisher = {{Beck }},
title = {{{Imputation bei unvollständigen Datensätzen}}},
doi = {{10.15358/0340-1650-2008-5-245 }},
volume = {{37}},
year = {{2008}},
}
@article{6830,
author = {{Hadamitzky, Andreas and Geist, Alexander and von Blanckenburg, Korbinian}},
issn = {{0018-2974 }},
journal = {{Das Hochschulwesen }},
number = {{1}},
pages = {{6--11}},
publisher = {{UVW, Univ.-Verl. Webler }},
title = {{{Studiengebührenmodelle in der Praxis}}},
volume = {{55}},
year = {{2008}},
}
@article{6831,
author = {{Schulte, Stefanie Patricia and Repp, nicolas and Eckert, Julian and Steinmetz, Ralf and Schaarschmidt, Ralf and von Blanckenburg, Korbinian}},
issn = {{1862-6378}},
journal = {{International journal of interoperability in business information systems : IBIS }},
number = {{7}},
pages = {{9--36}},
publisher = {{Universität Oldenburg}},
title = {{{Service-oriented Architectures – Status Quo and Prospects for the German Banking Industry}}},
volume = {{3}},
year = {{2008}},
}
@article{6892,
author = {{von Blanckenburg, Korbinian}},
journal = {{Beiträge zur angewandten Wirtschaftsforschung, Schriftenreihe des Centrums für angewandte Wirtschaftsforschung Münster}},
pages = {{37 S.}},
publisher = {{CAWM}},
title = {{{Grenzen der Stabilitätsintervalle für die KMD-Regelprozesse}}},
volume = {{28}},
year = {{2008}},
}
@article{6894,
author = {{von Blanckenburg, Korbinian}},
journal = {{Beiträge zur angewandten Wirtschaftsforschung, Schriftenreihe des Centrums für angewandte Wirtschaftsforschung Münster}},
pages = {{24 S.}},
publisher = {{CAWM}},
title = {{{Eine Methode zur Schätzung der Rückkopplungsparameter im Koordinationsmängel-Diagnosekonzept}}},
volume = {{27}},
year = {{2008}},
}
@article{6895,
author = {{Geist, Alexander and von Blanckenburg, Korbinian and Hadamitzky, Andreas}},
journal = {{Beiträge zur angewandten Wirtschaftsforschung, Schriftenreihe des Centrums für angewandte Wirtschaftsforschung Münster}},
pages = {{16 S.}},
publisher = {{CAWM}},
title = {{{Die Legitimation des Briefmonopols zur Finanzierung des Universaldienstes im Briefverkehr}}},
volume = {{25}},
year = {{2008}},
}
@article{6896,
author = {{von Blanckenburg, Korbinian and Reher, Gerrit}},
journal = {{Beiträge zur angewandten Wirtschaftsforschung, Schriftenreihe des Centrums für angewandte Wirtschaftsforschung Münster}},
pages = {{45 S.}},
publisher = {{CAWM}},
title = {{{Testverfahren zur Beurteilung der Funktionsfähigkeit von Marktprozessen}}},
volume = {{23}},
year = {{2008}},
}
@misc{7225,
author = {{Sureth, Caren and Nordhoff, Daniel}},
booktitle = {{Der Betrieb}},
issn = {{0005-9935}},
number = {{7/2008}},
pages = {{305--311}},
publisher = {{FACHVERLAG Verlagsgruppe Handelsblatt}},
title = {{{Kritische Anmerkungen zur Ermittlung des tatsächlichen Werts einer Familienpersonengesellschaft nach neuer Rechtslage}}},
year = {{2008}},
}
@article{7231,
author = {{Sureth, Caren and Nordhoff, Daniel}},
journal = {{DATEV Bildungsforum}},
number = {{3/2008}},
pages = {{15--17}},
title = {{{Praxisnähe und universitäre Ausbildung: Fallstudie der Universität Paderborn}}},
year = {{2008}},
}
@misc{7616,
author = {{Köhler, Martin and Schlötzer, Carsten and Förster, Marc-Oliver and Gerlach, Alexander and Lammering, Thomas}},
booktitle = {{Tiefbau Ingenieurbau Straßenbau}},
number = {{12}},
pages = {{28--35}},
publisher = {{Bau Verlag}},
title = {{{Schäden an Verkehrsflächenbefestigungen infolge undichter Hausanschlussstutzen an den Hauptkanal}}},
year = {{2008}},
}
@misc{7648,
author = {{Köhler, Martin and Solas, Hartmut}},
booktitle = {{Betonwerk und Fertigteiltechnik }},
issn = {{ 0373-4331}},
number = {{2}},
pages = {{178--179}},
publisher = {{Bauverlag}},
title = {{{Straßen- und Kanalnetzschäden - Wechselwirkungen und Praxiserfahrungen}}},
year = {{2008}},
}
@book{7649,
author = {{Hofmann, Martin Ludwig}},
isbn = {{978-3-7705-4577-3}},
pages = {{160}},
publisher = {{Wilhelm Fink Verlag}},
title = {{{Mindbombs. Was Werbung und PR von Greenpeace & Co. lernen können}}},
year = {{2008}},
}
@misc{7661,
author = {{Köhler, Martin and Ulonska, Dietmar}},
booktitle = {{Betonwerk und Fertigteiltechnik}},
number = {{9}},
pages = {{16--27}},
publisher = {{Bauverlag}},
title = {{{Schadensvermeidung bei Pflasterbefestigungen - Aufeinander abgestimmte Gesteinskörnungen für Bettung und Fugen}}},
year = {{2008}},
}
@misc{7662,
author = {{Köhler, Martin}},
booktitle = {{Aufbereitungs Technik - Mineral Processing}},
number = {{7}},
pages = {{28--39}},
publisher = {{Bauverlag}},
title = {{{Optimierte Kies- und Sandprodukte - Schadensvermeidung bei Pflasterbefesti¬gungen durch abgestimmte Kornverteilungslinien / Optimized Gravel and Sand Products - Avoiding Damage of Sett Paving Systems with Coordinated Grain Size Distribution Curves}}},
year = {{2008}},
}
@misc{7663,
author = {{Köhler, Martin}},
booktitle = {{Gesteinsperspektiven}},
number = {{3}},
pages = {{32}},
publisher = {{Stein-Verlag}},
title = {{{Optimierte Kies- und Sandprodukte für den Straßenbau}}},
year = {{2008}},
}
@misc{7664,
author = {{Köhler, Martin and Nießen, Jürgen and Johannßen, Karsten}},
booktitle = {{Tiefbau Ingenieurbau Straßenbau}},
number = {{3}},
pages = {{22--29}},
publisher = {{Bauverlag}},
title = {{{Messung der Dicke des Fahrbahnoberbaus mit dem Georadarverfahren unter Bezug auf ein reflektierendes Geotextil auf der Planumsebene}}},
year = {{2008}},
}
@article{7817,
abstract = {{Abstract The concept of 3D photonic intermediate reflectors for micromorph silicon tandem solar cells has been investigated. In thin-film silicon tandem solar cells consisting of amorphous and microcrystalline silicon with two junctions of a-Si/μc-Si, efficiency enhancements can be achieved by increasing the current density in the a-Si top cell. It is one goal to provide an optimized current matching at high current densities. For an ideal photon-management between top and bottom cell, a spectrally selective intermediate reflective layer (IRL) is necessary, which is less dependent of the angle of incidence than state-of-the-art thickness dependent massive interlayers. The design, preparation and characterization of a 3D photonic thin-film filter device for this purpose has been pursued straight forward in simulation and experimental realization. The inverted opal is capable of providing a suitable optical band stop with high reflectance and the necessary long wavelength transmittance as well and provides further options for improved light trapping. We have determined numerically the relative efficiency enhancement of an a-Si/μc-Si tandem solar cell using a conductive 3D-photonic crystal. We have further fabricated such structures by ZnO-replication of polymeric opals using chemical vapour deposition and atomic layer deposition techniques and present the results of their characterization. Thin film photonic IRL have been prepared at the rear side of a-Si solar cells. Completed with a back contact, this is the first step to integrate this novel technology into an a-Si/μc-Si tandem solar cell process. The spectral response of the cell is presented and compared with reference cells. (© 2008 WILEY-VCH Verlag GmbH \& Co. KGaA, Weinheim)}},
author = {{Bielawny, Andreas and Üpping, Johannes and Miclea, Paul T. and Wehrspohn, Ralf B. and Rockstuhl, Carsten and Lederer, Falk and Peters, Marius and Steidl, Lorenz and Zentel, Rudolf and Lee, Seung-Mo and Knez, Mato and Lambertz, Andreas and Carius, Reinhard}},
journal = {{physica status solidi (a)}},
keywords = {{42.70.Qs, 78.66.Jg, 78.67.Bf, 81.07.Bc, 84.60.Jt}},
number = {{12}},
pages = {{2796--2810}},
title = {{{3D photonic crystal intermediate reflector for micromorph thin-film tandem solar cell}}},
doi = {{https://doi.org/10.1002/pssa.200880455}},
volume = {{205}},
year = {{2008}},
}
@misc{11645,
author = {{Rohler, Hans-Peter}},
booktitle = {{Stadt und Grün}},
issn = {{0948-9770}},
number = {{08}},
pages = {{46–50}},
publisher = {{Patzer Verlag}},
title = {{{Regional Abgestimmte Pflege - Regionales Parkpflegewerk Emscher Landschaftspark}}},
year = {{2008}},
}
@misc{12056,
author = {{Kutz, Gerd and Liping, L. and Li, D.}},
location = {{Barcelona (Spanien)}},
title = {{{Process analysis of fluid bed granulation using risk assessment and design of experiments}}},
year = {{2008}},
}
@misc{12158,
author = {{Kutz, Gerd and Walger, T.}},
location = {{Barcelona (Spanien)}},
title = {{{Optimisation of a film Coating process using design of experiments}}},
year = {{2008}},
}
@misc{12251,
abstract = {{The effects of the recent warming trend in many northern temperate lakes on the species composition of spring phytoplankton remain poorly understood, especially because a recent change in nutrients has complicated efforts, and previous studies have defined spring according to the calendar. We analysed data from 1979 to 2004 from Lake Müggelsee (Berlin, Germany), using physical and biological parameters to define the spring period. We show that a change in timing of spring plankton events in warm years led to the paradox of lower mean water temperatures during the growth period, favouring cold‐adapted diatoms over cyanobacteria, and within the diatoms, some cold‐adapted centric forms over pennate forms. Under high P : Si ratios, the increased time between phytoplankton and cladoceran peaks opened a loophole for filamentous cyanobacteria (Oscillatoriales) in warm years to establish dominance after the diatoms, which are silicate limited. Therefore, the warming trend promotes filamentous cyanobacteria, a well‐known nuisance in eutrophic lakes, and surprisingly, cold‐adapted diatoms.}},
author = {{Shatwell, Tom and Köhler, Jan and Nicklisch, Andreas}},
booktitle = {{Global Change Biology}},
issn = {{1354-1013}},
number = {{9}},
pages = {{2194--2200}},
publisher = {{Wiley}},
title = {{{Warming promotes cold‐adapted phytoplankton in temperate lakes and opens a loophole for Oscillatoriales in spring}}},
doi = {{10.1111/j.1365-2486.2008.01630.x}},
volume = {{14}},
year = {{2008}},
}
@misc{1429,
author = {{Hermann, Anna}},
pages = {{59}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Fünfte Jahreszeit : Internetseite zum Thema Karneval}}},
year = {{2008}},
}
@book{1435,
author = {{Kaboth, Peter}},
isbn = {{978-3-8364-8374-2}},
pages = {{60}},
publisher = {{VDM Verlag Dr. Müller}},
title = {{{Ästhetik der Bewegung im Animationsfilm: eine Analyse der Konventionen und Standards}}},
year = {{2008}},
}
@misc{1436,
author = {{Denninger, Fabian}},
keywords = {{Multi-Touch, Multitouch Multitouch}},
pages = {{134}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung "Ökotouch".}}},
year = {{2008}},
}
@misc{1576,
author = {{Ottrand, Mareike}},
keywords = {{Gestaltung, Illustration, Insekten, Web Site}},
pages = {{37 / 29}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Insekten WG : Konzeption und Realisation einer Flash-Website mit dem Schwerpunkt in Gestaltung und Illustration.}}},
year = {{2008}},
}
@misc{1831,
author = {{Thomsen, Maike and Peters, Katharina and Wohlgemuth, Sebastian}},
pages = {{57}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Willkommen bei Hettich!}}},
year = {{2008}},
}
@misc{1832,
author = {{Waldmann, Boris and Vorwald, Timo}},
pages = {{53}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Vegaz: "Black Poison"}}},
year = {{2008}},
}
@misc{1834,
author = {{Bozkartal, Orhan}},
pages = {{38}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Das Osmanische Reich: Gestaltung, Konzeption und Programmierung einer interaktiven Flash Website}}},
year = {{2008}},
}
@misc{1836,
author = {{Böhne, Ingo}},
pages = {{91}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{WAGO Webvideo : Realisierung einer multimedialen, interaktiven Flash- Anwendung zur Produktvisualisierung, sowie Konzeption der zugehörigen Datenbank im Backend}}},
year = {{2008}},
}
@misc{1838,
author = {{Drochtert, Hanna}},
pages = {{113}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Petrus 2.0: Filmfinanzierung und Preproduction eines Drehbuchs}}},
year = {{2008}},
}
@misc{1840,
author = {{Pieper, Daniela}},
pages = {{65}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{The music video - a medium between art and commerce}}},
year = {{2008}},
}
@misc{1842,
author = {{Niggemeier, Markus and Willems, Tobias}},
pages = {{133}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Production of a Rock Music Video}}},
year = {{2008}},
}
@misc{1844,
author = {{Heime, Bianca}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption und Gestaltung eines Infotainmentmagazins für die afghanische Bevölkerung, im Rahmes des Einsatzes der Bundeswehr an der ISAF}}},
year = {{2008}},
}
@misc{1850,
author = {{Lindner, Andreas}},
pages = {{116}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption, Gestaltung und Realisation eines Corporate Designs für den SPD Ortsverein Neu Wulmstorf}}},
year = {{2008}},
}
@misc{1852,
author = {{Özdemir, Coskun}},
pages = {{19}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Interaktives Webportal für Bürger türkischer Herkunft in OWL}}},
year = {{2008}},
}
@misc{1854,
author = {{Olszowska, Paula}},
pages = {{89}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Concept, design & realization of a music video with focus on compositing}}},
year = {{2008}},
}
@misc{1856,
author = {{Bonney, Dana Jane and Mönch, Sebastian}},
pages = {{222}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Take a DIVE}}},
year = {{2008}},
}
@misc{1858,
author = {{Ricken, Jens and Wittemeier, Hendrik}},
pages = {{159}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Corporate Design für St. Loyen}}},
year = {{2008}},
}
@misc{1859,
author = {{Pilz, Philipp}},
pages = {{88}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Snowboarding : Jahreskollektion 2008 für die Firma 3Deluxe incl. Kataloggestaltung}}},
year = {{2008}},
}
@misc{1861,
author = {{Heine, Eva-Lotte}},
pages = {{67}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption und Umsetzung eines Corporate Design für die Olof-Palme-Gesamtschule Hiddenhausen}}},
year = {{2008}},
}
@misc{1864,
author = {{Linnemann, Matthias}},
pages = {{116}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Africa Westfalica : Die Freilichtbühne Porta spielt den König der Löwen}}},
year = {{2008}},
}
@misc{1866,
author = {{Tewes, Katharina}},
pages = {{64}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Erstellung eines Corporate Design für die Firma HEGLA in Form eines neuen Logos, einer Imagebroschüre und einem Relaunch der bestehenden Internetseite}}},
year = {{2008}},
}
@misc{1867,
author = {{Stürenburg, Klaas}},
pages = {{20}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Paradies : Kamerakonzept}}},
year = {{2008}},
}
@misc{1869,
author = {{Otto, Alexander}},
pages = {{48}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Dont give up : Erstellung eines 3D-Kurzfilms}}},
year = {{2008}},
}
@misc{1872,
author = {{Wenke, Jan and Papworth, Mark}},
pages = {{69}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{TerrActiv auf dem Weserradweg}}},
year = {{2008}},
}
@misc{1874,
author = {{Gutbier, Bettina}},
pages = {{34}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{3d-animierter Werbespot für In-Game-Advertising}}},
year = {{2008}},
}
@misc{1876,
author = {{Schneider, Anna-Maria and Mittag, Sebastian}},
pages = {{19}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Schwarz wie der Tag : Konzeption und Realisation eines narrativen Kurzfilmes ; Von der zündenden Idee bis zum fertigen Film}}},
year = {{2008}},
}
@article{2069,
abstract = {{During printed product manufacturing, measures are taken to ensure a certain level of printing quality and security via authentification methods. This is particularly true in the field of security printing, where the quality standards, which must be reached by the end-products, i.e. banknotes, security documents and the like, are very high. It is accepted, that print defects are generated because printing parameters but also machine parameters will change unnoticed in production. Therefore, a new concept for a multi-sensory adaptive learning and classification model based on Fuzzy-Pattern-Classifiers for data inspection, authentification and machine conditioning is proposed. This kind of inspection concept, which combines optical, acoustical and other machine information, produces a large amount of data, which leads to multivariate methods for data analysis. Multivariate methods are useful for analysis of large and complex data sets that consist of many variables measured on large numbers of physical data. A general aim is to improve the known inspection techniques and propose an inspection methodology that can ensure a comprehensive quality control of the printed substrates processed by printing presses, especially printing presses which are designed to process substrates used in the course of the production of banknotes, security documents and others. }},
author = {{Dyck, Walter and Türke, Thomas and Schaede, Johannes and Lohweg, Volker}},
journal = {{Optical Document Security - The 2008 Conference on Optical Security and Counterfeit Deterrence; Reconnaissance International Publishers and Consultants, San Francisco, CA, USA}},
keywords = {{authentification, anti-counterfeit features, inspection, quality, sensor fusion, pattern recognition}},
title = {{{A New Concept on Quality Inspection and Machine Conditioning for Security Prints}}},
year = {{2008}},
}
@inproceedings{2070,
abstract = {{A Two-Layer Conflict Solving data fusion approach is proposed in this work, with an aim to provide another approach to data fusion community. Since the evidence of Dempster-Shafer Theory, algorithms for combining pieces of evidence have drawn a considerable attention from data fusion researchers, along with many alternatives invented. However, none of these approaches receive an agreement for being able to perform very successfully in all scenarios and hence this topic is still in hot discussion. Therefore, the suggested approach in this work will contribute as a novel method and present its own merits. }},
author = {{Li, Rui and Lohweg, Volker}},
keywords = {{fusion community, data fusion researcher, dempster-shafer theory, many alternative, novel method, considerable attention, hot discussion, suggested approach}},
title = {{{A Novel Data Fusion Approach using Two-Layer Conflict Solving}}},
year = {{2008}},
}
@inproceedings{2071,
abstract = {{In this paper, a fuzzy pattern classification tuning approach is proposed, which is based on fusion concept. In this method, tuning parameters are learned in a training procedure, enabling system to be capable of managing individual classification task. Fuzzy c-means, as a specific instance of Tuning Reference, is employed as a tool to offer membership function which is used for making decisions and its membership function fuses (tunes) another membership function captured from fuzzy pattern classification and then final decisions are made upon fused one. Experiments are taken on five benchmark datasets, one of them shows an equal performance and the other four present better results than each single classifier.}},
author = {{Li, Rui and Lohweg, Volker}},
isbn = {{978-3-8007-3092-6}},
keywords = {{tuning parameter, information fusion, fuzzy cmeans, membership function, fuzzy pattern classification}},
publisher = {{In: The 11th Conference on Information Fusion, June 30 - July 3, Cologne, Germany}},
title = {{{Fuzzy Pattern Classification Tuning by Parameter Learning based on Fusion Concept}}},
year = {{2008}},
}
@inproceedings{2072,
author = {{Lohweg, Volker and Possel-Dölken, Frank}},
publisher = {{Innovationsdialog NRW, dSPACE GmbH, Technologiepark, Paderborn}},
title = {{{Oberflächenanalyse mit intelligenten Netzwerk-Kameras - Virtuelle Produktentwicklung mit Simulation/Verkürzung Time-to-Market durch Einsatz von Simulationstechniken}}},
year = {{2008}},
}
@inproceedings{2073,
abstract = {{Synthetic surfaces, in particular polymer structures, which are used for electronic components, have to be inspected in industrial processes. Polymers show some specific surface characteristics. This a-priori knowledge is useable for the feature extraction of a surface texture and a following classification. The feature extraction is performed by using statistical information, calculated from sum and difference histograms, while the classification is executed by a fuzzy pattern classifier. A defect area can be recognized just on the basis of the tested image and without the need of any further reference learning data. The classification of a defect part is achieved by analyzing the divergence of the extracted feature values from their median related to the inspected area. Surfaces that contain an inconsistent texture will be rejected.}},
author = {{Niederhöfer, Marcus and Lohweg, Volker}},
booktitle = {{13th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2008)}},
title = {{{Application-based Approach for Automatic Texture Defect Recognition on Synthetic Surfaces}}},
doi = {{10.1109/ETFA.2008.4638397}},
year = {{2008}},
}
@inproceedings{2074,
abstract = {{Veranstaltungsreihe quot;solution OWLquot;; }},
author = {{Lohweg, Volker}},
publisher = {{Veranstaltungsreihe "solution OWL", Claas Technoparc, Harsewinkel, 28.10.2008}},
title = {{{Intelligente Automation durch Sensorfusion, Adaptronik - Mediatronik - Kognitronik – Schlüssel für die Entwicklung intelligenter Systeme}}},
year = {{2008}},
}
@article{2329,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
journal = {{Proceedings in Applied Mathematics and Mechanics}},
number = {{1}},
pages = {{10307--10308}},
title = {{{Goal-oriented r-adaptivity based on the evaluation of the physical and material residual}}},
doi = {{10.1002/pamm.200810307}},
volume = {{8}},
year = {{2008}},
}
@article{2330,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
journal = {{Computational Mechanics}},
number = {{5}},
pages = {{661--681}},
title = {{{On variational sensitivity analysis and configurational mechanics}}},
doi = {{10.1007/s00466-007-0223-5}},
volume = {{41}},
year = {{2008}},
}
@article{2433,
author = {{Upmann, Matthias and Klein, Günter}},
journal = {{Rundschau für Fleischhygiene und Lebensmittelüberwachung }},
number = {{1}},
pages = {{14--15}},
title = {{{Visuelle Fleischuntersuchung bald auch bei Mastkälbern?}}},
volume = {{60}},
year = {{2008}},
}
@article{2463,
author = {{Upmann, Matthias and Langen, Marcus and Peters, Ulrike and Kein, Günter }},
journal = {{Rundschau für Fleischhygiene und Lebensmittelüberwachung }},
number = {{9}},
pages = {{354--355}},
title = {{{Genotypisierung von Campylobacter spp. in der Lebensmittelkette}}},
volume = {{58}},
year = {{2008}},
}
@article{2498,
author = {{Delcenserie, V. and Loncric, D. and Bonaparte, C. and Upmann, Matthias and China, B. and Daube, G. and Gavini, F.}},
journal = {{J. Appl. Microbiol.}},
pages = {{276--284}},
title = {{{Bifidobacteria as indicators of faecal contamination along a sheep meat production chain}}},
volume = {{104}},
year = {{2008}},
}
@inproceedings{2499,
author = {{Upmann, Matthias and Peters, U. and Langen, M. and Klein, G.}},
location = {{Garmisch-Partenkirchen}},
title = {{{Botulismus in einem Putenmastbetrieb - molekularbiologische Ermittlung einer potentielle Infektionsquelle}}},
year = {{2008}},
}
@article{2500,
author = {{Upmann, Matthias and Peters, U. and Langen, M. and Klein, G.}},
journal = {{Amtstierärztlicher Dienst und Lebensmittelkontrolle}},
title = {{{Botulismus in einem Putenmastbetrieb - molekularbiologische Ermittlung einer potentielle Infektionsquelle}}},
year = {{2008}},
}
@inproceedings{2501,
author = {{Upmann, Matthias and Peters, U. and Langen, M. and Beneke, B. and Klein, G.}},
location = {{Garmisch-Partenkirchen}},
title = {{{Diversität von Campyobacter-Isolaten aus biologischer und konventioneller Geflügelmast}}},
year = {{2008}},
}
@inproceedings{2502,
author = {{Upmann, Matthias and Peters, U. and Langen, M. and Beneke, B. and Klein, G.}},
booktitle = {{Amtstierärztlicher Dienst und Lebensmittelkontrolle}},
title = {{{Diversität von Campyobacter-Isolaten aus biologischer und konventioneller Geflügelmast}}},
year = {{2008}},
}
@misc{2503,
author = {{Al.Masri, A.-N. and Grabowski, N.T. and Abusseir, S. and Upmann, Matthias and Klein, G.}},
booktitle = {{Tierärztliche Umschau}},
pages = {{449--456 ; 510--515}},
title = {{{Die Stellung des Tieres im Islam zu Lebzeiten des Propheten bis zum Kalifat (ca. 10-1492 n. Chr.) anhand religiöser Quellen}}},
volume = {{63}},
year = {{2008}},
}
@article{2508,
author = {{von Blanckenburg, Korbinian and Michaelis, Michael}},
issn = {{0043-6275}},
journal = {{Wirtschaftsdienst}},
number = {{6}},
pages = {{415--420}},
title = {{{Regulierungsmöglichkeiten auf dem Markt für Online-Auktionen}}},
doi = {{10.1007/s10273-008-0812-8}},
volume = {{88}},
year = {{2008}},
}
@article{2510,
author = {{von Blanckenburg, Korbinian and Geist, Alexander}},
issn = {{0340-1650 }},
journal = {{WiSt : Wirtschaftswissenschaftliches Studium}},
number = {{4}},
pages = {{203 -- 211}},
publisher = {{Beck}},
title = {{{Kreditvergabe: Kernkompetenz oder Auslagerungskandidat?}}},
doi = {{10.15358/0340-1650-2008-4-203 }},
volume = {{37}},
year = {{2008}},
}
@book{2692,
author = {{Ernesti, Werner and Kattenbusch, Markus and Kuhlenkamp, Dieter and Kuhne, Volker and Noosten, Dirk and Stiglocher, Hans and Plümecke, Karl}},
isbn = {{978-3-481-02332-4}},
pages = {{600}},
publisher = {{Müller}},
title = {{{Plümecke – Preisermittlung für Bauarbeiten}}},
year = {{2008}},
}
@inproceedings{3982,
author = {{Kutz, Gerd}},
location = {{Detmold}},
title = {{{Rohstoffe in Emulsionen}}},
year = {{2008}},
}
@article{3984,
author = {{Kutz, Gerd}},
issn = {{0942-7694}},
journal = {{SOFW-Journal : Home & personal care ingredients & formulations; Deutsche Ausgabe}},
number = {{9}},
pages = {{70--78}},
publisher = {{Verl. für Chemische Industrie, Ziolkowsky}},
title = {{{Aktuelle Rohstoffe und Formulierungsstrategien}}},
volume = {{134}},
year = {{2008}},
}
@article{3986,
author = {{Kutz, Gerd and Salzmann, Volker and Weber, M. and Lewandowski, A.}},
issn = {{0942-7694}},
journal = {{SOFW-Journal : Home & personal care ingredients & formulations. Deutsche Ausgabe }},
number = {{8}},
pages = {{41--46}},
publisher = {{Verl. für Chemische Industrie, Ziolkowsky}},
title = {{{Feasibility Studies Regarding Manufacturing of Submicron Systems Using a New "Totor/Rotor"-Preocessing facility}}},
volume = {{134}},
year = {{2008}},
}
@inproceedings{3987,
author = {{Kutz, Gerd and Walger, T. and Feiler, S. and Solot, P.}},
location = {{Stoos (Schweiz)}},
title = {{{Optimisation of a film coating process using design of experiments}}},
year = {{2008}},
}
@inproceedings{3990,
author = {{Kutz, Gerd}},
location = {{Karlsruhe}},
title = {{{Pharmazeutische Emulsionen}}},
year = {{2008}},
}
@inproceedings{3991,
author = {{Kutz, Gerd}},
location = {{Tübingen}},
title = {{{Neue Rohstoffe und Formulierungsstrategien}}},
year = {{2008}},
}
@inproceedings{4051,
abstract = {{This paper presents a hardware-in-the-loop simulation system for simulating BLDC motors. The test bench combines two key technologies; first an electric motor simulation on the electric interface level, which is not only based on control signals but also emulates real currents and voltages; secondly an FPGA-based (field-programmable gate array) electric motor model. The overall simulation concept represents a comprehensive simulation of the electric motor, which is therefore suitable for running controllers incorporating sensorless motor control. Thus it enables integrated hardware-in-the-loop testing for control units which could formerly only be tested by means of mechanical test benches.}},
author = {{Schulte, Thomas and Bracker, J.}},
pages = {{2195 -- 2200}},
publisher = {{IEEE}},
title = {{{Real-time simulation of BLDC motors for hardware-in-the-loop applications incorporating sensorless control}}},
year = {{2008}},
}
@inproceedings{4052,
abstract = {{In modern vehicles, electrical drives and power electronics are used to control a large variety of different applications. To operate these components electronic control units have to be designed and tested. To validate the software of the electronic control units hardware-in-the-loop simulation is a todaypsilas standard method. Hardware-in-the-loop simulation always comprises a real-time simulation of the plant, including actuator and sensor models. In case of an electronic circuit the plant consists of passive components like capacitors and inductors, usually assumed to be linear, and semi-conductors with nonlinear and discontinuous behavior. The following paper suggests classification criteria and compares different methods for real-time simulations of electronic circuits considering switching events. For evaluation theoretical considerations as well as simulation results are presented concerning differences in approaches.}},
author = {{Maas, Jürgen and Schulte, Thomas and Graf, C. and Weise-Emden, J.}},
pages = {{2829 -- 2834}},
publisher = {{IEEE}},
title = {{{Real-time HIL-simulation of power electronics}}},
year = {{2008}},
}
@inbook{4053,
abstract = {{Die Verwendung von E-Motoren für komplexe und sicherheitskritische Funktionen in Fahrzeugen erfordert umfangreiche Tests bei der Systementwicklung. Dabei hat sich die HIL-Simulation (Hardware-in-the-Loop-Simulation) zum Testen der Softwarefunktionen als Standardwerkzeug etabliert. Bei Systemen mit Elektromotoren müssen besondere Anforderungen an die Simulationsumgebung gestellt werden. Diese ergeben sich aus der hohen Dynamik der elektrischen Größen, der relativ hohen elektrischen Leistungen, dem oft hohen Integrationsgrad der Steuergeräte-Hardware und der Einbindung der elektrlschen Antriebe in ubergeordnete Fahrzeugfunktionen. In diesem Beitrag wird ein System zur E-Motorsimulation auf elektrischer Leistungsebene vorgestellt. Dazu werden neben einer FPGA-basierten E-Motorsimulation hoch-dynamische elektronische Lasten verwendet.}},
author = {{Schulte, Thomas and Bracker, Jörg}},
booktitle = {{Steuerung und Regelung von Fahrzeugen und Mortoren : VDI-Berichte 2009}},
isbn = {{978-3-18-092009-2}},
pages = {{115 -- 124}},
title = {{{Echtzeitfähige Elektromotorsimulation mit realen Strömen und Spannungen für Hardware-in-the-Loop-Anwendungen}}},
year = {{2008}},
}
@article{4427,
author = {{Jasperneite, Jürgen and Trsek, Henning}},
journal = {{Computer & Automation}},
pages = {{44--48}},
title = {{{Schnell von Zelle zu Zelle}}},
volume = {{2}},
year = {{2008}},
}
@article{4428,
author = {{Jasperneite, Jürgen and Lessmann, Gunnar and Weber, Karl}},
journal = {{In: Profibus & Profinet Journal}},
pages = {{8-- 9}},
publisher = {{Profibus Nutzerorganisation e.V. }},
title = {{{Mit Profinet in die Zukunft}}},
year = {{2008}},
}
@inproceedings{4429,
author = {{Kumar, Barath and Jasperneite, Jürgen}},
booktitle = {{7th IEEE International Workshop on Factory Communication Systems (WFCS 2008)}},
location = {{Dresden}},
pages = {{247 -- 250}},
title = {{{Industrial Communication Protocol Engineering using UML 2.0: a Case Study}}},
year = {{2008}},
}
@inproceedings{4430,
author = {{Schumacher, Markus and Jasperneite, Jürgen}},
booktitle = {{7th IEEE International Workshop on Factory Communication Systems (WFCS 2008) }},
location = {{Dresden}},
pages = {{159 -- 167}},
title = {{{A new Approach for Increasing the Performance of the Industrial Ethernet System PROFINET}}},
year = {{2008}},
}
@inproceedings{4438,
author = {{Jasperneite, Jürgen}},
location = {{Yildiz University Istanbul, Turkey }},
title = {{{How to offer hands-on experiences on Industrial Communications ?}}},
year = {{2008}},
}
@article{4440,
author = {{Jasperneite, Jürgen}},
journal = {{Maschinenbau und Metallbearbeitung Deutschland }},
pages = {{162--163}},
publisher = {{Kuhn-Fachverlag}},
title = {{{Integration von Feldbussen in Echtzeit-Ethernet-Netzwerke}}},
year = {{2008}},
}
@article{4441,
author = {{Jasperneite, Jürgen}},
journal = {{Maschinenbau und Metallbearbeitung Deutschland }},
pages = {{228 --229}},
publisher = {{Kuhn-Fachverlag}},
title = {{{Wenn Drähte stören, haben Wireless-Lösungen Vorteile}}},
year = {{2008}},
}
@inproceedings{4443,
author = {{Hameed, Mohsin and Trsek, Henning and Graeser, Olaf and Jasperneite, Jürgen}},
location = {{Hamburg}},
title = {{{Performance Investigation and Optimization of IEEE802.15.4 for Industrial Wireless Sensor Networks}}},
year = {{2008}},
}
@inproceedings{4444,
author = {{Imtiaz, Jahanzaib and Jasperneite, Jürgen and Weber, Karl and Lessmann, Gunnar and Goetz, Franz-Josef}},
location = {{Hamburg}},
title = {{{A Novel Method for Auto Configuration of Realtime Ethernet Networks}}},
year = {{2008}},
}
@inproceedings{4446,
author = {{Jasperneite, Jürgen and Trsek, Henning}},
location = {{Bochum}},
title = {{{Reproduzierbare Leistungsmessungen und Konformitäts-/Interoperabilitätstests von IEEE 802.11 WLAN Implementierungen}}},
year = {{2008}},
}
@inproceedings{4447,
author = {{Kumar, Barath and Imtiaz, Jahanzaib and Jasperneite, Jürgen}},
location = {{Rennes, France}},
title = {{{Applicability of UML MARTE's Schedulability sub-package for Engineering Industrial Real-time Protocols}}},
year = {{2008}},
}
@inproceedings{4449,
author = {{Graeser, Olaf and Trsek, Henning and Jasperneite, Jürgen}},
location = {{Rennes, France}},
title = {{{Investigations on Traffic Patterns for Timing Requirements of an Industrial Real-Time System in Factory Automation}}},
year = {{2008}},
}
@inproceedings{4450,
author = {{Jasperneite, Jürgen}},
location = {{Barcelona}},
title = {{{Industrial Communications - A Survey}}},
year = {{2008}},
}
@inproceedings{4452,
author = {{Jasperneite, Jürgen}},
location = {{WZL der RTWH Aachen}},
title = {{{Aktueller Stand und Trends in der industriellen Echtzeitkommunikation}}},
year = {{2008}},
}
@misc{8178,
author = {{Oldenburg, Martin and Andrea, Albold and Wendland, Claudia and Otterpohl , Ralf}},
booktitle = {{KA Korrespondenz Abwasser, Abfall}},
number = {{10}},
pages = {{1100 -- 1105}},
publisher = {{DWA}},
title = {{{Erfahrungen aus dem Betrieb eines neuen Sanitärsystems über einen Zeitraum von acht Jahren. }}},
year = {{2008}},
}
@misc{8179,
author = {{Oldenburg, Martin and Meinzinger, Franziska and Nisipeanu, Peter and Schneider, Christian }},
booktitle = {{KA Korrespondenz Abwasser, Abfall }},
number = {{10}},
pages = {{1113--1119}},
publisher = {{DWA - Deutsche Vereinigung für Wasserwirtschaft, Abwasser und Abfall e. V.}},
title = {{{Begrifflichkeiten und Kennzahlen zur Zusammensetzung von Teilströmen neuartiger Sanitärsysteme}}},
year = {{2008}},
}
@misc{8180,
author = {{Peter-Fröhlihc, Anton and Pawlowski, Ludwig and Bonhomme, Andre and Oldenburg, Martin}},
booktitle = {{KA Korrespondenz Abwasser, Abfall}},
number = {{10}},
pages = {{1106--1112}},
publisher = {{DWA - Deutsche Vereinigung für Wasserwirtschaft, Abwasser und Abfall e. V.}},
title = {{{Separate Erfassung und Behandlung von Urin, Braun- und Gelbwasser - Erfahrungen aus einem EU-Demonstrationsprojekt}}},
year = {{2008}},
}
@misc{8266,
author = {{Höing, M. and Ahmad, K. and Meier, Uwe}},
booktitle = {{Wireless Automation 2008, 28.02. - 29.02.2008, Berlin}},
publisher = {{Wireless Automation}},
title = {{{Koexistenzmessungen – von der Theorie zu Standardisierungsbetrachtungen, dargestellt anhand von Messungen an einem industriellen Bluetooth-System}}},
year = {{2008}},
}
@misc{8267,
author = {{Ahmad, K. and Meier, Uwe}},
booktitle = {{7th IEEE International Workshop on Factory Communication Systems - WFCS 2008, Dresden, Germany}},
publisher = {{IEEE International Workshop on Factory Communication Systems - WFCS}},
title = {{{Coexistence Optimization of Wireless PAN Automation Systems}}},
year = {{2008}},
}
@misc{8268,
author = {{Bastert, M. and Echterhoff, M. and Altmaier, H. and Meier, Uwe}},
booktitle = {{10. Wireless Technologies Kongress 2008, Bochum, September 2008}},
publisher = {{Wireless Technologies Kongress}},
title = {{{Maritime Funkanwendungen – Einsatzszenarien und Erprobungsmessungen}}},
year = {{2008}},
}
@misc{8269,
author = {{Bastert, M. and Nußbaum, K. and Steiner, B. and Altmaier, H. and Meier, Uwe}},
booktitle = {{10. Wireless Technologies Kongress 2008, Bochum, September 2008}},
publisher = {{Wireless Technologies Kongress}},
title = {{{Reproduzierbare Vermessung von Funksystemen in zeit- und frequenzselektiven Fading-Umgebungen}}},
year = {{2008}},
}
@misc{8285,
author = {{Schmelter, Andreas}},
publisher = {{Technische Hochschule Ostwestfalen Lippe}},
title = {{{Entwicklung eines prototypischen Security Gateways auf Basis einer FPGA Entwicklungsplattform unter Nutzung des Embedded-Betriebssystems µC-Linux}}},
year = {{2008}},
}
@misc{8311,
author = {{Hausmann, Stefan}},
publisher = {{Technische Hochschule OWL}},
title = {{{Untersuchung und Optimierung der Linux IPsec Implementierung unter besonderer Berücksichtigung einer Krypto-Hardware}}},
year = {{2008}},
}
@misc{8970,
author = {{Kümmel, Jens and Ständer, Ute}},
booktitle = {{Praxis der internationalen Rechnungslegung : PiR ; die Zeitschrift zur IFRS-Bilanzierung.}},
issn = {{1862-8753}},
number = {{4}},
pages = {{58--63}},
publisher = {{NWB Verlag}},
title = {{{Die Bilanzierung von Kundenbonusprogrammen nach IFRIC 13}}},
year = {{2008}},
}
@misc{9060,
author = {{Wiedemann, Diana}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Bauenergetische Untersuchung und bauphysikalisch optimierte Sanierung mit Umbau des Rathauses in Oerlinghausen}}},
year = {{2008}},
}
@misc{9061,
author = {{Helmecke, Fritz}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Hygrothermische Simulation von Lehmoberflächen}}},
year = {{2008}},
}
@misc{9076,
author = {{Schluch , Nadine}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Untersuchung der Einflüsse von Fenster- und Verschattungsvarianten auf den sommerlichen und winterlichen Wärmeschutz}}},
year = {{2008}},
}
@misc{9077,
author = {{Makagon, Julia}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Sanierung einer Schule in Hessen auf der Grundlage der Landesbauordnung und der Energieeinsparverordnung}}},
year = {{2008}},
}
@misc{9078,
author = {{Stockhecke, Jana Sarina }},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Raumklimasimulation des Weserrenaissance-Museums mit dem Simulationsprogramm TRNSYS}}},
year = {{2008}},
}
@misc{9447,
author = {{Wilhelm, Patrick}},
booktitle = {{Lebensmitteltechnik}},
issn = {{0047-4290}},
number = {{11}},
pages = {{42 -- 43}},
publisher = {{LT Food Medien-Verlag GmbH}},
title = {{{Mehr Nachhaltigkeit. ProcessNet behandelte energie- und rohstoffeffiziente Verfahren.}}},
year = {{2008}},
}
@techreport{2749,
author = {{Müller, Ulrich and Jordan, Volkmar and Triantafillaki, Christina and Schlitter, Klaus and Schneider, Peter}},
title = {{{Phytoextraktion mit wässrigen Zweiphasensystemen : wertvolle pflanzliche Inhaltsstoffe wie Oleanolsäure oder kosmetisch wirksame Substanzen sollen mit Hilfe von Mesophasen wässriger Tensidsysteme extrahiert werden ; ausführlicher Sachbericht zum Schlussbericht des FH3-Projekts ; Berichtszeitraum: 01.07.2006 - 31.12.2008}}},
year = {{2008}},
}
@article{2759,
author = {{Müller, Ulrich and Bart, Hans-Jürgen and Jordan, Volkmar and Schlitter, Klaus and Schneider, Pia}},
issn = {{1522-2640 }},
journal = {{Chemie-Ingenieur-Technik}},
number = {{9}},
pages = {{1292 -- 1293}},
publisher = {{Wiley-VCH}},
title = {{{Entwicklung eines Prozesses zur Phytoextraktion mit wässrigen Zweiphasensystemen}}},
doi = {{https://doi.org/10.1002/cite.200750575}},
volume = {{80}},
year = {{2008}},
}
@misc{2911,
author = {{Brod, H. and Kauling, J. and Frahm, Björn and Jenne, M. and Langer, U. and Bödeker, B.}},
location = {{Leverkusen, Germany}},
title = {{{Pushing the Limits in High-Density Mammalian Cell Fermentation}}},
year = {{2008}},
}
@inproceedings{2933,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
location = {{Bremen}},
title = {{{Goal-oriented r-adaptivity based on the evaluation of the physical and material residual}}},
year = {{2008}},
}
@inproceedings{2941,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
location = {{Venice}},
title = {{{On r-adaptive mesh optimization for local quantities of interest based on the material residual}}},
year = {{2008}},
}
@inproceedings{2942,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
location = {{Erlangen}},
title = {{{A variational framework for dual solutions in the physical and material space}}},
year = {{2008}},
}
@misc{2968,
author = {{Frahm, Björn and Brod, H. and Burnett, M. and Langer, U. and Bödeker, B.}},
location = {{Palladium, Cologne, Germany}},
title = {{{High cell density bioreactor cultivation by Dynamic Membrane Aeration (DMA)}}},
year = {{2008}},
}
@misc{2969,
author = {{Frahm, Björn and Brod, Helmut}},
location = {{Leverkusen, Germany}},
title = {{{High cell density bioreactor cultivation by Dynamic Membrane Aeration (DMA)}}},
year = {{2008}},
}
@article{3060,
author = {{Schwitalla, P. and Mennerich, A. and Austermann-Haun, Ute and Müller, A. and Doringer, C. and Daims, H. and Holm, N. C. and Rönner-Holm, S. G. E.}},
journal = {{Water Science & Technology}},
number = {{2}},
title = {{{NH4+ ad-/desorption in sequencing batch reactors: simulation, laboratory and full-scale studies}}},
volume = {{58}},
year = {{2008}},
}
@article{3090,
author = {{Austermann-Haun, Ute}},
journal = {{gwf - Spezcial Wasser + Abwasser}},
number = {{14}},
pages = {{6 -- 11}},
title = {{{Anaerobverfahren – Übersicht}}},
volume = {{149}},
year = {{2008}},
}
@inproceedings{3154,
author = {{Austermann-Haun, Ute}},
location = {{Universität Damaskus, Syrien}},
title = {{{Mechanische Abwasserreinigung}}},
year = {{2008}},
}
@inproceedings{3155,
author = {{Austermann-Haun, Ute}},
location = {{Emmenbrücke, Schweiz}},
title = {{{Anaerobe Verfahren – Eine Technik im Aufwind}}},
year = {{2008}},
}
@inproceedings{3244,
author = {{Austermann-Haun, Ute}},
location = {{Jung Pumpen Forum, Steinhagen}},
title = {{{Betriebsstörungen auf Kläranlagen – Identifikation und Lösungen}}},
year = {{2008}},
}
@inproceedings{3247,
author = {{Austermann-Haun, Ute}},
location = {{Werkstatt Emilie GmbH, Detmold}},
title = {{{Hausanschlussleitungen – Kanalinspektion, Dichtheitsprüfung und Sanierungsverfahren}}},
year = {{2008}},
}
@inproceedings{3248,
author = {{Austermann-Haun, Ute}},
location = {{Werkstatt Emilie GmbH, Detmold}},
title = {{{Die neue Trinkwasserverordnung und ihre Auswirkungen auf die Hausinstallation}}},
year = {{2008}},
}
@inproceedings{3249,
author = {{Austermann-Haun, Ute}},
location = {{FH Lippe und Höxter in Detmold}},
title = {{{Die Aufgaben des Gewässerschutzbeauftragten}}},
year = {{2008}},
}
@inproceedings{3250,
author = {{Austermann-Haun, Ute}},
location = {{FH Lippe und Höxter in Detmold}},
title = {{{Betriebsprobleme und -Störungen auf Kläranlagen – Lösungsansätze}}},
year = {{2008}},
}
@inproceedings{3251,
author = {{Austermann-Haun, Ute}},
location = {{FH Lippe und Höxter in Detmold}},
title = {{{Der Gewässerschutzbericht – Inhalte und Aufbau}}},
year = {{2008}},
}
@inproceedings{3252,
author = {{Austermann-Haun, Ute}},
location = {{FH Lippe und Höxter in Detmold}},
title = {{{Anforderungen an das Einleiten von Abwasser aus Industriebetrieben}}},
year = {{2008}},
}
@inbook{3481,
author = {{Jungkind, Wilfried and Willems, Christian}},
booktitle = {{Kompetenzen in der Hochschullehre: Rüstzeug für gutes Lehren und Lernen an Hochschulen}},
editor = {{Stelzer-Rothe, Thomas}},
isbn = {{978-3-8120-0641-5}},
pages = {{366 -- 393}},
publisher = {{Merkur-Verlag}},
title = {{{Vom Leidbild zum Leitbild : Fachbereiche als Lernende Organisation}}},
volume = {{641}},
year = {{2008}},
}
@article{3530,
author = {{Schneider, Jan and Weber, I. and Pahl, R.}},
issn = {{0723-1520}},
journal = {{Brewing science}},
number = {{3}},
pages = {{105--112}},
publisher = {{Carl}},
title = {{{Measurement of Water Vapour Ingress in PET Bottles and Correlation with Oxygen and Carbon Dioxide Permeation}}},
volume = {{61}},
year = {{2008}},
}
@article{3531,
author = {{Schneider, Jan and Pahl, R. and Methner, F.-J. and Kowalczyk, J. and Hausmanns, S. and Radowski, A.}},
issn = {{0723-1520}},
journal = {{Brewing science}},
number = {{2}},
pages = {{49--55}},
publisher = {{Carl}},
title = {{{Study on the Applicability of Isomaltulose (Palatinose™ ) in Beer and Beer Specialties}}},
volume = {{61}},
year = {{2008}},
}
@inproceedings{3661,
abstract = {{Gold plates are widely used for high performance connectors. Pure gold is very soft. In order to improve the wear resistance of gold plates, hard gold is usually used. The high hardness is achieved by alloying elements such as cobalt, iron or nickel. With an increasing rate of alloying elements the hardness of gold plates is increased. On the other hand, the alloying elements decrease the electrical conductivity, the corrosion resistance and the formability of gold plates. Our investigation shows that the wear rate of the hard gold plates at the contact area is still very high. The depth of the crater at the contact area very soon exceeds the thickness of the gold plates during the wear tests. Since the nickel underplate, the barrier layer, is very sensitive to fretting corrosion, the electric contacts must electrically fail at this stage, due to the strong increase of contact resistance. However, many electric contacts do not fail at this stage and at stages far beyond. Two very different wear patterns are the reasons for this phenomenon. Different amounts of gold, alloying elements, nickel and elements of base metals can be found at the bottom of the crater at the contact area by means of energy dispersive X-ray analysis (EDX). Depending on the lateral and spatial distribution of these elements, quite different electrical behavior of electric contacts can be observed. Therefore achieving the favored wear pattern, not increasing wear resistance alone, should be the target of modification of plating materials for increasing the lifetime of electric contacts.}},
author = {{Song, Jian and Koch, Christian}},
booktitle = {{ 2008 Proceedings of the 54th IEEE Holm Conference on Electrical Contacts}},
location = {{Orlando, FL, USA}},
pages = {{238 -- 244}},
title = {{{Wear Patterns and Lifetime of Electric Contacts}}},
doi = {{10.1109/HOLM.2008.ECP.50}},
year = {{2008}},
}
@article{3847,
author = {{Riegel, Adrian and Horstmann, Sebastian}},
issn = {{2192-8681}},
journal = {{Adhäsion - Kleben & Dichten}},
number = {{3}},
pages = {{28--32, 34--40}},
publisher = {{Springer}},
title = {{{Ummantelungsverfahren besser verstehen : Prozesssicherheit beim Fügen}}},
volume = {{52}},
year = {{2008}},
}
@article{3849,
author = {{Riegel, Adrian and Horstmann, Sebastian}},
issn = {{0018-3881 }},
journal = {{Holztechnologie}},
number = {{3}},
pages = {{26 -- 30}},
publisher = {{Institut für Holztechnologie}},
title = {{{Temperaturverlauf des Schmelzklebstoffes beim Ummanteln : Gegenüberstellung von näherungsweisen Berechnungen mit Online Messungen}}},
volume = {{49}},
year = {{2008}},
}
@inproceedings{3851,
abstract = {{Ummanteln ist eine Fertigungstechnologie, deren Bedeutung noch immer w~chst. Mit ihr werden Holzwerkstoffprofile und Kaschierungen mit Schmelzklebstoffen gefügt Zu deutlich geringeren Kosten werden Profjlelemente erzeugt, die heute ihren Vorbildern aus Massivholz oder Metallen in Optik und Haptik gleichkommen oder einen eigenständigen Charme aufweisen. Allerdings müssen beim Ummantelungsprozess eine Vielzahl an Andruckrollen und ggf. Heißluftdüsen entlang des durchlaufenden Profils angeordnet werden, um die meist nur eingeschränkt formbare, mit heißem Schmelzkleber beschichtete Kaschierung mit dem Profilkern zu fügen. Da die Maschinen im Stillstand manuell gerüstet werden, reduziert die dafür benötigte Rüstzeit deutlich die Produktivität der Ummantelungsanlagen. Daher muss das Rüsten off-line, parallel zu den Fertigungsaufträgen. an einem separaten ROststand erfolgen und sich somit die Belegungszeit der Anlage auf das Einwechseln der Rollensätze beschränken. Basierend auf einer umfangreichen Prozessbetrachtung wurde ein Prozessmodell entwickelt, welches mittels Geometriedaten, Rüstregeln sowie Informationen über Material, Werkzeug und Ummantelungsmaschine ein virtuelles Bild der Rollenpositionierung erzeugt Die daraus gewonnenen Positionen und Anstellwinkel der einzelnen Rollen werden dann Ober einen Postprozessor an einen roboterunterstutzten Rüstplatz weitergegeben, welcher die benötigten Rollenhalter automatisiert rüstet.}},
author = {{Riegel, Adrian and Hoffmeister, Hans-Werner and Horstmann, Sebastian and Strauß, Henning}},
booktitle = {{ 2. Internationale Konferenz zur Automation in der Holzwirtschaft : 18. und 19. September 2008}},
isbn = {{ 9783952319857}},
location = {{Biel, Schweiz}},
pages = {{137 -- 145}},
publisher = {{Berner Fachhochschule, Architektur, Holz und Bau}},
title = {{{Automatisiertes Off-Line-Rüsten von Ummantelungsanlagen}}},
year = {{2008}},
}
@inbook{3853,
abstract = {{Beim Schleifen von Holz und Holzwerkstoffen mit konstantem Druck (Holz-und lackzwischenschliff) ergibt sich das Spanungsvolumen aus der Kombination der Eingangsgrößen und kann nicht direkt eingestellt werden. Das Prozessergebnis selbst (Oberflächengüte) kann nur extrem aufwendig und kaum vollständig durch skalierte Messgrößen und auch nur unzureichend durch online arbeitende Sensortechnik erfasst werden. Prozessmcdelle. mit denen die Zusammenhänge beim Schleifen prinzipiell erklärt werden können. wurden in der Vergangenheit entwickelt und könnten für eine Prozessoptimierung bzw. -regelung herangezogen werden. Eine direkte Regelung der Qualitätsmerkmale scheite.rt aber derzeit an der nicht verfügbaren Sensortechnik. Durch methodische sensorische Prüfverfahren. bei denen aus visuellen und haptischen Eindrücken mehrer Prüfer durch statistische Tests eine objektive Aussage erzeugt wird. können aussagekräftige Kenngrößen für die eigentriche ZieJgröße erzielt werden. Diese sind nur offline verfügbar. können aber mit indirekten, online verfügbaren Prozesskenngrößen korreliert werden. Ein Reglerentwurf ist daher auf Basis quantitativer Zusammenhänge möglich. Das schwankende Verschleissverhalten der Schleifbänder zwingt aber vermutlich zu adaptiven Regelungen auf Basis unscharfer Logik. Eine autonom agierende ••intelligente" Schleifmaschine scheint möglich.}},
author = {{Riegel, Adrian and Hellmann, Torben and Kortüm, Christian}},
booktitle = {{2. Internationale Konferenz zur Automation in der Holzwirtschaft : 18. und 19. September 2008}},
isbn = {{ 9783952319857}},
pages = {{83 -- 92}},
publisher = {{Berner Fachhochschule, Architektur, Holz und Bau}},
title = {{{Reproduzierbare Gütebestimmung von Holzoberflächen als Basis für eine Prozessregelung beim Schleifen}}},
year = {{2008}},
}
@article{3855,
author = {{Riegel, Adrian and Küster, Klaus}},
issn = {{0018-3881}},
journal = {{Holztechnologie}},
number = {{5}},
pages = {{23 -- 26}},
publisher = {{Institut für Holztechnologie}},
title = {{{Fotografische Dokumentation von bearbeiteten Holzoberflächen}}},
volume = {{49}},
year = {{2008}},
}
@article{3857,
author = {{Riegel, Adrian}},
issn = {{0018-3822}},
journal = {{Die Holzbearbeitung}},
number = {{9}},
pages = {{71 -- 73}},
publisher = {{A.G.T.-Verlag}},
title = {{{Flexibel und sicher. Optimierung des Kantenanleimens auf Bearbeitungszentren}}},
volume = {{55}},
year = {{2008}},
}
@article{3859,
author = {{Riegel, Adrian}},
issn = {{0018-3792}},
journal = {{Holz-Zentralblatt}},
number = {{2}},
pages = {{45}},
publisher = {{Holz-Zentralblatt-Verl.}},
title = {{{Maschinenkonzepte deutlich optimieren : Was ist nach über einer Dekade Total Productive Maintenance in der Branche angekommen}}},
volume = {{134}},
year = {{2008}},
}
@inproceedings{5598,
author = {{Tabassam, Ahmad Ali and Heiss, Stefan}},
booktitle = {{2008 IEEE Region 5 Conference}},
isbn = {{9781424420766}},
title = {{{Bluetooth Clock Recovery and Hop Sequence Synchronization Using Software Defined Radios}}},
doi = {{10.1109/tpsd.2008.4562737}},
year = {{2008}},
}
@inproceedings{5599,
author = {{Tabassam, Ahmad Ali and Heiss, Stefan and Hoing, Michael}},
booktitle = {{2007 International Conference on Emerging Technologies}},
isbn = {{9781424414932}},
title = {{{Bluetooth Device Discovery and Hop Synchronization by the Eavesdropper}}},
doi = {{10.1109/icet.2007.4516305}},
year = {{2008}},
}
@inbook{5883,
abstract = {{The study of users’ emotional behavior as an important aspect of the user experience has been receiving increasing attention for the past few years. In this paper we discuss the multi-component character of emotions and its consideration in the area of human-technology interaction. Based on the approach proposed by Scherer [1], various aspects of emotions were investigated in an interactive context: subjective feelings, physiological activation, motor expression, cognitive appraisals, and behavioral tendencies. In an experiment emotion-related changes were detected for a number of emo tional components by using a variety of methods: rating scales for sub jec tive feelings, electromyography of facial muscles, heart rate, electrodermal activity, perfor mance data and questionnaires on cognitive appraisals. Results are discussed with respect to the correlation between the components and their associated methods. We suggest that a combination of methods provides a comprehensive basis for analyzing emotions as an aspect of the user experience.}},
author = {{Mahlke, Sascha and Minge, Michael}},
booktitle = {{Affect and Emotion in HCI}},
editor = {{Peter, Christian and Beale, Russell}},
isbn = {{978-3-540-85098-4}},
issn = {{1611-3349}},
pages = {{51--62}},
publisher = {{Springer}},
title = {{{Consideration of Multiple Components of Emotions in Human-Technology Interaction}}},
doi = {{10.1007/978-3-540-85099-1_5}},
volume = {{4868}},
year = {{2008}},
}
@inbook{5931,
author = {{Boone, Nicholas and Elias, Hans-Gunnar}},
booktitle = {{Reagible Unternehmen in dynamischen Märkten : [10. Paderborner Frühjahrstagung des Fraunhofer-Anwendungszentrums für Logistikorientierte Betriebswirtschaft ]}},
isbn = {{3-935433-95-6}},
location = {{Paderborn}},
pages = {{427--440}},
publisher = {{Fraunhofer-ALB}},
title = {{{A Pragmatic and Flexible Approach to establish a systematic Supply Chain Risk Management for a Manufacturer of Electronic Components}}},
volume = {{16}},
year = {{2008}},
}
@inproceedings{6118,
author = {{Müller, Ulrich and Jordan, V. and Triantafillaki, C.}},
location = {{Bernburg/Saale}},
title = {{{Gewinnung von Wirkstoffen aus Arzneipflanzen mittels eines neuen Extraktionsverfahrens auf Basis von Mesophasen von Emulgatoren}}},
year = {{2008}},
}
@inproceedings{6119,
author = {{Müller, Ulrich}},
location = {{Paderborn}},
title = {{{Entkeimung von Naturstoffen in Feststoffmischern}}},
year = {{2008}},
}
@inproceedings{6120,
author = {{Schneider, P. and Jordan, V. and Schlitter, K. and Müller, Ulrich and Bart, H.-J. and Bischoff, F.}},
location = {{Clausthal-Zellerfeld}},
title = {{{Entwicklung eines Prozesses zur Phytoextraktion mit wässrigen Zweiphasensystemen}}},
year = {{2008}},
}
@inproceedings{6121,
author = {{Müller, Ulrich and Triantafillaki, C.}},
location = {{Gießen}},
title = {{{Phytoextraktion mit Mesophasen}}},
year = {{2008}},
}
@article{622,
abstract = {{The objective of this paper is to depict the knowledge array of standards. This is done by identifying and analyzing external effects, specifically spillover effects. The database used is Perinorm. We use a cluster analysis in order to create groups of technology fields for German standards according to the fields of the International Classification of Standards. Methodologically, the distances between these objects or clusters are defined by the chosen distance measure, which in turn is determined by the sum of their cross references. The applied joining clustering method uses these distances between the objects and allows the data to be mapped within a two dimensional space. The results of this mapping show the existence of structures within the standards data fitting to the well-known structure of patent spillovers.}},
author = {{Gamber, Thilo Gerhard and Friedrich-Nishio, MNonika and Grupp, Hariolf}},
issn = {{1588-2861}},
journal = {{Scientometrics}},
keywords = {{Total Factor Productivity, Technological Progress, Spillover Effect, Knowledge Spillover, European Standard}},
number = {{1}},
pages = {{89--108}},
publisher = {{Springer}},
title = {{{Science and Technology in Standardization: a Statistical Analysis of Merging Knowledge Structures}}},
doi = {{https://doi.org/10.1007/s11192-008-0105-4}},
volume = {{74}},
year = {{2008}},
}
@article{623,
abstract = {{Die Ermittlung von Zeitdaten stellt eine wesentliche Voraussetzung für das Produktivitätsmanagement dar. So werden durch Vorgabezeiten für Arbeitsaufträge die Erwartungen an die Ausführung einer Arbeitsaufgabe quantifiziert. Vorgabezeiten, die mittels wissenschaftlich fundierter Methoden gebildet werden, setzen ein faires, von den Beteiligten akzeptiertes Leistungsniveau fest und haben vielfältige betriebliche Verwendungszwecke (z. B. Bewertung unterschiedlicher Arbeitsprozesse, Personalbemessung, Personaleinsatzplanung, Prämienberechnung). Ziel dieses Beitrages ist es, Möglichkeiten und Grenzen der Anwendung von Methoden der Zeitwirtschaft im Dienstleistungssektor zu erläutern und methodische Weiterentwicklungspotenziale aufzuzeigen. Da der Dienstleistungssektor, zu dem unter anderem die Wirtschaftsbereiche Handel, Verkehr, Kreditinstitute, Versicherungsunternehmen und Wohnungsvermietung gehören, hinsichtlich seiner Struktur recht heterogen ist, wird im folgenden beispielhaft die Dienstleistungsbranche des stationären Einzelhandels betrachtet. Um das dargestellte Ziel dieses Beitrages zu erreichen, wird in einem ersten Schritt die Dienstleistungsbranche des Einzelhandels kurz charakterisiert. In einem zweiten Schritt wird eine Typologisierung von Arbeit vorgenommen. Dieser Schritt ist notwendig, da die Anwendungsmöglichkeiten und -grenzen von Methoden der Zeitwirtschaft nicht alleine an einem Wirtschaftssektor, wie dem Dienstleistungssektor, noch an einer Dienstleistungsbranche, sondern ausschließlich an den Merkmalen von Tätigkeiten aufgezeigt werden können. In einem dritten Schritt werden Tätigkeiten typischer Mitarbeitergruppen aus der Dienstleistungsbranche des Einzelhandels in die Typologie eingeordnet. Aufbauend auf dieser Einordnung werden in einem vierten Schritt die Anwendungsmöglichkeiten und -grenzen bestehender zeitwirtschaftlicher Methoden in Bezug auf die ausgewählten Tätigkeiten dargestellt und methodische Weiterentwicklungen in der Zeitwirtschaft aufgezeigt.}},
author = {{Hinrichsen, Sven and Schlick, Christopher Marc}},
issn = {{1866-2269 }},
journal = {{Industrial Engineering}},
keywords = {{Dienstleistung, Einzelhandel, Multimomentstudien, Produktivitätsmanagement, Zeitwirtschaft}},
number = {{3}},
pages = {{14--19}},
publisher = {{REFA-Bundesverband }},
title = {{{Zeitwirtschaft in Dienstleistungsbetrieben - Methoden für das Produktivitätsmanagement}}},
volume = {{61}},
year = {{2008}},
}
@inproceedings{624,
author = {{Hinrichsen, Sven and Schlick, Christopher Marc and Steiger, Peter and Wurz, Hubert}},
booktitle = {{How business take flight : IIE annual conference and expo 2008, May 17 - 21, The Westin Bayshore, Vancouver, B.C., Canada ; conference proceedings ; [including] 2008 Industrial Engineering Research Conference}},
location = {{Vancouver}},
number = {{1}},
pages = {{643--648}},
publisher = {{Institute of Industrial Engineers }},
title = {{{Forecasting Method for Estimation of Labor Times in Complex Projects illustrated by a Factory Planning Case Study}}},
year = {{2008}},
}
@inproceedings{625,
author = {{Zülch, Gert and Stock, P. and Hrdina, J. and Gamber, Thilo Gerhard}},
booktitle = {{Arbeitsgestaltung für KMU : 10. - 11. September 2008 an der TU Ilmenau }},
isbn = {{ 978-3-938843-39-0}},
location = {{Ilmenau}},
number = {{1}},
pages = {{51--58}},
publisher = {{ISLE - Ilmenau : Univ.-Bibliothek der TU }},
title = {{{Arbeitszeitgestaltung mit Hilfe der Simulation}}},
year = {{2008}},
}
@inproceedings{6273,
author = {{Song, Jian}},
booktitle = {{Proceedings of 16th International Colloquium Tribology}},
location = {{Esslingen}},
title = {{{Wear of Plastic Bearings under Sandy Environmental Conditions}}},
year = {{2008}},
}
@inproceedings{6274,
author = {{Song, Jian and Alberani, A.}},
booktitle = {{The 24th International Conference on Electrical Contacts (ICEC)}},
location = {{Saint Malo}},
title = {{{Fritting and Electrical Resistance of Tin Coated Contacts under Low Level Conditions}}},
year = {{2008}},
}
@inproceedings{6275,
author = {{Song, Jian and Koch, C.}},
booktitle = {{Proceedings of 54 IEEE Holm Conference on Electrical Contacts}},
location = {{Orlando}},
title = {{{Wear Patterns and Life Time of Electric Contacts}}},
year = {{2008}},
}
@misc{10154,
abstract = {{The performance investigation of different Bluetooth modules needs a module independent approach, which can be used in real time and which allows to consider different Bluetooth modules and communication modes. This paper will give a description of a special measurement approach that was developed and implemented. The performance-parameters Bluetooth-Packet-Delay, Bit Error Rate (BER) and Packet Loss Rate (PLR) are evaluated. A series of first investigations was conducted using the implemented measurement approach to show the evaluation possibilities. Two different Bluetooth modules for different packet types and packet sizes were used.}},
author = {{Warriach, Ehsan Ullah and Witte, Stefan}},
booktitle = {{4th International Conference on Emerging Technologies : ICET 2008}},
isbn = {{9781424422104}},
keywords = {{Bluetooth, performance evaluation}},
location = {{Rawalpindi, Pakistan}},
publisher = {{IEEE}},
title = {{{Approach for performance investigation of different Bluetooth modules and communication modes}}},
doi = {{10.1109/ICET.2008.4777494}},
year = {{2008}},
}
@misc{10209,
author = {{Becker, Christian and Heiss, Stefan and Ingenhorst, Stefan and Schroeder, Stefan and Witte, Stefan}},
booktitle = {{Der Eisenbahningenieur : EI / Verband Deutscher Eisenbahn-Ingenieure e.V. (VDEI) }},
issn = {{0013-2810}},
number = {{9}},
publisher = {{DVV Media Group, Eurailpress}},
title = {{{IT meets Railways – Anforderungen für IP-basierte LANs in Zügen}}},
year = {{2008}},
}
@inbook{475,
abstract = {{Agentenbasierter Ansatz zur Modellierung und Simulation persönlicher Präferenzen, beispielhaft aufgezeigt am Krankenhausbereich
Trotz der allgemein relativ hohen Arbeitslosigkeit in unserer Gesellschaft stellt sich die Beschäftigungssituation in bestimmten Berufsgruppen anders dar: Hier besteht ein Mangel an Arbeitskräften, der im Laufe der Zeit noch zunehmen wird. Dies bedeutet, dass Arbeitnehmer, die bereits beruflich überlastet sind, immer noch mehr Arbeit leisten müssen.}},
author = {{Gamber, Thilo Gerhard and Börkircher, Mikko}},
booktitle = {{Mittelpunkt Mensch}},
isbn = {{978-3-531-15716-0}},
pages = {{227--247}},
publisher = {{VS Verlag für Sozialwissenschaften}},
title = {{{Vereinbarkeit von Familien- und Berufsleben bei der Gestaltung flexibler Arbeitszeiten}}},
year = {{2008}},
}
@book{5124,
author = {{Pottgiesser, Uta}},
isbn = {{ 978-3-7705-4485-1 }},
keywords = {{Baukonstruktion}},
pages = {{ 226}},
publisher = {{Wilhelm Fink GmbH & Co. Verlags-KG}},
title = {{{ Prinzipien der Baukonstruktion }}},
year = {{2008}},
}
@book{5127,
author = {{Pottgiesser, Uta and Knaack, U.}},
title = {{{Fassade2008 : Innovationen: Tagungsband}}},
year = {{2008}},
}
@article{5128,
author = {{Feirabend, Steffen and Sobek, Werner}},
issn = {{0038-9145}},
journal = {{Stahlbau}},
pages = {{16--22}},
title = {{{Bewehrtes Verbundsicherheitsglas}}},
doi = {{10.1002/stab.200810027}},
year = {{2008}},
}
@inproceedings{5129,
author = {{Pottgiesser, Uta}},
isbn = {{978-1-58603-917-2}},
title = {{{Glass curtain wall constructions : on the way to sustainability: comparing examples form Germany and Brazil}}},
doi = {{10.3233}},
year = {{2008}},
}
@article{5153,
author = {{Pottgiesser, Uta}},
journal = {{Proceedings of the 10th International DOCOMOMO Conference - The Challenge of Change: Dealing with the Legacy of the Modern Movement}},
pages = {{331--336}},
title = {{{Modern glass walls on the way to sustainability: Comparing examples from Germany and Brazil}}},
year = {{2008}},
}
@article{5157,
author = {{Pottgiesser, Uta}},
journal = {{Die Bautechnik}},
publisher = {{Verlag Ernst & Sohn}},
title = {{{Schnittstelle Fassade : International und Integral}}},
year = {{2008}},
}
@inproceedings{5158,
author = {{Pottgiesser, Uta}},
isbn = {{ 978-3-939349-05-1 }},
pages = {{ 118 Seiten }},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Tagungsband Fassade 2008 Innovationen. Jahresbericht des Forschungsschwerpunktes "ConstructionLab" }}},
year = {{2008}},
}
@inbook{5159,
author = {{Pottgiesser, Uta}},
booktitle = {{Standards der Zukunft : Wohnbau neu gedacht / Burgard, Roland [edit.]}},
publisher = {{Springer Verlag}},
title = {{{Zukunftshäuser der Vergangenheit : Wohnkonzepte des 19. + 20. Jahrhunderts}}},
year = {{2008}},
}
@misc{9780,
author = {{Bruns, Diedrich and Haustein, Nicole and Stemmer, Boris}},
booktitle = {{UVP-Report}},
issn = {{0933-0690}},
number = {{1+2}},
publisher = {{UVP-Gesellschaft e.V. }},
title = {{{Wirkungsprognose und Alternativenentwicklung in der SUP zur „Vorstudie zum Hochwasserschutzkonzept für die Einzugsgebiete von Fulda und Diemel“ }}},
volume = {{22}},
year = {{2008}},
}
@inproceedings{6445,
author = {{Triantafillaki, C. and Müller, Ulrich and Jordan, V.}},
location = {{Zürich}},
title = {{{Extraktion mit Mesophasen – Auswahl von geeigneten Emulgatoren zur Phytostoffgewinnung}}},
year = {{2007}},
}
@inproceedings{6446,
author = {{Lilie, M. and Wilhelm, Patrick and Müller, Ulrich and Walhorn, V. and Ros, R. and Anselmetti, D.}},
location = {{Zürich}},
title = {{{Haftkräfte vs. Ablösende Kräfte – Einsatz der Rasterkraftmikroskopie zur quantitativen Haftkraftmessung von Bacillus spp. Sporen}}},
year = {{2007}},
}
@inproceedings{6447,
author = {{Loskand, B. and Lilie, M. and Wilhelm, Patrick and Müller, Ulrich}},
location = {{Zürich}},
title = {{{Anlagenoptimierung bei der VDV-Entkeimung von pflanzlichen Materialien im bewegten Produktbett – Verbesserung der Produkteigenschaften und der Produktrückhaltung}}},
year = {{2007}},
}
@inproceedings{6482,
author = {{Song, Jian}},
location = {{Lemgo}},
title = {{{Steckverbindungen und Kontaktphysik}}},
year = {{2007}},
}
@article{6553,
author = {{Beinlich, Burkhard and Lohr, Mathias}},
issn = {{1860-7640 }},
journal = {{Beiträge zur Naturkunde zwischen Egge und Weser }},
number = {{19}},
pages = {{41--59}},
publisher = {{NEW }},
title = {{{Zur Tierwelt des NSG „Grundlose-Taubenborn“ bei Höxter}}},
year = {{2007}},
}
@phdthesis{6554,
author = {{Lohr, Mathias}},
isbn = {{978-3-937455-14-3}},
issn = {{1431-1313}},
pages = {{183}},
publisher = {{Wolf & Kreuels}},
title = {{{Libellen in europäischen Flusslandschaften. Besiedlungsdynamik und Habitatnutzung von Libellengemeinschaften am Unteren Allier (Frankreich) und der Oberweser (Deutschland)}}},
volume = {{17}},
year = {{2007}},
}
@article{6557,
author = {{Lohr, Mathias and Weihrauch, F. and Wildermuth, H.}},
issn = {{0723-6514 }},
journal = {{Libellula }},
number = {{26}},
pages = {{273--277}},
title = {{{Buchbesprechung. Daniel Grand & Jean-Pierre Boudot (2006) Les Libellules de France, Belgique et Luxembourg}}},
year = {{2007}},
}
@article{6832,
author = {{Hadamitzky, Andreas and von Blanckenburg, Korbinian and Backhaus, Christof}},
issn = {{1468-2516 }},
journal = {{Perspektiven der Wirtschaftspolitik}},
number = {{3}},
pages = {{256--278}},
publisher = {{de Gruyter}},
title = {{{Die Bereitstellung von öffentlich-rechtlichen Fernseh- und Rundfunkprogrammen - Eine Analyse auf Basis der Kollektivgütertheorie}}},
doi = {{10.1111/1468-2516.0251}},
volume = {{8}},
year = {{2007}},
}
@article{6834,
abstract = {{Der deutsche Stahlmarkt unterlag in der Vergangenheit heftigen Funktionsstörungen. Lassen sich diese Störungen mit Hilfe des Koordinationsmängel-Diagnosekonzepts erklären? Wie entwickeln sich das Stahlangebot und die Stahlnachfrage und wie reagiert der Stahlpreis auf Ungleichgewichte? Ist die europäische Stahlpolitik zukünftig in der Lage, die Funktionsfähigkeit des Stahlmarkts zu gewährleisten?}},
author = {{Kubani, Filip and von Blanckenburg, Korbinian}},
issn = {{1613-978X}},
journal = {{Wirtschaftsdienst : Zeitschrift für Wirtschaftspolitik}},
number = {{4}},
pages = {{243--248}},
publisher = {{ZBW}},
title = {{{Der deutsche Stahlmarkt nach der Krise: Eine wettbewerbspolitische Untersuchung}}},
doi = {{10.1007/s10273-007-0642-0}},
volume = {{87}},
year = {{2007}},
}
@book{6887,
author = {{Schulte, Stefan and Repp, Nicloas and Schaarschmidt, Ralf and Eckert, Julian and Berbner, Rainer and Steinmetz, Ralf and von Blanckenburg, Korbinian}},
isbn = {{978-3-8334-9905-0}},
pages = {{ 154 }},
publisher = {{Books on Demand GmbH}},
title = {{{Service-orientierte Architekturen - Status quo und Perspektive für die deutsche Bankenbranche}}},
volume = {{ 6}},
year = {{2007}},
}
@inbook{6888,
author = {{von Blanckenburg, Korbinian}},
booktitle = {{The Rules of the Game: Institutions, Law and Economics, Wirtschaft: Forschung und Wissenschaft}},
editor = {{Prinz, Aloys and Steenge, Albert E. and Schmidt, Jörg }},
isbn = {{ 978-3-8258-0693-4 }},
pages = {{187--203}},
publisher = {{LIT}},
title = {{{Methods of Testing the Workability of Markets}}},
volume = {{22}},
year = {{2007}},
}
@article{6897,
author = {{von Blanckenburg, Korbinian}},
issn = {{1615-2751 }},
journal = {{Volkswirtschaftliche Diskussionsbeiträge der Westfälischen Wilhelms-Universität Münster}},
pages = {{21 S.}},
publisher = {{Gesamthochschule Kassel }},
title = {{{Überprüfung der Funktionsfähigkeit von Marktprozessen im Koordinationsmängel-Diagnosekonzept}}},
volume = {{378}},
year = {{2007}},
}
@misc{7226,
author = {{Hertle, Eva and Nordhoff, Daniel and Sureth, Caren and Sloane, Peter}},
booktitle = {{Zeitschrift für Berufs- und Wirtschaftspädagogik}},
issn = {{0172-2875}},
number = {{4/2007}},
pages = {{597--611}},
publisher = {{Steiner Verlag}},
title = {{{Beschäftigungsfähigkeit (Employability) deutscher Bachelor-Absolventen: Das Fatale daran ist das Fatale darin}}},
year = {{2007}},
}
@misc{7625,
author = {{Köhler, Martin and Förster, Marc-Oliver and Gerlach, Alexander}},
booktitle = {{Straße und Autobahn}},
number = {{12}},
pages = {{671--677}},
publisher = {{Kirschbaum Verlag}},
title = {{{Zusammenhänge zwischen Straßen- und Kanalnetzschäden als Erkenntnisse aus einem Asset-Management-System}}},
year = {{2007}},
}
@misc{7665,
abstract = {{Die dauerhafte Funktionstüchtigkeit eines Trenn- und Filtergeokunststoffes ist von grundsätzlicher Bedeutung, damit die ihm zugeordnete Bauaufgabe erfüllt werden kann. Mit der richtigen Auswahl der Geotextilrobustheitsklasse kann die Nutzungsdauer eines zu errichtenden Bauwerks sichergestellt und die möglichen Erhaltungskosten deutlich verringert werden.}},
author = {{Köhler, Martin}},
booktitle = {{Tiefbau Ingenieurbau Straßenbau}},
number = {{11}},
pages = {{52--54}},
publisher = {{Bauverlag}},
title = {{{Geotextilrobustheitsklassen: Eine praxisnahe Beschreibung der Robustheit von Vliesstoffen und Geweben gegenüber Einbaubeanspruchung}}},
year = {{2007}},
}
@misc{7666,
author = {{Köhler, Martin and Förster, Marc-Oliver and Gerlach, Alexander and Lammering, Thomas and Bourdane, Aziz}},
booktitle = {{Tiefbau Ingenieurbau Straßenbau}},
number = {{10}},
pages = {{16--25}},
publisher = {{Bauverlag}},
title = {{{Zusammenhänge zwischen Straßen- und Kanalnetzschäden - Erkenntnisse aus einem Infrastruktur-Management-System}}},
year = {{2007}},
}
@misc{7667,
author = {{Köhler, Martin and Förster, Marc-Oliver and Gerlach, Alexander and Lammering, Thomas}},
booktitle = {{FGSV-Kolloquium "Kommunale Straßen"; 22./23.03.2007 in Fulda}},
location = {{Fulda}},
publisher = {{FGSV-Verlag}},
title = {{{Zusammenhänge zwischen Straßen- und Kanalnetzschäden als Erkenntnisse aus einem Asset-Management-System}}},
year = {{2007}},
}
@misc{7866,
author = {{Hellmig, Ralph J. and Janecek, Miloš and Hadzima, Branislav and Gendelman, Oleg V. and Shapiro, Michael and Molodova, Xenia and Springer, André and Estrin, Yuri}},
booktitle = {{MATERIALS TRANSACTIONS}},
issn = {{1345-9678}},
number = {{1}},
pages = {{31--37}},
publisher = {{The Japan Institute of Metals and Materials}},
title = {{{A Portrait of Copper Processed by Equal Channel Angular Pressing}}},
doi = {{10.2320/matertrans.me200717}},
volume = {{49}},
year = {{2007}},
}
@misc{12057,
author = {{Kutz, Gerd and Petrovic, S. and Walter, Marius}},
location = {{Nürnberg}},
title = {{{Re-Qualification of a fluid bed coater Type HCK 300TJ}}},
year = {{2007}},
}
@misc{12058,
author = {{Brauer, I. and Kutz, Gerd}},
location = {{Nürnberg}},
title = {{{Investigatioons regarding qualification and process validation of components of packaging lines}}},
year = {{2007}},
}
@misc{12070,
author = {{Kutz, Gerd and Salzmann, Volker and Weber, M.}},
location = {{Nürnberg}},
title = {{{Investigation regarding high shear homogenization as an alternative füor the production of submicron lipid particles}}},
year = {{2007}},
}
@misc{12252,
abstract = {{Global climate change alters the relationship between temperature and light in aquatic ecosystems, which is expected to affect the success of different phytoplankton species. To examine this, the interactions between temperature, photoperiod and light exposure (LE) (integral daily light supply) on specific growth rates were analysed for Limnothrix redekei, Planktothrix agardhii (cyanobacteria), Nitzschia acicularis and Stephanodiscus minutulus (diatoms). A model of factor interactions was developed based on new (P. agardhii and St. minutulus) and previously published laboratory studies. It describes the measured data with high precision. Temperature and photoperiod affect the parameters of the light-growth response curve differently, but these effects are the same for all species. The link between functions for temperature and photoperiod is more species-specific. Using meteorological data, the model developed here was used to study the interplay of these factors during a spring bloom in Lake Müggelsee (Berlin). It was found that while all three factors influenced phytoplankton growth, temperature and photoperiod were more important than LE. Both the intensities of the factors and the interactions between them influenced each species to a different degree. The results may help improve our understanding and ability to predict shifts in phytoplankton communities caused by weather patterns and climate change.}},
author = {{Nicklisch, Andreas and Shatwell, Tom and Kohler, Jan}},
booktitle = {{Journal of Plankton Research}},
issn = {{1464-3774}},
number = {{1}},
pages = {{75--91}},
publisher = {{Oxford University Press (OUP)}},
title = {{{Analysis and modelling of the interactive effects of temperature and light on phytoplankton growth and relevance for the spring bloom}}},
doi = {{10.1093/plankt/fbm099}},
volume = {{30}},
year = {{2007}},
}
@misc{1438,
author = {{Seibelt, Christoph}},
pages = {{47}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Peavey : Konzeption, Gestaltung und Realisation einer visuellen Identität für einen DJ, Produzenten und Promoter}}},
year = {{2007}},
}
@misc{1579,
author = {{Wenzel, Gabriele}},
keywords = {{Dokumentation, Fertigbau, Fertighausbau, Kurzfilm}},
pages = {{47}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Ein Tag - ein Haus : Konzeption und Realisierung zweier Informationsfilme über den Aufbau eines Hauses in Fertigbauweise}}},
year = {{2007}},
}
@misc{1581,
author = {{Goldacker, Kathleen}},
keywords = {{Dokumentation, Werbefilm}},
pages = {{37}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Jugendwaldheim Arendsee}}},
year = {{2007}},
}
@misc{1582,
author = {{Bierbaum, Dennis}},
pages = {{29}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Der listige Igel : ein animierter Kurzfim nach dem Märchen der Brüder Grimm}}},
year = {{2007}},
}
@misc{1584,
author = {{Brieden, Andrea}},
keywords = {{Industriedesign}},
pages = {{97}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{So verführt man Gourmets : Dokumentation der Entwicklung eines visuellen Erscheinungsbildes für eine neue Gourmet-Salat Serie der Marke HOMANN}}},
year = {{2007}},
}
@misc{1586,
author = {{Bruns, Björn Arne}},
keywords = {{Dokumentarfilm, Journalismus, Videoproduktion}},
pages = {{71}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{THE MULTIMEDIA INTERFACE OF THE REPORTING - THE VIDEO JOURNALIST -}}},
year = {{2007}},
}
@misc{1588,
author = {{Siekmann, Arne}},
keywords = {{Analyse, Dokumentarfilm, Fernsehen, Sportfilm}},
pages = {{86}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{An Analysis of Sports Documentaries, with special Focus on the Transport of Emotion}}},
year = {{2007}},
}
@misc{1590,
author = {{Klimmek, Sebastian}},
keywords = {{Dokumentarfilm, Fernsehen, Reportage, Soapopera, Vergleich}},
pages = {{60}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Reportage, documentary film and reality soap on television}}},
year = {{2007}},
}
@misc{1592,
author = {{Bazir, Polina}},
keywords = {{Anwaltspraxis, Corporate Design, Rechtsanwalt, Web Site}},
pages = {{103}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Corporate Design für Fischer & Kollegen Rechtsanwälte}}},
year = {{2007}},
}
@misc{1594,
author = {{Uden, Sönke}},
keywords = {{Dokumentarfilm, Sierra Leone}},
pages = {{81}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Production of a documentary film in Sierra Leone based on contemporary theories of documentary films}}},
year = {{2007}},
}
@misc{1596,
abstract = {{Der Bildband der hs-owl umfasst alle drei Standorte. Die Gewichtung dieser und auch der einzelnen Fachbereiche musste gleich sein. Mit Hilfsmitteln, wie Einwegkameras, die an die studierenden und Mitarbeiter(-innen) der fh verteilt wurden, ist es gelungen, einen Bildband zu gestalten, der besonders persönlich und nah das eigentliche leben der studierenden und angehörigen dieser Fachhochschule zeigt.}},
author = {{Behrens, Bettina and Lüttecke, Nicole}},
keywords = {{Bildband, Lemgo / Fachhochschule Lippe und Höxter}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{elemente : Planung, Konzeption und Realisation eines Bildbandes über die Fachhochschule Lippe und Höxter}}},
year = {{2007}},
}
@misc{1597,
author = {{Westemeyer, Sonja-Melanie}},
keywords = {{Dreidimensionale Rekonstruktion, Flyer, Werbung}},
pages = {{43}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Erstellung fotorealistischer 3D Abbildungen eines VW Käfers zur Realisierung eines Flyers}}},
year = {{2007}},
}
@misc{1601,
author = {{Jürgensmeyer, Carina}},
keywords = {{Computerunterstütztes Lernen, Malen, Web Site, Zeichnen}},
pages = {{57}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Virtuelle Kunstschule : Konzeption, Gestaltung und Realisation einer elektronischen Malschule als Webauftritt und als Lehr-DVD}}},
year = {{2007}},
}
@misc{1603,
author = {{Schwarz, Christof}},
keywords = {{High dynamic Range}},
pages = {{67}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Comparison of HD camera systems and possibilities of image improvement by set-up adjustments}}},
year = {{2007}},
}
@misc{1605,
author = {{Grandek, Rafael}},
keywords = {{Erwärmung , Stereoskopischer Film, Werbefilm}},
pages = {{58}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Zeit zu handeln! : Konzeption, Gestaltung und Realisation eines fotorealistischen, 3D-animierten Werbefilmes gegen die globale Erderwärmung}}},
year = {{2007}},
}
@misc{1607,
author = {{Schmidt, Mandy}},
keywords = {{Hörfunk, Sales-promotion, Werbesendung}},
pages = {{77}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Strategie einer erfolgreichen Major Promotion im Privatfunk basierend auf der Analyse von Promotions in- und ausländischer Radiostationen.}}},
year = {{2007}},
}
@misc{1609,
author = {{Arndt, Stefanie}},
keywords = {{Corporate Design, Die Grünen , Erneuerbare Energien, Kongress}},
pages = {{109 / 21}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Corporate Design für den Umweltkongress der GRÜNEN in OWL}}},
year = {{2007}},
}
@misc{1613,
abstract = {{High Dynamic Range (HDR) imaging is the latest approach to capture and display the real world lifelike and with highest precision in digital form. In contrast to ordinary photo / video cameras and output devices like CRTs or LCDs, the HDR technology offers an unknown extended contrast ratio and color richness. It is supposed to represent the original lighting situation of a scene including all details in the shadows and the lights as it was perceived by a human in the moment of shooting the digital image. HDR pictures and videos are promised to boost the sensation of digital content in a way, typical recording and presentation systems cannot achieve. In this Master Thesis the fundamentals and the possible fields of application of HDR are presented and evaluated. Besides a comprehensive overview about advantages and deficiencies of capturing and display technologies a deeper look inside the HDR image processing and encoding is given. The additional case study shows the experimental transfer of HDR still image generation techniques to the area of video. The occurred technical and methodical problems and final results are discussed in detail and finally, the future appliance of HDR in photography and videography is outlined.}},
author = {{Berg, Oksana and Hahn, Stefan}},
keywords = {{Photographie, Video}},
pages = {{161}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{High Dynamic Range Photography and Videography : Approaches, Problems and Chances}}},
year = {{2007}},
}
@misc{1615,
author = {{Groß, Moritz}},
keywords = {{Herstellung, Konzeption, Video}},
pages = {{23}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Duplex - Concept Video}}},
year = {{2007}},
}
@misc{1617,
author = {{Dehmel, Florian and Förster, Sebastian and Griese, Martin and Klaus, Julian}},
keywords = {{Digitale Filmtechnik}},
pages = {{72}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Rettet Ksy! : Dokumentation einer Arbeit zum Thema Umwelt und Nachhaltigkeit}}},
year = {{2007}},
}
@misc{1619,
abstract = {{Sportkegeln ist eine viel zu sehr unterschätzte Sportart, die leider sehr wenig Beachtung findet. Das Kegeln an sich hat nun mal einen schlechten Ruf. Um diesen Misstand ein für alle mal aus der Welt zu schaffen und Sportkegeln in ein besseres Licht zu rücken, wurde die Idee geboren ein Interaktives Buch zum Thema Sportkegeln auf Scherebahnen zu konzipieren, Gestalten und realisieren.}},
author = {{Gemmecke, Sonja}},
keywords = {{Dokumentation, Interaktive Medien, Interaktives Lesen, Kegeln}},
pages = {{64}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Kegeln kennt jeder - Sportkegeln niemand : Sportkegeln auf Scherebahnen}}},
year = {{2007}},
}
@misc{1620,
abstract = {{Diese Bachlorarbeit ist ein Surroundhörspiel über das Thema Beziehung, vielleicht Liebe. Das Drehbuch stammt von der Autorin selbst.}},
author = {{Francke, Adriana}},
keywords = {{Brainstorming, Hörspiel, Produktion}},
pages = {{60}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Der Streit - Hörspiel}}},
year = {{2007}},
}
@misc{1623,
author = {{Röhne, Christoph and Köhler, Marco and Werner, Roland}},
keywords = {{Filmproduktion, Kurzfilm}},
pages = {{81}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Valentins Tag - Kurzfilm}}},
year = {{2007}},
}
@misc{1625,
abstract = {{Aim fo this master thesis was to produce a music video for the song "Lucky". Lucky is a pop song with a duration of 3 minutes and 40 seconds. Ithas been written and produced by Robert Koch from Berlin. The lyrics have been written and sung by Ira from Kassel. This dissertation has been splitted into two parts. The first part is mesnt for giving general information about music video. It provides the research results about the definition, history, types, social meaning and design of mmusic video. The second part of this dissertation is a documentation about the production of the music video for the song Lucky. It contains information about the planning, the shooting, lighting, the editing, compositing and postproduction of the video.}},
author = {{Bernitzki, Frank}},
keywords = {{Beleuchtung, Medienherstellung, Musikvideo, Produktion}},
pages = {{47}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Production of a Music Video}}},
year = {{2007}},
}
@misc{1627,
author = {{Bormke, Bastian and Reif, Sebastian}},
keywords = {{Arbeitsmotivation, Inspiration, Inspiration , Kreativität, Motivation}},
pages = {{54}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Eine Prise Ispiration}}},
year = {{2007}},
}
@misc{1628,
abstract = {{Idee einer Neugestaltung des Botanischen garten Bielefelds. Dem Garten soll eine neues Aussehen gegeben werden, angefangen beim Logo und dem gesamten Corporate Design bis hin zu einem Leit- und Orientierungssystem mit neuer Beschilderung.}},
author = {{Niemann, Meike}},
keywords = {{Botanischer Garten, Corporate Design, Corporate Identity, Leitsystem, Orientierung}},
pages = {{55}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Konzeption, Gestaltung, Realisierung einer CI und eines Leit- und Orientierungssystems für den Botanischen Garten Bielefeld}}},
year = {{2007}},
}
@misc{1629,
author = {{Karle, Yvonne}},
keywords = {{Antrag, Film, Finanzierung, Förderung, Herstellungskosten, Kalkulation}},
pages = {{257}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Erstellung eines Förderantrags für das Filmprojekt "Baching - oder drei Worte zu weing" (AT)}}},
year = {{2007}},
}
@misc{1630,
author = {{Bornemann, Sven}},
keywords = {{Konzeption, Produktion, Werbesendung, Werbespot}},
pages = {{42}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Konzeption und Produktion von Infomercials}}},
year = {{2007}},
}
@misc{1645,
abstract = {{Diese Anwendung vermittelt Wissen über die Ernährung des Menschen. Da keine Grundlagen vorausgesetzt sind, werden dem Anwender zunächst Informationen über den Stoffwechsel, Energieverbrauch und die Verdauung des Meschen vermittelt. Darauf aufbauend werden die einzelnen Bausteine der Ernährung vorgestellt und ihre Wirkung und ihre Vorkommen erklärt. Der Anwender erhält die Möglichkeit ein Wissen zusätzlich auf das Themengebiet Sport zu spezialisieren. Durch Videosequenzen können fortführende Informationen vermitteln oder vorhandene gefestigt werden.}},
author = {{Böhme, Dirk}},
keywords = {{Allgemeinbildung, Allgemeinwissen, Ernährungswissenschaft, Gesunde Ernährung}},
pages = {{13}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Gesundes Wissen : Der Ernährungscoach}}},
year = {{2007}},
}
@misc{1647,
abstract = {{Erstellung eines Corporate Design für den ersten Recycling Designpreis 2007. Der Auftrag umfasst folgende Elemente: Logo, Briefkopf, Anwerben der Designer, Plakate und Flyer für Ausstellung, Einladungen.}},
author = {{Stich, Naomi and Sülwald, Silke}},
keywords = {{Produktgestaltung, Produktwettbewerb, Wertstoff, Wettbewerb}},
pages = {{47}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Recycling Design Preis}}},
year = {{2007}},
}
@misc{1648,
author = {{Göhre, Eva}},
keywords = {{Holographie, Klimaänderung, bildliche Darstellung}},
pages = {{101}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Konzeption, Gestaltung und Programmierung eines Interface für das Transparent Data System über das Thema Klimawandel}}},
year = {{2007}},
}
@misc{1650,
abstract = {{Wie studiert und lebt man in Deutschland? In Deutschland leben und studieren zur zeit 25000 chinesische Studenten - Erfahrungsbericht einer chinesischen Studentin in Bild (Kalender) und Film.}},
author = {{Zhang, Weigian}},
keywords = {{Deutschland, Eindruck, Kalender}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{2007 Ein Jahr in Deutschland - Eine Chinesische Studentin in Deutschland}}},
year = {{2007}},
}
@misc{1651,
author = {{Fritze, Robert}},
keywords = {{Kultur, Kulturguide, Plakat, Selbsstständigkeit, Termine, Theater, Corporate Identity}},
pages = {{67}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Kulturguide Lemgo und Detmold}}},
year = {{2007}},
}
@misc{1654,
author = {{Werner, Franziska and Abelt, Nina}},
keywords = {{Photographie, Schlaf}},
pages = {{65}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Schlaf : Eine fotografische Dokumentation über schlafende Menschen}}},
year = {{2007}},
}
@inproceedings{2065,
author = {{Lohweg, Volker}},
publisher = {{Vortrag 4. Fachwissenschaftliches Kolloquium für Angewandte Automatisierungstechnik in Lehre und Entwicklung an Fachhochschulen (AALE2007) in Lemgo}},
title = {{{Zukunftstechnologie Multisensorische Mustererkennung}}},
year = {{2007}},
}
@inproceedings{2067,
author = {{Lohweg, Volker}},
publisher = {{Universität Paderborn, GET Lab Forschungsseminar}},
title = {{{Fuzzy-Pattern-Classifier Multisensor-Fusion am Beispiel von Wertdruckproduktionsanlagen}}},
year = {{2007}},
}
@inproceedings{2068,
abstract = {{The production of printing goods is laborious. Furthermore, the print quality, especially in banknotes, must be assured. It is accepted, that print defects are generated because printing parameters, also machine parameters can change unnoticed. Therefore, a combined concept for a multi-sensory learning and classification model based on new adaptive fuzzy-pattern-classifiers for data inspection is proposed. This inspection concept, which combines optical, acoustical and other machine information, comes up with a large amount of data, which leads to multivariate methods for data analysis. Multivariate methods are useful for analysis of large and complex data sets that consist of many variables measured on large numbers of physical data.}},
author = {{Dyck, Walter and Türke, Thomas and Schaede, Johannes and Lohweg, Volker}},
isbn = {{978-1-4244-1565-6}},
issn = {{1551-2541 }},
keywords = {{Sensor fusion, Inspection, Optical sensors, Printing machinery, Data security, Data analysis, Production, Degradation, Principal component analysis, Karhunen-Loeve transforms}},
pages = {{accepted for publication}},
publisher = {{MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING}},
title = {{{A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion}}},
doi = {{10.1109/MLSP.2007.4414320}},
year = {{2007}},
}
@article{2303,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
journal = {{International Journal of Fracture}},
number = {{1-4}},
pages = {{133--155}},
title = {{{Variational design sensitivity analysis in the context of structural optimization and configurational mechanics}}},
doi = {{10.1007/s10704-007-9142-x}},
volume = {{147}},
year = {{2007}},
}
@inproceedings{2314,
author = {{Barthold, Franz-Joseph and Materna, Daniel}},
booktitle = {{7th World Congress on Structural and Multidisciplinary Optimization}},
number = {{Paper A0463}},
pages = {{1348--1357}},
title = {{{Remarks on different strategies for variational design sensitivity analysis}}},
year = {{2007}},
}
@article{2331,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
journal = {{Proceedings in Applied Mathematics and Mechanics}},
number = {{1}},
pages = {{1090105--1090106}},
title = {{{Variational sensitivity analysis and changes in the material configuration}}},
doi = {{10.1002/pamm.200700368}},
volume = {{7}},
year = {{2007}},
}
@inbook{2332,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
booktitle = {{Defect and Material Mechanics}},
editor = {{Dascalu, Christian and Maugin, Gérard A. and Stolz, Claude}},
isbn = {{978-1-4020-6928-4}},
pages = {{133--155}},
publisher = {{Springer}},
title = {{{Variational design sensitivity analysis in the context of structural optimization and configurational mechanics}}},
year = {{2007}},
}
@misc{2348,
author = {{Frahm, Björn and Kirchner, S. and Kauling, J. and Brod, H. and Langer, U. and Bödeker, B.}},
booktitle = {{Chemie Ingenieur Technik}},
issn = {{0009-286X}},
number = {{7}},
pages = {{1052--1058}},
publisher = {{WILEY-VCH Verlag}},
title = {{{Dynamische Membranbegasung im Bioreaktor zur Intensivierung der Sauerstoffversorgung empfindlicher Zelllinien}}},
doi = {{10.1002/cite.200700070}},
volume = {{79}},
year = {{2007}},
}
@inbook{2423,
author = {{Upmann, Matthias and Nasser Al-Maasri, Abdul and Beckmann, Lutz and Atanassova, Viktoria and Reich, Felix and Klein, Günter}},
booktitle = {{Amtstierärztlicher Dienst und Lebensmittelkontrolle Sonderausgabe}},
location = {{Garmisch-Partenkirchen }},
pages = {{156}},
title = {{{Restriktionsenzymanalyse und geographische Verteilung von Campylobacter jejuni-lsolaten im Einzugsbereich eines Norddeutschen Geflügelschlachthofs}}},
year = {{2007}},
}
@inbook{2424,
author = {{Upmann, Matthias and Klein, Günter}},
booktitle = {{Amtstierärztlicher Dienst und Lebensmittelkontrolle Sonderausgabe}},
location = {{Garmisch-Partenkirchen }},
pages = {{141}},
title = {{{Nachweisgrenzen beim molekularbiologischen Allergennachweis (Senf, Sesam, Sellerie) mittels Real-time PCR}}},
volume = {{25}},
year = {{2007}},
}
@misc{2445,
author = {{Visscher, C. and Winter, Petra and Versphol, Jutta and Stratmann, Janin and Upmann, Matthias and Beyerbach, Martin and Kamphues, J.}},
booktitle = {{Proceedings of the Society of Nutrition Physiology = Berichte der Gesellschaft für Ernährungsphysiologie }},
isbn = {{9-3-7690-4100-2}},
location = {{Göttingen}},
pages = {{105}},
publisher = {{DLG-Verl.}},
title = {{{Field study on effects or feeding eoarsely ground diets (including organic acids) on the composition of caecum content (starch content/pH/vfa concentrations) and on salmonella prevalence of slaughtered pigs}}},
volume = {{16}},
year = {{2007}},
}
@article{2459,
author = {{Upmann, Matthias and Visscher, Christian and Winter, Petra and Versphol, Jutta and Stratmann-Selke, Janin and Beyerbach, Martin and Kamphues, Josef}},
issn = {{0015-363X}},
journal = {{Fleischwirtschaft}},
number = {{7}},
pages = {{99--103}},
publisher = {{Dt. Fachverl.}},
title = {{{Effekte gröberen Futters und organischer Säuren auf die Salmonellenprävalenz bei Mastschweinen : Untersuchungen (Feldstudie) vor und nach der Schlachtung}}},
volume = {{87}},
year = {{2007}},
}
@inbook{2462,
author = {{Upmann, Matthias and Visscher, C. and Winter, Petra and Versphol, Jutta and Stratmann, Janin and Beyerbach, M. and Kamphues, J.}},
booktitle = {{Proceedings of the Society of Nutrition Physiology }},
pages = {{105}},
title = {{{Field study on effects of feeding coarsely ground diets (including organie acids) on the compositioo of eaecum content (starcb content/pHlvfa concentrations) aod 00 salmonella prevaleoce of slaugbtered pigs}}},
volume = {{16}},
year = {{2007}},
}
@article{2493,
author = {{Langen, M. and Peters, U. and Upmann, Matthias and Klein, G.}},
journal = {{Rundschau für Fleischhygiene und Lebensmittelüberwachung (RFL)}},
pages = {{354--355}},
title = {{{Genotypisierung von Campylobacter spp. In der Lebensmittelkette}}},
volume = {{58}},
year = {{2007}},
}
@inproceedings{2494,
author = {{Al-Masri, A.-N. and Reich, R. and Beckmann, L. and Atanassova, V. and Klein, G. and Upmann, Matthias}},
location = {{Garmisch-Partenkirchen }},
title = {{{Restriktionsenzymanalyse und geographische Verteilung von Campylobacter jejuni-Isolaten im Einzugsbereich eines norddeutschen Geflügelschlachthofs}}},
year = {{2007}},
}
@inproceedings{2495,
author = {{Upmann, Matthias and Klein, G.}},
location = {{Garmisch-Partenkirchen }},
title = {{{Nachweisgrenzen beim molekularbiologischen Allergennachweis (Senf, Sesam, Sellerie) mittels Real-time PCR}}},
year = {{2007}},
}
@inproceedings{2496,
author = {{Upmann, Matthias and Rüben, C. and Klein, G.}},
location = {{Halle (Westf.)}},
title = {{{Antimikrobielle Wirksamkeit von Inhaltsstoffen ätherischer Öle}}},
year = {{2007}},
}
@inbook{2497,
author = {{Upmann, Matthias and Rüben, C. and Klein, G.}},
booktitle = {{Proc. Gistazert-Tagung}},
location = {{ Halle (Westf.)}},
pages = {{56--60}},
title = {{{Antimikrobielle Wirksamkeit von Inhaltsstoffen ätherischer Öle}}},
year = {{2007}},
}
@article{2512,
author = {{von Blanckenburg, Korbinian and Schulte, Stefanie Patricia and Repp, Nicolas and Eckert, Julian and Berbner, Rainer and Schaarschmidt, Ralf and Steinmetz, Ralf}},
isbn = {{9783540785491}},
journal = {{Enterprise Applications and Services in the Finance Industry}},
title = {{{General Requirements of Banks on IT Architectures and the Service-Oriented Architecture Paradigm}}},
doi = {{10.1007/978-3-540-78550-7_5}},
year = {{2007}},
}
@article{2519,
author = {{Stiebing, Achim and Weyland, Gerd}},
journal = {{Fleischwirtschaft}},
number = {{7}},
pages = {{21 -- 23}},
title = {{{Was ist erlaubt, was verboten? : 2. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2006 - Teil 1}}},
volume = {{86}},
year = {{2007}},
}
@article{2520,
author = {{Stiebing, Achim and Weyland, Gerd}},
journal = {{Fleischwirtschaft}},
number = {{8}},
pages = {{35 -- 40}},
title = {{{Was ist erlaubt, was verboten? : 2. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2006 - Teil 2}}},
volume = {{86}},
year = {{2007}},
}
@article{2521,
author = {{Stiebing, Achim and Weyland, Gerd}},
journal = {{Fleischwirtschaft}},
number = {{9}},
pages = {{83 -- 86}},
title = {{{Was ist erlaubt, was verboten? : 2. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2006 - letzter Teil}}},
volume = {{86}},
year = {{2007}},
}
@article{2689,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
journal = {{to be submitted}},
title = {{{The use of Singular Value Decomposition in Sensitivity Analysis and Mesh Optimization}}},
year = {{2007}},
}
@inproceedings{3992,
author = {{Kutz, Gerd}},
location = {{Moskau (Russland)}},
title = {{{Emulsification by rotor/stator- and rotor/systems}}},
year = {{2007}},
}
@inbook{3995,
author = {{Kutz, Gerd and Wolff, A.}},
booktitle = {{Pharmazeutische Produkte und Verfahren}},
editor = {{Kutz, Gerd and Wolff, Armin }},
isbn = {{978-3-527-31222-1}},
pages = {{1--4}},
publisher = {{WILEY-VCH}},
title = {{{Einführung}}},
doi = {{10.1002/9783527611133.ch1}},
year = {{2007}},
}
@inproceedings{4034,
author = {{Kutz, Gerd}},
location = {{Moskau ( Russland)}},
title = {{{Skin care formulations - from scratch to current applications}}},
year = {{2007}},
}
@inproceedings{4037,
author = {{Bödeker, A. and Bensmann, H. and Kutz, Gerd}},
location = {{Nürnberg}},
title = {{{Qualification of a packaging line for cylindrical containers and blister packs}}},
year = {{2007}},
}
@inproceedings{4038,
author = {{Kutz, Gerd}},
location = {{Basel (Schweiz)}},
title = {{{Formulierungskonzepte für Emulsionen - ausgewählte Beispiele}}},
year = {{2007}},
}
@inproceedings{4055,
abstract = {{Electric drives are growing in importance in automotive applications, especially in hybrid electric vehicles (HEV) and in the vehicle dynamics area (steering systems, etc.). The challenges of real-time hardware-in-the-loop (HIL) simulation and testing of electric drives are addressed in this paper. In general, three different interface levels between the electric drive and the hardware-inthe-loop system can be distinguished: the signal level (1), the electrical level (2) and the mechanical level (3). These interface levels, as well as modeling and I/O-related aspects of electric drives and power electronics devices, are discussed in detail in the paper. Finally, different solutions based on dSPACE simulator technology are presented, for both hybrid vehicle and steering applications.}},
author = {{Schulte, Thomas and Wagener, Andreas and Wältermann, Peter and Schütte, Herbert}},
title = {{{Hardware-in-the-Loop Test Systems for Electric Motors in Advanced Powertrain Applications}}},
year = {{2007}},
}
@inbook{4056,
abstract = {{Hybridantriebe erweitern die bestehen Antirebstechnologien um eistungsfähige elektrische Maschinen und Speichervorrichtungen in verschiedenen Konfigurationen. Diese zusätzitchen Komponenten erhöhen Freiheitsgrade des gesamten Systems führen zu einer komplexen Verteilung auf mehrere Steuergeräte. Um dieser angestiegenen Komplexitat Rechnung zu tragen, muss die Entwicklungsumgebung sprechend angepasst werden. Hardware-in-the-Loop(HIL)Simulation ist im Entwicklungsprozess für einzelne Steuergeräte wle auch für den Test von Verbundsystemen eine etablierte Testmethode. Allerdings unterscheiden sich die Anforderungen an HIL Simulatoren für den Test von Steuergeräten für elektrische Antriebe deutlich von denen für z. B. Verbrennungsmotoren. Die Regelung eines elektrischen Antriebs erfordert eine signifikant höhere Echtzeitdynamlk, da diese mit 5 bis 20 kHz berechnet werden. Für die Echtzeitsimulation der elektrischen Mahschine ist somit eine optimierte I/O Schnittstelle entscheidend, die auf die spezifische Signale der Anwendung und das eingesetzte Echtzeit-Modell optimiert ist. Die Testumgebung muss für einen Verbund Steuergeräten ausgelegt werden, wobei diese entweder direkt angeschlossen oder simuliert werden.}},
author = {{Schulte, Thomas and Klahold, Jürgen and Wagener, Andreas}},
booktitle = {{Neue elektrische Antriebskonzepte für Hybridfahrzeuge}},
isbn = {{978-3-8169-2677-1}},
pages = {{388 -- 399}},
title = {{{Test elektrischer Antriebe für Hybridfahrzeuge mittels Hardware-in-the-Loop Simulation}}},
year = {{2007}},
}
@article{4144,
author = {{Austermann-Haun, Ute}},
issn = {{1866-0029}},
journal = {{KA Korrespondenz Abwasser Abfall}},
number = {{4}},
pages = {{348 -- 349}},
publisher = {{GFA}},
title = {{{Wasserversorgung, Abwasserreinigung und Abfallbehandlung in Jordanien : Jordan-German Experts Workshop on Water and Waste}}},
volume = {{54}},
year = {{2007}},
}
@misc{4146,
author = {{Austermann-Haun, Ute}},
pages = {{3}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Kurzbericht zum Projekt "Online-Messungen in Kleinkläranlagen zur Kontrolledes Schlammspiegels und Ablaufs"}}},
year = {{2007}},
}
@misc{4148,
author = {{Austermann-Haun, Ute}},
pages = {{41}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Online-Messungen in Kleinkläranlagen zur Kontrolle des Schlammspiegels und Ablaufs}}},
year = {{2007}},
}
@misc{4150,
author = {{Austermann-Haun, Ute and Majcan, Mirko}},
publisher = {{Ministerium für Umwelt und Naturschutz, Landwirtschaft und Verbraucherschutz des Landes NRW}},
title = {{{Niederschlagswassereinleitungen in Gewässer - Erarbeitung eines Datenmodells -}}},
year = {{2007}},
}
@misc{4151,
author = {{Austermann-Haun, Ute}},
publisher = {{Ministerium für Umwelt und Naturschutz, Landwirtschaft und Verbraucherschutz des Landes NRW}},
title = {{{Kurzbericht zum Pilotprojekt "Niederschlagswassereinleitungen in Gewässer - Erarbeitung eines Datenmodells"}}},
year = {{2007}},
}
@inbook{4185,
author = {{Fettig, Joachim and Miethe, Manfred and Pick, Volker}},
booktitle = {{Chemical Water and Wastewater Treatment IX}},
editor = {{Hahn, Hermann H. and Hoffmann, Erhard and Hallvard, Odegard}},
pages = {{103--113}},
publisher = {{IWA Publishing}},
title = {{{Decentralised Treatment of Runoff from Traffic Areas – Principles and Practical Aspects}}},
doi = {{10.2166/9781780402079}},
year = {{2007}},
}
@article{470,
abstract = {{Im Rahmen des vom BMBF geförderten Projektes One Stop Services für die weltweite Produktion (Projektträger: DLR; Förderkennz. 01HQ0542) wurde die Arbeit von Beschäftigten, die Industriebauprojekte im Ausland leiten, untersucht,
um auf Grundlage der Ergebnisse der Arbeitsanalyse Maßnahmen zur Belastungsreduzierung zu erarbeiten.}},
author = {{Beuscher-Mackay, Sabine and Hinrichsen, Sven}},
issn = {{2193-7222 }},
journal = {{IAW-Spectrum / Lehrstuhl und Institut für Arbeitswissenschaft der RWTH Aachen }},
number = {{2}},
pages = {{1--3}},
publisher = {{Lehrstuhl und Inst. für Arbeitswiss. der RWTH Aachen}},
title = {{{Ergebnisse einer Arbeitsanalyse von Projektleitern aus der Fabrikplanungsbranche - One Stop Services für die weltweite Produktion}}},
volume = {{2}},
year = {{2007}},
}
@article{4725,
author = {{Jasperneite, Jürgen}},
journal = {{etz Elektrotechnik + Automation}},
pages = {{12--16}},
title = {{{Echtzeit-Ethernet - hohe Geschwindigkeit mit Profinet}}},
volume = {{12}},
year = {{2007}},
}
@inproceedings{4726,
author = {{Trsek, Henning and Jasperneite, Jürgen and Lessmann, Gunnar}},
booktitle = {{7th IFAC International Conference on Fieldbuses and nETworks in industrial and embedded systems}},
title = {{{A Concept for the System Integration of Wireless Sensor Networks to Industrial Automation Systems using PROFINET}}},
year = {{2007}},
}
@article{4727,
author = {{Jasperneite, Jürgen and Crocoll, Nora}},
journal = {{atp -Automatisierungstechnische Praxis }},
pages = {{26--28 (non--review)}},
title = {{{Leitfaden erleichtert den Einstieg }}},
volume = {{10}},
year = {{2007}},
}
@inproceedings{4728,
author = {{Schriegel, Sebastian and Jasperneite, Jürgen}},
booktitle = {{2007 International IEEE Symposium on Precision Clock Synchronization for Measurement, Control and Communication (ISPCS07)}},
publisher = {{(best paper award)}},
title = {{{Investigation of Industrial Environmental Influences on Clock sources and their Effect on the Synchronization Accuracy of IEEE1588}}},
year = {{2007}},
}
@inproceedings{4729,
author = {{Jasperneite, Jürgen and Schumacher, Markus and Weber, Karl}},
booktitle = {{12th IEEE Conference on Emerging Technologies and Factory Automation}},
pages = {{17 -- 27}},
title = {{{Limits of Increasing the Performance of Industrial Ethernet Protocols}}},
year = {{2007}},
}
@inproceedings{4730,
author = {{Trsek, Henning and Jasperneite, Jürgen}},
booktitle = {{Wireless Technologies Kongress 2007}},
editor = {{Wollert, Jörg F.}},
pages = {{78--85}},
title = {{{Drahtlose Sensor- und Aktornetze mit 802.15.4 in der Fertigungsautomatisierung - Utopie oder Wirklichkeit?}}},
year = {{2007}},
}
@article{4731,
author = {{Jasperneite, Jürgen and Gamper, Sergej}},
journal = {{Elektronik}},
pages = {{60--65}},
title = {{{Echtzeit-Betrieb im Ethernet - Industrial Ethernet Switches auf dem Prüfstand - Teil2}}},
volume = {{16}},
year = {{2007}},
}
@inbook{4733,
author = {{Jasperneite, Jürgen}},
booktitle = {{Maschinenbau und Metallbearbeitung Deutschland}},
publisher = {{Kuhn Fachverlag }},
title = {{{Industrial IT: Der Einfluß der Informationstechnologien auf die industrielle Kommunikation}}},
year = {{2007}},
}
@inproceedings{4734,
author = {{Trsek, Henning and Jasperneite, Jürgen}},
booktitle = {{VDI/VDE GMA-Kongress 2007}},
title = {{{Mobiles PROFINET mit schnellen Zellwechseln in großflächigen industriellen WLAN Netzwerken -Aktueller Stand und Perspektive}}},
year = {{2007}},
}
@article{4735,
author = {{Jasperneite, Jürgen and Gamper, Sergej}},
journal = {{Elektronik}},
pages = {{50--92}},
title = {{{Echtzeit-Betrieb im Ethernet - Industrial Ethernet Switches auf dem Prüfstand - Teil1}}},
volume = {{7}},
year = {{2007}},
}
@inproceedings{4736,
author = {{Trsek, Henning and Jasperneite, Jürgen}},
publisher = {{Vortrag 4. Fachwissenschaftliches Kolloquium für Angewandte Automatisierungstechnik in Lehre und Entwicklung an Fachhochschulen (AALE2007) in Lemgo}},
title = {{{Drahtlos vernetzte regelungstechnische Anwendungen}}},
year = {{2007}},
}
@misc{8175,
author = {{Oldenburg, Martin and Peter-Fröhlich , Anton and Dlabacs, Corina and Pawlowski, Ludwig and Bonhomme, Andre}},
booktitle = {{Water Science & Technology }},
number = {{5}},
pages = {{251--257}},
publisher = {{IWA}},
title = {{{EU Demonstration project for separate discharge and treatment of utine faeces and greywater - Part II: Cost comparsion of different sanitation systems }}},
volume = {{56}},
year = {{2007}},
}
@misc{8176,
author = {{Peter-Fröhliich, Anton and Pawlowski, Ludwig and Bonhomme, Andre and Oldenburg, Martin}},
booktitle = {{Water Science & Technology }},
number = {{5}},
pages = {{239--249}},
publisher = {{IWA}},
title = {{{EU Demonstration project for separate discharge and treatment of urine, faeces and greywater - Part I: Results}}},
volume = {{56}},
year = {{2007}},
}
@misc{8181,
author = {{Niederste-Hollenberg, Jutta and Oldenburg, Martin and Weilbeer, Jutta and Weissmann, Heike}},
booktitle = {{Hamburger Berichte zur Siedlungswasserwirtschaft TU}},
editor = {{Meinzinger, F. and Otterpohl, R.}},
location = {{Lübeck}},
pages = {{139--154}},
publisher = {{TU Hamburg-Harburg}},
title = {{{Die Vorklärung als Kohlenstoffsenke - ein Problem?}}},
year = {{2007}},
}
@book{8200,
author = {{Knepper-Bartel, Yvonne-Christin}},
publisher = {{Forschungsgesellschaft Landschaftsentwicklung Landschaftsbau e. V. (FLL)}},
title = {{{Fachbericht zu Planung, Bau und Instandhaltung von Wassergebundenen Wegen}}},
year = {{2007}},
}
@misc{8257,
author = {{Höing, M. and Helmig, K. and Meier, Uwe}},
booktitle = {{Wireless Automation 2007, 28.02. - 01.03.2007, Magdeburg}},
publisher = {{Wireless Automation}},
title = {{{Bluetooth ungestört - Erprobungstests der Bluetooth-Technologie am Beispiel eines industriellen Sensor-Aktor-Systems}}},
year = {{2007}},
}
@misc{8258,
author = {{Pott, T. and Tobergte, M. and Helmig, K. and Meier, Uwe}},
booktitle = {{Elektronik-Wireless 1, April 2007}},
publisher = {{Elektronik}},
title = {{{Gehäuseintegrierte Antennen für drahtlose SAI-Module - Optimaler Entwurf symmetrischer und unsymmetrischer Antennen}}},
year = {{2007}},
}
@misc{8260,
author = {{Helmig, K. and Michels, J. S. and Meier, Uwe}},
booktitle = {{SPS/IPC/DRIVES, 27. - 29. November 2007, Nürnberg}},
publisher = {{SPS/IPC/DRIVES}},
title = {{{Untersuchung der funktionalen Sicherheit eines Bluetooth-basierten Sensor-Aktor-Systems unter Echtzeitbedingungen}}},
year = {{2007}},
}
@misc{8261,
author = {{Höing, M. and Helmig, K. and Meier, Uwe}},
booktitle = {{Automatisierungstechnische Praxis, atp 49, 8/2007}},
publisher = {{Automatisierungstechnische Praxis - atp}},
title = {{{Funken mit Bluetooth - Untersuchungen zur Störfestigkeit und Übertragungssicherheit der Bluetooth-Technologie am Beispiel eines Weidmüller SAI-Moduls}}},
year = {{2007}},
}
@misc{8262,
author = {{Höing, M. and Helmig, K. and Meier, Uwe}},
booktitle = {{Elektrotechnik + Automation, etz, Heft S6, 11/2007}},
publisher = {{Elektrotechnik + Automation, etz}},
title = {{{Erprobungstests drahtloser Sensor-Aktor-Systeme in Industrieumfeld}}},
year = {{2007}},
}
@misc{8263,
author = {{Meier, Uwe and Ahmad, K. and Meier, Uwe}},
booktitle = {{3rd International IEEE Conference on Wireless Communications and Sensor Networks, December 13-15, 2007, Allahabad, India}},
publisher = {{IEEE Conference on Wireless Communications and Sensor Networks}},
title = {{{Performance Investigation and Optimization of Chirp Spread Spectrum Systems for Wireless Sensor Actuator Networks}}},
year = {{2007}},
}
@misc{9079,
author = {{Kaya, Hasan}},
publisher = {{Technische Hochschule Ostwestfalen-Lippe }},
title = {{{Thermisch- hygrische Verhältnisse in Wandkonstruktionen aus gängigen und nachhaltigen Baustoffen. Mit Verwendung des PC-Programms WUFI 2D zur Berechnung des gekoppelten Wärme- und Feuchtetransports in Bauteilen.}}},
year = {{2007}},
}
@misc{9446,
author = {{Wilhelm, Patrick}},
booktitle = {{Lebensmitteltechnik}},
issn = {{0047-4290}},
number = {{12}},
pages = {{30 -- 31}},
publisher = {{LT Food Medien-Verlag GmbH}},
title = {{{Rund 1.200 Besucher. Ein Bericht von der ProcessNet-Jahrestagung 2007 in Aachen.}}},
year = {{2007}},
}
@proceedings{9655,
editor = {{Pottgiesser, Uta}},
isbn = {{978-3-939349-04-4}},
pages = {{214}},
publisher = {{Hochschule OWL }},
title = {{{Fassade 2007 - internationale Fassaden : Jahresbericht des Forschungsschwerpunktes "Material und Gebäudehülle"}}},
year = {{2007}},
}
@book{2735,
abstract = {{Dieses Buch bietet einen umfassenden Überblick über die Anforderungen an pharmazeutische Produkte und Herstellungsverfahren. Es beschreibt detailliert die Prozesse, Produktionstechniken und -anlagen sowie die begleitenden Qualifizierungs- und Validierungsmaßnahmen.
}},
editor = {{Kutz, Gerd and Wolff, Armin}},
isbn = {{978-3-527-31222-1}},
pages = {{445}},
publisher = {{Wiley-VCH-Verl. }},
title = {{{Pharmazeutische Produkte und Verfahren}}},
doi = {{10.1002/9783527611133}},
year = {{2007}},
}
@misc{2814,
author = {{Pörtner, Ralf and Frahm, Björn and Lane, Paul and Munack, Axel and Kühn, Kathrin and Hass, Volker C.}},
booktitle = {{Cell Technology for Cell Products}},
isbn = {{978-1-402-05475-4}},
location = {{Harrogate, UK}},
pages = {{497--501}},
publisher = {{Springer}},
title = {{{Optimisation of Time-space-yield for Hybridoma fed-batch Cultures with an Adaptive Olfo-controller}}},
doi = {{10.1007/978-1-4020-5476-1_84}},
volume = {{vol. 3}},
year = {{2007}},
}
@article{2830,
author = {{Müller, Ulrich and Jordan, Volkmar and Triantafillaki, C.}},
journal = {{Chemie-Ingenieur-Technik}},
number = {{9}},
pages = {{1363}},
title = {{{Extraktion mit Mesophasen -Auswahl von geeigneten Emulgatoren zur Phytostoffgewinnung}}},
volume = {{79}},
year = {{2007}},
}
@article{2834,
author = {{Müller, Ulrich and Hein, Sven and Lilie, Markus and Wilhelm, Patrick}},
issn = {{1365-2621}},
journal = {{International Journal of Food Science and Technology}},
pages = {{190--193}},
publisher = {{WILEY-VCH Verlag GmbH & Co. KGaA}},
title = {{{Decontamination of spices by combining mechanical and thermal effects - an alternative approach for quality retention}}},
doi = {{10.1111/j.1365-2621.2006.01204.x}},
volume = {{42}},
year = {{2007}},
}
@book{2860,
editor = {{Gwildis, Frank and Vetter, Andreas}},
isbn = {{9783927224995}},
keywords = {{Bürgerbeteiligung, Bürgerwille, Freiraum, Landschaftsgestaltung, Landschaftspark, Mannheim, öffentlicher Raum, Planungskultur, Stadtentwicklung, Stadtkultur, Stadtlandschaft, Stadtprojekt, Stadtwandel, Strukturwandel, Wettbewerb}},
pages = {{156}},
publisher = {{Stadt Mannheim Dezernat für Planung Bauen Umweltschutz und Stadtentwicklung}},
title = {{{10/400 - 10 Jahre Stadtentwicklung, 400 Jahre Stadt Mannheim : Das Projektbuch zum Stadtjubiläum Mannheim 2007 ; [anlässlich der Ausstelung "10/400 - 10 Jahre Stadtentwicklung, 400 Jahre Stadt Mannheim" ... Ausstellungsdauer 26/05-12/08/07]}}},
year = {{2007}},
}
@book{2861,
editor = {{Vetter, Andreas}},
isbn = {{3887783174}},
keywords = {{Architectural firms, Architecture, Spanish, Architektur}},
pages = {{96}},
publisher = {{Spurbuchverlag}},
title = {{{RCR Arquitectes - Cristalizaciones/Kristallisierungen : [erschienen anläßlich der gleichnamigen Ausstellung in der Architekturgalerie am Weißen Hof, Stuttgart, vom 14. 02. - 01.04.2007]}}},
year = {{2007}},
}
@misc{2870,
abstract = {{The procedure for gassing of liquid for cell cultures, comprises exchanging of gas over immersed membrane surfaces like hoses, cylinders or modules, and controlling the gassing rate change of the gas concentration and/or pressure of the gas or gas mixture or gas component flowing into/out of the area within the membrane surface. The membrane surface represents any rotatingly oscillating movement in the liquid. The gassing rate, transfer efficiency, mixing time and/or shear stress are controlled by change of the movement like amplitude and the equivalent number of revolutions. The procedure for gassing of liquid for cell cultures, comprises exchanging of gas over immersed membrane surfaces like hoses, cylinders or modules, and controlling the gassing rate change of the gas concentration and/or pressure of the gas or gas mixture or gas component flowing into/out of the area within the membrane surface. The membrane surface represents any rotatingly oscillating movement in the liquid. The gassing rate, transfer efficiency, mixing time and/or shear stress are controlled by change of the movement like amplitude, the equivalent number of revolutions, acceleration of the membrane surface, the delay of the membrane surface, the interruption of the movement or discontinuity. The course of motion is not restricted to recurring samples. The material transfer is increased by mounting of immovable current interfering elements. The disturb of the current forms by the rotatingly oscillating movement of the membrane surfaces. The supply of the membrane surface is undertaken with the help of flexible hoses or turning seals for the supply and discharge of gas. The membrane surface is used for the production of micro-bubbles or gas bubbles in the liquid. Rotor arms rotate in one of the rotation directions curved around the drive shaft. An independent claim is included for a device for gassing of liquid for cell cultures. }},
author = {{Brod, Helmut and Frahm, Björn and Kauling, Jörg and Rose, Reinhold}},
title = {{{Procedure for gassing of liquid for cell cultures, comprises exchanging of gas over immersed membrane surfaces and controlling the gassing rate change of the gas concentration and/or pressure of the gas or gas mixture or gas component}}},
year = {{2007}},
}
@misc{2871,
abstract = {{Gegenstand der Erfindung ist ein um seine ortsfeste, bevorzugt vertikale Achse oszillatorischrotierend angetriebener Reaktor für bevorzugt biotechnologische und pharmazeutische Anwendungen. Mit seinen prozessintensivierenden Eigenschaften für das Mischen, das Suspendieren, den Gasstofftransport, die Wärmeübertragung, die Bestrahlung und die Partikelrückhaltung wird die Anwendbarkeit im großtechnischen Maßstab gewährleistet. Der ohne Wellenabdichtung auskommende Reaktor erlaubt eine steriltechnisch besonders robuste Produktion unter Verzicht auf eine Reinigung und Reinigungsvalidierung erfordert, wenn der Reaktor als Einwegreaktor ausgeführt ist. }},
author = {{Brod, Helmut and Frahm, Björn and Kauling, Jörg and Poggel, Martin and Rose, Reinhold and Schmidt, Sebastian }},
pages = {{56}},
title = {{{Verfahren und Vorrichtung zur Be- und Entgasung von Flüssigkeiten, insbesondere in der Biotechnologie und speziell von Zellkulturen}}},
year = {{2007}},
}
@misc{2909,
author = {{Brod, Helmut and Frahm, Björn and Kauling, Jörg}},
location = {{Würzburg, Germany}},
title = {{{Die dynamische Membranbegasung – ein Ansatz zur Intensivierung der Sauerstoffversorgung tierischer Zellkulturen}}},
year = {{2007}},
}
@misc{2910,
author = {{Brod, Helmut and Frahm, Björn and Kauling, Jörg}},
location = {{Osnabrück, Germany}},
title = {{{Die dynamische Membranbegasung – ein Ansatz zur Intensivierung der Sauerstoffversorgung tierischer Zellkulturen}}},
year = {{2007}},
}
@inproceedings{2937,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
location = {{Aussois}},
title = {{{Variational design sensitivity analysis in the context of structural optimization and configurational mechanics}}},
year = {{2007}},
}
@inproceedings{2938,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
location = {{Zurich}},
title = {{{On variational sensitivity analysis and changes in the material configuration}}},
year = {{2007}},
}
@inproceedings{2939,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
location = {{San Francisco}},
title = {{{Mesh optimization techniques based on variational design sensitivity analysis}}},
year = {{2007}},
}
@inproceedings{2940,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
location = {{Munich}},
title = {{{Aspects of variational settings in the material space}}},
year = {{2007}},
}
@misc{2967,
author = {{Frahm, Björn and Kirchner, S. and Rose, R. and Jenne, M. and Kauling, J. and Brod, H. and Jöris, K. and Wischniewski, M. and Langer, U. and Bödeker, B.}},
location = {{Leverkusen, Germany}},
title = {{{High cell density bioreactor cultivation by Dynamic Membrane Aeration (DMA)}}},
year = {{2007}},
}
@inproceedings{3156,
author = {{Austermann-Haun, Ute}},
location = {{Rida-Said-Center der Universität Damaskus, Syria}},
title = {{{Bemessung einer Belebungsanlage für 10.000 EW}}},
year = {{2007}},
}
@inproceedings{3157,
author = {{Austermann-Haun, Ute}},
location = {{Assiut University, Egypt}},
title = {{{Possibilities of Saving Water in the Industry – Potentials for Cost-Reduction through Internal Measures}}},
year = {{2007}},
}
@inproceedings{3253,
author = {{Austermann-Haun, Ute}},
location = {{Lüneburg}},
title = {{{Umgang mit Indirekteinleitern}}},
year = {{2007}},
}
@inproceedings{3254,
author = {{Austermann-Haun, Ute}},
location = {{Bielefeld}},
title = {{{Mein Weg zur Professorin – ein Erfahrungsbericht}}},
year = {{2007}},
}
@inproceedings{3255,
author = {{Austermann-Haun, Ute}},
location = {{Berlin}},
title = {{{Introduction to anaerobic wastewater treatment}}},
year = {{2007}},
}
@inproceedings{3476,
author = {{Dresselhaus, Dieter and Jungkind, Wilfried}},
booktitle = {{Innovationen systematisch gestalten: Beiträge zum Innovationskongress 2006}},
editor = {{Doleschal, Reinhard}},
publisher = {{Fachhochschule Lippe und Höxter, Institut für Kompetenzförderung}},
title = {{{Prozessorganisation - Ansätze zur Verbesserung der Prozessstabilität und der Effizienz im Unternehmen HORA}}},
year = {{2007}},
}
@article{3478,
author = {{Dresselhaus, Dieter and Jungkind, Wilfried}},
issn = {{0033-6874}},
journal = {{REFA-Nachrichten : für industrial engineering}},
number = {{1}},
pages = {{30 -- 36}},
publisher = {{REFA-Bundesverband}},
title = {{{Prozessreorganisation - Verbesserung von Prozessstabilität und Effizienz bei HORA}}},
year = {{2007}},
}
@article{3529,
author = {{Schneider, Jan and Orzinski, M. and Hunger, W.}},
isbn = {{1866-5195}},
issn = {{0723-1520}},
journal = {{BrewingScience }},
number = {{3/4}},
pages = {{55--59}},
publisher = {{Carl}},
title = {{{Determination of oxygen ingress and carbon dioxide loss through plastic bottles using permeation simulation with hydrogen}}},
volume = {{60}},
year = {{2007}},
}
@article{3582,
author = {{Riedl, Ulrich}},
journal = {{Studienarchiv Umweltgeschichte }},
number = {{12}},
pages = {{17 -- 25}},
title = {{{Rote Listen in der Naturschutz- und Planungspraxis in DDR und BRD}}},
year = {{2007}},
}
@proceedings{3594,
editor = {{Riedl, Ulrich}},
location = {{Höxter}},
title = {{{Die schöne Landschaft – ein essentielles Lebensmittel für maßvollen Genuss : Symposium zu Ehren von Professor Dr. Wolfgang Harfst am 15. Juni 2007 an der FH Lippe und Höxter}}},
volume = {{7}},
year = {{2007}},
}
@proceedings{3651,
editor = {{Song, Jian}},
isbn = {{978-3-00-020895-9}},
location = {{Lemgo}},
pages = {{115}},
publisher = {{Labor für Feinsystemtechnik, Fachhochschule Lippe und Höxter}},
title = {{{ Elektrische Steckverbindungen : Vortragstexte des 1. Symposium Connectors des VDI-Teutoburger Bezirksvereins e.V. und der Fachhochschule Lippe und Höxter, Lemgo, 2007 }}},
year = {{2007}},
}
@article{3660,
author = {{Song, Jian and Alberani, Alessandor}},
issn = {{0341-5589}},
journal = {{Elektronik-Praxis : Wissen, Impulse, Kontakte}},
number = {{19}},
pages = {{80 -- 83}},
publisher = {{Vogel Business Media}},
title = {{{Signale mit kleinen Strömen und Spannungen : Elektrische Eigenschaften von Steckverbindern pr\"ufen}}},
year = {{2007}},
}
@misc{3729,
author = {{Austermann-Haun, Ute and Herbst, H.}},
publisher = {{Institut für Siedlungswasserwirtschaft der RWTH Aachen und der Tuttahs & Meyer Ingenieurgesellschaft mbH Aachen}},
title = {{{Innovatives Betriebs- und Verfahrenskonzept zur energetischen Nutzung von kommunalem und industriellem Abwasser im Verbund – Machbarkeitsstudie}}},
year = {{2007}},
}
@misc{3753,
author = {{Austermann-Haun, Ute and Klaerding, Sebastian and Gniffke, Saskia and Fettig, Joachim and Pick, Volker}},
publisher = {{Ministerium für Umwelt und Naturschutz, Landwirtschaft und Verbraucherschutz des Landes Nordrhein-Westfalen}},
title = {{{„Konzeption der Bewirtschaftungsplanung – Teilbereich Punktquellen – zur Umsetzung der EG-Wasserrahmenrichtlinie am Beispiel des Flussgebiets der Werre“}}},
year = {{2007}},
}
@misc{3754,
author = {{Austermann-Haun, Ute and Brieskorn, Nadine}},
publisher = {{Ministerium für Umwelt und Naturschutz, Landwirtschaft und Verbraucherschutz des Landes Nordrhein-Westfalen}},
title = {{{Erfassung von Abwasser-IGL-Daten beim StUA Lippstadt, die im Zuständigkeitsbereich der Unteren Wasserbehörden liegen}}},
year = {{2007}},
}
@misc{3755,
author = {{Austermann-Haun, Ute and Kruse, B.}},
publisher = {{Ministerium für Umwelt und Naturschutz, Landwirtschaft und Verbraucherschutz des Landes Nordrhein-Westfalen}},
title = {{{Überarbeitung und Nacherhebung von Daten zur Abwasserbeseitigung beim Staatlichen Umweltamt Düsseldorf}}},
year = {{2007}},
}
@misc{3756,
author = {{Austermann-Haun, Ute and Yolci, Ferhat and Witte, H.}},
publisher = {{Ministerium für Umwelt und Naturschutz, Landwirtschaft und Verbraucherschutz des Landes Nordrhein-Westfalen}},
title = {{{Unterstützung der Unteren Wasserbehörden bei der Erfassung und Integration von Daten in D-E-A}}},
year = {{2007}},
}
@misc{3757,
author = {{Austermann-Haun, Ute and Hüpping, M.}},
publisher = {{Ministerium für Umwelt und Naturschutz, Landwirtschaft und Verbraucherschutz des Landes Nordrhein-Westfalen}},
title = {{{Online-Messungen in Kleinkläranlagen zur Kontrolle des Schlammspiegels und Ablaufs}}},
year = {{2007}},
}
@article{3861,
author = {{Riegel, Adrian and Horstmann, Sebastian and Stüttgen, Benjamin and Wittenstein, Kirsten}},
issn = {{0018-3822}},
journal = {{Die Holzbearbeitung}},
number = {{10}},
pages = {{86 -- 88}},
publisher = {{A.G.T.-Verlag}},
title = {{{Wohl temperiert. Temperaturmessungen bei Schmelzklebstoff- und mittels thermisch aktivierbaren Klebstoffapplikationen (Teil 2)}}},
volume = {{54}},
year = {{2007}},
}
@article{3863,
author = {{Riegel, Adrian and Horstmann, Sebastian}},
issn = {{0018-3792}},
journal = {{Holz-Zentralblatt}},
number = {{42}},
pages = {{1184}},
publisher = {{Holz-Zentralblatt-Verl.}},
title = {{{Funktionierende- Lieferketten werden immer wichtiger : Studenten aus aller Welt erlernen die 'Supply chain in furniture industry' an der Fachhochschule Lippe und Höxter}}},
volume = {{133}},
year = {{2007}},
}
@article{3865,
author = {{Riegel, Adrian and Hoffmeister, Hans-Werner}},
journal = {{DGfH aktuell}},
number = {{100}},
pages = {{2 -- 3}},
publisher = {{DGfH}},
title = {{{Rüstzeit- und Prozessoptimierung beim Ummanteln}}},
year = {{2007}},
}
@article{3867,
author = {{Riegel, Adrian and Hellmann, Torben}},
issn = {{0341-3659}},
journal = {{BM :Fachmagazin für Innenausbau, Möbel, Bauelemente}},
number = {{5}},
pages = {{120 -- 124}},
publisher = {{Vereinigte Fachverl.}},
title = {{{Gütebestimmung geschliffener Holzoberflächen : Gut geschliffen ist halb lackiert}}},
volume = {{62}},
year = {{2007}},
}
@book{5573,
author = {{Iseke, Anja}},
title = {{{Sozialkapitalbildung in Organisationen}}},
year = {{2007}},
}
@inbook{5929,
abstract = {{Zahlreiche Veröffentlichungen prognostizieren ein starkes Wachstum von Outsourcing. In diesem Zusammenhang wird zunehmend der Begriff "Kontraktlogistik" verwendet. Zu klären ist, ob es sich hierbei um etwas tatsächlich Neues handelt und wenn ja, welche Folgen zu berücksichtigen sind.}},
author = {{Boone, Nicholas}},
booktitle = {{Logistische Entscheidungsprobleme in der Praxis : Festschrift für Günther Diruf zum 65. Geburtstag}},
isbn = {{3-8244-8308-4}},
pages = {{205--231}},
publisher = {{Dt. Univ.-Verl.}},
title = {{{Marketing für Kontraktlogistik-Dienstleister}}},
year = {{2007}},
}
@book{5930,
abstract = {{Die wesentlichen Vor- und Nachteile dezentraler und zentraler Distributionssysteme sind hinlänglich bekannt. Der Servicevorteil eines dezentralen Systems mit kundennahen Lagern gegenüber zentralen Lagersystemen ist die kürzere Lieferzeit. Wegen der geringeren Entfernungen werden zudem Auslieferungskosten eingespart. Nachteilig sind die verglichen mit Zentrallagersystemen erheblich höheren Bestände. In den letzten Jahren sind in der Distributionslogistik starke Zentralisierungstendenzen zu beobachten. Zahlreiche Unternehmen richten Zentrallager ein oder verzichten vollständig auf eine eigene Bestandshaltung.}},
author = {{Boone, Nicholas}},
isbn = {{978-3831600632}},
publisher = {{Herbert Utz Verlag}},
title = {{{Vernetzung dezentraler Lagersysteme im Großhandel : Service- und Kostenoptimierung im Lagerverbund}}},
year = {{2007}},
}
@inproceedings{5935,
abstract = {{Oftmals wird festgestellt, daß die Gestaltung und Steuerung von Supply Chains vor dem Hintergrund "dynamischer Entwicklungen" in den Beschaffungs- und Absatzmärkten immer "komplexer" werde. Daher stoßen die traditionellen Logistiksysteme auch immer häufiger an ihre Grenzen. Als Lösung wird zunehmend postuliert, daß eine Selbststeuerung der logistischen Prozesse diese Komplexitätsprobleme lösen könne. Hierzu sollen Packstücke und Ladehilfsmittel durch neuere Informations- und Kommunikationstechnologien "intelligent" gemacht werden. Allerdings gehen die Potentiale bereits vorhandener Technologien und Methoden in der aktuellen Diskussion häufig unter. Daher sollen hier die Hoffnungen, die in die Selbststeuerung gesetzt werden, ebenso wie ihre Grenzen kritisch beleuchtet werden. Schlüsselwörter: RFID, Selbststeuerung, Intelligenz, Supply Chain.}},
author = {{Boone, Nicholas}},
booktitle = {{Innovationen systematisch gestalten : Beiträge zum Innovationskongress 2006}},
editor = {{Doleschal, Reinhard}},
isbn = {{978-3-940330-00-0 }},
pages = {{86 -- 94}},
publisher = {{FH Lippe und Höxter}},
title = {{{Intelligente Selbststeuerung von Supply Chains Vision, Utopie oder Realität?}}},
volume = {{1}},
year = {{2007}},
}
@article{5936,
abstract = {{"Die Industrie vertreibt und distribuiert, der Handel kauft ein und der Logistikdienstleister transportiert" stimmt in vielen Handelssektoren nicht mehr. Tatsache ist, dass sich die Aufgabenverteilung in Handelsketten und damit verbunden einige Grundeinstellungen in den letzten Jahren massiv verändert haben. Ehemals selbst erbrachte Leistungen werden ausgelagert. Gleichzeitig werden zusätzliche Leistungen von anderen Supply-Chain-Akteuren übernommen.}},
author = {{Boone, Nicholas}},
journal = {{logo - das FIEGE-Magazin}},
number = {{4}},
pages = {{4 -- 6}},
title = {{{Stellt der Handel die Logistik auf den Kopf?}}},
volume = {{63}},
year = {{2007}},
}
@inbook{5968,
author = {{Nether, Ulrich}},
booktitle = {{ denk.werkstatt 2001 : phänomen.wand}},
editor = {{Olhauser, Gerd and Schricker, Rudolf}},
isbn = {{9783939855033 }},
publisher = {{Resopal Verlag}},
title = {{{Architektur-Wände}}},
year = {{2007}},
}
@inproceedings{6110,
author = {{Lilie, M. and Pfaff, R. and Wilhelm, Patrick and Müller, Ulrich}},
location = {{Zürich}},
title = {{{Haftkraftuntersuchungen an bakteriellen Sporen mittels eines Vakuum-Druck-Vakuum-Verfahrens am Beispiel von Bacillus spp.}}},
year = {{2007}},
}
@inproceedings{6111,
author = {{Müller, Ulrich and Lilie, M. and Wilhelm, Patrick}},
location = {{Bremerhaven}},
title = {{{Thermisch-letale Effekte und mechanische Ablösung bei der mechanischen Sattdampfentkeimung}}},
year = {{2007}},
}
@inproceedings{6112,
author = {{Triantafillaki, C. and Müller, Ulrich and Jordan, V.}},
location = {{Bremerhaven}},
title = {{{Extraktion mit Mesophasen – Das Potential von Emulgatoren zur Phytostoffgewinnung}}},
year = {{2007}},
}
@inproceedings{6113,
author = {{Triantafillaki, C. and Müller, Ulrich and Jordan, V.}},
location = {{Würzburg}},
title = {{{Extraktion von kosmetisch interessanten Wirkstoffen aus Pflanzen mittels Mesophasen}}},
year = {{2007}},
}
@inproceedings{6114,
author = {{Lilie, M. and Müller, Ulrich and Walhorn, V. and Ross, R. and Anselmetti, D. and Friehs, K. and Flaschel, E.}},
location = {{Hamburg}},
title = {{{Haftkraftuntersuchungen an bakteriellen.Sporen von Bacillus spp. in Luft und Wasser mittels Rasterkraftmikroskopie (AFM)}}},
year = {{2007}},
}
@inproceedings{6115,
author = {{Triantafillaki, C. and Müller, Ulrich and Jordan, V.}},
location = {{Hamburg}},
title = {{{Extraktion mit Mesophasen – Auswahl von geeigneten Emulgatoren zur Phytostoffgewinnung}}},
year = {{2007}},
}
@inproceedings{6116,
author = {{Müller, Ulrich and Triantafillaki, C. and Jordan, V.}},
location = {{Aachen}},
title = {{{Extraktion mit Mesophasen – Auswahl geeigneter Emulgatoren zur Phytostoffgewinnung}}},
year = {{2007}},
}
@inproceedings{6117,
author = {{Müller, Ulrich}},
location = {{Lemgo}},
title = {{{Entkeimungsverfahren fester Substanzen – Eine kurze Übersicht}}},
year = {{2007}},
}
@article{6203,
author = {{Lilie, M. and Hein, S. and Wilhelm, P. and Müller, Ulrich}},
journal = {{International Journal of Food Science and Technology}},
pages = {{190--193}},
title = {{{Decontamination of Spices by Combining Mechanical and Thermal Effects – An Alternative Approach For Quality Retention}}},
volume = {{42}},
year = {{2007}},
}
@article{6204,
author = {{Müller, Ulrich and Triantafillaki, C. and Jordan, V.}},
journal = {{Chem.-Ing.-Tech.}},
number = {{9}},
pages = {{1363}},
title = {{{Extraktion mit Mesophasen – Auswahl geeigneter Emulgatoren zur Phytostoffgewinnung}}},
volume = {{79}},
year = {{2007}},
}
@article{6244,
author = {{Song, Jian and Alberani, A.}},
journal = {{Elektronik-Praxis}},
number = {{Oktober}},
title = {{{Elektrische Eigenschaften von Steckverbindungen prüfen - Wann und wie die Widerstandsveränderung durch Fritten auftritt}}},
year = {{2007}},
}
@proceedings{6266,
editor = {{Song, Jian}},
title = {{{Herausforderung Steckverbindungen}}},
year = {{2007}},
}
@proceedings{6267,
editor = {{Song, Jian and Alberani, A. and Li, Z.}},
title = {{{Funktionstüchtigkeit von Steckverbindungen bei kleinen Strömen und Spannungen}}},
year = {{2007}},
}
@inproceedings{6268,
author = {{Song, Jian}},
title = {{{Materialauswahl für Steckverbinder – Metall vs. Kunststoff}}},
year = {{2007}},
}
@inproceedings{6269,
author = {{Song, Jian}},
booktitle = {{Conference Proceedings, ASME/STLE-IJCT}},
title = {{{Wear of Electric Contact Surfaces}}},
year = {{2007}},
}
@proceedings{6270,
editor = {{Song, Jian}},
location = {{Chemnitz}},
title = {{{Verschleißeigenschaften von Kunststoffgleitlagern in Heavy-Duty-Umgebungen}}},
year = {{2007}},
}
@misc{10153,
abstract = {{This paper deals with a performance evaluation of a Bluetooth based industrial real-time sensor actuator interface for stationary and mobile applications. The investigations were carried out in harsh industrial environments in the presence of parasitic machine emissions, intentional and unintentional interferers. The air paths were obstructed by moving machine parts and daily work traffic. As a result we can conclude, that wireless automation systems based on Bluetooth technology are extremely reliable due to their inherent system features like adaptive frequency hopping at high operating frequencies, error detection and correction. Neither parasitic machine emissions nor other radio systems or transceiver movements can impair the transmission, as long as distances are below 30 m}},
author = {{Meier, Uwe and Witte, Stefan and Helmig, Kai and Höing, Michael and Schnückel, Markus and Krause, Herrmann}},
booktitle = {{12th IEEE Conference in Emerging Technologies and Factory Automation (ETFA 2007 Proceedings)}},
isbn = {{978-1-4244-0825-2 }},
keywords = {{Bluetooth, mobile communication, performance evaluation, telecommunication traffic}},
location = {{Patras, Greece}},
pages = {{33--37}},
publisher = {{IEEE}},
title = {{{Performance Evaluation and Prediction of a Bluetooth Based Real-Time Sensor Actuator System in Harsh Industrial Environments}}},
doi = {{10.1109/EFTA.2007.4416750}},
year = {{2007}},
}
@techreport{10180,
author = {{Witte, Stefan and Sander, C. and Steffan, H. }},
publisher = {{nn}},
title = {{{Breitbandige drahtlose Netzzugänge in ländlichen Gebieten}}},
year = {{2007}},
}
@article{476,
abstract = {{echnische Optimierungen zur Verbesserung der wirtschaftlichen Situationen von produzierenden Unternehmen im Mittelstand sind weitgehend ausgereizt. Die Haupthandlungsfelder sind im organisatorischen und personellen Bereich zu sehen, also im Feld des 'Industrial Engineering'. Für diesen Bereich werden Führungskräfte in produzierenden Unternehmen bzw. Entscheidungsträger auch heute noch immer zu wenig sensibilisiert und ausgebildet. Prozessinnovationen lassen sich nur nachhaltig einführen, wenn die 'Machtpromotoren' (Geschäftsführung in KMU) voll dahinter stehen. Außerdem sollen die am Veränderungsprozess Beteiligten Unternehmen besuchen, in denen 'Bestpractice-Beispiele' zu sehen sind (z.B. im Rahmen der TOP-Initiative des Bundesministeriums für Wirtschaft und Technologie und des F.A.Z.- Instituts oder der Initiative OWL-Maschinenbau). Erhebliche Defizite liegen im methodischen Knowhow vor (systematisches Aufdecken und Quantifizieren von Potenzialen, Einbindung der Reorganisationsaktivitäten in ein Gesamtkonzept, fehlende Hilfsmittel usw.). Hier ist eine Grobstruktur hilfreich, um Maßnahmen einordnen und fokussieren zu können. Reorganisationsvorhaben sollten auf den beiden unteren Gestaltungsebenen begonnen werden. Dort können eine große Anzahl von Mitarbeitern einbezogen und Auswirkungen von durchgeführten Maßnahmen besonders deutlich gemacht werden. Dies führt zu einer hohen Identifikation mit den Maßnahmen. Auch bestehen hier gute Chancen, dass sich daraus ein 'kontinuierlicher Verbesserungsprozess' entwickelt. Reorganisationsmaßnahmen haben erfahrungsgemäß nur dann nachhaltige positive Auswirkungen, wenn auch die beiden oberen Ebenen nach bearbeitet werden. Dies bedeutet, dass sich die Geschäftsführung - für alle deutlich und nachvollziehbar - Gedanken über die Zukunft des Unternehmens macht und dies kommunizieren muss. Solche strategischen Aussagen, verbunden mit für alle verständlichen Zielen, haben vor allem auf die nächste Ebene, die Aufbau- und Ablauforganisation, unmittelbare Auswirkungen. Die notwendige Kunden- und Prozessorientierung ist der Maßstab für eine Untersuchung der wesentlichen Abläufe in der Auftragsabwicklung. Hier kann mit ähnlichen Methoden und Hilfsmitteln herangegangen werden wie bei der Analyse der Abläufe in der Produktion. Leider sind Veränderungen in diesem Bereich nicht so sichtbar wie in den Produktionsbereichen. Hier ist es notwendig, dass sehr viel kommuniziert wird. Der Gesamtrationalisierungseffekt kann für ein mittelständisches Unternehmen (100 bis 200 Mitarbeiter) zwischen 500 000 bis 800 000 Euro pro Jahr liegen. Wie die Beispiele zeigen, handelt es sich um Maßnahmen mit geringen Investitionen, so dass die Amortisationszeiträume innerhalb des Einjahresbereiches liegen dürften.}},
author = {{Dresselhaus, Dieter and Jungkind, Wilfried}},
issn = {{ 0033-6874 }},
journal = {{REFA-Nachrichten}},
keywords = {{Geschäftsprozess-Reengineering, KMU (Klein- und Mittelbetriebe), Verantwortlichkeitsbereich, Innovationsmanagement, Zielsetzung, Aufbauorganisation, Ablauforganisation, innerbetrieblicher Kommunikationsweg, Motivation}},
number = {{1}},
pages = {{30--36}},
publisher = {{ REFA-Bundesverband }},
title = {{{Prozessreorganisation. Verbesserung von Prozessstabilität und Effizienz bei HORA }}},
volume = {{60}},
year = {{2007}},
}
@inbook{4765,
abstract = {{This book gives an introduction and overview of the field of Pervasive Gaming, an emerging genre in which traditional, real-world games are augmented with computing functionality, or, depending on the perspective, purely virtual computer entertainment is brought back to the real world. We try to both inform about the developments and influential works in the fi eld of Pervasive Games, and also help laying the foundation for shaping the future of this application domain. Consequently, we focus on concepts and theoretical works that help understanding and sharpening the rationale behind the field (the "what") as well as on technological means of actually realizing working prototypes of Pervasive Games (the "how"). Both perspectives have their right and need to go hand in hand. The first four of the twelve chapters contributed by leading experts in the fi eld address the theoretical foundations. The individual authors' views sometimes complement each other, sometimes they express similar ideas and concepts, and sometimes they even contradict each other severely. Since we are currently far from having established a common ground about what this emerging genre clearly defi nes and separates from related fields, we suggest treating the individual chapters with equal respect and being prepared to contribute to the fi eld with one's own thoughts and ideas that might help further shape and clarify the important issues of Pervasive Games.}},
author = {{Magerkurth, Carsten and Röcker, Carsten}},
booktitle = {{A reader for pervasive gaming research ; Vol. 1., Concepts and technologies for pervasive games }},
isbn = {{978-3-8322-6223-5}},
keywords = {{Pervasive Gaming Applications, User Interfaces, Smart Home Environments, Mixed Reality}},
publisher = {{Shaker}},
title = {{{Towards the Emergence of a New Application Domain}}},
volume = {{5-9}},
year = {{2007}},
}
@inbook{4766,
abstract = {{This chapter presents a formative multi-method evaluation on future gaming systems. Following a scenario-driven approach, quantitative and qualitative methods are employed to elicit feedback from different target user populations. Based on the results of the different evaluation parts, a set of design requirements for future home entertainment systems is derived.}},
author = {{Röcker, Carsten and Magerkurth, Carsten and Hinske, Steve and Lampe, Matthias}},
booktitle = {{A reader for pervasive gaming research / Vol. 2. Pervasive gaming applications}},
isbn = {{978-3-8322-6224-2}},
keywords = {{User Interfaces, Pervasive Games, Evaluation, Human Computer Interaction, User Requirements, Design Guidelines, Interface Design}},
publisher = {{Shaker}},
title = {{{Designing User-Friendly Interfaces for Pervasive Gaming Applications}}},
volume = {{67-83}},
year = {{2007}},
}
@inproceedings{4767,
abstract = {{This paper presents a novel concept for personalized privacy support on large public displays. In a first step, a formative evaluation was conducted in order to analyze the requirements of potential users regarding the protection of private information on large public displays. The insights gained in this evaluation were used to design a system, which automatically adapts the information visible on public displays according to the current social situation and the individual privacy preferences of the user working on the display. The developed system was evaluated regarding its appropriateness for daily usage and its usefulness to protect privacy.}},
author = {{Röcker, Carsten and Hinske, Steve and Magerkurth, Carsten}},
booktitle = {{Universal Access in Human-Computer Interaction : Ambient Interaction}},
editor = {{Stephanidis, Constantine}},
isbn = {{978-3-540-73280-8}},
keywords = {{Large Public Displays, Intelligent Privacy Support, Smart Environments, Privacy-Enhancing Technologies, Context-Adapted Information Representation, Evaluation}},
pages = {{198--207}},
publisher = {{Springer}},
title = {{{Intelligent Privacy Support for Large Public Displays}}},
doi = {{10.1007/978-3-540-73281-5_21}},
volume = {{4555}},
year = {{2007}},
}
@inproceedings{4768,
abstract = {{Several evaluations of team awareness systems showed, that interruptions and privacy violations during usage often lead to the rejection of the system by users. Most authors argue that this rejection is due to a fundamental dual trade-off between sending awareness information and privacy, and between receiving awareness information and disruption or resource consumption. While the assumption of a fundamental trade-off is widely accepted in state-of-the-art research, this paper disputes the predominant hypothesis. Instead, it is argued, that the trade-off is not of fundamental nature, but caused by neglecting elementary aspects in the design process. In order to verify this line of argument, a novel interface concept for mediating socio-emotional awareness information is presented. To verify the validity of the conceptual approach, several evaluations were conducted. The evaluations verified the approach of this paper and showed, that a cautious interface design can enhance user privacy in multi-user awareness systems and minimize disruptive effects on primary tasks, without reducing awareness mediation and usability.}},
author = {{Röcker, Carsten and Magerkurth, Carsten}},
booktitle = {{Universal Acess in Human Computer Interaction : Coping with Diversity}},
editor = {{Stephanidis, Constantine}},
isbn = {{978-3-540-73278-5}},
keywords = {{Privacy, Interruptions, Team Awareness Systems, Dual Trade-Off : Evaluation}},
location = {{Beijing, China}},
pages = {{273--283}},
publisher = {{Springer}},
title = {{{Privacy and Interruptions in Team Awareness Systems}}},
doi = {{10.1007/978-3-540-73279-2_31}},
volume = {{4554}},
year = {{2007}},
}
@inproceedings{4769,
abstract = {{In this paper a music-based awareness system called 'Social Radio' is presented. The system focuses on small intimate groups and enables multiple persons to stay in touch using smart artifacts and tangible interaction mechanisms.}},
author = {{Etter, Richard and Röcker, Carsten}},
booktitle = {{Proceedings of the International Conference on Tangible and Embedded Interaction (TEI'07)}},
editor = {{Ullmer, Brygg and Schmidt, Albrecht}},
isbn = {{978-1-59593-619-6}},
keywords = {{Applied computing, Operations research, Human-centered computing, Human computer interaction (HCI)}},
location = {{Baton Rouge, Louisiana, USA}},
pages = {{11--12}},
publisher = {{ACM}},
title = {{{A Tangible User Interface for Multi-User Interaction}}},
doi = {{10.1145/1226969.1226972}},
year = {{2007}},
}
@inbook{477,
author = {{Gamber, Thilo Gerhard and Friedrich-Nishio, M.}},
booktitle = {{The Entrepreneurship-Innovation-Marketing Interface}},
editor = {{Würth, Reinhold and Gaul, W.}},
isbn = {{978-3-89929-120-9}},
pages = {{231--255}},
publisher = {{Swiridoff Verlag}},
title = {{{Analyse zur Verflechtung der Technik anhand von Verweisen zwischen Normungsdokumenten mit Hilfe der Datenbank Perinorm}}},
year = {{2007}},
}
@inproceedings{4770,
abstract = {{This paper presents a novel approach for mediating awareness in small intimate groups. Instead of traditional communication media, music is used to inform users about the presence and mood of multiple remote peers. Based on this conceptual idea, an awareness system called 'Social Radio' was developed. The system consists of several smart artifacts and an underlying multi-user communication infrastructure.}},
author = {{Röcker, Carsten and Etter, Richard}},
booktitle = {{Proceedings of the International Conferences on Intelligent User Interfaces (IUI’07)}},
isbn = {{1-59593-481-2 }},
keywords = {{Applied computing, Operations research, Human-centered computing, Human computer interaction (HCI)}},
location = {{Honolulu Hawaii USA }},
pages = {{286--289}},
publisher = {{ACM}},
title = {{{Social Radio – A Music-Based Approach to Emotional Awareness Mediation}}},
doi = {{10.1145/1216295.1216348}},
year = {{2007}},
}
@inbook{4771,
abstract = {{Pervasive Games have become popular in recent years. Their ambitious goal is to bring the computer into the world in order to augment existing games or to even come up with hitherto impossible or unthought-of forms of entertainment. This paper reflects on the various approaches to define what Pervasive Games consist of, how they relate to playing and games, and how different terms and views can be integrated. The paper contributes a unifying and integrating classification of the respective terms that relates different states of reality to the relevant dimensions and game elements.}},
author = {{Hinske, Steve and Lampe, Matthias and Magerkurth, Carsten and Röcker, Carsten}},
booktitle = {{A reader for pervasive gaming research / Vol. 1. Concepts and technologies for pervasive games}},
editor = {{Magerkurth, Carsten and Röcker, Carsten}},
isbn = {{978-3-8322-6223-5}},
keywords = {{Pervasive Gaming Applications, User Interfaces, Smart Home Environments, Mixed Reality}},
pages = {{11--38}},
title = {{{Classifying Pervasive Games: On Pervasive Computing and Mixed Reality}}},
year = {{2007}},
}
@inbook{4772,
abstract = {{Pervasive Gaming Applications; User Interfaces; Smart Home Environments; Novel Gaming Applications; Mixed Reality; Social and Physical Entertainment Systems; Augmented Reality Games; Design Aspects; Pervasive Multiplayer Game; Mapping; Exertion Interfaces; REXplorer; Pervasive Games; Socially Adaptable Games}},
author = {{Magerkurth, Carsten and Engelke, Timo and Röcker, Carsten}},
booktitle = {{A reader for pervasive gaming research / Vol. 2. Pervasive gaming applications}},
editor = {{Magerkurth, Carsten and Röcker, Carsten}},
isbn = {{978-3-8322-6223-5}},
keywords = {{Pervasive Gaming Applications, User Interfaces, Smart Home Environments, Mixed Reality}},
pages = {{85--106}},
publisher = {{Shaker}},
title = {{{Novel Gaming Applications for Smart Home Environments}}},
year = {{2007}},
}
@inbook{4773,
abstract = {{Welcome to the second volume of the reader on Pervasive Gaming Research! With this volume we focus mainly on actual implementations and prototypes of Pervasive Games. The foundations, both in technical and conceptual terms, were laid in the fi rst volume. Now, we apply these foundations to real Pervasive Games and explore the issues related to actually realizing such Pervasive Games. Clearly, the combination of virtual, physical, and social aspects in Pervasive Gaming contributes to a new complexity in game design, since games are no longer confi ned to the narrowness of a computer screen, but integrate with our real environments that consist of many things beyond our control.}},
author = {{Magerkurth, Carsten and Röcker, Carsten}},
booktitle = {{A reader for pervasive gaming research / Vol. 2. Pervasive gaming applications}},
editor = {{Magerkurth, Carsten and Röcker, Carsten}},
isbn = {{978-3-8322-6223-5}},
keywords = {{Pervasive Gaming Applications, User Interfaces, Smart Home Environments, Mixed Reality}},
pages = {{5--10}},
publisher = {{Shaker}},
title = {{{Prototyping Pervasive Games: A New Dimension of Complexity}}},
volume = {{5-10}},
year = {{2007}},
}
@inbook{4774,
abstract = {{The manifolds of spaces and places we are entering, populating, transiently crossing and eventually leaving (only to immerse in another subsequent context) as part of our daily activities in our personal, public and professional lives are undergoing a dramatic change. Although this change is taking place we are aware of it only in a limited fashion due to its unobtrusive character as illustrated in the statement by Streitz and Nixon (2005): “It seems like a paradox but it will soon become reality: The rate at which computers disappear will be matched by the rate at which information technology will increasingly permeate our environment and our lives”.}},
author = {{Streitz, Norbert and Prante, Thorsten and Röcker, Carsten and van Alphen, Daniel and Stenzel, Richard and Magerkurth, Carsten and Lahlou, Saadi and Nosulenko, Valery and Jegou, Francois and Sonder, Frank and Plewe, Daniela}},
booktitle = {{The Disappearing Computer : Interaction Design, System Infrastructures and Applications for Smart Environments}},
editor = {{Streitz, Norbert and Kameas, Achilles and Mavrommati, Irene}},
isbn = {{978-3-540-72725-5}},
keywords = {{Informal Communication, Local Mobility, Computer Support Cooperative Work, Smart Environment, Smart Space}},
pages = {{3--29}},
publisher = {{Springer}},
title = {{{Smart Artefacts as Affordances for Awareness in Distributed Teams}}},
doi = {{10.1007/978-3-540-72727-9_1}},
volume = {{4500}},
year = {{2007}},
}
@book{478,
author = {{Hinrichsen, Sven}},
isbn = {{978-3-8322-6636-3 }},
keywords = {{Einzelhandelsbetrieb, Dienstleistungsbetrieb, Industrial Engineering}},
pages = {{IV, 240}},
publisher = {{Shaker Verlag}},
title = {{{Arbeitsrationalisierung mittels Methoden des Industrial Engineering in Dienstleistungsbetrieben}}},
volume = {{2}},
year = {{2007}},
}
@misc{479,
author = {{Hinrichsen, Sven and Kopriwa, Nicole}},
booktitle = {{Lexikon Arbeitsgestaltung - Best Practice im Arbeitsprozess}},
editor = {{Landau, Kurt}},
isbn = {{978-3-87247-655-5}},
keywords = {{Arbeitsökonomie, Arbeitsstudium, Arbeitsrationalisierung}},
pages = {{207--209}},
publisher = {{Universum-Verlag}},
title = {{{Arbeitswirtschaft}}},
year = {{2007}},
}
@misc{480,
author = {{Hinrichsen, Sven and Peters, Meikel}},
booktitle = {{Lexikon Arbeitsgestaltung - Best Practice im Arbeitsprozess}},
editor = {{Landau, Kurt}},
isbn = {{978-3-87247-655-5}},
keywords = {{Kennzahlen, Berichtswesen, Controlling, Produktivitätsmanagement}},
pages = {{708--710}},
publisher = {{Universum-Verlag}},
title = {{{Kennzahlensysteme}}},
year = {{2007}},
}
@inproceedings{481,
author = {{Hinrichsen, Sven and Schlick, Christopher M.}},
booktitle = {{Kompetenzentwicklung in realen und virtuellen Arbeitssystemen. Bericht zum 53. Arbeitswissenschaftlichen Kongress}},
editor = {{Schäper, Michael}},
isbn = {{ 9783936804041 }},
location = {{Magdeburg}},
pages = {{401--404}},
publisher = {{GfA-Press}},
title = {{{Untersuchung von verkaufsvorbereitenden Arbeitsprozessen im Einzelhandel}}},
year = {{2007}},
}
@article{482,
abstract = {{Während in Deutschland die Kalkulation und Abrechnung von Projekten der Fabrikgebäudeplanung auf Grundlage der Honorarordnung für Architekten und Ingenieure (HOAI) erfolgt, werden im Ausland in der Regel Pauschalhonorare für einzelne Leistungen vereinbart. Ein deutscher Dienstleister, der im Ausland tätig werden will, muss also die Anzahl der voraussichtlich zu leistenden Arbeitsstunden von Projektleitern, Ingenieuren und Bauzeichnern valide abschätzen, um auf dieser Basis ein Angebot abgeben zu können. Da die Arbeit von Projektleitern und -Ingenieuren aber aufgrund der großen Anzahl von Projektbeteiligten durch ein hohes Maß an kommunikativen, koordinierenden und nicht planmäßig auftretenden Tätigkeiten sowie kurzfristig wechselnden Arbeitsbedingungen geprägt ist, ist es nicht zielführend, Zeitdaten auf Ebene von einzelnen Arbeitsverrichtungen zu ermitteln. Daher soll im Folgenden eine Methode vorgestellt werden, mit der über einen regressionsanalytischen Ansatz ein unternehmensspezifisches Modell zur Vorhersage der in einem Projekt oder in einer kompletten Projektleistungsphase voraussichtlich benötigten Arbeitsausführungszeiten entwickelt werden kann.}},
author = {{Hinrichsen, Sven and Schlick, Christopher M. and Steiger, Peter and Wurz, Hubert}},
issn = {{0033-6874}},
journal = {{REFA-Nachrichten}},
keywords = {{Regressionsanalyse, Prognosemodell, Projektabwicklung, Methodenentwicklung, Fabrikplanung}},
number = {{6}},
pages = {{4--11}},
title = {{{ Prognose von Arbeitsausführungszeiten in Fabrikplanungsprojekten }}},
volume = {{60}},
year = {{2007}},
}
@article{483,
author = {{Schlick, Christopher M. and Duckwitz, Sönke and Hinrichsen, Sven and Licht, Torsten}},
issn = {{0179-2679}},
journal = {{Industrie Management}},
number = {{6}},
pages = {{25--28}},
publisher = {{GITO-Verlag}},
title = {{{Komplexitätsbestimmung von Concurrent Engineering Projekten}}},
volume = {{23}},
year = {{2007}},
}
@inproceedings{484,
author = {{Zülch, Gert and Gamber, Thilo Gerhard and Stock, Patricia}},
booktitle = {{Simulation und Visualisierung 2007 (SimVis 2007)}},
editor = {{Schulze, T. and Preim, B. and Schumann, H.}},
location = {{Magedeburg}},
pages = {{97--110}},
publisher = {{SCS Publishing House}},
title = {{{Analyse von Entscheidungssystemen im Fertigungsbereich mittels Simulation}}},
year = {{2007}},
}
@inproceedings{486,
abstract = {{Growing market demands on enterprises and the resulting challenges for their organization have been discussed for many years now. The flexibilty and mutability of an enterprise are thereby considered as a significant factor for success.}},
author = {{Zülch, Gert and Gamber, Thilo Gerhard and Stock, Patricia}},
booktitle = {{Advances in Production Management Systems}},
editor = {{Olhager, Jan and Persson, Fredrik}},
isbn = {{978-0-387-74157-4}},
keywords = {{production planning and control, decision-making system, personnel-oriented simulation}},
location = {{Linköping}},
pages = {{337--344}},
publisher = {{Springer}},
title = {{{Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area}}},
year = {{2007}},
}
@book{487,
editor = {{Zülch, Gert and Stock, P. and Hrdina, J. and Gamber, Thilo Gerhard}},
isbn = {{978-3-00-021634-3 }},
location = {{Karlsruhe}},
pages = {{153}},
publisher = {{Ifab}},
title = {{{Erfolgsfaktor Arbeitszeit im Krankenhaus : Tagungsunterlagen zum Workshop im Rahmen des DFG-Projektes "Prozessoptimierung und effizienter Personaleinsatz im Krankenhausbereich - Gestaltung flexibler Arbeitszeitmodelle mit Hilfe der personalorientierten Simulation"}}},
year = {{2007}},
}
@misc{4942,
author = {{Vetter, Andreas}},
publisher = {{LBS Baden-Württemberg}},
title = {{{Architekturförderpreis 2007}}},
year = {{2007}},
}
@misc{4943,
author = {{Vetter, Andreas}},
publisher = {{Landesvertretung von Baden-Württemberg}},
title = {{{Architekturförderpreis 2007}}},
year = {{2007}},
}
@misc{4962,
author = {{Vetter, Andreas}},
publisher = {{Architekturgalerie am Weißenhof}},
title = {{{RCR Arquitectes (Olot) - Cristalizaciones/Kristallisierungen}}},
year = {{2007}},
}
@misc{4963,
author = {{Vetter, Andreas}},
publisher = {{Architekturgalerie am Weißenhof}},
title = {{{GTL Gnüchtel Triebswetter Landschaftarchitekten, Kassel}}},
year = {{2007}},
}
@misc{4965,
author = {{Vetter, Andreas}},
publisher = {{Architekturgalerie am Weißenhof}},
title = {{{Der Deutsche Werkbund als Bauherr - Breslau 1929/2007}}},
year = {{2007}},
}
@misc{4966,
author = {{Vetter, Andreas}},
publisher = {{Architekturgalerie am Weißenhof}},
title = {{{BUNKER_ADAPTION, Realarchitektur Berlin}}},
year = {{2007}},
}
@inproceedings{499,
author = {{Hinrichsen, Sven and Schlick, Christopher M.}},
booktitle = {{Proceedings of the 2007 Industrial Engineering Research Conference}},
editor = {{Lin, W. and Son, Y. and Wysk, R.}},
location = {{Nashville}},
pages = {{1316--1321}},
title = {{{Optimization of Logistic Operating Processes in Retail Trade}}},
year = {{2007}},
}
@book{5160,
author = {{Pottgiesser, Uta}},
isbn = {{ 978-3-7705-4541-4 }},
keywords = {{Architekturzeichnung}},
pages = {{ 249}},
publisher = {{Wilhelm Fink GmbH & Co. Verlags-KG}},
title = {{{Architektur- und Plandarstellung }}},
year = {{2007}},
}
@book{5162,
author = {{Pottgiesser, Uta and Kesseler, Thomas and Breuer, Jörg and Wriedt, Verena}},
publisher = {{Wilhelm Fink GmbH & Co. Verlags-KG}},
title = {{{Architektur- und Plandarstellung}}},
year = {{2007}},
}
@book{5163,
author = {{Pottgiesser, Uta and König, Katharina}},
pages = {{256}},
publisher = {{Wilhelm Fink GmbH & Co. Verlags-KG}},
title = {{{Baukonstruktion : Ausbau}}},
year = {{2007}},
}
@inbook{5164,
author = {{Pottgiesser, Uta}},
booktitle = {{Entwurfs- und Konstruktionstafeln für Architekten / Holschemacher, K. [edit.]}},
publisher = {{Bauwerk}},
title = {{{Baukonstruktion : Innenausbau}}},
year = {{2007}},
}
@inproceedings{5167,
author = {{Pottgiesser, Uta}},
booktitle = {{ Fassade 2007 - internationale Fassaden. Jahresbericht des Forschungsschwerpunktes "Material und Gebäudehülle" }},
isbn = {{ 978-3-939349-04-4 }},
pages = {{113--120}},
publisher = {{ Hochschule OWL }},
title = {{{Einfach oder doppelt}}},
year = {{2007}},
}
@proceedings{5168,
editor = {{Pottgiesser, Uta and Knaack, Ulrich and Bilow, Marcel}},
title = {{{Fassade2007 : Internationale Fassaden: Tagungsband}}},
year = {{2007}},
}
@inbook{9762,
author = {{Stemmer, Boris}},
booktitle = {{GIS in der Stadt- und Landschaftsplanung}},
editor = {{Haustein, Nicole and Demel, Sabine}},
isbn = {{978-3-89117-162-2}},
publisher = {{Infosystem Planung, Univ. Kassel }},
title = {{{GIS-basierte 3D-Landschaftsvisualisierung mit VNS 2.5}}},
volume = {{164}},
year = {{2007}},
}
@article{642,
author = {{Kausch, Bernhard and Hinrichsen, Sven and Ebert, Kai and Schosnig, Rainer}},
issn = {{1439-4297}},
journal = {{MTM-aktuell: das MTM-Infomagazin}},
number = {{1}},
pages = {{17 -- 19}},
publisher = {{Dt. MTM-Vereinigung}},
title = {{{Produktivität in der Planung durch ergonomisch gestaltete Software verbessern - Beste Softwareergonomie bei TiCon®3}}},
volume = {{11}},
year = {{2006}},
}
@inbook{643,
abstract = {{System theories are closely connected to the development of individual branches of science. Thus, system-theoretical approaches can be found in numerous scientific fields like biology, ecology, pedagogy, business administration, organization theory, engineering science, and political science. System-theoretical realizations are integrated into the own scientific field - with the concept of the work system. The starting point of various system-theoretical developments was formed by the system-theoretical-cybernetic approach. This mathematical approach contributed, considerably, to the fact that the system idea is applied to a set of scientific subjects. Individual scientific fields, in turn, provided impulses for the advancement of system theories. Due to various system-theoretical realizations an overview of system theories and approaches - how it is given in the first part of this article - can, inevitably, be only one interpretation of the manifold literature. The depiction of individual system-theoretical approaches in the first part of this article orients itself primarily towards several branches of science. Thus, the socio-technical system approach originating from social psychology is introduced as it corresponds with its own conception of a work system. The theory of social systems - originating from sociology - provides several impulses for other scientific fields. As a result, the individual development stages of the theory of social systems are outlined. This theory and other branches of science like business administration in turn took up realizations from the evolution theory. For this reason, this theory -originating from biology - will also be explained. Furthermore, this part exemplifies how system-theoretical realizations were integrated into engineering science. The single system-theoretical approaches are constituted in conjunction with the appropriate idea of man in each case. This should help when comparing the individual approaches with the own normative requirement of designing work in a human and economic way. In another part of the article the work system concept is described in detail as an entry to the systematic analysis, common in ergonomic literature. This part deals with the term "work system", the components of a typical work system and its substantial reciprocal effects. The last part of the article is dedicated to the systematic design of work systems. First of all general strategies of work system design are explained. Subsequently, models and methods are presented, exemplarily, based on a level scheme for the systematical order of work-referred realizations. These models and methods are able to support a systematical proceeding with the anticipating and prospective work system design. These approaches and methods are the result of research projects which were accomplished by the Institute of Industrial Engineering and Ergonomics (IAW) and by the Research Institute for Operations Management (FIR) at the RWTH Aachen. The exemplarily cited research results are supposed to show that the use of the work system approach is possible and reasonable on different levels of ergonomic research.}},
author = {{Luczak, Holger and Hinrichsen, Sven and Mütze-Niewöhner, Susanne}},
booktitle = {{Fundamentals and assessment tools for occupational ergonomics}},
editor = {{Marras, William S. and Karwowski, Waldemar}},
isbn = {{9780849319372}},
pages = {{5.1--5.52}},
publisher = {{CRC, Taylor & Francis}},
title = {{{Humans in Work System Environment}}},
year = {{2006}},
}
@inproceedings{6434,
author = {{Lilie, M. and Wilhelm, Patrick and Müller, Ulrich}},
location = {{Reinbek}},
title = {{{Energetische Betrachtungen zur Sattdampfentkeimung im fluidisierten Bett}}},
year = {{2006}},
}
@inproceedings{6435,
author = {{Rumke, T. and Wilhelm, Patrick and Müller, Ulrich and Lilie, M.}},
location = {{Reinbek}},
title = {{{Sattdampfentkeimung von Kamilleblüten unter Berücksichtigung qualitativer Aspekte}}},
year = {{2006}},
}
@inproceedings{6436,
author = {{Plassmeier, A. and Lilie, M. and Wilhelm, Patrick and Müller, Ulrich}},
keywords = {{Poster}},
location = {{Reinbek}},
title = {{{Das besondere Problem des ätherischen Öls bei der Sattdampfentkeimung von Majoran}}},
year = {{2006}},
}
@inproceedings{6437,
author = {{Müller, Ulrich}},
keywords = {{Dt. Sektion}},
location = {{Paderborn }},
title = {{{Integration von Trockenmischprozessen in eine Prozesskette}}},
year = {{2006}},
}
@inproceedings{6438,
author = {{Müller, Ulrich and Pahl, M.}},
keywords = {{Engl. Section}},
location = {{Paderborn}},
title = {{{Basic principles of dry blending}}},
year = {{2006}},
}
@inproceedings{6439,
author = {{Lilie, M. and Wilhelm, Patrick and Müller, Ulrich}},
keywords = {{Poster}},
location = {{Wiesbaden}},
title = {{{Anwendung der Flash-Verdampfung zur Entkeimung pflanzlicher Materialien}}},
year = {{2006}},
}
@inbook{644,
abstract = {{Der vorliegende Beitrag hat zum Ziel, die Anforderungen an ein Kennzahlensystem für Virtuelle Unternehmen zu systematisieren. Ferner wird ein Instrument vorgestellt, mit dem überprüft werden kann, inwieweit diese Anforderungen in Unternehmen auch umgesetzt werden. Die praktische Erprobung des Instruments wird anhand der Anwendung in einem Konsortium aus sieben Unternehmen der Luftfahrtindustrie dargestellt.}},
author = {{Peters, Meikel and Odenthal, Barbara and Hinrichsen, Sven and Schlick, Christopher}},
booktitle = {{Virtuelle Organisation und Neue Medien 2006 }},
editor = {{Meißner, Klaus and Engelien, Martin}},
isbn = {{3-938863-77-3}},
pages = {{218--230}},
publisher = {{TUDpress}},
title = {{{Kennzahlensysteme in Virtuellen Unternehmen der Luftfahrtzulieferindustrie}}},
year = {{2006}},
}
@inproceedings{6440,
author = {{Lilie, M. and Wilhelm, Patrick and Müller, Ulrich}},
location = {{Bernburg}},
title = {{{Anwendung der Flash-Verdampfung zur Entkeimung pflanzlicher Materialien}}},
year = {{2006}},
}
@inproceedings{6441,
author = {{Müller, Ulrich and Triantafillaki, C. and Jordan, V.}},
location = {{Berburg}},
title = {{{Gewinnung pflanzlicher Substanzen durch Mesophasen von Emulgatoren}}},
year = {{2006}},
}
@inproceedings{6442,
author = {{Müller, Ulrich}},
location = {{Lemgo}},
title = {{{VDI 4066 - Ziele einer neuen Richtlinie zur Abfüllung von flüssigen und pastösen Lebensmitteln – Grundlagen und Auslegungskriterien}}},
year = {{2006}},
}
@inproceedings{6443,
author = {{Lilie, M. and Loskand, B. and Wilhelm, Patrick and Müller, Ulrich}},
location = {{Lemgo}},
title = {{{Anlagenoptimierung bei der Vakuum-Druck-Vakuum-Behandlung von pflanzlichen Materialien}}},
year = {{2006}},
}
@inproceedings{6444,
author = {{Wilhelm, Patrick and Althoff, T. and Müller, Ulrich}},
location = {{Lemgo}},
title = {{{Der erste Online D- und z-Wert Katalog - Hilfsmittel für Forschung und Praxis}}},
year = {{2006}},
}
@inbook{645,
abstract = {{In dem Beitrag werden wesentliche Gestaltungsgrundsätze und wichtige Merkmalsausprägungen variabler Entgeltbestandteile dargestellt . Ferner wird eine Methode beschrieben, die den Prozess der Gestaltung und Einführung eines variablen Entgeltsystems wirksam unterstützt.}},
author = {{Rösler, Dirk and Hinrichsen, Sven}},
booktitle = {{ERA erfolgreich einführen - Methoden und Praxisbeispiele zum Entgeltrahmenabkommen}},
editor = {{Eyer, E.}},
isbn = {{3-936608-79-2}},
pages = {{47--77}},
publisher = {{Symposion}},
title = {{{Gestaltung variabler Entgeltsysteme}}},
year = {{2006}},
}
@article{646,
abstract = {{Ziel des Beitrags ist es, ein neues Multimoment-Schätzverfahren anhand eines Anwendungsbeispieles vorzustellen und dem bisherigen Verfahren gegenüberzustellen. Das neue Verfahren ermöglicht die schrittweise Schätzung von Anteilen der Ablaufarten ohne Rückgriffe, liefert auch bei kleinen Stichproben präzise Schätzwerte und kann a priori Informationen konsistent verarbeiten. Darüber hinaus wird durch die Visualisierung über sogenannte Wahrscheinlichkeitsdichtefunktionen eine zusätzliche Entscheidungsunterstützung für den Industrial Engineer im Unternehmen zur Verfügung gestellt.}},
author = {{Schlick, Christopher M. and Hinrichsen, Sven}},
issn = {{1434-1980}},
journal = {{Industrie-Management}},
number = {{5}},
pages = {{23 -- 26}},
publisher = {{GITO-Verlag}},
title = {{{Methode zur Schätzung und Visualisierung der Zeitanteile von Ablaufarten für industrielle Multimomentstudien}}},
volume = {{22}},
year = {{2006}},
}
@article{6555,
author = {{Ferreira, S. and Grosso-Silva, J.M. and Lohr, Mathias and Weihrauch, F. and Jödicke, R.}},
issn = {{1388-7890 }},
journal = {{International Journal of Odonatology }},
number = {{2}},
pages = {{133--150}},
publisher = {{Backhuys }},
title = {{{A critical checklist of the Odonata of Portugal}}},
volume = {{9}},
year = {{2006}},
}
@article{6837,
abstract = {{Derzeit erfolgt die Finanzierung des öffentlich-rechtlichen Rundfunks in Deutschland über von der Gebühreneinzugszentrale (GEZ) eingezogene Zwangsbeiträge, die sich am Besitz eines Empfangsgerätes orientieren. Am 19. Oktober 2006 wurde von den Ministerpräsidenten der Bundesländer die Ausweitung der GEZ-Gebühr auf internetfähige Computer beschlossen. Wie sollte eine optimale Bereitstellung und Finanzierung des öffentlich-rechtlichen Rundfunks aus finanzwissenschaftlicher Perspektive erfolgen?}},
author = {{von Blanckenburg, Korbinian and Hadamitzky, Andreas}},
issn = {{0043-6275 }},
journal = {{Wirtschaftsdienst : Zeitschrift für Wirtschaftspolitik}},
number = {{11}},
pages = {{729--734}},
publisher = {{ZBW}},
title = {{{Haushaltsabgabe statt Gerätegebühr: Eine Zukunft ohne GEZ?}}},
doi = {{10.1007/s10273-006-0586-9}},
volume = {{86}},
year = {{2006}},
}
@article{691,
author = {{Hinrichsen, Sven}},
issn = {{ 2193-7222 }},
journal = {{ IAW SPECTRUM}},
pages = {{5--6}},
publisher = {{Lehrstuhl und Institut für Arbeitswissenschaft der RWTH Aachen}},
title = {{{Arbeitsproduktivität im Handel systematisch steigern - Anwendung zeitwirtschaftlicher Methoden als Voraussetzung für produktive Arbeitsprozesse}}},
volume = {{1}},
year = {{2006}},
}
@misc{12059,
author = {{Kutz, Gerd and Bruns, Christina and Salzmann, Volker}},
location = {{Lyon (Frankreich)}},
title = {{{Comparative studies on emulsion preparation using different processing facilities}}},
year = {{2006}},
}
@misc{12061,
author = {{Kutz, Gerd and Bruns, Christina and Enga, M. and Hening, S.}},
location = {{Lyon (Frankreich)}},
title = {{{Current food ingredients in cosmetic formulations and their effects on relevant skin parameters}}},
year = {{2006}},
}
@misc{12062,
author = {{Kutz, Gerd and Bruns, Christina and Hennigs, Sören and Enga, M.}},
location = {{Genf}},
title = {{{Current ingredients in semi-solid formulations and their effects on skin hydration, transepidermal water loss and water resistance}}},
year = {{2006}},
}
@misc{12063,
author = {{Kutz, Gerd}},
location = {{Nürnberg}},
title = {{{Galenical Characterisation of Skin Care Products}}},
year = {{2006}},
}
@misc{12065,
author = {{Kutz, Gerd and Salzmann, Volker and Bruns, Christina and Lewandrowski, A.}},
location = {{Genf}},
title = {{{Comparative studies on processing facilities with special regard to the new Co-Twister System }}},
year = {{2006}},
}
@misc{12067,
author = {{Bruns, Christina and Müller, R. H. and Prinz, D. and Kutz, Gerd}},
location = {{Genf}},
title = {{{Identification of topical excipients with high performance spreadabilit}}},
year = {{2006}},
}
@misc{1611,
author = {{Imelmann, Kai and Kopka, Ragnar and Königsbrügge, Svenja and Willems, Tobias}},
keywords = {{Dokumentation, Freiwillige Feuerwehr}},
pages = {{62}},
publisher = {{Fachhochschule Lippe und Höxter}},
title = {{{Hand ins Feuer - Konzeption und Realisation einer DVD über die Freiwillige Feuerwehr}}},
year = {{2006}},
}
@inproceedings{2059,
author = {{Schaede, Johannes and Lohweg, Volker}},
booktitle = {{IST/SPIE 18th Annual Symposium on Electronic Imaging - Optical Security and Counterfeit Deterrence Techniques VI - Vol 6075}},
editor = {{van Renesse, Rundolf}},
pages = {{1--12}},
publisher = {{SPIE}},
title = {{{The Mechanisms of Human Recognition as a Guideline For Security Feature Development}}},
doi = {{https://doi.org/10.1117/12.656529}},
year = {{2006}},
}
@inproceedings{2060,
abstract = {{The authenticity checking and inspection of bank notes is a high labour intensive process where traditionally every note on every sheet is inspected manually. However with the advent of more and more sophisticated security features, both visible and invisible, and the requirement of cost reduction in the printing process, it is clear that automation is required. As more and more print techniques and new security features will be established, total quality security, authenticity and bank note printing must be assured. Therefore, this factor necessitates amplification of a sensorial concept in general. We propose a concept for both authenticity checking and inspection methods for pattern recognition and classification for securities and banknotes, which is based on the concept of sensor fusion and fuzzy interpretation of data measures. In the approach different methods of authenticity analysis and print flaw detection are combined, which can be used for vending or sorting machines, as well as for printing machines. Usually only the existence or appearance of colours and their textures are checked by cameras. Our method combines the visible camera images with IR-spectral sensitive sensors, acoustical and other measurements like temperature and pressure of printing machines.}},
author = {{Lohweg, Volker and Schaede, Johannes and Türke, Thomas}},
booktitle = {{IS&T/SPIE 18th Annual Symposium on Electronic Imaging - Optical Security and Counterfeit Deterrence Techniques VI, Proceedings(18) SPIE, Feb 2006. }},
publisher = {{SPIE}},
title = {{{Robust and Reliable Banknote Authentification and Print Flaw Detection with Opto-Acoustical Sensor Fusion Methods}}},
year = {{2006}},
}
@inproceedings{2061,
author = {{Schaede, Johannes and Türke, Thomas and Lohweg, Volker}},
publisher = {{SPIE Newsroom, The International Society for Optical Engineering}},
title = {{{Acoustical measurements improve print flaw detection and authenticity checking}}},
year = {{2006}},
}
@inproceedings{2062,
abstract = {{Bank note inspection is a complex task. As more and more print techniques and new security features are established, total quality security and bank note printing must be assured. Therefore, this factor necessitates change of a sensorial concept in general. We propose an optical-acoustical inspection method based upon the concepts of information fusion and fuzzy interpretation of data measures. Furthermore, we present a simplified scheme for information fusion for pattern recognition and data classification based on parametrical unimodal potential functions and a Sugeno-type score value analysis. Digital Object Identifier: 10.1109/ICIF.2006.301779
}},
author = {{Dyck, Walter and Schaede, Johannes and Türke, Thomas and Lohweg, Volker}},
booktitle = {{ 2006 9th International Conference on Information Fusion}},
isbn = {{ 1-4244-0953-5}},
keywords = {{Information security, Inspection, Printing machinery, Optical sensors, Data security, Personnel, Fuzzy systems, Sensor systems, Expert systems, Ink}},
pages = {{1--8}},
publisher = {{9th International Conference on Information Fusion, 2006. ICIF '06}},
title = {{{Information Fusion Application On Security Printing With Parametrical Fuzzy Classification}}},
doi = {{10.1109/ICIF.2006.301779}},
year = {{2006}},
}
@proceedings{2063,
editor = {{Lohweg, Volker and Türke, Thomas and Willeke, Harald}},
publisher = {{14th European Signal Processing Conference, Florence, Italy}},
title = {{{Application on Pattern Recognition for Banknotes}}},
year = {{2006}},
}
@inproceedings{2064,
author = {{Lohweg, Volker}},
publisher = {{OWL-Maschinenbau}},
title = {{{Effektive Maschinenüberwachung mit Bildverarbeitung}}},
year = {{2006}},
}
@inproceedings{2321,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
booktitle = {{Proc. of the 6th ASMO-UK/ISSMO Conf. on Engineering Design Optimization, St Edmund Hall, Oxford, UK}},
editor = {{Sienz, Johann and M. Querin, Osvaldo and V. Toropov, Vassili and D. Gosling, Peter}},
isbn = {{9780853162513}},
pages = {{173--181}},
publisher = {{University of Leeds, UK}},
title = {{{Relations between Structural Optimization and Configurational Mechanics with Applications to Mesh Optimization}}},
year = {{2006}},
}
@article{2334,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
journal = {{Proceedings in Applied Mathematics and Mechanics}},
number = {{1}},
pages = {{245--246}},
title = {{{Coherence of Structural Optimization and Configurational Mechanics}}},
doi = {{10.1002/pamm.200610103}},
volume = {{6}},
year = {{2006}},
}
@article{2425,
author = {{Upmann, Matthias and Klein, Günter and Reich, Felix and Peters, Ulrike and Nasser Al-Maasri, Abdul and Atanassova, Viktoria}},
journal = {{Forschung fürs Leben}},
pages = {{15--18}},
title = {{{Detektive im Schlachthof: Auf der Spur von Campylobacter}}},
year = {{2006}},
}
@article{2458,
author = {{Upmann, Matthias and Peters, Jan and Lienau, Jan-Alexander and Nähter, Gritt and Alter, Thomas}},
journal = {{Archiv für Lebensmittelhygiene}},
number = {{9/10}},
pages = {{136--140}},
title = {{{Resultate der ersten Phase des Nationalen Campylobacter-Masthähnchenmonitorings 2004-2005}}},
volume = {{57}},
year = {{2006}},
}
@article{2460,
author = {{Upmann, Matthias and Delcenserie, V. and Kopeinig, K. and Pollinger, S. and Beerens, H. and Gavani, F. and Bonaparte, C.}},
journal = {{Journal of Food Protection}},
number = {{4}},
pages = {{871--877}},
title = {{{Bifidobacterium Species Isolated from Animal Feces and from Beef and Pork Meat}}},
volume = {{69}},
year = {{2006}},
}
@inproceedings{2489,
author = {{Upmann, Matthias}},
location = {{Krefeld}},
title = {{{Einführung in die histologische Lebensmitteluntersuchung}}},
year = {{2006}},
}
@inproceedings{2490,
author = {{Upmann, Matthias}},
location = {{refeld}},
title = {{{Histologischer Nachweis von Verdickungsmitteln}}},
year = {{2006}},
}
@inproceedings{2491,
author = {{Upmann, Matthias and Gethmann, J. and Möller, M. and Schlieper, B. and Krapat, R.}},
location = {{Würzburg}},
title = {{{Reduzierung der Campylobacter-Belastung in der Lebensmittelkette}}},
year = {{2006}},
}
@inproceedings{2492,
author = {{Upmann, Matthias and Visscher, C. and Winter, P. and Stratmann, J. and Beyerbach, M. and Kamphues, J.}},
location = {{München}},
title = {{{Effekte bestimmter Fütterungsmaßnahmen in Schweinebeständen zur Reduktion der Salmonellenprävalenz – Ergebnisse einer Feldstudie. }}},
year = {{2006}},
}
@article{2518,
author = {{Stiebing, Achim and Weyland, Gerd}},
journal = {{Fleischwirtschaft}},
number = {{11}},
pages = {{23 -- 26}},
title = {{{Was ist erlaubt, was verboten? : 1. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2005 - Teil 1}}},
volume = {{85}},
year = {{2006}},
}
@book{2693,
author = {{Kattenbusch, Markus and Kuhne, Volker and Noosten, Dirk and Stiglocher, Hans}},
isbn = {{978-3-481-02266-2}},
pages = {{87}},
publisher = {{Müller}},
title = {{{Grundlagen der Preisermittlung für Bauarbeiten : Plümecke light ; mit Programm zur Angebotskalkulation }}},
year = {{2006}},
}
@inproceedings{4058,
abstract = {{Modern vehicles use Electronic Control Units (ECU), connected via Controller Area Network (CAN) to perform functions. Many of these functions are distributed across several ECUs. This network interconnection enables the sharing of sensors, calculated information and actuators. As new functionality is added, the number of ECUs and their complexity increase.}},
author = {{Schulte, Thomas and Adenmark, Mikael and Deter, Matthias}},
booktitle = {{SAE 2006 Commercial Vehicle Engineering Congress & Exhibition, October 2006, Rosemont, IL, USA, Session: Systems Engineering Part 1 of 2}},
title = {{{Testing Networked ECUs in a HIL Based Integration Lab}}},
year = {{2006}},
}
@inbook{4059,
abstract = {{Modern vehicles use Electronic Control Units (ECU), connected via Controller Area Network (CAN) to perform functions. Many of these functions are distributed across several ECUs. This network interconnection enables the sharing of sensors, calculated information and actuators. As new functionality is added, the number of ECUs and their complexity increase. This paper describes the values and possibilities of a Hardware-ln-the-Loop (HIL) based Integration Lab, which enables a wide range of automatic tests to be performed on networked ECUs. The Integration Lab is the complex rebuild of a Scania truck/bus, containing the ECU superset, for connecting and testing networked ECUs. It involves more than 30 ECUs and eleven CAN networks. For a complete system, where the variant fauna is as extensive as the Scania vehicle, and continuously growing in size, the need for testing increases, especially regarding testing different variants and regression testing. Manual testing is then no longer an option, since the need for testing, concerning both quality and quantity, increases above the limit of where manual testing is applicable. A manual test lab is often a good way to start testing ECUs on an early stage of the development and is relatively easily and fast built. But in the long run the need for an automated lab becomes obvious. In the beginning the output of an automated lab is less than that of a manual lab. When the output level reaches that of a manual lab it continues to climb past this level since test scripts written earlier will continue to be run each test round. The Integration Lab demonstrates that dSPACE Simulator technology is capable of handling huge vehicle networks far in excess of that of passenger cars.}},
author = {{Schulte, Thomas and Adenmark, Mikael and Deter, Matthias}},
booktitle = {{SAE-SP}},
isbn = {{978-0-7680-1827-1}},
pages = {{23 -- 31}},
title = {{{Testing networked ECUs in a HIL based Integration Lab.}}},
volume = {{2060}},
year = {{2006}},
}
@inproceedings{4134,
author = {{Kutz, Gerd}},
keywords = {{Scientific lecture}},
location = {{Zürich (Schweiz)}},
title = {{{Modern formulation concepts with actual raw materials}}},
year = {{2006}},
}
@inbook{4152,
author = {{Austermann-Haun, Ute}},
booktitle = {{TRAFO Forschungsreport 2006}},
pages = {{152 -- 153}},
title = {{{Entwicklung einer modular aufgebauten Abwasserreinigungsanlage mitanschließender Brauchwassernutzung zur Substitution von Trinkwasser}}},
year = {{2006}},
}
@misc{4154,
author = {{Austermann-Haun, Ute and Klick, K. and Witte, Heike}},
publisher = {{Ministerium für Umwelt und Naturschutz, Landwirtschaft und Verbraucherschutz des Landes NRW}},
title = {{{Umsetzung des Umweltinformationsgesetzes für Abwassereinleitungen - Exemplarische Datenaufnahme und Datenweiterleitung zu D-E-A}}},
year = {{2006}},
}
@article{4421,
author = {{Jasperneite, Jürgen and Römer, Matthias}},
journal = {{atp - Automatisierungstechnische Praxis}},
number = {{1}},
pages = {{33--40}},
publisher = {{R. Oldenbourg Verlag}},
title = {{{PROFINET in der Prozessautomation: eine Positionierung}}},
year = {{2006}},
}
@inproceedings{4422,
author = {{Jasperneite, Jürgen}},
location = {{Heide, Westküste}},
title = {{{Echtzeit-Ethernet und Entwicklungstendenzen von Bussystemen in der Automatisierungstechnik}}},
year = {{2006}},
}
@article{4423,
author = {{Jasperneite, Jürgen}},
journal = {{ETZ-Report}},
number = {{35}},
publisher = {{VDE-Verlag}},
title = {{{Zeitverhalten der Linientopologie in einem PROFINET-System}}},
year = {{2006}},
}
@inproceedings{4424,
author = {{Jasperneite, Jürgen and Karanam, S.P. and Trsek, Henning}},
location = {{Torino, Italy}},
title = {{{Potential of the HCCA scheme defined in IEEE802.11e for QoS enabled Industrial Wireless Networks}}},
year = {{2006}},
}
@inproceedings{4425,
author = {{Jasperneite, Jürgen and Trsek, Henning}},
location = {{Prague}},
title = {{{A Simulation Case Study of the new IEEE 802.11e HCCA mechanism in Industrial Wireless Networks}}},
year = {{2006}},
}
@inproceedings{4426,
author = {{Jasperneite, Jürgen and Trsek, Henning}},
booktitle = {{Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund }},
editor = {{Wollert, Jörg}},
isbn = {{978-3-18-377210-0}},
location = {{Dortmund}},
number = {{772}},
pages = {{177--184}},
publisher = {{VDI-Verl. }},
title = {{{Leistungsbewertung einer zentralisierten WLAN Infrastruktur für mobile Anwendungen mit Echtzeit Anforderungen in industriellen Automatisierungsnetzwerken}}},
volume = {{10}},
year = {{2006}},
}
@misc{8189,
author = {{Höing, Michael and Helmig, Kai and Meier, Uwe}},
booktitle = {{Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund}},
editor = {{Wollert, Jörg}},
isbn = {{978-3-18-377210-0}},
location = {{Dortmund}},
pages = {{155--164}},
publisher = {{VDI-Verl.}},
title = {{{Untersuchungen zur Störfestigkeit und Übertragungssicherheit der Bluetooth-Technologie am Beispiel eines industriellen Sensor-Aktor-Systems}}},
volume = {{772}},
year = {{2006}},
}
@misc{8210,
author = {{Höing, M. and Helmig, K. and Meier, Uwe}},
booktitle = {{SPS/IPC/DRIVES, 28. - 30. November 2006, Nürnberg}},
publisher = {{SPS/IPC/DRIVES}},
title = {{{Erprobungstests von drahtlosen Sensor-Aktor-Systemen in rauen Industrieumgebungen}}},
year = {{2006}},
}
@misc{8211,
author = {{Helmig, K. and Meier, Uwe and Höing, M.}},
booktitle = {{MessTec & Automation, 11/2006, 64 - 65}},
publisher = {{MessTec & Automation}},
title = {{{Völlig ungestört - Untersuchungen zur Störfestigkeit und Übertragungssicherheit der Bluetooth-Technologie}}},
year = {{2006}},
}
@misc{8971,
author = {{Kümmel, Jens and Zülch, Henning}},
booktitle = {{Steuern und Bilanzen : STuB ; Zeitschrift für das Steuerrecht und die Rechnungslegung der Unternehmen}},
issn = {{1615-8024}},
number = {{10}},
pages = {{393--395}},
publisher = {{NWB Verlag}},
title = {{{Lageberichterstattung: Das IASB Discussion Paper „Management Commentary“}}},
year = {{2006}},
}
@misc{9445,
author = {{Wilhelm, Patrick}},
booktitle = {{Lebensmitteltechnik}},
issn = {{0047-4290}},
number = {{11}},
pages = {{44 -- 45}},
publisher = {{LT Food Medien-Verlag GmbH}},
title = {{{Ressourcen im Blick. Ein Bericht von den GVC/Dechema Jahrestagungen 2006 in Wiesbaden.}}},
year = {{2006}},
}
@article{2734,
abstract = {{A new chronic treatment for inherited disorders of long-chain fatty acid oxidation involves administering up to one-third of dietary calories as triheptanoin, a medium-odd-chain triglyceride (Roe CR, Sweetman L, Roe DS, David F, and Brunengraber H. J Clin Invest 110: 259–269, 2002). Heptanoate and C5-ketone bodies derived from its partial oxidation in liver are precursors of anaplerotic propionyl-CoA in peripheral tissues. It was hypothesized that increasing anaplerosis in peripheral tissues would boost energy production. In the present study, we tested the potential of a triheptanoin emulsion as an intravenous nutrient. Normal rats were infused with triheptanoin intravenously or intraduodenally at up to 40% of caloric requirement. The blood concentration ratio (heptanoate/C5-ketone bodies) was high with intravenous and low with intraduodenal triheptanoin infusion. During intravenous infusion of triheptanoin, lipolysis was stimulated but appeared compensated by fatty acid reesterification. During intraduodenal infusion of triheptanoin, lipolysis was not stimulated. Our data support the hypothesis that intravenous triheptanoin could be used to treat decompensated patients with long-chain fatty acid oxidation disorders.}},
author = {{Kinman, Renèe P. and Kasumov, Takhar and Jobbins, Kathryn A. and Thomas, Katherine R. and Adams, Jillian E. and Brunengraber, Lisa N. and Kutz, Gerd and Brewer, Wolf-Ulrich and Roe, Charles R. and Brunengraber, Henri }},
journal = {{American journal of physiology, Endocrinology and metabolism}},
number = {{4}},
pages = {{E860 -- E868}},
publisher = {{APS}},
title = {{{Parenteral and enteral metabolism of anaplerotic triheptanoin in normal rats}}},
doi = {{https://doi.org/10.1152/ajpendo.00366.2005}},
volume = {{291}},
year = {{2006}},
}
@book{2780,
author = {{Vetter, Andreas}},
isbn = {{9783766716644}},
keywords = {{21st century, Architecture, Architecture, Domestic, Einfamilienhaus, Europe, Europe, German-speaking, Gables, Giebelhaus, History, Wohnen, Wohnhaus, Wohnungsbau}},
publisher = {{Callwey}},
title = {{{Moderne Giebelhäuser: Traditionelle Form - innovatives Konzept}}},
year = {{2006}},
}
@book{2781,
author = {{Vetter, Andreas}},
isbn = {{3766716646}},
keywords = {{Einfamilienhaus, Giebelhaus}},
publisher = {{Callwey}},
title = {{{Moderne Giebelhäuser: Traditionelle Form - innovatives Konzept}}},
year = {{2006}},
}
@article{2787,
author = {{Noosten, Dirk}},
issn = {{1614-6123}},
journal = {{Der Bausachverständige - Zeitschrift für Bauschäden, Grundstückswert und gutachterliche Tätigkeit }},
number = {{4}},
pages = {{39}},
publisher = {{Fraunhofer IRB Verlag }},
title = {{{Die Unterdeckung Allgemeiner Geschäftskosten durch Bauablaufstörungen - Teil 2}}},
volume = {{42}},
year = {{2006}},
}
@article{2788,
author = {{Noosten, Dirk}},
issn = {{1614-6123}},
journal = {{Der Bausachverständige - Zeitschrift für Bauschäden, Grundstückswert und gutachterliche Tätigkeit }},
number = {{3}},
pages = {{44}},
publisher = {{Fraunhofer IRB Verlag }},
title = {{{Die Unterdeckung Allgemeiner Geschäftskosten durch Bauablaufstörungen - Teil 1}}},
volume = {{48}},
year = {{2006}},
}
@article{2832,
author = {{Müller, Ulrich and Lilie, Markus and Wilhelm, Patrick}},
issn = {{0009-286X}},
journal = {{Chemie-Ingenieur-Technik}},
number = {{9}},
pages = {{1243--1244}},
publisher = {{WILEY-VCH Verlag GmbH & Co. KGaA}},
title = {{{Anwendung der Flash-Verdampfung zur Entkeimung pflanzlicher Materialien}}},
doi = {{10.1002/cite.200650159}},
volume = {{78}},
year = {{2006}},
}
@article{2833,
author = {{Müller, Ulrich and Rumke, Tim and Wilhelm, Patrick and Lilie, Markus}},
issn = {{1431-9292}},
journal = {{Zeitschrift für Arznei- und Gewürzpflanzen}},
number = {{3}},
pages = {{142--144}},
publisher = {{ERLING Verlag GmbH & Co. KG}},
title = {{{Schonende Keimzahlreduktion bei Kamillenblüten (Chamomilla recutica (L.) Rauschert)}}},
volume = {{11}},
year = {{2006}},
}
@book{2862,
editor = {{Vetter, Andreas}},
isbn = {{9783899860801}},
pages = {{36}},
publisher = {{avedition}},
title = {{{Ausgezeichnete Häuser und ein Gartenschwimmbad : [anlässlich der Ausstellung vom 12.05.2006 bis 02.06.2006 im Wechselraum, Bund Deutscher Architekten BDA, Stuttgart]}}},
year = {{2006}},
}
@book{2864,
editor = {{Vetter, Andreas}},
isbn = {{9783887783082}},
pages = {{7}},
publisher = {{Spurbuchverlag}},
title = {{{Rokokorelevanz, weiße Wand: [erschienen zur Ausstellung Rokokorelevanz, Weiße Wand, 13.09. bis 22.10.2006]}}},
year = {{2006}},
}
@book{2865,
editor = {{Vetter, Andreas and Schmitthenner, Paul}},
isbn = {{3887783050}},
publisher = {{Spurbuchverlag}},
title = {{{Die 25 Einfamilienhäuser der Holzsiedlung am Kochenhof: Errichtet in zeitgemäßen Holzbauweisen als "Ausstellung Deutsches Holz für Hausbau und Wohnung" Stuttgart 1933 ; mit gegen 200 Ansichten, Planen und Rissen : [kommentierte Neuausgabe des Katalogbuches zur Stuttgarter Musterhaussiedlung von 1933 ; anläßlich der Ausstellung Viel Holz - Innovativer Holzbau zwischen Kochenhof und Weißenhof, Architekturgalerie am Weißenhof, Stuttgart, 19/07 - 03/09/2006]}}},
year = {{2006}},
}
@inproceedings{2934,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
location = {{Berlin}},
title = {{{Coherence of Structural Optimization and Configurational Mechanics}}},
year = {{2006}},
}
@inproceedings{2936,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
location = {{Oxford}},
title = {{{Relations between Structural Optimization and Configurational Mechanics with Applications to Mesh Optimization}}},
year = {{2006}},
}
@inproceedings{3109,
author = {{Austermann-Haun, Ute and Klick, K.}},
location = {{Essen}},
title = {{{Das NRW-Datenmodell zur Erfassung von Indirekteinleitern und seine Umsetzung}}},
year = {{2006}},
}
@inproceedings{3158,
author = {{Austermann-Haun, Ute}},
location = {{Yarmouk University, Irbid, Jordanien}},
title = {{{Industrial Wastewater-Potentials for Cost-Reduction through Internal Measures}}},
year = {{2006}},
}
@inproceedings{3256,
author = {{Austermann-Haun, Ute}},
location = {{Leverkusen}},
title = {{{Anaerobe Abwasserbehandlung – Planung und Auslegung von Abwasserbehandlungsanlagen an Hand von Beispielen}}},
year = {{2006}},
}
@inproceedings{3257,
author = {{Austermann-Haun, Ute}},
location = {{Wissenschaftszentrum, Bonn}},
title = {{{Verbindung von fachlichen Alumni-Netzwerken und Wirtschaft}}},
year = {{2006}},
}
@inproceedings{3258,
author = {{Austermann-Haun, Ute}},
location = {{Essen}},
title = {{{Das NRW-Datenmodell zur Erfassung von Indirekteinleitern und seine Umsetzung}}},
year = {{2006}},
}
@inproceedings{3259,
author = {{Austermann-Haun, Ute}},
location = {{Detmold, Kreis Lippe}},
title = {{{Technische Lösungen zum Schutz vor Überflutungsschäden}}},
year = {{2006}},
}
@inproceedings{3260,
author = {{Austermann-Haun, Ute}},
location = {{Gestor}},
title = {{{1001 Nacht – der Zauber des Orients}}},
year = {{2006}},
}
@inproceedings{3261,
author = {{Austermann-Haun, Ute}},
location = {{Fachhochschule Lippe und Höxter, Detmold}},
title = {{{Überblick über Kleinkläranlagensysteme oder „Die Katze im Sack“.}}},
year = {{2006}},
}
@inproceedings{3262,
author = {{Austermann-Haun, Ute}},
location = {{Fachhochschule Lippe und Höxter, Detmold}},
title = {{{Verfahrenstechnik von Kleinkläranlagen heute und morgen}}},
year = {{2006}},
}
@inproceedings{3263,
author = {{Austermann-Haun, Ute}},
location = {{Schwerte}},
title = {{{Grundlagen, Einflussfaktoren und Einsatzbereiche von Anaerobverfahren}}},
year = {{2006}},
}
@article{3409,
author = {{Schneider, Jan and Krottenthaler, Martin and Beck, Werner and Weisser, Horst}},
issn = {{0046-9750}},
journal = {{Journal of the Institute of Brewing}},
number = {{4}},
pages = {{380--387}},
publisher = {{Wiley & Sons Ltd.}},
title = {{{Study on the Membrane Filtration of Mash with Particular Respect to the Qualityof Wort and Beer}}},
volume = {{111}},
year = {{2006}},
}
@article{3410,
author = {{Schneider, Jan and Orzinski, Martin and Embs, Frank W. and Fritsch, Karsten and Weber, Ingrid}},
issn = {{0341-7115}},
journal = {{Brauindustrie}},
number = {{11}},
pages = {{50--57}},
title = {{{Monolayer-Barriere-Blend-PET-Flaschen : Untersuchung zur Eignung für die Bierabfüllung}}},
year = {{2006}},
}
@article{3445,
author = {{Schneider, Jan and Schröder, Gerhard and Kerwitz, Yvonne and Weber, Ingrid and Orzinski, Martin}},
journal = {{Brauwelt international}},
number = {{4}},
pages = {{218--222}},
title = {{{Effect of additives on chemical and tribological glass corrosion in washing of glass bottles}}},
year = {{2006}},
}
@book{3473,
author = {{Jungkind, Wilfried}},
isbn = {{978-3-8120-0624-8}},
publisher = {{Merkur-Verlag}},
title = {{{Personalwirtschaft : Folien im PowerPoint-Format}}},
year = {{2006}},
}
@article{3474,
author = {{Jungkind, Wilfried and Doleschal, Reinhard}},
journal = {{Die neue Hochschule}},
number = {{4-5}},
pages = {{40 -- 43}},
title = {{{Fachintegrierte Vermittlung von Schlüsselqualifikationen}}},
volume = {{47}},
year = {{2006}},
}
@misc{3520,
author = {{Schneider, Jan}},
booktitle = {{Lippische Landeszeitung}},
number = {{288}},
pages = {{17}},
title = {{{Bier aus einer Plastikflasche? : Das Interwiev mit Prof. Dr. Jan Schneider, Getränketechnologe an der Fachhochschule}}},
year = {{2006}},
}
@book{3534,
author = {{Schneider, Jan and Manger, Hans-J.}},
isbn = {{978-3-921690-55-0}},
pages = {{175}},
publisher = {{VLB}},
title = {{{Kälteanlagen in der Brau- und Malzindustrie}}},
year = {{2006}},
}
@article{3535,
author = {{Schneider, Jan and Kasprzyk, Andreas and Pahl, Roland and Orzinski, Martin}},
journal = {{Brauwelt}},
number = {{45}},
pages = {{1382--1388}},
title = {{{Pasteurisation kohlensäurehaltiger Erfrischungsgetränke in PET-Flaschen}}},
year = {{2006}},
}
@article{3536,
author = {{Schneider, Jan and Böttrich, A.-H. and Petreck, M. and Lange, T. and Wittmann, H.}},
journal = {{Brauwelt}},
number = {{48-49}},
pages = {{1499--1500}},
title = {{{Privatbrauerei Iserlohn - Neuverrohrung eines Gärkellers bei laufendem Betrieb : Gesteigerter Automatisierungsgrad}}},
volume = {{146}},
year = {{2006}},
}
@article{3589,
author = {{Riedl, Ulrich}},
journal = {{Naturschutz und Biologische Vielfalt}},
number = {{18}},
pages = {{199 -- 220}},
publisher = {{(Landwirtschaftsverlag) Bundesamt für Naturschutz}},
title = {{{Die Rolle der Roten Listen in der Naturschutz- und Planungspraxis}}},
year = {{2006}},
}
@inproceedings{3652,
author = {{Song, Jian and Helmig, Christian and Feye-Hohmann, J. and Schulz, A.}},
booktitle = {{Proceedings of the fifty-second ieee holm conference on Electrical contacts}},
isbn = {{1-4244-0581-5}},
location = {{Montreal, QC, Canada }},
pages = {{207 -- 210}},
publisher = {{IEEE}},
title = {{{Bending Test of Contact Materials}}},
volume = {{2006}},
year = {{2006}},
}
@misc{3730,
author = {{Austermann-Haun, Ute and Brieskorn, N. and Barnhöfer, M.}},
publisher = {{Auftraggeber StUA Lippstadt}},
title = {{{Überarbeitung und Nacherhebung von Daten zur industriellen und gewerblichen Abwasserbeseitigung im Dienstbezirk des StUA Lippstadt}}},
year = {{2006}},
}
@misc{3758,
author = {{Austermann-Haun, Ute and Klick, K. and Witte, H.}},
publisher = {{Ministerium für Umwelt und Naturschutz, Landwirtschaft und Verbraucherschutz des Landes Nordrhein-Westfalen}},
title = {{{Umsetzung des Umweltinformationsgesetzes für Abwassereinleitungen – Exemplarische Datenaufnahmen und Datenweiterleitung zu D-E-A}}},
year = {{2006}},
}
@article{3869,
author = {{Riegel, Adrian}},
journal = {{TRAFO-Forschungsreport}},
pages = {{156 -- 157}},
publisher = {{AIF Otto von Guericke}},
title = {{{Optimierung des Kantenanleimens auf Bearbeitungszentren}}},
year = {{2006}},
}
@article{3871,
author = {{Riegel, Adrian}},
issn = {{0018-3768}},
journal = {{Holz als Roh- und Werkstoff}},
number = {{5}},
pages = {{431 -- 432}},
publisher = {{Springer}},
title = {{{Temperaturverlauf bei der Schmalflächenbeschichtung}}},
volume = {{64}},
year = {{2006}},
}
@article{3874,
author = {{Riegel, Adrian}},
issn = {{0018-3822}},
journal = {{Die Holzbearbeitung}},
number = {{10}},
pages = {{70 -- 72}},
publisher = {{A.G.T.-Verlag}},
title = {{{Der Materialtyp entscheidet. Eigenschaften von bearbeiteten Oberflächen mitteldichter Faserplatten im Hinblick auf eine 3D-Folienkaschierung (Teil 1)}}},
volume = {{52}},
year = {{2006}},
}
@article{3876,
author = {{Riegel, Adrian}},
issn = {{0018-3822}},
journal = {{Die Holzbearbeitung}},
number = {{11}},
pages = {{54 -- 57}},
publisher = {{A.G.T.-Verlag}},
title = {{{Der Materialtyp entscheidet. Eigenschaften von bearbeiteten Oberflächen mitteldichter Faserplatten im Hinblick auf eine 3D-Folienkaschierung (Teil 2)}}},
volume = {{52}},
year = {{2006}},
}
@article{3878,
author = {{Riegel, Adrian and Simon, Christian and Wittenstein, Kirsten}},
issn = {{0018-3792}},
journal = {{Holz-Zentralblatt}},
number = {{24}},
pages = {{721 -- 722}},
publisher = {{Holz-Zentralblatt-Verl.}},
title = {{{Braucht die Holzindustrie eine Prozessqualifikation? : Eine Annäherung an das Thema am Beispiel des Kantenanleimens auf Bearbeitungszentren}}},
volume = {{132}},
year = {{2006}},
}
@article{3880,
author = {{Riegel, Adrian}},
issn = {{0018-3881}},
journal = {{Holztechnologie}},
number = {{5}},
pages = {{45 -- 48}},
publisher = {{Institut für Holztechnologie}},
title = {{{Beanspruchung von 3D-kaschierten MDF-Fronten}}},
volume = {{47}},
year = {{2006}},
}
@article{5615,
author = {{Heiss, Stefan and Puls, Oliver}},
issn = {{0948-9487 }},
journal = {{Sicherheit + Management : Magazin für Safety und Security}},
number = {{11}},
publisher = {{GIT Verl.}},
title = {{{Security in der Automatisierungstechnik.}}},
year = {{2006}},
}
@article{5616,
author = {{Heiss, Stefan and Puls, Oliver}},
issn = {{0935-0187 }},
journal = {{SPS-Magazin : Zeitschrift für Automatisierungstechnik }},
number = {{1/2}},
publisher = {{TeDo-Verl. }},
title = {{{IPsec in der Automatisierungstechnik: Einsatzmöglichkeiten und besondere Anforderungen.}}},
volume = {{14}},
year = {{2006}},
}
@inproceedings{5705,
author = {{Bruder, Carmen and Mahlke, Sascha and el Marjani, Radouane and Minge, Michael and Wand, Andreas}},
editor = {{Heinecke, Andras M. and Paul, Hansjürgen}},
location = {{München}},
pages = {{55--58}},
publisher = {{Oldenbourg Verlag}},
title = {{{Gerätesimulation mit Squeak}}},
year = {{2006}},
}
@inproceedings{5706,
author = {{Mahlke, Sascha and Minge, Michael and Thüring, Manfred}},
booktitle = {{CHI 2006}},
pages = {{1061--1066}},
publisher = {{ACM Press}},
title = {{{Measuring multiple components of emotions in interactive contexts}}},
year = {{2006}},
}
@article{5967,
author = {{Nether, Ulrich and Pottgiesser, Uta and König, Katharina}},
issn = {{0173-8046 }},
journal = {{AIT}},
number = {{6}},
pages = {{Sonderteil des BDIA}},
publisher = {{Koch}},
title = {{{Forschungsprofil in der Innenarchitektur}}},
year = {{2006}},
}
@inbook{5969,
author = {{Nether, Ulrich}},
booktitle = {{Zukunftsschulen : das Werkbuch Zukunftsschulen im Wohnquartier ; Pädagogen, Sozialarbeiterinnen, Schüler, Wissenschaftlerinnen, Erzieher, Architektinnen, Ingenieure, Unternehmerinnen und Landsschaftsplaner entwickeln Grundlagen, Ideen und Räume für Schulen der Zukunft}},
editor = {{Grimm, Gaby}},
isbn = {{978-3-89861-622-5}},
pages = {{212--217}},
publisher = {{Klartext}},
title = {{{Open Spaces- Möglichkeitsräume, Positionen zur Innenraumgestaltung}}},
year = {{2006}},
}
@article{619,
abstract = {{Vor dem Hintergrund, dass Arbeitsplaner zu einem großen Anteil ihrer Arbeitszeit Software anwenden und einem erhöhten Zeitdruck ausgesetzt sind, liefern ergonomisch gestaltete Softwareprodukte einen nicht zu unterschätzenden Beitrag zur Verminderung der psychischen Belastung der Planer, zur Erhöhung der Arbeitsproduktivität in der Planung und damit zur Einhaltung von engen Terminvorgaben. Der Beitrag beschreibt anhand eines Projektes, bei dem eine spezielle Software zur Montagelinientaktung neugestaltet wurde, wie softwareergonomische Aspekte im Entwicklungsprozess dieses Produktes berücksichtigt wurden und welche Ergebnisse durch eine benutzerzentrierte Produktentwicklung erzielt werden konnten.}},
author = {{Hinrichsen, Sven and Kausch, Bernhard and Ebert, Kai and Schosnig, Rainer}},
issn = {{0947-0085}},
journal = {{ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb}},
number = {{3}},
pages = {{150--153}},
publisher = {{Carl Hanser Verlag}},
title = {{{Software-Ergonomie in der Arbeitsplanung}}},
doi = {{10.3139/104.101009}},
volume = {{101}},
year = {{2006}},
}
@article{6202,
author = {{Rumke, T. and Lilie, M. and Wilhelm, P. and Müller, Ulrich}},
journal = {{Zeitschrift für Arznei- und Gewürzpflanzen}},
number = {{3}},
pages = {{142--144}},
title = {{{Schonende Keimzahlreduktion von Arznei- und Gewürzpflanzen am Beispiel von Matricariae flos}}},
volume = {{11}},
year = {{2006}},
}
@inbook{626,
author = {{Gamber, Thilo Gerhard and Zülch, G.}},
booktitle = {{Operations Research}},
pages = {{255}},
publisher = {{Universität}},
title = {{{Methodology for the Analysis of Simulation-Based Decision-Making in the Production Area}}},
year = {{2006}},
}
@inproceedings{629,
abstract = {{In scientific literature a significant number of publications about work sampling can be found. For the most part these are related to the industrial sector as well as to the health service, in particular hospitals. As far as the application of work sampling in the retail trade is concerned, only a very limited number of publications can be found. These usually focus on small retail companies or single sections of department stores. The authors of the article have carried out work sampling studies in three large-area stores of a German retail chain. In the first part of their article, the authors describe the goals and context of the study. In the second part, important resulting requirements from the goals and specific framework conditions of retail trade are transferred to the study. The procedure during the implementation of these requirements is then roughly described. In the third part of the article, selected results of the study including a correlation analysis are presented and interpreted.}},
author = {{Hinrichsen, Sven and Peters, M. and Schlick, C. and Voget, H.}},
booktitle = {{Proceedings of the IEA2006 - 16th World Congress on Ergonomics}},
editor = {{Pikaar, R. N. and Koningsveld, E. A.P. and Settels, P. J. M.}},
issn = {{0003-6870}},
location = {{Maastricht}},
publisher = {{Elsevier}},
title = {{{Application for Work Sampling in the Retail Trade}}},
year = {{2006}},
}
@inbook{630,
author = {{Jungkind, Wilfried}},
booktitle = {{BWL-Klausurentraining}},
editor = {{Jaschinski, Christian}},
isbn = {{ 978-3-8120-0650-7}},
pages = {{105--120 ; 337--354}},
publisher = {{Merkur-Verlag}},
title = {{{Produktionsmanagement}}},
year = {{2006}},
}
@article{632,
author = {{Jungkind, Wilfried and Doleschal, Reinhard}},
issn = {{0340-448x}},
journal = {{Die neue Hoschschule}},
number = {{4-5}},
pages = {{40--43}},
publisher = {{Hochschullehrerbund - Bundesvereinigung (hlb)}},
title = {{{Fachintegrierte Vermittlung von Schlüsselqualifikationen}}},
year = {{2006}},
}
@article{641,
author = {{Jungkind, Wilfried and Schleuter, Dirk}},
journal = {{IHK Lippe Info}},
number = {{2}},
pages = {{32f}},
publisher = {{IHK}},
title = {{{Restrukturierungspotenziale in KMU erschließen}}},
volume = {{61}},
year = {{2006}},
}
@misc{10152,
author = {{Witte, Stefan and Glandorf, Hermann and Sander, Christian}},
booktitle = {{Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund}},
editor = {{Wollert, Jörg}},
isbn = {{978-3-18-377210-0}},
location = {{Dortmund}},
pages = {{7--16}},
publisher = {{VDI}},
title = {{{Untersuchungen zur WiMax-Technologie als breitbandiger Internetzugang im ländlichen Gebiet}}},
volume = {{10}},
year = {{2006}},
}
@proceedings{10636,
abstract = {{Any academic conference requires the efforts of many people, from conference committee members to reviewers to authors to attendees. I would like to thank some of the people who helped organize ACM Hypertext 2006 here. Uffe K. Wiil did an excellent job as General Chair, taking care of the lion's share of the budgeting, planning, and organizing, from the hotel selection to the day-to-day logistics. Jessica Rubart was an extremely able and effective co-Program Chair. Niels Olof Bouvin, the Technical Services Chair, worked hard to set up, customize and maintain our review system. Publicity Chair David Millard ensured that word of the conference reached many people.The reviewers this year did an excellent job. We received 41 full paper submissions, of which 12 were accepted. We also received 29 short paper submissions, of which 10 were accepted. As these acceptance rates indicate, we were unable to accept every paper we would have liked. We were particularly pleased to see a large number of papers that spoke to this year's theme of social networks and networking. This pays tribute to the breadth and flexibility of the community, something that many people note as one of the true strengths of this conference series.ACM Hypertext, as a conference series, is at a crossroads. When Uffe Wiil and I agreed to organize this year's event, we generated a quick preliminary call for papers with the headline "Quo Vadimus?" Looking at the submissions and accepted papers at this year (and, indeed the past several years) conference gives us some idea of how the Hypertext community has changed since the initial workshops of the late 1980's. Understanding this change can help us answer our question about where we are going. I hope we can use this event not only to further our understanding of the research aspects of our community, but also to plot a sustainable course for the future.}},
editor = {{Wiil, Uffe K. and Nürnberg, Peter J. and Rubart, Jessica}},
isbn = {{978-1-59593-417-8}},
location = {{Odense, Denmark}},
publisher = {{Association for Computing Machinery (ACM)}},
title = {{{Proceedings of the seventeenth conference on Hypertext and hypermedia (HT'06)}}},
doi = {{10.1145/1149941}},
year = {{2006}},
}
@inproceedings{4812,
abstract = {{In this paper, we present a component-based architecture for developing pervasive games that can flexibly integrate both graphical and tangible user interfaces. It allows for gradually augmenting purely virtual games with elements from the real world, thus transferring computer entertainment to our physical realities.
As a proof of concept, we have implemented a tabletop role playing game called Caves & Creatures that can be played with varying proportions of physical and graphical interface components and will provide a test bed for different interaction device ensembles.}},
author = {{Magerkurth, Carsten and Röcker, Carsten and Engelke, Timo}},
booktitle = {{Proceedings of Future Play 2006, October 10-12, London, Ontario, Canada, CD-ROM}},
keywords = {{Pervasive Gaming Applications, User Interfaces}},
location = {{London, UK ; Ontario, Canada}},
title = {{{From the Virtual to the Physical: The Gradual Transgression to Pervasive Games}}},
year = {{2006}},
}
@inproceedings{4813,
abstract = {{This paper presents a formative multi-method evaluation on future gaming systems. Following a scenario-driven approach, quantitative and qualitative methods are employed to elicit feedback from different target user populations. Based on the results of the different evaluation parts, a set of design requirements for future home entertainment systems is derived. These requirements are then used to guide the development process of a ubiquitous computing gaming platform. To demonstrate the usefulness of the gaming platform, a sample application is discussed, which is described in the last section of this paper.}},
author = {{Röcker, Carsten and Magerkurth, Carsten and Haar, Maral}},
booktitle = {{Universal Access in Ambient Intelligence Environments : 9th ERCIM Workshop on User Interfaces for All}},
editor = {{Stephanidis, Constantine and Pieper, Michael}},
isbn = {{978-3-540-71024-0}},
keywords = {{User Interfaces, Pervasive Games, Evaluation, System Development, Tangible User Interfaces, Human Computer Interaction}},
location = {{Königswinter (Bonn), Germany}},
pages = {{352--368}},
publisher = {{Springer}},
title = {{{User Interfaces for Pervasive Games: Experiences of a Formative Multi-Method Evaluation and its Implications for System Development}}},
doi = {{10.1007/978-3-540-71025-7_23}},
volume = {{4397}},
year = {{2006}},
}
@inproceedings{4814,
abstract = {{In this paper, we present the Smart Dice Cup, a novel interaction device aimed at gaming applications in smart home environments. The Smart Dice Cup is used in a similar way as a traditional leather dice cup to generate random numbers. Integrated accelerometers relate the shaking of the device to the resulting rolls of the dice. In addition to an autonomous stand-alone mode, where the Smart Dice Cup serves as self-sustained gaming system, the device is also capable of communicating with its surrounding environment serving as an input device for other pervasive gaming applications.}},
author = {{Magerkurth, Carsten and Engelke, Timo and Röcker, Carsten}},
booktitle = {{Entertainment Computing - ICEC 2006}},
editor = {{Harper, Richard and Rauterberg, Matthias and Combetto, Marco }},
isbn = {{978-3-540-45259-1}},
keywords = {{Interaction Device, Smart Home Environment, Pervasive Game, Remote Control Mode, Ambient Intelligence Environment}},
location = {{Cambridge, UK}},
pages = {{211--216}},
publisher = {{Springer}},
title = {{{The Smart Dice Cup: A Radio Controlled Sentient Interaction Device}}},
doi = {{10.1007/11872320_25}},
year = {{2006}},
}
@inproceedings{4815,
abstract = {{In this paper a concept is presented, that supports awareness and emotional communication between family members, distributed over multiple intelligent home environments. A technical communication infrastructure is presented, which allows connecting different types of input and output devices. This platform is extended by several examples of emotional user interfaces, which address the individual needs of different user groups}},
author = {{Etter, Richard and Röcker, Carsten and Gilgen, Daniel}},
booktitle = {{Proceedings of the Second International Conference on Intelligent Environments (IE’06)}},
isbn = {{978-0-86341-663-7}},
issn = {{0537-9989}},
keywords = {{User interfaces, Home computing, Automated buildings, Control engineering computing}},
location = {{Athens, Greece}},
pages = {{41--50}},
publisher = {{IET}},
title = {{{Supporting Emotional Communication between Multiple Users in Intelligent Home Environments}}},
doi = {{10.1049/cp:20060623}},
year = {{2006}},
}
@inproceedings{4816,
abstract = {{This paper presents a novel concept for personalized privacy support on large public displays in intelligent home environments. In order to validate the conceptual approach a system called SPIROS was developed. The SPIROS system automatically adapts the information visible on public displays according to the current social situation and the individual privacy preferences of the user working at the display.}},
author = {{Röcker, Carsten and Hinske, Steve and Magerkurth, Carsten}},
booktitle = {{Proceedings of the 2nd IET International Conference on Intelligent Environments : IE 06}},
isbn = {{978-0-86341-663-7}},
issn = {{0537-9989}},
keywords = {{computer displays, home automation, data privacy, user interfaces, home computing}},
location = {{Athens, Greece}},
pages = {{267--274}},
publisher = {{IEEE}},
title = {{{SPIROS - A System for Privacy-Enhanced Information Representation in Smart Home Environments}}},
doi = {{10.1049/cp:20060651}},
year = {{2006}},
}
@inproceedings{4817,
abstract = {{Over the last years, a variety of pervasive games was developed. Although some of these applications were quite successful in bringing digital games back to the real world, very little is known about their successful integration into smart environments. When developing video games, developers can make use of abroad variety of heuristics. Using these heuristics to guide the development process of applications for intelligent environments could significantly increase their functional quality. This paper addresses the question, whether existing heuristics can be used by pervasive game developers, or if specific design guidelines for smart home environments are required. In order to give an answer, the transferability of video game heuristics was evaluated in a two-step process. In a first step, a set of validated heuristics was analyzed to identify platform-dependent elements. In a second step, the transferability of those elements was assessed in a focus group study.}},
author = {{Röcker, Carsten and Haar, Maral}},
booktitle = {{Third International Workshop on Pervasive Gaming Applications (PerGames’06)}},
editor = {{Strang , Thomas}},
isbn = {{978-3-00-018411-6}},
keywords = {{Ubiquitous Computing, Ambient intelligence, videogame}},
location = {{Dublin, Ireland}},
pages = {{124--131}},
publisher = {{Deutsches Zentrum für Luft- und Raumfahrt}},
title = {{{Exploring the Usability of Video Game Heuristics for Pervasive Game Development in Smart Home Environments}}},
year = {{2006}},
}
@misc{4956,
author = {{Vetter, Andreas}},
publisher = {{Architekturgalerie am Weißenhof}},
title = {{{Peter Märkli (Zürich) - Zeichnungen zur Architektur}}},
year = {{2006}},
}
@misc{4957,
author = {{Vetter, Andreas}},
publisher = {{Architekturgalerie am Weißenhof}},
title = {{{Konversion - Transformation - Umbau}}},
year = {{2006}},
}
@misc{4958,
author = {{Vetter, Andreas}},
publisher = {{Architekturgalerie am Weißenhof}},
title = {{{Hans und Marlene Poelzig - Wohnarchitektur}}},
year = {{2006}},
}
@misc{4959,
author = {{Vetter, Andreas}},
publisher = {{Architekturgalerie am Weißenhof}},
title = {{{Viel Holz - Innovativer Holzbau zwischen Kochenhof und Weißenhof}}},
year = {{2006}},
}
@misc{4960,
author = {{Vetter, Andreas}},
publisher = {{Architekturgalerie am Weißenhof}},
title = {{{Rokokorelevanz - weiße wand}}},
year = {{2006}},
}
@misc{4961,
author = {{Vetter, Andreas}},
publisher = {{Architekturgalerie am Weißenhof}},
title = {{{Urbane Häuser - Jan Kleihues/Kleihues+Kleihues}}},
year = {{2006}},
}
@proceedings{5169,
editor = {{Pottgiesser, Uta and Knaack, Ulrich and Strauß, Holger}},
publisher = {{Hochschule Ostwestfalen-Lippe}},
title = {{{Fassade2006 : Sanierung und Erneuerung: Tagungsband}}},
year = {{2006}},
}
@article{5201,
author = {{Kabst, Rüdiger and Matiaske, Wenzel and Schmelter, Anja}},
issn = {{0143-831X}},
journal = {{Economic and Industrial Democracy}},
pages = {{565--585}},
title = {{{Financial Participation in British, French and German Organizations: A Neoinstitutionalist Perspective}}},
doi = {{10.1177/0143831x06068994}},
volume = {{Vol. 27 (4)}},
year = {{2006}},
}
@article{5399,
author = {{Carbon, Claus-Christian and Hutzler, Florian and Minge, Michael}},
journal = {{Psychology Science}},
pages = {{173--186}},
title = {{{Innovativeness in design investigated by eye movements and pupillometry}}},
volume = {{48(2)}},
year = {{2006}},
}
@misc{9770,
author = {{Mülder, Jochen and Stemmer, Boris}},
booktitle = {{CORP 2006: Sustainable Solutions for the Information Society : Proceedings of 11th international conference on Urban Planning and Spatial Development in the Information Society}},
editor = {{Schrenk, Manfred}},
isbn = {{978-3-9502139-0-4}},
location = {{Wien}},
pages = {{435–442}},
publisher = {{CORP - Competence Center of Urban and Regional Planning }},
title = {{{Unterstützung nachhaltiger Planung durch 3- und 4D Visualisierung mit World Construction Set und Visual Nature Studio}}},
year = {{2006}},
}
@inproceedings{6421,
author = {{Lilie, M. and Wilhelm, Patrick and Hein, S. and Müller, Ulrich}},
location = {{Berlin}},
title = {{{Fortschritte bei der mechanischen Sattdampfentkeimung}}},
year = {{2005}},
}
@inproceedings{6422,
author = {{Giefers, C. and Müller, Ulrich and Brocklehurst, T.}},
location = {{Berlin}},
title = {{{Untersuchungen zur Anhaftung von Mikroorganismen auf Gemüseoberflächen}}},
year = {{2005}},
}
@inproceedings{6423,
author = {{Wilhelm, Patrick and Giefers, C. and Lilie, M. and Müller, Ulrich}},
location = {{Berlin}},
title = {{{Kalkulation thermischer Entkeimungseffekte beim Lemgoer Sattdampfentkeimungsverfahren auf Basis realer Temperaturverläufe}}},
year = {{2005}},
}
@inproceedings{6424,
author = {{Müller, Ulrich and Chchtian, S. and Jordan, V. and Schlitter, K.}},
keywords = {{Poster}},
location = {{Berlin}},
title = {{{Zur Entwicklung einer Phytostoff-Tensid-Extraktion}}},
year = {{2005}},
}
@inproceedings{6425,
author = {{Hein, S. and Lilie, M. and Wilhelm, Patrick and Müller, Ulrich}},
location = {{Berlin}},
title = {{{Produktschonende Entkeimung mit Sattdampf – Betrachtungen zur Veränderung des Gehaltes und der Zusammensatzung von ätherischen Ölen am Beispiel von schwarzem Pfeffer}}},
year = {{2005}},
}
@inproceedings{6426,
author = {{Müller, Ulrich}},
location = {{Paderborn}},
title = {{{Veredeln von Nahrungsmitteln}}},
year = {{2005}},
}
@inproceedings{6427,
author = {{Müller, Ulrich}},
keywords = {{Vortrag}},
location = {{Paderborn}},
title = {{{Prozess-Entwicklung}}},
year = {{2005}},
}
@inproceedings{6428,
author = {{Müller, Ulrich}},
location = {{Dortmund}},
title = {{{Die mechanische Entkeimung von festen Lebensmitteln mittels Sattdampf}}},
year = {{2005}},
}
@inproceedings{6429,
author = {{Jordan, V. and Müller, Ulrich}},
location = {{Breslau}},
title = {{{Surfactants and Dispersed Systems in Theory and Practice}}},
year = {{2005}},
}
@inproceedings{6430,
author = {{Müller, Ulrich and Meyer, T.}},
location = {{Bielefeld}},
title = {{{Zur Entwicklung einer mechanischen Entkeimungsmethode von Lebensmittel- und Arzneimitteln}}},
year = {{2005}},
}
@inproceedings{6431,
author = {{Müller, Ulrich and Wilhelm, Patrick and Giefers, C. and Lilie, M.}},
keywords = {{auch Reprint}},
location = {{Dresden}},
title = {{{Stand der Untersuchungen zur mechanischen Sattdampfentkeimung}}},
year = {{2005}},
}
@inproceedings{6432,
author = {{Wilhelm, Patrick and Giefers, C. and Lilie, M. and Müller, Ulrich}},
location = {{Dresden}},
title = {{{Kalkulation thermischer Abtötungseffekte – Unterstützung bei der Auslegung von Entkeimungsprozessen}}},
year = {{2005}},
}
@inproceedings{6433,
author = {{Müller, Ulrich and Chchtian, S. and Jordan, V. and Schlitter, K.}},
keywords = {{Poster}},
location = {{Dresden}},
title = {{{Zur Entwicklung einer Phytostoff-Tensid-Extraktion}}},
year = {{2005}},
}
@article{6558,
author = {{Lohr, Mathias}},
issn = {{0723-6514}},
journal = {{Libellula}},
number = {{1/2}},
pages = {{87--107}},
title = {{{Libellenbeobachtungen in Südportugal (Odonata)}}},
volume = {{24}},
year = {{2005}},
}
@article{6559,
author = {{Lohr, Mathias}},
issn = {{0166-6584 }},
journal = {{Notulae Odonatologicae}},
number = {{6}},
pages = {{57--58}},
title = {{{Selysiothemis nigra (Vander Linden, 1825) new for Portugal (Anisoptera Libellulidae)}}},
year = {{2005}},
}
@article{6560,
author = {{Lohr, Mathias}},
issn = {{2747-7150}},
journal = {{Beiträge zur Naturkunde zwischen Egge und Weser}},
number = {{17}},
pages = {{75--80}},
title = {{{Das Naturschutzgebiet „Körbecker Bruch“ bei Körbecke}}},
year = {{2005}},
}
@article{6561,
author = {{Lohr, Mathias}},
issn = {{2747-7150 }},
journal = {{Beiträge zur Naturkunde zwischen Egge und Weser}},
number = {{17}},
pages = {{92--97}},
publisher = {{NEW}},
title = {{{Das Naturschutzgebiet „Auf dem Berenbruch“ bei Fürstenau}}},
year = {{2005}},
}
@article{6562,
abstract = {{Das zur Familie der Orchideen gehörende Dreizähnige Knabenkraut (Orchis tridentata Scop.) ist eine auffallende Pflanze unserer Kalk-Halbtrockenrasen. Ihretwegen besuchen alljährlich zahlreiche Orchideenfreunde unsere Region.
Manche Autoren führen den deutschen, wie auch den lateinischen Namen der Pflanze auf die spitz zulaufenden, nach außen gebogenen Zipfel der drei äußeren Blütenkronblätter zurück (www.orchideen-kartierung.de, AHO NRW 2001), andere auf die dreilappige Lippe (Baumann 2005; vgl. Abb. 1). Der Gattungsname (griechisch: Hoden) leitet sich von den an die Form von Hoden erinnernden Wurzelknollen der Pflanze ab.}},
author = {{Lohr, Mathias and Grawe, Frank}},
issn = {{2747-7150 }},
journal = {{Beiträge zur Naturkunde zwischen Egge und Weser }},
number = {{17}},
pages = {{3--74}},
publisher = {{NEW}},
title = {{{Das Dreizähnige Knabenkraut (Orchis tridentata) im Kreis Höxter}}},
year = {{2005}},
}
@book{7617,
author = {{Köhler, Martin and Heller, Slawomir and Schniering, Antonius}},
isbn = {{ 3-86509-221-7}},
publisher = {{Wirtschaftsverl. NW, Verl. für Neue Wiss.}},
title = {{{ Ergänzung der Bewertung des Straßenzustandes freier Strecken um eine gleichwertige Bewertung von Ortsdurchfahrten von Bundesstraßen : [Bericht zum Forschungs- und Entwicklungsvorhaben FE 09.129/2002/MRB]}}},
volume = {{909}},
year = {{2005}},
}
@inbook{11635,
author = {{Rohler, Hans-Peter and Fritz, Harald}},
booktitle = {{Masterplan Emscher Landschaftspark 2010}},
editor = {{Schwarze-Rodrian, Michael}},
isbn = {{978-3-89861-476-4}},
pages = {{226–249}},
publisher = {{Klartext-Verl. }},
title = {{{Entwicklungs- und Vegetationsmanagement}}},
year = {{2005}},
}
@misc{12068,
author = {{Bruns, Christina and Kutz, Gerd and Wilms, J.}},
location = {{Nürnberg}},
title = {{{A new manufacturing process for ISDN retard pellets: feasibility studies and risk assessment}}},
year = {{2005}},
}
@misc{12069,
author = {{Kardel, M. and Kutz, Gerd and Rosito, R. and von Zydowitz, H. }},
location = {{Nürnberg}},
title = {{{Quality and economic efficiency of inspection methods}}},
year = {{2005}},
}
@inproceedings{2057,
author = {{Lohweg, Volker and Schaede, Johannes}},
publisher = {{IHK Lippe zu Detmold}},
title = {{{Besser unscharf, aber genau als präzise und falsch! - Was hat Bildverarbeitung mit Banknoten zu tun?}}},
year = {{2005}},
}
@inproceedings{2058,
abstract = {{Nonlinear spatial transforms and fuzzy pattern classification with unimodal potential functions are established in signal processing. They have proved to be excellent tools in feature extraction and classification. In this paper we present a hardware accelerated image processing and classification scheme for rotation and translation tolerant two-dimensional pattern recognition, which is based on one-dimensional nonlinear discrete circular transforms. However, the scheme is simple; it is stable and therefore well suited for industrial applications. An implementation on one field programmable gate array (FPGA) is proposed.}},
author = {{Henke, Tobias and Lohweg, Volker}},
booktitle = {{IEEE International Conference On Image Processing (ICIP), Proceedings}},
isbn = {{0-7803-9134-9}},
issn = {{2381-8549 }},
keywords = {{Pattern recognition, Field programmable gate arrays, Neural networks, Image processing, Discrete transforms, Signal processing, Image retrieval, Image recognition, Transient analysis, Fuzzy systems}},
pages = {{349 -- 352}},
publisher = {{IEEE}},
title = {{{A Simplified Scheme For Hardware-Based Pattern Recognition}}},
doi = {{ 10.1109/ICIP.2005.1529759}},
year = {{2005}},
}
@misc{2347,
author = {{Frahm, Björn and Lane, Paul and Munack, Axel and Pörtner, Ralf}},
booktitle = {{Chemie Ingenieur Technik}},
issn = {{1522-2640}},
number = {{4}},
pages = {{429--435}},
publisher = {{WILEY-VCH Verlag}},
title = {{{Optimierung und Steuerung von Zellkultur-Fed-Batch-Prozessen mittels einer Kollokationsmethode}}},
doi = {{10.1002/cite.200407094}},
volume = {{77}},
year = {{2005}},
}
@inbook{2443,
author = {{Upmann, Matthias}},
booktitle = {{Chemisches und Veteriäruntersuchungsamt CVUA-OWL : Jahresbericht 2005}},
title = {{{Salmonellen in Lebensmitteln}}},
year = {{2005}},
}
@inproceedings{2488,
author = {{Upmann, Matthias}},
location = {{Rheda-Wiedenbrück}},
title = {{{Rechtliche Beurteilung von vorverpacktem Fleisch und Fleischerzeugnissen}}},
year = {{2005}},
}
@inproceedings{2680,
author = {{Kutz, Gerd}},
location = {{Neuenburg}},
title = {{{Verfahren zur Bestimmung von Partikel- bzw. Tröpfchengrößen in Emulsionssystemen}}},
year = {{2005}},
}
@phdthesis{2688,
author = {{Noosten, Dirk}},
isbn = {{978-3-86130-815-7}},
pages = {{198}},
publisher = {{Wissenschaftsverlag Mainz}},
title = {{{Die Unterdeckung Allgemeiner Geschäftskosten bei Bauablaufstörungen und Anwendung der VOB/B aus baubetriebswirtschaftlicher Sicht}}},
volume = {{18}},
year = {{2005}},
}
@article{2718,
author = {{Kutz, Gerd and Henning, Sabine and Bruns, Christiane}},
journal = {{PZ Prisma - Pharmazeutische Zeitung}},
number = {{4}},
pages = {{219--227}},
title = {{{Neue Hilfsstoffe für Dermatika- Vom galenischen Rohstoff zum wertsteigernden Additiv}}},
volume = {{12}},
year = {{2005}},
}
@article{4177,
author = {{Fettig, Joachim}},
issn = {{0003-7214}},
journal = {{Journal of Water Supply: Research and Technology - AQUA}},
pages = {{83--93}},
publisher = {{IWA Publishing}},
title = {{{Modelling the uptake of natural organic matter (NOM) by different granular sorbent media}}},
doi = {{10.2166/aqua.2005.0008}},
volume = {{54}},
year = {{2005}},
}
@article{4184,
author = {{Fassnacht, Axel and Fettig, Joachim and Lendt, Benno and Mundus, B.}},
issn = {{1436-6134}},
journal = {{DVGW energie | wasser-praxis}},
number = {{4}},
pages = {{38--42}},
publisher = {{Wirtschafts- und Verlagsgesellschaft Gas und Wasser}},
title = {{{Bachelor- und Masterstudiengänge an Fachhochschulen}}},
volume = {{56}},
year = {{2005}},
}
@inproceedings{4221,
author = {{Kutz, Gerd and Salzmann, Volker and Bruns, Christina and Henning, S.}},
keywords = {{Scientific lecture}},
location = {{Nürnberg}},
title = {{{Feasibility studies on emulsion manufacturing using the Co-Twister processing facility}}},
year = {{2005}},
}
@inproceedings{4223,
author = {{Generotzky, F. and Hennig, S. and Kutz, Gerd}},
keywords = {{Scientific poster}},
location = {{Nürnberg}},
title = {{{Heat distribution and determination of cold spots within a stopper treatment and transfer unit}}},
year = {{2005}},
}
@inproceedings{4224,
author = {{Nierychlok, N. and Kutz, Gerd}},
keywords = {{Scientific poster}},
location = {{Nürnberg}},
title = {{{Implementation of a computerised system for the monitoring of storage conditions within the scope of stability testing}}},
year = {{2005}},
}
@inproceedings{4226,
author = {{Brenner, S. and Hellweg, E. and Kutz, Gerd}},
keywords = {{Scientific poster}},
location = {{Nürnberg}},
title = {{{Comparative validation studies on microbial collecctors to be used in isolator systems }}},
year = {{2005}},
}
@inproceedings{4227,
author = {{Generotzky, F. and Kutz, Gerd and Luenz, N.}},
keywords = {{Scientific poster}},
location = {{Nürnberg}},
title = {{{Investigations on the CIP-System of the Lyophilisator GT 6750}}},
year = {{2005}},
}
@inproceedings{4228,
author = {{Kutz, Gerd}},
keywords = {{Vortrag}},
location = {{Neuenburg }},
title = {{{Verfahren zur Bestimmung von Partikel- bzw. Tröpfchengrößen in Emulsionssystemen}}},
year = {{2005}},
}
@article{4229,
author = {{Kutz, Gerd and Henning, S. and Bruns, c.}},
journal = {{PZ Prisma - Pharmazeutische Zeitung}},
number = {{4}},
pages = {{219--227}},
title = {{{Neue Hilfsstoffe für Dermatika - Vom galenischen Rohstoff zum wertsteigernden Additiv }}},
volume = {{12}},
year = {{2005}},
}
@inproceedings{4230,
author = {{Kutz, Gerd}},
keywords = {{Vortrag}},
location = {{Detmold}},
title = {{{Neue Rohstoffe für die Formulierung von Emulsionen }}},
year = {{2005}},
}
@inproceedings{4474,
author = {{Kutz, Gerd}},
location = {{Fachhochschule Lippe und Höxter in Detmold}},
title = {{{Innovationskonzhepte in Hautpflegemitteln: Entwicklungstrends, Formulierungsstrategien, Charaktersisierung}}},
year = {{2005}},
}
@inbook{4737,
author = {{Jasperneite, Jürgen}},
booktitle = {{Steuerungstechnik aktuell }},
publisher = {{Oldenbourg verlag}},
title = {{{Echtzeit-Ethernet im Überblick}}},
year = {{2005}},
}
@inproceedings{4738,
author = {{Trsek, Henning and Jasperneite, Jürgen and Meier, Uwe}},
booktitle = {{7. Wireless Kongress}},
title = {{{Bewertung des WLAN Standards 802.11e für den Einsatz in der industriellen Automatisierungetchnik}}},
year = {{2005}},
}
@inproceedings{4739,
author = {{Jasperneite, Jürgen and Feld, Joachim}},
booktitle = {{10th IEEE Internnational Conference on Emerging Technologies and Factoy Automation (ETFA2005)}},
title = {{{PROFINET: An Integration Platform for heterogeneous Industrial Communication Systems}}},
year = {{2005}},
}
@inproceedings{4740,
author = {{Jasperneite, Jürgen}},
booktitle = {{16th IFAC World Congress}},
title = {{{Fieldbus Integration to the Realtime Ethernet Standard PROFINET}}},
year = {{2005}},
}
@inbook{8107,
author = {{Oldenburg, Martin}},
booktitle = {{Betriebs- und Regenwassernutzung - Bestandsaufnahme und Zukunftsvision}},
isbn = {{3-9804111-9-2}},
pages = {{107--118}},
title = {{{Möglichkeiten der Betriebs- und Regenwassernutzung im Rahmen von neuen Sanitärkonzepten}}},
year = {{2005}},
}
@inbook{8182,
author = {{Oldenburg, Martin and Albold, Andrea and Reese, Katja}},
booktitle = {{17. Fachtagung Norddeutsche Tagung für Abwasserwirtschaft und Gewässerschutz }},
pages = {{S. 175--178}},
publisher = {{TU Hamburg-Harburg}},
title = {{{Belüftete Teichkläranlagen als kostengünstige Form der Abwasserreinigung in ländlich strukturierten Gebieten}}},
volume = {{51}},
year = {{2005}},
}
@inbook{8968,
author = {{Baetge, Jörg and Niemeyer, Kai and Kümmel, Jens}},
booktitle = {{Praxishandbuch der Unternehmensbewertung}},
editor = {{Peemöller, Volker H.}},
isbn = {{3-482-51183-7}},
pages = {{265--362 }},
publisher = {{NWB Verlag}},
title = {{{Darstellung der Discounted-Cashflow-Verfahren (DCF-Verfahren) mit Beispiel}}},
year = {{2005}},
}
@misc{9459,
author = {{Wilhelm, Patrick}},
booktitle = {{Lebensmitteltechnik}},
issn = {{0047-4290}},
number = {{37}},
pages = {{44 -- 45}},
publisher = {{LT Food Medien-Verlag GmbH}},
title = {{{Gesunde Ernährung. GVC und Dechema mit fünf Vortragsblöcken für das Life Science Engineering.}}},
year = {{2005}},
}
@inbook{2756,
author = {{Müller, Ulrich}},
booktitle = {{AiF Forschungsreport 2005}},
pages = {{50--51}},
title = {{{Entwicklung und Untersuchung eines kontinuierlichen und eines quasikontinuierlichen Sattdampfentkeimungsverfahrens für zerkleinerte pflanzliche Materialien}}},
year = {{2005}},
}
@book{2782,
author = {{Vetter, Andreas}},
isbn = {{9783934877429}},
keywords = {{Architektur / Stadt, Architekturfotografie, Fotografie, Kommunikation / Medien}},
publisher = {{Manutius-Verl.}},
title = {{{Leere Welt: Über das Verschwinden des Menschen aus der Architekturfotografie}}},
year = {{2005}},
}
@book{2784,
author = {{Lehmbruck, Manfred and Vetter, Andreas and Krisch, R.}},
isbn = {{3887782917}},
keywords = {{Architektur, Architekturtheorie, Museumsbau}},
publisher = {{Dt. Spurbuchverl.}},
title = {{{Manfred Lehmbruck - Architektur um 1960: [Architekturgalerie am Weissenhof, 09/02 - 03/2005]}}},
year = {{2005}},
}
@article{2790,
author = {{Noosten, Dirk}},
issn = {{0342-5169}},
journal = {{Hoch- & Tiefbau : die Fachzeitschrift der Bauwirtschaft }},
number = {{12}},
pages = {{44--45}},
publisher = {{HE Verlag für Fachinformationen}},
title = {{{Entstehung und Erstattungsfähigkeit der Allgemeinen Geschäftskosten bei Bauablaufstörungen}}},
volume = {{58}},
year = {{2005}},
}
@article{2791,
author = {{Noosten, Dirk}},
issn = {{2195-9730}},
journal = {{Baumarkt + Bauwirtschaft }},
number = {{11}},
pages = {{45--47}},
publisher = {{Bauverlag}},
title = {{{Die Opitz'sche Kalkulation über die Angebotssumme und ihre Problematik}}},
volume = {{104}},
year = {{2005}},
}
@article{2792,
author = {{Noosten, Dirk}},
issn = {{2195-9730 }},
journal = {{Baumarkt und Bauwirtschaft }},
number = {{10}},
pages = {{34--36}},
publisher = {{Bauverlag}},
title = {{{Auf Kostenarten bezogene Zuschlagssätze im Rahmen der "Kalkulation über die Angebotssumme"}}},
volume = {{104}},
year = {{2005}},
}
@inproceedings{2794,
author = {{Noosten, Dirk}},
booktitle = {{Konfliktvermeidung & Methoden der Streitbeilegung : Tagungsband }},
editor = {{Nöstlthaller, Reinhild}},
isbn = {{978-3-902465-13-9}},
location = {{Graz}},
publisher = {{Verlag der Technischen Universität Graz}},
title = {{{Die Berücksichtigung der Allgemeinen Geschäftskosten in der Kalkulation und ihre Bedeutung bei Bauablaufstörungen}}},
year = {{2005}},
}
@inproceedings{2795,
author = {{Noosten, Dirk}},
booktitle = {{Tagungsband zum 16. Treffen der Universitätsassistenten für Bauwirtschaft, Baubetrieb und Bauverfahrenstechnik in Dortmund vom 09. bis 11. März 2005}},
location = {{Dortmund}},
publisher = {{Universität Dortmund, Fakultät Bauwesen, Lehrstuhl Baubetrieb}},
title = {{{Die Unterdeckung Allgemeiner Geschäftskosten bei Bauablaufstörungen}}},
year = {{2005}},
}
@misc{2813,
author = {{Frahm, Björn and Pörtner, R.}},
booktitle = {{Animal Cell Technology Meets Genomics}},
isbn = {{1-4020-2791-5}},
location = {{Granada}},
pages = {{693--695}},
publisher = {{Springer}},
title = {{{Flexible Fed-Batch Process Control of Animal Cells}}},
doi = {{10.1007/1-4020-3103-3_142}},
volume = {{vol. 2}},
year = {{2005}},
}
@inbook{2831,
abstract = {{Kapitel V2}},
author = {{Müller, Ulrich and Lilie, Markus and Hein, Sven}},
booktitle = {{Handbuch Lebensmittelhygiene }},
title = {{{Physikalische Verfahren}}},
year = {{2005}},
}
@article{2840,
author = {{Stiebing, Achim and Müller, Ulrich and Hegerding, Lars and Wilhelm, Patrick}},
issn = {{0015-363X}},
journal = {{Fleischwirtschaft}},
number = {{3}},
pages = {{119--123}},
publisher = {{ Deutscher Fachverlag GmbH}},
title = {{{Dekontamination von Fleischoberflächen mittels Kurzzeitdampfverfahren - Entkeimungswirkung versus Vergrauung}}},
volume = {{85}},
year = {{2005}},
}
@book{2866,
editor = {{Vetter, Andreas}},
isbn = {{3-89986-069-1}},
publisher = {{avedition}},
title = {{{UN Studio - Mercedes-Benz-Museum : Wechsel Raum, Bund Deutscher Architekten, Bda}}},
year = {{2005}},
}
@misc{2907,
author = {{Pörtner, Ralf and Frahm, Björn and Lane, P. and Munack, A.}},
location = {{Harrogate, UK}},
title = {{{Optimisation of time-space-yield for hybridoma fed-batch cultures with an adaptive OLFO-controller}}},
year = {{2005}},
}
@misc{2908,
author = {{Pörtner, R. and Frahm, Björn and Hass, V. C. and Lane, P. and Munack, A.}},
location = {{Wiesbaden, Germany}},
title = {{{Optimierung und Steuerung von Zellkultur-Fed-Batch-Prozessen mittels einer Kollokationsmethode}}},
year = {{2005}},
}
@inproceedings{2935,
author = {{Materna, Daniel and Barthold, Franz-Joseph}},
location = {{Bochum}},
title = {{{Interaction of Structural Optimization and Configurational Mechanics}}},
year = {{2005}},
}
@inbook{3040,
author = {{Austermann-Haun, Ute}},
booktitle = {{Anaerobtechnik}},
editor = {{Bischofsberger, W. and Dichtl, N. and Rosenwinkel, K.-H. and Seyfried, C.-F. and Böhnke, B.}},
isbn = {{3-540-06850-3}},
pages = {{426 -- 436}},
publisher = {{Springer}},
title = {{{Pektinfabriken}}},
year = {{2005}},
}
@inbook{3041,
author = {{Austermann-Haun, Ute}},
booktitle = {{Anaerobtechnik}},
editor = {{Bischofsberger, W. and Dichtl, N. and Rosenwinkel, K.-H. and Seyfried, C. F. and Böhnke, B.}},
isbn = {{3-540-06850-3}},
pages = {{355 -- 363}},
publisher = {{Springer}},
title = {{{Erfrischungsgetränkeindustrie}}},
year = {{2005}},
}
@article{3096,
author = {{Lange, M. and Thies, F. and Austermann-Haun, Ute and Klick, K. and Witte, Heike}},
journal = {{KA Korrespondenz Abwasser Abfall}},
number = {{2}},
pages = {{184 -- 189}},
title = {{{Landesweites Datenverarbeitungskonzept für Kleinkläranlagen und dessen Umsetzung am Beispiel der landeseigenen Software AKoPro}}},
volume = {{52}},
year = {{2005}},
}
@article{3097,
author = {{Brinkmeyer, J. and Rosenwinkel, K.-H. and Flasche, K. and Koppmann, M. and Austermann-Haun, Ute}},
journal = {{KA Korrespondenz Abwasser Abfall}},
number = {{2}},
pages = {{158 -- 163}},
title = {{{Einsatz und Erfahrungen mit Membranbiologien im ländlichen Raum}}},
volume = {{52}},
year = {{2005}},
}
@inproceedings{3110,
author = {{Meyer, H. and Austermann-Haun, Ute}},
location = {{Hannover}},
title = {{{Verfahrenstechniken zur anaeroben Behandlung von Abwässern}}},
year = {{2005}},
}
@inproceedings{3159,
author = {{Austermann-Haun, Ute}},
location = {{Korba, Tunesia}},
title = {{{Abwasserreinigung im ländlichen Raum}}},
year = {{2005}},
}
@inproceedings{3160,
author = {{Austermann-Haun, Ute}},
location = {{Fortaleza, Brazil}},
title = {{{Kostensenkungspotentiale durch innerbetrieblichen Umweltschutz}}},
year = {{2005}},
}