22 Publikationen
2022 | Konferenz - Beitrag | ELSA-ID: 11166
P. Sehr, N. Moriz, M. Heinz-Jakobs, and H. Trsek, “Am I Done Learning? - Determining Learning States in Adaptive Assembly Systems,” presented at the 27th International Conference on Emerging Technologies and Factory Automation (ETFA), Stuttgart, 2022. doi: 10.1109/ETFA52439.2022.9921676.
ELSA
| DOI
2022 | Konferenz - Beitrag | ELSA-ID: 11161
A. Mankowski, D. Antonow, N. Moriz, and H. Trsek, “Kognitive Automations-Architektur für Cyber-Physische-Produktionssysteme (CPPS),” in Automation 2022, Baden-Baden, 2022, no. 2399, pp. 219–230.
ELSA
2021 | Zeitschriftenaufsatz | ELSA-ID: 6839
B. G. Sürmeli, I. Weishaupt, K. Schwarzer, N. Moriz, and J. Schneider, “Heat impact control in flash pasteurization by estimation of applied pasteurization units using near infrared spectroscopy,” Journal of Near Infrared Spectroscopy, vol. 29, no. 6, pp. 339–351, 2021, doi: 10.1177/09670335211057233.
ELSA
| DOI
| WoS
2021 | Zeitschriftenaufsatz (wiss.) | ELSA-ID: 11155
A. Mankowski, P. Priss, J. Suton, N. Moriz, and H. Trsek, “Projekt DEVEKOS nach vier Jahren erfolgreich abgeschlossen : Neue objektbasierte I4.0-Maschinenarchitektur,” Produktion : Technik und Wirtschaft für die deutsche Industrie , no. 16, p. 19, 2021.
ELSA
| Dateien verfügbar
2021 | Konferenz - Beitrag | ELSA-ID: 11157
P. Sehr, N. Moriz, M. Heinz-Jakobs, and H. Trsek, “Model-based approach for adaptive assembly assistance,” presented at the 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), Vasteras, Sweden , 2021. doi: 10.1109/ETFA45728.2021.9613614.
ELSA
| DOI
2021 | Zeitschriftenaufsatz (wiss.) | ELSA-ID: 12800
J. Strohschein, A. Fischbach, A. Bunte, H. Faeskorn-Woyke, N. Moriz, and T. Bartz-Beielstein, “Cognitive capabilities for the CAAI in cyber-physical production systems,” The International Journal of Advanced Manufacturing Technology, vol. 115, no. 11–12, pp. 3513–3532, 2021, doi: 10.1007/s00170-021-07248-3.
ELSA
| DOI
| WoS
2020 | Konferenz - Beitrag | ELSA-ID: 4512
C. Geng, N. Moriz, A. Bunte, and H. Trsek, “Concept for Rule-Based Information Aggregation in Modular Production Plants,” in KommA 2020 – Jahreskolloquium Kommunikation in der Automation, Lemgo, 2020.
ELSA
2020 | Konferenz - Beitrag | ELSA-ID: 4513
A. Bunte, H. Ressler, and N. Moriz, “Automated Detection of Production Cycles in Production Plants using Machine Learning,” in 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , Wien, 2020.
ELSA
2020 | Zeitschriftenaufsatz | ELSA-ID: 4518
A. Fischbach et al., “CAAI -- A Cognitive Architecture to Introduce Artificial Intelligence in Cyber-Physical Production Systems,” The International Journal of Advanced Manufacturing Technology, vol. 111, no. 1/2, pp. 609–626, 2020, doi: 10.1007/s00170-020-06094-z.
ELSA
| DOI
| WoS
2020 | Sammelwerk - Beitrag | ELSA-ID: 4797
S. Hinrichsen, N. Moriz, and M. Bornewasser, “Entwicklungstrends in der Montage,” in Informatorische Assistenzsysteme in der variantenreichen Montage: Theorie und Praxis, M. Bornewasser and S. Hinrichsen, Eds. Berlin, Heidelberg: Springer Vieweg, 2020, pp. 187–213.
ELSA
| DOI
2019 | Konferenz - Beitrag | ELSA-ID: 4780
A. Bunte et al., “Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS,” in 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2019.
ELSA
2019 | Konferenz - Beitrag | ELSA-ID: 4800
P. Sehr and N. Moriz, “Partitioning Manual Assembly Workstations for Flexible Manufacturing,” in Proceedings 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2019.
ELSA
2019 | Konferenz - Beitrag | ELSA-ID: 4801
P. Sehr, N. Moriz, S. Bendzioch, and S. Hinrichsen, “Ansätze für Komplexitätsreduktion in manuellen Montageprozessen,” in AUTOMATION 2019: Autonomous Systems and 5G in Connected Industries, 2019, pp. 671–682.
ELSA
2015 | Konferenz - Beitrag | ELSA-ID: 4802
B. Böttcher, N. Moriz, and O. Niggemann, “Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf,” in Automation 2015, 2015.
ELSA
2014 | Konferenz - Beitrag | ELSA-ID: 4803
N. Moriz, B. Böttcher, O. Niggemann, and J. Lackhove, “Assisted Design for Automation Systems - from Formal Requirements to Final Designs,” in 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2014.
ELSA
2014 | Konferenz - Beitrag | ELSA-ID: 4804
B. Böttcher, N. Moriz, and O. Niggemann, “From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach,” in 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014, 2014, pp. 977–978.
ELSA
2013 | Konferenz - Beitrag | ELSA-ID: 4805
B. Böttcher, J. Badinger, N. Moriz, and O. Niggemann, “Design of Industrial Automation Systems - Formal Requirements in the Engineering Process,” in 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2013.
ELSA
2013 | Konferenz - Beitrag | ELSA-ID: 4806
N. Schetinin, N. Moriz, B. Kumar, S. Faltinski, O. Niggemann, and A. Maier, “Why do verification approaches in automation rarely use HIL-test?,” in International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, , 2013.
ELSA
2012 | Konferenz - Beitrag | ELSA-ID: 4807
S. Faltinski, N. Moriz, N. Schetinin, and O. Niggemann, “AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. ,” in AUTOMATION 2012, 2012.
ELSA
2012 | Konferenz - Beitrag | ELSA-ID: 4808
S. Faltinski, O. Niggemann, N. Moriz, and A. Mankowski, “AutomationML: From Data Exchange to System Planning and Simulation,” in 2012 IEEE International Conference on Industrial Technology (ICIT), 2012.
ELSA
2011 | Konferenz - Beitrag | ELSA-ID: 4809
O. Gräser, B. Kumar, N. Moriz, A. Maier, and O. Niggemann, “AutomationML as a Basis for Offline- and Realtime-Simulation,” 2011.
ELSA
2011 | Konferenz - Beitrag | ELSA-ID: 4810
N. Moriz, S. Faltinski, O. Gräser, O. Niggemann, M. Barth, and A. Fay, “Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML,” in VDI Kongress AUTOMATION 2011 , 2011.
ELSA
Suche
Publikationen filtern
Darstellung / Sortierung
Export / Einbettung
22 Publikationen
2022 | Konferenz - Beitrag | ELSA-ID: 11166
P. Sehr, N. Moriz, M. Heinz-Jakobs, and H. Trsek, “Am I Done Learning? - Determining Learning States in Adaptive Assembly Systems,” presented at the 27th International Conference on Emerging Technologies and Factory Automation (ETFA), Stuttgart, 2022. doi: 10.1109/ETFA52439.2022.9921676.
ELSA
| DOI
2022 | Konferenz - Beitrag | ELSA-ID: 11161
A. Mankowski, D. Antonow, N. Moriz, and H. Trsek, “Kognitive Automations-Architektur für Cyber-Physische-Produktionssysteme (CPPS),” in Automation 2022, Baden-Baden, 2022, no. 2399, pp. 219–230.
ELSA
2021 | Zeitschriftenaufsatz | ELSA-ID: 6839
B. G. Sürmeli, I. Weishaupt, K. Schwarzer, N. Moriz, and J. Schneider, “Heat impact control in flash pasteurization by estimation of applied pasteurization units using near infrared spectroscopy,” Journal of Near Infrared Spectroscopy, vol. 29, no. 6, pp. 339–351, 2021, doi: 10.1177/09670335211057233.
ELSA
| DOI
| WoS
2021 | Zeitschriftenaufsatz (wiss.) | ELSA-ID: 11155
A. Mankowski, P. Priss, J. Suton, N. Moriz, and H. Trsek, “Projekt DEVEKOS nach vier Jahren erfolgreich abgeschlossen : Neue objektbasierte I4.0-Maschinenarchitektur,” Produktion : Technik und Wirtschaft für die deutsche Industrie , no. 16, p. 19, 2021.
ELSA
| Dateien verfügbar
2021 | Konferenz - Beitrag | ELSA-ID: 11157
P. Sehr, N. Moriz, M. Heinz-Jakobs, and H. Trsek, “Model-based approach for adaptive assembly assistance,” presented at the 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), Vasteras, Sweden , 2021. doi: 10.1109/ETFA45728.2021.9613614.
ELSA
| DOI
2021 | Zeitschriftenaufsatz (wiss.) | ELSA-ID: 12800
J. Strohschein, A. Fischbach, A. Bunte, H. Faeskorn-Woyke, N. Moriz, and T. Bartz-Beielstein, “Cognitive capabilities for the CAAI in cyber-physical production systems,” The International Journal of Advanced Manufacturing Technology, vol. 115, no. 11–12, pp. 3513–3532, 2021, doi: 10.1007/s00170-021-07248-3.
ELSA
| DOI
| WoS
2020 | Konferenz - Beitrag | ELSA-ID: 4512
C. Geng, N. Moriz, A. Bunte, and H. Trsek, “Concept for Rule-Based Information Aggregation in Modular Production Plants,” in KommA 2020 – Jahreskolloquium Kommunikation in der Automation, Lemgo, 2020.
ELSA
2020 | Konferenz - Beitrag | ELSA-ID: 4513
A. Bunte, H. Ressler, and N. Moriz, “Automated Detection of Production Cycles in Production Plants using Machine Learning,” in 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , Wien, 2020.
ELSA
2020 | Zeitschriftenaufsatz | ELSA-ID: 4518
A. Fischbach et al., “CAAI -- A Cognitive Architecture to Introduce Artificial Intelligence in Cyber-Physical Production Systems,” The International Journal of Advanced Manufacturing Technology, vol. 111, no. 1/2, pp. 609–626, 2020, doi: 10.1007/s00170-020-06094-z.
ELSA
| DOI
| WoS
2020 | Sammelwerk - Beitrag | ELSA-ID: 4797
S. Hinrichsen, N. Moriz, and M. Bornewasser, “Entwicklungstrends in der Montage,” in Informatorische Assistenzsysteme in der variantenreichen Montage: Theorie und Praxis, M. Bornewasser and S. Hinrichsen, Eds. Berlin, Heidelberg: Springer Vieweg, 2020, pp. 187–213.
ELSA
| DOI
2019 | Konferenz - Beitrag | ELSA-ID: 4780
A. Bunte et al., “Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS,” in 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2019.
ELSA
2019 | Konferenz - Beitrag | ELSA-ID: 4800
P. Sehr and N. Moriz, “Partitioning Manual Assembly Workstations for Flexible Manufacturing,” in Proceedings 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2019.
ELSA
2019 | Konferenz - Beitrag | ELSA-ID: 4801
P. Sehr, N. Moriz, S. Bendzioch, and S. Hinrichsen, “Ansätze für Komplexitätsreduktion in manuellen Montageprozessen,” in AUTOMATION 2019: Autonomous Systems and 5G in Connected Industries, 2019, pp. 671–682.
ELSA
2015 | Konferenz - Beitrag | ELSA-ID: 4802
B. Böttcher, N. Moriz, and O. Niggemann, “Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf,” in Automation 2015, 2015.
ELSA
2014 | Konferenz - Beitrag | ELSA-ID: 4803
N. Moriz, B. Böttcher, O. Niggemann, and J. Lackhove, “Assisted Design for Automation Systems - from Formal Requirements to Final Designs,” in 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2014.
ELSA
2014 | Konferenz - Beitrag | ELSA-ID: 4804
B. Böttcher, N. Moriz, and O. Niggemann, “From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach,” in 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014, 2014, pp. 977–978.
ELSA
2013 | Konferenz - Beitrag | ELSA-ID: 4805
B. Böttcher, J. Badinger, N. Moriz, and O. Niggemann, “Design of Industrial Automation Systems - Formal Requirements in the Engineering Process,” in 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2013.
ELSA
2013 | Konferenz - Beitrag | ELSA-ID: 4806
N. Schetinin, N. Moriz, B. Kumar, S. Faltinski, O. Niggemann, and A. Maier, “Why do verification approaches in automation rarely use HIL-test?,” in International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, , 2013.
ELSA
2012 | Konferenz - Beitrag | ELSA-ID: 4807
S. Faltinski, N. Moriz, N. Schetinin, and O. Niggemann, “AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. ,” in AUTOMATION 2012, 2012.
ELSA
2012 | Konferenz - Beitrag | ELSA-ID: 4808
S. Faltinski, O. Niggemann, N. Moriz, and A. Mankowski, “AutomationML: From Data Exchange to System Planning and Simulation,” in 2012 IEEE International Conference on Industrial Technology (ICIT), 2012.
ELSA
2011 | Konferenz - Beitrag | ELSA-ID: 4809
O. Gräser, B. Kumar, N. Moriz, A. Maier, and O. Niggemann, “AutomationML as a Basis for Offline- and Realtime-Simulation,” 2011.
ELSA
2011 | Konferenz - Beitrag | ELSA-ID: 4810
N. Moriz, S. Faltinski, O. Gräser, O. Niggemann, M. Barth, and A. Fay, “Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML,” in VDI Kongress AUTOMATION 2011 , 2011.
ELSA